]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] bnx2: refine bnx2_poll
authorMichael Chan <mchan@broadcom.com>
Fri, 4 Nov 2005 16:53:48 +0000 (08:53 -0800)
committerJohn W. Linville <linville@tuxdriver.com>
Sun, 6 Nov 2005 02:00:03 +0000 (21:00 -0500)
Refine bnx2_poll() logic to write back the most up-to-date status tag
when all work has been processed. This eliminates some occasional
extra interrupts when a older status tag is written even though all
work has been processed.

The idea is to read the status tag just before exiting bnx2_poll() and
then check again for any new work. If no new work is pending, the
status tag written back will not generate any extra interrupt. This
logic is similar to the changes David Miller did to tg3_poll().

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/bnx2.c
drivers/net/bnx2.h

index affb67372e02f03e690e54469da7cc5f0303421e..aa6d30e0d829a95f230f935612c0d586ba1118a3 100644 (file)
@@ -1533,10 +1533,11 @@ bnx2_phy_int(struct bnx2 *bp)
 static void
 bnx2_tx_int(struct bnx2 *bp)
 {
+       struct status_block *sblk = bp->status_blk;
        u16 hw_cons, sw_cons, sw_ring_cons;
        int tx_free_bd = 0;
 
-       hw_cons = bp->status_blk->status_tx_quick_consumer_index0;
+       hw_cons = bp->hw_tx_cons = sblk->status_tx_quick_consumer_index0;
        if ((hw_cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT) {
                hw_cons++;
        }
@@ -1591,7 +1592,9 @@ bnx2_tx_int(struct bnx2 *bp)
 
                dev_kfree_skb_irq(skb);
 
-               hw_cons = bp->status_blk->status_tx_quick_consumer_index0;
+               hw_cons = bp->hw_tx_cons =
+                       sblk->status_tx_quick_consumer_index0;
+
                if ((hw_cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT) {
                        hw_cons++;
                }
@@ -1636,11 +1639,12 @@ bnx2_reuse_rx_skb(struct bnx2 *bp, struct sk_buff *skb,
 static int
 bnx2_rx_int(struct bnx2 *bp, int budget)
 {
+       struct status_block *sblk = bp->status_blk;
        u16 hw_cons, sw_cons, sw_ring_cons, sw_prod, sw_ring_prod;
        struct l2_fhdr *rx_hdr;
        int rx_pkt = 0;
 
-       hw_cons = bp->status_blk->status_rx_quick_consumer_index0;
+       hw_cons = bp->hw_rx_cons = sblk->status_rx_quick_consumer_index0;
        if ((hw_cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT) {
                hw_cons++;
        }
@@ -1760,6 +1764,15 @@ next_rx:
 
                if ((rx_pkt == budget))
                        break;
+
+               /* Refresh hw_cons to see if there is new work */
+               if (sw_cons == hw_cons) {
+                       hw_cons = bp->hw_rx_cons =
+                               sblk->status_rx_quick_consumer_index0;
+                       if ((hw_cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT)
+                               hw_cons++;
+                       rmb();
+               }
        }
        bp->rx_cons = sw_cons;
        bp->rx_prod = sw_prod;
@@ -1827,15 +1840,27 @@ bnx2_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
        return IRQ_HANDLED;
 }
 
+static inline int
+bnx2_has_work(struct bnx2 *bp)
+{
+       struct status_block *sblk = bp->status_blk;
+
+       if ((sblk->status_rx_quick_consumer_index0 != bp->hw_rx_cons) ||
+           (sblk->status_tx_quick_consumer_index0 != bp->hw_tx_cons))
+               return 1;
+
+       if (((sblk->status_attn_bits & STATUS_ATTN_BITS_LINK_STATE) != 0) !=
+           bp->link_up)
+               return 1;
+
+       return 0;
+}
+
 static int
 bnx2_poll(struct net_device *dev, int *budget)
 {
        struct bnx2 *bp = dev->priv;
-       int rx_done = 1;
-
-       bp->last_status_idx = bp->status_blk->status_idx;
 
-       rmb();
        if ((bp->status_blk->status_attn_bits &
                STATUS_ATTN_BITS_LINK_STATE) !=
                (bp->status_blk->status_attn_bits_ack &
@@ -1846,11 +1871,10 @@ bnx2_poll(struct net_device *dev, int *budget)
                spin_unlock(&bp->phy_lock);
        }
 
-       if (bp->status_blk->status_tx_quick_consumer_index0 != bp->tx_cons) {
+       if (bp->status_blk->status_tx_quick_consumer_index0 != bp->hw_tx_cons)
                bnx2_tx_int(bp);
-       }
 
-       if (bp->status_blk->status_rx_quick_consumer_index0 != bp->rx_cons) {
+       if (bp->status_blk->status_rx_quick_consumer_index0 != bp->hw_rx_cons) {
                int orig_budget = *budget;
                int work_done;
 
@@ -1860,13 +1884,12 @@ bnx2_poll(struct net_device *dev, int *budget)
                work_done = bnx2_rx_int(bp, orig_budget);
                *budget -= work_done;
                dev->quota -= work_done;
-               
-               if (work_done >= orig_budget) {
-                       rx_done = 0;
-               }
        }
        
-       if (rx_done) {
+       bp->last_status_idx = bp->status_blk->status_idx;
+       rmb();
+
+       if (!bnx2_has_work(bp)) {
                netif_rx_complete(dev);
                REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
                        BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID |
@@ -3222,6 +3245,7 @@ bnx2_init_tx_ring(struct bnx2 *bp)
 
        bp->tx_prod = 0;
        bp->tx_cons = 0;
+       bp->hw_tx_cons = 0;
        bp->tx_prod_bseq = 0;
        
        val = BNX2_L2CTX_TYPE_TYPE_L2;
@@ -3254,6 +3278,7 @@ bnx2_init_rx_ring(struct bnx2 *bp)
 
        ring_prod = prod = bp->rx_prod = 0;
        bp->rx_cons = 0;
+       bp->hw_rx_cons = 0;
        bp->rx_prod_bseq = 0;
                
        rxbd = &bp->rx_desc_ring[0];
index 012586e4ba0b5b31160ea33ccb415c5ac636f834..76bb5f1a250bd52f43567e54bcf6f71efc720344 100644 (file)
@@ -3914,6 +3914,9 @@ struct bnx2 {
        u16                     tx_cons;
        int                     tx_ring_size;
 
+       u16                     hw_tx_cons;
+       u16                     hw_rx_cons;
+
 #ifdef BCM_VLAN 
        struct                  vlan_group *vlgrp;
 #endif