Thomas Graf <tgraf@suug.ch>
Tony Luck <tony.luck@intel.com>
Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
+Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
+Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
- how to execute Mono-based .NET binaries with the help of BINFMT_MISC.
moxa-smartio
- file with info on installing/using Moxa multiport serial driver.
-mtrr.txt
- - how to use PPro Memory Type Range Registers to increase performance.
mutex-design.txt
- info on the generic mutex subsystem.
namespaces/
--- /dev/null
+What: /sys/firmware/sgi_uv/
+Date: August 2008
+Contact: Russ Anderson <rja@sgi.com>
+Description:
+ The /sys/firmware/sgi_uv directory contains information
+ about the SGI UV platform.
+
+ Under that directory are a number of files:
+
+ partition_id
+ coherence_id
+
+ The partition_id entry contains the partition id.
+ SGI UV systems can be partitioned into multiple physical
+ machines, which each partition running a unique copy
+ of the operating system. Each partition will have a unique
+ partition id. To display the partition id, use the command:
+
+ cat /sys/firmware/sgi_uv/partition_id
+
+ The coherence_id entry contains the coherence id.
+ A partitioned SGI UV system can have one or more coherence
+ domain. The coherence id indicates which coherence domain
+ this partition is in. To display the coherence id, use the
+ command:
+
+ cat /sys/firmware/sgi_uv/coherence_id
--- /dev/null
+What: /sys/class/gpio/
+Date: July 2008
+KernelVersion: 2.6.27
+Contact: David Brownell <dbrownell@users.sourceforge.net>
+Description:
+
+ As a Kconfig option, individual GPIO signals may be accessed from
+ userspace. GPIOs are only made available to userspace by an explicit
+ "export" operation. If a given GPIO is not claimed for use by
+ kernel code, it may be exported by userspace (and unexported later).
+ Kernel code may export it for complete or partial access.
+
+ GPIOs are identified as they are inside the kernel, using integers in
+ the range 0..INT_MAX. See Documentation/gpio.txt for more information.
+
+ /sys/class/gpio
+ /export ... asks the kernel to export a GPIO to userspace
+ /unexport ... to return a GPIO to the kernel
+ /gpioN ... for each exported GPIO #N
+ /value ... always readable, writes fail for input GPIOs
+ /direction ... r/w as: in, out (default low); write: high, low
+ /gpiochipN ... for each gpiochip; #N is its first GPIO
+ /base ... (r/o) same as N
+ /label ... (r/o) descriptive, not necessarily unique
+ /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1)
+
dma_addr_t dma_handle;
dma_handle = pci_map_single(pdev, addr, size, direction);
- if (pci_dma_mapping_error(dma_handle)) {
+ if (pci_dma_mapping_error(pdev, dma_handle)) {
/*
* reduce current DMA mapping usage,
* delay and try again later or
When a kernel change causes the interface that the kernel exposes to
userspace to change, it is recommended that you send the information or
a patch to the manual pages explaining the change to the manual pages
-maintainer at mtk.manpages@gmail.com.
+maintainer at mtk.manpages@gmail.com, and CC the list
+linux-api@vger.kernel.org.
Here is a list of files that are in the kernel source tree that are
required reading:
19: All new userspace interfaces are documented in Documentation/ABI/.
See Documentation/ABI/README for more information.
+ Patches that change userspace interfaces should be CCed to
+ linux-api@vger.kernel.org.
20: Check that it all passes `make headers_check'.
There is an exception to the above. If hotplug functionality is used
to remove all the CPUs that are currently assigned to a cpuset,
-then the kernel will automatically update the cpus_allowed of all
-tasks attached to CPUs in that cpuset to allow all CPUs. When memory
-hotplug functionality for removing Memory Nodes is available, a
-similar exception is expected to apply there as well. In general,
-the kernel prefers to violate cpuset placement, over starving a task
-that has had all its allowed CPUs or Memory Nodes taken offline. User
-code should reconfigure cpusets to only refer to online CPUs and Memory
-Nodes when using hotplug to add or remove such resources.
+then all the tasks in that cpuset will be moved to the nearest ancestor
+with non-empty cpus. But the moving of some (or all) tasks might fail if
+cpuset is bound with another cgroup subsystem which has some restrictions
+on task attaching. In this failing case, those tasks will stay
+in the original cpuset, and the kernel will automatically update
+their cpus_allowed to allow all online CPUs. When memory hotplug
+functionality for removing Memory Nodes is available, a similar exception
+is expected to apply there as well. In general, the kernel prefers to
+violate cpuset placement, over starving a task that has had all
+its allowed CPUs or Memory Nodes taken offline.
There is a second exception to the above. GFP_ATOMIC requests are
kernel internal allocations that must be satisfied, immediately.
*.css
*.dvi
*.eps
+*.fw.gen.S
+*.fw
*.gif
*.grep
*.grp
controlled by a kernel/module/sysfs/sysctl parameter.
Who: Krzysztof Piotr Oledzki <ole@ans.pl>
+---------------------------
+
+What: ide-scsi (BLK_DEV_IDESCSI)
+When: 2.6.29
+Why: The 2.6 kernel supports direct writing to ide CD drives, which
+ eliminates the need for ide-scsi. The new method is more
+ efficient in every way.
+Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
void (*kill_sb) (struct super_block *);
locking rules:
may block BKL
-get_sb yes yes
-kill_sb yes yes
+get_sb yes no
+kill_sb yes no
->get_sb() returns error or 0 with locked superblock attached to the vfsmount
(exclusive on ->s_umount).
unlocked_ioctl: no (see below)
compat_ioctl: no
mmap: no
-open: maybe (see below)
+open: no
flush: no
release: no
fsync: no (see below)
aio_fsync: no
-fasync: yes (see below)
+fasync: no
lock: yes
readv: no
writev: no
semaphore. Note some filesystems (i.e. remote ones) provide no
protection for i_size so you will need to use the BKL.
-->open() locking is in-transit: big lock partially moved into the methods.
-The only exception is ->open() in the instances of file_operations that never
-end up in ->i_fop/->proc_fops, i.e. ones that belong to character devices
-(chrdev_open() takes lock before replacing ->f_op and calling the secondary
-method. As soon as we fix the handling of module reference counters all
-instances of ->open() will be called without the BKL.
-
Note: ext2_release() was *the* source of contention on fs-intensive
loads and dropping BKL on ->release() helps to get rid of that (we still
grab BKL for cases when we close a file that had been opened r/w, but that
========
There is plenty of additional information on the linux-ntfs web site
-at http://linux-ntfs.sourceforge.net/
+at http://www.linux-ntfs.org/
The web site has a lot of additional information, such as a comprehensive
FAQ, documentation on the NTFS on-disk format, information on the Linux-NTFS
For Win2k and later dynamic disks, you can for example use the ldminfo utility
which is part of the Linux LDM tools (the latest version at the time of
writing is linux-ldm-0.0.8.tar.bz2). You can download it from:
- http://linux-ntfs.sourceforge.net/downloads.html
+ http://www.linux-ntfs.org/
Simply extract the downloaded archive (tar xvjf linux-ldm-0.0.8.tar.bz2), go
into it (cd linux-ldm-0.0.8) and change to the test directory (cd test). You
will find the precompiled (i386) ldminfo utility there. NOTE: You will not be
"smaps". When enabled, the contents of these files are visible only to
readers that are allowed to ptrace() the given process.
+msgmni
+------
+
+Maximum number of message queue ids on the system.
+This value scales to the amount of lowmem. It is automatically recomputed
+upon memory add/remove or ipc namespace creation/removal.
+When a value is written into this file, msgmni's value becomes fixed, i.e. it
+is not recomputed anymore when one of the above events occurs.
+Use auto_msgmni to change this behavior.
+
+auto_msgmni
+-----------
+
+Enables/Disables automatic recomputing of msgmni upon memory add/remove or
+upon ipc namespace creation/removal (see the msgmni description above).
+Echoing "1" into this file enables msgmni automatic recomputing.
+Echoing "0" turns it off.
+auto_msgmni default value is 1.
+
2.4 /proc/sys/vm - The virtual memory subsystem
-----------------------------------------------
- (bit 1) anonymous shared memory
- (bit 2) file-backed private memory
- (bit 3) file-backed shared memory
+ - (bit 4) ELF header pages in file-backed private memory areas (it is
+ effective only if the bit 2 is cleared)
Note that MMIO pages such as frame buffer are never dumped and vDSO pages
are always dumped regardless of the bitmask status.
usage:
- ioctl(fd, CDROMEJECT, 0);
+ ioctl(fd, CDROMCLOSETRAY, 0);
inputs: none
outputs: none
error returns:
- ENOSYS cd drive not capable of ejecting
+ ENOSYS cd drive not capable of closing the tray
EBUSY other processes are accessing drive, or door is locked
notes:
Range: 0 - 8192
Default: 64
- disable_8254_timer
- enable_8254_timer
- [IA32/X86_64] Disable/Enable interrupt 0 timer routing
- over the 8254 in addition to over the IO-APIC. The
- kernel tries to set a sensible default.
-
hpet= [X86-32,HPET] option to control HPET usage
Format: { enable (default) | disable | force }
disable: disable HPET and use PIT instead
shapers= [NET]
Maximal number of shapers.
+ show_msr= [x86] show boot-time MSR settings
+ Format: { <integer> }
+ Show boot-time (BIOS-initialized) MSR settings.
+ The parameter means the number of CPUs to show,
+ for example 1 means boot CPU only.
+
sim710= [SCSI,HW]
See header of drivers/scsi/sim710.c.
- LCD brightness control
- Volume control
- Fan control and monitoring: fan speed, fan enable/disable
- - Experimental: WAN enable and disable
+ - WAN enable and disable
A compatibility table by model and feature is maintained on the web
site, http://ibm-acpi.sf.net/. I appreciate any success or failure
would be the safest choice, though).
-EXPERIMENTAL: WAN
------------------
+WAN
+---
procfs: /proc/acpi/ibm/wan
sysfs device attribute: wwan_enable (deprecated)
sysfs rfkill class: switch "tpacpi_wwan_sw"
-This feature is marked EXPERIMENTAL because the implementation
-directly accesses hardware registers and may not work as expected. USE
-WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module.
-
This feature shows the presence and current state of a W-WAN (Sierra
Wireless EV-DO) device.
softlockup_thresh:
-This value can be used to lower the softlockup tolerance
-threshold. The default threshold is 10s. If a cpu is locked up
-for 10s, the kernel complains. Valid values are 1-60s.
+This value can be used to lower the softlockup tolerance threshold. The
+default threshold is 60 seconds. If a cpu is locked up for 60 seconds,
+the kernel complains. Valid values are 1-60 seconds. Setting this
+tunable to zero will disable the softlockup detection altogether.
==============================================================
are called in the reverse temporal order they were submitted.
This way no data can be reordered.
+usb_unlink_anchored_urbs()
+--------------------------
+
+This function unlinks all URBs associated with an anchor. The URBs
+are processed in the reverse temporal order they were submitted.
+This is similar to usb_kill_anchored_urbs(), but it will not sleep.
+Therefore no guarantee is made that the URBs have been unlinked when
+the call returns. They may be unlinked later but will be unlinked in
+finite time.
+
usb_wait_anchor_empty_timeout()
-------------------------------
This function waits for all URBs associated with an anchor to finish
or a timeout, whichever comes first. Its return value will tell you
whether the timeout was reached.
+
+
2 -> Hauppauge HVR850 (au0828) [2040:7240]
3 -> DViCO FusionHDTV USB (au0828) [0fe9:d620]
4 -> Hauppauge HVR950Q rev xxF8 (au0828) [2040:7201,2040:7211,2040:7281]
+ 5 -> Hauppauge Woodbury (au0828) [2040:8200]
zc3xx 0471:0326 Philips SPC 300 NC
sonixj 0471:0327 Philips SPC 600 NC
sonixj 0471:0328 Philips SPC 700 NC
-zc3xx 0471:032d Philips spc210nc
-zc3xx 0471:032e Philips spc315nc
-sonixj 0471:0330 Philips SPC 710NC
+zc3xx 0471:032d Philips SPC 210 NC
+zc3xx 0471:032e Philips SPC 315 NC
+sonixj 0471:0330 Philips SPC 710 NC
spca501 0497:c001 Smile International
sunplus 04a5:3003 Benq DC 1300
sunplus 04a5:3008 Benq DC 1500
-sunplus 04a5:300a Benq DC3410
-spca500 04a5:300c Benq DC1016
+sunplus 04a5:300a Benq DC 3410
+spca500 04a5:300c Benq DC 1016
sunplus 04f1:1001 JVC GC A50
spca561 04fc:0561 Flexcam 100
sunplus 04fc:500c Sunplus CA500C
tv8532 0923:010f ICM532 cams
mars 093a:050f Mars-Semi Pc-Camera
pac207 093a:2460 PAC207 Qtec Webcam 100
-pac207 093a:2463 Philips spc200nc pac207
+pac207 093a:2463 Philips SPC 220 NC
pac207 093a:2464 Labtec Webcam 1200
pac207 093a:2468 PAC207
pac207 093a:2470 Genius GF112
-pac207 093a:2471 PAC207 Genius VideoCam ge111
-pac207 093a:2472 PAC207 Genius VideoCam ge110
+pac207 093a:2471 Genius VideoCam ge111
+pac207 093a:2472 Genius VideoCam ge110
pac7311 093a:2600 PAC7311 Typhoon
-pac7311 093a:2601 PAC7311 Phillips SPC610NC
+pac7311 093a:2601 Philips SPC 610 NC
pac7311 093a:2603 PAC7312
-pac7311 093a:2608 PAC7311 Trust WB-3300p
-pac7311 093a:260e PAC7311 Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
-pac7311 093a:260f PAC7311 SnakeCam
+pac7311 093a:2608 Trust WB-3300p
+pac7311 093a:260e Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
+pac7311 093a:260f SnakeCam
pac7311 093a:2621 PAC731x
+pac7311 093a:2624 PAC7302
+pac7311 093a:2626 Labtec 2200
zc3xx 0ac8:0302 Z-star Vimicro zc0302
vc032x 0ac8:0321 Vimicro generic vc0321
vc032x 0ac8:0323 Vimicro Vc0323
sonixj 0c45:60ec SN9C105+MO4000
sonixj 0c45:60fb Surfer NoName
sonixj 0c45:60fc LG-LIC300
+sonixj 0c45:6128 Microdia/Sonix SNP325
sonixj 0c45:612a Avant Camera
sonixj 0c45:612c Typhoon Rasy Cam 1.3MPix
sonixj 0c45:6130 Sonix Pccam
spca561 10fd:7e50 FlyCam Usb 100
zc3xx 10fd:8050 Typhoon Webshot II USB 300k
spca501 1776:501c Arowana 300K CMOS Camera
-t613 17a1:0128 T613/TAS5130A
+t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops
vc032x 17ef:4802 Lenovo Vc0323+MI1310_SOC
pac207 2001:f115 D-Link DSB-C120
spca500 2899:012c Toptro Industrial
--- /dev/null
+00-INDEX
+ - this file
+mtrr.txt
+ - how to use x86 Memory Type Range Registers to increase performance
Field name: start_sys
Type: read
-Offset/size: 0x20c/4
+Offset/size: 0x20c/2
Protocol: 2.00+
The load low segment (0x1000). Obsolete.
The AMD K6-2 (stepping 8 and above) and K6-3 processors have two
MTRRs. These are supported. The AMD Athlon family provide 8 Intel
style MTRRs.
-
+
The Centaur C6 (WinChip) has 8 MCRs, allowing write-combining. These
are supported.
reg01: base=0xfb000000 (4016MB), size= 16MB: write-combining, count=1
reg02: base=0xfb000000 (4016MB), size= 4kB: uncachable, count=1
-Some cards (especially Voodoo Graphics boards) need this 4 kB area
+Some cards (especially Voodoo Graphics boards) need this 4 kB area
excluded from the beginning of the region because it is used for
registers.
ones that will be supported at this time are Write-back, Uncached,
Write-combined and Uncached Minus.
+
+PAT APIs
+--------
+
There are many different APIs in the kernel that allows setting of memory
attributes at the page level. In order to avoid aliasing, these interfaces
should be used thoughtfully. Below is a table of interfaces available,
API | RAM | ACPI,... | Reserved/Holes |
-----------------------|----------|------------|------------------|
| | | |
-ioremap | -- | UC | UC |
+ioremap | -- | UC- | UC- |
| | | |
ioremap_cache | -- | WB | WB |
| | | |
-ioremap_nocache | -- | UC | UC |
+ioremap_nocache | -- | UC- | UC- |
| | | |
ioremap_wc | -- | -- | WC |
| | | |
-set_memory_uc | UC | -- | -- |
+set_memory_uc | UC- | -- | -- |
set_memory_wb | | | |
| | | |
set_memory_wc | WC | -- | -- |
set_memory_wb | | | |
| | | |
-pci sysfs resource | -- | -- | UC |
+pci sysfs resource | -- | -- | UC- |
| | | |
pci sysfs resource_wc | -- | -- | WC |
is IORESOURCE_PREFETCH| | | |
| | | |
-pci proc | -- | -- | UC |
+pci proc | -- | -- | UC- |
!PCIIOC_WRITE_COMBINE | | | |
| | | |
pci proc | -- | -- | WC |
PCIIOC_WRITE_COMBINE | | | |
| | | |
-/dev/mem | -- | UC | UC |
+/dev/mem | -- | WB/WC/UC- | WB/WC/UC- |
read-write | | | |
| | | |
-/dev/mem | -- | UC | UC |
+/dev/mem | -- | UC- | UC- |
mmap SYNC flag | | | |
| | | |
-/dev/mem | -- | WB/WC/UC | WB/WC/UC |
+/dev/mem | -- | WB/WC/UC- | WB/WC/UC- |
mmap !SYNC flag | |(from exist-| (from exist- |
and | | ing alias)| ing alias) |
any alias to this area| | | |
and | | | |
MTRR says WB | | | |
| | | |
-/dev/mem | -- | -- | UC_MINUS |
+/dev/mem | -- | -- | UC- |
mmap !SYNC flag | | | |
no alias to this area | | | |
and | | | |
Drivers should use set_memory_[uc|wc] to set access type for RAM ranges.
+
+PAT debugging
+-------------
+
+With CONFIG_DEBUG_FS enabled, PAT memtype list can be examined by
+
+# mount -t debugfs debugfs /sys/kernel/debug
+# cat /sys/kernel/debug/x86/pat_memtype_list
+PAT memtype list:
+uncached-minus @ 0x7fadf000-0x7fae0000
+uncached-minus @ 0x7fb19000-0x7fb1a000
+uncached-minus @ 0x7fb1a000-0x7fb1b000
+uncached-minus @ 0x7fb1b000-0x7fb1c000
+uncached-minus @ 0x7fb1c000-0x7fb1d000
+uncached-minus @ 0x7fb1d000-0x7fb1e000
+uncached-minus @ 0x7fb1e000-0x7fb25000
+uncached-minus @ 0x7fb25000-0x7fb26000
+uncached-minus @ 0x7fb26000-0x7fb27000
+uncached-minus @ 0x7fb27000-0x7fb28000
+uncached-minus @ 0x7fb28000-0x7fb2e000
+uncached-minus @ 0x7fb2e000-0x7fb2f000
+uncached-minus @ 0x7fb2f000-0x7fb30000
+uncached-minus @ 0x7fb31000-0x7fb32000
+uncached-minus @ 0x80000000-0x90000000
+
+This list shows physical address ranges and various PAT settings used to
+access those physical address ranges.
+
+Another, more verbose way of getting PAT related debug messages is with
+"debugpat" boot parameter. With this parameter, various debug messages are
+printed to dmesg log.
+
apicmaintimer. Useful when your PIT timer is totally
broken.
- disable_8254_timer / enable_8254_timer
- Enable interrupt 0 timer routing over the 8254 in addition to over
- the IO-APIC. The kernel tries to set a sensible default.
-
Early Console
syntax: earlyprintk=vga
S: Maintained
ACPI
-P: Andi Kleen
-M: ak@linux.intel.com
+P: Len Brown
M: lenb@kernel.org
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI WMI DRIVER
-P: Carlos Corbacho
-M: carlos@strangeworlds.co.uk
-L: linux-acpi@vger.kernel.org
-W: http://www.lesswatts.org/projects/acpi/
-S: Maintained
+P: Carlos Corbacho
+M: carlos@strangeworlds.co.uk
+L: linux-acpi@vger.kernel.org
+W: http://www.lesswatts.org/projects/acpi/
+S: Maintained
AD1889 ALSA SOUND DRIVER
-P: Kyle McMartin
-M: kyle@mcmartin.ca
-P: Thibaut Varene
-M: T-Bone@parisc-linux.org
-W: http://wiki.parisc-linux.org/AD1889
-L: linux-parisc@vger.kernel.org
-S: Maintained
+P: Kyle McMartin
+M: kyle@mcmartin.ca
+P: Thibaut Varene
+M: T-Bone@parisc-linux.org
+W: http://wiki.parisc-linux.org/AD1889
+L: linux-parisc@vger.kernel.org
+S: Maintained
ADM1025 HARDWARE MONITOR DRIVER
P: Jean Delvare
W: http://www.canb.auug.org.au/~sfr/
S: Supported
+APPLE BCM5974 MULTITOUCH DRIVER
+P: Henrik Rydberg
+M: rydberg@euromail.se
+L: linux-input@vger.kernel.org
+S: Maintained
+
APPLE SMC DRIVER
P: Nicolas Boichat
M: nicolas@boichat.ch
S: Maintained
ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
-P: Andrew Victor
-M: linux@maxim.org.za
-L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
-W: http://maxim.org.za/at91_26.html
-S: Maintained
+P: Andrew Victor
+M: linux@maxim.org.za
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://maxim.org.za/at91_26.html
+S: Maintained
ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
P: Lennert Buytenhek
S: Maintained
ARM/HP JORNADA 7XX MACHINE SUPPORT
-P: Kristoffer Ericson
-M: kristoffer.ericson@gmail.com
-W: www.jlime.com
-S: Maintained
+P: Kristoffer Ericson
+M: kristoffer.ericson@gmail.com
+W: www.jlime.com
+S: Maintained
ARM/INTEL IOP32X ARM ARCHITECTURE
P: Lennert Buytenhek
M: syrjala@sci.fi
S: Maintained
-ATL1 ETHERNET DRIVER
+ATLX ETHERNET DRIVERS
P: Jay Cliburn
M: jcliburn@gmail.com
P: Chris Snook
M: csnook@redhat.com
+P: Jie Yang
+M: jie.yang@atheros.com
L: atl1-devel@lists.sourceforge.net
W: http://sourceforge.net/projects/atl1
W: http://atl1.sourceforge.net
S: Maintained
CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
-P: Jonathan Corbet
+P: Jonathan Corbet
M: corbet@lwn.net
L: video4linux-list@redhat.com
S: Maintained
S: Maintained
CPUSETS
-P: Paul Jackson
P: Paul Menage
-M: pj@sgi.com
M: menage@google.com
L: linux-kernel@vger.kernel.org
W: http://www.bullopensource.org/cpuset/
M: Eng.Linux@digi.com
L: Eng.Linux@digi.com
W: http://www.digi.com
-S: Orphaned
+S: Orphan
DIRECTORY NOTIFICATION
P: Stephen Rothwell
S: Supported
DOCUMENTATION (/Documentation directory)
-P: Michael Kerrisk
-M: mtk.manpages@gmail.com
-P: Randy Dunlap
-M: rdunlap@xenotime.net
-L: linux-doc@vger.kernel.org
-S: Maintained
+P: Michael Kerrisk
+M: mtk.manpages@gmail.com
+P: Randy Dunlap
+M: rdunlap@xenotime.net
+L: linux-doc@vger.kernel.org
+S: Maintained
DOUBLETALK DRIVER
P: James R. Van Zandt
DVB SUBSYSTEM AND DRIVERS
P: LinuxTV.org Project
M: v4l-dvb-maintainer@linuxtv.org
-L: linux-dvb@linuxtv.org (subscription required)
+L: linux-dvb@linuxtv.org (subscription required)
W: http://linuxtv.org/
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
S: Maintained
EMBEDDED LINUX
P: Paul Gortmaker
M: paul.gortmaker@windriver.com
-P David Woodhouse
+P: David Woodhouse
M: dwmw2@infradead.org
L: linux-embedded@vger.kernel.org
S: Maintained
P: Rik Faith
M: faith@cs.unc.edu
L: linux-scsi@vger.kernel.org
-S: Odd fixes (e.g., new signatures)
+S: Odd Fixes (e.g., new signatures)
GDT SCSI DISK ARRAY CONTROLLER DRIVER
P: Achim Leubner
HARDWARE MONITORING
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
-S: Orphaned
+S: Orphan
HARDWARE RANDOM NUMBER GENERATOR CORE
-S: Orphaned
+S: Orphan
HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
P: Robert Love
I2C/SMBUS STUB DRIVER
P: Mark M. Hoffman
M: mhoffman@lightlink.com
-L: lm-sensors@lm-sensors.org
+L: i2c@lm-sensors.org
S: Maintained
I2C SUBSYSTEM
P: Sean Hefty
M: sean.hefty@intel.com
P: Hal Rosenstock
-M: hal.rosenstock@gmail.com
+M: hal.rosenstock@gmail.com
L: general@lists.openfabrics.org
W: http://www.openib.org/
T: git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
MARVELL YUKON / SYSKONNECT DRIVER
P: Mirko Lindner
-M: mlindner@syskonnect.de
+M: mlindner@syskonnect.de
P: Ralph Roesler
-M: rroesler@syskonnect.de
-W: http://www.syskonnect.com
-S: Supported
+M: rroesler@syskonnect.de
+W: http://www.syskonnect.com
+S: Supported
MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
P: Michael Kerrisk
M: mtk.manpages@gmail.com
-W: http://www.kernel.org/doc/man-pages
-S: Supported
+W: http://www.kernel.org/doc/man-pages
+L: linux-man@vger.kernel.org
+S: Supported
MARVELL LIBERTAS WIRELESS DRIVER
P: Dan Williams
MEGARAID SCSI DRIVERS
P: Neela Syam Kolli
M: megaraidlinux@lsi.com
-S: linux-scsi@vger.kernel.org
+L: linux-scsi@vger.kernel.org
W: http://megaraid.lsilogic.com
S: Maintained
P: David Brownell
M: dbrownell@users.sourceforge.net
L: linux-kernel@vger.kernel.org
-S: Odd fixes
+S: Odd Fixes
MULTISOUND SOUND DRIVER
P: Andrew Veliath
S: Maintained
MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-P: Felipe Balbi
-M: felipe.balbi@nokia.com
-L: linux-usb@vger.kernel.org
-S: Maintained
+P: Felipe Balbi
+M: felipe.balbi@nokia.com
+L: linux-usb@vger.kernel.org
+S: Maintained
MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
P: Andrew Gallatin
S: Supported
NATSEMI ETHERNET DRIVER (DP8381x)
-P: Tim Hockin
+P: Tim Hockin
M: thockin@hockin.org
S: Maintained
M: aia21@cantab.net
L: linux-ntfs-dev@lists.sourceforge.net
L: linux-kernel@vger.kernel.org
-W: http://linux-ntfs.sf.net/
+W: http://www.linux-ntfs.org/
T: git kernel.org:/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
S: Maintained
S: Maintained
OMNIVISION OV7670 SENSOR DRIVER
-P: Jonathan Corbet
+P: Jonathan Corbet
M: corbet@lwn.net
L: video4linux-list@redhat.com
S: Maintained
S: Supported
PCI HOTPLUG CORE
-P: Kristen Carlson Accardi
+P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
S: Supported
P: Eric Paris
M: eparis@parisplace.org
L: linux-kernel@vger.kernel.org (kernel issues)
-L: selinux@tycho.nsa.gov (subscribers-only, general discussion)
+L: selinux@tycho.nsa.gov (subscribers-only, general discussion)
W: http://www.nsa.gov/selinux
S: Supported
SIS 96X I2C/SMBUS DRIVER
P: Mark M. Hoffman
M: mhoffman@lightlink.com
-L: lm-sensors@lm-sensors.org
+L: i2c@lm-sensors.org
S: Maintained
SIS FRAMEBUFFER DRIVER
S: Maintained
SOC-CAMERA V4L2 SUBSYSTEM
-P: Guennadi Liakhovetski
-M: g.liakhovetski@gmx.de
-L: video4linux-list@redhat.com
-S: Maintained
+P: Guennadi Liakhovetski
+M: g.liakhovetski@gmx.de
+L: video4linux-list@redhat.com
+S: Maintained
SOFTWARE RAID (Multiple Disks) SUPPORT
P: Ingo Molnar
SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT
P: Liam Girdwood
-M: liam.girdwood@wolfsonmicro.com
+M: lrg@slimlogic.co.uk
P: Mark Brown
M: broonie@opensource.wolfsonmicro.com
T: git opensource.wolfsonmicro.com/linux-2.6-asoc
L: alsa-devel@alsa-project.org (subscribers-only)
+W: http://alsa-project.org/main/index.php/ASoC
S: Supported
SPI SUBSYSTEM
STARMODE RADIO IP (STRIP) PROTOCOL DRIVER
W: http://mosquitonet.Stanford.EDU/strip.html
-S: Unsupported ?
+S: Orphan
STRADIS MPEG-2 DECODER DRIVER
P: Nathan Laredo
S: Maintained
TI FLASH MEDIA INTERFACE DRIVER
-P: Alex Dubov
-M: oakad@yahoo.com
-S: Maintained
+P: Alex Dubov
+M: oakad@yahoo.com
+S: Maintained
TI OMAP MMC INTERFACE DRIVER
P: Carlos Aguiar, Anderson Briglia and Syed Khasim
-M: linux-omap-open-source@linux.omap.com (subscribers only)
+M: linux-omap@vger.kernel.org
W: http://linux.omap.com
W: http://www.muru.com/linux/omap/
S: Maintained
P: Pete Zaitcev
M: zaitcev@redhat.com
L: linux-kernel@vger.kernel.org
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Supported
USB CDC ETHERNET DRIVER
P: Greg Kroah-Hartman
M: greg@kroah.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
W: http://www.kroah.com/linux-usb/
USB EHCI DRIVER
P: David Brownell
M: dbrownell@users.sourceforge.net
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Odd Fixes
USB ET61X[12]51 DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
USB GADGET/PERIPHERAL SUBSYSTEM
P: David Brownell
M: dbrownell@users.sourceforge.net
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org/gadget
S: Maintained
USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
P: Jiri Kosina
M: jkosina@suse.cz
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
USB ISP116X DRIVER
P: Olav Kongas
M: ok@artecdesign.ee
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB KAWASAKI LSI DRIVER
P: Oliver Neukum
M: oliver@neukum.name
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB MASS STORAGE DRIVER
P: Matthew Dharm
M: mdharm-usb@one-eyed-alien.net
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: usb-storage@lists.one-eyed-alien.net
S: Maintained
W: http://www.one-eyed-alien.net/~mdharm/linux-usb/
USB OHCI DRIVER
P: David Brownell
M: dbrownell@users.sourceforge.net
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Odd Fixes
USB OPTION-CARD DRIVER
P: Matthias Urlichs
M: smurf@smurf.noris.de
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB OV511 DRIVER
P: Mark McClelland
M: mmcclell@bigfoot.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://alpha.dyndns.org/ov511/
S: Maintained
USB PEGASUS DRIVER
P: Petko Manolov
M: petkan@users.sourceforge.net
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: netdev@vger.kernel.org
W: http://pegasus2.sourceforge.net/
S: Maintained
USB PRINTER DRIVER (usblp)
P: Pete Zaitcev
M: zaitcev@redhat.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Supported
USB RTL8150 DRIVER
P: Petko Manolov
M: petkan@users.sourceforge.net
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: netdev@vger.kernel.org
W: http://pegasus2.sourceforge.net/
S: Maintained
USB SE401 DRIVER
P: Jeroen Vreeken
M: pe1rxq@amsat.org
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://www.chello.nl/~j.vreeken/se401/
S: Maintained
USB SERIAL BELKIN F5U103 DRIVER
P: William Greathouse
M: wgreathouse@smva.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB SERIAL CYPRESS M8 DRIVER
P: Lonnie Mendez
M: dignome@gmail.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
W: http://geocities.com/i0xox0i
W: http://firstlight.net/cvs
P: Peter Berger and Al Borchers
M: pberger@brimson.com
M: alborchers@steinerpoint.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB SERIAL DRIVER
P: Greg Kroah-Hartman
M: gregkh@suse.de
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Supported
USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER
P: Gary Brubaker
M: xavyer@ix.netcom.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB SERIAL KEYSPAN DRIVER
P: Greg Kroah-Hartman
M: greg@kroah.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://www.kroah.com/linux/
S: Maintained
USB SERIAL WHITEHEAT DRIVER
P: Support Department
M: support@connecttech.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://www.connecttech.com
S: Supported
USB SN9C1xx DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
USB SUBSYSTEM
P: Greg Kroah-Hartman
M: gregkh@suse.de
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
USB UHCI DRIVER
P: Alan Stern
M: stern@rowland.harvard.edu
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
S: Maintained
USB "USBNET" DRIVER FRAMEWORK
USB VIDEO CLASS
P: Laurent Pinchart
M: laurent.pinchart@skynet.be
-L: linx-uvc-devel@berlios.de
+L: linux-uvc-devel@lists.berlios.de
L: video4linux-list@redhat.com
W: http://linux-uvc.berlios.de
S: Maintained
USB W996[87]CF DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
USB ZC0301 DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://www.linux-projects.org
S: Maintained
USB ZD1201 DRIVER
P: Jeroen Vreeken
M: pe1rxq@amsat.org
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
W: http://linux-lc100020.sourceforge.net
S: Maintained
USB ZR364XX DRIVER
P: Antoine Jacquet
M: royale@zerezo.com
-L: linux-usb@vger.kernel.org
+L: linux-usb@vger.kernel.org
L: video4linux-list@redhat.com
W: http://royale.zerezo.com/zr364xx/
S: Maintained
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 27
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc8
NAME = Rotary Wombat
# *DOCUMENTATION*
UNPREDICTABLE (in fact it can be predicted that it won't work
at all). If in doubt say Y.
+config ARCH_FLATMEM_HAS_HOLES
+ bool
+ default y
+ depends on FLATMEM
+
config ARCH_DISCONTIGMEM_ENABLE
bool
default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Thu Jun 7 04:28:32 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MMU_FWK=y
+CONFIG_OMAP_MBOX_FWK=m
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_LL_DEBUG_LCD is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_OMAP_DSP=m
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
+# CONFIG_OMAP_DSP_FBEXPORT is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+CONFIG_MACH_AMS_DELTA=y
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_168MHZ is not set
+CONFIG_OMAP_ARM_150MHZ=y
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 initrd=0x11c00000,4M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_AMS_DELTA=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_ESP_CORE is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=y
+CONFIG_USB_KAWETH=y
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_AMS_DELTA=y
+# CONFIG_LEDS_OMAP_DEBUG is not set
+# CONFIG_LEDS_OMAP is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_CLEAN_4x6 is not set
+# CONFIG_FONT_CLEAN_5x8 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc8-omap1
+# Fri Jan 18 10:21:06 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_DEBUG_SRAM_PATCH=y
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_BOOT_TAG=y
+CONFIG_OMAP_BOOT_REASON=y
+CONFIG_OMAP_COMPONENT_VERSION=y
+CONFIG_OMAP_GPIO_SWITCH=y
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_STI=y
+CONFIG_OMAP_STI_CONSOLE=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MMU_FWK=y
+CONFIG_OMAP_MBOX_FWK=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+CONFIG_MACH_NOKIA770=y
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+CONFIG_OMAP_ARM_216MHZ=y
+# CONFIG_OMAP_ARM_192MHZ is not set
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 time"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=y
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+CONFIG_BT_HCIBRF6150=y
+# CONFIG_BT_HCIH4P is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+# CONFIG_PROC_EVENTS is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_OMAP_HW=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TSC2102 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+CONFIG_SENSORS_TLV320AIC23=y
+# CONFIG_GPIOEXPANDER_OMAP is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_OMAP=y
+CONFIG_FB_OMAP_LCDC_EXTERNAL=y
+CONFIG_FB_OMAP_LCDC_HWA742=y
+# CONFIG_FB_OMAP_LCDC_BLIZZARD is not set
+CONFIG_FB_OMAP_MANUAL_UPDATE=y
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_DUMMY=y
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_OMAP_AIC23=y
+# CONFIG_SND_OMAP_TSC2101 is not set
+# CONFIG_SND_SX1 is not set
+# CONFIG_SND_OMAP_TSC2102 is not set
+# CONFIG_SND_OMAP24XX_EAC is not set
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=y
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# CBUS support
+#
+CONFIG_CBUS=y
+CONFIG_CBUS_TAHVO=y
+CONFIG_CBUS_TAHVO_USER=y
+CONFIG_CBUS_TAHVO_USB=y
+# CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT is not set
+CONFIG_CBUS_RETU=y
+CONFIG_CBUS_RETU_USER=y
+CONFIG_CBUS_RETU_POWERBUTTON=y
+CONFIG_CBUS_RETU_RTC=y
+CONFIG_CBUS_RETU_WDT=y
+# CONFIG_CBUS_RETU_HEADSET is not set
+CONFIG_OMAP_DSP=y
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+CONFIG_OMAP_DSP_FBEXPORT=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_LOWMEM is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:47:37 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+# CONFIG_OMAP_MUX_WARNINGS is not set
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+# CONFIG_ARCH_OMAP2420 is not set
+CONFIG_ARCH_OMAP2430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+# CONFIG_MACH_OMAP_H4 is not set
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+CONFIG_MACH_OMAP_2430SDP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_OMAP is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TSC2102 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OMAP=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_GPIO=y
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_MENELAUS is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_OMAP24XX is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 243x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP_HS=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 12:07:29 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+# CONFIG_MACH_OMAP_H4 is not set
+CONFIG_MACH_OMAP_APOLLON=y
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+# CONFIG_MACH_OMAP_2430SDP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OMAP2 is not set
+# CONFIG_MTD_ONENAND_OTP is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OMAP=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+# CONFIG_HID is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 12:20:19 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_168MHZ=y
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+# CONFIG_USB_ALI_M5632 is not set
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_OMAP is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 13:01:27 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_DM_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_216MHZ is not set
+CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_OMAP is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 13:02:08 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_DM_TIMER is not set
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_216MHZ is not set
+CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=tty0 console=ttyS2,115200 root=0801"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARTHUR=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_ALI_M5632=y
+# CONFIG_USB_AN2720 is not set
+# CONFIG_USB_BELKIN is not set
+# CONFIG_USB_ARMLINUX is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OMAP=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_LOWMEM is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:44:48 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_USER_NS is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_DSP is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+# CONFIG_MACH_OMAP_H4 is not set
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+# CONFIG_MACH_OMAP_2430SDP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x10C08000
+CONFIG_ZBOOT_ROM_BSS=0x10200000
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_OMAP_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc3
-# Mon Mar 3 03:39:48 2008
+# Linux kernel version: 2.6.25-rc2-omap1
+# Wed Feb 20 17:12:36 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_ARCH_OMAP_OTG=y
CONFIG_ARCH_OMAP1=y
# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
#
# OMAP Feature Selections
#
+CONFIG_OMAP_DEBUG_SRAM_PATCH=y
# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+CONFIG_OMAP_GPIO_SWITCH=y
CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_DEBUG=y
CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
CONFIG_OMAP_MCBSP=y
# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_32K_TIMER_HZ=128
-# CONFIG_OMAP_DM_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
CONFIG_OMAP_LL_DEBUG_UART1=y
# CONFIG_OMAP_LL_DEBUG_UART2 is not set
# CONFIG_OMAP_LL_DEBUG_UART3 is not set
#
# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
# CONFIG_OMAP_ARM_216MHZ is not set
-CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_192MHZ is not set
# CONFIG_OMAP_ARM_168MHZ is not set
# CONFIG_OMAP_ARM_120MHZ is not set
-# CONFIG_OMAP_ARM_60MHZ is not set
+CONFIG_OMAP_ARM_60MHZ=y
# CONFIG_OMAP_ARM_30MHZ is not set
#
CONFIG_CPU_ARM926T=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
+# CONFIG_PREEMPT is not set
CONFIG_HZ=128
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
+# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
CONFIG_ALIGNMENT_TRAP=y
#
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh"
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 rw initrd=0x10600000,8M ramdisk_size=8192"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
# CONFIG_ATAGS_PROC is not set
#
# CPU Frequency scaling
#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ is not set
#
# Floating point emulation
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
#
# Power management options
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+CONFIG_DEBUG_DRIVER=y
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
+CONFIG_ISP1301_OMAP=y
CONFIG_TPS65010=y
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# SPI support
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_TSC2101=y
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_TSC210X is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_OMAP_WATCHDOG is not set
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
#
# Sonics Silicon Backplane
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
#
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_OMAP is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
+# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
#
# Sound
#
-CONFIG_SOUND=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
-# Advanced Linux Sound Architecture
+# USB Input Devices
#
-# CONFIG_SND is not set
+# CONFIG_USB_HID is not set
#
-# Open Sound System
+# USB HID Boot Protocol drivers
#
-CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+# CONFIG_MMC_SPI is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+# CONFIG_OMAP_DSP is not set
#
# File systems
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
#
# Security options
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
# CONFIG_CRYPTO_SEQIV is not set
-CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:44:58 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_DEBUG_DEVICES=y
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+CONFIG_MACH_OMAP_H4=y
+# CONFIG_MACH_OMAP_H4_TUSB is not set
+# CONFIG_MACH_OMAP_H4_OTG is not set
+# CONFIG_MACH_OMAP2_H4_USB1 is not set
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+# CONFIG_MACH_OMAP_2430SDP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=y
+CONFIG_IRCOMM=y
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+CONFIG_OMAP_IR=y
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+CONFIG_GPIOEXPANDER_OMAP=y
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+CONFIG_MENELAUS=y
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:45:02 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_INNOVATOR=y
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_168MHZ=y
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 root=/dev/nfs ip=bootp noinitrd"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+CONFIG_OMAP_PS2=m
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_OMAP is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:45:05 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_DM_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_INNOVATOR=y
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_216MHZ is not set
+CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=tty0 console=ttyS0,115200 initrd=0x10200000,8M root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc3
-# Mon Mar 3 03:35:17 2008
+# Linux kernel version: 2.6.24-rc3-omap1
+# Fri Nov 23 12:24:12 2007
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
#
# System Type
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
#
# TI OMAP Implementations
CONFIG_ARCH_OMAP_OTG=y
CONFIG_ARCH_OMAP1=y
# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
#
# OMAP Feature Selections
#
+CONFIG_OMAP_DEBUG_SRAM_PATCH=y
CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
CONFIG_OMAP_MUX=y
# CONFIG_OMAP_MUX_DEBUG is not set
CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
CONFIG_OMAP_MCBSP=y
# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_32K_TIMER_HZ=128
# CONFIG_OMAP_LL_DEBUG_UART2 is not set
# CONFIG_OMAP_LL_DEBUG_UART3 is not set
CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
#
# OMAP Core Type
#
# OMAP Board Type
#
-CONFIG_MACH_OMAP_INNOVATOR=y
-CONFIG_MACH_OMAP_H2=y
-CONFIG_MACH_OMAP_H3=y
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
CONFIG_MACH_OMAP_OSK=y
# CONFIG_OMAP_OSK_MISTRAL is not set
-CONFIG_MACH_NOKIA770=y
-CONFIG_MACH_OMAP_GENERIC=y
+# CONFIG_MACH_NOKIA770 is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
#
# OMAP CPU Speed
CONFIG_CPU_ARM926T=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT is not set
CONFIG_HZ=128
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
+# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
-# CONFIG_ATAGS_PROC is not set
#
# CPU Frequency scaling
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
#
# Power management options
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
#
# Networking
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
CONFIG_NETDEV_10000=y
#
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
#
# Miscellaneous I2C Chip support
#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_ISP1301_OMAP is not set
CONFIG_TPS65010=y
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
#
# Multimedia devices
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
#
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_OMAP is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
+
+#
+# USB Gadget Support
+#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
#
# File systems
#
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
# CONFIG_SAMPLES is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO is not set
#
# Library routines
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:45:12 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP730=y
+# CONFIG_ARCH_OMAP15XX is not set
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_PERSEUS2=y
+# CONFIG_MACH_OMAP_FSAMPLE is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_195MHZ is not set
+CONFIG_OMAP_ARM_182MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_OMAP=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_OMAP is not set
+CONFIG_FB_VIRTUAL=y
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Mon Jun 2 23:54:48 2008
+# Linux kernel version: 2.6.27-rc4
+# Fri Aug 22 12:38:51 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_MXC is not set
CONFIG_ARCH_ORION5X=y
# CONFIG_ARCH_PNX4008 is not set
CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_TLB_FEROCEON=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
+CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
#
# Multimedia devices
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
#
# USB Host Controller Drivers
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
#
# LED drivers
#
+# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_S35390A=y
+# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
#
# on-CPU RTC drivers
#
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_MV_XOR=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
#
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_ASYNC_CORE=y
CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Sat May 19 11:04:27 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+CONFIG_OMAP_GPIO_SWITCH=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+CONFIG_MACH_OMAP_PALMTE=y
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# ISDN subsystem
+#
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+CONFIG_OMAP_RTC=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=y
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.19-rc3-omap1
+# Sun Oct 29 00:36:12 2006
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+CONFIG_OMAP_LL_DEBUG_UART2=y
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_OMAP_DSP=y
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
+CONFIG_OMAP_DSP_FBEXPORT=y
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+CONFIG_MACH_OMAP_PALMTT=y
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mmcblk0p2 rw init=/init"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+# CONFIG_NETDEVICES is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=320
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TSC2102 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_OMAP_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_TSC2102 is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_OMAP=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+CONFIG_BACKLIGHT_OMAP=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+CONFIG_RTC_DRV_OMAP=y
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# Synchronous Serial Interfaces (SSI)
+#
+# CONFIG_OMAP_UWIRE is not set
+# CONFIG_OMAP_TSC2101 is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Thu Jun 7 05:13:00 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION="-z71"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_LL_DEBUG_LCD is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+CONFIG_MACH_OMAP_PALMZ71=y
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+# CONFIG_NETDEVICES is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=320
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_TSC2046 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_TSC210X is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_OMAP=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Thu Jun 7 05:16:10 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLAB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=1
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+CONFIG_OMAP_GPIO_SWITCH=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MMU_FWK=y
+CONFIG_OMAP_MBOX_FWK=y
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_LCD is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_OMAP_DSP=y
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
+# CONFIG_OMAP_DSP_FBEXPORT is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+CONFIG_MACH_SX1=y
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_168MHZ=y
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+# CONFIG_PROC_EVENTS is not set
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+CONFIG_FB_OMAP_BOOTLOADER_INIT=y
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_CLEAN_4x6 is not set
+# CONFIG_FONT_CLEAN_5x8 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_OMAP_AIC23 is not set
+# CONFIG_SND_OMAP_TSC2101 is not set
+CONFIG_SND_SX1=y
+# CONFIG_SND_OMAP_TSC2102 is not set
+# CONFIG_SND_OMAP24XX_EAC is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=866
+CONFIG_FAT_DEFAULT_IOCHARSET="koi8-r"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+CONFIG_NLS_CODEPAGE_866=y
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1251=y
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+CONFIG_NLS_ISO8859_5=y
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_KOI8_R=y
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#define MT_DEVICE_NONSHARED 1
#define MT_DEVICE_CACHED 2
#define MT_DEVICE_IXP2000 3
+#define MT_DEVICE_WC 4
/*
- * types 4 onwards can be found in asm/mach/map.h and are undefined
+ * types 5 onwards can be found in asm/mach/map.h and are undefined
* for ioremap
*/
#define ioremap(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE)
#define ioremap_nocache(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE)
#define ioremap_cached(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE_CACHED)
+#define ioremap_wc(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE_WC)
#define iounmap(cookie) __iounmap(cookie)
#else
#define ioremap(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE)
#define ioremap_nocache(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE)
#define ioremap_cached(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE_CACHED)
+#define ioremap_wc(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE_WC)
#define iounmap(cookie) __arch_iounmap(cookie)
#endif
unsigned int type;
};
-/* types 0-3 are defined in asm/io.h */
-#define MT_CACHECLEAN 4
-#define MT_MINICLEAN 5
-#define MT_LOW_VECTORS 6
-#define MT_HIGH_VECTORS 7
-#define MT_MEMORY 8
-#define MT_ROM 9
+/* types 0-4 are defined in asm/io.h */
+#define MT_CACHECLEAN 5
+#define MT_MINICLEAN 6
+#define MT_LOW_VECTORS 7
+#define MT_HIGH_VECTORS 8
+#define MT_MEMORY 9
+#define MT_ROM 10
#define MT_NONSHARED_DEVICE MT_DEVICE_NONSHARED
#define MT_IXP2000_DEVICE MT_DEVICE_IXP2000
* The networking and block device layers use this boolean for bounce
* buffer decisions.
*/
-#define PCI_DMA_BUS_IS_PHYS (0)
+#define PCI_DMA_BUS_IS_PHYS (1)
/*
* Whether pci_unmap_{single,page} is a nop depends upon the
case 'D':
case 'k':
case 'c':
- kgdb_contthread = NULL;
-
/*
* Try to read optional parameter, pc unchanged if no parm.
* If this was a compiled breakpoint, we need to move
stmfd sp!, {r4 - r8, lr}
@ for (i = 0; i < 16; i++)
- @ W[i] = be32_to_cpu(in[i]); */
+ @ W[i] = be32_to_cpu(in[i]);
#ifdef __ARMEB__
mov r4, r0
{
u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask;
- if (id < 0)
- return;
-
mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
if (enable)
mdctl |= 0x00000003; /* Enable Module */
} while (sec != CMOS_READ(RTC_SECONDS));
if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- BCD_TO_BIN(sec);
- BCD_TO_BIN(min);
- BCD_TO_BIN(hour);
- BCD_TO_BIN(day);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(year);
+ sec = bcd2bin(sec);
+ min = bcd2bin(min);
+ hour = bcd2bin(hour);
+ day = bcd2bin(day);
+ mon = bcd2bin(mon);
+ year = bcd2bin(year);
}
if ((year += 1900) < 1970)
year += 100;
cmos_minutes = CMOS_READ(RTC_MINUTES);
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
- BCD_TO_BIN(cmos_minutes);
+ cmos_minutes = bcd2bin(cmos_minutes);
/*
* since we're only adjusting minutes and seconds,
if (abs(real_minutes - cmos_minutes) < 30) {
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
- BIN_TO_BCD(real_seconds);
- BIN_TO_BCD(real_minutes);
+ real_seconds = bin2bcd(real_seconds);
+ real_minutes = bin2bcd(real_minutes);
}
CMOS_WRITE(real_seconds,RTC_SECONDS);
CMOS_WRITE(real_minutes,RTC_MINUTES);
};
static struct imxuart_platform_data uart_pdata = {
- .flags = 0,
+ .flags = IMXUART_HAVE_RTSCTS,
};
static struct platform_device *devices[] __initdata = {
#ifdef CONFIG_ARCH_OMAP730
static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
{
+ .phys_base = OMAP730_MCBSP1_BASE,
.virt_base = io_p2v(OMAP730_MCBSP1_BASE),
.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
.ops = &omap1_mcbsp_ops,
},
{
+ .phys_base = OMAP730_MCBSP2_BASE,
.virt_base = io_p2v(OMAP730_MCBSP2_BASE),
.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
#ifdef CONFIG_ARCH_OMAP15XX
static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
{
+ .phys_base = OMAP1510_MCBSP1_BASE,
.virt_base = OMAP1510_MCBSP1_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
.clk_name = "mcbsp_clk",
},
{
+ .phys_base = OMAP1510_MCBSP2_BASE,
.virt_base = io_p2v(OMAP1510_MCBSP2_BASE),
.dma_rx_sync = OMAP_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP_DMA_MCBSP2_TX,
.ops = &omap1_mcbsp_ops,
},
{
+ .phys_base = OMAP1510_MCBSP3_BASE,
.virt_base = OMAP1510_MCBSP3_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
#ifdef CONFIG_ARCH_OMAP16XX
static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
{
+ .phys_base = OMAP1610_MCBSP1_BASE,
.virt_base = OMAP1610_MCBSP1_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
.clk_name = "mcbsp_clk",
},
{
+ .phys_base = OMAP1610_MCBSP2_BASE,
.virt_base = io_p2v(OMAP1610_MCBSP2_BASE),
.dma_rx_sync = OMAP_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP_DMA_MCBSP2_TX,
.ops = &omap1_mcbsp_ops,
},
{
+ .phys_base = OMAP1610_MCBSP3_BASE,
.virt_base = OMAP1610_MCBSP3_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
[1] = {
.start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
.end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
#ifdef CONFIG_ARCH_OMAP24XX
static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
{
+ .phys_base = OMAP24XX_MCBSP1_BASE,
.virt_base = IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
.dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.clk_name = "mcbsp_clk",
},
{
+ .phys_base = OMAP24XX_MCBSP2_BASE,
.virt_base = IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
.dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
#ifdef CONFIG_ARCH_OMAP34XX
static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
{
+ .phys_base = OMAP34XX_MCBSP1_BASE,
.virt_base = IO_ADDRESS(OMAP34XX_MCBSP1_BASE),
.dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX,
.clk_name = "mcbsp_clk",
},
{
+ .phys_base = OMAP34XX_MCBSP2_BASE,
.virt_base = IO_ADDRESS(OMAP34XX_MCBSP2_BASE),
.dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
struct pci_sys_data;
void orion5x_pcie_id(u32 *dev, u32 *rev);
+void orion5x_pci_disable(void);
void orion5x_pci_set_cardbus_mode(void);
int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
static struct i2c_board_info __initdata dns323_i2c_devices[] = {
{
I2C_BOARD_INFO("g760a", 0x3e),
-#if 0
- /* this entry requires the new-style driver model lm75 driver,
- * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */
}, {
- I2C_BOARD_INFO("g751", 0x48),
-#endif
+ I2C_BOARD_INFO("lm75", 0x48),
}, {
I2C_BOARD_INFO("m41t80", 0x68),
},
static int __init kurobox_pro_pci_init(void)
{
- if (machine_is_kurobox_pro())
+ if (machine_is_kurobox_pro()) {
+ orion5x_pci_disable();
pci_common_init(&kurobox_pro_pci);
+ }
return 0;
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+static int orion5x_pci_disabled __initdata;
+
+void __init orion5x_pci_disable(void)
+{
+ orion5x_pci_disabled = 1;
+}
+
void __init orion5x_pci_set_cardbus_mode(void)
{
orion5x_pci_cardbus_mode = 1;
if (nr == 0) {
orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr);
ret = pcie_setup(sys);
- } else if (nr == 1) {
+ } else if (nr == 1 && !orion5x_pci_disabled) {
orion5x_pci_set_bus_nr(sys->busnr);
ret = pci_setup(sys);
}
if (nr == 0) {
bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
- } else if (nr == 1) {
+ } else if (nr == 1 && !orion5x_pci_disabled) {
bus = pci_scan_bus(sys->busnr, &pci_ops, sys);
} else {
bus = NULL;
/*
* PCIe endpoint?
*/
- if (bus < orion5x_pci_local_bus_nr())
+ if (orion5x_pci_disabled || bus < orion5x_pci_local_bus_nr())
return IRQ_ORION5X_PCIE0_INT;
return -1;
/*
* Configure peripherals.
*/
+ orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
+ QNAP_TS209_NOR_BOOT_SIZE);
+ platform_device_register(&qnap_ts209_nor_flash);
+
orion5x_ehci0_init();
orion5x_ehci1_init();
qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
orion5x_i2c_init();
orion5x_sata_init(&qnap_ts209_sata_data);
orion5x_uart0_init();
+ orion5x_uart1_init();
orion5x_xor_init();
- orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
- QNAP_TS209_NOR_BOOT_SIZE);
- platform_device_register(&qnap_ts209_nor_flash);
-
platform_device_register(&qnap_ts209_button_device);
/* Get RTC IRQ and register the chip */
/*
* Configure peripherals.
*/
+ orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
+ QNAP_TS409_NOR_BOOT_SIZE);
+ platform_device_register(&qnap_ts409_nor_flash);
+
orion5x_ehci0_init();
qnap_tsx09_find_mac_addr(QNAP_TS409_NOR_BOOT_BASE +
qnap_ts409_partitions[5].offset,
orion5x_eth_init(&qnap_tsx09_eth_data);
orion5x_i2c_init();
orion5x_uart0_init();
-
- orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
- QNAP_TS409_NOR_BOOT_SIZE);
- platform_device_register(&qnap_ts409_nor_flash);
+ orion5x_uart1_init();
platform_device_register(&qnap_ts409_button_device);
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/pxa2xx-gpio.h>
+#include <mach/i2c.h>
#include <mach/irda.h>
#include <mach/mmc.h>
#include <mach/udc.h>
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&corgi_mci_platform_data);
pxa_set_ficp_info(&corgi_ficp_platform_data);
+ pxa_set_i2c_info(NULL);
platform_scoop_config = &corgi_pcmcia_config;
#include <mach/pxa2xx-gpio.h>
#include <mach/mmc.h>
#include <mach/udc.h>
+#include <mach/i2c.h>
#include <mach/irda.h>
#include <mach/poodle.h>
#include <mach/pxafb.h>
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&poodle_mci_platform_data);
pxa_set_ficp_info(&poodle_ficp_platform_data);
+ pxa_set_i2c_info(NULL);
platform_scoop_config = &poodle_pcmcia_config;
#include <mach/pxa2xx-gpio.h>
#include <mach/pxa27x-udc.h>
#include <mach/reset.h>
+#include <mach/i2c.h>
#include <mach/irda.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
pxa_set_ficp_info(&spitz_ficp_platform_data);
set_pxa_fb_parent(&spitzssp_device.dev);
set_pxa_fb_info(&spitz_pxafb_info);
+ pxa_set_i2c_info(NULL);
}
#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
#include <linux/interrupt.h>
#include <linux/clockchips.h>
#include <linux/sched.h>
+#include <linux/cnt32_to_63.h>
#include <asm/div64.h>
-#include <asm/cnt32_to_63.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <mach/pxa-regs.h>
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
+#include "clock.h"
#include "devices.h"
static unsigned long tosa_pin_config[] = {
.wakeup = 1,
.active_low = 1,
},
+ {
+ .type = EV_SW,
+ .code = SW_HEADPHONE_INSERT,
+ .gpio = TOSA_GPIO_EAR_IN,
+ .desc = "HeadPhone insert",
+ .active_low = 1,
+ .debounce_interval = 300,
+ },
};
static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
pxa_set_i2c_info(NULL);
platform_scoop_config = &tosa_pcmcia_config;
+ clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
}
#define S3C2443_CLKSRC_I2S_EPLLREF3 (3<<14)
#define S3C2443_CLKSRC_I2S_MASK (3<<14)
-#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<8)
-#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<8)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<8)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<8)
-#define S3C2443_CLKSRC_EPLLREF_MASK (3<<8)
+#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<7)
+#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<7)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<7)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<7)
+#define S3C2443_CLKSRC_EPLLREF_MASK (3<<7)
#define S3C2443_CLKSRC_ESYSCLK_EPLL (1<<6)
#define S3C2443_CLKSRC_MSYSCLK_MPLL (1<<4)
#include <mach/bast-map.h>
#include <mach/bast-cpld.h>
+#include "nor-simtec.h"
static void simtec_nor_vpp(struct map_info *map, int vpp)
{
local_irq_restore(flags);
}
-struct physmap_flash_data simtec_nor_pdata = {
+static struct physmap_flash_data simtec_nor_pdata = {
.width = 2,
.set_vpp = simtec_nor_vpp,
.nr_parts = 0,
}
static struct s3c2410_spigpio_info jive_lcd_spi = {
- .bus_num = 0,
+ .bus_num = 1,
.pin_clk = S3C2410_GPG8,
.pin_mosi = S3C2410_GPB8,
.chip_select = jive_lcd_spi_chipselect,
#include <linux/ioport.h>
#include <linux/sched.h> /* just for sched_clock() - funny that */
#include <linux/platform_device.h>
+#include <linux/cnt32_to_63.h>
#include <asm/div64.h>
-#include <asm/cnt32_to_63.h>
#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/pgtable.h>
/*
* arch/arm/mach-sa1100/include/mach/jornada720.h
*
- * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728
+ * SSP/MCU communication definitions for HP Jornada 710/720/728
*
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
- * Copyright (C) 2000 John Ankcorn <jca@lcs.mit.edu>
+ * Copyright 2007,2008 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
+ * Copyright 2000 John Ankcorn <jca@lcs.mit.edu>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#define PWMOFF 0xDF
#define TXDUMMY 0x11
#define ERRORCODE 0x00
+
+extern void jornada_ssp_start(void);
+extern void jornada_ssp_end(void);
+extern int jornada_ssp_inout(u8 byte);
+extern int jornada_ssp_byte(u8 byte);
#include <linux/slab.h>
#include <mach/hardware.h>
-#include <asm/hardware/ssp.h>
#include <mach/jornada720.h>
+#include <asm/hardware/ssp.h>
static DEFINE_SPINLOCK(jornada_ssp_lock);
static unsigned long jornada_ssp_flags;
* jornada_ssp_start - enable mcu
*
*/
-int jornada_ssp_start()
+void jornada_ssp_start(void)
{
spin_lock_irqsave(&jornada_ssp_lock, jornada_ssp_flags);
GPCR = GPIO_GPIO25;
udelay(50);
- return 0;
+ return;
};
EXPORT_SYMBOL(jornada_ssp_start);
* jornada_ssp_end - disable mcu and turn off lock
*
*/
-int jornada_ssp_end()
+void jornada_ssp_end(void)
{
GPSR = GPIO_GPIO25;
spin_unlock_irqrestore(&jornada_ssp_lock, jornada_ssp_flags);
- return 0;
+ return;
};
EXPORT_SYMBOL(jornada_ssp_end);
#include <linux/amba/clcd.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
+#include <linux/cnt32_to_63.h>
-#include <asm/cnt32_to_63.h>
#include <asm/system.h>
#include <mach/hardware.h>
#include <asm/io.h>
PMD_SECT_TEX(1),
.domain = DOMAIN_IO,
},
+ [MT_DEVICE_WC] = { /* ioremap_wc */
+ .prot_pte = PROT_PTE_DEVICE,
+ .prot_l1 = PMD_TYPE_TABLE,
+ .prot_sect = PROT_SECT_DEVICE,
+ .domain = DOMAIN_IO,
+ },
[MT_CACHECLEAN] = {
.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
.domain = DOMAIN_KERNEL,
ecc_mask = 0;
}
+ /*
+ * On non-Xscale3 ARMv5-and-older systems, use CB=01
+ * (Uncached/Buffered) for ioremap_wc() mappings. On XScale3
+ * and ARMv6+, use TEXCB=00100 mappings (Inner/Outer Uncacheable
+ * in xsc3 parlance, Uncached Normal in ARMv6 parlance).
+ */
+ if (cpu_is_xsc3() || cpu_arch >= CPU_ARCH_ARMv6) {
+ mem_types[MT_DEVICE_WC].prot_pte_ext |= PTE_EXT_TEX(1);
+ mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
+ } else {
+ mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_BUFFERABLE;
+ mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
+ }
+
/*
* ARMv5 and lower, bit 4 must be set for page tables.
* (was: cache "update-able on write" bit on ARM610)
#include <linux/proc_fs.h>
#include <linux/semaphore.h>
#include <linux/string.h>
-#include <linux/version.h>
#include <mach/clock.h>
#include <mach/tc.h>
#include <mach/board.h>
+#include <mach/mmc.h>
#include <mach/mux.h>
#include <mach/gpio.h>
#include <mach/menelaus.h>
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+ defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-#ifdef CONFIG_ARCH_OMAP24XX
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#define OMAP_MMC1_BASE 0x4809c000
-#define OMAP_MMC1_INT INT_24XX_MMC_IRQ
+#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x1fc)
+#define OMAP_MMC1_INT INT_24XX_MMC_IRQ
+
+#define OMAP_MMC2_BASE 0x480b4000
+#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x1fc)
+#define OMAP_MMC2_INT INT_24XX_MMC2_IRQ
+
#else
+
#define OMAP_MMC1_BASE 0xfffb7800
+#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x7f)
#define OMAP_MMC1_INT INT_MMC
-#endif
+
#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */
+#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x7f)
+#define OMAP_MMC2_INT INT_1610_MMC2
+
+#endif
-static struct omap_mmc_conf mmc1_conf;
+static struct omap_mmc_platform_data mmc1_data;
static u64 mmc1_dmamask = 0xffffffff;
static struct resource mmc1_resources[] = {
{
.start = OMAP_MMC1_BASE,
- .end = OMAP_MMC1_BASE + 0x7f,
+ .end = OMAP_MMC1_END,
.flags = IORESOURCE_MEM,
},
{
.id = 1,
.dev = {
.dma_mask = &mmc1_dmamask,
- .platform_data = &mmc1_conf,
+ .platform_data = &mmc1_data,
},
.num_resources = ARRAY_SIZE(mmc1_resources),
.resource = mmc1_resources,
};
-#ifdef CONFIG_ARCH_OMAP16XX
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+ defined(CONFIG_ARCH_OMAP34XX)
-static struct omap_mmc_conf mmc2_conf;
+static struct omap_mmc_platform_data mmc2_data;
static u64 mmc2_dmamask = 0xffffffff;
static struct resource mmc2_resources[] = {
{
.start = OMAP_MMC2_BASE,
- .end = OMAP_MMC2_BASE + 0x7f,
+ .end = OMAP_MMC2_END,
.flags = IORESOURCE_MEM,
},
{
- .start = INT_1610_MMC2,
+ .start = OMAP_MMC2_INT,
.flags = IORESOURCE_IRQ,
},
};
.id = 2,
.dev = {
.dma_mask = &mmc2_dmamask,
- .platform_data = &mmc2_conf,
+ .platform_data = &mmc2_data,
},
.num_resources = ARRAY_SIZE(mmc2_resources),
.resource = mmc2_resources,
};
#endif
-static void __init omap_init_mmc(void)
+static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf)
{
- const struct omap_mmc_config *mmc_conf;
- const struct omap_mmc_conf *mmc;
-
- /* NOTE: assumes MMC was never (wrongly) enabled */
- mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
- if (!mmc_conf)
+ if (cpu_is_omap2430() || cpu_is_omap34xx())
return;
- /* block 1 is always available and has just one pinout option */
- mmc = &mmc_conf->mmc[0];
- if (mmc->enabled) {
+ if (mmc_conf->mmc[0].enabled) {
if (cpu_is_omap24xx()) {
omap_cfg_reg(H18_24XX_MMC_CMD);
omap_cfg_reg(H15_24XX_MMC_CLKI);
omap_cfg_reg(P20_1710_MMC_DATDIR0);
}
}
- if (mmc->wire4) {
+ if (mmc_conf->mmc[0].wire4) {
if (cpu_is_omap24xx()) {
omap_cfg_reg(H14_24XX_MMC_DAT1);
omap_cfg_reg(E19_24XX_MMC_DAT2);
} else {
omap_cfg_reg(MMC_DAT1);
/* NOTE: DAT2 can be on W10 (here) or M15 */
- if (!mmc->nomux)
+ if (!mmc_conf->mmc[0].nomux)
omap_cfg_reg(MMC_DAT2);
omap_cfg_reg(MMC_DAT3);
}
}
- mmc1_conf = *mmc;
- (void) platform_device_register(&mmc_omap_device1);
}
#ifdef CONFIG_ARCH_OMAP16XX
/* block 2 is on newer chips, and has many pinout options */
- mmc = &mmc_conf->mmc[1];
- if (mmc->enabled) {
- if (!mmc->nomux) {
+ if (mmc_conf->mmc[1].enabled) {
+ if (!mmc_conf->mmc[1].nomux) {
omap_cfg_reg(Y8_1610_MMC2_CMD);
omap_cfg_reg(Y10_1610_MMC2_CLK);
omap_cfg_reg(R18_1610_MMC2_CLKIN);
omap_cfg_reg(W8_1610_MMC2_DAT0);
- if (mmc->wire4) {
+ if (mmc_conf->mmc[1].wire4) {
omap_cfg_reg(V8_1610_MMC2_DAT1);
omap_cfg_reg(W15_1610_MMC2_DAT2);
omap_cfg_reg(R10_1610_MMC2_DAT3);
if (cpu_is_omap1710())
omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
MOD_CONF_CTRL_1);
- mmc2_conf = *mmc;
+ }
+#endif
+}
+
+static void __init omap_init_mmc(void)
+{
+ const struct omap_mmc_config *mmc_conf;
+
+ /* NOTE: assumes MMC was never (wrongly) enabled */
+ mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
+ if (!mmc_conf)
+ return;
+
+ omap_init_mmc_conf(mmc_conf);
+
+ if (mmc_conf->mmc[0].enabled) {
+ mmc1_data.conf = mmc_conf->mmc[0];
+ (void) platform_device_register(&mmc_omap_device1);
+ }
+
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+ defined(CONFIG_ARCH_OMAP34XX)
+ if (mmc_conf->mmc[1].enabled) {
+ mmc2_data.conf = mmc_conf->mmc[1];
(void) platform_device_register(&mmc_omap_device2);
}
#endif
- return;
}
+
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info)
+{
+ switch (host) {
+ case 1:
+ mmc1_data = *info;
+ break;
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+ defined(CONFIG_ARCH_OMAP34XX)
+ case 2:
+ mmc2_data = *info;
+ break;
+#endif
+ default:
+ BUG();
+ }
+}
+
#else
static inline void omap_init_mmc(void) {}
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) {}
#endif
/*-------------------------------------------------------------------------*/
bank->chip.set = gpio_set;
if (bank_is_mpuio(bank)) {
bank->chip.label = "mpuio";
-#ifdef CONFIG_ARCH_OMAP1
+#ifdef CONFIG_ARCH_OMAP16XX
bank->chip.dev = &omap_mpuio_device.dev;
#endif
bank->chip.base = OMAP_MPUIO(0);
};
struct omap_mcbsp_platform_data {
+ unsigned long phys_base;
u32 virt_base;
u8 dma_rx_sync, dma_tx_sync;
u16 rx_irq, tx_irq;
struct omap_mcbsp {
struct device *dev;
+ unsigned long phys_base;
u32 io_base;
u8 id;
u8 free;
omap_set_dma_dest_params(mcbsp[id].dma_tx_lch,
src_port,
OMAP_DMA_AMODE_CONSTANT,
- mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1,
+ mcbsp[id].phys_base + OMAP_MCBSP_REG_DXR1,
0, 0);
omap_set_dma_src_params(mcbsp[id].dma_tx_lch,
omap_set_dma_src_params(mcbsp[id].dma_rx_lch,
src_port,
OMAP_DMA_AMODE_CONSTANT,
- mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1,
+ mcbsp[id].phys_base + OMAP_MCBSP_REG_DRR1,
0, 0);
omap_set_dma_dest_params(mcbsp[id].dma_rx_lch,
mcbsp[id].dma_tx_lch = -1;
mcbsp[id].dma_rx_lch = -1;
+ mcbsp[id].phys_base = pdata->phys_base;
mcbsp[id].io_base = pdata->virt_base;
/* Default I/O is IRQ based */
mcbsp[id].io_type = OMAP_MCBSP_IRQ_IO;
* drivers themsevles.
*/
-int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+static int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
{
struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
void __iomem *base = ourchip->base;
return 0;
}
-int s3c24xx_gpiolib_output(struct gpio_chip *chip,
+static int s3c24xx_gpiolib_output(struct gpio_chip *chip,
unsigned offset, int value)
{
struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
return 0;
}
-void s3c24xx_gpiolib_set(struct gpio_chip *chip, unsigned offset, int value)
+static void s3c24xx_gpiolib_set(struct gpio_chip *chip,
+ unsigned offset, int value)
{
struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
void __iomem *base = ourchip->base;
local_irq_restore(flags);
}
-int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+static int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset)
{
struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
unsigned long val;
return 0;
}
-
-struct s3c24xx_gpio_chip gpios[] = {
+static struct s3c24xx_gpio_chip gpios[] = {
[0] = {
.base = S3C24XX_GPIO_BASE(S3C2410_GPA0),
.chip = {
/* TODO - add set rate calls. */
-struct clk clk_timer_scaler[] = {
+static struct clk clk_timer_scaler[] = {
[0] = {
.name = "pwm-scaler0",
.id = -1,
},
};
-struct clk clk_timer_tclk[] = {
+static struct clk clk_timer_tclk[] = {
[0] = {
.name = "pwm-tclk0",
.id = -1,
return 0;
}
-struct pwm_tdiv_clk clk_timer_tdiv[] = {
+static struct pwm_tdiv_clk clk_timer_tdiv[] = {
[0] = {
.clk = {
.name = "pwm-tdiv",
#include <linux/io.h>
#include <linux/pwm.h>
+#include <asm/plat-s3c24xx/devs.h>
#include <asm/plat-s3c/regs-timer.h>
struct pwm_device {
unsigned char pwm_id;
};
-#define pwm_dbg(_pwm, msg...) dev_info(&(_pwm)->pdev->dev, msg)
+#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
static struct clk *clk_scaler[2];
EXPORT_SYMBOL(pwm_disable);
-unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
+static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
{
unsigned long tin_parent_rate;
unsigned int div;
#ifdef CONFIG_BOARD_ATSTK100X_SPI1
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
-#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
at32_add_device_mci(0, MCI_PDATA);
#endif
#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
--- /dev/null
+uImage
+uImage.srec
+vmlinux.cso
+sfdwarf.log
--- /dev/null
+vmlinux.lds
* to extract and format the required data.
*/
+#include <linux/mm.h>
+#include <linux/sched.h>
#include <linux/thread_info.h>
#include <linux/kbuild.h>
OFFSET(TI_rar_saved, thread_info, rar_saved);
OFFSET(TI_rsr_saved, thread_info, rsr_saved);
OFFSET(TI_restart_block, thread_info, restart_block);
+ BLANK();
+ OFFSET(TSK_active_mm, task_struct, active_mm);
+ BLANK();
+ OFFSET(MM_pgd, mm_struct, pgd);
}
EXPORT_SYMBOL(find_next_zero_bit);
EXPORT_SYMBOL(find_first_bit);
EXPORT_SYMBOL(find_next_bit);
+EXPORT_SYMBOL(generic_find_next_le_bit);
EXPORT_SYMBOL(generic_find_next_zero_le_bit);
/* I/O primitives (lib/io-*.S) */
/* Low-level exception handlers */
handle_critical:
+ /*
+ * AT32AP700x errata:
+ *
+ * After a Java stack overflow or underflow trap, any CPU
+ * memory access may cause erratic behavior. This will happen
+ * when the four least significant bits of the JOSP system
+ * register contains any value between 9 and 15 (inclusive).
+ *
+ * Possible workarounds:
+ * - Don't use the Java Extension Module
+ * - Ensure that the stack overflow and underflow trap
+ * handlers do not do any memory access or trigger any
+ * exceptions before the overflow/underflow condition is
+ * cleared (by incrementing or decrementing the JOSP)
+ * - Make sure that JOSP does not contain any problematic
+ * value before doing any exception or interrupt
+ * processing.
+ * - Set up a critical exception handler which writes a
+ * known-to-be-safe value, e.g. 4, to JOSP before doing
+ * any further processing.
+ *
+ * We'll use the last workaround for now since we cannot
+ * guarantee that user space processes don't use Java mode.
+ * Non-well-behaving userland will be terminated with extreme
+ * prejudice.
+ */
+#ifdef CONFIG_CPU_AT32AP700X
+ /*
+ * There's a chance we can't touch memory, so temporarily
+ * borrow PTBR to save the stack pointer while we fix things
+ * up...
+ */
+ mtsr SYSREG_PTBR, sp
+ mov sp, 4
+ mtsr SYSREG_JOSP, sp
+ mfsr sp, SYSREG_PTBR
+ sub pc, -2
+
+ /* Push most of pt_regs on stack. We'll do the rest later */
sub sp, 4
- stmts --sp, r0-lr
- rcall save_full_context_ex
+ pushm r0-r12
+
+ /* PTBR mirrors current_thread_info()->task->active_mm->pgd */
+ get_thread_info r0
+ ld.w r1, r0[TI_task]
+ ld.w r2, r1[TSK_active_mm]
+ ld.w r3, r2[MM_pgd]
+ mtsr SYSREG_PTBR, r3
+#else
+ sub sp, 4
+ pushm r0-r12
+#endif
+ sub r0, sp, -(14 * 4)
+ mov r1, lr
+ mfsr r2, SYSREG_RAR_EX
+ mfsr r3, SYSREG_RSR_EX
+ pushm r0-r3
+
mfsr r12, SYSREG_ECR
mov r11, sp
rcall do_critical_exception
rcall sys_epoll_pwait
sub sp, -4
popm pc
+
+ .global __sys_sync_file_range
+ .type __sys_sync_file_range,@function
+__sys_sync_file_range:
+ pushm lr
+ st.w --sp, ARG6
+ rcall sys_sync_file_range
+ sub sp, -4
+ popm pc
.long sys_set_robust_list
.long sys_get_robust_list /* 260 */
.long __sys_splice
- .long sys_sync_file_range
+ .long __sys_sync_file_range
.long sys_tee
.long sys_vmsplice
.long __sys_epoll_pwait /* 265 */
switch (ret) {
case NOTIFY_OK:
case NOTIFY_STOP:
- return;
+ break;
case NOTIFY_BAD:
die("Fatal Non-Maskable Interrupt", regs, SIGINT);
default:
+ printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
+ nmi_disable();
break;
}
-
- printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
- nmi_disable();
+ nmi_exit();
}
asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
brgt 1b
retal r11
+ENTRY(generic_find_next_le_bit)
+ lsr r8, r10, 5
+ sub r9, r11, r10
+ retle r11
+
+ lsl r8, 2
+ add r12, r8
+ andl r10, 31, COH
+ breq 1f
+
+ /* offset is not word-aligned. Handle the first (32 - r10) bits */
+ ldswp.w r8, r12[0]
+ sub r12, -4
+ lsr r8, r8, r10
+ brne .L_found
+
+ /* r9 = r9 - (32 - r10) = r9 + r10 - 32 */
+ add r9, r10
+ sub r9, 32
+ retle r11
+
+ /* Main loop. offset must be word-aligned */
+1: ldswp.w r8, r12[0]
+ cp.w r8, 0
+ brne .L_found
+ sub r12, -4
+ sub r9, 32
+ brgt 1b
+ retal r11
+
ENTRY(generic_find_next_zero_le_bit)
lsr r8, r10, 5
sub r9, r11, r10
mov r11, SDRAMC_LPR_LPCB_SELF_RFR
bfins r10, r11, 0, 2 /* LPCB <- self Refresh */
sync 0 /* flush write buffer */
- st.w r12[SDRAMC_LPR], r11 /* put SDRAM in self-refresh mode */
+ st.w r12[SDRAMC_LPR], r10 /* put SDRAM in self-refresh mode */
ld.w r11, r12[SDRAMC_LPR]
unmask_interrupts
sleep CPU_SLEEP_FROZEN
config PCI
bool "PCI support"
+ depends on BROKEN
help
Support for PCI bus.
drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/
+machdirs := $(patsubst %,arch/blackfin/mach-%/, $(machine-y))
+KBUILD_CFLAGS += -Iarch/$(ARCH)/include/
+KBUILD_CFLAGS += -Iarch/$(ARCH)/mach-$(MACHINE)/include
-# Update machine arch symlinks if something which affects
-# them changed. We use .mach to indicate when they were updated
-# last, otherwise make uses the target directory mtime.
-
- show_mach_symlink = :
- quiet_show_mach_symlink = echo ' SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach'
-silent_show_mach_symlink = :
-include/asm-blackfin/.mach: $(wildcard include/config/arch/*.h) include/config/auto.conf
- @$($(quiet)show_mach_symlink)
-ifneq ($(KBUILD_SRC),)
- $(Q)mkdir -p include/asm-$(ARCH)
- $(Q)ln -fsn $(srctree)/include/asm-$(ARCH)/mach-$(MACHINE) include/asm-$(ARCH)/mach
-else
- $(Q)ln -fsn mach-$(MACHINE) include/asm-$(ARCH)/mach
-endif
- @touch $@
+KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs))
CLEAN_FILES += \
- include/asm-$(ARCH)/asm-offsets.h \
+ arch/$(ARCH)/include/asm/asm-offsets.h \
arch/$(ARCH)/kernel/asm-offsets.s \
- include/asm-$(ARCH)/mach \
- include/asm-$(ARCH)/.mach
-archprepare: include/asm-blackfin/.mach
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
-
INSTALL_PATH ?= /tftpboot
boot := arch/$(ARCH)/boot
BOOT_TARGETS = vmImage
#define HI(con32) (((con32) >> 16) & 0xFFFF)
#define hi(con32) (((con32) >> 16) & 0xFFFF)
-#include <asm/mach/anomaly.h>
+#include <mach/anomaly.h>
#ifndef __ASSEMBLY__
#endif /* __ASSEMBLY__ */
-#include <asm/mach/blackfin.h>
+#include <mach/blackfin.h>
#include <asm/bfin-global.h>
#endif /* _BLACKFIN_H_ */
#warning cdef_LPBlackfin.h should only be included for 532 compatible chips.
#endif
*/
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
/*Cache & SRAM Memory*/
#define bfin_read_SRAM_BASE_ADDRESS() bfin_read32(SRAM_BASE_ADDRESS)
#define _CPLB_H
#include <asm/blackfin.h>
-#include <asm/mach/anomaly.h>
+#include <mach/anomaly.h>
#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO)
#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK)
#ifndef _DEF_LPBLACKFIN_H
#define _DEF_LPBLACKFIN_H
-#include <asm/mach/anomaly.h>
+#include <mach/anomaly.h>
#define MK_BMSK_(x) (1<<x)
#ifndef __ASM_DELAY_H__
#define __ASM_DELAY_H__
-#include <asm/mach/anomaly.h>
+#include <mach/anomaly.h>
static inline void __delay(unsigned long loops)
{
#include <asm/signal.h>
#include <linux/kernel.h>
-#include <asm/mach/dma.h>
+#include <mach/dma.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <asm/blackfin.h>
#endif
#ifdef BF548_FAMILY
-#include <asm-blackfin/mach-bf548/gpio.h>
+#include <mach/gpio.h>
#endif
#ifdef BF561_FAMILY
#ifndef _BFIN_IRQ_H_
#define _BFIN_IRQ_H_
-#include <asm/mach/irq.h>
+#include <mach/irq.h>
#include <asm/ptrace.h>
/*******************************************************************************
* interrupts apart (just the TX/RX for the various devices)
*******************************************************************************/
-/* SYS_IRQS and NR_IRQS are defined in <asm/mach-bf5xx/irq.h>*/
+/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h>*/
/*
* Machine specific interrupt sources.
#ifndef _MEM_MAP_H_
#define _MEM_MAP_H_
-#include <asm/mach/mem_map.h>
+#include <mach/mem_map.h>
#endif /* _MEM_MAP_H_ */
static inline void update_protections(struct mm_struct *mm)
{
- flush_switched_cplbs();
- set_mask_dcplbs(mm->context.page_rwx_mask);
+ if (mm->context.page_rwx_mask == current_rwx_mask) {
+ flush_switched_cplbs();
+ set_mask_dcplbs(mm->context.page_rwx_mask);
+ }
}
#endif
#include <asm-generic/4level-fixup.h>
#include <asm/page.h>
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
typedef pte_t *pte_addr_t;
/*
void peripheral_free_list(const unsigned short per[]);
#include <asm/gpio.h>
-#include <asm/mach/portmux.h>
+#include <mach/portmux.h>
#ifndef P_SPORT2_TFS
#define P_SPORT2_TFS P_UNDEF
#include <linux/linkage.h>
#include <linux/compiler.h>
-#include <asm/mach/anomaly.h>
+#include <mach/anomaly.h>
/*
* Interrupt configuring macros.
#include <asm/errno.h>
#include <asm/asm-offsets.h>
-#include <asm/mach-common/context.S>
+#include <asm/context.S>
#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
.section .l1.text
#include <linux/init.h>
#include <asm/blackfin.h>
#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
#endif
.section .l1.text
#include "defBF522.h"
/* include core specific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF522 */
#include "defBF525.h"
/* include core specific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */
#include "defBF527.h"
/* include core specific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */
#include "defBF52x_base.h"
/* Include core specific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
/* ==== begin from cdefBF534.h ==== */
#define _DEF_BF522_H
/* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF522 */
#define _DEF_BF525_H
/* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */
#define _DEF_BF527_H
/* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */
#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */
#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */
#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */
-#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */
+#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */
#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */
#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */
/* PLL_DIV Macros */
#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
-/* VR_CTL Masks */
-#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */
+/* VR_CTL Masks */
+#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */
#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
-#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
-#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
-#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
-
-#define GAIN 0x000C /* Voltage Level Gain */
-#define GAIN_5 0x0000 /* GAIN = 5 */
-#define GAIN_10 0x0004 /* GAIN = 10 */
-#define GAIN_20 0x0008 /* GAIN = 20 */
-#define GAIN_50 0x000C /* GAIN = 50 */
#define VLEV 0x00F0 /* Internal Voltage Level */
#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
-#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */
+#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */
#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */
#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */
#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */
#define IRQ_ERROR1 0x00000002 /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */
#define IRQ_ERROR2 0x00000004 /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */
-#define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */
-#define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */
-#define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */
+#define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */
+#define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */
+#define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */
#define IRQ_DMA4 0x00000040 /* DMA Channel 4 (SPORT0 TX) Interrupt */
#define IRQ_DMA5 0x00000080 /* DMA Channel 5 (SPORT1 RX) Interrupt */
#define IRQ_DMA6 0x00000100 /* DMA Channel 6 (SPORT1 TX) Interrupt */
#define IRQ_TWI 0x00000200 /* TWI Interrupt */
#define IRQ_DMA7 0x00000400 /* DMA Channel 7 (SPI) Interrupt */
-#define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */
+#define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */
#define IRQ_DMA9 0x00001000 /* DMA Channel 9 (UART0 TX) Interrupt */
#define IRQ_DMA10 0x00002000 /* DMA Channel 10 (UART1 RX) Interrupt */
#define IRQ_DMA11 0x00004000 /* DMA Channel 11 (UART1 TX) Interrupt */
#define WDEV_NONE 0x0006 /* no event on roll over */
#define WDEN 0x0FF0 /* enable watchdog */
#define WDDIS 0x0AD0 /* disable watchdog */
-#define WDRO 0x8000 /* watchdog rolled over latch */
+#define WDRO 0x8000 /* watchdog rolled over latch */
/* depreciated WDOG_CTL Register Masks for legacy code */
#define NINT 0x01 /* Pending Interrupt */
#define IIR_TX_READY 0x02 /* UART_THR empty */
#define IIR_RX_READY 0x04 /* Receive data ready */
-#define IIR_LINE_CHANGE 0x06 /* Receive line status */
+#define IIR_LINE_CHANGE 0x06 /* Receive line status */
#define IIR_STATUS 0x06 /* Highest Priority Pending Interrupt */
/* UARTx_GCTL Masks */
/* entry addresses of the user-callable Boot ROM functions */
-#define _BOOTROM_RESET 0xEF000000
-#define _BOOTROM_FINAL_INIT 0xEF000002
+#define _BOOTROM_RESET 0xEF000000
+#define _BOOTROM_FINAL_INIT 0xEF000002
#define _BOOTROM_DO_MEMORY_DMA 0xEF000006
-#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
-#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
-#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
+#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
+#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
+#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
/* Bit masks for CNT_CONFIG */
#define CNTE 0x1 /* Counter Enable */
-#define nCNTE 0x0
+#define nCNTE 0x0
#define DEBE 0x2 /* Debounce Enable */
-#define nDEBE 0x0
+#define nDEBE 0x0
#define CDGINV 0x10 /* CDG Pin Polarity Invert */
-#define nCDGINV 0x0
+#define nCDGINV 0x0
#define CUDINV 0x20 /* CUD Pin Polarity Invert */
-#define nCUDINV 0x0
+#define nCUDINV 0x0
#define CZMINV 0x40 /* CZM Pin Polarity Invert */
-#define nCZMINV 0x0
+#define nCZMINV 0x0
#define CNTMODE 0x700 /* Counter Operating Mode */
#define ZMZC 0x800 /* CZM Zeroes Counter Enable */
-#define nZMZC 0x0
+#define nZMZC 0x0
#define BNDMODE 0x3000 /* Boundary register Mode */
#define INPDIS 0x8000 /* CUG and CDG Input Disable */
-#define nINPDIS 0x0
+#define nINPDIS 0x0
/* Bit masks for CNT_IMASK */
#define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */
-#define nICIE 0x0
+#define nICIE 0x0
#define UCIE 0x2 /* Up count Interrupt Enable */
-#define nUCIE 0x0
+#define nUCIE 0x0
#define DCIE 0x4 /* Down count Interrupt Enable */
-#define nDCIE 0x0
+#define nDCIE 0x0
#define MINCIE 0x8 /* Min Count Interrupt Enable */
-#define nMINCIE 0x0
+#define nMINCIE 0x0
#define MAXCIE 0x10 /* Max Count Interrupt Enable */
-#define nMAXCIE 0x0
+#define nMAXCIE 0x0
#define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */
-#define nCOV31IE 0x0
+#define nCOV31IE 0x0
#define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */
-#define nCOV15IE 0x0
+#define nCOV15IE 0x0
#define CZEROIE 0x80 /* Count to Zero Interrupt Enable */
-#define nCZEROIE 0x0
+#define nCZEROIE 0x0
#define CZMIE 0x100 /* CZM Pin Interrupt Enable */
-#define nCZMIE 0x0
+#define nCZMIE 0x0
#define CZMEIE 0x200 /* CZM Error Interrupt Enable */
-#define nCZMEIE 0x0
+#define nCZMEIE 0x0
#define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */
-#define nCZMZIE 0x0
+#define nCZMZIE 0x0
/* Bit masks for CNT_STATUS */
#define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */
-#define nICII 0x0
+#define nICII 0x0
#define UCII 0x2 /* Up count Interrupt Identifier */
-#define nUCII 0x0
+#define nUCII 0x0
#define DCII 0x4 /* Down count Interrupt Identifier */
-#define nDCII 0x0
+#define nDCII 0x0
#define MINCII 0x8 /* Min Count Interrupt Identifier */
-#define nMINCII 0x0
+#define nMINCII 0x0
#define MAXCII 0x10 /* Max Count Interrupt Identifier */
-#define nMAXCII 0x0
+#define nMAXCII 0x0
#define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */
-#define nCOV31II 0x0
+#define nCOV31II 0x0
#define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */
-#define nCOV15II 0x0
+#define nCOV15II 0x0
#define CZEROII 0x80 /* Count to Zero Interrupt Identifier */
-#define nCZEROII 0x0
+#define nCZEROII 0x0
#define CZMII 0x100 /* CZM Pin Interrupt Identifier */
-#define nCZMII 0x0
+#define nCZMII 0x0
#define CZMEII 0x200 /* CZM Error Interrupt Identifier */
-#define nCZMEII 0x0
+#define nCZMEII 0x0
#define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */
-#define nCZMZII 0x0
+#define nCZMZII 0x0
/* Bit masks for CNT_COMMAND */
#define W1LMIN 0xf0 /* Load Min Register */
#define W1LMAX 0xf00 /* Load Max Register */
#define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */
-#define nW1ZMONCE 0x0
+#define nW1ZMONCE 0x0
/* Bit masks for CNT_DEBOUNCE */
#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */
#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */
-#define nFIEN 0x0
+#define nFIEN 0x0
#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */
-#define nFTESTDEC 0x0
+#define nFTESTDEC 0x0
#define FWRTEST 0x2000 /* OTP/Fuse Write Test */
-#define nFWRTEST 0x0
+#define nFWRTEST 0x0
#define FRDEN 0x4000 /* OTP/Fuse Read Enable */
-#define nFRDEN 0x0
+#define nFRDEN 0x0
#define FWREN 0x8000 /* OTP/Fuse Write Enable */
-#define nFWREN 0x0
+#define nFWREN 0x0
/* Bit masks for OTP_BEN */
/* Bit masks for OTP_STATUS */
#define FCOMP 0x1 /* OTP/Fuse Access Complete */
-#define nFCOMP 0x0
+#define nFCOMP 0x0
#define FERROR 0x2 /* OTP/Fuse Access Error */
-#define nFERROR 0x0
+#define nFERROR 0x0
#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */
-#define nMMRGLOAD 0x0
+#define nMMRGLOAD 0x0
#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */
-#define nMMRGLOCK 0x0
+#define nMMRGLOCK 0x0
#define FPGMEN 0x40 /* OTP/Fuse Program Enable */
-#define nFPGMEN 0x0
+#define nFPGMEN 0x0
/* Bit masks for OTP_TIMING */
/* Bit masks for SECURE_SYSSWT */
#define EMUDABL 0x1 /* Emulation Disable. */
-#define nEMUDABL 0x0
+#define nEMUDABL 0x0
#define RSTDABL 0x2 /* Reset Disable */
-#define nRSTDABL 0x0
+#define nRSTDABL 0x0
#define L1IDABL 0x1c /* L1 Instruction Memory Disable. */
#define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */
#define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */
#define DMA0OVR 0x800 /* DMA0 Memory Access Override */
-#define nDMA0OVR 0x0
+#define nDMA0OVR 0x0
#define DMA1OVR 0x1000 /* DMA1 Memory Access Override */
-#define nDMA1OVR 0x0
+#define nDMA1OVR 0x0
#define EMUOVR 0x4000 /* Emulation Override */
-#define nEMUOVR 0x0
+#define nEMUOVR 0x0
#define OTPSEN 0x8000 /* OTP Secrets Enable. */
-#define nOTPSEN 0x0
+#define nOTPSEN 0x0
#define L2DABL 0x70000 /* L2 Memory Disable. */
/* Bit masks for SECURE_CONTROL */
#define SECURE0 0x1 /* SECURE 0 */
-#define nSECURE0 0x0
+#define nSECURE0 0x0
#define SECURE1 0x2 /* SECURE 1 */
-#define nSECURE1 0x0
+#define nSECURE1 0x0
#define SECURE2 0x4 /* SECURE 2 */
-#define nSECURE2 0x0
+#define nSECURE2 0x0
#define SECURE3 0x8 /* SECURE 3 */
-#define nSECURE3 0x0
+#define nSECURE3 0x0
/* Bit masks for SECURE_STATUS */
#define SECMODE 0x3 /* Secured Mode Control State */
#define NMI 0x4 /* Non Maskable Interrupt */
-#define nNMI 0x0
+#define nNMI 0x0
#define AFVALID 0x8 /* Authentication Firmware Valid */
-#define nAFVALID 0x0
+#define nAFVALID 0x0
#define AFEXIT 0x10 /* Authentication Firmware Exit */
-#define nAFEXIT 0x0
+#define nAFEXIT 0x0
#define SECSTAT 0xe0 /* Secure Status */
/* Bit masks for NFC_CTL */
#define WR_DLY 0xf /* Write Strobe Delay */
#define RD_DLY 0xf0 /* Read Strobe Delay */
#define NWIDTH 0x100 /* NAND Data Width */
-#define nNWIDTH 0x0
+#define nNWIDTH 0x0
#define PG_SIZE 0x200 /* Page Size */
-#define nPG_SIZE 0x0
+#define nPG_SIZE 0x0
/* Bit masks for NFC_STAT */
#define NBUSY 0x1 /* Not Busy */
-#define nNBUSY 0x0
+#define nNBUSY 0x0
#define WB_FULL 0x2 /* Write Buffer Full */
-#define nWB_FULL 0x0
+#define nWB_FULL 0x0
#define PG_WR_STAT 0x4 /* Page Write Pending */
-#define nPG_WR_STAT 0x0
+#define nPG_WR_STAT 0x0
#define PG_RD_STAT 0x8 /* Page Read Pending */
-#define nPG_RD_STAT 0x0
+#define nPG_RD_STAT 0x0
#define WB_EMPTY 0x10 /* Write Buffer Empty */
-#define nWB_EMPTY 0x0
+#define nWB_EMPTY 0x0
/* Bit masks for NFC_IRQSTAT */
#define NBUSYIRQ 0x1 /* Not Busy IRQ */
-#define nNBUSYIRQ 0x0
+#define nNBUSYIRQ 0x0
#define WB_OVF 0x2 /* Write Buffer Overflow */
-#define nWB_OVF 0x0
+#define nWB_OVF 0x0
#define WB_EDGE 0x4 /* Write Buffer Edge Detect */
-#define nWB_EDGE 0x0
+#define nWB_EDGE 0x0
#define RD_RDY 0x8 /* Read Data Ready */
-#define nRD_RDY 0x0
+#define nRD_RDY 0x0
#define WR_DONE 0x10 /* Page Write Done */
-#define nWR_DONE 0x0
+#define nWR_DONE 0x0
/* Bit masks for NFC_IRQMASK */
#define MASK_BUSYIRQ 0x1 /* Mask Not Busy IRQ */
-#define nMASK_BUSYIRQ 0x0
+#define nMASK_BUSYIRQ 0x0
#define MASK_WBOVF 0x2 /* Mask Write Buffer Overflow */
-#define nMASK_WBOVF 0x0
+#define nMASK_WBOVF 0x0
#define MASK_WBEMPTY 0x4 /* Mask Write Buffer Empty */
-#define nMASK_WBEMPTY 0x0
+#define nMASK_WBEMPTY 0x0
#define MASK_RDRDY 0x8 /* Mask Read Data Ready */
-#define nMASK_RDRDY 0x0
+#define nMASK_RDRDY 0x0
#define MASK_WRDONE 0x10 /* Mask Write Done */
-#define nMASK_WRDONE 0x0
+#define nMASK_WRDONE 0x0
/* Bit masks for NFC_RST */
#define ECC_RST 0x1 /* ECC (and NFC counters) Reset */
-#define nECC_RST 0x0
+#define nECC_RST 0x0
/* Bit masks for NFC_PGCTL */
#define PG_RD_START 0x1 /* Page Read Start */
-#define nPG_RD_START 0x0
+#define nPG_RD_START 0x0
#define PG_WR_START 0x2 /* Page Write Start */
-#define nPG_WR_START 0x0
+#define nPG_WR_START 0x0
/* Bit masks for NFC_ECC0 */
#include <linux/init.h>
#include <asm/blackfin.h>
#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
#endif
.section .l1.text
#include "defBF532.h"
/*include core specific register pointer definitions*/
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
#include <asm/system.h>
#define _DEF_BF532_H
/* include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
/*********************************************************************************** */
/* System MMR Register Map */
#if defined(CONFIG_MTD_DATAFLASH) \
|| defined(CONFIG_MTD_DATAFLASH_MODULE)
+
+static struct mtd_partition bfin_spi_dataflash_partitions[] = {
+ {
+ .name = "bootloader(spi)",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ }, {
+ .name = "linux kernel(spi)",
+ .size = 0xe0000,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "file system(spi)",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct flash_platform_data bfin_spi_dataflash_data = {
+ .name = "SPI Dataflash",
+ .parts = bfin_spi_dataflash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
+};
+
/* DataFlash chip */
static struct bfin5xx_spi_chip data_flash_chip_info = {
.enable_dma = 0, /* use dma transfer with this chip*/
|| defined(CONFIG_MTD_DATAFLASH_MODULE)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, /* Framework bus number */
.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+ .platform_data = &bfin_spi_dataflash_data,
.controller_data = &data_flash_chip_info,
.mode = SPI_MODE_3,
},
#include <linux/init.h>
#include <asm/blackfin.h>
#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
#endif
.section .l1.text
#include "defBF534.h"
/* Include core specific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
#include <asm/system.h>
#define _DEF_BF534_H
/* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
/************************************************************************************
** System MMR Register Map
#define _DEF_BF537_H
/* Include all Core registers and bit definitions*/
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
/* Include all MMR and bit defines common to BF534 */
#include "defBF534.h"
#include <asm/gpio.h>
#include <asm/nand.h>
#include <asm/portmux.h>
-#include <asm/mach/bf54x_keys.h>
+#include <mach/bf54x_keys.h>
#include <asm/dpmc.h>
#include <linux/input.h>
#include <linux/spi/ad7877.h>
#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
-#include <asm/mach/bf54x-lq043.h>
+#include <mach/bf54x-lq043.h>
static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
.width = 480,
#include <asm/nand.h>
#include <asm/dpmc.h>
#include <asm/portmux.h>
-#include <asm/mach/bf54x_keys.h>
+#include <mach/bf54x_keys.h>
#include <linux/input.h>
#include <linux/spi/ad7877.h>
#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
-#include <asm/mach/bf54x-lq043.h>
+#include <mach/bf54x-lq043.h>
static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
.width = 480,
#include <linux/init.h>
#include <asm/blackfin.h>
#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
#endif
.section .l1.text
#include "defBF542.h"
/* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF542 */
#include "defBF544.h"
/* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF544 */
#include "defBF548.h"
/* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
#include "defBF548.h"
/* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
#include "defBF549.h"
/* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */
#define _DEF_BF542_H
/* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF542 */
#define _DEF_BF544_H
/* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF544 */
#define _DEF_BF548_H
/* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
#define _DEF_BF548_H
/* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
#define _DEF_BF549_H
/* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */
#include <linux/init.h>
#include <asm/blackfin.h>
#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
#endif
.section .l1.text
#include "defBF561.h"
/*include core specific register pointer definitions*/
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
#include <asm/system.h>
#endif
*/
/* include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
/*********************************************************************************** */
/* System MMR Register Map */
*/
#include <asm/fixed_code.h>
-#include <asm/mach/anomaly.h>
-#include <asm/mach-common/clocks.h>
+#include <mach/anomaly.h>
+#include <asm/clocks.h>
#ifdef CONFIG_BFIN_KERNEL_CLOCK
#include <linux/linkage.h>
#include <asm/blackfin.h>
-#include <asm/mach/irq.h>
+#include <mach/irq.h>
#include <asm/dpmc.h>
.section .l1.text
#include <asm/asm-offsets.h>
#include <asm/trace.h>
-#include <asm/mach-common/context.S>
+#include <asm/context.S>
#if defined(CONFIG_BFIN_SCRATCH_REG_RETN)
# define EX_SCRATCH_REG RETN
*/
#include <asm/blackfin.h>
-#include <asm/mach/irq.h>
+#include <mach/irq.h>
#include <linux/linkage.h>
#include <asm/entry.h>
#include <asm/asm-offsets.h>
#include <asm/traps.h>
#include <asm/thread_info.h>
-#include <asm/mach-common/context.S>
+#include <asm/context.S>
.extern _ret_from_exception
wakeup |= KPADWE;
break;
#endif
-#ifdef IRQ_CNT
+#ifdef CONFIG_BF54x
case IRQ_CNT:
wakeup |= ROTWE;
break;
local_irq_disable();
-#if defined(CONFIG_BF527) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
/* Clear EMAC Interrupt Status bits so we can demux it later */
bfin_write_EMAC_SYSTAT(-1);
#endif
plast->size += pavail->size;
kmem_cache_free(sram_piece_cache, pavail);
} else {
- pavail->next = plast;
+ pavail->next = plast->next;
plast->next = pavail;
plast = pavail;
}
void *l1_data_A_sram_alloc(size_t size)
{
- unsigned flags;
+ unsigned long flags;
void *addr = NULL;
/* add mutex operation */
int l1_data_A_sram_free(const void *addr)
{
- unsigned flags;
+ unsigned long flags;
int ret;
/* add mutex operation */
void *l1_data_B_sram_alloc(size_t size)
{
#if L1_DATA_B_LENGTH != 0
- unsigned flags;
+ unsigned long flags;
void *addr;
/* add mutex operation */
int l1_data_B_sram_free(const void *addr)
{
#if L1_DATA_B_LENGTH != 0
- unsigned flags;
+ unsigned long flags;
int ret;
/* add mutex operation */
void *l1_inst_sram_alloc(size_t size)
{
#if L1_CODE_LENGTH != 0
- unsigned flags;
+ unsigned long flags;
void *addr;
/* add mutex operation */
int l1_inst_sram_free(const void *addr)
{
#if L1_CODE_LENGTH != 0
- unsigned flags;
+ unsigned long flags;
int ret;
/* add mutex operation */
/* L1 Scratchpad memory allocate function */
void *l1sram_alloc(size_t size)
{
- unsigned flags;
+ unsigned long flags;
void *addr;
/* add mutex operation */
/* L1 Scratchpad memory allocate function */
void *l1sram_alloc_max(size_t *psize)
{
- unsigned flags;
+ unsigned long flags;
void *addr;
/* add mutex operation */
/* L1 Scratchpad memory free function */
int l1sram_free(const void *addr)
{
- unsigned flags;
+ unsigned long flags;
int ret;
/* add mutex operation */
void *l2_sram_alloc(size_t size)
{
#if L2_LENGTH != 0
- unsigned flags;
+ unsigned long flags;
void *addr;
/* add mutex operation */
int l2_sram_free(const void *addr)
{
#if L2_LENGTH != 0
- unsigned flags;
+ unsigned long flags;
int ret;
/* add mutex operation */
} \
} while (0)
+/*
+ * format for entries in the Global Offset Table
+ */
+struct got_entry {
+ uint64_t val;
+};
+
+/*
+ * Layout of the Function Descriptor
+ */
+struct fdesc {
+ uint64_t ip;
+ uint64_t gp;
+};
+
#endif /* _ASM_IA64_ELF_H */
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
+#include <linux/elf.h>
+#include <linux/uaccess.h>
#include <asm-generic/sections.h>
extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
+#ifdef CONFIG_SMP
+extern char __cpu0_per_cpu[];
+#endif
extern char __start___vtop_patchlist[], __end___vtop_patchlist[];
extern char __start___rse_patchlist[], __end___rse_patchlist[];
extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[];
extern char __start_unwind[], __end_unwind[];
extern char __start_ivt_text[], __end_ivt_text[];
+#undef dereference_function_descriptor
+static inline void *dereference_function_descriptor(void *ptr)
+{
+ struct fdesc *desc = ptr;
+ void *p;
+
+ if (!probe_kernel_address(&desc->ip, p))
+ ptr = p;
+ return ptr;
+}
+
+
#endif /* _ASM_IA64_SECTIONS_H */
* until the transfer is complete. In order to get the asynch
* version of bte_copy, you must perform this check yourself.
*/
-#define BTE_UNALIGNED_COPY(src, dest, len, mode) \
- (((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) || \
- (dest & L1_CACHE_MASK)) ? \
- bte_unaligned_copy(src, dest, len, mode) : \
+#define BTE_UNALIGNED_COPY(src, dest, len, mode) \
+ (((len & (L1_CACHE_BYTES - 1)) || \
+ (src & (L1_CACHE_BYTES - 1)) || \
+ (dest & (L1_CACHE_BYTES - 1))) ? \
+ bte_unaligned_copy(src, dest, len, mode) : \
bte_copy(src, dest, len, mode, NULL))
if (md->attribute & EFI_MEMORY_WP) {
name = "System ROM";
flags |= IORESOURCE_READONLY;
- } else {
+ } else if (md->attribute == EFI_MEMORY_UC)
+ name = "Uncached RAM";
+ else
name = "System RAM";
- }
break;
case EFI_ACPI_MEMORY_NVS:
;;
#else
(isAP) br.few 2f
- mov r20=r19
- sub r19=r19,r18
+ movl r20=__cpu0_per_cpu
;;
shr.u r18=r18,3
1:
- ld8 r21=[r20],8;;
- st8[r19]=r21,8
+ ld8 r21=[r19],8;;
+ st8[r20]=r21,8
adds r18=-1,r18;;
cmp4.lt p7,p6=0,r18
(p7) br.cond.dptk.few 1b
+ mov r19=r20
+ ;;
2:
#endif
tpa r19=r19
#undef N
-struct got_entry {
- uint64_t val;
-};
-
-struct fdesc {
- uint64_t ip;
- uint64_t gp;
-};
-
/* Opaque struct for insns, to protect against derefs. */
struct insn;
ia64_mca_init();
platform_setup(cmdline_p);
+#ifndef CONFIG_IA64_HP_SIM
check_sal_cache_flush();
+#endif
paging_init();
}
return -EBUSY;
}
- cpu_clear(cpu, cpu_online_map);
-
if (migrate_platform_irqs(cpu)) {
cpu_set(cpu, cpu_online_map);
return (-EBUSY);
}
remove_siblinginfo(cpu);
- cpu_clear(cpu, cpu_online_map);
fixup_irqs();
+ cpu_clear(cpu, cpu_online_map);
local_flush_tlb_all();
cpu_clear(cpu, cpu_callin_map);
return 0;
/* Per-cpu data: */
percpu : { } :percpu
. = ALIGN(PERCPU_PAGE_SIZE);
-#ifdef CONFIG_SMP
- . = . + PERCPU_PAGE_SIZE; /* cpu0 per-cpu space */
-#endif
__phys_per_cpu_start = .;
.data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET)
{
data : { } :data
.data : AT(ADDR(.data) - LOAD_OFFSET)
{
+#ifdef CONFIG_SMP
+ . = ALIGN(PERCPU_PAGE_SIZE);
+ __cpu0_per_cpu = .;
+ . = . + PERCPU_PAGE_SIZE; /* cpu0 per-cpu space */
+#endif
DATA_DATA
*(.data1)
*(.gnu.linkonce.d*)
#include <asm/cacheflush.h>
#include <asm/div64.h>
#include <asm/tlb.h>
+#include <asm/elf.h>
#include "misc.h"
#include "vti.h"
{ NULL }
};
-
-struct fdesc{
- unsigned long ip;
- unsigned long gp;
-};
-
static void kvm_flush_icache(unsigned long start, unsigned long len)
{
int l;
* get_zeroed_page().
*/
if (first_time) {
- void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
+ void *cpu0_data = __cpu0_per_cpu;
first_time=0;
for_each_possible_early_cpu(cpu) {
if (cpu == 0) {
- void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
+ void *cpu0_data = __cpu0_per_cpu;
__per_cpu_offset[cpu] = (char*)cpu0_data -
__per_cpu_start;
} else if (node == node_cpuid[cpu].nid) {
entry = find_next_zero_bit(map, mapsize, last_entry);
}
- if (entry > mapsize)
+ if (entry > mapsize) {
+ kfree(ca_dmamap);
goto map_return;
+ }
for (i = 0; i < entries; i++)
set_bit(entry + i, map);
default "01000000" if PLAT_M32104UT
default "00800000" if PLAT_OAKS32R
-config NOHIGHMEM
- bool
- default y
-
config ARCH_DISCONTIGMEM_ENABLE
bool "Internal RAM Support"
depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104
source "drivers/pci/Kconfig"
config ISA
- bool "ISA support"
- help
- Find out whether you have ISA slots on your motherboard. ISA is the
- name of a bus system, i.e. the way the CPU talks to the other stuff
- inside your box. If you have ISA, say Y, otherwise N.
+ bool
source "drivers/pcmcia/Kconfig"
and3 r4, r4, #0x8000 ; check BSM bit
#endif
beqz r4, resume_kernel
-ENTRY(resume_userspace)
+resume_userspace:
DISABLE_INTERRUPTS(r4) ; make sure we don't miss an interrupt
; setting need_resched or sigpending
; between sampling and the iret
.global _end
ENTRY(stext)
ENTRY(_stext)
-ENTRY(startup_32)
/* Setup up the stack pointer */
LDIMM (r0, spi_stack_top)
LDIMM (r1, spu_stack_top)
#include <linux/module.h>
#include <asm/uaccess.h>
-atomic_t irq_err_count;
-atomic_t irq_mis_count;
-
/*
* Generic, controller-independent functions:
*/
seq_putc(p, '\n');
skip:
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
- } else if (i == NR_IRQS) {
- seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
- seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count));
}
return 0;
}
#include <asm/delay.h>
#include <asm/irq.h>
#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
/* platform dependent support */
EXPORT_SYMBOL(boot_cpu_data);
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(clear_page);
EXPORT_SYMBOL(strlen);
+EXPORT_SYMBOL(empty_zero_page);
EXPORT_SYMBOL(_inb);
EXPORT_SYMBOL(_inw);
#include <linux/err.h>
-static int hlt_counter=0;
-
/*
* Return saved PC of a blocked thread.
*/
/*
* Powermanagement idle function, if any..
*/
-void (*pm_idle)(void) = NULL;
-EXPORT_SYMBOL(pm_idle);
+static void (*pm_idle)(void) = NULL;
void (*pm_power_off)(void) = NULL;
EXPORT_SYMBOL(pm_power_off);
-void disable_hlt(void)
-{
- hlt_counter++;
-}
-
-EXPORT_SYMBOL(disable_hlt);
-
-void enable_hlt(void)
-{
- hlt_counter--;
-}
-
-EXPORT_SYMBOL(enable_hlt);
-
/*
* We use this is we don't have any better
* idle routine..
*/
-void default_idle(void)
+static void default_idle(void)
{
/* M32R_FIXME: Please use "cpu_sleep" mode. */
cpu_relax();
return 0;
}
-/*
- * Capture the user space registers if the task is not running (in user space)
- */
-int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
-{
- /* M32R_FIXME */
- return 1;
-}
-
asmlinkage int sys_fork(unsigned long r0, unsigned long r1, unsigned long r2,
unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6,
struct pt_regs regs)
void smp_ipi_timer_interrupt(struct pt_regs *);
void smp_local_timer_interrupt(void);
-void send_IPI_allbutself(int, int);
+static void send_IPI_allbutself(int, int);
static void send_IPI_mask(cpumask_t, int, int);
unsigned long send_IPI_mask_phys(cpumask_t, int, int);
* ---------- --- --------------------------------------------------------
*
*==========================================================================*/
-void send_IPI_allbutself(int ipi_num, int try)
+static void send_IPI_allbutself(int ipi_num, int try)
{
cpumask_t cpumask;
#include <asm/hw_irq.h>
#ifdef CONFIG_SMP
-extern void send_IPI_allbutself(int, int);
extern void smp_local_timer_interrupt(void);
#endif
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick
*/
-irqreturn_t timer_interrupt(int irq, void *dev_id)
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
#ifndef CONFIG_SMP
profile_tick(CPU_PROFILING);
return IRQ_HANDLED;
}
-struct irqaction irq0 = {
+static struct irqaction irq0 = {
.handler = timer_interrupt,
.flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
((unsigned long)func - (unsigned long)eit_vector - entry*4)/4 \
+ 0xff000000UL
-void set_eit_vector_entries(void)
+static void set_eit_vector_entries(void)
{
extern void default_eit_handler(void);
extern void system_call(void);
cpu_init();
}
-int kstack_depth_to_print = 24;
+static int kstack_depth_to_print = 24;
-void show_trace(struct task_struct *task, unsigned long *stack)
+static void show_trace(struct task_struct *task, unsigned long *stack)
{
unsigned long addr;
printk("\n");
}
-DEFINE_SPINLOCK(die_lock);
+static DEFINE_SPINLOCK(die_lock);
void die(const char * str, struct pt_regs * regs, long err)
{
*/
#include <linux/param.h>
+#include <linux/module.h>
#ifdef CONFIG_SMP
#include <linux/sched.h>
#include <asm/current.h>
{
__const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
}
+EXPORT_SYMBOL(__ndelay);
do {
/* reset IKBD ACIA */
acia.key_ctrl = ACIA_RESET |
- (atari_switches & ATARI_SWITCH_IKBD) ? ACIA_RHTID : 0;
+ ((atari_switches & ATARI_SWITCH_IKBD) ?
+ ACIA_RHTID : 0);
(void)acia.key_ctrl;
(void)acia.key_data;
/* reset MIDI ACIA */
acia.mid_ctrl = ACIA_RESET |
- (atari_switches & ATARI_SWITCH_MIDI) ? ACIA_RHTID : 0;
+ ((atari_switches & ATARI_SWITCH_MIDI) ?
+ ACIA_RHTID : 0);
(void)acia.mid_ctrl;
(void)acia.mid_data;
ACIA_RHTID : ACIA_RLTID);
acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S |
- (atari_switches & ATARI_SWITCH_MIDI) ? ACIA_RHTID : 0;
+ ((atari_switches & ATARI_SWITCH_MIDI) ?
+ ACIA_RHTID : 0);
/* make sure the interrupt line is up */
} while ((mfp.par_dt_reg & 0x10) == 0);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:00 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDEDOUBLER=y
CONFIG_BLK_DEV_BUDDHA=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
CONFIG_GVP11_SCSI=y
CONFIG_SCSI_A4000T=y
CONFIG_SCSI_ZORRO7XX=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_PAULA=m
CONFIG_DMASOUND=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:01 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
-CONFIG_APOLLO_ELPLUS=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:02 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_FALCON_IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
CONFIG_ATARI_SCSI=y
# CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
# CONFIG_ATARI_SCSI_RESET_BOOT is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_ATARI=m
CONFIG_DMASOUND=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# Character devices
#
CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
CONFIG_ATARI_MIDI=m
CONFIG_ATARI_DSP56K=m
-# CONFIG_SERIAL_CONSOLE is not set
#
# File systems
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
CONFIG_JBD=y
+CONFIG_JBD2=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
-CONFIG_SUNRPC_BIND34=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:03 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_53C700_BE_BUS=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_BVME6000_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=m
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:04 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:06 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_MAC_IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
# CONFIG_SCSI_DEBUG is not set
CONFIG_MAC_SCSI=y
CONFIG_SCSI_MAC_ESP=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:07 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_MAC_IDE=y
CONFIG_BLK_DEV_Q40IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
CONFIG_MVME16x_SCSI=y
CONFIG_BVME6000_SCSI=y
CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_HYDRA=m
CONFIG_ZORRO8390=m
CONFIG_APNE=m
-CONFIG_APOLLO_ELPLUS=y
CONFIG_MAC8390=y
CONFIG_MAC89x0=m
CONFIG_MACSONIC=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_ATARI=m
CONFIG_DMASOUND_PAULA=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# Character devices
#
CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
CONFIG_ATARI_MIDI=m
CONFIG_ATARI_DSP56K=m
CONFIG_AMIGA_BUILTIN_SERIAL=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
CONFIG_JBD=y
+CONFIG_JBD2=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:08 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_MVME147_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:09 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_53C700_BE_BUS=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_MVME16x_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:10 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_GENERIC_ISA_DMA=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_Q40IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_Q40=m
CONFIG_DMASOUND=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:11 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_SUN3_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:12 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
depends on CPU_MIPS32_R2
#depends on CPU_MIPS64_R2 # once there is hardware ...
depends on SYS_SUPPORTS_MULTITHREADING
- select GENERIC_CLOCKEVENTS_BROADCAST
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
select MIPS_MT
Includes a loader for loading an elf relocatable object
onto another VPE and running it.
-config MIPS_MT_SMTC_INSTANT_REPLAY
- bool "Low-latency Dispatch of Deferred SMTC IPIs"
- depends on MIPS_MT_SMTC && !PREEMPT
- default y
- help
- SMTC pseudo-interrupts between TCs are deferred and queued
- if the target TC is interrupt-inhibited (IXMT). In the first
- SMTC prototypes, these queued IPIs were serviced on return
- to user mode, or on entry into the kernel idle loop. The
- INSTANT_REPLAY option dispatches them as part of local_irq_restore()
- processing, which adds runtime overhead (hence the option to turn
- it off), but ensures that IPIs are handled promptly even under
- heavy I/O interrupt load.
-
config MIPS_MT_SMTC_IM_BACKSTOP
bool "Use per-TC register bits as backstop for inhibited IM bits"
depends on MIPS_MT_SMTC
- default y
+ default n
help
To support multiple TC microthreads acting as "CPUs" within
a VPE, VPE-wide interrupt mask bits must be specially manipulated
during interrupt handling. To support legacy drivers and interrupt
controller management code, SMTC has a "backstop" to track and
if necessary restore the interrupt mask. This has some performance
- impact on interrupt service overhead. Disable it only if you know
- what you are doing.
+ impact on interrupt service overhead.
config MIPS_MT_SMTC_IRQAFF
bool "Support IRQ affinity API"
Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.)
for SMTC Linux kernel. Requires platform support, of which
an example can be found in the MIPS kernel i8259 and Malta
- platform code. It is recommended that MIPS_MT_SMTC_INSTANT_REPLAY
- be enabled if MIPS_MT_SMTC_IRQAFF is used. Adds overhead to
- interrupt dispatch, and should be used only if you know what
- you are doing.
+ platform code. Adds some overhead to interrupt dispatch, and
+ should be used only if you know what you are doing.
config MIPS_VPE_LOADER_TOM
bool "Load VPE program into memory hidden from linux"
source "init/Kconfig"
+config PROBE_INITRD_HEADER
+ bool "Probe initrd header created by addinitrd"
+ depends on BLK_DEV_INITRD
+ help
+ Probe initrd header at the last page of kernel image.
+ Say Y here if you are using arch/mips/boot/addinitrd.c to
+ add initrd or initramfs image to the kernel image.
+ Otherwise, say N.
+
menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
config HW_HAS_EISA
{
gpio -= AU1XXX_GPIO_BASE;
- gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio);
+ gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio);
}
static int au1xxx_gpio2_direction_input(unsigned gpio)
static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
{
gpio -= AU1XXX_GPIO_BASE;
- gpio2->dir = (0x01 << gpio) | (value << gpio);
+ gpio2->dir |= 0x01 << gpio;
+ gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio);
return 0;
}
static int au1xxx_gpio1_direction_output(unsigned gpio, int value)
{
gpio1->trioutclr = (0x01 & gpio);
+ au1xxx_gpio1_write(gpio, value);
return 0;
}
obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o
obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o
+obj-$(CONFIG_MIPS_MT_SMTC) += cevt-smtc.o
obj-$(CONFIG_CEVT_DS1287) += cevt-ds1287.o
obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o
obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o
#include <asm/smtc_ipi.h>
#include <asm/time.h>
+#include <asm/cevt-r4k.h>
+
+/*
+ * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
+ * of these routines with SMTC-specific variants.
+ */
+
+#ifndef CONFIG_MIPS_MT_SMTC
static int mips_next_event(unsigned long delta,
struct clock_event_device *evt)
unsigned int cnt;
int res;
-#ifdef CONFIG_MIPS_MT_SMTC
- {
- unsigned long flags, vpflags;
- local_irq_save(flags);
- vpflags = dvpe();
-#endif
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
-#ifdef CONFIG_MIPS_MT_SMTC
- evpe(vpflags);
- local_irq_restore(flags);
- }
-#endif
return res;
}
-static void mips_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+void mips_set_clock_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
{
/* Nothing to do ... */
}
-static DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
-static int cp0_timer_irq_installed;
+DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
+int cp0_timer_irq_installed;
-/*
- * Timer ack for an R4k-compatible timer of a known frequency.
- */
-static void c0_timer_ack(void)
-{
- write_c0_compare(read_c0_compare());
-}
+#ifndef CONFIG_MIPS_MT_SMTC
-/*
- * Possibly handle a performance counter interrupt.
- * Return true if the timer interrupt should not be checked
- */
-static inline int handle_perf_irq(int r2)
-{
- /*
- * The performance counter overflow interrupt may be shared with the
- * timer interrupt (cp0_perfcount_irq < 0). If it is and a
- * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
- * and we can't reliably determine if a counter interrupt has also
- * happened (!r2) then don't check for a timer interrupt.
- */
- return (cp0_perfcount_irq < 0) &&
- perf_irq() == IRQ_HANDLED &&
- !r2;
-}
-
-static irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
+irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
{
const int r2 = cpu_has_mips_r2;
struct clock_event_device *cd;
* interrupt. Being the paranoiacs we are we check anyway.
*/
if (!r2 || (read_c0_cause() & (1 << 30))) {
- c0_timer_ack();
-#ifdef CONFIG_MIPS_MT_SMTC
- if (cpu_data[cpu].vpe_id)
- goto out;
- cpu = 0;
-#endif
+ /* Clear Count/Compare Interrupt */
+ write_c0_compare(read_c0_compare());
cd = &per_cpu(mips_clockevent_device, cpu);
cd->event_handler(cd);
}
return IRQ_HANDLED;
}
-static struct irqaction c0_compare_irqaction = {
+#endif /* Not CONFIG_MIPS_MT_SMTC */
+
+struct irqaction c0_compare_irqaction = {
.handler = c0_compare_interrupt,
-#ifdef CONFIG_MIPS_MT_SMTC
- .flags = IRQF_DISABLED,
-#else
.flags = IRQF_DISABLED | IRQF_PERCPU,
-#endif
.name = "timer",
};
-#ifdef CONFIG_MIPS_MT_SMTC
-DEFINE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device);
-
-static void smtc_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
-}
-
-static void mips_broadcast(cpumask_t mask)
-{
- unsigned int cpu;
-
- for_each_cpu_mask(cpu, mask)
- smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
-}
-
-static void setup_smtc_dummy_clockevent_device(void)
-{
- //uint64_t mips_freq = mips_hpt_^frequency;
- unsigned int cpu = smp_processor_id();
- struct clock_event_device *cd;
- cd = &per_cpu(smtc_dummy_clockevent_device, cpu);
-
- cd->name = "SMTC";
- cd->features = CLOCK_EVT_FEAT_DUMMY;
-
- /* Calculate the min / max delta */
- cd->mult = 0; //div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
- cd->shift = 0; //32;
- cd->max_delta_ns = 0; //clockevent_delta2ns(0x7fffffff, cd);
- cd->min_delta_ns = 0; //clockevent_delta2ns(0x30, cd);
-
- cd->rating = 200;
- cd->irq = 17; //-1;
-// if (cpu)
-// cd->cpumask = CPU_MASK_ALL; // cpumask_of_cpu(cpu);
-// else
- cd->cpumask = cpumask_of_cpu(cpu);
-
- cd->set_mode = smtc_set_mode;
-
- cd->broadcast = mips_broadcast;
-
- clockevents_register_device(cd);
-}
-#endif
-
-static void mips_event_handler(struct clock_event_device *dev)
+void mips_event_handler(struct clock_event_device *dev)
{
}
return (read_c0_cause() >> cp0_compare_irq) & 0x100;
}
-static int c0_compare_int_usable(void)
+/*
+ * Compare interrupt can be routed and latched outside the core,
+ * so a single execution hazard barrier may not be enough to give
+ * it time to clear as seen in the Cause register. 4 time the
+ * pipeline depth seems reasonably conservative, and empirically
+ * works better in configurations with high CPU/bus clock ratios.
+ */
+
+#define compare_change_hazard() \
+ do { \
+ irq_disable_hazard(); \
+ irq_disable_hazard(); \
+ irq_disable_hazard(); \
+ irq_disable_hazard(); \
+ } while (0)
+
+int c0_compare_int_usable(void)
{
unsigned int delta;
unsigned int cnt;
*/
if (c0_compare_int_pending()) {
write_c0_compare(read_c0_count());
- irq_disable_hazard();
+ compare_change_hazard();
if (c0_compare_int_pending())
return 0;
}
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
- irq_disable_hazard();
+ compare_change_hazard();
if ((int)(read_c0_count() - cnt) < 0)
break;
/* increase delta if the timer was already expired */
while ((int)(read_c0_count() - cnt) <= 0)
; /* Wait for expiry */
+ compare_change_hazard();
if (!c0_compare_int_pending())
return 0;
write_c0_compare(read_c0_count());
- irq_disable_hazard();
+ compare_change_hazard();
if (c0_compare_int_pending())
return 0;
return 1;
}
+#ifndef CONFIG_MIPS_MT_SMTC
+
int __cpuinit mips_clockevent_init(void)
{
uint64_t mips_freq = mips_hpt_frequency;
if (!cpu_has_counter || !mips_hpt_frequency)
return -ENXIO;
-#ifdef CONFIG_MIPS_MT_SMTC
- setup_smtc_dummy_clockevent_device();
-
- /*
- * On SMTC we only register VPE0's compare interrupt as clockevent
- * device.
- */
- if (cpu)
- return 0;
-#endif
-
if (!c0_compare_int_usable())
return -ENXIO;
cd->rating = 300;
cd->irq = irq;
-#ifdef CONFIG_MIPS_MT_SMTC
- cd->cpumask = CPU_MASK_ALL;
-#else
cd->cpumask = cpumask_of_cpu(cpu);
-#endif
cd->set_next_event = mips_next_event;
- cd->set_mode = mips_set_mode;
+ cd->set_mode = mips_set_clock_mode;
cd->event_handler = mips_event_handler;
clockevents_register_device(cd);
cp0_timer_irq_installed = 1;
-#ifdef CONFIG_MIPS_MT_SMTC
-#define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq)
- setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT);
-#else
setup_irq(irq, &c0_compare_irqaction);
-#endif
return 0;
}
+
+#endif /* Not CONFIG_MIPS_MT_SMTC */
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2008 Kevin D. Kissell, Paralogos sarl
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+
+#include <asm/smtc_ipi.h>
+#include <asm/time.h>
+#include <asm/cevt-r4k.h>
+
+/*
+ * Variant clock event timer support for SMTC on MIPS 34K, 1004K
+ * or other MIPS MT cores.
+ *
+ * Notes on SMTC Support:
+ *
+ * SMTC has multiple microthread TCs pretending to be Linux CPUs.
