]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
[MIPS] Pb1200/DBAu1200: move platform code to its proper place
authorSergei Shtylyov <sshtylyov@ru.mvista.com>
Mon, 28 Apr 2008 15:54:38 +0000 (19:54 +0400)
committerRalf Baechle <ralf@linux-mips.org>
Mon, 28 Apr 2008 16:14:33 +0000 (17:14 +0100)
Since both the IDE interface and SMC 91C111 Ethernet chip are on-board
devices, not SOC devices, move the platform device registration form the
common to the board specific code.

While at it, remove semicolon (which didn't break compilation only by
chance) from the AU1XXX_ATA_DDMA_REQ macro and do some renaming:

- change 'au1200_ide0_' variable name prefix to the mere 'ide_';

- change 'smc91x_' variable name prefix to 'smc91c111_' since that's the
  name of the chip used on the boards;

- drop 'AU1XXX_' prefix from the names of macros describing IDE and Ethernet
  on-board devices;

- change 'SMC91111_' to 'SMC91C111_', change 'IRQ' to 'INT' in the names of
  the macros describing the Ethernet chip for consistency with the IDE
  macros;

- change 'ATA_' to 'IDE_' and 'OFFSET' to 'SHIFT' (since this value is
  indeed a shift count) in the names of the macros describing the IDE
  interface.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/au1000/common/platform.c
arch/mips/au1000/pb1200/Makefile
arch/mips/au1000/pb1200/platform.c [new file with mode: 0644]
drivers/ide/mips/au1xxx-ide.c
include/asm-mips/mach-db1x00/db1200.h
include/asm-mips/mach-pb1x00/pb1200.h

index 83ad422e8aca167cc6b6398883ab43e38ea25905..31d2a2270878832354a02e4cd7f6b4b6eaf03516 100644 (file)
@@ -233,19 +233,6 @@ static struct resource au1200_lcd_resources[] = {
        }
 };
 
-static struct resource au1200_ide0_resources[] = {
-       [0] = {
-               .start          = AU1XXX_ATA_PHYS_ADDR,
-               .end            = AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN - 1,
-               .flags          = IORESOURCE_MEM,
-       },
-       [1] = {
-               .start          = AU1XXX_ATA_INT,
-               .end            = AU1XXX_ATA_INT,
-               .flags          = IORESOURCE_IRQ,
-       }
-};
-
 static u64 au1200_lcd_dmamask = ~(u32)0;
 
 static struct platform_device au1200_lcd_device = {
@@ -259,20 +246,6 @@ static struct platform_device au1200_lcd_device = {
        .resource       = au1200_lcd_resources,
 };
 
-
-static u64 ide0_dmamask = ~(u32)0;
-
-static struct platform_device au1200_ide0_device = {
-       .name           = "au1200-ide",
-       .id             = 0,
-       .dev = {
-               .dma_mask               = &ide0_dmamask,
-               .coherent_dma_mask      = 0xffffffff,
-       },
-       .num_resources = ARRAY_SIZE(au1200_ide0_resources),
-       .resource       = au1200_ide0_resources,
-};
-
 static u64 au1xxx_mmc_dmamask =  ~(u32)0;
 
 static struct platform_device au1xxx_mmc_device = {
@@ -292,29 +265,6 @@ static struct platform_device au1x00_pcmcia_device = {
        .id             = 0,
 };
 
