static struct input_dev *button_dev;
-static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
+static irqreturn_t button_interrupt(int irq, void *dummy)
{
input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
input_sync(button_dev);
+ return IRQ_HANDLED;
}
static int __init button_init(void)
# task_pt_regs() in asm/processor.h or asm/ptrace.h
# arch_has_single_step() if there is hardware single-step support
# arch_has_block_step() if there is hardware block-step support
-# arch_ptrace() and not #define __ARCH_SYS_PTRACE
-# compat_arch_ptrace() and #define __ARCH_WANT_COMPAT_SYS_PTRACE
# asm/syscall.h supplying asm-generic/syscall.h interface
# linux/regset.h user_regset interfaces
# CORE_DUMP_USE_REGSET #define'd in linux/elf.h
return PCI_SLOT(dev->devfn);
}
-void __devinit
+void
pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
struct resource *res)
{
/*
* Where secondaries begin a life of C.
*/
-void __init
+void __cpuinit
smp_callin(void)
{
int cpuid = hard_smp_processor_id();
* Send a message to a secondary's console. "START" is one such
* interesting message. ;-)
*/
-static void __init
+static void __cpuinit
send_secondary_console_msg(char *str, int cpuid)
{
struct percpu_struct *cpu;
/*
* Convince the console to have a secondary cpu begin execution.
*/
-static int __init
+static int __cpuinit
secondary_cpu_start(int cpuid, struct task_struct *idle)
{
struct percpu_struct *cpu;
static int opDEC_fix;
-static void __init
+static void __cpuinit
opDEC_check(void)
{
__asm__ __volatile__ (
return;
}
-void __init
+void __cpuinit
trap_init(void)
{
/* Tell PAL-code what global pointer we want in the kernel. */
#define arch_has_block_step() (1)
extern void user_enable_block_step(struct task_struct *);
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#endif /* !__KERNEL__ */
/* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */
* sn_pci_controller_fixup() - This routine sets up a bus's resources
* consistent with the Linux PCI abstraction layer.
*/
-static void
+static void __init
sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
{
s64 status = 0;
/*
* References to members of the boot_cpu_data structure.
*/
- .text
+.section .text.head, "ax"
.global start_kernel
.global __bss_start
.global _end
/*
* AP startup routine
*/
- .text
.global eit_vector
ENTRY(startup_AP)
;; setup EVB
nop
#endif /* CONFIG_SMP */
+ .text
ENTRY(stack_start)
.long init_thread_union+8192
.long __KERNEL_DS
_text = .; /* Text and read-only data */
.boot : { *(.boot) } = 0
.text : {
+ *(.text.head)
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
#include <asm/break.h>
-#define BUG() \
-do { \
- __asm__ __volatile__("break %0" : : "i" (BRK_BUG)); \
-} while (0)
+static inline void __noreturn BUG(void)
+{
+ __asm__ __volatile__("break %0" : : "i" (BRK_BUG));
+ /* Fool GCC into thinking the function doesn't return. */
+ while (1)
+ ;
+}
#define HAVE_ARCH_BUG
#if (_MIPS_ISA > _MIPS_ISA_MIPS1)
-#define BUG_ON(condition) \
-do { \
- __asm__ __volatile__("tne $0, %0, %1" \
- : : "r" (condition), "i" (BRK_BUG)); \
-} while (0)
+static inline void __BUG_ON(unsigned long condition)
+{
+ if (__builtin_constant_p(condition)) {
+ if (condition)
+ BUG();
+ else
+ return;
+ }
+ __asm__ __volatile__("tne $0, %0, %1"
+ : : "r" (condition), "i" (BRK_BUG));
+}
+
+#define BUG_ON(C) __BUG_ON((unsigned long)(C))
#define HAVE_ARCH_BUG_ON
#ifndef _ASM_PTRACE_H
#define _ASM_PTRACE_H
-#ifdef CONFIG_64BIT
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-#endif
-
/* 0 - 31 are integer registers, 32 - 63 are fp registers. */
#define FPR_BASE 32
#define PC 64
#define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
struct task_struct;
#define arch_has_single_step() 1
void user_disable_single_step(struct task_struct *task);
extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
unsigned long pstart, unsigned long prot,
int psize, int ssize);
-extern void set_huge_psize(int psize);
extern void add_gpage(unsigned long addr, unsigned long page_size,
unsigned long number_of_pages);
extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);
#ifdef __powerpc64__
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */
#define STACK_FRAME_LR_SAVE 2 /* Location of LR in stack frame */
#define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265)
return err;
}
-void set_huge_psize(int psize)
+static void __init set_huge_psize(int psize)
{
/* Check that it is a page size supported by the hardware and
* that it fits within pagetable limits. */
extern void user_enable_single_step(struct task_struct *);
extern void user_disable_single_step(struct task_struct *);
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
#define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN)
#define user_stack_pointer(regs)((regs)->gprs[15])
};
extern struct global_reg_snapshot global_reg_snapshot[NR_CPUS];
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#define force_successful_syscall_return() \
do { current_thread_info()->syscall_noerror = 1; \
} while (0)
unsigned int fsr_storage;
-void __init cpu_probe(void)
+void __cpuinit cpu_probe(void)
{
int psr_impl, psr_vers, fpu_vers;
int i, psr;
.align 4
/* The Sparc trap table, bootloader gives us control at _start. */
- .text
+ .section .text.head,"ax"
.globl start, _stext, _start, __stext
.globl trapbase
_start: /* danger danger */
#include "irq.h"
-volatile unsigned long cpu_callin_map[NR_CPUS] __initdata = {0,};
+volatile unsigned long cpu_callin_map[NR_CPUS] __cpuinitdata = {0,};
unsigned char boot_cpu_id = 0;
unsigned char boot_cpu_id4 = 0; /* boot_cpu_id << 2 */
panic("SMP bolixed\n");
}
-struct linux_prom_registers smp_penguin_ctable __initdata = { 0 };
+struct linux_prom_registers smp_penguin_ctable __cpuinitdata = { 0 };
void smp_send_reschedule(int cpu)
{
"i" (ASI_M_CTL));
}
-void __init smp4d_callin(void)
+void __cpuinit smp4d_callin(void)
{
int cpuid = hard_smp4d_processor_id();
extern spinlock_t sun4d_imsk_lock;
extern unsigned int lvl14_resolution;
-static void __init smp_setup_percpu_timer(void)
+static void __cpuinit smp_setup_percpu_timer(void)
{
int cpu = hard_smp4d_processor_id();
extern unsigned int lvl14_resolution;
-static void __init smp_setup_percpu_timer(void)
+static void __cpuinit smp_setup_percpu_timer(void)
{
int cpu = smp_processor_id();
.globl sun4m_cpu_startup, __smp4m_processor_id
.globl sun4d_cpu_startup, __smp4d_processor_id
- __INIT
+ __CPUINIT
.align 4
/* When we start up a cpu for the first time it enters this routine.