+ * But there's only one Count/Compare pair per VPE, and Compare
+ * interrupts are taken opportunisitically by available TCs
+ * bound to the VPE with the Count register. The new timer
+ * framework provides for global broadcasts, but we really
+ * want VPE-level multicasts for best behavior. So instead
+ * of invoking the high-level clock-event broadcast code,
+ * this version of SMTC support uses the historical SMTC
+ * multicast mechanisms "under the hood", appearing to the
+ * generic clock layer as if the interrupts are per-CPU.
+ *
+ * The approach taken here is to maintain a set of NR_CPUS
+ * virtual timers, and track which "CPU" needs to be alerted
+ * at each event.
+ *
+ * It's unlikely that we'll see a MIPS MT core with more than
+ * 2 VPEs, but we *know* that we won't need to handle more
+ * VPEs than we have "CPUs". So NCPUs arrays of NCPUs elements
+ * is always going to be overkill, but always going to be enough.
+ */
+
+unsigned long smtc_nexttime[NR_CPUS][NR_CPUS];
+static int smtc_nextinvpe[NR_CPUS];
+
+/*
+ * Timestamps stored are absolute values to be programmed
+ * into Count register. Valid timestamps will never be zero.
+ * If a Zero Count value is actually calculated, it is converted
+ * to be a 1, which will introduce 1 or two CPU cycles of error
+ * roughly once every four billion events, which at 1000 HZ means
+ * about once every 50 days. If that's actually a problem, one
+ * could alternate squashing 0 to 1 and to -1.
+ */
+
+#define MAKEVALID(x) (((x) == 0L) ? 1L : (x))
+#define ISVALID(x) ((x) != 0L)
+
+/*
+ * Time comparison is subtle, as it's really truncated
+ * modular arithmetic.
+ */
+
+#define IS_SOONER(a, b, reference) \
+ (((a) - (unsigned long)(reference)) < ((b) - (unsigned long)(reference)))
+
+/*
+ * CATCHUP_INCREMENT, used when the function falls behind the counter.
+ * Could be an increasing function instead of a constant;
+ */
+
+#define CATCHUP_INCREMENT 64
+
+static int mips_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ unsigned long flags;
+ unsigned int mtflags;
+ unsigned long timestamp, reference, previous;
+ unsigned long nextcomp = 0L;
+ int vpe = current_cpu_data.vpe_id;
+ int cpu = smp_processor_id();
+ local_irq_save(flags);
+ mtflags = dmt();
+
+ /*
+ * Maintain the per-TC virtual timer
+ * and program the per-VPE shared Count register
+ * as appropriate here...
+ */
+ reference = (unsigned long)read_c0_count();
+ timestamp = MAKEVALID(reference + delta);
+ /*
+ * To really model the clock, we have to catch the case
+ * where the current next-in-VPE timestamp is the old
+ * timestamp for the calling CPE, but the new value is
+ * in fact later. In that case, we have to do a full
+ * scan and discover the new next-in-VPE CPU id and
+ * timestamp.
+ */
+ previous = smtc_nexttime[vpe][cpu];
+ if (cpu == smtc_nextinvpe[vpe] && ISVALID(previous)
+ && IS_SOONER(previous, timestamp, reference)) {
+ int i;
+ int soonest = cpu;
+
+ /*
+ * Update timestamp array here, so that new
+ * value gets considered along with those of
+ * other virtual CPUs on the VPE.
+ */
+ smtc_nexttime[vpe][cpu] = timestamp;
+ for_each_online_cpu(i) {
+ if (ISVALID(smtc_nexttime[vpe][i])
+ && IS_SOONER(smtc_nexttime[vpe][i],
+ smtc_nexttime[vpe][soonest], reference)) {
+ soonest = i;
+ }
+ }
+ smtc_nextinvpe[vpe] = soonest;
+ nextcomp = smtc_nexttime[vpe][soonest];
+ /*
+ * Otherwise, we don't have to process the whole array rank,
+ * we just have to see if the event horizon has gotten closer.
+ */
+ } else {
+ if (!ISVALID(smtc_nexttime[vpe][smtc_nextinvpe[vpe]]) ||
+ IS_SOONER(timestamp,
+ smtc_nexttime[vpe][smtc_nextinvpe[vpe]], reference)) {
+ smtc_nextinvpe[vpe] = cpu;
+ nextcomp = timestamp;
+ }
+ /*
+ * Since next-in-VPE may me the same as the executing
+ * virtual CPU, we update the array *after* checking
+ * its value.
+ */
+ smtc_nexttime[vpe][cpu] = timestamp;
+ }
+
+ /*
+ * It may be that, in fact, we don't need to update Compare,
+ * but if we do, we want to make sure we didn't fall into
+ * a crack just behind Count.
+ */
+ if (ISVALID(nextcomp)) {
+ write_c0_compare(nextcomp);
+ ehb();
+ /*
+ * We never return an error, we just make sure
+ * that we trigger the handlers as quickly as
+ * we can if we fell behind.
+ */
+ while ((nextcomp - (unsigned long)read_c0_count())
+ > (unsigned long)LONG_MAX) {
+ nextcomp += CATCHUP_INCREMENT;
+ write_c0_compare(nextcomp);
+ ehb();
+ }
+ }
+ emt(mtflags);
+ local_irq_restore(flags);
+ return 0;
+}
+
+
+void smtc_distribute_timer(int vpe)
+{
+ unsigned long flags;
+ unsigned int mtflags;
+ int cpu;
+ struct clock_event_device *cd;
+ unsigned long nextstamp = 0L;
+ unsigned long reference;
+
+
+repeat:
+ for_each_online_cpu(cpu) {
+ /*
+ * Find virtual CPUs within the current VPE who have
+ * unserviced timer requests whose time is now past.
+ */
+ local_irq_save(flags);
+ mtflags = dmt();
+ if (cpu_data[cpu].vpe_id == vpe &&
+ ISVALID(smtc_nexttime[vpe][cpu])) {
+ reference = (unsigned long)read_c0_count();
+ if ((smtc_nexttime[vpe][cpu] - reference)
+ > (unsigned long)LONG_MAX) {
+ smtc_nexttime[vpe][cpu] = 0L;
+ emt(mtflags);
+ local_irq_restore(flags);
+ /*
+ * We don't send IPIs to ourself.
+ */
+ if (cpu != smp_processor_id()) {
+ smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
+ } else {
+ cd = &per_cpu(mips_clockevent_device, cpu);
+ cd->event_handler(cd);
+ }
+ } else {
+ /* Local to VPE but Valid Time not yet reached. */
+ if (!ISVALID(nextstamp) ||
+ IS_SOONER(smtc_nexttime[vpe][cpu], nextstamp,
+ reference)) {
+ smtc_nextinvpe[vpe] = cpu;
+ nextstamp = smtc_nexttime[vpe][cpu];
+ }
+ emt(mtflags);
+ local_irq_restore(flags);
+ }
+ } else {
+ emt(mtflags);
+ local_irq_restore(flags);
+
+ }
+ }
+ /* Reprogram for interrupt at next soonest timestamp for VPE */
+ if (ISVALID(nextstamp)) {
+ write_c0_compare(nextstamp);
+ ehb();
+ if ((nextstamp - (unsigned long)read_c0_count())
+ > (unsigned long)LONG_MAX)
+ goto repeat;
+ }
+}
+
+
+irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
+{
+ int cpu = smp_processor_id();
+
+ /* If we're running SMTC, we've got MIPS MT and therefore MIPS32R2 */
+ handle_perf_irq(1);
+
+ if (read_c0_cause() & (1 << 30)) {
+ /* Clear Count/Compare Interrupt */
+ write_c0_compare(read_c0_compare());
+ smtc_distribute_timer(cpu_data[cpu].vpe_id);
+ }
+ return IRQ_HANDLED;
+}
+
+
+int __cpuinit mips_clockevent_init(void)
+{
+ uint64_t mips_freq = mips_hpt_frequency;
+ unsigned int cpu = smp_processor_id();
+ struct clock_event_device *cd;
+ unsigned int irq;
+ int i;
+ int j;
+
+ if (!cpu_has_counter || !mips_hpt_frequency)
+ return -ENXIO;
+ if (cpu == 0) {
+ for (i = 0; i < num_possible_cpus(); i++) {
+ smtc_nextinvpe[i] = 0;
+ for (j = 0; j < num_possible_cpus(); j++)
+ smtc_nexttime[i][j] = 0L;
+ }
+ /*
+ * SMTC also can't have the usablility test
+ * run by secondary TCs once Compare is in use.
+ */
+ if (!c0_compare_int_usable())
+ return -ENXIO;
+ }
+
+ /*
+ * With vectored interrupts things are getting platform specific.
+ * get_c0_compare_int is a hook to allow a platform to return the
+ * interrupt number of it's liking.
+ */
+ irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+ if (get_c0_compare_int)
+ irq = get_c0_compare_int();
+
+ cd = &per_cpu(mips_clockevent_device, cpu);
+
+ cd->name = "MIPS";
+ cd->features = CLOCK_EVT_FEAT_ONESHOT;
+
+ /* Calculate the min / max delta */
+ cd->mult = div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
+ cd->shift = 32;
+ cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
+ cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
+
+ cd->rating = 300;
+ cd->irq = irq;
+ cd->cpumask = cpumask_of_cpu(cpu);
+ cd->set_next_event = mips_next_event;
+ cd->set_mode = mips_set_clock_mode;
+ cd->event_handler = mips_event_handler;
+
+ clockevents_register_device(cd);
+
+ /*
+ * On SMTC we only want to do the data structure
+ * initialization and IRQ setup once.
+ */
+ if (cpu)
+ return 0;
+ /*
+ * And we need the hwmask associated with the c0_compare
+ * vector to be initialized.
+ */
+ irq_hwmask[irq] = (0x100 << cp0_compare_irq);
+ if (cp0_timer_irq_installed)
+ return 0;
+
+ cp0_timer_irq_installed = 1;
+
+ setup_irq(irq, &c0_compare_irqaction);
+
+ return 0;
+}
local_irq_enable();
}
-/*
- * There is a race when WAIT instruction executed with interrupt
- * enabled.
- * But it is implementation-dependent wheter the pipelie restarts when
- * a non-enabled interrupt is requested.
- */
-static void r4k_wait(void)
-{
- __asm__(" .set mips3 \n"
- " wait \n"
- " .set mips0 \n");
-}
+extern void r4k_wait(void);
/*
* This variant is preferable as it allows testing need_resched and going to
* interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
* using this version a gamble.
*/
-static void r4k_wait_irqoff(void)
+void r4k_wait_irqoff(void)
{
local_irq_disable();
if (!need_resched())
- __asm__(" .set mips3 \n"
+ __asm__(" .set push \n"
+ " .set mips3 \n"
" wait \n"
- " .set mips0 \n");
+ " .set pop \n");
local_irq_enable();
+ __asm__(" .globl __pastwait \n"
+ "__pastwait: \n");
+ return;
}
/*
__setup("nowait", wait_disable);
-static inline void check_wait(void)
+void __init check_wait(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
void __init check_bugs32(void)
{
- check_wait();
check_errata();
}
FEXPORT(restore_all) # restore full frame
#ifdef CONFIG_MIPS_MT_SMTC
-/* Detect and execute deferred IPI "interrupts" */
- LONG_L s0, TI_REGS($28)
- LONG_S sp, TI_REGS($28)
- jal deferred_smtc_ipi
- LONG_S s0, TI_REGS($28)
#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
/* Re-arm any temporarily masked interrupts not explicitly "acked" */
mfc0 v0, CP0_TCSTATUS
xor t0, t0, t3
mtc0 t0, CP0_TCCONTEXT
#endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */
+/* Detect and execute deferred IPI "interrupts" */
+ LONG_L s0, TI_REGS($28)
+ LONG_S sp, TI_REGS($28)
+ jal deferred_smtc_ipi
+ LONG_S s0, TI_REGS($28)
#endif /* CONFIG_MIPS_MT_SMTC */
.set noat
RESTORE_TEMP
#include <asm/stackframe.h>
#include <asm/war.h>
#include <asm/page.h>
+#include <asm/thread_info.h>
#define PANIC_PIC(msg) \
.set push; \
__FINIT
+ .align 5 /* 32 byte rollback region */
+LEAF(r4k_wait)
+ .set push
+ .set noreorder
+ /* start of rollback region */
+ LONG_L t0, TI_FLAGS($28)
+ nop
+ andi t0, _TIF_NEED_RESCHED
+ bnez t0, 1f
+ nop
+ nop
+ nop
+ .set mips3
+ wait
+ /* end of rollback region (the region size must be power of two) */
+ .set pop
+1:
+ jr ra
+ END(r4k_wait)
+
+ .macro BUILD_ROLLBACK_PROLOGUE handler
+ FEXPORT(rollback_\handler)
+ .set push
+ .set noat
+ MFC0 k0, CP0_EPC
+ PTR_LA k1, r4k_wait
+ ori k0, 0x1f /* 32 byte rollback region */
+ xori k0, 0x1f
+ bne k0, k1, 9f
+ MTC0 k0, CP0_EPC
+9:
+ .set pop
+ .endm
+
.align 5
+BUILD_ROLLBACK_PROLOGUE handle_int
NESTED(handle_int, PT_SIZE, sp)
#ifdef CONFIG_TRACE_IRQFLAGS
/*
* This prototype is copied to ebase + n*IntCtl.VS and patched
* to invoke the handler
*/
+BUILD_ROLLBACK_PROLOGUE except_vec_vi
NESTED(except_vec_vi, 0, sp)
SAVE_SOME
SAVE_AT
and t0, a0, t1
#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
mfc0 t2, CP0_TCCONTEXT
- or t0, t0, t2
- mtc0 t0, CP0_TCCONTEXT
+ or t2, t0, t2
+ mtc0 t2, CP0_TCCONTEXT
#endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */
xor t1, t1, t0
mtc0 t1, CP0_STATUS
atomic_set(&kgdb_cpu_doing_single_step, -1);
if (remcom_in_buffer[0] == 's')
- if (kgdb_contthread)
- atomic_set(&kgdb_cpu_doing_single_step, cpu);
+ atomic_set(&kgdb_cpu_doing_single_step, cpu);
return 0;
}
/*
* FPU Use Factor empirically derived from experiments on 34K
*/
-#define FPUSEFACTOR 333
+#define FPUSEFACTOR 2000
static __init int mt_fp_affinity_init(void)
{
while (1) {
tick_nohz_stop_sched_tick(1);
while (!need_resched()) {
-#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
+#ifdef CONFIG_MIPS_MT_SMTC
extern void smtc_idle_loop_hook(void);
smtc_idle_loop_hook();
*/
p->thread.cp0_status = read_c0_status() & ~(ST0_CU2|ST0_CU1);
childregs->cp0_status &= ~(ST0_CU2|ST0_CU1);
- clear_tsk_thread_flag(p, TIF_USEDFPU);
-#ifdef CONFIG_MIPS_MT_FPAFF
+#ifdef CONFIG_MIPS_MT_SMTC
/*
- * FPU affinity support is cleaner if we track the
- * user-visible CPU affinity from the very beginning.
- * The generic cpus_allowed mask will already have
- * been copied from the parent before copy_thread
- * is invoked.
+ * SMTC restores TCStatus after Status, and the CU bits
+ * are aliased there.
*/
- p->thread.user_cpus_allowed = p->cpus_allowed;
+ childregs->cp0_tcstatus &= ~(ST0_CU2|ST0_CU1);
+#endif
+ clear_tsk_thread_flag(p, TIF_USEDFPU);
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+ clear_tsk_thread_flag(p, TIF_FPUBOUND);
#endif /* CONFIG_MIPS_MT_FPAFF */
if (clone_flags & CLONE_SETTLS)
case FPC_EIR: { /* implementation / version register */
unsigned int flags;
#ifdef CONFIG_MIPS_MT_SMTC
- unsigned int irqflags;
+ unsigned long irqflags;
unsigned int mtflags;
#endif /* CONFIG_MIPS_MT_SMTC */
static unsigned long __init init_initrd(void)
{
unsigned long end;
- u32 *initrd_header;
/*
* Board specific code or command line parser should have
* already set up initrd_start and initrd_end. In these cases
* perfom sanity checks and use them if all looks good.
*/
- if (initrd_start && initrd_end > initrd_start)
- goto sanitize;
+ if (!initrd_start || initrd_end <= initrd_start) {
+#ifdef CONFIG_PROBE_INITRD_HEADER
+ u32 *initrd_header;
- /*
- * See if initrd has been added to the kernel image by
- * arch/mips/boot/addinitrd.c. In that case a header is
- * prepended to initrd and is made up by 8 bytes. The fisrt
- * word is a magic number and the second one is the size of
- * initrd. Initrd start must be page aligned in any cases.
- */
- initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
- if (initrd_header[0] != 0x494E5244)
+ /*
+ * See if initrd has been added to the kernel image by
+ * arch/mips/boot/addinitrd.c. In that case a header is
+ * prepended to initrd and is made up by 8 bytes. The first
+ * word is a magic number and the second one is the size of
+ * initrd. Initrd start must be page aligned in any cases.
+ */
+ initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
+ if (initrd_header[0] != 0x494E5244)
+ goto disable;
+ initrd_start = (unsigned long)(initrd_header + 2);
+ initrd_end = initrd_start + initrd_header[1];
+#else
goto disable;
- initrd_start = (unsigned long)(initrd_header + 2);
- initrd_end = initrd_start + initrd_header[1];
+#endif
+ }
-sanitize:
if (initrd_start & ~PAGE_MASK) {
pr_err("initrd start must be page aligned\n");
goto disable;
-/* Copyright (C) 2004 Mips Technologies, Inc */
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2004 Mips Technologies, Inc
+ * Copyright (C) 2008 Kevin D. Kissell
+ */
#include <linux/clockchips.h>
#include <linux/kernel.h>
#include <asm/time.h>
#include <asm/addrspace.h>
#include <asm/smtc.h>
-#include <asm/smtc_ipi.h>
#include <asm/smtc_proc.h>
/*
asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
-/*
- * Clock interrupt "latch" buffers, per "CPU"
- */
-
-static atomic_t ipi_timer_latch[NR_CPUS];
/*
* Number of InterProcessor Interrupt (IPI) message buffers to allocate
#define IPIBUF_PER_CPU 4
-static struct smtc_ipi_q IPIQ[NR_CPUS];
+struct smtc_ipi_q IPIQ[NR_CPUS];
static struct smtc_ipi_q freeIPIq;
* phys_cpu_present_map and the logical/physical mappings.
*/
-int __init mipsmt_build_cpu_map(int start_cpu_slot)
+int __init smtc_build_cpu_map(int start_cpu_slot)
{
int i, ntcs;
write_tc_c0_tcstatus((read_tc_c0_tcstatus()
& ~(TCSTATUS_TKSU | TCSTATUS_DA | TCSTATUS_IXMT))
| TCSTATUS_A);
- write_tc_c0_tccontext(0);
+ /*
+ * TCContext gets an offset from the base of the IPIQ array
+ * to be used in low-level code to detect the presence of
+ * an active IPI queue
+ */
+ write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16);
/* Bind tc to vpe */
write_tc_c0_tcbind(vpe);
/* In general, all TCs should have the same cpu_data indications */
cpu_data[cpu].options &= ~MIPS_CPU_FPU;
cpu_data[cpu].vpe_id = vpe;
cpu_data[cpu].tc_id = tc;
+ /* Multi-core SMTC hasn't been tested, but be prepared */
+ cpu_data[cpu].core = (read_vpe_c0_ebase() >> 1) & 0xff;
}
+/*
+ * Tweak to get Count registes in as close a sync as possible.
+ * Value seems good for 34K-class cores.
+ */
+
+#define CP0_SKEW 8
-void mipsmt_prepare_cpus(void)
+void smtc_prepare_cpus(int cpus)
{
int i, vpe, tc, ntc, nvpe, tcpervpe[NR_CPUS], slop, cpu;
unsigned long flags;
IPIQ[i].head = IPIQ[i].tail = NULL;
spin_lock_init(&IPIQ[i].lock);
IPIQ[i].depth = 0;
- atomic_set(&ipi_timer_latch[i], 0);
}
/* cpu_data index starts at zero */
cpu = 0;
cpu_data[cpu].vpe_id = 0;
cpu_data[cpu].tc_id = 0;
+ cpu_data[cpu].core = (read_c0_ebase() >> 1) & 0xff;
cpu++;
/* Report on boot-time options */
write_vpe_c0_compare(0);
/* Propagate Config7 */
write_vpe_c0_config7(read_c0_config7());
- write_vpe_c0_count(read_c0_count());
+ write_vpe_c0_count(read_c0_count() + CP0_SKEW);
+ ehb();
}
/* enable multi-threading within VPE */
write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE);
void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle)
{
extern u32 kernelsp[NR_CPUS];
- long flags;
+ unsigned long flags;
int mtflags;
LOCK_MT_PRA();
void smtc_init_secondary(void)
{
- /*
- * Start timer on secondary VPEs if necessary.
- * plat_timer_setup has already have been invoked by init/main
- * on "boot" TC. Like per_cpu_trap_init() hack, this assumes that
- * SMTC init code assigns TCs consdecutively and in ascending order
- * to across available VPEs.
- */
- if (((read_c0_tcbind() & TCBIND_CURTC) != 0) &&
- ((read_c0_tcbind() & TCBIND_CURVPE)
- != cpu_data[smp_processor_id() - 1].vpe_id)){
- write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
- }
-
local_irq_enable();
}
void smtc_smp_finish(void)
{
+ int cpu = smp_processor_id();
+
+ /*
+ * Lowest-numbered CPU per VPE starts a clock tick.
+ * Like per_cpu_trap_init() hack, this assumes that
+ * SMTC init code assigns TCs consdecutively and
+ * in ascending order across available VPEs.
+ */
+ if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id))
+ write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
+
printk("TC %d going on-line as CPU %d\n",
cpu_data[smp_processor_id()].tc_id, smp_processor_id());
}
{
int tcstatus;
struct smtc_ipi *pipi;
- long flags;
+ unsigned long flags;
int mtflags;
+ unsigned long tcrestart;
+ extern void r4k_wait_irqoff(void), __pastwait(void);
if (cpu == smp_processor_id()) {
printk("Cannot Send IPI to self!\n");
pipi->arg = (void *)action;
pipi->dest = cpu;
if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
- if (type == SMTC_CLOCK_TICK)
- atomic_inc(&ipi_timer_latch[cpu]);
/* If not on same VPE, enqueue and send cross-VPE interrupt */
smtc_ipi_nq(&IPIQ[cpu], pipi);
LOCK_CORE_PRA();
if ((tcstatus & TCSTATUS_IXMT) != 0) {
/*
- * Spin-waiting here can deadlock,
- * so we queue the message for the target TC.
+ * If we're in the the irq-off version of the wait
+ * loop, we need to force exit from the wait and
+ * do a direct post of the IPI.
+ */
+ if (cpu_wait == r4k_wait_irqoff) {
+ tcrestart = read_tc_c0_tcrestart();
+ if (tcrestart >= (unsigned long)r4k_wait_irqoff
+ && tcrestart < (unsigned long)__pastwait) {
+ write_tc_c0_tcrestart(__pastwait);
+ tcstatus &= ~TCSTATUS_IXMT;
+ write_tc_c0_tcstatus(tcstatus);
+ goto postdirect;
+ }
+ }
+ /*
+ * Otherwise we queue the message for the target TC
+ * to pick up when he does a local_irq_restore()
*/
write_tc_c0_tchalt(0);
UNLOCK_CORE_PRA();
- /* Try to reduce redundant timer interrupt messages */
- if (type == SMTC_CLOCK_TICK) {
- if (atomic_postincrement(&ipi_timer_latch[cpu])!=0){
- smtc_ipi_nq(&freeIPIq, pipi);
- return;
- }
- }
smtc_ipi_nq(&IPIQ[cpu], pipi);
} else {
- if (type == SMTC_CLOCK_TICK)
- atomic_inc(&ipi_timer_latch[cpu]);
+postdirect:
post_direct_ipi(cpu, pipi);
write_tc_c0_tchalt(0);
UNLOCK_CORE_PRA();
smp_call_function_interrupt();
}
-DECLARE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device);
+DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
void ipi_decode(struct smtc_ipi *pipi)
{
struct clock_event_device *cd;
void *arg_copy = pipi->arg;
int type_copy = pipi->type;
- int ticks;
-
smtc_ipi_nq(&freeIPIq, pipi);
switch (type_copy) {
case SMTC_CLOCK_TICK:
irq_enter();
kstat_this_cpu.irqs[MIPS_CPU_IRQ_BASE + 1]++;
- cd = &per_cpu(smtc_dummy_clockevent_device, cpu);
- ticks = atomic_read(&ipi_timer_latch[cpu]);
- atomic_sub(ticks, &ipi_timer_latch[cpu]);
- while (ticks) {
- cd->event_handler(cd);
- ticks--;
- }
+ cd = &per_cpu(mips_clockevent_device, cpu);
+ cd->event_handler(cd);
irq_exit();
break;
}
}
+/*
+ * Similar to smtc_ipi_replay(), but invoked from context restore,
+ * so it reuses the current exception frame rather than set up a
+ * new one with self_ipi.
+ */
+
void deferred_smtc_ipi(void)
{
- struct smtc_ipi *pipi;
- unsigned long flags;
-/* DEBUG */
- int q = smp_processor_id();
+ int cpu = smp_processor_id();
/*
* Test is not atomic, but much faster than a dequeue,
* and the vast majority of invocations will have a null queue.
+ * If irq_disabled when this was called, then any IPIs queued
+ * after we test last will be taken on the next irq_enable/restore.
+ * If interrupts were enabled, then any IPIs added after the
+ * last test will be taken directly.
*/
- if (IPIQ[q].head != NULL) {
- while((pipi = smtc_ipi_dq(&IPIQ[q])) != NULL) {
- /* ipi_decode() should be called with interrupts off */
- local_irq_save(flags);
+
+ while (IPIQ[cpu].head != NULL) {
+ struct smtc_ipi_q *q = &IPIQ[cpu];
+ struct smtc_ipi *pipi;
+ unsigned long flags;
+
+ /*
+ * It may be possible we'll come in with interrupts
+ * already enabled.
+ */
+ local_irq_save(flags);
+
+ spin_lock(&q->lock);
+ pipi = __smtc_ipi_dq(q);
+ spin_unlock(&q->lock);
+ if (pipi != NULL)
ipi_decode(pipi);
- local_irq_restore(flags);
- }
+ /*
+ * The use of the __raw_local restore isn't
+ * as obviously necessary here as in smtc_ipi_replay(),
+ * but it's more efficient, given that we're already
+ * running down the IPI queue.
+ */
+ __raw_local_irq_restore(flags);
}
}
struct smtc_ipi *pipi;
unsigned long tcstatus;
int sent;
- long flags;
+ unsigned long flags;
unsigned int mtflags;
unsigned int vpflags;
/*
* SMTC-specific hacks invoked from elsewhere in the kernel.
- *
- * smtc_ipi_replay is called from raw_local_irq_restore which is only ever
- * called with interrupts disabled. We do rely on interrupts being disabled
- * here because using spin_lock_irqsave()/spin_unlock_irqrestore() would
- * result in a recursive call to raw_local_irq_restore().
*/
-static void __smtc_ipi_replay(void)
+ /*
+ * smtc_ipi_replay is called from raw_local_irq_restore
+ */
+
+void smtc_ipi_replay(void)
{
unsigned int cpu = smp_processor_id();
/*
* To the extent that we've ever turned interrupts off,
* we may have accumulated deferred IPIs. This is subtle.
- * If we use the smtc_ipi_qdepth() macro, we'll get an
- * exact number - but we'll also disable interrupts
- * and create a window of failure where a new IPI gets
- * queued after we test the depth but before we re-enable
- * interrupts. So long as IXMT never gets set, however,
* we should be OK: If we pick up something and dispatch
* it here, that's great. If we see nothing, but concurrent
* with this operation, another TC sends us an IPI, IXMT
* is clear, and we'll handle it as a real pseudo-interrupt
- * and not a pseudo-pseudo interrupt.
+ * and not a pseudo-pseudo interrupt. The important thing
+ * is to do the last check for queued message *after* the
+ * re-enabling of interrupts.
*/
- if (IPIQ[cpu].depth > 0) {
- while (1) {
- struct smtc_ipi_q *q = &IPIQ[cpu];
- struct smtc_ipi *pipi;
- extern void self_ipi(struct smtc_ipi *);
-
- spin_lock(&q->lock);
- pipi = __smtc_ipi_dq(q);
- spin_unlock(&q->lock);
- if (!pipi)
- break;
+ while (IPIQ[cpu].head != NULL) {
+ struct smtc_ipi_q *q = &IPIQ[cpu];
+ struct smtc_ipi *pipi;
+ unsigned long flags;
+
+ /*
+ * It's just possible we'll come in with interrupts
+ * already enabled.
+ */
+ local_irq_save(flags);
+
+ spin_lock(&q->lock);
+ pipi = __smtc_ipi_dq(q);
+ spin_unlock(&q->lock);
+ /*
+ ** But use a raw restore here to avoid recursion.
+ */
+ __raw_local_irq_restore(flags);
+ if (pipi) {
self_ipi(pipi);
smtc_cpu_stats[cpu].selfipis++;
}
}
}
-void smtc_ipi_replay(void)
-{
- raw_local_irq_disable();
- __smtc_ipi_replay();
-}
-
EXPORT_SYMBOL(smtc_ipi_replay);
void smtc_idle_loop_hook(void)
}
}
- /*
- * Now that we limit outstanding timer IPIs, check for hung TC
- */
- for (tc = 0; tc < NR_CPUS; tc++) {
- /* Don't check ourself - we'll dequeue IPIs just below */
- if ((tc != smp_processor_id()) &&
- atomic_read(&ipi_timer_latch[tc]) > timerq_limit) {
- if (clock_hang_reported[tc] == 0) {
- pdb_msg += sprintf(pdb_msg,
- "TC %d looks hung with timer latch at %d\n",
- tc, atomic_read(&ipi_timer_latch[tc]));
- clock_hang_reported[tc]++;
- }
- }
- }
emt(mtflags);
local_irq_restore(flags);
if (pdb_msg != &id_ho_db_msg[0])
printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg);
#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
- /*
- * Replay any accumulated deferred IPIs. If "Instant Replay"
- * is in use, there should never be any.
- */
-#ifndef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY
- {
- unsigned long flags;
-
- local_irq_save(flags);
- __smtc_ipi_replay();
- local_irq_restore(flags);
- }
-#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */
+ smtc_ipi_replay();
}
void smtc_soft_dump(void)
printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis);
}
smtc_ipi_qdump();
- printk("Timer IPI Backlogs:\n");
- for (i=0; i < NR_CPUS; i++) {
- printk("%d: %d\n", i, atomic_read(&ipi_timer_latch[i]));
- }
printk("%d Recoveries of \"stolen\" FPU\n",
atomic_read(&smtc_fpu_recoveries));
}
#include <asm/types.h>
#include <asm/stacktrace.h>
+extern void check_wait(void);
+extern asmlinkage void r4k_wait(void);
+extern asmlinkage void rollback_handle_int(void);
extern asmlinkage void handle_int(void);
extern asmlinkage void handle_tlbm(void);
extern asmlinkage void handle_tlbl(void);
do_exit(SIGSEGV);
}
-extern const struct exception_table_entry __start___dbe_table[];
-extern const struct exception_table_entry __stop___dbe_table[];
+extern struct exception_table_entry __start___dbe_table[];
+extern struct exception_table_entry __stop___dbe_table[];
__asm__(
" .section __dbe_table, \"a\"\n"
if (cpus_intersects(current->cpus_allowed, mt_fpu_cpumask)) {
cpumask_t tmask;
- cpus_and(tmask, current->thread.user_cpus_allowed,
- mt_fpu_cpumask);
+ current->thread.user_cpus_allowed
+ = current->cpus_allowed;
+ cpus_and(tmask, current->cpus_allowed,
+ mt_fpu_cpumask);
set_cpus_allowed(current, tmask);
set_thread_flag(TIF_FPUBOUND);
}
if (n == 0 && cpu_has_divec) {
*(u32 *)(ebase + 0x200) = 0x08000000 |
(0x03ffffff & (handler >> 2));
- flush_icache_range(ebase + 0x200, ebase + 0x204);
+ local_flush_icache_range(ebase + 0x200, ebase + 0x204);
}
return (void *)old_handler;
}
extern char except_vec_vi, except_vec_vi_lui;
extern char except_vec_vi_ori, except_vec_vi_end;
+ extern char rollback_except_vec_vi;
+ char *vec_start = (cpu_wait == r4k_wait) ?
+ &rollback_except_vec_vi : &except_vec_vi;
#ifdef CONFIG_MIPS_MT_SMTC
/*
* We need to provide the SMTC vectored interrupt handler
* Status.IM bit to be masked before going there.
*/
extern char except_vec_vi_mori;
- const int mori_offset = &except_vec_vi_mori - &except_vec_vi;
+ const int mori_offset = &except_vec_vi_mori - vec_start;
#endif /* CONFIG_MIPS_MT_SMTC */
- const int handler_len = &except_vec_vi_end - &except_vec_vi;
- const int lui_offset = &except_vec_vi_lui - &except_vec_vi;
- const int ori_offset = &except_vec_vi_ori - &except_vec_vi;
+ const int handler_len = &except_vec_vi_end - vec_start;
+ const int lui_offset = &except_vec_vi_lui - vec_start;
+ const int ori_offset = &except_vec_vi_ori - vec_start;
if (handler_len > VECTORSPACING) {
/*
panic("VECTORSPACING too small");
}
- memcpy(b, &except_vec_vi, handler_len);
+ memcpy(b, vec_start, handler_len);
#ifdef CONFIG_MIPS_MT_SMTC
BUG_ON(n > 7); /* Vector index %d exceeds SMTC maximum. */
*w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff);
w = (u32 *)(b + ori_offset);
*w = (*w & 0xffff0000) | ((u32)handler & 0xffff);
- flush_icache_range((unsigned long)b, (unsigned long)(b+handler_len));
+ local_flush_icache_range((unsigned long)b,
+ (unsigned long)(b+handler_len));
}
else {
/*
w = (u32 *)b;
*w++ = 0x08000000 | (((u32)handler >> 2) & 0x03fffff); /* j handler */
*w = 0;
- flush_icache_range((unsigned long)b, (unsigned long)(b+8));
+ local_flush_icache_range((unsigned long)b,
+ (unsigned long)(b+8));
}
return (void *)old_handler;
void __init set_handler(unsigned long offset, void *addr, unsigned long size)
{
memcpy((void *)(ebase + offset), addr, size);
- flush_icache_range(ebase + offset, ebase + offset + size);
+ local_flush_icache_range(ebase + offset, ebase + offset + size);
}
static char panic_null_cerr[] __cpuinitdata =
extern char except_vec3_generic, except_vec3_r4000;
extern char except_vec4;
unsigned long i;
+ int rollback;
+
+ check_wait();
+ rollback = (cpu_wait == r4k_wait);
#if defined(CONFIG_KGDB)
if (kgdb_early_setup)
if (board_be_init)
board_be_init();
- set_except_vector(0, handle_int);
+ set_except_vector(0, rollback ? rollback_handle_int : handle_int);
set_except_vector(1, handle_tlbm);
set_except_vector(2, handle_tlbl);
set_except_vector(3, handle_tlbs);
signal32_init();
#endif
- flush_icache_range(ebase, ebase + 0x400);
+ local_flush_icache_range(ebase, ebase + 0x400);
flush_tlb_handlers();
+
+ sort_extable(__start___dbe_table, __stop___dbe_table);
}
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
+ *(.text.*)
*(.fixup)
*(.gnu.warning)
} :text = 0
#ifdef USE_DOUBLE
#define LOAD ld
+#define LOAD32 lwu
#define ADD daddu
#define NBYTES 8
#else
#define LOAD lw
+#define LOAD32 lw
#define ADD addu
#define NBYTES 4
ADD sum, v1; \
.set pop
+#define ADDC32(sum,reg) \
+ .set push; \
+ .set noat; \
+ addu sum, reg; \
+ sltu v1, sum, reg; \
+ addu sum, v1; \
+ .set pop
+
#define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3) \
LOAD _t0, (offset + UNIT(0))(src); \
LOAD _t1, (offset + UNIT(1))(src); \
beqz t8, .Lqword_align
andi t8, src, 0x8
- lw t0, 0x00(src)
+ LOAD32 t0, 0x00(src)
LONG_SUBU a1, a1, 0x4
ADDC(sum, t0)
PTR_ADDU src, src, 0x4
LONG_SRL t8, t8, 0x2
.Lend_words:
- lw t0, (src)
+ LOAD32 t0, (src)
LONG_SUBU t8, t8, 0x1
ADDC(sum, t0)
.set reorder /* DADDI_WAR */
/* Still a full word to go */
ulw t1, (src)
PTR_ADDIU src, 4
+#ifdef USE_DOUBLE
+ dsll t1, t1, 32 /* clear lower 32bit */
+#endif
ADDC(sum, t1)
1: move t1, zero
1:
.set reorder
/* Add the passed partial csum. */
- ADDC(sum, a2)
+ ADDC32(sum, a2)
jr ra
.set noreorder
END(csum_partial)
.set pop
1:
.set reorder
- ADDC(sum, psum)
+ ADDC32(sum, psum)
jr ra
.set noreorder
flush_cache_range = r3k_flush_cache_range;
flush_cache_page = r3k_flush_cache_page;
flush_icache_range = r3k_flush_icache_range;
+ local_flush_icache_range = r3k_flush_icache_range;
flush_cache_sigtramp = r3k_flush_cache_sigtramp;
local_flush_data_cache_page = local_r3k_flush_data_cache_page;
unsigned long end;
};
-static inline void local_r4k_flush_icache_range(void *args)
+static inline void local_r4k_flush_icache_range(unsigned long start, unsigned long end)
{
- struct flush_icache_range_args *fir_args = args;
- unsigned long start = fir_args->start;
- unsigned long end = fir_args->end;
-
if (!cpu_has_ic_fills_f_dc) {
if (end - start >= dcache_size) {
r4k_blast_dcache();
protected_blast_icache_range(start, end);
}
+static inline void local_r4k_flush_icache_range_ipi(void *args)
+{
+ struct flush_icache_range_args *fir_args = args;
+ unsigned long start = fir_args->start;
+ unsigned long end = fir_args->end;
+
+ local_r4k_flush_icache_range(start, end);
+}
+
static void r4k_flush_icache_range(unsigned long start, unsigned long end)
{
struct flush_icache_range_args args;
args.start = start;
args.end = end;
- r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1);
+ r4k_on_each_cpu(local_r4k_flush_icache_range_ipi, &args, 1);
instruction_hazard();
}
local_flush_data_cache_page = local_r4k_flush_data_cache_page;
flush_data_cache_page = r4k_flush_data_cache_page;
flush_icache_range = r4k_flush_icache_range;
+ local_flush_icache_range = local_r4k_flush_icache_range;
#if defined(CONFIG_DMA_NONCOHERENT)
if (coherentio) {
flush_cache_range = (void *) tx39h_flush_icache_all;
flush_cache_page = (void *) tx39h_flush_icache_all;
flush_icache_range = (void *) tx39h_flush_icache_all;
+ local_flush_icache_range = (void *) tx39h_flush_icache_all;
flush_cache_sigtramp = (void *) tx39h_flush_icache_all;
local_flush_data_cache_page = (void *) tx39h_flush_icache_all;
flush_cache_range = tx39_flush_cache_range;
flush_cache_page = tx39_flush_cache_page;
flush_icache_range = tx39_flush_icache_range;
+ local_flush_icache_range = tx39_flush_icache_range;
flush_cache_sigtramp = tx39_flush_cache_sigtramp;
local_flush_data_cache_page = local_tx39_flush_data_cache_page;
void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
unsigned long pfn);
void (*flush_icache_range)(unsigned long start, unsigned long end);
+void (*local_flush_icache_range)(unsigned long start, unsigned long end);
void (*__flush_cache_vmap)(void);
void (*__flush_cache_vunmap)(void);
void __cpuinit flush_tlb_handlers(void)
{
- flush_icache_range((unsigned long)handle_tlbl,
+ local_flush_icache_range((unsigned long)handle_tlbl,
(unsigned long)handle_tlbl + sizeof(handle_tlbl));
- flush_icache_range((unsigned long)handle_tlbs,
+ local_flush_icache_range((unsigned long)handle_tlbs,
(unsigned long)handle_tlbs + sizeof(handle_tlbs));
- flush_icache_range((unsigned long)handle_tlbm,
+ local_flush_icache_range((unsigned long)handle_tlbm,
(unsigned long)handle_tlbm + sizeof(handle_tlbm));
}
obj-$(CONFIG_PCI) += malta-pci.o
# FIXME FIXME FIXME
-obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o
+obj-$(CONFIG_MIPS_MT_SMTC) += malta-smtc.o
EXTRA_CFLAGS += -Werror
static void __init msmtc_smp_setup(void)
{
- mipsmt_build_cpu_map(0);
+ /*
+ * we won't get the definitive value until
+ * we've run smtc_prepare_cpus later, but
+ * we would appear to need an upper bound now.
+ */
+ smp_num_siblings = smtc_build_cpu_map(0);
}
static void __init msmtc_prepare_cpus(unsigned int max_cpus)
{
- mipsmt_prepare_cpus();
+ smtc_prepare_cpus(max_cpus);
}
struct plat_smp_ops msmtc_smp_ops = {
obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
+obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
#
# These are still pretty much in the old state, watch, go blind.
--- /dev/null
+/*
+ * Copyright (C) 2008 Aurelien Jarno <aurelien@aurel32.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/ssb/ssb.h>
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return 0;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ int res;
+ u8 slot, pin;
+
+ res = ssb_pcibios_plat_dev_init(dev);
+ if (res < 0) {
+ printk(KERN_ALERT "PCI: Failed to init device %s\n",
+ pci_name(dev));
+ return res;
+ }
+
+ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ slot = PCI_SLOT(dev->devfn);
+ res = ssb_pcibios_map_irq(dev, slot, pin);
+
+ /* IRQ-0 and IRQ-1 are software interrupts. */
+ if (res < 2) {
+ printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n",
+ pci_name(dev));
+ return res;
+ }
+
+ dev->irq = res;
+ return 0;
+}
+
* on any one of the hubs connected to its xbow.
*/
int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return 0;
+}
+
+/* Most MIPS systems have straight-forward swizzling needs. */
+static inline u8 bridge_swizzle(u8 pin, u8 slot)
+{
+ return (((pin - 1) + slot) % 4) + 1;
+}
+
+static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev)
+{
+ while (dev->bus->parent) {
+ /* Move up the chain of bridges. */
+ dev = dev->bus->self;
+ }
+
+ return dev;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
{
struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
- int irq = bc->pci_int[slot];
+ struct pci_dev *rdev = bridge_root_dev(dev);
+ int slot = PCI_SLOT(rdev->devfn);
+ int irq;
+ irq = bc->pci_int[slot];
if (irq == -1) {
- irq = bc->pci_int[slot] = request_bridge_irq(bc);
+ irq = request_bridge_irq(bc);
if (irq < 0)
- panic("Can't allocate interrupt for PCI device %s\n",
- pci_name(dev));
+ return irq;
+
+ bc->pci_int[slot] = irq;
}
irq_to_bridge[irq] = bc;
irq_to_slot[irq] = slot;
- return irq;
-}
+ dev->irq = irq;
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
return 0;
}
return res;
/* Second HPC is missing? */
- if (!ip22_is_fullhouse() ||
+ if (ip22_is_fullhouse() ||
get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1]))
return 0;
txx9_ce_res[i].name = txx9_ce_res_name[i];
}
+ txx9_pcode = pcode;
sprintf(txx9_pcode_str, "TX%x", pcode);
if (base) {
txx9_reg_res.start = base & 0xfffffffffULL;
cascade = irq_cascade + irq;
if (cascade->get_irq != NULL) {
unsigned int source_irq = irq;
+ int ret;
desc = irq_desc + source_irq;
if (desc->chip->mask_ack)
desc->chip->mask_ack(source_irq);
desc->chip->mask(source_irq);
desc->chip->ack(source_irq);
}
- irq = cascade->get_irq(irq);
- if (irq < 0)
+ ret = cascade->get_irq(irq);
+ irq = ret;
+ if (ret < 0)
atomic_inc(&irq_err_count);
else
irq_dispatch(irq);
atomic_t irq_err_count;
/*
- * MN10300 INTC controller operations
+ * MN10300 interrupt controller operations
*/
-static void mn10300_cpupic_disable(unsigned int irq)
-{
- u16 tmp = GxICR(irq);
- GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT;
- tmp = GxICR(irq);
-}
-
-static void mn10300_cpupic_enable(unsigned int irq)
-{
- u16 tmp = GxICR(irq);
- GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
- tmp = GxICR(irq);
-}
-
static void mn10300_cpupic_ack(unsigned int irq)
{
u16 tmp;
static void mn10300_cpupic_unmask(unsigned int irq)
{
u16 tmp = GxICR(irq);
- GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT;
+ GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
tmp = GxICR(irq);
}
-static void mn10300_cpupic_end(unsigned int irq)
+static void mn10300_cpupic_unmask_clear(unsigned int irq)
{
+ /* the MN10300 PIC latches its interrupt request bit, even after the
+ * device has ceased to assert its interrupt line and the interrupt
+ * channel has been disabled in the PIC, so for level-triggered
+ * interrupts we need to clear the request bit when we re-enable */
u16 tmp = GxICR(irq);
- GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
+ GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT;
tmp = GxICR(irq);
}
-static struct irq_chip mn10300_cpu_pic = {
- .name = "cpu",
- .disable = mn10300_cpupic_disable,
- .enable = mn10300_cpupic_enable,
+/*
+ * MN10300 PIC level-triggered IRQ handling.
+ *
+ * The PIC has no 'ACK' function per se. It is possible to clear individual
+ * channel latches, but each latch relatches whether or not the channel is
+ * masked, so we need to clear the latch when we unmask the channel.
+ *
+ * Also for this reason, we don't supply an ack() op (it's unused anyway if
+ * mask_ack() is provided), and mask_ack() just masks.
+ */
+static struct irq_chip mn10300_cpu_pic_level = {
+ .name = "cpu_l",
+ .disable = mn10300_cpupic_mask,
+ .enable = mn10300_cpupic_unmask_clear,
+ .ack = NULL,
+ .mask = mn10300_cpupic_mask,
+ .mask_ack = mn10300_cpupic_mask,
+ .unmask = mn10300_cpupic_unmask_clear,
+};
+
+/*
+ * MN10300 PIC edge-triggered IRQ handling.
+ *
+ * We use the latch clearing function of the PIC as the 'ACK' function.
+ */
+static struct irq_chip mn10300_cpu_pic_edge = {
+ .name = "cpu_e",
+ .disable = mn10300_cpupic_mask,
+ .enable = mn10300_cpupic_unmask,
.ack = mn10300_cpupic_ack,
.mask = mn10300_cpupic_mask,
.mask_ack = mn10300_cpupic_mask_ack,
.unmask = mn10300_cpupic_unmask,
- .end = mn10300_cpupic_end,
};
/*
*/
void set_intr_postackable(int irq)
{
- set_irq_handler(irq, handle_level_irq);
+ set_irq_chip_and_handler(irq, &mn10300_cpu_pic_level,
+ handle_level_irq);
}
/*
for (irq = 0; irq < NR_IRQS; irq++)
if (irq_desc[irq].chip == &no_irq_type)
- set_irq_chip_and_handler(irq, &mn10300_cpu_pic,
- handle_edge_irq);
+ /* due to the PIC latching interrupt requests, even
+ * when the IRQ is disabled, IRQ_PENDING is superfluous
+ * and we can use handle_level_irq() for edge-triggered
+ * interrupts */
+ set_irq_chip_and_handler(irq, &mn10300_cpu_pic_edge,
+ handle_level_irq);
unit_init_IRQ();
}
/* MN10300 Low level time management
*
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2007-2008 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
* - Derived from arch/i386/kernel/time.c
*
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/profile.h>
+#include <linux/cnt32_to_63.h>
#include <asm/irq.h>
#include <asm/div64.h>
#include <asm/processor.h>
.name = "timer",
};
+static unsigned long sched_clock_multiplier;
+
/*
* scheduler clock - returns current time in nanosec units.
*/
unsigned long long sched_clock(void)
{
union {
- unsigned long long l;
- u32 w[2];
- } quot;
+ unsigned long long ll;
+ unsigned l[2];
+ } tsc64, result;
+ unsigned long tsc, tmp;
+ unsigned product[3]; /* 96-bit intermediate value */
+
+ /* read the TSC value
+ */
+ tsc = 0 - get_cycles(); /* get_cycles() counts down */
- quot.w[0] = mn10300_last_tsc - get_cycles();
- quot.w[1] = 1000000000;
+ /* expand to 64-bits.
+ * - sched_clock() must be called once a minute or better or the
+ * following will go horribly wrong - see cnt32_to_63()
+ */
+ tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL;
- asm("mulu %2,%3,%0,%1"
- : "=r"(quot.w[1]), "=r"(quot.w[0])
- : "0"(quot.w[1]), "1"(quot.w[0])
+ /* scale the 64-bit TSC value to a nanosecond value via a 96-bit
+ * intermediate
+ */
+ asm("mulu %2,%0,%3,%0 \n" /* LSW * mult -> 0:%3:%0 */
+ "mulu %2,%1,%2,%1 \n" /* MSW * mult -> %2:%1:0 */
+ "add %3,%1 \n"
+ "addc 0,%2 \n" /* result in %2:%1:%0 */
+ : "=r"(product[0]), "=r"(product[1]), "=r"(product[2]), "=r"(tmp)
+ : "0"(tsc64.l[0]), "1"(tsc64.l[1]), "2"(sched_clock_multiplier)
: "cc");
- do_div(quot.l, MN10300_TSCCLK);
+ result.l[0] = product[1] << 16 | product[0] >> 16;
+ result.l[1] = product[2] << 16 | product[1] >> 16;
- return quot.l;
+ return result.ll;
+}
+
+/*
+ * initialise the scheduler clock
+ */
+static void __init mn10300_sched_clock_init(void)
+{
+ sched_clock_multiplier =
+ __muldiv64u(NSEC_PER_SEC, 1 << 16, MN10300_TSCCLK);
}
/*
/* start the watchdog timer */
watchdog_go();
#endif
+
+ mn10300_sched_clock_init();
}
* If we're in an interrupt or have no user
* context, we must not take the fault..
*/
- if (in_interrupt() || !mm)
+ if (in_atomic() || !mm)
goto no_context;
down_read(&mm->mmap_sem);
switch (GET_XIRQ_TRIGGER(extnum)) {
case XIRQ_TRIGGER_HILEVEL:
case XIRQ_TRIGGER_LOWLEVEL:
- set_irq_handler(XIRQ2IRQ(extnum), handle_level_irq);
+ set_intr_postackable(XIRQ2IRQ(extnum));
break;
default:
break;
switch (GET_XIRQ_TRIGGER(extnum)) {
case XIRQ_TRIGGER_HILEVEL:
case XIRQ_TRIGGER_LOWLEVEL:
- set_irq_handler(XIRQ2IRQ(extnum), handle_level_irq);
+ set_intr_postackable(XIRQ2IRQ(extnum));
break;
default:
break;
buf->count -= reclen;
return 0;
Efault:
- buffer->error = -EFAULT;
+ buf->error = -EFAULT;
return -EFAULT;
}
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/bug.h>
+#include <linux/uaccess.h>
+#include <asm/sections.h>
#include <asm/unwind.h>
#if 0
deregister_unwind_table(mod);
module_bug_cleanup(mod);
}
+
+#ifdef CONFIG_64BIT
+void *dereference_function_descriptor(void *ptr)
+{
+ Elf64_Fdesc *desc = ptr;
+ void *p;
+
+ if (!probe_kernel_address(&desc->addr, p))
+ ptr = p;
+ return ptr;
+}
+#endif
KBUILD_CFLAGS += -mcpu=powerpc
endif
+# Work around a gcc code-gen bug with -fno-omit-frame-pointer.
+ifeq ($(CONFIG_FTRACE),y)
+KBUILD_CFLAGS += -mno-sched-epilog
+endif
+
cpu-as-$(CONFIG_4xx) += -Wa,-m405
cpu-as-$(CONFIG_6xx) += -Wa,-maltivec
cpu-as-$(CONFIG_POWER4) += -Wa,-maltivec
zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
zliblinuxheader := zlib.h zconf.h zutil.h
-$(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \
+$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
image-$(CONFIG_PPC_CHRP) += zImage.chrp
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
image-$(CONFIG_PPC_PMAC) += zImage.pmac
-image-$(CONFIG_PPC_HOLLY) += zImage.holly
+image-$(CONFIG_PPC_HOLLY) += dtbImage.holly
image-$(CONFIG_PPC_PRPMC2800) += dtbImage.prpmc2800
image-$(CONFIG_PPC_ISERIES) += zImage.iseries
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
reg = <0x00007400 0x00000400>;
big-endian;
};
+ };
- pci@1000 {
- device_type = "pci";
- compatible = "tsi109-pci", "tsi108-pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0x00001000 0x00001000>;
- bus-range = <0x0 0x0>;
- /*----------------------------------------------------+
- | PCI memory range.
- | 01 denotes I/O space
- | 02 denotes 32-bit memory space
- +----------------------------------------------------*/
- ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000
- 0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>;
- clock-frequency = <133333332>;
- interrupt-parent = <&MPIC>;
+ pci@c0001000 {
+ device_type = "pci";
+ compatible = "tsi109-pci", "tsi108-pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xc0001000 0x00001000>;
+ bus-range = <0x0 0x0>;
+ /*----------------------------------------------------+
+ | PCI memory range.
+ | 01 denotes I/O space
+ | 02 denotes 32-bit memory space
+ +----------------------------------------------------*/
+ ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000
+ 0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>;
+ clock-frequency = <133333332>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <0x17 0x2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ /*----------------------------------------------------+
+ | The INTA, INTB, INTC, INTD are shared.
+ +----------------------------------------------------*/
+ interrupt-map = <
+ 0x800 0x0 0x0 0x1 &RT0 0x24 0x0
+ 0x800 0x0 0x0 0x2 &RT0 0x25 0x0
+ 0x800 0x0 0x0 0x3 &RT0 0x26 0x0
+ 0x800 0x0 0x0 0x4 &RT0 0x27 0x0
+
+ 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
+ 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
+ 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
+ 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
+
+ 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
+ 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
+ 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
+ 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
+
+ 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
+ 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
+ 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
+ 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
+ >;
+
+ RT0: router@1180 {
+ device_type = "pic-router";
+ interrupt-controller;
+ big-endian;
+ clock-frequency = <0>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
interrupts = <0x17 0x2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- /*----------------------------------------------------+
- | The INTA, INTB, INTC, INTD are shared.
- +----------------------------------------------------*/
- interrupt-map = <
- 0x800 0x0 0x0 0x1 &RT0 0x24 0x0
- 0x800 0x0 0x0 0x2 &RT0 0x25 0x0
- 0x800 0x0 0x0 0x3 &RT0 0x26 0x0
- 0x800 0x0 0x0 0x4 &RT0 0x27 0x0
-
- 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
- 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
- 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
- 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
-
- 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
- 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
- 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
- 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
-
- 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
- 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
- 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
- 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
- >;
-
- RT0: router@1180 {
- device_type = "pic-router";
- interrupt-controller;
- big-endian;
- clock-frequency = <0>;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- interrupts = <0x17 0x2>;
- interrupt-parent = <&MPIC>;
- };
+ interrupt-parent = <&MPIC>;
};
};
cell-index = <0>;
reg = <0x0 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <60 2>;
+ interrupts = <76 2>;
};
dma-channel@1 {
compatible = "fsl,mpc8610-dma-channel",
cell-index = <1>;
reg = <0x80 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <61 2>;
+ interrupts = <77 2>;
};
dma-channel@2 {
compatible = "fsl,mpc8610-dma-channel",
cell-index = <2>;
reg = <0x100 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <62 2>;
+ interrupts = <78 2>;
};
dma-channel@3 {
compatible = "fsl,mpc8610-dma-channel",
cell-index = <3>;
reg = <0x180 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <63 2>;
+ interrupts = <79 2>;
};
};
uint scc_tcrc; /* Internal */
} sccp_t;
+/* Function code bits.
+*/
+#define SCC_EB ((u_char) 0x10) /* Set big endian byte order */
+#define SCC_GBL ((u_char) 0x20) /* Snooping enabled */
+
/* CPM Ethernet through SCC1.
*/
typedef struct scc_enet {
/* Keep this the last entry. */
#define R_PPC64_NUM 107
+/* There's actually a third entry here, but it's unused */
+struct ppc64_opd_entry
+{
+ unsigned long funcaddr;
+ unsigned long r2;
+};
+
#ifdef __KERNEL__
#ifdef CONFIG_SPU_BASE
#define __S110 PAGE_SHARED_X
#define __S111 PAGE_SHARED_X
-#ifdef CONFIG_HUGETLB_PAGE
-
+#ifdef CONFIG_PPC_MM_SLICES
#define HAVE_ARCH_UNMAPPED_AREA
#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
-
-#endif
+#endif /* CONFIG_PPC_MM_SLICES */
#ifndef __ASSEMBLY__
#define _ASM_POWERPC_SECTIONS_H
#ifdef __KERNEL__
+#include <linux/elf.h>
+#include <linux/uaccess.h>
#include <asm-generic/sections.h>
#ifdef __powerpc64__
return 0;
}
+#undef dereference_function_descriptor
+static inline void *dereference_function_descriptor(void *ptr)
+{
+ struct ppc64_opd_entry *desc = ptr;
+ void *p;
+
+ if (!probe_kernel_address(&desc->funcaddr, p))
+ ptr = p;
+ return ptr;
+}
+
#endif
#endif /* __KERNEL__ */
ifdef CONFIG_FTRACE
# Do not trace early boot code
-CFLAGS_REMOVE_cputable.o = -pg
-CFLAGS_REMOVE_prom_init.o = -pg
+CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog
ifdef CONFIG_DYNAMIC_FTRACE
# dynamic ftrace setup.
-CFLAGS_REMOVE_ftrace.o = -pg
+CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog
endif
endif
unsigned int flags, unsigned int length)
{
char *ptr = (char *) ¤t->thread.TS_FPR(reg);
- int ret;
+ int ret = 0;
flush_vsx_to_thread(current);
#include <asm/smp.h>
#ifdef CONFIG_HOTPLUG_CPU
-/* this is used for software suspend, and that shuts down
- * CPUs even while the system is still booting... */
-#define cpu_should_die() (cpu_is_offline(smp_processor_id()) && \
- (system_state == SYSTEM_RUNNING \
- || system_state == SYSTEM_BOOTING))
+#define cpu_should_die() cpu_is_offline(smp_processor_id())
#else
#define cpu_should_die() 0
#endif
stw r9,_NIP(r11) /* make it do a blr */
#ifdef CONFIG_SMP
- mfspr r12,SPRN_SPRG3
+ rlwinm r12,r11,0,0,31-THREAD_SHIFT
lwz r11,TI_CPU(r12) /* get cpu number * 4 */
slwi r11,r11,2
#else
stw r9,_NIP(r11) /* make it do a blr */
#ifdef CONFIG_SMP
- mfspr r12,SPRN_SPRG3
+ rlwinm r12,r1,0,0,31-THREAD_SHIFT
lwz r11,TI_CPU(r12) /* get cpu number * 4 */
slwi r11,r11,2
#else
li r11,0
#endif
+
b transfer_to_handler_cont
linux_regs->msr |= MSR_SE;
#endif
kgdb_single_step = 1;
- if (kgdb_contthread)
- atomic_set(&kgdb_cpu_doing_single_step,
- raw_smp_processor_id());
+ atomic_set(&kgdb_cpu_doing_single_step,
+ raw_smp_processor_id());
}
return 0;
}
#include <linux/vmalloc.h>
#include <linux/bug.h>
#include <asm/module.h>
-#include <asm/uaccess.h>
#include <asm/firmware.h>
#include <asm/code-patching.h>
#include <linux/sort.h>
#define DEBUGP(fmt , ...)
#endif
-/* There's actually a third entry here, but it's unused */
-struct ppc64_opd_entry
-{
- unsigned long funcaddr;
- unsigned long r2;
-};
-
/* Like PPC32, we need little trampolines to do > 24-bit jumps (into
the kernel itself). But on PPC64, these need to be used for every
jump, actually, to reset r2 (TOC+0x8000). */
__got2_end = .;
#endif /* CONFIG_PPC32 */
- . = ALIGN(PAGE_SIZE);
- _etext = .;
- PROVIDE32 (etext = .);
} :kernel
+ . = ALIGN(PAGE_SIZE);
+ _etext = .;
+ PROVIDE32 (etext = .);
+
/* Read-only data */
RODATA
unsigned long hash, hpteg;
unsigned long vsid = get_kernel_vsid(vaddr, ssize);
unsigned long va = hpt_va(vaddr, vsid, ssize);
+ unsigned long tprot = prot;
+
+ /* Make kernel text executable */
+ if (in_kernel_text(vaddr))
+ tprot &= ~HPTE_R_N;
hash = hpt_hash(va, shift, ssize);
hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
BUG_ON(!ppc_md.hpte_insert);
- ret = ppc_md.hpte_insert(hpteg, va, paddr, prot,
+ ret = ppc_md.hpte_insert(hpteg, va, paddr, tprot,
HPTE_V_BOLTED, psize, ssize);
if (ret < 0)
{
unsigned long table;
unsigned long pteg_count;
- unsigned long prot, tprot;
+ unsigned long prot;
unsigned long base = 0, size = 0, limit;
int i;
for (i=0; i < lmb.memory.cnt; i++) {
base = (unsigned long)__va(lmb.memory.region[i].base);
size = lmb.memory.region[i].size;
- tprot = prot | (in_kernel_text(base) ? _PAGE_EXEC : 0);
DBG("creating mapping for region: %lx..%lx (prot: %x)\n",
- base, size, tprot);
+ base, size, prot);
#ifdef CONFIG_U3_DART
/* Do not map the DART space. Fortunately, it will be aligned
unsigned long dart_table_end = dart_tablebase + 16 * MB;
if (base != dart_tablebase)
BUG_ON(htab_bolt_mapping(base, dart_tablebase,
- __pa(base), tprot,
+ __pa(base), prot,
mmu_linear_psize,
mmu_kernel_ssize));
if ((base + size) > dart_table_end)
BUG_ON(htab_bolt_mapping(dart_tablebase+16*MB,
base + size,
__pa(dart_table_end),
- tprot,
+ prot,
mmu_linear_psize,
mmu_kernel_ssize));
continue;
}
#endif /* CONFIG_U3_DART */
BUG_ON(htab_bolt_mapping(base, base + size, __pa(base),
- tprot, mmu_linear_psize, mmu_kernel_ssize));
+ prot, mmu_linear_psize, mmu_kernel_ssize));
}
/*
!(tmp->flags & SPU_CREATE_NOSCHED) &&
(!victim || tmp->prio > victim->prio)) {
victim = spu->ctx;
- get_spu_context(victim);
}
}
+ if (victim)
+ get_spu_context(victim);
mutex_unlock(&cbe_spu_info[node].list_mutex);
if (victim) {
/* not a candidate for interruptible because it's called either
from the scheduler thread or from spu_deactivate */
mutex_lock(&ctx->state_mutex);
- __spu_schedule(spu, ctx);
+ if (ctx->state == SPU_STATE_SAVED)
+ __spu_schedule(spu, ctx);
spu_release(ctx);
}
-static void spu_unschedule(struct spu *spu, struct spu_context *ctx)
+/**
+ * spu_unschedule - remove a context from a spu, and possibly release it.
+ * @spu: The SPU to unschedule from
+ * @ctx: The context currently scheduled on the SPU
+ * @free_spu Whether to free the SPU for other contexts
+ *
+ * Unbinds the context @ctx from the SPU @spu. If @free_spu is non-zero, the
+ * SPU is made available for other contexts (ie, may be returned by
+ * spu_get_idle). If this is zero, the caller is expected to schedule another
+ * context to this spu.
+ *
+ * Should be called with ctx->state_mutex held.
+ */
+static void spu_unschedule(struct spu *spu, struct spu_context *ctx,
+ int free_spu)
{
int node = spu->node;
mutex_lock(&cbe_spu_info[node].list_mutex);
cbe_spu_info[node].nr_active--;
- spu->alloc_state = SPU_FREE;
+ if (free_spu)
+ spu->alloc_state = SPU_FREE;
spu_unbind_context(spu, ctx);
ctx->stats.invol_ctx_switch++;
spu->stats.invol_ctx_switch++;
if (spu) {
new = grab_runnable_context(max_prio, spu->node);
if (new || force) {
- spu_unschedule(spu, ctx);
+ spu_unschedule(spu, ctx, new == NULL);
if (new) {
if (new->flags & SPU_CREATE_NOSCHED)
wake_up(&new->stop_wq);
new = grab_runnable_context(ctx->prio + 1, spu->node);
if (new) {
- spu_unschedule(spu, ctx);
+ spu_unschedule(spu, ctx, 0);
if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
spu_add_to_rq(ctx);
} else {
int i;
u8 *dummy;
struct pci_bus *bus = dev->bus;
+ resource_size_t end = 0;
+
+ for (i = PCI_BRIDGE_RESOURCES; i < PCI_BRIDGE_RESOURCES+3; i++) {
+ unsigned long flags = pci_resource_flags(dev, i);
+ if ((flags & (IORESOURCE_MEM|IORESOURCE_PREFETCH)) == IORESOURCE_MEM)
+ end = pci_resource_end(dev, i);
+ }
for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
if ((bus->resource[i]) &&
(bus->resource[i]->flags & IORESOURCE_MEM)) {
- dummy = ioremap(bus->resource[i]->end - 3, 0x4);
+ if (bus->resource[i]->end == end)
+ dummy = ioremap(bus->resource[i]->start, 0x4);
+ else
+ dummy = ioremap(bus->resource[i]->end - 3, 0x4);
if (dummy) {
in_8(dummy);
iounmap(dummy);
ifdef CONFIG_FTRACE
# Do not trace early boot code
-CFLAGS_REMOVE_bootx_init.o = -pg
+CFLAGS_REMOVE_bootx_init.o = -pg -mno-sched-epilog
endif
obj-y += pic.o setup.o time.o feature.o pci.o \
u32 gprs[NUM_GPRS];
u32 acrs[NUM_ACRS];
u32 orig_gpr2;
+ /* nb: there's a 4-byte hole here */
s390_fp_regs fp_regs;
/*
* These per registers are in here so that gdb can modify them
*/
tmp = (addr_t) task_pt_regs(child)->orig_gpr2;
+ } else if (addr < (addr_t) &dummy->regs.fp_regs) {
+ /*
+ * prevent reads of padding hole between
+ * orig_gpr2 and fp_regs on s390.
+ */
+ tmp = 0;
+
} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
/*
* floating point regs. are stored in the thread structure
*/
task_pt_regs(child)->orig_gpr2 = data;
+ } else if (addr < (addr_t) &dummy->regs.fp_regs) {
+ /*
+ * prevent writes of padding hole between
+ * orig_gpr2 and fp_regs on s390.
+ */
+ return 0;
+
} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
/*
* floating point regs. are stored in the thread structure
*/
tmp = *(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4);
+ } else if (addr < (addr_t) &dummy32->regs.fp_regs) {
+ /*
+ * prevent reads of padding hole between
+ * orig_gpr2 and fp_regs on s390.
+ */
+ tmp = 0;
+
} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
/*
* floating point regs. are stored in the thread structure
*/
*(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4) = tmp;
+ } else if (addr < (addr_t) &dummy32->regs.fp_regs) {
+ /*
+ * prevent writess of padding hole between
+ * orig_gpr2 and fp_regs on s390.
+ */
+ return 0;
+
} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
/*
* floating point regs. are stored in the thread structure
static void clock_comparator_interrupt(__u16 code)
{
+ if (S390_lowcore.clock_comparator == -1ULL)
+ set_clock_comparator(S390_lowcore.clock_comparator);
}
static void etr_timing_alert(struct etr_irq_parm *);
/*
- * arch/s390/lib/delay.c
* Precise Delay Loops for S390
*
- * S390 version
- * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- *
- * Derived from "arch/i386/lib/delay.c"
- * Copyright (C) 1993 Linus Torvalds
- * Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ * Copyright IBM Corp. 1999,2008
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ * Heiko Carstens <heiko.carstens@de.ibm.com>,
*/
#include <linux/sched.h>
asm volatile("0: brct %0,0b" : : "d" ((loops/2) + 1));
}
-/*
- * Waits for 'usecs' microseconds using the TOD clock comparator.
- */
-void __udelay(unsigned long usecs)
+static void __udelay_disabled(unsigned long usecs)
{
- u64 end, time, old_cc = 0;
- unsigned long flags, cr0, mask, dummy;
- int irq_context;
+ unsigned long mask, cr0, cr0_saved;
+ u64 clock_saved;
- irq_context = in_interrupt();
- if (!irq_context)
- local_bh_disable();
- local_irq_save(flags);
- if (raw_irqs_disabled_flags(flags)) {
- old_cc = local_tick_disable();
- S390_lowcore.clock_comparator = -1ULL;
- __ctl_store(cr0, 0, 0);
- dummy = (cr0 & 0xffff00e0) | 0x00000800;
- __ctl_load(dummy , 0, 0);
- mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
- } else
- mask = psw_kernel_bits | PSW_MASK_WAIT |
- PSW_MASK_EXT | PSW_MASK_IO;
+ clock_saved = local_tick_disable();
+ set_clock_comparator(get_clock() + ((u64) usecs << 12));
+ __ctl_store(cr0_saved, 0, 0);
+ cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
+ __ctl_load(cr0 , 0, 0);
+ mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
+ trace_hardirqs_on();
+ __load_psw_mask(mask);
+ local_irq_disable();
+ __ctl_load(cr0_saved, 0, 0);
+ local_tick_enable(clock_saved);
+ set_clock_comparator(S390_lowcore.clock_comparator);
+}
+static void __udelay_enabled(unsigned long usecs)
+{
+ unsigned long mask;
+ u64 end, time;
+
+ mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT | PSW_MASK_IO;
end = get_clock() + ((u64) usecs << 12);
do {
time = end < S390_lowcore.clock_comparator ?
__load_psw_mask(mask);
local_irq_disable();
} while (get_clock() < end);
+ set_clock_comparator(S390_lowcore.clock_comparator);
+}
- if (raw_irqs_disabled_flags(flags)) {
- __ctl_load(cr0, 0, 0);
- local_tick_enable(old_cc);
+/*
+ * Waits for 'usecs' microseconds using the TOD clock comparator.
+ */
+void __udelay(unsigned long usecs)
+{
+ unsigned long flags;
+
+ preempt_disable();
+ local_irq_save(flags);
+ if (in_irq()) {
+ __udelay_disabled(usecs);
+ goto out;
+ }
+ if (in_softirq()) {
+ if (raw_irqs_disabled_flags(flags))
+ __udelay_disabled(usecs);
+ else
+ __udelay_enabled(usecs);
+ goto out;
}
- if (!irq_context)
+ if (raw_irqs_disabled_flags(flags)) {
+ local_bh_disable();
+ __udelay_disabled(usecs);
_local_bh_enable();
- set_clock_comparator(S390_lowcore.clock_comparator);
+ goto out;
+ }
+ __udelay_enabled(usecs);
+out:
local_irq_restore(flags);
+ preempt_enable();
}
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:18:59 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 14:21:17 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
#
# File systems
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:44:41 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 14:18:17 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# CONFIG_USB is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
CONFIG_RTC_DRV_SH=y
# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
#
# File systems
extern long __put_user_asm_q(void *, long);
extern void __put_user_unknown(void);
+extern long __strnlen_user(const char *__s, long __n);
+
#endif /* __ASM_SH_UACCESS_64_H */
* arch/sh/kernel/cpu/sh5/entry.S
*
* Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2004 - 2007 Paul Mundt
+ * Copyright (C) 2004 - 2008 Paul Mundt
* Copyright (C) 2003, 2004 Richard Curnow
*
* This file is subject to the terms and conditions of the GNU General Public
blink tr0, ZERO
resume_kernel:
+ CLI()
+
pta restore_all, tr0
getcon KCR0, r6
andi r7, 0xf0, r7
bne r7, ZERO, tr0
- movi ((PREEMPT_ACTIVE >> 16) & 65535), r8
- shori (PREEMPT_ACTIVE & 65535), r8
- st.l r6, TI_PRE_COUNT, r8
-
- STI()
- movi schedule, r7
+ movi preempt_schedule_irq, r7
ori r7, 1, r7
ptabs r7, tr1
blink tr1, LINK
- st.l r6, TI_PRE_COUNT, ZERO
- CLI()
-
pta need_resched, tr1
blink tr1, ZERO
#endif
bra resume_userspace
nop
ENTRY(resume_kernel)
+ cli
mov.l @(TI_PRE_COUNT,r8), r0 ! current_thread_info->preempt_count
tst r0, r0
bf noresched
and #0xf0, r0 ! interrupts off (exception path)?
cmp/eq #0xf0, r0
bt noresched
-
- mov.l 1f, r0
- mov.l r0, @(TI_PRE_COUNT,r8)
-
-#ifdef CONFIG_TRACE_IRQFLAGS
mov.l 3f, r0
- jsr @r0
- nop
-#endif
- sti
- mov.l 2f, r0
- jsr @r0
- nop
- mov #0, r0
- mov.l r0, @(TI_PRE_COUNT,r8)
- cli
-#ifdef CONFIG_TRACE_IRQFLAGS
- mov.l 4f, r0
- jsr @r0
+ jsr @r0 ! call preempt_schedule_irq
nop
-#endif
-
bra need_resched
nop
.align 2
1: .long PREEMPT_ACTIVE
2: .long schedule
-#ifdef CONFIG_TRACE_IRQFLAGS
-3: .long trace_hardirqs_on
-4: .long trace_hardirqs_off
-#endif
+3: .long preempt_schedule_irq
#endif
ENTRY(resume_userspace)
/* now call it */
rnk = (relocate_new_kernel_t) reboot_code_buffer;
- (*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg);
+ (*rnk)(page_list, reboot_code_buffer, P2SEGADDR(image->start), vbr_reg);
}
void arch_crash_save_vmcoreinfo(void)
void user_disable_single_step(struct task_struct *child)
{
+ struct pt_regs *regs = child->thread.uregs;
+
regs->sr &= ~SR_SSTEP;
}
(unsigned long)(free_mem >> 20));
crashk_res.start = crash_base;
crashk_res.end = crash_base + crash_size - 1;
+ insert_resource(&iomem_resource, &crashk_res);
}
}
#else
request_resource(res, &data_resource);
request_resource(res, &bss_resource);
-#ifdef CONFIG_KEXEC
- if (crashk_res.start != crashk_res.end)
- request_resource(res, &crashk_res);
-#endif
-
add_active_range(nid, start_pfn, end_pfn);
}
version = call >> 16; /* hack for backward compatibility */
call &= 0xffff;
- if (call <= SEMCTL)
+ if (call <= SEMTIMEDOP)
switch (call) {
case SEMOP:
return sys_semtimedop(first,
}
__setup("memchunk.", memchunk_setup);
-static void memchunk_cmdline_override(char *name, unsigned long *sizep)
+static void __init memchunk_cmdline_override(char *name, unsigned long *sizep)
{
char *p = boot_command_line;
int k = strlen(name);
}
}
-int platform_resource_setup_memory(struct platform_device *pdev,
- char *name, unsigned long memsize)
+int __init platform_resource_setup_memory(struct platform_device *pdev,
+ char *name, unsigned long memsize)
{
struct resource *r;
dma_addr_t dma_handle;
void smp_bogo(struct seq_file *);
void smp_info(struct seq_file *);
-BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, cpumask_t, unsigned long, unsigned long, unsigned long, unsigned long)
BTFIXUPDEF_CALL(int, __hard_smp_processor_id, void)
BTFIXUPDEF_BLACKBOX(hard_smp_processor_id)
BTFIXUPDEF_BLACKBOX(load_current)
-#define smp_cross_call(func,arg1,arg2,arg3,arg4,arg5) BTFIXUP_CALL(smp_cross_call)(func,arg1,arg2,arg3,arg4,arg5)
+#define smp_cross_call(func,mask,arg1,arg2,arg3,arg4) BTFIXUP_CALL(smp_cross_call)(func,mask,arg1,arg2,arg3,arg4)
-static inline void xc0(smpfunc_t func) { smp_cross_call(func, 0, 0, 0, 0, 0); }
+static inline void xc0(smpfunc_t func) { smp_cross_call(func, cpu_online_map, 0, 0, 0, 0); }
static inline void xc1(smpfunc_t func, unsigned long arg1)
-{ smp_cross_call(func, arg1, 0, 0, 0, 0); }
+{ smp_cross_call(func, cpu_online_map, arg1, 0, 0, 0); }
static inline void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2)
-{ smp_cross_call(func, arg1, arg2, 0, 0, 0); }
+{ smp_cross_call(func, cpu_online_map, arg1, arg2, 0, 0); }
static inline void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2,
unsigned long arg3)
-{ smp_cross_call(func, arg1, arg2, arg3, 0, 0); }
+{ smp_cross_call(func, cpu_online_map, arg1, arg2, arg3, 0); }
static inline void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2,
unsigned long arg3, unsigned long arg4)
-{ smp_cross_call(func, arg1, arg2, arg3, arg4, 0); }
-static inline void xc5(smpfunc_t func, unsigned long arg1, unsigned long arg2,
- unsigned long arg3, unsigned long arg4, unsigned long arg5)
-{ smp_cross_call(func, arg1, arg2, arg3, arg4, arg5); }
+{ smp_cross_call(func, cpu_online_map, arg1, arg2, arg3, arg4); }
static inline int smp_call_function(void (*func)(void *info), void *info, int wait)
{
return 0;
}
+static inline int smp_call_function_single(int cpuid, void (*func) (void *info),
+ void *info, int wait)
+{
+ smp_cross_call((smpfunc_t)func, cpumask_of_cpu(cpuid),
+ (unsigned long) info, 0, 0, 0);
+ return 0;
+}
+
static inline int cpu_logical_map(int cpu)
{
return cpu;
int *addrc, int *sizec);
int (*map)(u32 *addr, const u32 *range,
int na, int ns, int pna);
- unsigned int (*get_flags)(const u32 *addr);
+ unsigned long (*get_flags)(const u32 *addr, unsigned long);
};
/*
return 0;
}
-static unsigned int of_bus_default_get_flags(const u32 *addr)
+static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags)
{
+ if (flags)
+ return flags;
return IORESOURCE_MEM;
}
return 0;
}
-static unsigned int of_bus_pci_get_flags(const u32 *addr)
+static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags)
{
- unsigned int flags = 0;
u32 w = addr[0];
+ /* For PCI, we override whatever child busses may have used. */
+ flags = 0;
switch((w >> 24) & 0x03) {
case 0x01:
flags |= IORESOURCE_IO;
+ break;
+
case 0x02: /* 32 bits */
case 0x03: /* 64 bits */
flags |= IORESOURCE_MEM;
+ break;
}
if (w & 0x40000000)
flags |= IORESOURCE_PREFETCH;
return of_bus_default_map(addr, range, na, ns, pna);
}
-static unsigned int of_bus_sbus_get_flags(const u32 *addr)
+static unsigned long of_bus_sbus_get_flags(const u32 *addr, unsigned long flags)
{
return IORESOURCE_MEM;
}
int pna, pns;
size = of_read_addr(reg + na, ns);
- flags = bus->get_flags(reg);
memcpy(addr, reg, na * 4);
+ flags = bus->get_flags(reg, 0);
+
/* If the immediate parent has no ranges property to apply,
* just use a 1<->1 mapping.
*/
dna, dns, pna))
break;
+ flags = pbus->get_flags(addr, flags);
+
dna = pna;
dns = pns;
dbus = pbus;
*/
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
- .n = 38 * sizeof(u32),
+ .n = 38,
.size = sizeof(u32), .align = sizeof(u32),
.get = genregs32_get, .set = genregs32_set
},
*/
[REGSET_FP] = {
.core_note_type = NT_PRFPREG,
- .n = 99 * sizeof(u32),
+ .n = 99,
.size = sizeof(u32), .align = sizeof(u32),
.get = fpregs32_get, .set = fpregs32_set
},
static DEFINE_SPINLOCK(cross_call_lock);
/* Cross calls must be serialized, at least currently. */
-void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
- unsigned long arg3, unsigned long arg4, unsigned long arg5)
+static void smp4d_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1,
+ unsigned long arg2, unsigned long arg3,
+ unsigned long arg4)
{
if(smp_processors_ready) {
register int high = smp_highest_cpu;
register unsigned long a2 asm("i2") = arg2;
register unsigned long a3 asm("i3") = arg3;
register unsigned long a4 asm("i4") = arg4;
- register unsigned long a5 asm("i5") = arg5;
+ register unsigned long a5 asm("i5") = 0;
__asm__ __volatile__(
"std %0, [%6]\n\t"
/* Init receive/complete mapping, plus fire the IPI's off. */
{
- cpumask_t mask;
register int i;
- mask = cpumask_of_cpu(hard_smp4d_processor_id());
- cpus_andnot(mask, cpu_online_map, mask);
+ cpu_clear(smp_processor_id(), mask);
+ cpus_and(mask, cpu_online_map, mask);
for(i = 0; i <= high; i++) {
if (cpu_isset(i, mask)) {
ccall_info.processors_in[i] = 0;
i = 0;
do {
+ if (!cpu_isset(i, mask))
+ continue;
while(!ccall_info.processors_in[i])
barrier();
} while(++i <= high);
i = 0;
do {
+ if (!cpu_isset(i, mask))
+ continue;
while(!ccall_info.processors_out[i])
barrier();
} while(++i <= high);
static DEFINE_SPINLOCK(cross_call_lock);
/* Cross calls must be serialized, at least currently. */
-static void smp4m_cross_call(smpfunc_t func, unsigned long arg1,
+static void smp4m_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1,
unsigned long arg2, unsigned long arg3,
- unsigned long arg4, unsigned long arg5)
+ unsigned long arg4)
{
register int ncpus = SUN4M_NCPUS;
unsigned long flags;
ccall_info.arg2 = arg2;
ccall_info.arg3 = arg3;
ccall_info.arg4 = arg4;
- ccall_info.arg5 = arg5;
+ ccall_info.arg5 = 0;
/* Init receive/complete mapping, plus fire the IPI's off. */
{
- cpumask_t mask = cpu_online_map;
register int i;
cpu_clear(smp_processor_id(), mask);
+ cpus_and(mask, cpu_online_map, mask);
for(i = 0; i < ncpus; i++) {
if (cpu_isset(i, mask)) {
ccall_info.processors_in[i] = 0;
i = 0;
do {
+ if (!cpu_isset(i, mask))
+ continue;
while(!ccall_info.processors_in[i])
barrier();
} while(++i < ncpus);
i = 0;
do {
+ if (!cpu_isset(i, mask))
+ continue;
while(!ccall_info.processors_out[i])
barrier();
} while(++i < ncpus);
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/linkage.h>
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/kernel_stat.h>
}
spin_unlock_irqrestore(&irq_desc[irq].lock, flags);
}
+
+ tick_ops->disable_irq();
}
#endif
: "g1", "g2");
}
-void init_irqwork_curcpu(void)
+void notrace init_irqwork_curcpu(void)
{
int cpu = hard_smp_processor_id();
}
}
-void __cpuinit sun4v_register_mondo_queues(int this_cpu)
+void __cpuinit notrace sun4v_register_mondo_queues(int this_cpu)
{
struct trap_per_cpu *tb = &trap_block[this_cpu];
int *addrc, int *sizec);
int (*map)(u32 *addr, const u32 *range,
int na, int ns, int pna);
- unsigned int (*get_flags)(const u32 *addr);
+ unsigned long (*get_flags)(const u32 *addr, unsigned long);
};
/*
return 0;
}
-static unsigned int of_bus_default_get_flags(const u32 *addr)
+static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags)
{
+ if (flags)
+ return flags;
return IORESOURCE_MEM;
}
static int of_bus_pci_match(struct device_node *np)
{
- if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) {
+ if (!strcmp(np->name, "pci")) {
const char *model = of_get_property(np, "model", NULL);
if (model && !strcmp(model, "SUNW,simba"))
/* Treat PCI busses lacking ranges property just like
* simba.
*/
- if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) {
+ if (!strcmp(np->name, "pci")) {
if (!of_find_property(np, "ranges", NULL))
return 1;
}
return 0;
}
-static unsigned int of_bus_pci_get_flags(const u32 *addr)
+static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags)
{
- unsigned int flags = 0;
u32 w = addr[0];
+ /* For PCI, we override whatever child busses may have used. */
+ flags = 0;
switch((w >> 24) & 0x03) {
case 0x01:
flags |= IORESOURCE_IO;
+ break;
+
case 0x02: /* 32 bits */
case 0x03: /* 64 bits */
flags |= IORESOURCE_MEM;
+ break;
}
if (w & 0x40000000)
flags |= IORESOURCE_PREFETCH;
* it lacks a ranges property, and this will include
* cases like Simba.
*/
- if (!strcmp(pp->type, "pci") || !strcmp(pp->type, "pciex"))
+ if (!strcmp(pp->name, "pci"))
return 0;
return 1;
int pna, pns;
size = of_read_addr(reg + na, ns);
- flags = bus->get_flags(reg);
-
memcpy(addr, reg, na * 4);
+ flags = bus->get_flags(addr, 0);
+
if (use_1to1_mapping(pp)) {
result = of_read_addr(addr, na);
goto build_res;
dna, dns, pna))
break;
+ flags = pbus->get_flags(addr, flags);
+
dna = pna;
dns = pns;
dbus = pbus;
break;
}
} else {
- if (!strcmp(pp->type, "pci") ||
- !strcmp(pp->type, "pciex")) {
+ if (!strcmp(pp->name, "pci")) {
unsigned int this_orig_irq = irq;
irq = pci_irq_swizzle(dp, pp, irq);
dev->current_state = 4; /* unknown power state */
dev->error_state = pci_channel_io_normal;
- if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
+ if (!strcmp(node->name, "pci")) {
/* a PCI-PCI bridge */
dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
dev->rom_base_reg = PCI_ROM_ADDRESS1;
{
unsigned long csr_reg, csr, csr_error_bits;
irqreturn_t ret = IRQ_NONE;
- u16 stat;
+ u16 stat, *addr;
if (is_pbm_a) {
csr_reg = pbm->controller_regs + PSYCHO_PCIA_CTRL;
printk("%s: PCI SERR signal asserted.\n", pbm->name);
ret = IRQ_HANDLED;
}
- pci_read_config_word(pbm->pci_bus->self, PCI_STATUS, &stat);
+ addr = psycho_pci_config_mkaddr(pbm, pbm->pci_first_busno,
+ 0, PCI_STATUS);
+ pci_config_read16(addr, &stat);
if (stat & (PCI_STATUS_PARITY |
PCI_STATUS_SIG_TARGET_ABORT |
PCI_STATUS_REC_TARGET_ABORT |
PCI_STATUS_SIG_SYSTEM_ERROR)) {
printk("%s: PCI bus error, PCI_STATUS[%04x]\n",
pbm->name, stat);
- pci_write_config_word(pbm->pci_bus->self, PCI_STATUS, 0xffff);
+ pci_config_write16(addr, 0xffff);
ret = IRQ_HANDLED;
}
return ret;
* the second will just error out since we do not pass in
* IRQF_SHARED.
*/
- err = request_irq(op->irqs[1], psycho_ue_intr, 0,
+ err = request_irq(op->irqs[1], psycho_ue_intr, IRQF_SHARED,
"PSYCHO_UE", pbm);
- err = request_irq(op->irqs[2], psycho_ce_intr, 0,
+ err = request_irq(op->irqs[2], psycho_ce_intr, IRQF_SHARED,
"PSYCHO_CE", pbm);
/* This one, however, ought not to fail. We can just warn
* about it since the system can still operate properly even
* if this fails.
*/
- err = request_irq(op->irqs[0], psycho_pcierr_intr, 0,
+ err = request_irq(op->irqs[0], psycho_pcierr_intr, IRQF_SHARED,
"PSYCHO_PCIERR", pbm);
if (err)
printk(KERN_WARNING "%s: Could not register PCIERR, "
return PSYCHO_IMAP_B_SLOT0 + (slot * 8);
}
-#define PSYCHO_IMAP_SCSI 0x1000UL
-#define PSYCHO_IMAP_ETH 0x1008UL
-#define PSYCHO_IMAP_BPP 0x1010UL
-#define PSYCHO_IMAP_AU_REC 0x1018UL
-#define PSYCHO_IMAP_AU_PLAY 0x1020UL
-#define PSYCHO_IMAP_PFAIL 0x1028UL
-#define PSYCHO_IMAP_KMS 0x1030UL
-#define PSYCHO_IMAP_FLPY 0x1038UL
-#define PSYCHO_IMAP_SHW 0x1040UL
-#define PSYCHO_IMAP_KBD 0x1048UL
-#define PSYCHO_IMAP_MS 0x1050UL
-#define PSYCHO_IMAP_SER 0x1058UL
-#define PSYCHO_IMAP_TIM0 0x1060UL
-#define PSYCHO_IMAP_TIM1 0x1068UL
-#define PSYCHO_IMAP_UE 0x1070UL
-#define PSYCHO_IMAP_CE 0x1078UL
-#define PSYCHO_IMAP_A_ERR 0x1080UL
-#define PSYCHO_IMAP_B_ERR 0x1088UL
-#define PSYCHO_IMAP_PMGMT 0x1090UL
-#define PSYCHO_IMAP_GFX 0x1098UL
-#define PSYCHO_IMAP_EUPA 0x10a0UL
-
-static unsigned long __psycho_onboard_imap_off[] = {
-/*0x20*/ PSYCHO_IMAP_SCSI,
-/*0x21*/ PSYCHO_IMAP_ETH,
-/*0x22*/ PSYCHO_IMAP_BPP,
-/*0x23*/ PSYCHO_IMAP_AU_REC,
-/*0x24*/ PSYCHO_IMAP_AU_PLAY,
-/*0x25*/ PSYCHO_IMAP_PFAIL,
-/*0x26*/ PSYCHO_IMAP_KMS,
-/*0x27*/ PSYCHO_IMAP_FLPY,
-/*0x28*/ PSYCHO_IMAP_SHW,
-/*0x29*/ PSYCHO_IMAP_KBD,
-/*0x2a*/ PSYCHO_IMAP_MS,
-/*0x2b*/ PSYCHO_IMAP_SER,
-/*0x2c*/ PSYCHO_IMAP_TIM0,
-/*0x2d*/ PSYCHO_IMAP_TIM1,
-/*0x2e*/ PSYCHO_IMAP_UE,
-/*0x2f*/ PSYCHO_IMAP_CE,
-/*0x30*/ PSYCHO_IMAP_A_ERR,
-/*0x31*/ PSYCHO_IMAP_B_ERR,
-/*0x32*/ PSYCHO_IMAP_PMGMT,
-/*0x33*/ PSYCHO_IMAP_GFX,
-/*0x34*/ PSYCHO_IMAP_EUPA,
-};
+#define PSYCHO_OBIO_IMAP_BASE 0x1000UL
+
#define PSYCHO_ONBOARD_IRQ_BASE 0x20
-#define PSYCHO_ONBOARD_IRQ_LAST 0x34
#define psycho_onboard_imap_offset(__ino) \
- __psycho_onboard_imap_off[(__ino) - PSYCHO_ONBOARD_IRQ_BASE]
+ (PSYCHO_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
#define PSYCHO_ICLR_A_SLOT0 0x1400UL
#define PSYCHO_ICLR_SCSI 0x1800UL
imap_off = psycho_pcislot_imap_offset(ino);
} else {
/* Onboard device */
- if (ino > PSYCHO_ONBOARD_IRQ_LAST) {
- prom_printf("psycho_irq_build: Wacky INO [%x]\n", ino);
- prom_halt();
- }
imap_off = psycho_onboard_imap_offset(ino);
}
#define SABRE_IMAP_A_SLOT0 0x0c00UL
#define SABRE_IMAP_B_SLOT0 0x0c20UL
-#define SABRE_IMAP_SCSI 0x1000UL
-#define SABRE_IMAP_ETH 0x1008UL
-#define SABRE_IMAP_BPP 0x1010UL
-#define SABRE_IMAP_AU_REC 0x1018UL
-#define SABRE_IMAP_AU_PLAY 0x1020UL
-#define SABRE_IMAP_PFAIL 0x1028UL
-#define SABRE_IMAP_KMS 0x1030UL
-#define SABRE_IMAP_FLPY 0x1038UL
-#define SABRE_IMAP_SHW 0x1040UL
-#define SABRE_IMAP_KBD 0x1048UL
-#define SABRE_IMAP_MS 0x1050UL
-#define SABRE_IMAP_SER 0x1058UL
-#define SABRE_IMAP_UE 0x1070UL
-#define SABRE_IMAP_CE 0x1078UL
-#define SABRE_IMAP_PCIERR 0x1080UL
-#define SABRE_IMAP_GFX 0x1098UL
-#define SABRE_IMAP_EUPA 0x10a0UL
#define SABRE_ICLR_A_SLOT0 0x1400UL
#define SABRE_ICLR_B_SLOT0 0x1480UL
#define SABRE_ICLR_SCSI 0x1800UL
return SABRE_IMAP_B_SLOT0 + (slot * 8);
}
-static unsigned long __sabre_onboard_imap_off[] = {
-/*0x20*/ SABRE_IMAP_SCSI,
-/*0x21*/ SABRE_IMAP_ETH,
-/*0x22*/ SABRE_IMAP_BPP,
-/*0x23*/ SABRE_IMAP_AU_REC,
-/*0x24*/ SABRE_IMAP_AU_PLAY,
-/*0x25*/ SABRE_IMAP_PFAIL,
-/*0x26*/ SABRE_IMAP_KMS,
-/*0x27*/ SABRE_IMAP_FLPY,
-/*0x28*/ SABRE_IMAP_SHW,
-/*0x29*/ SABRE_IMAP_KBD,
-/*0x2a*/ SABRE_IMAP_MS,
-/*0x2b*/ SABRE_IMAP_SER,
-/*0x2c*/ 0 /* reserved */,
-/*0x2d*/ 0 /* reserved */,
-/*0x2e*/ SABRE_IMAP_UE,
-/*0x2f*/ SABRE_IMAP_CE,
-/*0x30*/ SABRE_IMAP_PCIERR,
-/*0x31*/ 0 /* reserved */,
-/*0x32*/ 0 /* reserved */,
-/*0x33*/ SABRE_IMAP_GFX,
-/*0x34*/ SABRE_IMAP_EUPA,
-};
-#define SABRE_ONBOARD_IRQ_BASE 0x20
-#define SABRE_ONBOARD_IRQ_LAST 0x30
+#define SABRE_OBIO_IMAP_BASE 0x1000UL
+#define SABRE_ONBOARD_IRQ_BASE 0x20
#define sabre_onboard_imap_offset(__ino) \
- __sabre_onboard_imap_off[(__ino) - SABRE_ONBOARD_IRQ_BASE]
+ (SABRE_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
#define sabre_iclr_offset(ino) \
((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \
imap_off = sabre_pcislot_imap_offset(ino);
} else {
/* onboard device */
- if (ino > SABRE_ONBOARD_IRQ_LAST) {
- prom_printf("sabre_irq_build: Wacky INO [%x]\n", ino);
- prom_halt();
- }
imap_off = sabre_onboard_imap_offset(ino);
}
*/
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
- .n = 36 * sizeof(u64),
+ .n = 36,
.size = sizeof(u64), .align = sizeof(u64),
.get = genregs64_get, .set = genregs64_set
},
*/
[REGSET_FP] = {
.core_note_type = NT_PRFPREG,
- .n = 35 * sizeof(u64),
+ .n = 35,
.size = sizeof(u64), .align = sizeof(u64),
.get = fpregs64_get, .set = fpregs64_set
},
*/
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
- .n = 38 * sizeof(u32),
+ .n = 38,
.size = sizeof(u32), .align = sizeof(u32),
.get = genregs32_get, .set = genregs32_set
},
*/
[REGSET_FP] = {
.core_note_type = NT_PRFPREG,
- .n = 99 * sizeof(u32),
+ .n = 99,
.size = sizeof(u32), .align = sizeof(u32),
.get = fpregs32_get, .set = fpregs32_set
},
i, cpu_data(i).clock_tick);
}
-static __cacheline_aligned_in_smp DEFINE_SPINLOCK(call_lock);
-
extern void setup_sparc64_timer(void);
static volatile unsigned long callin_flag = 0;
while (!cpu_isset(cpuid, smp_commenced_mask))
rmb();
- spin_lock(&call_lock);
+ ipi_call_lock();
cpu_set(cpuid, cpu_online_map);
- spin_unlock(&call_lock);
+ ipi_call_unlock();
/* idle thread is expected to have preempt disabled */
preempt_disable();
c->core_id = 0;
c->proc_id = -1;
- spin_lock(&call_lock);
- cpu_clear(cpu, cpu_online_map);
- spin_unlock(&call_lock);
-
smp_wmb();
/* Make sure no interrupts point to this cpu. */
mdelay(1);
local_irq_disable();
+ ipi_call_lock();
+ cpu_clear(cpu, cpu_online_map);
+ ipi_call_unlock();
+
return 0;
}
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/linkage.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/smp.h>
/* This can get invoked before sched_init() so play it super safe
* and use hard_smp_processor_id().
*/
-void init_cur_cpu_trap(struct thread_info *t)
+void notrace init_cur_cpu_trap(struct thread_info *t)
{
int cpu = hard_smp_processor_id();
struct trap_per_cpu *p = &trap_block[cpu];
* memory list again, and make sure it provides at least as much
* memory as 'pavail' does.
*/
-static void setup_valid_addr_bitmap_from_pavail(void)
+static void __init setup_valid_addr_bitmap_from_pavail(void)
{
int i;
select HAVE_FTRACE
select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
select HAVE_ARCH_KGDB if !X86_VOYAGER
+ select HAVE_ARCH_TRACEHOOK
select HAVE_GENERIC_DMA_COHERENT if X86_32
select HAVE_EFFICIENT_UNALIGNED_ACCESS
config ARCH_FLATMEM_ENABLE
def_bool y
- depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && X86_PC && !NUMA
+ depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && !NUMA
config ARCH_DISCONTIGMEM_ENABLE
def_bool y
config ARCH_SPARSEMEM_ENABLE
def_bool y
- depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC)
+ depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC) || X86_GENERICARCH
select SPARSEMEM_STATIC if X86_32
select SPARSEMEM_VMEMMAP_ENABLE if X86_64
You can safely say Y even if your machine doesn't have MTRRs, you'll
just add about 9 KB to your kernel.
- See <file:Documentation/mtrr.txt> for more information.
+ See <file:Documentation/x86/mtrr.txt> for more information.
config MTRR_SANITIZER
- bool
+ def_bool y
prompt "MTRR cleanup support"
depends on MTRR
help
The largest mtrr entry size for a continous block can be set with
mtrr_chunk_size.
- If unsure, say N.
+ If unsure, say Y.
config MTRR_SANITIZER_ENABLE_DEFAULT
int "MTRR cleanup enable value (0-1)"
config SECCOMP
def_bool y
prompt "Enable seccomp to safely compute untrusted bytecode"
- depends on PROC_FS
help
This kernel feature is useful for number crunching applications
that may need to compute untrusted bytecode during their
the process as file descriptors supporting the read/write
syscalls, it's possible to isolate those applications in
their own address space using seccomp. Once seccomp is
- enabled via /proc/<pid>/seccomp, it cannot be disabled
+ enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
and the task is only allowed to execute a few safe syscalls
defined by each seccomp mode.
Don't change this unless you know what you are doing.
config HOTPLUG_CPU
- bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)"
- depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
+ bool "Support for hot-pluggable CPUs"
+ depends on SMP && HOTPLUG && !X86_VOYAGER
---help---
- Say Y here to experiment with turning CPUs off and on, and to
- enable suspend on SMP systems. CPUs can be controlled through
- /sys/devices/system/cpu.
- Say N if you want to disable CPU hotplug and don't need to
- suspend.
+ Say Y here to allow turning CPUs off and on. CPUs can be
+ controlled through /sys/devices/system/cpu.
+ ( Note: power management support will enable this option
+ automatically on SMP systems. )
+ Say N if you want to disable CPU hotplug.
config COMPAT_VDSO
def_bool y
If unsure, say Y.
+config CMDLINE_BOOL
+ bool "Built-in kernel command line"
+ default n
+ help
+ Allow for specifying boot arguments to the kernel at
+ build time. On some systems (e.g. embedded ones), it is
+ necessary or convenient to provide some or all of the
+ kernel boot arguments with the kernel itself (that is,
+ to not rely on the boot loader to provide them.)
+
+ To compile command line arguments into the kernel,
+ set this option to 'Y', then fill in the
+ the boot arguments in CONFIG_CMDLINE.
+
+ Systems with fully functional boot loaders (i.e. non-embedded)
+ should leave this option set to 'N'.
+
+config CMDLINE
+ string "Built-in kernel command string"
+ depends on CMDLINE_BOOL
+ default ""
+ help
+ Enter arguments here that should be compiled into the kernel
+ image and used at boot time. If the boot loader provides a
+ command line at boot time, it is appended to this string to
+ form the full kernel command line, when the system boots.
+
+ However, you can use the CONFIG_CMDLINE_OVERRIDE option to
+ change this behavior.
+
+ In most cases, the command line (whether built-in or provided
+ by the boot loader) should specify the device for the root
+ file system.
+
+config CMDLINE_OVERRIDE
+ bool "Built-in command line overrides boot loader arguments"
+ default n
+ depends on CMDLINE_BOOL
+ help
+ Set this option to 'Y' to have the kernel ignore the boot loader
+ command line, and use ONLY the built-in command line.
+
+ This is used to work around broken boot loaders. This should
+ be set to 'N' under normal conditions.
+
endmenu
config ARCH_ENABLE_MEMORY_HOTPLUG
config SYSVIPC_COMPAT
def_bool y
- depends on X86_64 && COMPAT && SYSVIPC
+ depends on COMPAT && SYSVIPC
endmenu
# P6_NOPs are a relatively minor optimization that require a family >=
# 6 processor, except that it is broken on certain VIA chips.
# Furthermore, AMD chips prefer a totally different sequence of NOPs
-# (which work on all CPUs). As a result, disallow these if we're
-# compiling X86_GENERIC but not X86_64 (these NOPs do work on all
-# x86-64 capable chips); the list of processors in the right-hand clause
-# are the cores that benefit from this optimization.
+# (which work on all CPUs). In addition, it looks like Virtual PC
+# does not understand them.
+#
+# As a result, disallow these if we're not compiling for X86_64 (these
+# NOPs do work on all x86-64 capable chips); the list of processors in
+# the right-hand clause are the cores that benefit from this optimization.
#
config X86_P6_NOP
def_bool y
- depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || MPENTIUM4 || MPSC)
+ depends on X86_64
+ depends on (MCORE2 || MPENTIUM4 || MPSC)
config X86_TSC
def_bool y
config X86_DEBUGCTLMSR
def_bool y
depends on !(MK6 || MWINCHIPC6 || MWINCHIP2 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386)
+
+config X86_DS
+ bool "Debug Store support"
+ default y
+ help
+ Add support for Debug Store.
+ This allows the kernel to provide a memory buffer to the hardware
+ to store various profiling and tracing events.
+
+config X86_PTRACE_BTS
+ bool "ptrace interface to Branch Trace Store"
+ default y
+ depends on (X86_DS && X86_DEBUGCTLMSR)
+ help
+ Add a ptrace interface to allow collecting an execution trace
+ of the traced task.
+ This collects control flow changes in a (cyclic) buffer and allows
+ debuggers to fill in the gaps and show an execution trace of the debuggee.
*/
movl output_len(%ebx), %eax
pushl %eax
+ # push arguments for decompress_kernel:
pushl %ebp # output address
movl input_len(%ebx), %eax
pushl %eax # input_len
leal input_data(%ebx), %eax
pushl %eax # input_data
leal boot_heap(%ebx), %eax
- pushl %eax # heap area as third argument
- pushl %esi # real mode pointer as second arg
+ pushl %eax # heap area
+ pushl %esi # real mode pointer
call decompress_kernel
addl $20, %esp
popl %ecx
*/
#undef CONFIG_PARAVIRT
#ifdef CONFIG_X86_32
-#define _ASM_DESC_H_ 1
+#define ASM_X86__DESC_H 1
#endif
#ifdef CONFIG_X86_64
#include <linux/linkage.h>
#include <linux/screen_info.h>
#include <linux/elf.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/page.h>
#include <asm/boot.h>
#include <asm/bootparam.h>
y--;
}
} else {
- vidmem [(x + cols * y) * 2] = c;
+ vidmem[(x + cols * y) * 2] = c;
if (++x >= cols) {
x = 0;
if (++y >= lines) {
int i;
char *ss = s;
- for (i = 0; i < n; i++) ss[i] = c;
+ for (i = 0; i < n; i++)
+ ss[i] = c;
return s;
}
const char *s = src;
char *d = dest;
- for (i = 0; i < n; i++) d[i] = s[i];
+ for (i = 0; i < n; i++)
+ d[i] = s[i];
return dest;
}
continue;
}
sh_symtab = sec_symtab->symtab;
- sym_strtab = sec->link->strtab;
+ sym_strtab = sec_symtab->link->strtab;
for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) {
Elf32_Rel *rel;
Elf32_Sym *sym;
{
REQUIRED_MASK0,
REQUIRED_MASK1,
- REQUIRED_MASK2,
- REQUIRED_MASK3,
+ 0, /* REQUIRED_MASK2 not implemented in this file */
+ 0, /* REQUIRED_MASK3 not implemented in this file */
REQUIRED_MASK4,
- REQUIRED_MASK5,
+ 0, /* REQUIRED_MASK5 not implemented in this file */
REQUIRED_MASK6,
- REQUIRED_MASK7,
+ 0, /* REQUIRED_MASK7 not implemented in this file */
};
#define A32(a, b, c, d) (((d) << 24)+((c) << 16)+((b) << 8)+(a))
SYSSIZE = DEF_SYSSIZE /* system size: # of 16-byte clicks */
/* to be loaded */
ROOT_DEV = 0 /* ROOT_DEV is now written by "build" */
-SWAP_DEV = 0 /* SWAP_DEV is now written by "build" */
#ifndef SVGA_MODE
#define SVGA_MODE ASK_VGA
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Sun May 4 19:59:02 2008
+# Linux kernel version: 2.6.27-rc5
+# Wed Sep 3 17:23:09 2008
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
-CONFIG_DEFCONFIG_LIST="arch/x86/configs/i386_defconfig"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
+# CONFIG_X86_RDC321X is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
+# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
-# CONFIG_M686 is not set
+CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
-CONFIG_MCORE2=y
+# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
-# CONFIG_X86_GENERIC is not set
+CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
+# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
-CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=6
+CONFIG_X86_CMOV=y
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
-CONFIG_NR_CPUS=4
-# CONFIG_SCHED_SMT is not set
+CONFIG_NR_CPUS=64
+CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
-# CONFIG_X86_REBOOTFIXUPS is not set
-# CONFIG_MICROCODE is not set
+CONFIG_X86_REBOOTFIXUPS=y
+CONFIG_MICROCODE=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
-CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-
-#
-# Memory hotplug is currently incompatible with Software Suspend
-#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-# CONFIG_HIGHPTE is not set
+CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
-# CONFIG_X86_PAT is not set
+# CONFIG_MTRR_SANITIZER is not set
+CONFIG_X86_PAT=y
CONFIG_EFI=y
# CONFIG_IRQBALANCE is not set
CONFIG_SECCOMP=y
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
+# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
+# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
-CONFIG_PCI_GOANY=y
# CONFIG_PCI_GOOLPC is not set
+CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
CONFIG_CFG80211=y
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_MAC80211=y
#
# Rate control algorithm selection
#
+CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_MSI_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=y
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
+CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
+CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
+CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
+CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
+CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
+CONFIG_BNX2=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
-# CONFIG_IWLWIFI is not set
+# CONFIG_ATH9K is not set
# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWL4965 is not set
+# CONFIG_IWLAGN is not set
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_INTEL is not set
-# CONFIG_HW_RANDOM_AMD is not set
+CONFIG_HW_RANDOM_INTEL=y
+CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_SCx200_ACB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
+# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
#
# Display device support
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# LED drivers
#
+# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
+# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
# Firmware Drivers
#
# CONFIG_EDD is not set
+CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
-# CONFIG_ISCSI_IBFT_FIND is not set
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=y
#
# File systems
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SYSPROF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not set
-# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
+CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_4KSTACKS is not set
-CONFIG_X86_FIND_SMP_CONFIG=y
-CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
+# CONFIG_MMIOTRACE is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
#
# Security options
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# Ciphers
#
CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_AES_586 is not set
+CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Sun May 4 19:59:57 2008
+# Linux kernel version: 2.6.27-rc5
+# Wed Sep 3 17:13:39 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
-CONFIG_DEFCONFIG_LIST="arch/x86/configs/x86_64_defconfig"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
# CONFIG_PARAVIRT_GUEST is not set
-CONFIG_MEMTEST_BOOTPARAM=y
-CONFIG_MEMTEST_BOOTPARAM_VALUE=0
+# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
-CONFIG_MCORE2=y
-# CONFIG_GENERIC_CPU is not set
+# CONFIG_MCORE2 is not set
+CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
-CONFIG_X86_L1_CACHE_BYTES=64
-CONFIG_X86_INTERNODE_CACHE_BYTES=64
+CONFIG_X86_L1_CACHE_BYTES=128
+CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_GOOD_APIC=y
-CONFIG_X86_INTEL_USERCOPY=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_X86_P6_NOP=y
+CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
+CONFIG_AMD_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
-CONFIG_NR_CPUS=4
-# CONFIG_SCHED_SMT is not set
+CONFIG_NR_CPUS=64
+CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
# CONFIG_I8K is not set
-# CONFIG_MICROCODE is not set
+CONFIG_MICROCODE=y
+CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_NUMA=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
-# CONFIG_X86_PAT is not set
+# CONFIG_MTRR_SANITIZER is not set
+CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
+# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
CONFIG_CFG80211=y
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_MAC80211=y
#
# Rate control algorithm selection
#
+CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_SGI_XP is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_SGI_GRU is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=y
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
-# CONFIG_IWLWIFI is not set
+# CONFIG_ATH9K is not set
# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWL4965 is not set
+# CONFIG_IWLAGN is not set
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
+# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
#
# Display device support
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# LED drivers
#
+# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
+# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
# Firmware Drivers
#
# CONFIG_EDD is not set
+CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
-# CONFIG_ISCSI_IBFT_FIND is not set
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=y
#
# File systems
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SYSPROF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not set
-# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
+CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DIRECT_GBPAGES is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
-CONFIG_X86_MPPARSE=y
# CONFIG_IOMMU_DEBUG is not set
+# CONFIG_MMIOTRACE is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
+CONFIG_OPTIMIZE_INLINING=y
#
# Security options
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
dump->regs.ax = regs->ax;
dump->regs.ds = current->thread.ds;
dump->regs.es = current->thread.es;
- asm("movl %%fs,%0" : "=r" (fs)); dump->regs.fs = fs;
- asm("movl %%gs,%0" : "=r" (gs)); dump->regs.gs = gs;
+ savesegment(fs, fs);
+ dump->regs.fs = fs;
+ savesegment(gs, gs);
+ dump->regs.gs = gs;
dump->regs.orig_ax = regs->orig_ax;
dump->regs.ip = regs->ip;
dump->regs.cs = regs->cs;
current->mm->start_stack =
(unsigned long)create_aout_tables((char __user *)bprm->p, bprm);
/* start thread */
- asm volatile("movl %0,%%fs" :: "r" (0)); \
- asm volatile("movl %0,%%es; movl %0,%%ds": :"r" (__USER32_DS));
+ loadsegment(fs, 0);
+ loadsegment(ds, __USER32_DS);
+ loadsegment(es, __USER32_DS);
load_gs_index(0);
(regs)->ip = ex.a_entry;
(regs)->sp = current->mm->start_stack;
{ unsigned int cur; \
unsigned short pre; \
err |= __get_user(pre, &sc->seg); \
- asm volatile("movl %%" #seg ",%0" : "=r" (cur)); \
+ savesegment(seg, cur); \
pre |= mask; \
if (pre != cur) loadsegment(seg, pre); }
*/
err |= __get_user(gs, &sc->gs);
gs |= 3;
- asm("movl %%gs,%0" : "=r" (oldgs));
+ savesegment(gs, oldgs);
if (gs != oldgs)
load_gs_index(gs);
{
int tmp, err = 0;
- tmp = 0;
- __asm__("movl %%gs,%0" : "=r"(tmp): "0"(tmp));
+ savesegment(gs, tmp);
err |= __put_user(tmp, (unsigned int __user *)&sc->gs);
- __asm__("movl %%fs,%0" : "=r"(tmp): "0"(tmp));
+ savesegment(fs, tmp);
err |= __put_user(tmp, (unsigned int __user *)&sc->fs);
- __asm__("movl %%ds,%0" : "=r"(tmp): "0"(tmp));
+ savesegment(ds, tmp);
err |= __put_user(tmp, (unsigned int __user *)&sc->ds);
- __asm__("movl %%es,%0" : "=r"(tmp): "0"(tmp));
+ savesegment(es, tmp);
err |= __put_user(tmp, (unsigned int __user *)&sc->es);
err |= __put_user((u32)regs->di, &sc->di);
regs->dx = 0;
regs->cx = 0;
- asm volatile("movl %0,%%ds" :: "r" (__USER32_DS));
- asm volatile("movl %0,%%es" :: "r" (__USER32_DS));
+ loadsegment(ds, __USER32_DS);
+ loadsegment(es, __USER32_DS);
regs->cs = __USER32_CS;
regs->ss = __USER32_DS;
regs->dx = (unsigned long) &frame->info;
regs->cx = (unsigned long) &frame->uc;
- asm volatile("movl %0,%%ds" :: "r" (__USER32_DS));
- asm volatile("movl %0,%%es" :: "r" (__USER32_DS));
+ loadsegment(ds, __USER32_DS);
+ loadsegment(es, __USER32_DS);
regs->cs = __USER32_CS;
regs->ss = __USER32_DS;
return ret;
}
-/* These are here just in case some old ia32 binary calls it. */
-asmlinkage long sys32_pause(void)
-{
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- return -ERESTARTNOHAND;
-}
-
-
#ifdef CONFIG_SYSCTL_SYSCALL
struct sysctl_ia32 {
unsigned int name;
#ifdef CONFIG_X86_64
#include <asm/proto.h>
-#include <asm/genapic.h>
#else /* X86 */
#warning ACPI uses CMPXCHG, i486 and later hardware
#endif
-static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
-
/* --------------------------------------------------------------------------
Boot-time Configuration
-------------------------------------------------------------------------- */
struct acpi_mcfg_allocation *pci_mmcfg_config;
int pci_mmcfg_config_num;
+static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
+
static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
{
if (!strcmp(mcfg->header.oem_id, "SGI"))
extern char __vsyscall_0;
const unsigned char *const *find_nop_table(void)
{
- return boot_cpu_data.x86_vendor != X86_VENDOR_INTEL ||
- boot_cpu_data.x86 < 6 ? k8_nops : p6_nops;
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+ boot_cpu_has(X86_FEATURE_NOPL))
+ return p6_nops;
+ else
+ return k8_nops;
}
#else /* CONFIG_X86_64 */
-static const struct nop {
- int cpuid;
- const unsigned char *const *noptable;
-} noptypes[] = {
- { X86_FEATURE_K8, k8_nops },
- { X86_FEATURE_K7, k7_nops },
- { X86_FEATURE_P4, p6_nops },
- { X86_FEATURE_P3, p6_nops },
- { -1, NULL }
-};
-
const unsigned char *const *find_nop_table(void)
{
- const unsigned char *const *noptable = intel_nops;
- int i;
-
- for (i = 0; noptypes[i].cpuid >= 0; i++) {
- if (boot_cpu_has(noptypes[i].cpuid)) {
- noptable = noptypes[i].noptable;
- break;
- }
- }
- return noptable;
+ if (boot_cpu_has(X86_FEATURE_K8))
+ return k8_nops;
+ else if (boot_cpu_has(X86_FEATURE_K7))
+ return k7_nops;
+ else if (boot_cpu_has(X86_FEATURE_NOPL))
+ return p6_nops;
+ else
+ return intel_nops;
}
#endif /* CONFIG_X86_64 */
continue;
if (*ptr > text_end)
continue;
- text_poke(*ptr, ((unsigned char []){0xf0}), 1); /* add lock prefix */
+ /* turn DS segment override prefix into lock prefix */
+ text_poke(*ptr, ((unsigned char []){0xf0}), 1);
};
}
static void alternatives_smp_unlock(u8 **start, u8 **end, u8 *text, u8 *text_end)
{
u8 **ptr;
- char insn[1];
if (noreplace_smp)
return;
- add_nops(insn, 1);
for (ptr = start; ptr < end; ptr++) {
if (*ptr < text)
continue;
if (*ptr > text_end)
continue;
- text_poke(*ptr, insn, 1);
+ /* turn lock prefix into DS segment override prefix */
+ text_poke(*ptr, ((unsigned char []){0x3E}), 1);
};
}
*/
static int iommu_completion_wait(struct amd_iommu *iommu)
{
- int ret, ready = 0;
+ int ret = 0, ready = 0;
unsigned status = 0;
struct iommu_cmd cmd;
- unsigned long i = 0;
+ unsigned long flags, i = 0;
memset(&cmd, 0, sizeof(cmd));
cmd.data[0] = CMD_COMPL_WAIT_INT_MASK;
iommu->need_sync = 0;
- ret = iommu_queue_command(iommu, &cmd);
+ spin_lock_irqsave(&iommu->lock, flags);
+
+ ret = __iommu_queue_command(iommu, &cmd);
if (ret)
- return ret;
+ goto out;
while (!ready && (i < EXIT_LOOP_COUNT)) {
++i;
if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit()))
printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n");
+out:
+ spin_unlock_irqrestore(&iommu->lock, flags);
return 0;
}
static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid)
{
struct iommu_cmd cmd;
+ int ret;
BUG_ON(iommu == NULL);
CMD_SET_TYPE(&cmd, CMD_INV_DEV_ENTRY);
cmd.data[0] = devid;
+ ret = iommu_queue_command(iommu, &cmd);
+
iommu->need_sync = 1;
- return iommu_queue_command(iommu, &cmd);
+ return ret;
}
/*
u64 address, u16 domid, int pde, int s)
{
struct iommu_cmd cmd;
+ int ret;
memset(&cmd, 0, sizeof(cmd));
address &= PAGE_MASK;
if (pde) /* PDE bit - we wan't flush everything not only the PTEs */
cmd.data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK;
+ ret = iommu_queue_command(iommu, &cmd);
+
iommu->need_sync = 1;
- return iommu_queue_command(iommu, &cmd);
+ return ret;
}
/*
force_iommu ||
valid_agp ||
fallback_aper_force) {
- printk(KERN_ERR
+ printk(KERN_INFO
"Your BIOS doesn't leave a aperture memory hole\n");
- printk(KERN_ERR
+ printk(KERN_INFO
"Please enable the IOMMU option in the BIOS setup\n");
- printk(KERN_ERR
+ printk(KERN_INFO
"This costs you %d MB of RAM\n",
32 << fallback_aper_order);
#include <linux/suspend.h>
#include <linux/kthread.h>
#include <linux/jiffies.h>
-#include <linux/smp_lock.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/desc.h>
#include <asm/i8253.h>
+#include <asm/olpc.h>
#include <asm/paravirt.h>
#include <asm/reboot.h>
dmi_check_system(apm_dmi_table);
- if (apm_info.bios.version == 0 || paravirt_enabled()) {
+ if (apm_info.bios.version == 0 || paravirt_enabled() || machine_is_olpc()) {
printk(KERN_INFO "apm: BIOS not found.\n");
return -ENODEV;
}
#define __NO_STUBS 1
#undef __SYSCALL
-#undef _ASM_X86_64_UNISTD_H_
+#undef ASM_X86__UNISTD_64_H
#define __SYSCALL(nr, sym) [nr] = 1,
static char syscalls[] = {
#include <asm/unistd.h>
{
const char *str;
switch (status) {
- case 0: str = "Call completed without error"; break;
- case -1: str = "Not implemented"; break;
- case -2: str = "Invalid argument"; break;
- case -3: str = "Call completed with error"; break;
- default: str = "Unknown BIOS status code"; break;
+ case 0: str = "Call completed without error"; break;
+ case -1: str = "Not implemented"; break;
+ case -2: str = "Invalid argument"; break;
+ case -3: str = "Call completed with error"; break;
+ default: str = "Unknown BIOS status code"; break;
}
return str;
}
if (c->x86_power & (1<<8))
set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
}
+
+ /* Set MTRR capability flag if appropriate */
+ if (c->x86_model == 13 || c->x86_model == 9 ||
+ (c->x86_model == 8 && c->x86_mask >= 8))
+ set_cpu_cap(c, X86_FEATURE_K6_MTRR);
}
static void __cpuinit init_amd(struct cpuinfo_x86 *c)
mbytes);
}
- /* Set MTRR capability flag if appropriate */
- if (c->x86_model == 13 || c->x86_model == 9 ||
- (c->x86_model == 8 && c->x86_mask >= 8))
- set_cpu_cap(c, X86_FEATURE_K6_MTRR);
break;
}
EAMD3D = 1<<20,
};
+static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
+{
+ switch (c->x86) {
+ case 5:
+ /* Emulate MTRRs using Centaur's MCR. */
+ set_cpu_cap(c, X86_FEATURE_CENTAUR_MCR);
+ break;
+ }
+}
+
static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
{
static struct cpu_dev centaur_cpu_dev __cpuinitdata = {
.c_vendor = "Centaur",
.c_ident = { "CentaurHauls" },
+ .c_early_init = early_init_centaur,
.c_init = init_centaur,
.c_size_cache = centaur_size_cache,
};
#include <asm/mtrr.h>
#include <asm/mce.h>
#include <asm/pat.h>
+#include <asm/asm.h>
#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/mpspec.h>
#include <asm/apic.h>
get_cpu_vendor(c, 1);
+ early_get_cap(c);
+
if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
cpu_devs[c->x86_vendor]->c_early_init)
cpu_devs[c->x86_vendor]->c_early_init(c);
+}
- early_get_cap(c);
+/*
+ * The NOPL instruction is supposed to exist on all CPUs with
+ * family >= 6; unfortunately, that's not true in practice because
+ * of early VIA chips and (more importantly) broken virtualizers that
+ * are not easy to detect. In the latter case it doesn't even *fail*
+ * reliably, so probing for it doesn't even work. Disable it completely
+ * unless we can find a reliable way to detect all the broken cases.
+ */
+static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
+{
+ clear_cpu_cap(c, X86_FEATURE_NOPL);
}
static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
}
init_scattered_cpuid_features(c);
+ detect_nopl(c);
}
-
}
static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
#include <asm/mtrr.h>
#include <asm/mce.h>
#include <asm/pat.h>
+#include <asm/asm.h>
#include <asm/numa.h>
#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/mpspec.h>
}
}
+/*
+ * The NOPL instruction is supposed to exist on all CPUs with
+ * family >= 6, unfortunately, that's not true in practice because
+ * of early VIA chips and (more importantly) broken virtualizers that
+ * are not easy to detect. Hence, probe for it based on first
+ * principles.
+ *
+ * Note: no 64-bit chip is known to lack these, but put the code here
+ * for consistency with 32 bits, and to make it utterly trivial to
+ * diagnose the problem should it ever surface.
