]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/log
linux-2.6-omap-h63xx.git
15 years agoOMAP clock: drop clk_get_usecount()
Paul Walmsley [Wed, 7 Jan 2009 15:23:45 +0000 (17:23 +0200)]
OMAP clock: drop clk_get_usecount()

This function is race-prone and mistakenly conveys the impression to
drivers that it is part of the clock interface.  Get rid of it: core
code that absolutely needs this can just check clk->usecount.  Drivers
should not use it at all.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoOMAP2/3 clock: convert remaining MPU barriers into OCP barriers
Paul Walmsley [Wed, 7 Jan 2009 15:23:45 +0000 (17:23 +0200)]
OMAP2/3 clock: convert remaining MPU barriers into OCP barriers

Several parts of the OMAP2/3 clock code use wmb() to try to ensure
that the hardware write completes before continuing.  This approach is
problematic: wmb() only ensures that the write leaves the ARM.  It
does not ensure that the write actually reaches the endpoint device.
The endpoint device in this case - either the PRM, CM, or SCM - is
three interconnects away from the ARM - and the final interconnect is
low-speed.  And the OCP interconnects will post the write, and who
knows how long that will take to complete.  So the wmb() is not what
we want.  Worse, the wmb() is indiscriminate; it causes the ARM to
flush any other unrelated buffered writes and wait for the local
interconnect to acknowledge them - potentially very expensive.

Fix this by converting the wmb()s into readbacks of the same PRM/CM/SCM
register.  Since the PRM/CM/SCM devices use a single OCP thread, this
will cause the MPU to block while waiting for posted writes to that device
to complete.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoOMAP2xxx clock: consolidate DELAYED_APP clock commits; fix barrier
Paul Walmsley [Wed, 7 Jan 2009 15:23:45 +0000 (17:23 +0200)]
OMAP2xxx clock: consolidate DELAYED_APP clock commits; fix barrier

Consolidate the commit code for DELAYED_APP clocks into a subroutine,
_omap2xxx_clk_commit().  Also convert the MPU barrier wmb() into an
OCP barrier, since with an MPU barrier, we have no guarantee that the
write actually reached the endpoint device.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoOMAP2/3 clock: don't use a barrier after clk_disable()
Paul Walmsley [Wed, 7 Jan 2009 15:23:21 +0000 (17:23 +0200)]
OMAP2/3 clock: don't use a barrier after clk_disable()

clk_disable() previously used an ARM barrier, wmb(), to try to ensure
that the hardware write completed before continuing.  There are some
problems with this approach.

The first problem is that wmb() only ensures that the write leaves the
ARM -- not that it actually reaches the endpoint device.  In this
case, the endpoint device - either the PRM, CM, or SCM - is three
interconnects away from the ARM, and the final interconnect is
low-speed.  And the OCP interconnects will post the write, who knows
how long that will take to complete.  So the wmb() is not really what
we want.

Worse, the wmb() is indiscriminate; it will cause the ARM to flush any
other unrelated buffered writes and wait for the local interconnect to
acknowledge them - potentially very expensive.

This first problem could be fixed by doing a readback of the same PRM/CM/SCM
register.  Since these devices use a single OCP thread, this will cause the
MPU to wait for the write to complete.

But the primary problem is a conceptual one: clk_disable() should not
need any kind of barrier.  clk_enable() needs one since device driver
code must not access a device until its clocks are known to be
enabled.  But clk_disable() has no such restriction.

Since blocking the MPU on a PRM/CM/SCM write can be a very
high-latency operation - several hundred MPU cycles - it's worth
avoiding this barrier if possible.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoOMAP clock: rearrange clock.h structure order
Russell King [Wed, 7 Jan 2009 15:23:21 +0000 (17:23 +0200)]
OMAP clock: rearrange clock.h structure order

... to eliminate unnecessary padding.  We have rather a lot of these
structures, so eliminating unnecessary padding results in a saving of
1488 bytes.

[paul@pwsan.com: updated against current linux-omap clock tree, now saves
1512 bytes on OMAP3 builds]

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoOMAP2/3 clock: remove clk->owner
Russell King [Wed, 7 Jan 2009 15:20:26 +0000 (17:20 +0200)]
OMAP2/3 clock: remove clk->owner

clk->owner is always NULL, so its existence doesn't serve any useful
function other than bloating the kernel by 992 bytes.  Remove it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoOMAP2 clock: drop CONFIG_PARTICIPANT clock flag
Paul Walmsley [Wed, 7 Jan 2009 15:20:25 +0000 (17:20 +0200)]
OMAP2 clock: drop CONFIG_PARTICIPANT clock flag

The CONFIG_PARTICIPANT flags indicates to the clock rate and parent
changing functions that they should not be used on this clock.  Better
just to remove the clock function pointers that operate on those
clocks.  The name of the flag is just terrible: its meaning has almost
nothing to do with its name, and the use of the CONFIG_ prefix makes
it appear to be a Kconfig option.  Get rid of it.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoOMAP clock: remove VIRTUAL_CLOCK
Russell King [Wed, 7 Jan 2009 15:20:25 +0000 (17:20 +0200)]
OMAP clock: remove VIRTUAL_CLOCK

Nothing tests the clock flags for this bit, so it serves no purpose.
Remove it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoOMAP clock: drop RATE_FIXED
Paul Walmsley [Wed, 7 Jan 2009 15:20:25 +0000 (17:20 +0200)]
OMAP clock: drop RATE_FIXED

The RATE_FIXED flag currently has no useful purpose.  Fixed rate clocks
should simply not implement the recalc, set_rate, set_parent, and round_rate
function pointers.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoOMAP clock: drop the RATE_PROPAGATES flag
Paul Walmsley [Wed, 7 Jan 2009 15:20:25 +0000 (17:20 +0200)]
OMAP clock: drop the RATE_PROPAGATES flag

Now that clocks keep track of their children, the RATE_PROPAGATES flag
is no longer necessary.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoOMAP clock: track child clocks
Paul Walmsley [Wed, 7 Jan 2009 15:20:24 +0000 (17:20 +0200)]
OMAP clock: track child clocks

Track child clocks for each struct clk.  This optimizes traversals of the
clock tree from parent to child, which happens during rate propagation, and
in the future, clock notifiers.