/* CPUID in bootbus can be found at PA 0xff0140000 */
#define SUN4D_BOOTBUS_CPUID 0xf0140000
- __INIT
+ __CPUINIT
.align 4
sun4d_cpu_startup:
.text 0xf0004000 :
{
_text = .;
+ *(.text.head)
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
/* Paging initialization on the Sparc Reference MMU. */
extern void sparc_context_init(int);
-void (*poke_srmmu)(void) __initdata = NULL;
+void (*poke_srmmu)(void) __cpuinitdata = NULL;
extern unsigned long bootmem_init(unsigned long *pages_avail);
(int)vac_cache_size, (int)vac_line_size);
}
-static void __init poke_hypersparc(void)
+static void __cpuinit poke_hypersparc(void)
{
volatile unsigned long clear;
unsigned long mreg = srmmu_get_mmureg();
hypersparc_setup_blockops();
}
-static void __init poke_cypress(void)
+static void __cpuinit poke_cypress(void)
{
unsigned long mreg = srmmu_get_mmureg();
unsigned long faddr, tagval;
init_cypress_common();
}
-static void __init poke_swift(void)
+static void __cpuinit poke_swift(void)
{
unsigned long mreg;
}
-static void __init poke_turbosparc(void)
+static void __cpuinit poke_turbosparc(void)
{
unsigned long mreg = srmmu_get_mmureg();
unsigned long ccreg;
poke_srmmu = poke_turbosparc;
}
-static void __init poke_tsunami(void)
+static void __cpuinit poke_tsunami(void)
{
unsigned long mreg = srmmu_get_mmureg();
tsunami_setup_blockops();
}
-static void __init poke_viking(void)
+static void __cpuinit poke_viking(void)
{
unsigned long mreg = srmmu_get_mmureg();
static int smp_catch;
return 0;
}
-static int __devinit fire_probe(struct of_device *op,
+static int __init fire_probe(struct of_device *op,
const struct of_device_id *match)
{
struct device_node *dp = op->node;
psycho_scan_bus(pbm, &op->dev);
}
-static struct pci_pbm_info * __devinit psycho_find_sibling(u32 upa_portid)
+static struct pci_pbm_info * __init psycho_find_sibling(u32 upa_portid)
{
struct pci_pbm_info *pbm;
#define PSYCHO_CONFIGSPACE 0x001000000UL
-static int __devinit psycho_probe(struct of_device *op,
+static int __init psycho_probe(struct of_device *op,
const struct of_device_id *match)
{
const struct linux_prom64_registers *pr_regs;
return 0;
}
-static int __devinit pci_sun4v_probe(struct of_device *op,
+static int __init pci_sun4v_probe(struct of_device *op,
const struct of_device_id *match)
{
const struct linux_prom64_registers *regs;
return kern_base + (val - KERNBASE);
}
-static void ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
+static void __cpuinit ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
{
extern unsigned long sparc64_ttable_tl0;
extern unsigned long kern_locked_tte_data;
*/
static struct thread_info *cpu_new_thread = NULL;
-static int __devinit smp_boot_one_cpu(unsigned int cpu)
+static int __cpuinit smp_boot_one_cpu(unsigned int cpu)
{
struct trap_per_cpu *tb = &trap_block[cpu];
unsigned long entry =
return nid;
}
-static void add_node_ranges(void)
+static void __init add_node_ranges(void)
{
int i;
extern int do_set_thread_area(struct task_struct *p, int idx,
struct user_desc __user *info, int can_allocate);
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#endif /* __KERNEL__ */
#endif /* !__ASSEMBLY__ */
}
}
-void enable_IR_x2apic(void)
+void __init enable_IR_x2apic(void)
{
#ifdef CONFIG_INTR_REMAP
int ret;
}
#ifdef CONFIG_X86_LOCAL_APIC
-static void __devinit kvm_setup_secondary_clock(void)
+static void __cpuinit kvm_setup_secondary_clock(void)
{
/*
* Now that the first cpu already had this clocksource initialized,
alternatives_smp_switch(0);
}
-static void xen_play_dead(void)
+static void __cpuinit xen_play_dead(void) /* used only with CPU_HOTPLUG */
{
play_dead_common();
HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
void xen_mark_init_mm_pinned(void);
-void __init xen_setup_vcpu_info_placement(void);
+void xen_setup_vcpu_info_placement(void);
#ifdef CONFIG_SMP
void xen_smp_init(void);
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
val->intval = battery->current_now * 1000;
+ /* if power units are mW, convert to mA by
+ dividing by current voltage (mV/1000) */
+ if (!battery->power_unit) {
+ if (battery->voltage_now) {
+ val->intval /= battery->voltage_now;
+ val->intval *= 1000;
+ } else
+ val->intval = -1;
+ }
break;
case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
acpi_dmi_osi_linux(1, d); /* enable */
return 0;
}
-static int __init dmi_disable_osi_linux(const struct dmi_system_id *d)
-{
- acpi_dmi_osi_linux(0, d); /* disable */
- return 0;
-}
-static int __init dmi_unknown_osi_linux(const struct dmi_system_id *d)
-{
- acpi_dmi_osi_linux(-1, d); /* unknown */
- return 0;
-}
static int __init dmi_disable_osi_vista(const struct dmi_system_id *d)
{
printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
return 0;
}
-/*
- * Most BIOS that invoke OSI(Linux) do nothing with it.
- * But some cause Linux to break.
- * Only a couple use it to make Linux run better.
- *
- * Thus, Linux should continue to disable OSI(Linux) by default,
- * should continue to discourage BIOS writers from using it, and
- * should whitelist the few existing systems that require it.
- *
- * If it appears clear a vendor isn't using OSI(Linux)
- * for anything constructive, blacklist them by name to disable
- * unnecessary dmesg warnings on all of their products.
- */
-
static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
- /*
- * Disable OSI(Linux) warnings on all "Acer, inc."
- *
- * _OSI(Linux) disables the latest Windows BIOS code:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5050"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5580"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 3010"),
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Ferrari 5000"),
- */
- /*
- * note that dmi_check_system() uses strstr()
- * to match sub-strings rather than !strcmp(),
- * so "Acer" below matches "Acer, inc." above.
- */
- /*
- * Disable OSI(Linux) warnings on all "Acer"
- *
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720Z"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5520"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 6460"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 7510"),
- *
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5220"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Acer",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Apple Computer, Inc."
- * Disable OSI(Linux) warnings on all "Apple Inc."
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook2,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,1"),
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacPro2,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,1"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Apple",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "BenQ"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Joybook S31"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "BenQ",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "BenQ"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Clevo Co."
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "M570RU"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Clevo",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "COMPAL"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_BOARD_NAME, "HEL8X"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_BOARD_NAME, "IFL91"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Compal",
- .matches = {
- DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
- },
- },
- { /* OSI(Linux) touches USB, unknown side-effect */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell Dimension 5150",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM051"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell i1501",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1501"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell Latitude D830",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D830"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell OptiPlex GX620",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX620"),
- },
- },
- { /* OSI(Linux) causes some USB initialization to not run */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell OptiPlex 755",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 755"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE 1900",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1900"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE 1950",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell PE R200",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R200"),
- },
- },
- { /* OSI(Linux) touches USB */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell PR 390",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 390"),
- },
- },
- { /* OSI(Linux) touches USB */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PR 390",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 690"),
- },
- },
- { /* OSI(Linux) unknown - ASL looks benign, but may effect dock/SMM */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PR M4300",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision M4300"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell Vostro 1000",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1000"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE SC440",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge SC440"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dialogue Flybook V5",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dialogue Technology Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Flybook V5"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "FUJITSU SIEMENS"
- *
- * _OSI(Linux) disables latest Windows BIOS code:
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 2510"),
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1536"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1556"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 1546"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo M1425"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo Si 1520"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Fujitsu Siemens",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
- },
- },
{
.callback = dmi_disable_osi_vista,
.ident = "Fujitsu Siemens",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
},
},
+
/*
- * Disable OSI(Linux) warnings on all "Hewlett-Packard"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * .ident = "HP Pavilion tx 1000"
- * DMI_MATCH(DMI_BOARD_NAME, "30BF"),
- * .ident = "HP Pavilion dv2000"
- * DMI_MATCH(DMI_BOARD_NAME, "30B5"),
- * .ident = "HP Pavilion dv5000",
- * DMI_MATCH(DMI_BOARD_NAME, "30A7"),
- * .ident = "HP Pavilion dv6300 30BC",
- * DMI_MATCH(DMI_BOARD_NAME, "30BC"),
- * .ident = "HP Pavilion dv6000",
- * DMI_MATCH(DMI_BOARD_NAME, "30B7"),
- * DMI_MATCH(DMI_BOARD_NAME, "30B8"),
- * .ident = "HP Pavilion dv9000",
- * DMI_MATCH(DMI_BOARD_NAME, "30B9"),
- * .ident = "HP Pavilion dv9500",
- * DMI_MATCH(DMI_BOARD_NAME, "30CB"),
- * .ident = "HP/Compaq Presario C500",
- * DMI_MATCH(DMI_BOARD_NAME, "30C6"),
- * .ident = "HP/Compaq Presario F500",
- * DMI_MATCH(DMI_BOARD_NAME, "30D3"),
- * _OSI(Linux) unknown effect:
- * .ident = "HP Pavilion dv6500",
- * DMI_MATCH(DMI_BOARD_NAME, "30D0"),
+ * BIOS invocation of _OSI(Linux) is almost always a BIOS bug.
+ * Linux ignores it, except for the machines enumerated below.
*/
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Hewlett-Packard",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- },
- },
+
/*
* Lenovo has a mix of systems OSI(Linux) situations
* and thus we can not wildcard the vendor.
DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"),
},
},
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Lenovo 3000 V100",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "LENOVO3000 V100"),
- },
- },
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Lenovo 3000 N100",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "LG Electronics"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "P1-J150B"),
- * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
- *
- * unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "S1-MDGDG"),
- * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "LG",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
- },
- },
- /* NEC - OSI(Linux) effect unknown */
- {
- .callback = dmi_unknown_osi_linux,
- .ident = "NEC VERSA M360",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "NEC Computers SAS"),
- DMI_MATCH(DMI_PRODUCT_NAME, "NEC VERSA M360"),
- },
- },
- /* Panasonic */
- {
- .callback = dmi_unknown_osi_linux,
- .ident = "Panasonic",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
- /* Toughbook CF-52 */
- DMI_MATCH(DMI_PRODUCT_NAME, "CF-52CCABVBG"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Samsung Electronics"
- *
- * OSI(Linux) disables PNP0C32 and other BIOS code for Windows:
- * DMI_MATCH(DMI_PRODUCT_NAME, "R40P/R41P"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "R59P/R60P/R61P"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Samsung",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Sony Corporation"
- *
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NR11S_S"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ38GP_C"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ650N"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-TZ21MN_N"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ11M"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Sony",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "TOSHIBA"
- *
- * _OSI(Linux) breaks sound (bugzilla 7787):
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P105"),
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A210"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A135"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A200"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P205"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U305"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Toshiba",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- },
- },
{}
};
goto unlock;
err:
/* false interrupt, state didn't change */
- ++ec->curr->irq_count;
+ if (in_interrupt())
+ ++ec->curr->irq_count;
unlock:
spin_unlock_irqrestore(&ec->curr_lock, flags);
}
#include <linux/interrupt.h>
#include <linux/kmod.h>
#include <linux/delay.h>
-#include <linux/dmi.h>
#include <linux/workqueue.h>
#include <linux/nmi.h>
#include <linux/acpi.h>
static char osi_additional_string[OSI_STRING_LENGTH_MAX];
/*
- * "Ode to _OSI(Linux)"
+ * The story of _OSI(Linux)
*
- * osi_linux -- Control response to BIOS _OSI(Linux) query.