+ */
+static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
+{
+ const u32 nopl_signature = 0x888c53b1; /* Random number */
+ u32 has_nopl = nopl_signature;
+
+ clear_cpu_cap(c, X86_FEATURE_NOPL);
+ if (c->x86 >= 6) {
+ asm volatile("\n"
+ "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
+ "2:\n"
+ " .section .fixup,\"ax\"\n"
+ "3: xor %0,%0\n"
+ " jmp 2b\n"
+ " .previous\n"
+ _ASM_EXTABLE(1b,3b)
+ : "+a" (has_nopl));
+
+ if (has_nopl == nopl_signature)
+ set_cpu_cap(c, X86_FEATURE_NOPL);
+ }
+}
+
static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
void __init early_cpu_init(void)
c->x86_phys_bits = eax & 0xff;
}
+ detect_nopl(c);
+
if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
cpu_devs[c->x86_vendor]->c_early_init)
cpu_devs[c->x86_vendor]->c_early_init(c);
}
__setup("noclflush", setup_noclflush);
+struct msr_range {
+ unsigned min;
+ unsigned max;
+};
+
+static struct msr_range msr_range_array[] __cpuinitdata = {
+ { 0x00000000, 0x00000418},
+ { 0xc0000000, 0xc000040b},
+ { 0xc0010000, 0xc0010142},
+ { 0xc0011000, 0xc001103b},
+};
+
+static void __cpuinit print_cpu_msr(void)
+{
+ unsigned index;
+ u64 val;
+ int i;
+ unsigned index_min, index_max;
+
+ for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) {
+ index_min = msr_range_array[i].min;
+ index_max = msr_range_array[i].max;
+ for (index = index_min; index < index_max; index++) {
+ if (rdmsrl_amd_safe(index, &val))
+ continue;
+ printk(KERN_INFO " MSR%08x: %016llx\n", index, val);
+ }
+ }
+}
+
+static int show_msr __cpuinitdata;
+static __init int setup_show_msr(char *arg)
+{
+ int num;
+
+ get_option(&arg, &num);
+
+ if (num > 0)
+ show_msr = num;
+ return 1;
+}
+__setup("show_msr=", setup_show_msr);
+
void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
{
if (c->x86_model_id[0])
printk(KERN_CONT " stepping %02x\n", c->x86_mask);
else
printk(KERN_CONT "\n");
+
+#ifdef CONFIG_SMP
+ if (c->cpu_index < show_msr)
+ print_cpu_msr();
+#else
+ if (show_msr)
+ print_cpu_msr();
+#endif
}
static __init int setup_disablecpuid(char *arg)
/* others are initialized in smpboot.c */
pda->pcurrent = &init_task;
pda->irqstackptr = boot_cpu_stack;
+ pda->irqstackptr += IRQSTACKSIZE - 64;
} else {
- pda->irqstackptr = (char *)
- __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
- if (!pda->irqstackptr)
- panic("cannot allocate irqstack for cpu %d", cpu);
+ if (!pda->irqstackptr) {
+ pda->irqstackptr = (char *)
+ __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
+ if (!pda->irqstackptr)
+ panic("cannot allocate irqstack for cpu %d",
+ cpu);
+ pda->irqstackptr += IRQSTACKSIZE - 64;
+ }
if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
pda->nodenumber = cpu_to_node(cpu);
}
-
- pda->irqstackptr += IRQSTACKSIZE-64;
}
char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
/*
* set up and load the per-CPU TSS
*/
- for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+ if (!orig_ist->ist[0]) {
static const unsigned int order[N_EXCEPTION_STACKS] = {
- [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
- [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
+ [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
+ [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
};
- if (cpu) {
- estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
- if (!estacks)
- panic("Cannot allocate exception stack %ld %d\n",
- v, cpu);
+ for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+ if (cpu) {
+ estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
+ if (!estacks)
+ panic("Cannot allocate exception "
+ "stack %ld %d\n", v, cpu);
+ }
+ estacks += PAGE_SIZE << order[v];
+ orig_ist->ist[v] = t->x86_tss.ist[v] =
+ (unsigned long)estacks;
}
- estacks += PAGE_SIZE << order[v];
- orig_ist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks;
}
t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
/*
* Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
*/
-static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+static void __cpuinit __do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
{
unsigned char ccr2, ccr3;
- unsigned long flags;
/* we test for DEVID by checking whether CCR3 is writable */
- local_irq_save(flags);
ccr3 = getCx86(CX86_CCR3);
setCx86(CX86_CCR3, ccr3 ^ 0x80);
getCx86(0xc0); /* dummy to change bus */
*dir0 = getCx86(CX86_DIR0);
*dir1 = getCx86(CX86_DIR1);
}
- local_irq_restore(flags);
}
+static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ __do_cyrix_devid(dir0, dir1);
+ local_irq_restore(flags);
+}
/*
* Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in
* order to identify the Cyrix CPU model after we're out of setup.c
local_irq_restore(flags);
}
+static void __cpuinit early_init_cyrix(struct cpuinfo_x86 *c)
+{
+ unsigned char dir0, dir0_msn, dir1 = 0;
+
+ __do_cyrix_devid(&dir0, &dir1);
+ dir0_msn = dir0 >> 4; /* identifies CPU "family" */
+
+ switch (dir0_msn) {
+ case 3: /* 6x86/6x86L */
+ /* Emulate MTRRs using Cyrix's ARRs. */
+ set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+ break;
+ case 5: /* 6x86MX/M II */
+ /* Emulate MTRRs using Cyrix's ARRs. */
+ set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+ break;
+ }
+}
static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
{
static struct cpu_dev cyrix_cpu_dev __cpuinitdata = {
.c_vendor = "Cyrix",
.c_ident = { "CyrixInstead" },
+ .c_early_init = early_init_cyrix,
.c_init = init_cyrix,
.c_identify = cyrix_identify,
};
NULL, NULL, NULL, NULL,
"constant_tsc", "up", NULL, "arch_perfmon",
"pebs", "bts", NULL, NULL,
- "rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ "rep_good", NULL, NULL, NULL,
+ "nopl", NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* Intel-defined (#2) */
set_cpu_cap(c, X86_FEATURE_BTS);
if (!(l1 & (1<<12)))
set_cpu_cap(c, X86_FEATURE_PEBS);
+ ds_init_intel(c);
}
if (cpu_has_bts)
- ds_init_intel(c);
+ ptrace_bts_init_intel(c);
/*
* See if we have a good local APIC by checking for buggy Pentia,
tmp |= ~((1<<(hi - 1)) - 1);
if (tmp != mask_lo) {
- static int once = 1;
-
- if (once) {
- printk(KERN_INFO "mtrr: your BIOS has set up an incorrect mask, fixing it up.\n");
- once = 0;
- }
+ WARN_ONCE(1, KERN_INFO "mtrr: your BIOS has set up an incorrect mask, fixing it up.\n");
mask_lo = tmp;
}
}
}
/* RED-PEN: base can be > 32bit */
len += seq_printf(seq,
- "reg%02i: base=0x%05lx000 (%4luMB), size=%4lu%cB: %s, count=%d\n",
+ "reg%02i: base=0x%06lx000 (%5luMB), size=%5lu%cB, count=%d: %s\n",
i, base, base >> (20 - PAGE_SHIFT), size, factor,
- mtrr_attrib_to_str(type), mtrr_usage_table[i]);
+ mtrr_usage_table[i], mtrr_attrib_to_str(type));
}
}
return 0;
mtrr_type type;
};
-struct var_mtrr_range_state __initdata range_state[RANGE_NUM];
+static struct var_mtrr_range_state __initdata range_state[RANGE_NUM];
static int __initdata debug_print;
static int __init
/* take out UC ranges */
for (i = 0; i < num_var_ranges; i++) {
type = range_state[i].type;
- if (type != MTRR_TYPE_UNCACHABLE)
+ if (type != MTRR_TYPE_UNCACHABLE &&
+ type != MTRR_TYPE_WRPROT)
continue;
size = range_state[i].size_pfn;
if (!size)
enable_mtrr_cleanup = 1;
return 0;
}
-early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup);
+early_param("enable_mtrr_cleanup", enable_mtrr_cleanup_setup);
+
+static int __init mtrr_cleanup_debug_setup(char *str)
+{
+ debug_print = 1;
+ return 0;
+}
+early_param("mtrr_cleanup_debug", mtrr_cleanup_debug_setup);
struct var_mtrr_state {
unsigned long range_startk;
}
}
+static unsigned long to_size_factor(unsigned long sizek, char *factorp)
+{
+ char factor;
+ unsigned long base = sizek;
+
+ if (base & ((1<<10) - 1)) {
+ /* not MB alignment */
+ factor = 'K';
+ } else if (base & ((1<<20) - 1)){
+ factor = 'M';
+ base >>= 10;
+ } else {
+ factor = 'G';
+ base >>= 20;
+ }
+
+ *factorp = factor;
+
+ return base;
+}
+
static unsigned int __init
range_to_mtrr(unsigned int reg, unsigned long range_startk,
unsigned long range_sizek, unsigned char type)
align = max_align;
sizek = 1 << align;
- if (debug_print)
+ if (debug_print) {
+ char start_factor = 'K', size_factor = 'K';
+ unsigned long start_base, size_base;
+
+ start_base = to_size_factor(range_startk, &start_factor),
+ size_base = to_size_factor(sizek, &size_factor),
+
printk(KERN_DEBUG "Setting variable MTRR %d, "
- "base: %ldMB, range: %ldMB, type %s\n",
- reg, range_startk >> 10, sizek >> 10,
+ "base: %ld%cB, range: %ld%cB, type %s\n",
+ reg, start_base, start_factor,
+ size_base, size_factor,
(type == MTRR_TYPE_UNCACHABLE)?"UC":
((type == MTRR_TYPE_WRBACK)?"WB":"Other")
);
+ }
save_var_mtrr(reg++, range_startk, sizek, type);
range_startk += sizek;
range_sizek -= sizek;
/* try to append some small hole */
range0_basek = state->range_startk;
range0_sizek = ALIGN(state->range_sizek, chunk_sizek);
+
+ /* no increase */
if (range0_sizek == state->range_sizek) {
if (debug_print)
printk(KERN_DEBUG "rangeX: %016lx - %016lx\n",
return 0;
}
- range0_sizek -= chunk_sizek;
- if (range0_sizek && sizek) {
- while (range0_basek + range0_sizek > (basek + sizek)) {
- range0_sizek -= chunk_sizek;
- if (!range0_sizek)
- break;
- }
+ /* only cut back, when it is not the last */
+ if (sizek) {
+ while (range0_basek + range0_sizek > (basek + sizek)) {
+ if (range0_sizek >= chunk_sizek)
+ range0_sizek -= chunk_sizek;
+ else
+ range0_sizek = 0;
+
+ if (!range0_sizek)
+ break;
+ }
+ }
+
+second_try:
+ range_basek = range0_basek + range0_sizek;
+
+ /* one hole in the middle */
+ if (range_basek > basek && range_basek <= (basek + sizek))
+ second_sizek = range_basek - basek;
+
+ if (range0_sizek > state->range_sizek) {
+
+ /* one hole in middle or at end */
+ hole_sizek = range0_sizek - state->range_sizek - second_sizek;
+
+ /* hole size should be less than half of range0 size */
+ if (hole_sizek >= (range0_sizek >> 1) &&
+ range0_sizek >= chunk_sizek) {
+ range0_sizek -= chunk_sizek;
+ second_sizek = 0;
+ hole_sizek = 0;
+
+ goto second_try;
+ }
}
if (range0_sizek) {
(range0_basek + range0_sizek)<<10);
state->reg = range_to_mtrr(state->reg, range0_basek,
range0_sizek, MTRR_TYPE_WRBACK);
-
- }
-
- range_basek = range0_basek + range0_sizek;
- range_sizek = chunk_sizek;
-
- if (range_basek + range_sizek > basek &&
- range_basek + range_sizek <= (basek + sizek)) {
- /* one hole */
- second_basek = basek;
- second_sizek = range_basek + range_sizek - basek;
}
- /* if last piece, only could one hole near end */
- if ((second_basek || !basek) &&
- range_sizek - (state->range_sizek - range0_sizek) - second_sizek <
- (chunk_sizek >> 1)) {
- /*
- * one hole in middle (second_sizek is 0) or at end
- * (second_sizek is 0 )
- */
- hole_sizek = range_sizek - (state->range_sizek - range0_sizek)
- - second_sizek;
- hole_basek = range_basek + range_sizek - hole_sizek
- - second_sizek;
- } else {
- /* fallback for big hole, or several holes */
+ if (range0_sizek < state->range_sizek) {
+ /* need to handle left over */
range_sizek = state->range_sizek - range0_sizek;
- second_basek = 0;
- second_sizek = 0;
+
+ if (debug_print)
+ printk(KERN_DEBUG "range: %016lx - %016lx\n",
+ range_basek<<10,
+ (range_basek + range_sizek)<<10);
+ state->reg = range_to_mtrr(state->reg, range_basek,
+ range_sizek, MTRR_TYPE_WRBACK);
}
- if (debug_print)
- printk(KERN_DEBUG "range: %016lx - %016lx\n", range_basek<<10,
- (range_basek + range_sizek)<<10);
- state->reg = range_to_mtrr(state->reg, range_basek, range_sizek,
- MTRR_TYPE_WRBACK);
if (hole_sizek) {
+ hole_basek = range_basek - hole_sizek - second_sizek;
if (debug_print)
printk(KERN_DEBUG "hole: %016lx - %016lx\n",
- hole_basek<<10, (hole_basek + hole_sizek)<<10);
- state->reg = range_to_mtrr(state->reg, hole_basek, hole_sizek,
- MTRR_TYPE_UNCACHABLE);
-
+ hole_basek<<10,
+ (hole_basek + hole_sizek)<<10);
+ state->reg = range_to_mtrr(state->reg, hole_basek,
+ hole_sizek, MTRR_TYPE_UNCACHABLE);
}
return second_sizek;
};
/*
- * gran_size: 1M, 2M, ..., 2G
- * chunk size: gran_size, ..., 4G
- * so we need (2+13)*6
+ * gran_size: 64K, 128K, 256K, 512K, 1M, 2M, ..., 2G
+ * chunk size: gran_size, ..., 2G
+ * so we need (1+16)*8
*/
-#define NUM_RESULT 90
+#define NUM_RESULT 136
#define PSHIFT (PAGE_SHIFT - 10)
static struct mtrr_cleanup_result __initdata result[NUM_RESULT];
static int __init mtrr_cleanup(unsigned address_bits)
{
unsigned long extra_remove_base, extra_remove_size;
- unsigned long i, base, size, def, dummy;
+ unsigned long base, size, def, dummy;
mtrr_type type;
int nr_range, nr_range_new;
u64 chunk_size, gran_size;
unsigned long range_sums, range_sums_new;
int index_good;
int num_reg_good;
+ int i;
/* extra one for all 0 */
int num[MTRR_NUM_TYPES + 1];
continue;
if (!size)
type = MTRR_NUM_TYPES;
+ if (type == MTRR_TYPE_WRPROT)
+ type = MTRR_TYPE_UNCACHABLE;
num[type]++;
}
num_var_ranges - num[MTRR_NUM_TYPES])
return 0;
+ /* print original var MTRRs at first, for debugging: */
+ printk(KERN_DEBUG "original variable MTRRs\n");
+ for (i = 0; i < num_var_ranges; i++) {
+ char start_factor = 'K', size_factor = 'K';
+ unsigned long start_base, size_base;
+
+ size_base = range_state[i].size_pfn << (PAGE_SHIFT - 10);
+ if (!size_base)
+ continue;
+
+ size_base = to_size_factor(size_base, &size_factor),
+ start_base = range_state[i].base_pfn << (PAGE_SHIFT - 10);
+ start_base = to_size_factor(start_base, &start_factor),
+ type = range_state[i].type;
+
+ printk(KERN_DEBUG "reg %d, base: %ld%cB, range: %ld%cB, type %s\n",
+ i, start_base, start_factor,
+ size_base, size_factor,
+ (type == MTRR_TYPE_UNCACHABLE) ? "UC" :
+ ((type == MTRR_TYPE_WRPROT) ? "WP" :
+ ((type == MTRR_TYPE_WRBACK) ? "WB" : "Other"))
+ );
+ }
+
memset(range, 0, sizeof(range));
extra_remove_size = 0;
- if (mtrr_tom2) {
- extra_remove_base = 1 << (32 - PAGE_SHIFT);
+ extra_remove_base = 1 << (32 - PAGE_SHIFT);
+ if (mtrr_tom2)
extra_remove_size =
(mtrr_tom2 >> PAGE_SHIFT) - extra_remove_base;
- }
nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base,
extra_remove_size);
+ /*
+ * [0, 1M) should always be coverred by var mtrr with WB
+ * and fixed mtrrs should take effective before var mtrr for it
+ */
+ nr_range = add_range_with_merge(range, nr_range, 0,
+ (1ULL<<(20 - PAGE_SHIFT)) - 1);
+ /* sort the ranges */
+ sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL);
+
range_sums = sum_ranges(range, nr_range);
printk(KERN_INFO "total RAM coverred: %ldM\n",
range_sums >> (20 - PAGE_SHIFT));
if (mtrr_chunk_size && mtrr_gran_size) {
int num_reg;
+ char gran_factor, chunk_factor, lose_factor;
+ unsigned long gran_base, chunk_base, lose_base;
- debug_print = 1;
+ debug_print++;
/* convert ranges to var ranges state */
num_reg = x86_setup_var_mtrrs(range, nr_range, mtrr_chunk_size,
mtrr_gran_size);
result[i].lose_cover_sizek =
(range_sums - range_sums_new) << PSHIFT;
- printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t",
- result[i].bad?"*BAD*":" ", result[i].gran_sizek >> 10,
- result[i].chunk_sizek >> 10);
- printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ldM \n",
+ gran_base = to_size_factor(result[i].gran_sizek, &gran_factor),
+ chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor),
+ lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor),
+ printk(KERN_INFO "%sgran_size: %ld%c \tchunk_size: %ld%c \t",
+ result[i].bad?"*BAD*":" ",
+ gran_base, gran_factor, chunk_base, chunk_factor);
+ printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ld%c\n",
result[i].num_reg, result[i].bad?"-":"",
- result[i].lose_cover_sizek >> 10);
+ lose_base, lose_factor);
if (!result[i].bad) {
set_var_mtrr_all(address_bits);
return 1;
}
printk(KERN_INFO "invalid mtrr_gran_size or mtrr_chunk_size, "
"will find optimal one\n");
- debug_print = 0;
+ debug_print--;
memset(result, 0, sizeof(result[0]));
}
i = 0;
memset(min_loss_pfn, 0xff, sizeof(min_loss_pfn));
memset(result, 0, sizeof(result));
- for (gran_size = (1ULL<<20); gran_size < (1ULL<<32); gran_size <<= 1) {
- for (chunk_size = gran_size; chunk_size < (1ULL<<33);
+ for (gran_size = (1ULL<<16); gran_size < (1ULL<<32); gran_size <<= 1) {
+ char gran_factor;
+ unsigned long gran_base;
+
+ if (debug_print)
+ gran_base = to_size_factor(gran_size >> 10, &gran_factor);
+
+ for (chunk_size = gran_size; chunk_size < (1ULL<<32);
chunk_size <<= 1) {
int num_reg;
- if (debug_print)
- printk(KERN_INFO
- "\ngran_size: %lldM chunk_size_size: %lldM\n",
- gran_size >> 20, chunk_size >> 20);
+ if (debug_print) {
+ char chunk_factor;
+ unsigned long chunk_base;
+
+ chunk_base = to_size_factor(chunk_size>>10, &chunk_factor),
+ printk(KERN_INFO "\n");
+ printk(KERN_INFO "gran_size: %ld%c chunk_size: %ld%c \n",
+ gran_base, gran_factor, chunk_base, chunk_factor);
+ }
if (i >= NUM_RESULT)
continue;
/* print out all */
for (i = 0; i < NUM_RESULT; i++) {
- printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t",
- result[i].bad?"*BAD* ":" ", result[i].gran_sizek >> 10,
- result[i].chunk_sizek >> 10);
- printk(KERN_CONT "num_reg: %d \tlose RAM: %s%ldM\n",
- result[i].num_reg, result[i].bad?"-":"",
- result[i].lose_cover_sizek >> 10);
+ char gran_factor, chunk_factor, lose_factor;
+ unsigned long gran_base, chunk_base, lose_base;
+
+ gran_base = to_size_factor(result[i].gran_sizek, &gran_factor),
+ chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor),
+ lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor),
+ printk(KERN_INFO "%sgran_size: %ld%c \tchunk_size: %ld%c \t",
+ result[i].bad?"*BAD*":" ",
+ gran_base, gran_factor, chunk_base, chunk_factor);
+ printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ld%c\n",
+ result[i].num_reg, result[i].bad?"-":"",
+ lose_base, lose_factor);
}
/* try to find the optimal index */
nr_mtrr_spare_reg = num_var_ranges - 1;
num_reg_good = -1;
for (i = num_var_ranges - nr_mtrr_spare_reg; i > 0; i--) {
- if (!min_loss_pfn[i]) {
+ if (!min_loss_pfn[i])
num_reg_good = i;
- break;
- }
}
index_good = -1;
}
if (index_good != -1) {
+ char gran_factor, chunk_factor, lose_factor;
+ unsigned long gran_base, chunk_base, lose_base;
+
printk(KERN_INFO "Found optimal setting for mtrr clean up\n");
i = index_good;
- printk(KERN_INFO "gran_size: %ldM \tchunk_size: %ldM \t",
- result[i].gran_sizek >> 10,
- result[i].chunk_sizek >> 10);
- printk(KERN_CONT "num_reg: %d \tlose RAM: %ldM\n",
- result[i].num_reg,
- result[i].lose_cover_sizek >> 10);
+ gran_base = to_size_factor(result[i].gran_sizek, &gran_factor),
+ chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor),
+ lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor),
+ printk(KERN_INFO "gran_size: %ld%c \tchunk_size: %ld%c \t",
+ gran_base, gran_factor, chunk_base, chunk_factor);
+ printk(KERN_CONT "num_reg: %d \tlose RAM: %ld%c\n",
+ result[i].num_reg, lose_base, lose_factor);
/* convert ranges to var ranges state */
chunk_size = result[i].chunk_sizek;
chunk_size <<= 10;
gran_size = result[i].gran_sizek;
gran_size <<= 10;
- debug_print = 1;
+ debug_print++;
x86_setup_var_mtrrs(range, nr_range, chunk_size, gran_size);
+ debug_print--;
set_var_mtrr_all(address_bits);
return 1;
}
/* setup the timer */
wrmsr(evntsel_msr, evntsel, 0);
write_watchdog_counter(perfctr_msr, "K7_PERFCTR0",nmi_hz);
- apic_write(APIC_LVTPC, APIC_DM_NMI);
- evntsel |= K7_EVNTSEL_ENABLE;
- wrmsr(evntsel_msr, evntsel, 0);
+ /* initialize the wd struct before enabling */
wd->perfctr_msr = perfctr_msr;
wd->evntsel_msr = evntsel_msr;
wd->cccr_msr = 0; /* unused */
+
+ /* ok, everything is initialized, announce that we're set */
+ cpu_nmi_set_wd_enabled();
+
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ evntsel |= K7_EVNTSEL_ENABLE;
+ wrmsr(evntsel_msr, evntsel, 0);
+
return 1;
}
wrmsr(evntsel_msr, evntsel, 0);
nmi_hz = adjust_for_32bit_ctr(nmi_hz);
write_watchdog_counter32(perfctr_msr, "P6_PERFCTR0",nmi_hz);
- apic_write(APIC_LVTPC, APIC_DM_NMI);
- evntsel |= P6_EVNTSEL0_ENABLE;
- wrmsr(evntsel_msr, evntsel, 0);
+ /* initialize the wd struct before enabling */
wd->perfctr_msr = perfctr_msr;
wd->evntsel_msr = evntsel_msr;
wd->cccr_msr = 0; /* unused */
+
+ /* ok, everything is initialized, announce that we're set */
+ cpu_nmi_set_wd_enabled();
+
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ evntsel |= P6_EVNTSEL0_ENABLE;
+ wrmsr(evntsel_msr, evntsel, 0);
+
return 1;
}
#define P4_CCCR_ENABLE (1 << 12)
#define P4_CCCR_OVF (1 << 31)
+#define P4_CONTROLS 18
+static unsigned int p4_controls[18] = {
+ MSR_P4_BPU_CCCR0,
+ MSR_P4_BPU_CCCR1,
+ MSR_P4_BPU_CCCR2,
+ MSR_P4_BPU_CCCR3,
+ MSR_P4_MS_CCCR0,
+ MSR_P4_MS_CCCR1,
+ MSR_P4_MS_CCCR2,
+ MSR_P4_MS_CCCR3,
+ MSR_P4_FLAME_CCCR0,
+ MSR_P4_FLAME_CCCR1,
+ MSR_P4_FLAME_CCCR2,
+ MSR_P4_FLAME_CCCR3,
+ MSR_P4_IQ_CCCR0,
+ MSR_P4_IQ_CCCR1,
+ MSR_P4_IQ_CCCR2,
+ MSR_P4_IQ_CCCR3,
+ MSR_P4_IQ_CCCR4,
+ MSR_P4_IQ_CCCR5,
+};
/*
* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
* CRU_ESCR0 (with any non-null event selector) through a complemented
evntsel_msr = MSR_P4_CRU_ESCR0;
cccr_msr = MSR_P4_IQ_CCCR0;
cccr_val = P4_CCCR_OVF_PMI0 | P4_CCCR_ESCR_SELECT(4);
+
+ /*
+ * If we're on the kdump kernel or other situation, we may
+ * still have other performance counter registers set to
+ * interrupt and they'll keep interrupting forever because
+ * of the P4_CCCR_OVF quirk. So we need to ACK all the
+ * pending interrupts and disable all the registers here,
+ * before reenabling the NMI delivery. Refer to p4_rearm()
+ * about the P4_CCCR_OVF quirk.
+ */
+ if (reset_devices) {
+ unsigned int low, high;
+ int i;
+
+ for (i = 0; i < P4_CONTROLS; i++) {
+ rdmsr(p4_controls[i], low, high);
+ low &= ~(P4_CCCR_ENABLE | P4_CCCR_OVF);
+ wrmsr(p4_controls[i], low, high);
+ }
+ }
} else {
/* logical cpu 1 */
perfctr_msr = MSR_P4_IQ_PERFCTR1;
wrmsr(evntsel_msr, evntsel, 0);
wrmsr(cccr_msr, cccr_val, 0);
write_watchdog_counter(perfctr_msr, "P4_IQ_COUNTER0", nmi_hz);
- apic_write(APIC_LVTPC, APIC_DM_NMI);
- cccr_val |= P4_CCCR_ENABLE;
- wrmsr(cccr_msr, cccr_val, 0);
+
wd->perfctr_msr = perfctr_msr;
wd->evntsel_msr = evntsel_msr;
wd->cccr_msr = cccr_msr;
+
+ /* ok, everything is initialized, announce that we're set */
+ cpu_nmi_set_wd_enabled();
+
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ cccr_val |= P4_CCCR_ENABLE;
+ wrmsr(cccr_msr, cccr_val, 0);
return 1;
}
wrmsr(evntsel_msr, evntsel, 0);
nmi_hz = adjust_for_32bit_ctr(nmi_hz);
write_watchdog_counter32(perfctr_msr, "INTEL_ARCH_PERFCTR0", nmi_hz);
- apic_write(APIC_LVTPC, APIC_DM_NMI);
- evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE;
- wrmsr(evntsel_msr, evntsel, 0);
wd->perfctr_msr = perfctr_msr;
wd->evntsel_msr = evntsel_msr;
wd->cccr_msr = 0; /* unused */
+
+ /* ok, everything is initialized, announce that we're set */
+ cpu_nmi_set_wd_enabled();
+
+ apic_write(APIC_LVTPC, APIC_DM_NMI);
+ evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+ wrmsr(evntsel_msr, evntsel, 0);
intel_arch_wd_ops.checkbit = 1ULL << (eax.split.bit_width - 1);
return 1;
}
#include <linux/smp_lock.h>
#include <linux/major.h>
#include <linux/fs.h>
-#include <linux/smp_lock.h>
#include <linux/device.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
struct cpuid_regs cmd;
int cpu = iminor(file->f_path.dentry->d_inode);
u64 pos = *ppos;
+ ssize_t bytes = 0;
+ int err = 0;
if (count % 16)
return -EINVAL; /* Invalid chunk size */
for (; count; count -= 16) {
cmd.eax = pos;
cmd.ecx = pos >> 32;
- smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1);
- if (copy_to_user(tmp, &cmd, 16))
- return -EFAULT;
+ err = smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1);
+ if (err)
+ break;
+ if (copy_to_user(tmp, &cmd, 16)) {
+ err = -EFAULT;
+ break;
+ }
tmp += 16;
+ bytes += 16;
*ppos = ++pos;
}
- return tmp - buf;
+ return bytes ? bytes : err;
}
static int cpuid_open(struct inode *inode, struct file *file)
#include <linux/errno.h>
#include <linux/crash_dump.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
/**
* copy_oldmem_page - copy one page from "oldmem"
* in the current kernel. We stitch up a pte, similar to kmap_atomic.
*/
ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
- size_t csize, unsigned long offset, int userbuf)
+ size_t csize, unsigned long offset, int userbuf)
{
void *vaddr;
return 0;
vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
+ if (!vaddr)
+ return -ENOMEM;
if (userbuf) {
- if (copy_to_user(buf, (vaddr + offset), csize)) {
+ if (copy_to_user(buf, vaddr + offset, csize)) {
iounmap(vaddr);
return -EFAULT;
}
} else
- memcpy(buf, (vaddr + offset), csize);
+ memcpy(buf, vaddr + offset, csize);
iounmap(vaddr);
return csize;
* Debug Store support
*
* This provides a low-level interface to the hardware's Debug Store
- * feature that is used for last branch recording (LBR) and
+ * feature that is used for branch trace store (BTS) and
* precise-event based sampling (PEBS).
*
- * Different architectures use a different DS layout/pointer size.
- * The below functions therefore work on a void*.
+ * It manages:
+ * - per-thread and per-cpu allocation of BTS and PEBS
+ * - buffer memory allocation (optional)
+ * - buffer overflow handling
+ * - buffer access
*
+ * It assumes:
+ * - get_task_struct on all parameter tasks
+ * - current is allowed to trace parameter tasks
*
- * Since there is no user for PEBS, yet, only LBR (or branch
- * trace store, BTS) is supported.
*
- *
- * Copyright (C) 2007 Intel Corporation.
- * Markus Metzger <markus.t.metzger@intel.com>, Dec 2007
+ * Copyright (C) 2007-2008 Intel Corporation.
+ * Markus Metzger <markus.t.metzger@intel.com>, 2007-2008
*/
+
+#ifdef CONFIG_X86_DS
+
#include <asm/ds.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+
+
+/*
+ * The configuration for a particular DS hardware implementation.
+ */
+struct ds_configuration {
+ /* the size of the DS structure in bytes */
+ unsigned char sizeof_ds;
+ /* the size of one pointer-typed field in the DS structure in bytes;
+ this covers the first 8 fields related to buffer management. */
+ unsigned char sizeof_field;
+ /* the size of a BTS/PEBS record in bytes */
+ unsigned char sizeof_rec[2];
+};
+static struct ds_configuration ds_cfg;
/*
* (interrupt occurs when write pointer passes interrupt pointer)
* - value to which counter is reset following counter overflow
*
- * On later architectures, the last branch recording hardware uses
- * 64bit pointers even in 32bit mode.
- *
- *
- * Branch Trace Store (BTS) records store information about control
- * flow changes. They at least provide the following information:
- * - source linear address
- * - destination linear address
+ * Later architectures use 64bit pointers throughout, whereas earlier
+ * architectures use 32bit pointers in 32bit mode.
*
- * Netburst supported a predicated bit that had been dropped in later
- * architectures. We do not suppor it.
*
+ * We compute the base address for the first 8 fields based on:
+ * - the field size stored in the DS configuration
+ * - the relative field position
+ * - an offset giving the start of the respective region
*
- * In order to abstract from the actual DS and BTS layout, we describe
- * the access to the relevant fields.
- * Thanks to Andi Kleen for proposing this design.
+ * This offset is further used to index various arrays holding
+ * information for BTS and PEBS at the respective index.
*
- * The implementation, however, is not as general as it might seem. In
- * order to stay somewhat simple and efficient, we assume an
- * underlying unsigned type (mostly a pointer type) and we expect the
- * field to be at least as big as that type.
+ * On later 32bit processors, we only access the lower 32bit of the
+ * 64bit pointer fields. The upper halves will be zeroed out.
*/
-/*
- * A special from_ip address to indicate that the BTS record is an
- * info record that needs to be interpreted or skipped.
- */
-#define BTS_ESCAPE_ADDRESS (-1)
+enum ds_field {
+ ds_buffer_base = 0,
+ ds_index,
+ ds_absolute_maximum,
+ ds_interrupt_threshold,
+};
-/*
- * A field access descriptor
- */
-struct access_desc {
- unsigned char offset;
- unsigned char size;
+enum ds_qualifier {
+ ds_bts = 0,
+ ds_pebs
};
+static inline unsigned long ds_get(const unsigned char *base,
+ enum ds_qualifier qual, enum ds_field field)
+{
+ base += (ds_cfg.sizeof_field * (field + (4 * qual)));
+ return *(unsigned long *)base;
+}
+
+static inline void ds_set(unsigned char *base, enum ds_qualifier qual,
+ enum ds_field field, unsigned long value)
+{
+ base += (ds_cfg.sizeof_field * (field + (4 * qual)));
+ (*(unsigned long *)base) = value;
+}
+
+
/*
- * The configuration for a particular DS/BTS hardware implementation.
+ * Locking is done only for allocating BTS or PEBS resources and for
+ * guarding context and buffer memory allocation.
+ *
+ * Most functions require the current task to own the ds context part
+ * they are going to access. All the locking is done when validating
+ * access to the context.
*/
-struct ds_configuration {
- /* the DS configuration */
- unsigned char sizeof_ds;
- struct access_desc bts_buffer_base;
- struct access_desc bts_index;
- struct access_desc bts_absolute_maximum;
- struct access_desc bts_interrupt_threshold;
- /* the BTS configuration */
- unsigned char sizeof_bts;
- struct access_desc from_ip;
- struct access_desc to_ip;
- /* BTS variants used to store additional information like
- timestamps */
- struct access_desc info_type;
- struct access_desc info_data;
- unsigned long debugctl_mask;
-};
+static spinlock_t ds_lock = __SPIN_LOCK_UNLOCKED(ds_lock);
/*
- * The global configuration used by the below accessor functions
+ * Validate that the current task is allowed to access the BTS/PEBS
+ * buffer of the parameter task.
+ *
+ * Returns 0, if access is granted; -Eerrno, otherwise.
*/
-static struct ds_configuration ds_cfg;
+static inline int ds_validate_access(struct ds_context *context,
+ enum ds_qualifier qual)
+{
+ if (!context)
+ return -EPERM;
+
+ if (context->owner[qual] == current)
+ return 0;
+
+ return -EPERM;
+}
+
/*
- * Accessor functions for some DS and BTS fields using the above
- * global ptrace_bts_cfg.
+ * We either support (system-wide) per-cpu or per-thread allocation.
+ * We distinguish the two based on the task_struct pointer, where a
+ * NULL pointer indicates per-cpu allocation for the current cpu.
+ *
+ * Allocations are use-counted. As soon as resources are allocated,
+ * further allocations must be of the same type (per-cpu or
+ * per-thread). We model this by counting allocations (i.e. the number
+ * of tracers of a certain type) for one type negatively:
+ * =0 no tracers
+ * >0 number of per-thread tracers
+ * <0 number of per-cpu tracers
+ *
+ * The below functions to get and put tracers and to check the
+ * allocation type require the ds_lock to be held by the caller.
+ *
+ * Tracers essentially gives the number of ds contexts for a certain
+ * type of allocation.
*/
-static inline unsigned long get_bts_buffer_base(char *base)
+static long tracers;
+
+static inline void get_tracer(struct task_struct *task)
{
- return *(unsigned long *)(base + ds_cfg.bts_buffer_base.offset);
+ tracers += (task ? 1 : -1);
}
-static inline void set_bts_buffer_base(char *base, unsigned long value)
+
+static inline void put_tracer(struct task_struct *task)
{
- (*(unsigned long *)(base + ds_cfg.bts_buffer_base.offset)) = value;
+ tracers -= (task ? 1 : -1);
}
-static inline unsigned long get_bts_index(char *base)
+
+static inline int check_tracer(struct task_struct *task)
{
- return *(unsigned long *)(base + ds_cfg.bts_index.offset);
+ return (task ? (tracers >= 0) : (tracers <= 0));
}
-static inline void set_bts_index(char *base, unsigned long value)
+
+
+/*
+ * The DS context is either attached to a thread or to a cpu:
+ * - in the former case, the thread_struct contains a pointer to the
+ * attached context.
+ * - in the latter case, we use a static array of per-cpu context
+ * pointers.
+ *
+ * Contexts are use-counted. They are allocated on first access and
+ * deallocated when the last user puts the context.
+ *
+ * We distinguish between an allocating and a non-allocating get of a
+ * context:
+ * - the allocating get is used for requesting BTS/PEBS resources. It
+ * requires the caller to hold the global ds_lock.
+ * - the non-allocating get is used for all other cases. A
+ * non-existing context indicates an error. It acquires and releases
+ * the ds_lock itself for obtaining the context.
+ *
+ * A context and its DS configuration are allocated and deallocated
+ * together. A context always has a DS configuration of the
+ * appropriate size.
+ */
+static DEFINE_PER_CPU(struct ds_context *, system_context);
+
+#define this_system_context per_cpu(system_context, smp_processor_id())
+
+/*
+ * Returns the pointer to the parameter task's context or to the
+ * system-wide context, if task is NULL.
+ *
+ * Increases the use count of the returned context, if not NULL.
+ */
+static inline struct ds_context *ds_get_context(struct task_struct *task)
{
- (*(unsigned long *)(base + ds_cfg.bts_index.offset)) = value;
+ struct ds_context *context;
+
+ spin_lock(&ds_lock);
+
+ context = (task ? task->thread.ds_ctx : this_system_context);
+ if (context)
+ context->count++;
+
+ spin_unlock(&ds_lock);
+
+ return context;
}
-static inline unsigned long get_bts_absolute_maximum(char *base)
+
+/*
+ * Same as ds_get_context, but allocates the context and it's DS
+ * structure, if necessary; returns NULL; if out of memory.
+ *
+ * pre: requires ds_lock to be held
+ */
+static inline struct ds_context *ds_alloc_context(struct task_struct *task)
{
- return *(unsigned long *)(base + ds_cfg.bts_absolute_maximum.offset);
+ struct ds_context **p_context =
+ (task ? &task->thread.ds_ctx : &this_system_context);
+ struct ds_context *context = *p_context;
+
+ if (!context) {
+ context = kzalloc(sizeof(*context), GFP_KERNEL);
+
+ if (!context)
+ return NULL;
+
+ context->ds = kzalloc(ds_cfg.sizeof_ds, GFP_KERNEL);
+ if (!context->ds) {
+ kfree(context);
+ return NULL;
+ }
+
+ *p_context = context;
+
+ context->this = p_context;
+ context->task = task;
+
+ if (task)
+ set_tsk_thread_flag(task, TIF_DS_AREA_MSR);
+
+ if (!task || (task == current))
+ wrmsr(MSR_IA32_DS_AREA, (unsigned long)context->ds, 0);
+
+ get_tracer(task);
+ }
+
+ context->count++;
+
+ return context;
}
-static inline void set_bts_absolute_maximum(char *base, unsigned long value)
+
+/*
+ * Decreases the use count of the parameter context, if not NULL.
+ * Deallocates the context, if the use count reaches zero.
+ */
+static inline void ds_put_context(struct ds_context *context)
{
- (*(unsigned long *)(base + ds_cfg.bts_absolute_maximum.offset)) = value;
+ if (!context)
+ return;
+
+ spin_lock(&ds_lock);
+
+ if (--context->count)
+ goto out;
+
+ *(context->this) = NULL;
+
+ if (context->task)
+ clear_tsk_thread_flag(context->task, TIF_DS_AREA_MSR);
+
+ if (!context->task || (context->task == current))
+ wrmsrl(MSR_IA32_DS_AREA, 0);
+
+ put_tracer(context->task);
+
+ /* free any leftover buffers from tracers that did not
+ * deallocate them properly. */
+ kfree(context->buffer[ds_bts]);
+ kfree(context->buffer[ds_pebs]);
+ kfree(context->ds);
+ kfree(context);
+ out:
+ spin_unlock(&ds_lock);
}
-static inline unsigned long get_bts_interrupt_threshold(char *base)
+
+
+/*
+ * Handle a buffer overflow
+ *
+ * task: the task whose buffers are overflowing;
+ * NULL for a buffer overflow on the current cpu
+ * context: the ds context
+ * qual: the buffer type
+ */
+static void ds_overflow(struct task_struct *task, struct ds_context *context,
+ enum ds_qualifier qual)
{
- return *(unsigned long *)(base + ds_cfg.bts_interrupt_threshold.offset);
+ if (!context)
+ return;
+
+ if (context->callback[qual])
+ (*context->callback[qual])(task);
+
+ /* todo: do some more overflow handling */
}
-static inline void set_bts_interrupt_threshold(char *base, unsigned long value)
+
+
+/*
+ * Allocate a non-pageable buffer of the parameter size.
+ * Checks the memory and the locked memory rlimit.
+ *
+ * Returns the buffer, if successful;
+ * NULL, if out of memory or rlimit exceeded.
+ *
+ * size: the requested buffer size in bytes
+ * pages (out): if not NULL, contains the number of pages reserved
+ */
+static inline void *ds_allocate_buffer(size_t size, unsigned int *pages)
{
- (*(unsigned long *)(base + ds_cfg.bts_interrupt_threshold.offset)) = value;
+ unsigned long rlim, vm, pgsz;
+ void *buffer;
+
+ pgsz = PAGE_ALIGN(size) >> PAGE_SHIFT;
+
+ rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT;
+ vm = current->mm->total_vm + pgsz;
+ if (rlim < vm)
+ return NULL;
+
+ rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT;
+ vm = current->mm->locked_vm + pgsz;
+ if (rlim < vm)
+ return NULL;
+
+ buffer = kzalloc(size, GFP_KERNEL);
+ if (!buffer)
+ return NULL;
+
+ current->mm->total_vm += pgsz;
+ current->mm->locked_vm += pgsz;
+
+ if (pages)
+ *pages = pgsz;
+
+ return buffer;
}
-static inline unsigned long get_from_ip(char *base)
+
+static int ds_request(struct task_struct *task, void *base, size_t size,
+ ds_ovfl_callback_t ovfl, enum ds_qualifier qual)
{
- return *(unsigned long *)(base + ds_cfg.from_ip.offset);
+ struct ds_context *context;
+ unsigned long buffer, adj;
+ const unsigned long alignment = (1 << 3);
+ int error = 0;
+
+ if (!ds_cfg.sizeof_ds)
+ return -EOPNOTSUPP;
+
+ /* we require some space to do alignment adjustments below */
+ if (size < (alignment + ds_cfg.sizeof_rec[qual]))
+ return -EINVAL;
+
+ /* buffer overflow notification is not yet implemented */
+ if (ovfl)
+ return -EOPNOTSUPP;
+
+
+ spin_lock(&ds_lock);
+
+ if (!check_tracer(task))
+ return -EPERM;
+
+ error = -ENOMEM;
+ context = ds_alloc_context(task);
+ if (!context)
+ goto out_unlock;
+
+ error = -EALREADY;
+ if (context->owner[qual] == current)
+ goto out_unlock;
+ error = -EPERM;
+ if (context->owner[qual] != NULL)
+ goto out_unlock;
+ context->owner[qual] = current;
+
+ spin_unlock(&ds_lock);
+
+
+ error = -ENOMEM;
+ if (!base) {
+ base = ds_allocate_buffer(size, &context->pages[qual]);
+ if (!base)
+ goto out_release;
+
+ context->buffer[qual] = base;
+ }
+ error = 0;
+
+ context->callback[qual] = ovfl;
+
+ /* adjust the buffer address and size to meet alignment
+ * constraints:
+ * - buffer is double-word aligned
+ * - size is multiple of record size
+ *
+ * We checked the size at the very beginning; we have enough
+ * space to do the adjustment.
+ */
+ buffer = (unsigned long)base;
+
+ adj = ALIGN(buffer, alignment) - buffer;
+ buffer += adj;
+ size -= adj;
+
+ size /= ds_cfg.sizeof_rec[qual];
+ size *= ds_cfg.sizeof_rec[qual];
+
+ ds_set(context->ds, qual, ds_buffer_base, buffer);
+ ds_set(context->ds, qual, ds_index, buffer);
+ ds_set(context->ds, qual, ds_absolute_maximum, buffer + size);
+
+ if (ovfl) {
+ /* todo: select a suitable interrupt threshold */
+ } else
+ ds_set(context->ds, qual,
+ ds_interrupt_threshold, buffer + size + 1);
+
+ /* we keep the context until ds_release */
+ return error;
+
+ out_release:
+ context->owner[qual] = NULL;
+ ds_put_context(context);
+ return error;
+
+ out_unlock:
+ spin_unlock(&ds_lock);
+ ds_put_context(context);
+ return error;
}
-static inline void set_from_ip(char *base, unsigned long value)
+
+int ds_request_bts(struct task_struct *task, void *base, size_t size,
+ ds_ovfl_callback_t ovfl)
{
- (*(unsigned long *)(base + ds_cfg.from_ip.offset)) = value;
+ return ds_request(task, base, size, ovfl, ds_bts);
}
-static inline unsigned long get_to_ip(char *base)
+
+int ds_request_pebs(struct task_struct *task, void *base, size_t size,
+ ds_ovfl_callback_t ovfl)
{
- return *(unsigned long *)(base + ds_cfg.to_ip.offset);
+ return ds_request(task, base, size, ovfl, ds_pebs);
}
-static inline void set_to_ip(char *base, unsigned long value)
+
+static int ds_release(struct task_struct *task, enum ds_qualifier qual)
{
- (*(unsigned long *)(base + ds_cfg.to_ip.offset)) = value;
+ struct ds_context *context;
+ int error;
+
+ context = ds_get_context(task);
+ error = ds_validate_access(context, qual);
+ if (error < 0)
+ goto out;
+
+ kfree(context->buffer[qual]);
+ context->buffer[qual] = NULL;
+
+ current->mm->total_vm -= context->pages[qual];
+ current->mm->locked_vm -= context->pages[qual];
+ context->pages[qual] = 0;
+ context->owner[qual] = NULL;
+
+ /*
+ * we put the context twice:
+ * once for the ds_get_context
+ * once for the corresponding ds_request
+ */
+ ds_put_context(context);
+ out:
+ ds_put_context(context);
+ return error;
}
-static inline unsigned char get_info_type(char *base)
+
+int ds_release_bts(struct task_struct *task)
{
- return *(unsigned char *)(base + ds_cfg.info_type.offset);
+ return ds_release(task, ds_bts);
}
-static inline void set_info_type(char *base, unsigned char value)
+
+int ds_release_pebs(struct task_struct *task)
{
- (*(unsigned char *)(base + ds_cfg.info_type.offset)) = value;
+ return ds_release(task, ds_pebs);
}
-static inline unsigned long get_info_data(char *base)
+
+static int ds_get_index(struct task_struct *task, size_t *pos,
+ enum ds_qualifier qual)
{
- return *(unsigned long *)(base + ds_cfg.info_data.offset);
+ struct ds_context *context;
+ unsigned long base, index;
+ int error;
+
+ context = ds_get_context(task);
+ error = ds_validate_access(context, qual);
+ if (error < 0)
+ goto out;
+
+ base = ds_get(context->ds, qual, ds_buffer_base);
+ index = ds_get(context->ds, qual, ds_index);
+
+ error = ((index - base) / ds_cfg.sizeof_rec[qual]);
+ if (pos)
+ *pos = error;
+ out:
+ ds_put_context(context);
+ return error;
}
-static inline void set_info_data(char *base, unsigned long value)
+
+int ds_get_bts_index(struct task_struct *task, size_t *pos)
{
- (*(unsigned long *)(base + ds_cfg.info_data.offset)) = value;
+ return ds_get_index(task, pos, ds_bts);
}
+int ds_get_pebs_index(struct task_struct *task, size_t *pos)
+{
+ return ds_get_index(task, pos, ds_pebs);
+}
-int ds_allocate(void **dsp, size_t bts_size_in_bytes)
+static int ds_get_end(struct task_struct *task, size_t *pos,
+ enum ds_qualifier qual)
{
- size_t bts_size_in_records;
- unsigned long bts;
- void *ds;
+ struct ds_context *context;
+ unsigned long base, end;
+ int error;
+
+ context = ds_get_context(task);
+ error = ds_validate_access(context, qual);
+ if (error < 0)
+ goto out;
+
+ base = ds_get(context->ds, qual, ds_buffer_base);
+ end = ds_get(context->ds, qual, ds_absolute_maximum);
+
+ error = ((end - base) / ds_cfg.sizeof_rec[qual]);
+ if (pos)
+ *pos = error;
+ out:
+ ds_put_context(context);
+ return error;
+}
- if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts)
- return -EOPNOTSUPP;
+int ds_get_bts_end(struct task_struct *task, size_t *pos)
+{
+ return ds_get_end(task, pos, ds_bts);
+}
- if (bts_size_in_bytes < 0)
- return -EINVAL;
+int ds_get_pebs_end(struct task_struct *task, size_t *pos)
+{
+ return ds_get_end(task, pos, ds_pebs);
+}
- bts_size_in_records =
- bts_size_in_bytes / ds_cfg.sizeof_bts;
- bts_size_in_bytes =
- bts_size_in_records * ds_cfg.sizeof_bts;
+static int ds_access(struct task_struct *task, size_t index,
+ const void **record, enum ds_qualifier qual)
+{
+ struct ds_context *context;
+ unsigned long base, idx;
+ int error;
- if (bts_size_in_bytes <= 0)
+ if (!record)
return -EINVAL;
- bts = (unsigned long)kzalloc(bts_size_in_bytes, GFP_KERNEL);
-
- if (!bts)
- return -ENOMEM;
+ context = ds_get_context(task);
+ error = ds_validate_access(context, qual);
+ if (error < 0)
+ goto out;
- ds = kzalloc(ds_cfg.sizeof_ds, GFP_KERNEL);
+ base = ds_get(context->ds, qual, ds_buffer_base);
+ idx = base + (index * ds_cfg.sizeof_rec[qual]);
- if (!ds) {
- kfree((void *)bts);
- return -ENOMEM;
- }
-
- set_bts_buffer_base(ds, bts);
- set_bts_index(ds, bts);
- set_bts_absolute_maximum(ds, bts + bts_size_in_bytes);
- set_bts_interrupt_threshold(ds, bts + bts_size_in_bytes + 1);
+ error = -EINVAL;
+ if (idx > ds_get(context->ds, qual, ds_absolute_maximum))
+ goto out;
- *dsp = ds;
- return 0;
+ *record = (const void *)idx;
+ error = ds_cfg.sizeof_rec[qual];
+ out:
+ ds_put_context(context);
+ return error;
}
-int ds_free(void **dsp)
+int ds_access_bts(struct task_struct *task, size_t index, const void **record)
{
- if (*dsp) {
- kfree((void *)get_bts_buffer_base(*dsp));
- kfree(*dsp);
- *dsp = NULL;
- }
- return 0;
+ return ds_access(task, index, record, ds_bts);
}
-int ds_get_bts_size(void *ds)
+int ds_access_pebs(struct task_struct *task, size_t index, const void **record)
{
- int size_in_bytes;
-
- if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts)
- return -EOPNOTSUPP;
-
- if (!ds)
- return 0;
-
- size_in_bytes =
- get_bts_absolute_maximum(ds) -
- get_bts_buffer_base(ds);
- return size_in_bytes;
+ return ds_access(task, index, record, ds_pebs);
}
-int ds_get_bts_end(void *ds)
+static int ds_write(struct task_struct *task, const void *record, size_t size,
+ enum ds_qualifier qual, int force)
{
- int size_in_bytes = ds_get_bts_size(ds);
-
- if (size_in_bytes <= 0)
- return size_in_bytes;
+ struct ds_context *context;
+ int error;
- return size_in_bytes / ds_cfg.sizeof_bts;
-}
+ if (!record)
+ return -EINVAL;
-int ds_get_bts_index(void *ds)
-{
- int index_offset_in_bytes;
+ error = -EPERM;
+ context = ds_get_context(task);
+ if (!context)
+ goto out;
- if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts)
- return -EOPNOTSUPP;
+ if (!force) {
+ error = ds_validate_access(context, qual);
+ if (error < 0)
+ goto out;
+ }
- index_offset_in_bytes =
- get_bts_index(ds) -
- get_bts_buffer_base(ds);
+ error = 0;
+ while (size) {
+ unsigned long base, index, end, write_end, int_th;
+ unsigned long write_size, adj_write_size;
+
+ /*
+ * write as much as possible without producing an
+ * overflow interrupt.
+ *
+ * interrupt_threshold must either be
+ * - bigger than absolute_maximum or
+ * - point to a record between buffer_base and absolute_maximum
+ *
+ * index points to a valid record.
+ */
+ base = ds_get(context->ds, qual, ds_buffer_base);
+ index = ds_get(context->ds, qual, ds_index);
+ end = ds_get(context->ds, qual, ds_absolute_maximum);
+ int_th = ds_get(context->ds, qual, ds_interrupt_threshold);
+
+ write_end = min(end, int_th);
+
+ /* if we are already beyond the interrupt threshold,
+ * we fill the entire buffer */
+ if (write_end <= index)
+ write_end = end;
+
+ if (write_end <= index)
+ goto out;
+
+ write_size = min((unsigned long) size, write_end - index);
+ memcpy((void *)index, record, write_size);
+
+ record = (const char *)record + write_size;
+ size -= write_size;
+ error += write_size;
+
+ adj_write_size = write_size / ds_cfg.sizeof_rec[qual];
+ adj_write_size *= ds_cfg.sizeof_rec[qual];
+
+ /* zero out trailing bytes */
+ memset((char *)index + write_size, 0,
+ adj_write_size - write_size);
+ index += adj_write_size;
+
+ if (index >= end)
+ index = base;
+ ds_set(context->ds, qual, ds_index, index);
+
+ if (index >= int_th)
+ ds_overflow(task, context, qual);
+ }
- return index_offset_in_bytes / ds_cfg.sizeof_bts;
+ out:
+ ds_put_context(context);
+ return error;
}
-int ds_set_overflow(void *ds, int method)
+int ds_write_bts(struct task_struct *task, const void *record, size_t size)
{
- switch (method) {
- case DS_O_SIGNAL:
- return -EOPNOTSUPP;
- case DS_O_WRAP:
- return 0;
- default:
- return -EINVAL;
- }
+ return ds_write(task, record, size, ds_bts, /* force = */ 0);
}
-int ds_get_overflow(void *ds)
+int ds_write_pebs(struct task_struct *task, const void *record, size_t size)
{
- return DS_O_WRAP;
+ return ds_write(task, record, size, ds_pebs, /* force = */ 0);
}
-int ds_clear(void *ds)
+int ds_unchecked_write_bts(struct task_struct *task,
+ const void *record, size_t size)
{
- int bts_size = ds_get_bts_size(ds);
- unsigned long bts_base;
-
- if (bts_size <= 0)
- return bts_size;
-
- bts_base = get_bts_buffer_base(ds);
- memset((void *)bts_base, 0, bts_size);
-
- set_bts_index(ds, bts_base);
- return 0;
+ return ds_write(task, record, size, ds_bts, /* force = */ 1);
}
-int ds_read_bts(void *ds, int index, struct bts_struct *out)
+int ds_unchecked_write_pebs(struct task_struct *task,
+ const void *record, size_t size)
{
- void *bts;
+ return ds_write(task, record, size, ds_pebs, /* force = */ 1);
+}
- if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts)
- return -EOPNOTSUPP;
+static int ds_reset_or_clear(struct task_struct *task,
+ enum ds_qualifier qual, int clear)
+{
+ struct ds_context *context;
+ unsigned long base, end;
+ int error;
- if (index < 0)
- return -EINVAL;
+ context = ds_get_context(task);
+ error = ds_validate_access(context, qual);
+ if (error < 0)
+ goto out;
- if (index >= ds_get_bts_size(ds))
- return -EINVAL;
+ base = ds_get(context->ds, qual, ds_buffer_base);
+ end = ds_get(context->ds, qual, ds_absolute_maximum);
- bts = (void *)(get_bts_buffer_base(ds) + (index * ds_cfg.sizeof_bts));
+ if (clear)
+ memset((void *)base, 0, end - base);
- memset(out, 0, sizeof(*out));
- if (get_from_ip(bts) == BTS_ESCAPE_ADDRESS) {
- out->qualifier = get_info_type(bts);
- out->variant.jiffies = get_info_data(bts);
- } else {
- out->qualifier = BTS_BRANCH;
- out->variant.lbr.from_ip = get_from_ip(bts);
- out->variant.lbr.to_ip = get_to_ip(bts);
- }
+ ds_set(context->ds, qual, ds_index, base);
- return sizeof(*out);;
+ error = 0;
+ out:
+ ds_put_context(context);
+ return error;
}
-int ds_write_bts(void *ds, const struct bts_struct *in)
+int ds_reset_bts(struct task_struct *task)
{
- unsigned long bts;
-
- if (!ds_cfg.sizeof_ds || !ds_cfg.sizeof_bts)
- return -EOPNOTSUPP;
-
- if (ds_get_bts_size(ds) <= 0)
- return -ENXIO;
+ return ds_reset_or_clear(task, ds_bts, /* clear = */ 0);
+}
- bts = get_bts_index(ds);
+int ds_reset_pebs(struct task_struct *task)
+{
+ return ds_reset_or_clear(task, ds_pebs, /* clear = */ 0);
+}
- memset((void *)bts, 0, ds_cfg.sizeof_bts);
- switch (in->qualifier) {
- case BTS_INVALID:
- break;
+int ds_clear_bts(struct task_struct *task)
+{
+ return ds_reset_or_clear(task, ds_bts, /* clear = */ 1);
+}
- case BTS_BRANCH:
- set_from_ip((void *)bts, in->variant.lbr.from_ip);
- set_to_ip((void *)bts, in->variant.lbr.to_ip);
- break;
+int ds_clear_pebs(struct task_struct *task)
+{
+ return ds_reset_or_clear(task, ds_pebs, /* clear = */ 1);
+}
- case BTS_TASK_ARRIVES:
- case BTS_TASK_DEPARTS:
- set_from_ip((void *)bts, BTS_ESCAPE_ADDRESS);
- set_info_type((void *)bts, in->qualifier);
- set_info_data((void *)bts, in->variant.jiffies);
- break;
+int ds_get_pebs_reset(struct task_struct *task, u64 *value)
+{
+ struct ds_context *context;
+ int error;
- default:
+ if (!value)
return -EINVAL;
- }
- bts = bts + ds_cfg.sizeof_bts;
- if (bts >= get_bts_absolute_maximum(ds))
- bts = get_bts_buffer_base(ds);
- set_bts_index(ds, bts);
+ context = ds_get_context(task);
+ error = ds_validate_access(context, ds_pebs);
+ if (error < 0)
+ goto out;
- return ds_cfg.sizeof_bts;
+ *value = *(u64 *)(context->ds + (ds_cfg.sizeof_field * 8));
+
+ error = 0;
+ out:
+ ds_put_context(context);
+ return error;
}
-unsigned long ds_debugctl_mask(void)
+int ds_set_pebs_reset(struct task_struct *task, u64 value)
{
- return ds_cfg.debugctl_mask;
-}
+ struct ds_context *context;
+ int error;
-#ifdef __i386__
-static const struct ds_configuration ds_cfg_netburst = {
- .sizeof_ds = 9 * 4,
- .bts_buffer_base = { 0, 4 },
- .bts_index = { 4, 4 },
- .bts_absolute_maximum = { 8, 4 },
- .bts_interrupt_threshold = { 12, 4 },
- .sizeof_bts = 3 * 4,
- .from_ip = { 0, 4 },
- .to_ip = { 4, 4 },
- .info_type = { 4, 1 },
- .info_data = { 8, 4 },
- .debugctl_mask = (1<<2)|(1<<3)
-};
+ context = ds_get_context(task);
+ error = ds_validate_access(context, ds_pebs);
+ if (error < 0)
+ goto out;
-static const struct ds_configuration ds_cfg_pentium_m = {
- .sizeof_ds = 9 * 4,
- .bts_buffer_base = { 0, 4 },
- .bts_index = { 4, 4 },
- .bts_absolute_maximum = { 8, 4 },
- .bts_interrupt_threshold = { 12, 4 },
- .sizeof_bts = 3 * 4,
- .from_ip = { 0, 4 },
- .to_ip = { 4, 4 },
- .info_type = { 4, 1 },
- .info_data = { 8, 4 },
- .debugctl_mask = (1<<6)|(1<<7)
+ *(u64 *)(context->ds + (ds_cfg.sizeof_field * 8)) = value;
+
+ error = 0;
+ out:
+ ds_put_context(context);
+ return error;
+}
+
+static const struct ds_configuration ds_cfg_var = {
+ .sizeof_ds = sizeof(long) * 12,
+ .sizeof_field = sizeof(long),
+ .sizeof_rec[ds_bts] = sizeof(long) * 3,
+ .sizeof_rec[ds_pebs] = sizeof(long) * 10
};
-#endif /* _i386_ */
-
-static const struct ds_configuration ds_cfg_core2 = {
- .sizeof_ds = 9 * 8,
- .bts_buffer_base = { 0, 8 },
- .bts_index = { 8, 8 },
- .bts_absolute_maximum = { 16, 8 },
- .bts_interrupt_threshold = { 24, 8 },
- .sizeof_bts = 3 * 8,
- .from_ip = { 0, 8 },
- .to_ip = { 8, 8 },
- .info_type = { 8, 1 },
- .info_data = { 16, 8 },
- .debugctl_mask = (1<<6)|(1<<7)|(1<<9)
+static const struct ds_configuration ds_cfg_64 = {
+ .sizeof_ds = 8 * 12,
+ .sizeof_field = 8,
+ .sizeof_rec[ds_bts] = 8 * 3,
+ .sizeof_rec[ds_pebs] = 8 * 10
};
static inline void
switch (c->x86) {
case 0x6:
switch (c->x86_model) {
-#ifdef __i386__
case 0xD:
case 0xE: /* Pentium M */
- ds_configure(&ds_cfg_pentium_m);
+ ds_configure(&ds_cfg_var);
break;
-#endif /* _i386_ */
case 0xF: /* Core2 */
- ds_configure(&ds_cfg_core2);
+ case 0x1C: /* Atom */
+ ds_configure(&ds_cfg_64);
break;
default:
/* sorry, don't know about them */
break;
case 0xF:
switch (c->x86_model) {
-#ifdef __i386__
case 0x0:
case 0x1:
case 0x2: /* Netburst */
- ds_configure(&ds_cfg_netburst);
+ ds_configure(&ds_cfg_var);
break;
-#endif /* _i386_ */
default:
/* sorry, don't know about them */
break;
break;
}
}
+
+void ds_free(struct ds_context *context)
+{
+ /* This is called when the task owning the parameter context
+ * is dying. There should not be any user of that context left
+ * to disturb us, anymore. */
+ unsigned long leftovers = context->count;
+ while (leftovers--)
+ ds_put_context(context);
+}
+#endif /* CONFIG_X86_DS */
if (!p)
return -EINVAL;
- if (!strcmp(p, "exactmap")) {
+ if (!strncmp(p, "exactmap", 8)) {
#ifdef CONFIG_CRASH_DUMP
/*
* If we are doing a crash dump, we still need to know
if (memmap.map == NULL)
printk(KERN_ERR "Could not map the EFI memory map!\n");
memmap.map_end = memmap.map + (memmap.nr_map * memmap.desc_size);
+
if (memmap.desc_size != sizeof(efi_memory_desc_t))
- printk(KERN_WARNING "Kernel-defined memdesc"
- "doesn't match the one from EFI!\n");
+ printk(KERN_WARNING
+ "Kernel-defined memdesc doesn't match the one from EFI!\n");
+
if (add_efi_memmap)
do_add_efi_memmap();
ENTRY(ret_from_fork)
CFI_DEFAULT_STACK
push kernel_eflags(%rip)
- CFI_ADJUST_CFA_OFFSET 4
+ CFI_ADJUST_CFA_OFFSET 8
popf # reset kernel eflags
- CFI_ADJUST_CFA_OFFSET -4
+ CFI_ADJUST_CFA_OFFSET -8
call schedule_tail
GET_THREAD_INFO(%rcx)
testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
}
load_idt((const struct desc_ptr *)&idt_descr);
- early_printk("Kernel alive\n");
+ if (console_loglevel == 10)
+ early_printk("Kernel alive\n");
x86_64_init_pda();
- early_printk("Kernel really alive\n");
-
x86_64_start_reservations(real_mode_data);
}
/* Calculate the min / max delta */
hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
&hpet_clockevent);
- hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30,
- &hpet_clockevent);
+ /* 5 usec minimum reprogramming delta. */
+ hpet_clockevent.min_delta_ns = 5000;
/*
* Start hpet with the boot cpu mask and make it
}
static int hpet_legacy_next_event(unsigned long delta,
- struct clock_event_device *evt)
+ struct clock_event_device *evt)
{
- unsigned long cnt;
+ u32 cnt;
cnt = hpet_readl(HPET_COUNTER);
- cnt += delta;
+ cnt += (u32) delta;
hpet_writel(cnt, HPET_T0_CMP);
- return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0) ? -ETIME : 0;
+ /*
+ * We need to read back the CMP register to make sure that
+ * what we wrote hit the chip before we compare it to the
+ * counter.
+ */
+ WARN_ON((u32)hpet_readl(HPET_T0_CMP) != cnt);
+
+ return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
}
/*
DMI_MATCH(DMI_BOARD_NAME, "30BF")
}
},
+ {
+ .callback = dmi_io_delay_0xed_port,
+ .ident = "Presario F700",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
+ DMI_MATCH(DMI_BOARD_NAME, "30D3")
+ }
+ },
{ }
};
#include <linux/slab.h>
#include <linux/thread_info.h>
#include <linux/syscalls.h>
+#include <asm/syscalls.h>
/* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */
static void set_bitmap(unsigned long *bitmap, unsigned int base,
#ifdef CONFIG_X86_32
#include <mach_apic.h>
+#include <mach_ipi.h>
+
/*
* the following functions deal with sending IPIs between CPUs.
*
}
/* must come after the send_IPI functions above for inlining */
-#include <mach_ipi.h>
static int convert_apicid_to_cpu(int apic_id)
{
int i;
for_each_online_cpu(j)
seq_printf(p, "%10u ",
per_cpu(irq_stat,j).irq_call_count);
- seq_printf(p, " function call interrupts\n");
+ seq_printf(p, " Function call interrupts\n");
seq_printf(p, "TLB: ");
for_each_online_cpu(j)
seq_printf(p, "%10u ",
seq_printf(p, "CAL: ");
for_each_online_cpu(j)
seq_printf(p, "%10u ", cpu_pda(j)->irq_call_count);
- seq_printf(p, " function call interrupts\n");
+ seq_printf(p, " Function call interrupts\n");
seq_printf(p, "TLB: ");
for_each_online_cpu(j)
seq_printf(p, "%10u ", cpu_pda(j)->irq_tlb_count);
if (PageHighMem(pg)) {
data = ioremap_cache(pa_data, sizeof(*data));
if (!data) {
+ kfree(node);
error = -ENXIO;
goto err_dir;
}
*/
void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
{
+#ifndef CONFIG_X86_32
+ u32 *gdb_regs32 = (u32 *)gdb_regs;
+#endif
gdb_regs[GDB_AX] = regs->ax;
gdb_regs[GDB_BX] = regs->bx;
gdb_regs[GDB_CX] = regs->cx;
gdb_regs[GDB_SI] = regs->si;
gdb_regs[GDB_DI] = regs->di;
gdb_regs[GDB_BP] = regs->bp;
- gdb_regs[GDB_PS] = regs->flags;
gdb_regs[GDB_PC] = regs->ip;
#ifdef CONFIG_X86_32
+ gdb_regs[GDB_PS] = regs->flags;
gdb_regs[GDB_DS] = regs->ds;
gdb_regs[GDB_ES] = regs->es;
gdb_regs[GDB_CS] = regs->cs;
gdb_regs[GDB_R13] = regs->r13;
gdb_regs[GDB_R14] = regs->r14;
gdb_regs[GDB_R15] = regs->r15;
+ gdb_regs32[GDB_PS] = regs->flags;
+ gdb_regs32[GDB_CS] = regs->cs;
+ gdb_regs32[GDB_SS] = regs->ss;
#endif
gdb_regs[GDB_SP] = regs->sp;
}
*/
void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
{
+#ifndef CONFIG_X86_32
+ u32 *gdb_regs32 = (u32 *)gdb_regs;
+#endif
gdb_regs[GDB_AX] = 0;
gdb_regs[GDB_BX] = 0;
gdb_regs[GDB_CX] = 0;
gdb_regs[GDB_FS] = 0xFFFF;
gdb_regs[GDB_GS] = 0xFFFF;
#else
- gdb_regs[GDB_PS] = *(unsigned long *)(p->thread.sp + 8);
- gdb_regs[GDB_PC] = 0;
+ gdb_regs32[GDB_PS] = *(unsigned long *)(p->thread.sp + 8);
+ gdb_regs32[GDB_CS] = __KERNEL_CS;
+ gdb_regs32[GDB_SS] = __KERNEL_DS;
+ gdb_regs[GDB_PC] = p->thread.ip;
gdb_regs[GDB_R8] = 0;
gdb_regs[GDB_R9] = 0;
gdb_regs[GDB_R10] = 0;
*/
void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
{
+#ifndef CONFIG_X86_32
+ u32 *gdb_regs32 = (u32 *)gdb_regs;
+#endif
regs->ax = gdb_regs[GDB_AX];
regs->bx = gdb_regs[GDB_BX];
regs->cx = gdb_regs[GDB_CX];
regs->si = gdb_regs[GDB_SI];
regs->di = gdb_regs[GDB_DI];
regs->bp = gdb_regs[GDB_BP];
- regs->flags = gdb_regs[GDB_PS];
regs->ip = gdb_regs[GDB_PC];
#ifdef CONFIG_X86_32
+ regs->flags = gdb_regs[GDB_PS];
regs->ds = gdb_regs[GDB_DS];
regs->es = gdb_regs[GDB_ES];
regs->cs = gdb_regs[GDB_CS];
regs->r13 = gdb_regs[GDB_R13];
regs->r14 = gdb_regs[GDB_R14];
regs->r15 = gdb_regs[GDB_R15];
+ regs->flags = gdb_regs32[GDB_PS];
+ regs->cs = gdb_regs32[GDB_CS];
+ regs->ss = gdb_regs32[GDB_SS];
#endif
}
if (remcomInBuffer[0] == 's') {
linux_regs->flags |= X86_EFLAGS_TF;
kgdb_single_step = 1;
- if (kgdb_contthread) {
- atomic_set(&kgdb_cpu_doing_single_step,
- raw_smp_processor_id());
- }
+ atomic_set(&kgdb_cpu_doing_single_step,
+ raw_smp_processor_id());
}
get_debugreg(dr6, 6);
case DIE_DEBUG:
if (atomic_read(&kgdb_cpu_doing_single_step) ==
- raw_smp_processor_id() &&
- user_mode(regs))
- return single_step_cont(regs, args);
+ raw_smp_processor_id()) {
+ if (user_mode(regs))
+ return single_step_cont(regs, args);
+ break;
+ } else if (test_thread_flag(TIF_SINGLESTEP))
+ /* This means a user thread is single stepping
+ * a system call which should be ignored
+ */
+ return NOTIFY_DONE;
/* fall through */
default:
if (user_mode(regs))
kvm_deferred_mmu_op(&ftlb, sizeof ftlb);
}
-static void kvm_release_pt(u32 pfn)
+static void kvm_release_pt(unsigned long pfn)
{
struct kvm_mmu_op_release_pt rpt = {
.header.op = KVM_MMU_OP_RELEASE_PT,
#include <asm/ldt.h>
#include <asm/desc.h>
#include <asm/mmu_context.h>
+#include <asm/syscalls.h>
#ifdef CONFIG_SMP
static void flush_ldt(void *current_mm)
u32 data[2];
u32 reg = *ppos;
int cpu = iminor(file->f_path.dentry->d_inode);
- int err;
+ int err = 0;
+ ssize_t bytes = 0;
if (count % 8)
return -EINVAL; /* Invalid chunk size */
for (; count; count -= 8) {
err = rdmsr_safe_on_cpu(cpu, reg, &data[0], &data[1]);
- if (err)
- return -EIO;
- if (copy_to_user(tmp, &data, 8))
- return -EFAULT;
+ if (err) {
+ if (err == -EFAULT) /* Fix idiotic error code */
+ err = -EIO;
+ break;
+ }
+ if (copy_to_user(tmp, &data, 8)) {
+ err = -EFAULT;
+ break;
+ }
tmp += 2;
+ bytes += 8;
}
- return ((char __user *)tmp) - buf;
+ return bytes ? bytes : err;
}
static ssize_t msr_write(struct file *file, const char __user *buf,
u32 data[2];
u32 reg = *ppos;
int cpu = iminor(file->f_path.dentry->d_inode);
- int err;
+ int err = 0;
+ ssize_t bytes = 0;
if (count % 8)
return -EINVAL; /* Invalid chunk size */
for (; count; count -= 8) {
- if (copy_from_user(&data, tmp, 8))
- return -EFAULT;
+ if (copy_from_user(&data, tmp, 8)) {
+ err = -EFAULT;
+ break;
+ }
err = wrmsr_safe_on_cpu(cpu, reg, data[0], data[1]);
- if (err)
- return -EIO;
+ if (err) {
+ if (err == -EFAULT) /* Fix idiotic error code */
+ err = -EIO;
+ break;
+ }
tmp += 2;
+ bytes += 8;
}
- return ((char __user *)tmp) - buf;
+ return bytes ? bytes : err;
}
static int msr_open(struct inode *inode, struct file *file)
on_each_cpu(__acpi_nmi_disable, NULL, 1);
}
+/*
+ * This function is called as soon the LAPIC NMI watchdog driver has everything
+ * in place and it's ready to check if the NMIs belong to the NMI watchdog
+ */
+void cpu_nmi_set_wd_enabled(void)
+{
+ __get_cpu_var(wd_enabled) = 1;
+}
+
void setup_apic_nmi_watchdog(void *unused)
{
if (__get_cpu_var(wd_enabled))
switch (nmi_watchdog) {
case NMI_LOCAL_APIC:
- /* enable it before to avoid race with handler */
- __get_cpu_var(wd_enabled) = 1;
if (lapic_watchdog_init(nmi_hz) < 0) {
__get_cpu_var(wd_enabled) = 0;
return;
static void __init platform_detect(void)
{
size_t propsize;
- u32 rev;
+ __be32 rev;
if (ofw("getprop", 4, 1, NULL, "board-revision-int", &rev, 4,
&propsize) || propsize != 4) {
printk(KERN_ERR "ofw: getprop call failed!\n");
- rev = 0;
+ rev = cpu_to_be32(0);
}
olpc_platform_info.boardrev = be32_to_cpu(rev);
}
static void __init platform_detect(void)
{
/* stopgap until OFW support is added to the kernel */
- olpc_platform_info.boardrev = be32_to_cpu(0xc2);
+ olpc_platform_info.boardrev = 0xc2;
}
#endif
#endif
.wbinvd = native_wbinvd,
.read_msr = native_read_msr_safe,
+ .read_msr_amd = native_read_msr_amd_safe,
.write_msr = native_write_msr_safe,
.read_tsc = native_read_tsc,
.read_pmc = native_read_pmc,
start = start_##ops##_##x; \
end = end_##ops##_##x; \
goto patch_site
- switch(type) {
+ switch (type) {
PATCH_SITE(pv_irq_ops, irq_disable);
PATCH_SITE(pv_irq_ops, irq_enable);
PATCH_SITE(pv_irq_ops, restore_fl);
* using 512M as goal
*/
align = 64ULL<<20;
- size = round_up(dma32_bootmem_size, align);
+ size = roundup(dma32_bootmem_size, align);
dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align,
512ULL<<20);
if (dma32_bootmem_ptr)
static unsigned long next_bit; /* protected by iommu_bitmap_lock */
static int need_flush; /* global flush state. set for each gart wrap */
-static unsigned long alloc_iommu(struct device *dev, int size)
+static unsigned long alloc_iommu(struct device *dev, int size,
+ unsigned long align_mask)
{
unsigned long offset, flags;
unsigned long boundary_size;
base_index = ALIGN(iommu_bus_base & dma_get_seg_boundary(dev),
PAGE_SIZE) >> PAGE_SHIFT;
- boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
+ boundary_size = ALIGN((unsigned long long)dma_get_seg_boundary(dev) + 1,
PAGE_SIZE) >> PAGE_SHIFT;
spin_lock_irqsave(&iommu_bitmap_lock, flags);
offset = iommu_area_alloc(iommu_gart_bitmap, iommu_pages, next_bit,
- size, base_index, boundary_size, 0);
+ size, base_index, boundary_size, align_mask);
if (offset == -1) {
need_flush = 1;
offset = iommu_area_alloc(iommu_gart_bitmap, iommu_pages, 0,
- size, base_index, boundary_size, 0);
+ size, base_index, boundary_size,
+ align_mask);
}
if (offset != -1) {
next_bit = offset+size;
* Caller needs to check if the iommu is needed and flush.
*/
static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem,
- size_t size, int dir)
+ size_t size, int dir, unsigned long align_mask)
{
unsigned long npages = iommu_num_pages(phys_mem, size);
- unsigned long iommu_page = alloc_iommu(dev, npages);
+ unsigned long iommu_page = alloc_iommu(dev, npages, align_mask);
int i;
if (iommu_page == -1) {
static dma_addr_t
gart_map_simple(struct device *dev, phys_addr_t paddr, size_t size, int dir)
{
- dma_addr_t map = dma_map_area(dev, paddr, size, dir);
+ dma_addr_t map;
+ unsigned long align_mask;
+
+ align_mask = (1UL << get_order(size)) - 1;
+ map = dma_map_area(dev, paddr, size, dir, align_mask);
flush_gart();
if (!need_iommu(dev, paddr, size))
return paddr;
- bus = gart_map_simple(dev, paddr, size, dir);
+ bus = dma_map_area(dev, paddr, size, dir, 0);
+ flush_gart();
return bus;
}
unsigned long addr = sg_phys(s);
if (nonforced_iommu(dev, addr, s->length)) {
- addr = dma_map_area(dev, addr, s->length, dir);
+ addr = dma_map_area(dev, addr, s->length, dir, 0);
if (addr == bad_dma_address) {
if (i > 0)
gart_unmap_sg(dev, sg, i, dir);
int nelems, struct scatterlist *sout,
unsigned long pages)
{
- unsigned long iommu_start = alloc_iommu(dev, pages);
+ unsigned long iommu_start = alloc_iommu(dev, pages, 0);
unsigned long iommu_page = iommu_start;
struct scatterlist *s;
int i;
struct pci_dev *dev;
void *gatt;
int i, error;
- unsigned long start_pfn, end_pfn;
printk(KERN_INFO "PCI-DMA: Disabling AGP.\n");
aper_size = aper_base = info->aper_size = 0;
printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n",
aper_base, aper_size>>10);
- /* need to map that range */
- end_pfn = (aper_base>>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT);
- if (end_pfn > max_low_pfn_mapped) {
- start_pfn = (aper_base>>PAGE_SHIFT);
- init_memory_mapping(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
- }
return 0;
nommu:
{
struct agp_kern_info info;
unsigned long iommu_start;
- unsigned long aper_size;
+ unsigned long aper_base, aper_size;
+ unsigned long start_pfn, end_pfn;
unsigned long scratch;
long i;
return;
}
+ /* need to map that range */
+ aper_size = info.aper_size << 20;
+ aper_base = info.aper_base;
+ end_pfn = (aper_base>>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT);
+ if (end_pfn > max_low_pfn_mapped) {
+ start_pfn = (aper_base>>PAGE_SHIFT);
+ init_memory_mapping(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
+ }
+
printk(KERN_INFO "PCI-DMA: using GART IOMMU.\n");
- aper_size = info.aper_size * 1024 * 1024;
iommu_size = check_iommu_size(info.aper_base, aper_size);
iommu_pages = iommu_size >> PAGE_SHIFT;
#include <linux/platform_device.h>
-#include <linux/errno.h>
+#include <linux/err.h>
#include <linux/init.h>
static __init int add_pcspkr(void)
{
struct platform_device *pd;
- int ret;
- pd = platform_device_alloc("pcspkr", -1);
- if (!pd)
- return -ENOMEM;
+ pd = platform_device_register_simple("pcspkr", -1, NULL, 0);
- ret = platform_device_add(pd);
- if (ret)
- platform_device_put(pd);
-
- return ret;
+ return IS_ERR(pd) ? PTR_ERR(pd) : 0;
}
device_initcall(add_pcspkr);
return 1;
}
+static cpumask_t c1e_mask = CPU_MASK_NONE;
+static int c1e_detected;
+
+void c1e_remove_cpu(int cpu)
+{
+ cpu_clear(cpu, c1e_mask);
+}
+
/*
* C1E aware idle routine. We check for C1E active in the interrupt
* pending message MSR. If we detect C1E, then we handle it the same
*/
static void c1e_idle(void)
{
- static cpumask_t c1e_mask = CPU_MASK_NONE;
- static int c1e_detected;
-
if (need_resched())
return;
rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi);
if (lo & K8_INTP_C1E_ACTIVE_MASK) {
c1e_detected = 1;
- mark_tsc_unstable("TSC halt in C1E");
- printk(KERN_INFO "System has C1E enabled\n");
+ if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+ mark_tsc_unstable("TSC halt in AMD C1E");
+ printk(KERN_INFO "System has AMD C1E enabled\n");
+ set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E);
}
}
#include <linux/tick.h>
#include <linux/percpu.h>
#include <linux/prctl.h>
+#include <linux/dmi.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <asm/cpu.h>
#include <asm/kdebug.h>
+#include <asm/idle.h>
+#include <asm/syscalls.h>
+#include <asm/smp.h>
asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
cpu_clear(cpu, cpu_callin_map);
numa_remove_cpu(cpu);
+ c1e_remove_cpu(cpu);
}
/* We don't actually take CPU down, just spin without interrupts. */
unsigned long d0, d1, d2, d3, d6, d7;
unsigned long sp;
unsigned short ss, gs;
+ const char *board;
if (user_mode_vm(regs)) {
sp = regs->sp;
}
printk("\n");
- printk("Pid: %d, comm: %s %s (%s %.*s)\n",
+
+ board = dmi_get_system_info(DMI_PRODUCT_NAME);
+ if (!board)
+ board = "";
+ printk("Pid: %d, comm: %s %s (%s %.*s) %s\n",
task_pid_nr(current), current->comm,
print_tainted(), init_utsname()->release,
(int)strcspn(init_utsname()->version, " "),
- init_utsname()->version);
+ init_utsname()->version, board);
printk("EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n",
(u16)regs->cs, regs->ip, regs->flags,
tss->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET;
put_cpu();
}
+#ifdef CONFIG_X86_DS
+ /* Free any DS contexts that have not been properly released. */
+ if (unlikely(current->thread.ds_ctx)) {
+ /* we clear debugctl to make sure DS is not used. */
+ update_debugctlmsr(0);
+ ds_free(current->thread.ds_ctx);
+ }
+#endif /* CONFIG_X86_DS */
}
void flush_thread(void)
return 0;
}
+#ifdef CONFIG_X86_DS
+static int update_debugctl(struct thread_struct *prev,
+ struct thread_struct *next, unsigned long debugctl)
+{
+ unsigned long ds_prev = 0;
+ unsigned long ds_next = 0;
+
+ if (prev->ds_ctx)
+ ds_prev = (unsigned long)prev->ds_ctx->ds;
+ if (next->ds_ctx)
+ ds_next = (unsigned long)next->ds_ctx->ds;
+
+ if (ds_next != ds_prev) {
+ /* we clear debugctl to make sure DS
+ * is not in use when we change it */
+ debugctl = 0;
+ update_debugctlmsr(0);
+ wrmsr(MSR_IA32_DS_AREA, ds_next, 0);
+ }
+ return debugctl;
+}
+#else
+static int update_debugctl(struct thread_struct *prev,
+ struct thread_struct *next, unsigned long debugctl)
+{
+ return debugctl;
+}
+#endif /* CONFIG_X86_DS */
+
static noinline void
__switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
struct tss_struct *tss)
prev = &prev_p->thread;
next = &next_p->thread;
- debugctl = prev->debugctlmsr;
- if (next->ds_area_msr != prev->ds_area_msr) {
- /* we clear debugctl to make sure DS
- * is not in use when we change it */
- debugctl = 0;
- update_debugctlmsr(0);
- wrmsr(MSR_IA32_DS_AREA, next->ds_area_msr, 0);
- }
+ debugctl = update_debugctl(prev, next, prev->debugctlmsr);
if (next->debugctlmsr != debugctl)
update_debugctlmsr(next->debugctlmsr);
hard_enable_TSC();
}
-#ifdef X86_BTS
+#ifdef CONFIG_X86_PTRACE_BTS
if (test_tsk_thread_flag(prev_p, TIF_BTS_TRACE_TS))
ptrace_bts_take_timestamp(prev_p, BTS_TASK_DEPARTS);
if (test_tsk_thread_flag(next_p, TIF_BTS_TRACE_TS))
ptrace_bts_take_timestamp(next_p, BTS_TASK_ARRIVES);
-#endif
+#endif /* CONFIG_X86_PTRACE_BTS */
if (!test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) {
#include <linux/kdebug.h>
#include <linux/tick.h>
#include <linux/prctl.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
-#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/system.h>
-#include <asm/io.h>
#include <asm/processor.h>
#include <asm/i387.h>
#include <asm/mmu_context.h>
#include <asm/proto.h>
#include <asm/ia32.h>
#include <asm/idle.h>
+#include <asm/syscalls.h>
asmlinkage extern void ret_from_fork(void);
#ifdef CONFIG_HOTPLUG_CPU
DECLARE_PER_CPU(int, cpu_state);
-#include <asm/nmi.h>
+#include <linux/nmi.h>
/* We halt the CPU with physical CPU hotplug */
static inline void play_dead(void)
{
idle_task_exit();
+ c1e_remove_cpu(raw_smp_processor_id());
+
mb();
/* Ack it */
__get_cpu_var(cpu_state) = CPU_DEAD;
}
/* Prints also some state that isn't saved in the pt_regs */
-void __show_regs(struct pt_regs * regs)
+void __show_regs(struct pt_regs *regs)
{
unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L, fs, gs, shadowgs;
unsigned long d0, d1, d2, d3, d6, d7;
printk("\n");
print_modules();
- printk("Pid: %d, comm: %.20s %s %s %.*s\n",
+ printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s\n",
current->pid, current->comm, print_tainted(),
init_utsname()->release,
(int)strcspn(init_utsname()->version, " "),
init_utsname()->version);
- printk("RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip);
+ printk(KERN_INFO "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip);
printk_address(regs->ip, 1);
- printk("RSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, regs->sp,
- regs->flags);
- printk("RAX: %016lx RBX: %016lx RCX: %016lx\n",
+ printk(KERN_INFO "RSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss,
+ regs->sp, regs->flags);
+ printk(KERN_INFO "RAX: %016lx RBX: %016lx RCX: %016lx\n",
regs->ax, regs->bx, regs->cx);
- printk("RDX: %016lx RSI: %016lx RDI: %016lx\n",
+ printk(KERN_INFO "RDX: %016lx RSI: %016lx RDI: %016lx\n",
regs->dx, regs->si, regs->di);
- printk("RBP: %016lx R08: %016lx R09: %016lx\n",
+ printk(KERN_INFO "RBP: %016lx R08: %016lx R09: %016lx\n",
regs->bp, regs->r8, regs->r9);
- printk("R10: %016lx R11: %016lx R12: %016lx\n",
- regs->r10, regs->r11, regs->r12);
- printk("R13: %016lx R14: %016lx R15: %016lx\n",
- regs->r13, regs->r14, regs->r15);
-
- asm("movl %%ds,%0" : "=r" (ds));
- asm("movl %%cs,%0" : "=r" (cs));
- asm("movl %%es,%0" : "=r" (es));
+ printk(KERN_INFO "R10: %016lx R11: %016lx R12: %016lx\n",
+ regs->r10, regs->r11, regs->r12);
+ printk(KERN_INFO "R13: %016lx R14: %016lx R15: %016lx\n",
+ regs->r13, regs->r14, regs->r15);
+
+ asm("movl %%ds,%0" : "=r" (ds));
+ asm("movl %%cs,%0" : "=r" (cs));
+ asm("movl %%es,%0" : "=r" (es));
asm("movl %%fs,%0" : "=r" (fsindex));
asm("movl %%gs,%0" : "=r" (gsindex));
rdmsrl(MSR_FS_BASE, fs);
- rdmsrl(MSR_GS_BASE, gs);
- rdmsrl(MSR_KERNEL_GS_BASE, shadowgs);
+ rdmsrl(MSR_GS_BASE, gs);
+ rdmsrl(MSR_KERNEL_GS_BASE, shadowgs);
cr0 = read_cr0();
cr2 = read_cr2();
cr3 = read_cr3();
cr4 = read_cr4();
- printk("FS: %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n",
- fs,fsindex,gs,gsindex,shadowgs);
- printk("CS: %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds, es, cr0);
- printk("CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3, cr4);
+ printk(KERN_INFO "FS: %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n",
+ fs, fsindex, gs, gsindex, shadowgs);
+ printk(KERN_INFO "CS: %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds,
+ es, cr0);
+ printk(KERN_INFO "CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3,
+ cr4);
get_debugreg(d0, 0);
get_debugreg(d1, 1);
get_debugreg(d2, 2);
- printk("DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2);
+ printk(KERN_INFO "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2);
get_debugreg(d3, 3);
get_debugreg(d6, 6);
get_debugreg(d7, 7);
- printk("DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7);
+ printk(KERN_INFO "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7);
}
void show_regs(struct pt_regs *regs)
{
- printk("CPU %d:", smp_processor_id());
+ printk(KERN_INFO "CPU %d:", smp_processor_id());
__show_regs(regs);
show_trace(NULL, regs, (void *)(regs + 1), regs->bp);
}
t->io_bitmap_max = 0;
put_cpu();
}
+#ifdef CONFIG_X86_DS
+ /* Free any DS contexts that have not been properly released. */
+ if (unlikely(t->ds_ctx)) {
+ /* we clear debugctl to make sure DS is not used. */
+ update_debugctlmsr(0);
+ ds_free(t->ds_ctx);
+ }
+#endif /* CONFIG_X86_DS */
}
void flush_thread(void)
int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
unsigned long unused,
- struct task_struct * p, struct pt_regs * regs)
+ struct task_struct *p, struct pt_regs *regs)
{
int err;
- struct pt_regs * childregs;
+ struct pt_regs *childregs;
struct task_struct *me = current;
childregs = ((struct pt_regs *)
if (test_thread_flag(TIF_IA32))
err = do_set_thread_area(p, -1,
(struct user_desc __user *)childregs->si, 0);
- else
-#endif
- err = do_arch_prctl(p, ARCH_SET_FS, childregs->r8);
- if (err)
+ else
+#endif
+ err = do_arch_prctl(p, ARCH_SET_FS, childregs->r8);
+ if (err)
goto out;
}
err = 0;
next = &next_p->thread;
debugctl = prev->debugctlmsr;
- if (next->ds_area_msr != prev->ds_area_msr) {
- /* we clear debugctl to make sure DS
- * is not in use when we change it */
- debugctl = 0;
- update_debugctlmsr(0);
- wrmsrl(MSR_IA32_DS_AREA, next->ds_area_msr);
+
+#ifdef CONFIG_X86_DS
+ {
+ unsigned long ds_prev = 0, ds_next = 0;
+
+ if (prev->ds_ctx)
+ ds_prev = (unsigned long)prev->ds_ctx->ds;
+ if (next->ds_ctx)
+ ds_next = (unsigned long)next->ds_ctx->ds;
+
+ if (ds_next != ds_prev) {
+ /*
+ * We clear debugctl to make sure DS
+ * is not in use when we change it:
+ */
+ debugctl = 0;
+ update_debugctlmsr(0);
+ wrmsrl(MSR_IA32_DS_AREA, ds_next);
+ }
}
+#endif /* CONFIG_X86_DS */
if (next->debugctlmsr != debugctl)
update_debugctlmsr(next->debugctlmsr);
memset(tss->io_bitmap, 0xff, prev->io_bitmap_max);
}
-#ifdef X86_BTS
+#ifdef CONFIG_X86_PTRACE_BTS
if (test_tsk_thread_flag(prev_p, TIF_BTS_TRACE_TS))
ptrace_bts_take_timestamp(prev_p, BTS_TASK_DEPARTS);
if (test_tsk_thread_flag(next_p, TIF_BTS_TRACE_TS))
ptrace_bts_take_timestamp(next_p, BTS_TASK_ARRIVES);
-#endif
+#endif /* CONFIG_X86_PTRACE_BTS */
}
/*
unsigned fsindex, gsindex;
/* we're going to use this soon, after a few expensive things */
- if (next_p->fpu_counter>5)
+ if (next_p->fpu_counter > 5)
prefetch(next->xstate);
/*
*/
load_sp0(tss, next);
- /*
+ /*
* Switch DS and ES.
* This won't pick up thread selector changes, but I guess that is ok.
*/
savesegment(es, prev->es);
if (unlikely(next->es | prev->es))
- loadsegment(es, next->es);
+ loadsegment(es, next->es);
savesegment(ds, prev->ds);
if (unlikely(next->ds | prev->ds))
*/
arch_leave_lazy_cpu_mode();
- /*
+ /*
* Switch FS and GS.
*
* Segment register != 0 always requires a reload. Also
*/
if (unlikely(fsindex | next->fsindex | prev->fs)) {
loadsegment(fs, next->fsindex);
- /*
+ /*
* Check if the user used a selector != 0; if yes
* clear 64bit base, since overloaded base is always
* mapped to the Null selector
*/
if (fsindex)
- prev->fs = 0;
+ prev->fs = 0;
}
/* when next process has a 64bit base use it */
if (next->fs)
if (unlikely(gsindex | next->gsindex | prev->gs)) {
load_gs_index(next->gsindex);
if (gsindex)
- prev->gs = 0;
+ prev->gs = 0;
}
if (next->gs)
wrmsrl(MSR_KERNEL_GS_BASE, next->gs);
/* Must be after DS reload */
unlazy_fpu(prev_p);
- /*
+ /*
* Switch the PDA and FPU contexts.
*/
prev->usersp = read_pda(oldrsp);
write_pda(oldrsp, next->usersp);
- write_pda(pcurrent, next_p);
+ write_pda(pcurrent, next_p);
write_pda(kernelstack,
(unsigned long)task_stack_page(next_p) +
char __user * __user *envp, struct pt_regs *regs)
{
long error;
- char * filename;
+ char *filename;
filename = getname(name);
error = PTR_ERR(filename);
unsigned long get_wchan(struct task_struct *p)
{
unsigned long stack;
- u64 fp,ip;
+ u64 fp, ip;
int count = 0;
- if (!p || p == current || p->state==TASK_RUNNING)
- return 0;
+ if (!p || p == current || p->state == TASK_RUNNING)
+ return 0;
stack = (unsigned long)task_stack_page(p);
if (p->thread.sp < stack || p->thread.sp > stack+THREAD_SIZE)
return 0;
fp = *(u64 *)(p->thread.sp);
- do {
+ do {
if (fp < (unsigned long)stack ||
fp > (unsigned long)stack+THREAD_SIZE)
- return 0;
+ return 0;
ip = *(u64 *)(fp+8);
if (!in_sched_functions(ip))
return ip;
- fp = *(u64 *)fp;
- } while (count++ < 16);
+ fp = *(u64 *)fp;
+ } while (count++ < 16);
return 0;
}
long do_arch_prctl(struct task_struct *task, int code, unsigned long addr)
-{
- int ret = 0;
+{
+ int ret = 0;
int doit = task == current;
int cpu;
- switch (code) {
+ switch (code) {
case ARCH_SET_GS:
if (addr >= TASK_SIZE_OF(task))
- return -EPERM;
+ return -EPERM;
cpu = get_cpu();
- /* handle small bases via the GDT because that's faster to
+ /* handle small bases via the GDT because that's faster to
switch. */
- if (addr <= 0xffffffff) {
- set_32bit_tls(task, GS_TLS, addr);
- if (doit) {
+ if (addr <= 0xffffffff) {
+ set_32bit_tls(task, GS_TLS, addr);
+ if (doit) {
load_TLS(&task->thread, cpu);
- load_gs_index(GS_TLS_SEL);
+ load_gs_index(GS_TLS_SEL);
}
- task->thread.gsindex = GS_TLS_SEL;
+ task->thread.gsindex = GS_TLS_SEL;
task->thread.gs = 0;
- } else {
+ } else {
task->thread.gsindex = 0;
task->thread.gs = addr;
if (doit) {
load_gs_index(0);
ret = checking_wrmsrl(MSR_KERNEL_GS_BASE, addr);
- }
+ }
}
put_cpu();
break;
rdmsrl(MSR_KERNEL_GS_BASE, base);
else
base = task->thread.gs;
- }
- else
+ } else
base = task->thread.gs;
ret = put_user(base, (unsigned long __user *)addr);
break;
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/regset.h>
+#include <linux/tracehook.h>
#include <linux/user.h>
#include <linux/elf.h>
#include <linux/security.h>
#define FLAG_MASK FLAG_MASK_32
-static long *pt_regs_access(struct pt_regs *regs, unsigned long regno)
+static unsigned long *pt_regs_access(struct pt_regs *regs, unsigned long regno)
{
BUILD_BUG_ON(offsetof(struct pt_regs, bx) != 0);
regno >>= 2;
return 0;
}
-#ifdef X86_BTS
+#ifdef CONFIG_X86_PTRACE_BTS
+/*
+ * The configuration for a particular BTS hardware implementation.
+ */
+struct bts_configuration {
+ /* the size of a BTS record in bytes; at most BTS_MAX_RECORD_SIZE */
+ unsigned char sizeof_bts;
+ /* the size of a field in the BTS record in bytes */
+ unsigned char sizeof_field;
+ /* a bitmask to enable/disable BTS in DEBUGCTL MSR */
+ unsigned long debugctl_mask;
+};
+static struct bts_configuration bts_cfg;
+
+#define BTS_MAX_RECORD_SIZE (8 * 3)
+
+
+/*
+ * Branch Trace Store (BTS) uses the following format. Different
+ * architectures vary in the size of those fields.
+ * - source linear address
+ * - destination linear address
+ * - flags
+ *
+ * Later architectures use 64bit pointers throughout, whereas earlier
+ * architectures use 32bit pointers in 32bit mode.
+ *
+ * We compute the base address for the first 8 fields based on:
+ * - the field size stored in the DS configuration
+ * - the relative field position
+ *
+ * In order to store additional information in the BTS buffer, we use
+ * a special source address to indicate that the record requires
+ * special interpretation.
+ *
+ * Netburst indicated via a bit in the flags field whether the branch
+ * was predicted; this is ignored.
+ */
+
+enum bts_field {
+ bts_from = 0,
+ bts_to,
+ bts_flags,
+
+ bts_escape = (unsigned long)-1,
+ bts_qual = bts_to,
+ bts_jiffies = bts_flags
+};
+
+static inline unsigned long bts_get(const char *base, enum bts_field field)
+{
+ base += (bts_cfg.sizeof_field * field);
+ return *(unsigned long *)base;
+}
-static int ptrace_bts_get_size(struct task_struct *child)
+static inline void bts_set(char *base, enum bts_field field, unsigned long val)
{
- if (!child->thread.ds_area_msr)
- return -ENXIO;
+ base += (bts_cfg.sizeof_field * field);;
+ (*(unsigned long *)base) = val;
+}
- return ds_get_bts_index((void *)child->thread.ds_area_msr);
+/*
+ * Translate a BTS record from the raw format into the bts_struct format
+ *
+ * out (out): bts_struct interpretation
+ * raw: raw BTS record
+ */
+static void ptrace_bts_translate_record(struct bts_struct *out, const void *raw)
+{
+ memset(out, 0, sizeof(*out));
+ if (bts_get(raw, bts_from) == bts_escape) {
+ out->qualifier = bts_get(raw, bts_qual);
+ out->variant.jiffies = bts_get(raw, bts_jiffies);
+ } else {
+ out->qualifier = BTS_BRANCH;
+ out->variant.lbr.from_ip = bts_get(raw, bts_from);
+ out->variant.lbr.to_ip = bts_get(raw, bts_to);
+ }
}
-static int ptrace_bts_read_record(struct task_struct *child,
- long index,
+static int ptrace_bts_read_record(struct task_struct *child, size_t index,
struct bts_struct __user *out)
{
struct bts_struct ret;
- int retval;
- int bts_end;
- int bts_index;
-
- if (!child->thread.ds_area_msr)
- return -ENXIO;
+ const void *bts_record;
+ size_t bts_index, bts_end;
+ int error;
- if (index < 0)
- return -EINVAL;
+ error = ds_get_bts_end(child, &bts_end);
+ if (error < 0)
+ return error;
- bts_end = ds_get_bts_end((void *)child->thread.ds_area_msr);
if (bts_end <= index)
return -EINVAL;
+ error = ds_get_bts_index(child, &bts_index);
+ if (error < 0)
+ return error;
+
/* translate the ptrace bts index into the ds bts index */
- bts_index = ds_get_bts_index((void *)child->thread.ds_area_msr);
- bts_index -= (index + 1);
- if (bts_index < 0)
- bts_index += bts_end;
+ bts_index += bts_end - (index + 1);
+ if (bts_end <= bts_index)
+ bts_index -= bts_end;
- retval = ds_read_bts((void *)child->thread.ds_area_msr,
- bts_index, &ret);
- if (retval < 0)
- return retval;
+ error = ds_access_bts(child, bts_index, &bts_record);
+ if (error < 0)
+ return error;
+
+ ptrace_bts_translate_record(&ret, bts_record);
if (copy_to_user(out, &ret, sizeof(ret)))
return -EFAULT;
return sizeof(ret);
}
-static int ptrace_bts_clear(struct task_struct *child)
-{
- if (!child->thread.ds_area_msr)
- return -ENXIO;
-
- return ds_clear((void *)child->thread.ds_area_msr);
-}
-
static int ptrace_bts_drain(struct task_struct *child,
long size,
struct bts_struct __user *out)
{
- int end, i;
- void *ds = (void *)child->thread.ds_area_msr;
-
- if (!ds)
- return -ENXIO;
+ struct bts_struct ret;
+ const unsigned char *raw;
+ size_t end, i;
+ int error;
- end = ds_get_bts_index(ds);
- if (end <= 0)
- return end;
+ error = ds_get_bts_index(child, &end);
+ if (error < 0)
+ return error;
if (size < (end * sizeof(struct bts_struct)))
return -EIO;
- for (i = 0; i < end; i++, out++) {
- struct bts_struct ret;
- int retval;
+ error = ds_access_bts(child, 0, (const void **)&raw);
+ if (error < 0)
+ return error;
- retval = ds_read_bts(ds, i, &ret);
- if (retval < 0)
- return retval;
+ for (i = 0; i < end; i++, out++, raw += bts_cfg.sizeof_bts) {
+ ptrace_bts_translate_record(&ret, raw);
if (copy_to_user(out, &ret, sizeof(ret)))
return -EFAULT;
}
- ds_clear(ds);
+ error = ds_clear_bts(child);
+ if (error < 0)
+ return error;
return end;
}
+static void ptrace_bts_ovfl(struct task_struct *child)
+{
+ send_sig(child->thread.bts_ovfl_signal, child, 0);
+}
+
static int ptrace_bts_config(struct task_struct *child,
long cfg_size,
const struct ptrace_bts_config __user *ucfg)
{
struct ptrace_bts_config cfg;
- int bts_size, ret = 0;
- void *ds;
+ int error = 0;
+
+ error = -EOPNOTSUPP;
+ if (!bts_cfg.sizeof_bts)
+ goto errout;
+ error = -EIO;
if (cfg_size < sizeof(cfg))
- return -EIO;
+ goto errout;
+ error = -EFAULT;
if (copy_from_user(&cfg, ucfg, sizeof(cfg)))
- return -EFAULT;
+ goto errout;
- if ((int)cfg.size < 0)
- return -EINVAL;
+ error = -EINVAL;
+ if ((cfg.flags & PTRACE_BTS_O_SIGNAL) &&
+ !(cfg.flags & PTRACE_BTS_O_ALLOC))
+ goto errout;
- bts_size = 0;
- ds = (void *)child->thread.ds_area_msr;
- if (ds) {
- bts_size = ds_get_bts_size(ds);
- if (bts_size < 0)
- return bts_size;
- }
- cfg.size = PAGE_ALIGN(cfg.size);
+ if (cfg.flags & PTRACE_BTS_O_ALLOC) {
+ ds_ovfl_callback_t ovfl = NULL;
+ unsigned int sig = 0;
+
+ /* we ignore the error in case we were not tracing child */
+ (void)ds_release_bts(child);
- if (bts_size != cfg.size) {
- ret = ptrace_bts_realloc(child, cfg.size,
- cfg.flags & PTRACE_BTS_O_CUT_SIZE);
- if (ret < 0)
+ if (cfg.flags & PTRACE_BTS_O_SIGNAL) {
+ if (!cfg.signal)
+ goto errout;
+
+ sig = cfg.signal;
+ ovfl = ptrace_bts_ovfl;
+ }
+
+ error = ds_request_bts(child, /* base = */ NULL, cfg.size, ovfl);
+ if (error < 0)
goto errout;
- ds = (void *)child->thread.ds_area_msr;
+ child->thread.bts_ovfl_signal = sig;
}
- if (cfg.flags & PTRACE_BTS_O_SIGNAL)
- ret = ds_set_overflow(ds, DS_O_SIGNAL);
- else
- ret = ds_set_overflow(ds, DS_O_WRAP);
- if (ret < 0)
+ error = -EINVAL;
+ if (!child->thread.ds_ctx && cfg.flags)
goto errout;
if (cfg.flags & PTRACE_BTS_O_TRACE)
- child->thread.debugctlmsr |= ds_debugctl_mask();
+ child->thread.debugctlmsr |= bts_cfg.debugctl_mask;
else
- child->thread.debugctlmsr &= ~ds_debugctl_mask();
+ child->thread.debugctlmsr &= ~bts_cfg.debugctl_mask;
if (cfg.flags & PTRACE_BTS_O_SCHED)
set_tsk_thread_flag(child, TIF_BTS_TRACE_TS);
else
clear_tsk_thread_flag(child, TIF_BTS_TRACE_TS);
- ret = sizeof(cfg);
+ error = sizeof(cfg);
out:
if (child->thread.debugctlmsr)
else
clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
- return ret;
+ return error;
errout:
- child->thread.debugctlmsr &= ~ds_debugctl_mask();
+ child->thread.debugctlmsr &= ~bts_cfg.debugctl_mask;
clear_tsk_thread_flag(child, TIF_BTS_TRACE_TS);
goto out;
}
long cfg_size,
struct ptrace_bts_config __user *ucfg)
{
- void *ds = (void *)child->thread.ds_area_msr;
struct ptrace_bts_config cfg;
+ size_t end;
+ const void *base, *max;
+ int error;
if (cfg_size < sizeof(cfg))
return -EIO;
- memset(&cfg, 0, sizeof(cfg));
+ error = ds_get_bts_end(child, &end);
+ if (error < 0)
+ return error;
- if (ds) {
- cfg.size = ds_get_bts_size(ds);
+ error = ds_access_bts(child, /* index = */ 0, &base);
+ if (error < 0)
+ return error;
- if (ds_get_overflow(ds) == DS_O_SIGNAL)
- cfg.flags |= PTRACE_BTS_O_SIGNAL;
+ error = ds_access_bts(child, /* index = */ end, &max);
+ if (error < 0)
+ return error;
- if (test_tsk_thread_flag(child, TIF_DEBUGCTLMSR) &&
- child->thread.debugctlmsr & ds_debugctl_mask())
- cfg.flags |= PTRACE_BTS_O_TRACE;
+ memset(&cfg, 0, sizeof(cfg));
+ cfg.size = (max - base);
+ cfg.signal = child->thread.bts_ovfl_signal;
+ cfg.bts_size = sizeof(struct bts_struct);
- if (test_tsk_thread_flag(child, TIF_BTS_TRACE_TS))
- cfg.flags |= PTRACE_BTS_O_SCHED;
- }
+ if (cfg.signal)
+ cfg.flags |= PTRACE_BTS_O_SIGNAL;
- cfg.bts_size = sizeof(struct bts_struct);
+ if (test_tsk_thread_flag(child, TIF_DEBUGCTLMSR) &&
+ child->thread.debugctlmsr & bts_cfg.debugctl_mask)
+ cfg.flags |= PTRACE_BTS_O_TRACE;
+
+ if (test_tsk_thread_flag(child, TIF_BTS_TRACE_TS))
+ cfg.flags |= PTRACE_BTS_O_SCHED;
if (copy_to_user(ucfg, &cfg, sizeof(cfg)))
return -EFAULT;
return sizeof(cfg);
}
-
static int ptrace_bts_write_record(struct task_struct *child,
const struct bts_struct *in)
{
- int retval;
+ unsigned char bts_record[BTS_MAX_RECORD_SIZE];
- if (!child->thread.ds_area_msr)
- return -ENXIO;
+ BUG_ON(BTS_MAX_RECORD_SIZE < bts_cfg.sizeof_bts);
- retval = ds_write_bts((void *)child->thread.ds_area_msr, in);
- if (retval)
- return retval;
+ memset(bts_record, 0, bts_cfg.sizeof_bts);
+ switch (in->qualifier) {
+ case BTS_INVALID:
+ break;
- return sizeof(*in);
-}
+ case BTS_BRANCH:
+ bts_set(bts_record, bts_from, in->variant.lbr.from_ip);
+ bts_set(bts_record, bts_to, in->variant.lbr.to_ip);
+ break;
-static int ptrace_bts_realloc(struct task_struct *child,
- int size, int reduce_size)
-{
- unsigned long rlim, vm;
- int ret, old_size;
+ case BTS_TASK_ARRIVES:
+ case BTS_TASK_DEPARTS:
+ bts_set(bts_record, bts_from, bts_escape);
+ bts_set(bts_record, bts_qual, in->qualifier);
+ bts_set(bts_record, bts_jiffies, in->variant.jiffies);
+ break;
- if (size < 0)
+ default:
return -EINVAL;
-
- old_size = ds_get_bts_size((void *)child->thread.ds_area_msr);
- if (old_size < 0)
- return old_size;
-
- ret = ds_free((void **)&child->thread.ds_area_msr);
- if (ret < 0)
- goto out;
-
- size >>= PAGE_SHIFT;
- old_size >>= PAGE_SHIFT;
-
- current->mm->total_vm -= old_size;
- current->mm->locked_vm -= old_size;
-
- if (size == 0)
- goto out;
-
- rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT;
- vm = current->mm->total_vm + size;
- if (rlim < vm) {
- ret = -ENOMEM;
-
- if (!reduce_size)
- goto out;
-
- size = rlim - current->mm->total_vm;
- if (size <= 0)
- goto out;
- }
-
- rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT;
- vm = current->mm->locked_vm + size;
- if (rlim < vm) {
- ret = -ENOMEM;
-
- if (!reduce_size)
- goto out;
-
- size = rlim - current->mm->locked_vm;
- if (size <= 0)
- goto out;
}
- ret = ds_allocate((void **)&child->thread.ds_area_msr,
- size << PAGE_SHIFT);
- if (ret < 0)
- goto out;
-
- current->mm->total_vm += size;
- current->mm->locked_vm += size;
-
-out:
- if (child->thread.ds_area_msr)
- set_tsk_thread_flag(child, TIF_DS_AREA_MSR);
- else
- clear_tsk_thread_flag(child, TIF_DS_AREA_MSR);
-
- return ret;
+ /* The writing task will be the switched-to task on a context
+ * switch. It needs to write into the switched-from task's BTS
+ * buffer. */
+ return ds_unchecked_write_bts(child, bts_record, bts_cfg.sizeof_bts);
}
void ptrace_bts_take_timestamp(struct task_struct *tsk,
ptrace_bts_write_record(tsk, &rec);
}
-#endif /* X86_BTS */
+
+static const struct bts_configuration bts_cfg_netburst = {
+ .sizeof_bts = sizeof(long) * 3,
+ .sizeof_field = sizeof(long),
+ .debugctl_mask = (1<<2)|(1<<3)|(1<<5)
+};
+
+static const struct bts_configuration bts_cfg_pentium_m = {
+ .sizeof_bts = sizeof(long) * 3,
+ .sizeof_field = sizeof(long),
+ .debugctl_mask = (1<<6)|(1<<7)
+};
+
+static const struct bts_configuration bts_cfg_core2 = {
+ .sizeof_bts = 8 * 3,
+ .sizeof_field = 8,
+ .debugctl_mask = (1<<6)|(1<<7)|(1<<9)
+};
+
+static inline void bts_configure(const struct bts_configuration *cfg)
+{
+ bts_cfg = *cfg;
+}
+
+void __cpuinit ptrace_bts_init_intel(struct cpuinfo_x86 *c)
+{
+ switch (c->x86) {
+ case 0x6:
+ switch (c->x86_model) {
+ case 0xD:
+ case 0xE: /* Pentium M */
+ bts_configure(&bts_cfg_pentium_m);
+ break;
+ case 0xF: /* Core2 */
+ case 0x1C: /* Atom */
+ bts_configure(&bts_cfg_core2);
+ break;
+ default:
+ /* sorry, don't know about them */
+ break;
+ }
+ break;
+ case 0xF:
+ switch (c->x86_model) {
+ case 0x0:
+ case 0x1:
+ case 0x2: /* Netburst */
+ bts_configure(&bts_cfg_netburst);
+ break;
+ default:
+ /* sorry, don't know about them */
+ break;
+ }
+ break;
+ default:
+ /* sorry, don't know about them */
+ break;
+ }
+}
+#endif /* CONFIG_X86_PTRACE_BTS */
/*
* Called by kernel/ptrace.c when detaching..
#ifdef TIF_SYSCALL_EMU
clear_tsk_thread_flag(child, TIF_SYSCALL_EMU);
#endif
- if (child->thread.ds_area_msr) {
-#ifdef X86_BTS
- ptrace_bts_realloc(child, 0, 0);
-#endif
- child->thread.debugctlmsr &= ~ds_debugctl_mask();
- if (!child->thread.debugctlmsr)
- clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
- clear_tsk_thread_flag(child, TIF_BTS_TRACE_TS);
- }
+#ifdef CONFIG_X86_PTRACE_BTS
+ (void)ds_release_bts(child);
+
+ child->thread.debugctlmsr &= ~bts_cfg.debugctl_mask;
+ if (!child->thread.debugctlmsr)
+ clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
+
+ clear_tsk_thread_flag(child, TIF_BTS_TRACE_TS);
+#endif /* CONFIG_X86_PTRACE_BTS */
}
#if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
/*
* These bits need more cooking - not enabled yet:
*/
-#ifdef X86_BTS
+#ifdef CONFIG_X86_PTRACE_BTS
case PTRACE_BTS_CONFIG:
ret = ptrace_bts_config
(child, data, (struct ptrace_bts_config __user *)addr);
break;
case PTRACE_BTS_SIZE:
- ret = ptrace_bts_get_size(child);
+ ret = ds_get_bts_index(child, /* pos = */ NULL);
break;
case PTRACE_BTS_GET:
break;
case PTRACE_BTS_CLEAR:
- ret = ptrace_bts_clear(child);
+ ret = ds_clear_bts(child);
break;
case PTRACE_BTS_DRAIN:
ret = ptrace_bts_drain
(child, data, (struct bts_struct __user *) addr);
break;
-#endif
+#endif /* CONFIG_X86_PTRACE_BTS */
default:
ret = ptrace_request(child, request, addr, data);
force_sig_info(SIGTRAP, &info, tsk);
}
-static void syscall_trace(struct pt_regs *regs)
-{
- if (!(current->ptrace & PT_PTRACED))
- return;
-
-#if 0
- printk("trace %s ip %lx sp %lx ax %d origrax %d caller %lx tiflags %x ptrace %x\n",
- current->comm,
- regs->ip, regs->sp, regs->ax, regs->orig_ax, __builtin_return_address(0),
- current_thread_info()->flags, current->ptrace);
-#endif
-
- ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
- ? 0x80 : 0));
- /*
- * this isn't the same as continuing with a signal, but it will do
- * for normal use. strace only continues with a signal if the
- * stopping signal is not SIGTRAP. -brl
- */
- if (current->exit_code) {
- send_sig(current->exit_code, current, 1);
- current->exit_code = 0;
- }
-}
#ifdef CONFIG_X86_32
# define IS_IA32 1
if (unlikely(test_thread_flag(TIF_SYSCALL_EMU)))
ret = -1L;
- if (ret || test_thread_flag(TIF_SYSCALL_TRACE))
- syscall_trace(regs);
+ if ((ret || test_thread_flag(TIF_SYSCALL_TRACE)) &&
+ tracehook_report_syscall_entry(regs))
+ ret = -1L;
if (unlikely(current->audit_context)) {
if (IS_IA32)
audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax);
if (test_thread_flag(TIF_SYSCALL_TRACE))
- syscall_trace(regs);
+ tracehook_report_syscall_exit(regs, 0);
/*
* If TIF_SYSCALL_EMU is set, we only get here because of
* system call instruction.
*/
if (test_thread_flag(TIF_SINGLESTEP) &&
- (current->ptrace & PT_PTRACED))
+ tracehook_consider_fatal_signal(current, SIGTRAP, SIG_DFL))
send_sigtrap(current, regs, 0);
}
static const struct desc_ptr no_idt = {};
static int reboot_mode;
-enum reboot_type reboot_type = BOOT_KBD;
+/*
+ * Keyboard reset and triple fault may result in INIT, not RESET, which
+ * doesn't work when we're in vmx root mode. Try ACPI first.
+ */
+enum reboot_type reboot_type = BOOT_ACPI;
int reboot_force;
#if defined(CONFIG_X86_32) && defined(CONFIG_SMP)
#define RAMDISK_LOAD_FLAG 0x4000
static char __initdata command_line[COMMAND_LINE_SIZE];
+#ifdef CONFIG_CMDLINE_BOOL
+static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
+#endif
#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
struct edd edd;
bss_resource.start = virt_to_phys(&__bss_start);
bss_resource.end = virt_to_phys(&__bss_stop)-1;
+#ifdef CONFIG_CMDLINE_BOOL
+#ifdef CONFIG_CMDLINE_OVERRIDE
+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#else
+ if (builtin_cmdline[0]) {
+ /* append boot loader cmdline to builtin */
+ strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
+ strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+ }
+#endif
+#endif
+
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
parse_early_param();
+#ifdef CONFIG_X86_64
+ check_efer();
+#endif
+
#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
/*
* Must be before kernel pagetables are setup
#else
num_physpages = max_pfn;
- check_efer();
/* How many end-of-memory variables you have, grandma! */
/* need this before calling reserve_initrd */
printk(KERN_INFO
"cpu %d has no node %d or node-local memory\n",
cpu, node);
+ if (ptr)
+ printk(KERN_DEBUG "per cpu data for cpu%d at %016lx\n",
+ cpu, __pa(ptr));
}
- else
+ else {
ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
+ if (ptr)
+ printk(KERN_DEBUG "per cpu data for cpu%d on node%d at %016lx\n",
+ cpu, node, __pa(ptr));
+ }
#endif
per_cpu_offset(cpu) = ptr - __per_cpu_start;
memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
struct ucontext uc;
struct siginfo info;
};
+
+int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs *regs);
+int ia32_setup_frame(int sig, struct k_sigaction *ka,
+ sigset_t *set, struct pt_regs *regs);
#endif
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/wait.h>
+#include <linux/tracehook.h>
#include <linux/elf.h>
#include <linux/smp.h>
#include <linux/mm.h>
#include <asm/uaccess.h>
#include <asm/i387.h>
#include <asm/vdso.h>
+#include <asm/syscalls.h>
#include "sigframe.h"
* handler too.
*/
regs->flags &= ~X86_EFLAGS_TF;
- if (test_thread_flag(TIF_SINGLESTEP))
- ptrace_notify(SIGTRAP);
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
+ tracehook_signal_handler(sig, info, ka, regs,
+ test_thread_flag(TIF_SINGLESTEP));
+
return 0;
}
if (thread_info_flags & _TIF_SIGPENDING)
do_signal(regs);
+ if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ }
+
clear_thread_flag(TIF_IRET);
}
#include <linux/errno.h>
#include <linux/wait.h>
#include <linux/ptrace.h>
+#include <linux/tracehook.h>
#include <linux/unistd.h>
#include <linux/stddef.h>
#include <linux/personality.h>
#include <linux/compiler.h>
+#include <linux/uaccess.h>
+
#include <asm/processor.h>
#include <asm/ucontext.h>
-#include <asm/uaccess.h>
#include <asm/i387.h>
#include <asm/proto.h>
#include <asm/ia32_unistd.h>
#include <asm/mce.h>
+#include <asm/syscall.h>
+#include <asm/syscalls.h>
#include "sigframe.h"
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
# define FIX_EFLAGS __FIX_EFLAGS
#endif
-int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
- sigset_t *set, struct pt_regs * regs);
-int ia32_setup_frame(int sig, struct k_sigaction *ka,
- sigset_t *set, struct pt_regs * regs);
-
asmlinkage long
sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
struct pt_regs *regs)
/* Always make any pending restarted system calls return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
-#define COPY(x) err |= __get_user(regs->x, &sc->x)
+#define COPY(x) (err |= __get_user(regs->x, &sc->x))
COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
COPY(dx); COPY(cx); COPY(ip);
}
{
- struct _fpstate __user * buf;
+ struct _fpstate __user *buf;
err |= __get_user(buf, &sc->fpstate);
if (buf) {
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
-
+
if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax))
goto badframe;
return ax;
badframe:
- signal_fault(regs,frame,"sigreturn");
+ signal_fault(regs, frame, "sigreturn");
return 0;
-}
+}
/*
* Set up a signal frame.
*/
static inline int
-setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, unsigned long mask, struct task_struct *me)
+setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
+ unsigned long mask, struct task_struct *me)
{
int err = 0;
}
static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
- sigset_t *set, struct pt_regs * regs)
+ sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
- struct _fpstate __user *fp = NULL;
+ struct _fpstate __user *fp = NULL;
int err = 0;
struct task_struct *me = current;
if (used_math()) {
- fp = get_stack(ka, regs, sizeof(struct _fpstate));
+ fp = get_stack(ka, regs, sizeof(struct _fpstate));
frame = (void __user *)round_down(
(unsigned long)fp - sizeof(struct rt_sigframe), 16) - 8;
if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate)))
goto give_sigsegv;
- if (save_i387(fp) < 0)
- err |= -1;
+ if (save_i387(fp) < 0)
+ err |= -1;
} else
frame = get_stack(ka, regs, sizeof(struct rt_sigframe)) - 8;
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
goto give_sigsegv;
- if (ka->sa.sa_flags & SA_SIGINFO) {
+ if (ka->sa.sa_flags & SA_SIGINFO) {
err |= copy_siginfo_to_user(&frame->info, info);
if (err)
goto give_sigsegv;
}
-
+
/* Create the ucontext. */
err |= __put_user(0, &frame->uc.uc_flags);
err |= __put_user(0, &frame->uc.uc_link);
err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size);
err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0], me);
err |= __put_user(fp, &frame->uc.uc_mcontext.fpstate);
- if (sizeof(*set) == 16) {
+ if (sizeof(*set) == 16) {
__put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]);
- __put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]);
+ __put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]);
} else
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
err |= __put_user(ka->sa.sa_restorer, &frame->pretcode);
} else {
/* could use a vstub here */
- goto give_sigsegv;
+ goto give_sigsegv;
}
if (err)
/* Set up registers for signal handler */
regs->di = sig;
- /* In case the signal handler was declared without prototypes */
+ /* In case the signal handler was declared without prototypes */
regs->ax = 0;
/* This also works for non SA_SIGINFO handlers because they expect the
return -EFAULT;
}
-/*
- * Return -1L or the syscall number that @regs is executing.
- */
-static long current_syscall(struct pt_regs *regs)
-{
- /*
- * We always sign-extend a -1 value being set here,
- * so this is always either -1L or a syscall number.
- */
- return regs->orig_ax;
-}
-
-/*
- * Return a value that is -EFOO if the system call in @regs->orig_ax
- * returned an error. This only works for @regs from @current.
- */
-static long current_syscall_ret(struct pt_regs *regs)
-{
-#ifdef CONFIG_IA32_EMULATION
- if (test_thread_flag(TIF_IA32))
- /*
- * Sign-extend the value so (int)-EFOO becomes (long)-EFOO
- * and will match correctly in comparisons.
- */
- return (int) regs->ax;
-#endif
- return regs->ax;
-}
-
/*
* OK, we're invoking a handler
- */
+ */
static int
handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
int ret;
/* Are we from a system call? */
- if (current_syscall(regs) >= 0) {
+ if (syscall_get_nr(current, regs) >= 0) {
/* If so, check system call restarting.. */
- switch (current_syscall_ret(regs)) {
+ switch (syscall_get_error(current, regs)) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
regs->ax = -EINTR;
ret = ia32_setup_rt_frame(sig, ka, info, oldset, regs);
else
ret = ia32_setup_frame(sig, ka, oldset, regs);
- } else
+ } else
#endif
ret = setup_rt_frame(sig, ka, info, oldset, regs);
* handler too.
*/
regs->flags &= ~X86_EFLAGS_TF;
- if (test_thread_flag(TIF_SINGLESTEP))
- ptrace_notify(SIGTRAP);
spin_lock_irq(¤t->sighand->siglock);
- sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
+ sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
- sigaddset(¤t->blocked,sig);
+ sigaddset(¤t->blocked, sig);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
+
+ tracehook_signal_handler(sig, info, ka, regs,
+ test_thread_flag(TIF_SINGLESTEP));
}
return ret;
}
/* Did we come from a system call? */
- if (current_syscall(regs) >= 0) {
+ if (syscall_get_nr(current, regs) >= 0) {
/* Restart the system call - no handlers present */
- switch (current_syscall_ret(regs)) {
+ switch (syscall_get_error(current, regs)) {
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
/* deal with pending signal delivery */
if (thread_info_flags & _TIF_SIGPENDING)
do_signal(regs);
+
+ if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ }
}
void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
-{
- struct task_struct *me = current;
+{
+ struct task_struct *me = current;
if (show_unhandled_signals && printk_ratelimit()) {
printk("%s[%d] bad frame in %s frame:%p ip:%lx sp:%lx orax:%lx",
- me->comm,me->pid,where,frame,regs->ip,regs->sp,regs->orig_ax);
+ me->comm, me->pid, where, frame, regs->ip,
+ regs->sp, regs->orig_ax);
print_vma_addr(" in ", regs->ip);
printk("\n");
}
- force_sig(SIGSEGV, me);
-}
+ force_sig(SIGSEGV, me);
+}
#define get_idle_for_cpu(x) (per_cpu(idle_thread_array, x))
#define set_idle_for_cpu(x, p) (per_cpu(idle_thread_array, x) = (p))
#else
-struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
+static struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
#define get_idle_for_cpu(x) (idle_thread_array[(x)])
#define set_idle_for_cpu(x, p) (idle_thread_array[(x)] = (p))
#endif
static cpumask_t cpu_sibling_setup_map;
/* Set if we find a B stepping CPU */
-int __cpuinitdata smp_b_stepping;
+static int __cpuinitdata smp_b_stepping;
#if defined(CONFIG_NUMA) && defined(CONFIG_X86_32)
if (!num_processors)
num_processors = 1;
-#ifdef CONFIG_HOTPLUG_CPU
if (additional_cpus == -1) {
if (disabled_cpus > 0)
additional_cpus = disabled_cpus;
else
additional_cpus = 0;
}
-#else
- additional_cpus = 0;
-#endif
+
possible = num_processors + additional_cpus;
if (possible > NR_CPUS)
possible = NR_CPUS;
#include <linux/uaccess.h>
#include <linux/unistd.h>
+#include <asm/syscalls.h>
+
asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags,
unsigned long fd, unsigned long pgoff)
#include <linux/utsname.h>
#include <linux/personality.h>
#include <linux/random.h>
+#include <linux/uaccess.h>
-#include <asm/uaccess.h>
#include <asm/ia32.h>
+#include <asm/syscalls.h>
-asmlinkage long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags,
- unsigned long fd, unsigned long off)
+asmlinkage long sys_mmap(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long off)
{
long error;
- struct file * file;
+ struct file *file;
error = -EINVAL;
if (off & ~PAGE_MASK)
unmapped base down for this case. This can give
conflicts with the heap, but we assume that glibc
malloc knows how to fall back to mmap. Give it 1GB
- of playground for now. -AK */
- *begin = 0x40000000;
- *end = 0x80000000;
+ of playground for now. -AK */
+ *begin = 0x40000000;
+ *end = 0x80000000;
if (current->flags & PF_RANDOMIZE) {
new_begin = randomize_range(*begin, *begin + 0x02000000, 0);
if (new_begin)
}
} else {
*begin = TASK_UNMAPPED_BASE;
- *end = TASK_SIZE;
+ *end = TASK_SIZE;
}
-}
+}
unsigned long
arch_get_unmapped_area(struct file *filp, unsigned long addr,
struct vm_area_struct *vma;
unsigned long start_addr;
unsigned long begin, end;
-
+
if (flags & MAP_FIXED)
return addr;
- find_start_end(flags, &begin, &end);
+ find_start_end(flags, &begin, &end);
if (len > end)
return -ENOMEM;
}
if (((flags & MAP_32BIT) || test_thread_flag(TIF_IA32))
&& len <= mm->cached_hole_size) {
- mm->cached_hole_size = 0;
+ mm->cached_hole_size = 0;
mm->free_area_cache = begin;
}
addr = mm->free_area_cache;
- if (addr < begin)
- addr = begin;
+ if (addr < begin)
+ addr = begin;
start_addr = addr;
full_search:
return addr;
}
if (addr + mm->cached_hole_size < vma->vm_start)
- mm->cached_hole_size = vma->vm_start - addr;
+ mm->cached_hole_size = vma->vm_start - addr;
addr = vma->vm_end;
}
vma = find_vma(mm, addr-len);
if (!vma || addr <= vma->vm_start)
/* remember the address as a hint for next time */
- return (mm->free_area_cache = addr-len);
+ return mm->free_area_cache = addr-len;
}
if (mm->mmap_base < len)
vma = find_vma(mm, addr);
if (!vma || addr+len <= vma->vm_start)
/* remember the address as a hint for next time */
- return (mm->free_area_cache = addr);
+ return mm->free_area_cache = addr;
/* remember the largest hole we saw so far */
if (addr + mm->cached_hole_size < vma->vm_start)
}
-asmlinkage long sys_uname(struct new_utsname __user * name)
+asmlinkage long sys_uname(struct new_utsname __user *name)
{
int err;
down_read(&uts_sem);
- err = copy_to_user(name, utsname(), sizeof (*name));
+ err = copy_to_user(name, utsname(), sizeof(*name));
up_read(&uts_sem);
- if (personality(current->personality) == PER_LINUX32)
- err |= copy_to_user(&name->machine, "i686", 5);
+ if (personality(current->personality) == PER_LINUX32)
+ err |= copy_to_user(&name->machine, "i686", 5);
return err ? -EFAULT : 0;
}
#define __NO_STUBS
#define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ;
-#undef _ASM_X86_64_UNISTD_H_
+#undef ASM_X86__UNISTD_64_H
#include <asm/unistd_64.h>
#undef __SYSCALL
#define __SYSCALL(nr, sym) [nr] = sym,
-#undef _ASM_X86_64_UNISTD_H_
+#undef ASM_X86__UNISTD_64_H
typedef void (*sys_call_ptr_t)(void);
#include <asm/arch_hooks.h>
#include <asm/hpet.h>
#include <asm/time.h>
+#include <asm/timer.h>
#include "do_timer.h"
#include <asm/ldt.h>
#include <asm/processor.h>
#include <asm/proto.h>
+#include <asm/syscalls.h>
#include "tls.h"
#include <linux/bug.h>
#include <linux/nmi.h>
#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/io.h>
#if defined(CONFIG_EDAC)
#include <linux/edac.h>
#include <asm/unwind.h>
#include <asm/desc.h>
#include <asm/i387.h>
-#include <asm/nmi.h>
-#include <asm/smp.h>
-#include <asm/io.h>
#include <asm/pgalloc.h>
#include <asm/proto.h>
#include <asm/pda.h>
void printk_address(unsigned long address, int reliable)
{
- printk(" [<%016lx>] %s%pS\n", address, reliable ? "": "? ", (void *) address);
+ printk(" [<%016lx>] %s%pS\n",
+ address, reliable ? "" : "? ", (void *) address);
}
static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
[STACKFAULT_STACK - 1] = "#SS",
[MCE_STACK - 1] = "#MC",
#if DEBUG_STKSZ > EXCEPTION_STKSZ
- [N_EXCEPTION_STACKS ... N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]"
+ [N_EXCEPTION_STACKS ...
+ N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]"
#endif
};
unsigned k;
}
/*
- * x86-64 can have up to three kernel stacks:
+ * x86-64 can have up to three kernel stacks:
* process stack
* interrupt stack
* severe exception (double fault, nmi, stack fault, debug, mce) hardware stack
const struct stacktrace_ops *ops, void *data)
{
const unsigned cpu = get_cpu();
- unsigned long *irqstack_end = (unsigned long*)cpu_pda(cpu)->irqstackptr;
+ unsigned long *irqstack_end = (unsigned long *)cpu_pda(cpu)->irqstackptr;
unsigned used = 0;
struct thread_info *tinfo;
if (!bp) {
if (task == current) {
/* Grab bp right from our regs */
- asm("movq %%rbp, %0" : "=r" (bp) :);
+ asm("movq %%rbp, %0" : "=r" (bp) : );
} else {
/* bp is the last reg pushed by switch_to */
bp = *(unsigned long *) task->thread.sp;
show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
unsigned long *stack, unsigned long bp, char *log_lvl)
{
- printk("\nCall Trace:\n");
+ printk("Call Trace:\n");
dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
- printk("\n");
}
void show_trace(struct task_struct *task, struct pt_regs *regs,
unsigned long *stack;
int i;
const int cpu = smp_processor_id();
- unsigned long *irqstack_end = (unsigned long *) (cpu_pda(cpu)->irqstackptr);
- unsigned long *irqstack = (unsigned long *) (cpu_pda(cpu)->irqstackptr - IRQSTACKSIZE);
+ unsigned long *irqstack_end =
+ (unsigned long *) (cpu_pda(cpu)->irqstackptr);
+ unsigned long *irqstack =
+ (unsigned long *) (cpu_pda(cpu)->irqstackptr - IRQSTACKSIZE);
- // debugging aid: "show_stack(NULL, NULL);" prints the
- // back trace for this cpu.