Previously, parent-to-child traversals sequentially scanned the entire
clock list at each step to determine the children of a particular
clock node.  Now each struct clk maintains a clock list of its
children.  For a DPLL3_M2_CK rate change, this converts what were
about O(6*180*2) operations into O(6*6*2) operations.  The savings
will be even more significant after the future notifier patches:
something like O(6*180*6) to O(6*6*6).

The price paid is additional runtime memory consumption - 8 bytes per
clock and 16 bytes per child clock - roughly 4.5KiB on OMAP3.  The
memory comes mostly from bootmem, since initial clock registration
takes place before slab is ready.  Several other operations will take
slightly more time due the extra bookkeeping: clk_register(),
clk_unregister(), clk_set_parent(), and omap2_init_clksel_parent().

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoOMAP clock: support "dry run" rate and parent changes
Paul Walmsley [Wed, 7 Jan 2009 15:20:24 +0000 (17:20 +0200)]
OMAP clock: support "dry run" rate and parent changes

For upcoming notifier support, modify the rate recalculation code to
take parent rate and rate storage parameters.  The goal here is to
allow the clock code to determine what the clock's rate would be after
a parent change or a rate change, without actually changing the
hardware registers.  This is used by the upcoming notifier patches to
pass a clock's current and planned rates to the notifier callbacks.

Also add a new clock flag, RECALC_ON_ENABLE, which causes the clock
framework code to recalculate the current clock's rate and propagate
down the tree after a clk_enable() or clk_disable().  This is used by
the OMAP3 DPLLs, which change rates when they enable or disable, unlike
most clocks.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoOMAP2/3 clock: drop recalc function pointers from fixed rate clocks
Paul Walmsley [Wed, 7 Jan 2009 15:20:23 +0000 (17:20 +0200)]
OMAP2/3 clock: drop recalc function pointers from fixed rate clocks

Now that rate recalculation and rate propagation are two separate
operations, drop recalc function pointers from all fixed rate clocks.
Their rates are fixed, so there's no need to recalculate.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoOMAP clock: move rate recalc, propagation code up to plat-omap/clock.c
Paul Walmsley [Wed, 7 Jan 2009 15:20:23 +0000 (17:20 +0200)]
OMAP clock: move rate recalc, propagation code up to plat-omap/clock.c

Previously the individual clock recalculation functions handled their
own rate recalculation.  This can be handled in the clk_set_rate(),
clk_set_parent(), and recalculate_root_clocks() functions in
plat-omap/clock.c.  Removes duplicate code and clarifies the role of the
recalc functions.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoOMAP2/3 clock: use standard set_rate fn in omap2_clk_arch_init()
Paul Walmsley [Wed, 7 Jan 2009 15:20:23 +0000 (17:20 +0200)]
OMAP2/3 clock: use standard set_rate fn in omap2_clk_arch_init()

Use the standard clk_set_rate() function in omap2_clk_arch_init()
rather than omap2_select_table_rate() -- this will ensure that clock
rates are recalculated and propagated correctly after those operations
are consolidated into clk_set_rate().

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoomap mmc: remove duplicated #include's
Huang Weiyi [Sun, 4 Jan 2009 03:13:52 +0000 (11:13 +0800)]
omap mmc: remove duplicated #include's

Removed duplicated #include's in arch/arm/mach-omap1/board-voiceblue.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoARM: OMAP: Fix gpio by switching to generic gpio calls
Jarkko Nikula [Wed, 7 Jan 2009 10:54:34 +0000 (12:54 +0200)]
ARM: OMAP: Fix gpio by switching to generic gpio calls

Fix compile by removing remaining omap specific gpio
calls. Based on earlier patches by Jarkko Nikula.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoUSB: OTG: twl4030 build fix
Kevin Hilman [Tue, 16 Dec 2008 00:00:03 +0000 (16:00 -0800)]
USB: OTG: twl4030 build fix

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agohsmmc: Leave out twl4030 dependency
Tony Lindgren [Tue, 30 Dec 2008 08:39:49 +0000 (10:39 +0200)]
hsmmc: Leave out twl4030 dependency

Also change the dependency to ARCH_OMAPP2430 || ARCH_OMAP3.
Based on comments by David Brownell.

Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agohsmmc: Fix bus voltage reset, clean-up for checkpatch
Tony Lindgren [Mon, 29 Dec 2008 16:15:47 +0000 (18:15 +0200)]
hsmmc: Fix bus voltage reset, clean-up for checkpatch

The bus voltage was being reset to 3V even if card was not
removed. Move the reset code to happen after slot has been
powered down. Also clean-up for checkpatch.

Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agohsmmc: Fix setting the voltage back to 3V
Tony Lindgren [Mon, 29 Dec 2008 14:24:25 +0000 (16:24 +0200)]
hsmmc: Fix setting the voltage back to 3V

We should not set it in mmc_omap_detect, as that does not necessarily
tell that card got removed. Reset the voltage back to 3V after powering
off the slot instead.

Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoMerge current mainline tree into linux-omap tree
Tony Lindgren [Mon, 29 Dec 2008 08:51:06 +0000 (10:51 +0200)]
Merge current mainline tree into linux-omap tree

Merge branches 'master' and 'linus'

15 years agoLinux 2.6.28 v2.6.28
Linus Torvalds [Wed, 24 Dec 2008 23:26:37 +0000 (15:26 -0800)]
Linux 2.6.28

Happy holidays..