+ * From pre-history through Linux-2.6.22,
+ * Linux responded TRUE upon a BIOS OSI(Linux) query.
*
- * As Linux evolves, the features that it supports change.
- * So an OSI string such as "Linux" is not specific enough
- * to be useful across multiple versions of Linux. It
- * doesn't identify any particular feature, interface,
- * or even any particular version of Linux...
+ * Unfortunately, reference BIOS writers got wind of this
+ * and put OSI(Linux) in their example code, quickly exposing
+ * this string as ill-conceived and opening the door to
+ * an un-bounded number of BIOS incompatibilities.
*
- * Unfortunately, Linux-2.6.22 and earlier responded "yes"
- * to a BIOS _OSI(Linux) query. When
- * a reference mobile BIOS started using it, its use
- * started to spread to many vendor platforms.
- * As it is not supportable, we need to halt that spread.
+ * For example, OSI(Linux) was used on resume to re-POST a
+ * video card on one system, because Linux at that time
+ * could not do a speedy restore in its native driver.
+ * But then upon gaining quick native restore capability,
+ * Linux has no way to tell the BIOS to skip the time-consuming
+ * POST -- putting Linux at a permanent performance disadvantage.
+ * On another system, the BIOS writer used OSI(Linux)
+ * to infer native OS support for IPMI! On other systems,
+ * OSI(Linux) simply got in the way of Linux claiming to
+ * be compatible with other operating systems, exposing
+ * BIOS issues such as skipped device initialization.
*
- * Today, most BIOS references to _OSI(Linux) are noise --
- * they have no functional effect and are just dead code
- * carried over from the reference BIOS.
- *
- * The next most common case is that _OSI(Linux) harms Linux,
- * usually by causing the BIOS to follow paths that are
- * not tested during Windows validation.
- *
- * Finally, there is a short list of platforms
- * where OSI(Linux) benefits Linux.
- *
- * In Linux-2.6.23, OSI(Linux) is first disabled by default.
- * DMI is used to disable the dmesg warning about OSI(Linux)
- * on platforms where it is known to have no effect.
- * But a dmesg warning remains for systems where
- * we do not know if OSI(Linux) is good or bad for the system.
- * DMI is also used to enable OSI(Linux) for the machines
- * that are known to need it.
+ * So "Linux" turned out to be a really poor chose of
+ * OSI string, and from Linux-2.6.23 onward we respond FALSE.
*
* BIOS writers should NOT query _OSI(Linux) on future systems.
- * It will be ignored by default, and to get Linux to
- * not ignore it will require a kernel source update to
- * add a DMI entry, or a boot-time "acpi_osi=Linux" invocation.
+ * Linux will complain on the console when it sees it, and return FALSE.
+ * To get Linux to return TRUE for your system will require
+ * a kernel source update to add a DMI entry,
+ * or boot with "acpi_osi=Linux"
*/
-#define OSI_LINUX_ENABLE 0
static struct osi_linux {
unsigned int enable:1;
unsigned int dmi:1;
unsigned int cmdline:1;
unsigned int known:1;
-} osi_linux = { OSI_LINUX_ENABLE, 0, 0, 0};
+} osi_linux = { 0, 0, 0, 0};
static void __init acpi_request_region (struct acpi_generic_address *addr,
unsigned int length, char *desc)
return (AE_OK);
}
-/**
- * acpi_dmi_dump - dump DMI slots needed for blacklist entry
- *
- * Returns 0 on success
- */
-static int acpi_dmi_dump(void)
-{
-
- if (!dmi_available)
- return -1;
-
- printk(KERN_NOTICE PREFIX "DMI System Vendor: %s\n",
- dmi_get_system_info(DMI_SYS_VENDOR));
- printk(KERN_NOTICE PREFIX "DMI Product Name: %s\n",
- dmi_get_system_info(DMI_PRODUCT_NAME));
- printk(KERN_NOTICE PREFIX "DMI Product Version: %s\n",
- dmi_get_system_info(DMI_PRODUCT_VERSION));
- printk(KERN_NOTICE PREFIX "DMI Board Name: %s\n",
- dmi_get_system_info(DMI_BOARD_NAME));
- printk(KERN_NOTICE PREFIX "DMI BIOS Vendor: %s\n",
- dmi_get_system_info(DMI_BIOS_VENDOR));
- printk(KERN_NOTICE PREFIX "DMI BIOS Date: %s\n",
- dmi_get_system_info(DMI_BIOS_DATE));
-
- return 0;
-}
-
-
/******************************************************************************
*
* FUNCTION: acpi_os_validate_interface
osi_linux.cmdline ? " via cmdline" :
osi_linux.dmi ? " via DMI" : "");
- if (!osi_linux.dmi) {
- if (acpi_dmi_dump())
- printk(KERN_NOTICE PREFIX
- "[please extract dmidecode output]\n");
- printk(KERN_NOTICE PREFIX
- "Please send DMI info above to "
- "linux-acpi@vger.kernel.org\n");
- }
- if (!osi_linux.known && !osi_linux.cmdline) {
- printk(KERN_NOTICE PREFIX
- "If \"acpi_osi=%sLinux\" works better, "
- "please notify linux-acpi@vger.kernel.org\n",
- osi_linux.enable ? "!" : "");
- }
-
if (osi_linux.enable)
return AE_OK;
}
if (!acpi_match_device_ids(device, button_device_ids))
device->wakeup.flags.run_wake = 1;
- /*
- * Don't set Power button GPE as run_wake
- * if Fixed Power button is used
- */
- if (!strcmp(device->pnp.hardware_id, "PNP0C0C") &&
- !(acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON)) {
- device->wakeup.flags.run_wake = 0;
- device->wakeup.flags.valid = 0;
- }
-
end:
if (ACPI_FAILURE(status))
device->flags.wake_capable = 0;
old_suspend_ordering = true;
}
+/*
+ * According to the ACPI specification the BIOS should make sure that ACPI is
+ * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still,
+ * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
+ * on such systems during resume. Unfortunately that doesn't help in
+ * particularly pathological cases in which SCI_EN has to be set directly on
+ * resume, although the specification states very clearly that this flag is
+ * owned by the hardware. The set_sci_en_on_resume variable will be set in such
+ * cases.
+ */
+static bool set_sci_en_on_resume;
+
/**
* acpi_pm_disable_gpes - Disable the GPEs.
*/
}
/* If ACPI is not enabled by the BIOS, we need to enable it here. */
- acpi_enable();
+ if (set_sci_en_on_resume)
+ acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1);
+ else
+ acpi_enable();
+
/* Reprogram control registers and execute _BFS */
acpi_leave_sleep_state_prep(acpi_state);
return 0;
}
+static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d)
+{
+ set_sci_en_on_resume = true;
+ return 0;
+}
+
static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
{
.callback = init_old_suspend_ordering,
DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
},
},
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Apple MacBook 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Apple MacMini 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+ },
+ },
{},
};
#endif /* CONFIG_SUSPEND */
ret = input_register_polled_device(toshiba_acpi.poll_dev);
if (ret) {
printk(MY_ERR "unable to register kill-switch input device\n");
- rfkill_free(toshiba_acpi.rfk_dev);
- toshiba_acpi.rfk_dev = NULL;
toshiba_acpi_exit();
return ret;
}
struct acpi_object_list *arguments, unsigned long long *data)
{
acpi_status status = AE_OK;
- union acpi_object *element;
+ union acpi_object element;
struct acpi_buffer buffer = { 0, NULL };
-
if (!data)
return AE_BAD_PARAMETER;
- element = kzalloc(sizeof(union acpi_object), irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL);
- if (!element)
- return AE_NO_MEMORY;
-
buffer.length = sizeof(union acpi_object);
- buffer.pointer = element;
+ buffer.pointer = &element;
status = acpi_evaluate_object(handle, pathname, arguments, &buffer);
if (ACPI_FAILURE(status)) {
acpi_util_eval_error(handle, pathname, status);
- kfree(element);
return status;
}
- if (element->type != ACPI_TYPE_INTEGER) {
+ if (element.type != ACPI_TYPE_INTEGER) {
acpi_util_eval_error(handle, pathname, AE_BAD_DATA);
- kfree(element);
return AE_BAD_DATA;
}
- *data = element->integer.value;
- kfree(element);
+ *data = element.integer.value;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Return value [%llu]\n", *data));
static int uninorth_rev;
static int is_u3;
-static char __devinitdata *aperture = NULL;
+static char *aperture = NULL;
static int uninorth_fetch_size(void)
{
* do is go probing around in the usual places hoping we can find it.
*/
-static int stli_findeisabrds(void)
+static int __init stli_findeisabrds(void)
{
struct stlibrd *brdp;
unsigned int iobase, eid, i;
* can find.
