select ACPI_NUMA
select SWIOTLB
select PCI_MSI
+ select DMAR
help
This selects the system type of your hardware. A "generic" kernel
will run on any supported IA-64 system. However, if you configure
endmenu
-menu "Power management and ACPI"
+menu "Power management and ACPI options"
source "kernel/power/Kconfig"
source "drivers/Kconfig"
+source "arch/ia64/hp/sim/Kconfig"
+
config MSPEC
tristate "Memory special operations driver"
depends on IA64
source "fs/Kconfig"
+source "arch/ia64/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
source "arch/ia64/kvm/Kconfig"
source "lib/Kconfig"
config IOMMU_HELPER
def_bool (IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB || IA64_GENERIC || SWIOTLB)
-
-source "arch/ia64/hp/sim/Kconfig"
-
-source "arch/ia64/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
*/
#include <linux/device.h>
+#include <linux/swiotlb.h>
#include <asm/machvec.h>
/* swiotlb declarations & definitions: */
extern int swiotlb_late_init_with_default_size (size_t size);
-extern ia64_mv_dma_alloc_coherent swiotlb_alloc_coherent;
-extern ia64_mv_dma_free_coherent swiotlb_free_coherent;
-extern ia64_mv_dma_map_single_attrs swiotlb_map_single_attrs;
-extern ia64_mv_dma_unmap_single_attrs swiotlb_unmap_single_attrs;
-extern ia64_mv_dma_map_sg_attrs swiotlb_map_sg_attrs;
-extern ia64_mv_dma_unmap_sg_attrs swiotlb_unmap_sg_attrs;
-extern ia64_mv_dma_supported swiotlb_dma_supported;
-extern ia64_mv_dma_mapping_error swiotlb_dma_mapping_error;
/* hwiommu declarations & definitions: */
# endif /* __KERNEL__ */
-/*
- * Enabling BIO_VMERGE_BOUNDARY forces us to turn off I/O MMU bypassing. It is said that
- * BIO-level virtual merging can give up to 4% performance boost (not verified for ia64).
- * On the other hand, we know that I/O MMU bypassing gives ~8% performance improvement on
- * SPECweb-like workloads on zx1-based machines. Thus, for now we favor I/O MMU bypassing
- * over BIO-level virtual merging.
- */
-extern unsigned long ia64_max_iommu_merge_mask;
-#if 1
-#define BIO_VMERGE_BOUNDARY 0
-#else
-/*
- * It makes no sense at all to have this BIO_VMERGE_BOUNDARY macro here. Should be
- * replaced by dma_merge_mask() or something of that sort. Note: the only way
- * BIO_VMERGE_BOUNDARY is used is to mask off bits. Effectively, our definition gets
- * expanded into:
- *
- * addr & ((ia64_max_iommu_merge_mask + 1) - 1) == (addr & ia64_max_iommu_vmerge_mask)
- *
- * which is precisely what we want.
- */
-#define BIO_VMERGE_BOUNDARY (ia64_max_iommu_merge_mask + 1)
-#endif
-
#endif /* _ASM_IA64_IO_H */
#define _ASM_IA64_MACHVEC_H
#include <linux/types.h>
+#include <linux/swiotlb.h>
/* forward declarations: */
struct device;