-#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
-static struct resource smc91x_resources[] = {
-       [0] = {
-               .name   = "smc91x-regs",
-               .start  = AU1XXX_SMC91111_PHYS_ADDR,
-               .end    = AU1XXX_SMC91111_PHYS_ADDR + 0xf,
-               .flags  = IORESOURCE_MEM,
-       },
-       [1] = {
-               .start  = AU1XXX_SMC91111_IRQ,
-               .end    = AU1XXX_SMC91111_IRQ,
-               .flags  = IORESOURCE_IRQ,
-       },
-};
-
-static struct platform_device smc91x_device = {
-       .name           = "smc91x",
-       .id             = -1,
-       .num_resources  = ARRAY_SIZE(smc91x_resources),
-       .resource       = smc91x_resources,
-};
-#endif /* defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200) */
-
 /* All Alchemy demoboards with I2C have this #define in their headers */
 #ifdef SMBUS_PSC_BASE
 static struct resource pbdb_smbus_resources[] = {
@@ -345,12 +295,8 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
        &au1xxx_usb_gdt_device,
        &au1xxx_usb_otg_device,
        &au1200_lcd_device,
-       &au1200_ide0_device,
        &au1xxx_mmc_device,
 #endif
-#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
-       &smc91x_device,
-#endif
 #ifdef SMBUS_PSC_BASE
        &pbdb_smbus_device,
 #endif
index 970b1b1d5cda63cf06702cbc1ed60ca4f8454ab2..4fe02ea65a60e13b20e5706532e95260492c044b 100644 (file)
@@ -3,5 +3,6 @@
 #
 
 lib-y := init.o board_setup.o irqmap.o
+obj-y += platform.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/au1000/pb1200/platform.c b/arch/mips/au1000/pb1200/platform.c
new file mode 100644 (file)
index 0000000..5930110
--- /dev/null
@@ -0,0 +1,84 @@
+/*
+ * Pb1200/DBAu1200 board platform device registration
+ *
+ * Copyright (C) 2008 MontaVista Software Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-au1x00/au1xxx.h>
+
+static struct resource ide_resources[] = {
+       [0] = {
+               .start  = IDE_PHYS_ADDR,
+               .end    = IDE_PHYS_ADDR + IDE_PHYS_LEN - 1,
+               .flags  = IORESOURCE_MEM
+       },
+       [1] = {
+               .start  = IDE_INT,
+               .end    = IDE_INT,
+               .flags  = IORESOURCE_IRQ
+       }
+};
+
+static u64 ide_dmamask = ~(u32)0;
+
+static struct platform_device ide_device = {
+       .name           = "au1200-ide",
+       .id             = 0,
+       .dev = {
+               .dma_mask               = &ide_dmamask,
+               .coherent_dma_mask      = 0xffffffff,
+       },
+       .num_resources  = ARRAY_SIZE(ide_resources),
+       .resource       = ide_resources
+};
+
+static struct resource smc91c111_resources[] = {
+       [0] = {
+               .name   = "smc91x-regs",
+               .start  = SMC91C111_PHYS_ADDR,
+               .end    = SMC91C111_PHYS_ADDR + 0xf,
+               .flags  = IORESOURCE_MEM
+       },
+       [1] = {
+               .start  = SMC91C111_INT,
+               .end    = SMC91C111_INT,
+               .flags  = IORESOURCE_IRQ
+       },
+};
+
+static struct platform_device smc91c111_device = {
+       .name           = "smc91x",
+       .id             = -1,
+       .num_resources  = ARRAY_SIZE(smc91c111_resources),
+       .resource       = smc91c111_resources
+};
+
+static struct platform_device *board_platform_devices[] __initdata = {
+       &ide_device,
+       &smc91c111_device
+};
+
+static int __init board_register_devices(void)
+{
+       return platform_add_devices(board_platform_devices,
+                                   ARRAY_SIZE(board_platform_devices));
+}
+
+arch_initcall(board_register_devices);
index 296b9c674baec645b51bbe68900f729ed64c0024..e0cf5e2dbab76accf3e5e392b9ab2b790e701131 100644 (file)
@@ -359,7 +359,7 @@ static void auide_ddma_rx_callback(int irq, void *param)
 static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags)
 {
        dev->dev_id          = dev_id;
-       dev->dev_physaddr    = (u32)AU1XXX_ATA_PHYS_ADDR;
+       dev->dev_physaddr    = (u32)IDE_PHYS_ADDR;
        dev->dev_intlevel    = 0;
        dev->dev_intpolarity = 0;
        dev->dev_tsize       = tsize;
@@ -397,7 +397,7 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
        dbdev_tab_t source_dev_tab, target_dev_tab;
        u32 dev_id, tsize, devwidth, flags;
 