*/
-static int stli_initbrds(void)
+static int __init stli_initbrds(void)
{
struct stlibrd *brdp, *nxtbrdp;
struct stlconf conf;
return ret;
}
-static int __devexit talitos_remove(struct of_device *ofdev)
+static int talitos_remove(struct of_device *ofdev)
{
struct device *dev = &ofdev->dev;
struct talitos_private *priv = dev_get_drvdata(dev);
.name = "talitos",
.match_table = talitos_match,
.probe = talitos_probe,
- .remove = __devexit_p(talitos_remove),
+ .remove = talitos_remove,
};
static int __init talitos_init(void)
hw->chipset = ide_acorn;
}
-static int __init
+static int __devinit
icside_register_v5(struct icside_state *state, struct expansion_card *ec)
{
void __iomem *base;
.swdma_mask = ATA_SWDMA2,
};
-static int __init
+static int __devinit
icside_register_v6(struct icside_state *state, struct expansion_card *ec)
{
void __iomem *ioc_base, *easi_base;
{
struct ml_device *ml = dev->ff->private;
struct ml_effect_state *state = &ml->states[effect_id];
+ unsigned long flags;
- spin_lock_bh(&ml->timer_lock);
+ spin_lock_irqsave(&ml->timer_lock, flags);
if (value > 0) {
debug("initiated play");
ml_play_effects(ml);
}
- spin_unlock_bh(&ml->timer_lock);
+ spin_unlock_irqrestore(&ml->timer_lock, flags);
return 0;
}
atkbd_disable(atkbd);
/* make sure we don't have a command in flight */
- flush_scheduled_work();
+ cancel_delayed_work_sync(&atkbd->event_work);
sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
input_unregister_device(atkbd->dev);
atkbd->force_release_mask);
}
+/*
+ * Inventec system with broken key release on volume keys
+ */
+static void atkbd_inventec_keymap_fixup(struct atkbd *atkbd)
+{
+ const unsigned int forced_release_keys[] = {
+ 0xae, 0xb0,
+ };
+ int i;
+
+ if (atkbd->set == 2)
+ for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++)
+ __set_bit(forced_release_keys[i],
+ atkbd->force_release_mask);
+}
+
/*
* atkbd_set_keycode_table() initializes keyboard's keycode table
* according to the selected scancode set
.callback = atkbd_setup_fixup,
.driver_data = atkbd_hp_keymap_fixup,
},
+ {
+ .ident = "Inventec Symphony",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
+ },
+ .callback = atkbd_setup_fixup,
+ .driver_data = atkbd_inventec_keymap_fixup,
+ },
{ }
};
static char *phone = "kip1000";
module_param(phone, charp, S_IRUSR);
-MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01}");
+MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}");
enum {
/* HID Registers */
}
}
+/*
+ * Keymap for ATCom AU-100
+ * http://www.atcom.cn/En_products_AU100.html
+ * http://www.packetizer.com/products/au100/
+ * http://www.voip-info.org/wiki/view/AU-100
+ *
+ * Contributed by daniel@gimpelevich.san-francisco.ca.us
+ */
+static unsigned short keymap_atcom(int scancode)
+{
+ switch (scancode) { /* phone key: */
+ case 0x82: return KEY_NUMERIC_0; /* 0 */
+ case 0x11: return KEY_NUMERIC_1; /* 1 */
+ case 0x12: return KEY_NUMERIC_2; /* 2 */
+ case 0x14: return KEY_NUMERIC_3; /* 3 */
+ case 0x21: return KEY_NUMERIC_4; /* 4 */
+ case 0x22: return KEY_NUMERIC_5; /* 5 */
+ case 0x24: return KEY_NUMERIC_6; /* 6 */
+ case 0x41: return KEY_NUMERIC_7; /* 7 */
+ case 0x42: return KEY_NUMERIC_8; /* 8 */
+ case 0x44: return KEY_NUMERIC_9; /* 9 */
+ case 0x84: return KEY_NUMERIC_POUND; /* # */
+ case 0x81: return KEY_NUMERIC_STAR; /* * */
+ case 0x18: return KEY_ENTER; /* pickup */
+ case 0x28: return KEY_ESC; /* hangup */
+ case 0x48: return KEY_LEFT; /* left arrow */
+ case 0x88: return KEY_RIGHT; /* right arrow */
+ default: return special_keymap(scancode);
+ }
+}
+
static unsigned short (*keymap)(int) = keymap_kip1000;
/*
keymap = keymap_usbph01;
printk(KERN_INFO KBUILD_MODNAME ": "
"Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
+ } else if (!strcasecmp(phone, "atcom")) {
+ keymap = keymap_atcom;
+ printk(KERN_INFO KBUILD_MODNAME ": "
+ "Keymap for ATCom AU-100 phone loaded\n");
} else {
printk(KERN_ERR KBUILD_MODNAME ": "
"Unsupported phone: %s\n", phone);
*/
static int hgpk_validate_byte(unsigned char *packet)
{
- return (packet[0] & 0x0C) == 0x08;
+ return (packet[0] & 0x0C) != 0x08;
}
static void hgpk_process_packet(struct psmouse *psmouse)
DMI_MATCH(DMI_PRODUCT_NAME, "2656"),
},
},
+ {
+ .ident = "Dell XPS M1530",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"),
+ },
+ },
+ {
+ .ident = "Compal HEL80I",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"),
+ },
+ },
{ }
};
* - Support Intuos3 4x6
* v1.47 (pc) - Added support for Bamboo
* v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX
+ * v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A)
*/
/*
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.48"
+#define DRIVER_VERSION "v1.49"
#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
#define DRIVER_LICENSE "GPL"
struct usb_device *usbdev;
struct usb_interface *intf;
struct urb *irq;
- struct wacom_wac * wacom_wac;
+ struct wacom_wac *wacom_wac;
struct mutex lock;
unsigned int open:1;
char phys[32];
};
struct wacom_combo {
- struct wacom * wacom;
- struct urb * urb;
+ struct wacom *wacom;
+ struct urb *urb;
};
extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
extern __u16 wacom_le16_to_cpu(unsigned char *data);
extern __u16 wacom_be16_to_cpu(unsigned char *data);
-extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id);
-extern const struct usb_device_id * get_device_table(void);
+extern struct wacom_features *get_wacom_feature(const struct usb_device_id *id);
+extern const struct usb_device_id *get_device_table(void);
#endif
#include "wacom.h"
#include "wacom_wac.h"
+/* defines to get HID report descriptor */
+#define HID_DEVICET_HID (USB_TYPE_CLASS | 0x01)
+#define HID_DEVICET_REPORT (USB_TYPE_CLASS | 0x02)
+#define HID_USAGE_UNDEFINED 0x00
+#define HID_USAGE_PAGE 0x05
+#define HID_USAGE_PAGE_DIGITIZER 0x0d
+#define HID_USAGE_PAGE_DESKTOP 0x01
+#define HID_USAGE 0x09
+#define HID_USAGE_X 0x30
+#define HID_USAGE_Y 0x31
+#define HID_USAGE_X_TILT 0x3d
+#define HID_USAGE_Y_TILT 0x3e
+#define HID_USAGE_FINGER 0x22
+#define HID_USAGE_STYLUS 0x20
+#define HID_COLLECTION 0xc0
+
+enum {
+ WCM_UNDEFINED = 0,
+ WCM_DESKTOP,
+ WCM_DIGITIZER,
+};
+
+struct hid_descriptor {
+ struct usb_descriptor_header header;
+ __le16 bcdHID;
+ u8 bCountryCode;
+ u8 bNumDescriptors;
+ u8 bDescriptorType;
+ __le16 wDescriptorLength;
+} __attribute__ ((packed));
+
+/* defines to get/set USB message */
#define USB_REQ_GET_REPORT 0x01
#define USB_REQ_SET_REPORT 0x09
+#define WAC_HID_FEATURE_REPORT 0x03
static int usb_get_report(struct usb_interface *intf, unsigned char type,
unsigned char id, void *buf, int size)
void wacom_report_key(void *wcombo, unsigned int key_type, int key_data)
{
input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data);
- return;
}
void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data)
{
input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data);
- return;
}
void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data)
{
input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data);
- return;
}
void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value)
{
input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value);
- return;
}
__u16 wacom_be16_to_cpu(unsigned char *data)
void wacom_input_sync(void *wcombo)
{
input_sync(get_input_dev((struct wacom_combo *)wcombo));
- return;
}
static int wacom_open(struct input_dev *dev)
void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_1) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_1) |
BIT_MASK(BTN_5);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
}
input_dev->evbit[0] |= BIT_MASK(EV_MSC);
input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
BIT_MASK(BTN_4);
}
{
input_dev->evbit[0] |= BIT_MASK(EV_REL);
input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
+ input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_STYLUS2);
void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3);
input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_4) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_4) |