# error Unknown configuration. Update arch/ia64/include/asm/machvec.h.
# endif /* CONFIG_IA64_GENERIC */
-/*
- * Declare default routines which aren't declared anywhere else:
- */
-extern ia64_mv_dma_init swiotlb_init;
-extern ia64_mv_dma_alloc_coherent swiotlb_alloc_coherent;
-extern ia64_mv_dma_free_coherent swiotlb_free_coherent;
-extern ia64_mv_dma_map_single swiotlb_map_single;
-extern ia64_mv_dma_map_single_attrs swiotlb_map_single_attrs;
-extern ia64_mv_dma_unmap_single swiotlb_unmap_single;
-extern ia64_mv_dma_unmap_single_attrs swiotlb_unmap_single_attrs;
-extern ia64_mv_dma_map_sg swiotlb_map_sg;
-extern ia64_mv_dma_map_sg_attrs swiotlb_map_sg_attrs;
-extern ia64_mv_dma_unmap_sg swiotlb_unmap_sg;
-extern ia64_mv_dma_unmap_sg_attrs swiotlb_unmap_sg_attrs;
-extern ia64_mv_dma_sync_single_for_cpu swiotlb_sync_single_for_cpu;
-extern ia64_mv_dma_sync_sg_for_cpu swiotlb_sync_sg_for_cpu;
-extern ia64_mv_dma_sync_single_for_device swiotlb_sync_single_for_device;
-extern ia64_mv_dma_sync_sg_for_device swiotlb_sync_sg_for_device;
-extern ia64_mv_dma_mapping_error swiotlb_dma_mapping_error;
-extern ia64_mv_dma_supported swiotlb_dma_supported;
-
/*
* Define default versions so we can extend machvec for new platforms without having
* to update the machvec files for all existing platforms.
*/
#define GRANULEROUNDDOWN(n) ((n) & ~(IA64_GRANULE_SIZE-1))
#define GRANULEROUNDUP(n) (((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1))
-#define ORDERROUNDDOWN(n) ((n) & ~((PAGE_SIZE<<MAX_ORDER)-1))
#ifdef CONFIG_NUMA
extern void call_pernode_memory (unsigned long start, unsigned long len, void *func);
#define sal_log_severity_fatal 1
#define sal_log_severity_corrected 2
+/*
+ * Error Recovery Info (ERI) bit decode. From SAL Spec section B.2.2 Table B-3
+ * Error Section Error_Recovery_Info Field Definition.
+ */
+#define ERI_NOT_VALID 0x0 /* Error Recovery Field is not valid */
+#define ERI_NOT_ACCESSIBLE 0x30 /* Resource not accessible */
+#define ERI_CONTAINMENT_WARN 0x22 /* Corrupt data propagated */
+#define ERI_UNCORRECTED_ERROR 0x20 /* Uncorrected error */
+#define ERI_COMPONENT_RESET 0x24 /* Component must be reset */
+#define ERI_CORR_ERROR_LOG 0x21 /* Corrected error, needs logging */
+#define ERI_CORR_ERROR_THRESH 0x29 /* Corrected error threshold exceeded */
+
/* Definition of log section header structures */
typedef struct sal_log_sec_header {
efi_guid_t guid; /* Unique Section ID */
sal_log_revision_t revision; /* Major and Minor revision of Section */
- u16 reserved;
+ u8 error_recovery_info; /* Platform error recovery status */
+ u8 reserved;
u32 len; /* Section length */
} sal_log_section_hdr_t;
#define SN_SAL_SET_CPU_NUMBER 0x02000068
#define SN_SAL_KERNEL_LAUNCH_EVENT 0x02000069
+#define SN_SAL_WATCHLIST_ALLOC 0x02000070
+#define SN_SAL_WATCHLIST_FREE 0x02000071
/*
* Service-specific constants
SAL_CALL_NOLOCK(rv, SN_SAL_KERNEL_LAUNCH_EVENT, 0, 0, 0, 0, 0, 0, 0);
return rv.status;
}
+
+union sn_watchlist_u {
+ u64 val;
+ struct {
+ u64 blade : 16,
+ size : 32,
+ filler : 16;
+ };
+};
+
+static inline int
+sn_mq_watchlist_alloc(int blade, void *mq, unsigned int mq_size,
+ unsigned long *intr_mmr_offset)
+{
+ struct ia64_sal_retval rv;
+ unsigned long addr;
+ union sn_watchlist_u size_blade;
+ int watchlist;
+
+ addr = (unsigned long)mq;
+ size_blade.size = mq_size;
+ size_blade.blade = blade;
+
+ /*
+ * bios returns watchlist number or negative error number.