15 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Wed, 24 Dec 2008 18:24:52 +0000 (10:24 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB (9920): em28xx: fix NULL pointer dereference in call to VIDIOC_INT_RESET command
  V4L/DVB (9908a): MAINTAINERS: mark linux-uvc-devel as subscribers only
  V4L/DVB (9906): v4l2-compat: test for unlocked_ioctl as well.
  V4L/DVB (9885): drivers/media Kconfig's: fix bugzilla #12204
  V4L/DVB (9875): gspca - main: Fix vidioc_s_jpegcomp locking.
  V4L/DVB (9781): [PATCH] Cablestar 2 I2C retries (fix CableStar2 support)
  V4L/DVB (9780): dib0700: Stop repeating after user stops pushing button

15 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 24 Dec 2008 18:24:14 +0000 (10:24 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: disable X86_PTRACE_BTS

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Wed, 24 Dec 2008 18:23:21 +0000 (10:23 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Add missing terminators in patch_sigmatel.c

15 years agoALSA: hda - Add missing terminators in patch_sigmatel.c
Herton Ronaldo Krzesinski [Tue, 23 Dec 2008 18:53:00 +0000 (16:53 -0200)]
ALSA: hda - Add missing terminators in patch_sigmatel.c

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 years agox86: disable X86_PTRACE_BTS
Ingo Molnar [Wed, 24 Dec 2008 09:49:51 +0000 (10:49 +0100)]
x86: disable X86_PTRACE_BTS

there's a new ptrace arch level feature in .28:

  config X86_PTRACE_BTS
  bool "Branch Trace Store"

it has broken fork() handling: the old DS area gets copied over into
a new task without clearing it.

Fixes exist but they came too late:

  c5dee61: x86, bts: memory accounting
  bf53de9: x86, bts: add fork and exit handling

and are queued up for v2.6.29. This shows that the facility is still not
tested well enough to release into a stable kernel - disable it for now and
reactivate in .29. In .29 the hardware-branch-tracer will use the DS/BTS
facilities too - hopefully resulting in better code.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoparisc: disable UP-optimized flush_tlb_mm
Kyle McMartin [Tue, 23 Dec 2008 13:44:30 +0000 (08:44 -0500)]
parisc: disable UP-optimized flush_tlb_mm

flush_tlb_mm's "optimized" uniprocessor case of allocating a new
context for userspace is exposing a race where we can suddely return
to a syscall with the protection id and space id out of sync, trapping
on the next userspace access.

Debugged-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Wed, 24 Dec 2008 01:01:40 +0000 (17:01 -0800)]
Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon: fix correctness of irq_enabled check for radeon.

15 years agoedac: fix edac core deadlock when removing a device
Harry Ciao [Tue, 23 Dec 2008 21:57:16 +0000 (13:57 -0800)]
edac: fix edac core deadlock when removing a device

When deleting an edac device, we have to wait for its edac_dev.work to be
completed before deleting the whole edac_dev structure.  Since we have no
idea which work in current edac_poller's workqueue is the work we are
conerned about, we wait for all work in the edac_poller's workqueue to be
proceseed.  This is done via flush_cpu_workqueue() which inserts a
wq_barrier into the tail of the workqueue and then sleeping on the
completion of this wq_barrier.  The edac_poller will wake up sleepers when
it is found.

EDAC core creates only one kernel worker thread, edac_poller, to run the
works of all current edac devices.  They share the same callback function
of edac_device_workq_function(), which would grab the mutex of
device_ctls_mutex first before it checks the device.  This is exactly
where edac_poller and rmmod would have a great chance to deadlock.

In below call trace of rmmod > ... >
edac_device_del_device >
edac_device_workq_teardown > flush_workqueue > flush_cpu_workqueue,

device_ctls_mutex would have already been grabbed by
edac_device_del_device().  So, on one hand rmmod would sleep on the
completion of a wq_barrier, holding device_ctls_mutex; on the other hand
edac_poller would be blocked on the same mutex when it's running any one
of works of existing edac evices(Note, this edac_dev.work is likely to be
totally irrelevant to the one that is being removed right now)and never
would have a chance to run the work of above wq_barrier to wake rmmod up.

edac_device_workq_teardown() should not be called within the critical
region of device_ctls_mutex.  Just like is done in edac_pci_del_device()
and edac_mc_del_mc(), where edac_pci_workq_teardown() and
edac_mc_workq_teardown() are called after related mutex are released.

Moreover, an edac_dev.work should check first if it is being removed.  If
this is the case, then it should bail out immediately.  Since not all of
existing edac devices are to be removed, this "shutting flag" should be
contained to edac device being removed.  The current edac_dev.op_state can
be used to serve this purpose.

The original deadlock problem and the solution have been witnessed and
tested on actual hardware.  Without the solution, rmmod an edac driver
would result in below deadlock:

root@localhost:/root> rmmod mv64x60_edac
EDAC DEBUG: mv64x60_dma_err_remove()
EDAC DEBUG: edac_device_del_device()
EDAC DEBUG: find_edac_device_by_dev()

(hang for a moment)

INFO: task edac-poller:2030 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
edac-poller   D 00000000     0  2030      2
Call Trace:
[df159dc0] [c0071e3c] free_hot_cold_page+0x17c/0x304 (unreliable)
[df159e80] [c000a024] __switch_to+0x6c/0xa0
[df159ea0] [c03587d8] schedule+0x2f4/0x4d8
[df159f00] [c03598a8] __mutex_lock_slowpath+0xa0/0x174
[df159f40] [e1030434] edac_device_workq_function+0x28/0xd8 [edac_core]
[df159f60] [c003beb4] run_workqueue+0x114/0x218
[df159f90] [c003c674] worker_thread+0x5c/0xc8
[df159fd0] [c004106c] kthread+0x5c/0xa0
[df159ff0] [c0013538] original_kernel_thread+0x44/0x60
INFO: task rmmod:2062 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
rmmod         D 0ff2c9fc     0  2062   1839
Call Trace:
[df119c00] [c0437a74] 0xc0437a74 (unreliable)
[df119cc0] [c000a024] __switch_to+0x6c/0xa0
[df119ce0] [c03587d8] schedule+0x2f4/0x4d8
[df119d40] [c03591dc] schedule_timeout+0xb0/0xf4