BIT_MASK(BTN_5) | BIT_MASK(BTN_6) | BIT_MASK(BTN_7);
input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
}
void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
}
void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
input_dev->evbit[0] |= BIT_MASK(EV_MSC) | BIT_MASK(EV_REL);
input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
+ input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE) |
BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2) |
- BIT_MASK(BTN_TOOL_RUBBER);
+ input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2);
}
void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER);
}
+static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc,
+ struct wacom_wac *wacom_wac)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct wacom_features *features = wacom_wac->features;
+ char limit = 0, result = 0;
+ int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0;
+ unsigned char *report;
+
+ report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL);
+ if (!report)
+ return -ENOMEM;
+
+ /* retrive report descriptors */
+ do {
+ result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ USB_REQ_GET_DESCRIPTOR,
+ USB_RECIP_INTERFACE | USB_DIR_IN,
+ HID_DEVICET_REPORT << 8,
+ intf->altsetting[0].desc.bInterfaceNumber, /* interface */
+ report,
+ hid_desc->wDescriptorLength,
+ 5000); /* 5 secs */
+ } while (result < 0 && limit++ < 5);
+
+ if (result < 0)
+ goto out;
+
+ for (i = 0; i < hid_desc->wDescriptorLength; i++) {
+
+ switch (report[i]) {
+ case HID_USAGE_PAGE:
+ switch (report[i + 1]) {
+ case HID_USAGE_PAGE_DIGITIZER:
+ usage = WCM_DIGITIZER;
+ i++;
+ break;
+
+ case HID_USAGE_PAGE_DESKTOP:
+ usage = WCM_DESKTOP;
+ i++;
+ break;
+ }
+ break;
+
+ case HID_USAGE:
+ switch (report[i + 1]) {
+ case HID_USAGE_X:
+ if (usage == WCM_DESKTOP) {
+ if (finger) {
+ features->touch_x_max =
+ features->touch_y_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ features->x_max =
+ wacom_le16_to_cpu(&report[i + 6]);
+ i += 7;
+ } else if (pen) {
+ features->x_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ i += 4;
+ }
+ } else if (usage == WCM_DIGITIZER) {
+ /* max pressure isn't reported
+ features->pressure_max = (unsigned short)
+ (report[i+4] << 8 | report[i + 3]);
+ */
+ features->pressure_max = 255;
+ i += 4;
+ }
+ break;
+
+ case HID_USAGE_Y:
+ if (usage == WCM_DESKTOP)
+ features->y_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ i += 4;
+ break;
+
+ case HID_USAGE_FINGER:
+ finger = 1;
+ i++;
+ break;
+
+ case HID_USAGE_STYLUS:
+ pen = 1;
+ i++;
+ break;
+
+ case HID_USAGE_UNDEFINED:
+ if (usage == WCM_DESKTOP && finger) /* capacity */
+ features->pressure_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ i += 4;
+ break;
+ }
+ break;
+
+ case HID_COLLECTION:
+ /* reset UsagePage ans Finger */
+ finger = usage = 0;
+ break;
+ }
+ }
+
+ result = 0;
+
+ out:
+ kfree(report);
+ return result;
+}
+
static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_host_interface *interface = intf->cur_altsetting;
struct usb_endpoint_descriptor *endpoint;
struct wacom *wacom;
struct wacom_wac *wacom_wac;
+ struct wacom_features *features;
struct input_dev *input_dev;
int error = -ENOMEM;
char rep_data[2], limit = 0;
+ struct hid_descriptor *hid_desc;
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL);
usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
- wacom_wac->features = get_wacom_feature(id);
- BUG_ON(wacom_wac->features->pktlen > 10);
+ wacom_wac->features = features = get_wacom_feature(id);
+ BUG_ON(features->pktlen > 10);
input_dev->name = wacom_wac->features->name;
wacom->wacom_wac = wacom_wac;
input_dev->open = wacom_open;
input_dev->close = wacom_close;
+ endpoint = &intf->cur_altsetting->endpoint[0].desc;
+
+ /* TabletPC need to retrieve the physical and logical maximum from report descriptor */
+ if (wacom_wac->features->type == TABLETPC) {
+ if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
+ if (usb_get_extra_descriptor(&interface->endpoint[0],
+ HID_DEVICET_REPORT, &hid_desc)) {
+ printk("wacom: can not retrive extra class descriptor\n");
+ goto fail2;
+ }
+ }
+ error = wacom_parse_hid(intf, hid_desc, wacom_wac);
+ if (error)
+ goto fail2;
+ }
+
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_PEN) |
BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS);
- input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0);
- input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0);
- input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0);
+ if (features->type == TABLETPC) {
+ input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_DOUBLETAP);
+ input_set_abs_params(input_dev, ABS_RX, 0, features->touch_x_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_RY, 0, features->touch_y_max, 4, 0);
+ }
input_dev->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC);
wacom_init_input_dev(input_dev, wacom_wac);
- endpoint = &intf->cur_altsetting->endpoint[0].desc;
-
usb_fill_int_urb(wacom->irq, dev,
usb_rcvintpipe(dev, endpoint->bEndpointAddress),
wacom_wac->data, wacom_wac->features->pktlen,
if (error)
goto fail3;
- /* Ask the tablet to report tablet data. Repeat until it succeeds */
- do {
- rep_data[0] = 2;
- rep_data[1] = 2;
- usb_set_report(intf, 3, 2, rep_data, 2);
- usb_get_report(intf, 3, 2, rep_data, 2);
- } while (rep_data[1] != 2 && limit++ < 5);
+ /*
+ * Ask the tablet to report tablet data if it is not a Tablet PC.
+ * Repeat until it succeeds
+ */
+ if (wacom_wac->features->type != TABLETPC) {
+ do {
+ rep_data[0] = 2;
+ rep_data[1] = 2;
+ error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
+ 2, rep_data, 2);
+ if (error >= 0)
+ error = usb_get_report(intf,
+ WAC_HID_FEATURE_REPORT, 2,
+ rep_data, 2);
+ } while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
+ }
usb_set_intfdata(intf, wacom);
return 0;
usb_kill_urb(wacom->irq);
input_unregister_device(wacom->dev);
usb_free_urb(wacom->irq);
- usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma);
+ usb_buffer_free(interface_to_usbdev(intf), 10,
+ wacom->wacom_wac->data, wacom->data_dma);
kfree(wacom->wacom_wac);
kfree(wacom);
}
return 1;
}
+int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
+{
+ char *data = wacom->data;
+ int prox = 0, pressure;
+ static int stylusInProx, touchInProx = 1, touchOut;
+ struct urb *urb = ((struct wacom_combo *)wcombo)->urb;
+
+ dbg("wacom_tpc_irq: received report #%d", data[0]);
+
+ if (urb->actual_length == 5 || data[0] == 6) { /* Touch data */
+ if (urb->actual_length == 5) { /* with touch */
+ prox = data[0] & 0x03;
+ } else { /* with capacity */
+ prox = data[1] & 0x03;
+ }
+
+ if (!stylusInProx) { /* stylus not in prox */
+ if (prox) {
+ if (touchInProx) {
+ wacom->tool[1] = BTN_TOOL_DOUBLETAP;
+ wacom->id[0] = TOUCH_DEVICE_ID;
+ if (urb->actual_length != 5) {
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+ wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6]));
+ wacom_report_key(wcombo, BTN_TOUCH, wacom_le16_to_cpu(&data[6]));
+ } else {
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
+ wacom_report_key(wcombo, BTN_TOUCH, 1);
+ }
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
+ touchOut = 1;
+ return 1;
+ }
+ } else {
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ touchOut = 0;
+ touchInProx = 1;
+ return 1;
+ }
+ } else if (touchOut || !prox) { /* force touch out-prox */
+ wacom_report_abs(wcombo, ABS_MISC, TOUCH_DEVICE_ID);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ touchOut = 0;
+ touchInProx = 1;
+ return 1;
+ }
+ } else if (data[0] == 2) { /* Penabled */
+ prox = data[1] & 0x20;
+
+ touchInProx = 0;
+
+ wacom->id[0] = ERASER_DEVICE_ID;
+
+ /*
+ * if going from out of proximity into proximity select between the eraser
+ * and the pen based on the state of the stylus2 button, choose eraser if
+ * pressed else choose pen. if not a proximity change from out to in, send
+ * an out of proximity for previous tool then a in for new tool.
