+
+/* Non-CORE DPLL rate set code */
+
+/*
+ * omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the supplied M, N values, and wait for the DPLL to
+ * lock.. Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
+{
+ struct dpll_data *dd = clk->dpll_data;
+ u32 v;
+
+ /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+ _omap3_noncore_dpll_bypass(clk);
+
+ v = __raw_readl(dd->mult_div1_reg);
+ v &= ~(dd->mult_mask | dd->div1_mask);
+
+ /* Set mult (M), div1 (N), freqsel */
+ v |= m << __ffs(dd->mult_mask);
+ v |= n << __ffs(dd->div1_mask);
+ v |= freqsel << __ffs(dd->freqsel_mask);
+
+ __raw_writel(v, dd->mult_div1_reg);
+
+ /* We let the clock framework set the other output dividers later */
+
+ /* REVISIT: Set ramp-up delay? */
+
+ _omap3_noncore_dpll_lock(clk);
+
+ return 0;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate - set non-core DPLL rate
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Program the DPLL with the rounded target rate. Returns -EINVAL upon
+ * error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
+{
+ u16 freqsel;
+ struct dpll_data *dd;
+
+ if (!clk || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (rate == omap2_get_dpll_rate(clk))
+ return 0;
+
+ if (dd->last_rounded_rate != rate)
+ omap2_dpll_round_rate(clk, rate);
+
+ if (dd->last_rounded_rate == 0)
+ return -EINVAL;
+
+ freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+ if (!freqsel)
+ WARN_ON(1);
+
+ omap3_noncore_dpll_program(clk, dd->last_rounded_m, dd->last_rounded_n,
+ freqsel);
+
+ omap3_dpll_recalc(clk);
+
+ return 0;
+}
+
+static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
+{
+ /*
+ * According to the 12-5 CDP code from TI, "Limitation 2.5"
+ * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+ * on DPLL4.
+ */
+ if (omap_rev() == OMAP3430_REV_ES1_0) {
+ printk(KERN_ERR "clock: DPLL4 cannot change rate due to "
+ "silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+ return omap3_noncore_dpll_set_rate(clk, rate);
+}
+