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agocgroups: avoid accessing uninitialized data in failure path
Li Zefan [Tue, 23 Dec 2008 21:57:14 +0000 (13:57 -0800)]
cgroups: avoid accessing uninitialized data in failure path

If cgroup_get_rootdir() failed, free_cg_links() will be called in the
failure path, but tmp_cg_links hasn't been initialized at that time.

I introduced this bug in the 2.6.27 merge window.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agocgroups: suppress bogus warning messages
Sharyathi Nagesh [Tue, 23 Dec 2008 21:57:12 +0000 (13:57 -0800)]
cgroups: suppress bogus warning messages

Remove spurious warning messages that are thrown onto the console during
cgroup operations.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Sharyathi Nagesh <sharyathi@in.ibm.com>
Acked-by: Serge E. Hallyn <serge@hallyn.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agow1: fix slave selection on big-endian systems
Evgeniy Polyakov [Tue, 23 Dec 2008 21:57:12 +0000 (13:57 -0800)]
w1: fix slave selection on big-endian systems

During test of the w1-gpio driver i found that in "w1.c:679
w1_slave_found()" the device id is converted to little-endian with
"cpu_to_le64()", but its not converted back to cpu format in "w1_io.c:293
w1_reset_select_slave()".

Based on a patch created by Andreas Hummel.

[akpm@linux-foundation.org: remove unneeded cast]
Reported-by: Andreas Hummel <andi_hummel@gmx.de>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agortc: rtc-isl1208: reject invalid dates
Chris Elston [Tue, 23 Dec 2008 21:57:10 +0000 (13:57 -0800)]
rtc: rtc-isl1208: reject invalid dates

This patch for the rtc-isl1208 driver makes it reject invalid dates.

Signed-off-by: Chris Elston <celston@katalix.com>
[a.zummo@towertech.it: added comment explaining the check]
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Hebert Valerio Riedel <hvr@gnu.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoOMAP2: fix recent build breakage
Paul Walmsley [Tue, 23 Dec 2008 06:28:10 +0000 (23:28 -0700)]
OMAP2: fix recent build breakage

Fix recent build breakage.  Boot-tested on N800.

  CC      arch/arm/mach-omap2/devices.o
arch/arm/mach-omap2/devices.c:110: error: 'OMAP34XX_MAILBOX_BASE' undeclared here (not in a function)
arch/arm/mach-omap2/devices.c:115: error: 'INT_34XX_MAIL_U0_MPU' undeclared here (not in a function)
make[1]: *** [arch/arm/mach-omap2/devices.o] Error 1

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agohsmmc: Fix comments from Pierre
Tony Lindgren [Tue, 23 Dec 2008 12:25:02 +0000 (14:25 +0200)]
hsmmc: Fix comments from Pierre

Also remove "change vdd back to 3V" in omap_mmc_remove() as it
seems unnecessary. If it's a hw workaround, we can add it back
as needed.

Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoV4L/DVB (9920): em28xx: fix NULL pointer dereference in call to VIDIOC_INT_RESET...
Devin Heitmueller [Wed, 17 Dec 2008 02:09:35 +0000 (23:09 -0300)]
V4L/DVB (9920): em28xx: fix NULL pointer dereference in call to VIDIOC_INT_RESET command

Fix a NULL pointer dereference that would occur if the video decoder tied to
the em28xx supports the VIDIOC_INT_RESET call (for example: the cx25840 driver)

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agodrm/radeon: fix correctness of irq_enabled check for radeon.
Dave Airlie [Mon, 22 Dec 2008 07:11:02 +0000 (17:11 +1000)]
drm/radeon: fix correctness of irq_enabled check for radeon.

This check was introduced with the logic the wrong way around.

Fixes regression: http://bugzilla.kernel.org/show_bug.cgi?id=12216

Tested-by: François Valenduc <francois.valenduc@tvcablenet.be>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Mon, 22 Dec 2008 22:52:00 +0000 (14:52 -0800)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: don't cond_resched() when irqs_disabled()
  ACPI: fix 2.6.28 acpi.debug_level regression

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Mon, 22 Dec 2008 22:40:48 +0000 (14:40 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  drivers/ide/{cs5530.c,sc1200.c}: Move a dereference below a NULL test

15 years agodrivers/ide/{cs5530.c,sc1200.c}: Move a dereference below a NULL test
Julia Lawall [Mon, 22 Dec 2008 22:05:06 +0000 (23:05 +0100)]
drivers/ide/{cs5530.c,sc1200.c}: Move a dereference below a NULL test

In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
15 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Mon, 22 Dec 2008 18:17:19 +0000 (10:17 -0800)]
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: MIPS64R2: Fix buggy __arch_swab64
  MIPS: Fix preprocessor warnings flaged by GCC 4.4

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 22 Dec 2008 18:12:54 +0000 (10:12 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  ppp: fix segfaults introduced by netdev_priv changes
  net: Fix module refcount leak in kernel_accept()

15 years agoMerge branch 'for-tony-mailbox'
Tony Lindgren [Mon, 22 Dec 2008 15:27:47 +0000 (17:27 +0200)]
Merge branch 'for-tony-mailbox'

Conflicts:

arch/arm/plat-omap/Kconfig
arch/arm/plat-omap/include/mach/omap34xx.h
arch/arm/plat-omap/mailbox.c

15 years agoReset mailbox to mainline version
Tony Lindgren [Mon, 22 Dec 2008 15:09:49 +0000 (17:09 +0200)]
Reset mailbox to mainline version

This is to start using Hiroshi's branch against the mainline tree.