+ /*
+ * debugging aid: "show_stack(NULL, NULL);" prints the
+ * back trace for this cpu.
+ */
if (sp == NULL) {
if (task)
printk(" %016lx", *stack++);
touch_nmi_watchdog();
}
+ printk("\n");
show_trace_log_lvl(task, regs, sp, bp, log_lvl);
}
#ifdef CONFIG_FRAME_POINTER
if (!bp)
- asm("movq %%rbp, %0" : "=r" (bp):);
+ asm("movq %%rbp, %0" : "=r" (bp) : );
#endif
printk("Pid: %d, comm: %.20s %s %s %.*s\n",
init_utsname()->version);
show_trace(NULL, NULL, &stack, bp);
}
-
EXPORT_SYMBOL(dump_stack);
void show_registers(struct pt_regs *regs)
printk("Stack: ");
show_stack_log_lvl(NULL, regs, (unsigned long *)sp,
regs->bp, "");
- printk("\n");
printk(KERN_EMERG "Code: ");
raw_local_irq_save(flags);
cpu = smp_processor_id();
if (!__raw_spin_trylock(&die_lock)) {
- if (cpu == die_owner)
+ if (cpu == die_owner)
/* nested oops. should stop eventually */;
else
__raw_spin_lock(&die_lock);
}
#define DO_ERROR(trapnr, signr, str, name) \
-asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
+asmlinkage void do_##name(struct pt_regs *regs, long error_code) \
{ \
if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
== NOTIFY_STOP) \
}
#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
-asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
+asmlinkage void do_##name(struct pt_regs *regs, long error_code) \
{ \
siginfo_t info; \
info.si_signo = signr; \
preempt_conditional_cli(regs);
}
-asmlinkage void do_double_fault(struct pt_regs * regs, long error_code)
+asmlinkage void do_double_fault(struct pt_regs *regs, long error_code)
{
static const char str[] = "double fault";
struct task_struct *tsk = current;
}
static notrace __kprobes void
-unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
+unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
{
- if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
+ if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) ==
+ NOTIFY_STOP)
return;
printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n",
reason);
else if (user_mode(eregs))
regs = task_pt_regs(current);
/* Exception from kernel and interrupts are enabled. Move to
- kernel process stack. */
+ kernel process stack. */
else if (eregs->flags & X86_EFLAGS_IF)
regs = (struct pt_regs *)(eregs->sp -= sizeof(struct pt_regs));
if (eregs != regs)
}
/* runs on IST stack. */
-asmlinkage void __kprobes do_debug(struct pt_regs * regs,
+asmlinkage void __kprobes do_debug(struct pt_regs *regs,
unsigned long error_code)
{
struct task_struct *tsk = current;
asmlinkage void bad_intr(void)
{
- printk("bad interrupt");
+ printk("bad interrupt");
}
asmlinkage void do_simd_coprocessor_error(struct pt_regs *regs)
conditional_sti(regs);
if (!user_mode(regs) &&
- kernel_math_error(regs, "kernel simd math error", 19))
+ kernel_math_error(regs, "kernel simd math error", 19))
return;
/*
force_sig_info(SIGFPE, &info, task);
}
-asmlinkage void do_spurious_interrupt_bug(struct pt_regs * regs)
+asmlinkage void do_spurious_interrupt_bug(struct pt_regs *regs)
{
}
set_intr_gate(0, ÷_error);
set_intr_gate_ist(1, &debug, DEBUG_STACK);
set_intr_gate_ist(2, &nmi, NMI_STACK);
- set_system_gate_ist(3, &int3, DEBUG_STACK); /* int3 can be called from all */
- set_system_gate(4, &overflow); /* int4 can be called from all */
+ /* int3 can be called from all */
+ set_system_gate_ist(3, &int3, DEBUG_STACK);
+ /* int4 can be called from all */
+ set_system_gate(4, &overflow);
set_intr_gate(5, &bounds);
set_intr_gate(6, &invalid_op);
set_intr_gate(7, &device_not_available);
/*
* Read TSC and the reference counters. Take care of SMI disturbance
*/
-static u64 tsc_read_refs(u64 *pm, u64 *hpet)
+static u64 tsc_read_refs(u64 *p, int hpet)
{
u64 t1, t2;
int i;
for (i = 0; i < MAX_RETRIES; i++) {
t1 = get_cycles();
if (hpet)
- *hpet = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF;
+ *p = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF;
else
- *pm = acpi_pm_read_early();
+ *p = acpi_pm_read_early();
t2 = get_cycles();
if ((t2 - t1) < SMI_TRESHOLD)
return t2;
return ULLONG_MAX;
}
-/**
- * native_calibrate_tsc - calibrate the tsc on boot
+/*
+ * Calculate the TSC frequency from HPET reference
*/
-unsigned long native_calibrate_tsc(void)
+static unsigned long calc_hpet_ref(u64 deltatsc, u64 hpet1, u64 hpet2)
{
- unsigned long flags;
- u64 tsc1, tsc2, tr1, tr2, delta, pm1, pm2, hpet1, hpet2;
- int hpet = is_hpet_enabled();
- unsigned int tsc_khz_val = 0;
+ u64 tmp;
- local_irq_save(flags);
+ if (hpet2 < hpet1)
+ hpet2 += 0x100000000ULL;
+ hpet2 -= hpet1;
+ tmp = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
+ do_div(tmp, 1000000);
+ do_div(deltatsc, tmp);
+
+ return (unsigned long) deltatsc;
+}
+
+/*
+ * Calculate the TSC frequency from PMTimer reference
+ */
+static unsigned long calc_pmtimer_ref(u64 deltatsc, u64 pm1, u64 pm2)
+{
+ u64 tmp;
- tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
+ if (!pm1 && !pm2)
+ return ULONG_MAX;
+ if (pm2 < pm1)
+ pm2 += (u64)ACPI_PM_OVRRUN;
+ pm2 -= pm1;
+ tmp = pm2 * 1000000000LL;
+ do_div(tmp, PMTMR_TICKS_PER_SEC);
+ do_div(deltatsc, tmp);
+
+ return (unsigned long) deltatsc;
+}
+
+#define CAL_MS 10
+#define CAL_LATCH (CLOCK_TICK_RATE / (1000 / CAL_MS))
+#define CAL_PIT_LOOPS 1000
+
+#define CAL2_MS 50
+#define CAL2_LATCH (CLOCK_TICK_RATE / (1000 / CAL2_MS))
+#define CAL2_PIT_LOOPS 5000
+
+
+/*
+ * Try to calibrate the TSC against the Programmable
+ * Interrupt Timer and return the frequency of the TSC
+ * in kHz.
+ *
+ * Return ULONG_MAX on failure to calibrate.
+ */
+static unsigned long pit_calibrate_tsc(u32 latch, unsigned long ms, int loopmin)
+{
+ u64 tsc, t1, t2, delta;
+ unsigned long tscmin, tscmax;
+ int pitcnt;
+
+ /* Set the Gate high, disable speaker */
outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+ /*
+ * Setup CTC channel 2* for mode 0, (interrupt on terminal
+ * count mode), binary count. Set the latch register to 50ms
+ * (LSB then MSB) to begin countdown.
+ */
outb(0xb0, 0x43);
- outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
- outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
- tr1 = get_cycles();
- while ((inb(0x61) & 0x20) == 0);
- tr2 = get_cycles();
+ outb(latch & 0xff, 0x42);
+ outb(latch >> 8, 0x42);
+
+ tsc = t1 = t2 = get_cycles();
+
+ pitcnt = 0;
+ tscmax = 0;
+ tscmin = ULONG_MAX;
+ while ((inb(0x61) & 0x20) == 0) {
+ t2 = get_cycles();
+ delta = t2 - tsc;
+ tsc = t2;
+ if ((unsigned long) delta < tscmin)
+ tscmin = (unsigned int) delta;
+ if ((unsigned long) delta > tscmax)
+ tscmax = (unsigned int) delta;
+ pitcnt++;
+ }
+
+ /*
+ * Sanity checks:
+ *
+ * If we were not able to read the PIT more than loopmin
+ * times, then we have been hit by a massive SMI
+ *
+ * If the maximum is 10 times larger than the minimum,
+ * then we got hit by an SMI as well.
+ */
+ if (pitcnt < loopmin || tscmax > 10 * tscmin)
+ return ULONG_MAX;
- tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
+ /* Calculate the PIT value */
+ delta = t2 - t1;
+ do_div(delta, ms);
+ return delta;
+}
+/*
+ * This reads the current MSB of the PIT counter, and
+ * checks if we are running on sufficiently fast and
+ * non-virtualized hardware.
+ *
+ * Our expectations are:
+ *
+ * - the PIT is running at roughly 1.19MHz
+ *
+ * - each IO is going to take about 1us on real hardware,
+ * but we allow it to be much faster (by a factor of 10) or
+ * _slightly_ slower (ie we allow up to a 2us read+counter
+ * update - anything else implies a unacceptably slow CPU
+ * or PIT for the fast calibration to work.
+ *
+ * - with 256 PIT ticks to read the value, we have 214us to
+ * see the same MSB (and overhead like doing a single TSC
+ * read per MSB value etc).
+ *
+ * - We're doing 2 reads per loop (LSB, MSB), and we expect
+ * them each to take about a microsecond on real hardware.
+ * So we expect a count value of around 100. But we'll be
+ * generous, and accept anything over 50.
+ *
+ * - if the PIT is stuck, and we see *many* more reads, we
+ * return early (and the next caller of pit_expect_msb()
+ * then consider it a failure when they don't see the
+ * next expected value).
+ *
+ * These expectations mean that we know that we have seen the
+ * transition from one expected value to another with a fairly
+ * high accuracy, and we didn't miss any events. We can thus
+ * use the TSC value at the transitions to calculate a pretty
+ * good value for the TSC frequencty.
+ */
+static inline int pit_expect_msb(unsigned char val)
+{
+ int count = 0;
+
+ for (count = 0; count < 50000; count++) {
+ /* Ignore LSB */
+ inb(0x42);
+ if (inb(0x42) != val)
+ break;
+ }
+ return count > 50;
+}
+
+/*
+ * How many MSB values do we want to see? We aim for a
+ * 15ms calibration, which assuming a 2us counter read
+ * error should give us roughly 150 ppm precision for
+ * the calibration.
+ */
+#define QUICK_PIT_MS 15
+#define QUICK_PIT_ITERATIONS (QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256)
+
+static unsigned long quick_pit_calibrate(void)
+{
+ /* Set the Gate high, disable speaker */
+ outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+ /*
+ * Counter 2, mode 0 (one-shot), binary count
+ *
+ * NOTE! Mode 2 decrements by two (and then the
+ * output is flipped each time, giving the same
+ * final output frequency as a decrement-by-one),
+ * so mode 0 is much better when looking at the
+ * individual counts.
+ */
+ outb(0xb0, 0x43);
+
+ /* Start at 0xffff */
+ outb(0xff, 0x42);
+ outb(0xff, 0x42);
+
+ if (pit_expect_msb(0xff)) {
+ int i;
+ u64 t1, t2, delta;
+ unsigned char expect = 0xfe;
+
+ t1 = get_cycles();
+ for (i = 0; i < QUICK_PIT_ITERATIONS; i++, expect--) {
+ if (!pit_expect_msb(expect))
+ goto failed;
+ }
+ t2 = get_cycles();
+
+ /*
+ * Make sure we can rely on the second TSC timestamp:
+ */
+ if (!pit_expect_msb(expect))
+ goto failed;
+
+ /*
+ * Ok, if we get here, then we've seen the
+ * MSB of the PIT decrement QUICK_PIT_ITERATIONS
+ * times, and each MSB had many hits, so we never
+ * had any sudden jumps.
+ *
+ * As a result, we can depend on there not being
+ * any odd delays anywhere, and the TSC reads are
+ * reliable.
+ *
+ * kHz = ticks / time-in-seconds / 1000;
+ * kHz = (t2 - t1) / (QPI * 256 / PIT_TICK_RATE) / 1000
+ * kHz = ((t2 - t1) * PIT_TICK_RATE) / (QPI * 256 * 1000)
+ */
+ delta = (t2 - t1)*PIT_TICK_RATE;
+ do_div(delta, QUICK_PIT_ITERATIONS*256*1000);
+ printk("Fast TSC calibration using PIT\n");
+ return delta;
+ }
+failed:
+ return 0;
+}
+
+/**
+ * native_calibrate_tsc - calibrate the tsc on boot
+ */
+unsigned long native_calibrate_tsc(void)
+{
+ u64 tsc1, tsc2, delta, ref1, ref2;
+ unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX;
+ unsigned long flags, latch, ms, fast_calibrate;
+ int hpet = is_hpet_enabled(), i, loopmin;
+
+ local_irq_save(flags);
+ fast_calibrate = quick_pit_calibrate();
local_irq_restore(flags);
+ if (fast_calibrate)
+ return fast_calibrate;
/*
- * Preset the result with the raw and inaccurate PIT
- * calibration value
+ * Run 5 calibration loops to get the lowest frequency value
+ * (the best estimate). We use two different calibration modes
+ * here:
+ *
+ * 1) PIT loop. We set the PIT Channel 2 to oneshot mode and
+ * load a timeout of 50ms. We read the time right after we
+ * started the timer and wait until the PIT count down reaches
+ * zero. In each wait loop iteration we read the TSC and check
+ * the delta to the previous read. We keep track of the min
+ * and max values of that delta. The delta is mostly defined
+ * by the IO time of the PIT access, so we can detect when a
+ * SMI/SMM disturbance happend between the two reads. If the
+ * maximum time is significantly larger than the minimum time,
+ * then we discard the result and have another try.
+ *
+ * 2) Reference counter. If available we use the HPET or the
+ * PMTIMER as a reference to check the sanity of that value.
+ * We use separate TSC readouts and check inside of the
+ * reference read for a SMI/SMM disturbance. We dicard
+ * disturbed values here as well. We do that around the PIT
+ * calibration delay loop as we have to wait for a certain
+ * amount of time anyway.
*/
- delta = (tr2 - tr1);
- do_div(delta, 50);
- tsc_khz_val = delta;
-
- /* hpet or pmtimer available ? */
- if (!hpet && !pm1 && !pm2) {
- printk(KERN_INFO "TSC calibrated against PIT\n");
- goto out;
+
+ /* Preset PIT loop values */
+ latch = CAL_LATCH;
+ ms = CAL_MS;
+ loopmin = CAL_PIT_LOOPS;
+
+ for (i = 0; i < 3; i++) {
+ unsigned long tsc_pit_khz;
+
+ /*
+ * Read the start value and the reference count of
+ * hpet/pmtimer when available. Then do the PIT
+ * calibration, which will take at least 50ms, and
+ * read the end value.
+ */
+ local_irq_save(flags);
+ tsc1 = tsc_read_refs(&ref1, hpet);
+ tsc_pit_khz = pit_calibrate_tsc(latch, ms, loopmin);
+ tsc2 = tsc_read_refs(&ref2, hpet);
+ local_irq_restore(flags);
+
+ /* Pick the lowest PIT TSC calibration so far */
+ tsc_pit_min = min(tsc_pit_min, tsc_pit_khz);
+
+ /* hpet or pmtimer available ? */
+ if (!hpet && !ref1 && !ref2)
+ continue;
+
+ /* Check, whether the sampling was disturbed by an SMI */
+ if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX)
+ continue;
+
+ tsc2 = (tsc2 - tsc1) * 1000000LL;
+ if (hpet)
+ tsc2 = calc_hpet_ref(tsc2, ref1, ref2);
+ else
+ tsc2 = calc_pmtimer_ref(tsc2, ref1, ref2);
+
+ tsc_ref_min = min(tsc_ref_min, (unsigned long) tsc2);
+
+ /* Check the reference deviation */
+ delta = ((u64) tsc_pit_min) * 100;
+ do_div(delta, tsc_ref_min);
+
+ /*
+ * If both calibration results are inside a 10% window
+ * then we can be sure, that the calibration
+ * succeeded. We break out of the loop right away. We
+ * use the reference value, as it is more precise.
+ */
+ if (delta >= 90 && delta <= 110) {
+ printk(KERN_INFO
+ "TSC: PIT calibration matches %s. %d loops\n",
+ hpet ? "HPET" : "PMTIMER", i + 1);
+ return tsc_ref_min;
+ }
+
+ /*
+ * Check whether PIT failed more than once. This
+ * happens in virtualized environments. We need to
+ * give the virtual PC a slightly longer timeframe for
+ * the HPET/PMTIMER to make the result precise.
+ */
+ if (i == 1 && tsc_pit_min == ULONG_MAX) {
+ latch = CAL2_LATCH;
+ ms = CAL2_MS;
+ loopmin = CAL2_PIT_LOOPS;
+ }
}
- /* Check, whether the sampling was disturbed by an SMI */
- if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX) {
- printk(KERN_WARNING "TSC calibration disturbed by SMI, "
- "using PIT calibration result\n");
- goto out;
+ /*
+ * Now check the results.
+ */
+ if (tsc_pit_min == ULONG_MAX) {
+ /* PIT gave no useful value */
+ printk(KERN_WARNING "TSC: Unable to calibrate against PIT\n");
+
+ /* We don't have an alternative source, disable TSC */
+ if (!hpet && !ref1 && !ref2) {
+ printk("TSC: No reference (HPET/PMTIMER) available\n");
+ return 0;
+ }
+
+ /* The alternative source failed as well, disable TSC */
+ if (tsc_ref_min == ULONG_MAX) {
+ printk(KERN_WARNING "TSC: HPET/PMTIMER calibration "
+ "failed.\n");
+ return 0;
+ }
+
+ /* Use the alternative source */
+ printk(KERN_INFO "TSC: using %s reference calibration\n",
+ hpet ? "HPET" : "PMTIMER");
+
+ return tsc_ref_min;
}
- tsc2 = (tsc2 - tsc1) * 1000000LL;
-
- if (hpet) {
- printk(KERN_INFO "TSC calibrated against HPET\n");
- if (hpet2 < hpet1)
- hpet2 += 0x100000000ULL;
- hpet2 -= hpet1;
- tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
- do_div(tsc1, 1000000);
- } else {
- printk(KERN_INFO "TSC calibrated against PM_TIMER\n");
- if (pm2 < pm1)
- pm2 += (u64)ACPI_PM_OVRRUN;
- pm2 -= pm1;
- tsc1 = pm2 * 1000000000LL;
- do_div(tsc1, PMTMR_TICKS_PER_SEC);
+ /* We don't have an alternative source, use the PIT calibration value */
+ if (!hpet && !ref1 && !ref2) {
+ printk(KERN_INFO "TSC: Using PIT calibration value\n");
+ return tsc_pit_min;
}
- do_div(tsc2, tsc1);
- tsc_khz_val = tsc2;
+ /* The alternative source failed, use the PIT calibration value */
+ if (tsc_ref_min == ULONG_MAX) {
+ printk(KERN_WARNING "TSC: HPET/PMTIMER calibration failed. "
+ "Using PIT calibration\n");
+ return tsc_pit_min;
+ }
-out:
- return tsc_khz_val;
+ /*
+ * The calibration values differ too much. In doubt, we use
+ * the PIT value as we know that there are PMTIMERs around
+ * running at double speed. At least we let the user know:
+ */
+ printk(KERN_WARNING "TSC: PIT calibration deviates from %s: %lu %lu.\n",
+ hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min);
+ printk(KERN_INFO "TSC: Using PIT calibration value\n");
+ return tsc_pit_min;
}
-
#ifdef CONFIG_X86_32
/* Only called from the Powernow K7 cpu freq driver */
int recalibrate_cpu_khz(void)
#include <asm/visws/cobalt.h>
#include <asm/visws/piix4.h>
#include <asm/arch_hooks.h>
+#include <asm/io_apic.h>
#include <asm/fixmap.h>
#include <asm/reboot.h>
#include <asm/setup.h>
#include <asm/e820.h>
-#include <asm/smp.h>
#include <asm/io.h>
#include <mach_ipi.h>
#include "mach_apic.h"
-#include <linux/init.h>
-#include <linux/smp.h>
-
#include <linux/kernel_stat.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <asm/apic.h>
#include <asm/i8259.h>
#include <asm/irq_vectors.h>
-#include <asm/visws/cobalt.h>
#include <asm/visws/lithium.h>
-#include <asm/visws/piix4.h>
#include <linux/sched.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
extern int no_broadcast;
-#include <asm/io.h>
#include <asm/apic.h>
-#include <asm/arch_hooks.h>
-#include <asm/visws/cobalt.h>
-#include <asm/visws/lithium.h>
char visws_board_type = -1;
char visws_board_rev = -1;
#include <asm/io.h>
#include <asm/tlbflush.h>
#include <asm/irq.h>
+#include <asm/syscalls.h>
/*
* Known problems:
const void *desc)
{
u32 *ldt_entry = (u32 *)desc;
- vmi_ops.write_idt_entry(dt, entry, ldt_entry[0], ldt_entry[1]);
+ vmi_ops.write_ldt_entry(dt, entry, ldt_entry[0], ldt_entry[1]);
}
static void vmi_load_sp0(struct tss_struct *tss,
}
#endif
-static void vmi_allocate_pte(struct mm_struct *mm, u32 pfn)
+static void vmi_allocate_pte(struct mm_struct *mm, unsigned long pfn)
{
vmi_set_page_type(pfn, VMI_PAGE_L1);
vmi_ops.allocate_page(pfn, VMI_PAGE_L1, 0, 0, 0);
}
-static void vmi_allocate_pmd(struct mm_struct *mm, u32 pfn)
+static void vmi_allocate_pmd(struct mm_struct *mm, unsigned long pfn)
{
/*
* This call comes in very early, before mem_map is setup.
vmi_ops.allocate_page(pfn, VMI_PAGE_L2, 0, 0, 0);
}
-static void vmi_allocate_pmd_clone(u32 pfn, u32 clonepfn, u32 start, u32 count)
+static void vmi_allocate_pmd_clone(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count)
{
vmi_set_page_type(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE);
vmi_check_page_type(clonepfn, VMI_PAGE_L2);
vmi_ops.allocate_page(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE, clonepfn, start, count);
}
-static void vmi_release_pte(u32 pfn)
+static void vmi_release_pte(unsigned long pfn)
{
vmi_ops.release_page(pfn, VMI_PAGE_L1);
vmi_set_page_type(pfn, VMI_PAGE_NORMAL);
}
-static void vmi_release_pmd(u32 pfn)
+static void vmi_release_pmd(unsigned long pfn)
{
vmi_ops.release_page(pfn, VMI_PAGE_L2);
vmi_set_page_type(pfn, VMI_PAGE_NORMAL);
native_restore_fl((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC));
}
-static unsigned __init vsmp_patch(u8 type, u16 clobbers, void *ibuf,
+static unsigned __init_or_module vsmp_patch(u8 type, u16 clobbers, void *ibuf,
unsigned long addr, unsigned len)
{
switch (type) {
u64 *spte;
int young = 0;
+ /* always return old for EPT */
+ if (!shadow_accessed_mask)
+ return 0;
+
spte = rmap_next(kvm, rmapp, NULL);
while (spte) {
int _young;
module_param(npt, int, S_IRUGO);
static void kvm_reput_irq(struct vcpu_svm *svm);
+static void svm_flush_tlb(struct kvm_vcpu *vcpu);
static inline struct vcpu_svm *to_svm(struct kvm_vcpu *vcpu)
{
static void svm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
{
unsigned long host_cr4_mce = read_cr4() & X86_CR4_MCE;
+ unsigned long old_cr4 = to_svm(vcpu)->vmcb->save.cr4;
+
+ if (npt_enabled && ((old_cr4 ^ cr4) & X86_CR4_PGE))
+ force_new_asid(vcpu);
vcpu->arch.cr4 = cr4;
if (!npt_enabled)
KVMTRACE_3D(TDP_FAULT, &svm->vcpu, error_code,
(u32)fault_address, (u32)(fault_address >> 32),
handler);
+ /*
+ * FIXME: Tis shouldn't be necessary here, but there is a flush
+ * missing in the MMU code. Until we find this bug, flush the
+ * complete TLB here on an NPF
+ */
+ if (npt_enabled)
+ svm_flush_tlb(&svm->vcpu);
if (event_injection)
kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
VMX_EPT_WRITABLE_MASK |
VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
- kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK,
- VMX_EPT_FAKE_DIRTY_MASK, 0ull,
+ kvm_mmu_set_mask_ptes(0ull, 0ull, 0ull, 0ull,
VMX_EPT_EXECUTABLE_MASK);
kvm_enable_tdp();
} else
#define VMX_EPT_READABLE_MASK 0x1ull
#define VMX_EPT_WRITABLE_MASK 0x2ull
#define VMX_EPT_EXECUTABLE_MASK 0x4ull
-#define VMX_EPT_FAKE_ACCESSED_MASK (1ull << 62)
-#define VMX_EPT_FAKE_DIRTY_MASK (1ull << 63)
#define VMX_EPT_IDENTITY_PAGETABLE_ADDR 0xfffbc000ul
rdmsr(rv->msr_no, rv->l, rv->h);
}
-static void __rdmsr_safe_on_cpu(void *info)
+static void __wrmsr_on_cpu(void *info)
{
struct msr_info *rv = info;
- rv->err = rdmsr_safe(rv->msr_no, &rv->l, &rv->h);
+ wrmsr(rv->msr_no, rv->l, rv->h);
}
-static int _rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h, int safe)
+int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
{
- int err = 0;
+ int err;
struct msr_info rv;
rv.msr_no = msr_no;
- if (safe) {
- smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1);
- err = rv.err;
- } else {
- smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
- }
+ err = smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
*l = rv.l;
*h = rv.h;
return err;
}
-static void __wrmsr_on_cpu(void *info)
+int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+{
+ int err;
+ struct msr_info rv;
+
+ rv.msr_no = msr_no;
+ rv.l = l;
+ rv.h = h;
+ err = smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
+
+ return err;
+}
+
+/* These "safe" variants are slower and should be used when the target MSR
+ may not actually exist. */
+static void __rdmsr_safe_on_cpu(void *info)
{
struct msr_info *rv = info;
- wrmsr(rv->msr_no, rv->l, rv->h);
+ rv->err = rdmsr_safe(rv->msr_no, &rv->l, &rv->h);
}
static void __wrmsr_safe_on_cpu(void *info)
rv->err = wrmsr_safe(rv->msr_no, rv->l, rv->h);
}
-static int _wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h, int safe)
+int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
{
- int err = 0;
+ int err;
struct msr_info rv;
rv.msr_no = msr_no;
- rv.l = l;
- rv.h = h;
- if (safe) {
- smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1);
- err = rv.err;
- } else {
- smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
- }
-
- return err;
-}
-
-void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
-{
- _wrmsr_on_cpu(cpu, msr_no, l, h, 0);
-}
+ err = smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1);
+ *l = rv.l;
+ *h = rv.h;
-void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
-{
- _rdmsr_on_cpu(cpu, msr_no, l, h, 0);
+ return err ? err : rv.err;
}
-/* These "safe" variants are slower and should be used when the target MSR
- may not actually exist. */
int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
{
- return _wrmsr_on_cpu(cpu, msr_no, l, h, 1);
-}
+ int err;
+ struct msr_info rv;
-int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
-{
- return _rdmsr_on_cpu(cpu, msr_no, l, h, 1);
+ rv.msr_no = msr_no;
+ rv.l = l;
+ rv.h = h;
+ err = smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1);
+
+ return err ? err : rv.err;
}
EXPORT_SYMBOL(rdmsr_on_cpu);
"testb %%al,%%al\n\t"
"jne 1b"
: "=&S" (d0), "=&D" (d1), "=&a" (d2)
- :"0" (src), "1" (dest) : "memory");
+ : "0" (src), "1" (dest) : "memory");
return dest;
}
EXPORT_SYMBOL(strcpy);
"stosb\n"
"2:"
: "=&S" (d0), "=&D" (d1), "=&c" (d2), "=&a" (d3)
- :"0" (src), "1" (dest), "2" (count) : "memory");
+ : "0" (src), "1" (dest), "2" (count) : "memory");
return dest;
}
EXPORT_SYMBOL(strncpy);
"testb %%al,%%al\n\t"
"jne 1b"
: "=&S" (d0), "=&D" (d1), "=&a" (d2), "=&c" (d3)
- : "0" (src), "1" (dest), "2" (0), "3" (0xffffffffu): "memory");
+ : "0" (src), "1" (dest), "2" (0), "3" (0xffffffffu) : "memory");
return dest;
}
EXPORT_SYMBOL(strcat);
"2:\tsbbl %%eax,%%eax\n\t"
"orb $1,%%al\n"
"3:"
- :"=a" (res), "=&S" (d0), "=&D" (d1)
- :"1" (cs), "2" (ct)
- :"memory");
+ : "=a" (res), "=&S" (d0), "=&D" (d1)
+ : "1" (cs), "2" (ct)
+ : "memory");
return res;
}
EXPORT_SYMBOL(strcmp);
"3:\tsbbl %%eax,%%eax\n\t"
"orb $1,%%al\n"
"4:"
- :"=a" (res), "=&S" (d0), "=&D" (d1), "=&c" (d2)
- :"1" (cs), "2" (ct), "3" (count)
- :"memory");
+ : "=a" (res), "=&S" (d0), "=&D" (d1), "=&c" (d2)
+ : "1" (cs), "2" (ct), "3" (count)
+ : "memory");
return res;
}
EXPORT_SYMBOL(strncmp);
"movl $1,%1\n"
"2:\tmovl %1,%0\n\t"
"decl %0"
- :"=a" (res), "=&S" (d0)
- :"1" (s), "0" (c)
- :"memory");
+ : "=a" (res), "=&S" (d0)
+ : "1" (s), "0" (c)
+ : "memory");
return res;
}
EXPORT_SYMBOL(strchr);
"scasb\n\t"
"notl %0\n\t"
"decl %0"
- :"=c" (res), "=&D" (d0)
- :"1" (s), "a" (0), "0" (0xffffffffu)
- :"memory");
+ : "=c" (res), "=&D" (d0)
+ : "1" (s), "a" (0), "0" (0xffffffffu)
+ : "memory");
return res;
}
EXPORT_SYMBOL(strlen);
"je 1f\n\t"
"movl $1,%0\n"
"1:\tdecl %0"
- :"=D" (res), "=&c" (d0)
- :"a" (c), "0" (cs), "1" (count)
- :"memory");
+ : "=D" (res), "=&c" (d0)
+ : "a" (c), "0" (cs), "1" (count)
+ : "memory");
return res;
}
EXPORT_SYMBOL(memchr);
"cmpl $-1,%1\n\t"
"jne 1b\n"
"3:\tsubl %2,%0"
- :"=a" (res), "=&d" (d0)
- :"c" (s), "1" (count)
- :"memory");
+ : "=a" (res), "=&d" (d0)
+ : "c" (s), "1" (count)
+ : "memory");
return res;
}
EXPORT_SYMBOL(strnlen);
"jne 1b\n\t"
"xorl %%eax,%%eax\n\t"
"2:"
- :"=a" (__res), "=&c" (d0), "=&S" (d1)
- :"0" (0), "1" (0xffffffff), "2" (cs), "g" (ct)
- :"dx", "di");
+ : "=a" (__res), "=&c" (d0), "=&S" (d1)
+ : "0" (0), "1" (0xffffffff), "2" (cs), "g" (ct)
+ : "dx", "di");
return __res;
}
#include <asm/e820.h>
#include <asm/setup.h>
+#include <mach_ipi.h>
+
#ifdef CONFIG_HOTPLUG_CPU
#define DEFAULT_SEND_IPI (1)
#else
#define DEFAULT_SEND_IPI (0)
#endif
-int no_broadcast=DEFAULT_SEND_IPI;
+int no_broadcast = DEFAULT_SEND_IPI;
/**
* pre_intr_init_hook - initialisation prior to setting up interrupt vectors
get_memcfg_numa();
- kva_pages = round_up(calculate_numa_remap_pages(), PTRS_PER_PTE);
+ kva_pages = roundup(calculate_numa_remap_pages(), PTRS_PER_PTE);
kva_target_pfn = round_down(max_low_pfn - kva_pages, PTRS_PER_PTE);
do {
* we have now. "break" is either changing perms, levels or
* address space marker.
*/
- prot = pgprot_val(new_prot) & ~(PTE_PFN_MASK);
- cur = pgprot_val(st->current_prot) & ~(PTE_PFN_MASK);
+ prot = pgprot_val(new_prot) & PTE_FLAGS_MASK;
+ cur = pgprot_val(st->current_prot) & PTE_FLAGS_MASK;
if (!st->level) {
/* First entry */
#include <asm/tlbflush.h>
#include <asm/proto.h>
#include <asm-generic/sections.h>
+#include <asm/traps.h>
/*
* Page fault error code bits
return 0;
}
-void do_invalid_op(struct pt_regs *, unsigned long);
-
static int is_f00f_bug(struct pt_regs *regs, unsigned long address)
{
#ifdef CONFIG_X86_F00F_BUG
#include <asm/paravirt.h>
#include <asm/setup.h>
#include <asm/cacheflush.h>
+#include <asm/smp.h>
unsigned int __VMALLOC_RESERVE = 128 << 20;
{
pgd_t *pgd_base = swapper_pg_dir;
- paravirt_pagetable_setup_start(pgd_base);
-
permanent_kmaps_init(pgd_base);
-
- paravirt_pagetable_setup_done(pgd_base);
}
#ifdef CONFIG_ACPI_SLEEP
void __init cleanup_highmap(void)
{
unsigned long vaddr = __START_KERNEL_map;
- unsigned long end = round_up((unsigned long)_end, PMD_SIZE) - 1;
+ unsigned long end = roundup((unsigned long)_end, PMD_SIZE) - 1;
pmd_t *pmd = level2_kernel_pgt;
pmd_t *last_pmd = pmd + PTRS_PER_PMD;
unsigned long puds, pmds, ptes, tables, start;
puds = (end + PUD_SIZE - 1) >> PUD_SHIFT;
- tables = round_up(puds * sizeof(pud_t), PAGE_SIZE);
+ tables = roundup(puds * sizeof(pud_t), PAGE_SIZE);
if (direct_gbpages) {
unsigned long extra;
extra = end - ((end>>PUD_SHIFT) << PUD_SHIFT);
pmds = (extra + PMD_SIZE - 1) >> PMD_SHIFT;
} else
pmds = (end + PMD_SIZE - 1) >> PMD_SHIFT;
- tables += round_up(pmds * sizeof(pmd_t), PAGE_SIZE);
+ tables += roundup(pmds * sizeof(pmd_t), PAGE_SIZE);
if (cpu_has_pse) {
unsigned long extra;
ptes = (extra + PAGE_SIZE - 1) >> PAGE_SHIFT;
} else
ptes = (end + PAGE_SIZE - 1) >> PAGE_SHIFT;
- tables += round_up(ptes * sizeof(pte_t), PAGE_SIZE);
+ tables += roundup(ptes * sizeof(pte_t), PAGE_SIZE);
/*
* RED-PEN putting page tables only on node 0 could
return;
}
-int __initdata early_ioremap_debug;
+static int __initdata early_ioremap_debug;
static int __init early_ioremap_debug_setup(char *str)
{
}
-int __initdata early_ioremap_nested;
+static int __initdata early_ioremap_nested;
static int __init check_early_ioremap_leak(void)
{
return 0;
addr = 0x8000;
- nodemap_size = round_up(sizeof(s16) * memnodemapsize, L1_CACHE_BYTES);
+ nodemap_size = roundup(sizeof(s16) * memnodemapsize, L1_CACHE_BYTES);
nodemap_addr = find_e820_area(addr, max_pfn<<PAGE_SHIFT,
nodemap_size, L1_CACHE_BYTES);
if (nodemap_addr == -1UL) {
unsigned long start_pfn, last_pfn, bootmap_pages, bootmap_size;
unsigned long bootmap_start, nodedata_phys;
void *bootmap;
- const int pgdat_size = round_up(sizeof(pg_data_t), PAGE_SIZE);
+ const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
int nid;
- start = round_up(start, ZONE_ALIGN);
+ start = roundup(start, ZONE_ALIGN);
printk(KERN_INFO "Bootmem setup node %d %016lx-%016lx\n", nodeid,
start, end);
bootmap_pages = bootmem_bootmap_pages(last_pfn - start_pfn);
nid = phys_to_nid(nodedata_phys);
if (nid == nodeid)
- bootmap_start = round_up(nodedata_phys + pgdat_size, PAGE_SIZE);
+ bootmap_start = roundup(nodedata_phys + pgdat_size, PAGE_SIZE);
else
- bootmap_start = round_up(start, PAGE_SIZE);
+ bootmap_start = roundup(start, PAGE_SIZE);
/*
* SMP_CACHE_BYTES could be enough, but init_bootmem_node like
* to use that to align to PAGE_SIZE
static inline unsigned long highmap_end_pfn(void)
{
- return __pa(round_up((unsigned long)_end, PMD_SIZE)) >> PAGE_SHIFT;
+ return __pa(roundup((unsigned long)_end, PMD_SIZE)) >> PAGE_SHIFT;
}
#endif
{
return change_page_attr_clear(addr, numpages, __pgprot(_PAGE_RW));
}
+EXPORT_SYMBOL_GPL(set_memory_ro);
int set_memory_rw(unsigned long addr, int numpages)
{
return change_page_attr_set(addr, numpages, __pgprot(_PAGE_RW));
}
+EXPORT_SYMBOL_GPL(set_memory_rw);
int set_memory_np(unsigned long addr, int numpages)
{
#define UNSHARED_PTRS_PER_PGD \
(SHARED_KERNEL_PMD ? KERNEL_PGD_BOUNDARY : PTRS_PER_PGD)
-static void pgd_ctor(void *p)
+static void pgd_ctor(pgd_t *pgd)
{
- pgd_t *pgd = p;
-
/* If the pgd points to a shared pagetable level (either the
ptes in non-PAE, or shared PMD in PAE), then just copy the
references from swapper_pg_dir. */
pgd_list_add(pgd);
}
-static void pgd_dtor(void *pgd)
+static void pgd_dtor(pgd_t *pgd)
{
unsigned long flags; /* can be called from interrupt context */
if (!arg)
return -EINVAL;
- __VMALLOC_RESERVE = memparse(arg, &arg);
+ /* Add VMALLOC_OFFSET to the parsed value due to vm area guard hole*/
+ __VMALLOC_RESERVE = memparse(arg, &arg) + VMALLOC_OFFSET;
return 0;
}
early_param("vmalloc", parse_vmalloc);
static void nmi_shutdown(void)
{
- struct op_msrs *msrs = &get_cpu_var(cpu_msrs);
+ struct op_msrs *msrs;
+
nmi_enabled = 0;
on_each_cpu(nmi_cpu_shutdown, NULL, 1);
unregister_die_notifier(&profile_exceptions_nb);
+ msrs = &get_cpu_var(cpu_msrs);
model->shutdown(msrs);
free_msrs();
put_cpu_var(cpu_msrs);
#include <linux/oprofile.h>
#include <linux/smp.h>
+#include <linux/ptrace.h>
+#include <linux/nmi.h>
#include <asm/msr.h>
-#include <asm/ptrace.h>
#include <asm/fixmap.h>
#include <asm/apic.h>
-#include <asm/nmi.h>
+
#include "op_x86_model.h"
#include "op_counter.h"
static inline void setup_num_counters(void)
{
#ifdef CONFIG_SMP
- if (smp_num_siblings == 2){
+ if (smp_num_siblings == 2) {
num_counters = NUM_COUNTERS_HT2;
num_controls = NUM_CONTROLS_HT2;
}
#define CTR_FLAME_2 (1 << 6)
#define CTR_IQ_5 (1 << 7)
-static struct p4_counter_binding p4_counters [NUM_COUNTERS_NON_HT] = {
+static struct p4_counter_binding p4_counters[NUM_COUNTERS_NON_HT] = {
{ CTR_BPU_0, MSR_P4_BPU_PERFCTR0, MSR_P4_BPU_CCCR0 },
{ CTR_MS_0, MSR_P4_MS_PERFCTR0, MSR_P4_MS_CCCR0 },
{ CTR_FLAME_0, MSR_P4_FLAME_PERFCTR0, MSR_P4_FLAME_CCCR0 },
{ CTR_IQ_5, MSR_P4_IQ_PERFCTR5, MSR_P4_IQ_CCCR5 }
};
-#define NUM_UNUSED_CCCRS NUM_CCCRS_NON_HT - NUM_COUNTERS_NON_HT
+#define NUM_UNUSED_CCCRS (NUM_CCCRS_NON_HT - NUM_COUNTERS_NON_HT)
/* p4 event codes in libop/op_event.h are indices into this table. */
static struct p4_event_binding p4_events[NUM_EVENTS] = {
-
+
{ /* BRANCH_RETIRED */
- 0x05, 0x06,
+ 0x05, 0x06,
{ {CTR_IQ_4, MSR_P4_CRU_ESCR2},
{CTR_IQ_5, MSR_P4_CRU_ESCR3} }
},
-
+
{ /* MISPRED_BRANCH_RETIRED */
- 0x04, 0x03,
+ 0x04, 0x03,
{ { CTR_IQ_4, MSR_P4_CRU_ESCR0},
{ CTR_IQ_5, MSR_P4_CRU_ESCR1} }
},
-
+
{ /* TC_DELIVER_MODE */
0x01, 0x01,
- { { CTR_MS_0, MSR_P4_TC_ESCR0},
+ { { CTR_MS_0, MSR_P4_TC_ESCR0},
{ CTR_MS_2, MSR_P4_TC_ESCR1} }
},
-
+
{ /* BPU_FETCH_REQUEST */
- 0x00, 0x03,
+ 0x00, 0x03,
{ { CTR_BPU_0, MSR_P4_BPU_ESCR0},
{ CTR_BPU_2, MSR_P4_BPU_ESCR1} }
},
},
{ /* LOAD_PORT_REPLAY */
- 0x02, 0x04,
+ 0x02, 0x04,
{ { CTR_FLAME_0, MSR_P4_SAAT_ESCR0},
{ CTR_FLAME_2, MSR_P4_SAAT_ESCR1} }
},
},
{ /* BSQ_CACHE_REFERENCE */
- 0x07, 0x0c,
+ 0x07, 0x0c,
{ { CTR_BPU_0, MSR_P4_BSU_ESCR0},
{ CTR_BPU_2, MSR_P4_BSU_ESCR1} }
},
{ /* IOQ_ALLOCATION */
- 0x06, 0x03,
+ 0x06, 0x03,
{ { CTR_BPU_0, MSR_P4_FSB_ESCR0},
{ 0, 0 } }
},
{ /* IOQ_ACTIVE_ENTRIES */
- 0x06, 0x1a,
+ 0x06, 0x1a,
{ { CTR_BPU_2, MSR_P4_FSB_ESCR1},
{ 0, 0 } }
},
{ /* FSB_DATA_ACTIVITY */
- 0x06, 0x17,
+ 0x06, 0x17,
{ { CTR_BPU_0, MSR_P4_FSB_ESCR0},
{ CTR_BPU_2, MSR_P4_FSB_ESCR1} }
},
{ /* BSQ_ALLOCATION */
- 0x07, 0x05,
+ 0x07, 0x05,
{ { CTR_BPU_0, MSR_P4_BSU_ESCR0},
{ 0, 0 } }
},
{ /* BSQ_ACTIVE_ENTRIES */
0x07, 0x06,
- { { CTR_BPU_2, MSR_P4_BSU_ESCR1 /* guess */},
+ { { CTR_BPU_2, MSR_P4_BSU_ESCR1 /* guess */},
{ 0, 0 } }
},
{ /* X87_ASSIST */
- 0x05, 0x03,
+ 0x05, 0x03,
{ { CTR_IQ_4, MSR_P4_CRU_ESCR2},
{ CTR_IQ_5, MSR_P4_CRU_ESCR3} }
},
{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
{ CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
},
-
+
{ /* PACKED_SP_UOP */
- 0x01, 0x08,
+ 0x01, 0x08,
{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
{ CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
},
-
+
{ /* PACKED_DP_UOP */
- 0x01, 0x0c,
+ 0x01, 0x0c,
{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
{ CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
},
{ /* SCALAR_SP_UOP */
- 0x01, 0x0a,
+ 0x01, 0x0a,
{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
{ CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
},
},
{ /* 64BIT_MMX_UOP */
- 0x01, 0x02,
+ 0x01, 0x02,
{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
{ CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
},
-
+
{ /* 128BIT_MMX_UOP */
- 0x01, 0x1a,
+ 0x01, 0x1a,
{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
{ CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
},
{ /* X87_FP_UOP */
- 0x01, 0x04,
+ 0x01, 0x04,
{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
{ CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
},
-
+
{ /* X87_SIMD_MOVES_UOP */
- 0x01, 0x2e,
+ 0x01, 0x2e,
{ { CTR_FLAME_0, MSR_P4_FIRM_ESCR0},
{ CTR_FLAME_2, MSR_P4_FIRM_ESCR1} }
},
-
+
{ /* MACHINE_CLEAR */
- 0x05, 0x02,
+ 0x05, 0x02,
{ { CTR_IQ_4, MSR_P4_CRU_ESCR2},
{ CTR_IQ_5, MSR_P4_CRU_ESCR3} }
},
{ { CTR_BPU_0, MSR_P4_FSB_ESCR0},
{ CTR_BPU_2, MSR_P4_FSB_ESCR1} }
},
-
+
{ /* TC_MS_XFER */
- 0x00, 0x05,
+ 0x00, 0x05,
{ { CTR_MS_0, MSR_P4_MS_ESCR0},
{ CTR_MS_2, MSR_P4_MS_ESCR1} }
},
},
{ /* INSTR_RETIRED */
- 0x04, 0x02,
+ 0x04, 0x02,
{ { CTR_IQ_4, MSR_P4_CRU_ESCR0},
{ CTR_IQ_5, MSR_P4_CRU_ESCR1} }
},
{ CTR_IQ_5, MSR_P4_CRU_ESCR1} }
},
- { /* UOP_TYPE */
- 0x02, 0x02,
+ { /* UOP_TYPE */
+ 0x02, 0x02,
{ { CTR_IQ_4, MSR_P4_RAT_ESCR0},
{ CTR_IQ_5, MSR_P4_RAT_ESCR1} }
},
{ /* RETIRED_MISPRED_BRANCH_TYPE */
- 0x02, 0x05,
+ 0x02, 0x05,
{ { CTR_MS_0, MSR_P4_TBPU_ESCR0},
{ CTR_MS_2, MSR_P4_TBPU_ESCR1} }
},
#define ESCR_SET_OS_1(escr, os) ((escr) |= (((os) & 1) << 1))
#define ESCR_SET_EVENT_SELECT(escr, sel) ((escr) |= (((sel) & 0x3f) << 25))
#define ESCR_SET_EVENT_MASK(escr, mask) ((escr) |= (((mask) & 0xffff) << 9))
-#define ESCR_READ(escr,high,ev,i) do {rdmsr(ev->bindings[(i)].escr_address, (escr), (high));} while (0)
-#define ESCR_WRITE(escr,high,ev,i) do {wrmsr(ev->bindings[(i)].escr_address, (escr), (high));} while (0)
+#define ESCR_READ(escr, high, ev, i) do {rdmsr(ev->bindings[(i)].escr_address, (escr), (high)); } while (0)
+#define ESCR_WRITE(escr, high, ev, i) do {wrmsr(ev->bindings[(i)].escr_address, (escr), (high)); } while (0)
#define CCCR_RESERVED_BITS 0x38030FFF
#define CCCR_CLEAR(cccr) ((cccr) &= CCCR_RESERVED_BITS)
#define CCCR_SET_PMI_OVF_1(cccr) ((cccr) |= (1<<27))
#define CCCR_SET_ENABLE(cccr) ((cccr) |= (1<<12))
#define CCCR_SET_DISABLE(cccr) ((cccr) &= ~(1<<12))
-#define CCCR_READ(low, high, i) do {rdmsr(p4_counters[(i)].cccr_address, (low), (high));} while (0)
-#define CCCR_WRITE(low, high, i) do {wrmsr(p4_counters[(i)].cccr_address, (low), (high));} while (0)
+#define CCCR_READ(low, high, i) do {rdmsr(p4_counters[(i)].cccr_address, (low), (high)); } while (0)
+#define CCCR_WRITE(low, high, i) do {wrmsr(p4_counters[(i)].cccr_address, (low), (high)); } while (0)
#define CCCR_OVF_P(cccr) ((cccr) & (1U<<31))
#define CCCR_CLEAR_OVF(cccr) ((cccr) &= (~(1U<<31)))
-#define CTRL_IS_RESERVED(msrs,c) (msrs->controls[(c)].addr ? 1 : 0)
-#define CTR_IS_RESERVED(msrs,c) (msrs->counters[(c)].addr ? 1 : 0)
-#define CTR_READ(l,h,i) do {rdmsr(p4_counters[(i)].counter_address, (l), (h));} while (0)
-#define CTR_WRITE(l,i) do {wrmsr(p4_counters[(i)].counter_address, -(u32)(l), -1);} while (0)
+#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
+#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
+#define CTR_READ(l, h, i) do {rdmsr(p4_counters[(i)].counter_address, (l), (h)); } while (0)
+#define CTR_WRITE(l, i) do {wrmsr(p4_counters[(i)].counter_address, -(u32)(l), -1); } while (0)
#define CTR_OVERFLOW_P(ctr) (!((ctr) & 0x80000000))
#ifdef CONFIG_SMP
int cpu = smp_processor_id();
return (cpu != first_cpu(per_cpu(cpu_sibling_map, cpu)));
-#endif
+#endif
return 0;
}
static void p4_fill_in_addresses(struct op_msrs * const msrs)
{
- unsigned int i;
+ unsigned int i;
unsigned int addr, cccraddr, stag;
setup_num_counters();
stag = get_stagger();
/* initialize some registers */
- for (i = 0; i < num_counters; ++i) {
+ for (i = 0; i < num_counters; ++i)
msrs->counters[i].addr = 0;
- }
- for (i = 0; i < num_controls; ++i) {
+ for (i = 0; i < num_controls; ++i)
msrs->controls[i].addr = 0;
- }
-
+
/* the counter & cccr registers we pay attention to */
for (i = 0; i < num_counters; ++i) {
addr = p4_counters[VIRT_CTR(stag, i)].counter_address;
cccraddr = p4_counters[VIRT_CTR(stag, i)].cccr_address;
- if (reserve_perfctr_nmi(addr)){
+ if (reserve_perfctr_nmi(addr)) {
msrs->counters[i].addr = addr;
msrs->controls[i].addr = cccraddr;
}
if (reserve_evntsel_nmi(addr))
msrs->controls[i].addr = addr;
}
-
+
for (addr = MSR_P4_MS_ESCR0 + stag;
- addr <= MSR_P4_TC_ESCR1; ++i, addr += addr_increment()) {
+ addr <= MSR_P4_TC_ESCR1; ++i, addr += addr_increment()) {
if (reserve_evntsel_nmi(addr))
msrs->controls[i].addr = addr;
}
-
+
for (addr = MSR_P4_IX_ESCR0 + stag;
- addr <= MSR_P4_CRU_ESCR3; ++i, addr += addr_increment()) {
+ addr <= MSR_P4_CRU_ESCR3; ++i, addr += addr_increment()) {
if (reserve_evntsel_nmi(addr))
msrs->controls[i].addr = addr;
}
/* there are 2 remaining non-contiguously located ESCRs */
- if (num_counters == NUM_COUNTERS_NON_HT) {
+ if (num_counters == NUM_COUNTERS_NON_HT) {
/* standard non-HT CPUs handle both remaining ESCRs*/
if (reserve_evntsel_nmi(MSR_P4_CRU_ESCR5))
msrs->controls[i++].addr = MSR_P4_CRU_ESCR5;
unsigned int stag;
stag = get_stagger();
-
+
/* convert from counter *number* to counter *bit* */
counter_bit = 1 << VIRT_CTR(stag, ctr);
-
+
/* find our event binding structure. */
if (counter_config[ctr].event <= 0 || counter_config[ctr].event > NUM_EVENTS) {
- printk(KERN_ERR
- "oprofile: P4 event code 0x%lx out of range\n",
+ printk(KERN_ERR
+ "oprofile: P4 event code 0x%lx out of range\n",
counter_config[ctr].event);
return;
}
-
+
ev = &(p4_events[counter_config[ctr].event - 1]);
-
+
for (i = 0; i < maxbind; i++) {
if (ev->bindings[i].virt_counter & counter_bit) {
ESCR_SET_OS_1(escr, counter_config[ctr].kernel);
}
ESCR_SET_EVENT_SELECT(escr, ev->event_select);
- ESCR_SET_EVENT_MASK(escr, counter_config[ctr].unit_mask);
+ ESCR_SET_EVENT_MASK(escr, counter_config[ctr].unit_mask);
ESCR_WRITE(escr, high, ev, i);
-
+
/* modify CCCR */
CCCR_READ(cccr, high, VIRT_CTR(stag, ctr));
CCCR_CLEAR(cccr);
CCCR_SET_REQUIRED_BITS(cccr);
CCCR_SET_ESCR_SELECT(cccr, ev->escr_select);
- if (stag == 0) {
+ if (stag == 0)
CCCR_SET_PMI_OVF_0(cccr);
- } else {
+ else
CCCR_SET_PMI_OVF_1(cccr);
- }
CCCR_WRITE(cccr, high, VIRT_CTR(stag, ctr));
return;
}
}
- printk(KERN_ERR
+ printk(KERN_ERR
"oprofile: P4 event code 0x%lx no binding, stag %d ctr %d\n",
counter_config[ctr].event, stag, ctr);
}
stag = get_stagger();
rdmsr(MSR_IA32_MISC_ENABLE, low, high);
- if (! MISC_PMC_ENABLED_P(low)) {
+ if (!MISC_PMC_ENABLED_P(low)) {
printk(KERN_ERR "oprofile: P4 PMC not available\n");
return;
}
/* clear the cccrs we will use */
for (i = 0 ; i < num_counters ; i++) {
- if (unlikely(!CTRL_IS_RESERVED(msrs,i)))
+ if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
continue;
rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
CCCR_CLEAR(low);
/* clear all escrs (including those outside our concern) */
for (i = num_counters; i < num_controls; i++) {
- if (unlikely(!CTRL_IS_RESERVED(msrs,i)))
+ if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
continue;
wrmsr(msrs->controls[i].addr, 0, 0);
}
/* setup all counters */
for (i = 0 ; i < num_counters ; ++i) {
- if ((counter_config[i].enabled) && (CTRL_IS_RESERVED(msrs,i))) {
+ if ((counter_config[i].enabled) && (CTRL_IS_RESERVED(msrs, i))) {
reset_value[i] = counter_config[i].count;
pmc_setup_one_p4_counter(i);
CTR_WRITE(counter_config[i].count, VIRT_CTR(stag, i));
stag = get_stagger();
for (i = 0; i < num_counters; ++i) {
-
- if (!reset_value[i])
+
+ if (!reset_value[i])
continue;
- /*
+ /*
* there is some eccentricity in the hardware which
* requires that we perform 2 extra corrections:
*
*
* - write the counter back twice to ensure it gets
* updated properly.
- *
+ *
* the former seems to be related to extra NMIs happening
* during the current NMI; the latter is reported as errata
* N15 in intel doc 249199-029, pentium 4 specification
* update, though their suggested work-around does not
* appear to solve the problem.
*/
-
+
real = VIRT_CTR(stag, i);
CCCR_READ(low, high, real);
- CTR_READ(ctr, high, real);
+ CTR_READ(ctr, high, real);
if (CCCR_OVF_P(low) || CTR_OVERFLOW_P(ctr)) {
oprofile_add_sample(regs, i);
- CTR_WRITE(reset_value[i], real);
+ CTR_WRITE(reset_value[i], real);
CCCR_CLEAR_OVF(low);
CCCR_WRITE(low, high, real);
- CTR_WRITE(reset_value[i], real);
+ CTR_WRITE(reset_value[i], real);
}
}
int i;
for (i = 0 ; i < num_counters ; ++i) {
- if (CTR_IS_RESERVED(msrs,i))
+ if (CTR_IS_RESERVED(msrs, i))
release_perfctr_nmi(msrs->counters[i].addr);
}
- /* some of the control registers are specially reserved in
+ /*
+ * some of the control registers are specially reserved in
* conjunction with the counter registers (hence the starting offset).
* This saves a few bits.
*/
for (i = num_counters ; i < num_controls ; ++i) {
- if (CTRL_IS_RESERVED(msrs,i))
+ if (CTRL_IS_RESERVED(msrs, i))
release_evntsel_nmi(msrs->controls[i].addr);
}
}
unsigned long action, void *hcpu)
{
int cpu = (long)hcpu;
- switch(action) {
+ switch (action) {
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
smp_call_function_single(cpu, enable_pci_io_ecs, NULL, 0);
#include <linux/ioport.h>
#include <linux/errno.h>
#include <linux/bootmem.h>
-#include <linux/acpi.h>
#include <asm/pat.h>
-#include <asm/hpet.h>
-#include <asm/io_apic.h>
#include "pci.h"
}
EXPORT_SYMBOL(pcibios_align_resource);
-static int check_res_with_valid(struct pci_dev *dev, struct resource *res)
-{
- unsigned long base;
- unsigned long size;
- int i;
-
- base = res->start;
- size = (res->start == 0 && res->end == res->start) ? 0 :
- (res->end - res->start + 1);
-
- if (!base || !size)
- return 0;
-
-#ifdef CONFIG_HPET_TIMER
- /* for hpet */
- if (base == hpet_address && (res->flags & IORESOURCE_MEM)) {
- dev_info(&dev->dev, "BAR has HPET at %08lx-%08lx\n",
- base, base + size - 1);
- return 1;
- }
-#endif
-
-#ifdef CONFIG_X86_IO_APIC
- for (i = 0; i < nr_ioapics; i++) {
- unsigned long ioapic_phys = mp_ioapics[i].mp_apicaddr;
-
- if (base == ioapic_phys && (res->flags & IORESOURCE_MEM)) {
- dev_info(&dev->dev, "BAR has ioapic at %08lx-%08lx\n",
- base, base + size - 1);
- return 1;
- }
- }
-#endif
-
-#ifdef CONFIG_PCI_MMCONFIG
- for (i = 0; i < pci_mmcfg_config_num; i++) {
- unsigned long addr;
-
- addr = pci_mmcfg_config[i].address;
- if (base == addr && (res->flags & IORESOURCE_MEM)) {
- dev_info(&dev->dev, "BAR has MMCONFIG at %08lx-%08lx\n",
- base, base + size - 1);
- return 1;
- }
- }
-#endif
-
- return 0;
-}
-
-static int check_platform(struct pci_dev *dev, struct resource *res)
-{
- struct resource *root = NULL;
-
- /*
- * forcibly insert it into the
- * resource tree
- */
- if (res->flags & IORESOURCE_MEM)
- root = &iomem_resource;
- else if (res->flags & IORESOURCE_IO)
- root = &ioport_resource;
-
- if (root && check_res_with_valid(dev, res)) {
- insert_resource(root, res);
-
- return 1;
- }
-
- return 0;
-}
/*
* Handle resources of PCI devices. If the world were perfect, we could
* just allocate all the resource regions and do nothing more. It isn't.
pr = pci_find_parent_resource(dev, r);
if (!r->start || !pr ||
request_resource(pr, r) < 0) {
- if (check_platform(dev, r))
- continue;
- dev_err(&dev->dev, "BAR %d: can't "
- "allocate resource\n", idx);
+ dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx);
/*
* Something is wrong with the region.
* Invalidate the resource to prevent
else
disabled = !(command & PCI_COMMAND_MEMORY);
if (pass == disabled) {
- dev_dbg(&dev->dev, "resource %#08llx-%#08llx "
- "(f=%lx, d=%d, p=%d)\n",
+ dev_dbg(&dev->dev, "resource %#08llx-%#08llx (f=%lx, d=%d, p=%d)\n",
(unsigned long long) r->start,
(unsigned long long) r->end,
r->flags, disabled, pass);
pr = pci_find_parent_resource(dev, r);
if (!pr || request_resource(pr, r) < 0) {
- if (check_platform(dev, r))
- continue;
- dev_err(&dev->dev, "BAR %d: can't "
- "allocate resource\n", idx);
+ dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx);
/* We'll assign a new address later */
r->end -= r->start;
r->start = 0;
if (io_apic_assign_pci_irqs) {
int irq;
- if (pin) {
- /*
- * interrupt pins are numbered starting
- * from 1
- */
- pin--;
- irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
- PCI_SLOT(dev->devfn), pin);
- /*
- * Busses behind bridges are typically not listed in the MP-table.
- * In this case we have to look up the IRQ based on the parent bus,
- * parent slot, and pin number. The SMP code detects such bridged
- * busses itself so we should get into this branch reliably.
- */
- if (irq < 0 && dev->bus->parent) { /* go back to the bridge */
- struct pci_dev *bridge = dev->bus->self;
-
- pin = (pin + PCI_SLOT(dev->devfn)) % 4;
- irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
- PCI_SLOT(bridge->devfn), pin);
- if (irq >= 0)
- dev_warn(&dev->dev, "using bridge %s INT %c to get IRQ %d\n",
- pci_name(bridge),
- 'A' + pin, irq);
- }
- if (irq >= 0) {
- dev_info(&dev->dev, "PCI->APIC IRQ transform: INT %c -> IRQ %d\n", 'A' + pin, irq);
- dev->irq = irq;
- }
+ if (!pin)
+ continue;
+
+ /*
+ * interrupt pins are numbered starting from 1
+ */
+ pin--;
+ irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
+ PCI_SLOT(dev->devfn), pin);
+ /*
+ * Busses behind bridges are typically not listed in the
+ * MP-table. In this case we have to look up the IRQ
+ * based on the parent bus, parent slot, and pin number.
+ * The SMP code detects such bridged busses itself so we
+ * should get into this branch reliably.
+ */
+ if (irq < 0 && dev->bus->parent) {
+ /* go back to the bridge */
+ struct pci_dev *bridge = dev->bus->self;
+ int bus;
+
+ pin = (pin + PCI_SLOT(dev->devfn)) % 4;
+ bus = bridge->bus->number;
+ irq = IO_APIC_get_PCI_irq_vector(bus,
+ PCI_SLOT(bridge->devfn), pin);
+ if (irq >= 0)
+ dev_warn(&dev->dev,
+ "using bridge %s INT %c to "
+ "get IRQ %d\n",
+ pci_name(bridge),
+ 'A' + pin, irq);
+ }
+ if (irq >= 0) {
+ dev_info(&dev->dev,
+ "PCI->APIC IRQ transform: INT %c "
+ "-> IRQ %d\n",
+ 'A' + pin, irq);
+ dev->irq = irq;
}
}
#endif
-.text
-
/*
* This may not use any stack, nor any variable that is not "NoSave":
*
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/asm-offsets.h>
+#include <asm/processor-flags.h>
- .text
+.text
ENTRY(swsusp_arch_suspend)
-
movl %esp, saved_context_esp
movl %ebx, saved_context_ebx
movl %ebp, saved_context_ebp
movl %esi, saved_context_esi
movl %edi, saved_context_edi
- pushfl ; popl saved_context_eflags
+ pushfl
+ popl saved_context_eflags
call swsusp_save
ret
movl mmu_cr4_features, %ecx
jecxz 1f # cr4 Pentium and higher, skip if zero
movl %ecx, %edx
- andl $~(1<<7), %edx; # PGE
+ andl $~(X86_CR4_PGE), %edx
movl %edx, %cr4; # turn off PGE
1:
movl %cr3, %eax; # flush TLB
movl saved_context_esi, %esi
movl saved_context_edi, %edi
- pushl saved_context_eflags ; popfl
+ pushl saved_context_eflags
+ popfl
xorl %eax, %eax
/* Early in boot, while setting up the initial pagetable, assume
everything is pinned. */
-static __init void xen_alloc_pte_init(struct mm_struct *mm, u32 pfn)
+static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn)
{
#ifdef CONFIG_FLATMEM
BUG_ON(mem_map); /* should only be used early */
/* Early release_pte assumes that all pts are pinned, since there's
only init_mm and anything attached to that is pinned. */
-static void xen_release_pte_init(u32 pfn)
+static void xen_release_pte_init(unsigned long pfn)
{
make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
}
/* This needs to make sure the new pte page is pinned iff its being
attached to a pinned pagetable. */
-static void xen_alloc_ptpage(struct mm_struct *mm, u32 pfn, unsigned level)
+static void xen_alloc_ptpage(struct mm_struct *mm, unsigned long pfn, unsigned level)
{
struct page *page = pfn_to_page(pfn);
}
}
-static void xen_alloc_pte(struct mm_struct *mm, u32 pfn)
+static void xen_alloc_pte(struct mm_struct *mm, unsigned long pfn)
{
xen_alloc_ptpage(mm, pfn, PT_PTE);
}
-static void xen_alloc_pmd(struct mm_struct *mm, u32 pfn)
+static void xen_alloc_pmd(struct mm_struct *mm, unsigned long pfn)
{
xen_alloc_ptpage(mm, pfn, PT_PMD);
}
}
/* This should never happen until we're OK to use struct page */
-static void xen_release_ptpage(u32 pfn, unsigned level)
+static void xen_release_ptpage(unsigned long pfn, unsigned level)
{
struct page *page = pfn_to_page(pfn);
}
}
-static void xen_release_pte(u32 pfn)
+static void xen_release_pte(unsigned long pfn)
{
xen_release_ptpage(pfn, PT_PTE);
}
-static void xen_release_pmd(u32 pfn)
+static void xen_release_pmd(unsigned long pfn)
{
xen_release_ptpage(pfn, PT_PMD);
}
#if PAGETABLE_LEVELS == 4
-static void xen_alloc_pud(struct mm_struct *mm, u32 pfn)
+static void xen_alloc_pud(struct mm_struct *mm, unsigned long pfn)
{
xen_alloc_ptpage(mm, pfn, PT_PUD);
}
-static void xen_release_pud(u32 pfn)
+static void xen_release_pud(unsigned long pfn)
{
xen_release_ptpage(pfn, PT_PUD);
}
.ptep_modify_prot_commit = __ptep_modify_prot_commit,
.pte_val = xen_pte_val,
- .pte_flags = native_pte_val,
+ .pte_flags = native_pte_flags,
.pgd_val = xen_pgd_val,
.make_pte = xen_make_pte,
e820.nr_map = 0;
- e820_add_region(0, PFN_PHYS(max_pfn), E820_RAM);
+ e820_add_region(0, PFN_PHYS((u64)max_pfn), E820_RAM);
/*
* Even though this is normal, usable memory under Xen, reserve
}
EXPORT_SYMBOL(blk_verify_command);
+#if 0
/* and now, the sysfs stuff */
static ssize_t rcf_cmds_show(struct blk_cmd_filter *filter, char *page,
int rw)
return 0;
}
+EXPORT_SYMBOL(blk_register_filter);
void blk_unregister_filter(struct gendisk *disk)
{
kobject_put(&filter->kobj);
kobject_put(disk->holder_dir->parent);
}
-
+EXPORT_SYMBOL(blk_unregister_filter);
+#endif
disk->minors, NULL, exact_match, exact_lock, disk);
register_disk(disk);
blk_register_queue(disk);
- blk_register_filter(disk);
bdi = &disk->queue->backing_dev_info;
bdi_register_dev(bdi, MKDEV(disk->major, disk->first_minor));
void unlink_gendisk(struct gendisk *disk)
{
- blk_unregister_filter(disk);
sysfs_remove_link(&disk->dev.kobj, "bdi");
bdi_unregister(&disk->queue->backing_dev_info);
blk_unregister_queue(disk);
loff_t k = *pos;
if (!k)
- seq_puts(part, "major minor #blocks name\n\n");
+ part->private = (void *)1LU; /* tell show to print header */
mutex_lock(&block_class_lock);
dev = class_find_device(&block_class, NULL, &k, find_start);
int n;
char buf[BDEVNAME_SIZE];
+ /*
+ * Print header if start told us to do. This is to preserve
+ * the original behavior of not printing header if no
+ * partition exists. This hackery will be removed later with
+ * class iteration clean up.
+ */
+ if (part->private) {
+ seq_puts(part, "major minor #blocks name\n\n");
+ part->private = NULL;
+ }
+
/* Don't show non-partitionable removeable devices or empty devices */
if (!get_capacity(sgp) ||
(sgp->minors == 1 && (sgp->flags & GENHD_FL_REMOVABLE)))
spin_lock_bh(&next->lock);
next->parent = NULL;
_next = next->next;
- next->next = NULL;
+ if (_next && _next->chan == chan)
+ next->next = NULL;
spin_unlock_bh(&next->lock);
next->tx_submit(next);
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/bitops.h>
-#include <asm/unaligned.h>
static const u32 camellia_sp1110[256] = {
0x70707000,0x82828200,0x2c2c2c00,0xececec00,
/*
* macros
*/
+#define GETU32(v, pt) \
+ do { \
+ /* latest breed of gcc is clever enough to use move */ \
+ memcpy(&(v), (pt), 4); \
+ (v) = be32_to_cpu(v); \
+ } while(0)
+
+/* rotation right shift 1byte */
+#define ROR8(x) (((x) >> 8) + ((x) << 24))
+/* rotation left shift 1bit */
+#define ROL1(x) (((x) << 1) + ((x) >> 31))
+/* rotation left shift 1byte */
+#define ROL8(x) (((x) << 8) + ((x) >> 24))
+
#define ROLDQ(ll, lr, rl, rr, w0, w1, bits) \
do { \
w0 = ll; \
^ camellia_sp3033[(u8)(il >> 8)] \
^ camellia_sp4404[(u8)(il )]; \
yl ^= yr; \
- yr = ror32(yr, 8); \
+ yr = ROR8(yr); \
yr ^= yl; \
} while(0)
subL[7] ^= subL[1]; subR[7] ^= subR[1];
subL[1] ^= subR[1] & ~subR[9];
dw = subL[1] & subL[9],
- subR[1] ^= rol32(dw, 1); /* modified for FLinv(kl2) */
+ subR[1] ^= ROL1(dw); /* modified for FLinv(kl2) */
/* round 8 */
subL[11] ^= subL[1]; subR[11] ^= subR[1];
/* round 10 */
subL[15] ^= subL[1]; subR[15] ^= subR[1];
subL[1] ^= subR[1] & ~subR[17];
dw = subL[1] & subL[17],
- subR[1] ^= rol32(dw, 1); /* modified for FLinv(kl4) */
+ subR[1] ^= ROL1(dw); /* modified for FLinv(kl4) */
/* round 14 */
subL[19] ^= subL[1]; subR[19] ^= subR[1];
/* round 16 */
} else {
subL[1] ^= subR[1] & ~subR[25];
dw = subL[1] & subL[25],
- subR[1] ^= rol32(dw, 1); /* modified for FLinv(kl6) */
+ subR[1] ^= ROL1(dw); /* modified for FLinv(kl6) */
/* round 20 */
subL[27] ^= subL[1]; subR[27] ^= subR[1];
/* round 22 */
subL[26] ^= kw4l; subR[26] ^= kw4r;
kw4l ^= kw4r & ~subR[24];
dw = kw4l & subL[24],
- kw4r ^= rol32(dw, 1); /* modified for FL(kl5) */
+ kw4r ^= ROL1(dw); /* modified for FL(kl5) */
}
/* round 17 */
subL[22] ^= kw4l; subR[22] ^= kw4r;
subL[18] ^= kw4l; subR[18] ^= kw4r;
kw4l ^= kw4r & ~subR[16];
dw = kw4l & subL[16],
- kw4r ^= rol32(dw, 1); /* modified for FL(kl3) */
+ kw4r ^= ROL1(dw); /* modified for FL(kl3) */
/* round 11 */
subL[14] ^= kw4l; subR[14] ^= kw4r;
/* round 9 */
subL[10] ^= kw4l; subR[10] ^= kw4r;
kw4l ^= kw4r & ~subR[8];
dw = kw4l & subL[8],
- kw4r ^= rol32(dw, 1); /* modified for FL(kl1) */
+ kw4r ^= ROL1(dw); /* modified for FL(kl1) */
/* round 5 */
subL[6] ^= kw4l; subR[6] ^= kw4r;
/* round 3 */
SUBKEY_R(6) = subR[5] ^ subR[7];
tl = subL[10] ^ (subR[10] & ~subR[8]);
dw = tl & subL[8], /* FL(kl1) */
- tr = subR[10] ^ rol32(dw, 1);
+ tr = subR[10] ^ ROL1(dw);
SUBKEY_L(7) = subL[6] ^ tl; /* round 6 */
SUBKEY_R(7) = subR[6] ^ tr;
SUBKEY_L(8) = subL[8]; /* FL(kl1) */
SUBKEY_R(9) = subR[9];
tl = subL[7] ^ (subR[7] & ~subR[9]);
dw = tl & subL[9], /* FLinv(kl2) */
- tr = subR[7] ^ rol32(dw, 1);
+ tr = subR[7] ^ ROL1(dw);
SUBKEY_L(10) = tl ^ subL[11]; /* round 7 */
SUBKEY_R(10) = tr ^ subR[11];
SUBKEY_L(11) = subL[10] ^ subL[12]; /* round 8 */
SUBKEY_R(14) = subR[13] ^ subR[15];
tl = subL[18] ^ (subR[18] & ~subR[16]);
dw = tl & subL[16], /* FL(kl3) */
- tr = subR[18] ^ rol32(dw, 1);
+ tr = subR[18] ^ ROL1(dw);
SUBKEY_L(15) = subL[14] ^ tl; /* round 12 */
SUBKEY_R(15) = subR[14] ^ tr;
SUBKEY_L(16) = subL[16]; /* FL(kl3) */
SUBKEY_R(17) = subR[17];
tl = subL[15] ^ (subR[15] & ~subR[17]);
dw = tl & subL[17], /* FLinv(kl4) */
- tr = subR[15] ^ rol32(dw, 1);
+ tr = subR[15] ^ ROL1(dw);
SUBKEY_L(18) = tl ^ subL[19]; /* round 13 */
SUBKEY_R(18) = tr ^ subR[19];
SUBKEY_L(19) = subL[18] ^ subL[20]; /* round 14 */
} else {
tl = subL[26] ^ (subR[26] & ~subR[24]);
dw = tl & subL[24], /* FL(kl5) */
- tr = subR[26] ^ rol32(dw, 1);
+ tr = subR[26] ^ ROL1(dw);
SUBKEY_L(23) = subL[22] ^ tl; /* round 18 */
SUBKEY_R(23) = subR[22] ^ tr;
SUBKEY_L(24) = subL[24]; /* FL(kl5) */
SUBKEY_R(25) = subR[25];
tl = subL[23] ^ (subR[23] & ~subR[25]);
dw = tl & subL[25], /* FLinv(kl6) */
- tr = subR[23] ^ rol32(dw, 1);
+ tr = subR[23] ^ ROL1(dw);
SUBKEY_L(26) = tl ^ subL[27]; /* round 19 */
SUBKEY_R(26) = tr ^ subR[27];
SUBKEY_L(27) = subL[26] ^ subL[28]; /* round 20 */
/* apply the inverse of the last half of P-function */
i = 2;
do {
- dw = SUBKEY_L(i + 0) ^ SUBKEY_R(i + 0); dw = rol32(dw, 8);/* round 1 */
+ dw = SUBKEY_L(i + 0) ^ SUBKEY_R(i + 0); dw = ROL8(dw);/* round 1 */
SUBKEY_R(i + 0) = SUBKEY_L(i + 0) ^ dw; SUBKEY_L(i + 0) = dw;
- dw = SUBKEY_L(i + 1) ^ SUBKEY_R(i + 1); dw = rol32(dw, 8);/* round 2 */
+ dw = SUBKEY_L(i + 1) ^ SUBKEY_R(i + 1); dw = ROL8(dw);/* round 2 */
SUBKEY_R(i + 1) = SUBKEY_L(i + 1) ^ dw; SUBKEY_L(i + 1) = dw;
- dw = SUBKEY_L(i + 2) ^ SUBKEY_R(i + 2); dw = rol32(dw, 8);/* round 3 */
+ dw = SUBKEY_L(i + 2) ^ SUBKEY_R(i + 2); dw = ROL8(dw);/* round 3 */
SUBKEY_R(i + 2) = SUBKEY_L(i + 2) ^ dw; SUBKEY_L(i + 2) = dw;
- dw = SUBKEY_L(i + 3) ^ SUBKEY_R(i + 3); dw = rol32(dw, 8);/* round 4 */
+ dw = SUBKEY_L(i + 3) ^ SUBKEY_R(i + 3); dw = ROL8(dw);/* round 4 */
SUBKEY_R(i + 3) = SUBKEY_L(i + 3) ^ dw; SUBKEY_L(i + 3) = dw;
- dw = SUBKEY_L(i + 4) ^ SUBKEY_R(i + 4); dw = rol32(dw, 9);/* round 5 */
+ dw = SUBKEY_L(i + 4) ^ SUBKEY_R(i + 4); dw = ROL8(dw);/* round 5 */
SUBKEY_R(i + 4) = SUBKEY_L(i + 4) ^ dw; SUBKEY_L(i + 4) = dw;
- dw = SUBKEY_L(i + 5) ^ SUBKEY_R(i + 5); dw = rol32(dw, 8);/* round 6 */
+ dw = SUBKEY_L(i + 5) ^ SUBKEY_R(i + 5); dw = ROL8(dw);/* round 6 */
SUBKEY_R(i + 5) = SUBKEY_L(i + 5) ^ dw; SUBKEY_L(i + 5) = dw;
i += 8;
} while (i < max);
/**
* k == kll || klr || krl || krr (|| is concatenation)
*/
- kll = get_unaligned_be32(key);
- klr = get_unaligned_be32(key + 4);
- krl = get_unaligned_be32(key + 8);
- krr = get_unaligned_be32(key + 12);
+ GETU32(kll, key );
+ GETU32(klr, key + 4);
+ GETU32(krl, key + 8);
+ GETU32(krr, key + 12);
/* generate KL dependent subkeys */
/* kw1 */
* key = (kll || klr || krl || krr || krll || krlr || krrl || krrr)
* (|| is concatenation)
*/
- kll = get_unaligned_be32(key);
- klr = get_unaligned_be32(key + 4);
- krl = get_unaligned_be32(key + 8);
- krr = get_unaligned_be32(key + 12);
- krll = get_unaligned_be32(key + 16);
- krlr = get_unaligned_be32(key + 20);
- krrl = get_unaligned_be32(key + 24);
- krrr = get_unaligned_be32(key + 28);
+ GETU32(kll, key );
+ GETU32(klr, key + 4);
+ GETU32(krl, key + 8);
+ GETU32(krr, key + 12);
+ GETU32(krll, key + 16);
+ GETU32(krlr, key + 20);
+ GETU32(krrl, key + 24);
+ GETU32(krrr, key + 28);
/* generate KL dependent subkeys */
/* kw1 */
t0 &= ll; \
t2 |= rr; \
rl ^= t2; \
- lr ^= rol32(t0, 1); \
+ lr ^= ROL1(t0); \
t3 = krl; \
t1 = klr; \
t3 &= rl; \
t1 |= lr; \
ll ^= t1; \
- rr ^= rol32(t3, 1); \
+ rr ^= ROL1(t3); \
} while(0)
#define CAMELLIA_ROUNDSM(xl, xr, kl, kr, yl, yr, il, ir) \
il ^= kl; \
ir ^= il ^ kr; \
yl ^= ir; \
- yr ^= ror32(il, 8) ^ ir; \
+ yr ^= ROR8(il) ^ ir; \
} while(0)
/* max = 24: 128bit encrypt, max = 32: 256bit encrypt */
console->flags |= CON_ENABLED;
console->index = index;
braille_co = console;
+ register_keyboard_notifier(&keyboard_notifier_block);
+ register_vt_notifier(&vt_notifier_block);
return 0;
}
{
if (braille_co != console)
return -EINVAL;
+ unregister_keyboard_notifier(&keyboard_notifier_block);
+ unregister_vt_notifier(&vt_notifier_block);
braille_co = NULL;
return 0;
}
-
-static int __init braille_init(void)
-{
- register_keyboard_notifier(&keyboard_notifier_block);
- register_vt_notifier(&vt_notifier_block);
- return 0;
-}
-
-console_initcall(braille_init);
arg = arg->common.next;
}
- ACPI_ERROR((AE_INFO,
+ ACPI_WARNING((AE_INFO,
"Package List length (%X) larger than NumElements count (%X), truncated\n",
i, element_count));
} else if (i < element_count) {
"firmware_node");
ret = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj,
"physical_node");
- if (acpi_dev->wakeup.flags.valid)
+ if (acpi_dev->wakeup.flags.valid) {
device_set_wakeup_capable(dev, true);
+ device_set_wakeup_enable(dev,
+ acpi_dev->wakeup.state.enabled);
+ }
}
return 0;
{
set_no_mwait, "Extensa 5220", {
DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
- DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL},
{},
* 1 -> ignore _PPC totally -> forced by user through boot param
*/
static int ignore_ppc = -1;
-module_param(ignore_ppc, uint, 0644);
+module_param(ignore_ppc, int, 0644);
MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
"limited by BIOS, this should help");
if (wait_event_timeout(hc->wait, smb_check_done(hc),
msecs_to_jiffies(timeout)))
return 0;
+ /*
+ * After the timeout happens, OS will try to check the status of SMbus.
+ * If the status is what OS expected, it will be regarded as the bogus
+ * timeout.
+ */
+ if (smb_check_done(hc))
+ return 0;
else
return -ETIME;
}
return 0;
}
+static void physical_device_enable_wakeup(struct acpi_device *adev)
+{
+ struct device *dev = acpi_get_physical_device(adev->handle);
+
+ if (dev && device_can_wakeup(dev))
+ device_set_wakeup_enable(dev, adev->wakeup.state.enabled);
+}
+
static ssize_t
acpi_system_write_wakeup_device(struct file *file,
const char __user * buffer,
}
}
if (found_dev) {
+ physical_device_enable_wakeup(found_dev);
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev = container_of(node,
struct
dev->pnp.bus_id, found_dev->pnp.bus_id);
dev->wakeup.state.enabled =
found_dev->wakeup.state.enabled;
+ physical_device_enable_wakeup(dev);
}
}
}
static int __init acpi_parse_apic_instance(char *str)
{
+ if (!str)
+ return -EINVAL;
acpi_apic_instance = simple_strtoul(str, NULL, 0);
tristate "Marvell PATA support via legacy mode"
depends on PCI
help
- This option enables limited support for the Marvell 88SE6145 ATA
- controller.
+ This option enables limited support for the Marvell 88SE61xx ATA
+ controllers. If you wish to use only the SATA ports then select
+ the AHCI driver alone. If you wish to the use the PATA port or
+ both SATA and PATA include this driver.
If unsure, say N.
/* board_ahci_mv */
{
AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
- AHCI_HFLAG_MV_PATA),
+ AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
.pio_mask = 0x1f, /* pio0-4 */
{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
{ PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
MODULE_PARM_DESC(ahci_em_messages,
"Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
+#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
+static int marvell_enable;
+#else
+static int marvell_enable = 1;
+#endif
+module_param(marvell_enable, int, 0644);
+MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
+
+
static inline int ahci_nr_ports(u32 cap)
{
return (cap & 0x1f) + 1;
"MV_AHCI HACK: port_map %x -> %x\n",
port_map,
port_map & mv);
+ dev_printk(KERN_ERR, &pdev->dev,
+ "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
port_map &= mv;
}
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+ /* The AHCI driver can only drive the SATA ports, the PATA driver
+ can drive them all so if both drivers are selected make sure
+ AHCI stays out of the way */
+ if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
+ return -ENODEV;
+
/* acquire resources */
rc = pcim_enable_device(pdev);
if (rc)
* off.
*/
if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) {
- int rc = piix_disable_ahci(pdev);
+ rc = piix_disable_ahci(pdev);
if (rc)
return rc;
}
break;
case HSM_ST_ERR:
- /* make sure qc->err_mask is available to
- * know what's wrong and recover
- */
- WARN_ON(!(qc->err_mask & (AC_ERR_DEV | AC_ERR_HSM)));
-
ap->hsm_task_state = HSM_ST_IDLE;
/* complete taskfile transaction */
#include <linux/ata.h>
#define DRV_NAME "pata_marvell"
-#define DRV_VERSION "0.1.4"
+#define DRV_VERSION "0.1.6"
/**
- * marvell_pre_reset - check for 40/80 pin
- * @link: link
- * @deadline: deadline jiffies for the operation
+ * marvell_pata_active - check if PATA is active
+ * @pdev: PCI device
*
- * Perform the PATA port setup we need.
+ * Returns 1 if the PATA port may be active. We know how to check this
+ * for the 6145 but not the other devices
*/
-static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
+static int marvell_pata_active(struct pci_dev *pdev)
{
- struct ata_port *ap = link->ap;
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int i;
u32 devices;
void __iomem *barp;
- int i;
- /* Check if our port is enabled */
+ /* We don't yet know how to do this for other devices */
+ if (pdev->device != 0x6145)
+ return 1;
barp = pci_iomap(pdev, 5, 0x10);
if (barp == NULL)
return -ENOMEM;
+
printk("BAR5:");
for(i = 0; i <= 0x0F; i++)
printk("%02X:%02X ", i, ioread8(barp + i));
devices = ioread32(barp + 0x0C);
pci_iounmap(pdev, barp);
- if ((pdev->device == 0x6145) && (ap->port_no == 0) &&
- (!(devices & 0x10))) /* PATA enable ? */
- return -ENOENT;
+ if (devices & 0x10)
+ return 1;
+ return 0;
+}
+
+/**
+ * marvell_pre_reset - check for 40/80 pin
+ * @link: link
+ * @deadline: deadline jiffies for the operation
+ *
+ * Perform the PATA port setup we need.
+ */
+
+static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ if (pdev->device == 0x6145 && ap->port_no == 0 &&
+ !marvell_pata_active(pdev)) /* PATA enable ? */
+ return -ENOENT;
return ata_sff_prereset(link, deadline);
}
if (pdev->device == 0x6101)
ppi[1] = &ata_dummy_port_info;
+#if defined(CONFIG_AHCI) || defined(CONFIG_AHCI_MODULE)
+ if (!marvell_pata_active(pdev)) {
+ printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n");
+ return -ENODEV;
+ }
+#endif
return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL);
}
/* Try to acquire MMIO resources and fallback to PIO if
* that fails
*/
- rc = pcim_enable_device(pdev);
- if (rc)
- return rc;
rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
if (rc)
goto use_ioports;
PORT_SCR = 0x20,
/* HOST_CTL bits */
+ HCTL_LEDEN = (1 << 3), /* enable LED operation */
HCTL_IRQOFF = (1 << 8), /* global IRQ off */
HCTL_FTHD0 = (1 << 10), /* fifo threshold 0 */
HCTL_FTHD1 = (1 << 11), /* fifo threshold 1*/
void __iomem *port_base = inic_port_base(ap);
/* fire up the ADMA engine */
- writew(HCTL_FTHD0, port_base + HOST_CTL);
+ writew(HCTL_FTHD0 | HCTL_LEDEN, port_base + HOST_CTL);
writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL);
writeb(0, port_base + PORT_CPB_PTQFIFO);
{ PCI_VDEVICE(MARVELL, 0x5041), chip_504x },
{ PCI_VDEVICE(MARVELL, 0x5080), chip_5080 },
{ PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
- /* RocketRAID 1740/174x have different identifiers */
+ /* RocketRAID 1720/174x have different identifiers */
+ { PCI_VDEVICE(TTI, 0x1720), chip_6042 },
{ PCI_VDEVICE(TTI, 0x1740), chip_508x },
{ PCI_VDEVICE(TTI, 0x1742), chip_508x },
.slave_configure = nv_swncq_slave_config,
};
-static struct ata_port_operations nv_generic_ops = {
+/* OSDL bz3352 reports that some nv controllers can't determine device
+ * signature reliably and nv_hardreset is implemented to work around
+ * the problem. This was reported on nf3 and it's unclear whether any
+ * other controllers are affected. However, the workaround has been
+ * applied to all variants and there isn't much to gain by trying to
+ * find out exactly which ones are affected at this point especially
+ * because NV has moved over to ahci for newer controllers.
+ */
+static struct ata_port_operations nv_common_ops = {
.inherits = &ata_bmdma_port_ops,
.hardreset = nv_hardreset,
.scr_read = nv_scr_read,
.scr_write = nv_scr_write,
};
+/* OSDL bz11195 reports that link doesn't come online after hardreset
+ * on generic nv's and there have been several other similar reports
+ * on linux-ide. Disable hardreset for generic nv's.
+ */
+static struct ata_port_operations nv_generic_ops = {
+ .inherits = &nv_common_ops,
+ .hardreset = ATA_OP_NULL,
+};
+
static struct ata_port_operations nv_nf2_ops = {
- .inherits = &nv_generic_ops,
+ .inherits = &nv_common_ops,
.freeze = nv_nf2_freeze,
.thaw = nv_nf2_thaw,
};
static struct ata_port_operations nv_ck804_ops = {
- .inherits = &nv_generic_ops,
+ .inherits = &nv_common_ops,
.freeze = nv_ck804_freeze,
.thaw = nv_ck804_thaw,
.host_stop = nv_ck804_host_stop,
};
static struct ata_port_operations nv_adma_ops = {
- .inherits = &nv_generic_ops,
+ .inherits = &nv_common_ops,
.check_atapi_dma = nv_adma_check_atapi_dma,
.sff_tf_read = nv_adma_tf_read,
};
static struct ata_port_operations nv_swncq_ops = {
- .inherits = &nv_generic_ops,
+ .inherits = &nv_common_ops,
.qc_defer = ata_std_qc_defer,
.qc_prep = nv_swncq_qc_prep,
/* Broadcom BCM2046 */
{ USB_DEVICE(0x0a5c, 0x2151), .driver_info = BTUSB_RESET },
+ /* Apple MacBook Pro with Broadcom chip */
+ { USB_DEVICE(0x05ac, 0x820f), .driver_info = BTUSB_RESET },
+
/* IBM/Lenovo ThinkPad with Broadcom chip */
{ USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_RESET | BTUSB_WRONG_SCO_MTU },
struct btusb_data {
struct hci_dev *hdev;
struct usb_device *udev;
+ struct usb_interface *intf;
struct usb_interface *isoc;
spinlock_t lock;
err = btusb_submit_intr_urb(hdev);
if (err < 0) {
- clear_bit(BTUSB_INTR_RUNNING, &hdev->flags);
+ clear_bit(BTUSB_INTR_RUNNING, &data->flags);
clear_bit(HCI_RUNNING, &hdev->flags);
}
if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
return 0;
+ cancel_work_sync(&data->work);
+
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
- usb_kill_anchored_urbs(&data->intr_anchor);
+ usb_kill_anchored_urbs(&data->isoc_anchor);
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
usb_kill_anchored_urbs(&data->bulk_anchor);
}
data->udev = interface_to_usbdev(intf);
+ data->intf = intf;
spin_lock_init(&data->lock);
if (data->isoc) {
err = usb_driver_claim_interface(&btusb_driver,
- data->isoc, NULL);
+ data->isoc, data);
if (err < 0) {
hci_free_dev(hdev);
kfree(data);
hdev = data->hdev;
- if (data->isoc)
- usb_driver_release_interface(&btusb_driver, data->isoc);
+ __hci_dev_hold(hdev);
- usb_set_intfdata(intf, NULL);
+ usb_set_intfdata(data->intf, NULL);
+
+ if (data->isoc)
+ usb_set_intfdata(data->isoc, NULL);
hci_unregister_dev(hdev);
+ if (intf == data->isoc)
+ usb_driver_release_interface(&btusb_driver, data->intf);
+ else if (data->isoc)
+ usb_driver_release_interface(&btusb_driver, data->isoc);
+
+ __hci_dev_put(hdev);
+
hci_free_dev(hdev);
}
/* read-write data: */
spinlock_t lock;
unsigned add_ptr;
- int entropy_count;
+ int entropy_count; /* Must at no time exceed ->POOLBITS! */
int input_rotate;
};
static void credit_entropy_bits(struct entropy_store *r, int nbits)
{
unsigned long flags;
+ int entropy_count;
if (!nbits)
return;
spin_lock_irqsave(&r->lock, flags);
DEBUG_ENT("added %d entropy credits to %s\n", nbits, r->name);
- r->entropy_count += nbits;
- if (r->entropy_count < 0) {
+ entropy_count = r->entropy_count;
+ entropy_count += nbits;
+ if (entropy_count < 0) {
DEBUG_ENT("negative entropy/overflow\n");
- r->entropy_count = 0;
- } else if (r->entropy_count > r->poolinfo->POOLBITS)
- r->entropy_count = r->poolinfo->POOLBITS;
+ entropy_count = 0;
+ } else if (entropy_count > r->poolinfo->POOLBITS)
+ entropy_count = r->poolinfo->POOLBITS;
+ r->entropy_count = entropy_count;
/* should we wake readers? */
- if (r == &input_pool &&
- r->entropy_count >= random_read_wakeup_thresh) {
+ if (r == &input_pool && entropy_count >= random_read_wakeup_thresh) {
wake_up_interruptible(&random_read_wait);
kill_fasync(&fasync, SIGIO, POLL_IN);
}
-
spin_unlock_irqrestore(&r->lock, flags);
}
{
struct tty_driver *p, *res = NULL;
int tty_line = 0;
+ int len;
char *str;
+ for (str = name; *str; str++)
+ if ((*str >= '0' && *str <= '9') || *str == ',')
+ break;
+ if (!*str)
+ return NULL;
+
+ len = str - name;
+ tty_line = simple_strtoul(str, &str, 10);
+
mutex_lock(&tty_mutex);
/* Search through the tty devices to look for a match */
list_for_each_entry(p, &tty_drivers, tty_drivers) {
- str = name + strlen(p->name);
- tty_line = simple_strtoul(str, &str, 10);
+ if (strncmp(name, p->name, len) != 0)
+ continue;
if (*str == ',')
str++;
if (*str == '\0')
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/delay.h>
#include <asm/io.h>
/*
*/
static int verify_pmtmr_rate(void)
{
- u32 value1, value2;
+ cycle_t value1, value2;
unsigned long count, delta;
mach_prepare_counter();
- value1 = read_pmtmr();
+ value1 = clocksource_acpi_pm.read();
mach_countup(&count);
- value2 = read_pmtmr();
+ value2 = clocksource_acpi_pm.read();
delta = (value2 - value1) & ACPI_PM_MASK;
/* Check that the PMTMR delta is within 5% of what we expect */
#define verify_pmtmr_rate() (0)
#endif
+/* Number of monotonicity checks to perform during initialization */
+#define ACPI_PM_MONOTONICITY_CHECKS 10
+/* Number of reads we try to get two different values */
+#define ACPI_PM_READ_CHECKS 10000
+
static int __init init_acpi_pm_clocksource(void)
{
- u32 value1, value2;
- unsigned int i;
+ cycle_t value1, value2;
+ unsigned int i, j = 0;
if (!pmtmr_ioport)
return -ENODEV;
clocksource_acpi_pm.shift);
/* "verify" this timing source: */
- value1 = read_pmtmr();
- for (i = 0; i < 10000; i++) {
- value2 = read_pmtmr();
- if (value2 == value1)
- continue;
- if (value2 > value1)
- goto pm_good;
- if ((value2 < value1) && ((value2) < 0xFFF))
- goto pm_good;
- printk(KERN_INFO "PM-Timer had inconsistent results:"
- " 0x%#x, 0x%#x - aborting.\n", value1, value2);
- return -EINVAL;
+ for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
+ udelay(100 * j);
+ value1 = clocksource_acpi_pm.read();
+ for (i = 0; i < ACPI_PM_READ_CHECKS; i++) {
+ value2 = clocksource_acpi_pm.read();
+ if (value2 == value1)
+ continue;
+ if (value2 > value1)
+ break;
+ if ((value2 < value1) && ((value2) < 0xFFF))
+ break;
+ printk(KERN_INFO "PM-Timer had inconsistent results:"
+ " 0x%#llx, 0x%#llx - aborting.\n",
+ value1, value2);
+ return -EINVAL;
+ }
+ if (i == ACPI_PM_READ_CHECKS) {
+ printk(KERN_INFO "PM-Timer failed consistency check "
+ " (0x%#llx) - aborting.\n", value1);
+ return -ENODEV;
+ }
}
- printk(KERN_INFO "PM-Timer had no reasonable result:"
- " 0x%#x - aborting.\n", value1);
- return -ENODEV;
-pm_good:
if (verify_pmtmr_rate() != 0)
return -ENODEV;
edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_MODE0_ENCRYPT;
memcpy(req->giv, ctx->iv, crypto_aead_ivsize(authenc));
+ /* avoid consecutive packets going out with same IV */
+ *(__be64 *)req->giv ^= cpu_to_be64(req->seq);
return ipsec_esp(edesc, areq, req->giv, req->seq,
ipsec_esp_encrypt_done);
priv->ofdev = ofdev;
+ INIT_LIST_HEAD(&priv->alg_list);
+
tasklet_init(&priv->done_task, talitos_done, (unsigned long)dev);
tasklet_init(&priv->error_task, talitos_error, (unsigned long)dev);
}
/* register crypto algorithms the device supports */
- INIT_LIST_HEAD(&priv->alg_list);
-
for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
if (hw_supports(dev, driver_algs[i].desc_hdr_template)) {
struct talitos_crypto_alg *t_alg;
int i;
status_block = dma_readl(dw, RAW.BLOCK);
- status_xfer = dma_readl(dw, RAW.BLOCK);
+ status_xfer = dma_readl(dw, RAW.XFER);
status_err = dma_readl(dw, RAW.ERROR);
dev_vdbg(dw->dma.dev, "tasklet: status_block=%x status_err=%x\n",
control = (void *)header + sizeof(*header);
end = (void *)control + control->hdr.length;
- eot_offset = (void *)header + header->length -
- (void *)control - sizeof(*header);
+ eot_offset = (void *)header + header->length - (void *)control;
rc = ibft_verify_hdr("control", (struct ibft_hdr *)control, id_control,
sizeof(*control));
return 0;
DRM_UDELAY(1);
}
- DRM_INFO("wait for fifo failed status : 0x%08X 0x%08X\n",
+ DRM_DEBUG("wait for fifo failed status : 0x%08X 0x%08X\n",
RADEON_READ(RADEON_RBBM_STATUS),
RADEON_READ(R300_VAP_CNTL_STATUS));
}
DRM_UDELAY(1);
}
- DRM_INFO("wait idle failed status : 0x%08X 0x%08X\n",
+ DRM_DEBUG("wait idle failed status : 0x%08X 0x%08X\n",
RADEON_READ(RADEON_RBBM_STATUS),
RADEON_READ(R300_VAP_CNTL_STATUS));
return i2c_smbus_write_byte_data(client, reg, value);
}
-struct ad7414_data *ad7414_update_device(struct device *dev)
+static struct ad7414_data *ad7414_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct ad7414_data *data = i2c_get_clientdata(client);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("System voltages control via Attansic ATXP1");
-MODULE_VERSION("0.6.2");
+MODULE_VERSION("0.6.3");
MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
#define ATXP1_VID 0x00
if (!((i2c_smbus_read_byte_data(new_client, 0x3e) == 0) &&
(i2c_smbus_read_byte_data(new_client, 0x3f) == 0) &&
(i2c_smbus_read_byte_data(new_client, 0xfe) == 0) &&
- (i2c_smbus_read_byte_data(new_client, 0xff) == 0) )) {
+ (i2c_smbus_read_byte_data(new_client, 0xff) == 0)))
+ return -ENODEV;
- /* No vendor ID, now checking if registers 0x10,0x11 (non-existent)
- * showing the same as register 0x00 */
- temp = i2c_smbus_read_byte_data(new_client, 0x00);
+ /* No vendor ID, now checking if registers 0x10,0x11 (non-existent)
+ * showing the same as register 0x00 */
+ temp = i2c_smbus_read_byte_data(new_client, 0x00);
- if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) &&
- (i2c_smbus_read_byte_data(new_client, 0x11) == temp) ))
- return -ENODEV;
- }
+ if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) &&
+ (i2c_smbus_read_byte_data(new_client, 0x11) == temp)))
+ return -ENODEV;
/* Get VRM */
temp = vid_which_vrm();
static inline int has_16bit_fans(const struct it87_data *data)
{
/* IT8705F Datasheet 0.4.1, 3h == Version G.
- IT8712F Datasheet 0.9.1, section 8.3.5 indicates 7h == Version I.
+ IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J.
These are the first revisions with 16bit tachometer support. */
return (data->type == it87 && data->revision >= 0x03)
- || (data->type == it8712 && data->revision >= 0x07)
+ || (data->type == it8712 && data->revision >= 0x08)
|| data->type == it8716
|| data->type == it8718;
}
};
-static int i2c_powermac_remove(struct platform_device *dev)
+static int __devexit i2c_powermac_remove(struct platform_device *dev)
{
struct i2c_adapter *adapter = platform_get_drvdata(dev);
struct pmac_i2c_bus *bus = i2c_get_adapdata(adapter);
}
-static int __devexit i2c_powermac_probe(struct platform_device *dev)
+static int __devinit i2c_powermac_probe(struct platform_device *dev)
{
struct pmac_i2c_bus *bus = dev->dev.platform_data;
struct device_node *parent = NULL;
#include <linux/clk.h>
#include <linux/io.h>
+/* Transmit operation: */
+/* */
+/* 0 byte transmit */
+/* BUS: S A8 ACK P */
+/* IRQ: DTE WAIT */
+/* ICIC: */
+/* ICCR: 0x94 0x90 */
+/* ICDR: A8 */
+/* */
+/* 1 byte transmit */
+/* BUS: S A8 ACK D8(1) ACK P */
+/* IRQ: DTE WAIT WAIT */
+/* ICIC: -DTE */
+/* ICCR: 0x94 0x90 */
+/* ICDR: A8 D8(1) */
+/* */
+/* 2 byte transmit */
+/* BUS: S A8 ACK D8(1) ACK D8(2) ACK P */
+/* IRQ: DTE WAIT WAIT WAIT */
+/* ICIC: -DTE */
+/* ICCR: 0x94 0x90 */
+/* ICDR: A8 D8(1) D8(2) */
+/* */
+/* 3 bytes or more, +---------+ gets repeated */
+/* */
+/* */
+/* Receive operation: */
+/* */
+/* 0 byte receive - not supported since slave may hold SDA low */
+/* */
+/* 1 byte receive [TX] | [RX] */
+/* BUS: S A8 ACK | D8(1) ACK P */
+/* IRQ: DTE WAIT | WAIT DTE */
+/* ICIC: -DTE | +DTE */
+/* ICCR: 0x94 0x81 | 0xc0 */
+/* ICDR: A8 | D8(1) */
+/* */
+/* 2 byte receive [TX]| [RX] */
+/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK P */
+/* IRQ: DTE WAIT | WAIT WAIT DTE */
+/* ICIC: -DTE | +DTE */
+/* ICCR: 0x94 0x81 | 0xc0 */
+/* ICDR: A8 | D8(1) D8(2) */
+/* */
+/* 3 byte receive [TX] | [RX] */
+/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK D8(3) ACK P */
+/* IRQ: DTE WAIT | WAIT WAIT WAIT DTE */
+/* ICIC: -DTE | +DTE */
+/* ICCR: 0x94 0x81 | 0xc0 */
+/* ICDR: A8 | D8(1) D8(2) D8(3) */
+/* */
+/* 4 bytes or more, this part is repeated +---------+ */
+/* */
+/* */
+/* Interrupt order and BUSY flag */
+/* ___ _ */
+/* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/ */
+/* SCL \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/ */
+/* */
+/* S D7 D6 D5 D4 D3 D2 D1 D0 P */
+/* ___ */
+/* WAIT IRQ ________________________________/ \___________ */
+/* TACK IRQ ____________________________________/ \_______ */
+/* DTE IRQ __________________________________________/ \_ */
+/* AL IRQ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */
+/* _______________________________________________ */
+/* BUSY __/ \_ */
+/* */
+
enum sh_mobile_i2c_op {
OP_START = 0,
- OP_TX_ONLY,
+ OP_TX_FIRST,
+ OP_TX,
OP_TX_STOP,
OP_TX_TO_RX,
- OP_RX_ONLY,
+ OP_RX,
OP_RX_STOP,
+ OP_RX_STOP_DATA,
};
struct sh_mobile_i2c_data {
spin_lock_irqsave(&pd->lock, flags);
switch (op) {
- case OP_START:
+ case OP_START: /* issue start and trigger DTE interrupt */
iowrite8(0x94, ICCR(pd));
break;
- case OP_TX_ONLY:
+ case OP_TX_FIRST: /* disable DTE interrupt and write data */
+ iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE, ICIC(pd));
iowrite8(data, ICDR(pd));
break;
- case OP_TX_STOP:
+ case OP_TX: /* write data */
iowrite8(data, ICDR(pd));
- iowrite8(0x90, ICCR(pd));
- iowrite8(ICIC_ALE | ICIC_TACKE, ICIC(pd));
break;
- case OP_TX_TO_RX:
+ case OP_TX_STOP: /* write data and issue a stop afterwards */
iowrite8(data, ICDR(pd));
+ iowrite8(0x90, ICCR(pd));
+ break;
+ case OP_TX_TO_RX: /* select read mode */
iowrite8(0x81, ICCR(pd));
break;
- case OP_RX_ONLY:
+ case OP_RX: /* just read data */
ret = ioread8(ICDR(pd));
break;
- case OP_RX_STOP:
+ case OP_RX_STOP: /* enable DTE interrupt, issue stop */
+ iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
+ ICIC(pd));
+ iowrite8(0xc0, ICCR(pd));
+ break;
+ case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
+ iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
+ ICIC(pd));
ret = ioread8(ICDR(pd));
iowrite8(0xc0, ICCR(pd));
break;
return ret;
}
+static int sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd)
+{
+ if (pd->pos == -1)
+ return 1;
+
+ return 0;
+}
+
+static int sh_mobile_i2c_is_last_byte(struct sh_mobile_i2c_data *pd)
+{
+ if (pd->pos == (pd->msg->len - 1))
+ return 1;
+
+ return 0;
+}
+
+static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd,
+ unsigned char *buf)
+{
+ switch (pd->pos) {
+ case -1:
+ *buf = (pd->msg->addr & 0x7f) << 1;
+ *buf |= (pd->msg->flags & I2C_M_RD) ? 1 : 0;
+ break;
+ default:
+ *buf = pd->msg->buf[pd->pos];
+ }
+}
+
+static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd)
+{
+ unsigned char data;
+
+ if (pd->pos == pd->msg->len)
+ return 1;
+
+ sh_mobile_i2c_get_data(pd, &data);
+
+ if (sh_mobile_i2c_is_last_byte(pd))
+ i2c_op(pd, OP_TX_STOP, data);
+ else if (sh_mobile_i2c_is_first_byte(pd))
+ i2c_op(pd, OP_TX_FIRST, data);
+ else
+ i2c_op(pd, OP_TX, data);
+
+ pd->pos++;
+ return 0;
+}
+
+static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
+{
+ unsigned char data;
+ int real_pos;
+
+ do {
+ if (pd->pos <= -1) {
+ sh_mobile_i2c_get_data(pd, &data);
+
+ if (sh_mobile_i2c_is_first_byte(pd))
+ i2c_op(pd, OP_TX_FIRST, data);
+ else
+ i2c_op(pd, OP_TX, data);
+ break;
+ }
+
+ if (pd->pos == 0) {
+ i2c_op(pd, OP_TX_TO_RX, 0);
+ break;
+ }
+
+ real_pos = pd->pos - 2;
+
+ if (pd->pos == pd->msg->len) {
+ if (real_pos < 0) {
+ i2c_op(pd, OP_RX_STOP, 0);
+ break;
+ }
+ data = i2c_op(pd, OP_RX_STOP_DATA, 0);
+ } else
+ data = i2c_op(pd, OP_RX, 0);
+
+ pd->msg->buf[real_pos] = data;
+ } while (0);
+
+ pd->pos++;
+ return pd->pos == (pd->msg->len + 2);
+}
+
static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
{
struct platform_device *dev = dev_id;
struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
- struct i2c_msg *msg = pd->msg;
- unsigned char data, sr;
- int wakeup = 0;
+ unsigned char sr;
+ int wakeup;
sr = ioread8(ICSR(pd));
- pd->sr |= sr;
+ pd->sr |= sr; /* remember state */
dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
- (msg->flags & I2C_M_RD) ? "read" : "write",
- pd->pos, msg->len);
+ (pd->msg->flags & I2C_M_RD) ? "read" : "write",
+ pd->pos, pd->msg->len);
if (sr & (ICSR_AL | ICSR_TACK)) {
- iowrite8(0, ICIC(pd)); /* disable interrupts */
- wakeup = 1;
- goto do_wakeup;
- }
+ /* don't interrupt transaction - continue to issue stop */
+ iowrite8(sr & ~(ICSR_AL | ICSR_TACK), ICSR(pd));
+ wakeup = 0;
+ } else if (pd->msg->flags & I2C_M_RD)
+ wakeup = sh_mobile_i2c_isr_rx(pd);
+ else
+ wakeup = sh_mobile_i2c_isr_tx(pd);
- if (pd->pos == msg->len) {
- i2c_op(pd, OP_RX_ONLY, 0);
- wakeup = 1;
- goto do_wakeup;
- }
+ if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */
+ iowrite8(sr & ~ICSR_WAIT, ICSR(pd));
- if (pd->pos == -1) {
- data = (msg->addr & 0x7f) << 1;
- data |= (msg->flags & I2C_M_RD) ? 1 : 0;
- } else
- data = msg->buf[pd->pos];
-
- if ((pd->pos == -1) || !(msg->flags & I2C_M_RD)) {
- if (msg->flags & I2C_M_RD)
- i2c_op(pd, OP_TX_TO_RX, data);
- else if (pd->pos == (msg->len - 1)) {
- i2c_op(pd, OP_TX_STOP, data);
- wakeup = 1;
- } else
- i2c_op(pd, OP_TX_ONLY, data);
- } else {
- if (pd->pos == (msg->len - 1))
- data = i2c_op(pd, OP_RX_STOP, 0);
- else
- data = i2c_op(pd, OP_RX_ONLY, 0);
-
- msg->buf[pd->pos] = data;
- }
- pd->pos++;
-
- do_wakeup:
if (wakeup) {
pd->sr |= SW_DONE;
wake_up(&pd->wait);
static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
{
+ if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) {
+ dev_err(pd->dev, "Unsupported zero length i2c read\n");
+ return -EIO;
+ }
+
/* Initialize channel registers */
iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
pd->pos = -1;
pd->sr = 0;
- /* Enable all interrupts except wait */
- iowrite8(ioread8(ICIC(pd)) | ICIC_ALE | ICIC_TACKE | ICIC_DTEE,
- ICIC(pd));
+ /* Enable all interrupts to begin with */
+ iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, ICIC(pd));
return 0;
}
if (!k)
dev_err(pd->dev, "Transfer request timed out\n");
- retry_count = 10;
+ retry_count = 1000;
again:
val = ioread8(ICSR(pd));
dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
- if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
- err = -EIO;
- break;
- }
-
/* the interrupt handler may wake us up before the
* transfer is finished, so poll the hardware
* until we're done.
*/
-
- if (!(!(val & ICSR_BUSY) && (val & ICSR_SCLM) &&
- (val & ICSR_SDAM))) {
- msleep(1);
+ if (val & ICSR_BUSY) {
+ udelay(10);
if (retry_count--)
goto again;
dev_err(pd->dev, "Polling timed out\n");
break;
}
+
+ /* handle missing acknowledge and arbitration lost */
+ if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
+ err = -EIO;
+ break;
+ }
}
deactivate_ch(pd);
if (!driver->probe || !driver->id_table)
return -ENODEV;
client->driver = driver;
+ if (!device_can_wakeup(&client->dev))
+ device_init_wakeup(&client->dev,
+ client->flags & I2C_CLIENT_WAKE);
dev_dbg(dev, "probe\n");
status = driver->probe(client, i2c_match_id(driver->id_table, client));
client->adapter = adap;
client->dev.platform_data = info->platform_data;
- device_init_wakeup(&client->dev, info->flags & I2C_CLIENT_WAKE);
- client->flags = info->flags & ~I2C_CLIENT_WAKE;
+ client->flags = info->flags;
client->addr = info->addr;
client->irq = info->irq;
&& address_data->normal_i2c[0] == I2C_CLIENT_END)
return 0;
- dev_warn(&adapter->dev, "SMBus Quick command not supported, "
- "can't probe for chips\n");
+ dev_dbg(&adapter->dev, "SMBus Quick command not supported, "
+ "can't probe for chips\n");
return -EOPNOTSUPP;
}
}
}
+ /* Stop here if the classes do not match */
+ if (!(adapter->class & driver->class))
+ goto exit_free;
+
/* Stop here if we can't use SMBUS_QUICK */
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
if (address_data->probe[0] == I2C_CLIENT_END
goto exit_free;
}
- /* Stop here if the classes do not match */
- if (!(adapter->class & driver->class))
- goto exit_free;
-
/* Probe entries are done second, and are not affected by ignore
entries either */
for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) {
goto out;
i2c_dev_class = class_create(THIS_MODULE, "i2c-dev");
- if (IS_ERR(i2c_dev_class))
+ if (IS_ERR(i2c_dev_class)) {
+ res = PTR_ERR(i2c_dev_class);
goto out_unreg_chrdev;
+ }
res = i2c_add_driver(&i2cdev_driver);
if (res)
module will be called ide-floppy.
config BLK_DEV_IDESCSI
- tristate "SCSI emulation support"
+ tristate "SCSI emulation support (DEPRECATED)"
depends on SCSI
select IDE_ATAPI
---help---
and will allow you to use a SCSI device driver instead of a native
ATAPI driver.
- This is useful if you have an ATAPI device for which no native
- driver has been written (for example, an ATAPI PD-CD drive);
- you can then use this emulation together with an appropriate SCSI
- device driver. In order to do this, say Y here and to "SCSI support"
- and "SCSI generic support", below. You must then provide the kernel
- command line "hdx=ide-scsi" (try "man bootparam" or see the
- documentation of your boot loader (lilo or loadlin) about how to
- pass options to the kernel at boot time) for devices if you want the
- native EIDE sub-drivers to skip over the native support, so that
- this SCSI emulation can be used instead.
-
- Note that this option does NOT allow you to attach SCSI devices to a
- box that doesn't have a SCSI host adapter installed.
-
If both this SCSI emulation and native ATAPI support are compiled
into the kernel, the native support will be used.
tristate "generic/default IDE chipset support"
depends on ALPHA || X86 || IA64 || M32R || MIPS
help
+ This is the generic IDE driver. This driver attaches to the
+ fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and
+ so on). Please note that if this driver is built into the
+ kernel or loaded before other ATA (IDE or libata) drivers
+ and the controller is located at legacy ports, this driver
+ may grab those ports and thus can prevent the controller
+ specific driver from attaching.
+
+ Also, currently, IDE generic doesn't allow IRQ sharing
+ meaning that the IRQs it grabs won't be available to other
+ controllers sharing those IRQs which usually makes drivers
+ for those controllers fail. Generally, it's not a good idea
+ to load IDE generic driver on modern systems.
+
If unsure, say N.
config BLK_DEV_PLATFORM
.mwdma_mask = ATA_MWDMA2,
};
-static int __devinit palm_bk3710_probe(struct platform_device *pdev)
+static int __init palm_bk3710_probe(struct platform_device *pdev)
{
struct clk *clk;
struct resource *mem, *irq;
- struct ide_host *host;
unsigned long base, rate;
int i, rc;
hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
hw.irq = irq->start;
+ hw.dev = &pdev->dev;
hw.chipset = ide_palm3710;
palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
.name = "palm_bk3710",
.owner = THIS_MODULE,
},
- .probe = palm_bk3710_probe,
- .remove = NULL,
};
static int __init palm_bk3710_init(void)
{
- return platform_driver_register(&platform_bk_driver);
+ return platform_driver_probe(&platform_bk_driver, palm_bk3710_probe);
}
module_init(palm_bk3710_init);
}
}
-/*
- * Compute drive->capacity, the full capacity of the drive
- * Called with drive->id != NULL.
- *
- * To compute capacity, this uses either of
- *
- * 1. CHS value set by user (whatever user sets will be trusted)
- * 2. LBA value from target drive (require new ATA feature)
- * 3. LBA value from system BIOS (new one is OK, old one may break)
- * 4. CHS value from system BIOS (traditional style)
- *
- * in above order (i.e., if value of higher priority is available,
- * reset will be ignored).
- */
static void init_idedisk_capacity(ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
{
idetape_tape_t *tape = drive->driver_data;
struct ide_atapi_pc pc;
- char fw_rev[6], vendor_id[10], product_id[18];
+ char fw_rev[4], vendor_id[8], product_id[16];
idetape_create_inquiry_cmd(&pc);
if (idetape_queue_pc_tail(drive, &pc)) {
memcpy(product_id, &pc.buf[16], 16);
memcpy(fw_rev, &pc.buf[32], 4);
- ide_fixstring(vendor_id, 10, 0);
- ide_fixstring(product_id, 18, 0);
- ide_fixstring(fw_rev, 6, 0);
+ ide_fixstring(vendor_id, 8, 0);
+ ide_fixstring(product_id, 16, 0);
+ ide_fixstring(fw_rev, 4, 0);
- printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n",
+ printk(KERN_INFO "ide-tape: %s <-> %s: %.8s %.16s rev %.4s\n",
drive->name, tape->name, vendor_id, product_id, fw_rev);
}
base = ioremap(offset, size);
+ memset(&hw, 0, sizeof(hw));
for (i = 0; i <= 7; i++)
hw.io_ports_array[i] =
(unsigned long)(base + ((0x1f0 + i) << 5));
return 0;
}
+static struct hpt_info *hpt3xx_get_info(struct device *dev)
+{
+ struct ide_host *host = dev_get_drvdata(dev);
+ struct hpt_info *info = (struct hpt_info *)host->host_priv;
+
+ return dev == host->dev[1] ? info + 1 : info;
+}
+
/*
* The Marvell bridge chips used on the HighPoint SATA cards do not seem
* to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes...
static u8 hpt3xx_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
u8 mask = hwif->ultra_mask;
switch (info->chip_type) {
static u8 hpt3xx_mdma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
switch (info->chip_type) {
case HPT372 :
{
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
struct hpt_timings *t = info->timings;
u8 itr_addr = 0x40 + (drive->dn * 4);
u32 old_itr = 0;
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
if (drive->quirk_list) {
if (info->chip_type >= HPT370) {
static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
{
unsigned long io_base = pci_resource_start(dev, 4);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (&dev->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(&dev->dev);
const char *name = DRV_NAME;
u8 pci_clk, dpll_clk = 0; /* PCI and DPLL clock in MHz */
u8 chip_type;
static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
u8 chip_type = info->chip_type;
u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
int serialize = HPT_SERIALIZE_IO;
u8 chip_type = info->chip_type;
u8 new_mcr, old_mcr = 0;
static void set_fmr_seg(struct mlx4_wqe_fmr_seg *fseg, struct ib_send_wr *wr)
{
struct mlx4_ib_fast_reg_page_list *mfrpl = to_mfrpl(wr->wr.fast_reg.page_list);
+ int i;
+
+ for (i = 0; i < wr->wr.fast_reg.page_list_len; ++i)
+ wr->wr.fast_reg.page_list->page_list[i] =
+ cpu_to_be64(wr->wr.fast_reg.page_list->page_list[i] |
+ MLX4_MTT_FLAG_PRESENT);
fseg->flags = convert_access(wr->wr.fast_reg.access_flags);
fseg->mem_key = cpu_to_be32(wr->wr.fast_reg.rkey);
return ret;
cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_CLOSED;
- ret = send_fin(cm_node, NULL);
-
- if (cm_node->accept_pend) {
- BUG_ON(!cm_node->listener);
- atomic_dec(&cm_node->listener->pend_accepts_cnt);
- BUG_ON(atomic_read(&cm_node->listener->pend_accepts_cnt) < 0);
- }
ret = send_reset(cm_node, NULL);
return ret;
atomic_inc(&cm_disconnects);
cm_event.event = IW_CM_EVENT_DISCONNECT;
if (last_ae == NES_AEQE_AEID_LLP_CONNECTION_RESET) {
+ issued_disconnect_reset = 1;
cm_event.status = IW_CM_EVENT_STATUS_RESET;
nes_debug(NES_DBG_CM, "Generating a CM "
"Disconnect Event (status reset) for "
nes_debug(NES_DBG_CM, "Call close API\n");
g_cm_core->api->close(g_cm_core, nesqp->cm_node);
- nesqp->cm_node = NULL;
}
return ret;
cm_node->apbvt_set = 1;
nesqp->cm_node = cm_node;
cm_node->nesqp = nesqp;
+ nes_add_ref(&nesqp->ibqp);
return 0;
}
if (ret)
printk(KERN_ERR "%s[%u] OFA CM event_handler returned, "
"ret=%d\n", __func__, __LINE__, ret);
- nes_rem_ref(&nesqp->ibqp);
cm_id->rem_ref(cm_id);
rem_ref_cm_node(event->cm_node->cm_core, event->cm_node);
struct delayed_work pkey_poll_task;
struct delayed_work mcast_task;
+ struct work_struct carrier_on_task;
struct work_struct flush_light;
struct work_struct flush_normal;
struct work_struct flush_heavy;
void ipoib_dev_cleanup(struct net_device *dev);
void ipoib_mcast_join_task(struct work_struct *work);
+void ipoib_mcast_carrier_on_task(struct work_struct *work);
void ipoib_mcast_send(struct net_device *dev, void *mgid, struct sk_buff *skb);
void ipoib_mcast_restart_task(struct work_struct *work);
struct net_device *dev = path->dev;
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct ipoib_ah *ah = NULL;
- struct ipoib_ah *old_ah;
+ struct ipoib_ah *old_ah = NULL;
struct ipoib_neigh *neigh, *tn;
struct sk_buff_head skqueue;
struct sk_buff *skb;
spin_lock_irqsave(&priv->lock, flags);
- old_ah = path->ah;
- path->ah = ah;
-
if (ah) {
path->pathrec = *pathrec;
+ old_ah = path->ah;
+ path->ah = ah;
+
ipoib_dbg(priv, "created address handle %p for LID 0x%04x, SL %d\n",
ah, be16_to_cpu(pathrec->dlid), pathrec->sl);
INIT_DELAYED_WORK(&priv->pkey_poll_task, ipoib_pkey_poll);
INIT_DELAYED_WORK(&priv->mcast_task, ipoib_mcast_join_task);
+ INIT_WORK(&priv->carrier_on_task, ipoib_mcast_carrier_on_task);
INIT_WORK(&priv->flush_light, ipoib_ib_dev_flush_light);
INIT_WORK(&priv->flush_normal, ipoib_ib_dev_flush_normal);
INIT_WORK(&priv->flush_heavy, ipoib_ib_dev_flush_heavy);
return ret;
}
+void ipoib_mcast_carrier_on_task(struct work_struct *work)
+{
+ struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv,
+ carrier_on_task);
+
+ /*
+ * Take rtnl_lock to avoid racing with ipoib_stop() and
+ * turning the carrier back on while a device is being
+ * removed.
+ */
+ rtnl_lock();
+ netif_carrier_on(priv->dev);
+ rtnl_unlock();
+}
+
static int ipoib_mcast_join_complete(int status,
struct ib_sa_multicast *multicast)
{
&priv->mcast_task, 0);
mutex_unlock(&mcast_mutex);
- if (mcast == priv->broadcast) {
- /*
- * Take RTNL lock here to avoid racing with
- * ipoib_stop() and turning the carrier back
- * on while a device is being removed.
- */
- rtnl_lock();
- netif_carrier_on(dev);
- rtnl_unlock();
- }
+ /*
+ * Defer carrier on work to ipoib_workqueue to avoid a
+ * deadlock on rtnl_lock here.
+ */
+ if (mcast == priv->broadcast)
+ queue_work(ipoib_workqueue, &priv->carrier_on_task);
return 0;
}
#include <linux/input.h>
#include <asm/portmux.h>
-#include <asm/mach/bf54x_keys.h>
+#include <mach/bf54x_keys.h>
#define DRV_NAME "bf54x-keys"
#define TIME_SCALE 100 /* 100 ns */
}
/* table of devices that work with this driver */
-static const struct usb_device_id bcm5974_table [] = {
+static const struct usb_device_id bcm5974_table[] = {
/* MacbookAir1.1 */
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ISO),
/* trackpad finger structure */
struct tp_finger {
- __le16 origin; /* left/right origin? */
+ __le16 origin; /* zero when switching track finger */
__le16 abs_x; /* absolute x coodinate */
__le16 abs_y; /* absolute y coodinate */
__le16 rel_x; /* relative x coodinate */
struct bt_data *bt_data; /* button transferred data */
struct urb *tp_urb; /* trackpad usb request block */
struct tp_data *tp_data; /* trackpad transferred data */
+ int fingers; /* number of fingers on trackpad */
};
/* logical dimensions */
#define SN_WIDTH 100 /* width signal-to-noise ratio */
#define SN_COORD 250 /* coordinate signal-to-noise ratio */
+/* pressure thresholds */
+#define PRESSURE_LOW (2 * DIM_PRESSURE / SN_PRESSURE)
+#define PRESSURE_HIGH (3 * PRESSURE_LOW)
+
/* device constants */
static const struct bcm5974_config bcm5974_config_table[] = {
{
0, cfg->y.dim, cfg->y.fuzz, 0);
__set_bit(EV_KEY, input_dev->evbit);
+ __set_bit(BTN_TOUCH, input_dev->keybit);
__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
const struct tp_finger *f = dev->tp_data->finger;
struct input_dev *input = dev->input;
const int fingers = (size - 26) / 28;
- int p = 0, w, x, y, n = 0;
+ int raw_p, raw_w, raw_x, raw_y;
+ int ptest = 0, origin = 0, nmin = 0, nmax = 0;
+ int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0;
if (size < 26 || (size - 26) % 28 != 0)
return -EIO;
+ /* always track the first finger; when detached, start over */
if (fingers) {
- p = raw2int(f->force_major);
- w = raw2int(f->size_major);
- x = raw2int(f->abs_x);
- y = raw2int(f->abs_y);
- n = p > 0 ? fingers : 0;
+ raw_p = raw2int(f->force_major);
+ raw_w = raw2int(f->size_major);
+ raw_x = raw2int(f->abs_x);
+ raw_y = raw2int(f->abs_y);
dprintk(9,
- "bcm5974: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n",
- p, w, x, y, n);
+ "bcm5974: raw: p: %+05d w: %+05d x: %+05d y: %+05d\n",
+ raw_p, raw_w, raw_x, raw_y);
+
+ ptest = int2bound(&c->p, raw_p);
+ origin = raw2int(f->origin);
+ }
- input_report_abs(input, ABS_TOOL_WIDTH, int2bound(&c->w, w));
- input_report_abs(input, ABS_X, int2bound(&c->x, x - c->x.devmin));
- input_report_abs(input, ABS_Y, int2bound(&c->y, c->y.devmax - y));
+ /* while tracking finger still valid, count all fingers */
+ if (ptest > PRESSURE_LOW && origin) {
+ abs_p = ptest;
+ abs_w = int2bound(&c->w, raw_w);
+ abs_x = int2bound(&c->x, raw_x - c->x.devmin);
+ abs_y = int2bound(&c->y, c->y.devmax - raw_y);
+ for (; f != dev->tp_data->finger + fingers; f++) {
+ ptest = int2bound(&c->p, raw2int(f->force_major));
+ if (ptest > PRESSURE_LOW)
+ nmax++;
+ if (ptest > PRESSURE_HIGH)
+ nmin++;
+ }
}
- input_report_abs(input, ABS_PRESSURE, int2bound(&c->p, p));
+ if (dev->fingers < nmin)
+ dev->fingers = nmin;
+ if (dev->fingers > nmax)
+ dev->fingers = nmax;
+
+ input_report_key(input, BTN_TOUCH, dev->fingers > 0);
+ input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1);
+ input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2);
+ input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2);
- input_report_key(input, BTN_TOOL_FINGER, n == 1);
- input_report_key(input, BTN_TOOL_DOUBLETAP, n == 2);
- input_report_key(input, BTN_TOOL_TRIPLETAP, n > 2);
+ input_report_abs(input, ABS_PRESSURE, abs_p);
+ input_report_abs(input, ABS_TOOL_WIDTH, abs_w);
+
+ if (abs_p) {
+ input_report_abs(input, ABS_X, abs_x);
+ input_report_abs(input, ABS_Y, abs_y);
+
+ dprintk(8,
+ "bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d "
+ "nmin: %d nmax: %d n: %d\n",
+ abs_p, abs_w, abs_x, abs_y, nmin, nmax, dev->fingers);
+
+ }
input_sync(input);
#define BCM5974_WELLSPRING_MODE_REQUEST_VALUE 0x300
#define BCM5974_WELLSPRING_MODE_REQUEST_INDEX 0
#define BCM5974_WELLSPRING_MODE_VENDOR_VALUE 0x01
+#define BCM5974_WELLSPRING_MODE_NORMAL_VALUE 0x08
-static int bcm5974_wellspring_mode(struct bcm5974 *dev)
+static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
{
char *data = kmalloc(8, GFP_KERNEL);
int retval = 0, size;
}
/* apply the mode switch */
- data[0] = BCM5974_WELLSPRING_MODE_VENDOR_VALUE;
+ data[0] = on ?
