]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
MMC: OMAP: Abort stuck commands
authorJarkko Lavinen <jarkko.lavinen@nokia.com>
Wed, 26 Mar 2008 20:09:29 +0000 (16:09 -0400)
committerPierre Ossman <drzeus@drzeus.cx>
Fri, 18 Apr 2008 18:05:30 +0000 (20:05 +0200)
When a card is removed while it is being accessed, a command can get stuck so
that no timeout or end of command interrupt ever occurs. The command getting
stuck is almost always CDM12, but also the other commands can get stuck. Catch
a stuck command with a timer and try sending the initialization stream until
the controller starts running again and responds with the end of command
status.

Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
drivers/mmc/host/omap.c

index 535499f11e7c2cabbb6cf67ad60bac16f217c78b..a1dfa74c50ab6ab68770ff199fffc5421cde6ced 100644 (file)
@@ -134,6 +134,9 @@ struct mmc_omap_host {
        unsigned char           bus_mode;
        unsigned char           hw_bus_mode;
 
+       struct work_struct      cmd_abort;
+       struct timer_list       cmd_timer;
+
        unsigned int            sg_len;
        int                     sg_idx;
        u16 *                   buffer;
@@ -314,6 +317,8 @@ mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd)
        if (host->data && !(host->data->flags & MMC_DATA_WRITE))
                cmdreg |= 1 << 15;
 
+       mod_timer(&host->cmd_timer, jiffies + HZ/2);
+
        OMAP_MMC_WRITE(host, CTO, 200);
        OMAP_MMC_WRITE(host, ARGL, cmd->arg & 0xffff);
        OMAP_MMC_WRITE(host, ARGH, cmd->arg >> 16);
@@ -372,10 +377,38 @@ mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
        mmc_omap_start_command(host, data->stop);
 }
 
+static void
+mmc_omap_send_abort(struct mmc_omap_host *host)
+{
+       struct mmc_omap_slot *slot = host->current_slot;
+       unsigned int restarts, passes, timeout;
+       u16 stat = 0;
+
+       /* Sending abort takes 80 clocks. Have some extra and round up */
+       timeout = (120*1000000 + slot->fclk_freq - 1)/slot->fclk_freq;
+       restarts = 0;
+       while (restarts < 10000) {
+               OMAP_MMC_WRITE(host, STAT, 0xFFFF);
+               OMAP_MMC_WRITE(host, CMD, (3 << 12) | (1 << 7));
+
+               passes = 0;
+               while (passes < timeout) {
+                       stat = OMAP_MMC_READ(host, STAT);
+                       if (stat & OMAP_MMC_STAT_END_OF_CMD)
+                               goto out;
+                       udelay(1);
+                       passes++;
+               }
+
+               restarts++;
+       }
+out:
+       OMAP_MMC_WRITE(host, STAT, stat);
+}
+
 static void
 mmc_omap_abort_xfer(struct mmc_omap_host *host, struct mmc_data *data)
 {
-       int loops;
        u16 ie;
 
        if (host->dma_in_use)
@@ -386,16 +419,8 @@ mmc_omap_abort_xfer(struct mmc_omap_host *host, struct mmc_data *data)
 
        ie = OMAP_MMC_READ(host, IE);
        OMAP_MMC_WRITE(host, IE, 0);
-       OMAP_MMC_WRITE(host, CMD, 1 << 7);
-       loops = 0;
-       while (!(OMAP_MMC_READ(host, STAT) & OMAP_MMC_STAT_END_OF_CMD)) {
-               udelay(1);
-               loops++;
-               if (loops == 100000)
-                       break;
-       }
-       OMAP_MMC_WRITE(host, STAT, OMAP_MMC_STAT_END_OF_CMD);
        OMAP_MMC_WRITE(host, IE, ie);
+       mmc_omap_send_abort(host);
 }
 
 static void
@@ -451,6 +476,8 @@ mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
 {
        host->cmd = NULL;
 
+       del_timer(&host->cmd_timer);
+
        if (cmd->flags & MMC_RSP_PRESENT) {
                if (cmd->flags & MMC_RSP_136) {
                        /* response type 2 */
@@ -486,6 +513,47 @@ mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
        }
 }
 
+/*
+ * Abort stuck command. Can occur when card is removed while it is being
+ * read.
+ */
+static void mmc_omap_abort_command(struct work_struct *work)
+{
+       struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
+                                                 cmd_abort);
+       u16 ie;
+
+       ie = OMAP_MMC_READ(host, IE);
+       OMAP_MMC_WRITE(host, IE, 0);
+
+       if (!host->cmd) {
+               OMAP_MMC_WRITE(host, IE, ie);
+               return;
+       }
+
+       dev_dbg(mmc_dev(host->mmc), "Aborting stuck command CMD%d\n",
+               host->cmd->opcode);
+
+       if (host->data && host->dma_in_use)
+               mmc_omap_release_dma(host, host->data, 1);
+
+       host->data = NULL;
+       host->sg_len = 0;
+
+       mmc_omap_send_abort(host);
+       host->cmd->error = -ETIMEDOUT;
+       mmc_omap_cmd_done(host, host->cmd);
+       OMAP_MMC_WRITE(host, IE, ie);
+}
+
+static void
+mmc_omap_cmd_timer(unsigned long data)
+{
+       struct mmc_omap_host *host = (struct mmc_omap_host *) data;
+
+       schedule_work(&host->cmd_abort);
+}
+
 /* PIO only */
 static void
 mmc_omap_sg_to_buf(struct mmc_omap_host *host)
@@ -1233,6 +1301,11 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
                goto err_free_mem_region;
        }
 
+       INIT_WORK(&host->cmd_abort, mmc_omap_abort_command);
+       init_timer(&host->cmd_timer);
+       host->cmd_timer.function = mmc_omap_cmd_timer;
+       host->cmd_timer.data = (unsigned long) host;
+
        spin_lock_init(&host->dma_lock);
        init_timer(&host->dma_timer);
        spin_lock_init(&host->slot_lock);