Signed-off-by: Tony Lindgren <tony@atomide.com>
15 years agoMIPS: MIPS64R2: Fix buggy __arch_swab64
David Daney [Wed, 17 Dec 2008 21:28:39 +0000 (13:28 -0800)]
MIPS: MIPS64R2: Fix buggy __arch_swab64

The way the code is written it was assuming dshd has the function of a
hypothetical dshw instruction ...

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years agoMIPS: Fix preprocessor warnings flaged by GCC 4.4
David Daney [Thu, 18 Dec 2008 02:19:18 +0000 (18:19 -0800)]
MIPS: Fix preprocessor warnings flaged by GCC 4.4

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 years agoNull pointer deref with hrtimer_try_to_cancel()
Thomas Gleixner [Sat, 20 Dec 2008 20:27:34 +0000 (21:27 +0100)]
Null pointer deref with hrtimer_try_to_cancel()

Impact: Prevent kernel crash with posix timer clockid CLOCK_MONOTONIC_RAW

commit 2d42244ae71d6c7b0884b5664cf2eda30fb2ae68 (clocksource:
introduce CLOCK_MONOTONIC_RAW) introduced a new clockid, which is only
available to read out the raw not NTP adjusted system time.

The above commit did not prevent that a posix timer can be created
with that clockid. The timer_create() syscall succeeds and initializes
the timer to a non existing hrtimer base. When the timer is deleted
either by timer_delete() or by the exit() cleanup the kernel crashes.

Prevent the creation of timers for CLOCK_MONOTONIC_RAW by setting the
posix clock function to no_timer_create which returns an error code.

Reported-and-tested-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh...
Linus Torvalds [Sat, 20 Dec 2008 19:07:31 +0000 (11:07 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: change simple_strtol to simple_strtoul
  9p: convert d_iname references to d_name.name
  9p: Remove potentially bad parameter from function entry debug print.

15 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 20 Dec 2008 19:07:18 +0000 (11:07 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix resume (S2R) broken by Intel microcode module, on A110L
  x86 gart: don't complain if no AMD GART found
  AMD IOMMU: panic if completion wait loop fails
  AMD IOMMU: set cmd buffer pointers to zero manually
  x86: re-enable MCE on secondary CPUS after suspend/resume
  AMD IOMMU: allocate rlookup_table with __GFP_ZERO

15 years agox86: fix resume (S2R) broken by Intel microcode module, on A110L
Dmitry Adamushko [Fri, 19 Dec 2008 23:15:24 +0000 (00:15 +0100)]
x86: fix resume (S2R) broken by Intel microcode module, on A110L

Impact: fix deadlock

This is in response to the following bug report:

Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=12100
Subject         : resume (S2R) broken by Intel microcode module, on A110L
Submitter       : Andreas Mohr <andi@lisas.de>
Date            : 2008-11-25 08:48 (19 days old)
Handled-By      : Dmitry Adamushko <dmitry.adamushko@gmail.com>

[ The deadlock scenario has been discovered by Andreas Mohr ]

I think I might have a logical explanation why the system:

  (http://bugzilla.kernel.org/show_bug.cgi?id=12100)

might hang upon resuming, OTOH it should have likely hanged each and every time.

(1) possible deadlock in microcode_resume_cpu() if either 'if' section is
taken;

(2) now, I don't see it in spec. and can't experimentally verify it (newer
ucodes don't seem to be available for my Core2duo)... but logically-wise, I'd
think that when read upon resuming, the 'microcode revision' (MSR 0x8B) should
be back to its original one (we need to reload ucode anyway so it doesn't seem
logical if a cpu doesn't drop the version)... if so, the comparison with
memcmp() for the full 'struct cpu_signature' is wrong... and that's how one of
the aforementioned 'if' sections might have been triggered - leading to a
deadlock.

Obviously, in my tests I simulated loading/resuming with the ucode of the same
version (just to see that the file is loaded/re-loaded upon resuming) so this
issue has never popped up.

I'd appreciate if someone with an appropriate system might give a try to the
2nd patch (titled "fix a comparison && deadlock...").

In any case, the deadlock situation is a must-have fix.

Reported-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Tested-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agofs/9p: change simple_strtol to simple_strtoul
Julia Lawall [Fri, 19 Dec 2008 22:50:22 +0000 (16:50 -0600)]
fs/9p: change simple_strtol to simple_strtoul

Since v9ses->uid is unsigned, it would seem better to use simple_strtoul that
simple_strtol.

A simplified version of the semantic patch that makes this change is as
follows: (http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r2@
long e;
position p;
@@

e = simple_strtol@p(...)

@@
position p != r2.p;
type T;
T e;
@@

e =
- simple_strtol@p
+ simple_strtoul
  (...)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>
15 years ago9p: convert d_iname references to d_name.name
Wu Fengguang [Fri, 19 Dec 2008 22:47:40 +0000 (16:47 -0600)]
9p: convert d_iname references to d_name.name

d_iname is rubbish for long file names.
Use d_name.name in printks instead.

Signed-off-by: Wu Fengguang <wfg@linux.intel.com>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>
15 years ago9p: Remove potentially bad parameter from function entry debug print.
Duane Griffin [Fri, 19 Dec 2008 22:45:21 +0000 (16:45 -0600)]
9p: Remove potentially bad parameter from function entry debug print.