+ */
+ if (prox) { /* in prox */
+ if (!wacom->tool[0]) {
+ /* Going into proximity select tool */
+ wacom->tool[1] = (data[1] & 0x08) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+ if (wacom->tool[1] == BTN_TOOL_PEN)
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ } else if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[1] & 0x08)) {
+ /*
+ * was entered with stylus2 pressed
+ * report out proximity for previous tool
+ */
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ wacom_report_key(wcombo, wacom->tool[1], 0);
+ wacom_input_sync(wcombo);
+
+ /* set new tool */
+ wacom->tool[1] = BTN_TOOL_PEN;
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ return 0;
+ }
+ if (wacom->tool[1] != BTN_TOOL_RUBBER) {
+ /* Unknown tool selected default to pen tool */
+ wacom->tool[1] = BTN_TOOL_PEN;
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ }
+ wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
+ wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+ pressure = ((data[7] & 0x01) << 8) | data[6];
+ if (pressure < 0)
+ pressure = wacom->features->pressure_max + pressure + 1;
+ wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
+ wacom_report_key(wcombo, BTN_TOUCH, pressure);
+ } else {
+ wacom_report_abs(wcombo, ABS_PRESSURE, 0);
+ wacom_report_key(wcombo, BTN_STYLUS, 0);
+ wacom_report_key(wcombo, BTN_STYLUS2, 0);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ }
+ wacom_report_key(wcombo, wacom->tool[1], prox);
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ stylusInProx = prox;
+ wacom->tool[0] = prox;
+ return 1;
+ }
+ return 0;
+}
+
int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
{
switch (wacom_wac->features->type) {
case PENPARTNER:
- return (wacom_penpartner_irq(wacom_wac, wcombo));
- break;
+ return wacom_penpartner_irq(wacom_wac, wcombo);
+
case PL:
- return (wacom_pl_irq(wacom_wac, wcombo));
- break;
+ return wacom_pl_irq(wacom_wac, wcombo);
+
case WACOM_G4:
case GRAPHIRE:
case WACOM_MO:
- return (wacom_graphire_irq(wacom_wac, wcombo));
- break;
+ return wacom_graphire_irq(wacom_wac, wcombo);
+
case PTU:
- return (wacom_ptu_irq(wacom_wac, wcombo));
- break;
+ return wacom_ptu_irq(wacom_wac, wcombo);
+
case INTUOS:
case INTUOS3S:
case INTUOS3:
case INTUOS3L:
case CINTIQ:
case WACOM_BEE:
- return (wacom_intuos_irq(wacom_wac, wcombo));
- break;
+ return wacom_intuos_irq(wacom_wac, wcombo);
+
+ case TABLETPC:
+ return wacom_tpc_irq(wacom_wac, wcombo);
+
default:
return 0;
}
/* fall through */
case INTUOS3S:
input_dev_i3s(input_dev, wacom_wac);
+ /* fall through */
case INTUOS:
input_dev_i(input_dev, wacom_wac);
break;
case PL:
case PTU:
+ case TABLETPC:
input_dev_pl(input_dev, wacom_wac);
- break;
+ /* fall through */
case PENPARTNER:
input_dev_pt(input_dev, wacom_wac);
break;
{ "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 },
{ "Wacom BambooFun 4x5", 9, 14760, 9225, 511, 63, WACOM_MO },
{ "Wacom BambooFun 6x8", 9, 21648, 13530, 511, 63, WACOM_MO },
+ { "Wacom Bamboo1 Medium",8, 16704, 12064, 511, 63, GRAPHIRE },
{ "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE },
{ "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE },
{ "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE },
{ "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ },
{ "Wacom Cintiq 20WSX", 10, 86680, 54180, 1023, 63, WACOM_BEE },
{ "Wacom Cintiq 12WX", 10, 53020, 33440, 1023, 63, WACOM_BEE },
+ { "Wacom DTU1931", 8, 37832, 30305, 511, 0, PL },
+ { "Wacom ISDv4 90", 8, 26202, 16325, 255, 0, TABLETPC },
+ { "Wacom ISDv4 93", 8, 26202, 16325, 255, 0, TABLETPC },
+ { "Wacom ISDv4 9A", 8, 26202, 16325, 255, 0, TABLETPC },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS },
{ }
};
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x17) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x18) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x19) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC5) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC7) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x90) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x93) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x9A) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
{ }
};
-const struct usb_device_id * get_device_table(void) {
- const struct usb_device_id * id_table = wacom_ids;
+const struct usb_device_id *get_device_table(void)
+{
+ const struct usb_device_id *id_table = wacom_ids;
+
return id_table;
}
-struct wacom_features * get_wacom_feature(const struct usb_device_id * id) {
+struct wacom_features * get_wacom_feature(const struct usb_device_id *id)
+{
int index = id - wacom_ids;
struct wacom_features *wf = &wacom_features[index];
+
return wf;
}
#define WACOM_WAC_H
#define STYLUS_DEVICE_ID 0x02
+#define TOUCH_DEVICE_ID 0x03
#define CURSOR_DEVICE_ID 0x06
#define ERASER_DEVICE_ID 0x0A
#define PAD_DEVICE_ID 0x0F
CINTIQ,
WACOM_BEE,
WACOM_MO,
+ TABLETPC,
MAX_TYPE
};
int pressure_max;
int distance_max;
int type;
+ int touch_x_max;
+ int touch_y_max;
};
struct wacom_wac {
input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
printk(KERN_INFO "elo: %sTouch touchscreen, fw: %02x.%02x, "
- "features: %x02x, controller: 0x%02x\n",
+ "features: 0x%02x, controller: 0x%02x\n",
elo_types[(packet[1] -'0') & 0x03],
packet[5], packet[4], packet[3], packet[7]);
{ "" }
};
-static struct xenbus_driver xenkbd = {
+static struct xenbus_driver xenkbd_driver = {
.name = "vkbd",
.owner = THIS_MODULE,
.ids = xenkbd_ids,
if (xen_initial_domain())
return -ENODEV;
- return xenbus_register_frontend(&xenkbd);
+ return xenbus_register_frontend(&xenkbd_driver);
}
static void __exit xenkbd_cleanup(void)
{
- xenbus_unregister_driver(&xenkbd);
+ xenbus_unregister_driver(&xenkbd_driver);
}
module_init(xenkbd_init);
memcpy(&cards[i], &cards[i + 1], sizeof(cards[i]));
}
-static int HiSax_inithardware(int *busy_flag)
+static int __init HiSax_inithardware(int *busy_flag)
{
int foundcards = 0;
int i = 0;
printk(KERN_INFO "HiSax module removed\n");
}
-int hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card)
+#ifdef CONFIG_HOTPLUG
+
+int __devinit hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card)
{
u_char ids[16];
int ret = -1;
}
EXPORT_SYMBOL(hisax_init_pcmcia);
+#endif
+
EXPORT_SYMBOL(HiSax_closecard);
#include "hisax_if.h"
static void hisax_bh(struct work_struct *work);
static void EChannel_proc_rcv(struct hisax_d_if *d_if);
+static int hisax_setup_card_dynamic(struct IsdnCard *card)
+{
+ return 2;
+}
+
int hisax_register(struct hisax_d_if *hisax_d_if, struct hisax_b_if *b_if[],
char *name, int protocol)
{
cards[i].protocol = protocol;
sprintf(id, "%s%d", name, i);
nrcards++;
- retval = checkcard(i, id, NULL, hisax_d_if->owner, hisax_cs_setup_card);
+ retval = checkcard(i, id, NULL, hisax_d_if->owner,
+ hisax_setup_card_dynamic);
if (retval == 0) { // yuck
cards[i].typ = 0;
nrcards--;
cancel_rearming_delayed_work(&rm->cpu[1].sniffer);
}
-static int rackmeter_setup(struct rackmeter *rm)
+static int __devinit rackmeter_setup(struct rackmeter *rm)
{
pr_debug("rackmeter: setting up i2s..\n");
rackmeter_setup_i2s(rm);
{ }
};
-static struct macio_driver rackmeter_drv = {
+static struct macio_driver rackmeter_driver = {
.name = "rackmeter",
.owner = THIS_MODULE,
.match_table = rackmeter_match,
.probe = rackmeter_probe,
- .remove = rackmeter_remove,
+ .remove = __devexit_p(rackmeter_remove),
.shutdown = rackmeter_shutdown,
};
{
pr_debug("rackmeter_init()\n");
- return macio_register_driver(&rackmeter_drv);
+ return macio_register_driver(&rackmeter_driver);
}
static void __exit rackmeter_exit(void)
{
pr_debug("rackmeter_exit()\n");
- macio_unregister_driver(&rackmeter_drv);
+ macio_unregister_driver(&rackmeter_driver);
}
module_init(rackmeter_init);
goto outinput;
}
- if (!acpi_video_backlight_support()) {
- printk(KERN_INFO DRV_PFX "Sony: Brightness ignored, must be "
+ if (acpi_video_backlight_support()) {
+ printk(KERN_INFO DRV_PFX "brightness ignored, must be "
"controlled by ACPI video driver\n");
} else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT",
&handle))) {
static u8 fan_control_initial_status;
static u8 fan_control_desired_level;
+static u8 fan_control_resume_level;
static int fan_watchdog_maxinterval;
static struct mutex fan_mutex;
case TPACPI_FAN_WR_ACPI_FANS:
case TPACPI_FAN_WR_TPEC:
- if ((level != TP_EC_FAN_AUTO) &&
- (level != TP_EC_FAN_FULLSPEED) &&
+ if (!(level & TP_EC_FAN_AUTO) &&
+ !(level & TP_EC_FAN_FULLSPEED) &&
((level < 0) || (level > 7)))
return -EINVAL;
static void fan_suspend(pm_message_t state)
{
+ int rc;
+
if (!fan_control_allowed)
return;
/* Store fan status in cache */
- fan_get_status_safe(NULL);
+ fan_control_resume_level = 0;
+ rc = fan_get_status_safe(&fan_control_resume_level);
+ if (rc < 0)
+ printk(TPACPI_NOTICE
+ "failed to read fan level for later "
+ "restore during resume: %d\n", rc);
+
+ /* if it is undefined, don't attempt to restore it.