+ */
+ ia64_sal_oemcall_nolock(&rv, SN_SAL_WATCHLIST_ALLOC, addr,
+ size_blade.val, (u64)intr_mmr_offset,
+ (u64)&watchlist, 0, 0, 0);
+ if (rv.status < 0)
+ return rv.status;
+
+ return watchlist;
+}
+
+static inline int
+sn_mq_watchlist_free(int blade, int watchlist_num)
+{
+ struct ia64_sal_retval rv;
+ ia64_sal_oemcall_nolock(&rv, SN_SAL_WATCHLIST_FREE, blade,
+ watchlist_num, 0, 0, 0, 0, 0);
+ return rv.status;
+}
#endif /* _ASM_IA64_SN_SN_SAL_H */
return 0;
}
+int __init early_acpi_boot_init(void)
+{
+ int ret;
+
+ /*
+ * do a partial walk of MADT to determine how many CPUs
+ * we have including offline CPUs
+ */
+ if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
+ printk(KERN_ERR PREFIX "Can't find MADT\n");
+ return 0;
+ }
+
+ ret = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC,
+ acpi_parse_lsapic, NR_CPUS);
+ if (ret < 1)
+ printk(KERN_ERR PREFIX
+ "Error parsing MADT - no LAPIC entries\n");
+
+ return 0;
+}
+
+
+
int __init acpi_boot_init(void)
{
printk(KERN_ERR PREFIX
"Error parsing LAPIC address override entry\n");
- if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC, acpi_parse_lsapic, NR_CPUS)
- < 1)
- printk(KERN_ERR PREFIX
- "Error parsing MADT - no LAPIC entries\n");
-
if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0)
< 0)
printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
#include <asm/machvec.h>
#include <linux/dma-mapping.h>
-#include <asm/machvec.h>
#include <asm/system.h>
#ifdef CONFIG_DMAR
#include <linux/kernel.h>
-#include <linux/string.h>
#include <asm/page.h>
#include <asm/iommu.h>
}
#endif
-#ifdef CONFIG_CRASH_KERNEL
+#ifdef CONFIG_CRASH_DUMP
if (reserve_elfcorehdr(&rsvd_region[n].start,
&rsvd_region[n].end) == 0)
n++;
#ifdef CONFIG_ACPI
/* Initialize the ACPI boot-time table parser */
acpi_table_init();
+ early_acpi_boot_init();
# ifdef CONFIG_ACPI_NUMA
acpi_numa_init();
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+ prefill_possible_map();
+#endif
per_cpu_scan_finalize((cpus_weight(early_cpu_possible_map) == 0 ?
32 : cpus_weight(early_cpu_possible_map)),
additional_cpus > 0 ? additional_cpus : 0);
setup_per_cpu_areas (void)
{
/* start_kernel() requires this... */
-#ifdef CONFIG_ACPI_HOTPLUG_CPU
- prefill_possible_map();
-#endif
}
/*
(min(end, __pa(MAX_DMA_ADDRESS)) - start) >>PAGE_SHIFT;
#endif
start = GRANULEROUNDDOWN(start);
- start = ORDERROUNDDOWN(start);
end = GRANULEROUNDUP(end);
mem_data[node].max_pfn = max(mem_data[node].max_pfn,
end >> PAGE_SHIFT);
#ifdef CONFIG_IA64_SGI_UV
int sn_prom_type;
+long sn_partition_id;
+EXPORT_SYMBOL(sn_partition_id);
+long sn_coherency_id;
+EXPORT_SYMBOL_GPL(sn_coherency_id);
+long sn_region_size;
+EXPORT_SYMBOL(sn_region_size);
#endif
struct redir_addr {
projects / linux-2.6-omap-h63xx.git / commitdiff