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Fri, 19 Dec 2008 19:37:23 +0000 (11:37 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] mpt fusion: clear list of outstanding commands on host reset
  [SCSI] scsi_lib: only call scsi_unprep_request() under queue lock
  [SCSI] ibmvstgt: move crq_queue_create to the end of initialization
  [SCSI] libiscsi REGRESSION: fix passthrough support with older iscsi tools
  [SCSI] aacraid: disable Dell Percraid quirk on Adaptec 2200S and 2120S

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Fri, 19 Dec 2008 19:37:07 +0000 (11:37 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: Fix a Oops bug in omap soc driver.
  ALSA: hda - Remove non-working headphone control for Dell laptops
  ALSA: hda - Add no-jd model for IDT 92HD73xx
  ALSA: Revert "ALSA: hda: removed unneeded hp_nid references"
  ALSA: hda - Add quirk for Dell Studio 17
  ALSA: hda - Fix silent HP output on D975

15 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Fri, 19 Dec 2008 19:36:49 +0000 (11:36 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cciss: fix problem that deleting multiple logical drives could cause a panic

15 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Fri, 19 Dec 2008 19:36:04 +0000 (11:36 -0800)]
Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: GEM on PAE has problems - disable it for now.
  drm/i915: Don't return busy for buffers left on the flushing list.

15 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Fri, 19 Dec 2008 19:34:36 +0000 (11:34 -0800)]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  md: Don't read past end of bitmap when reading bitmap.

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes...
Linus Torvalds [Fri, 19 Dec 2008 19:33:10 +0000 (11:33 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI hotplug: ibmphp: Fix module ref count underflow
  PCI hotplug: acpiphp wants a 64-bit _SUN
  PCI: pciehp: fix unexpected power off with pciehp_force
  PCI: fix aer resume sanity check

15 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Fri, 19 Dec 2008 14:37:12 +0000 (15:37 +0100)]
Merge branch 'fix/asoc' into for-linus

15 years agoALSA: Fix a Oops bug in omap soc driver.
Stanley Miao [Fri, 19 Dec 2008 14:08:22 +0000 (22:08 +0800)]
ALSA: Fix a Oops bug in omap soc driver.

There will be a Oops or frequent underrun messages when playing music with
omap soc driver, this is because a data region is incorretly sized, other data
region will be overwriten when writing to this data region.

Signed-off-by: Stanley Miao <stanley.miao@windriver.com>
Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 years agoALSA: hda - Remove non-working headphone control for Dell laptops
Takashi Iwai [Fri, 19 Dec 2008 13:02:32 +0000 (14:02 +0100)]
ALSA: hda - Remove non-working headphone control for Dell laptops

The previous commit re-enabled hp_nid setup for IDT92HD73*, but
it's unneeded indeed for Dell laptops that have multiple headphones.
Setting the extra hp_nid results in a non-working "Headpohne" mixer
control.  Thus hp_nid should be 0 for these dell models.

Also, the automatic addition of hp_nid should check whether it's
a dual-HP model or not.  For dual-HPs, the pins are already checked
by the early workaround.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 years agoomap mailbox: remove unnecessary header file inclusion
Hiroshi DOYU [Mon, 24 Nov 2008 23:13:48 +0000 (01:13 +0200)]
omap mailbox: remove unnecessary header file inclusion

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
15 years agoomap mailbox: convert sequence bit checking to module paramter
Hiroshi DOYU [Mon, 24 Nov 2008 23:06:34 +0000 (01:06 +0200)]
omap mailbox: convert sequence bit checking to module paramter

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
15 years agoomap mailbox: move mailbox.h into mailbox.c
Hiroshi DOYU [Mon, 24 Nov 2008 22:50:39 +0000 (00:50 +0200)]
omap mailbox: move mailbox.h into mailbox.c

no need to keep mailbox.h separately.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
15 years agoomap mailbox: add save_/restore_ctx() for PM
Hiroshi DOYU [Mon, 24 Nov 2008 22:48:12 +0000 (00:48 +0200)]
omap mailbox: add save_/restore_ctx() for PM

To preserve the registers during off-mode

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
15 years agoomap mailbox: fix empty struct device for omap2
Hiroshi DOYU [Mon, 24 Nov 2008 21:16:57 +0000 (23:16 +0200)]
omap mailbox: fix empty struct device for omap2

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
15 years agoomap mailbox: fix empty struct device for omap1
Hiroshi DOYU [Mon, 24 Nov 2008 21:16:46 +0000 (23:16 +0200)]
omap mailbox: fix empty struct device for omap1

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
15 years agoomap mailbox: fix empty struct device for omap_mbox
Hiroshi DOYU [Mon, 24 Nov 2008 21:57:10 +0000 (23:57 +0200)]
omap mailbox: fix empty struct device for omap_mbox

Since "mbox->dev" doesn't exist and isn't created either at
registration, this patch will create "struct device", which belongs to
"omap-mailbox" class and set this pointer for the member of
"struct omap_mbox".

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
15 years agoomap mailbox: print hardware revision at startup
Hiroshi DOYU [Sat, 22 Nov 2008 00:28:37 +0000 (02:28 +0200)]
omap mailbox: print hardware revision at startup

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
15 years agoomap mailbox: add initial omap3 support
Hiroshi DOYU [Sat, 22 Nov 2008 00:28:36 +0000 (02:28 +0200)]
omap mailbox: add initial omap3 support

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
15 years agoomap mailbox: cleanup omap2 register definition with macro
Hiroshi DOYU [Sat, 22 Nov 2008 00:28:35 +0000 (02:28 +0200)]
omap mailbox: cleanup omap2 register definition with macro

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
15 years agoACPI: don't cond_resched() when irqs_disabled()
Wu Fengguang [Wed, 26 Nov 2008 06:35:22 +0000 (14:35 +0800)]
ACPI: don't cond_resched() when irqs_disabled()

The ACPI interpreter usually runs with irqs enabled.
However, during suspend/resume it runs with
irqs disabled to evaluate _GTS/_BFS, as well as
by irqrouter_resume() which evaluates _CRS, _PRS, _SRS.

http://bugzilla.kernel.org/show_bug.cgi?id=12252

Signed-off-by: Wu Fengguang <wfg@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoACPI: fix 2.6.28 acpi.debug_level regression
Bjorn Helgaas [Thu, 13 Nov 2008 23:30:13 +0000 (17:30 -0600)]
ACPI: fix 2.6.28 acpi.debug_level regression

acpi_early_init() was changed to over-write the cmdline param,
making it really inconvenient to set debug flags at boot-time.