+ * KEEP THIS LAST */
if (tp_features.fan_ctrl_status_undef)
- fan_control_desired_level = TP_EC_FAN_AUTO;
+ fan_control_resume_level = 0;
}
static void fan_resume(void)
{
- u8 saved_fan_level;
u8 current_level = 7;
bool do_set = false;
+ int rc;
/* DSDT *always* updates status on resume */
tp_features.fan_ctrl_status_undef = 0;
- saved_fan_level = fan_control_desired_level;
if (!fan_control_allowed ||
+ !fan_control_resume_level ||
(fan_get_status_safe(¤t_level) < 0))
return;
switch (fan_control_access_mode) {
case TPACPI_FAN_WR_ACPI_SFAN:
- do_set = (saved_fan_level > current_level);
+ /* never decrease fan level */
+ do_set = (fan_control_resume_level > current_level);
break;
case TPACPI_FAN_WR_ACPI_FANS:
case TPACPI_FAN_WR_TPEC:
- do_set = ((saved_fan_level & TP_EC_FAN_FULLSPEED) ||
- (saved_fan_level == 7 &&
- !(current_level & TP_EC_FAN_FULLSPEED)));
+ /* never decrease fan level, scale is:
+ * TP_EC_FAN_FULLSPEED > 7 >= TP_EC_FAN_AUTO
+ *
+ * We expect the firmware to set either 7 or AUTO, but we
+ * handle FULLSPEED out of paranoia.
+ *
+ * So, we can safely only restore FULLSPEED or 7, anything
+ * else could slow the fan. Restoring AUTO is useless, at
+ * best that's exactly what the DSDT already set (it is the
+ * slower it uses).
+ *
+ * Always keep in mind that the DSDT *will* have set the
+ * fans to what the vendor supposes is the best level. We
+ * muck with it only to speed the fan up.
+ */
+ if (fan_control_resume_level != 7 &&
+ !(fan_control_resume_level & TP_EC_FAN_FULLSPEED))
+ return;
+ else
+ do_set = !(current_level & TP_EC_FAN_FULLSPEED) &&
+ (current_level != fan_control_resume_level);
break;
default:
return;
if (do_set) {
printk(TPACPI_NOTICE
"restoring fan level to 0x%02x\n",
- saved_fan_level);
- fan_set_level_safe(saved_fan_level);
+ fan_control_resume_level);
+ rc = fan_set_level_safe(fan_control_resume_level);
+ if (rc < 0)
+ printk(TPACPI_NOTICE
+ "failed to restore fan level: %d\n", rc);
}
}
* Once we know the feature-set enabled for the device, we'll cache
* the register offset the descriptor ring is assigned to.
**/
-static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
+static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
{
int feature_mask = 0, rss_i;
int i, txr_idx, rxr_idx;
* number of queues at compile-time. The polling_netdev array is
* intended for Multiqueue, but should work fine with a single queue.
**/
-static int __devinit ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
+static int ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
{
int i;
* Attempt to configure the interrupts using the best available
* capabilities of the hardware and the kernel.
**/
-static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter
- *adapter)
+static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
{
int err = 0;
int vector, v_budget;
* - Hardware queue count (num_*_queues)
* - defined by miscellaneous hardware support/features (RSS, etc.)
**/
-static int __devinit ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
+static int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
{
int err;
return 0;
}
-static int ibmtr_resume(struct pcmcia_device *link)
+static int __devinit ibmtr_resume(struct pcmcia_device *link)
{
ibmtr_dev_t *info = link->priv;
struct net_device *dev = info->dev;
* This routine has a simple purpose -- make the SMC chip generate an
* interrupt, so an auto-detect routine can detect it, and find the IRQ,
*/
-static int __init smc911x_findirq(struct net_device *dev)
+static int __devinit smc911x_findirq(struct net_device *dev)
{
struct smc911x_local *lp = netdev_priv(dev);
int timeout = 20;
* o actually GRAB the irq.
* o GRAB the region
*/
-static int __init smc911x_probe(struct net_device *dev)
+static int __devinit smc911x_probe(struct net_device *dev)
{
struct smc911x_local *lp = netdev_priv(dev);
int i, retval;
* 0 --> there is a device
* anything else, error
*/
-static int smc911x_drv_probe(struct platform_device *pdev)
+static int __devinit smc911x_drv_probe(struct platform_device *pdev)
{
#ifdef SMC_DYNAMIC_BUS_CONFIG
struct smc911x_platdata *pd = pdev->dev.platform_data;
return ret;
}
-static int smc911x_drv_remove(struct platform_device *pdev)
+static int __devexit smc911x_drv_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct smc911x_local *lp = netdev_priv(ndev);
static struct platform_driver smc911x_driver = {
.probe = smc911x_drv_probe,
- .remove = smc911x_drv_remove,
+ .remove = __devexit_p(smc911x_drv_remove),
.suspend = smc911x_drv_suspend,
.resume = smc911x_drv_resume,
.driver = {
* I just deleted auto_irq.c, since it was never built...
* --jgarzik
*/
-static int __init smc_findirq(struct smc_local *lp)
+static int __devinit smc_findirq(struct smc_local *lp)
{
void __iomem *ioaddr = lp->base;
int timeout = 20;
* o actually GRAB the irq.
* o GRAB the region
*/
-static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
+static int __devinit smc_probe(struct net_device *dev, void __iomem *ioaddr,
unsigned long irq_flags)
{
struct smc_local *lp = netdev_priv(dev);
* 0 --> there is a device
* anything else, error
*/
-static int smc_drv_probe(struct platform_device *pdev)
+static int __devinit smc_drv_probe(struct platform_device *pdev)
{
struct smc91x_platdata *pd = pdev->dev.platform_data;
struct smc_local *lp;
return ret;
}
-static int smc_drv_remove(struct platform_device *pdev)
+static int __devexit smc_drv_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct smc_local *lp = netdev_priv(ndev);
static struct platform_driver smc_driver = {
.probe = smc_drv_probe,
- .remove = smc_drv_remove,
+ .remove = __devexit_p(smc_drv_remove),
.suspend = smc_drv_suspend,
.resume = smc_drv_resume,
.driver = {
return 0;
}
-static struct xenbus_driver netfront = {
+static struct xenbus_driver netfront_driver = {
.name = "vif",
.owner = THIS_MODULE,
.ids = netfront_ids,
printk(KERN_INFO "Initialising Xen virtual ethernet driver.\n");
- return xenbus_register_frontend(&netfront);
+ return xenbus_register_frontend(&netfront_driver);
}
module_init(netif_init);
if (xen_initial_domain())
return;
- xenbus_unregister_driver(&netfront);
+ xenbus_unregister_driver(&netfront_driver);
}
module_exit(netif_exit);
return 0;
}
-static int __devinit pci_setup(char *str)
+static int __init pci_setup(char *str)
{
while (str) {
char *k = strchr(str, ',');
* link, then start recursive peer enumeration. Returns %0 if
* enumeration succeeds or %-EBUSY if enumeration fails.
*/
-int rio_enum_mport(struct rio_mport *mport)
+int __devinit rio_enum_mport(struct rio_mport *mport)
{
struct rio_net *net = NULL;
int rc = 0;
* peer discovery. Returns %0 if discovery succeeds or %-EBUSY
* on failure.