+ BCM5974_WELLSPRING_MODE_VENDOR_VALUE :
+ BCM5974_WELLSPRING_MODE_NORMAL_VALUE;
/* write configuration */
size = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
goto out;
}
- dprintk(2, "bcm5974: switched to wellspring mode.\n");
+ dprintk(2, "bcm5974: switched to %s mode.\n",
+ on ? "wellspring" : "normal");
out:
kfree(data);
*/
static int bcm5974_start_traffic(struct bcm5974 *dev)
{
- if (bcm5974_wellspring_mode(dev)) {
+ if (bcm5974_wellspring_mode(dev, true)) {
dprintk(1, "bcm5974: mode switch failed\n");
goto error;
}
{
usb_kill_urb(dev->tp_urb);
usb_kill_urb(dev->bt_urb);
+ bcm5974_wellspring_mode(dev, false);
}
/*
.ident = "Lenovo 3000 n100",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "076804U"),
},
},
{
input_dev->id.bustype = BUS_HOST;
input_dev->dev.parent = &pdev->dev;
- input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
input_set_abs_params(input_dev, ABS_X, 270, 3900, 0, 0);
input_set_abs_params(input_dev, ABS_Y, 180, 3700, 0, 0);
{
int ret;
+ /* Map the LED chip select address space */
+ latch_address = (unsigned short *) ioremap(IXP4XX_EXP_BUS_BASE(2), 512);
+ if (!latch_address) {
+ ret = -ENOMEM;
+ goto failremap;
+ }
+
+ latch_value = 0xffff;
+ *latch_address = latch_value;
+
ret = led_classdev_register(&pdev->dev, &fsg_wlan_led);
if (ret < 0)
goto failwlan;
if (ret < 0)
goto failring;
- /* Map the LED chip select address space */
- latch_address = (unsigned short *) ioremap(IXP4XX_EXP_BUS_BASE(2), 512);
- if (!latch_address) {
- ret = -ENOMEM;
- goto failremap;
- }
-
- latch_value = 0xffff;
- *latch_address = latch_value;
-
return ret;
- failremap:
- led_classdev_unregister(&fsg_ring_led);
failring:
led_classdev_unregister(&fsg_sync_led);
failsync:
failwan:
led_classdev_unregister(&fsg_wlan_led);
failwlan:
+ iounmap(latch_address);
+ failremap:
return ret;
}
static int fsg_led_remove(struct platform_device *pdev)
{
- iounmap(latch_address);
-
led_classdev_unregister(&fsg_wlan_led);
led_classdev_unregister(&fsg_wan_led);
led_classdev_unregister(&fsg_sata_led);
led_classdev_unregister(&fsg_sync_led);
led_classdev_unregister(&fsg_ring_led);
+ iounmap(latch_address);
+
return 0;
}
const struct i2c_device_id *id)
{
struct pca955x_led *pca955x;
- int i;
- int err = -ENODEV;
struct pca955x_chipdef *chip;
struct i2c_adapter *adapter;
struct led_platform_data *pdata;
+ int i, err;
chip = &pca955x_chipdefs[id->driver_data];
adapter = to_i2c_adapter(client->dev.parent);
}
}
+ pca955x = kzalloc(sizeof(*pca955x) * chip->bits, GFP_KERNEL);
+ if (!pca955x)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, pca955x);
+
for (i = 0; i < chip->bits; i++) {
- pca955x = kzalloc(sizeof(struct pca955x_led), GFP_KERNEL);
- if (!pca955x) {
- err = -ENOMEM;
- goto exit;
- }
+ pca955x[i].chipdef = chip;
+ pca955x[i].client = client;
+ pca955x[i].led_num = i;
- pca955x->chipdef = chip;
- pca955x->client = client;
- pca955x->led_num = i;
/* Platform data can specify LED names and default triggers */
if (pdata) {
if (pdata->leds[i].name)
- snprintf(pca955x->name, 32, "pca955x:%s",
- pdata->leds[i].name);
+ snprintf(pca955x[i].name,
+ sizeof(pca955x[i].name), "pca955x:%s",
+ pdata->leds[i].name);
if (pdata->leds[i].default_trigger)
- pca955x->led_cdev.default_trigger =
+ pca955x[i].led_cdev.default_trigger =
pdata->leds[i].default_trigger;
} else {
- snprintf(pca955x->name, 32, "pca955x:%d", i);
+ snprintf(pca955x[i].name, sizeof(pca955x[i].name),
+ "pca955x:%d", i);
}
- spin_lock_init(&pca955x->lock);
- pca955x->led_cdev.name = pca955x->name;
- pca955x->led_cdev.brightness_set =
- pca955x_led_set;
+ spin_lock_init(&pca955x[i].lock);
- /*
- * Client data is a pointer to the _first_ pca955x_led
- * struct
- */
- if (i == 0)
- i2c_set_clientdata(client, pca955x);
+ pca955x[i].led_cdev.name = pca955x[i].name;
+ pca955x[i].led_cdev.brightness_set = pca955x_led_set;
- INIT_WORK(&(pca955x->work), pca955x_led_work);
+ INIT_WORK(&pca955x[i].work, pca955x_led_work);
- led_classdev_register(&client->dev, &(pca955x->led_cdev));
+ err = led_classdev_register(&client->dev, &pca955x[i].led_cdev);
+ if (err < 0)
+ goto exit;
}
/* Turn off LEDs */
pca955x_write_psc(client, 1, 0);
return 0;
+
exit:
+ while (i--) {
+ led_classdev_unregister(&pca955x[i].led_cdev);
+ cancel_work_sync(&pca955x[i].work);
+ }
+
+ kfree(pca955x);
+ i2c_set_clientdata(client, NULL);
+
return err;
}
static int __devexit pca955x_remove(struct i2c_client *client)
{
struct pca955x_led *pca955x = i2c_get_clientdata(client);
- int leds = pca955x->chipdef->bits;
int i;
- for (i = 0; i < leds; i++) {
- led_classdev_unregister(&(pca955x->led_cdev));
- cancel_work_sync(&(pca955x->work));
- kfree(pca955x);
- pca955x = pca955x + 1;
+ for (i = 0; i < pca955x->chipdef->bits; i++) {
+ led_classdev_unregister(&pca955x[i].led_cdev);
+ cancel_work_sync(&pca955x[i].work);
}
+ kfree(pca955x);
+ i2c_set_clientdata(client, NULL);
+
return 0;
}
}
+static mdk_rdev_t *next_active_rdev(mdk_rdev_t *rdev, mddev_t *mddev)
+{
+ /* Iterate the disks of an mddev, using rcu to protect access to the
+ * linked list, and raising the refcount of devices we return to ensure
+ * they don't disappear while in use.
+ * As devices are only added or removed when raid_disk is < 0 and
+ * nr_pending is 0 and In_sync is clear, the entries we return will
+ * still be in the same position on the list when we re-enter
+ * list_for_each_continue_rcu.
+ */
+ struct list_head *pos;
+ rcu_read_lock();
+ if (rdev == NULL)
+ /* start at the beginning */
+ pos = &mddev->disks;
+ else {
+ /* release the previous rdev and start from there. */
+ rdev_dec_pending(rdev, mddev);
+ pos = &rdev->same_set;
+ }
+ list_for_each_continue_rcu(pos, &mddev->disks) {
+ rdev = list_entry(pos, mdk_rdev_t, same_set);
+ if (rdev->raid_disk >= 0 &&
+ test_bit(In_sync, &rdev->flags) &&
+ !test_bit(Faulty, &rdev->flags)) {
+ /* this is a usable devices */
+ atomic_inc(&rdev->nr_pending);
+ rcu_read_unlock();
+ return rdev;
+ }
+ }
+ rcu_read_unlock();
+ return NULL;
+}
+
static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait)
{
- mdk_rdev_t *rdev;
+ mdk_rdev_t *rdev = NULL;
mddev_t *mddev = bitmap->mddev;
- rcu_read_lock();
- rdev_for_each_rcu(rdev, mddev)
- if (test_bit(In_sync, &rdev->flags)
- && !test_bit(Faulty, &rdev->flags)) {
+ while ((rdev = next_active_rdev(rdev, mddev)) != NULL) {
int size = PAGE_SIZE;
if (page->index == bitmap->file_pages-1)
size = roundup(bitmap->last_page_size,
+ page->index * (PAGE_SIZE/512),
size,
page);
- }
- rcu_read_unlock();
+ }
if (wait)
md_super_wait(mddev);
const char *hw_handler_name;
struct work_struct activate_path;
+ struct pgpath *pgpath_to_activate;
unsigned nr_priority_groups;
struct list_head priority_groups;
unsigned pg_init_required; /* pg_init needs calling? */
static void free_pgpaths(struct list_head *pgpaths, struct dm_target *ti)
{
+ unsigned long flags;
struct pgpath *pgpath, *tmp;
struct multipath *m = ti->private;
if (m->hw_handler_name)
scsi_dh_detach(bdev_get_queue(pgpath->path.dev->bdev));
dm_put_device(ti, pgpath->path.dev);
+ spin_lock_irqsave(&m->lock, flags);
+ if (m->pgpath_to_activate == pgpath)
+ m->pgpath_to_activate = NULL;
+ spin_unlock_irqrestore(&m->lock, flags);
free_pgpath(pgpath);
}
}
__choose_pgpath(m);
pgpath = m->current_pgpath;
+ m->pgpath_to_activate = m->current_pgpath;
if ((pgpath && !m->queue_io) ||
(!pgpath && !m->queue_if_no_path))
int ret;
struct multipath *m =
container_of(work, struct multipath, activate_path);
- struct dm_path *path = &m->current_pgpath->path;
+ struct dm_path *path;
+ unsigned long flags;
+ spin_lock_irqsave(&m->lock, flags);
+ path = &m->pgpath_to_activate->path;
+ m->pgpath_to_activate = NULL;
+ spin_unlock_irqrestore(&m->lock, flags);
+ if (!path)
+ return;
ret = scsi_dh_activate(bdev_get_queue(path->dev->bdev));
pg_init_done(path, ret);
}
struct dm_table *map = dm_get_table(md);
struct dm_target *ti;
sector_t max_sectors;
- int max_size;
+ int max_size = 0;
if (unlikely(!map))
- return 0;
+ goto out;
ti = dm_table_find_target(map, bvm->bi_sector);
+ if (!dm_target_is_valid(ti))
+ goto out_table;
/*
* Find maximum amount of I/O that won't need splitting
if (max_size && ti->type->merge)
max_size = ti->type->merge(ti, bvm, biovec, max_size);
+out_table:
+ dm_table_put(map);
+
+out:
/*
* Always allow an entire first page
*/
if (max_size <= biovec->bv_len && !(bvm->bi_size >> SECTOR_SHIFT))
max_size = biovec->bv_len;
- dm_table_put(map);
-
return max_size;
}
del_timer_sync(&mddev->safemode_timer);
- invalidate_partition(disk, 0);
-
switch(mode) {
case 1: /* readonly */
err = -ENXIO;
* time 'round when curr_resync == 2
*/
continue;
- prepare_to_wait(&resync_wait, &wq, TASK_UNINTERRUPTIBLE);
+ /* We need to wait 'interruptible' so as not to
+ * contribute to the load average, and not to
+ * be caught by 'softlockup'
+ */
+ prepare_to_wait(&resync_wait, &wq, TASK_INTERRUPTIBLE);
if (!kthread_should_stop() &&
mddev2->curr_resync >= mddev->curr_resync) {
printk(KERN_INFO "md: delaying %s of %s"
" share one or more physical units)\n",
desc, mdname(mddev), mdname(mddev2));
mddev_put(mddev2);
+ if (signal_pending(current))
+ flush_signals(current);
schedule();
finish_wait(&resync_wait, &wq);
goto try_again;
{
v4l2_std_id *id = arg;
int found = 0;
- int i, err;
+ int i;
DEB_EE(("VIDIOC_S_STD\n"));
case VIDIOC_OVERLAY:
{
int on = *(int *)arg;
- int err = 0;
DEB_D(("VIDIOC_OVERLAY on:%d\n",on));
if (on != 0) {
case VIDIOCGMBUF:
{
struct video_mbuf *mbuf = arg;
- struct videobuf_queue *q;
int i;
/* fixme: number of capture buffers and sizes for v4l apps */
/*
* Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
MaxLinear MXL5005S VSB/QAM/DVBT tuner driver
Copyright (C) 2008 MaxLinear
- Copyright (C) 2006 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2006 Steven Toth <stoth@linuxtv.org>
Functions:
mxl5005s_reset()
mxl5005s_writereg()
/* ----------------------------------------------------------------
* Begin: Everything after here is new code to adapt the
* proprietary Realtek driver into a Linux API tuner.
- * Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
*/
static int mxl5005s_reset(struct dvb_frontend *fe)
{
MaxLinear MXL5005S VSB/QAM/DVBT tuner driver
Copyright (C) 2008 MaxLinear
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
static int simple_config_lookup(struct dvb_frontend *fe,
struct tuner_params *t_params,
- int *frequency, u8 *config, u8 *cb)
+ unsigned *frequency, u8 *config, u8 *cb)
{
struct tuner_simple_priv *priv = fe->tuner_priv;
int i;
priv->last_div = div;
if (t_params->has_tda9887) {
struct v4l2_priv_tun_config tda9887_cfg;
- int config = 0;
+ int tda_config = 0;
int is_secam_l = (params->std & (V4L2_STD_SECAM_L |
V4L2_STD_SECAM_LC)) &&
!(params->std & ~(V4L2_STD_SECAM_L |
V4L2_STD_SECAM_LC));
tda9887_cfg.tuner = TUNER_TDA9887;
- tda9887_cfg.priv = &config;
+ tda9887_cfg.priv = &tda_config;
if (params->std == V4L2_STD_SECAM_LC) {
if (t_params->port1_active ^ t_params->port1_invert_for_secam_lc)
- config |= TDA9887_PORT1_ACTIVE;
+ tda_config |= TDA9887_PORT1_ACTIVE;
if (t_params->port2_active ^ t_params->port2_invert_for_secam_lc)
- config |= TDA9887_PORT2_ACTIVE;
+ tda_config |= TDA9887_PORT2_ACTIVE;
} else {
if (t_params->port1_active)
- config |= TDA9887_PORT1_ACTIVE;
+ tda_config |= TDA9887_PORT1_ACTIVE;
if (t_params->port2_active)
- config |= TDA9887_PORT2_ACTIVE;
+ tda_config |= TDA9887_PORT2_ACTIVE;
}
if (t_params->intercarrier_mode)
- config |= TDA9887_INTERCARRIER;
+ tda_config |= TDA9887_INTERCARRIER;
if (is_secam_l) {
if (i == 0 && t_params->default_top_secam_low)
- config |= TDA9887_TOP(t_params->default_top_secam_low);
+ tda_config |= TDA9887_TOP(t_params->default_top_secam_low);
else if (i == 1 && t_params->default_top_secam_mid)
- config |= TDA9887_TOP(t_params->default_top_secam_mid);
+ tda_config |= TDA9887_TOP(t_params->default_top_secam_mid);
else if (t_params->default_top_secam_high)
- config |= TDA9887_TOP(t_params->default_top_secam_high);
+ tda_config |= TDA9887_TOP(t_params->default_top_secam_high);
} else {
if (i == 0 && t_params->default_top_low)
- config |= TDA9887_TOP(t_params->default_top_low);
+ tda_config |= TDA9887_TOP(t_params->default_top_low);
else if (i == 1 && t_params->default_top_mid)
- config |= TDA9887_TOP(t_params->default_top_mid);
+ tda_config |= TDA9887_TOP(t_params->default_top_mid);
else if (t_params->default_top_high)
- config |= TDA9887_TOP(t_params->default_top_high);
+ tda_config |= TDA9887_TOP(t_params->default_top_high);
}
if (t_params->default_pll_gating_18)
- config |= TDA9887_GATING_18;
+ tda_config |= TDA9887_GATING_18;
i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG,
&tda9887_cfg);
}
static struct tuner_params *t_params;
u8 config, cb;
u32 div;
- int ret, frequency = params->frequency / 62500;
+ int ret;
+ unsigned frequency = params->frequency / 62500;
t_params = simple_tuner_params(fe, TUNER_PARAM_TYPE_DIGITAL);
ret = simple_config_lookup(fe, t_params, &frequency, &config, &cb);
* Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
*
* Copyright (c) 2007 Xceive Corporation
- * Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
*
- * Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
*
- * Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
flexcop_diseqc_send_byte(fe, 0xff);
else {
flexcop_set_tone(fe, SEC_TONE_ON);
- udelay(12500);
+ mdelay(12);
+ udelay(500);
flexcop_set_tone(fe, SEC_TONE_OFF);
}
msleep(20);
fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM;
fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER;
- strncpy(fc->fc_i2c_adap[0].i2c_adap.name,
- "B2C2 FlexCop I2C to demod", I2C_NAME_SIZE);
- strncpy(fc->fc_i2c_adap[1].i2c_adap.name,
- "B2C2 FlexCop I2C to eeprom", I2C_NAME_SIZE);
- strncpy(fc->fc_i2c_adap[2].i2c_adap.name,
- "B2C2 FlexCop I2C to tuner", I2C_NAME_SIZE);
+ strlcpy(fc->fc_i2c_adap[0].i2c_adap.name, "B2C2 FlexCop I2C to demod",
+ sizeof(fc->fc_i2c_adap[0].i2c_adap.name));
+ strlcpy(fc->fc_i2c_adap[1].i2c_adap.name, "B2C2 FlexCop I2C to eeprom",
+ sizeof(fc->fc_i2c_adap[1].i2c_adap.name));
+ strlcpy(fc->fc_i2c_adap[2].i2c_adap.name, "B2C2 FlexCop I2C to tuner",
+ sizeof(fc->fc_i2c_adap[2].i2c_adap.name));
i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]);
i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]);
goto error;
}
if (state->type_flags & DST_TYPE_HAS_FW_1)
- udelay(3000);
+ mdelay(3);
if (read_dst(state, &reply, GET_ACK)) {
dprintk(verbose, DST_DEBUG, 1, "Trying to recover.. ");
if ((dst_error_recovery(state)) < 0) {
if (len >= 2 && data[0] == 0 && (data[1] == 1 || data[1] == 3))
goto error;
if (state->type_flags & DST_TYPE_HAS_FW_1)
- udelay(3000);
+ mdelay(3);
else
udelay(2000);
if (!dst_wait_dst_ready(state, NO_DELAY))
struct timespec timeout = { 0 };
struct dmx_pes_filter_params *para = &filter->params.pes;
dmx_output_t otype;
- int ret;
int ts_type;
enum dmx_ts_pes ts_pes;
struct dmx_ts_feed **tsfeed = &filter->feed.ts;
/* we need this extra check for annoying interfaces like the budget-av */
if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
(ca->pub->poll_slot_status)) {
- int status = ca->pub->poll_slot_status(ca->pub, slot, 0);
+ status = ca->pub->poll_slot_status(ca->pub, slot, 0);
if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
dvb_ca_en50221_thread_update_delay(ca);
/* we need this extra check for annoying interfaces like the budget-av */
if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
(ca->pub->poll_slot_status)) {
- int status = ca->pub->poll_slot_status(ca->pub, slot, 0);
+ status = ca->pub->poll_slot_status(ca->pub, slot, 0);
if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
dvb_ca_en50221_thread_update_delay(ca);
* initialization, so parg is 8 bits and does not
* include the initialization or start bit
*/
- unsigned long cmd = ((unsigned long) parg) << 1;
+ unsigned long swcmd = ((unsigned long) parg) << 1;
struct timeval nexttime;
struct timeval tv[10];
int i;
u8 last = 1;
if (dvb_frontend_debug)
- printk("%s switch command: 0x%04lx\n", __func__, cmd);
+ printk("%s switch command: 0x%04lx\n", __func__, swcmd);
do_gettimeofday(&nexttime);
if (dvb_frontend_debug)
memcpy(&tv[0], &nexttime, sizeof(struct timeval));
for (i = 0; i < 9; i++) {
if (dvb_frontend_debug)
do_gettimeofday(&tv[i + 1]);
- if ((cmd & 0x01) != last) {
+ if ((swcmd & 0x01) != last) {
/* set voltage to (last ? 13V : 18V) */
fe->ops.set_voltage(fe, (last) ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18);
last = (last) ? 0 : 1;
}
- cmd = cmd >> 1;
+ swcmd = swcmd >> 1;
if (i != 8)
dvb_frontend_sleep_until(&nexttime, 8000);
}
if (d->state == DVB_USB_STATE_INIT &&
usb_set_interface(d->udev, 0, 0) < 0)
err("set interface failed");
- do; while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) &&
+ do {} while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) &&
!(ret = cxusb_ctrl_msg(d, 0x15, NULL, 0, NULL, 0)) &&
!(ret = cxusb_ctrl_msg(d, 0x17, NULL, 0, NULL, 0)) && 0);
if (!ret) {
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) },
{ USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
- { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
+/* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
+ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) },
{ 0 } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
}
},
- .num_device_descs = 3,
+ .num_device_descs = 4,
.devices = {
{ "DiBcom STK7070PD reference design",
{ &dib0700_usb_id_table[17], NULL },
{ "Hauppauge Nova-TD Stick (52009)",
{ &dib0700_usb_id_table[35], NULL },
{ NULL },
+ },
+ { "Hauppauge Nova-TD-500 (84xxx)",
+ { &dib0700_usb_id_table[36], NULL },
+ { NULL },
}
}
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
#define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301
#define USB_PID_HAUPPAUGE_NOVA_T_500 0x9941
#define USB_PID_HAUPPAUGE_NOVA_T_500_2 0x9950
+#define USB_PID_HAUPPAUGE_NOVA_T_500_3 0x8400
#define USB_PID_HAUPPAUGE_NOVA_T_STICK 0x7050
#define USB_PID_HAUPPAUGE_NOVA_T_STICK_2 0x7060
#define USB_PID_HAUPPAUGE_NOVA_T_STICK_3 0x7070
/*
Auvitek AU8522 QAM/8VSB demodulator driver
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
return ret;
}
+static int au8522_set_if(struct dvb_frontend *fe, enum au8522_if_freq if_freq)
+{
+ struct au8522_state *state = fe->demodulator_priv;
+ u8 r0b5, r0b6, r0b7;
+ char *ifmhz;
+
+ switch (if_freq) {
+ case AU8522_IF_3_25MHZ:
+ ifmhz = "3.25";
+ r0b5 = 0x00;
+ r0b6 = 0x3d;
+ r0b7 = 0xa0;
+ break;
+ case AU8522_IF_4MHZ:
+ ifmhz = "4.00";
+ r0b5 = 0x00;
+ r0b6 = 0x4b;
+ r0b7 = 0xd9;
+ break;
+ case AU8522_IF_6MHZ:
+ ifmhz = "6.00";
+ r0b5 = 0xfb;
+ r0b6 = 0x8e;
+ r0b7 = 0x39;
+ break;
+ default:
+ dprintk("%s() IF Frequency not supported\n", __func__);
+ return -EINVAL;
+ }
+ dprintk("%s() %s MHz\n", __func__, ifmhz);
+ au8522_writereg(state, 0x80b5, r0b5);
+ au8522_writereg(state, 0x80b6, r0b6);
+ au8522_writereg(state, 0x80b7, r0b7);
+
+ return 0;
+}
+
/* VSB Modulation table */
static struct {
u16 reg;
{ 0x80af, 0x66 },
{ 0x821b, 0xcc },
{ 0x821d, 0x80 },
- { 0x80b5, 0xfb },
- { 0x80b6, 0x8e },
- { 0x80b7, 0x39 },
{ 0x80a4, 0xe8 },
{ 0x8231, 0x13 },
};
{ 0x80a4, 0x00 },
{ 0x8081, 0xc4 },
{ 0x80a5, 0x40 },
- { 0x80b5, 0xfb },
- { 0x80b6, 0x8e },
- { 0x80b7, 0x39 },
{ 0x80aa, 0x77 },
{ 0x80ad, 0x77 },
{ 0x80a6, 0x67 },
au8522_writereg(state,
VSB_mod_tab[i].reg,
VSB_mod_tab[i].data);
+ au8522_set_if(fe, state->config->vsb_if);
break;
case QAM_64:
case QAM_256:
au8522_writereg(state,
QAM_mod_tab[i].reg,
QAM_mod_tab[i].data);
+ au8522_set_if(fe, state->config->qam_if);
break;
default:
dprintk("%s() Invalid modulation\n", __func__);
/*
Auvitek AU8522 QAM/8VSB demodulator driver
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
#include <linux/dvb/frontend.h>
+enum au8522_if_freq {
+ AU8522_IF_6MHZ = 0,
+ AU8522_IF_4MHZ,
+ AU8522_IF_3_25MHZ,
+};
+
struct au8522_config {
/* the demodulator's i2c address */
u8 demod_address;
#define AU8522_TUNERLOCKING 0
#define AU8522_DEMODLOCKING 1
u8 status_mode;
+
+ enum au8522_if_freq vsb_if;
+ enum au8522_if_freq qam_if;
};
#if defined(CONFIG_DVB_AU8522) || \
Copyright (C) 2001-2002 Convergence Integrated Media GmbH
Holger Waechtler <holger@convergence.de>
- Copyright (C) 2004 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2004 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
Copyright (C) 2001-2002 Convergence Integrated Media GmbH
Holger Waechtler <holger@convergence.de>
- Copyright (C) 2004 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2004 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
/*
* Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver
*
- * Copyright (C) 2005 Steven Toth <stoth@hauppauge.com>
+ * Copyright (C) 2005 Steven Toth <stoth@linuxtv.org>
*
* Support for KWorld DVB-S 100 by Vadim Catana <skystar@moldova.cc>
*
if (config->dont_use_pll)
cx24123_repeater_mode(state, 1, 0);
- strncpy(state->tuner_i2c_adapter.name,
- "CX24123 tuner I2C bus", I2C_NAME_SIZE);
+ strlcpy(state->tuner_i2c_adapter.name, "CX24123 tuner I2C bus",
+ sizeof(state->tuner_i2c_adapter.name));
state->tuner_i2c_adapter.class = I2C_CLASS_TV_DIGITAL,
state->tuner_i2c_adapter.algo = &cx24123_tuner_i2c_algo;
state->tuner_i2c_adapter.algo_data = NULL;
/*
Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver
- Copyright (C) 2005 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2005 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
/*
Samsung S5H1409 VSB/QAM demodulator driver
- Copyright (C) 2006 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2006 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
break;
case QAM_64:
case QAM_256:
+ case QAM_AUTO:
dprintk("%s() QAM_AUTO (64/256)\n", __func__);
if (state->if_freq != S5H1409_QAM_IF_FREQ)
s5h1409_set_if_freq(fe, S5H1409_QAM_IF_FREQ);
/*
Samsung S5H1409 VSB/QAM demodulator driver
- Copyright (C) 2006 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2006 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
/*
Samsung S5H1411 VSB/QAM demodulator driver
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
break;
case QAM_64:
case QAM_256:
+ case QAM_AUTO:
dprintk("%s() QAM_AUTO (64/256)\n", __func__);
s5h1411_set_if_freq(fe, state->config->qam_if);
s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x00, 0x0171);
/*
Samsung S5H1411 VSB/QAM demodulator driver
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
state->frontend.demodulator_priv = state;
/* create tuner i2c adapter */
- strncpy(state->tuner_i2c_adapter.name, "S5H1420-PN1010 tuner I2C bus", I2C_NAME_SIZE);
+ strlcpy(state->tuner_i2c_adapter.name, "S5H1420-PN1010 tuner I2C bus",
+ sizeof(state->tuner_i2c_adapter.name));
state->tuner_i2c_adapter.class = I2C_CLASS_TV_DIGITAL,
state->tuner_i2c_adapter.algo = &s5h1420_tuner_i2c_algo;
state->tuner_i2c_adapter.algo_data = NULL;
/*
NXP TDA10048HN DVB OFDM demodulator driver
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
if (fw->size != TDA10048_DEFAULT_FIRMWARE_SIZE) {
printk(KERN_ERR "%s: firmware incorrect size\n", __func__);
- return -EIO;
+ ret = -EIO;
} else {
printk(KERN_INFO "%s: firmware uploading\n", __func__);
/*
NXP TDA10048HN DVB OFDM demodulator driver
- Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
* Copyright (c) 2008 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3 as
+ * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS IS"
* Copyright (c) 2008 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3 as
+ * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS IS"
* Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3 as
+ * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS IS"
* Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3 as
+ * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS IS"
* Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3 as
+ * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS IS"
* Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3 as
+ * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS IS"
DiseqcSendByte(budget, 0xff);
else {
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
- udelay(12500);
+ mdelay(12);
+ udelay(500);
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
}
msleep(20);
DiseqcSendByte(budget, 0xff);
else {
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
- udelay(12500);
+ mdelay(12);
+ udelay(500);
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
}
msleep(20);
# Makefile for the kernel character device drivers.
#
-miropcm20-objs := miropcm20-rds-core.o miropcm20-radio.o
-
obj-$(CONFIG_RADIO_AZTECH) += radio-aztech.o
obj-$(CONFIG_RADIO_RTRACK2) += radio-rtrack2.o
obj-$(CONFIG_RADIO_SF16FMI) += radio-sf16fmi.o
obj-$(CONFIG_RADIO_MAXIRADIO) += radio-maxiradio.o
obj-$(CONFIG_RADIO_RTRACK) += radio-aimslab.o
obj-$(CONFIG_RADIO_ZOLTRIX) += radio-zoltrix.o
-obj-$(CONFIG_RADIO_MIROPCM20) += miropcm20.o
-obj-$(CONFIG_RADIO_MIROPCM20_RDS) += miropcm20-rds.o
obj-$(CONFIG_RADIO_GEMTEK) += radio-gemtek.o
obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o
obj-$(CONFIG_RADIO_TRUST) += radio-trust.o
radio->usbdev = interface_to_usbdev(intf);
radio->curfreq = FREQ_MIN*FREQ_MUL;
video_set_drvdata(radio->videodev, radio);
- if (video_register_device(radio->videodev, VFL_TYPE_RADIO,radio_nr)) {
+ if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr) < 0) {
warn("Could not register video device");
video_device_release(radio->videodev);
kfree(radio->transfer_buffer);
+++ /dev/null
-/* Miro PCM20 radio driver for Linux radio support
- * (c) 1998 Ruurd Reitsma <R.A.Reitsma@wbmt.tudelft.nl>
- * Thanks to Norberto Pellici for the ACI device interface specification
- * The API part is based on the radiotrack driver by M. Kirkwood
- * This driver relies on the aci mixer (drivers/sound/aci.c)
- * Look there for further info...
- */
-
-/* Revision history:
- *
- * 1998 Ruurd Reitsma <R.A.Reitsma@wbmt.tudelft.nl>
- * 2000-09-05 Robert Siemer <Robert.Siemer@gmx.de>
- * removed unfinished volume control (maybe adding it later again)
- * use OSS-mixer; added stereo control
- */
-
-/* What ever you think about the ACI, version 0x07 is not very well!
- * I can't get frequency, 'tuner status', 'tuner flags' or mute/mono
- * conditions... Robert
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include "oss/aci.h"
-#include "miropcm20-rds-core.h"
-
-static int radio_nr = -1;
-module_param(radio_nr, int, 0);
-
-struct pcm20_device {
- unsigned long freq;
- int muted;
- int stereo;
-};
-
-
-static int pcm20_mute(struct pcm20_device *dev, unsigned char mute)
-{
- dev->muted = mute;
- return aci_write_cmd(ACI_SET_TUNERMUTE, mute);
-}
-
-static int pcm20_stereo(struct pcm20_device *dev, unsigned char stereo)
-{
- dev->stereo = stereo;
- return aci_write_cmd(ACI_SET_TUNERMONO, !stereo);
-}
-
-static int pcm20_setfreq(struct pcm20_device *dev, unsigned long freq)
-{
- unsigned char freql;
- unsigned char freqh;
-
- dev->freq=freq;
-
- freq /= 160;
- if (!(aci_version==0x07 || aci_version>=0xb0))
- freq /= 10; /* I don't know exactly which version
- * needs this hack */
- freql = freq & 0xff;
- freqh = freq >> 8;
-
- aci_rds_cmd(RDS_RESET, NULL, 0);
- pcm20_stereo(dev, 1);
-
- return aci_rw_cmd(ACI_WRITE_TUNE, freql, freqh);
-}
-
-static int pcm20_getflags(struct pcm20_device *dev, __u32 *flags, __u16 *signal)
-{
- /* okay, check for signal, stereo and rds here... */
- int i;
- unsigned char buf;
-
- if ((i=aci_rw_cmd(ACI_READ_TUNERSTATION, -1, -1))<0)
- return i;
- pr_debug("check_sig: 0x%x\n", i);
- if (i & 0x80) {
- /* no signal from tuner */
- *flags=0;
- *signal=0;
- return 0;
- } else
- *signal=0xffff;
-
- if ((i=aci_rw_cmd(ACI_READ_TUNERSTEREO, -1, -1))<0)
- return i;
- if (i & 0x40) {
- *flags=0;
- } else {
- /* stereo */
- *flags=VIDEO_TUNER_STEREO_ON;
- /* I can't see stereo, when forced to mono */
- dev->stereo=1;
- }
-
- if ((i=aci_rds_cmd(RDS_STATUS, &buf, 1))<0)
- return i;
- if (buf & 1)
- /* RDS available */
- *flags|=VIDEO_TUNER_RDS_ON;
- else
- return 0;
-
- if ((i=aci_rds_cmd(RDS_RXVALUE, &buf, 1))<0)
- return i;
- pr_debug("rds-signal: %d\n", buf);
- if (buf > 15) {
- printk("miropcm20-radio: RX strengths unexpected high...\n");
- buf=15;
- }
- /* refine signal */
- if ((*signal=SCALE(15, 0xffff, buf))==0)
- *signal = 1;
-
- return 0;
-}
-
-static int pcm20_do_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, void *arg)
-{
- struct video_device *dev = video_devdata(file);
- struct pcm20_device *pcm20 = dev->priv;
- int i;
-
- switch(cmd)
- {
- case VIDIOCGCAP:
- {
- struct video_capability *v = arg;
- memset(v,0,sizeof(*v));
- v->type=VID_TYPE_TUNER;
- strcpy(v->name, "Miro PCM20");
- v->channels=1;
- v->audios=1;
- return 0;
- }
- case VIDIOCGTUNER:
- {
- struct video_tuner *v = arg;
- if(v->tuner) /* Only 1 tuner */
- return -EINVAL;
- v->rangelow=87*16000;
- v->rangehigh=108*16000;
- pcm20_getflags(pcm20, &v->flags, &v->signal);
- v->flags|=VIDEO_TUNER_LOW;
- v->mode=VIDEO_MODE_AUTO;
- strcpy(v->name, "FM");
- return 0;
- }
- case VIDIOCSTUNER:
- {
- struct video_tuner *v = arg;
- if(v->tuner!=0)
- return -EINVAL;
- /* Only 1 tuner so no setting needed ! */
- return 0;
- }
- case VIDIOCGFREQ:
- {
- unsigned long *freq = arg;
- *freq = pcm20->freq;
- return 0;
- }
- case VIDIOCSFREQ:
- {
- unsigned long *freq = arg;
- pcm20->freq = *freq;
- i=pcm20_setfreq(pcm20, pcm20->freq);
- pr_debug("First view (setfreq): 0x%x\n", i);
- return i;
- }
- case VIDIOCGAUDIO:
- {
- struct video_audio *v = arg;
- memset(v,0, sizeof(*v));
- v->flags=VIDEO_AUDIO_MUTABLE;
- if (pcm20->muted)
- v->flags|=VIDEO_AUDIO_MUTE;
- v->mode=VIDEO_SOUND_STEREO;
- if (pcm20->stereo)
- v->mode|=VIDEO_SOUND_MONO;
- /* v->step=2048; */
- strcpy(v->name, "Radio");
- return 0;
- }
- case VIDIOCSAUDIO:
- {
- struct video_audio *v = arg;
- if(v->audio)
- return -EINVAL;
-
- pcm20_mute(pcm20, !!(v->flags&VIDEO_AUDIO_MUTE));
- if(v->flags&VIDEO_SOUND_MONO)
- pcm20_stereo(pcm20, 0);
- if(v->flags&VIDEO_SOUND_STEREO)
- pcm20_stereo(pcm20, 1);
-
- return 0;
- }
- default:
- return -ENOIOCTLCMD;
- }
-}
-
-static int pcm20_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- return video_usercopy(inode, file, cmd, arg, pcm20_do_ioctl);
-}
-
-static struct pcm20_device pcm20_unit = {
- .freq = 87*16000,
- .muted = 1,
-};
-
-static const struct file_operations pcm20_fops = {
- .owner = THIS_MODULE,
- .open = video_exclusive_open,
- .release = video_exclusive_release,
- .ioctl = pcm20_ioctl,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = v4l_compat_ioctl32,
-#endif
- .llseek = no_llseek,
-};
-
-static struct video_device pcm20_radio = {
- .name = "Miro PCM 20 radio",
- .fops = &pcm20_fops,
- .priv = &pcm20_unit
-};
-
-static int __init pcm20_init(void)
-{
- if(video_register_device(&pcm20_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- goto video_register_device;
-
- if(attach_aci_rds()<0)
- goto attach_aci_rds;
-
- printk(KERN_INFO "Miro PCM20 radio card driver.\n");
-
- return 0;
-
- attach_aci_rds:
- video_unregister_device(&pcm20_radio);
- video_register_device:
- return -EINVAL;
-}
-
-MODULE_AUTHOR("Ruurd Reitsma");
-MODULE_DESCRIPTION("A driver for the Miro PCM20 radio card.");
-MODULE_LICENSE("GPL");
-
-static void __exit pcm20_cleanup(void)
-{
- unload_aci_rds();
- video_unregister_device(&pcm20_radio);
-}
-
-module_init(pcm20_init);
-module_exit(pcm20_cleanup);
+++ /dev/null
-/*
- * Many thanks to Fred Seidel <seidel@metabox.de>, the
- * designer of the RDS decoder hardware. With his help
- * I was able to code this driver.
- * Thanks also to Norberto Pellicci, Dominic Mounteney
- * <DMounteney@pinnaclesys.com> and www.teleauskunft.de
- * for good hints on finding Fred. It was somewhat hard
- * to locate him here in Germany... [:
- *
- * Revision history:
- *
- * 2000-08-09 Robert Siemer <Robert.Siemer@gmx.de>
- * RDS support for MiroSound PCM20 radio
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-
-#include <asm/io.h>
-#include "oss/aci.h"
-#include "miropcm20-rds-core.h"
-
-#define DEBUG 0
-
-static struct mutex aci_rds_mutex;
-
-#define RDS_DATASHIFT 2 /* Bit 2 */
-#define RDS_DATAMASK (1 << RDS_DATASHIFT)
-#define RDS_BUSYMASK 0x10 /* Bit 4 */
-#define RDS_CLOCKMASK 0x08 /* Bit 3 */
-
-#define RDS_DATA(x) (((x) >> RDS_DATASHIFT) & 1)
-
-
-#if DEBUG
-static void print_matrix(char array[], unsigned int length)
-{
- int i, j;
-
- for (i=0; i<length; i++) {
- printk(KERN_DEBUG "aci-rds: ");
- for (j=7; j>=0; j--) {
- printk("%d", (array[i] >> j) & 0x1);
- }
- if (i%8 == 0)
- printk(" byte-border\n");
- else
- printk("\n");
- }
-}
-#endif /* DEBUG */
-
-static int byte2trans(unsigned char byte, unsigned char sendbuffer[], int size)
-{
- int i;
-
- if (size != 8)
- return -1;
- for (i = 7; i >= 0; i--)
- sendbuffer[7-i] = (byte & (1 << i)) ? RDS_DATAMASK : 0;
- sendbuffer[0] |= RDS_CLOCKMASK;
-
- return 0;
-}
-
-static int rds_waitread(void)
-{
- unsigned char byte;
- int i=2000;
-
- do {
- byte=inb(RDS_REGISTER);
- i--;
- }
- while ((byte & RDS_BUSYMASK) && i);
-
- if (i) {
- #if DEBUG
- printk(KERN_DEBUG "rds_waitread()");
- print_matrix(&byte, 1);
- #endif
- return (byte);
- } else {
- printk(KERN_WARNING "aci-rds: rds_waitread() timeout...\n");
- return -1;
- }
-}
-
-/* don't use any ..._nowait() function if you are not sure what you do... */
-
-static inline void rds_rawwrite_nowait(unsigned char byte)
-{
- #if DEBUG
- printk(KERN_DEBUG "rds_rawwrite()");
- print_matrix(&byte, 1);
- #endif
- outb(byte, RDS_REGISTER);
-}
-
-static int rds_rawwrite(unsigned char byte)
-{
- if (rds_waitread() >= 0) {
- rds_rawwrite_nowait(byte);
- return 0;
- } else
- return -1;
-}
-
-static int rds_write(unsigned char cmd)
-{
- unsigned char sendbuffer[8];
- int i;
-
- if (byte2trans(cmd, sendbuffer, 8) != 0){
- return -1;
- } else {
- for (i=0; i<8; i++) {
- rds_rawwrite(sendbuffer[i]);
- }
- }
- return 0;
-}
-
-static int rds_readcycle_nowait(void)
-{
- rds_rawwrite_nowait(0);
- return rds_waitread();
-}
-
-static int rds_readcycle(void)
-{
- if (rds_rawwrite(0) < 0)
- return -1;
- return rds_waitread();
-}
-
-static int rds_read(unsigned char databuffer[], int datasize)
-{
- #define READSIZE (8*datasize)
-
- int i,j;
-
- if (datasize < 1) /* nothing to read */
- return 0;
-
- /* to be able to use rds_readcycle_nowait()
- I have to waitread() here */
- if (rds_waitread() < 0)
- return -1;
-
- memset(databuffer, 0, datasize);
-
- for (i=0; i< READSIZE; i++)
- if((j=rds_readcycle_nowait()) < 0) {
- return -1;
- } else {
- databuffer[i/8]|=(RDS_DATA(j) << (7-(i%8)));
- }
-
- return 0;
-}
-
-static int rds_ack(void)
-{
- int i=rds_readcycle();
-
- if (i < 0)
- return -1;
- if (i & RDS_DATAMASK) {
- return 0; /* ACK */
- } else {
- printk(KERN_DEBUG "aci-rds: NACK\n");
- return 1; /* NACK */
- }
-}
-
-int aci_rds_cmd(unsigned char cmd, unsigned char databuffer[], int datasize)
-{
- int ret;
-
- if (mutex_lock_interruptible(&aci_rds_mutex))
- return -EINTR;
-
- rds_write(cmd);
-
- /* RDS_RESET doesn't need further processing */
- if (cmd!=RDS_RESET && (rds_ack() || rds_read(databuffer, datasize)))
- ret = -1;
- else
- ret = 0;
-
- mutex_unlock(&aci_rds_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL(aci_rds_cmd);
-
-int __init attach_aci_rds(void)
-{
- mutex_init(&aci_rds_mutex);
- return 0;
-}
-
-void __exit unload_aci_rds(void)
-{
-}
-MODULE_LICENSE("GPL");
+++ /dev/null
-#ifndef _MIROPCM20_RDS_CORE_H_
-#define _MIROPCM20_RDS_CORE_H_
-
-extern int aci_rds_cmd(unsigned char cmd, unsigned char databuffer[], int datasize);
-
-#define RDS_STATUS 0x01
-#define RDS_STATIONNAME 0x02
-#define RDS_TEXT 0x03
-#define RDS_ALTFREQ 0x04
-#define RDS_TIMEDATE 0x05
-#define RDS_PI_CODE 0x06
-#define RDS_PTYTATP 0x07
-#define RDS_RESET 0x08
-#define RDS_RXVALUE 0x09
-
-extern void __exit unload_aci_rds(void);
-extern int __init attach_aci_rds(void);
-
-#endif /* _MIROPCM20_RDS_CORE_H_ */
+++ /dev/null
-/* MiroSOUND PCM20 radio rds interface driver
- * (c) 2001 Robert Siemer <Robert.Siemer@gmx.de>
- * Thanks to Fred Seidel. See miropcm20-rds-core.c for further information.
- */
-
-/* Revision history:
- *
- * 2001-04-18 Robert Siemer <Robert.Siemer@gmx.de>
- * separate file for user interface driver
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/smp_lock.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <linux/delay.h>
-#include <asm/uaccess.h>
-#include "miropcm20-rds-core.h"
-
-static char * text_buffer;
-static int rds_users;
-
-
-static int rds_f_open(struct inode *in, struct file *fi)
-{
- if (rds_users)
- return -EBUSY;
-
- lock_kernel();
- rds_users++;
- if ((text_buffer=kmalloc(66, GFP_KERNEL)) == 0) {
- rds_users--;
- printk(KERN_NOTICE "aci-rds: Out of memory by open()...\n");
- unlock_kernel();
- return -ENOMEM;
- }
-
- unlock_kernel();
- return 0;
-}
-
-static int rds_f_release(struct inode *in, struct file *fi)
-{
- kfree(text_buffer);
-
- rds_users--;
- return 0;
-}
-
-static void print_matrix(char *ch, char out[])
-{
- int j;
-
- for (j=7; j>=0; j--) {
- out[7-j] = ((*ch >> j) & 0x1) + '0';
- }
-}
-
-static ssize_t rds_f_read(struct file *file, char __user *buffer, size_t length, loff_t *offset)
-{
-// i = sprintf(text_buffer, "length: %d, offset: %d\n", length, *offset);
-
- char c;
- char bits[8];
-
- msleep(2000);
- aci_rds_cmd(RDS_STATUS, &c, 1);
- print_matrix(&c, bits);
- if (copy_to_user(buffer, bits, 8))
- return -EFAULT;
-
-/* if ((c >> 3) & 1) {
- aci_rds_cmd(RDS_STATIONNAME, text_buffer+1, 8);
- text_buffer[0] = ' ' ;
- text_buffer[9] = '\n';
- return copy_to_user(buffer+8, text_buffer, 10) ? -EFAULT: 18;
- }
-*/
-/* if ((c >> 6) & 1) {
- aci_rds_cmd(RDS_PTYTATP, &c, 1);
- if ( c & 1)
- sprintf(text_buffer, " M");
- else
- sprintf(text_buffer, " S");
- if ((c >> 1) & 1)
- sprintf(text_buffer+2, " TA");
- else
- sprintf(text_buffer+2, " --");
- if ((c >> 7) & 1)
- sprintf(text_buffer+5, " TP");
- else
- sprintf(text_buffer+5, " --");
- sprintf(text_buffer+8, " %2d\n", (c >> 2) & 0x1f);
- return copy_to_user(buffer+8, text_buffer, 12) ? -EFAULT: 20;
- }
-*/
-
- if ((c >> 4) & 1) {
- aci_rds_cmd(RDS_TEXT, text_buffer, 65);
- text_buffer[0] = ' ' ;
- text_buffer[65] = '\n';
- return copy_to_user(buffer+8, text_buffer,66) ? -EFAULT : 66+8;
- } else {
- put_user('\n', buffer+8);
- return 9;
- }
-}
-
-static const struct file_operations rds_fops = {
- .owner = THIS_MODULE,
- .read = rds_f_read,
- .open = rds_f_open,
- .release = rds_f_release
-};
-
-static struct miscdevice rds_miscdev = {
- .minor = MISC_DYNAMIC_MINOR,
- .name = "radiotext",
- .fops = &rds_fops,
-};
-
-static int __init miropcm20_rds_init(void)
-{
- return misc_register(&rds_miscdev);
-}
-
-static void __exit miropcm20_rds_cleanup(void)
-{
- misc_deregister(&rds_miscdev);
-}
-
-module_init(miropcm20_rds_init);
-module_exit(miropcm20_rds_cleanup);
-MODULE_LICENSE("GPL");
rtrack_radio.priv=&rtrack_unit;
- if(video_register_device(&rtrack_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- {
+ if (video_register_device(&rtrack_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io, 2);
return -EINVAL;
}
mutex_init(&lock);
aztech_radio.priv=&aztech_unit;
- if(video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- {
+ if (video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io,2);
return -EINVAL;
}
}
if (!request_region(io,2,"cadet"))
goto fail;
- if(video_register_device(&cadet_radio,VFL_TYPE_RADIO,radio_nr)==-1) {
+ if (video_register_device(&cadet_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io,2);
goto fail;
}
}
*devradio = vdev_template;
- if ( video_register_device( devradio, VFL_TYPE_RADIO , nr_radio) == -1 ) {
+ if (video_register_device(devradio, VFL_TYPE_RADIO, nr_radio) < 0) {
kfree( devradio );
goto err_video;
}
gemtek_radio.priv = &gemtek_unit;
- if (video_register_device(&gemtek_radio, VFL_TYPE_RADIO,
- radio_nr) == -1) {
+ if (video_register_device(&gemtek_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io, 1);
return -EBUSY;
}
video_set_drvdata(maestro_radio_inst, radio_unit);
pci_set_drvdata(pdev, maestro_radio_inst);
- retval = video_register_device(maestro_radio_inst, VFL_TYPE_RADIO,
- radio_nr);
+ retval = video_register_device(maestro_radio_inst, VFL_TYPE_RADIO, radio_nr);
if (retval) {
printk(KERN_ERR "can't register video device!\n");
goto errfr1;
{
unsigned long int si;
int bl;
- int data = FREQ2BITS(freq);
+ int val = FREQ2BITS(freq);
/* TEA5757 shift register bits (see pdf) */
- outbit(0,io); // 24 search
- outbit(1,io); // 23 search up/down
+ outbit(0, io); /* 24 search */
+ outbit(1, io); /* 23 search up/down */
- outbit(0,io); // 22 stereo/mono
+ outbit(0, io); /* 22 stereo/mono */
- outbit(0,io); // 21 band
- outbit(0,io); // 20 band (only 00=FM works I think)
+ outbit(0, io); /* 21 band */
+ outbit(0, io); /* 20 band (only 00=FM works I think) */
- outbit(0,io); // 19 port ?
- outbit(0,io); // 18 port ?
+ outbit(0, io); /* 19 port ? */
+ outbit(0, io); /* 18 port ? */
- outbit(0,io); // 17 search level
- outbit(0,io); // 16 search level
+ outbit(0, io); /* 17 search level */
+ outbit(0, io); /* 16 search level */
si = 0x8000;
- for (bl = 1; bl <= 16 ; bl++) {
- outbit(data & si,io);
- si >>=1;
+ for (bl = 1; bl <= 16; bl++) {
+ outbit(val & si, io);
+ si >>= 1;
}
dprintk(1, "Radio freq set to %d.%02d MHz\n",
mutex_init(&radio_unit.lock);
maxiradio_radio.priv = &radio_unit;
- if (video_register_device(&maxiradio_radio, VFL_TYPE_RADIO, radio_nr)==-1) {
+ if (video_register_device(&maxiradio_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
printk("radio-maxiradio: can't register device!");
goto err_out_free_region;
}
rtrack2_radio.priv=&rtrack2_unit;
spin_lock_init(&lock);
- if(video_register_device(&rtrack2_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- {
+ if (video_register_device(&rtrack2_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io, 4);
return -EINVAL;
}
mutex_init(&lock);
- if (video_register_device(&fmi_radio, VFL_TYPE_RADIO, radio_nr) == -1) {
+ if (video_register_device(&fmi_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io, 2);
return -EINVAL;
}
INIT_DELAYED_WORK(&radio->work, si470x_work);
/* register video device */
- if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr)) {
- retval = -EIO;
+ retval = video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr);
+ if (retval) {
printk(KERN_WARNING DRIVER_NAME
": Could not register video device\n");
goto err_all;
spin_lock_init(&lock);
- if(video_register_device(&terratec_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- {
+ if (video_register_device(&terratec_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io,2);
return -EINVAL;
}
printk(KERN_ERR "trust: port 0x%x already in use\n", io);
return -EBUSY;
}
- if(video_register_device(&trust_radio, VFL_TYPE_RADIO, radio_nr)==-1)
- {
+ if (video_register_device(&trust_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io, 2);
return -EINVAL;
}
return -EBUSY;
}
- if (video_register_device(&zoltrix_radio, VFL_TYPE_RADIO, radio_nr) == -1)
- {
+ if (video_register_device(&zoltrix_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
release_region(io, 2);
return -EINVAL;
}
config VIDEO_SH_MOBILE_CEU
tristate "SuperH Mobile CEU Interface driver"
- depends on VIDEO_DEV
+ depends on VIDEO_DEV && HAS_DMA
select SOC_CAMERA
select VIDEOBUF_DMA_CONTIG
---help---
obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o
endif
+obj-$(CONFIG_VIDEO_TUNER) += tuner.o
+
obj-$(CONFIG_VIDEO_BT848) += bt8xx/
obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o
obj-$(CONFIG_VIDEO_DPC) += dpc7146.o
obj-$(CONFIG_TUNER_3036) += tuner-3036.o
-obj-$(CONFIG_VIDEO_TUNER) += tuner.o
-
obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o
obj-$(CONFIG_VIDEOBUF_DMA_CONTIG) += videobuf-dma-contig.o
select DVB_AU8522 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_MXL5007T if !DVB_FE_CUSTOMIZE
+ select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
---help---
This is a video4linux driver for Auvitek's USB device.
/*
* Driver for the Auvitek USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
[AU0828_BOARD_DVICO_FUSIONHDTV7] = {
.name = "DViCO FusionHDTV USB",
},
+ [AU0828_BOARD_HAUPPAUGE_WOODBURY] = {
+ .name = "Hauppauge Woodbury",
+ },
};
/* Tuner callback function for au0828 boards. Currently only needed
case AU0828_BOARD_HAUPPAUGE_HVR850:
case AU0828_BOARD_HAUPPAUGE_HVR950Q:
case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+ case AU0828_BOARD_HAUPPAUGE_WOODBURY:
if (dev->i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0xa0);
break;
case AU0828_BOARD_HAUPPAUGE_HVR850:
case AU0828_BOARD_HAUPPAUGE_HVR950Q:
case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+ case AU0828_BOARD_HAUPPAUGE_WOODBURY:
/* GPIO's
* 4 - CS5340
* 5 - AU8522 Demodulator
.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
{ USB_DEVICE(0x2040, 0x7281),
.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
+ { USB_DEVICE(0x2040, 0x8200),
+ .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
{ },
};
/*
* Driver for the Auvitek USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define AU0828_BOARD_HAUPPAUGE_HVR850 2
#define AU0828_BOARD_DVICO_FUSIONHDTV7 3
#define AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL 4
+#define AU0828_BOARD_HAUPPAUGE_WOODBURY 5
/*
* Driver for the Auvitek USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
module_exit(au0828_exit);
MODULE_DESCRIPTION("Driver for Auvitek AU0828 based products");
-MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>");
+MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
MODULE_LICENSE("GPL");
/*
* Driver for the Auvitek USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include "au8522.h"
#include "xc5000.h"
#include "mxl5007t.h"
+#include "tda18271.h"
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
static struct au8522_config hauppauge_hvr950q_config = {
.demod_address = 0x8e >> 1,
.status_mode = AU8522_DEMODLOCKING,
+ .qam_if = AU8522_IF_6MHZ,
+ .vsb_if = AU8522_IF_6MHZ,
+};
+
+static struct au8522_config hauppauge_woodbury_config = {
+ .demod_address = 0x8e >> 1,
+ .status_mode = AU8522_DEMODLOCKING,
+ .qam_if = AU8522_IF_4MHZ,
+ .vsb_if = AU8522_IF_3_25MHZ,
};
static struct xc5000_config hauppauge_hvr950q_tunerconfig = {
.if_freq_hz = MxL_IF_6_MHZ,
};
+static struct tda18271_config hauppauge_woodbury_tunerconfig = {
+ .gate = TDA18271_GATE_DIGITAL,
+};
+
/*-------------------------------------------------------------------*/
static void urb_completion(struct urb *purb)
{
&dev->i2c_adap, 0x60,
&mxl5007t_hvr950q_config);
break;
+ case AU0828_BOARD_HAUPPAUGE_WOODBURY:
+ dvb->frontend = dvb_attach(au8522_attach,
+ &hauppauge_woodbury_config,
+ &dev->i2c_adap);
+ if (dvb->frontend != NULL)
+ dvb_attach(tda18271_attach, dvb->frontend,
+ 0x60, &dev->i2c_adap,
+ &hauppauge_woodbury_tunerconfig);
+ break;
default:
printk(KERN_WARNING "The frontend of your DVB/ATSC card "
"isn't supported yet\n");
/*
* Driver for the Auvitek AU0828 USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Auvitek USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Auvitek AU0828 USB bridge
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
static void flyvideo_gpio(struct bttv *btv)
{
- int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
- int tuner=UNSET,ttype;
+ int gpio, has_remote, has_radio, is_capture_only;
+ int is_lr90, has_tda9820_tda9821;
+ int tuner_type = UNSET, ttype;
gpio_inout(0xffffff, 0);
udelay(8); /* without this we would see the 0x1800 mask */
* xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
* Note: Some bits are Audio_Mask !
*/
- ttype=(gpio&0x0f0000)>>16;
- switch(ttype) {
- case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
+ ttype = (gpio & 0x0f0000) >> 16;
+ switch (ttype) {
+ case 0x0:
+ tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */
break;
- case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
+ case 0x2:
+ tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
break;
- case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
+ case 0x4:
+ tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
break;
- case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
+ case 0x6:
+ tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
break;
- case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
+ case 0xC:
+ tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
break;
default:
printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
+ break;
}
has_remote = gpio & 0x800000;
/*
* gpio & 0x001000 output bit for audio routing */
- if(is_capture_only)
- tuner = TUNER_ABSENT; /* No tuner present */
+ if (is_capture_only)
+ tuner_type = TUNER_ABSENT; /* No tuner present */
printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
- btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
+ btv->c.nr, has_radio ? "yes" : "no ",
+ has_remote ? "yes" : "no ", tuner_type, gpio);
printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
- btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
- is_capture_only?"yes":"no ");
+ btv->c.nr, is_lr90 ? "yes" : "no ",
+ has_tda9820_tda9821 ? "yes" : "no ",
+ is_capture_only ? "yes" : "no ");
- if (tuner != UNSET) /* only set if known tuner autodetected, else let insmod option through */
- btv->tuner_type = tuner;
+ if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
+ btv->tuner_type = tuner_type;
btv->has_radio = has_radio;
/* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
* LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
* Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
- if(has_tda9820_tda9821) btv->audio_mode_gpio = lt9415_audio;
+ if (has_tda9820_tda9821)
+ btv->audio_mode_gpio = lt9415_audio;
/* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
}
static void __devinit avermedia_eeprom(struct bttv *btv)
{
- int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
+ int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
tuner_make = (eeprom_data[0x41] & 0x7);
tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
btv->has_remote = (eeprom_data[0x42] & 0x01);
if (tuner_make == 0 || tuner_make == 2)
- if(tuner_format <=0x0a)
- tuner = tuner_0_table[tuner_format];
+ if (tuner_format <= 0x0a)
+ tuner_type = tuner_0_table[tuner_format];
if (tuner_make == 1)
- if(tuner_format <=9)
- tuner = tuner_1_table[tuner_format];
+ if (tuner_format <= 9)
+ tuner_type = tuner_1_table[tuner_format];
if (tuner_make == 4)
- if(tuner_format == 0x09)
- tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
+ if (tuner_format == 0x09)
+ tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
- btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
- if(tuner) {
- btv->tuner_type=tuner;
- printk("%d",tuner);
+ btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
+ if (tuner_type) {
+ btv->tuner_type = tuner_type;
+ printk(KERN_CONT "%d", tuner_type);
} else
- printk("Unknown type");
- printk(" radio:%s remote control:%s\n",
+ printk(KERN_CONT "Unknown type");
+ printk(KERN_CONT " radio:%s remote control:%s\n",
tuner_tv_fm ? "yes" : "no",
btv->has_remote ? "yes" : "no");
}
gpio_inout(mask,mask);
gpio_bits(mask,0);
- udelay(2500);
+ mdelay(2);
+ udelay(500);
gpio_bits(mask,mask);
if (bttv_gpio)
static unsigned int uv_ratio = 50;
static unsigned int full_luma_range;
static unsigned int coring;
-extern int no_overlay;
/* API features (turn on/off stuff for testing) */
static unsigned int v4l2 = 1;
const struct bttv_format *fmt, struct bttv_overlay *ov,
int skip_even, int skip_odd)
{
- int dwords,rc,line,maxy,start,end,skip,nskips;
+ int dwords, rc, line, maxy, start, end;
+ unsigned skip, nskips;
struct btcx_skiplist *skips;
__le32 *rp;
u32 ri,ra;
int bttv_sub_add_device(struct bttv_core *core, char *name);
int bttv_sub_del_devices(struct bttv_core *core);
+/* ---------------------------------------------------------- */
+/* bttv-cards.c */
+
+extern int no_overlay;
+
/* ---------------------------------------------------------- */
/* bttv-driver.c */
}
void
-btcx_calc_skips(int line, int width, unsigned int *maxy,
+btcx_calc_skips(int line, int width, int *maxy,
struct btcx_skiplist *skips, unsigned int *nskips,
const struct v4l2_clip *clips, unsigned int nclips)
{
unsigned int clip,skip;
- int end,maxline;
+ int end, maxline;
skip=0;
maxline = 9999;
int btcx_align(struct v4l2_rect *win, struct v4l2_clip *clips,
unsigned int n, int mask);
void btcx_sort_clips(struct v4l2_clip *clips, unsigned int nclips);
-void btcx_calc_skips(int line, int width, unsigned int *maxy,
+void btcx_calc_skips(int line, int width, int *maxy,
struct btcx_skiplist *skips, unsigned int *nskips,
const struct v4l2_clip *clips, unsigned int nclips);
printk(KERN_INFO "Connectix Quickcam on %s\n", qcam->pport->name);
- if(video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1)
- {
+ if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
parport_unregister_device(qcam->pdev);
kfree(qcam);
return -ENODEV;
parport_release(qcam->pdev);
- if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1)
- {
+ if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
printk(KERN_ERR "Unable to register Colour QuickCam on %s\n",
qcam->pport->name);
parport_unregister_device(qcam->pdev);
camera->lowlevel_data = lowlevel;
/* register v4l device */
- if (video_register_device(&camera->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+ if (video_register_device(&camera->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
kfree(camera);
printk(KERN_DEBUG "video_register_device failed\n");
return NULL;
if(cam->params.pnp_id.device_type == DEVICE_STV_672 &&
cam->params.version.sensor_flags==CPIA2_VP_SENSOR_FLAGS_500){
// Maximum 15fps
- int i;
for(i=0; i<c->maximum; ++i) {
if(framerate_controls[i].value ==
CPIA2_VP_FRAMERATE_15) {
reset_camera_struct_v4l(cam);
/* register v4l device */
- if (video_register_device
- (cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+ if (video_register_device(cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
ERR("video_register_device failed\n");
video_device_release(cam->vdev);
return -ENODEV;
u32 v;
const u8 *ptr;
int i;
- int retries = 0;
+ int retries1 = 0;
if (request_firmware(&fw, FWFILE, &cx->dev->dev) != 0) {
CX18_ERR("unable to open firmware %s\n", FWFILE);
/* The firmware load often has byte errors, so allow for several
retries, both at byte level and at the firmware load level. */
- while (retries < 5) {
+ while (retries1 < 5) {
cx18_av_write4(cx, CXADEC_CHIP_CTRL, 0x00010000);
cx18_av_write(cx, CXADEC_STD_DET_CTL, 0xf6);
for (i = 0; i < size; i++) {
u32 dl_control = 0x0F000000 | i | ((u32)ptr[i] << 16);
u32 value = 0;
- int retries;
+ int retries2;
- for (retries = 0; retries < 5; retries++) {
+ for (retries2 = 0; retries2 < 5; retries2++) {
cx18_av_write4(cx, CXADEC_DL_CTL, dl_control);
udelay(10);
value = cx18_av_read4(cx, CXADEC_DL_CTL);
the address. We can only write the lower
address byte of the address. */
if ((value & 0x3F00) != (dl_control & 0x3F00)) {
- retries = 5;
+ retries2 = 5;
break;
}
}
- if (retries >= 5)
+ if (retries2 >= 5)
break;
}
if (i == size)
break;
- retries++;
+ retries1++;
}
- if (retries >= 5) {
+ if (retries1 >= 5) {
CX18_ERR("unable to load firmware %s\n", FWFILE);
release_firmware(fw);
return -EIO;
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1 };
-static int cardtype_c = 1;
-static int tuner_c = 1;
-static int radio_c = 1;
+static unsigned cardtype_c = 1;
+static unsigned tuner_c = 1;
+static unsigned radio_c = 1;
static char pal[] = "--";
static char secam[] = "--";
static char ntsc[] = "-";
/*
* cx18 functions for DVB support
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* cx18 functions for DVB support
*
- * Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
CX18_WARN("Ack struct = %d for %s\n",
mb->args[2], s->name);
id = read_enc(off);
- buf = cx18_queue_find_buf(s, id, read_enc(off + 4));
+ buf = cx18_queue_get_buf_irq(s, id, read_enc(off + 4));
CX18_DEBUG_HI_DMA("DMA DONE for %s (buffer %d)\n", s->name, id);
if (buf) {
cx18_buf_sync_for_cpu(s, buf);
return buf;
}
-struct cx18_buffer *cx18_queue_find_buf(struct cx18_stream *s, u32 id,
+struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id,
u32 bytesused)
{
struct cx18 *cx = s->cx;
struct list_head *p;
+ spin_lock(&s->qlock);
list_for_each(p, &s->q_free.list) {
struct cx18_buffer *buf =
list_entry(p, struct cx18_buffer, list);
continue;
buf->bytesused = bytesused;
/* the transport buffers are handled differently,
- so there is no need to move them to the full queue */
- if (s->type == CX18_ENC_STREAM_TYPE_TS)
- return buf;
- s->q_free.buffers--;
- s->q_free.length -= s->buf_size;
- s->q_full.buffers++;
- s->q_full.length += s->buf_size;
- s->q_full.bytesused += buf->bytesused;
- list_move_tail(&buf->list, &s->q_full.list);
+ they are not moved to the full queue */
+ if (s->type != CX18_ENC_STREAM_TYPE_TS) {
+ s->q_free.buffers--;
+ s->q_free.length -= s->buf_size;
+ s->q_full.buffers++;
+ s->q_full.length += s->buf_size;
+ s->q_full.bytesused += buf->bytesused;
+ list_move_tail(&buf->list, &s->q_full.list);
+ }
+ spin_unlock(&s->qlock);
return buf;
}
+ spin_unlock(&s->qlock);
CX18_ERR("Cannot find buffer %d for stream %s\n", id, s->name);
return NULL;
}
-static void cx18_queue_move_buf(struct cx18_stream *s, struct cx18_queue *from,
- struct cx18_queue *to, int clear, int full)
-{
- struct cx18_buffer *buf =
- list_entry(from->list.next, struct cx18_buffer, list);
-
- list_move_tail(from->list.next, &to->list);
- from->buffers--;
- from->length -= s->buf_size;
- from->bytesused -= buf->bytesused - buf->readpos;
- /* special handling for q_free */
- if (clear)
- buf->bytesused = buf->readpos = buf->b_flags = 0;
- else if (full) {
- /* special handling for stolen buffers, assume
- all bytes are used. */
- buf->bytesused = s->buf_size;
- buf->readpos = buf->b_flags = 0;
- }
- to->buffers++;
- to->length += s->buf_size;
- to->bytesused += buf->bytesused - buf->readpos;
-}
-
-/* Move 'needed_bytes' worth of buffers from queue 'from' into queue 'to'.
- If 'needed_bytes' == 0, then move all buffers from 'from' into 'to'.
- If 'steal' != NULL, then buffers may also taken from that queue if
- needed.
-
- The buffer is automatically cleared if it goes to the free queue. It is
- also cleared if buffers need to be taken from the 'steal' queue and
- the 'from' queue is the free queue.
-
- When 'from' is q_free, then needed_bytes is compared to the total
- available buffer length, otherwise needed_bytes is compared to the
- bytesused value. For the 'steal' queue the total available buffer
- length is always used.
-
- -ENOMEM is returned if the buffers could not be obtained, 0 if all
- buffers where obtained from the 'from' list and if non-zero then
- the number of stolen buffers is returned. */
-static int cx18_queue_move(struct cx18_stream *s, struct cx18_queue *from,
- struct cx18_queue *steal, struct cx18_queue *to,
- int needed_bytes)
+/* Move all buffers of a queue to q_free, while flushing the buffers */
+static void cx18_queue_flush(struct cx18_stream *s, struct cx18_queue *q)
{
unsigned long flags;
- int rc = 0;
- int from_free = from == &s->q_free;
- int to_free = to == &s->q_free;
- int bytes_available;
-
- spin_lock_irqsave(&s->qlock, flags);
- if (needed_bytes == 0) {
- from_free = 1;
- needed_bytes = from->length;
- }
-
- bytes_available = from_free ? from->length : from->bytesused;
- bytes_available += steal ? steal->length : 0;
+ struct cx18_buffer *buf;
- if (bytes_available < needed_bytes) {
- spin_unlock_irqrestore(&s->qlock, flags);
- return -ENOMEM;
- }
- if (from_free) {
- u32 old_length = to->length;
+ if (q == &s->q_free)
+ return;
- while (to->length - old_length < needed_bytes) {
- if (list_empty(&from->list))
- from = steal;
- if (from == steal)
- rc++; /* keep track of 'stolen' buffers */
- cx18_queue_move_buf(s, from, to, 1, 0);
- }
- } else {
- u32 old_bytesused = to->bytesused;
-
- while (to->bytesused - old_bytesused < needed_bytes) {
- if (list_empty(&from->list))
- from = steal;
- if (from == steal)
- rc++; /* keep track of 'stolen' buffers */
- cx18_queue_move_buf(s, from, to, to_free, rc);
- }
+ spin_lock_irqsave(&s->qlock, flags);
+ while (!list_empty(&q->list)) {
+ buf = list_entry(q->list.next, struct cx18_buffer, list);
+ list_move_tail(q->list.next, &s->q_free.list);
+ buf->bytesused = buf->readpos = buf->b_flags = 0;
+ s->q_free.buffers++;
+ s->q_free.length += s->buf_size;
}
+ cx18_queue_init(q);
spin_unlock_irqrestore(&s->qlock, flags);
- return rc;
}
void cx18_flush_queues(struct cx18_stream *s)
{
- cx18_queue_move(s, &s->q_io, NULL, &s->q_free, 0);
- cx18_queue_move(s, &s->q_full, NULL, &s->q_free, 0);
+ cx18_queue_flush(s, &s->q_io);
+ cx18_queue_flush(s, &s->q_full);
}
int cx18_stream_alloc(struct cx18_stream *s)
s->name, s->buffers, s->buf_size,
s->buffers * s->buf_size / 1024);
- if (((char *)&cx->scb->cpu_mdl[cx->mdl_offset + s->buffers] -
- (char *)cx->scb) > SCB_RESERVED_SIZE) {
- unsigned bufsz = (((char *)cx->scb) + SCB_RESERVED_SIZE -
- ((char *)cx->scb->cpu_mdl));
+ if (((char __iomem *)&cx->scb->cpu_mdl[cx->mdl_offset + s->buffers] -
+ (char __iomem *)cx->scb) > SCB_RESERVED_SIZE) {
+ unsigned bufsz = (((char __iomem *)cx->scb) + SCB_RESERVED_SIZE -
+ ((char __iomem *)cx->scb->cpu_mdl));
CX18_ERR("Too many buffers, cannot fit in SCB area\n");
CX18_ERR("Max buffers = %zd\n",
void cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf,
struct cx18_queue *q);
struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q);
-struct cx18_buffer *cx18_queue_find_buf(struct cx18_stream *s, u32 id,
+struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id,
u32 bytesused);
void cx18_flush_queues(struct cx18_stream *s);
*
* (c) 2004 Jelle Foks <jelle@foks.8m.com>
* (c) 2004 Gerd Knorr <kraxel@bytesex.org>
- * (c) 2008 Steven Toth <stoth@hauppauge.com>
+ * (c) 2008 Steven Toth <stoth@linuxtv.org>
* - CX23885/7/8 support
*
* Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include "cx23885.h"
MODULE_DESCRIPTION("Driver for cx23885 based TV cards");
-MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>");
+MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
MODULE_LICENSE("GPL");
static unsigned int debug;
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#endif
MODULE_DESCRIPTION("v4l2 driver module for cx23885 based TV cards");
-MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>");
+MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
MODULE_LICENSE("GPL");
/* ------------------------------------------------------------------ */
/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* NTSC sliced VBI support by Christopher Neufeld <television@cneufeld.ca>
* with additional fixes by Hans Verkuil <hverkuil@xs4all.nl>.
*
- * CX23885 support by Steven Toth <stoth@hauppauge.com>.
+ * CX23885 support by Steven Toth <stoth@linuxtv.org>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
ret = request_firmware(&fw, "dabusb/bitstream.bin", &s->usbdev->dev);
if (ret) {
err("Failed to load \"dabusb/bitstream.bin\": %d\n", ret);
+ kfree(b);
return ret;
}
cam->v4ldev->fops = &et61x251_fops;
cam->v4ldev->minor = video_nr[dev_nr];
cam->v4ldev->release = video_device_release;
+ cam->v4ldev->parent = &udev->dev;
video_set_drvdata(cam->v4ldev, cam);
init_completion(&cam->probe);
struct usb_device *dev = gspca_dev->dev;
#ifdef GSPCA_DEBUG
- if (len > sizeof gspca_dev->usb_buf) {
+ if (len > USB_BUF_SZ) {
err("reg_r: buffer overflow");
return;
}
struct usb_device *dev = gspca_dev->dev;
#ifdef GSPCA_DEBUG
- if (len > sizeof gspca_dev->usb_buf) {
+ if (len > USB_BUF_SZ) {
err("reg_w: buffer overflow");
return;
}
reg_w_val(gspca_dev, 0x0000, 0x00);
/* wait for completion */
retry = 50;
- while (retry--) {
+ do {
reg_r(gspca_dev, 0x0002, 1);
/* 0x07 until 0x00 */
if (gspca_dev->usb_buf[0] == 0x00)
break;
reg_w_val(gspca_dev, 0x0053, 0x00);
- }
+ } while (--retry);
if (retry == 0)
PDEBUG(D_ERR, "Damned Errors sending jpeg Table");
/* send the qtable now */
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
cx11646_init1(gspca_dev);
cx11646_initsize(gspca_dev);
cx11646_jpeg(gspca_dev);
}
-static void sd_stopN(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_stop0(struct gspca_dev *gspca_dev)
{
int retry = 50;
reg_w_val(gspca_dev, 0x00fc, 0xe0);
}
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
- .stopN = sd_stopN,
.stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
.set = sd_setcontrast,
.get = sd_getcontrast,
},
+#define COLOR_IDX 2
{
{
.id = V4L2_CID_SATURATION,
struct usb_device *dev = gspca_dev->dev;
#ifdef GSPCA_DEBUG
- if (len > sizeof gspca_dev->usb_buf) {
+ if (len > USB_BUF_SZ) {
err("reg_r: buffer overflow");
return;
}
struct usb_device *dev = gspca_dev->dev;
#ifdef GSPCA_DEBUG
- if (len > sizeof gspca_dev->usb_buf) {
+ if (len > USB_BUF_SZ) {
err("reg_w: buffer overflow");
return;
}
} else {
cam->cam_mode = vga_mode;
cam->nmodes = sizeof vga_mode / sizeof vga_mode[0];
+ gspca_dev->ctrl_dis = (1 << COLOR_IDX);
}
sd->brightness = BRIGHTNESS_DEF;
sd->contrast = CONTRAST_DEF;
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
et_video(gspca_dev, 0); /* video off */
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static __u8 Et_getgainG(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
.dq_callback = do_autogain,
};
/* -- module initialisation -- */
static __devinitdata struct usb_device_id device_table[] = {
-#ifndef CONFIG_USB_ET61X251
{USB_DEVICE(0x102c, 0x6151), .driver_info = SENSOR_PAS106},
-#endif
+#if !defined CONFIG_USB_ET61X251 && !defined CONFIG_USB_ET61X251_MODULE
{USB_DEVICE(0x102c, 0x6251), .driver_info = SENSOR_TAS5130CXX},
+#endif
{}
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
cam_pkt_op pkt_scan;
if (urb->status != 0) {
- PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
+#ifdef CONFIG_PM
+ if (!gspca_dev->frozen)
+#endif
+ PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
return; /* disconnection ? */
}
pkt_scan = gspca_dev->sd_desc->pkt_scan;
gspca_dev->streaming = 0;
atomic_set(&gspca_dev->nevent, 0);
if (gspca_dev->present) {
- gspca_dev->sd_desc->stopN(gspca_dev);
+ if (gspca_dev->sd_desc->stopN)
+ gspca_dev->sd_desc->stopN(gspca_dev);
destroy_urbs(gspca_dev);
gspca_set_alt0(gspca_dev);
- gspca_dev->sd_desc->stop0(gspca_dev);
+ if (gspca_dev->sd_desc->stop0)
+ gspca_dev->sd_desc->stop0(gspca_dev);
PDEBUG(D_STREAM, "stream off OK");
}
}
goto out;
}
- /* if not done yet, initialize the sensor */
- if (gspca_dev->users == 0) {
- if (mutex_lock_interruptible(&gspca_dev->usb_lock)) {
- ret = -ERESTARTSYS;
- goto out;
- }
- ret = gspca_dev->sd_desc->open(gspca_dev);
- mutex_unlock(&gspca_dev->usb_lock);
- if (ret != 0) {
- PDEBUG(D_ERR|D_CONF, "init device failed %d", ret);
- goto out;
- }
- } else if (gspca_dev->users > 4) { /* (arbitrary value) */
+ if (gspca_dev->users > 4) { /* (arbitrary value) */
ret = -EBUSY;
goto out;
}
else
gspca_dev->vdev.debug &= ~3;
#endif
+ ret = 0;
out:
mutex_unlock(&gspca_dev->queue_lock);
if (ret != 0)
/* if the file did the capture, free the streaming resources */
if (gspca_dev->capt_file == file) {
- mutex_lock(&gspca_dev->usb_lock);
- if (gspca_dev->streaming)
+ if (gspca_dev->streaming) {
+ mutex_lock(&gspca_dev->usb_lock);
gspca_stream_off(gspca_dev);
- gspca_dev->sd_desc->close(gspca_dev);
- mutex_unlock(&gspca_dev->usb_lock);
+ mutex_unlock(&gspca_dev->usb_lock);
+ }
frame_free(gspca_dev);
gspca_dev->capt_file = NULL;
gspca_dev->memory = GSPCA_MEMORY_NO;
return 0;
}
-/* the use of V4L2_CTRL_FLAG_NEXT_CTRL asks for the controls to be sorted */
static int vidioc_queryctrl(struct file *file, void *priv,
struct v4l2_queryctrl *q_ctrl)
{
struct gspca_dev *gspca_dev = priv;
- int i;
+ int i, ix;
u32 id;
+ ix = -1;
id = q_ctrl->id;
if (id & V4L2_CTRL_FLAG_NEXT_CTRL) {
id &= V4L2_CTRL_ID_MASK;
id++;
for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
- if (id >= gspca_dev->sd_desc->ctrls[i].qctrl.id) {
- memcpy(q_ctrl,
- &gspca_dev->sd_desc->ctrls[i].qctrl,
- sizeof *q_ctrl);
- return 0;
+ if (gspca_dev->sd_desc->ctrls[i].qctrl.id < id)
+ continue;
+ if (ix < 0) {
+ ix = i;
+ continue;
}
+ if (gspca_dev->sd_desc->ctrls[i].qctrl.id
+ > gspca_dev->sd_desc->ctrls[ix].qctrl.id)
+ continue;
+ ix = i;
}
- return -EINVAL;
}
for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
if (id == gspca_dev->sd_desc->ctrls[i].qctrl.id) {
- memcpy(q_ctrl,
- &gspca_dev->sd_desc->ctrls[i].qctrl,
- sizeof *q_ctrl);
- return 0;
+ ix = i;
+ break;
}
}
- if (id >= V4L2_CID_BASE
- && id <= V4L2_CID_LASTP1) {
+ if (ix < 0)
+ return -EINVAL;
+ memcpy(q_ctrl, &gspca_dev->sd_desc->ctrls[ix].qctrl,
+ sizeof *q_ctrl);
+ if (gspca_dev->ctrl_dis & (1 << ix))
q_ctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
- return 0;
- }
- return -EINVAL;
+ return 0;
}
static int vidioc_s_ctrl(struct file *file, void *priv,
i++, ctrls++) {
if (ctrl->id != ctrls->qctrl.id)
continue;
+ if (gspca_dev->ctrl_dis & (1 << i))
+ return -EINVAL;
if (ctrl->value < ctrls->qctrl.minimum
|| ctrl->value > ctrls->qctrl.maximum)
return -ERANGE;
i++, ctrls++) {
if (ctrl->id != ctrls->qctrl.id)
continue;
+ if (gspca_dev->ctrl_dis & (1 << i))
+ return -EINVAL;
if (mutex_lock_interruptible(&gspca_dev->usb_lock))
return -ERESTARTSYS;
ret = ctrls->get(gspca_dev, &ctrl->value);
i = ret; /* frame index */
frame = &gspca_dev->frame[i];
if (gspca_dev->memory == V4L2_MEMORY_USERPTR) {
- if (copy_to_user((__u8 *) frame->v4l2_buf.m.userptr,
+ if (copy_to_user((__u8 __user *) frame->v4l2_buf.m.userptr,
frame->data,
frame->v4l2_buf.bytesused)) {
PDEBUG(D_ERR|D_STREAM,
err("couldn't kzalloc gspca struct");
return -EIO;
}
+ gspca_dev->usb_buf = kmalloc(USB_BUF_SZ, GFP_KERNEL);
+ if (!gspca_dev->usb_buf) {
+ err("out of memory");
+ ret = -EIO;
+ goto out;
+ }
gspca_dev->dev = dev;
gspca_dev->iface = interface->bInterfaceNumber;
gspca_dev->nbalt = intf->num_altsetting;
/* gspca_dev->users = 0; (done by kzalloc) */
gspca_dev->nbufread = 2;
- /* configure the subdriver */
+ /* configure the subdriver and initialize the USB device */
ret = gspca_dev->sd_desc->config(gspca_dev, id);
+ if (ret < 0)
+ goto out;
+ ret = gspca_dev->sd_desc->init(gspca_dev);
if (ret < 0)
goto out;
ret = gspca_set_alt0(gspca_dev);
PDEBUG(D_PROBE, "probe ok");
return 0;
out:
+ kfree(gspca_dev->usb_buf);
kfree(gspca_dev);
return ret;
}
/* We don't want people trying to open up the device */
video_unregister_device(&gspca_dev->vdev);
/* Free the memory */
+ kfree(gspca_dev->usb_buf);
kfree(gspca_dev);
PDEBUG(D_PROBE, "disconnect complete");
}
EXPORT_SYMBOL(gspca_disconnect);
+#ifdef CONFIG_PM
+int gspca_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+
+ if (!gspca_dev->streaming)
+ return 0;
+ gspca_dev->frozen = 1; /* avoid urb error messages */
+ if (gspca_dev->sd_desc->stopN)
+ gspca_dev->sd_desc->stopN(gspca_dev);
+ destroy_urbs(gspca_dev);
+ gspca_set_alt0(gspca_dev);
+ if (gspca_dev->sd_desc->stop0)
+ gspca_dev->sd_desc->stop0(gspca_dev);
+ return 0;
+}
+EXPORT_SYMBOL(gspca_suspend);
+
+int gspca_resume(struct usb_interface *intf)
+{
+ struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+
+ gspca_dev->frozen = 0;
+ gspca_dev->sd_desc->init(gspca_dev);
+ if (gspca_dev->streaming)
+ return gspca_init_transfer(gspca_dev);
+ return 0;
+}
+EXPORT_SYMBOL(gspca_resume);
+#endif
/* -- cam driver utility functions -- */
/* auto gain and exposure algorithm based on the knee algorithm described here:
/* device information - set at probe time */
struct cam {
- char *dev_name;
struct v4l2_pix_format *cam_mode; /* size nmodes */
char nmodes;
__u8 epaddr;
/* controls */
const struct ctrl *ctrls;
int nctrls;
-/* operations */
+/* mandatory operations */
cam_cf_op config; /* called on probe */
- cam_op open; /* called on open */
+ cam_op init; /* called on probe and resume */
cam_v_op start; /* called on stream on */
- cam_v_op stopN; /* called on stream off - main alt */
- cam_v_op stop0; /* called on stream off - alt 0 */
- cam_v_op close; /* called on close */
cam_pkt_op pkt_scan;
/* optional operations */
+ cam_v_op stopN; /* called on stream off - main alt */
+ cam_v_op stop0; /* called on stream off - alt 0 */
cam_v_op dq_callback; /* called when a frame has been dequeued */
cam_jpg_op get_jcomp;
cam_jpg_op set_jcomp;
struct cam cam; /* device information */
const struct sd_desc *sd_desc; /* subdriver description */
+ unsigned ctrl_dis; /* disabled controls (bit map) */
- __u8 usb_buf[8]; /* buffer for USB exchanges */
+#define USB_BUF_SZ 64
+ __u8 *usb_buf; /* buffer for USB exchanges */
struct urb *urb[MAX_NURBS];
__u8 *frbuf; /* buffer for nframes */
struct mutex queue_lock; /* ISOC queue protection */
__u32 sequence; /* frame sequence number */
char streaming;
+#ifdef CONFIG_PM
+ char frozen; /* suspend - resume */
+#endif
char users; /* number of opens */
char present; /* device connected */
char nbufread; /* number of buffers for read() */
struct gspca_frame *frame,
const __u8 *data,
int len);
+#ifdef CONFIG_PM
+int gspca_suspend(struct usb_interface *intf, pm_message_t message);
+int gspca_resume(struct usb_interface *intf);
+#endif
int gspca_auto_gain_n_exposure(struct gspca_dev *gspca_dev, int avg_lum,
int desired_avg_lum, int deadzone, int gain_knee, int exposure_knee);
#endif /* GSPCAV2_H */
return rc;
}
-static int reg_w_buf(struct gspca_dev *gspca_dev,
- __u16 index, __u8 *buf, int len)
-{
- int rc;
-
- rc = usb_control_msg(gspca_dev->dev,
- usb_sndbulkpipe(gspca_dev->dev, 4),
- 0x12,
- 0xc8, /* ?? */
- 0, /* value */
- index, buf, len, 500);
- if (rc < 0)
- PDEBUG(D_ERR, "reg write [%02x] error %d", index, rc);
- return rc;
-}
-
static void bulk_w(struct gspca_dev *gspca_dev,
__u16 *pch,
__u16 Address)
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
return 0;
}
/*
Initialize the MR97113 chip register
*/
- data = kmalloc(16, GFP_KERNEL);
data[0] = 0x00; /* address */
data[1] = 0x0c | 0x01; /* reg 0 */
data[2] = 0x01; /* reg 1 */
data[10] = 0x5d; /* reg 9, I2C device address
* [for PAS5101 (0x40)] [for MI (0x5d)] */
- err_code = reg_w_buf(gspca_dev, data[0], data, 11);
- kfree(data);
+ err_code = reg_w(gspca_dev, data[0], 11);
if (err_code < 0)
return;
- data = gspca_dev->usb_buf;
data[0] = 0x23; /* address */
data[1] = 0x09; /* reg 35, append frame header */
PDEBUG(D_ERR, "Camera Stop failed");
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
#define SEN_OV6630 2
#define SEN_OV7610 3
#define SEN_OV7620 4
-#define SEN_OV7630 5
-#define SEN_OV7640 6
-#define SEN_OV7670 7
-#define SEN_OV76BE 8
-#define SEN_OV8610 9
+#define SEN_OV7640 5
+#define SEN_OV7670 6
+#define SEN_OV76BE 7
+#define SEN_OV8610 8
};
.get = sd_getcolors,
},
/* next controls work with ov7670 only */
+#define HFLIP_IDX 3
{
{
.id = V4L2_CID_HFLIP,
.set = sd_sethflip,
.get = sd_gethflip,
},
+#define VFLIP_IDX 4
{
{
.id = V4L2_CID_VFLIP,
#define OV7670_REG_HAECC7 0xaa /* Hist AEC/AGC control 7 */
#define OV7670_REG_BD60MAX 0xab /* 60hz banding step limit */
+struct ov_regvals {
+ __u8 reg;
+ __u8 val;
+};
+struct ov_i2c_regvals {
+ __u8 reg;
+ __u8 val;
+};
+
+static const struct ov_i2c_regvals norm_6x20[] = {
+ { 0x12, 0x80 }, /* reset */
+ { 0x11, 0x01 },
+ { 0x03, 0x60 },
+ { 0x05, 0x7f }, /* For when autoadjust is off */
+ { 0x07, 0xa8 },
+ /* The ratio of 0x0c and 0x0d controls the white point */
+ { 0x0c, 0x24 },
+ { 0x0d, 0x24 },
+ { 0x0f, 0x15 }, /* COMS */
+ { 0x10, 0x75 }, /* AEC Exposure time */
+ { 0x12, 0x24 }, /* Enable AGC */
+ { 0x14, 0x04 },
+ /* 0x16: 0x06 helps frame stability with moving objects */
+ { 0x16, 0x06 },
+/* { 0x20, 0x30 }, * Aperture correction enable */
+ { 0x26, 0xb2 }, /* BLC enable */
+ /* 0x28: 0x05 Selects RGB format if RGB on */
+ { 0x28, 0x05 },
+ { 0x2a, 0x04 }, /* Disable framerate adjust */
+/* { 0x2b, 0xac }, * Framerate; Set 2a[7] first */
+ { 0x2d, 0x99 },
+ { 0x33, 0xa0 }, /* Color Processing Parameter */
+ { 0x34, 0xd2 }, /* Max A/D range */
+ { 0x38, 0x8b },
+ { 0x39, 0x40 },
+
+ { 0x3c, 0x39 }, /* Enable AEC mode changing */
+ { 0x3c, 0x3c }, /* Change AEC mode */
+ { 0x3c, 0x24 }, /* Disable AEC mode changing */
+
+ { 0x3d, 0x80 },
+ /* These next two registers (0x4a, 0x4b) are undocumented.
+ * They control the color balance */
+ { 0x4a, 0x80 },
+ { 0x4b, 0x80 },
+ { 0x4d, 0xd2 }, /* This reduces noise a bit */
+ { 0x4e, 0xc1 },
+ { 0x4f, 0x04 },
+/* Do 50-53 have any effect? */
+/* Toggle 0x12[2] off and on here? */
+};
+
+static const struct ov_i2c_regvals norm_6x30[] = {
+ { 0x12, 0x80 }, /* Reset */
+ { 0x00, 0x1f }, /* Gain */
+ { 0x01, 0x99 }, /* Blue gain */
+ { 0x02, 0x7c }, /* Red gain */
+ { 0x03, 0xc0 }, /* Saturation */
+ { 0x05, 0x0a }, /* Contrast */
+ { 0x06, 0x95 }, /* Brightness */
+ { 0x07, 0x2d }, /* Sharpness */
+ { 0x0c, 0x20 },
+ { 0x0d, 0x20 },
+ { 0x0e, 0x20 },
+ { 0x0f, 0x05 },
+ { 0x10, 0x9a },
+ { 0x11, 0x00 }, /* Pixel clock = fastest */
+ { 0x12, 0x24 }, /* Enable AGC and AWB */
+ { 0x13, 0x21 },
+ { 0x14, 0x80 },
+ { 0x15, 0x01 },
+ { 0x16, 0x03 },
+ { 0x17, 0x38 },
+ { 0x18, 0xea },
+ { 0x19, 0x04 },
+ { 0x1a, 0x93 },
+ { 0x1b, 0x00 },
+ { 0x1e, 0xc4 },
+ { 0x1f, 0x04 },
+ { 0x20, 0x20 },
+ { 0x21, 0x10 },
+ { 0x22, 0x88 },
+ { 0x23, 0xc0 }, /* Crystal circuit power level */
+ { 0x25, 0x9a }, /* Increase AEC black ratio */
+ { 0x26, 0xb2 }, /* BLC enable */
+ { 0x27, 0xa2 },
+ { 0x28, 0x00 },
+ { 0x29, 0x00 },
+ { 0x2a, 0x84 }, /* 60 Hz power */
+ { 0x2b, 0xa8 }, /* 60 Hz power */
+ { 0x2c, 0xa0 },
+ { 0x2d, 0x95 }, /* Enable auto-brightness */
+ { 0x2e, 0x88 },
+ { 0x33, 0x26 },
+ { 0x34, 0x03 },
+ { 0x36, 0x8f },
+ { 0x37, 0x80 },
+ { 0x38, 0x83 },
+ { 0x39, 0x80 },
+ { 0x3a, 0x0f },
+ { 0x3b, 0x3c },
+ { 0x3c, 0x1a },
+ { 0x3d, 0x80 },
+ { 0x3e, 0x80 },
+ { 0x3f, 0x0e },
+ { 0x40, 0x00 }, /* White bal */
+ { 0x41, 0x00 }, /* White bal */
+ { 0x42, 0x80 },
+ { 0x43, 0x3f }, /* White bal */
+ { 0x44, 0x80 },
+ { 0x45, 0x20 },
+ { 0x46, 0x20 },
+ { 0x47, 0x80 },
+ { 0x48, 0x7f },
+ { 0x49, 0x00 },
+ { 0x4a, 0x00 },
+ { 0x4b, 0x80 },
+ { 0x4c, 0xd0 },
+ { 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
+ { 0x4e, 0x40 },
+ { 0x4f, 0x07 }, /* UV avg., col. killer: max */
+ { 0x50, 0xff },
+ { 0x54, 0x23 }, /* Max AGC gain: 18dB */
+ { 0x55, 0xff },
+ { 0x56, 0x12 },
+ { 0x57, 0x81 },
+ { 0x58, 0x75 },
+ { 0x59, 0x01 }, /* AGC dark current comp.: +1 */
+ { 0x5a, 0x2c },
+ { 0x5b, 0x0f }, /* AWB chrominance levels */
+ { 0x5c, 0x10 },
+ { 0x3d, 0x80 },
+ { 0x27, 0xa6 },
+ { 0x12, 0x20 }, /* Toggle AWB */
+ { 0x12, 0x24 },
+};
+
+/* Lawrence Glaister <lg@jfm.bc.ca> reports:
+ *
+ * Register 0x0f in the 7610 has the following effects:
+ *
+ * 0x85 (AEC method 1): Best overall, good contrast range
+ * 0x45 (AEC method 2): Very overexposed
+ * 0xa5 (spec sheet default): Ok, but the black level is
+ * shifted resulting in loss of contrast
+ * 0x05 (old driver setting): very overexposed, too much
+ * contrast
+ */
+static const struct ov_i2c_regvals norm_7610[] = {
+ { 0x10, 0xff },
+ { 0x16, 0x06 },
+ { 0x28, 0x24 },
+ { 0x2b, 0xac },
+ { 0x12, 0x00 },
+ { 0x38, 0x81 },
+ { 0x28, 0x24 }, /* 0c */
+ { 0x0f, 0x85 }, /* lg's setting */
+ { 0x15, 0x01 },
+ { 0x20, 0x1c },
+ { 0x23, 0x2a },
+ { 0x24, 0x10 },
+ { 0x25, 0x8a },
+ { 0x26, 0xa2 },
+ { 0x27, 0xc2 },
+ { 0x2a, 0x04 },
+ { 0x2c, 0xfe },
+ { 0x2d, 0x93 },
+ { 0x30, 0x71 },
+ { 0x31, 0x60 },
+ { 0x32, 0x26 },
+ { 0x33, 0x20 },
+ { 0x34, 0x48 },
+ { 0x12, 0x24 },
+ { 0x11, 0x01 },
+ { 0x0c, 0x24 },
+ { 0x0d, 0x24 },
+};
+
+static const struct ov_i2c_regvals norm_7620[] = {
+ { 0x00, 0x00 }, /* gain */
+ { 0x01, 0x80 }, /* blue gain */
+ { 0x02, 0x80 }, /* red gain */
+ { 0x03, 0xc0 }, /* OV7670_REG_VREF */
+ { 0x06, 0x60 },
+ { 0x07, 0x00 },
+ { 0x0c, 0x24 },
+ { 0x0c, 0x24 },
+ { 0x0d, 0x24 },
+ { 0x11, 0x01 },
+ { 0x12, 0x24 },
+ { 0x13, 0x01 },
+ { 0x14, 0x84 },
+ { 0x15, 0x01 },
+ { 0x16, 0x03 },
+ { 0x17, 0x2f },
+ { 0x18, 0xcf },
+ { 0x19, 0x06 },
+ { 0x1a, 0xf5 },
+ { 0x1b, 0x00 },
+ { 0x20, 0x18 },
+ { 0x21, 0x80 },
+ { 0x22, 0x80 },
+ { 0x23, 0x00 },
+ { 0x26, 0xa2 },
+ { 0x27, 0xea },
+ { 0x28, 0x20 },
+ { 0x29, 0x00 },
+ { 0x2a, 0x10 },
+ { 0x2b, 0x00 },
+ { 0x2c, 0x88 },
+ { 0x2d, 0x91 },
+ { 0x2e, 0x80 },
+ { 0x2f, 0x44 },
+ { 0x60, 0x27 },
+ { 0x61, 0x02 },
+ { 0x62, 0x5f },
+ { 0x63, 0xd5 },
+ { 0x64, 0x57 },
+ { 0x65, 0x83 },
+ { 0x66, 0x55 },
+ { 0x67, 0x92 },
+ { 0x68, 0xcf },
+ { 0x69, 0x76 },
+ { 0x6a, 0x22 },
+ { 0x6b, 0x00 },
+ { 0x6c, 0x02 },
+ { 0x6d, 0x44 },
+ { 0x6e, 0x80 },
+ { 0x6f, 0x1d },
+ { 0x70, 0x8b },
+ { 0x71, 0x00 },
+ { 0x72, 0x14 },
+ { 0x73, 0x54 },
+ { 0x74, 0x00 },
+ { 0x75, 0x8e },
+ { 0x76, 0x00 },
+ { 0x77, 0xff },
+ { 0x78, 0x80 },
+ { 0x79, 0x80 },
+ { 0x7a, 0x80 },
+ { 0x7b, 0xe2 },
+ { 0x7c, 0x00 },
+};
+
+/* 7640 and 7648. The defaults should be OK for most registers. */
+static const struct ov_i2c_regvals norm_7640[] = {
+ { 0x12, 0x80 },
+ { 0x12, 0x14 },
+};
+
+/* 7670. Defaults taken from OmniVision provided data,
+* as provided by Jonathan Corbet of OLPC */
+static const struct ov_i2c_regvals norm_7670[] = {
+ { OV7670_REG_COM7, OV7670_COM7_RESET },
+ { OV7670_REG_TSLB, 0x04 }, /* OV */
+ { OV7670_REG_COM7, OV7670_COM7_FMT_VGA }, /* VGA */
+ { OV7670_REG_CLKRC, 0x01 },
+/*
+ * Set the hardware window. These values from OV don't entirely
+ * make sense - hstop is less than hstart. But they work...
+ */
+ { OV7670_REG_HSTART, 0x13 },
+ { OV7670_REG_HSTOP, 0x01 },
+ { OV7670_REG_HREF, 0xb6 },
+ { OV7670_REG_VSTART, 0x02 },
+ { OV7670_REG_VSTOP, 0x7a },
+ { OV7670_REG_VREF, 0x0a },
+
+ { OV7670_REG_COM3, 0 },
+ { OV7670_REG_COM14, 0 },
+/* Mystery scaling numbers */
+ { 0x70, 0x3a },
+ { 0x71, 0x35 },
+ { 0x72, 0x11 },
+ { 0x73, 0xf0 },
+ { 0xa2, 0x02 },
+/* { OV7670_REG_COM10, 0x0 }, */
+
+/* Gamma curve values */
+ { 0x7a, 0x20 },
+ { 0x7b, 0x10 },
+ { 0x7c, 0x1e },
+ { 0x7d, 0x35 },
+ { 0x7e, 0x5a },
+ { 0x7f, 0x69 },
+ { 0x80, 0x76 },
+ { 0x81, 0x80 },
+ { 0x82, 0x88 },
+ { 0x83, 0x8f },
+ { 0x84, 0x96 },
+ { 0x85, 0xa3 },
+ { 0x86, 0xaf },
+ { 0x87, 0xc4 },
+ { 0x88, 0xd7 },
+ { 0x89, 0xe8 },
+
+/* AGC and AEC parameters. Note we start by disabling those features,
+ then turn them only after tweaking the values. */
+ { OV7670_REG_COM8, OV7670_COM8_FASTAEC
+ | OV7670_COM8_AECSTEP
+ | OV7670_COM8_BFILT },
+ { OV7670_REG_GAIN, 0 },
+ { OV7670_REG_AECH, 0 },
+ { OV7670_REG_COM4, 0x40 }, /* magic reserved bit */
+ { OV7670_REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */
+ { OV7670_REG_BD50MAX, 0x05 },
+ { OV7670_REG_BD60MAX, 0x07 },
+ { OV7670_REG_AEW, 0x95 },
+ { OV7670_REG_AEB, 0x33 },
+ { OV7670_REG_VPT, 0xe3 },
+ { OV7670_REG_HAECC1, 0x78 },
+ { OV7670_REG_HAECC2, 0x68 },
+ { 0xa1, 0x03 }, /* magic */
+ { OV7670_REG_HAECC3, 0xd8 },
+ { OV7670_REG_HAECC4, 0xd8 },
+ { OV7670_REG_HAECC5, 0xf0 },
+ { OV7670_REG_HAECC6, 0x90 },
+ { OV7670_REG_HAECC7, 0x94 },
+ { OV7670_REG_COM8, OV7670_COM8_FASTAEC
+ | OV7670_COM8_AECSTEP
+ | OV7670_COM8_BFILT
+ | OV7670_COM8_AGC
+ | OV7670_COM8_AEC },
+
+/* Almost all of these are magic "reserved" values. */
+ { OV7670_REG_COM5, 0x61 },
+ { OV7670_REG_COM6, 0x4b },
+ { 0x16, 0x02 },
+ { OV7670_REG_MVFP, 0x07 },
+ { 0x21, 0x02 },
+ { 0x22, 0x91 },
+ { 0x29, 0x07 },
+ { 0x33, 0x0b },
+ { 0x35, 0x0b },
+ { 0x37, 0x1d },
+ { 0x38, 0x71 },
+ { 0x39, 0x2a },
+ { OV7670_REG_COM12, 0x78 },
+ { 0x4d, 0x40 },
+ { 0x4e, 0x20 },
+ { OV7670_REG_GFIX, 0 },
+ { 0x6b, 0x4a },
+ { 0x74, 0x10 },
+ { 0x8d, 0x4f },
+ { 0x8e, 0 },
+ { 0x8f, 0 },
+ { 0x90, 0 },
+ { 0x91, 0 },
+ { 0x96, 0 },
+ { 0x9a, 0 },
+ { 0xb0, 0x84 },
+ { 0xb1, 0x0c },
+ { 0xb2, 0x0e },
+ { 0xb3, 0x82 },
+ { 0xb8, 0x0a },
+
+/* More reserved magic, some of which tweaks white balance */
+ { 0x43, 0x0a },
+ { 0x44, 0xf0 },
+ { 0x45, 0x34 },
+ { 0x46, 0x58 },
+ { 0x47, 0x28 },
+ { 0x48, 0x3a },
+ { 0x59, 0x88 },
+ { 0x5a, 0x88 },
+ { 0x5b, 0x44 },
+ { 0x5c, 0x67 },
+ { 0x5d, 0x49 },
+ { 0x5e, 0x0e },
+ { 0x6c, 0x0a },
+ { 0x6d, 0x55 },
+ { 0x6e, 0x11 },
+ { 0x6f, 0x9f },
+ /* "9e for advance AWB" */
+ { 0x6a, 0x40 },
+ { OV7670_REG_BLUE, 0x40 },
+ { OV7670_REG_RED, 0x60 },
+ { OV7670_REG_COM8, OV7670_COM8_FASTAEC
+ | OV7670_COM8_AECSTEP
+ | OV7670_COM8_BFILT
+ | OV7670_COM8_AGC
+ | OV7670_COM8_AEC
+ | OV7670_COM8_AWB },
+
+/* Matrix coefficients */
+ { 0x4f, 0x80 },
+ { 0x50, 0x80 },
+ { 0x51, 0 },
+ { 0x52, 0x22 },
+ { 0x53, 0x5e },
+ { 0x54, 0x80 },
+ { 0x58, 0x9e },
+
+ { OV7670_REG_COM16, OV7670_COM16_AWBGAIN },
+ { OV7670_REG_EDGE, 0 },
+ { 0x75, 0x05 },
+ { 0x76, 0xe1 },
+ { 0x4c, 0 },
+ { 0x77, 0x01 },
+ { OV7670_REG_COM13, OV7670_COM13_GAMMA
+ | OV7670_COM13_UVSAT
+ | 2}, /* was 3 */
+ { 0x4b, 0x09 },
+ { 0xc9, 0x60 },
+ { OV7670_REG_COM16, 0x38 },
+ { 0x56, 0x40 },
+
+ { 0x34, 0x11 },
+ { OV7670_REG_COM11, OV7670_COM11_EXP|OV7670_COM11_HZAUTO },
+ { 0xa4, 0x88 },
+ { 0x96, 0 },
+ { 0x97, 0x30 },
+ { 0x98, 0x20 },
+ { 0x99, 0x30 },
+ { 0x9a, 0x84 },
+ { 0x9b, 0x29 },
+ { 0x9c, 0x03 },
+ { 0x9d, 0x4c },
+ { 0x9e, 0x3f },
+ { 0x78, 0x04 },
+
+/* Extra-weird stuff. Some sort of multiplexor register */
+ { 0x79, 0x01 },
+ { 0xc8, 0xf0 },
+ { 0x79, 0x0f },
+ { 0xc8, 0x00 },
+ { 0x79, 0x10 },
+ { 0xc8, 0x7e },
+ { 0x79, 0x0a },
+ { 0xc8, 0x80 },
+ { 0x79, 0x0b },
+ { 0xc8, 0x01 },
+ { 0x79, 0x0c },
+ { 0xc8, 0x0f },
+ { 0x79, 0x0d },
+ { 0xc8, 0x20 },
+ { 0x79, 0x09 },
+ { 0xc8, 0x80 },
+ { 0x79, 0x02 },
+ { 0xc8, 0xc0 },
+ { 0x79, 0x03 },
+ { 0xc8, 0x40 },
+ { 0x79, 0x05 },
+ { 0xc8, 0x30 },
+ { 0x79, 0x26 },
+};
+
+static const struct ov_i2c_regvals norm_8610[] = {
+ { 0x12, 0x80 },
+ { 0x00, 0x00 },
+ { 0x01, 0x80 },
+ { 0x02, 0x80 },
+ { 0x03, 0xc0 },
+ { 0x04, 0x30 },
+ { 0x05, 0x30 }, /* was 0x10, new from windrv 090403 */
+ { 0x06, 0x70 }, /* was 0x80, new from windrv 090403 */
+ { 0x0a, 0x86 },
+ { 0x0b, 0xb0 },
+ { 0x0c, 0x20 },
+ { 0x0d, 0x20 },
+ { 0x11, 0x01 },
+ { 0x12, 0x25 },
+ { 0x13, 0x01 },
+ { 0x14, 0x04 },
+ { 0x15, 0x01 }, /* Lin and Win think different about UV order */
+ { 0x16, 0x03 },
+ { 0x17, 0x38 }, /* was 0x2f, new from windrv 090403 */
+ { 0x18, 0xea }, /* was 0xcf, new from windrv 090403 */
+ { 0x19, 0x02 }, /* was 0x06, new from windrv 090403 */
+ { 0x1a, 0xf5 },
+ { 0x1b, 0x00 },
+ { 0x20, 0xd0 }, /* was 0x90, new from windrv 090403 */
+ { 0x23, 0xc0 }, /* was 0x00, new from windrv 090403 */
+ { 0x24, 0x30 }, /* was 0x1d, new from windrv 090403 */
+ { 0x25, 0x50 }, /* was 0x57, new from windrv 090403 */
+ { 0x26, 0xa2 },
+ { 0x27, 0xea },
+ { 0x28, 0x00 },
+ { 0x29, 0x00 },
+ { 0x2a, 0x80 },
+ { 0x2b, 0xc8 }, /* was 0xcc, new from windrv 090403 */
+ { 0x2c, 0xac },
+ { 0x2d, 0x45 }, /* was 0xd5, new from windrv 090403 */
+ { 0x2e, 0x80 },
+ { 0x2f, 0x14 }, /* was 0x01, new from windrv 090403 */
+ { 0x4c, 0x00 },
+ { 0x4d, 0x30 }, /* was 0x10, new from windrv 090403 */
+ { 0x60, 0x02 }, /* was 0x01, new from windrv 090403 */
+ { 0x61, 0x00 }, /* was 0x09, new from windrv 090403 */
+ { 0x62, 0x5f }, /* was 0xd7, new from windrv 090403 */
+ { 0x63, 0xff },
+ { 0x64, 0x53 }, /* new windrv 090403 says 0x57,
+ * maybe thats wrong */
+ { 0x65, 0x00 },
+ { 0x66, 0x55 },
+ { 0x67, 0xb0 },
+ { 0x68, 0xc0 }, /* was 0xaf, new from windrv 090403 */
+ { 0x69, 0x02 },
+ { 0x6a, 0x22 },
+ { 0x6b, 0x00 },
+ { 0x6c, 0x99 }, /* was 0x80, old windrv says 0x00, but
+ * deleting bit7 colors the first images red */
+ { 0x6d, 0x11 }, /* was 0x00, new from windrv 090403 */
+ { 0x6e, 0x11 }, /* was 0x00, new from windrv 090403 */
+ { 0x6f, 0x01 },
+ { 0x70, 0x8b },
+ { 0x71, 0x00 },
+ { 0x72, 0x14 },
+ { 0x73, 0x54 },
+ { 0x74, 0x00 },/* 0x60? - was 0x00, new from windrv 090403 */
+ { 0x75, 0x0e },
+ { 0x76, 0x02 }, /* was 0x02, new from windrv 090403 */
+ { 0x77, 0xff },
+ { 0x78, 0x80 },
+ { 0x79, 0x80 },
+ { 0x7a, 0x80 },
+ { 0x7b, 0x10 }, /* was 0x13, new from windrv 090403 */
+ { 0x7c, 0x00 },
+ { 0x7d, 0x08 }, /* was 0x09, new from windrv 090403 */
+ { 0x7e, 0x08 }, /* was 0xc0, new from windrv 090403 */
+ { 0x7f, 0xfb },
+ { 0x80, 0x28 },
+ { 0x81, 0x00 },
+ { 0x82, 0x23 },
+ { 0x83, 0x0b },
+ { 0x84, 0x00 },
+ { 0x85, 0x62 }, /* was 0x61, new from windrv 090403 */
+ { 0x86, 0xc9 },
+ { 0x87, 0x00 },
+ { 0x88, 0x00 },
+ { 0x89, 0x01 },
+ { 0x12, 0x20 },
+ { 0x12, 0x25 }, /* was 0x24, new from windrv 090403 */
+};
+
static unsigned char ov7670_abs_to_sm(unsigned char v)
{
if (v > 127)
rc = reg_w(sd, R51x_I2C_W_SID, slave);
if (rc < 0)
return rc;
+ sd->primary_i2c_slave = slave;
return reg_w(sd, R51x_I2C_R_SID, slave + 1);
}
-struct ov_regvals {
- __u8 reg;
- __u8 val;
-};
-struct ov_i2c_regvals {
- __u8 reg;
- __u8 val;
-};
-
static int write_regvals(struct sd *sd,
const struct ov_regvals *regvals,
int n)
static int ov8xx0_configure(struct sd *sd)
{
int rc;
- static const struct ov_i2c_regvals norm_8610[] = {
- { 0x12, 0x80 },
- { 0x00, 0x00 },
- { 0x01, 0x80 },
- { 0x02, 0x80 },
- { 0x03, 0xc0 },
- { 0x04, 0x30 },
- { 0x05, 0x30 }, /* was 0x10, new from windrv 090403 */
- { 0x06, 0x70 }, /* was 0x80, new from windrv 090403 */
- { 0x0a, 0x86 },
- { 0x0b, 0xb0 },
- { 0x0c, 0x20 },
- { 0x0d, 0x20 },
- { 0x11, 0x01 },
- { 0x12, 0x25 },
- { 0x13, 0x01 },
- { 0x14, 0x04 },
- { 0x15, 0x01 }, /* Lin and Win think different about UV order */
- { 0x16, 0x03 },
- { 0x17, 0x38 }, /* was 0x2f, new from windrv 090403 */
- { 0x18, 0xea }, /* was 0xcf, new from windrv 090403 */
- { 0x19, 0x02 }, /* was 0x06, new from windrv 090403 */
- { 0x1a, 0xf5 },
- { 0x1b, 0x00 },
- { 0x20, 0xd0 }, /* was 0x90, new from windrv 090403 */
- { 0x23, 0xc0 }, /* was 0x00, new from windrv 090403 */
- { 0x24, 0x30 }, /* was 0x1d, new from windrv 090403 */
- { 0x25, 0x50 }, /* was 0x57, new from windrv 090403 */
- { 0x26, 0xa2 },
- { 0x27, 0xea },
- { 0x28, 0x00 },
- { 0x29, 0x00 },
- { 0x2a, 0x80 },
- { 0x2b, 0xc8 }, /* was 0xcc, new from windrv 090403 */
- { 0x2c, 0xac },
- { 0x2d, 0x45 }, /* was 0xd5, new from windrv 090403 */
- { 0x2e, 0x80 },
- { 0x2f, 0x14 }, /* was 0x01, new from windrv 090403 */
- { 0x4c, 0x00 },
- { 0x4d, 0x30 }, /* was 0x10, new from windrv 090403 */
- { 0x60, 0x02 }, /* was 0x01, new from windrv 090403 */
- { 0x61, 0x00 }, /* was 0x09, new from windrv 090403 */
- { 0x62, 0x5f }, /* was 0xd7, new from windrv 090403 */
- { 0x63, 0xff },
- { 0x64, 0x53 }, /* new windrv 090403 says 0x57,
- * maybe thats wrong */
- { 0x65, 0x00 },
- { 0x66, 0x55 },
- { 0x67, 0xb0 },
- { 0x68, 0xc0 }, /* was 0xaf, new from windrv 090403 */
- { 0x69, 0x02 },
- { 0x6a, 0x22 },
- { 0x6b, 0x00 },
- { 0x6c, 0x99 }, /* was 0x80, old windrv says 0x00, but
- deleting bit7 colors the first images red */
- { 0x6d, 0x11 }, /* was 0x00, new from windrv 090403 */
- { 0x6e, 0x11 }, /* was 0x00, new from windrv 090403 */
- { 0x6f, 0x01 },
- { 0x70, 0x8b },
- { 0x71, 0x00 },
- { 0x72, 0x14 },
- { 0x73, 0x54 },
- { 0x74, 0x00 },/* 0x60? - was 0x00, new from windrv 090403 */
- { 0x75, 0x0e },
- { 0x76, 0x02 }, /* was 0x02, new from windrv 090403 */
- { 0x77, 0xff },
- { 0x78, 0x80 },
- { 0x79, 0x80 },
- { 0x7a, 0x80 },
- { 0x7b, 0x10 }, /* was 0x13, new from windrv 090403 */
- { 0x7c, 0x00 },
- { 0x7d, 0x08 }, /* was 0x09, new from windrv 090403 */
- { 0x7e, 0x08 }, /* was 0xc0, new from windrv 090403 */
- { 0x7f, 0xfb },
- { 0x80, 0x28 },
- { 0x81, 0x00 },
- { 0x82, 0x23 },
- { 0x83, 0x0b },
- { 0x84, 0x00 },
- { 0x85, 0x62 }, /* was 0x61, new from windrv 090403 */
- { 0x86, 0xc9 },
- { 0x87, 0x00 },
- { 0x88, 0x00 },
- { 0x89, 0x01 },
- { 0x12, 0x20 },
- { 0x12, 0x25 }, /* was 0x24, new from windrv 090403 */
- };
PDEBUG(D_PROBE, "starting ov8xx0 configuration");
- if (init_ov_sensor(sd) < 0)
- PDEBUG(D_ERR|D_PROBE, "Failed to read sensor ID");
- else
- PDEBUG(D_PROBE, "OV86x0 initialized");
-
/* Detect sensor (sub)type */
rc = i2c_r(sd, OV7610_REG_COM_I);
if (rc < 0) {
PDEBUG(D_ERR, "Unknown image sensor version: %d", rc & 3);
return -1;
}
- PDEBUG(D_PROBE, "Writing 8610 registers");
- if (write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610)))
- return -1;
/* Set sensor-specific vars */
/* sd->sif = 0; already done */
{
int rc, high, low;
- /* Lawrence Glaister <lg@jfm.bc.ca> reports:
- *
- * Register 0x0f in the 7610 has the following effects:
- *
- * 0x85 (AEC method 1): Best overall, good contrast range
- * 0x45 (AEC method 2): Very overexposed
- * 0xa5 (spec sheet default): Ok, but the black level is
- * shifted resulting in loss of contrast
- * 0x05 (old driver setting): very overexposed, too much
- * contrast
- */
- static const struct ov_i2c_regvals norm_7610[] = {
- { 0x10, 0xff },
- { 0x16, 0x06 },
- { 0x28, 0x24 },
- { 0x2b, 0xac },
- { 0x12, 0x00 },
- { 0x38, 0x81 },
- { 0x28, 0x24 }, /* 0c */
- { 0x0f, 0x85 }, /* lg's setting */
- { 0x15, 0x01 },
- { 0x20, 0x1c },
- { 0x23, 0x2a },
- { 0x24, 0x10 },
- { 0x25, 0x8a },
- { 0x26, 0xa2 },
- { 0x27, 0xc2 },
- { 0x2a, 0x04 },
- { 0x2c, 0xfe },
- { 0x2d, 0x93 },
- { 0x30, 0x71 },
- { 0x31, 0x60 },
- { 0x32, 0x26 },
- { 0x33, 0x20 },
- { 0x34, 0x48 },
- { 0x12, 0x24 },
- { 0x11, 0x01 },
- { 0x0c, 0x24 },
- { 0x0d, 0x24 },
- };
-
- static const struct ov_i2c_regvals norm_7620[] = {
- { 0x00, 0x00 }, /* gain */
- { 0x01, 0x80 }, /* blue gain */
- { 0x02, 0x80 }, /* red gain */
- { 0x03, 0xc0 }, /* OV7670_REG_VREF */
- { 0x06, 0x60 },
- { 0x07, 0x00 },
- { 0x0c, 0x24 },
- { 0x0c, 0x24 },
- { 0x0d, 0x24 },
- { 0x11, 0x01 },
- { 0x12, 0x24 },
- { 0x13, 0x01 },
- { 0x14, 0x84 },
- { 0x15, 0x01 },
- { 0x16, 0x03 },
- { 0x17, 0x2f },
- { 0x18, 0xcf },
- { 0x19, 0x06 },
- { 0x1a, 0xf5 },
- { 0x1b, 0x00 },
- { 0x20, 0x18 },
- { 0x21, 0x80 },
- { 0x22, 0x80 },
- { 0x23, 0x00 },
- { 0x26, 0xa2 },
- { 0x27, 0xea },
- { 0x28, 0x20 },
- { 0x29, 0x00 },
- { 0x2a, 0x10 },
- { 0x2b, 0x00 },
- { 0x2c, 0x88 },
- { 0x2d, 0x91 },
- { 0x2e, 0x80 },
- { 0x2f, 0x44 },
- { 0x60, 0x27 },
- { 0x61, 0x02 },
- { 0x62, 0x5f },
- { 0x63, 0xd5 },
- { 0x64, 0x57 },
- { 0x65, 0x83 },
- { 0x66, 0x55 },
- { 0x67, 0x92 },
- { 0x68, 0xcf },
- { 0x69, 0x76 },
- { 0x6a, 0x22 },
- { 0x6b, 0x00 },
- { 0x6c, 0x02 },
- { 0x6d, 0x44 },
- { 0x6e, 0x80 },
- { 0x6f, 0x1d },
- { 0x70, 0x8b },
- { 0x71, 0x00 },
- { 0x72, 0x14 },
- { 0x73, 0x54 },
- { 0x74, 0x00 },
- { 0x75, 0x8e },
- { 0x76, 0x00 },
- { 0x77, 0xff },
- { 0x78, 0x80 },
- { 0x79, 0x80 },
- { 0x7a, 0x80 },
- { 0x7b, 0xe2 },
- { 0x7c, 0x00 },
- };
-
- /* 7640 and 7648. The defaults should be OK for most registers. */
- static const struct ov_i2c_regvals norm_7640[] = {
- { 0x12, 0x80 },
- { 0x12, 0x14 },
- };
-
- /* 7670. Defaults taken from OmniVision provided data,
- * as provided by Jonathan Corbet of OLPC */
- static const struct ov_i2c_regvals norm_7670[] = {
- { OV7670_REG_COM7, OV7670_COM7_RESET },
- { OV7670_REG_TSLB, 0x04 }, /* OV */
- { OV7670_REG_COM7, OV7670_COM7_FMT_VGA }, /* VGA */
- { OV7670_REG_CLKRC, 0x01 },
- /*
- * Set the hardware window. These values from OV don't entirely
- * make sense - hstop is less than hstart. But they work...
- */
- { OV7670_REG_HSTART, 0x13 }, { OV7670_REG_HSTOP, 0x01 },
- { OV7670_REG_HREF, 0xb6 }, { OV7670_REG_VSTART, 0x02 },
- { OV7670_REG_VSTOP, 0x7a }, { OV7670_REG_VREF, 0x0a },
-
- { OV7670_REG_COM3, 0 }, { OV7670_REG_COM14, 0 },
- /* Mystery scaling numbers */
- { 0x70, 0x3a }, { 0x71, 0x35 },
- { 0x72, 0x11 }, { 0x73, 0xf0 },
- { 0xa2, 0x02 },
-/* { OV7670_REG_COM10, 0x0 }, */
-
- /* Gamma curve values */
- { 0x7a, 0x20 },
- { 0x7b, 0x10 },
- { 0x7c, 0x1e },
- { 0x7d, 0x35 },
- { 0x7e, 0x5a }, { 0x7f, 0x69 },
- { 0x80, 0x76 }, { 0x81, 0x80 },
- { 0x82, 0x88 }, { 0x83, 0x8f },
- { 0x84, 0x96 }, { 0x85, 0xa3 },
- { 0x86, 0xaf }, { 0x87, 0xc4 },
- { 0x88, 0xd7 }, { 0x89, 0xe8 },
-
- /* AGC and AEC parameters. Note we start by disabling those features,
- then turn them only after tweaking the values. */
- { OV7670_REG_COM8, OV7670_COM8_FASTAEC
- | OV7670_COM8_AECSTEP
- | OV7670_COM8_BFILT },
- { OV7670_REG_GAIN, 0 }, { OV7670_REG_AECH, 0 },
- { OV7670_REG_COM4, 0x40 }, /* magic reserved bit */
- { OV7670_REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */
- { OV7670_REG_BD50MAX, 0x05 }, { OV7670_REG_BD60MAX, 0x07 },
- { OV7670_REG_AEW, 0x95 }, { OV7670_REG_AEB, 0x33 },
- { OV7670_REG_VPT, 0xe3 }, { OV7670_REG_HAECC1, 0x78 },
- { OV7670_REG_HAECC2, 0x68 },
- { 0xa1, 0x03 }, /* magic */
- { OV7670_REG_HAECC3, 0xd8 }, { OV7670_REG_HAECC4, 0xd8 },
- { OV7670_REG_HAECC5, 0xf0 }, { OV7670_REG_HAECC6, 0x90 },
- { OV7670_REG_HAECC7, 0x94 },
- { OV7670_REG_COM8, OV7670_COM8_FASTAEC
- | OV7670_COM8_AECSTEP
- | OV7670_COM8_BFILT
- | OV7670_COM8_AGC
- | OV7670_COM8_AEC },
-
- /* Almost all of these are magic "reserved" values. */
- { OV7670_REG_COM5, 0x61 }, { OV7670_REG_COM6, 0x4b },
- { 0x16, 0x02 },
- { OV7670_REG_MVFP, 0x07 },
- { 0x21, 0x02 }, { 0x22, 0x91 },
- { 0x29, 0x07 }, { 0x33, 0x0b },
- { 0x35, 0x0b }, { 0x37, 0x1d },
- { 0x38, 0x71 }, { 0x39, 0x2a },
- { OV7670_REG_COM12, 0x78 }, { 0x4d, 0x40 },
- { 0x4e, 0x20 }, { OV7670_REG_GFIX, 0 },
- { 0x6b, 0x4a }, { 0x74, 0x10 },
- { 0x8d, 0x4f }, { 0x8e, 0 },
- { 0x8f, 0 }, { 0x90, 0 },
- { 0x91, 0 }, { 0x96, 0 },
- { 0x9a, 0 }, { 0xb0, 0x84 },
- { 0xb1, 0x0c }, { 0xb2, 0x0e },
- { 0xb3, 0x82 }, { 0xb8, 0x0a },
-
- /* More reserved magic, some of which tweaks white balance */
- { 0x43, 0x0a }, { 0x44, 0xf0 },
- { 0x45, 0x34 }, { 0x46, 0x58 },
- { 0x47, 0x28 }, { 0x48, 0x3a },
- { 0x59, 0x88 }, { 0x5a, 0x88 },
- { 0x5b, 0x44 }, { 0x5c, 0x67 },
- { 0x5d, 0x49 }, { 0x5e, 0x0e },
- { 0x6c, 0x0a }, { 0x6d, 0x55 },
- { 0x6e, 0x11 }, { 0x6f, 0x9f },
- /* "9e for advance AWB" */
- { 0x6a, 0x40 }, { OV7670_REG_BLUE, 0x40 },
- { OV7670_REG_RED, 0x60 },
- { OV7670_REG_COM8, OV7670_COM8_FASTAEC
- | OV7670_COM8_AECSTEP
- | OV7670_COM8_BFILT
- | OV7670_COM8_AGC
- | OV7670_COM8_AEC
- | OV7670_COM8_AWB },
-
- /* Matrix coefficients */
- { 0x4f, 0x80 }, { 0x50, 0x80 },
- { 0x51, 0 }, { 0x52, 0x22 },
- { 0x53, 0x5e }, { 0x54, 0x80 },
- { 0x58, 0x9e },
-
- { OV7670_REG_COM16, OV7670_COM16_AWBGAIN },
- { OV7670_REG_EDGE, 0 },
- { 0x75, 0x05 }, { 0x76, 0xe1 },
- { 0x4c, 0 }, { 0x77, 0x01 },
- { OV7670_REG_COM13, OV7670_COM13_GAMMA
- | OV7670_COM13_UVSAT
- | 2}, /* was 3 */
- { 0x4b, 0x09 },
- { 0xc9, 0x60 }, { OV7670_REG_COM16, 0x38 },
- { 0x56, 0x40 },
-
- { 0x34, 0x11 },
- { OV7670_REG_COM11, OV7670_COM11_EXP|OV7670_COM11_HZAUTO },
- { 0xa4, 0x88 }, { 0x96, 0 },
- { 0x97, 0x30 }, { 0x98, 0x20 },
- { 0x99, 0x30 }, { 0x9a, 0x84 },
- { 0x9b, 0x29 }, { 0x9c, 0x03 },
- { 0x9d, 0x4c }, { 0x9e, 0x3f },
- { 0x78, 0x04 },
-
- /* Extra-weird stuff. Some sort of multiplexor register */
- { 0x79, 0x01 }, { 0xc8, 0xf0 },
- { 0x79, 0x0f }, { 0xc8, 0x00 },
- { 0x79, 0x10 }, { 0xc8, 0x7e },
- { 0x79, 0x0a }, { 0xc8, 0x80 },
- { 0x79, 0x0b }, { 0xc8, 0x01 },
- { 0x79, 0x0c }, { 0xc8, 0x0f },
- { 0x79, 0x0d }, { 0xc8, 0x20 },
- { 0x79, 0x09 }, { 0xc8, 0x80 },
- { 0x79, 0x02 }, { 0xc8, 0xc0 },
- { 0x79, 0x03 }, { 0xc8, 0x40 },
- { 0x79, 0x05 }, { 0xc8, 0x30 },
- { 0x79, 0x26 },
- };
PDEBUG(D_PROBE, "starting OV7xx0 configuration");
switch (low) {
case 0x30:
PDEBUG(D_PROBE, "Sensor is an OV7630/OV7635");
- sd->sensor = SEN_OV7630;
- break;
+ PDEBUG(D_ERR,
+ "7630 is not supported by this driver");
+ return -1;
case 0x40:
PDEBUG(D_PROBE, "Sensor is an OV7645");
sd->sensor = SEN_OV7640; /* FIXME */
return -1;
}
- switch (sd->sensor) {
- case SEN_OV7620:
- PDEBUG(D_PROBE, "Writing 7620 registers");
- if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620)))
- return -1;
- break;
- case SEN_OV7630:
- PDEBUG(D_ERR, "7630 is not supported by this driver version");
- return -1;
- case SEN_OV7640:
- PDEBUG(D_PROBE, "Writing 7640 registers");
- if (write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640)))
- return -1;
- break;
- case SEN_OV7670:
- PDEBUG(D_PROBE, "Writing 7670 registers");
- if (write_i2c_regvals(sd, norm_7670, ARRAY_SIZE(norm_7670)))
- return -1;
- break;
- default:
- PDEBUG(D_PROBE, "Writing 7610 registers");
- if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610)))
- return -1;
- break;
- }
-
/* Set sensor-specific vars */
/* sd->sif = 0; already done */
return 0;
static int ov6xx0_configure(struct sd *sd)
{
int rc;
- static const struct ov_i2c_regvals norm_6x20[] = {
- { 0x12, 0x80 }, /* reset */
- { 0x11, 0x01 },
- { 0x03, 0x60 },
- { 0x05, 0x7f }, /* For when autoadjust is off */
- { 0x07, 0xa8 },
- /* The ratio of 0x0c and 0x0d controls the white point */
- { 0x0c, 0x24 },
- { 0x0d, 0x24 },
- { 0x0f, 0x15 }, /* COMS */
- { 0x10, 0x75 }, /* AEC Exposure time */
- { 0x12, 0x24 }, /* Enable AGC */
- { 0x14, 0x04 },
- /* 0x16: 0x06 helps frame stability with moving objects */
- { 0x16, 0x06 },
-/* { 0x20, 0x30 }, * Aperture correction enable */
- { 0x26, 0xb2 }, /* BLC enable */
- /* 0x28: 0x05 Selects RGB format if RGB on */
- { 0x28, 0x05 },
- { 0x2a, 0x04 }, /* Disable framerate adjust */
-/* { 0x2b, 0xac }, * Framerate; Set 2a[7] first */
- { 0x2d, 0x99 },
- { 0x33, 0xa0 }, /* Color Processing Parameter */
- { 0x34, 0xd2 }, /* Max A/D range */
- { 0x38, 0x8b },
- { 0x39, 0x40 },
-
- { 0x3c, 0x39 }, /* Enable AEC mode changing */
- { 0x3c, 0x3c }, /* Change AEC mode */
- { 0x3c, 0x24 }, /* Disable AEC mode changing */
-
- { 0x3d, 0x80 },
- /* These next two registers (0x4a, 0x4b) are undocumented.