Also,
This sets the default level to "info", which is what all the ACPI
drivers use.  So to enable messages from drivers, you only have to
supply the "layer" (a.k.a. "component").  For non-"info" ACPI core
and ACPI interpreter messages, you have to supply both level and
layer masks, as before.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
15 years agoMerge current mainline tree into linux-omap tree
Tony Lindgren [Fri, 19 Dec 2008 08:39:33 +0000 (10:39 +0200)]
Merge current mainline tree into linux-omap tree

Merge branches 'master' and 'linus'

15 years agoALSA: hda - Add no-jd model for IDT 92HD73xx
Takashi Iwai [Wed, 17 Dec 2008 13:51:01 +0000 (14:51 +0100)]
ALSA: hda - Add no-jd model for IDT 92HD73xx

Added the model without the jack-detection for some desktops that
have really no jack-detection.  The recent driver caused regressions
regarding the sound output on such machines.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 years agoALSA: Revert "ALSA: hda: removed unneeded hp_nid references"
Takashi Iwai [Fri, 19 Dec 2008 07:20:38 +0000 (08:20 +0100)]
ALSA: Revert "ALSA: hda: removed unneeded hp_nid references"

This reverts commit 07f455f779acfb3eba4921fd1399761559b10fa9.
    ALSA: hda: removed unneeded hp_nid references

    Removed unneeded hp_nid references for 92hd73xx codec family.

This caused the silent output on some Intel desktops due to missing
routing of widget 0x0a and 0x0d.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 years agocciss: fix problem that deleting multiple logical drives could cause a panic
Stephen M. Cameron [Thu, 18 Dec 2008 13:55:11 +0000 (14:55 +0100)]
cciss: fix problem that deleting multiple logical drives could cause a panic

Fix problem that deleting multiple logical drives could cause a panic.

It fixes a panic which can be easily reproduced in the following way: Just
create several "arrays," each with multiple logical drives via hpacucli,
then delete the first array, and it will blow up in deregister_disk(), in
the call to get_host() when it tries to dig the hba pointer out of a NULL
queue pointer.

The problem has been present since my code to make rebuild_lun_table
behave better went in.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agoALSA: hda - Add quirk for Dell Studio 17
Joerg Schirottke [Fri, 19 Dec 2008 07:13:49 +0000 (08:13 +0100)]
ALSA: hda - Add quirk for Dell Studio 17

Added the matching model=dell-m6 for Dell Studio 17 laptop.

Signed-off-by: Joerg Schirottke <master@kanotix.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 years agodrm/i915: GEM on PAE has problems - disable it for now.
Dave Airlie [Fri, 19 Dec 2008 05:38:34 +0000 (15:38 +1000)]
drm/i915: GEM on PAE has problems - disable it for now.

On PAE systems, GEM allocates pages using shmem, and passes these
pages to be bound into AGP, however the AGP interfaces + the x86
set_memory interfaces all take unsigned long not dma_addr_t.

The initial fix for this was a mess, so we need to do this correctly
for 2.6.29.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/i915: Don't return busy for buffers left on the flushing list.
Eric Anholt [Mon, 15 Dec 2008 03:05:04 +0000 (19:05 -0800)]
drm/i915: Don't return busy for buffers left on the flushing list.

These buffers don't have active rendering still occurring to them, they just
need either a flush to be emitted or a retire_requests to occur so that we
notice they're done.  Return unbusy so that one of the two occurs.  The two
expected consumers of this interface (OpenGL and libdrm_intel BO cache) both
want this behavior.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agomd: Don't read past end of bitmap when reading bitmap.
NeilBrown [Fri, 19 Dec 2008 05:25:01 +0000 (16:25 +1100)]
md: Don't read past end of bitmap when reading bitmap.

When we read the write-intent-bitmap off the device, we currently
read a whole number of pages.
When PAGE_SIZE is 4K, this works due to the alignment we enforce
on the superblock and bitmap.
When PAGE_SIZE is 64K, this case read past the end-of-device
which causes an error.

When we write the superblock, we ensure to clip the last page
to just be the required size.  Copy that code into the read path
to just read the required number of sectors.

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: stable@kernel.org
15 years agoppp: fix segfaults introduced by netdev_priv changes
James Chapman [Wed, 17 Dec 2008 12:02:16 +0000 (12:02 +0000)]
ppp: fix segfaults introduced by netdev_priv changes

This patch fixes a segfault in ppp_shutdown_interface() and
ppp_destroy_interface() when a PPP connection is closed. I bisected
the problem to the following commit:

  commit c8019bf3aff653cceb64f66489fc299ee5957b57
  Author: Wang Chen <wangchen@cn.fujitsu.com>
  Date:   Thu Nov 20 04:24:17 2008 -0800

    netdevice ppp: Convert directly reference of netdev->priv

    1. Use netdev_priv(dev) to replace dev->priv.
    2. Alloc netdev's private data by alloc_netdev().

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The original ppp_generic code treated the netdev and struct ppp as
independent data structures which were freed separately. In moving the
ppp struct into the netdev, it is now possible for the private data to
be freed before the call to ppp_shutdown_interface(), which is bad.