*/
-int rio_disc_mport(struct rio_mport *mport)
+int __devinit rio_disc_mport(struct rio_mport *mport)
{
struct rio_net *net = NULL;
int enum_timeout_flag = 0;
device_initcall(rio_init);
-int rio_init_mports(void)
+int __devinit rio_init_mports(void)
{
int rc = 0;
struct rio_mport *port;
extern int bbc_envctrl_init(struct bbc_i2c_bus *bp);
extern void bbc_envctrl_cleanup(struct bbc_i2c_bus *bp);
-static int __devinit bbc_i2c_probe(struct of_device *op,
+static int __init bbc_i2c_probe(struct of_device *op,
const struct of_device_id *match)
{
struct bbc_i2c_bus *bp;
return err;
}
-static int __devexit bbc_i2c_remove(struct of_device *op)
+static int __exit bbc_i2c_remove(struct of_device *op)
{
struct bbc_i2c_bus *bp = dev_get_drvdata(&op->dev);
.name = "bbc_i2c",
.match_table = bbc_i2c_match,
.probe = bbc_i2c_probe,
- .remove = __devexit_p(bbc_i2c_remove),
+ .remove = __exit_p(bbc_i2c_remove),
};
static int __init bbc_i2c_init(void)
advansys_wide_free_mem(boardp);
free_irq(boardp->irq, shost);
err_free_dma:
+#ifdef CONFIG_ISA
if (shost->dma_channel != NO_ISA_DMA)
free_dma(shost->dma_channel);
+#endif
err_free_proc:
kfree(boardp->prtbuf);
err_unmap:
ASC_DBG(1, "begin\n");
scsi_remove_host(shost);
free_irq(board->irq, shost);
+#ifdef CONFIG_ISA
if (shost->dma_channel != NO_ISA_DMA) {
ASC_DBG(1, "free_dma()\n");
free_dma(shost->dma_channel);
}
+#endif
if (ASC_NARROW_BOARD(board)) {
dma_unmap_single(board->dev,
board->dvc_var.asc_dvc_var.overrun_dma,
.remove = gdth_pci_remove_one,
};
-static void gdth_pci_remove_one(struct pci_dev *pdev)
+static void __devexit gdth_pci_remove_one(struct pci_dev *pdev)
{
gdth_ha_str *ha = pci_get_drvdata(pdev);
pci_disable_device(pdev);
}
-static int gdth_pci_init_one(struct pci_dev *pdev,
+static int __devinit gdth_pci_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
ushort vendor = pdev->vendor;
#endif /* CONFIG_ISA */
#ifdef CONFIG_PCI
-static int gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr,
+static int __devinit gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr,
gdth_ha_str *ha)
{
register gdt6_dpram_str __iomem *dp6_ptr;
/* controller protocol functions */
-static void __init gdth_enable_int(gdth_ha_str *ha)
+static void __devinit gdth_enable_int(gdth_ha_str *ha)
{
ulong flags;
gdt2_dpram_str __iomem *dp2_ptr;
/* search for devices */
-static int __init gdth_search_drives(gdth_ha_str *ha)
+static int __devinit gdth_search_drives(gdth_ha_str *ha)
{
ushort cdev_cnt, i;
int ok;
#endif /* CONFIG_EISA */
#ifdef CONFIG_PCI
-static int gdth_pci_probe_one(gdth_pci_str *pcistr,
+static int __devinit gdth_pci_probe_one(gdth_pci_str *pcistr,
gdth_ha_str **ha_out)
{
struct Scsi_Host *shp;
{ "" }
};
-static struct xenbus_driver xenfb = {
+static struct xenbus_driver xenfb_driver = {
.name = "vfb",
.owner = THIS_MODULE,
.ids = xenfb_ids,
if (xen_initial_domain())
return -ENODEV;
- return xenbus_register_frontend(&xenfb);
+ return xenbus_register_frontend(&xenfb_driver);
}
static void __exit xenfb_cleanup(void)
{
- xenbus_unregister_driver(&xenfb);
+ xenbus_unregister_driver(&xenfb_driver);
}
module_init(xenfb_init);
config W1_MASTER_DS1WM
tristate "Maxim DS1WM 1-wire busmaster"
- depends on W1 && ARM
+ depends on W1 && ARM && HAVE_CLK
help
Say Y here to enable the DS1WM 1-wire driver, such as that
in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
{.info = {"_BFS", 1, 0}},
{.info = {"_BIF", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER,
9,
- ACPI_RTYPE_STRING, 4, 0}}, /* fixed (9 Int),(4 Str) */
+ ACPI_RTYPE_STRING | ACPI_RTYPE_BUFFER, 4, 0}}, /* fixed (9 Int),(4 Str) */
{.info = {"_BLT", 3, 0}},
{.info = {"_BMC", 1, 0}},
{.info = {"_BMD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}}, /* fixed (5 Int) */
/* Acpi 1.0 defined _WAK with no return value. Later, it was changed to return a package */
- {.info = {"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_PACKAGE}},
+ {.info = {"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}},
{.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 2, 0, 0, 0}}, /* fixed (2 Int), but is optional */
{.ret_info = {0, 0, 0, 0, 0, 0}} /* Table terminator */
};
compat_long_t request,
compat_ulong_t addr, compat_ulong_t data);
-#ifdef __ARCH_WANT_COMPAT_SYS_PTRACE
extern long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
compat_ulong_t addr, compat_ulong_t data);
asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid,
compat_long_t addr, compat_long_t data);
-#endif /* __ARCH_WANT_COMPAT_SYS_PTRACE */
/*
* epoll (fs/eventpoll.c) compat bits follow ...
#ifdef CONFIG_MEMORY_HOTPLUG
#define hotplug_memory_notifier(fn, pri) { \
- static struct notifier_block fn##_mem_nb = \
+ static __meminitdata struct notifier_block fn##_mem_nb =\
{ .notifier_call = fn, .priority = pri }; \
register_memory_notifier(&fn##_mem_nb); \
}
struct list_head lru; /* per cgroup LRU list */
};
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat);
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat);
void __init page_cgroup_init(void);
struct page_cgroup *lookup_page_cgroup(struct page *page);
#else /* CONFIG_CGROUP_MEM_RES_CTLR */
struct page_cgroup;
-static inline void pgdat_page_cgroup_init(struct pglist_data *pgdat)
+static inline void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
{
}
* It must be called by the arch code on the new cpu, before the new cpu
* enables interrupts and before the "boot" cpu returns from __cpu_up().
*/
-void notify_cpu_starting(unsigned int cpu)
+void __cpuinit notify_cpu_starting(unsigned int cpu)
{
unsigned long val = CPU_STARTING;
put_cpu();
}
-static int __devinit profile_cpu_callback(struct notifier_block *info,
+static int __cpuinit profile_cpu_callback(struct notifier_block *info,
unsigned long action, void *__cpu)
{
int node, cpu = (unsigned long)__cpu;
#define create_hash_tables() ({ 0; })
#endif
-int create_proc_profile(void)
+int __ref create_proc_profile(void) /* false positive from hotcpu_notifier */
{
struct proc_dir_entry *entry;
return (copied == sizeof(data)) ? 0 : -EIO;
}
-#if defined CONFIG_COMPAT && defined __ARCH_WANT_COMPAT_SYS_PTRACE
+#if defined CONFIG_COMPAT
#include <linux/compat.h>
int compat_ptrace_request(struct task_struct *child, compat_long_t request,
unlock_kernel();
return ret;
}
-#endif /* CONFIG_COMPAT && __ARCH_WANT_COMPAT_SYS_PTRACE */
+#endif /* CONFIG_COMPAT */
pgdat->node_start_pfn;
}
-static int __add_zone(struct zone *zone, unsigned long phys_start_pfn)
+static int __meminit __add_zone(struct zone *zone, unsigned long phys_start_pfn)
{
struct pglist_data *pgdat = zone->zone_pgdat;
int nr_pages = PAGES_PER_SECTION;
return 0;
}
-static int __add_section(struct zone *zone, unsigned long phys_start_pfn)
+static int __meminit __add_section(struct zone *zone, unsigned long phys_start_pfn)
{
int nr_pages = PAGES_PER_SECTION;
int ret;
* call this function after deciding the zone to which to
* add the new pages.
*/
-int __add_pages(struct zone *zone, unsigned long phys_start_pfn,
+int __ref __add_pages(struct zone *zone, unsigned long phys_start_pfn,
unsigned long nr_pages)
{
unsigned long i;
}
-int add_memory(int nid, u64 start, u64 size)
+/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
+int __ref add_memory(int nid, u64 start, u64 size)
{
pg_data_t *pgdat = NULL;
int new_pgdat = 0;
#if !defined(CONFIG_SPARSEMEM)
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat)
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
{
pgdat->node_page_cgroup = NULL;
}
return section->page_cgroup + pfn;
}
-int __meminit init_section_page_cgroup(unsigned long pfn)
+/* __alloc_bootmem...() is protected by !slab_available() */
+int __init_refok init_section_page_cgroup(unsigned long pfn)
{
struct mem_section *section;
struct page_cgroup *base, *pc;
}
}
-int online_page_cgroup(unsigned long start_pfn,
+int __meminit online_page_cgroup(unsigned long start_pfn,
unsigned long nr_pages,
int nid)
{
return -ENOMEM;
}
-int offline_page_cgroup(unsigned long start_pfn,
+int __meminit offline_page_cgroup(unsigned long start_pfn,
unsigned long nr_pages, int nid)
{
unsigned long start, end, pfn;
}
-static int page_cgroup_callback(struct notifier_block *self,
+static int __meminit page_cgroup_callback(struct notifier_block *self,
unsigned long action, void *arg)
{
struct memory_notify *mn = arg;
" want\n");
}
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat)
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
{
return;
}
* set. If this is <=0, then that means that the passed-in
* map was not consumed and must be freed.
*/
-int sparse_add_one_section(struct zone *zone, unsigned long start_pfn,
+int __meminit sparse_add_one_section(struct zone *zone, unsigned long start_pfn,
int nr_pages)
{
unsigned long section_nr = pfn_to_section_nr(start_pfn);
return 0;
}
-static int __devinit cs4231_sbus_probe(struct of_device *op, const struct of_device_id *match)
+static int __init cs4231_sbus_probe(struct of_device *op, const struct of_device_id *match)
{
struct resource *rp = &op->resource[0];
struct snd_card *card;
return 0;
}
-static int __devinit cs4231_ebus_probe(struct of_device *op, const struct of_device_id *match)
+static int __init cs4231_ebus_probe(struct of_device *op, const struct of_device_id *match)
{
struct snd_card *card;
int err;
}
#endif
-static int __devinit cs4231_probe(struct of_device *op, const struct of_device_id *match)
+static int __init cs4231_probe(struct of_device *op, const struct of_device_id *match)
{
#ifdef EBUS_SUPPORT
if (!strcmp(op->node->parent->name, "ebus"))
return -ENODEV;
}
-static int __devexit cs4231_remove(struct of_device *op)
+static int __exit cs4231_remove(struct of_device *op)
{
struct snd_cs4231 *chip = dev_get_drvdata(&op->dev);
.name = "audio",
.match_table = cs4231_match,
.probe = cs4231_probe,
- .remove = __devexit_p(cs4231_remove),
+ .remove = __exit_p(cs4231_remove),
};
static int __init cs4231_init(void)
projects / linux-2.6-omap-h63xx.git / commitdiff