-       dev_id   = AU1XXX_ATA_DDMA_REQ;
+       dev_id   = IDE_DDMA_REQ;
 
        tsize    =  8; /*  1 */
        devwidth = 32; /* 16 */
@@ -506,10 +506,10 @@ static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif)
 
        /* FIXME? */
        for (i = 0; i < 8; i++)
-               *ata_regs++ = ahwif->regbase + (i << AU1XXX_ATA_REG_OFFSET);
+               *ata_regs++ = ahwif->regbase + (i << IDE_REG_SHIFT);
 
        /* set the Alternative Status register */
-       *ata_regs = ahwif->regbase + (14 << AU1XXX_ATA_REG_OFFSET);
+       *ata_regs = ahwif->regbase + (14 << IDE_REG_SHIFT);
 }
 
 static const struct ide_port_ops au1xxx_port_ops = {
index d2e28e64932ed8141d8f4b29df85f8739fb963a2..eedd048a7261d958c3eda305267b2a5c0f74f37c 100644 (file)
@@ -169,15 +169,15 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
 #define BCSR_INT_SD0INSERT     0x1000
 #define BCSR_INT_SD0EJECT      0x2000
 
-#define AU1XXX_SMC91111_PHYS_ADDR      (0x19000300)
-#define AU1XXX_SMC91111_IRQ                    DB1200_ETH_INT
-
-#define AU1XXX_ATA_PHYS_ADDR           (0x18800000)
-#define AU1XXX_ATA_REG_OFFSET          (5)
-#define AU1XXX_ATA_PHYS_LEN            (16 << AU1XXX_ATA_REG_OFFSET)
-#define AU1XXX_ATA_INT                 DB1200_IDE_INT
-#define AU1XXX_ATA_DDMA_REQ            DSCR_CMD0_DMA_REQ1;
-#define AU1XXX_ATA_RQSIZE              128
+#define SMC91C111_PHYS_ADDR    0x19000300
+#define SMC91C111_INT          DB1200_ETH_INT
+
+#define IDE_PHYS_ADDR          0x18800000
+#define IDE_REG_SHIFT          5
+#define IDE_PHYS_LEN           (16 << IDE_REG_SHIFT)
+#define IDE_INT                DB1200_IDE_INT
+#define IDE_DDMA_REQ           DSCR_CMD0_DMA_REQ1
+#define IDE_RQSIZE             128
 
 #define NAND_PHYS_ADDR   0x20000000
 
index edaa489b58f179213bc93c428c75ce6d762f0ad2..e2c6bcac3b4279933ed4b1419f92f35f972f4ddb 100644 (file)
@@ -182,15 +182,15 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
 #define SET_VCC_VPP(VCC, VPP, SLOT)\
        ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
 
-#define AU1XXX_SMC91111_PHYS_ADDR      (0x0D000300)
-#define AU1XXX_SMC91111_IRQ                    PB1200_ETH_INT
-
-#define AU1XXX_ATA_PHYS_ADDR           (0x0C800000)
-#define AU1XXX_ATA_REG_OFFSET          (5)
-#define AU1XXX_ATA_PHYS_LEN            (16 << AU1XXX_ATA_REG_OFFSET)
-#define AU1XXX_ATA_INT                 PB1200_IDE_INT
-#define AU1XXX_ATA_DDMA_REQ            DSCR_CMD0_DMA_REQ1;
-#define AU1XXX_ATA_RQSIZE              128
+#define SMC91C111_PHYS_ADDR    0x0D000300
+#define SMC91C111_INT          PB1200_ETH_INT
+
+#define IDE_PHYS_ADDR          0x0C800000
+#define IDE_REG_SHIFT          5
+#define IDE_PHYS_LEN           (16 << IDE_REG_SHIFT)
+#define IDE_INT                PB1200_IDE_INT
+#define IDE_DDMA_REQ           DSCR_CMD0_DMA_REQ1
+#define IDE_RQSIZE             128
 
 #define NAND_PHYS_ADDR   0x1C000000