The kfree(ppp) in ppp_destroy_interface() is also wrong; presumably
ppp hasn't worked since the above commit.

The following patch fixes both problems.

Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet: Fix module refcount leak in kernel_accept()
Wei Yongjun [Fri, 19 Dec 2008 03:35:10 +0000 (19:35 -0800)]
net: Fix module refcount leak in kernel_accept()

The kernel_accept() does not hold the module refcount of newsock->ops->owner,
so we need __module_get(newsock->ops->owner) code after call kernel_accept()
by hand.
In sunrpc, the module refcount is missing to hold. So this cause kernel panic.

Used following script to reproduct:

while [ 1 ];
do
    mount -t nfs4 192.168.0.19:/ /mnt
    touch /mnt/file
    umount /mnt
    lsmod | grep ipv6
done

This patch fixed the problem by add __module_get(newsock->ops->owner) to
kernel_accept(). So we do not need to used __module_get(newsock->ops->owner)
in every place when used kernel_accept().

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoLinux 2.6.28-rc9 v2.6.28-rc9
Linus Torvalds [Fri, 19 Dec 2008 01:20:13 +0000 (17:20 -0800)]
Linux 2.6.28-rc9

15 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
Linus Torvalds [Thu, 18 Dec 2008 20:05:53 +0000 (12:05 -0800)]
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  async_xor: dma_map destination DMA_BIDIRECTIONAL
  dmaengine: protect 'id' from concurrent registrations
  ioat: wait for self-test completion

15 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen...
Linus Torvalds [Thu, 18 Dec 2008 20:01:02 +0000 (12:01 -0800)]
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: favr-32 build fix
  ATSTK1006: Fix boot from NAND flash
  avr32: remove .note.gnu.build-id section when making vmlinux.bin
  avr32: Enable pullup on USART TX lines

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Thu, 18 Dec 2008 20:00:46 +0000 (12:00 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  bnx2: Fix bug in bnx2_free_rx_mem().
  irda: Add irda_skb_cb qdisc related padding
  jme: Fixed a typo
  net: kernel BUG at drivers/net/phy/mdio_bus.c:165!
  drivers/net: starfire: Fix napi ->poll() weight handling
  tlan: Fix pci memory unmapping
  enc28j60: use netif_rx_ni() to deliver RX packets
  tlan: Fix small (< 64 bytes) datagram transmissions
  netfilter: ctnetlink: fix missing CTA_NAT_SEQ_UNSPEC

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Thu, 18 Dec 2008 20:00:01 +0000 (12:00 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: We need to implement arch_ptrace_stop().

15 years agoMaintainer email fixes for inotify
John McCutchan [Thu, 18 Dec 2008 01:43:02 +0000 (17:43 -0800)]
Maintainer email fixes for inotify

Update John McCutchan and Robert Love's email addresses for
maintenance of inotify

Signed-off-by: John McCutchan <john@johnmccutchan.com>
Acked-by: Robert Love <rlove@rlove.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoavr32: favr-32 build fix
Haavard Skinnemoen [Thu, 18 Dec 2008 15:20:47 +0000 (16:20 +0100)]
avr32: favr-32 build fix

The favr-32 board code still refers to the old asm/arch header files
which were moved to mach/ some time ago.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
15 years agoATSTK1006: Fix boot from NAND flash
Haavard Skinnemoen [Thu, 18 Dec 2008 15:13:24 +0000 (16:13 +0100)]
ATSTK1006: Fix boot from NAND flash

Enable JFFS2 write buffer support so that the kernel can access a root
filesystem in NAND flash.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
15 years agoMerge branch 'musb'
Tony Lindgren [Thu, 18 Dec 2008 12:37:02 +0000 (14:37 +0200)]
Merge branch 'musb'

15 years agoMerge branch 'iommu-fixes-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Thu, 18 Dec 2008 12:28:11 +0000 (13:28 +0100)]
Merge branch 'iommu-fixes-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into x86/urgent

15 years agox86 gart: don't complain if no AMD GART found
Bjorn Helgaas [Wed, 17 Dec 2008 19:52:34 +0000 (12:52 -0700)]
x86 gart: don't complain if no AMD GART found

Impact: remove annoying bootup printk

It's perfectly normal for no AMD GART to be present, e.g., if you have
Intel CPUs.  None of the other iommu_init() functions makes noise when
it finds nothing.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoALSA: hda - Fix silent HP output on D975
Takashi Iwai [Wed, 17 Dec 2008 12:48:29 +0000 (13:48 +0100)]
ALSA: hda - Fix silent HP output on D975

Some desktops seems to have no HP/mic jack detection on the front panel,
which results in the silent output in the recent driver, because the
driver mutes the output (to save power) when no plug is detected.

This patch adds a new model that disables the jack-detection.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 years agobnx2: Fix bug in bnx2_free_rx_mem().
Michael Chan [Thu, 18 Dec 2008 03:06:08 +0000 (19:06 -0800)]
bnx2: Fix bug in bnx2_free_rx_mem().

DMA memory for the jumbo rx page rings was freed incorrectly using the
wrong local variable as the array index.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoPCI hotplug: ibmphp: Fix module ref count underflow
Neil Horman [Thu, 18 Dec 2008 00:07:47 +0000 (16:07 -0800)]
PCI hotplug: ibmphp: Fix module ref count underflow

I happened to notice that the ibmphp hotplug driver does something
rather silly in its init routine.  It purposely calls module_put so as
to underflow its module ref count to avoid being removed from the
kernel.  This is bad practice, and wrong, since it provides a window for
subsequent module_gets to reset the refcount to zero, allowing an unload
to race in and cause all sorts of mysterious panics.  If the module is
unsafe to load, simply omitting the module_exit parameter is sufficient
to prevent the kernel from allowing the unload.

Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>