- * They control the color balance */
- { 0x4a, 0x80 },
- { 0x4b, 0x80 },
- { 0x4d, 0xd2 }, /* This reduces noise a bit */
- { 0x4e, 0xc1 },
- { 0x4f, 0x04 },
-/* Do 50-53 have any effect? */
-/* Toggle 0x12[2] off and on here? */
- };
-
- static const struct ov_i2c_regvals norm_6x30[] = {
- { 0x12, 0x80 }, /* Reset */
- { 0x00, 0x1f }, /* Gain */
- { 0x01, 0x99 }, /* Blue gain */
- { 0x02, 0x7c }, /* Red gain */
- { 0x03, 0xc0 }, /* Saturation */
- { 0x05, 0x0a }, /* Contrast */
- { 0x06, 0x95 }, /* Brightness */
- { 0x07, 0x2d }, /* Sharpness */
- { 0x0c, 0x20 },
- { 0x0d, 0x20 },
- { 0x0e, 0x20 },
- { 0x0f, 0x05 },
- { 0x10, 0x9a },
- { 0x11, 0x00 }, /* Pixel clock = fastest */
- { 0x12, 0x24 }, /* Enable AGC and AWB */
- { 0x13, 0x21 },
- { 0x14, 0x80 },
- { 0x15, 0x01 },
- { 0x16, 0x03 },
- { 0x17, 0x38 },
- { 0x18, 0xea },
- { 0x19, 0x04 },
- { 0x1a, 0x93 },
- { 0x1b, 0x00 },
- { 0x1e, 0xc4 },
- { 0x1f, 0x04 },
- { 0x20, 0x20 },
- { 0x21, 0x10 },
- { 0x22, 0x88 },
- { 0x23, 0xc0 }, /* Crystal circuit power level */
- { 0x25, 0x9a }, /* Increase AEC black ratio */
- { 0x26, 0xb2 }, /* BLC enable */
- { 0x27, 0xa2 },
- { 0x28, 0x00 },
- { 0x29, 0x00 },
- { 0x2a, 0x84 }, /* 60 Hz power */
- { 0x2b, 0xa8 }, /* 60 Hz power */
- { 0x2c, 0xa0 },
- { 0x2d, 0x95 }, /* Enable auto-brightness */
- { 0x2e, 0x88 },
- { 0x33, 0x26 },
- { 0x34, 0x03 },
- { 0x36, 0x8f },
- { 0x37, 0x80 },
- { 0x38, 0x83 },
- { 0x39, 0x80 },
- { 0x3a, 0x0f },
- { 0x3b, 0x3c },
- { 0x3c, 0x1a },
- { 0x3d, 0x80 },
- { 0x3e, 0x80 },
- { 0x3f, 0x0e },
- { 0x40, 0x00 }, /* White bal */
- { 0x41, 0x00 }, /* White bal */
- { 0x42, 0x80 },
- { 0x43, 0x3f }, /* White bal */
- { 0x44, 0x80 },
- { 0x45, 0x20 },
- { 0x46, 0x20 },
- { 0x47, 0x80 },
- { 0x48, 0x7f },
- { 0x49, 0x00 },
- { 0x4a, 0x00 },
- { 0x4b, 0x80 },
- { 0x4c, 0xd0 },
- { 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
- { 0x4e, 0x40 },
- { 0x4f, 0x07 }, /* UV avg., col. killer: max */
- { 0x50, 0xff },
- { 0x54, 0x23 }, /* Max AGC gain: 18dB */
- { 0x55, 0xff },
- { 0x56, 0x12 },
- { 0x57, 0x81 },
- { 0x58, 0x75 },
- { 0x59, 0x01 }, /* AGC dark current comp.: +1 */
- { 0x5a, 0x2c },
- { 0x5b, 0x0f }, /* AWB chrominance levels */
- { 0x5c, 0x10 },
- { 0x3d, 0x80 },
- { 0x27, 0xa6 },
- { 0x12, 0x20 }, /* Toggle AWB */
- { 0x12, 0x24 },
- };
-
- PDEBUG(D_PROBE, "starting sensor configuration");
-
- if (init_ov_sensor(sd) < 0) {
- PDEBUG(D_ERR, "Failed to read sensor ID.");
- return -1;
- }
- PDEBUG(D_PROBE, "OV6xx0 sensor detected");
+ PDEBUG(D_PROBE, "starting OV6xx0 configuration");
/* Detect sensor (sub)type */
rc = i2c_r(sd, OV7610_REG_COM_I);
/* Set sensor-specific vars */
sd->sif = 1;
- if (sd->sensor == SEN_OV6620) {
- PDEBUG(D_PROBE, "Writing 6x20 registers");
- if (write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20)))
- return -1;
- } else {
- PDEBUG(D_PROBE, "Writing 6x30 registers");
- if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30)))
- return -1;
- }
return 0;
}
ov51x_led_control(sd, 0); /* turn LED off */
/* Test for 76xx */
- sd->primary_i2c_slave = OV7xx0_SID;
if (ov51x_set_slave_ids(sd, OV7xx0_SID) < 0)
goto error;
/* The OV519 must be more aggressive about sensor detection since
* I2C write will never fail if the sensor is not present. We have
* to try to initialize the sensor to detect its presence */
- if (init_ov_sensor(sd) < 0) {
+ if (init_ov_sensor(sd) >= 0) {
+ if (ov7xx0_configure(sd) < 0) {
+ PDEBUG(D_ERR, "Failed to configure OV7xx0");
+ goto error;
+ }
+ } else {
+
/* Test for 6xx0 */
- sd->primary_i2c_slave = OV6xx0_SID;
if (ov51x_set_slave_ids(sd, OV6xx0_SID) < 0)
goto error;
- if (init_ov_sensor(sd) < 0) {
+ if (init_ov_sensor(sd) >= 0) {
+ if (ov6xx0_configure(sd) < 0) {
+ PDEBUG(D_ERR, "Failed to configure OV6xx0");
+ goto error;
+ }
+ } else {
+
/* Test for 8xx0 */
- sd->primary_i2c_slave = OV8xx0_SID;
if (ov51x_set_slave_ids(sd, OV8xx0_SID) < 0)
goto error;
PDEBUG(D_ERR,
"Can't determine sensor slave IDs");
goto error;
- } else {
- if (ov8xx0_configure(sd) < 0) {
- PDEBUG(D_ERR,
- "Failed to configure OV8xx0 sensor");
- goto error;
- }
}
- } else {
- if (ov6xx0_configure(sd) < 0) {
- PDEBUG(D_ERR, "Failed to configure OV6xx0");
+ if (ov8xx0_configure(sd) < 0) {
+ PDEBUG(D_ERR,
+ "Failed to configure OV8xx0 sensor");
goto error;
}
}
- } else {
- if (ov7xx0_configure(sd) < 0) {
- PDEBUG(D_ERR, "Failed to configure OV7xx0");
- goto error;
- }
}
cam = &gspca_dev->cam;
sd->colors = COLOR_DEF;
sd->hflip = HFLIP_DEF;
sd->vflip = VFLIP_DEF;
+ if (sd->sensor != SEN_OV7670)
+ gspca_dev->ctrl_dis = (1 << HFLIP_IDX)
+ | (1 << VFLIP_IDX);
return 0;
error:
PDEBUG(D_ERR, "OV519 Config failed");
return -EBUSY;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ /* initialize the sensor */
+ switch (sd->sensor) {
+ case SEN_OV6620:
+ if (write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20)))
+ return -EIO;
+ break;
+ case SEN_OV6630:
+ if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30)))
+ return -EIO;
+ break;
+ default:
+/* case SEN_OV7610: */
+/* case SEN_OV76BE: */
+ if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610)))
+ return -EIO;
+ break;
+ case SEN_OV7620:
+ if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620)))
+ return -EIO;
+ break;
+ case SEN_OV7640:
+ if (write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640)))
+ return -EIO;
+ break;
+ case SEN_OV7670:
+ if (write_i2c_regvals(sd, norm_7670, ARRAY_SIZE(norm_7670)))
+ return -EIO;
+ break;
+ case SEN_OV8610:
+ if (write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610)))
+ return -EIO;
+ break;
+ }
return 0;
}
ov51x_led_control((struct sd *) gspca_dev, 0);
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
#define PAC207_GAIN_KNEE 20
#define PAC207_AUTOGAIN_DEADZONE 30
-/* We calculating the autogain at the end of the transfer of a frame, at this
- moment a frame with the old settings is being transmitted, and a frame is
- being captured with the old settings. So if we adjust the autogain we must
- ignore atleast the 2 next frames for the new settings to come into effect
- before doing any other adjustments */
-#define PAC207_AUTOGAIN_IGNORE_FRAMES 3
/* specific webcam descriptor */
struct sd {
.minimum = 0,
.maximum = 1,
.step = 1,
- .default_value = 1,
+#define AUTOGAIN_DEF 1
+ .default_value = AUTOGAIN_DEF,
.flags = 0,
},
.set = sd_setautogain,
/* 48 reg_72 Rate Control end BalSize_4a =0x36 */
static const __u8 PacReg72[] = { 0x00, 0x00, 0x36, 0x00 };
-static const unsigned char pac207_sof_marker[5] =
- { 0xff, 0xff, 0x00, 0xff, 0x96 };
-
static int pac207_write_regs(struct gspca_dev *gspca_dev, u16 index,
const u8 *buffer, u16 length)
{
return -ENODEV;
}
- pac207_write_reg(gspca_dev, 0x41, 0x00);
- /* Bit_0=Image Format,
- * Bit_1=LED,
- * Bit_2=Compression test mode enable */
- pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */
- pac207_write_reg(gspca_dev, 0x11, 0x30); /* Analog Bias */
-
PDEBUG(D_PROBE,
"Pixart PAC207BCA Image Processor and Control Chip detected"
" (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct);
cam = &gspca_dev->cam;
- cam->dev_name = (char *) id->driver_info;
cam->epaddr = 0x05;
cam->cam_mode = sif_mode;
cam->nmodes = ARRAY_SIZE(sif_mode);
sd->brightness = PAC207_BRIGHTNESS_DEFAULT;
sd->exposure = PAC207_EXPOSURE_DEFAULT;
sd->gain = PAC207_GAIN_DEFAULT;
+ sd->autogain = AUTOGAIN_DEF;
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
- struct sd *sd = (struct sd *) gspca_dev;
+ pac207_write_reg(gspca_dev, 0x41, 0x00);
+ /* Bit_0=Image Format,
+ * Bit_1=LED,
+ * Bit_2=Compression test mode enable */
+ pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */
+ pac207_write_reg(gspca_dev, 0x11, 0x30); /* Analog Bias */
- sd->autogain = 1;
return 0;
}
pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
+/* Include pac common sof detection functions */
+#include "pac_common.h"
static void pac207_do_auto_gain(struct gspca_dev *gspca_dev)
{
else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum,
100 + sd->brightness / 2, PAC207_AUTOGAIN_DEADZONE,
PAC207_GAIN_KNEE, PAC207_EXPOSURE_KNEE))
- sd->autogain_ignore_frames = PAC207_AUTOGAIN_IGNORE_FRAMES;
-}
-
-static unsigned char *pac207_find_sof(struct gspca_dev *gspca_dev,
- unsigned char *m, int len)
-{
- struct sd *sd = (struct sd *) gspca_dev;
- int i;
-
- /* Search for the SOF marker (fixed part) in the header */
- for (i = 0; i < len; i++) {
- if (m[i] == pac207_sof_marker[sd->sof_read]) {
- sd->sof_read++;
- if (sd->sof_read == sizeof(pac207_sof_marker)) {
- PDEBUG(D_STREAM,
- "SOF found, bytes to analyze: %u."
- " Frame starts at byte #%u",
- len, i + 1);
- sd->sof_read = 0;
- return m + i + 1;
- }
- } else {
- sd->sof_read = 0;
- }
- }
-
- return NULL;
+ sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES;
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct sd *sd = (struct sd *) gspca_dev;
unsigned char *sof;
- sof = pac207_find_sof(gspca_dev, data, len);
+ sof = pac_find_sof(gspca_dev, data, len);
if (sof) {
int n;
/* finish decoding current frame */
n = sof - data;
- if (n > sizeof pac207_sof_marker)
- n -= sizeof pac207_sof_marker;
+ if (n > sizeof pac_sof_marker)
+ n -= sizeof pac_sof_marker;
else
n = 0;
frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
sd->gain = PAC207_GAIN_DEFAULT;
if (gspca_dev->streaming) {
sd->autogain_ignore_frames =
- PAC207_AUTOGAIN_IGNORE_FRAMES;
+ PAC_AUTOGAIN_IGNORE_FRAMES;
setexposure(gspca_dev);
setgain(gspca_dev);
}
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.dq_callback = pac207_do_auto_gain,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+/* Some documentation about various registers as determined by trial and error.
+ When the register addresses differ between the 7202 and the 7311 the 2
+ different addresses are written as 7302addr/7311addr, when one of the 2
+ addresses is a - sign that register description is not valid for the
+ matching IC.
+
+ Register page 1:
+
+ Address Description
+ -/0x08 Unknown compressor related, must always be 8 except when not
+ in 640x480 resolution and page 4 reg 2 <= 3 then set it to 9 !
+ -/0x1b Auto white balance related, bit 0 is AWB enable (inverted)
+ bits 345 seem to toggle per color gains on/off (inverted)
+ 0x78 Global control, bit 6 controls the LED (inverted)
+ -/0x80 JPEG compression ratio ? Best not touched
+
+ Register page 3/4:
+
+ Address Description
+ 0x02 Clock divider 2-63, fps =~ 60 / val. Must be a multiple of 3 on
+ the 7302, so one of 3, 6, 9, ..., except when between 6 and 12?
+ -/0x0f Master gain 1-245, low value = high gain
+ 0x10/- Master gain 0-31
+ -/0x10 Another gain 0-15, limited influence (1-2x gain I guess)
+ 0x21 Bitfield: 0-1 unused, 2-3 vflip/hflip, 4-5 unknown, 6-7 unused
+ -/0x27 Seems to toggle various gains on / off, Setting bit 7 seems to
+ completely disable the analog amplification block. Set to 0x68
+ for max gain, 0x14 for minimal gain.
+*/
+
#define MODULE_NAME "pac7311"
#include "gspca.h"
struct sd {
struct gspca_dev gspca_dev; /* !! must be the first item */
- int lum_sum;
- atomic_t avg_lum;
- atomic_t do_gain;
-
unsigned char brightness;
unsigned char contrast;
unsigned char colors;
+ unsigned char gain;
+ unsigned char exposure;
unsigned char autogain;
+ __u8 hflip;
+ __u8 vflip;
+
+ __u8 sensor;
+#define SENSOR_PAC7302 0
+#define SENSOR_PAC7311 1
- char ffseq;
- signed char ag_cnt;
-#define AG_CNT_START 13
+ u8 sof_read;
+ u8 autogain_ignore_frames;
+
+ atomic_t avg_lum;
};
/* V4L2 controls supported by the driver */
static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val);
static struct ctrl sd_ctrls[] = {
+/* This control is pac7302 only */
+#define BRIGHTNESS_IDX 0
{
{
.id = V4L2_CID_BRIGHTNESS,
.set = sd_setbrightness,
.get = sd_getbrightness,
},
+/* This control is for both the 7302 and the 7311 */
{
{
.id = V4L2_CID_CONTRAST,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Contrast",
.minimum = 0,
- .maximum = 255,
+#define CONTRAST_MAX 255
+ .maximum = CONTRAST_MAX,
.step = 1,
#define CONTRAST_DEF 127
.default_value = CONTRAST_DEF,
.set = sd_setcontrast,
.get = sd_getcontrast,
},
+/* This control is pac7302 only */
+#define SATURATION_IDX 2
{
{
.id = V4L2_CID_SATURATION,
.type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Color",
+ .name = "Saturation",
.minimum = 0,
- .maximum = 255,
+#define COLOR_MAX 255
+ .maximum = COLOR_MAX,
.step = 1,
#define COLOR_DEF 127
.default_value = COLOR_DEF,
.set = sd_setcolors,
.get = sd_getcolors,
},
+/* All controls below are for both the 7302 and the 7311 */
+ {
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain",
+ .minimum = 0,
+#define GAIN_MAX 255
+ .maximum = GAIN_MAX,
+ .step = 1,
+#define GAIN_DEF 127
+#define GAIN_KNEE 255 /* Gain seems to cause little noise on the pac73xx */
+ .default_value = GAIN_DEF,
+ },
+ .set = sd_setgain,
+ .get = sd_getgain,
+ },
+ {
+ {
+ .id = V4L2_CID_EXPOSURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Exposure",
+ .minimum = 0,
+#define EXPOSURE_MAX 255
+ .maximum = EXPOSURE_MAX,
+ .step = 1,
+#define EXPOSURE_DEF 16 /* 32 ms / 30 fps */
+#define EXPOSURE_KNEE 50 /* 100 ms / 10 fps */
+ .default_value = EXPOSURE_DEF,
+ },
+ .set = sd_setexposure,
+ .get = sd_getexposure,
+ },
{
{
.id = V4L2_CID_AUTOGAIN,
.set = sd_setautogain,
.get = sd_getautogain,
},
+ {
+ {
+ .id = V4L2_CID_HFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Mirror",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define HFLIP_DEF 0
+ .default_value = HFLIP_DEF,
+ },
+ .set = sd_sethflip,
+ .get = sd_gethflip,
+ },
+ {
+ {
+ .id = V4L2_CID_VFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Vflip",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define VFLIP_DEF 0
+ .default_value = VFLIP_DEF,
+ },
+ .set = sd_setvflip,
+ .get = sd_getvflip,
+ },
};
static struct v4l2_pix_format vga_mode[] = {
- {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ {160, 120, V4L2_PIX_FMT_PJPG, V4L2_FIELD_NONE,
.bytesperline = 160,
.sizeimage = 160 * 120 * 3 / 8 + 590,
.colorspace = V4L2_COLORSPACE_JPEG,
.priv = 2},
- {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ {320, 240, V4L2_PIX_FMT_PJPG, V4L2_FIELD_NONE,
.bytesperline = 320,
.sizeimage = 320 * 240 * 3 / 8 + 590,
.colorspace = V4L2_COLORSPACE_JPEG,
.priv = 1},
- {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ {640, 480, V4L2_PIX_FMT_PJPG, V4L2_FIELD_NONE,
.bytesperline = 640,
.sizeimage = 640 * 480 * 3 / 8 + 590,
.colorspace = V4L2_COLORSPACE_JPEG,
.priv = 0},
};
-#define PAC7311_JPEG_HEADER_SIZE (sizeof pac7311_jpeg_header) /* (594) */
-
-static const __u8 pac7311_jpeg_header[] = {
- 0xff, 0xd8,
- 0xff, 0xe0, 0x00, 0x03, 0x20,
- 0xff, 0xc0, 0x00, 0x11, 0x08,
- 0x01, 0xe0, /* 12: height */
- 0x02, 0x80, /* 14: width */
- 0x03, /* 16 */
- 0x01, 0x21, 0x00,
- 0x02, 0x11, 0x01,
- 0x03, 0x11, 0x01,
- 0xff, 0xdb, 0x00, 0x84,
- 0x00, 0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e, 0x0d,
- 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28, 0x1a, 0x18, 0x16,
- 0x16, 0x18, 0x31, 0x23, 0x25, 0x1d, 0x28, 0x3a, 0x33, 0x3d,
- 0x3c, 0x39, 0x33, 0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40,
- 0x44, 0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57, 0x5f,
- 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71, 0x79, 0x70, 0x64,
- 0x78, 0x5c, 0x65, 0x67, 0x63, 0x01, 0x11, 0x12, 0x12, 0x18,
- 0x15, 0x18, 0x2f, 0x1a, 0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
- 0xff, 0xc4, 0x01, 0xa2, 0x00, 0x00, 0x01, 0x05, 0x01, 0x01,
- 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
- 0x09, 0x0a, 0x0b, 0x10, 0x00, 0x02, 0x01, 0x03, 0x03, 0x02,
- 0x04, 0x03, 0x05, 0x05, 0x04, 0x04, 0x00, 0x00, 0x01, 0x7d,
- 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12, 0x21, 0x31,
- 0x41, 0x06, 0x13, 0x51, 0x61, 0x07, 0x22, 0x71, 0x14, 0x32,
- 0x81, 0x91, 0xa1, 0x08, 0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52,
- 0xd1, 0xf0, 0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16,
- 0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2a,
- 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3a, 0x43, 0x44, 0x45,
- 0x46, 0x47, 0x48, 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57,
- 0x58, 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69,
- 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7a, 0x83,
- 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94,
- 0x95, 0x96, 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5,
- 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6,
- 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7,
- 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8,
- 0xd9, 0xda, 0xe1, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8,
- 0xe9, 0xea, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8,
- 0xf9, 0xfa, 0x01, 0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01,
- 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a,
- 0x0b, 0x11, 0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04,
- 0x07, 0x05, 0x04, 0x04, 0x00, 0x01, 0x02, 0x77, 0x00, 0x01,
- 0x02, 0x03, 0x11, 0x04, 0x05, 0x21, 0x31, 0x06, 0x12, 0x41,
- 0x51, 0x07, 0x61, 0x71, 0x13, 0x22, 0x32, 0x81, 0x08, 0x14,
- 0x42, 0x91, 0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0,
- 0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34, 0xe1, 0x25,
- 0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26, 0x27, 0x28, 0x29, 0x2a,
- 0x35, 0x36, 0x37, 0x38, 0x39, 0x3a, 0x43, 0x44, 0x45, 0x46,
- 0x47, 0x48, 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58,
- 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a,
- 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7a, 0x82, 0x83,
- 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94,
- 0x95, 0x96, 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5,
- 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6,
- 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7,
- 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8,
- 0xd9, 0xda, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9,
- 0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, 0xf9, 0xfa,
- 0xff, 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03,
- 0x11, 0x00, 0x3f, 0x00
+/* pac 7302 */
+static const __u8 init_7302[] = {
+/* index,value */
+ 0xff, 0x01, /* page 1 */
+ 0x78, 0x00, /* deactivate */
+ 0xff, 0x01,
+ 0x78, 0x40, /* led off */
+};
+static const __u8 start_7302[] = {
+/* index, len, [value]* */
+ 0xff, 1, 0x00, /* page 0 */
+ 0x00, 12, 0x01, 0x40, 0x40, 0x40, 0x01, 0xe0, 0x02, 0x80,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x0d, 24, 0x03, 0x01, 0x00, 0xb5, 0x07, 0xcb, 0x00, 0x00,
+ 0x07, 0xc8, 0x00, 0xea, 0x07, 0xcf, 0x07, 0xf7,
+ 0x07, 0x7e, 0x01, 0x0b, 0x00, 0x00, 0x00, 0x11,
+ 0x26, 2, 0xaa, 0xaa,
+ 0x2e, 1, 0x31,
+ 0x38, 1, 0x01,
+ 0x3a, 3, 0x14, 0xff, 0x5a,
+ 0x43, 11, 0x00, 0x0a, 0x18, 0x11, 0x01, 0x2c, 0x88, 0x11,
+ 0x00, 0x54, 0x11,
+ 0x55, 1, 0x00,
+ 0x62, 4, 0x10, 0x1e, 0x1e, 0x18,
+ 0x6b, 1, 0x00,
+ 0x6e, 3, 0x08, 0x06, 0x00,
+ 0x72, 3, 0x00, 0xff, 0x00,
+ 0x7d, 23, 0x01, 0x01, 0x58, 0x46, 0x50, 0x3c, 0x50, 0x3c,
+ 0x54, 0x46, 0x54, 0x56, 0x52, 0x50, 0x52, 0x50,
+ 0x56, 0x64, 0xa4, 0x00, 0xda, 0x00, 0x00,
+ 0xa2, 10, 0x22, 0x2c, 0x3c, 0x54, 0x69, 0x7c, 0x9c, 0xb9,
+ 0xd2, 0xeb,
+ 0xaf, 1, 0x02,
+ 0xb5, 2, 0x08, 0x08,
+ 0xb8, 2, 0x08, 0x88,
+ 0xc4, 4, 0xae, 0x01, 0x04, 0x01,
+ 0xcc, 1, 0x00,
+ 0xd1, 11, 0x01, 0x30, 0x49, 0x5e, 0x6f, 0x7f, 0x8e, 0xa9,
+ 0xc1, 0xd7, 0xec,
+ 0xdc, 1, 0x01,
+ 0xff, 1, 0x01, /* page 1 */
+ 0x12, 3, 0x02, 0x00, 0x01,
+ 0x3e, 2, 0x00, 0x00,
+ 0x76, 5, 0x01, 0x20, 0x40, 0x00, 0xf2,
+ 0x7c, 1, 0x00,
+ 0x7f, 10, 0x4b, 0x0f, 0x01, 0x2c, 0x02, 0x58, 0x03, 0x20,
+ 0x02, 0x00,
+ 0x96, 5, 0x01, 0x10, 0x04, 0x01, 0x04,
+ 0xc8, 14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00,
+ 0x07, 0x00, 0x01, 0x07, 0x04, 0x01,
+ 0xd8, 1, 0x01,
+ 0xdb, 2, 0x00, 0x01,
+ 0xde, 7, 0x00, 0x01, 0x04, 0x04, 0x00, 0x00, 0x00,
+ 0xe6, 4, 0x00, 0x00, 0x00, 0x01,
+ 0xeb, 1, 0x00,
+ 0xff, 1, 0x02, /* page 2 */
+ 0x22, 1, 0x00,
+ 0xff, 1, 0x03, /* page 3 */
+ 0x00, 255, /* load the page 3 */
+ 0x11, 1, 0x01,
+ 0xff, 1, 0x02, /* page 2 */
+ 0x13, 1, 0x00,
+ 0x22, 4, 0x1f, 0xa4, 0xf0, 0x96,
+ 0x27, 2, 0x14, 0x0c,
+ 0x2a, 5, 0xc8, 0x00, 0x18, 0x12, 0x22,
+ 0x64, 8, 0x00, 0x00, 0xf0, 0x01, 0x14, 0x44, 0x44, 0x44,
+ 0x6e, 1, 0x08,
+ 0xff, 1, 0x01, /* page 1 */
+ 0x78, 1, 0x00,
+ 0, 0 /* end of sequence */
+};
+
+/* page 3 - the value 0xaa says skip the index - see reg_w_page() */
+static const __u8 page3_7302[] = {
+ 0x90, 0x40, 0x03, 0x50, 0xc2, 0x01, 0x14, 0x16,
+ 0x14, 0x12, 0x00, 0x00, 0x00, 0x02, 0x33, 0x00,
+ 0x0f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x47, 0x01, 0xb3, 0x01, 0x00,
+ 0x00, 0x08, 0x00, 0x00, 0x0d, 0x00, 0x00, 0x21,
+ 0x00, 0x00, 0x00, 0x54, 0xf4, 0x02, 0x52, 0x54,
+ 0xa4, 0xb8, 0xe0, 0x2a, 0xf6, 0x00, 0x00, 0x00,
+ 0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0xfc, 0x00, 0xf2, 0x1f, 0x04, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0xc0, 0xc0, 0x10, 0x00, 0x00,
+ 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x40, 0xff, 0x03, 0x19, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0xc8, 0xc8, 0xc8,
+ 0xc8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50,
+ 0x08, 0x10, 0x24, 0x40, 0x00, 0x00, 0x00, 0x00,
+ 0x01, 0x00, 0x02, 0x47, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x02, 0xfa, 0x00, 0x64, 0x5a, 0x28, 0x00,
+ 0x00
+};
+
+/* pac 7311 */
+static const __u8 init_7311[] = {
+ 0x78, 0x40, /* Bit_0=start stream, Bit_6=LED */
+ 0x78, 0x40, /* Bit_0=start stream, Bit_6=LED */
+ 0x78, 0x44, /* Bit_0=start stream, Bit_6=LED */
+ 0xff, 0x04,
+ 0x27, 0x80,
+ 0x28, 0xca,
+ 0x29, 0x53,
+ 0x2a, 0x0e,
+ 0xff, 0x01,
+ 0x3e, 0x20,
+};
+
+static const __u8 start_7311[] = {
+/* index, len, [value]* */
+ 0xff, 1, 0x01, /* page 1 */
+ 0x02, 43, 0x48, 0x0a, 0x40, 0x08, 0x00, 0x00, 0x08, 0x00,
+ 0x06, 0xff, 0x11, 0xff, 0x5a, 0x30, 0x90, 0x4c,
+ 0x00, 0x07, 0x00, 0x0a, 0x10, 0x00, 0xa0, 0x10,
+ 0x02, 0x00, 0x00, 0x00, 0x00, 0x0b, 0x01, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00,
+ 0x3e, 42, 0x00, 0x00, 0x78, 0x52, 0x4a, 0x52, 0x78, 0x6e,
+ 0x48, 0x46, 0x48, 0x6e, 0x5f, 0x49, 0x42, 0x49,
+ 0x5f, 0x5f, 0x49, 0x42, 0x49, 0x5f, 0x6e, 0x48,
+ 0x46, 0x48, 0x6e, 0x78, 0x52, 0x4a, 0x52, 0x78,
+ 0x00, 0x00, 0x09, 0x1b, 0x34, 0x49, 0x5c, 0x9b,
+ 0xd0, 0xff,
+ 0x78, 6, 0x44, 0x00, 0xf2, 0x01, 0x01, 0x80,
+ 0x7f, 18, 0x2a, 0x1c, 0x00, 0xc8, 0x02, 0x58, 0x03, 0x84,
+ 0x12, 0x00, 0x1a, 0x04, 0x08, 0x0c, 0x10, 0x14,
+ 0x18, 0x20,
+ 0x96, 3, 0x01, 0x08, 0x04,
+ 0xa0, 4, 0x44, 0x44, 0x44, 0x04,
+ 0xf0, 13, 0x01, 0x00, 0x00, 0x00, 0x22, 0x00, 0x20, 0x00,
+ 0x3f, 0x00, 0x0a, 0x01, 0x00,
+ 0xff, 1, 0x04, /* page 4 */
+ 0x00, 254, /* load the page 4 */
+ 0x11, 1, 0x01,
+ 0, 0 /* end of sequence */
+};
+
+/* page 4 - the value 0xaa says skip the index - see reg_w_page() */
+static const __u8 page4_7311[] = {
+ 0xaa, 0xaa, 0x04, 0x54, 0x07, 0x2b, 0x09, 0x0f,
+ 0x09, 0x00, 0xaa, 0xaa, 0x07, 0x00, 0x00, 0x62,
+ 0x08, 0xaa, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x03, 0xa0, 0x01, 0xf4, 0xaa,
+ 0xaa, 0x00, 0x08, 0xaa, 0x03, 0xaa, 0x00, 0x68,
+ 0xca, 0x10, 0x06, 0x78, 0x00, 0x00, 0x00, 0x00,
+ 0x23, 0x28, 0x04, 0x11, 0x00, 0x00
};
static void reg_w_buf(struct gspca_dev *gspca_dev,
- __u16 index,
- const char *buffer, __u16 len)
+ __u8 index,
+ const char *buffer, int len)
{
memcpy(gspca_dev->usb_buf, buffer, len);
usb_control_msg(gspca_dev->dev,
500);
}
-static __u8 reg_r(struct gspca_dev *gspca_dev,
- __u16 index)
-{
- usb_control_msg(gspca_dev->dev,
- usb_rcvctrlpipe(gspca_dev->dev, 0),
- 0, /* request */
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0, /* value */
- index, gspca_dev->usb_buf, 1,
- 500);
- return gspca_dev->usb_buf[0];
-}
static void reg_w(struct gspca_dev *gspca_dev,
- __u16 index,
+ __u8 index,
__u8 value)
{
gspca_dev->usb_buf[0] = value;
usb_sndctrlpipe(gspca_dev->dev, 0),
0, /* request */
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value, index, gspca_dev->usb_buf, 1,
+ 0, index, gspca_dev->usb_buf, 1,
500);
}
+static void reg_w_seq(struct gspca_dev *gspca_dev,
+ const __u8 *seq, int len)
+{
+ while (--len >= 0) {
+ reg_w(gspca_dev, seq[0], seq[1]);
+ seq += 2;
+ }
+}
+
+/* load the beginning of a page */
+static void reg_w_page(struct gspca_dev *gspca_dev,
+ const __u8 *page, int len)
+{
+ int index;
+
+ for (index = 0; index < len; index++) {
+ if (page[index] == 0xaa) /* skip this index */
+ continue;
+ gspca_dev->usb_buf[0] = page[index];
+ usb_control_msg(gspca_dev->dev,
+ usb_sndctrlpipe(gspca_dev->dev, 0),
+ 0, /* request */
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, index, gspca_dev->usb_buf, 1,
+ 500);
+ }
+}
+
+/* output a variable sequence */
+static void reg_w_var(struct gspca_dev *gspca_dev,
+ const __u8 *seq)
+{
+ int index, len;
+
+ for (;;) {
+ index = *seq++;
+ len = *seq++;
+ switch (len) {
+ case 0:
+ return;
+ case 254:
+ reg_w_page(gspca_dev, page4_7311, sizeof page4_7311);
+ break;
+ case 255:
+ reg_w_page(gspca_dev, page3_7302, sizeof page3_7302);
+ break;
+ default:
+ if (len > 64) {
+ PDEBUG(D_ERR|D_STREAM,
+ "Incorrect variable sequence");
+ return;
+ }
+ while (len > 0) {
+ if (len < 8) {
+ reg_w_buf(gspca_dev, index, seq, len);
+ seq += len;
+ break;
+ }
+ reg_w_buf(gspca_dev, index, seq, 8);
+ seq += 8;
+ index += 8;
+ len -= 8;
+ }
+ }
+ }
+ /* not reached */
+}
+
/* this function is called at probe time */
static int sd_config(struct gspca_dev *gspca_dev,
const struct usb_device_id *id)
struct sd *sd = (struct sd *) gspca_dev;
struct cam *cam;
- PDEBUG(D_CONF, "Find Sensor PAC7311");
- reg_w(gspca_dev, 0x78, 0x40); /* Bit_0=start stream, Bit_7=LED */
- reg_w(gspca_dev, 0x78, 0x40); /* Bit_0=start stream, Bit_7=LED */
- reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
- reg_w(gspca_dev, 0xff, 0x04);
- reg_w(gspca_dev, 0x27, 0x80);
- reg_w(gspca_dev, 0x28, 0xca);
- reg_w(gspca_dev, 0x29, 0x53);
- reg_w(gspca_dev, 0x2a, 0x0e);
- reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x3e, 0x20);
-
cam = &gspca_dev->cam;
cam->epaddr = 0x05;
- cam->cam_mode = vga_mode;
- cam->nmodes = ARRAY_SIZE(vga_mode);
+
+ sd->sensor = id->driver_info;
+ if (sd->sensor == SENSOR_PAC7302) {
+ PDEBUG(D_CONF, "Find Sensor PAC7302");
+ cam->cam_mode = &vga_mode[2]; /* only 640x480 */
+ cam->nmodes = 1;
+ } else {
+ PDEBUG(D_CONF, "Find Sensor PAC7311");
+ cam->cam_mode = vga_mode;
+ cam->nmodes = ARRAY_SIZE(vga_mode);
+ gspca_dev->ctrl_dis = (1 << BRIGHTNESS_IDX)
+ | (1 << SATURATION_IDX);
+ }
sd->brightness = BRIGHTNESS_DEF;
sd->contrast = CONTRAST_DEF;
sd->colors = COLOR_DEF;
+ sd->gain = GAIN_DEF;
+ sd->exposure = EXPOSURE_DEF;
sd->autogain = AUTOGAIN_DEF;
- sd->ag_cnt = -1;
+ sd->hflip = HFLIP_DEF;
+ sd->vflip = VFLIP_DEF;
return 0;
}
-static void setbrightness(struct gspca_dev *gspca_dev)
+/* This function is used by pac7302 only */
+static void setbrightcont(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int i, v;
+ static const __u8 max[10] =
+ {0x29, 0x33, 0x42, 0x5a, 0x6e, 0x80, 0x9f, 0xbb,
+ 0xd4, 0xec};
+ static const __u8 delta[10] =
+ {0x35, 0x33, 0x33, 0x2f, 0x2a, 0x25, 0x1e, 0x17,
+ 0x11, 0x0b};
+
+ reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
+ for (i = 0; i < 10; i++) {
+ v = max[i];
+ v += (sd->brightness - BRIGHTNESS_MAX)
+ * 150 / BRIGHTNESS_MAX; /* 200 ? */
+ v -= delta[i] * sd->contrast / CONTRAST_MAX;
+ if (v < 0)
+ v = 0;
+ else if (v > 0xff)
+ v = 0xff;
+ reg_w(gspca_dev, 0xa2 + i, v);
+ }
+ reg_w(gspca_dev, 0xdc, 0x01);
+}
+
+/* This function is used by pac7311 only */
+static void setcontrast(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int brightness;
-/*jfm: inverted?*/
- brightness = BRIGHTNESS_MAX - sd->brightness;
reg_w(gspca_dev, 0xff, 0x04);
-/* reg_w(gspca_dev, 0x0e, 0x00); */
- reg_w(gspca_dev, 0x0f, brightness);
+ reg_w(gspca_dev, 0x10, sd->contrast >> 4);
/* load registers to sensor (Bit 0, auto clear) */
reg_w(gspca_dev, 0x11, 0x01);
- PDEBUG(D_CONF|D_STREAM, "brightness: %i", brightness);
}
-static void setcontrast(struct gspca_dev *gspca_dev)
+/* This function is used by pac7302 only */
+static void setcolors(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ int i, v;
+ static const int a[9] =
+ {217, -212, 0, -101, 170, -67, -38, -315, 355};
+ static const int b[9] =
+ {19, 106, 0, 19, 106, 1, 19, 106, 1};
- reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x80, sd->contrast);
- /* load registers to sensor (Bit 0, auto clear) */
+ reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
reg_w(gspca_dev, 0x11, 0x01);
- PDEBUG(D_CONF|D_STREAM, "contrast: %i", sd->contrast);
+ reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
+ reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
+ for (i = 0; i < 9; i++) {
+ v = a[i] * sd->colors / COLOR_MAX + b[i];
+ reg_w(gspca_dev, 0x0f + 2 * i, (v >> 8) & 0x07);
+ reg_w(gspca_dev, 0x0f + 2 * i + 1, v);
+ }
+ reg_w(gspca_dev, 0xdc, 0x01);
+ PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors);
}
-static void setcolors(struct gspca_dev *gspca_dev)
+static void setgain(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x10, sd->colors);
+ if (sd->sensor == SENSOR_PAC7302) {
+ reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
+ reg_w(gspca_dev, 0x10, sd->gain >> 3);
+ } else {
+ int gain = GAIN_MAX - sd->gain;
+ if (gain < 1)
+ gain = 1;
+ else if (gain > 245)
+ gain = 245;
+ reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
+ reg_w(gspca_dev, 0x0e, 0x00);
+ reg_w(gspca_dev, 0x0f, gain);
+ }
/* load registers to sensor (Bit 0, auto clear) */
reg_w(gspca_dev, 0x11, 0x01);
- PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors);
}
-static void setautogain(struct gspca_dev *gspca_dev)
+static void setexposure(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ __u8 reg;
+
+ /* register 2 of frame 3/4 contains the clock divider configuring the
+ no fps according to the formula: 60 / reg. sd->exposure is the
+ desired exposure time in ms. */
+ reg = 120 * sd->exposure / 1000;
+ if (reg < 2)
+ reg = 2;
+ else if (reg > 63)
+ reg = 63;
+
+ if (sd->sensor == SENSOR_PAC7302) {
+ /* On the pac7302 reg2 MUST be a multiple of 3, so round it to
+ the nearest multiple of 3, except when between 6 and 12? */
+ if (reg < 6 || reg > 12)
+ reg = ((reg + 1) / 3) * 3;
+ reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
+ reg_w(gspca_dev, 0x02, reg);
+ } else {
+ reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
+ reg_w(gspca_dev, 0x02, reg);
+ /* Page 1 register 8 must always be 0x08 except when not in
+ 640x480 mode and Page3/4 reg 2 <= 3 then it must be 9 */
+ reg_w(gspca_dev, 0xff, 0x01);
+ if (gspca_dev->cam.cam_mode[(int)gspca_dev->curr_mode].priv &&
+ reg <= 3)
+ reg_w(gspca_dev, 0x08, 0x09);
+ else
+ reg_w(gspca_dev, 0x08, 0x08);
+ }
+ /* load registers to sensor (Bit 0, auto clear) */
+ reg_w(gspca_dev, 0x11, 0x01);
+}
- if (sd->autogain) {
- sd->lum_sum = 0;
- sd->ag_cnt = AG_CNT_START;
+static void sethvflip(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ __u8 data;
+
+ if (sd->sensor == SENSOR_PAC7302) {
+ reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
+ data = (sd->hflip ? 0x08 : 0x00)
+ | (sd->vflip ? 0x04 : 0x00);
} else {
- sd->ag_cnt = -1;
+ reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
+ data = (sd->hflip ? 0x04 : 0x00)
+ | (sd->vflip ? 0x08 : 0x00);
}
+ reg_w(gspca_dev, 0x21, data);
+ /* load registers to sensor (Bit 0, auto clear) */
+ reg_w(gspca_dev, 0x11, 0x01);
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
- reg_w(gspca_dev, 0x78, 0x00); /* Turn on LED */
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->sensor == SENSOR_PAC7302)
+ reg_w_seq(gspca_dev, init_7302, sizeof init_7302);
+ else
+ reg_w_seq(gspca_dev, init_7311, sizeof init_7311);
+
return 0;
}
static void sd_start(struct gspca_dev *gspca_dev)
{
- reg_w(gspca_dev, 0xff, 0x01);
- reg_w_buf(gspca_dev, 0x0002, "\x48\x0a\x40\x08\x00\x00\x08\x00", 8);
- reg_w_buf(gspca_dev, 0x000a, "\x06\xff\x11\xff\x5a\x30\x90\x4c", 8);
- reg_w_buf(gspca_dev, 0x0012, "\x00\x07\x00\x0a\x10\x00\xa0\x10", 8);
- reg_w_buf(gspca_dev, 0x001a, "\x02\x00\x00\x00\x00\x0b\x01\x00", 8);
- reg_w_buf(gspca_dev, 0x0022, "\x00\x00\x00\x00\x00\x00\x00\x00", 8);
- reg_w_buf(gspca_dev, 0x002a, "\x00\x00\x00", 3);
- reg_w_buf(gspca_dev, 0x003e, "\x00\x00\x78\x52\x4a\x52\x78\x6e", 8);
- reg_w_buf(gspca_dev, 0x0046, "\x48\x46\x48\x6e\x5f\x49\x42\x49", 8);
- reg_w_buf(gspca_dev, 0x004e, "\x5f\x5f\x49\x42\x49\x5f\x6e\x48", 8);
- reg_w_buf(gspca_dev, 0x0056, "\x46\x48\x6e\x78\x52\x4a\x52\x78", 8);
- reg_w_buf(gspca_dev, 0x005e, "\x00\x00\x09\x1b\x34\x49\x5c\x9b", 8);
- reg_w_buf(gspca_dev, 0x0066, "\xd0\xff", 2);
- reg_w_buf(gspca_dev, 0x0078, "\x44\x00\xf2\x01\x01\x80", 6);
- reg_w_buf(gspca_dev, 0x007f, "\x2a\x1c\x00\xc8\x02\x58\x03\x84", 8);
- reg_w_buf(gspca_dev, 0x0087, "\x12\x00\x1a\x04\x08\x0c\x10\x14", 8);
- reg_w_buf(gspca_dev, 0x008f, "\x18\x20", 2);
- reg_w_buf(gspca_dev, 0x0096, "\x01\x08\x04", 3);
- reg_w_buf(gspca_dev, 0x00a0, "\x44\x44\x44\x04", 4);
- reg_w_buf(gspca_dev, 0x00f0, "\x01\x00\x00\x00\x22\x00\x20\x00", 8);
- reg_w_buf(gspca_dev, 0x00f8, "\x3f\x00\x0a\x01\x00", 5);
+ struct sd *sd = (struct sd *) gspca_dev;
- reg_w(gspca_dev, 0xff, 0x04);
- reg_w(gspca_dev, 0x02, 0x04);
- reg_w(gspca_dev, 0x03, 0x54);
- reg_w(gspca_dev, 0x04, 0x07);
- reg_w(gspca_dev, 0x05, 0x2b);
- reg_w(gspca_dev, 0x06, 0x09);
- reg_w(gspca_dev, 0x07, 0x0f);
- reg_w(gspca_dev, 0x08, 0x09);
- reg_w(gspca_dev, 0x09, 0x00);
- reg_w(gspca_dev, 0x0c, 0x07);
- reg_w(gspca_dev, 0x0d, 0x00);
- reg_w(gspca_dev, 0x0e, 0x00);
- reg_w(gspca_dev, 0x0f, 0x62);
- reg_w(gspca_dev, 0x10, 0x08);
- reg_w(gspca_dev, 0x12, 0x07);
- reg_w(gspca_dev, 0x13, 0x00);
- reg_w(gspca_dev, 0x14, 0x00);
- reg_w(gspca_dev, 0x15, 0x00);
- reg_w(gspca_dev, 0x16, 0x00);
- reg_w(gspca_dev, 0x17, 0x00);
- reg_w(gspca_dev, 0x18, 0x00);
- reg_w(gspca_dev, 0x19, 0x00);
- reg_w(gspca_dev, 0x1a, 0x00);
- reg_w(gspca_dev, 0x1b, 0x03);
- reg_w(gspca_dev, 0x1c, 0xa0);
- reg_w(gspca_dev, 0x1d, 0x01);
- reg_w(gspca_dev, 0x1e, 0xf4);
- reg_w(gspca_dev, 0x21, 0x00);
- reg_w(gspca_dev, 0x22, 0x08);
- reg_w(gspca_dev, 0x24, 0x03);
- reg_w(gspca_dev, 0x26, 0x00);
- reg_w(gspca_dev, 0x27, 0x01);
- reg_w(gspca_dev, 0x28, 0xca);
- reg_w(gspca_dev, 0x29, 0x10);
- reg_w(gspca_dev, 0x2a, 0x06);
- reg_w(gspca_dev, 0x2b, 0x78);
- reg_w(gspca_dev, 0x2c, 0x00);
- reg_w(gspca_dev, 0x2d, 0x00);
- reg_w(gspca_dev, 0x2e, 0x00);
- reg_w(gspca_dev, 0x2f, 0x00);
- reg_w(gspca_dev, 0x30, 0x23);
- reg_w(gspca_dev, 0x31, 0x28);
- reg_w(gspca_dev, 0x32, 0x04);
- reg_w(gspca_dev, 0x33, 0x11);
- reg_w(gspca_dev, 0x34, 0x00);
- reg_w(gspca_dev, 0x35, 0x00);
- reg_w(gspca_dev, 0x11, 0x01);
- setcontrast(gspca_dev);
- setbrightness(gspca_dev);
- setcolors(gspca_dev);
- setautogain(gspca_dev);
+ sd->sof_read = 0;
+
+ if (sd->sensor == SENSOR_PAC7302) {
+ reg_w_var(gspca_dev, start_7302);
+ setbrightcont(gspca_dev);
+ setcolors(gspca_dev);
+ } else {
+ reg_w_var(gspca_dev, start_7311);
+ setcontrast(gspca_dev);
+ }
+ setgain(gspca_dev);
+ setexposure(gspca_dev);
+ sethvflip(gspca_dev);
/* set correct resolution */
switch (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv) {
- case 2: /* 160x120 */
- reg_w(gspca_dev, 0xff, 0x04);
- reg_w(gspca_dev, 0x02, 0x03);
+ case 2: /* 160x120 pac7311 */
reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x08, 0x09);
reg_w(gspca_dev, 0x17, 0x20);
- reg_w(gspca_dev, 0x1b, 0x00);
-/* reg_w(gspca_dev, 0x80, 0x69); */
reg_w(gspca_dev, 0x87, 0x10);
break;
- case 1: /* 320x240 */
- reg_w(gspca_dev, 0xff, 0x04);
- reg_w(gspca_dev, 0x02, 0x03);
+ case 1: /* 320x240 pac7311 */
reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x08, 0x09);
reg_w(gspca_dev, 0x17, 0x30);
-/* reg_w(gspca_dev, 0x80, 0x3f); */
reg_w(gspca_dev, 0x87, 0x11);
break;
case 0: /* 640x480 */
- reg_w(gspca_dev, 0xff, 0x04);
- reg_w(gspca_dev, 0x02, 0x03);
+ if (sd->sensor == SENSOR_PAC7302)
+ break;
reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x08, 0x08);
reg_w(gspca_dev, 0x17, 0x00);
-/* reg_w(gspca_dev, 0x80, 0x1c); */
reg_w(gspca_dev, 0x87, 0x12);
break;
}
+ sd->sof_read = 0;
+ sd->autogain_ignore_frames = 0;
+ atomic_set(&sd->avg_lum, -1);
+
/* start stream */
reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x78, 0x04);
- reg_w(gspca_dev, 0x78, 0x05);
+ if (sd->sensor == SENSOR_PAC7302)
+ reg_w(gspca_dev, 0x78, 0x01);
+ else
+ reg_w(gspca_dev, 0x78, 0x05);
}
static void sd_stopN(struct gspca_dev *gspca_dev)
{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->sensor == SENSOR_PAC7302) {
+ reg_w(gspca_dev, 0xff, 0x01);
+ reg_w(gspca_dev, 0x78, 0x00);
+ reg_w(gspca_dev, 0x78, 0x00);
+ return;
+ }
reg_w(gspca_dev, 0xff, 0x04);
reg_w(gspca_dev, 0x27, 0x80);
reg_w(gspca_dev, 0x28, 0xca);
reg_w(gspca_dev, 0x2a, 0x0e);
reg_w(gspca_dev, 0xff, 0x01);
reg_w(gspca_dev, 0x3e, 0x20);
- reg_w(gspca_dev, 0x78, 0x04); /* Bit_0=start stream, Bit_7=LED */
- reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
- reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
+ reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
+ reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
+ reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
}
static void sd_stop0(struct gspca_dev *gspca_dev)
{
-}
+ struct sd *sd = (struct sd *) gspca_dev;
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
- reg_w(gspca_dev, 0xff, 0x04);
- reg_w(gspca_dev, 0x27, 0x80);
- reg_w(gspca_dev, 0x28, 0xca);
- reg_w(gspca_dev, 0x29, 0x53);
- reg_w(gspca_dev, 0x2a, 0x0e);
- reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x3e, 0x20);
- reg_w(gspca_dev, 0x78, 0x04); /* Bit_0=start stream, Bit_7=LED */
- reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
- reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
+ if (sd->sensor == SENSOR_PAC7302) {
+ reg_w(gspca_dev, 0xff, 0x01);
+ reg_w(gspca_dev, 0x78, 0x40);
+ }
}
+/* Include pac common sof detection functions */
+#include "pac_common.h"
+
static void do_autogain(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int luma;
- int luma_mean = 128;
- int luma_delta = 20;
- __u8 spring = 5;
- int Gbright;
+ int avg_lum = atomic_read(&sd->avg_lum);
+ int desired_lum, deadzone;
- if (!atomic_read(&sd->do_gain))
+ if (avg_lum == -1)
return;
- atomic_set(&sd->do_gain, 0);
-
- luma = atomic_read(&sd->avg_lum);
- Gbright = reg_r(gspca_dev, 0x02);
- PDEBUG(D_FRAM, "luma mean %d", luma);
- if (luma < luma_mean - luma_delta ||
- luma > luma_mean + luma_delta) {
- Gbright += (luma_mean - luma) >> spring;
- if (Gbright > 0x1a)
- Gbright = 0x1a;
- else if (Gbright < 4)
- Gbright = 4;
- PDEBUG(D_FRAM, "gbright %d", Gbright);
- reg_w(gspca_dev, 0xff, 0x04);
- reg_w(gspca_dev, 0x0f, Gbright);
- /* load registers to sensor (Bit 0, auto clear) */
- reg_w(gspca_dev, 0x11, 0x01);
+
+ if (sd->sensor == SENSOR_PAC7302) {
+ desired_lum = 270 + sd->brightness * 4;
+ /* Hack hack, with the 7202 the first exposure step is
+ pretty large, so if we're about to make the first
+ exposure increase make the deadzone large to avoid
+ oscilating */
+ if (desired_lum > avg_lum && sd->gain == GAIN_DEF &&
+ sd->exposure > EXPOSURE_DEF &&
+ sd->exposure < 42)
+ deadzone = 90;
+ else
+ deadzone = 30;
+ } else {
+ desired_lum = 200;
+ deadzone = 20;
}
+
+ if (sd->autogain_ignore_frames > 0)
+ sd->autogain_ignore_frames--;
+ else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum, desired_lum,
+ deadzone, GAIN_KNEE, EXPOSURE_KNEE))
+ sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES;
}
+static const unsigned char pac7311_jpeg_header1[] = {
+ 0xff, 0xd8, 0xff, 0xc0, 0x00, 0x11, 0x08
+};
+
+static const unsigned char pac7311_jpeg_header2[] = {
+ 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, 0xda,
+ 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00
+};
+
+/* this function is run at interrupt level */
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
int len) /* iso packet length */
{
struct sd *sd = (struct sd *) gspca_dev;
- unsigned char tmpbuf[4];
- int i, p, ffseq;
-
-/* if (len < 5) { */
- if (len < 6) {
-/* gspca_dev->last_packet_type = DISCARD_PACKET; */
- return;
- }
-
- ffseq = sd->ffseq;
-
- for (p = 0; p < len - 6; p++) {
- if ((data[0 + p] == 0xff)
- && (data[1 + p] == 0xff)
- && (data[2 + p] == 0x00)
- && (data[3 + p] == 0xff)
- && (data[4 + p] == 0x96)) {
-
- /* start of frame */
- if (sd->ag_cnt >= 0 && p > 28) {
- sd->lum_sum += data[p - 23];
- if (--sd->ag_cnt < 0) {
- sd->ag_cnt = AG_CNT_START;
- atomic_set(&sd->avg_lum,
- sd->lum_sum / AG_CNT_START);
- sd->lum_sum = 0;
- atomic_set(&sd->do_gain, 1);
- }
- }
+ unsigned char *sof;
+
+ sof = pac_find_sof(gspca_dev, data, len);
+ if (sof) {
+ unsigned char tmpbuf[4];
+ int n, lum_offset, footer_length;
+
+ if (sd->sensor == SENSOR_PAC7302) {
+ /* 6 bytes after the FF D9 EOF marker a number of lumination
+ bytes are send corresponding to different parts of the
+ image, the 14th and 15th byte after the EOF seem to
+ correspond to the center of the image */
+ lum_offset = 61 + sizeof pac_sof_marker;
+ footer_length = 74;
+ } else {
+ lum_offset = 24 + sizeof pac_sof_marker;
+ footer_length = 26;
+ }
- /* copy the end of data to the current frame */
+ /* Finish decoding current frame */
+ n = (sof - data) - (footer_length + sizeof pac_sof_marker);
+ if (n < 0) {
+ frame->data_end += n;
+ n = 0;
+ }
+ frame = gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+ data, n);
+ if (gspca_dev->last_packet_type != DISCARD_PACKET &&
+ frame->data_end[-2] == 0xff &&
+ frame->data_end[-1] == 0xd9)
frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
- data, p);
-
- /* put the JPEG header in the new frame */
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
- (unsigned char *) pac7311_jpeg_header,
- 12);
+ NULL, 0);
+
+ n = sof - data;
+ len -= n;
+ data = sof;
+
+ /* Get average lumination */
+ if (gspca_dev->last_packet_type == LAST_PACKET &&
+ n >= lum_offset)
+ atomic_set(&sd->avg_lum, data[-lum_offset] +
+ data[-lum_offset + 1]);
+ else
+ atomic_set(&sd->avg_lum, -1);
+
+ /* Start the new frame with the jpeg header */
+ gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+ pac7311_jpeg_header1, sizeof(pac7311_jpeg_header1));
+ if (sd->sensor == SENSOR_PAC7302) {
+ /* The PAC7302 has the image rotated 90 degrees */
+ tmpbuf[0] = gspca_dev->width >> 8;
+ tmpbuf[1] = gspca_dev->width & 0xff;
+ tmpbuf[2] = gspca_dev->height >> 8;
+ tmpbuf[3] = gspca_dev->height & 0xff;
+ } else {
tmpbuf[0] = gspca_dev->height >> 8;
tmpbuf[1] = gspca_dev->height & 0xff;
tmpbuf[2] = gspca_dev->width >> 8;
tmpbuf[3] = gspca_dev->width & 0xff;
- gspca_frame_add(gspca_dev, INTER_PACKET, frame,
- tmpbuf, 4);
- gspca_frame_add(gspca_dev, INTER_PACKET, frame,
- (unsigned char *) &pac7311_jpeg_header[16],
- PAC7311_JPEG_HEADER_SIZE - 16);
-
- data += p + 7;
- len -= p + 7;
- ffseq = 0;
- break;
}
+ gspca_frame_add(gspca_dev, INTER_PACKET, frame, tmpbuf, 4);
+ gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+ pac7311_jpeg_header2, sizeof(pac7311_jpeg_header2));
}
-
- /* remove the 'ff ff ff xx' sequences */
- switch (ffseq) {
- case 3:
- data += 1;
- len -= 1;
- break;
- case 2:
- if (data[0] == 0xff) {
- data += 2;
- len -= 2;
- frame->data_end -= 2;
- }
- break;
- case 1:
- if (data[0] == 0xff
- && data[1] == 0xff) {
- data += 3;
- len -= 3;
- frame->data_end -= 1;
- }
- break;
- }
- for (i = 0; i < len - 4; i++) {
- if (data[i] == 0xff
- && data[i + 1] == 0xff
- && data[i + 2] == 0xff) {
- memmove(&data[i], &data[i + 4], len - i - 4);
- len -= 4;
- }
- }
- ffseq = 0;
- if (data[len - 4] == 0xff) {
- if (data[len - 3] == 0xff
- && data[len - 2] == 0xff) {
- len -= 4;
- }
- } else if (data[len - 3] == 0xff) {
- if (data[len - 2] == 0xff
- && data[len - 1] == 0xff)
- ffseq = 3;
- } else if (data[len - 2] == 0xff) {
- if (data[len - 1] == 0xff)
- ffseq = 2;
- } else if (data[len - 1] == 0xff)
- ffseq = 1;
- sd->ffseq = ffseq;
gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
}
-static void getbrightness(struct gspca_dev *gspca_dev)
-{
-/* sd->brightness = reg_r(gspca_dev, 0x08);
- return sd->brightness; */
-/* PDEBUG(D_CONF, "Called pac7311_getbrightness: Not implemented yet"); */
-}
-
-
-
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
sd->brightness = val;
if (gspca_dev->streaming)
- setbrightness(gspca_dev);
+ setbrightcont(gspca_dev);
return 0;
}
{
struct sd *sd = (struct sd *) gspca_dev;
- getbrightness(gspca_dev);
*val = sd->brightness;
return 0;
}
struct sd *sd = (struct sd *) gspca_dev;
sd->contrast = val;
- if (gspca_dev->streaming)
- setcontrast(gspca_dev);
+ if (gspca_dev->streaming) {
+ if (sd->sensor == SENSOR_PAC7302)
+ setbrightcont(gspca_dev);
+ else
+ setcontrast(gspca_dev);
+ }
return 0;
}
{
struct sd *sd = (struct sd *) gspca_dev;
-/* getcontrast(gspca_dev); */
*val = sd->contrast;
return 0;
}
{
struct sd *sd = (struct sd *) gspca_dev;
-/* getcolors(gspca_dev); */
*val = sd->colors;
return 0;
}
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->gain = val;
+ if (gspca_dev->streaming)
+ setgain(gspca_dev);
+ return 0;
+}
+
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->gain;
+ return 0;
+}
+
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->exposure = val;
+ if (gspca_dev->streaming)
+ setexposure(gspca_dev);
+ return 0;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->exposure;
+ return 0;
+}
+
static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
sd->autogain = val;
- if (gspca_dev->streaming)
- setautogain(gspca_dev);
+ /* when switching to autogain set defaults to make sure
+ we are on a valid point of the autogain gain /
+ exposure knee graph, and give this change time to
+ take effect before doing autogain. */
+ if (sd->autogain) {
+ sd->exposure = EXPOSURE_DEF;
+ sd->gain = GAIN_DEF;
+ if (gspca_dev->streaming) {
+ sd->autogain_ignore_frames =
+ PAC_AUTOGAIN_IGNORE_FRAMES;
+ setexposure(gspca_dev);
+ setgain(gspca_dev);
+ }
+ }
+
return 0;
}
return 0;
}
+static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->hflip = val;
+ if (gspca_dev->streaming)
+ sethvflip(gspca_dev);
+ return 0;
+}
+
+static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->hflip;
+ return 0;
+}
+
+static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->vflip = val;
+ if (gspca_dev->streaming)
+ sethvflip(gspca_dev);
+ return 0;
+}
+
+static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->vflip;
+ return 0;
+}
+
/* sub-driver description */
static struct sd_desc sd_desc = {
.name = MODULE_NAME,
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
.stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
.dq_callback = do_autogain,
};
/* -- module initialisation -- */
static __devinitdata struct usb_device_id device_table[] = {
- {USB_DEVICE(0x093a, 0x2600)},
- {USB_DEVICE(0x093a, 0x2601)},
- {USB_DEVICE(0x093a, 0x2603)},
- {USB_DEVICE(0x093a, 0x2608)},
- {USB_DEVICE(0x093a, 0x260e)},
- {USB_DEVICE(0x093a, 0x260f)},
- {USB_DEVICE(0x093a, 0x2621)},
+ {USB_DEVICE(0x093a, 0x2600), .driver_info = SENSOR_PAC7311},
+ {USB_DEVICE(0x093a, 0x2601), .driver_info = SENSOR_PAC7311},
+ {USB_DEVICE(0x093a, 0x2603), .driver_info = SENSOR_PAC7311},
+ {USB_DEVICE(0x093a, 0x2608), .driver_info = SENSOR_PAC7311},
+ {USB_DEVICE(0x093a, 0x260e), .driver_info = SENSOR_PAC7311},
+ {USB_DEVICE(0x093a, 0x260f), .driver_info = SENSOR_PAC7311},
+ {USB_DEVICE(0x093a, 0x2621), .driver_info = SENSOR_PAC7302},
+ {USB_DEVICE(0x093a, 0x2624), .driver_info = SENSOR_PAC7302},
+ {USB_DEVICE(0x093a, 0x2626), .driver_info = SENSOR_PAC7302},
{}
};
MODULE_DEVICE_TABLE(usb, device_table);
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
--- /dev/null
+/*
+ * Pixart PAC207BCA / PAC73xx common functions
+ *
+ * Copyright (C) 2008 Hans de Goede <j.w.r.degoede@hhs.nl>
+ * Copyright (C) 2005 Thomas Kaiser thomas@kaiser-linux.li
+ * Copyleft (C) 2005 Michel Xhaard mxhaard@magic.fr
+ *
+ * V4L2 by Jean-Francois Moine <http://moinejf.free.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+/* We calculate the autogain at the end of the transfer of a frame, at this
+ moment a frame with the old settings is being transmitted, and a frame is
+ being captured with the old settings. So if we adjust the autogain we must
+ ignore atleast the 2 next frames for the new settings to come into effect
+ before doing any other adjustments */
+#define PAC_AUTOGAIN_IGNORE_FRAMES 3
+
+static const unsigned char pac_sof_marker[5] =
+ { 0xff, 0xff, 0x00, 0xff, 0x96 };
+
+static unsigned char *pac_find_sof(struct gspca_dev *gspca_dev,
+ unsigned char *m, int len)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int i;
+
+ /* Search for the SOF marker (fixed part) in the header */
+ for (i = 0; i < len; i++) {
+ if (m[i] == pac_sof_marker[sd->sof_read]) {
+ sd->sof_read++;
+ if (sd->sof_read == sizeof(pac_sof_marker)) {
+ PDEBUG(D_FRAM,
+ "SOF found, bytes to analyze: %u."
+ " Frame starts at byte #%u",
+ len, i + 1);
+ sd->sof_read = 0;
+ return m + i + 1;
+ }
+ } else {
+ sd->sof_read = 0;
+ }
+ }
+
+ return NULL;
+}
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+/* Some documentation on known sonixb registers:
+
+Reg Use
+0x10 high nibble red gain low nibble blue gain
+0x11 low nibble green gain
+0x12 hstart
+0x13 vstart
+0x15 hsize (hsize = register-value * 16)
+0x16 vsize (vsize = register-value * 16)
+0x17 bit 0 toggle compression quality (according to sn9c102 driver)
+0x18 bit 7 enables compression, bit 4-5 set image down scaling:
+ 00 scale 1, 01 scale 1/2, 10, scale 1/4
+0x19 high-nibble is sensor clock divider, changes exposure on sensors which
+ use a clock generated by the bridge. Some sensors have their own clock.
+0x1c auto_exposure area (for avg_lum) startx (startx = register-value * 32)
+0x1d auto_exposure area (for avg_lum) starty (starty = register-value * 32)
+0x1e auto_exposure area (for avg_lum) stopx (hsize = (0x1e - 0x1c) * 32)
+0x1f auto_exposure area (for avg_lum) stopy (vsize = (0x1f - 0x1d) * 32)
+*/
+
#define MODULE_NAME "sonixb"
#include "gspca.h"
/* specific webcam descriptor */
struct sd {
struct gspca_dev gspca_dev; /* !! must be the first item */
-
- struct sd_desc sd_desc; /* our nctrls differ dependend upon the
- sensor, so we use a per cam copy */
atomic_t avg_lum;
+ int prev_avg_lum;
unsigned char gain;
unsigned char exposure;
unsigned char frames_to_drop;
unsigned char freq; /* light freq filter setting */
- unsigned char fr_h_sz; /* size of frame header */
- char sensor; /* Type of image sensor chip */
+ __u8 bridge; /* Type of bridge */
+#define BRIDGE_101 0
+#define BRIDGE_102 0 /* We make no difference between 101 and 102 */
+#define BRIDGE_103 1
+
+ __u8 sensor; /* Type of image sensor chip */
#define SENSOR_HV7131R 0
#define SENSOR_OV6650 1
#define SENSOR_OV7630 2
#define SENSOR_PAS202 4
#define SENSOR_TAS5110 5
#define SENSOR_TAS5130CXX 6
- char sensor_has_gain;
- __u8 sensor_addr;
__u8 reg11;
};
-/* flags used in the device id table */
+typedef const __u8 sensor_init_t[8];
+
+struct sensor_data {
+ const __u8 *bridge_init[2];
+ int bridge_init_size[2];
+ sensor_init_t *sensor_init;
+ int sensor_init_size;
+ sensor_init_t *sensor_bridge_init[2];
+ int sensor_bridge_init_size[2];
+ int flags;
+ unsigned ctrl_dis;
+ __u8 sensor_addr;
+};
+
+/* sensor_data flags */
#define F_GAIN 0x01 /* has gain */
-#define F_AUTO 0x02 /* has autogain */
-#define F_SIF 0x04 /* sif or vga */
-#define F_H18 0x08 /* long (18 b) or short (12 b) frame header */
+#define F_SIF 0x02 /* sif or vga */
+
+/* priv field of struct v4l2_pix_format flags (do not use low nibble!) */
+#define MODE_RAW 0x10 /* raw bayer mode */
+#define MODE_REDUCED_SIF 0x20 /* vga mode (320x240 / 160x120) on sif cam */
+
+/* ctrl_dis helper macros */
+#define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX))
+#define NO_FREQ (1 << FREQ_IDX)
+#define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX)
#define COMP2 0x8f
#define COMP 0xc7 /* 0x87 //0x07 */
#define SYS_CLK 0x04
+#define SENS(bridge_1, bridge_3, sensor, sensor_1, \
+ sensor_3, _flags, _ctrl_dis, _sensor_addr) \
+{ \
+ .bridge_init = { bridge_1, bridge_3 }, \
+ .bridge_init_size = { sizeof(bridge_1), sizeof(bridge_3) }, \
+ .sensor_init = sensor, \
+ .sensor_init_size = sizeof(sensor), \
+ .sensor_bridge_init = { sensor_1, sensor_3,}, \
+ .sensor_bridge_init_size = { sizeof(sensor_1), sizeof(sensor_3)}, \
+ .flags = _flags, .ctrl_dis = _ctrl_dis, .sensor_addr = _sensor_addr \
+}
+
/* We calculate the autogain at the end of the transfer of a frame, at this
moment a frame with the old settings is being transmitted, and a frame is
being captured with the old settings. So if we adjust the autogain we must
static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
static struct ctrl sd_ctrls[] = {
+#define BRIGHTNESS_IDX 0
{
{
.id = V4L2_CID_BRIGHTNESS,
.set = sd_setbrightness,
.get = sd_getbrightness,
},
+#define GAIN_IDX 1
{
{
.id = V4L2_CID_GAIN,
.set = sd_setgain,
.get = sd_getgain,
},
+#define EXPOSURE_IDX 2
{
{
.id = V4L2_CID_EXPOSURE,
.set = sd_setexposure,
.get = sd_getexposure,
},
+#define AUTOGAIN_IDX 3
{
{
.id = V4L2_CID_AUTOGAIN,
.set = sd_setautogain,
.get = sd_getautogain,
},
+#define FREQ_IDX 4
{
{
.id = V4L2_CID_POWER_LINE_FREQUENCY,
};
static struct v4l2_pix_format vga_mode[] = {
+ {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 160,
+ .sizeimage = 160 * 120 * 5 / 4,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 2 | MODE_RAW},
{160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
.bytesperline = 160,
- .sizeimage = 160 * 120,
+ .sizeimage = 160 * 120 * 5 / 4,
.colorspace = V4L2_COLORSPACE_SRGB,
.priv = 2},
{320, 240, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
.bytesperline = 320,
- .sizeimage = 320 * 240,
+ .sizeimage = 320 * 240 * 5 / 4,
.colorspace = V4L2_COLORSPACE_SRGB,
.priv = 1},
{640, 480, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
.bytesperline = 640,
- .sizeimage = 640 * 480,
+ .sizeimage = 640 * 480 * 5 / 4,
.colorspace = V4L2_COLORSPACE_SRGB,
.priv = 0},
};
static struct v4l2_pix_format sif_mode[] = {
+ {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 160,
+ .sizeimage = 160 * 120,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1 | MODE_RAW | MODE_REDUCED_SIF},
+ {160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
+ .bytesperline = 160,
+ .sizeimage = 160 * 120 * 5 / 4,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1 | MODE_REDUCED_SIF},
+ {176, 144, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 176,
+ .sizeimage = 176 * 144 * 5 / 4,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1 | MODE_RAW},
{176, 144, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
.bytesperline = 176,
- .sizeimage = 176 * 144,
+ .sizeimage = 176 * 144 * 5 / 4,
.colorspace = V4L2_COLORSPACE_SRGB,
.priv = 1},
+ {320, 240, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 240 * 5 / 4,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0 | MODE_REDUCED_SIF},
{352, 288, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
.bytesperline = 352,
- .sizeimage = 352 * 288,
+ .sizeimage = 352 * 288 * 5 / 4,
.colorspace = V4L2_COLORSPACE_SRGB,
.priv = 0},
};
static const __u8 initHv7131[] = {
0x46, 0x77, 0x00, 0x04, 0x00, 0x00, 0x00, 0x80, 0x11, 0x00, 0x00, 0x00,
0x00, 0x00,
- 0x00, 0x00, 0x00, 0x03, 0x01, 0x00, /* shift from 0x02 0x01 0x00 */
+ 0x00, 0x00, 0x00, 0x02, 0x01, 0x00,
0x28, 0x1e, 0x60, 0x8a, 0x20,
0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c
};
static const __u8 initOv6650[] = {
0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x02, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x0b,
- 0x10, 0x1d, 0x10, 0x00, 0x06, 0x1f, 0x00
+ 0x00, 0x01, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x8b,
+ 0x10, 0x1d, 0x10, 0x02, 0x02, 0x09, 0x07
};
static const __u8 ov6650_sensor_init[][8] =
{
static const __u8 initOv7630[] = {
0x04, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, /* r01 .. r08 */
0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r09 .. r10 */
- 0x00, 0x02, 0x01, 0x0a, /* r11 .. r14 */
+ 0x00, 0x01, 0x01, 0x0a, /* r11 .. r14 */
0x28, 0x1e, /* H & V sizes r15 .. r16 */
- 0x68, COMP1, MCK_INIT1, /* r17 .. r19 */
+ 0x68, COMP2, MCK_INIT1, /* r17 .. r19 */
0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c /* r1a .. r1f */
};
static const __u8 initOv7630_3[] = {
0x44, 0x44, 0x00, 0x1a, 0x20, 0x20, 0x20, 0x80, /* r01 .. r08 */
0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, /* r09 .. r10 */
- 0x00, 0x01, 0x01, 0x0a, /* r11 .. r14 */
+ 0x00, 0x02, 0x01, 0x0a, /* r11 .. r14 */
0x28, 0x1e, /* H & V sizes r15 .. r16 */
0x68, 0x8f, MCK_INIT1, /* r17 .. r19 */
0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c, 0x00, /* r1a .. r20 */
{0xd0, 0x21, 0x17, 0x1c, 0xbd, 0x06, 0xf6, 0x10},
};
+static const __u8 ov7630_sensor_init_3[][8] = {
+ {0xa0, 0x21, 0x13, 0x80, 0x00, 0x00, 0x00, 0x10},
+};
+
static const __u8 initPas106[] = {
0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x40, 0x00, 0x00, 0x00,
0x00, 0x00,
- 0x00, 0x00, 0x00, 0x05, 0x01, 0x00,
- 0x16, 0x12, 0x28, COMP1, MCK_INIT1,
- 0x18, 0x10, 0x04, 0x03, 0x11, 0x0c
+ 0x00, 0x00, 0x00, 0x04, 0x01, 0x00,
+ 0x16, 0x12, 0x24, COMP1, MCK_INIT1,
+ 0x18, 0x10, 0x02, 0x02, 0x09, 0x07
};
/* compression 0x86 mckinit1 0x2b */
-static const __u8 pas106_data[][2] = {
- {0x02, 0x04}, /* Pixel Clock Divider 6 */
- {0x03, 0x13}, /* Frame Time MSB */
-/* {0x03, 0x12}, * Frame Time MSB */
- {0x04, 0x06}, /* Frame Time LSB */
-/* {0x04, 0x05}, * Frame Time LSB */
- {0x05, 0x65}, /* Shutter Time Line Offset */
-/* {0x05, 0x6d}, * Shutter Time Line Offset */
-/* {0x06, 0xb1}, * Shutter Time Pixel Offset */
- {0x06, 0xcd}, /* Shutter Time Pixel Offset */
- {0x07, 0xc1}, /* Black Level Subtract Sign */
-/* {0x07, 0x00}, * Black Level Subtract Sign */
- {0x08, 0x06}, /* Black Level Subtract Level */
- {0x08, 0x06}, /* Black Level Subtract Level */
-/* {0x08, 0x01}, * Black Level Subtract Level */
- {0x09, 0x05}, /* Color Gain B Pixel 5 a */
- {0x0a, 0x04}, /* Color Gain G1 Pixel 1 5 */
- {0x0b, 0x04}, /* Color Gain G2 Pixel 1 0 5 */
- {0x0c, 0x05}, /* Color Gain R Pixel 3 1 */
- {0x0d, 0x00}, /* Color GainH Pixel */
- {0x0e, 0x0e}, /* Global Gain */
- {0x0f, 0x00}, /* Contrast */
- {0x10, 0x06}, /* H&V synchro polarity */
- {0x11, 0x06}, /* ?default */
- {0x12, 0x06}, /* DAC scale */
- {0x14, 0x02}, /* ?default */
- {0x13, 0x01}, /* Validate Settings */
+static const __u8 pas106_sensor_init[][8] = {
+ /* Pixel Clock Divider 6 */
+ { 0xa1, 0x40, 0x02, 0x04, 0x00, 0x00, 0x00, 0x14 },
+ /* Frame Time MSB (also seen as 0x12) */
+ { 0xa1, 0x40, 0x03, 0x13, 0x00, 0x00, 0x00, 0x14 },
+ /* Frame Time LSB (also seen as 0x05) */
+ { 0xa1, 0x40, 0x04, 0x06, 0x00, 0x00, 0x00, 0x14 },
+ /* Shutter Time Line Offset (also seen as 0x6d) */
+ { 0xa1, 0x40, 0x05, 0x65, 0x00, 0x00, 0x00, 0x14 },
+ /* Shutter Time Pixel Offset (also seen as 0xb1) */
+ { 0xa1, 0x40, 0x06, 0xcd, 0x00, 0x00, 0x00, 0x14 },
+ /* Black Level Subtract Sign (also seen 0x00) */
+ { 0xa1, 0x40, 0x07, 0xc1, 0x00, 0x00, 0x00, 0x14 },
+ /* Black Level Subtract Level (also seen 0x01) */
+ { 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 },
+ { 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 },
+ /* Color Gain B Pixel 5 a */
+ { 0xa1, 0x40, 0x09, 0x05, 0x00, 0x00, 0x00, 0x14 },
+ /* Color Gain G1 Pixel 1 5 */
+ { 0xa1, 0x40, 0x0a, 0x04, 0x00, 0x00, 0x00, 0x14 },
+ /* Color Gain G2 Pixel 1 0 5 */
+ { 0xa1, 0x40, 0x0b, 0x04, 0x00, 0x00, 0x00, 0x14 },
+ /* Color Gain R Pixel 3 1 */
+ { 0xa1, 0x40, 0x0c, 0x05, 0x00, 0x00, 0x00, 0x14 },
+ /* Color GainH Pixel */
+ { 0xa1, 0x40, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x14 },
+ /* Global Gain */
+ { 0xa1, 0x40, 0x0e, 0x0e, 0x00, 0x00, 0x00, 0x14 },
+ /* Contrast */
+ { 0xa1, 0x40, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x14 },
+ /* H&V synchro polarity */
+ { 0xa1, 0x40, 0x10, 0x06, 0x00, 0x00, 0x00, 0x14 },
+ /* ?default */
+ { 0xa1, 0x40, 0x11, 0x06, 0x00, 0x00, 0x00, 0x14 },
+ /* DAC scale */
+ { 0xa1, 0x40, 0x12, 0x06, 0x00, 0x00, 0x00, 0x14 },
+ /* ?default */
+ { 0xa1, 0x40, 0x14, 0x02, 0x00, 0x00, 0x00, 0x14 },
+ /* Validate Settings */
+ { 0xa1, 0x40, 0x13, 0x01, 0x00, 0x00, 0x00, 0x14 },
};
+
static const __u8 initPas202[] = {
0x44, 0x44, 0x21, 0x30, 0x00, 0x00, 0x00, 0x80, 0x40, 0x00, 0x00, 0x00,
0x00, 0x00,
- 0x00, 0x00, 0x00, 0x07, 0x03, 0x0a, /* 6 */
- 0x28, 0x1e, 0x28, 0x89, 0x30,
+ 0x00, 0x00, 0x00, 0x06, 0x03, 0x0a,
+ 0x28, 0x1e, 0x28, 0x89, 0x20,
0x00, 0x00, 0x02, 0x03, 0x0f, 0x0c
};
static const __u8 pas202_sensor_init[][8] = {
static const __u8 initTas5110[] = {
0x44, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00,
0x00, 0x00,
- 0x00, 0x01, 0x00, 0x46, 0x09, 0x0a, /* shift from 0x45 0x09 0x0a */
+ 0x00, 0x01, 0x00, 0x45, 0x09, 0x0a,
0x16, 0x12, 0x60, 0x86, 0x2b,
0x14, 0x0a, 0x02, 0x02, 0x09, 0x07
};
static const __u8 initTas5130[] = {
0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00,
0x00, 0x00,
- 0x00, 0x01, 0x00, 0x69, 0x0c, 0x0a,
+ 0x00, 0x01, 0x00, 0x68, 0x0c, 0x0a,
0x28, 0x1e, 0x60, COMP, MCK_INIT,
0x18, 0x10, 0x04, 0x03, 0x11, 0x0c
};
{0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10},
};
+struct sensor_data sensor_data[] = {
+SENS(initHv7131, NULL, hv7131_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0),
+SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60),
+SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3,
+ F_GAIN, 0, 0x21),
+SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_SIF, NO_EXPO|NO_FREQ,
+ 0),
+SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, 0,
+ NO_EXPO|NO_FREQ, 0),
+SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF,
+ NO_BRIGHTNESS|NO_FREQ, 0),
+SENS(initTas5130, NULL, tas5130_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ,
+ 0),
+};
+
/* get one byte in gspca_dev->usb_buf */
static void reg_r(struct gspca_dev *gspca_dev,
__u16 value)
int len)
{
#ifdef GSPCA_DEBUG
- if (len > sizeof gspca_dev->usb_buf) {
+ if (len > USB_BUF_SZ) {
PDEBUG(D_ERR|D_PACK, "reg_w: buffer overflow");
return;
}
500);
}
-static void reg_w_big(struct gspca_dev *gspca_dev,
- __u16 value,
- const __u8 *buffer,
- int len)
-{
- __u8 *tmpbuf;
-
- tmpbuf = kmalloc(len, GFP_KERNEL);
- memcpy(tmpbuf, buffer, len);
- usb_control_msg(gspca_dev->dev,
- usb_sndctrlpipe(gspca_dev->dev, 0),
- 0x08, /* request */
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
- value,
- 0, /* index */
- tmpbuf, len,
- 500);
- kfree(tmpbuf);
-}
-
static int i2c_w(struct gspca_dev *gspca_dev, const __u8 *buffer)
{
int retry = 60;
{0xa0, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x10};
/* change reg 0x06 */
- i2cOV[1] = sd->sensor_addr;
+ i2cOV[1] = sensor_data[sd->sensor].sensor_addr;
i2cOV[3] = sd->brightness;
if (i2c_w(gspca_dev, i2cOV) < 0)
goto err;
goto err;
break;
}
- case SENSOR_TAS5110:
- /* FIXME figure out howto control brightness on TAS5110 */
- break;
}
return;
err:
case SENSOR_OV7630: {
__u8 i2c[] = {0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10};
- i2c[1] = sd->sensor_addr;
+ i2c[1] = sensor_data[sd->sensor].sensor_addr;
i2c[3] = gain >> 2;
if (i2c_w(gspca_dev, i2c) < 0)
goto err;
rgb_value = gain;
reg_w(gspca_dev, 0x11, &rgb_value, 1);
- if (sd->sensor_has_gain)
+ if (sensor_data[sd->sensor].flags & F_GAIN)
setsensorgain(gspca_dev);
}
else if (reg11 > 16)
reg11 = 16;
+ /* In 640x480, if the reg11 has less than 3, the image is
+ unstable (not enough bandwidth). */
+ if (gspca_dev->width == 640 && reg11 < 3)
+ reg11 = 3;
+
/* frame exposure time in ms = 1000 * reg11 / 30 ->
reg10 = sd->exposure * 2 * reg10_max / (1000 * reg11 / 30) */
reg10 = (sd->exposure * 60 * reg10_max) / (1000 * reg11);
else if (reg10 > reg10_max)
reg10 = reg10_max;
- /* In 640x480, if the reg11 has less than 3, the image is
- unstable (not enough bandwidth). */
- if (gspca_dev->width == 640 && reg11 < 3)
- reg11 = 3;
-
/* Write reg 10 and reg11 low nibble */
- i2c[1] = sd->sensor_addr;
+ i2c[1] = sensor_data[sd->sensor].sensor_addr;
i2c[3] = reg10;
i2c[4] |= reg11 - 1;
? 0x4f : 0x8a;
break;
}
- i2c[1] = sd->sensor_addr;
+ i2c[1] = sensor_data[sd->sensor].sensor_addr;
if (i2c_w(gspca_dev, i2c) < 0)
PDEBUG(D_ERR, "i2c error setfreq");
break;
{
struct sd *sd = (struct sd *) gspca_dev;
struct cam *cam;
- int sif = 0;
- /* nctrls depends upon the sensor, so we use a per cam copy */
- memcpy(&sd->sd_desc, gspca_dev->sd_desc, sizeof(struct sd_desc));
- gspca_dev->sd_desc = &sd->sd_desc;
+ reg_r(gspca_dev, 0x00);
+ if (gspca_dev->usb_buf[0] != 0x10)
+ return -ENODEV;
/* copy the webcam info from the device id */
- sd->sensor = (id->driver_info >> 24) & 0xff;
- if (id->driver_info & (F_GAIN << 16))
- sd->sensor_has_gain = 1;
- if (id->driver_info & (F_AUTO << 16))
- sd->sd_desc.dq_callback = do_autogain;
- if (id->driver_info & (F_SIF << 16))
- sif = 1;
- if (id->driver_info & (F_H18 << 16))
- sd->fr_h_sz = 18; /* size of frame header */
- else
- sd->fr_h_sz = 12;
- sd->sd_desc.nctrls = (id->driver_info >> 8) & 0xff;
- sd->sensor_addr = id->driver_info & 0xff;
+ sd->sensor = id->driver_info >> 8;
+ sd->bridge = id->driver_info & 0xff;
+ gspca_dev->ctrl_dis = sensor_data[sd->sensor].ctrl_dis;
cam = &gspca_dev->cam;
cam->epaddr = 0x01;
- if (!sif) {
+ if (!(sensor_data[sd->sensor].flags & F_SIF)) {
cam->cam_mode = vga_mode;
cam->nmodes = ARRAY_SIZE(vga_mode);
} else {
sd->brightness = BRIGHTNESS_DEF;
sd->gain = GAIN_DEF;
sd->exposure = EXPOSURE_DEF;
- sd->autogain = AUTOGAIN_DEF;
+ if (gspca_dev->ctrl_dis & (1 << AUTOGAIN_IDX))
+ sd->autogain = 0; /* Disable do_autogain callback */
+ else
+ sd->autogain = AUTOGAIN_DEF;
sd->freq = FREQ_DEF;
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
- reg_r(gspca_dev, 0x00);
- if (gspca_dev->usb_buf[0] != 0x10)
- return -ENODEV;
- return 0;
-}
+ const __u8 stop = 0x09; /* Disable stream turn of LED */
-static void pas106_i2cinit(struct gspca_dev *gspca_dev)
-{
- int i;
- const __u8 *data;
- __u8 i2c1[] = { 0xa1, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x14 };
-
- i = ARRAY_SIZE(pas106_data);
- data = pas106_data[0];
- while (--i >= 0) {
- memcpy(&i2c1[2], data, 2);
- /* copy 2 bytes from the template */
- if (i2c_w(gspca_dev, i2c1) < 0)
- PDEBUG(D_ERR, "i2c error pas106");
- data += 2;
- }
+ reg_w(gspca_dev, 0x01, &stop, 1);
+
+ return 0;
}
/* -- start the camera -- */
static void sd_start(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int mode, l = 0x1f;
+ struct cam *cam = &gspca_dev->cam;
+ int mode, l;
const __u8 *sn9c10x;
- __u8 reg17_19[3];
-
- mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+ __u8 reg12_19[8];
+
+ mode = cam->cam_mode[gspca_dev->curr_mode].priv & 0x07;
+ sn9c10x = sensor_data[sd->sensor].bridge_init[sd->bridge];
+ l = sensor_data[sd->sensor].bridge_init_size[sd->bridge];
+ memcpy(reg12_19, &sn9c10x[0x12 - 1], 8);
+ reg12_19[6] = sn9c10x[0x18 - 1] | (mode << 4);
+ /* Special cases where reg 17 and or 19 value depends on mode */
switch (sd->sensor) {
- case SENSOR_HV7131R:
- sn9c10x = initHv7131;
- reg17_19[0] = 0x60;
- reg17_19[1] = (mode << 4) | 0x8a;
- reg17_19[2] = 0x20;
- break;
- case SENSOR_OV6650:
- sn9c10x = initOv6650;
- reg17_19[0] = 0x68;
- reg17_19[1] = (mode << 4) | 0x8b;
- reg17_19[2] = 0x20;
- break;
- case SENSOR_OV7630:
- if (sd->fr_h_sz == 18) { /* SN9C103 */
- sn9c10x = initOv7630_3;
- l = sizeof initOv7630_3;
- } else
- sn9c10x = initOv7630;
- reg17_19[0] = 0x68;
- reg17_19[1] = (mode << 4) | COMP2;
- reg17_19[2] = MCK_INIT1;
- break;
- case SENSOR_PAS106:
- sn9c10x = initPas106;
- reg17_19[0] = 0x24; /* 0x28 */
- reg17_19[1] = (mode << 4) | COMP1;
- reg17_19[2] = MCK_INIT1;
- break;
case SENSOR_PAS202:
- sn9c10x = initPas202;
- reg17_19[0] = mode ? 0x24 : 0x20;
- reg17_19[1] = (mode << 4) | 0x89;
- reg17_19[2] = 0x20;
+ reg12_19[5] = mode ? 0x24 : 0x20;
break;
- case SENSOR_TAS5110:
- sn9c10x = initTas5110;
- reg17_19[0] = 0x60;
- reg17_19[1] = (mode << 4) | 0x86;
- reg17_19[2] = 0x2b; /* 0xf3; */
- break;
- default:
-/* case SENSOR_TAS5130CXX: */
- sn9c10x = initTas5130;
- reg17_19[0] = 0x60;
- reg17_19[1] = (mode << 4) | COMP;
- reg17_19[2] = mode ? 0x23 : 0x43;
+ case SENSOR_TAS5130CXX:
+ /* probably not mode specific at all most likely the upper
+ nibble of 0x19 is exposure (clock divider) just as with
+ the tas5110, we need someone to test this. */
+ reg12_19[7] = mode ? 0x23 : 0x43;
break;
}
+ /* Disable compression when the raw bayer format has been selected */
+ if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW)
+ reg12_19[6] &= ~0x80;
+
+ /* Vga mode emulation on SIF sensor? */
+ if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_REDUCED_SIF) {
+ reg12_19[0] += 16; /* 0x12: hstart adjust */
+ reg12_19[1] += 24; /* 0x13: vstart adjust */
+ reg12_19[3] = 320 / 16; /* 0x15: hsize */
+ reg12_19[4] = 240 / 16; /* 0x16: vsize */
+ }
/* reg 0x01 bit 2 video transfert on */
reg_w(gspca_dev, 0x01, &sn9c10x[0x01 - 1], 1);
/* reg 0x17 SensorClk enable inv Clk 0x60 */
reg_w(gspca_dev, 0x17, &sn9c10x[0x17 - 1], 1);
/* Set the registers from the template */
- reg_w_big(gspca_dev, 0x01, sn9c10x, l);
- switch (sd->sensor) {
- case SENSOR_HV7131R:
- i2c_w_vector(gspca_dev, hv7131_sensor_init,
- sizeof hv7131_sensor_init);
- break;
- case SENSOR_OV6650:
- i2c_w_vector(gspca_dev, ov6650_sensor_init,
- sizeof ov6650_sensor_init);
- break;
- case SENSOR_OV7630:
- i2c_w_vector(gspca_dev, ov7630_sensor_init,
- sizeof ov7630_sensor_init);
- if (sd->fr_h_sz == 18) { /* SN9C103 */
- const __u8 i2c[] = { 0xa0, 0x21, 0x13, 0x80, 0x00,
- 0x00, 0x00, 0x10 };
- i2c_w(gspca_dev, i2c);
- }
- break;
- case SENSOR_PAS106:
- pas106_i2cinit(gspca_dev);
- break;
- case SENSOR_PAS202:
- i2c_w_vector(gspca_dev, pas202_sensor_init,
- sizeof pas202_sensor_init);
- break;
- case SENSOR_TAS5110:
- i2c_w_vector(gspca_dev, tas5110_sensor_init,
- sizeof tas5110_sensor_init);
- break;
- default:
-/* case SENSOR_TAS5130CXX: */
- i2c_w_vector(gspca_dev, tas5130_sensor_init,
- sizeof tas5130_sensor_init);
- break;
- }
+ reg_w(gspca_dev, 0x01, sn9c10x, l);
+
+ /* Init the sensor */
+ i2c_w_vector(gspca_dev, sensor_data[sd->sensor].sensor_init,
+ sensor_data[sd->sensor].sensor_init_size);
+ if (sensor_data[sd->sensor].sensor_bridge_init[sd->bridge])
+ i2c_w_vector(gspca_dev,
+ sensor_data[sd->sensor].sensor_bridge_init[sd->bridge],
+ sensor_data[sd->sensor].sensor_bridge_init_size[
+ sd->bridge]);
+
/* H_size V_size 0x28, 0x1e -> 640x480. 0x16, 0x12 -> 352x288 */
- reg_w(gspca_dev, 0x15, &sn9c10x[0x15 - 1], 2);
+ reg_w(gspca_dev, 0x15, ®12_19[3], 2);
/* compression register */
- reg_w(gspca_dev, 0x18, ®17_19[1], 1);
+ reg_w(gspca_dev, 0x18, ®12_19[6], 1);
/* H_start */
- reg_w(gspca_dev, 0x12, &sn9c10x[0x12 - 1], 1);
+ reg_w(gspca_dev, 0x12, ®12_19[0], 1);
/* V_START */
- reg_w(gspca_dev, 0x13, &sn9c10x[0x13 - 1], 1);
+ reg_w(gspca_dev, 0x13, ®12_19[1], 1);
/* reset 0x17 SensorClk enable inv Clk 0x60 */
/*fixme: ov7630 [17]=68 8f (+20 if 102)*/
- reg_w(gspca_dev, 0x17, ®17_19[0], 1);
+ reg_w(gspca_dev, 0x17, ®12_19[5], 1);
/*MCKSIZE ->3 */ /*fixme: not ov7630*/
- reg_w(gspca_dev, 0x19, ®17_19[2], 1);
+ reg_w(gspca_dev, 0x19, ®12_19[7], 1);
/* AE_STRX AE_STRY AE_ENDX AE_ENDY */
reg_w(gspca_dev, 0x1c, &sn9c10x[0x1c - 1], 4);
/* Enable video transfert */
reg_w(gspca_dev, 0x01, &sn9c10x[0], 1);
/* Compression */
- reg_w(gspca_dev, 0x18, ®17_19[1], 2);
+ reg_w(gspca_dev, 0x18, ®12_19[6], 2);
msleep(20);
sd->reg11 = -1;
static void sd_stopN(struct gspca_dev *gspca_dev)
{
- __u8 ByteSend;
-
- ByteSend = 0x09; /* 0X00 */
- reg_w(gspca_dev, 0x01, &ByteSend, 1);
-}
-
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
+ sd_init(gspca_dev);
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
{
int i;
struct sd *sd = (struct sd *) gspca_dev;
+ struct cam *cam = &gspca_dev->cam;
/* frames start with:
* ff ff 00 c4 c4 96 synchro
&& data[5 + i] == 0x96) { /* start of frame */
int lum = -1;
int pkt_type = LAST_PACKET;
+ int fr_h_sz = (sd->bridge == BRIDGE_103) ?
+ 18 : 12;
- if (len - i < sd->fr_h_sz) {
+ if (len - i < fr_h_sz) {
PDEBUG(D_STREAM, "packet too short to"
" get avg brightness");
- } else if (sd->fr_h_sz == 12) {
- lum = data[i + 8] + (data[i + 9] << 8);
- } else {
+ } else if (sd->bridge == BRIDGE_103) {
lum = data[i + 9] +
(data[i + 10] << 8);
+ } else {
+ lum = data[i + 8] + (data[i + 9] << 8);
}
- if (lum == 0) {
+ /* When exposure changes midway a frame we
+ get a lum of 0 in this case drop 2 frames
+ as the frames directly after an exposure
+ change have an unstable image. Sometimes lum
+ *really* is 0 (cam used in low light with
+ low exposure setting), so do not drop frames
+ if the previous lum was 0 too. */
+ if (lum == 0 && sd->prev_avg_lum != 0) {
lum = -1;
sd->frames_to_drop = 2;
- }
+ sd->prev_avg_lum = 0;
+ } else
+ sd->prev_avg_lum = lum;
atomic_set(&sd->avg_lum, lum);
if (sd->frames_to_drop) {
frame = gspca_frame_add(gspca_dev, pkt_type,
frame, data, 0);
- data += i + sd->fr_h_sz;
- len -= i + sd->fr_h_sz;
+ data += i + fr_h_sz;
+ len -= i + fr_h_sz;
gspca_frame_add(gspca_dev, FIRST_PACKET,
frame, data, len);
return;
}
}
}
+
+ if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) {
+ /* In raw mode we sometimes get some garbage after the frame
+ ignore this */
+ int used = frame->data_end - frame->data;
+ int size = cam->cam_mode[gspca_dev->curr_mode].sizeimage;
+
+ if (used + len > size)
+ len = size - used;
+ }
+
gspca_frame_add(gspca_dev, INTER_PACKET,
frame, data, len);
}
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
.querymenu = sd_querymenu,
+ .dq_callback = do_autogain,
};
/* -- module initialisation -- */
-#define SFCI(sensor, flags, nctrls, i2c_addr) \
- .driver_info = (SENSOR_ ## sensor << 24) \
- | ((flags) << 16) \
- | ((nctrls) << 8) \
- | (i2c_addr)
+#define SB(sensor, bridge) \
+ .driver_info = (SENSOR_ ## sensor << 8) | BRIDGE_ ## bridge
+
+
static __devinitdata struct usb_device_id device_table[] = {
-#ifndef CONFIG_USB_SN9C102
- {USB_DEVICE(0x0c45, 0x6001), /* SN9C102 */
- SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
- {USB_DEVICE(0x0c45, 0x6005), /* SN9C101 */
- SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
- {USB_DEVICE(0x0c45, 0x6007), /* SN9C101 */
- SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
- {USB_DEVICE(0x0c45, 0x6009), /* SN9C101 */
- SFCI(PAS106, F_SIF, 2, 0)},
- {USB_DEVICE(0x0c45, 0x600d), /* SN9C101 */
- SFCI(PAS106, F_SIF, 2, 0)},
+ {USB_DEVICE(0x0c45, 0x6001), SB(TAS5110, 102)}, /* TAS5110C1B */
+ {USB_DEVICE(0x0c45, 0x6005), SB(TAS5110, 101)}, /* TAS5110C1B */
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
+ {USB_DEVICE(0x0c45, 0x6007), SB(TAS5110, 101)}, /* TAS5110D */
+ {USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)},
+ {USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)},
#endif
- {USB_DEVICE(0x0c45, 0x6011), /* SN9C101 - SN9C101G */
- SFCI(OV6650, F_GAIN|F_AUTO|F_SIF, 5, 0x60)},
-#ifndef CONFIG_USB_SN9C102
- {USB_DEVICE(0x0c45, 0x6019), /* SN9C101 */
- SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
- {USB_DEVICE(0x0c45, 0x6024), /* SN9C102 */
- SFCI(TAS5130CXX, 0, 2, 0)},
- {USB_DEVICE(0x0c45, 0x6025), /* SN9C102 */
- SFCI(TAS5130CXX, 0, 2, 0)},
- {USB_DEVICE(0x0c45, 0x6028), /* SN9C102 */
- SFCI(PAS202, 0, 2, 0)},
- {USB_DEVICE(0x0c45, 0x6029), /* SN9C101 */
- SFCI(PAS106, F_SIF, 2, 0)},
- {USB_DEVICE(0x0c45, 0x602c), /* SN9C102 */
- SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
- {USB_DEVICE(0x0c45, 0x602d), /* SN9C102 */
- SFCI(HV7131R, 0, 2, 0)},
- {USB_DEVICE(0x0c45, 0x602e), /* SN9C102 */
- SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
- {USB_DEVICE(0x0c45, 0x60af), /* SN9C103 */
- SFCI(PAS202, F_H18, 2, 0)},
- {USB_DEVICE(0x0c45, 0x60b0), /* SN9C103 */
- SFCI(OV7630, F_GAIN|F_AUTO|F_H18, 5, 0x21)},
+ {USB_DEVICE(0x0c45, 0x6011), SB(OV6650, 101)},
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
+ {USB_DEVICE(0x0c45, 0x6019), SB(OV7630, 101)},
+ {USB_DEVICE(0x0c45, 0x6024), SB(TAS5130CXX, 102)},
+ {USB_DEVICE(0x0c45, 0x6025), SB(TAS5130CXX, 102)},
+ {USB_DEVICE(0x0c45, 0x6028), SB(PAS202, 102)},
+ {USB_DEVICE(0x0c45, 0x6029), SB(PAS106, 102)},
+ {USB_DEVICE(0x0c45, 0x602c), SB(OV7630, 102)},
#endif
+ {USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)},
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
+ {USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)},
+#endif
+ {USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)},
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
+ {USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)},
+#endif
+ {USB_DEVICE(0x0c45, 0x60b0), SB(OV7630, 103)},
{}
};
MODULE_DEVICE_TABLE(usb, device_table);
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
#define SENSOR_HV7131R 0
#define SENSOR_MI0360 1
#define SENSOR_MO4000 2
-#define SENSOR_OV7648 3
-#define SENSOR_OV7660 4
+#define SENSOR_OM6802 3
+#define SENSOR_OV7630 4
+#define SENSOR_OV7648 5
+#define SENSOR_OV7660 6
unsigned char i2c_base;
};
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Brightness",
.minimum = 0,
- .maximum = 0xffff,
+#define BRIGHTNESS_MAX 0xffff
+ .maximum = BRIGHTNESS_MAX,
.step = 1,
#define BRIGHTNESS_DEF 0x7fff
.default_value = BRIGHTNESS_DEF,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Contrast",
.minimum = 0,
- .maximum = 127,
+#define CONTRAST_MAX 127
+ .maximum = CONTRAST_MAX,
.step = 1,
#define CONTRAST_DEF 63
.default_value = CONTRAST_DEF,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Color",
.minimum = 0,
- .maximum = 255,
+ .maximum = 64,
.step = 1,
-#define COLOR_DEF 127
+#define COLOR_DEF 32
.default_value = COLOR_DEF,
},
.set = sd_setcolors,
.get = sd_getcolors,
},
+#define AUTOGAIN_IDX 3
{
{
.id = V4L2_CID_AUTOGAIN,
static struct v4l2_pix_format vga_mode[] = {
{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
.bytesperline = 160,
- .sizeimage = 160 * 120 * 3 / 8 + 590,
+ .sizeimage = 160 * 120 * 4 / 8 + 590,
.colorspace = V4L2_COLORSPACE_JPEG,
.priv = 2},
{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
+static const __u8 sn_om6802[] = {
+/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */
+ 0x00, 0x23, 0x72, 0x00, 0x1a, 0x34, 0x27, 0x20,
+/* reg8 reg9 rega regb regc regd rege regf */
+ 0x80, 0x34, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */
+ 0x03, 0x00, 0x51, 0x01, 0x00, 0x28, 0x1e, 0x40,
+/* reg18 reg19 reg1a reg1b reg1c reg1d reg1e reg1f */
+ 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x08, 0x22, 0x44, 0x63, 0x7d, 0x92, 0xa3, 0xaf,
+ 0xbc, 0xc4, 0xcd, 0xd5, 0xdc, 0xe1, 0xe8, 0xef,
+ 0xf7
+};
+
+static const __u8 sn_ov7630[] = {
+/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */
+ 0x00, 0x21, 0x40, 0x00, 0x1a, 0x20, 0x1f, 0x20,
+/* reg8 reg9 rega regb regc regd rege regf */
+ 0xa1, 0x21, 0x76, 0x21, 0x00, 0x00, 0x00, 0x10,
+/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */
+ 0x03, 0x00, 0x04, 0x01, 0x0a, 0x28, 0x1e, 0xc2,
+/* reg18 reg19 reg1a reg1b reg1c reg1d reg1e reg1f */
+ 0x0b, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
static const __u8 sn_ov7648[] = {
/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */
0x00, 0x21, 0x62, 0x00, 0x1a, 0x20, 0x20, 0x20,
sn_hv7131,
sn_mi0360,
sn_mo4000,
+ sn_om6802,
+ sn_ov7630,
sn_ov7648,
sn_ov7660
};
-static const __u8 regsn20[] = {
+static const __u8 gamma_def[] = {
0x00, 0x2d, 0x46, 0x5a, 0x6c, 0x7c, 0x8b, 0x99,
0xa6, 0xb2, 0xbf, 0xca, 0xd5, 0xe0, 0xeb, 0xf5, 0xff
};
-static const __u8 regsn20_sn9c325[] = {
- 0x0a, 0x3a, 0x56, 0x6c, 0x7e, 0x8d, 0x9a, 0xa4,
- 0xaf, 0xbb, 0xc5, 0xcd, 0xd5, 0xde, 0xe8, 0xed, 0xf5
-};
static const __u8 reg84[] = {
0x14, 0x00, 0x27, 0x00, 0x07, 0x00, 0xe5, 0x0f,
0xe4, 0x0f, 0x38, 0x00, 0x3e, 0x00, 0xc3, 0x0f,
-/* 0x00, 0x00, 0x00, 0x00, 0x00 */
- 0xf7, 0x0f, 0x0a, 0x00, 0x00
-};
-static const __u8 reg84_sn9c325[] = {
- 0x14, 0x00, 0x27, 0x00, 0x07, 0x00, 0xe4, 0x0f,
- 0xd3, 0x0f, 0x4b, 0x00, 0x48, 0x00, 0xc0, 0x0f,
- 0xf8, 0x0f, 0x00, 0x00, 0x00
+ 0xf7, 0x0f, 0x00, 0x00, 0x00
};
-
static const __u8 hv7131r_sensor_init[][8] = {
{0xC1, 0x11, 0x01, 0x08, 0x01, 0x00, 0x00, 0x10},
{0xB1, 0x11, 0x34, 0x17, 0x7F, 0x00, 0x00, 0x10},
{0xa1, 0x21, 0x11, 0x38, 0x00, 0x00, 0x00, 0x10},
{}
};
+static __u8 om6802_sensor_init[][8] = {
+ {0xa0, 0x34, 0x90, 0x05, 0x00, 0x00, 0x00, 0x10},
+ {0xa0, 0x34, 0x49, 0x85, 0x00, 0x00, 0x00, 0x10},
+ {0xa0, 0x34, 0x5a, 0xc0, 0x00, 0x00, 0x00, 0x10},
+ {0xa0, 0x34, 0xdd, 0x18, 0x00, 0x00, 0x00, 0x10},
+/* {0xa0, 0x34, 0xfb, 0x11, 0x00, 0x00, 0x00, 0x10}, */
+ {0xa0, 0x34, 0xf0, 0x04, 0x00, 0x00, 0x00, 0x10},
+ /* white balance & auto-exposure */
+/* {0xa0, 0x34, 0xf1, 0x02, 0x00, 0x00, 0x00, 0x10},
+ * set color mode */
+/* {0xa0, 0x34, 0xfe, 0x5b, 0x00, 0x00, 0x00, 0x10},
+ * max AGC value in AE */
+/* {0xa0, 0x34, 0xe5, 0x00, 0x00, 0x00, 0x00, 0x10},
+ * preset AGC */
+/* {0xa0, 0x34, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x10},
+ * preset brightness */
+/* {0xa0, 0x34, 0xe7, 0x00, 0x00, 0x00, 0x00, 0x10},
+ * preset contrast */
+/* {0xa0, 0x34, 0xe8, 0x31, 0x00, 0x00, 0x00, 0x10},
+ * preset gamma */
+ {0xa0, 0x34, 0xe9, 0x0f, 0x00, 0x00, 0x00, 0x10},
+ /* luminance mode (0x4f = AE) */
+ {0xa0, 0x34, 0xe4, 0xff, 0x00, 0x00, 0x00, 0x10},
+ /* preset shutter */
+/* {0xa0, 0x34, 0xef, 0x00, 0x00, 0x00, 0x00, 0x10},
+ * auto frame rate */
+/* {0xa0, 0x34, 0xfb, 0xee, 0x00, 0x00, 0x00, 0x10}, */
+
+/* {0xa0, 0x34, 0x71, 0x84, 0x00, 0x00, 0x00, 0x10}, */
+/* {0xa0, 0x34, 0x72, 0x05, 0x00, 0x00, 0x00, 0x10}, */
+/* {0xa0, 0x34, 0x68, 0x80, 0x00, 0x00, 0x00, 0x10}, */
+/* {0xa0, 0x34, 0x69, 0x01, 0x00, 0x00, 0x00, 0x10}, */
+ {}
+};
+static const __u8 ov7630_sensor_init[][8] = {
+ {0xa1, 0x21, 0x76, 0x01, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x21, 0x12, 0xc8, 0x00, 0x00, 0x00, 0x10},
+/* win: delay 20ms */
+ {0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x21, 0x12, 0xc8, 0x00, 0x00, 0x00, 0x10},
+/* win: delay 20ms */
+ {0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
+/* win: i2c_r from 00 to 80 */
+ {0xd1, 0x21, 0x03, 0x80, 0x10, 0x20, 0x80, 0x10},
+ {0xb1, 0x21, 0x0c, 0x20, 0x20, 0x00, 0x00, 0x10},
+ {0xd1, 0x21, 0x11, 0x00, 0x48, 0xc0, 0x00, 0x10},
+ {0xb1, 0x21, 0x15, 0x80, 0x03, 0x00, 0x00, 0x10},
+ {0xd1, 0x21, 0x17, 0x1b, 0xbd, 0x05, 0xf6, 0x10},
+ {0xa1, 0x21, 0x1b, 0x04, 0x00, 0x00, 0x00, 0x10},
+ {0xd1, 0x21, 0x1f, 0x00, 0x80, 0x80, 0x80, 0x10},
+ {0xd1, 0x21, 0x23, 0xde, 0x10, 0x8a, 0xa0, 0x10},
+ {0xc1, 0x21, 0x27, 0xca, 0xa2, 0x74, 0x00, 0x10},
+ {0xd1, 0x21, 0x2a, 0x88, 0x00, 0x88, 0x01, 0x10},
+ {0xc1, 0x21, 0x2e, 0x80, 0x00, 0x18, 0x00, 0x10},
+ {0xa1, 0x21, 0x21, 0x08, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x21, 0x22, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x21, 0x2e, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xb1, 0x21, 0x32, 0xc2, 0x08, 0x00, 0x00, 0x10},
+ {0xb1, 0x21, 0x4c, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xd1, 0x21, 0x60, 0x05, 0x40, 0x12, 0x57, 0x10},
+ {0xa1, 0x21, 0x64, 0x73, 0x00, 0x00, 0x00, 0x10},
+ {0xd1, 0x21, 0x65, 0x00, 0x55, 0x01, 0xac, 0x10},
+ {0xa1, 0x21, 0x69, 0x38, 0x00, 0x00, 0x00, 0x10},
+ {0xd1, 0x21, 0x6f, 0x1f, 0x01, 0x00, 0x10, 0x10},
+ {0xd1, 0x21, 0x73, 0x50, 0x20, 0x02, 0x01, 0x10},
+ {0xd1, 0x21, 0x77, 0xf3, 0x90, 0x98, 0x98, 0x10},
+ {0xc1, 0x21, 0x7b, 0x00, 0x4c, 0xf7, 0x00, 0x10},
+ {0xd1, 0x21, 0x17, 0x1b, 0xbd, 0x05, 0xf6, 0x10},
+ {0xa1, 0x21, 0x1b, 0x04, 0x00, 0x00, 0x00, 0x10},
+/* */
+ {0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
+/*fixme: + 0x12, 0x04*/
+ {0xa1, 0x21, 0x75, 0x82, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x21, 0x10, 0x32, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xb1, 0x21, 0x01, 0x80, 0x80, 0x00, 0x00, 0x10},
+/* */
+ {0xa1, 0x21, 0x11, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x21, 0x2a, 0x88, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10},
+/* */
+ {0xa1, 0x21, 0x10, 0x83, 0x00, 0x00, 0x00, 0x10},
+/* {0xb1, 0x21, 0x01, 0x88, 0x70, 0x00, 0x00, 0x10}, */
+ {}
+};
static const __u8 ov7660_sensor_init[][8] = {
{0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, /* reset SCCB */
/* (delay 20ms) */
0x29, 0x29, 0x29, 0x29
};
-/* read <len> bytes (len < sizeof gspca_dev->usb_buf) to gspca_dev->usb_buf */
+/* read <len> bytes to gspca_dev->usb_buf */
static void reg_r(struct gspca_dev *gspca_dev,
__u16 value, int len)
{
+#ifdef GSPCA_DEBUG
+ if (len > USB_BUF_SZ) {
+ err("reg_r: buffer overflow");
+ return;
+ }
+#endif
usb_control_msg(gspca_dev->dev,
usb_rcvctrlpipe(gspca_dev->dev, 0),
0,
{
PDEBUG(D_USBO, "reg_w [%02x] = %02x %02x ..",
value, buffer[0], buffer[1]);
- if (len <= sizeof gspca_dev->usb_buf) {
- memcpy(gspca_dev->usb_buf, buffer, len);
- usb_control_msg(gspca_dev->dev,
- usb_sndctrlpipe(gspca_dev->dev, 0),
- 0x08,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
- value, 0,
- gspca_dev->usb_buf, len,
- 500);
- } else {
- __u8 *tmpbuf;
-
- tmpbuf = kmalloc(len, GFP_KERNEL);
- memcpy(tmpbuf, buffer, len);
- usb_control_msg(gspca_dev->dev,
- usb_sndctrlpipe(gspca_dev->dev, 0),
- 0x08,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
- value, 0,
- tmpbuf, len,
- 500);
- kfree(tmpbuf);
+#ifdef GSPCA_DEBUG
+ if (len > USB_BUF_SZ) {
+ err("reg_w: buffer overflow");
+ return;
}
+#endif
+ memcpy(gspca_dev->usb_buf, buffer, len);
+ usb_control_msg(gspca_dev->dev,
+ usb_sndctrlpipe(gspca_dev->dev, 0),
+ 0x08,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+ value, 0,
+ gspca_dev->usb_buf, len,
+ 500);
}
/* I2C write 1 byte */
static const __u8 regd4[] = {0x60, 0x00, 0x00};
reg_w1(gspca_dev, 0xf1, 0x00);
- reg_w1(gspca_dev, 0x01, 0x00); /*jfm was sn9c1xx[1] in v1*/
+ reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
/* configure gpio */
reg_w(gspca_dev, 0x01, &sn9c1xx[1], 2);
reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f);
- switch (sd->bridge) {
- case BRIDGE_SN9C325:
+ switch (sd->sensor) {
+ case SENSOR_OM6802:
+ reg_w1(gspca_dev, 0x02, 0x71);
+ reg_w1(gspca_dev, 0x01, 0x42);
+ reg_w1(gspca_dev, 0x17, 0x64);
+ reg_w1(gspca_dev, 0x01, 0x42);
+ break;
+/*jfm: from win trace */
+ case SENSOR_OV7630:
+ reg_w1(gspca_dev, 0x01, 0x61);
+ reg_w1(gspca_dev, 0x17, 0xe2);
+ reg_w1(gspca_dev, 0x01, 0x60);
+ reg_w1(gspca_dev, 0x01, 0x40);
+ break;
+ case SENSOR_OV7648:
reg_w1(gspca_dev, 0x01, 0x43);
reg_w1(gspca_dev, 0x17, 0xae);
reg_w1(gspca_dev, 0x01, 0x42);
break;
+/*jfm: from win trace */
+ case SENSOR_OV7660:
+ reg_w1(gspca_dev, 0x01, 0x61);
+ reg_w1(gspca_dev, 0x17, 0x20);
+ reg_w1(gspca_dev, 0x01, 0x60);
+ reg_w1(gspca_dev, 0x01, 0x40);
+ break;
default:
reg_w1(gspca_dev, 0x01, 0x43);
reg_w1(gspca_dev, 0x17, 0x61);
reg_w1(gspca_dev, 0x01, 0x42);
- }
-
- if (sd->sensor == SENSOR_HV7131R) {
- if (probesensor(gspca_dev) < 0)
- return -ENODEV;
+ if (sd->sensor == SENSOR_HV7131R) {
+ if (probesensor(gspca_dev) < 0)
+ return -ENODEV;
+ }
+ break;
}
return 0;
}
}
}
+static void om6802_InitSensor(struct gspca_dev *gspca_dev)
+{
+ int i = 0;
+
+ while (om6802_sensor_init[i][0]) {
+ i2c_w8(gspca_dev, om6802_sensor_init[i]);
+ i++;
+ }
+}
+
+static void ov7630_InitSensor(struct gspca_dev *gspca_dev)
+{
+ int i = 0;
+
+ i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 76 01 */
+ i++;
+ i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 12 c8 (RGB+SRST) */
+ i++;
+ msleep(20);
+ i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 12 48 */
+ i++;
+ i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 12 c8 */
+ i++;
+ msleep(20);
+ i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 12 48 */
+ i++;
+/*jfm:win i2c_r from 00 to 80*/
+
+ while (ov7630_sensor_init[i][0]) {
+ i2c_w8(gspca_dev, ov7630_sensor_init[i]);
+ i++;
+ }
+}
+
static void ov7648_InitSensor(struct gspca_dev *gspca_dev)
{
int i = 0;
sd->autogain = AUTOGAIN_DEF;
sd->ag_cnt = -1;
+ switch (sd->sensor) {
+ case SENSOR_OV7630:
+ case SENSOR_OV7648:
+ case SENSOR_OV7660:
+ gspca_dev->ctrl_dis = (1 << AUTOGAIN_IDX);
+ break;
+ }
+
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
/* const __u8 *sn9c1xx; */
| ((expoMo10[3] & 0x30) >> 4));
break;
}
+ case SENSOR_OM6802: {
+ __u8 gainOm[] =
+ { 0xa0, 0x34, 0xe5, 0x00, 0x00, 0x00, 0x00, 0x10 };
+
+ if (expo > 0x03ff)
+ expo = 0x03ff;
+ if (expo < 0x0001)
+ expo = 0x0001;
+ gainOm[3] = expo >> 2;
+ i2c_w8(gspca_dev, gainOm);
+ reg_w1(gspca_dev, 0x96, (expo >> 5) & 0x1f);
+ PDEBUG(D_CONF, "set exposure %d", gainOm[3]);
+ break;
+ }
}
return expo;
}
+/* this function is used for sensors o76xx only */
+static void setbrightcont(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ unsigned val;
+ __u8 reg84_full[0x15];
+
+ memset(reg84_full, 0, sizeof reg84_full);
+ val = sd->contrast * 0x20 / CONTRAST_MAX + 0x10; /* 10..30 */
+ reg84_full[2] = val;
+ reg84_full[0] = (val + 1) / 2;
+ reg84_full[4] = (val + 1) / 5;
+ if (val > BRIGHTNESS_DEF)
+ val = (sd->brightness - BRIGHTNESS_DEF) * 0x20
+ / BRIGHTNESS_MAX;
+ else
+ val = 0;
+ reg84_full[0x12] = val; /* 00..1f */
+ reg_w(gspca_dev, 0x84, reg84_full, sizeof reg84_full);
+}
+
+/* sensor != ov76xx */
static void setbrightness(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
unsigned int expo;
__u8 k2;
+ k2 = sd->brightness >> 10;
switch (sd->sensor) {
case SENSOR_HV7131R:
expo = sd->brightness << 4;
expo = sd->brightness >> 4;
sd->exposure = setexposure(gspca_dev, expo);
break;
+ case SENSOR_OM6802:
+ expo = sd->brightness >> 6;
+ sd->exposure = setexposure(gspca_dev, expo);
+ k2 = sd->brightness >> 11;
+ break;
}
- k2 = sd->brightness >> 10;
reg_w1(gspca_dev, 0x96, k2);
}
+/* sensor != ov76xx */
static void setcontrast(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
static void setcolors(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- __u8 data;
- int colour;
+ __u8 blue, red;
- colour = sd->colors - 128;
- if (colour > 0)
- data = (colour + 32) & 0x7f; /* blue */
- else
- data = (-colour + 32) & 0x7f; /* red */
- reg_w1(gspca_dev, 0x05, data);
+ if (sd->colors >= 32) {
+ red = 32 + (sd->colors - 32) / 2;
+ blue = 64 - sd->colors;
+ } else {
+ red = sd->colors;
+ blue = 32 + (32 - sd->colors) / 2;
+ }
+ reg_w1(gspca_dev, 0x05, red);
+/* reg_w1(gspca_dev, 0x07, 32); */
+ reg_w1(gspca_dev, 0x06, blue);
}
static void setautogain(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- switch (sd->sensor) {
- case SENSOR_HV7131R:
- case SENSOR_MO4000:
- case SENSOR_MI0360:
- if (sd->autogain)
- sd->ag_cnt = AG_CNT_START;
- else
- sd->ag_cnt = -1;
- break;
- }
+ if (gspca_dev->ctrl_dis & (1 << AUTOGAIN_IDX))
+ return;
+ if (sd->autogain)
+ sd->ag_cnt = AG_CNT_START;
+ else
+ sd->ag_cnt = -1;
}
/* -- start the camera -- */
static const __u8 C0[] = { 0x2d, 0x2d, 0x3a, 0x05, 0x04, 0x3f };
static const __u8 CA[] = { 0x28, 0xd8, 0x14, 0xec };
static const __u8 CE[] = { 0x32, 0xdd, 0x2d, 0xdd }; /* MI0360 */
- static const __u8 CE_sn9c325[] =
- { 0x32, 0xdd, 0x32, 0xdd }; /* OV7648 - SN9C325 */
+ static const __u8 CE_ov76xx[] =
+ { 0x32, 0xdd, 0x32, 0xdd }; /* OV7630/48 */
sn9c1xx = sn_tb[(int) sd->sensor];
configure_gpio(gspca_dev, sn9c1xx);
-/* reg_w1(gspca_dev, 0x01, 0x44); jfm from win trace*/
reg_w1(gspca_dev, 0x15, sn9c1xx[0x15]);
reg_w1(gspca_dev, 0x16, sn9c1xx[0x16]);
reg_w1(gspca_dev, 0x12, sn9c1xx[0x12]);
reg_w1(gspca_dev, 0xc8, 0x50);
reg_w1(gspca_dev, 0xc9, 0x3c);
reg_w1(gspca_dev, 0x18, sn9c1xx[0x18]);
- switch (sd->bridge) {
- case BRIDGE_SN9C325:
+ switch (sd->sensor) {
+ case SENSOR_OV7630:
+ reg17 = 0xe2;
+ break;
+ case SENSOR_OV7648:
reg17 = 0xae;
break;
+/*jfm: from win trace */
+ case SENSOR_OV7660:
+ reg17 = 0xa0;
+ break;
default:
reg17 = 0x60;
break;
reg_w1(gspca_dev, 0x07, sn9c1xx[7]);
reg_w1(gspca_dev, 0x06, sn9c1xx[6]);
reg_w1(gspca_dev, 0x14, sn9c1xx[0x14]);
- switch (sd->bridge) {
- case BRIDGE_SN9C325:
- reg_w(gspca_dev, 0x20, regsn20_sn9c325,
- sizeof regsn20_sn9c325);
- for (i = 0; i < 8; i++)
- reg_w(gspca_dev, 0x84, reg84_sn9c325,
- sizeof reg84_sn9c325);
- reg_w1(gspca_dev, 0x9a, 0x0a);
- reg_w1(gspca_dev, 0x99, 0x60);
- break;
- default:
- reg_w(gspca_dev, 0x20, regsn20, sizeof regsn20);
- for (i = 0; i < 8; i++)
- reg_w(gspca_dev, 0x84, reg84, sizeof reg84);
+ reg_w(gspca_dev, 0x20, gamma_def, sizeof gamma_def);
+ for (i = 0; i < 8; i++)
+ reg_w(gspca_dev, 0x84, reg84, sizeof reg84);
reg_w1(gspca_dev, 0x9a, 0x08);
reg_w1(gspca_dev, 0x99, 0x59);
- break;
- }
mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
if (mode)
/* reg1 = 0x06; * 640 clk 24Mz (done) */
}
break;
+ case SENSOR_OM6802:
+ om6802_InitSensor(gspca_dev);
+ reg17 = 0x64; /* 640 MCKSIZE */
+ break;
+ case SENSOR_OV7630:
+ ov7630_InitSensor(gspca_dev);
+ reg17 = 0xe2;
+ reg1 = 0x44;
+ break;
case SENSOR_OV7648:
ov7648_InitSensor(gspca_dev);
reg17 = 0xa2;
}
reg_w(gspca_dev, 0xc0, C0, 6);
reg_w(gspca_dev, 0xca, CA, 4);
- switch (sd->bridge) {
- case BRIDGE_SN9C325:
- reg_w(gspca_dev, 0xce, CE_sn9c325, 4);
+ switch (sd->sensor) {
+ case SENSOR_OV7630:
+ case SENSOR_OV7648:
+ reg_w(gspca_dev, 0xce, CE_ov76xx, 4);
break;
default:
reg_w(gspca_dev, 0xce, CE, 4);
reg_w1(gspca_dev, 0x18, reg18);
reg_w1(gspca_dev, 0x17, reg17);
- reg_w1(gspca_dev, 0x01, reg1);
- setbrightness(gspca_dev);
- setcontrast(gspca_dev);
+ switch (sd->sensor) {
+ case SENSOR_HV7131R:
+ case SENSOR_MI0360:
+ case SENSOR_MO4000:
+ case SENSOR_OM6802:
+ setbrightness(gspca_dev);
+ setcontrast(gspca_dev);
+ break;
+ default: /* OV76xx */
+ setbrightcont(gspca_dev);
+ break;
+ }
setautogain(gspca_dev);
+ reg_w1(gspca_dev, 0x01, reg1);
}
static void sd_stopN(struct gspca_dev *gspca_dev)
i2c_w8(gspca_dev, stopmi0360);
data = 0x29;
break;
+ case SENSOR_OV7630:
case SENSOR_OV7648:
data = 0x29;
break;
reg_w1(gspca_dev, 0x17, sn9c1xx[0x17]);
reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
reg_w1(gspca_dev, 0x01, data);
- reg_w1(gspca_dev, 0xf1, 0x01);
-}
-
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
+ reg_w1(gspca_dev, 0xf1, 0x00);
}
static void do_autogain(struct gspca_dev *gspca_dev)
default:
/* case SENSOR_MO4000: */
/* case SENSOR_MI0360: */
+/* case SENSOR_OM6802: */
expotimes = sd->exposure;
expotimes += (luma_mean - delta) >> 6;
if (expotimes < 0)
gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
}
-static unsigned int getexposure(struct gspca_dev *gspca_dev)
-{
- struct sd *sd = (struct sd *) gspca_dev;
- __u8 hexpo, mexpo, lexpo;
-
- switch (sd->sensor) {
- case SENSOR_HV7131R:
- /* read sensor exposure */
- i2c_r5(gspca_dev, 0x25);
- return (gspca_dev->usb_buf[0] << 16)
- | (gspca_dev->usb_buf[1] << 8)
- | gspca_dev->usb_buf[2];
- case SENSOR_MI0360:
- /* read sensor exposure */
- i2c_r5(gspca_dev, 0x09);
- return (gspca_dev->usb_buf[0] << 8)
- | gspca_dev->usb_buf[1];
- case SENSOR_MO4000:
- i2c_r5(gspca_dev, 0x0e);
- hexpo = 0; /* gspca_dev->usb_buf[1] & 0x07; */
- mexpo = 0x40; /* gspca_dev->usb_buf[2] & 0xff; */
- lexpo = (gspca_dev->usb_buf[1] & 0x30) >> 4;
- PDEBUG(D_CONF, "exposure %d",
- (hexpo << 10) | (mexpo << 2) | lexpo);
- return (hexpo << 10) | (mexpo << 2) | lexpo;
- default:
-/* case SENSOR_OV7648: * jfm: is it ok for 7648? */
-/* case SENSOR_OV7660: */
- /* read sensor exposure */
- i2c_r5(gspca_dev, 0x04);
- hexpo = gspca_dev->usb_buf[3] & 0x2f;
- lexpo = gspca_dev->usb_buf[0] & 0x02;
- i2c_r5(gspca_dev, 0x08);
- mexpo = gspca_dev->usb_buf[2];
- return (hexpo << 10) | (mexpo << 2) | lexpo;
- }
-}
-
-static void getbrightness(struct gspca_dev *gspca_dev)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- /* hardcoded registers seem not readable */
- switch (sd->sensor) {
- case SENSOR_HV7131R:
- sd->brightness = getexposure(gspca_dev) >> 4;
- break;
- case SENSOR_MI0360:
- sd->brightness = getexposure(gspca_dev) << 4;
- break;
- case SENSOR_MO4000:
- sd->brightness = getexposure(gspca_dev) << 4;
- break;
- }
-}
-
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
sd->brightness = val;
- if (gspca_dev->streaming)
- setbrightness(gspca_dev);
+ if (gspca_dev->streaming) {
+ switch (sd->sensor) {
+ case SENSOR_HV7131R:
+ case SENSOR_MI0360:
+ case SENSOR_MO4000:
+ case SENSOR_OM6802:
+ setbrightness(gspca_dev);
+ break;
+ default: /* OV76xx */
+ setbrightcont(gspca_dev);
+ break;
+ }
+ }
return 0;
}
{
struct sd *sd = (struct sd *) gspca_dev;
- getbrightness(gspca_dev);
*val = sd->brightness;
return 0;
}
struct sd *sd = (struct sd *) gspca_dev;
sd->contrast = val;
- if (gspca_dev->streaming)
- setcontrast(gspca_dev);
+ if (gspca_dev->streaming) {
+ switch (sd->sensor) {
+ case SENSOR_HV7131R:
+ case SENSOR_MI0360:
+ case SENSOR_MO4000:
+ case SENSOR_OM6802:
+ setcontrast(gspca_dev);
+ break;
+ default: /* OV76xx */
+ setbrightcont(gspca_dev);
+ break;
+ }
+ }
return 0;
}
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
.dq_callback = do_autogain,
};
| (SENSOR_ ## sensor << 8) \
| (i2c_addr)
static const __devinitdata struct usb_device_id device_table[] = {
-#ifndef CONFIG_USB_SN9C102
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
{USB_DEVICE(0x0458, 0x7025), BSI(SN9C120, MI0360, 0x5d)},
{USB_DEVICE(0x045e, 0x00f5), BSI(SN9C105, OV7660, 0x21)},
{USB_DEVICE(0x045e, 0x00f7), BSI(SN9C105, OV7660, 0x21)},
/* {USB_DEVICE(0x0c45, 0x6108), BSI(SN9C120, OM6801, 0x??)}, */
/* {USB_DEVICE(0x0c45, 0x6122), BSI(SN9C110, ICM105C, 0x??)}, */
/* {USB_DEVICE(0x0c45, 0x6123), BSI(SN9C110, SanyoCCD, 0x??)}, */
- {USB_DEVICE(0x0c45, 0x612a), BSI(SN9C325, OV7648, 0x21)},
-/* bw600.inf:
- {USB_DEVICE(0x0c45, 0x612a), BSI(SN9C110, OV7648, 0x21)}, */
+ {USB_DEVICE(0x0c45, 0x6128), BSI(SN9C110, OM6802, 0x21)}, /*sn9c325?*/
+/*bw600.inf:*/
+ {USB_DEVICE(0x0c45, 0x612a), BSI(SN9C110, OV7648, 0x21)}, /*sn9c325?*/
{USB_DEVICE(0x0c45, 0x612c), BSI(SN9C110, MO4000, 0x21)},
-/* {USB_DEVICE(0x0c45, 0x612e), BSI(SN9C110, OV7630, 0x??)}, */
+ {USB_DEVICE(0x0c45, 0x612e), BSI(SN9C110, OV7630, 0x21)},
/* {USB_DEVICE(0x0c45, 0x612f), BSI(SN9C110, ICM105C, 0x??)}, */
-#ifndef CONFIG_USB_SN9C102
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
{USB_DEVICE(0x0c45, 0x6130), BSI(SN9C120, MI0360, 0x5d)},
+#endif
{USB_DEVICE(0x0c45, 0x6138), BSI(SN9C120, MO4000, 0x21)},
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
/* {USB_DEVICE(0x0c45, 0x613a), BSI(SN9C120, OV7648, 0x??)}, */
{USB_DEVICE(0x0c45, 0x613b), BSI(SN9C120, OV7660, 0x21)},
{USB_DEVICE(0x0c45, 0x613c), BSI(SN9C120, HV7131R, 0x11)},
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
gspca_dev->usb_buf[0]);
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
return -EINVAL;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
}
static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
{
reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x05, 0x00);
}
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
.stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
int ret;
}
static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
{
/* This maybe reset or power control */
reg_write(gspca_dev->dev, 0x03, 0x03, 0x20);
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
.stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
struct usb_device *dev = gspca_dev->dev;
reg_w(dev, 0x03, 0x00, 0x0003);
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
return 0; /* success */
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
/* write_vector(gspca_dev, spca508_open_data); */
return 0;
reg_write(gspca_dev->dev, 0x8112, 0x20);
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
struct sd {
struct gspca_dev gspca_dev; /* !! must be the first item */
- unsigned short contrast;
- __u8 brightness;
+ __u16 contrast; /* rev72a only */
+#define CONTRAST_MIN 0x0000
+#define CONTRAST_DEF 0x2000
+#define CONTRAST_MAX 0x3fff
+
+ __u16 exposure; /* rev12a only */
+#define EXPOSURE_MIN 1
+#define EXPOSURE_DEF 200
+#define EXPOSURE_MAX (4095 - 900) /* see set_exposure */
+
+ __u8 brightness; /* rev72a only */
+#define BRIGHTNESS_MIN 0
+#define BRIGHTNESS_DEF 32
+#define BRIGHTNESS_MAX 63
+
+ __u8 white; /* rev12a only */
+#define WHITE_MIN 1
+#define WHITE_DEF 0x40
+#define WHITE_MAX 0x7f
+
__u8 autogain;
+#define AUTOGAIN_MIN 0
+#define AUTOGAIN_DEF 1
+#define AUTOGAIN_MAX 1
+
+ __u8 gain; /* rev12a only */
+#define GAIN_MIN 0x0
+#define GAIN_DEF 0x24
+#define GAIN_MAX 0x24
+
+#define EXPO12A_DEF 3
+ __u8 expo12a; /* expo/gain? for rev 12a */
__u8 chip_revision;
+#define Rev012A 0
+#define Rev072A 1
+
signed char ag_cnt;
#define AG_CNT_START 13
};
-/* V4L2 controls supported by the driver */
-static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
-
-static struct ctrl sd_ctrls[] = {
-#define SD_BRIGHTNESS 0
- {
- {
- .id = V4L2_CID_BRIGHTNESS,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Brightness",
- .minimum = 0,
- .maximum = 63,
- .step = 1,
- .default_value = 32,
- },
- .set = sd_setbrightness,
- .get = sd_getbrightness,
- },
-#define SD_CONTRAST 1
- {
- {
- .id = V4L2_CID_CONTRAST,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Contrast",
- .minimum = 0,
- .maximum = 0x3fff,
- .step = 1,
- .default_value = 0x2000,
- },
- .set = sd_setcontrast,
- .get = sd_getcontrast,
- },
-#define SD_AUTOGAIN 2
- {
- {
- .id = V4L2_CID_AUTOGAIN,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Auto Gain",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- },
- .set = sd_setautogain,
- .get = sd_getautogain,
- },
-};
-
-static struct v4l2_pix_format sif_mode[] = {
+static struct v4l2_pix_format sif_012a_mode[] = {
{160, 120, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
.bytesperline = 160,
.sizeimage = 160 * 120,
.priv = 0},
};
+static struct v4l2_pix_format sif_072a_mode[] = {
+ {160, 120, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+ .bytesperline = 160,
+ .sizeimage = 160 * 120,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 3},
+ {176, 144, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+ .bytesperline = 176,
+ .sizeimage = 176 * 144,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 2},
+ {320, 240, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 240,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1},
+ {352, 288, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+ .bytesperline = 352,
+ .sizeimage = 352 * 288,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0},
+};
+
/*
* Initialization data
* I'm not very sure how to split initialization from open data
#define SPCA561_INDEX_I2C_BASE 0x8800
#define SPCA561_SNAPBIT 0x20
#define SPCA561_SNAPCTRL 0x40
-enum {
- Rev072A = 0,
- Rev012A,
-};
-static void reg_w_val(struct usb_device *dev, __u16 index, __u16 value)
+static void reg_w_val(struct usb_device *dev, __u16 index, __u8 value)
{
int ret;
index, gspca_dev->usb_buf, len, 500);
}
-static void i2c_init(struct gspca_dev *gspca_dev, __u8 mode)
-{
- reg_w_val(gspca_dev->dev, 0x92, 0x8804);
- reg_w_val(gspca_dev->dev, mode, 0x8802);
-}
-
static void i2c_write(struct gspca_dev *gspca_dev, __u16 valeur, __u16 reg)
{
int retry = 60;
DataLow = valeur;
DataHight = valeur >> 8;
- reg_w_val(gspca_dev->dev, reg, 0x8801);
- reg_w_val(gspca_dev->dev, DataLow, 0x8805);
- reg_w_val(gspca_dev->dev, DataHight, 0x8800);
+ reg_w_val(gspca_dev->dev, 0x8801, reg);
+ reg_w_val(gspca_dev->dev, 0x8805, DataLow);
+ reg_w_val(gspca_dev->dev, 0x8800, DataHight);
while (retry--) {
reg_r(gspca_dev, 0x8803, 1);
if (!gspca_dev->usb_buf[0])
__u8 value;
__u8 vallsb;
- reg_w_val(gspca_dev->dev, 0x92, 0x8804);
- reg_w_val(gspca_dev->dev, reg, 0x8801);
- reg_w_val(gspca_dev->dev, (mode | 0x01), 0x8802);
- while (retry--) {
+ reg_w_val(gspca_dev->dev, 0x8804, 0x92);
+ reg_w_val(gspca_dev->dev, 0x8801, reg);
+ reg_w_val(gspca_dev->dev, 0x8802, (mode | 0x01));
+ do {
reg_r(gspca_dev, 0x8803, 1);
if (!gspca_dev->usb_buf)
break;
- }
+ } while (--retry);
if (retry == 0)
return -1;
reg_r(gspca_dev, 0x8800, 1);
{0x0035, 0x8801}, /* 0x14 - set gain general */
{0x001f, 0x8805}, /* 0x14 */
{0x0000, 0x8800},
- {0x0030, 0x8112},
+ {0x000e, 0x8112}, /* white balance - was 30 */
{}
};
-static void sensor_reset(struct gspca_dev *gspca_dev)
-{
- reg_w_val(gspca_dev->dev, 0x8631, 0xc8);
- reg_w_val(gspca_dev->dev, 0x8634, 0xc8);
- reg_w_val(gspca_dev->dev, 0x8112, 0x00);
- reg_w_val(gspca_dev->dev, 0x8114, 0x00);
- reg_w_val(gspca_dev->dev, 0x8118, 0x21);
- i2c_init(gspca_dev, 0x14);
- i2c_write(gspca_dev, 1, 0x0d);
- i2c_write(gspca_dev, 0, 0x0d);
-}
/******************** QC Express etch2 stuff ********************/
static const __u16 Pb100_1map8300[][2] = {
{0x8303, 0x0125}, /* image area */
{0x8304, 0x0169},
{0x8328, 0x000b},
- {0x833c, 0x0001},
+ {0x833c, 0x0001}, /*fixme: win:07*/
- {0x832f, 0x0419},
+ {0x832f, 0x1904}, /*fixme: was 0419*/
{0x8307, 0x00aa},
{0x8301, 0x0003},
{0x8302, 0x000e},
};
static const __u16 spca561_161rev12A_data1[][2] = {
- {0x21, 0x8118},
- {0x01, 0x8114},
- {0x00, 0x8112},
+ {0x29, 0x8118}, /* white balance - was 21 */
+ {0x08, 0x8114}, /* white balance - was 01 */
+ {0x0e, 0x8112}, /* white balance - was 00 */
+ {0x00, 0x8102}, /* white balance - new */
{0x92, 0x8804},
{0x04, 0x8802}, /* windows uses 08 */
{}
{0xb0, 0x8603},
/* sensor gains */
+ {0x07, 0x8601}, /* white balance - new */
+ {0x07, 0x8602}, /* white balance - new */
{0x00, 0x8610}, /* *red */
{0x00, 0x8611}, /* 3f *green */
{0x00, 0x8612}, /* green *blue */
{0x00, 0x8613}, /* blue *green */
- {0x35, 0x8614}, /* green *red */
- {0x35, 0x8615}, /* 40 *green */
- {0x35, 0x8616}, /* 7a *blue */
- {0x35, 0x8617}, /* 40 *green */
+ {0x43, 0x8614}, /* green *red - white balance - was 0x35 */
+ {0x40, 0x8615}, /* 40 *green - white balance - was 0x35 */
+ {0x71, 0x8616}, /* 7a *blue - white balance - was 0x35 */
+ {0x40, 0x8617}, /* 40 *green - white balance - was 0x35 */
{0x0c, 0x8620}, /* 0c */
{0xc8, 0x8631}, /* c8 */
{0xdf, 0x863c}, /* df */
{0xf0, 0x8505},
{0x32, 0x850a},
+/* {0x99, 0x8700}, * - white balance - new (removed) */
{}
};
}
static void init_161rev12A(struct gspca_dev *gspca_dev)
{
- sensor_reset(gspca_dev);
+/* sensor_reset(gspca_dev); (not in win) */
write_vector(gspca_dev, spca561_161rev12A_data1);
sensor_mapwrite(gspca_dev, Pb100_1map8300);
+/*fixme: should be in sd_start*/
write_vector(gspca_dev, spca561_161rev12A_data2);
sensor_mapwrite(gspca_dev, Pb100_2map8300);
}
}
cam = &gspca_dev->cam;
- cam->dev_name = (char *) id->driver_info;
cam->epaddr = 0x01;
gspca_dev->nbalt = 7 + 1; /* choose alternate 7 first */
- cam->cam_mode = sif_mode;
- cam->nmodes = sizeof sif_mode / sizeof sif_mode[0];
sd->chip_revision = id->driver_info;
- sd->brightness = sd_ctrls[SD_BRIGHTNESS].qctrl.default_value;
- sd->contrast = sd_ctrls[SD_CONTRAST].qctrl.default_value;
- sd->autogain = sd_ctrls[SD_AUTOGAIN].qctrl.default_value;
+ if (sd->chip_revision == Rev012A) {
+ cam->cam_mode = sif_012a_mode;
+ cam->nmodes = ARRAY_SIZE(sif_012a_mode);
+ } else {
+ cam->cam_mode = sif_072a_mode;
+ cam->nmodes = ARRAY_SIZE(sif_072a_mode);
+ }
+ sd->brightness = BRIGHTNESS_DEF;
+ sd->contrast = CONTRAST_DEF;
+ sd->white = WHITE_DEF;
+ sd->exposure = EXPOSURE_DEF;
+ sd->autogain = AUTOGAIN_DEF;
+ sd->gain = GAIN_DEF;
+ sd->expo12a = EXPO12A_DEF;
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init_12a(struct gspca_dev *gspca_dev)
{
- struct sd *sd = (struct sd *) gspca_dev;
-
- switch (sd->chip_revision) {
- case Rev072A:
- PDEBUG(D_STREAM, "Chip revision id: 072a");
- write_vector(gspca_dev, spca561_init_data);
- break;
- default:
-/* case Rev012A: */
- PDEBUG(D_STREAM, "Chip revision id: 012a");
- init_161rev12A(gspca_dev);
- break;
- }
+ PDEBUG(D_STREAM, "Chip revision: 012a");
+ init_161rev12A(gspca_dev);
+ return 0;
+}
+static int sd_init_72a(struct gspca_dev *gspca_dev)
+{
+ PDEBUG(D_STREAM, "Chip revision: 072a");
+ write_vector(gspca_dev, spca561_init_data);
return 0;
}
struct sd *sd = (struct sd *) gspca_dev;
struct usb_device *dev = gspca_dev->dev;
__u8 lowb;
- int expotimes;
switch (sd->chip_revision) {
case Rev072A:
lowb = sd->contrast >> 8;
- reg_w_val(dev, lowb, 0x8651);
- reg_w_val(dev, lowb, 0x8652);
- reg_w_val(dev, lowb, 0x8653);
- reg_w_val(dev, lowb, 0x8654);
+ reg_w_val(dev, 0x8651, lowb);
+ reg_w_val(dev, 0x8652, lowb);
+ reg_w_val(dev, 0x8653, lowb);
+ reg_w_val(dev, 0x8654, lowb);
break;
- case Rev012A: {
- __u8 Reg8391[] =
- { 0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00 };
-
- /* Write camera sensor settings */
- expotimes = (sd->contrast >> 5) & 0x07ff;
- Reg8391[0] = expotimes & 0xff; /* exposure */
- Reg8391[1] = 0x18 | (expotimes >> 8);
- Reg8391[2] = sd->brightness; /* gain */
+ default: {
+/* case Rev012A: { */
+ static const __u8 Reg8391[] =
+ { 0x92, 0x30, 0x20, 0x00, 0x0c, 0x00, 0x00, 0x00 };
+
reg_w_buf(gspca_dev, 0x8391, Reg8391, 8);
reg_w_buf(gspca_dev, 0x8390, Reg8391, 8);
break;
}
}
-static void setautogain(struct gspca_dev *gspca_dev)
+/* rev12a only */
+static void setwhite(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ __u16 white;
+ __u8 reg8614, reg8616;
+
+ white = sd->white;
+ /* try to emulate MS-win as possible */
+ reg8616 = 0x90 - white * 5 / 8;
+ reg_w_val(gspca_dev->dev, 0x8616, reg8616);
+ reg8614 = 0x20 + white * 3 / 8;
+ reg_w_val(gspca_dev->dev, 0x8614, reg8614);
+}
- if (sd->chip_revision == Rev072A) {
- if (sd->autogain)
- sd->ag_cnt = AG_CNT_START;
- else
- sd->ag_cnt = -1;
+/* rev 12a only */
+static void setexposure(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int expo;
+ int clock_divider;
+ __u8 data[2];
+
+ /* Register 0x8309 controls exposure for the spca561,
+ the basic exposure setting goes from 1-2047, where 1 is completely
+ dark and 2047 is very bright. It not only influences exposure but
+ also the framerate (to allow for longer exposure) from 1 - 300 it
+ only raises the exposure time then from 300 - 600 it halves the
+ framerate to be able to further raise the exposure time and for every
+ 300 more it halves the framerate again. This allows for a maximum
+ exposure time of circa 0.2 - 0.25 seconds (30 / (2000/3000) fps).
+ Sometimes this is not enough, the 1-2047 uses bits 0-10, bits 11-12
+ configure a divider for the base framerate which us used at the
+ exposure setting of 1-300. These bits configure the base framerate
+ according to the following formula: fps = 60 / (value + 2) */
+ if (sd->exposure < 2048) {
+ expo = sd->exposure;
+ clock_divider = 0;
+ } else {
+ /* Add 900 to make the 0 setting of the second part of the
+ exposure equal to the 2047 setting of the first part. */
+ expo = (sd->exposure - 2048) + 900;
+ clock_divider = 3;
}
+ expo |= clock_divider << 11;
+ data[0] = expo;
+ data[1] = expo >> 8;
+ reg_w_buf(gspca_dev, 0x8309, data, 2);
}
-static void sd_start(struct gspca_dev *gspca_dev)
+/* rev 12a only */
+static void setgain(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ __u8 data[2];
+
+ data[0] = sd->gain;
+ data[1] = 0;
+ reg_w_buf(gspca_dev, 0x8335, data, 2);
+}
+
+static void setautogain(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->autogain)
+ sd->ag_cnt = AG_CNT_START;
+ else
+ sd->ag_cnt = -1;
+}
+
+static void sd_start_12a(struct gspca_dev *gspca_dev)
+{
struct usb_device *dev = gspca_dev->dev;
- int Clck;
+ int Clck = 0x8a; /* lower 0x8X values lead to fps > 30 */
__u8 Reg8307[] = { 0xaa, 0x00 };
int mode;
mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
- switch (sd->chip_revision) {
- case Rev072A:
- switch (mode) {
- default:
-/* case 0:
- case 1: */
- Clck = 0x25;
- break;
- case 2:
- Clck = 0x22;
- break;
- case 3:
- Clck = 0x21;
- break;
- }
- reg_w_val(dev, 0x8500, mode); /* mode */
- reg_w_val(dev, 0x8700, Clck); /* 0x27 clock */
- reg_w_val(dev, 0x8112, 0x10 | 0x20);
- setautogain(gspca_dev);
- break;
+ if (mode <= 1) {
+ /* Use compression on 320x240 and above */
+ reg_w_val(dev, 0x8500, 0x10 | mode);
+ } else {
+ /* I couldn't get the compression to work below 320x240
+ * Fortunately at these resolutions the bandwidth
+ * is sufficient to push raw frames at ~20fps */
+ reg_w_val(dev, 0x8500, mode);
+ } /* -- qq@kuku.eu.org */
+ reg_w_buf(gspca_dev, 0x8307, Reg8307, 2);
+ reg_w_val(gspca_dev->dev, 0x8700, Clck);
+ /* 0x8f 0x85 0x27 clock */
+ reg_w_val(gspca_dev->dev, 0x8112, 0x1e | 0x20);
+ reg_w_val(gspca_dev->dev, 0x850b, 0x03);
+ setcontrast(gspca_dev);
+ setwhite(gspca_dev);
+ setautogain(gspca_dev);
+ setexposure(gspca_dev);
+}
+static void sd_start_72a(struct gspca_dev *gspca_dev)
+{
+ struct usb_device *dev = gspca_dev->dev;
+ int Clck;
+ int mode;
+
+ mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+ switch (mode) {
default:
-/* case Rev012A: */
- switch (mode) {
- case 0:
- case 1:
- Clck = 0x8a;
- break;
- case 2:
- Clck = 0x85;
- break;
- default:
- Clck = 0x83;
- break;
- }
- if (mode <= 1) {
- /* Use compression on 320x240 and above */
- reg_w_val(dev, 0x8500, 0x10 | mode);
- } else {
- /* I couldn't get the compression to work below 320x240
- * Fortunately at these resolutions the bandwidth
- * is sufficient to push raw frames at ~20fps */
- reg_w_val(dev, 0x8500, mode);
- } /* -- qq@kuku.eu.org */
- reg_w_buf(gspca_dev, 0x8307, Reg8307, 2);
- reg_w_val(gspca_dev->dev, 0x8700, Clck);
- /* 0x8f 0x85 0x27 clock */
- reg_w_val(gspca_dev->dev, 0x8112, 0x1e | 0x20);
- reg_w_val(gspca_dev->dev, 0x850b, 0x03);
- setcontrast(gspca_dev);
+/* case 0:
+ case 1: */
+ Clck = 0x25;
+ break;
+ case 2:
+ Clck = 0x22;
+ break;
+ case 3:
+ Clck = 0x21;
break;
}
+ reg_w_val(dev, 0x8500, mode); /* mode */
+ reg_w_val(dev, 0x8700, Clck); /* 0x27 clock */
+ reg_w_val(dev, 0x8112, 0x10 | 0x20);
+ setautogain(gspca_dev);
}
static void sd_stopN(struct gspca_dev *gspca_dev)
{
- reg_w_val(gspca_dev->dev, 0x8112, 0x20);
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->chip_revision == Rev012A) {
+ reg_w_val(gspca_dev->dev, 0x8112, 0x0e);
+ } else {
+ reg_w_val(gspca_dev->dev, 0x8112, 0x20);
+/* reg_w_val(gspca_dev->dev, 0x8102, 0x00); ?? */
+ }
}
static void sd_stop0(struct gspca_dev *gspca_dev)
{
-}
+ struct sd *sd = (struct sd *) gspca_dev;
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
- reg_w_val(gspca_dev->dev, 0x8114, 0);
+ if (sd->chip_revision == Rev012A) {
+ reg_w_val(gspca_dev->dev, 0x8118, 0x29);
+ reg_w_val(gspca_dev->dev, 0x8114, 0x08);
+ }
+/* reg_w_val(gspca_dev->dev, 0x8114, 0); */
}
static void do_autogain(struct gspca_dev *gspca_dev)
__u8 luma_mean = 110;
__u8 luma_delta = 20;
__u8 spring = 4;
+ __u8 reg8339[2];
if (sd->ag_cnt < 0)
return;
}
break;
case Rev012A:
- /* sensor registers is access and memory mapped to 0x8300 */
- /* readind all 0x83xx block the sensor */
- /*
- * The data from the header seem wrong where is the luma
- * and chroma mean value
- * at the moment set exposure in contrast set
- */
+ reg_r(gspca_dev, 0x8330, 2);
+ if (gspca_dev->usb_buf[1] > 0x08) {
+ reg8339[0] = ++sd->expo12a;
+ reg8339[1] = 0;
+ reg_w_buf(gspca_dev, 0x8339, reg8339, 2);
+ } else if (gspca_dev->usb_buf[1] < 0x02) {
+ reg8339[0] = --sd->expo12a;
+ reg8339[1] = 0;
+ reg_w_buf(gspca_dev, 0x8339, reg8339, 2);
+ }
break;
}
}
__u8 *data, /* isoc packet */
int len) /* iso packet length */
{
+ struct sd *sd = (struct sd *) gspca_dev;
+
switch (data[0]) {
case 0: /* start of frame */
frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
frame, data, len);
} else {
/* raw bayer (with a header, which we skip) */
- data += 20;
- len -= 20;
+ if (sd->chip_revision == Rev012A) {
+ data += 20;
+ len -= 20;
+ } else {
+ data += 16;
+ len -= 16;
+ }
gspca_frame_add(gspca_dev, FIRST_PACKET,
frame, data, len);
}
gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
}
+/* rev 72a only */
static void setbrightness(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
__u8 value;
- switch (sd->chip_revision) {
- case Rev072A:
- value = sd->brightness;
- reg_w_val(gspca_dev->dev, value, 0x8611);
- reg_w_val(gspca_dev->dev, value, 0x8612);
- reg_w_val(gspca_dev->dev, value, 0x8613);
- reg_w_val(gspca_dev->dev, value, 0x8614);
- break;
- default:
-/* case Rev012A: */
- setcontrast(gspca_dev);
- break;
- }
+ value = sd->brightness;
+ reg_w_val(gspca_dev->dev, 0x8611, value);
+ reg_w_val(gspca_dev->dev, 0x8612, value);
+ reg_w_val(gspca_dev->dev, 0x8613, value);
+ reg_w_val(gspca_dev->dev, 0x8614, value);
}
static void getbrightness(struct gspca_dev *gspca_dev)
struct sd *sd = (struct sd *) gspca_dev;
__u16 tot;
- switch (sd->chip_revision) {
- case Rev072A:
- tot = 0;
- reg_r(gspca_dev, 0x8611, 1);
- tot += gspca_dev->usb_buf[0];
- reg_r(gspca_dev, 0x8612, 1);
- tot += gspca_dev->usb_buf[0];
- reg_r(gspca_dev, 0x8613, 1);
- tot += gspca_dev->usb_buf[0];
- reg_r(gspca_dev, 0x8614, 1);
- tot += gspca_dev->usb_buf[0];
- sd->brightness = tot >> 2;
- break;
- default:
-/* case Rev012A: */
- /* no way to read sensor settings */
- break;
- }
+ tot = 0;
+ reg_r(gspca_dev, 0x8611, 1);
+ tot += gspca_dev->usb_buf[0];
+ reg_r(gspca_dev, 0x8612, 1);
+ tot += gspca_dev->usb_buf[0];
+ reg_r(gspca_dev, 0x8613, 1);
+ tot += gspca_dev->usb_buf[0];
+ reg_r(gspca_dev, 0x8614, 1);
+ tot += gspca_dev->usb_buf[0];
+ sd->brightness = tot >> 2;
}
+/* rev72a only */
static void getcontrast(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
__u16 tot;
- switch (sd->chip_revision) {
- case Rev072A:
- tot = 0;
- reg_r(gspca_dev, 0x8651, 1);
- tot += gspca_dev->usb_buf[0];
- reg_r(gspca_dev, 0x8652, 1);
- tot += gspca_dev->usb_buf[0];
- reg_r(gspca_dev, 0x8653, 1);
- tot += gspca_dev->usb_buf[0];
- reg_r(gspca_dev, 0x8654, 1);
- tot += gspca_dev->usb_buf[0];
- sd->contrast = tot << 6;
- break;
- default:
-/* case Rev012A: */
- /* no way to read sensor settings */
- break;
- }
+ tot = 0;
+ reg_r(gspca_dev, 0x8651, 1);
+ tot += gspca_dev->usb_buf[0];
+ reg_r(gspca_dev, 0x8652, 1);
+ tot += gspca_dev->usb_buf[0];
+ reg_r(gspca_dev, 0x8653, 1);
+ tot += gspca_dev->usb_buf[0];
+ reg_r(gspca_dev, 0x8654, 1);
+ tot += gspca_dev->usb_buf[0];
+ sd->contrast = tot << 6;
PDEBUG(D_CONF, "get contrast %d", sd->contrast);
}
+/* rev 72a only */
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
return 0;
}
+/* rev 72a only */
static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
return 0;
}
+/* rev12a only */
+static int sd_setwhite(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->white = val;
+ if (gspca_dev->streaming)
+ setwhite(gspca_dev);
+ return 0;
+}
+
+static int sd_getwhite(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->white;
+ return 0;
+}
+
+/* rev12a only */
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->exposure = val;
+ if (gspca_dev->streaming)
+ setexposure(gspca_dev);
+ return 0;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->exposure;
+ return 0;
+}
+
+/* rev12a only */
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->gain = val;
+ if (gspca_dev->streaming)
+ setgain(gspca_dev);
+ return 0;
+}
+
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->gain;
+ return 0;
+}
+
+/* control tables */
+static struct ctrl sd_ctrls_12a[] = {
+ {
+ {
+ .id = V4L2_CID_DO_WHITE_BALANCE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "While Balance",
+ .minimum = WHITE_MIN,
+ .maximum = WHITE_MAX,
+ .step = 1,
+ .default_value = WHITE_DEF,
+ },
+ .set = sd_setwhite,
+ .get = sd_getwhite,
+ },
+ {
+ {
+ .id = V4L2_CID_EXPOSURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Exposure",
+ .minimum = EXPOSURE_MIN,
+ .maximum = EXPOSURE_MAX,
+ .step = 1,
+ .default_value = EXPOSURE_DEF,
+ },
+ .set = sd_setexposure,
+ .get = sd_getexposure,
+ },
+ {
+ {
+ .id = V4L2_CID_AUTOGAIN,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Auto Gain",
+ .minimum = AUTOGAIN_MIN,
+ .maximum = AUTOGAIN_MAX,
+ .step = 1,
+ .default_value = AUTOGAIN_DEF,
+ },
+ .set = sd_setautogain,
+ .get = sd_getautogain,
+ },
+ {
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain",
+ .minimum = GAIN_MIN,
+ .maximum = GAIN_MAX,
+ .step = 1,
+ .default_value = GAIN_DEF,
+ },
+ .set = sd_setgain,
+ .get = sd_getgain,
+ },
+};
+
+static struct ctrl sd_ctrls_72a[] = {
+ {
+ {
+ .id = V4L2_CID_BRIGHTNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Brightness",
+ .minimum = BRIGHTNESS_MIN,
+ .maximum = BRIGHTNESS_MAX,
+ .step = 1,
+ .default_value = BRIGHTNESS_DEF,
+ },
+ .set = sd_setbrightness,
+ .get = sd_getbrightness,
+ },
+ {
+ {
+ .id = V4L2_CID_CONTRAST,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Contrast",
+ .minimum = CONTRAST_MIN,
+ .maximum = CONTRAST_MAX,
+ .step = 1,
+ .default_value = CONTRAST_DEF,
+ },
+ .set = sd_setcontrast,
+ .get = sd_getcontrast,
+ },
+ {
+ {
+ .id = V4L2_CID_AUTOGAIN,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Auto Gain",
+ .minimum = AUTOGAIN_MIN,
+ .maximum = AUTOGAIN_MAX,
+ .step = 1,
+ .default_value = AUTOGAIN_DEF,
+ },
+ .set = sd_setautogain,
+ .get = sd_getautogain,
+ },
+};
+
/* sub-driver description */
-static const struct sd_desc sd_desc = {
+static const struct sd_desc sd_desc_12a = {
+ .name = MODULE_NAME,
+ .ctrls = sd_ctrls_12a,
+ .nctrls = ARRAY_SIZE(sd_ctrls_12a),
+ .config = sd_config,
+ .init = sd_init_12a,
+ .start = sd_start_12a,
+ .stopN = sd_stopN,
+ .stop0 = sd_stop0,
+ .pkt_scan = sd_pkt_scan,
+/* .dq_callback = do_autogain, * fixme */
+};
+static const struct sd_desc sd_desc_72a = {
.name = MODULE_NAME,
- .ctrls = sd_ctrls,
- .nctrls = ARRAY_SIZE(sd_ctrls),
+ .ctrls = sd_ctrls_72a,
+ .nctrls = ARRAY_SIZE(sd_ctrls_72a),
.config = sd_config,
- .open = sd_open,
- .start = sd_start,
+ .init = sd_init_72a,
+ .start = sd_start_72a,
.stopN = sd_stopN,
.stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
.dq_callback = do_autogain,
};
+static const struct sd_desc *sd_desc[2] = {
+ &sd_desc_12a,
+ &sd_desc_72a
+};
/* -- module initialisation -- */
static const __devinitdata struct usb_device_id device_table[] = {
static int sd_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
- return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+ return gspca_dev_probe(intf, id,
+ sd_desc[id->driver_info],
+ sizeof(struct sd),
THIS_MODULE);
}
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
int ret;
PDEBUG(D_STREAM, "camera stopped");
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
.querymenu = sd_querymenu,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
0x1e, 0x1e, 0x1e, 0x1e, 0x1e, 0x1e, 0x1e, 0x1e}
};
-static void reg_r(struct usb_device *dev,
- __u16 req,
- __u16 index,
- __u8 *buffer, __u16 length)
+/* read <len> bytes to gspca_dev->usb_buf */
+static void reg_r(struct gspca_dev *gspca_dev,
+ __u16 req,
+ __u16 index,
+ __u16 len)
{
- usb_control_msg(dev,
- usb_rcvctrlpipe(dev, 0),
+#ifdef GSPCA_DEBUG
+ if (len > USB_BUF_SZ) {
+ err("reg_r: buffer overflow");
+ return;
+ }
+#endif
+ usb_control_msg(gspca_dev->dev,
+ usb_rcvctrlpipe(gspca_dev->dev, 0),
req,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, /* value */
- index, buffer, length,
+ index,
+ len ? gspca_dev->usb_buf : NULL, len,
500);
}
-static void reg_w(struct usb_device *dev,
- __u16 req,
- __u16 value,
- __u16 index,
- __u8 *buffer, __u16 length)
+/* write <len> bytes from gspca_dev->usb_buf */
+static void reg_w(struct gspca_dev *gspca_dev,
+ __u16 req,
+ __u16 value,
+ __u16 index,
+ __u16 len)
{
- usb_control_msg(dev,
- usb_sndctrlpipe(dev, 0),
+#ifdef GSPCA_DEBUG
+ if (len > USB_BUF_SZ) {
+ err("reg_w: buffer overflow");
+ return;
+ }
+#endif
+ usb_control_msg(gspca_dev->dev,
+ usb_sndctrlpipe(gspca_dev->dev, 0),
req,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value, index, buffer, length,
+ value, index,
+ len ? gspca_dev->usb_buf : NULL, len,
500);
}
int count = 10;
while (--count > 0) {
- reg_r(gspca_dev->dev, 0x21, 0, gspca_dev->usb_buf, 1);
+ reg_r(gspca_dev, 0x21, 0, 1);
if ((gspca_dev->usb_buf[0] & 0x01) == 0)
break;
msleep(10);
static void spca504B_WaitCmdStatus(struct gspca_dev *gspca_dev)
{
- struct usb_device *dev = gspca_dev->dev;
int count = 50;
while (--count > 0) {
- reg_r(dev, 0x21, 1, gspca_dev->usb_buf, 1);
+ reg_r(gspca_dev, 0x21, 1, 1);
if (gspca_dev->usb_buf[0] != 0) {
gspca_dev->usb_buf[0] = 0;
- reg_w(dev, 0x21, 0, 1, gspca_dev->usb_buf, 1);
- reg_r(dev, 0x21, 1, gspca_dev->usb_buf, 1);
+ reg_w(gspca_dev, 0x21, 0, 1, 1);
+ reg_r(gspca_dev, 0x21, 1, 1);
spca504B_PollingDataReady(gspca_dev);
break;
}
static void spca50x_GetFirmware(struct gspca_dev *gspca_dev)
{
- struct usb_device *dev = gspca_dev->dev;
__u8 *data;
- data = kmalloc(64, GFP_KERNEL);
- reg_r(dev, 0x20, 0, data, 5);
+ data = gspca_dev->usb_buf;
+ reg_r(gspca_dev, 0x20, 0, 5);
PDEBUG(D_STREAM, "FirmWare : %d %d %d %d %d ",
data[0], data[1], data[2], data[3], data[4]);
- reg_r(dev, 0x23, 0, data, 64);
- reg_r(dev, 0x23, 1, data, 64);
- kfree(data);
+ reg_r(gspca_dev, 0x23, 0, 64);
+ reg_r(gspca_dev, 0x23, 1, 64);
}
static void spca504B_SetSizeType(struct gspca_dev *gspca_dev)
Type = 0;
switch (sd->bridge) {
case BRIDGE_SPCA533:
- reg_w(dev, 0x31, 0, 0, NULL, 0);
+ reg_w(gspca_dev, 0x31, 0, 0, 0);
spca504B_WaitCmdStatus(gspca_dev);
rc = spca504B_PollingDataReady(gspca_dev);
spca50x_GetFirmware(gspca_dev);
gspca_dev->usb_buf[0] = 2; /* type */
- reg_w(dev, 0x24, 0, 8, gspca_dev->usb_buf, 1);
- reg_r(dev, 0x24, 8, gspca_dev->usb_buf, 1);
+ reg_w(gspca_dev, 0x24, 0, 8, 1);
+ reg_r(gspca_dev, 0x24, 8, 1);
gspca_dev->usb_buf[0] = Size;
- reg_w(dev, 0x25, 0, 4, gspca_dev->usb_buf, 1);
- reg_r(dev, 0x25, 4, gspca_dev->usb_buf, 1); /* size */
+ reg_w(gspca_dev, 0x25, 0, 4, 1);
+ reg_r(gspca_dev, 0x25, 4, 1); /* size */
rc = spca504B_PollingDataReady(gspca_dev);
/* Init the cam width height with some values get on init ? */
- reg_w(dev, 0x31, 0, 4, NULL, 0);
+ reg_w(gspca_dev, 0x31, 0, 4, 0);
spca504B_WaitCmdStatus(gspca_dev);
rc = spca504B_PollingDataReady(gspca_dev);
break;
/* case BRIDGE_SPCA504B: */
/* case BRIDGE_SPCA536: */
gspca_dev->usb_buf[0] = Size;
- reg_w(dev, 0x25, 0, 4, gspca_dev->usb_buf, 1);
- reg_r(dev, 0x25, 4, gspca_dev->usb_buf, 1); /* size */
+ reg_w(gspca_dev, 0x25, 0, 4, 1);
+ reg_r(gspca_dev, 0x25, 4, 1); /* size */
Type = 6;
gspca_dev->usb_buf[0] = Type;
- reg_w(dev, 0x27, 0, 0, gspca_dev->usb_buf, 1);
- reg_r(dev, 0x27, 0, gspca_dev->usb_buf, 1); /* type */
+ reg_w(gspca_dev, 0x27, 0, 0, 1);
+ reg_r(gspca_dev, 0x27, 0, 1); /* type */
rc = spca504B_PollingDataReady(gspca_dev);
break;
case BRIDGE_SPCA504:
static void spca504B_setQtable(struct gspca_dev *gspca_dev)
{
- struct usb_device *dev = gspca_dev->dev;
-
gspca_dev->usb_buf[0] = 3;
- reg_w(dev, 0x26, 0, 0, gspca_dev->usb_buf, 1);
- reg_r(dev, 0x26, 0, gspca_dev->usb_buf, 1);
+ reg_w(gspca_dev, 0x26, 0, 0, 1);
+ reg_r(gspca_dev, 0x26, 0, 1);
spca504B_PollingDataReady(gspca_dev);
}
static void sp5xx_initContBrigHueRegisters(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- struct usb_device *dev = gspca_dev->dev;
int pollreg = 1;
switch (sd->bridge) {
default:
/* case BRIDGE_SPCA533: */
/* case BRIDGE_SPCA504B: */
- reg_w(dev, 0, 0, 0x21a7, NULL, 0); /* brightness */
- reg_w(dev, 0, 0x20, 0x21a8, NULL, 0); /* contrast */
- reg_w(dev, 0, 0, 0x21ad, NULL, 0); /* hue */
- reg_w(dev, 0, 1, 0x21ac, NULL, 0); /* sat/hue */
- reg_w(dev, 0, 0x20, 0x21ae, NULL, 0); /* saturation */
- reg_w(dev, 0, 0, 0x21a3, NULL, 0); /* gamma */
+ reg_w(gspca_dev, 0, 0, 0x21a7, 0); /* brightness */
+ reg_w(gspca_dev, 0, 0x20, 0x21a8, 0); /* contrast */
+ reg_w(gspca_dev, 0, 0, 0x21ad, 0); /* hue */
+ reg_w(gspca_dev, 0, 1, 0x21ac, 0); /* sat/hue */
+ reg_w(gspca_dev, 0, 0x20, 0x21ae, 0); /* saturation */
+ reg_w(gspca_dev, 0, 0, 0x21a3, 0); /* gamma */
break;
case BRIDGE_SPCA536:
- reg_w(dev, 0, 0, 0x20f0, NULL, 0);
- reg_w(dev, 0, 0x21, 0x20f1, NULL, 0);
- reg_w(dev, 0, 0x40, 0x20f5, NULL, 0);
- reg_w(dev, 0, 1, 0x20f4, NULL, 0);
- reg_w(dev, 0, 0x40, 0x20f6, NULL, 0);
- reg_w(dev, 0, 0, 0x2089, NULL, 0);
+ reg_w(gspca_dev, 0, 0, 0x20f0, 0);
+ reg_w(gspca_dev, 0, 0x21, 0x20f1, 0);
+ reg_w(gspca_dev, 0, 0x40, 0x20f5, 0);
+ reg_w(gspca_dev, 0, 1, 0x20f4, 0);
+ reg_w(gspca_dev, 0, 0x40, 0x20f6, 0);
+ reg_w(gspca_dev, 0, 0, 0x2089, 0);
break;
}
if (pollreg)
const struct usb_device_id *id)
{
struct sd *sd = (struct sd *) gspca_dev;
- struct usb_device *dev = gspca_dev->dev;
struct cam *cam;
cam = &gspca_dev->cam;
if (sd->subtype == AiptekMiniPenCam13) {
/* try to get the firmware as some cam answer 2.0.1.2.2
* and should be a spca504b then overwrite that setting */
- reg_r(dev, 0x20, 0, gspca_dev->usb_buf, 1);
+ reg_r(gspca_dev, 0x20, 0, 1);
switch (gspca_dev->usb_buf[0]) {
case 1:
break; /* (right bridge/subtype) */
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
struct usb_device *dev = gspca_dev->dev;
switch (sd->bridge) {
case BRIDGE_SPCA504B:
- reg_w(dev, 0x1d, 0, 0, NULL, 0);
- reg_w(dev, 0, 1, 0x2306, NULL, 0);
- reg_w(dev, 0, 0, 0x0d04, NULL, 0);
- reg_w(dev, 0, 0, 0x2000, NULL, 0);
- reg_w(dev, 0, 0x13, 0x2301, NULL, 0);
- reg_w(dev, 0, 0, 0x2306, NULL, 0);
+ reg_w(gspca_dev, 0x1d, 0, 0, 0);
+ reg_w(gspca_dev, 0, 1, 0x2306, 0);
+ reg_w(gspca_dev, 0, 0, 0x0d04, 0);
+ reg_w(gspca_dev, 0, 0, 0x2000, 0);
+ reg_w(gspca_dev, 0, 0x13, 0x2301, 0);
+ reg_w(gspca_dev, 0, 0, 0x2306, 0);
/* fall thru */
case BRIDGE_SPCA533:
rc = spca504B_PollingDataReady(gspca_dev);
break;
case BRIDGE_SPCA536:
spca50x_GetFirmware(gspca_dev);
- reg_r(dev, 0x00, 0x5002, gspca_dev->usb_buf, 1);
+ reg_r(gspca_dev, 0x00, 0x5002, 1);
gspca_dev->usb_buf[0] = 0;
- reg_w(dev, 0x24, 0, 0, gspca_dev->usb_buf, 1);
- reg_r(dev, 0x24, 0, gspca_dev->usb_buf, 1);
+ reg_w(gspca_dev, 0x24, 0, 0, 1);
+ reg_r(gspca_dev, 0x24, 0, 1);
rc = spca504B_PollingDataReady(gspca_dev);
- reg_w(dev, 0x34, 0, 0, NULL, 0);
+ reg_w(gspca_dev, 0x34, 0, 0, 0);
spca504B_WaitCmdStatus(gspca_dev);
break;
case BRIDGE_SPCA504C: /* pccam600 */
/* case BRIDGE_SPCA536: */
if (sd->subtype == MegapixV4 ||
sd->subtype == LogitechClickSmart820) {
- reg_w(dev, 0xf0, 0, 0, NULL, 0);
+ reg_w(gspca_dev, 0xf0, 0, 0, 0);
spca504B_WaitCmdStatus(gspca_dev);
- reg_r(dev, 0xf0, 4, NULL, 0);
+ reg_r(gspca_dev, 0xf0, 4, 0);
spca504B_WaitCmdStatus(gspca_dev);
} else {
- reg_w(dev, 0x31, 0, 4, NULL, 0);
+ reg_w(gspca_dev, 0x31, 0, 4, 0);
spca504B_WaitCmdStatus(gspca_dev);
rc = spca504B_PollingDataReady(gspca_dev);
}
/* case BRIDGE_SPCA533: */
/* case BRIDGE_SPCA536: */
/* case BRIDGE_SPCA504B: */
- reg_w(dev, 0x31, 0, 0, NULL, 0);
+ reg_w(gspca_dev, 0x31, 0, 0, 0);
spca504B_WaitCmdStatus(gspca_dev);
spca504B_PollingDataReady(gspca_dev);
break;
}
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
#define MAX_GAMMA 0x10 /* 0 to 15 */
-#define V4L2_CID_EFFECTS (V4L2_CID_PRIVATE_BASE + 3)
+#define V4L2_CID_EFFECTS (V4L2_CID_PRIVATE_BASE + 0)
MODULE_AUTHOR("Leandro Costantino <le_costantino@pixartargentina.com.ar>");
MODULE_DESCRIPTION("GSPCA/T613 (JPEG Compliance) USB Camera Driver");
static struct v4l2_pix_format vga_mode_t16[] = {
{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
.bytesperline = 160,
- .sizeimage = 160 * 120 * 3 / 8 + 590,
+ .sizeimage = 160 * 120 * 4 / 8 + 590,
.colorspace = V4L2_COLORSPACE_JPEG,
.priv = 4},
{176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
NULL, 0, 500);
return;
}
- if (len <= sizeof gspca_dev->usb_buf) {
+ if (len <= USB_BUF_SZ) {
memcpy(gspca_dev->usb_buf, buffer, len);
usb_control_msg(gspca_dev->dev,
usb_sndctrlpipe(gspca_dev->dev, 0),
return 0;
}
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+ init_default_parameters(gspca_dev);
+ return 0;
+}
+
static void setbrightness(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
setcolors(gspca_dev);
}
-static void sd_stopN(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
return -EINVAL;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
-{
- init_default_parameters(gspca_dev);
- return 0;
-}
-
/* sub-driver description */
static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
- .stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
.querymenu = sd_querymenu,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
}
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
reg_w_1(gspca_dev, TV8532_AD_SLOPE, 0x32);
reg_w_1(gspca_dev, TV8532_AD_BITCTRL, 0x00);
reg_w_1(gspca_dev, TV8532_GPIO_OE, 0x0b);
}
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void tv8532_preprocess(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
- .stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
.set = sd_setautogain,
.get = sd_getautogain,
},
+#define LIGHTFREQ_IDX 1
{
{
.id = V4L2_CID_POWER_LINE_FREQUENCY,
};
static struct v4l2_pix_format vc0321_mode[] = {
- {320, 240, V4L2_PIX_FMT_YUV420, V4L2_FIELD_NONE,
+ {320, 240, V4L2_PIX_FMT_YVYU, V4L2_FIELD_NONE,
.bytesperline = 320,
.sizeimage = 320 * 240 * 2,
.colorspace = V4L2_COLORSPACE_SRGB,
.priv = 1},
- {640, 480, V4L2_PIX_FMT_YUV420, V4L2_FIELD_NONE,
+ {640, 480, V4L2_PIX_FMT_YVYU, V4L2_FIELD_NONE,
.bytesperline = 640,
.sizeimage = 640 * 480 * 2,
.colorspace = V4L2_COLORSPACE_SRGB,
sd->qindex = 7;
sd->autogain = AUTOGAIN_DEF;
sd->lightfreq = FREQ_DEF;
+ if (sd->sensor != SENSOR_OV7670)
+ gspca_dev->ctrl_dis = (1 << LIGHTFREQ_IDX);
if (sd->bridge == BRIDGE_VC0321) {
reg_r(gspca_dev, 0x8a, 0, 3);
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
return 0;
}
reg_w(dev, 0x89, 0xffff, 0xffff);
}
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-/* struct usb_device *dev = gspca_dev->dev;
- __u8 buffread;
-
- reg_w(dev, 0x89, 0xffff, 0xffff);
- reg_w(dev, 0xa0, 0x01, 0xb301);
- reg_w(dev, 0xa0, 0x09, 0xb303);
- reg_w(dev, 0x89, 0xffff, 0xffff);
-*/
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame, /* target */
__u8 *data, /* isoc packet */
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
.stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
.querymenu = sd_querymenu,
};
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
/* -- module insert / remove -- */
static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val);
static struct ctrl sd_ctrls[] = {
+#define BRIGHTNESS_IDX 0
#define SD_BRIGHTNESS 0
{
{
.set = sd_setautogain,
.get = sd_getautogain,
},
+#define LIGHTFREQ_IDX 4
#define SD_FREQ 4
{
{
case SENSOR_MC501CB:
return -1; /* don't probe */
case SENSOR_TAS5130C_VF0250:
- /* may probe but with write in reg 0x0010 */
+ /* may probe but with no write in reg 0x0010 */
return -1; /* don't probe */
+ case SENSOR_PAS106:
+ sensor = sif_probe(gspca_dev);
+ if (sensor >= 0)
+ return sensor;
+ break;
}
sensor = vga_2wr_probe(gspca_dev);
if (sensor >= 0) {
/* next probe is needed for OmniVision ? */
}
sensor2 = vga_3wr_probe(gspca_dev);
- if (sensor2 >= 0) {
- if (sensor >= 0)
- return sensor;
- return sensor2;
- }
- return sif_probe(gspca_dev);
+ if (sensor2 >= 0
+ && sensor >= 0)
+ return sensor;
+ return sensor2;
}
/* this function is called at probe time */
sd->lightfreq = sd_ctrls[SD_FREQ].qctrl.default_value;
sd->sharpness = sd_ctrls[SD_SHARPNESS].qctrl.default_value;
+ switch (sd->sensor) {
+ case SENSOR_GC0305:
+ case SENSOR_OV7620:
+ case SENSOR_PO2030:
+ gspca_dev->ctrl_dis = (1 << BRIGHTNESS_IDX);
+ break;
+ case SENSOR_HDCS2020:
+ case SENSOR_HV7131B:
+ case SENSOR_HV7131C:
+ case SENSOR_OV7630C:
+ gspca_dev->ctrl_dis = (1 << LIGHTFREQ_IDX);
+ break;
+ }
+
/* switch the led off */
reg_w(gspca_dev->dev, 0x01, 0x0000);
return 0;
}
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
{
reg_w(gspca_dev->dev, 0x01, 0x0000);
return 0;
}
}
-static void sd_stopN(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_stop0(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
send_unknown(gspca_dev->dev, sd->sensor);
}
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
struct gspca_frame *frame,
__u8 *data,
.ctrls = sd_ctrls,
.nctrls = sizeof sd_ctrls / sizeof sd_ctrls[0],
.config = sd_config,
- .open = sd_open,
+ .init = sd_init,
.start = sd_start,
- .stopN = sd_stopN,
.stop0 = sd_stop0,
- .close = sd_close,
.pkt_scan = sd_pkt_scan,
.querymenu = sd_querymenu,
};
static const __devinitdata struct usb_device_id device_table[] = {
{USB_DEVICE(0x041e, 0x041e)},
-#ifndef CONFIG_USB_ZC0301
{USB_DEVICE(0x041e, 0x4017)},
- {USB_DEVICE(0x041e, 0x401c)},
+ {USB_DEVICE(0x041e, 0x401c), .driver_info = SENSOR_PAS106},
{USB_DEVICE(0x041e, 0x401e)},
{USB_DEVICE(0x041e, 0x401f)},
-#endif
+ {USB_DEVICE(0x041e, 0x4022)},
{USB_DEVICE(0x041e, 0x4029)},
-#ifndef CONFIG_USB_ZC0301
- {USB_DEVICE(0x041e, 0x4034)},
- {USB_DEVICE(0x041e, 0x4035)},
+ {USB_DEVICE(0x041e, 0x4034), .driver_info = SENSOR_PAS106},
+ {USB_DEVICE(0x041e, 0x4035), .driver_info = SENSOR_PAS106},
{USB_DEVICE(0x041e, 0x4036)},
{USB_DEVICE(0x041e, 0x403a)},
-#endif
{USB_DEVICE(0x041e, 0x4051), .driver_info = SENSOR_TAS5130C_VF0250},
{USB_DEVICE(0x041e, 0x4053), .driver_info = SENSOR_TAS5130C_VF0250},
-#ifndef CONFIG_USB_ZC0301
{USB_DEVICE(0x0458, 0x7007)},
{USB_DEVICE(0x0458, 0x700c)},
{USB_DEVICE(0x0458, 0x700f)},
-#endif
{USB_DEVICE(0x0461, 0x0a00)},
{USB_DEVICE(0x046d, 0x08a0)},
{USB_DEVICE(0x046d, 0x08a1)},
{USB_DEVICE(0x046d, 0x08aa)},
{USB_DEVICE(0x046d, 0x08ac)},
{USB_DEVICE(0x046d, 0x08ad)},
-#ifndef CONFIG_USB_ZC0301
+#if !defined CONFIG_USB_ZC0301 && !defined CONFIG_USB_ZC0301_MODULE
{USB_DEVICE(0x046d, 0x08ae)},
#endif
{USB_DEVICE(0x046d, 0x08af)},
{USB_DEVICE(0x046d, 0x08d8)},
{USB_DEVICE(0x046d, 0x08da)},
{USB_DEVICE(0x046d, 0x08dd), .driver_info = SENSOR_MC501CB},
- {USB_DEVICE(0x0471, 0x0325)},
- {USB_DEVICE(0x0471, 0x0326)},
- {USB_DEVICE(0x0471, 0x032d)},
- {USB_DEVICE(0x0471, 0x032e)},
+ {USB_DEVICE(0x0471, 0x0325), .driver_info = SENSOR_PAS106},
+ {USB_DEVICE(0x0471, 0x0326), .driver_info = SENSOR_PAS106},
+ {USB_DEVICE(0x0471, 0x032d), .driver_info = SENSOR_PAS106},
+ {USB_DEVICE(0x0471, 0x032e), .driver_info = SENSOR_PAS106},
{USB_DEVICE(0x055f, 0xc005)},
-#ifndef CONFIG_USB_ZC0301
{USB_DEVICE(0x055f, 0xd003)},
{USB_DEVICE(0x055f, 0xd004)},
-#endif
{USB_DEVICE(0x0698, 0x2003)},
+ {USB_DEVICE(0x0ac8, 0x0301), .driver_info = SENSOR_PAS106},
{USB_DEVICE(0x0ac8, 0x0302)},
-#ifndef CONFIG_USB_ZC0301
{USB_DEVICE(0x0ac8, 0x301b)},
+#if !defined CONFIG_USB_ZC0301 && !defined CONFIG_USB_ZC0301_MODULE
{USB_DEVICE(0x0ac8, 0x303b)},
#endif
{USB_DEVICE(0x0ac8, 0x305b), .driver_info = SENSOR_TAS5130C_VF0250},
-#ifndef CONFIG_USB_ZC0301
{USB_DEVICE(0x0ac8, 0x307b)},
{USB_DEVICE(0x10fd, 0x0128)},
+ {USB_DEVICE(0x10fd, 0x804d)},
{USB_DEVICE(0x10fd, 0x8050)},
-#endif
{} /* end of entry */
};
#undef DVNAME
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
};
static int __init sd_mod_init(void)
spin_lock_init(&itv->lock);
spin_lock_init(&itv->dma_reg_lock);
- itv->irq_work_queues = create_workqueue(itv->name);
+ itv->irq_work_queues = create_singlethread_workqueue(itv->name);
if (itv->irq_work_queues == NULL) {
IVTV_ERR("Could not create ivtv workqueue\n");
return -1;
#define IVTV_F_I_DEC_PAUSED 20 /* the decoder is paused */
#define IVTV_F_I_INITED 21 /* set after first open */
#define IVTV_F_I_FAILED 22 /* set if first open failed */
+#define IVTV_F_I_WORK_INITED 23 /* worker thread was initialized */
/* Event notifications */
#define IVTV_F_I_EV_DEC_STOPPED 28 /* decoder stopped event */
DEFINE_WAIT(wait);
+ if (test_and_clear_bit(IVTV_F_I_WORK_INITED, &itv->i_flags)) {
+ struct sched_param param = { .sched_priority = 99 };
+
+ /* This thread must use the FIFO scheduler as it
+ is realtime sensitive. */
+ sched_setscheduler(current, SCHED_FIFO, ¶m);
+ }
if (test_and_clear_bit(IVTV_F_I_WORK_HANDLER_PIO, &itv->i_flags))
ivtv_pio_work_handler(itv);
static void ivtv_irq_enc_vbi_cap(struct ivtv *itv)
{
- struct ivtv_stream *s_mpg = &itv->streams[IVTV_ENC_STREAM_TYPE_MPG];
u32 data[CX2341X_MBOX_MAX_DATA];
struct ivtv_stream *s;
IVTV_DEBUG_HI_IRQ("ENC START VBI CAP\n");
s = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI];
- /* If more than two VBI buffers are pending, then
- clear the old ones and start with this new one.
- This can happen during transition stages when MPEG capturing is
- started, but the first interrupts haven't arrived yet. During
- that period VBI requests can accumulate without being able to
- DMA the data. Since at most four VBI DMA buffers are available,
- we just drop the old requests when there are already three
- requests queued. */
- if (s->sg_pending_size > 2) {
- struct ivtv_buffer *buf;
- list_for_each_entry(buf, &s->q_predma.list, list)
- ivtv_buf_sync_for_cpu(s, buf);
- ivtv_queue_move(s, &s->q_predma, NULL, &s->q_free, 0);
- s->sg_pending_size = 0;
- }
- /* if we can append the data, and the MPEG stream isn't capturing,
- then start a DMA request for just the VBI data. */
- if (!stream_enc_dma_append(s, data) &&
- !test_bit(IVTV_F_S_STREAMING, &s_mpg->s_flags)) {
+ if (!stream_enc_dma_append(s, data))
set_bit(ivtv_use_pio(s) ? IVTV_F_S_PIO_PENDING : IVTV_F_S_DMA_PENDING, &s->s_flags);
- }
}
static void ivtv_irq_dec_vbi_reinsert(struct ivtv *itv)
#define IVTV_QUEUE_H
#define IVTV_DMA_UNMAPPED ((u32) -1)
-#define SLICED_VBI_PIO 1
+#define SLICED_VBI_PIO 0
/* ivtv_buffer utility functions */
/* Every X number of frames a VBI interrupt arrives (frames as in 25 or 30 fps) */
data[1] = 1;
/* The VBI frames are stored in a ringbuffer with this size (with a VBI frame as unit) */
- data[2] = raw ? 4 : 8;
+ data[2] = raw ? 4 : 4 * (itv->vbi.raw_size / itv->vbi.enc_size);
/* The start/stop codes determine which VBI lines end up in the raw VBI data area.
The codes are from table 24 in the saa7115 datasheet. Each raw/sliced/video line
is framed with codes FF0000XX where XX is the SAV/EAV (Start/End of Active Video)
u32 line_size = itv->vbi.sliced_decoder_line_size;
struct v4l2_decode_vbi_line vbi;
int i;
+ unsigned lines = 0;
/* find the first valid line */
for (i = 0; i < size; i++, buf++) {
}
vbi.p = p + 4;
itv->video_dec_func(itv, VIDIOC_INT_DECODE_VBI_LINE, &vbi);
- if (vbi.type) {
+ if (vbi.type && !(lines & (1 << vbi.line))) {
+ lines |= 1 << vbi.line;
itv->vbi.sliced_data[line].id = vbi.type;
itv->vbi.sliced_data[line].field = vbi.is_second_field;
itv->vbi.sliced_data[line].line = vbi.line;
#define IVTV_DRIVER_NAME "ivtv"
#define IVTV_DRIVER_VERSION_MAJOR 1
-#define IVTV_DRIVER_VERSION_MINOR 3
+#define IVTV_DRIVER_VERSION_MINOR 4
#define IVTV_DRIVER_VERSION_PATCHLEVEL 0
#define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL)
case DECODER_ENABLE_OUTPUT:
{
+ int enable;
- int *iarg = arg;
- int enable = (*iarg != 0);
- if (enable) {
- dprintk("ks0127: command "
+ iarg = arg;
+ enable = (*iarg != 0);
+ if (enable) {
+ dprintk("ks0127: command "
"DECODER_ENABLE_OUTPUT on "
"(%d)\n", enable);
- /* All output pins on */
- ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x30);
- /* Obey the OEN pin */
- ks0127_and_or(ks, KS_CDEM, 0x7f, 0x00);
- } else {
- dprintk("ks0127: command "
+ /* All output pins on */
+ ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x30);
+ /* Obey the OEN pin */
+ ks0127_and_or(ks, KS_CDEM, 0x7f, 0x00);
+ } else {
+ dprintk("ks0127: command "
"DECODER_ENABLE_OUTPUT off "
"(%d)\n", enable);
- /* Video output pins off */
- ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x00);
- /* Ignore the OEN pin */
- ks0127_and_or(ks, KS_CDEM, 0x7f, 0x80);
- }
+ /* Video output pins off */
+ ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x00);
+ /* Ignore the OEN pin */
+ ks0127_and_or(ks, KS_CDEM, 0x7f, 0x80);
+ }
}
break;
memcpy(meye.video_dev, &meye_template, sizeof(meye_template));
meye.video_dev->parent = &meye.mchip_dev->dev;
+ ret = -EIO;
if ((ret = sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 1))) {
printk(KERN_ERR "meye: unable to power on the camera\n");
printk(KERN_ERR "meye: did you enable the camera in "
goto outsonypienable;
}
- ret = -EIO;
if ((ret = pci_enable_device(meye.mchip_dev))) {
printk(KERN_ERR "meye: pci_enable_device failed\n");
goto outenabledev;
return 0;
}
-static int std_callback(struct saa7146_dev* dev, struct saa7146_standard *std)
+static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *standard)
{
- struct mxb* mxb = (struct mxb*)dev->ext_priv;
+ struct mxb *mxb = (struct mxb *)dev->ext_priv;
int zero = 0;
int one = 1;
- if(V4L2_STD_PAL_I == std->id ) {
+ if (V4L2_STD_PAL_I == standard->id) {
v4l2_std_id std = V4L2_STD_PAL_I;
+
DEB_D(("VIDIOC_S_STD: setting mxb for PAL_I.\n"));
/* set the 7146 gpio register -- I don't know what this does exactly */
saa7146_write(dev, GPIO_CTRL, 0x00404050);
/* unset the 7111 gpio register -- I don't know what this does exactly */
- mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &zero);
+ mxb->saa7111a->driver->command(mxb->saa7111a, DECODER_SET_GPIO, &zero);
mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);
} else {
v4l2_std_id std = V4L2_STD_PAL_BG;
+
DEB_D(("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM.\n"));
/* set the 7146 gpio register -- I don't know what this does exactly */
saa7146_write(dev, GPIO_CTRL, 0x00404050);
/* set the 7111 gpio register -- I don't know what this does exactly */
- mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &one);
+ mxb->saa7111a->driver->command(mxb->saa7111a, DECODER_SET_GPIO, &one);
mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);
}
return 0;
break;
/* Retry until idle */
- do
+ do {
rc = reg_r(ov, R511_I2C_CTL);
- while (rc > 0 && ((rc&1) == 0));
+ } while (rc > 0 && ((rc&1) == 0));
if (rc < 0)
break;
return rc;
/* Retry until idle */
- do
- rc = reg_r(ov, R511_I2C_CTL);
- while (rc > 0 && ((rc&1) == 0));
+ do {
+ rc = reg_r(ov, R511_I2C_CTL);
+ } while (rc > 0 && ((rc & 1) == 0));
if (rc < 0)
return rc;
return rc;
/* Retry until idle */
- do
+ do {
rc = reg_r(ov, R511_I2C_CTL);
- while (rc > 0 && ((rc&1) == 0));
+ } while (rc > 0 && ((rc&1) == 0));
if (rc < 0)
return rc;
* Initialization and module stuff
*/
+#ifndef MODULE
+static int enable;
+module_param(enable, int, 0);
+#endif
+
static int __init init_pms_cards(void)
{
printk(KERN_INFO "Mediavision Pro Movie Studio driver 0.02\n");
+#ifndef MODULE
+ if (!enable) {
+ printk(KERN_INFO "PMS: not enabled, use pms.enable=1 to "
+ "probe\n");
+ return -ENODEV;
+ }
+#endif
+
data_port = io_port +1;
if(init_mediavision())
case VIDIOCPWCGVIDCMD:
{
- ARG_DEF(struct pwc_video_command, cmd);
-
- ARGR(cmd).type = pdev->type;
- ARGR(cmd).release = pdev->release;
- ARGR(cmd).command_len = pdev->cmd_len;
- memcpy(&ARGR(cmd).command_buf, pdev->cmd_buf, pdev->cmd_len);
- ARGR(cmd).bandlength = pdev->vbandlength;
- ARGR(cmd).frame_size = pdev->frame_size;
- ARG_OUT(cmd)
+ ARG_DEF(struct pwc_video_command, vcmd);
+
+ ARGR(vcmd).type = pdev->type;
+ ARGR(vcmd).release = pdev->release;
+ ARGR(vcmd).command_len = pdev->cmd_len;
+ memcpy(&ARGR(vcmd).command_buf, pdev->cmd_buf, pdev->cmd_len);
+ ARGR(vcmd).bandlength = pdev->vbandlength;
+ ARGR(vcmd).frame_size = pdev->frame_size;
+ ARG_OUT(vcmd)
break;
}
/*
client->addr << 1, client->adapter->name);
state = kzalloc(sizeof(struct saa711x_state), GFP_KERNEL);
- i2c_set_clientdata(client, state);
- if (state == NULL) {
+ if (state == NULL)
return -ENOMEM;
- }
+ i2c_set_clientdata(client, state);
state->input = -1;
state->output = SAA7115_IPORT_ON;
state->enable = 1;
mutex_init(&se401->lock);
wmb();
- if (video_register_device(&se401->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+ if (video_register_device(&se401->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
kfree(se401);
err("video_register_device failed");
return -EIO;
cam->v4ldev->fops = &sn9c102_fops;
cam->v4ldev->minor = video_nr[dev_nr];
cam->v4ldev->release = video_device_release;
+ cam->v4ldev->parent = &udev->dev;
init_completion(&cam->probe);
static const struct usb_device_id sn9c102_id_table[] = {
/* SN9C101 and SN9C102 */
+#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE
{ SN9C102_USB_DEVICE(0x0c45, 0x6001, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6005, BRIDGE_SN9C102), },
+#endif
{ SN9C102_USB_DEVICE(0x0c45, 0x6007, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6009, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x600d, BRIDGE_SN9C102), },
+/* { SN9C102_USB_DEVICE(0x0c45, 0x6011, BRIDGE_SN9C102), }, OV6650 */
{ SN9C102_USB_DEVICE(0x0c45, 0x6019, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6024, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6025, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x602a, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x602b, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x602c, BRIDGE_SN9C102), },
- { SN9C102_USB_DEVICE(0x0c45, 0x602d, BRIDGE_SN9C102), },
+/* { SN9C102_USB_DEVICE(0x0c45, 0x602d, BRIDGE_SN9C102), }, HV7131R */
{ SN9C102_USB_DEVICE(0x0c45, 0x602e, BRIDGE_SN9C102), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6030, BRIDGE_SN9C102), },
/* SN9C103 */
{ SN9C102_USB_DEVICE(0x0c45, 0x6080, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6082, BRIDGE_SN9C103), },
- { SN9C102_USB_DEVICE(0x0c45, 0x6083, BRIDGE_SN9C103), },
+/* { SN9C102_USB_DEVICE(0x0c45, 0x6083, BRIDGE_SN9C103), }, HY7131D/E */
{ SN9C102_USB_DEVICE(0x0c45, 0x6088, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x608a, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x608b, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x608c, BRIDGE_SN9C103), },
- { SN9C102_USB_DEVICE(0x0c45, 0x608e, BRIDGE_SN9C103), },
+/* { SN9C102_USB_DEVICE(0x0c45, 0x608e, BRIDGE_SN9C103), }, CISVF10 */
+#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE
{ SN9C102_USB_DEVICE(0x0c45, 0x608f, BRIDGE_SN9C103), },
+#endif
{ SN9C102_USB_DEVICE(0x0c45, 0x60a0, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x60a2, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x60a3, BRIDGE_SN9C103), },
- { SN9C102_USB_DEVICE(0x0c45, 0x60a8, BRIDGE_SN9C103), },
- { SN9C102_USB_DEVICE(0x0c45, 0x60aa, BRIDGE_SN9C103), },
- { SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), },
+/* { SN9C102_USB_DEVICE(0x0c45, 0x60a8, BRIDGE_SN9C103), }, PAS106 */
+/* { SN9C102_USB_DEVICE(0x0c45, 0x60aa, BRIDGE_SN9C103), }, TAS5130 */
+/* { SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), }, TAS5130 */
{ SN9C102_USB_DEVICE(0x0c45, 0x60ac, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x60ae, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x60af, BRIDGE_SN9C103), },
+#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE
{ SN9C102_USB_DEVICE(0x0c45, 0x60b0, BRIDGE_SN9C103), },
+#endif
{ SN9C102_USB_DEVICE(0x0c45, 0x60b2, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x60b3, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x60b8, BRIDGE_SN9C103), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6108, BRIDGE_SN9C120), },
{ SN9C102_USB_DEVICE(0x0c45, 0x610f, BRIDGE_SN9C120), },
{ SN9C102_USB_DEVICE(0x0c45, 0x6130, BRIDGE_SN9C120), },
- { SN9C102_USB_DEVICE(0x0c45, 0x6138, BRIDGE_SN9C120), },
+/* { SN9C102_USB_DEVICE(0x0c45, 0x6138, BRIDGE_SN9C120), }, MO8000 */
{ SN9C102_USB_DEVICE(0x0c45, 0x613a, BRIDGE_SN9C120), },
{ SN9C102_USB_DEVICE(0x0c45, 0x613b, BRIDGE_SN9C120), },
{ SN9C102_USB_DEVICE(0x0c45, 0x613c, BRIDGE_SN9C120), },
mutex_init (&stv680->lock);
wmb ();
- if (video_register_device (stv680->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+ if (video_register_device(stv680->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
PDEBUG (0, "STV(e): video_register_device failed");
retval = -EIO;
goto error_vdev;
* make black color and quit the horizontal scanning loop.
*/
if (((frame->curline + 2) >= scanHeight) || (i >= scanLength)) {
- const int j = i * V4L_BYTES_PER_PIXEL;
+ const int offset = i * V4L_BYTES_PER_PIXEL;
#if USES_IBMCAM_PUTPIXEL
/* Refresh 'f' because we don't use it much with PUTPIXEL */
- f = frame->data + (v4l_linesize * frame->curline) + j;
+ f = frame->data + (v4l_linesize * frame->curline) + offset;
#endif
- memset(f, 0, v4l_linesize - j);
+ memset(f, 0, v4l_linesize - offset);
break;
}
cam->udev = dev;
cam->bulkEndpoint = bulkEndpoint;
- if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1) == -1) {
+ if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1) < 0) {
kfree(cam);
printk(KERN_WARNING "video_register_device failed\n");
return -EIO;
int ret;
char *name_base;
+ if (vfd == NULL)
+ return -EINVAL;
+
switch (type) {
case VFL_TYPE_GRABBER:
base = MINOR_VFL_TYPE_GRABBER_MIN;
default:
printk(KERN_ERR "%s called with unknown type: %d\n",
__func__, type);
- return -1;
+ return -EINVAL;
}
/* pick a minor number */
p->timestamp.tv_sec / 3600,
(int)(p->timestamp.tv_sec / 60) % 60,
(int)(p->timestamp.tv_sec % 60),
- p->timestamp.tv_usec,
+ (long)p->timestamp.tv_usec,
p->index,
prt_names(p->type, v4l2_type_names),
p->bytesused, p->flags,
__video_do_ioctl will be called again, with one or more
V4L2 ioctls.
********************************************************/
- if (_IOC_TYPE(cmd) == 'v')
+ if (_IOC_TYPE(cmd) == 'v' && _IOC_NR(cmd) < BASE_VIDIOCPRIVATE)
return v4l_compat_translate_ioctl(inode, file, cmd, arg,
__video_do_ioctl);
#endif
dev = list_entry(list, struct vivi_dev, vivi_devlist);
if (-1 != dev->vfd->minor) {
- video_unregister_device(dev->vfd);
- printk(KERN_INFO "%s: /dev/video%d unregistered.\n",
+ printk(KERN_INFO "%s: unregistering /dev/video%d\n",
VIVI_MODULE_NAME, dev->vfd->minor);
+ video_unregister_device(dev->vfd);
} else {
- video_device_release(dev->vfd);
- printk(KERN_INFO "%s: /dev/video%d released.\n",
+ printk(KERN_INFO "%s: releasing /dev/video%d\n",
VIVI_MODULE_NAME, dev->vfd->minor);
+ video_device_release(dev->vfd);
}
kfree(dev);
Initialization and module stuff
------------------------------------------------------------------*/
+/* This routine allocates from 1 to n_devs virtual drivers.
+
+ The real maximum number of virtual drivers will depend on how many drivers
+ will succeed. This is limited to the maximum number of devices that
+ videodev supports. Since there are 64 minors for video grabbers, this is
+ currently the theoretical maximum limit. However, a further limit does
+ exist at videodev that forbids any driver to register more than 32 video
+ grabbers.
+ */
static int __init vivi_init(void)
{
int ret = -ENOMEM, i;
struct vivi_dev *dev;
struct video_device *vfd;
+ if (n_devs <= 0)
+ n_devs = 1;
+
for (i = 0; i < n_devs; i++) {
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (NULL == dev)
+ if (!dev)
break;
- list_add_tail(&dev->vivi_devlist, &vivi_devlist);
-
/* init video dma queues */
INIT_LIST_HEAD(&dev->vidq.active);
init_waitqueue_head(&dev->vidq.wq);
mutex_init(&dev->mutex);
vfd = video_device_alloc();
- if (NULL == vfd)
+ if (!vfd) {
+ kfree(dev);
break;
+ }
*vfd = vivi_template;
ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr);
- if (ret < 0)
+ if (ret < 0) {
+ video_device_release(vfd);
+ kfree(dev);
+
+ /* If some registers succeeded, keep driver */
+ if (i)
+ ret = 0;
+
break;
+ }
+
+ /* Now that everything is fine, let's add it to device list */
+ list_add_tail(&dev->vivi_devlist, &vivi_devlist);
snprintf(vfd->name, sizeof(vfd->name), "%s (%i)",
vivi_template.name, vfd->minor);
if (ret < 0) {
vivi_release();
printk(KERN_INFO "Error %d while loading vivi driver\n", ret);
- } else
+ } else {
printk(KERN_INFO "Video Technology Magazine Virtual Video "
"Capture Board ver %u.%u.%u successfully loaded.\n",
(VIVI_VERSION >> 16) & 0xFF, (VIVI_VERSION >> 8) & 0xFF,
VIVI_VERSION & 0xFF);
+
+ /* n_devs will reflect the actual number of allocated devices */
+ n_devs = i;
+ }
+
return ret;
}
MODULE_AUTHOR("Mauro Carvalho Chehab, Ted Walther and John Sokol");
MODULE_LICENSE("Dual BSD/GPL");
-module_param(video_nr, int, 0);
+module_param(video_nr, uint, 0444);
MODULE_PARM_DESC(video_nr, "video iminor start number");
-module_param(n_devs, int, 0);
+module_param(n_devs, uint, 0444);
MODULE_PARM_DESC(n_devs, "number of video devices to create");
module_param_named(debug, vivi_template.debug, int, 0444);
memcpy(&cam->vdev, &w9966_template, sizeof(struct video_device));
cam->vdev.priv = cam;
- if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1)
+ if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0)
return -1;
w9966_setState(cam, W9966_STATE_VDEV, W9966_STATE_VDEV);
cam->v4ldev->fops = &zc0301_fops;
cam->v4ldev->minor = video_nr[dev_nr];
cam->v4ldev->release = video_device_release;
+ cam->v4ldev->parent = &udev->dev;
video_set_drvdata(cam->v4ldev, cam);
init_completion(&cam->probe);
#define ZC0301_ID_TABLE \
static const struct usb_device_id zc0301_id_table[] = { \
- { ZC0301_USB_DEVICE(0x041e, 0x4017, 0xff), }, /* ICM105 */ \
- { ZC0301_USB_DEVICE(0x041e, 0x401c, 0xff), }, /* PAS106 */ \
- { ZC0301_USB_DEVICE(0x041e, 0x401e, 0xff), }, /* HV7131 */ \
- { ZC0301_USB_DEVICE(0x041e, 0x401f, 0xff), }, /* TAS5130 */ \
- { ZC0301_USB_DEVICE(0x041e, 0x4022, 0xff), }, \
- { ZC0301_USB_DEVICE(0x041e, 0x4034, 0xff), }, /* PAS106 */ \
- { ZC0301_USB_DEVICE(0x041e, 0x4035, 0xff), }, /* PAS106 */ \
- { ZC0301_USB_DEVICE(0x041e, 0x4036, 0xff), }, /* HV7131 */ \
- { ZC0301_USB_DEVICE(0x041e, 0x403a, 0xff), }, /* HV7131 */ \
- { ZC0301_USB_DEVICE(0x0458, 0x7007, 0xff), }, /* TAS5130 */ \
- { ZC0301_USB_DEVICE(0x0458, 0x700c, 0xff), }, /* TAS5130 */ \
- { ZC0301_USB_DEVICE(0x0458, 0x700f, 0xff), }, /* TAS5130 */ \
{ ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202 */ \
- { ZC0301_USB_DEVICE(0x055f, 0xd003, 0xff), }, /* TAS5130 */ \
- { ZC0301_USB_DEVICE(0x055f, 0xd004, 0xff), }, /* TAS5130 */ \
- { ZC0301_USB_DEVICE(0x0ac8, 0x0301, 0xff), }, \
- { ZC0301_USB_DEVICE(0x0ac8, 0x301b, 0xff), }, /* PB-0330/HV7131 */ \
{ ZC0301_USB_DEVICE(0x0ac8, 0x303b, 0xff), }, /* PB-0330 */ \
- { ZC0301_USB_DEVICE(0x10fd, 0x0128, 0xff), }, /* TAS5130 */ \
- { ZC0301_USB_DEVICE(0x10fd, 0x8050, 0xff), }, /* TAS5130 */ \
- { ZC0301_USB_DEVICE(0x10fd, 0x804e, 0xff), }, /* TAS5130 */ \
{ } \
};
}
static struct class memstick_host_class = {
- .name = "memstick_host",
+ .name = "memstick_host",
.dev_release = memstick_free
};
* @sg - TPC argument
*/
void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
- struct scatterlist *sg)
+ const struct scatterlist *sg)
{
mrq->tpc = tpc;
if (tpc & 8)
* user supplied buffer.
*/
void memstick_init_req(struct memstick_request *mrq, unsigned char tpc,
- void *buf, size_t length)
+ const void *buf, size_t length)
{
mrq->tpc = tpc;
if (tpc & 8)
if (!host->card) {
if (memstick_power_on(host))
goto out_power_off;
- } else
+ } else if (host->card->stop)
host->card->stop(host->card);
card = memstick_alloc_card(host);
|| !(host->card->check(host->card))) {
device_unregister(&host->card->dev);
host->card = NULL;
- } else
+ } else if (host->card->start)
host->card->start(host->card);
}
#define MSPRO_BLOCK_SIGNATURE 0xa5c3
#define MSPRO_BLOCK_MAX_ATTRIBUTES 41
+#define MSPRO_BLOCK_PART_SHIFT 3
+
enum {
MSPRO_BLOCK_ID_SYSINFO = 0x10,
MSPRO_BLOCK_ID_MODELNAME = 0x15,
static int mspro_block_disk_release(struct gendisk *disk)
{
struct mspro_block_data *msb = disk->private_data;
- int disk_id = disk->first_minor >> MEMSTICK_PART_SHIFT;
+ int disk_id = disk->first_minor >> MSPRO_BLOCK_PART_SHIFT;
mutex_lock(&mspro_block_disk_lock);
struct mspro_block_data *msb = memstick_get_drvdata(card);
int rc = 0;
+try_again:
if (msb->caps & MEMSTICK_CAP_PAR4)
rc = mspro_block_set_interface(card, MEMSTICK_SYS_PAR4);
else
rc = memstick_set_rw_addr(card);
if (!rc)
rc = mspro_block_set_interface(card, msb->system);
+
+ if (!rc) {
+ msleep(150);
+ rc = mspro_block_wait_for_ced(card);
+ if (rc)
+ return rc;
+
+ if (msb->caps & MEMSTICK_CAP_PAR8) {
+ msb->caps &= ~MEMSTICK_CAP_PAR8;
+ goto try_again;
+ }
+ }
}
return rc;
}
return -EIO;
msb->caps = host->caps;
- rc = mspro_block_switch_interface(card);
+
+ msleep(150);
+ rc = mspro_block_wait_for_ced(card);
if (rc)
return rc;
- msleep(200);
- rc = mspro_block_wait_for_ced(card);
+ rc = mspro_block_switch_interface(card);
if (rc)
return rc;
+
dev_dbg(&card->dev, "card activated\n");
if (msb->system != MEMSTICK_SYS_SERIAL)
msb->caps |= MEMSTICK_CAP_AUTO_GET_INT;
if (rc)
return rc;
- if ((disk_id << MEMSTICK_PART_SHIFT) > 255) {
+ if ((disk_id << MSPRO_BLOCK_PART_SHIFT) > 255) {
rc = -ENOSPC;
goto out_release_id;
}
- msb->disk = alloc_disk(1 << MEMSTICK_PART_SHIFT);
+ msb->disk = alloc_disk(1 << MSPRO_BLOCK_PART_SHIFT);
if (!msb->disk) {
rc = -ENOMEM;
goto out_release_id;
MSPRO_BLOCK_MAX_PAGES * msb->page_size);
msb->disk->major = major;
- msb->disk->first_minor = disk_id << MEMSTICK_PART_SHIFT;
+ msb->disk->first_minor = disk_id << MSPRO_BLOCK_PART_SHIFT;
msb->disk->fops = &ms_block_bdops;
msb->usage_count = 1;
msb->disk->private_data = msb;
static struct memstick_device_id mspro_block_id_tbl[] = {
{MEMSTICK_MATCH_ALL, MEMSTICK_TYPE_PRO, MEMSTICK_CATEGORY_STORAGE_DUO,
- MEMSTICK_CLASS_GENERIC_DUO},
+ MEMSTICK_CLASS_DUO},
{}
};
#define TPC_CODE_SZ_MASK 0x00000700
#define TPC_DATA_SZ_MASK 0x00000007
+#define HOST_CONTROL_TDELAY_EN 0x00040000
+#define HOST_CONTROL_HW_OC_P 0x00010000
#define HOST_CONTROL_RESET_REQ 0x00008000
#define HOST_CONTROL_REI 0x00004000
#define HOST_CONTROL_LED 0x00000400
#define HOST_CONTROL_RESET 0x00000100
#define HOST_CONTROL_POWER_EN 0x00000080
#define HOST_CONTROL_CLOCK_EN 0x00000040
+#define HOST_CONTROL_REO 0x00000008
#define HOST_CONTROL_IF_SHIFT 4
#define HOST_CONTROL_IF_SERIAL 0x0
#define PAD_PU_PD_ON_MS_SOCK1 0x0f0f0000
#define CLOCK_CONTROL_40MHZ 0x00000001
-#define CLOCK_CONTROL_50MHZ 0x00000002
+#define CLOCK_CONTROL_50MHZ 0x0000000a
#define CLOCK_CONTROL_60MHZ 0x00000008
#define CLOCK_CONTROL_62_5MHZ 0x0000000c
#define CLOCK_CONTROL_OFF 0x00000000
+#define PCI_CTL_CLOCK_DLY_ADDR 0x000000b0
+#define PCI_CTL_CLOCK_DLY_MASK_A 0x00000f00
+#define PCI_CTL_CLOCK_DLY_MASK_B 0x0000f000
+
enum {
CMD_READY = 0x01,
FIFO_READY = 0x02,
return host->req->error;
}
- dev_dbg(&msh->dev, "control %08x\n",
- readl(host->addr + HOST_CONTROL));
+ dev_dbg(&msh->dev, "control %08x\n", readl(host->addr + HOST_CONTROL));
dev_dbg(&msh->dev, "status %08x\n", readl(host->addr + INT_STATUS));
dev_dbg(&msh->dev, "hstatus %08x\n", readl(host->addr + STATUS));
ndelay(20);
}
dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n");
- return -EIO;
+ /* return -EIO; */
reset_next:
writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN
host_ctl = 7;
host_ctl |= HOST_CONTROL_POWER_EN
- | HOST_CONTROL_CLOCK_EN;
+ | HOST_CONTROL_CLOCK_EN
+ | HOST_CONTROL_HW_OC_P
+ | HOST_CONTROL_TDELAY_EN;
writel(host_ctl, host->addr + HOST_CONTROL);
writel(host->id ? PAD_PU_PD_ON_MS_SOCK1
break;
case MEMSTICK_INTERFACE:
host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT);
+ pci_read_config_dword(host->chip->pdev,
+ PCI_CTL_CLOCK_DLY_ADDR,
+ &clock_delay);
+ clock_delay &= host->id ? ~PCI_CTL_CLOCK_DLY_MASK_B
+ : ~PCI_CTL_CLOCK_DLY_MASK_A;
if (value == MEMSTICK_SERIAL) {
host_ctl &= ~HOST_CONTROL_FAST_CLK;
+ host_ctl &= ~HOST_CONTROL_REO;
host_ctl |= HOST_CONTROL_IF_SERIAL
<< HOST_CONTROL_IF_SHIFT;
host_ctl |= HOST_CONTROL_REI;
clock_ctl = CLOCK_CONTROL_40MHZ;
- clock_delay = 0;
} else if (value == MEMSTICK_PAR4) {
- host_ctl |= HOST_CONTROL_FAST_CLK;
+ host_ctl |= HOST_CONTROL_FAST_CLK | HOST_CONTROL_REO;
host_ctl |= HOST_CONTROL_IF_PAR4
<< HOST_CONTROL_IF_SHIFT;
host_ctl &= ~HOST_CONTROL_REI;
clock_ctl = CLOCK_CONTROL_40MHZ;
- clock_delay = 4;
+ clock_delay |= host->id ? (4 << 12) : (4 << 8);
} else if (value == MEMSTICK_PAR8) {
host_ctl |= HOST_CONTROL_FAST_CLK;
host_ctl |= HOST_CONTROL_IF_PAR8
<< HOST_CONTROL_IF_SHIFT;
- host_ctl &= ~HOST_CONTROL_REI;
- clock_ctl = CLOCK_CONTROL_60MHZ;
- clock_delay = 0;
+ host_ctl &= ~(HOST_CONTROL_REI | HOST_CONTROL_REO);
+ clock_ctl = CLOCK_CONTROL_50MHZ;
} else
return -EINVAL;
+
writel(host_ctl, host->addr + HOST_CONTROL);
writel(clock_ctl, host->addr + CLOCK_CONTROL);
- writel(clock_delay, host->addr + CLOCK_DELAY);
+ pci_write_config_dword(host->chip->pdev,
+ PCI_CTL_CLOCK_DLY_ADDR,
+ clock_delay);
break;
};
return 0;
config MFD_SM501_GPIO
bool "Export GPIO via GPIO layer"
- depends on MFD_SM501 && HAVE_GPIO_LIB
+ depends on MFD_SM501 && GPIOLIB
---help---
This option uses the gpio library layer to export the 64 GPIO
lines on the SM501. The platform data is used to supply the
config MFD_ASIC3
bool "Support for Compaq ASIC3"
- depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB && ARM
+ depends on GENERIC_HARDIRQS && GPIOLIB && ARM
---help---
This driver supports the ASIC3 multifunction chip found on many
PDAs (mainly iPAQ and HTC based ones)
struct asic3 *asic = platform_get_drvdata(pdev);
unsigned long clksel = 0;
unsigned int irq, irq_base;
- int map_size;
int ret;
ret = platform_get_irq(pdev, 0);
struct asic3 *asic;
struct resource *mem;
unsigned long clksel;
+ int map_size;
int ret = 0;
asic = kzalloc(sizeof(struct asic3), GFP_KERNEL);
return 0;
error_debugfs:
- remove_debugfs();
+ remove_debugfs();
return -ENOMEM;
}
static void __exit acer_wmi_exit(void)
{
remove_sysfs(acer_platform_device);
+ remove_debugfs();
platform_device_del(acer_platform_device);
platform_driver_unregister(&acer_platform_driver);
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6410"),
},
.callback = dmi_check_cb_s6410},
+ {
+ .ident = "FUJITSU LifeBook P8010",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P8010"),
+ },
+ .callback = dmi_check_cb_s6410},
{}
};
#define HPWMI_ALS_QUERY 0x3
#define HPWMI_DOCK_QUERY 0x4
#define HPWMI_WIRELESS_QUERY 0x5
+#define HPWMI_HOTKEY_QUERY 0xc
static int __init hp_wmi_bios_setup(struct platform_device *device);
static int __exit hp_wmi_bios_remove(struct platform_device *device);
struct key_entry {
char type; /* See KE_* below */
- u8 code;
+ u16 code;
u16 keycode;
};
{KE_SW, 0x01, SW_DOCK},
{KE_KEY, 0x02, KEY_BRIGHTNESSUP},
{KE_KEY, 0x03, KEY_BRIGHTNESSDOWN},
- {KE_KEY, 0x04, KEY_HELP},
+ {KE_KEY, 0x20e6, KEY_PROG1},
+ {KE_KEY, 0x2142, KEY_MEDIA},
+ {KE_KEY, 0x231b, KEY_HELP},
{KE_END, 0}
};
int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
if (wireless & 0x100)
- return 1;
+ return RFKILL_STATE_UNBLOCKED;
else
- return 0;
+ return RFKILL_STATE_SOFT_BLOCKED;
}
static int hp_wmi_bluetooth_state(void)
int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
if (wireless & 0x10000)
- return 1;
+ return RFKILL_STATE_UNBLOCKED;
else
- return 0;
+ return RFKILL_STATE_SOFT_BLOCKED;
}
static int hp_wmi_wwan_state(void)
int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
if (wireless & 0x1000000)
- return 1;
+ return RFKILL_STATE_UNBLOCKED;
else
- return 0;
+ return RFKILL_STATE_SOFT_BLOCKED;
}
static ssize_t show_display(struct device *dev, struct device_attribute *attr,
if (obj && obj->type == ACPI_TYPE_BUFFER && obj->buffer.length == 8) {
int eventcode = *((u8 *) obj->buffer.pointer);
+ if (eventcode == 0x4)
+ eventcode = hp_wmi_perform_query(HPWMI_HOTKEY_QUERY, 0,
+ 0);
key = hp_wmi_get_entry_by_scancode(eventcode);
if (key) {
switch (key->type) {
}
} else if (eventcode == 0x5) {
if (wifi_rfkill)
- wifi_rfkill->state = hp_wmi_wifi_state();
+ rfkill_force_state(wifi_rfkill,
+ hp_wmi_wifi_state());
if (bluetooth_rfkill)
- bluetooth_rfkill->state =
- hp_wmi_bluetooth_state();
+ rfkill_force_state(bluetooth_rfkill,
+ hp_wmi_bluetooth_state());
if (wwan_rfkill)
- wwan_rfkill->state = hp_wmi_wwan_state();
+ rfkill_force_state(wwan_rfkill,
+ hp_wmi_wwan_state());
} else
printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n",
eventcode);
static int __init hp_wmi_bios_setup(struct platform_device *device)
{
int err;
+ int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
err = device_create_file(&device->dev, &dev_attr_display);
if (err)
if (err)
goto add_sysfs_error;
- wifi_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN);
- wifi_rfkill->name = "hp-wifi";
- wifi_rfkill->state = hp_wmi_wifi_state();
- wifi_rfkill->toggle_radio = hp_wmi_wifi_set;
- wifi_rfkill->user_claim_unsupported = 1;
-
- bluetooth_rfkill = rfkill_allocate(&device->dev,
- RFKILL_TYPE_BLUETOOTH);
- bluetooth_rfkill->name = "hp-bluetooth";
- bluetooth_rfkill->state = hp_wmi_bluetooth_state();
- bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set;
- bluetooth_rfkill->user_claim_unsupported = 1;
-
- wwan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WIMAX);
- wwan_rfkill->name = "hp-wwan";
- wwan_rfkill->state = hp_wmi_wwan_state();
- wwan_rfkill->toggle_radio = hp_wmi_wwan_set;
- wwan_rfkill->user_claim_unsupported = 1;
-
- rfkill_register(wifi_rfkill);
- rfkill_register(bluetooth_rfkill);
- rfkill_register(wwan_rfkill);
+ if (wireless & 0x1) {
+ wifi_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN);
+ wifi_rfkill->name = "hp-wifi";
+ wifi_rfkill->state = hp_wmi_wifi_state();
+ wifi_rfkill->toggle_radio = hp_wmi_wifi_set;
+ wifi_rfkill->user_claim_unsupported = 1;
+ rfkill_register(wifi_rfkill);
+ }
+
+ if (wireless & 0x2) {
+ bluetooth_rfkill = rfkill_allocate(&device->dev,
+ RFKILL_TYPE_BLUETOOTH);
+ bluetooth_rfkill->name = "hp-bluetooth";
+ bluetooth_rfkill->state = hp_wmi_bluetooth_state();
+ bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set;
+ bluetooth_rfkill->user_claim_unsupported = 1;
+ rfkill_register(bluetooth_rfkill);
+ }
+
+ if (wireless & 0x4) {
+ wwan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WWAN);
+ wwan_rfkill->name = "hp-wwan";
+ wwan_rfkill->state = hp_wmi_wwan_state();
+ wwan_rfkill->toggle_radio = hp_wmi_wwan_set;
+ wwan_rfkill->user_claim_unsupported = 1;
+ rfkill_register(wwan_rfkill);
+ }
return 0;
add_sysfs_error:
{
cleanup_sysfs(device);
- rfkill_unregister(wifi_rfkill);
- rfkill_unregister(bluetooth_rfkill);
- rfkill_unregister(wwan_rfkill);
+ if (wifi_rfkill)
+ rfkill_unregister(wifi_rfkill);
+ if (bluetooth_rfkill)
+ rfkill_unregister(bluetooth_rfkill);
+ if (wwan_rfkill)
+ rfkill_unregister(wwan_rfkill);
return 0;
}
int order = get_order(sizeof(struct gru_state) *
GRU_CHIPLETS_PER_BLADE);
+ if (!IS_UV())
+ return;
+
for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++)
free_irq(IRQ_GRU + i, NULL);
.read = wan_read,
.write = wan_write,
.exit = wan_exit,
- .flags.experimental = 1,
};
/*************************************************************************
check_disk_change(inode->i_bdev);
ret = 0;
- if ((filp->f_mode & FMODE_WRITE) && md->read_only)
+ if ((filp->f_mode & FMODE_WRITE) && md->read_only) {
+ mmc_blk_put(md);
ret = -EROFS;
+ }
}
return ret;
static int __init mmc_blk_init(void)
{
- int res = -ENOMEM;
+ int res;
res = register_blkdev(MMC_BLOCK_MAJOR, "mmc");
if (res)
goto out;
- return mmc_register_driver(&mmc_driver);
+ res = mmc_register_driver(&mmc_driver);
+ if (res)
+ goto out2;
+ return 0;
+ out2:
+ unregister_blkdev(MMC_BLOCK_MAJOR, "mmc");
out:
return res;
}
};
-static struct mutex mmc_test_lock;
+static DEFINE_MUTEX(mmc_test_lock);
static void mmc_test_run(struct mmc_test_card *test, int testcase)
{
if ((card->type != MMC_TYPE_MMC) && (card->type != MMC_TYPE_SD))
return -ENODEV;
- mutex_init(&mmc_test_lock);
-
ret = device_create_file(&card->dev, &dev_attr_test);
if (ret)
return ret;
if (cpu_is_at91sam9260 () || cpu_is_at91sam9263())
if (host->total_length < 12)
host->total_length = 12;
- host->buffer = dma_alloc_coherent(NULL,
- host->total_length,
- &host->physical_address, GFP_KERNEL);
+
+ host->buffer = kmalloc(host->total_length, GFP_KERNEL);
+ if (!host->buffer) {
+ pr_debug("Can't alloc tx buffer\n");
+ cmd->error = -ENOMEM;
+ mmc_request_done(host->mmc, host->request);
+ return;
+ }
at91_mci_sg_to_dma(host, data);
+ host->physical_address = dma_map_single(NULL,
+ host->buffer, host->total_length,
+ DMA_TO_DEVICE);
+
pr_debug("Transmitting %d bytes\n", host->total_length);
at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
cmd->resp[3] = at91_mci_read(host, AT91_MCI_RSPR(3));
if (host->buffer) {
- dma_free_coherent(NULL, host->total_length, host->buffer, host->physical_address);
+ dma_unmap_single(NULL,
+ host->physical_address, host->total_length,
+ DMA_TO_DEVICE);
+ kfree(host->buffer);
host->buffer = NULL;
}
/* Grab a more or less consistent snapshot */
spin_lock_irq(&host->mmc->lock);
+ clk_enable(host->mck);
memcpy_fromio(buf, host->regs, MCI_REGS_SIZE);
+ clk_disable(host->mck);
spin_unlock_irq(&host->mmc->lock);
seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n",
atmci_show_status_reg(s, "SR", buf[MCI_SR / 4]);
atmci_show_status_reg(s, "IMR", buf[MCI_IMR / 4]);
+ kfree(buf);
+
return 0;
}
struct mmc_host *mmc;
struct dentry *root;
struct dentry *node;
- struct resource *res;
mmc = host->mmc;
root = mmc->debugfs_root;
if (!node)
goto err;
- res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
- node->d_inode->i_size = res->end - res->start + 1;
-
node = debugfs_create_file("req", S_IRUSR, root, host, &atmci_req_fops);
if (!node)
goto err;
host->present = !gpio_get_value(host->detect_pin);
}
}
+
+ if (!gpio_is_valid(host->detect_pin))
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
+
if (gpio_is_valid(host->wp_pin)) {
if (gpio_request(host->wp_pin, "mmc_wp")) {
dev_dbg(&mmc->class_dev, "no WP pin available\n");
#define STATUS_TO_TEXT(a) \
do { \
if (status & TMIO_STAT_##a) \
- printf(#a); \
+ printk(#a); \
} while (0)
-void debug_status(u32 status)
+void pr_debug_status(u32 status)
{
printk(KERN_DEBUG "status: %08x = ", status);
STATUS_TO_TEXT(CARD_REMOVE);
case MEMGETREGIONINFO:
{
- struct region_info_user ur;
+ uint32_t ur_idx;
+ struct mtd_erase_region_info *kr;
+ struct region_info_user *ur = (struct region_info_user *) argp;
- if (copy_from_user(&ur, argp, sizeof(struct region_info_user)))
+ if (get_user(ur_idx, &(ur->regionindex)))
return -EFAULT;
- if (ur.regionindex >= mtd->numeraseregions)
- return -EINVAL;
- if (copy_to_user(argp, &(mtd->eraseregions[ur.regionindex]),
- sizeof(struct mtd_erase_region_info)))
+ kr = &(mtd->eraseregions[ur_idx]);
+
+ if (put_user(kr->offset, &(ur->offset))
+ || put_user(kr->erasesize, &(ur->erasesize))
+ || put_user(kr->numblocks, &(ur->numblocks)))
return -EFAULT;
+
break;
}
void __iomem *ccr;
void __iomem *fcr;
- unsigned long fcr_phys;
+ unsigned long fcr_base;
unsigned int irq;
tmio_iowrite8(0x81, tmio->ccr + CCR_ICC);
/* (10h)BaseAddress 0x1000 spba.spba2 */
- tmio_iowrite16(tmio->fcr_phys, tmio->ccr + CCR_BASE);
- tmio_iowrite16(tmio->fcr_phys >> 16, tmio->ccr + CCR_BASE + 16);
+ tmio_iowrite16(tmio->fcr_base, tmio->ccr + CCR_BASE);
+ tmio_iowrite16(tmio->fcr_base >> 16, tmio->ccr + CCR_BASE + 2);
/* (04h)Command Register I/O spcmd */
tmio_iowrite8(0x02, tmio->ccr + CCR_COMMAND);
goto err_iomap_ccr;
}
- tmio->fcr_phys = (unsigned long)fcr->start;
+ tmio->fcr_base = fcr->start & 0xfffff;
tmio->fcr = ioremap(fcr->start, fcr->end - fcr->start + 1);
if (!tmio->fcr) {
retval = -EIO;
will be called smc-ultra32.
config BFIN_MAC
- tristate "Blackfin 527/536/537 on-chip mac support"
- depends on NET_ETHERNET && (BF527 || BF537 || BF536)
+ tristate "Blackfin on-chip MAC support"
+ depends on NET_ETHERNET && (BF526 || BF527 || BF536 || BF537)
select CRC32
select MII
select PHYLIB
select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
help
- This is the driver for blackfin on-chip mac device. Say Y if you want it
+ This is the driver for Blackfin on-chip mac device. Say Y if you want it
compiled into the kernel. This driver is also available as a module
( = code which can be inserted in and removed from the running kernel
whenever you want). The module will be called bfin_mac.
AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
- if (netif_running(netdev))
+ if (netif_running(netdev)) {
err = atl1e_request_irq(adapter);
if (err)
return err;
+ }
atl1e_reset_hw(&adapter->hw);
netdev->features = NETIF_F_HW_CSUM;
netdev->features |= NETIF_F_SG;
netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
- netdev->features |= NETIF_F_TSO;
netdev->features |= NETIF_F_LLTX;
/*
struct bnx2_irq {
irq_handler_t handler;
- u16 vector;
+ unsigned int vector;
u8 requested;
char name[16];
};
#define PAGES_PER_SGE_SHIFT 0
#define PAGES_PER_SGE (1 << PAGES_PER_SGE_SHIFT)
+#define BCM_RX_ETH_PAYLOAD_ALIGN 64
+
/* SGE ring related macros */
#define NUM_RX_SGE_PAGES 2
#define RX_SGE_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_sge))
u32 rx_csum;
u32 rx_offset;
- u32 rx_buf_use_size; /* useable size */
- u32 rx_buf_size; /* with alignment */
+ u32 rx_buf_size;
#define ETH_OVREHEAD (ETH_HLEN + 8) /* 8 for CRC + VLAN */
#define ETH_MIN_PACKET_SIZE 60
#define ETH_MAX_PACKET_SIZE 1500
#include "bnx2x.h"
#include "bnx2x_init.h"
-#define DRV_MODULE_VERSION "1.45.20"
-#define DRV_MODULE_RELDATE "2008/08/25"
+#define DRV_MODULE_VERSION "1.45.21"
+#define DRV_MODULE_RELDATE "2008/09/03"
#define BNX2X_BC_VER 0x040200
/* Time in jiffies before concluding the transmitter is hung */
if (unlikely(skb == NULL))
return -ENOMEM;
- mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_use_size,
+ mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_size,
PCI_DMA_FROMDEVICE);
if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
dev_kfree_skb(skb);
/* move empty skb from pool to prod and map it */
prod_rx_buf->skb = fp->tpa_pool[queue].skb;
mapping = pci_map_single(bp->pdev, fp->tpa_pool[queue].skb->data,
- bp->rx_buf_use_size, PCI_DMA_FROMDEVICE);
+ bp->rx_buf_size, PCI_DMA_FROMDEVICE);
pci_unmap_addr_set(prod_rx_buf, mapping, mapping);
/* move partial skb from cons to pool (don't unmap yet) */
pool entry status to BNX2X_TPA_STOP even if new skb allocation
fails. */
pci_unmap_single(bp->pdev, pci_unmap_addr(rx_buf, mapping),
- bp->rx_buf_use_size, PCI_DMA_FROMDEVICE);
+ bp->rx_buf_size, PCI_DMA_FROMDEVICE);
if (likely(new_skb)) {
/* fix ip xsum and give it to the stack */
} else if (bnx2x_alloc_rx_skb(bp, fp, bd_prod) == 0) {
pci_unmap_single(bp->pdev,
pci_unmap_addr(rx_buf, mapping),
- bp->rx_buf_use_size,
+ bp->rx_buf_size,
PCI_DMA_FROMDEVICE);
skb_reserve(skb, pad);
skb_put(skb, len);
if (fp->tpa_state[i] == BNX2X_TPA_START)
pci_unmap_single(bp->pdev,
pci_unmap_addr(rx_buf, mapping),
- bp->rx_buf_use_size,
+ bp->rx_buf_size,
PCI_DMA_FROMDEVICE);
dev_kfree_skb(skb);
u16 ring_prod, cqe_ring_prod;
int i, j;
- bp->rx_buf_use_size = bp->dev->mtu;
- bp->rx_buf_use_size += bp->rx_offset + ETH_OVREHEAD;
- bp->rx_buf_size = bp->rx_buf_use_size + 64;
+ bp->rx_buf_size = bp->dev->mtu;
+ bp->rx_buf_size += bp->rx_offset + ETH_OVREHEAD +
+ BCM_RX_ETH_PAYLOAD_ALIGN;
if (bp->flags & TPA_ENABLE_FLAG) {
DP(NETIF_MSG_IFUP,
- "rx_buf_use_size %d rx_buf_size %d effective_mtu %d\n",
- bp->rx_buf_use_size, bp->rx_buf_size,
- bp->dev->mtu + ETH_OVREHEAD);
+ "rx_buf_size %d effective_mtu %d\n",
+ bp->rx_buf_size, bp->dev->mtu + ETH_OVREHEAD);
for_each_queue(bp, j) {
struct bnx2x_fastpath *fp = &bp->fp[j];
context->ustorm_st_context.common.status_block_id = sb_id;
context->ustorm_st_context.common.flags =
USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_MC_ALIGNMENT;
- context->ustorm_st_context.common.mc_alignment_size = 64;
+ context->ustorm_st_context.common.mc_alignment_size =
+ BCM_RX_ETH_PAYLOAD_ALIGN;
context->ustorm_st_context.common.bd_buff_size =
- bp->rx_buf_use_size;
+ bp->rx_buf_size;
context->ustorm_st_context.common.bd_page_base_hi =
U64_HI(fp->rx_desc_mapping);
context->ustorm_st_context.common.bd_page_base_lo =
}
/* Init CQ ring mapping and aggregation size */
- max_agg_size = min((u32)(bp->rx_buf_use_size +
+ max_agg_size = min((u32)(bp->rx_buf_size +
8*BCM_PAGE_SIZE*PAGES_PER_SGE),
(u32)0xffff);
for_each_queue(bp, i) {
pci_unmap_single(bp->pdev,
pci_unmap_addr(rx_buf, mapping),
- bp->rx_buf_use_size,
+ bp->rx_buf_size,
PCI_DMA_FROMDEVICE);
rx_buf->skb = NULL;
if ((le16_to_cpu(rfd->command) & cb_el) &&
(RU_RUNNING == nic->ru_running))
- if (readb(&nic->csr->scb.status) & rus_no_res)
+ if (ioread8(&nic->csr->scb.status) & rus_no_res)
nic->ru_running = RU_SUSPENDED;
return -ENODATA;
}
if ((le16_to_cpu(rfd->command) & cb_el) &&
(RU_RUNNING == nic->ru_running)) {
- if (readb(&nic->csr->scb.status) & rus_no_res)
+ if (ioread8(&nic->csr->scb.status) & rus_no_res)
nic->ru_running = RU_SUSPENDED;
}
nic->flags |= wol_magic;
/* ack any pending wake events, disable PME */
- err = pci_enable_wake(pdev, 0, 0);
- if (err)
- DPRINTK(PROBE, ERR, "Error clearing wake event\n");
+ pci_pme_active(pdev, false);
strcpy(netdev->name, "eth%d");
if((err = register_netdev(netdev))) {
static u8 e1000_calculate_mng_checksum(char *buffer, u32 length);
static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex);
static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
/* IGP cable length table */
static const
83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124,
104, 109, 114, 118, 121, 124};
+static DEFINE_SPINLOCK(e1000_eeprom_lock);
+
/******************************************************************************
* Set the phy type member in the hw struct.
*
* words - number of words to read
*****************************************************************************/
s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ s32 ret;
+ spin_lock(&e1000_eeprom_lock);
+ ret = e1000_do_read_eeprom(hw, offset, words, data);
+ spin_unlock(&e1000_eeprom_lock);
+ return ret;
+}
+
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
u32 i = 0;
* EEPROM will most likely contain an invalid checksum.
*****************************************************************************/
s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ s32 ret;
+ spin_lock(&e1000_eeprom_lock);
+ ret = e1000_do_write_eeprom(hw, offset, words, data);
+ spin_unlock(&e1000_eeprom_lock);
+ return ret;
+}
+
+
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
{
struct e1000_eeprom_info *eeprom = &hw->eeprom;
s32 status = 0;
struct net_device *netdev;
struct pci_dev *pdev;
struct net_device_stats net_stats;
- spinlock_t stats_lock; /* prevent concurrent stats updates */
/* structs defined in e1000_hw.h */
struct e1000_hw hw;
unsigned long led_status;
unsigned int flags;
+ struct work_struct downshift_task;
+ struct work_struct update_phy_task;
};
struct e1000_info {
#define FLAG_HAS_CTRLEXT_ON_LOAD (1 << 5)
#define FLAG_HAS_SWSM_ON_LOAD (1 << 6)
#define FLAG_HAS_JUMBO_FRAMES (1 << 7)
+#define FLAG_READ_ONLY_NVM (1 << 8)
#define FLAG_IS_ICH (1 << 9)
#define FLAG_HAS_SMART_POWER_DOWN (1 << 11)
#define FLAG_IS_QUAD_PORT_A (1 << 12)
extern bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
extern void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
+extern void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw);
extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
bool state);
extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
regs_buff[11] = er32(TIDV);
regs_buff[12] = adapter->hw.phy.type; /* PHY type (IGP=1, M88=0) */
+
+ /* ethtool doesn't use anything past this point, so all this
+ * code is likely legacy junk for apps that may or may not
+ * exist */
if (hw->phy.type == e1000_phy_m88) {
e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
regs_buff[13] = (u32)phy_data; /* cable length */
regs_buff[22] = adapter->phy_stats.receive_errors;
regs_buff[23] = regs_buff[13]; /* mdix mode */
}
- regs_buff[21] = adapter->phy_stats.idle_errors; /* phy idle errors */
+ regs_buff[21] = 0; /* was idle_errors */
e1e_rphy(hw, PHY_1000T_STATUS, &phy_data);
regs_buff[24] = (u32)phy_data; /* phy local receiver status */
regs_buff[25] = regs_buff[24]; /* phy remote receiver status */
if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16)))
return -EFAULT;
+ if (adapter->flags & FLAG_READ_ONLY_NVM)
+ return -EINVAL;
+
max_len = hw->nvm.word_size * 2;
first_word = eeprom->offset >> 1;
#define ICH_FLASH_HSFCTL 0x0006
#define ICH_FLASH_FADDR 0x0008
#define ICH_FLASH_FDATA0 0x0010
+#define ICH_FLASH_PR0 0x0074
#define ICH_FLASH_READ_COMMAND_TIMEOUT 500
#define ICH_FLASH_WRITE_COMMAND_TIMEOUT 500
u16 regval;
};
+/* ICH Flash Protected Region */
+union ich8_flash_protected_range {
+ struct ich8_pr {
+ u32 base:13; /* 0:12 Protected Range Base */
+ u32 reserved1:2; /* 13:14 Reserved */
+ u32 rpe:1; /* 15 Read Protection Enable */
+ u32 limit:13; /* 16:28 Protected Range Limit */
+ u32 reserved2:2; /* 29:30 Reserved */
+ u32 wpe:1; /* 31 Write Protection Enable */
+ } range;
+ u32 regval;
+};
+
static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw);
static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw);
static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw);
return 0;
}
+static DEFINE_MUTEX(nvm_mutex);
+static pid_t nvm_owner = -1;
+
/**
* e1000_acquire_swflag_ich8lan - Acquire software control flag
* @hw: pointer to the HW structure
u32 extcnf_ctrl;
u32 timeout = PHY_CFG_TIMEOUT;
+ might_sleep();
+
+ if (!mutex_trylock(&nvm_mutex)) {
+ WARN(1, KERN_ERR "e1000e mutex contention. Owned by pid %d\n",
+ nvm_owner);
+ mutex_lock(&nvm_mutex);
+ }
+ nvm_owner = current->pid;
+
while (timeout) {
extcnf_ctrl = er32(EXTCNF_CTRL);
extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
if (!timeout) {
hw_dbg(hw, "FW or HW has locked the resource for too long.\n");
+ nvm_owner = -1;
+ mutex_unlock(&nvm_mutex);
return -E1000_ERR_CONFIG;
}
extcnf_ctrl = er32(EXTCNF_CTRL);
extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
ew32(EXTCNF_CTRL, extcnf_ctrl);
+
+ nvm_owner = -1;
+ mutex_unlock(&nvm_mutex);
}
/**
* programming failed.
*/
if (ret_val) {
+ /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
hw_dbg(hw, "Flash commit failed.\n");
e1000_release_swflag_ich8lan(hw);
return ret_val;
return e1000e_validate_nvm_checksum_generic(hw);
}
+/**
+ * e1000e_write_protect_nvm_ich8lan - Make the NVM read-only
+ * @hw: pointer to the HW structure
+ *
+ * To prevent malicious write/erase of the NVM, set it to be read-only
+ * so that the hardware ignores all write/erase cycles of the NVM via
+ * the flash control registers. The shadow-ram copy of the NVM will
+ * still be updated, however any updates to this copy will not stick
+ * across driver reloads.
+ **/
+void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw)
+{
+ union ich8_flash_protected_range pr0;
+ union ich8_hws_flash_status hsfsts;
+ u32 gfpreg;
+ s32 ret_val;
+
+ ret_val = e1000_acquire_swflag_ich8lan(hw);
+ if (ret_val)
+ return;
+
+ gfpreg = er32flash(ICH_FLASH_GFPREG);
+
+ /* Write-protect GbE Sector of NVM */
+ pr0.regval = er32flash(ICH_FLASH_PR0);
+ pr0.range.base = gfpreg & FLASH_GFPREG_BASE_MASK;
+ pr0.range.limit = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK);
+ pr0.range.wpe = true;
+ ew32flash(ICH_FLASH_PR0, pr0.regval);
+
+ /*
+ * Lock down a subset of GbE Flash Control Registers, e.g.
+ * PR0 to prevent the write-protection from being lifted.
+ * Once FLOCKDN is set, the registers protected by it cannot
+ * be written until FLOCKDN is cleared by a hardware reset.
+ */
+ hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+ hsfsts.hsf_status.flockdn = true;
+ ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval);
+
+ e1000_release_swflag_ich8lan(hw);
+}
+
/**
* e1000_write_flash_data_ich8lan - Writes bytes to the NVM
* @hw: pointer to the HW structure
ew32(CTRL, (ctrl | E1000_CTRL_RST));
msleep(20);
+ /* release the swflag because it is not reset by hardware reset */
+ e1000_release_swflag_ich8lan(hw);
+
ret_val = e1000e_get_auto_rd_done(hw);
if (ret_val) {
/*
#include "e1000.h"
-#define DRV_VERSION "0.3.3.3-k2"
+#define DRV_VERSION "0.3.3.3-k6"
char e1000e_driver_name[] = "e1000e";
const char e1000e_driver_version[] = DRV_VERSION;
writel(0, adapter->hw.hw_addr + rx_ring->tail);
}
+static void e1000e_downshift_workaround(struct work_struct *work)
+{
+ struct e1000_adapter *adapter = container_of(work,
+ struct e1000_adapter, downshift_task);
+
+ e1000e_gig_downshift_workaround_ich8lan(&adapter->hw);
+}
+
/**
* e1000_intr_msi - Interrupt Handler
* @irq: interrupt number
*/
if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
(!(er32(STATUS) & E1000_STATUS_LU)))
- e1000e_gig_downshift_workaround_ich8lan(hw);
+ schedule_work(&adapter->downshift_task);
/*
* 80003ES2LAN workaround-- For packet buffer work-around on
*/
if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
(!(er32(STATUS) & E1000_STATUS_LU)))
- e1000e_gig_downshift_workaround_ich8lan(hw);
+ schedule_work(&adapter->downshift_task);
/*
* 80003ES2LAN workaround--
/* Explicitly disable IRQ since the NIC can be in any state. */
e1000_irq_disable(adapter);
- spin_lock_init(&adapter->stats_lock);
-
set_bit(__E1000_DOWN, &adapter->state);
return 0;
return 0;
}
+/**
+ * e1000e_update_phy_task - work thread to update phy
+ * @work: pointer to our work struct
+ *
+ * this worker thread exists because we must acquire a
+ * semaphore to read the phy, which we could msleep while
+ * waiting for it, and we can't msleep in a timer.
+ **/
+static void e1000e_update_phy_task(struct work_struct *work)
+{
+ struct e1000_adapter *adapter = container_of(work,
+ struct e1000_adapter, update_phy_task);
+ e1000_get_phy_info(&adapter->hw);
+}
+
/*
* Need to wait a few seconds after link up to get diagnostic information from
* the phy
static void e1000_update_phy_info(unsigned long data)
{
struct e1000_adapter *adapter = (struct e1000_adapter *) data;
- e1000_get_phy_info(&adapter->hw);
+ schedule_work(&adapter->update_phy_task);
}
/**
{
struct e1000_hw *hw = &adapter->hw;
struct pci_dev *pdev = adapter->pdev;
- unsigned long irq_flags;
- u16 phy_tmp;
-
-#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
/*
* Prevent stats update while adapter is being reset, or if the pci
if (pci_channel_offline(pdev))
return;
- spin_lock_irqsave(&adapter->stats_lock, irq_flags);
-
- /*
- * these counters are modified from e1000_adjust_tbi_stats,
- * called from the interrupt context, so they must only
- * be written while holding adapter->stats_lock
- */
-
adapter->stats.crcerrs += er32(CRCERRS);
adapter->stats.gprc += er32(GPRC);
adapter->stats.gorc += er32(GORCL);
/* Tx Dropped needs to be maintained elsewhere */
- /* Phy Stats */
- if (hw->phy.media_type == e1000_media_type_copper) {
- if ((adapter->link_speed == SPEED_1000) &&
- (!e1e_rphy(hw, PHY_1000T_STATUS, &phy_tmp))) {
- phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
- adapter->phy_stats.idle_errors += phy_tmp;
- }
- }
-
/* Management Stats */
adapter->stats.mgptc += er32(MGTPTC);
adapter->stats.mgprc += er32(MGTPRC);
adapter->stats.mgpdc += er32(MGTPDC);
-
- spin_unlock_irqrestore(&adapter->stats_lock, irq_flags);
}
/**
struct e1000_hw *hw = &adapter->hw;
struct e1000_phy_regs *phy = &adapter->phy_regs;
int ret_val;
- unsigned long irq_flags;
-
-
- spin_lock_irqsave(&adapter->stats_lock, irq_flags);
if ((er32(STATUS) & E1000_STATUS_LU) &&
(adapter->hw.phy.media_type == e1000_media_type_copper)) {
phy->stat1000 = 0;
phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF);
}
-
- spin_unlock_irqrestore(&adapter->stats_lock, irq_flags);
}
static void e1000_print_link_info(struct e1000_adapter *adapter)
adapter->bd_number = cards_found++;
+ e1000e_check_options(adapter);
+
/* setup adapter struct */
err = e1000_sw_init(adapter);
if (err)
if (err)
goto err_hw_init;
+ if ((adapter->flags & FLAG_IS_ICH) &&
+ (adapter->flags & FLAG_READ_ONLY_NVM))
+ e1000e_write_protect_nvm_ich8lan(&adapter->hw);
+
hw->mac.ops.get_bus_info(&adapter->hw);
adapter->hw.phy.autoneg_wait_to_complete = 0;
INIT_WORK(&adapter->reset_task, e1000_reset_task);
INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
-
- e1000e_check_options(adapter);
+ INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
+ INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
/* Initialize link parameters. User can change them with ethtool */
adapter->hw.mac.autoneg = 1;
*/
E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
+/*
+ * Write Protect NVM
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
+
struct e1000_option {
enum { enable_option, range_option, list_option } type;
const char *name;
opt.def);
}
}
+ { /* Write-protect NVM */
+ const struct e1000_option opt = {
+ .type = enable_option,
+ .name = "Write-protect NVM",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (adapter->flags & FLAG_IS_ICH) {
+ if (num_WriteProtectNVM > bd) {
+ unsigned int write_protect_nvm = WriteProtectNVM[bd];
+ e1000_validate_option(&write_protect_nvm, &opt,
+ adapter);
+ if (write_protect_nvm)
+ adapter->flags |= FLAG_READ_ONLY_NVM;
+ } else {
+ if (opt.def)
+ adapter->flags |= FLAG_READ_ONLY_NVM;
+ }
+ }
+ }
}
if (id->driver_data & DEV_HAS_CHECKSUM) {
np->rx_csum = 1;
np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK;
- dev->features |= NETIF_F_HW_CSUM | NETIF_F_SG;
+ dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
dev->features |= NETIF_F_TSO;
}
dev->dev_addr[4] = (np->orig_mac[0] >> 8) & 0xff;
dev->dev_addr[5] = (np->orig_mac[0] >> 0) & 0xff;
writel(txreg|NVREG_TRANSMITPOLL_MAC_ADDR_REV, base + NvRegTransmitPoll);
+ printk(KERN_DEBUG "nv_probe: set workaround bit for reversed mac addr\n");
}
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
dev_printk(KERN_INFO, &pci_dev->dev, "%s%s%s%s%s%s%s%s%s%sdesc-v%u\n",
dev->features & NETIF_F_HIGHDMA ? "highdma " : "",
- dev->features & (NETIF_F_HW_CSUM | NETIF_F_SG) ?
+ dev->features & (NETIF_F_IP_CSUM | NETIF_F_SG) ?
"csum " : "",
dev->features & (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX) ?
"vlan " : "",
}
}
-static void __devexit nv_remove(struct pci_dev *pci_dev)
+static void nv_restore_mac_addr(struct pci_dev *pci_dev)
{
struct net_device *dev = pci_get_drvdata(pci_dev);
struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
- unregister_netdev(dev);
-
/* special op: write back the misordered MAC address - otherwise
* the next nv_probe would see a wrong address.
*/
writel(np->orig_mac[1], base + NvRegMacAddrB);
writel(readl(base + NvRegTransmitPoll) & ~NVREG_TRANSMITPOLL_MAC_ADDR_REV,
base + NvRegTransmitPoll);
+}
+
+static void __devexit nv_remove(struct pci_dev *pci_dev)
+{
+ struct net_device *dev = pci_get_drvdata(pci_dev);
+
+ unregister_netdev(dev);
+
+ nv_restore_mac_addr(pci_dev);
/* restore any phy related changes */
nv_restore_phy(dev);
if (netif_running(dev))
nv_close(dev);
- pci_enable_wake(pdev, PCI_D3hot, np->wolenabled);
- pci_enable_wake(pdev, PCI_D3cold, np->wolenabled);
+ nv_restore_mac_addr(pdev);
+
pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
+ if (system_state == SYSTEM_POWER_OFF) {
+ if (pci_enable_wake(pdev, PCI_D3cold, np->wolenabled))
+ pci_enable_wake(pdev, PCI_D3hot, np->wolenabled);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
}
#else
#define nv_suspend NULL
int r;
int err;
+ /* to initialize the fep->cur_rx,... */
+ /* not doing this, will cause a crash in fs_enet_rx_napi */
+ fs_init_bds(fep->ndev);
+
if (fep->fpi->use_napi)
napi_enable(&fep->napi);
.compatible = "fsl,cpm1-scc-enet",
.data = (void *)&fs_scc_ops,
},
+ {
+ .compatible = "fsl,cpm2-scc-enet",
+ .data = (void *)&fs_scc_ops,
+ },
#endif
#ifdef CONFIG_FS_ENET_HAS_FCC
{
#include "fs_enet.h"
/*************************************************/
-
#if defined(CONFIG_CPM1)
/* for a 8xx __raw_xxx's are sufficient */
#define __fs_out32(addr, x) __raw_writel(x, addr)
#define __fs_out16(addr, x) out_be16(addr, x)
#define __fs_in32(addr) in_be32(addr)
#define __fs_in16(addr) in_be16(addr)
+#define __fs_out8(addr, x) out_8(addr, x)
+#define __fs_in8(addr) in_8(addr)
#endif
/* write, read, set bits, clear bits */
/* Initialize function code registers for big-endian.
*/
+#ifndef CONFIG_NOT_COHERENT_CACHE
+ W8(ep, sen_genscc.scc_rfcr, SCC_EB | SCC_GBL);
+ W8(ep, sen_genscc.scc_tfcr, SCC_EB | SCC_GBL);
+#else
W8(ep, sen_genscc.scc_rfcr, SCC_EB);
W8(ep, sen_genscc.scc_tfcr, SCC_EB);
+#endif
/* Set maximum bytes per receive buffer.
* This appears to be an Ethernet frame size, not the buffer
static int gfar_enet_open(struct net_device *dev);
static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static void gfar_reset_task(struct work_struct *work);
static void gfar_timeout(struct net_device *dev);
static int gfar_close(struct net_device *dev);
struct sk_buff *gfar_new_skb(struct net_device *dev);
spin_lock_init(&priv->txlock);
spin_lock_init(&priv->rxlock);
spin_lock_init(&priv->bflock);
+ INIT_WORK(&priv->reset_task, gfar_reset_task);
platform_set_drvdata(pdev, dev);
napi_disable(&priv->napi);
+ cancel_work_sync(&priv->reset_task);
stop_gfar(dev);
/* Disconnect from the PHY */
return 0;
}
-/* gfar_timeout gets called when a packet has not been
+/* gfar_reset_task gets scheduled when a packet has not been
* transmitted after a set amount of time.
* For now, assume that clearing out all the structures, and
- * starting over will fix the problem. */
-static void gfar_timeout(struct net_device *dev)
+ * starting over will fix the problem.
+ */
+static void gfar_reset_task(struct work_struct *work)
{
- dev->stats.tx_errors++;
+ struct gfar_private *priv = container_of(work, struct gfar_private,
+ reset_task);
+ struct net_device *dev = priv->dev;
if (dev->flags & IFF_UP) {
stop_gfar(dev);
netif_tx_schedule_all(dev);
}
+static void gfar_timeout(struct net_device *dev)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+
+ dev->stats.tx_errors++;
+ schedule_work(&priv->reset_task);
+}
+
/* Interrupt Handler for Transmit complete */
static int gfar_clean_tx_ring(struct net_device *dev)
{
uint32_t msg_enable;
+ struct work_struct reset_task;
/* Network Statistics */
struct gfar_extra_stats extra_stats;
};
#ifndef MODULE
struct net_device * __init hp_plus_probe(int unit)
{
- struct net_device *dev = alloc_ei_netdev();
+ struct net_device *dev = alloc_eip_netdev();
int err;
if (!dev)
int option_reg;
int retval;
- if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))) {
+ if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) {
return retval;
}
/* Select the operational page. */
outw(Perf_Page, ioaddr + HP_PAGING);
- ei_open(dev);
+ eip_open(dev);
return 0;
}
int option_reg = inw(ioaddr + HPP_OPTION);
free_irq(dev->irq, dev);
- ei_close(dev);
+ eip_close(dev);
outw((option_reg & ~EnableIRQ) | MemDisable | NICReset | ChipReset,
ioaddr + HPP_OPTION);
if (emac_phy_gpcs(dev->phy.mode))
emac_mii_reset_phy(&dev->phy);
- /* Required for Pause packet support in EMAC */
- dev_mc_add(ndev, default_mcast_addr, sizeof(default_mcast_addr), 1);
-
return 0;
}
} else
netif_carrier_on(dev->ndev);
+ /* Required for Pause packet support in EMAC */
+ dev_mc_add(ndev, default_mcast_addr, sizeof(default_mcast_addr), 1);
+
emac_configure(dev);
mal_poll_add(dev->mal, &dev->commac);
mal_enable_tx_channel(dev->mal, dev->mal_tx_chan);
unsigned long data_dma_addr;
desc.fields.flags_len = IBMVETH_BUF_VALID | skb->len;
- data_dma_addr = dma_map_single(&adapter->vdev->dev, skb->data,
- skb->len, DMA_TO_DEVICE);
if (skb->ip_summed == CHECKSUM_PARTIAL &&
ip_hdr(skb)->protocol != IPPROTO_TCP && skb_checksum_help(skb)) {
buf[1] = 0;
}
+ data_dma_addr = dma_map_single(&adapter->vdev->dev, skb->data,
+ skb->len, DMA_TO_DEVICE);
if (dma_mapping_error(&adapter->vdev->dev, data_dma_addr)) {
if (!firmware_has_feature(FW_FEATURE_CMO))
ibmveth_error_printk("tx: unable to map xmit buffer\n");
desc.fields.address = adapter->bounce_buffer_dma;
tx_map_failed++;
used_bounce = 1;
+ wmb();
} else
desc.fields.address = data_dma_addr;
case E1000_DEV_ID_82576:
case E1000_DEV_ID_82576_FIBER:
case E1000_DEV_ID_82576_SERDES:
- case E1000_DEV_ID_82576_QUAD_COPPER:
mac->type = e1000_82576;
break;
default:
#define E1000_DEV_ID_82576 0x10C9
#define E1000_DEV_ID_82576_FIBER 0x10E6
#define E1000_DEV_ID_82576_SERDES 0x10E7
-#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8
#define E1000_DEV_ID_82575EB_COPPER 0x10A7
#define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9
#define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6
regs_buff[12] = rd32(E1000_EECD);
/* Interrupt */
- regs_buff[13] = rd32(E1000_EICR);
+ /* Reading EICS for EICR because they read the
+ * same but EICS does not clear on read */
+ regs_buff[13] = rd32(E1000_EICS);
regs_buff[14] = rd32(E1000_EICS);
regs_buff[15] = rd32(E1000_EIMS);
regs_buff[16] = rd32(E1000_EIMC);
regs_buff[17] = rd32(E1000_EIAC);
regs_buff[18] = rd32(E1000_EIAM);
- regs_buff[19] = rd32(E1000_ICR);
+ /* Reading ICS for ICR because they read the
+ * same but ICS does not clear on read */
+ regs_buff[19] = rd32(E1000_ICS);
regs_buff[20] = rd32(E1000_ICS);
regs_buff[21] = rd32(E1000_IMS);
regs_buff[22] = rd32(E1000_IMC);
/* return success for non excluded adapter ports */
retval = 0;
break;
- case E1000_DEV_ID_82576_QUAD_COPPER:
- /* quad port adapters only support WoL on port A */
- if (!(adapter->flags & IGB_FLAG_QUAD_PORT_A)) {
- wol->supported = 0;
- break;
- }
- /* return success for non excluded adapter ports */
- retval = 0;
- break;
default:
/* dual port cards only support WoL on port A from now on
* unless it was enabled in the eeprom for port B
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 },
adapter->msix_entries,
numvecs);
if (err == 0)
- return;
+ goto out;
igb_reset_interrupt_capability(adapter);
adapter->num_tx_queues = 1;
if (!pci_enable_msi(adapter->pdev))
adapter->flags |= IGB_FLAG_HAS_MSI;
-
+out:
/* Notify the stack of the (possibly) reduced Tx Queue count. */
adapter->netdev->real_num_tx_queues = adapter->num_tx_queues;
return;
if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1)
adapter->eeprom_wol = 0;
break;
- case E1000_DEV_ID_82576_QUAD_COPPER:
- /* if quad port adapter, disable WoL on all but port A */
- if (global_quad_port_a != 0)
- adapter->eeprom_wol = 0;
- else
- adapter->flags |= IGB_FLAG_QUAD_PORT_A;
- /* Reset for multiple quad port adapters */
- if (++global_quad_port_a == 4)
- global_quad_port_a = 0;
- break;
}
/* initialize the wol settings based on the eeprom settings */
struct igb_ring *tx_ring = adapter->tx_ring;
struct e1000_mac_info *mac = &adapter->hw.mac;
u32 link;
+ u32 eics = 0;
s32 ret_val;
+ int i;
if ((netif_carrier_ok(netdev)) &&
(rd32(E1000_STATUS) & E1000_STATUS_LU))
}
/* Cause software interrupt to ensure rx ring is cleaned */
- wr32(E1000_ICS, E1000_ICS_RXDMT0);
+ if (adapter->msix_entries) {
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ eics |= adapter->rx_ring[i].eims_value;
+ wr32(E1000_EICS, eics);
+ } else {
+ wr32(E1000_ICS, E1000_ICS_RXDMT0);
+ }
/* Force detection of hung controller every watchdog period */
tx_ring->detect_tx_hung = true;
struct ixgbe_hw *hw = &adapter->hw;
struct dev_mc_list *mc_ptr;
u8 *mta_list;
- u32 fctrl;
+ u32 fctrl, vlnctrl;
int i;
/* Check for Promiscuous and All Multicast modes */
fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+ vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
if (netdev->flags & IFF_PROMISC) {
fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
- fctrl &= ~IXGBE_VLNCTRL_VFE;
+ vlnctrl &= ~IXGBE_VLNCTRL_VFE;
} else {
if (netdev->flags & IFF_ALLMULTI) {
fctrl |= IXGBE_FCTRL_MPE;
} else {
fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
}
- fctrl |= IXGBE_VLNCTRL_VFE;
+ vlnctrl |= IXGBE_VLNCTRL_VFE;
}
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
+ IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
if (netdev->mc_count) {
mta_list = kcalloc(netdev->mc_count, ETH_ALEN, GFP_ATOMIC);
int err = 0;
int vector, v_budget;
+ /*
+ * Set the default interrupt throttle rate.
+ */
+ adapter->rx_eitr = (1000000 / IXGBE_DEFAULT_ITR_RX_USECS);
+ adapter->tx_eitr = (1000000 / IXGBE_DEFAULT_ITR_TX_USECS);
+
/*
* It's easy to be greedy for MSI-X vectors, but it really
* doesn't do us much good if we have a lot more vectors
#define MLX4_MPT_FLAG_PHYSICAL (1 << 9)
#define MLX4_MPT_FLAG_REGION (1 << 8)
-#define MLX4_MPT_PD_FLAG_FAST_REG (1 << 26)
+#define MLX4_MPT_PD_FLAG_FAST_REG (1 << 27)
+#define MLX4_MPT_PD_FLAG_RAE (1 << 28)
#define MLX4_MPT_PD_FLAG_EN_INV (3 << 24)
-#define MLX4_MTT_FLAG_PRESENT 1
-
#define MLX4_MPT_STATUS_SW 0xF0
#define MLX4_MPT_STATUS_HW 0x00
if (mr->mtt.order >= 0 && mr->mtt.page_shift == 0) {
/* fast register MR in free state */
mpt_entry->flags |= cpu_to_be32(MLX4_MPT_FLAG_FREE);
- mpt_entry->pd_flags |= cpu_to_be32(MLX4_MPT_PD_FLAG_FAST_REG);
+ mpt_entry->pd_flags |= cpu_to_be32(MLX4_MPT_PD_FLAG_FAST_REG |
+ MLX4_MPT_PD_FLAG_RAE);
+ mpt_entry->mtt_sz = cpu_to_be32((1 << mr->mtt.order) *
+ MLX4_MTT_ENTRY_PER_SEG);
} else {
mpt_entry->flags |= cpu_to_be32(MLX4_MPT_FLAG_SW_OWNS);
}
#include <asm/system.h>
static char mv643xx_eth_driver_name[] = "mv643xx_eth";
-static char mv643xx_eth_driver_version[] = "1.2";
+static char mv643xx_eth_driver_version[] = "1.3";
#define MV643XX_ETH_CHECKSUM_OFFLOAD_TX
#define MV643XX_ETH_NAPI
/*
* Reserve 2+14 bytes for an ethernet header (the
* hardware automatically prepends 2 bytes of dummy
- * data to each received packet), 4 bytes for a VLAN
- * header, and 4 bytes for the trailing FCS -- 24
- * bytes total.
+ * data to each received packet), 16 bytes for up to
+ * four VLAN tags, and 4 bytes for the trailing FCS
+ * -- 36 bytes total.
*/
- skb_size = mp->dev->mtu + 24;
+ skb_size = mp->dev->mtu + 36;
+
+ /*
+ * Make sure that the skb size is a multiple of 8
+ * bytes, as the lower three bits of the receive
+ * descriptor's buffer size field are ignored by
+ * the hardware.
+ */
+ skb_size = (skb_size + 7) & ~7;
skb = dev_alloc_skb(skb_size + dma_get_cache_alignment() - 1);
if (skb == NULL)
skb_reserve(skb, 2);
}
- if (rxq->rx_desc_count != rxq->rx_ring_size) {
- rxq->rx_oom.expires = jiffies + (HZ / 10);
- add_timer(&rxq->rx_oom);
- }
+ if (rxq->rx_desc_count != rxq->rx_ring_size)
+ mod_timer(&rxq->rx_oom, jiffies + (HZ / 10));
spin_unlock_irqrestore(&mp->lock, flags);
}
int rx;
rx = 0;
- while (rx < budget) {
+ while (rx < budget && rxq->rx_desc_count) {
struct rx_desc *rx_desc;
unsigned int cmd_sts;
struct sk_buff *skb;
spin_unlock_irqrestore(&mp->lock, flags);
dma_unmap_single(NULL, rx_desc->buf_ptr + 2,
- mp->dev->mtu + 24, DMA_FROM_DEVICE);
+ rx_desc->buf_size, DMA_FROM_DEVICE);
rxq->rx_desc_count--;
rx++;
txq_reclaim(mp->txq + i, 0);
if (netif_carrier_ok(mp->dev)) {
- spin_lock(&mp->lock);
+ spin_lock_irq(&mp->lock);
__txq_maybe_wake(mp->txq + mp->txq_primary);
- spin_unlock(&mp->lock);
+ spin_unlock_irq(&mp->lock);
}
}
#endif
if (rx < budget) {
netif_rx_complete(mp->dev, napi);
- wrl(mp, INT_CAUSE(mp->port_num), 0);
- wrl(mp, INT_CAUSE_EXT(mp->port_num), 0);
wrl(mp, INT_MASK(mp->port_num), INT_TX_END | INT_RX | INT_EXT);
}
*/
#ifdef MV643XX_ETH_NAPI
if (int_cause & INT_RX) {
+ wrl(mp, INT_CAUSE(mp->port_num), ~(int_cause & INT_RX));
wrl(mp, INT_MASK(mp->port_num), 0x00000000);
rdl(mp, INT_MASK(mp->port_num));
#include "myri10ge_mcp.h"
#include "myri10ge_mcp_gen_header.h"
-#define MYRI10GE_VERSION_STR "1.3.99-1.347"
+#define MYRI10GE_VERSION_STR "1.4.3-1.358"
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
MODULE_AUTHOR("Maintainer: help@myri.com");
int i, pos;
struct pci_dev *pdev;
- pdev = pci_get_device(0x1166, 0x0140, NULL);
- if (pdev) {
- pci_dev_put(pdev);
- adapter->hw_read_wx(adapter,
- NETXEN_PCIE_REG(PCIE_TGT_SPLIT_CHICKEN), &chicken, 4);
- chicken |= 0x4000;
- adapter->hw_write_wx(adapter,
- NETXEN_PCIE_REG(PCIE_TGT_SPLIT_CHICKEN), &chicken, 4);
- }
-
pdev = adapter->pdev;
adapter->hw_read_wx(adapter,
niu_enable_interrupts(np, 1);
}
+static void niu_reset_buffers(struct niu *np)
+{
+ int i, j, k, err;
+
+ if (np->rx_rings) {
+ for (i = 0; i < np->num_rx_rings; i++) {
+ struct rx_ring_info *rp = &np->rx_rings[i];
+
+ for (j = 0, k = 0; j < MAX_RBR_RING_SIZE; j++) {
+ struct page *page;
+
+ page = rp->rxhash[j];
+ while (page) {
+ struct page *next =
+ (struct page *) page->mapping;
+ u64 base = page->index;
+ base = base >> RBR_DESCR_ADDR_SHIFT;
+ rp->rbr[k++] = cpu_to_le32(base);
+ page = next;
+ }
+ }
+ for (; k < MAX_RBR_RING_SIZE; k++) {
+ err = niu_rbr_add_page(np, rp, GFP_ATOMIC, k);
+ if (unlikely(err))
+ break;
+ }
+
+ rp->rbr_index = rp->rbr_table_size - 1;
+ rp->rcr_index = 0;
+ rp->rbr_pending = 0;
+ rp->rbr_refill_pending = 0;
+ }
+ }
+ if (np->tx_rings) {
+ for (i = 0; i < np->num_tx_rings; i++) {
+ struct tx_ring_info *rp = &np->tx_rings[i];
+
+ for (j = 0; j < MAX_TX_RING_SIZE; j++) {
+ if (rp->tx_buffs[j].skb)
+ (void) release_tx_packet(np, rp, j);
+ }
+
+ rp->pending = MAX_TX_RING_SIZE;
+ rp->prod = 0;
+ rp->cons = 0;
+ rp->wrap_bit = 0;
+ }
+ }
+}
+
static void niu_reset_task(struct work_struct *work)
{
struct niu *np = container_of(work, struct niu, reset_task);
niu_stop_hw(np);
+ spin_unlock_irqrestore(&np->lock, flags);
+
+ niu_reset_buffers(np);
+
+ spin_lock_irqsave(&np->lock, flags);
+
err = niu_init_hw(np);
if (!err) {
np->timer.expires = jiffies + HZ;
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEther PCC-TXD", 0x5261440f, 0x436768c5),
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEtherII PCC-TXD", 0x5261440f, 0x730df72e),
PCMCIA_DEVICE_PROD_ID12("Dynalink", "L100C16", 0x55632fd5, 0x66bc2a90),
+ PCMCIA_DEVICE_PROD_ID12("IO DATA", "ETXPCM", 0x547e66dc, 0x233adac2),
PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V3)", 0x0733cc81, 0x232019a8),
PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC3-TX", 0x481e0094, 0xf91af609),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "100BASE", 0x281f1c5d, 0x7c2add04),
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d),
PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d),
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa),
+ PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-TD", 0x5261440f, 0x47d5ca83),
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9),
PCMCIA_DEVICE_PROD_ID12("Corega,K.K.", "Ethernet LAN Card", 0x110d26d9, 0x9fd2f0a2),
PCMCIA_DEVICE_PROD_ID12("corega,K.K.", "Ethernet LAN Card", 0x9791a90e, 0x9fd2f0a2),
PCMCIA_DEVICE_PROD_ID1("CyQ've 10 Base-T LAN CARD", 0x94faf360),
PCMCIA_DEVICE_PROD_ID1("EP-210 PCMCIA LAN CARD.", 0x8850b4de),
PCMCIA_DEVICE_PROD_ID1("ETHER-C16", 0x06a8514f),
- PCMCIA_DEVICE_PROD_ID1("IC-CARD", 0x60cb09a6),
PCMCIA_DEVICE_PROD_ID1("NE2000 Compatible", 0x75b8ad5a),
PCMCIA_DEVICE_PROD_ID2("EN-6200P2", 0xa996d078),
/* too generic! */
pkt_size, PCI_DMA_FROMDEVICE);
rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
} else {
- pci_unmap_single(pdev, addr, pkt_size,
+ pci_unmap_single(pdev, addr, tp->rx_buf_sz,
PCI_DMA_FROMDEVICE);
tp->Rx_skbuff[entry] = NULL;
}
chg->path.para.p_type = SMT_P320B ;
chg->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ;
chg->path.mib_index = SBAPATHINDEX ;
- chg->path.path_pad = (u_short)NULL ;
+ chg->path.path_pad = 0;
chg->path.path_index = PRIMARY_RING ;
/* set P320F */
req->path.para.p_type = SMT_P320B ;
req->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ;
req->path.mib_index = SBAPATHINDEX ;
- req->path.path_pad = (u_short)NULL ;
+ req->path.path_pad = 0;
req->path.path_index = PRIMARY_RING ;
/* set P0017 */
/* set P19 */
req->a_addr.para.p_type = SMT_P0019 ;
req->a_addr.para.p_len = sizeof(struct smt_p_0019) - PARA_LEN ;
- req->a_addr.sba_pad = (u_short)NULL ;
+ req->a_addr.sba_pad = 0;
req->a_addr.alloc_addr = null_addr ;
/* set P1A */
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
if (!res)
- platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(res->start, SMC_IO_EXTENT);
free_netdev(ndev);
{default_port_device(0x0af0, 0xc031)}, /* Icon-Edge */
{icon321_port_device(0x0af0, 0xd013)}, /* Module HSxPA */
{icon321_port_device(0x0af0, 0xd031)}, /* Icon-321 */
- {default_port_device(0x0af0, 0xd033)}, /* Icon-322 */
+ {icon321_port_device(0x0af0, 0xd033)}, /* Icon-322 */
{USB_DEVICE(0x0af0, 0x7301)}, /* GE40x */
{USB_DEVICE(0x0af0, 0x7361)}, /* GE40x */
{USB_DEVICE(0x0af0, 0x7401)}, /* GI 0401 */
"Transmitting lingering data\n");
hso_net_start_xmit(hso_net->skb_tx_buf,
hso_net->net);
+ hso_net->skb_tx_buf = NULL;
}
result = hso_start_net_device(network_table[i]);
if (result)
#define MCS7830_VENDOR_ID 0x9710
#define MCS7830_PRODUCT_ID 0x7830
+#define MCS7730_PRODUCT_ID 0x7730
+
+#define SITECOM_VENDOR_ID 0x0DF6
+#define LN_030_PRODUCT_ID 0x0021
#define MCS7830_MII_ADVERTISE (ADVERTISE_PAUSE_CAP | ADVERTISE_100FULL | \
ADVERTISE_100HALF | ADVERTISE_10FULL | \
.nway_reset = usbnet_nway_reset,
};
+static int mcs7830_set_mac_address(struct net_device *netdev, void *p)
+{
+ int ret;
+ struct usbnet *dev = netdev_priv(netdev);
+ struct sockaddr *addr = p;
+
+ if (netif_running(netdev))
+ return -EBUSY;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EINVAL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+
+ ret = mcs7830_set_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN,
+ netdev->dev_addr);
+
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev)
{
struct net_device *net = dev->net;
net->ethtool_ops = &mcs7830_ethtool_ops;
net->set_multicast_list = mcs7830_set_multicast;
mcs7830_set_multicast(net);
+ net->set_mac_address = mcs7830_set_mac_address;
/* reserve space for the status byte on rx */
dev->rx_urb_size = ETH_FRAME_LEN + 1;
}
static const struct driver_info moschip_info = {
- .description = "MOSCHIP 7830 usb-NET adapter",
+ .description = "MOSCHIP 7830/7730 usb-NET adapter",
+ .bind = mcs7830_bind,
+ .rx_fixup = mcs7830_rx_fixup,
+ .flags = FLAG_ETHER,
+ .in = 1,
+ .out = 2,
+};
+
+static const struct driver_info sitecom_info = {
+ .description = "Sitecom LN-30 usb-NET adapter",
.bind = mcs7830_bind,
.rx_fixup = mcs7830_rx_fixup,
.flags = FLAG_ETHER,
USB_DEVICE(MCS7830_VENDOR_ID, MCS7830_PRODUCT_ID),
.driver_info = (unsigned long) &moschip_info,
},
+ {
+ USB_DEVICE(MCS7830_VENDOR_ID, MCS7730_PRODUCT_ID),
+ .driver_info = (unsigned long) &moschip_info,
+ },
+ {
+ USB_DEVICE(SITECOM_VENDOR_ID, LN_030_PRODUCT_ID),
+ .driver_info = (unsigned long) &sitecom_info,
+ },
{},
};
MODULE_DEVICE_TABLE(usb, products);
case -ENOENT:
break;
default:
- if (netif_msg_drv(pegasus))
+ if (netif_msg_drv(pegasus) && printk_ratelimit())
dev_dbg(&pegasus->intf->dev, "%s, status %d\n",
__FUNCTION__, urb->status);
}
set_current_state(TASK_RUNNING);
if (ret == -ENODEV)
netif_device_detach(pegasus->net);
- if (netif_msg_drv(pegasus))
+ if (netif_msg_drv(pegasus) && printk_ratelimit())
dev_err(&pegasus->intf->dev, "%s, status %d\n",
__FUNCTION__, ret);
goto out;
if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
if (ret == -ENODEV)
netif_device_detach(pegasus->net);
- if (netif_msg_drv(pegasus))
+ if (netif_msg_drv(pegasus) && printk_ratelimit())
dev_err(&pegasus->intf->dev, "%s, status %d\n",
__FUNCTION__, ret);
goto out;
pegasus->eth_regs[EthCtrl2] |= RX_PROMISCUOUS;
if (netif_msg_link(pegasus))
pr_info("%s: Promiscuous mode enabled.\n", net->name);
- } else if (net->mc_count ||
- (net->flags & IFF_ALLMULTI)) {
+ } else if (net->mc_count || (net->flags & IFF_ALLMULTI)) {
pegasus->eth_regs[EthCtrl0] |= RX_MULTICAST;
pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
if (netif_msg_link(pegasus))
pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
}
+ pegasus->ctrl_urb->status = 0;
+
pegasus->flags |= ETH_REGS_CHANGE;
ctrl_callback(pegasus->ctrl_urb);
}
break;
case SIOCDEVRESINSTATS :
- if( current->euid != 0 ) /* root only */
+ if (!capable(CAP_NET_ADMIN))
return -EPERM;
memset( &nl->in_stats, 0, sizeof(struct sbni_in_stats) );
break;
break;
case SIOCDEVSHWSTATE :
- if( current->euid != 0 ) /* root only */
+ if (!capable(CAP_NET_ADMIN))
return -EPERM;
spin_lock( &nl->lock );
#ifdef CONFIG_SBNI_MULTILINE
case SIOCDEVENSLAVE :
- if( current->euid != 0 ) /* root only */
+ if (!capable(CAP_NET_ADMIN))
return -EPERM;
if (copy_from_user( slave_name, ifr->ifr_data, sizeof slave_name ))
return enslave( dev, slave_dev );
case SIOCDEVEMANSIPATE :
- if( current->euid != 0 ) /* root only */
+ if (!capable(CAP_NET_ADMIN))
return -EPERM;
return emancipate( dev );
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = ei_poll;
#endif
- NS8390p_init(dev, 0);
+ NS8390_init(dev, 0);
#if 1
/* Enable interrupt generation on softconfig cards -- M.U */
return;
pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len,
PCI_DMA_TODEVICE);
- dev_kfree_skb(bf->skb);
+ dev_kfree_skb_any(bf->skb);
bf->skb = NULL;
}
mutex_init(&sc->lock);
spin_lock_init(&sc->rxbuflock);
spin_lock_init(&sc->txbuflock);
+ spin_lock_init(&sc->block);
/* Set private data */
pci_set_drvdata(pdev, hw);
sc->imask |= AR5K_INT_SWBA;
- if (ath5k_hw_hasveol(ah))
+ if (ath5k_hw_hasveol(ah)) {
+ spin_lock(&sc->block);
ath5k_beacon_send(sc);
+ spin_unlock(&sc->block);
+ }
}
/* TODO else AP */
TSF_TO_TU(tsf),
(unsigned long long) tsf);
} else {
+ spin_lock(&sc->block);
ath5k_beacon_send(sc);
+ spin_unlock(&sc->block);
}
}
if (status & AR5K_INT_RXEOL) {
ret = -EOPNOTSUPP;
goto end;
}
+
+ /* Set to a reasonable value. Note that this will
+ * be set to mac80211's value at ath5k_config(). */
+ sc->bintval = 1000;
+
ret = 0;
end:
mutex_unlock(&sc->lock);
struct ath5k_hw *ah = sc->ah;
int ret;
- /* Set to a reasonable value. Note that this will
- * be set to mac80211's value at ath5k_config(). */
- sc->bintval = 1000;
mutex_lock(&sc->lock);
if (sc->vif != vif) {
ret = -EIO;
ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct ath5k_softc *sc = hw->priv;
+ unsigned long flags;
int ret;
ath5k_debug_dump_skb(sc, skb, "BC ", 1);
goto end;
}
+ spin_lock_irqsave(&sc->block, flags);
ath5k_txbuf_free(sc, sc->bbuf);
sc->bbuf->skb = skb;
ret = ath5k_beacon_setup(sc, sc->bbuf);
if (ret)
sc->bbuf->skb = NULL;
- else {
+ spin_unlock_irqrestore(&sc->block, flags);
+ if (!ret) {
ath5k_beacon_config(sc);
mmiowb();
}
struct tasklet_struct txtq; /* tx intr tasklet */
struct ath5k_led tx_led; /* tx led */
+ spinlock_t block; /* protects beacon */
struct ath5k_buf *bbuf; /* beacon buffer */
unsigned int bhalq, /* SW q for outgoing beacons */
bmisscount, /* missed beacon transmits */
unsigned int curlen;
struct ath_txq *cabq;
struct ath_txq *mcastq;
+ struct ieee80211_tx_info *info;
avp = sc->sc_vaps[if_id];
mcastq = &avp->av_mcastq;
*/
curlen = skb->len;
+ info = IEEE80211_SKB_CB(skb);
+ if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+ /*
+ * TODO: make sure the seq# gets assigned properly (vs. other
+ * TX frames)
+ */
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ sc->seq_no += 0x10;
+ hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+ hdr->seq_ctrl |= cpu_to_le16(sc->seq_no);
+ }
+
/* XXX: spin_lock_bh should not be used here, but sparse bitches
* otherwise. We should fix sparse :) */
spin_lock_bh(&mcastq->axq_lock);
* hardware is gone (invalid).
*/
- if (!sc->sc_invalid)
- ath9k_hw_set_interrupts(ah, 0);
ath_draintxq(sc, false);
if (!sc->sc_invalid) {
ath_stoprecv(sc);
if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
sc->sc_imask |= ATH9K_INT_CST;
+ /* Note: We disable MIB interrupts for now as we don't yet
+ * handle processing ANI, otherwise you will get an interrupt
+ * storm after about 7 hours of usage making the system unusable
+ * with huge latency. Once we do have ANI processing included
+ * we can re-enable this interrupt. */
+#if 0
/*
* Enable MIB interrupts when there are hardware phy counters.
* Note we only do this (at the moment) for station mode.
if (ath9k_hw_phycounters(ah) &&
((sc->sc_opmode == ATH9K_M_STA) || (sc->sc_opmode == ATH9K_M_IBSS)))
sc->sc_imask |= ATH9K_INT_MIB;
+#endif
/*
* Some hardware processes the TIM IE and fires an
* interrupt when the TIM bit is set. For hardware
DPRINTF(sc, ATH_DBG_CONFIG, "%s\n", __func__);
+ tasklet_kill(&sc->intr_tq);
+ tasklet_kill(&sc->bcon_tasklet);
ath_stop(sc);
if (!sc->sc_invalid)
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
u32 sc_keymax; /* size of key cache */
DECLARE_BITMAP(sc_keymap, ATH_KEYMAX); /* key use bit map */
u8 sc_splitmic; /* split TKIP MIC keys */
- int sc_keytype;
/* RX */
struct list_head sc_rxbuf;
u32 sc_txintrperiod; /* tx interrupt batching */
int sc_haltype2q[ATH9K_WME_AC_VO+1]; /* HAL WME AC -> h/w qnum */
u32 sc_ant_tx[8]; /* recent tx frames/antenna */
+ u16 seq_no; /* TX sequence number */
/* Beacon */
struct ath9k_tx_queue_info sc_beacon_qi;
}
break;
case ATH9K_CIPHER_WEP:
- if (k->kv_len < 40 / NBBY) {
+ if (k->kv_len < LEN_WEP40) {
DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
"%s: WEP key length %u too small\n",
__func__, k->kv_len);
return false;
}
- if (k->kv_len <= 40 / NBBY)
+ if (k->kv_len <= LEN_WEP40)
keyType = AR_KEYTABLE_TYPE_40;
- else if (k->kv_len <= 104 / NBBY)
+ else if (k->kv_len <= LEN_WEP104)
keyType = AR_KEYTABLE_TYPE_104;
else
keyType = AR_KEYTABLE_TYPE_128;
key2 = get_unaligned_le32(k->kv_val + 6) ^ xorMask;
key3 = (get_unaligned_le16(k->kv_val + 10) ^ xorMask) & 0xffff;
key4 = get_unaligned_le32(k->kv_val + 12) ^ xorMask;
- if (k->kv_len <= 104 / NBBY)
+ if (k->kv_len <= LEN_WEP104)
key4 &= 0xff;
if (keyType == AR_KEYTABLE_TYPE_TKIP && ATH9K_IS_MIC_ENABLED(ah)) {
if (!ret)
return -EIO;
- sc->sc_keytype = hk.kv_type;
return 0;
}
{
struct ath_softc *sc = hw->priv;
int hdrlen, padsize;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+ /*
+ * As a temporary workaround, assign seq# here; this will likely need
+ * to be cleaned up to work better with Beacon transmission and virtual
+ * BSSes.
+ */
+ if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+ sc->seq_no += 0x10;
+ hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+ hdr->seq_ctrl |= cpu_to_le16(sc->seq_no);
+ }
/* Add the padding after the header if this is not already done */
hdrlen = ieee80211_get_hdrlen_from_skb(skb);
key->hw_key_idx = key->keyidx;
/* push IV and Michael MIC generation to stack */
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
- key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+ if (key->alg == ALG_TKIP)
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
}
break;
case DISABLE_KEY:
ath_key_delete(sc, key);
clear_bit(key->keyidx, sc->sc_keymap);
- sc->sc_keytype = ATH9K_CIPHER_CLR;
break;
default:
ret = -EINVAL;
tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
tx_status->flags &= ~ATH_TX_BAR;
}
- if (tx_status->flags)
- tx_info->status.excessive_retries = 1;
+
+ if (tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY)) {
+ if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+ /* Frame was not ACKed, but an ACK was expected */
+ tx_info->status.excessive_retries = 1;
+ }
+ } else {
+ /* Frame was ACKed */
+ tx_info->flags |= IEEE80211_TX_STAT_ACK;
+ }
tx_info->status.retry_count = tx_status->retries;
{
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct ath_softc *sc = hw->priv;
+ enum ath9k_int status;
- if (pdev->irq)
+ if (pdev->irq) {
+ ath9k_hw_set_interrupts(sc->sc_ah, 0);
+ /* clear the ISR */
+ ath9k_hw_getisr(sc->sc_ah, &status);
+ sc->sc_invalid = 1;
free_irq(pdev->irq, sc);
+ }
ath_detach(sc);
+
pci_iounmap(pdev, sc->mem);
pci_release_region(pdev, 0);
pci_disable_device(pdev);
struct ath_arx_tid *rxtid, int drop)
{
struct ath_rxbuf *rxbuf;
+ unsigned long flag;
- spin_lock_bh(&rxtid->tidlock);
+ spin_lock_irqsave(&rxtid->tidlock, flag);
while (rxtid->baw_head != rxtid->baw_tail) {
rxbuf = rxtid->rxbuf + rxtid->baw_head;
if (!rxbuf->rx_wbuf) {
INCR(rxtid->baw_head, ATH_TID_MAX_BUFS);
INCR(rxtid->seq_next, IEEE80211_SEQ_MAX);
}
- spin_unlock_bh(&rxtid->tidlock);
+ spin_unlock_irqrestore(&rxtid->tidlock, flag);
}
static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc,
txctl->keyix = tx_info->control.hw_key->hw_key_idx;
txctl->frmlen += tx_info->control.icv_len;
- if (sc->sc_keytype == ATH9K_CIPHER_WEP)
+ if (tx_info->control.hw_key->alg == ALG_WEP)
txctl->keytype = ATH9K_KEY_TYPE_WEP;
- else if (sc->sc_keytype == ATH9K_CIPHER_TKIP)
+ else if (tx_info->control.hw_key->alg == ALG_TKIP)
txctl->keytype = ATH9K_KEY_TYPE_TKIP;
- else if (sc->sc_keytype == ATH9K_CIPHER_AES_CCM)
+ else if (tx_info->control.hw_key->alg == ALG_CCMP)
txctl->keytype = ATH9K_KEY_TYPE_AES;
}
txctl->flags = ATH9K_TXDESC_CLRDMASK; /* needed for crypto errors */
if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK)
- tx_info->flags |= ATH9K_TXDESC_NOACK;
+ txctl->flags |= ATH9K_TXDESC_NOACK;
if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
- tx_info->flags |= ATH9K_TXDESC_RTSENA;
+ txctl->flags |= ATH9K_TXDESC_RTSENA;
/*
* Setup for rate calculations.
int atmel_open(struct net_device *dev)
{
struct atmel_private *priv = netdev_priv(dev);
- int i, channel;
+ int i, channel, err;
/* any scheduled timer is no longer needed and might screw things up.. */
del_timer_sync(&priv->management_timer);
priv->site_survey_state = SITE_SURVEY_IDLE;
priv->station_is_associated = 0;
- if (!reset_atmel_card(dev))
- return -EAGAIN;
+ err = reset_atmel_card(dev);
+ if (err)
+ return err;
if (priv->config_reg_domain) {
priv->reg_domain = priv->config_reg_domain;
}
if (status == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG) {
- /* Do opensystem first, then try sharedkey */
+ /* Flip back and forth between WEP auth modes until the max
+ * authentication tries has been exceeded.
+ */
if (system == WLAN_AUTH_OPEN) {
priv->CurrentAuthentTransactionSeqNum = 0x001;
priv->exclude_unencrypted = 1;
send_authentication_request(priv, WLAN_AUTH_SHARED_KEY, NULL, 0);
return;
+ } else if ( system == WLAN_AUTH_SHARED_KEY
+ && priv->wep_is_on) {
+ priv->CurrentAuthentTransactionSeqNum = 0x001;
+ priv->exclude_unencrypted = 0;
+ send_authentication_request(priv, WLAN_AUTH_OPEN, NULL, 0);
+ return;
} else if (priv->connect_to_any_BSS) {
int bss_index;
if (i == 0) {
printk(KERN_ALERT "%s: MAC failed to boot.\n", priv->dev->name);
- return 0;
+ return -EIO;
}
if ((priv->host_info_base = atmel_read16(priv->dev, MR2)) == 0xffff) {
printk(KERN_ALERT "%s: card missing.\n", priv->dev->name);
- return 0;
+ return -ENODEV;
}
/* now check for completion of MAC initialization through
if (i == 0) {
printk(KERN_ALERT "%s: MAC failed to initialise.\n",
priv->dev->name);
- return 0;
+ return -EIO;
}
/* Check for MAC_INIT_OK only on the register that the MAC_INIT_OK was set */
if ((mr3 & MAC_INIT_COMPLETE) &&
!(atmel_read16(priv->dev, MR3) & MAC_INIT_OK)) {
printk(KERN_ALERT "%s: MAC failed MR3 self-test.\n", priv->dev->name);
- return 0;
+ return -EIO;
}
if ((mr1 & MAC_INIT_COMPLETE) &&
!(atmel_read16(priv->dev, MR1) & MAC_INIT_OK)) {
printk(KERN_ALERT "%s: MAC failed MR1 self-test.\n", priv->dev->name);
- return 0;
+ return -EIO;
}
atmel_copy_to_host(priv->dev, (unsigned char *)iface,
iface->func_ctrl = le16_to_cpu(iface->func_ctrl);
iface->mac_status = le16_to_cpu(iface->mac_status);
- return 1;
+ return 0;
}
/* determine type of memory and MAC address */
/* Standard firmware in flash, boot it up and ask
for the Mac Address */
priv->card_type = CARD_TYPE_SPI_FLASH;
- if (atmel_wakeup_firmware(priv)) {
+ if (atmel_wakeup_firmware(priv) == 0) {
atmel_get_mib(priv, Mac_Address_Mib_Type, 0, dev->dev_addr, 6);
/* got address, now squash it again until the network
struct atmel_private *priv = netdev_priv(dev);
u8 configuration;
int old_state = priv->station_state;
+ int err = 0;
/* data to add to the firmware names, in priority order
this implemenents firmware versioning */
dev->name);
strcpy(priv->firmware_id, "atmel_at76c502.bin");
}
- if (request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev) != 0) {
+ err = request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev);
+ if (err != 0) {
printk(KERN_ALERT
"%s: firmware %s is missing, cannot continue.\n",
dev->name, priv->firmware_id);
- return 0;
+ return err;
}
} else {
int fw_index = 0;
"%s: firmware %s is missing, cannot start.\n",
dev->name, priv->firmware_id);
priv->firmware_id[0] = '\0';
- return 0;
+ return -ENOENT;
}
}
release_firmware(fw_entry);
}
- if (!atmel_wakeup_firmware(priv))
- return 0;
+ err = atmel_wakeup_firmware(priv);
+ if (err != 0)
+ return err;
/* Check the version and set the correct flag for wpa stuff,
old and new firmware is incompatible.
if (!priv->radio_on_broken) {
if (atmel_send_command_wait(priv, CMD_EnableRadio, NULL, 0) ==
CMD_STATUS_REJECTED_RADIO_OFF) {
- printk(KERN_INFO
- "%s: cannot turn the radio on. (Hey radio, you're beautiful!)\n",
+ printk(KERN_INFO "%s: cannot turn the radio on.\n",
dev->name);
- return 0;
+ return -EIO;
}
}
wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
}
- return 1;
+ return 0;
}
static void atmel_send_command(struct atmel_private *priv, int command,
return 0;
}
-/* Update the rfkill state */
-static void b43_rfkill_update_state(struct b43_wldev *dev)
-{
- struct b43_rfkill *rfk = &(dev->wl->rfkill);
-
- if (!dev->radio_hw_enable) {
- rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED;
- return;
- }
-
- if (!dev->phy.radio_on)
- rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED;
- else
- rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-
-}
-
/* The poll callback for the hardware button. */
static void b43_rfkill_poll(struct input_polled_dev *poll_dev)
{
if (unlikely(enabled != dev->radio_hw_enable)) {
dev->radio_hw_enable = enabled;
report_change = 1;
- b43_rfkill_update_state(dev);
b43info(wl, "Radio hardware status changed to %s\n",
enabled ? "ENABLED" : "DISABLED");
}
return 0;
}
-/* Update the rfkill state */
-static void b43legacy_rfkill_update_state(struct b43legacy_wldev *dev)
-{
- struct b43legacy_rfkill *rfk = &(dev->wl->rfkill);
-
- if (!dev->radio_hw_enable) {
- rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED;
- return;
- }
-
- if (!dev->phy.radio_on)
- rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED;
- else
- rfk->rfkill->state = RFKILL_STATE_UNBLOCKED;
-
-}
-
/* The poll callback for the hardware button. */
static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev)
{
if (unlikely(enabled != dev->radio_hw_enable)) {
dev->radio_hw_enable = enabled;
report_change = 1;
- b43legacy_rfkill_update_state(dev);
b43legacyinfo(wl, "Radio hardware status changed to %s\n",
enabled ? "ENABLED" : "DISABLED");
}
iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
udelay(10);
-
- iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+ /* clear "init complete" move adapter D0A* --> D0U state */
+ iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
spin_unlock_irqrestore(&priv->lock, flags);
}
udelay(10);
- iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+ /* clear "init complete" move adapter D0A* --> D0U state */
+ iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
spin_unlock_irqrestore(&priv->lock, flags);
}
FH_TFDIB_CTRL0_REG(FH_SRVC_CHNL),
phy_addr & FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK);
- /* FIME: write the MSB of the phy_addr in CTRL1
- * iwl_write_direct32(priv,
- IWL_FH_TFDIB_CTRL1_REG(IWL_FH_SRVC_CHNL),
- ((phy_addr & MSB_MSK)
- << FH_MEM_TFDIB_REG1_ADDR_BITSHIFT) | byte_count);
- */
iwl_write_direct32(priv,
- FH_TFDIB_CTRL1_REG(FH_SRVC_CHNL), byte_cnt);
+ FH_TFDIB_CTRL1_REG(FH_SRVC_CHNL),
+ (iwl_get_dma_hi_address(phy_addr)
+ << FH_MEM_TFDIB_REG1_ADDR_BITSHIFT) | byte_cnt);
+
iwl_write_direct32(priv,
FH_TCSR_CHNL_TX_BUF_STS_REG(FH_SRVC_CHNL),
1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM |
!sta->ht_info.ht_supported)
return -1;
- if (priv->current_ht_config.tx_mimo_ps_mode == IWL_MIMO_PS_STATIC)
+ if (((sta->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS) >> 2)
+ == IWL_MIMO_PS_STATIC)
return -1;
/* Need both Tx chains/antennas to support MIMO */
}
/**
- * iwl4965_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
+ * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
* @priv: staging_rxon is compared to active_rxon
*
* If the RXON structure is changing enough to require a new tune,
* or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
* a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
*/
-static int iwl4965_full_rxon_required(struct iwl_priv *priv)
+static int iwl_full_rxon_required(struct iwl_priv *priv)
{
/* These items are only settable from the full RXON command */
priv->active_rxon.ofdm_ht_single_stream_basic_rates) ||
(priv->staging_rxon.ofdm_ht_dual_stream_basic_rates !=
priv->active_rxon.ofdm_ht_dual_stream_basic_rates) ||
- (priv->staging_rxon.rx_chain != priv->active_rxon.rx_chain) ||
(priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id))
return 1;
/* If we don't need to send a full RXON, we can use
* iwl4965_rxon_assoc_cmd which is used to reconfigure filter
* and other flags for the current radio configuration. */
- if (!iwl4965_full_rxon_required(priv)) {
+ if (!iwl_full_rxon_required(priv)) {
ret = iwl_send_rxon_assoc(priv);
if (ret) {
IWL_ERROR("Error setting RXON_ASSOC (%d)\n", ret);
iwl_conf->supported_chan_width = 0;
}
- iwl_conf->tx_mimo_ps_mode =
- (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2);
memcpy(iwl_conf->supp_mcs_set, ht_conf->supp_mcs_set, 16);
iwl_conf->control_channel = ht_bss_conf->primary_channel;
udelay(5);
/* FIXME: apm_ops.suspend(priv) */
- priv->cfg->ops->lib->apm_ops.reset(priv);
+ if (exit_pending || test_bit(STATUS_IN_SUSPEND, &priv->status))
+ priv->cfg->ops->lib->apm_ops.stop(priv);
+ else
+ priv->cfg->ops->lib->apm_ops.reset(priv);
priv->cfg->ops->lib->free_shared_mem(priv);
exit:
{
struct iwl_priv *priv = hw->priv;
int ret;
+ u16 pci_cmd;
IWL_DEBUG_MAC80211("enter\n");
pci_restore_state(priv->pci_dev);
pci_enable_msi(priv->pci_dev);
+ /* enable interrupts if needed: hw bug w/a */
+ pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd);
+ if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
+ pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
+ pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd);
+ }
+
ret = request_irq(priv->pci_dev->irq, iwl4965_isr, IRQF_SHARED,
DRV_NAME, priv);
if (ret) {
priv->assoc_id = 0;
timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
- priv->timestamp = le64_to_cpu(timestamp) + (priv->beacon_int * 1000);
+ priv->timestamp = le64_to_cpu(timestamp);
IWL_DEBUG_MAC80211("leave\n");
spin_unlock_irqrestore(&priv->lock, flags);
iwl_dbgfs_unregister(priv);
sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group);
+ /* ieee80211_unregister_hw call wil cause iwl4965_mac_stop to
+ * to be called and iwl4965_down since we are removing the device
+ * we need to set STATUS_EXIT_PENDING bit.
+ */
+ set_bit(STATUS_EXIT_PENDING, &priv->status);
if (priv->mac80211_registered) {
ieee80211_unregister_hw(priv->hw);
priv->mac80211_registered = 0;
+ } else {
+ iwl4965_down(priv);
}
- set_bit(STATUS_EXIT_PENDING, &priv->status);
-
- iwl4965_down(priv);
-
/* make sure we flush any pending irq or
* tasklet for the driver
*/
clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
}
-static u8 is_single_rx_stream(struct iwl_priv *priv)
+static bool is_single_rx_stream(struct iwl_priv *priv)
{
return !priv->current_ht_config.is_ht ||
((priv->current_ht_config.supp_mcs_set[1] == 0) &&
- (priv->current_ht_config.supp_mcs_set[2] == 0)) ||
- priv->ps_mode == IWL_MIMO_PS_STATIC;
+ (priv->current_ht_config.supp_mcs_set[2] == 0));
}
static u8 iwl_is_channel_extension(struct iwl_priv *priv,
* MIMO (dual stream) requires at least 2, but works better with 3.
* This does not determine *which* chains to use, just how many.
*/
-static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv,
- u8 *idle_state, u8 *rx_state)
+static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
{
- u8 is_single = is_single_rx_stream(priv);
- u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1;
+ bool is_single = is_single_rx_stream(priv);
+ bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
/* # of Rx chains to use when expecting MIMO. */
if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC)))
- *rx_state = 2;
+ return 2;
else
- *rx_state = 3;
+ return 3;
+}
+static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
+{
+ int idle_cnt;
+ bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
/* # Rx chains when idling and maybe trying to save power */
switch (priv->ps_mode) {
case IWL_MIMO_PS_STATIC:
case IWL_MIMO_PS_DYNAMIC:
- *idle_state = (is_cam) ? 2 : 1;
+ idle_cnt = (is_cam) ? 2 : 1;
break;
case IWL_MIMO_PS_NONE:
- *idle_state = (is_cam) ? *rx_state : 1;
+ idle_cnt = (is_cam) ? active_cnt : 1;
break;
+ case IWL_MIMO_PS_INVALID:
default:
- *idle_state = 1;
+ IWL_ERROR("invalide mimo ps mode %d\n", priv->ps_mode);
+ WARN_ON(1);
+ idle_cnt = -1;
break;
}
-
- return 0;
+ return idle_cnt;
}
/**
*/
void iwl_set_rxon_chain(struct iwl_priv *priv)
{
- u8 is_single = is_single_rx_stream(priv);
- u8 idle_state, rx_state;
-
- priv->staging_rxon.rx_chain = 0;
- rx_state = idle_state = 3;
+ bool is_single = is_single_rx_stream(priv);
+ bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
+ u8 idle_rx_cnt, active_rx_cnt;
+ u16 rx_chain;
/* Tell uCode which antennas are actually connected.
* Before first association, we assume all antennas are connected.
* Just after first association, iwl_chain_noise_calibration()
* checks which antennas actually *are* connected. */
- priv->staging_rxon.rx_chain |=
- cpu_to_le16(priv->hw_params.valid_rx_ant <<
- RXON_RX_CHAIN_VALID_POS);
+ rx_chain = priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
/* How many receivers should we use? */
- iwlcore_get_rx_chain_counter(priv, &idle_state, &rx_state);
- priv->staging_rxon.rx_chain |=
- cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS);
- priv->staging_rxon.rx_chain |=
- cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS);
-
- if (!is_single && (rx_state >= 2) &&
- !test_bit(STATUS_POWER_PMI, &priv->status))
+ active_rx_cnt = iwl_get_active_rx_chain_count(priv);
+ idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt);
+
+ /* correct rx chain count accoridng hw settings */
+ if (priv->hw_params.rx_chains_num < active_rx_cnt)
+ active_rx_cnt = priv->hw_params.rx_chains_num;
+
+ if (priv->hw_params.rx_chains_num < idle_rx_cnt)
+ idle_rx_cnt = priv->hw_params.rx_chains_num;
+
+ rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
+ rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS;
+
+ priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain);
+
+ if (!is_single && (active_rx_cnt >= 2) && is_cam)
priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
else
priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
- IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain);
+ IWL_DEBUG_ASSOC("rx_chain=0x%Xi active=%d idle=%d\n",
+ priv->staging_rxon.rx_chain,
+ active_rx_cnt, idle_rx_cnt);
+
+ WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
+ active_rx_cnt < idle_rx_cnt);
}
EXPORT_SYMBOL(iwl_set_rxon_chain);
/* self configuration data */
u8 is_ht;
u8 supported_chan_width;
- u16 tx_mimo_ps_mode;
u8 is_green_field;
u8 sgf; /* HT_SHORT_GI_* short guard interval */
u8 max_amsdu_size;
#define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000)
+#define FH_MEM_TFDIB_REG1_ADDR_BITSHIFT 28
/**
* Transmit DMA Channel Control/Status Registers (TCSR)
rx_status.antenna = 0;
rx_status.flag = 0;
- rx_status.flag |= RX_FLAG_TSFT;
+
+ /* TSF isn't reliable. In order to allow smooth user experience,
+ * this W/A doesn't propagate it to the mac80211 */
+ /*rx_status.flag |= RX_FLAG_TSFT;*/
if ((unlikely(rx_start->cfg_phy_cnt > 20))) {
IWL_DEBUG_DROP("dsp size out of range [0,20]: %d/n",
else
scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
- if ((scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) && n_probes)
+ if (n_probes)
scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
scan_ch->active_dwell = cpu_to_le16(active_dwell);
/**
* iwl_tx_queue_init - Allocate and initialize one tx/cmd queue
*/
-static int iwl_tx_queue_init(struct iwl_priv *priv,
- struct iwl_tx_queue *txq,
+static int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq,
int slots_num, u32 txq_id)
{
int i, len;
- int rc = 0;
+ int ret;
/*
* Alloc buffer array for commands (Tx or other types of commands).
continue;
}
- txq->cmd[i] = kmalloc(len, GFP_KERNEL | GFP_DMA);
+ txq->cmd[i] = kmalloc(len, GFP_KERNEL);
if (!txq->cmd[i])
- return -ENOMEM;
+ goto err;
}
/* Alloc driver data array and TFD circular buffer */
- rc = iwl_tx_queue_alloc(priv, txq, txq_id);
- if (rc) {
- for (i = 0; i < slots_num; i++)
- kfree(txq->cmd[i]);
+ ret = iwl_tx_queue_alloc(priv, txq, txq_id);
+ if (ret)
+ goto err;
- return -ENOMEM;
- }
txq->need_update = 0;
/* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
iwl_hw_tx_queue_init(priv, txq);
return 0;
+err:
+ for (i = 0; i < slots_num; i++) {
+ kfree(txq->cmd[i]);
+ txq->cmd[i] = NULL;
+ }
+
+ if (txq_id == IWL_CMD_QUEUE_NUM) {
+ kfree(txq->cmd[slots_num]);
+ txq->cmd[slots_num] = NULL;
+ }
+ return -ENOMEM;
}
/**
* iwl_hw_txq_ctx_free - Free TXQ Context
if (ret < 0) {
lbs_pr_err("can't download helper at 0x%x, ret %d\n",
sent, ret);
- goto done;
+ goto err_release;
}
if (count == 0)
sent += count;
}
+err_release:
release_firmware(fw);
- ret = 0;
-
done:
lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
return ret;
}
ret = if_cs_poll_while_fw_download(card, IF_CS_SCRATCH, 0x5a);
- if (ret < 0) {
+ if (ret < 0)
lbs_pr_err("firmware download failed\n");
- goto err_release;
- }
-
- ret = 0;
- goto done;
-
err_release:
release_firmware(fw);
priv->promiscuous = promisc;
}
+ /* If we're not in promiscuous mode, then we need to set the
+ * group address if either we want to multicast, or if we were
+ * multicasting and want to stop */
if (! promisc && (mc_count || priv->mc_count) ) {
struct dev_mc_list *p = dev->mc_list;
struct hermes_multicast mclist;
printk(KERN_WARNING "%s: Multicast list is "
"longer than mc_count\n", dev->name);
- err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES,
- HERMES_BYTES_TO_RECLEN(priv->mc_count * ETH_ALEN),
- &mclist);
+ err = hermes_write_ltv(hw, USER_BAP,
+ HERMES_RID_CNFGROUPADDRESSES,
+ HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN),
+ &mclist);
if (err)
printk(KERN_ERR "%s: Error %d setting multicast list.\n",
dev->name, err);
*/
#define is_power_of_two(x) ( !((x) & ((x)-1)) )
#define low_bit_mask(x) ( ((x)-1) & ~(x) )
-#define is_valid_mask(x) is_power_of_two(1 + (x) + low_bit_mask(x))
+#define is_valid_mask(x) is_power_of_two(1LU + (x) + low_bit_mask(x))
/*
* Macro's to find first set bit in a variable.
* does not exceed the given typelimit.
*/
#define FIELD_CHECK(__mask, __type) \
- BUILD_BUG_ON(!__builtin_constant_p(__mask) || \
- !(__mask) || \
+ BUILD_BUG_ON(!(__mask) || \
!is_valid_mask(__mask) || \
(__mask) != (__type)(__mask)) \
{ USB_DEVICE(0x0586, 0x3407), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x129b, 0x1666), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0105, 0x145f), .driver_info = DEVICE_ZD1211 },
/* ZD1211B */
{ USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
return -ENODEV;
}
+ /* remove the device from the pci core */
+ pci_remove_bus_device(dev);
+
/* queue work item to blow away this sysfs entry and other
* parts.
*/
INIT_WORK(&dslot->remove_work, remove_slot_worker);
queue_work(dummyphp_wq, &dslot->remove_work);
- /* blow away this sysfs entry and other parts. */
- remove_slot(dslot);
-
pci_dev_put(dev);
}
return 0;
return 1;
}
}
- while (timeout > 1000) {
+ while (timeout > 0) {
msleep(10);
timeout -= 10;
if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) {
}
+static int blacklist_iommu(const struct dmi_system_id *id)
+{
+ printk(KERN_INFO "%s detected; disabling IOMMU\n",
+ id->ident);
+ dmar_disabled = 1;
+ return 0;
+}
+
+static struct dmi_system_id __initdata intel_iommu_dmi_table[] = {
+ { /* Some DG33BU BIOS revisions advertised non-existent VT-d */
+ .callback = blacklist_iommu,
+ .ident = "Intel DG33BU",
+ { DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
+ DMI_MATCH(DMI_BOARD_NAME, "DG33BU"),
+ }
+ },
+ { }
+};
+
+
void __init detect_intel_iommu(void)
{
if (swiotlb || no_iommu || iommu_detected || dmar_disabled)
return;
if (early_dmar_detect()) {
+ dmi_check_system(intel_iommu_dmi_table);
+ if (dmar_disabled)
+ return;
iommu_detected = 1;
}
}
#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/stat.h>
#include <linux/topology.h>
#endif /* HAVE_PCI_LEGACY */
#ifdef HAVE_PCI_MMAP
+
+static int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma)
+{
+ unsigned long nr, start, size;
+
+ nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
+ start = vma->vm_pgoff;
+ size = pci_resource_len(pdev, resno) >> PAGE_SHIFT;
+ if (start < size && size - start >= nr)
+ return 1;
+ WARN(1, "process \"%s\" tried to map 0x%08lx-0x%08lx on %s BAR %d (size 0x%08lx)\n",
+ current->comm, start, start+nr, pci_name(pdev), resno, size);
+ return 0;
+}
+
/**
* pci_mmap_resource - map a PCI resource into user memory space
* @kobj: kobject for mapping
if (i >= PCI_ROM_RESOURCE)
return -ENODEV;
+ if (!pci_mmap_fits(pdev, i, vma))
+ return -EINVAL;
+
/* pci_mmap_page_range() expects the same kind of entry as coming
* from /proc/bus/pci/ which is a "user visible" value. If this is
* different from the resource itself, arch will do necessary fixup.
*/
pci_read_config_dword(child_dev, child_pos + PCI_EXP_DEVCAP,
®32);
- if (!(reg32 & PCI_EXP_DEVCAP_RBER && !aspm_force)) {
+ if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) {
printk("Pre-1.1 PCIe device detected, "
"disable ASPM for %s. It can be enabled forcedly"
" with 'pcie_aspm=force'\n", pci_name(pdev));
} else {
res->start = l64;
res->end = l64 + sz64;
+ printk(KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n",
+ pci_name(dev), pos, (unsigned long long)res->start,
+ (unsigned long long)res->end);
}
} else {
sz = pci_size(l, sz, mask);
res->start = l;
res->end = l + sz;
+ printk(KERN_DEBUG "PCI: %s reg %x %s: [%llx, %llx]\n", pci_name(dev),
+ pos, (res->flags & IORESOURCE_IO) ? "io port":"32bit mmio",
+ (unsigned long long)res->start, (unsigned long long)res->end);
}
out:
res->start = base;
if (!res->end)
res->end = limit + 0xfff;
- printk(KERN_INFO "PCI: bridge %s io port: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
+ printk(KERN_DEBUG "PCI: bridge %s io port: [%llx, %llx]\n",
+ pci_name(dev), (unsigned long long) res->start,
+ (unsigned long long) res->end);
}
res = child->resource[1];
res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
res->start = base;
res->end = limit + 0xfffff;
- printk(KERN_INFO "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
+ printk(KERN_DEBUG "PCI: bridge %s 32bit mmio: [%llx, %llx]\n",
+ pci_name(dev), (unsigned long long) res->start,
+ (unsigned long long) res->end);
}
res = child->resource[2];
res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
res->start = base;
res->end = limit + 0xfffff;
- printk(KERN_INFO "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n", pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64)?"64":"32",res->start, res->end);
+ printk(KERN_DEBUG "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n",
+ pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64) ? "64" : "32",
+ (unsigned long long) res->start, (unsigned long long) res->end);
}
}
* time.
*/
struct pci_dev *pci_find_device(unsigned int vendor, unsigned int device,
- const struct pci_dev *from)
+ struct pci_dev *from)
{
struct pci_dev *pdev;
* this file.
*/
static struct pci_dev *pci_get_dev_by_id(const struct pci_device_id *id,
- const struct pci_dev *from)
+ struct pci_dev *from)
{
struct device *dev;
struct device *dev_start = NULL;
*/
struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device,
unsigned int ss_vendor, unsigned int ss_device,
- const struct pci_dev *from)
+ struct pci_dev *from)
{
struct pci_dev *pdev;
struct pci_device_id *id;
continue;
r_size = r->end - r->start + 1;
/* For bridges size != alignment */
- align = (i < PCI_BRIDGE_RESOURCES) ? r_size : r->start;
+ align = resource_alignment(r);
order = __ffs(align) - 20;
if (order > 11) {
- dev_warn(&dev->dev, "BAR %d too large: "
+ dev_warn(&dev->dev, "BAR %d bad alignment %llx: "
"%#016llx-%#016llx\n", i,
+ (unsigned long long)align,
(unsigned long long)r->start,
(unsigned long long)r->end);
r->flags = 0;
if (!res)
continue;
- printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n", bus->number, i, (res->flags & IORESOURCE_IO)? "io port":"mmio", res->start, res->end);
+ printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n",
+ bus->number, i,
+ (res->flags & IORESOURCE_IO) ? "io port" : "mmio",
+ (unsigned long long) res->start,
+ (unsigned long long) res->end);
}
}
p_drv = to_pcmcia_drv(dev->driver);
s = p_dev->socket;
+ /* The PCMCIA code passes the match data in via dev->driver_data
+ * which is an ugly hack. Once the driver probe is called it may
+ * and often will overwrite the match data so we must save it first
+ *
+ * handle pseudo multifunction devices:
+ * there are at most two pseudo multifunction devices.
+ * if we're matching against the first, schedule a
+ * call which will then check whether there are two
+ * pseudo devices, and if not, add the second one.
+ */
+ did = p_dev->dev.driver_data;
+
ds_dbg(1, "trying to bind %s to %s\n", p_dev->dev.bus_id,
p_drv->drv.name);
goto put_module;
}
- /* handle pseudo multifunction devices:
- * there are at most two pseudo multifunction devices.
- * if we're matching against the first, schedule a
- * call which will then check whether there are two
- * pseudo devices, and if not, add the second one.
- */
- did = p_dev->dev.driver_data;
if (did && (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) &&
(p_dev->socket->device_count == 1) && (p_dev->device_no == 0))
pcmcia_add_device_later(p_dev->socket, 0);
- put_module:
+put_module:
if (ret)
module_put(p_drv->owner);
- put_dev:
+put_dev:
if (ret)
put_device(dev);
return (ret);
add_timer(&skt->poll_timer);
- device_create_file(&skt->socket.dev, &dev_attr_status);
+ ret = device_create_file(&skt->socket.dev, &dev_attr_status);
+ if (ret)
+ goto out_err_8;
}
dev_set_drvdata(dev, sinfo);
do {
skt = &sinfo->skt[i];
+ device_remove_file(&skt->socket.dev, &dev_attr_status);
+ out_err_8:
del_timer_sync(&skt->poll_timer);
pcmcia_unregister_socket(&skt->socket);
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
extended_irq = &res->data.extended_irq;
- if (extended_irq->producer_consumer == ACPI_PRODUCER)
- return AE_OK;
if (extended_irq->interrupt_count == 0)
pnp_add_irq_resource(dev, 0, IORESOURCE_DISABLED);
static int cmos_suspend(struct device *dev, pm_message_t mesg)
{
struct cmos_rtc *cmos = dev_get_drvdata(dev);
- int do_wake = device_may_wakeup(dev);
unsigned char tmp;
/* only the alarm might be a wakeup event source */
if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) {
unsigned char mask;
- if (do_wake)
+ if (device_may_wakeup(dev))
mask = RTC_IRQMASK & ~RTC_AIE;
else
mask = RTC_IRQMASK;
return 0;
}
+/* We want RTC alarms to wake us from e.g. ACPI G2/S5 "soft off", even
+ * after a detour through G3 "mechanical off", although the ACPI spec
+ * says wakeup should only work from G1/S4 "hibernate". To most users,
+ * distinctions between S4 and S5 are pointless. So when the hardware
+ * allows, don't draw that distinction.
+ */
+static inline int cmos_poweroff(struct device *dev)
+{
+ return cmos_suspend(dev, PMSG_HIBERNATE);
+}
+
static int cmos_resume(struct device *dev)
{
struct cmos_rtc *cmos = dev_get_drvdata(dev);
#else
#define cmos_suspend NULL
#define cmos_resume NULL
+
+static inline int cmos_poweroff(struct device *dev)
+{
+ return -ENOSYS;
+}
+
#endif
/*----------------------------------------------------------------*/
static int __devinit
cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
{
- /* REVISIT paranoia argues for a shutdown notifier, since PNP
- * drivers can't provide shutdown() methods to disable IRQs.
- * Or better yet, fix PNP to allow those methods...
- */
if (pnp_port_start(pnp,0) == 0x70 && !pnp_irq_valid(pnp,0))
/* Some machines contain a PNP entry for the RTC, but
* don't define the IRQ. It should always be safe to
#define cmos_pnp_resume NULL
#endif
+static void cmos_pnp_shutdown(struct device *pdev)
+{
+ if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(pdev))
+ return;
+
+ cmos_do_shutdown();
+}
static const struct pnp_device_id rtc_ids[] = {
{ .id = "PNP0b00", },
.flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
.suspend = cmos_pnp_suspend,
.resume = cmos_pnp_resume,
+ .driver = {
+ .name = (char *)driver_name,
+ .shutdown = cmos_pnp_shutdown,
+ }
};
#endif /* CONFIG_PNP */
static void cmos_platform_shutdown(struct platform_device *pdev)
{
+ if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(&pdev->dev))
+ return;
+
cmos_do_shutdown();
}
return err;
}
+static int rtc_dev_fasync(int fd, struct file *file, int on)
+{
+ struct rtc_device *rtc = file->private_data;
+ return fasync_helper(fd, file, on, &rtc->async_queue);
+}
+
static int rtc_dev_release(struct inode *inode, struct file *file)
{
struct rtc_device *rtc = file->private_data;
if (rtc->ops->release)
rtc->ops->release(rtc->dev.parent);
+ if (file->f_flags & FASYNC)
+ rtc_dev_fasync(-1, file, 0);
+
clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags);
return 0;
}
-static int rtc_dev_fasync(int fd, struct file *file, int on)
-{
- struct rtc_device *rtc = file->private_data;
- return fasync_helper(fd, file, on, &rtc->async_queue);
-}
-
static const struct file_operations rtc_dev_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
*/
void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
{
- unsigned int days, month, year;
+ unsigned int month, year;
+ int days;
days = time / 86400;
- time -= days * 86400;
+ time -= (unsigned int) days * 86400;
/* day of the week, 1970-01-01 was a Thursday */
tm->tm_wday = (days + 4) % 7;
for (i = 0; i < gdev->count; i++) {
if (gdev->cdev[i]) {
- dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
+ if (dev_get_drvdata(&gdev->cdev[i]->dev) == gdev)
+ dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
put_device(&gdev->cdev[i]->dev);
}
}
if (dev_get_drvdata(&gdev->cdev[i]->dev) == gdev)
dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
put_device(&gdev->cdev[i]->dev);
+ gdev->cdev[i] = NULL;
}
mutex_unlock(&gdev->reg_mutex);
put_device(&gdev->dev);
ret = sysfs_create_group(&chp->dev.kobj, &chp_attr_group);
if (ret) {
device_unregister(&chp->dev);
- goto out_free;
+ goto out;
}
mutex_lock(&channel_subsystems[chpid.cssid]->mutex);
if (channel_subsystems[chpid.cssid]->cm_enabled) {
sysfs_remove_group(&chp->dev.kobj, &chp_attr_group);
device_unregister(&chp->dev);
mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
- goto out_free;
+ goto out;
}
}
channel_subsystems[chpid.cssid]->chps[chpid.id] = chp;
mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
- return ret;
+ goto out;
out_free:
kfree(chp);
+out:
return ret;
}
CIO_TRACE_EVENT(4, sch->dev.bus_id);
orb = &to_io_private(sch)->orb;
+ memset(orb, 0, sizeof(union orb));
/* sch is always under 2G. */
orb->cmd.intparm = (u32)(addr_t)sch;
orb->cmd.fmt = 1;
case 1: /* status pending */
case 2: /* busy */
return -EBUSY;
- default: /* device/path not operational */
+ case 3: /* device/path not operational */
return cio_start_handle_notoper(sch, lpm);
+ default:
+ return ccode;
}
}
css = to_css(dev);
mutex_destroy(&css->mutex);
+ if (css->pseudo_subchannel) {
+ /* Implies that it has been generated but never registered. */
+ css_subchannel_release(&css->pseudo_subchannel->dev);
+ css->pseudo_subchannel = NULL;
+ }
kfree(css);
}
}
channel_subsystems[i] = css;
ret = setup_css(i);
- if (ret)
- goto out_free;
+ if (ret) {
+ kfree(channel_subsystems[i]);
+ goto out_unregister;
+ }
ret = device_register(&css->device);
- if (ret)
- goto out_free_all;
+ if (ret) {
+ put_device(&css->device);
+ goto out_unregister;
+ }
if (css_chsc_characteristics.secm) {
ret = device_create_file(&css->device,
&dev_attr_cm_enable);
}
ret = register_reboot_notifier(&css_reboot_notifier);
if (ret)
- goto out_pseudo;
+ goto out_unregister;
css_init_done = 1;
/* Enable default isc for I/O subchannels. */
for_each_subchannel(__init_channel_subsystem, NULL);
return 0;
-out_pseudo:
- device_unregister(&channel_subsystems[i]->pseudo_subchannel->dev);
out_file:
- device_remove_file(&channel_subsystems[i]->device,
- &dev_attr_cm_enable);
+ if (css_chsc_characteristics.secm)
+ device_remove_file(&channel_subsystems[i]->device,
+ &dev_attr_cm_enable);
out_device:
device_unregister(&channel_subsystems[i]->device);
-out_free_all:
- kfree(channel_subsystems[i]->pseudo_subchannel->lock);
- kfree(channel_subsystems[i]->pseudo_subchannel);
-out_free:
- kfree(channel_subsystems[i]);
out_unregister:
while (i > 0) {
struct channel_subsystem *css;
i--;
css = channel_subsystems[i];
device_unregister(&css->pseudo_subchannel->dev);
+ css->pseudo_subchannel = NULL;
if (css_chsc_characteristics.secm)
device_remove_file(&css->device,
&dev_attr_cm_enable);
{
struct subchannel *sch;
+ /* Allow ccw_device_offline while disconnected. */
+ if (cdev->private->state == DEV_STATE_DISCONNECTED ||
+ cdev->private->state == DEV_STATE_NOT_OPER) {
+ cdev->private->flags.donotify = 0;
+ ccw_device_done(cdev, DEV_STATE_NOT_OPER);
+ return 0;
+ }
if (ccw_device_is_orphan(cdev)) {
ccw_device_done(cdev, DEV_STATE_OFFLINE);
return 0;
{
char s[80];
- sprintf(s, "%s sc:%x ", cdev->dev.bus_id, irq_ptr->schid.sch_no);
-
+ sprintf(s, "qdio: %s ", dev_name(&cdev->dev));
switch (irq_ptr->qib.qfmt) {
case QDIO_QETH_QFMT:
- sprintf(s + strlen(s), "OSADE ");
+ sprintf(s + strlen(s), "OSA ");
break;
case QDIO_ZFCP_QFMT:
sprintf(s + strlen(s), "ZFCP ");
break;
case QDIO_IQDIO_QFMT:
- sprintf(s + strlen(s), "HiperSockets ");
+ sprintf(s + strlen(s), "HS ");
break;
}
- sprintf(s + strlen(s), "using: ");
-
- if (!is_thinint_irq(irq_ptr))
- sprintf(s + strlen(s), "no");
- sprintf(s + strlen(s), "AdapterInterrupts ");
- if (!(irq_ptr->sch_token != 0))
- sprintf(s + strlen(s), "no");
- sprintf(s + strlen(s), "QEBSM ");
- if (!(irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED))
- sprintf(s + strlen(s), "no");
- sprintf(s + strlen(s), "OutboundPCI ");
- if (!css_general_characteristics.aif_tdd)
- sprintf(s + strlen(s), "no");
- sprintf(s + strlen(s), "TDD\n");
- printk(KERN_INFO "qdio: %s", s);
-
- memset(s, 0, sizeof(s));
- sprintf(s, "%s SIGA required: ", cdev->dev.bus_id);
- if (irq_ptr->siga_flag.input)
- sprintf(s + strlen(s), "Read ");
- if (irq_ptr->siga_flag.output)
- sprintf(s + strlen(s), "Write ");
- if (irq_ptr->siga_flag.sync)
- sprintf(s + strlen(s), "Sync ");
- if (!irq_ptr->siga_flag.no_sync_ti)
- sprintf(s + strlen(s), "SyncAI ");
- if (!irq_ptr->siga_flag.no_sync_out_ti)
- sprintf(s + strlen(s), "SyncOutAI ");
- if (!irq_ptr->siga_flag.no_sync_out_pci)
- sprintf(s + strlen(s), "SyncOutPCI");
+ sprintf(s + strlen(s), "on SC %x using ", irq_ptr->schid.sch_no);
+ sprintf(s + strlen(s), "AI:%d ", is_thinint_irq(irq_ptr));
+ sprintf(s + strlen(s), "QEBSM:%d ", (irq_ptr->sch_token) ? 1 : 0);
+ sprintf(s + strlen(s), "PCI:%d ",
+ (irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED) ? 1 : 0);
+ sprintf(s + strlen(s), "TDD:%d ", css_general_characteristics.aif_tdd);
+ sprintf(s + strlen(s), "SIGA:");
+ sprintf(s + strlen(s), "%s", (irq_ptr->siga_flag.input) ? "R" : " ");
+ sprintf(s + strlen(s), "%s", (irq_ptr->siga_flag.output) ? "W" : " ");
+ sprintf(s + strlen(s), "%s", (irq_ptr->siga_flag.sync) ? "S" : " ");
+ sprintf(s + strlen(s), "%s",
+ (!irq_ptr->siga_flag.no_sync_ti) ? "A" : " ");
+ sprintf(s + strlen(s), "%s",
+ (!irq_ptr->siga_flag.no_sync_out_ti) ? "O" : " ");
+ sprintf(s + strlen(s), "%s",
+ (!irq_ptr->siga_flag.no_sync_out_pci) ? "P" : " ");
sprintf(s + strlen(s), "\n");
- printk(KERN_INFO "qdio: %s", s);
+ printk(KERN_INFO "%s", s);
}
int __init qdio_setup_init(void)
static inline void
claw_set_busy(struct net_device *dev)
{
- ((struct claw_privbk *) dev->priv)->tbusy=1;
+ ((struct claw_privbk *)dev->ml_priv)->tbusy = 1;
eieio();
}
static inline void
claw_clear_busy(struct net_device *dev)
{
- clear_bit(0, &(((struct claw_privbk *) dev->priv)->tbusy));
+ clear_bit(0, &(((struct claw_privbk *) dev->ml_priv)->tbusy));
netif_wake_queue(dev);
eieio();
}
claw_check_busy(struct net_device *dev)
{
eieio();
- return ((struct claw_privbk *) dev->priv)->tbusy;
+ return ((struct claw_privbk *) dev->ml_priv)->tbusy;
}
static inline void
claw_setbit_busy(int nr,struct net_device *dev)
{
netif_stop_queue(dev);
- set_bit(nr, (void *)&(((struct claw_privbk *)dev->priv)->tbusy));
+ set_bit(nr, (void *)&(((struct claw_privbk *)dev->ml_priv)->tbusy));
}
static inline void
claw_clearbit_busy(int nr,struct net_device *dev)
{
- clear_bit(nr,(void *)&(((struct claw_privbk *)dev->priv)->tbusy));
+ clear_bit(nr, (void *)&(((struct claw_privbk *)dev->ml_priv)->tbusy));
netif_wake_queue(dev);
}
{
netif_stop_queue(dev);
return test_and_set_bit(nr,
- (void *)&(((struct claw_privbk *) dev->priv)->tbusy));
+ (void *)&(((struct claw_privbk *) dev->ml_priv)->tbusy));
}
if (!get_device(&cgdev->dev))
return -ENODEV;
privptr = kzalloc(sizeof(struct claw_privbk), GFP_KERNEL);
+ cgdev->dev.driver_data = privptr;
if (privptr == NULL) {
probe_error(cgdev);
put_device(&cgdev->dev);
privptr->p_env->p_priv = privptr;
cgdev->cdev[0]->handler = claw_irq_handler;
cgdev->cdev[1]->handler = claw_irq_handler;
- cgdev->dev.driver_data = privptr;
CLAW_DBF_TEXT(2, setup, "prbext 0");
return 0;
claw_tx(struct sk_buff *skb, struct net_device *dev)
{
int rc;
- struct claw_privbk *privptr=dev->priv;
+ struct claw_privbk *privptr = dev->ml_priv;
unsigned long saveflags;
struct chbk *p_ch;
static int
claw_change_mtu(struct net_device *dev, int new_mtu)
{
- struct claw_privbk *privptr=dev->priv;
+ struct claw_privbk *privptr = dev->ml_priv;
int buff_size;
CLAW_DBF_TEXT(4, trace, "setmtu");
buff_size = privptr->p_env->write_size;
struct ccwbk *p_buf;
CLAW_DBF_TEXT(4, trace, "open");
- privptr = (struct claw_privbk *)dev->priv;
+ privptr = (struct claw_privbk *)dev->ml_priv;
/* allocate and initialize CCW blocks */
if (privptr->buffs_alloc == 0) {
rc=init_ccw_bk(dev);
p_ch = (struct chbk *) data;
dev = (struct net_device *)p_ch->ndev;
CLAW_DBF_TEXT(4, trace, "IRQtask");
- privptr = (struct claw_privbk *) dev->priv;
+ privptr = (struct claw_privbk *)dev->ml_priv;
unpack_read(dev);
clear_bit(CLAW_BH_ACTIVE, (void *)&p_ch->flag_a);
CLAW_DBF_TEXT(4, trace, "TskletXt");
if (!dev)
return 0;
- privptr = (struct claw_privbk *) dev->priv;
+ privptr = (struct claw_privbk *)dev->ml_priv;
if (!privptr)
return 0;
CLAW_DBF_TEXT(4, trace, "release");
if (p_ch->claw_state == CLAW_STOP)
return;
dev = (struct net_device *) p_ch->ndev;
- privptr = (struct claw_privbk *) dev->priv;
+ privptr = (struct claw_privbk *) dev->ml_priv;
claw_free_wrt_buf( dev );
if ((privptr->write_free_count > 0) &&
!skb_queue_empty(&p_ch->collect_queue)) {
struct ccw1 temp_ccw;
struct endccw * p_end;
CLAW_DBF_TEXT(4, trace, "addreads");
- privptr = dev->priv;
+ privptr = dev->ml_priv;
p_end = privptr->p_end_ccw;
/* first CCW and last CCW contains a new set of read channel programs
int rc=0;
CLAW_DBF_TEXT(2, setup, "findlink");
- privptr=dev->priv;
+ privptr = dev->ml_priv;
p_env=privptr->p_env;
switch (p_env->packing)
{
struct chbk *ch;
CLAW_DBF_TEXT(4, trace, "hw_tx");
- privptr = (struct claw_privbk *) (dev->priv);
+ privptr = (struct claw_privbk *)(dev->ml_priv);
p_ch=(struct chbk *)&privptr->channel[WRITE];
p_env =privptr->p_env;
claw_free_wrt_buf(dev); /* Clean up free chain if posible */
struct ccwbk*p_last_CCWB;
struct ccwbk*p_first_CCWB;
struct endccw *p_endccw=NULL;
- addr_t real_address;
- struct claw_privbk *privptr=dev->priv;
+ addr_t real_address;
+ struct claw_privbk *privptr = dev->ml_priv;
struct clawh *pClawH=NULL;
addr_t real_TIC_address;
int i,j;
static void
probe_error( struct ccwgroup_device *cgdev)
{
- struct claw_privbk *privptr;
+ struct claw_privbk *privptr;
CLAW_DBF_TEXT(4, trace, "proberr");
- privptr=(struct claw_privbk *)cgdev->dev.driver_data;
- if (privptr!=NULL) {
+ privptr = (struct claw_privbk *) cgdev->dev.driver_data;
+ if (privptr != NULL) {
+ cgdev->dev.driver_data = NULL;
kfree(privptr->p_env);
- privptr->p_env=NULL;
- kfree(privptr->p_mtc_envelope);
- privptr->p_mtc_envelope=NULL;
- kfree(privptr);
- privptr=NULL;
- }
- return;
+ kfree(privptr->p_mtc_envelope);
+ kfree(privptr);
+ }
} /* probe_error */
/*-------------------------------------------------------------------*
CLAW_DBF_TEXT(2, setup, "clw_cntl");
udelay(1000); /* Wait a ms for the control packets to
*catch up to each other */
- privptr=dev->priv;
+ privptr = dev->ml_priv;
p_env=privptr->p_env;
tdev = &privptr->channel[READ].cdev->dev;
memcpy( &temp_host_name, p_env->host_name, 8);
struct sk_buff *skb;
CLAW_DBF_TEXT(2, setup, "sndcntl");
- privptr=dev->priv;
+ privptr = dev->ml_priv;
p_ctl=(struct clawctl *)&privptr->ctl_bk;
p_ctl->command=type;
claw_snd_conn_req(struct net_device *dev, __u8 link)
{
int rc;
- struct claw_privbk *privptr=dev->priv;
+ struct claw_privbk *privptr = dev->ml_priv;
struct clawctl *p_ctl;
CLAW_DBF_TEXT(2, setup, "snd_conn");
int rc;
CLAW_DBF_TEXT(2, setup, "chkresp");
- privptr = dev->priv;
+ privptr = dev->ml_priv;
p_env=privptr->p_env;
rc=claw_send_control(dev, SYSTEM_VALIDATE_RESPONSE,
p_ctl->linkid,
struct claw_privbk *privptr;
CLAW_DBF_TEXT(4, trace, "stats");
- privptr = dev->priv;
+ privptr = dev->ml_priv;
return &privptr->stats;
} /* end of claw_stats */
p_last_ccw=NULL;
p_packh=NULL;
p_packd=NULL;
- privptr=dev->priv;
+ privptr = dev->ml_priv;
p_dev = &privptr->channel[READ].cdev->dev;
p_env = privptr->p_env;
int rc = 0;
__u32 parm;
unsigned long saveflags = 0;
- struct claw_privbk *privptr=dev->priv;
+ struct claw_privbk *privptr = dev->ml_priv;
struct ccwbk*p_ccwbk;
struct chbk *p_ch;
struct clawh *p_clawh;
if (!dev) {
return;
}
- privptr=(struct claw_privbk *)dev->priv;
+ privptr = (struct claw_privbk *)dev->ml_priv;
p_ch=&privptr->channel[WRITE];
CLAW_DBF_TEXT(4, trace, "strt_io");
claw_free_wrt_buf( struct net_device *dev )
{
- struct claw_privbk *privptr=(struct claw_privbk *)dev->priv;
+ struct claw_privbk *privptr = (struct claw_privbk *)dev->ml_priv;
struct ccwbk*p_first_ccw;
struct ccwbk*p_last_ccw;
struct ccwbk*p_this_ccw;
if (!dev)
return;
CLAW_DBF_TEXT_(2, setup, "%s", dev->name);
- privptr = dev->priv;
+ privptr = dev->ml_priv;
if (dev->flags & IFF_RUNNING)
claw_release(dev);
if (privptr) {
privptr->channel[READ].ndev = NULL; /* say it's free */
}
- dev->priv=NULL;
+ dev->ml_priv = NULL;
#ifdef MODULE
if (free_dev) {
free_netdev(dev);
printk(KERN_WARNING "%s:alloc_netdev failed\n",__func__);
goto out;
}
- dev->priv = privptr;
+ dev->ml_priv = privptr;
cgdev->dev.driver_data = privptr;
cgdev->cdev[READ]->dev.driver_data = privptr;
cgdev->cdev[WRITE]->dev.driver_data = privptr;
ret = claw_release(ndev);
ndev->flags &=~IFF_RUNNING;
unregister_netdev(ndev);
- ndev->priv = NULL; /* cgdev data, not ndev's to free */
+ ndev->ml_priv = NULL; /* cgdev data, not ndev's to free */
claw_free_netdevice(ndev, 1);
priv->channel[READ].ndev = NULL;
priv->channel[WRITE].ndev = NULL;
{
struct channel *ch = arg;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct sk_buff *skb;
int first = 1;
int i;
{
struct channel *ch = arg;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
CTCM_PR_DEBUG("%s(%s): %s\n", __func__, ch->id, dev->name);
{
struct channel *ch = arg;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
int len = ch->max_bufsize - ch->irb->scsw.cmd.count;
struct sk_buff *skb = ch->trans_skb;
__u16 block_len = *((__u16 *)skb->data);
chx_rxidle(fi, event, arg);
} else {
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
fsm_newstate(fi, CTC_STATE_TXIDLE);
fsm_event(priv->fsm, DEV_EVENT_TXUP, dev);
}
if ((CHANNEL_DIRECTION(ch->flags) == READ) &&
(ch->protocol == CTCM_PROTO_S390)) {
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
fsm_event(priv->fsm, DEV_EVENT_RXUP, dev);
}
}
{
struct channel *ch = arg;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
__u16 buflen;
int rc;
struct channel *ch)
{
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
CTCM_DBF_TEXT_(SETUP, CTC_DBF_NOTICE,
"%s(%s): %s[%d]\n",
{
struct channel *ch = arg;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
/*
* Special case: Got UC_RCRESET on setmode.
{
struct channel *ch = arg;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
if (event == CTC_EVENT_TIMER) {
if (!IS_MPCDEV(dev))
{
struct channel *ch = arg;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
"%s(%s): RX %s busy, init. fail",
struct channel *ch = arg;
struct channel *ch2;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
CTCM_DBF_TEXT_(TRACE, CTC_DBF_NOTICE,
"%s: %s: remote disconnect - re-init ...",
{
struct channel *ch = arg;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
if (event == CTC_EVENT_TIMER) {
fsm_deltimer(&ch->timer);
{
struct channel *ch = arg;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct sk_buff *skb;
CTCM_PR_DEBUG("Enter: %s: cp=%i ch=0x%p id=%s\n",
{
struct channel *ch = arg;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
int rd = CHANNEL_DIRECTION(ch->flags);
fsm_deltimer(&ch->timer);
{
struct channel *ch = arg;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
struct sk_buff *skb;
int first = 1;
{
struct channel *ch = arg;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
struct sk_buff *skb = ch->trans_skb;
struct sk_buff *new_skb;
{
struct channel *ch = arg;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *gptr = priv->mpcg;
CTCM_PR_DEBUG("Enter %s: id=%s, ch=0x%p\n",
{
struct channel *ch = arg;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
int rc;
unsigned long saveflags = 0; /* avoids compiler warning */
{
struct channel *ch = arg;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
CTCM_PR_DEBUG("%s(%s): %s(ch=0x%p), cp=%i, ChStat:%s, GrpStat:%s\n",
{
struct channel *ch = arg;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
CTCM_PR_DEBUG("%s(%s): %s\n ChState:%s GrpState:%s\n",
{
struct channel *ch = arg;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
fsm_event(grp->fsm, MPCG_EVENT_XID0DO, ch);
{
struct channel *ach = arg;
struct net_device *dev = ach->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
struct channel *wch = priv->channel[WRITE];
struct channel *rch = priv->channel[READ];
static void dev_action_start(fsm_instance *fi, int event, void *arg)
{
struct net_device *dev = arg;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
int direction;
CTCMY_DBF_DEV_NAME(SETUP, dev, "");
{
int direction;
struct net_device *dev = arg;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
CTCMY_DBF_DEV_NAME(SETUP, dev, "");
{
int restart_timer;
struct net_device *dev = arg;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
CTCMY_DBF_DEV_NAME(TRACE, dev, "");
static void dev_action_chup(fsm_instance *fi, int event, void *arg)
{
struct net_device *dev = arg;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
int dev_stat = fsm_getstate(fi);
CTCM_DBF_TEXT_(SETUP, CTC_DBF_NOTICE,
"%s(%s): priv = %p [%d,%d]\n ", CTCM_FUNTAIL,
- dev->name, dev->priv, dev_stat, event);
+ dev->name, dev->ml_priv, dev_stat, event);
switch (fsm_getstate(fi)) {
case DEV_STATE_STARTWAIT_RXTX:
{
struct net_device *dev = arg;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
CTCMY_DBF_DEV_NAME(SETUP, dev, "");
void ctcm_unpack_skb(struct channel *ch, struct sk_buff *pskb)
{
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
__u16 len = *((__u16 *) pskb->data);
skb_put(pskb, 2 + LL_HEADER_LENGTH);
*/
int ctcm_open(struct net_device *dev)
{
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
CTCMY_DBF_DEV_NAME(SETUP, dev, "");
if (!IS_MPC(priv))
*/
int ctcm_close(struct net_device *dev)
{
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
CTCMY_DBF_DEV_NAME(SETUP, dev, "");
if (!IS_MPC(priv))
skb_pull(skb, LL_HEADER_LENGTH + 2);
} else if (ccw_idx == 0) {
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
priv->stats.tx_packets++;
priv->stats.tx_bytes += skb->len - LL_HEADER_LENGTH;
}
struct channel *ch;
/* int rc = 0; */
- priv = dev->priv;
+ priv = dev->ml_priv;
grp = priv->mpcg;
ch = priv->channel[WRITE];
{
struct pdu *p_header;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
struct th_header *header;
struct sk_buff *nskb;
/* first merge version - leaving both functions separated */
static int ctcm_tx(struct sk_buff *skb, struct net_device *dev)
{
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
if (skb == NULL) {
CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
static int ctcmpc_tx(struct sk_buff *skb, struct net_device *dev)
{
int len = 0;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
struct sk_buff *newskb = NULL;
if (new_mtu < 576 || new_mtu > 65527)
return -EINVAL;
- priv = dev->priv;
+ priv = dev->ml_priv;
max_bufsize = priv->channel[READ]->max_bufsize;
if (IS_MPC(priv)) {
*/
static struct net_device_stats *ctcm_stats(struct net_device *dev)
{
- return &((struct ctcm_priv *)dev->priv)->stats;
+ return &((struct ctcm_priv *)dev->ml_priv)->stats;
}
static void ctcm_free_netdevice(struct net_device *dev)
CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO,
"%s(%s)", CTCM_FUNTAIL, dev->name);
- priv = dev->priv;
+ priv = dev->ml_priv;
if (priv) {
grp = priv->mpcg;
if (grp) {
CTCM_FUNTAIL);
return NULL;
}
- dev->priv = priv;
+ dev->ml_priv = priv;
priv->fsm = init_fsm("ctcmdev", dev_state_names, dev_event_names,
CTCM_NR_DEV_STATES, CTCM_NR_DEV_EVENTS,
dev_fsm, dev_fsm_len, GFP_KERNEL);
*/
static inline void ctcm_clear_busy_do(struct net_device *dev)
{
- clear_bit(0, &(((struct ctcm_priv *)dev->priv)->tbusy));
+ clear_bit(0, &(((struct ctcm_priv *)dev->ml_priv)->tbusy));
netif_wake_queue(dev);
}
static inline void ctcm_clear_busy(struct net_device *dev)
{
struct mpc_group *grp;
- grp = ((struct ctcm_priv *)dev->priv)->mpcg;
+ grp = ((struct ctcm_priv *)dev->ml_priv)->mpcg;
if (!(grp && grp->in_sweep))
ctcm_clear_busy_do(dev);
static inline int ctcm_test_and_set_busy(struct net_device *dev)
{
netif_stop_queue(dev);
- return test_and_set_bit(0, &(((struct ctcm_priv *)dev->priv)->tbusy));
+ return test_and_set_bit(0,
+ &(((struct ctcm_priv *)dev->ml_priv)->tbusy));
}
extern int loglevel;
#define IS_MPC(p) ((p)->protocol == CTCM_PROTO_MPC)
/* test if struct ctcm_priv of struct net_device has MPC protocol setting */
-#define IS_MPCDEV(d) IS_MPC((struct ctcm_priv *)d->priv)
+#define IS_MPCDEV(dev) IS_MPC((struct ctcm_priv *)dev->ml_priv)
static inline gfp_t gfp_type(void)
{
CTCM_FUNTAIL, device);
return NULL;
}
- priv = dev->priv;
+ priv = dev->ml_priv;
if (priv == NULL) {
CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
- "%s(%s): dev->priv is NULL",
+ "%s(%s): dev->ml_priv is NULL",
CTCM_FUNTAIL, device);
return NULL;
}
dev = ctcmpc_get_dev(port_num);
if (dev == NULL)
return 1;
- priv = dev->priv;
+ priv = dev->ml_priv;
grp = priv->mpcg;
grp->allochanfunc = callback;
dev = ctcmpc_get_dev(port_num);
if (dev == NULL)
return;
- priv = dev->priv;
+ priv = dev->ml_priv;
grp = priv->mpcg;
rch = priv->channel[READ];
wch = priv->channel[WRITE];
dev = ctcmpc_get_dev(port_num);
if (dev == NULL)
return;
- priv = dev->priv;
+ priv = dev->ml_priv;
grp = priv->mpcg;
CTCM_DBF_TEXT_(MPC_SETUP, CTC_DBF_DEBUG,
dev = ctcmpc_get_dev(port_num);
if (dev == NULL)
return;
- priv = dev->priv;
+ priv = dev->ml_priv;
grp = priv->mpcg;
CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_DEBUG,
{
struct channel *rch = mpcginfo->ch;
struct net_device *dev = rch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
struct channel *ch = priv->channel[WRITE];
static void ctcmpc_send_sweep_resp(struct channel *rch)
{
struct net_device *dev = rch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
int rc = 0;
struct th_sweep *header;
{
struct channel *rch = mpcginfo->ch;
struct net_device *dev = rch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
struct channel *ch = priv->channel[WRITE];
static void mpc_action_go_ready(fsm_instance *fsm, int event, void *arg)
{
struct net_device *dev = arg;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
if (grp == NULL) {
void mpc_group_ready(unsigned long adev)
{
struct net_device *dev = (struct net_device *)adev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
struct channel *ch = NULL;
void mpc_channel_action(struct channel *ch, int direction, int action)
{
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
if (grp == NULL) {
static void ctcmpc_unpack_skb(struct channel *ch, struct sk_buff *pskb)
{
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
struct pdu *curr_pdu;
struct mpcg_info *mpcginfo;
struct channel *ch = (struct channel *)thischan;
struct sk_buff *skb;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
CTCM_PR_DEBUG("%s cp:%i enter: %s() %s\n",
BUG_ON(dev == NULL);
CTCM_PR_DEBUG("Enter %s: %s\n", __func__, dev->name);
- priv = dev->priv;
+ priv = dev->ml_priv;
grp = priv->mpcg;
grp->flow_off_called = 0;
fsm_deltimer(&grp->timer);
BUG_ON(dev == NULL);
- priv = dev->priv;
+ priv = dev->ml_priv;
grp = priv->mpcg;
wch = priv->channel[WRITE];
rch = priv->channel[READ];
if (ch) {
dev = ch->netdev;
if (dev) {
- priv = dev->priv;
+ priv = dev->ml_priv;
if (priv) {
CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_NOTICE,
"%s: %s: %s\n",
{
struct channel *ch = mpcginfo->ch;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
struct xid2 *xid = mpcginfo->xid;
int rc = 0;
{
struct channel *ch = arg;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
CTCM_PR_DEBUG("Enter %s: cp=%i ch=0x%p id=%s\n",
static void mpc_action_doxid7(fsm_instance *fsm, int event, void *arg)
{
struct net_device *dev = arg;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = NULL;
int direction;
int send = 0;
struct mpcg_info *mpcginfo = arg;
struct channel *ch = mpcginfo->ch;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
CTCM_PR_DEBUG("%s: ch-id:%s xid2:%i xid7:%i xidt_p2:%i \n",
struct mpcg_info *mpcginfo = arg;
struct channel *ch = mpcginfo->ch;
struct net_device *dev = ch->netdev;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
CTCM_PR_DEBUG("Enter %s: cp=%i ch=0x%p id=%s\n",
__u32 new_len = 0;
struct sk_buff *skb;
struct qllc *qllcptr;
- struct ctcm_priv *priv = dev->priv;
+ struct ctcm_priv *priv = dev->ml_priv;
struct mpc_group *grp = priv->mpcg;
CTCM_PR_DEBUG("%s: GROUP STATE: %s\n",
}
/* How far in the ccw chain have we processed? */
if ((channel->state != LCS_CH_STATE_INIT) &&
- (irb->scsw.cmd.fctl & SCSW_FCTL_START_FUNC)) {
+ (irb->scsw.cmd.fctl & SCSW_FCTL_START_FUNC) &&
+ (irb->scsw.cmd.cpa != 0)) {
index = (struct ccw1 *) __va((addr_t) irb->scsw.cmd.cpa)
- channel->ccws;
if ((irb->scsw.cmd.actl & SCSW_ACTL_SUSPENDED) ||
struct list_head list;
__u8 mc_addr[MAX_ADDR_LEN];
unsigned char mc_addrlen;
+ int is_vmac;
};
struct qeth_card {
struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill,
int offset)
{
- int length = skb->len;
+ int length = skb->len - offset;
int length_here;
int element;
char *data;
qeth_l2_send_delgroupmac_cb);
}
-static void qeth_l2_add_mc(struct qeth_card *card, __u8 *mac)
+static void qeth_l2_add_mc(struct qeth_card *card, __u8 *mac, int vmac)
{
struct qeth_mc_mac *mc;
+ int rc;
mc = kmalloc(sizeof(struct qeth_mc_mac), GFP_ATOMIC);
memcpy(mc->mc_addr, mac, OSA_ADDR_LEN);
mc->mc_addrlen = OSA_ADDR_LEN;
+ mc->is_vmac = vmac;
+
+ if (vmac) {
+ rc = qeth_l2_send_setdelmac(card, mac, IPA_CMD_SETVMAC,
+ NULL);
+ } else {
+ rc = qeth_l2_send_setgroupmac(card, mac);
+ }
- if (!qeth_l2_send_setgroupmac(card, mac))
+ if (!rc)
list_add_tail(&mc->list, &card->mc_list);
else
kfree(mc);
spin_lock_bh(&card->mclock);
list_for_each_entry_safe(mc, tmp, &card->mc_list, list) {
- qeth_l2_send_delgroupmac(card, mc->mc_addr);
+ if (mc->is_vmac)
+ qeth_l2_send_setdelmac(card, mc->mc_addr,
+ IPA_CMD_DELVMAC, NULL);
+ else
+ qeth_l2_send_delgroupmac(card, mc->mc_addr);
list_del(&mc->list);
kfree(mc);
}
static void qeth_l2_set_multicast_list(struct net_device *dev)
{
struct qeth_card *card = dev->ml_priv;
- struct dev_mc_list *dm;
+ struct dev_addr_list *dm;
if (card->info.type == QETH_CARD_TYPE_OSN)
return ;
qeth_l2_del_all_mc(card);
spin_lock_bh(&card->mclock);
for (dm = dev->mc_list; dm; dm = dm->next)
- qeth_l2_add_mc(card, dm->dmi_addr);
+ qeth_l2_add_mc(card, dm->da_addr, 0);
+
+ for (dm = dev->uc_list; dm; dm = dm->next)
+ qeth_l2_add_mc(card, dm->da_addr, 1);
+
spin_unlock_bh(&card->mclock);
if (!qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE))
return;
return -EINVAL;
if (!qeth_is_supported(card, IPA_IPV6)) {
- return -ENOTSUPP;
+ return -EOPNOTSUPP;
}
return qeth_l3_dev_route_store(card, &card->options.route6,
*/
static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event)
{
- struct zfcp_adapter *adapter;
+ struct zfcp_adapter *adapter = dev_get_drvdata(&ccw_device->dev);
- down(&zfcp_data.config_sema);
- adapter = dev_get_drvdata(&ccw_device->dev);
switch (event) {
case CIO_GONE:
dev_warn(&adapter->ccw_device->dev, "device gone\n");
89, NULL);
break;
}
- zfcp_erp_wait(adapter);
- up(&zfcp_data.config_sema);
return 1;
}
struct scatterlist sg_resp[ZFCP_GPN_FT_BUFFERS];
};
-static struct zfcp_port *zfcp_get_port_by_did(struct zfcp_adapter *adapter,
- u32 d_id)
-{
- struct zfcp_port *port;
-
- list_for_each_entry(port, &adapter->port_list_head, list)
- if ((port->d_id == d_id) &&
- !atomic_test_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status))
- return port;
- return NULL;
-}
-
static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
struct fcp_rscn_element *elem)
{
zfcp_port_get(port);
retval = zfcp_fc_adisc(port);
- if (retval == 0 || retval == -EBUSY)
+ if (retval == 0)
return;
/* send of ADISC was not possible */
zfcp_port_put(port);
- zfcp_erp_port_forced_reopen(port, 0, 65, NULL);
+ if (retval != -EBUSY)
+ zfcp_erp_port_forced_reopen(port, 0, 65, NULL);
}
static int zfcp_scan_get_nameserver(struct zfcp_adapter *adapter)
if (ret)
return ret;
zfcp_erp_wait(adapter);
- zfcp_port_put(adapter->nameserver_port);
}
return !atomic_test_mask(ZFCP_STATUS_COMMON_UNBLOCKED,
&adapter->nameserver_port->status);
struct zfcp_adapter *adapter = ct->port->adapter;
struct zfcp_port *port, *tmp;
u32 d_id;
- int ret = 0, x;
+ int ret = 0, x, last = 0;
if (ct->status)
return -EIO;
down(&zfcp_data.config_sema);
/* first entry is the header */
- for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES; x++) {
+ for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES && !last; x++) {
if (x % (ZFCP_GPN_FT_ENTRIES + 1))
acc++;
else
acc = sg_virt(++sg);
+ last = acc->control & 0x80;
d_id = acc->port_id[0] << 16 | acc->port_id[1] << 8 |
acc->port_id[2];
/* skip the adapter's port and known remote ports */
- if (acc->wwpn == fc_host_port_name(adapter->scsi_host) ||
- zfcp_get_port_by_did(adapter, d_id))
+ if (acc->wwpn == fc_host_port_name(adapter->scsi_host))
+ continue;
+ port = zfcp_get_port_by_wwpn(adapter, acc->wwpn);
+ if (port) {
+ zfcp_port_get(port);
continue;
+ }
port = zfcp_port_enqueue(adapter, acc->wwpn,
ZFCP_STATUS_PORT_DID_DID |
ret = PTR_ERR(port);
else
zfcp_erp_port_reopen(port, 0, 149, NULL);
- if (acc->control & 0x80) /* last entry */
- break;
}
zfcp_erp_wait(adapter);
static int zfcp_fsf_sbal_check(struct zfcp_qdio_queue *queue)
{
- spin_lock(&queue->lock);
+ spin_lock_bh(&queue->lock);
if (atomic_read(&queue->count))
return 1;
- spin_unlock(&queue->lock);
+ spin_unlock_bh(&queue->lock);
return 0;
}
long ret;
struct zfcp_qdio_queue *req_q = &adapter->req_q;
- spin_unlock(&req_q->lock);
+ spin_unlock_bh(&req_q->lock);
ret = wait_event_interruptible_timeout(adapter->request_wq,
zfcp_fsf_sbal_check(req_q), 5 * HZ);
if (ret > 0)
return 0;
- spin_lock(&req_q->lock);
+ spin_lock_bh(&req_q->lock);
return -EIO;
}
volatile struct qdio_buffer_element *sbale;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_UNSOLICITED_STATUS,
ZFCP_REQ_NO_QTCB,
adapter->pool.fsf_req_status_read);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
zfcp_fsf_req_free(req);
zfcp_hba_dbf_event_fsf_unsol("fail", adapter, NULL);
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND,
req_flags, adapter->pool.fsf_req_abort);
- if (unlikely(IS_ERR(req)))
+ if (IS_ERR(req))
goto out;
if (unlikely(!(atomic_read(&unit->status) &
struct zfcp_fsf_req *req;
int ret = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_GENERIC,
ZFCP_REQ_AUTO_CLEANUP, pool);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
ret = PTR_ERR(req);
goto out;
}
if (erp_action)
erp_action->fsf_req = NULL;
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return ret;
}
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_ELS,
ZFCP_REQ_AUTO_CLEANUP, NULL);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
ret = PTR_ERR(req);
goto out;
}
struct zfcp_adapter *adapter = erp_action->adapter;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (!atomic_read(&adapter->req_q.count))
goto out;
req = zfcp_fsf_req_create(adapter,
FSF_QTCB_EXCHANGE_CONFIG_DATA,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req = NULL;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA,
0, NULL);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
if (!retval)
wait_event(req->completion_wq,
req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT))
return -EOPNOTSUPP;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (!atomic_read(&adapter->req_q.count))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT))
return -EOPNOTSUPP;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (!atomic_read(&adapter->req_q.count))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, 0,
NULL);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
if (!retval)
wait_event(req->completion_wq,
req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
FSF_QTCB_OPEN_PORT_WITH_DID,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_PORT,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_PHYSICAL_PORT,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_OPEN_LUN,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_LUN,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags,
adapter->pool.fsf_req_scsi);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags,
adapter->pool.fsf_req_scsi);
- if (unlikely(IS_ERR(req)))
+ if (IS_ERR(req))
goto out;
req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT;
return ERR_PTR(-EINVAL);
}
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, fsf_cfdc->command, 0, NULL);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = -EPERM;
goto out;
}
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
if (!retval) {
wait_event(req->completion_wq,
/* clear QDIOUP flag, thus do_QDIO is not called during qdio_shutdown */
req_q = &adapter->req_q;
- spin_lock(&req_q->lock);
+ spin_lock_bh(&req_q->lock);
atomic_clear_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status);
- spin_unlock(&req_q->lock);
+ spin_unlock_bh(&req_q->lock);
qdio_shutdown(adapter->ccw_device, QDIO_FLAG_CLEANUP_USING_CLEAR);
config BLK_DEV_SD
tristate "SCSI disk support"
depends on SCSI
- select CRC_T10DIF
+ select CRC_T10DIF if BLK_DEV_INTEGRITY
---help---
If you want to use SCSI hard disks, Fibre Channel disks,
Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
/*
* LUN Not Accessible - ALUA state transition
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0b)
/*
* LUN Not Accessible -- Target port in standby state
/*
* Power On, Reset, or Bus Device Reset, just retry.
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) {
/*
* ALUA state changed
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
}
if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07) {
/*
* Implicit ALUA state transition failed
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
}
break;
}
if (!err)
return SCSI_DH_IO;
err = alua_check_sense(sdev, &sense_hdr);
- if (retry > 0 && err == NEEDS_RETRY) {
+ if (retry > 0 && err == ADD_TO_MLQUEUE) {
retry--;
goto retry;
}
return SCSI_DH_IO;
err = alua_check_sense(sdev, &sense_hdr);
- if (err == NEEDS_RETRY)
+ if (err == ADD_TO_MLQUEUE)
goto retry;
sdev_printk(KERN_INFO, sdev,
"%s: rtpg sense code %02x/%02x/%02x\n",
* Unit Attention Code. This is the first IO
* to the new path, so just retry.
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
break;
}
return SCSI_DH_IO;
err = clariion_check_sense(sdev, &sshdr);
- if (retry > 0 && err == NEEDS_RETRY) {
+ if (retry > 0 && err == ADD_TO_MLQUEUE) {
retry--;
goto retry;
}
*
* Just retry and wait.
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
break;
case ILLEGAL_REQUEST:
if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) {
/*
* Power On, Reset, or Bus Device Reset, just retry.
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
break;
}
/* success just means we do not care what scsi-ml does */
WRT_REG_WORD(®->isp.hccr, HCCR_CLR_HOST_INT);
}
spin_unlock_irq(&ha->hardware_lock);
- ha->isp_ops->enable_intrs(ha);
fail:
return ret;
if (ret)
goto probe_failed;
+ ha->isp_ops->enable_intrs(ha);
+
scsi_scan_host(host);
qla2x00_alloc_sysfs_attr(ha);
ds[i].d_count = sg_dma_len(s);
}
sg_count -= n;
+ sg = s;
}
} else {
cmd->dataseg[0].d_base = 0;
case HARDWARE_ERROR:
if (scmd->device->retry_hwerror)
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
else
return SUCCESS;
void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
{
int result = cmd->result;
- int this_count = scsi_bufflen(cmd);
+ int this_count;
struct request_queue *q = cmd->device->request_queue;
struct request *req = cmd->request;
int error = 0;
*/
if (scsi_end_request(cmd, error, good_bytes, result == 0) == NULL)
return;
+ this_count = blk_rq_bytes(req);
/* good_bytes = 0, or (inclusive) there were leftovers and
* result = 0, so scsi_end_request couldn't retry.
* PDT=1Fh none (no FDD connected to the requested logical unit)
*/
if (((result[0] >> 5) == 1 || starget->pdt_1f_for_no_lun) &&
- (result[0] & 0x1f) == 0x1f) {
+ (result[0] & 0x1f) == 0x1f &&
+ !scsi_is_wlun(lun)) {
SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
"scsi scan: peripheral device type"
" of 31, no device added\n"));
* kick the UART on a regular basis.
*/
if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
+ up->bugs |= UART_BUG_THRE;
pr_debug("ttyS%d - using backup timer\n", port->line);
- up->timer.function = serial8250_backup_timeout;
- up->timer.data = (unsigned long)up;
- mod_timer(&up->timer, jiffies +
- poll_timeout(up->port.timeout) + HZ / 5);
}
}
+ /*
+ * The above check will only give an accurate result the first time
+ * the port is opened so this value needs to be preserved.
+ */
+ if (up->bugs & UART_BUG_THRE) {
+ up->timer.function = serial8250_backup_timeout;
+ up->timer.data = (unsigned long)up;
+ mod_timer(&up->timer, jiffies +
+ poll_timeout(up->port.timeout) + HZ / 5);
+ }
+
/*
* If the "interrupt" for this port doesn't correspond with any
* hardware interrupt, we use a timer-based system. The original
#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
#define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */
+#define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */
#define PROBE_RSA (1 << 0)
#define PROBE_ANY (~0)
struct atmel_uart_port {
struct uart_port uart; /* uart */
struct clk *clk; /* uart clock */
- unsigned short suspended; /* is port suspended? */
+ int may_wakeup; /* cached value of device_may_wakeup for times we need to disable it */
+ u32 backup_imr; /* IMR saved during suspend */
int break_active; /* break being received */
short use_dma_rx; /* enable PDC receiver */
* This is called on uart_open() or a resume event.
*/
clk_enable(atmel_port->clk);
+
+ /* re-enable interrupts if we disabled some on suspend */
+ UART_PUT_IER(port, atmel_port->backup_imr);
break;
case 3:
+ /* Back up the interrupt mask and disable all interrupts */
+ atmel_port->backup_imr = UART_GET_IMR(port);
+ UART_PUT_IDR(port, -1);
+
/*
* Disable the peripheral clock for this serial port.
* This is called on uart_close() or a suspend event.
cpu_relax();
}
- if (device_may_wakeup(&pdev->dev)
- && !atmel_serial_clk_will_stop())
- enable_irq_wake(port->irq);
- else {
- uart_suspend_port(&atmel_uart, port);
- atmel_port->suspended = 1;
- }
+ /* we can not wake up if we're running on slow clock */
+ atmel_port->may_wakeup = device_may_wakeup(&pdev->dev);
+ if (atmel_serial_clk_will_stop())
+ device_set_wakeup_enable(&pdev->dev, 0);
+
+ uart_suspend_port(&atmel_uart, port);
return 0;
}
struct uart_port *port = platform_get_drvdata(pdev);
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- if (atmel_port->suspended) {
- uart_resume_port(&atmel_uart, port);
- atmel_port->suspended = 0;
- } else
- disable_irq_wake(port->irq);
+ uart_resume_port(&atmel_uart, port);
+ device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup);
return 0;
}
BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE));
port = &atmel_ports[pdev->id];
+ port->backup_imr = 0;
+
atmel_init_port(port, pdev);
if (!atmel_use_dma_rx(&port->uart)) {
#endif
#include <asm/gpio.h>
-#include <asm/mach/bfin_serial_5xx.h>
+#include <mach/bfin_serial_5xx.h>
#ifdef CONFIG_SERIAL_BFIN_DMA
#include <linux/dma-mapping.h>
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
-#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */
-#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */
+#ifdef CONFIG_ARCH_IMX
+#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */
+#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */
+#endif
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+#define UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */
+#endif
#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
#define UCR3_BPEN (1<<0) /* Preset registers enable */
#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
imx_txint(irq, dev_id);
- if (sts & USR1_RTSS)
+ if (sts & USR1_RTSD)
imx_rtsint(irq, dev_id);
return IRQ_HANDLED;
temp |= (UCR2_RXEN | UCR2_TXEN);
writel(temp, sport->port.membase + UCR2);
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+ temp = readl(sport->port.membase + UCR3);
+ temp |= UCR3_RXDMUXSEL;
+ writel(temp, sport->port.membase + UCR3);
+#endif
+
/*
* Enable modem status interrupts
*/
if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
sport->have_rtscts = 1;
- if (pdata->init)
- pdata->init(pdev);
+ if (pdata->init) {
+ ret = pdata->init(pdev);
+ if (ret)
+ goto clkput;
+ }
uart_add_one_port(&imx_reg, &sport->port);
platform_set_drvdata(pdev, &sport->port);
return 0;
+clkput:
+ clk_put(sport->clk);
+ clk_disable(sport->clk);
unmap:
iounmap(sport->port.membase);
free:
goto msg_rejected;
}
- if (t->speed_hz < orion_spi->min_speed) {
+ if (t->speed_hz && t->speed_hz < orion_spi->min_speed) {
dev_err(&spi->dev,
"message rejected : "
"device min speed (%d Hz) exceeds "
#define MAX_BUSES 3
-#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
-#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
-#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
+#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
+#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
+#define IS_DMA_ALIGNED(x) ((((u32)(x)) & 0x07) == 0)
+#define MAX_DMA_LEN 8191
/*
* for testing SSCR1 changes that require SSP restart, basically
size_t tx_map_len;
u8 n_bytes;
u32 dma_width;
- int cs_change;
int (*write)(struct driver_data *drv_data);
int (*read)(struct driver_data *drv_data);
irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
struct spi_transfer,
transfer_list);
+ /* Delay if requested before any change in chip select */
+ if (last_transfer->delay_usecs)
+ udelay(last_transfer->delay_usecs);
+
+ /* Drop chip select UNLESS cs_change is true or we are returning
+ * a message with an error, or next message is for another chip
+ */
if (!last_transfer->cs_change)
drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ else {
+ struct spi_message *next_msg;
+
+ /* Holding of cs was hinted, but we need to make sure
+ * the next message is for the same chip. Don't waste
+ * time with the following tests unless this was hinted.
+ *
+ * We cannot postpone this until pump_messages, because
+ * after calling msg->complete (below) the driver that
+ * sent the current message could be unloaded, which
+ * could invalidate the cs_control() callback...
+ */
+
+ /* get a pointer to the next message, if any */
+ spin_lock_irqsave(&drv_data->lock, flags);
+ if (list_empty(&drv_data->queue))
+ next_msg = NULL;
+ else
+ next_msg = list_entry(drv_data->queue.next,
+ struct spi_message, queue);
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+
+ /* see if the next and current messages point
+ * to the same chip
+ */
+ if (next_msg && next_msg->spi != msg->spi)
+ next_msg = NULL;
+ if (!next_msg || msg->state == ERROR_STATE)
+ drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ }
msg->state = NULL;
if (msg->complete)
msg->actual_length += drv_data->len -
(drv_data->rx_end - drv_data->rx);
- /* Release chip select if requested, transfer delays are
- * handled in pump_transfers */
- if (drv_data->cs_change)
- drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ /* Transfer delays and chip select release are
+ * handled in pump_transfers or giveback
+ */
/* Move to next transfer */
msg->state = next_transfer(drv_data);
drv_data->cur_msg->actual_length += drv_data->len -
(drv_data->rx_end - drv_data->rx);
- /* Release chip select if requested, transfer delays are
- * handled in pump_transfers */
- if (drv_data->cs_change)
- drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ /* Transfer delays and chip select release are
+ * handled in pump_transfers or giveback
+ */
/* Move to next transfer */
drv_data->cur_msg->state = next_transfer(drv_data);
return;
}
- /* Delay if requested at end of transfer*/
+ /* Delay if requested at end of transfer before CS change */
if (message->state == RUNNING_STATE) {
previous = list_entry(transfer->transfer_list.prev,
struct spi_transfer,
transfer_list);
if (previous->delay_usecs)
udelay(previous->delay_usecs);
+
+ /* Drop chip select only if cs_change is requested */
+ if (previous->cs_change)
+ drv_data->cs_control(PXA2XX_CS_DEASSERT);
}
- /* Check transfer length */
- if (transfer->len > 8191)
- {
- dev_warn(&drv_data->pdev->dev, "pump_transfers: transfer "
- "length greater than 8191\n");
- message->status = -EINVAL;
- giveback(drv_data);
- return;
+ /* Check for transfers that need multiple DMA segments */
+ if (transfer->len > MAX_DMA_LEN && chip->enable_dma) {
+
+ /* reject already-mapped transfers; PIO won't always work */
+ if (message->is_dma_mapped
+ || transfer->rx_dma || transfer->tx_dma) {
+ dev_err(&drv_data->pdev->dev,
+ "pump_transfers: mapped transfer length "
+ "of %u is greater than %d\n",
+ transfer->len, MAX_DMA_LEN);
+ message->status = -EINVAL;
+ giveback(drv_data);
+ return;
+ }
+
+ /* warn ... we force this to PIO mode */
+ if (printk_ratelimit())
+ dev_warn(&message->spi->dev, "pump_transfers: "
+ "DMA disabled for transfer length %ld "
+ "greater than %d\n",
+ (long)drv_data->len, MAX_DMA_LEN);
}
/* Setup the transfer state based on the type of transfer */
drv_data->len = transfer->len & DCMD_LENGTH;
drv_data->write = drv_data->tx ? chip->write : null_writer;
drv_data->read = drv_data->rx ? chip->read : null_reader;
- drv_data->cs_change = transfer->cs_change;
/* Change speed and bit per word on a per transfer */
cr0 = chip->cr0;
&dma_thresh))
if (printk_ratelimit())
dev_warn(&message->spi->dev,
- "pump_transfer: "
+ "pump_transfers: "
"DMA burst size reduced to "
"match bits_per_word\n");
}
message->state = RUNNING_STATE;
- /* Try to map dma buffer and do a dma transfer if successful */
- if ((drv_data->dma_mapped = map_dma_buffers(drv_data))) {
+ /* Try to map dma buffer and do a dma transfer if successful, but
+ * only if the length is non-zero and less than MAX_DMA_LEN.
+ *
+ * Zero-length non-descriptor DMA is illegal on PXA2xx; force use
+ * of PIO instead. Care is needed above because the transfer may
+ * have have been passed with buffers that are already dma mapped.
+ * A zero-length transfer in PIO mode will not try to write/read
+ * to/from the buffers
+ *
+ * REVISIT large transfers are exactly where we most want to be
+ * using DMA. If this happens much, split those transfers into
+ * multiple DMA segments rather than forcing PIO.
+ */
+ drv_data->dma_mapped = 0;
+ if (drv_data->len > 0 && drv_data->len <= MAX_DMA_LEN)
+ drv_data->dma_mapped = map_dma_buffers(drv_data);
+ if (drv_data->dma_mapped) {
/* Ensure we have the correct interrupt handler */
drv_data->transfer_handler = dma_transfer;
cs->hw_mode |= SPMODE_LEN(bits_per_word);
if ((mpc83xx_spi->spibrg / hz) > 64) {
+ cs->hw_mode |= SPMODE_DIV16;
pm = mpc83xx_spi->spibrg / (hz * 64);
if (pm > 16) {
- cs->hw_mode |= SPMODE_DIV16;
- pm /= 16;
- if (pm > 16) {
- dev_err(&spi->dev, "Requested speed is too "
- "low: %d Hz. Will use %d Hz instead.\n",
- hz, mpc83xx_spi->spibrg / 1024);
- pm = 16;
- }
+ dev_err(&spi->dev, "Requested speed is too "
+ "low: %d Hz. Will use %d Hz instead.\n",
+ hz, mpc83xx_spi->spibrg / 1024);
+ pm = 16;
}
} else
pm = mpc83xx_spi->spibrg / (hz * 4);
if (t->bits_per_word)
bits_per_word = t->bits_per_word;
len = t->len;
- if (bits_per_word > 8)
+ if (bits_per_word > 8) {
+ /* invalid length? */
+ if (len & 1)
+ return -EINVAL;
len /= 2;
- if (bits_per_word > 16)
+ }
+ if (bits_per_word > 16) {
+ /* invalid length? */
+ if (len & 1)
+ return -EINVAL;
len /= 2;
+ }
mpc83xx_spi->count = len;
+
INIT_COMPLETION(mpc83xx_spi->done);
/* enable rx ints */
#endif
MODULE_ALIAS("platform:s3c2410-spi");
-static struct platform_driver s3c24xx_spidrv = {
+static struct platform_driver s3c24xx_spi_driver = {
.remove = __exit_p(s3c24xx_spi_remove),
.suspend = s3c24xx_spi_suspend,
.resume = s3c24xx_spi_resume,
static int __init s3c24xx_spi_init(void)
{
- return platform_driver_probe(&s3c24xx_spidrv, s3c24xx_spi_probe);
+ return platform_driver_probe(&s3c24xx_spi_driver, s3c24xx_spi_probe);
}
static void __exit s3c24xx_spi_exit(void)
{
- platform_driver_unregister(&s3c24xx_spidrv);
+ platform_driver_unregister(&s3c24xx_spi_driver);
}
module_init(s3c24xx_spi_init);
#endif
break;
case SSB_BUSTYPE_SSB:
+ dev->dma_mask = &dev->coherent_dma_mask;
break;
}
* with IRQF_SHARED. As usb_hcd_irq() will always disable
* interrupts we can remove it here.
*/
- irqflags &= ~IRQF_DISABLED;
+ if (irqflags & IRQF_SHARED)
+ irqflags &= ~IRQF_DISABLED;
snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
hcd->driver->description, hcd->self.busnum);
USB_PORT_STAT_C_ENABLE);
#endif
- /* Try to use the debounce delay for protection against
- * port-enable changes caused, for example, by EMI.
- */
- if (portchange & (USB_PORT_STAT_C_CONNECTION |
- USB_PORT_STAT_C_ENABLE)) {
- status = hub_port_debounce(hub, port1);
- if (status < 0) {
- if (printk_ratelimit())
- dev_err (hub_dev, "connect-debounce failed, "
- "port %d disabled\n", port1);
- portstatus &= ~USB_PORT_STAT_CONNECTION;
- } else {
- portstatus = status;
- }
- }
-
/* Try to resuscitate an existing device */
udev = hdev->children[port1-1];
if ((portstatus & USB_PORT_STAT_CONNECTION) && udev &&
udev->state != USB_STATE_NOTATTACHED) {
-
usb_lock_device(udev);
if (portstatus & USB_PORT_STAT_ENABLE) {
status = 0; /* Nothing to do */
- } else if (!udev->persist_enabled) {
- status = -ENODEV; /* Mustn't resuscitate */
#ifdef CONFIG_USB_SUSPEND
- } else if (udev->state == USB_STATE_SUSPENDED) {
+ } else if (udev->state == USB_STATE_SUSPENDED &&
+ udev->persist_enabled) {
/* For a suspended device, treat this as a
* remote wakeup event.
*/
#endif
} else {
- status = usb_reset_device(udev);
+ status = -ENODEV; /* Don't resuscitate */
}
usb_unlock_device(udev);
usb_disconnect(&hdev->children[port1-1]);
clear_bit(port1, hub->change_bits);
+ if (portchange & (USB_PORT_STAT_C_CONNECTION |
+ USB_PORT_STAT_C_ENABLE)) {
+ status = hub_port_debounce(hub, port1);
+ if (status < 0) {
+ if (printk_ratelimit())
+ dev_err(hub_dev, "connect-debounce failed, "
+ "port %d disabled\n", port1);
+ portstatus &= ~USB_PORT_STAT_CONNECTION;
+ } else {
+ portstatus = status;
+ }
+ }
+
/* Return now if debouncing failed or nothing is connected */
if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
&& !(portstatus & (1 << USB_PORT_FEAT_POWER)))
set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
-
+
if (portstatus & USB_PORT_STAT_ENABLE)
goto done;
return;
fsl_writel(tmp, &dr_regs->endpointlistaddr);
VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x",
- (int)udc->ep_qh, (int)tmp,
+ udc->ep_qh, (int)tmp,
fsl_readl(&dr_regs->endpointlistaddr));
/* Config PHY interface */
omap_set_dma_dest_params(ep->lch,
OMAP_DMA_PORT_TIPB,
OMAP_DMA_AMODE_CONSTANT,
- (unsigned long) io_v2p(UDC_DATA_DMA),
+ UDC_DATA_DMA,
0, 0);
}
} else {
omap_set_dma_src_params(ep->lch,
OMAP_DMA_PORT_TIPB,
OMAP_DMA_AMODE_CONSTANT,
- (unsigned long) io_v2p(UDC_DATA_DMA),
+ UDC_DATA_DMA,
0, 0);
/* EMIFF or SDRC */
omap_set_dma_dest_burst_mode(ep->lch,
return -ETIMEDOUT;
}
-static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr,
- u32 mask, u32 done, int usec)
-{
- int error = handshake(ehci, ptr, mask, done, usec);
- if (error)
- ehci_to_hcd(ehci)->state = HC_STATE_HALT;
-
- return error;
-}
-
/* force HC to halt state from unknown (EHCI spec section 2.3) */
static int ehci_halt (struct ehci_hcd *ehci)
{
STS_HALT, STS_HALT, 16 * 125);
}
+static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr,
+ u32 mask, u32 done, int usec)
+{
+ int error;
+
+ error = handshake(ehci, ptr, mask, done, usec);
+ if (error) {
+ ehci_halt(ehci);
+ ehci_to_hcd(ehci)->state = HC_STATE_HALT;
+ ehci_err(ehci, "force halt; handhake %p %08x %08x -> %d\n",
+ ptr, mask, done, error);
+ }
+
+ return error;
+}
+
/* put TDI/ARC silicon into EHCI mode */
static void tdi_reset (struct ehci_hcd *ehci)
{
u32 cmd;
int status;
+ if (ehci->periodic_sched++)
+ return 0;
+
/* did clearing PSE did take effect yet?
* takes effect only at frame boundaries...
*/
u32 cmd;
int status;
+ if (--ehci->periodic_sched)
+ return 0;
+
/* did setting PSE not take effect yet?
* takes effect only at frame boundaries...
*/
: (qh->usecs * 8);
/* maybe enable periodic schedule processing */
- if (!ehci->periodic_sched++)
- return enable_periodic (ehci);
-
- return 0;
+ return enable_periodic(ehci);
}
-static void qh_unlink_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh)
+static int qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh)
{
unsigned i;
unsigned period;
qh_put (qh);
/* maybe turn off periodic schedule */
- ehci->periodic_sched--;
- if (!ehci->periodic_sched)
- (void) disable_periodic (ehci);
+ return disable_periodic(ehci);
}
static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh)
urb->hcpriv = NULL;
timer_action (ehci, TIMER_IO_WATCHDOG);
- if (unlikely (!ehci->periodic_sched++))
- return enable_periodic (ehci);
- return 0;
+ return enable_periodic(ehci);
}
#define ISO_ERRS (EHCI_ISOC_BUF_ERR | EHCI_ISOC_BABBLE | EHCI_ISOC_XACTERR)
ehci_urb_done(ehci, urb, 0);
retval = true;
urb = NULL;
- ehci->periodic_sched--;
+ (void) disable_periodic(ehci);
ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
if (unlikely (list_empty (&stream->td_list))) {
urb->hcpriv = NULL;
timer_action (ehci, TIMER_IO_WATCHDOG);
- if (!ehci->periodic_sched++)
- return enable_periodic (ehci);
- return 0;
+ return enable_periodic(ehci);
}
/*-------------------------------------------------------------------------*/
ehci_urb_done(ehci, urb, 0);
retval = true;
urb = NULL;
- ehci->periodic_sched--;
+ (void) disable_periodic(ehci);
ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
if (list_empty (&stream->td_list)) {
if (unlikely (modified)) {
if (likely(ehci->periodic_sched > 0))
goto restart;
- /* maybe we can short-circuit this scan! */
- disable_periodic(ehci);
+ /* short-circuit this scan */
now_uframe = clock;
break;
}
if (cpu_is_omap16xx())
ocpi_enable();
-#ifdef CONFIG_ARCH_OMAP_OTG
+#ifdef CONFIG_USB_OTG
if (need_transceiver) {
ohci->transceiver = otg_get_transceiver();
if (ohci->transceiver) {
# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
config USB_MUSB_HDRC
depends on (USB || USB_GADGET) && HAVE_CLK
+ depends on !SUPERH
select TWL4030_USB if MACH_OMAP_3430SDP
tristate 'Inventra Highspeed Dual Role Controller (TI, ...)'
help
#include <linux/io.h>
#ifdef CONFIG_ARM
-#include <asm/arch/hardware.h>
-#include <asm/arch/memory.h>
+#include <mach/hardware.h>
+#include <mach/memory.h>
#include <asm/mach-types.h>
#endif
#include <linux/io.h>
#include <asm/mach-types.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/mux.h>
+#include <mach/hardware.h>
+#include <mach/mux.h>
#include "musb_core.h"
#include "omap2430.h"
#define __MUSB_OMAP243X_H__
#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
-#include <asm/arch/hardware.h>
-#include <asm/arch/usb.h>
+#include <mach/hardware.h>
+#include <mach/usb.h>
/*
* OMAP2430-specific definitions
if (serial->type->set_termios) {
termios->c_cflag = cflag;
tty_termios_encode_baud_rate(termios, baud, baud);
- serial->type->set_termios(NULL, port, &dummy);
+ serial->type->set_termios(tty, port, &dummy);
port->port.tty = NULL;
kfree(termios);
{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
+ { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
+ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
+ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ } /* Terminating Entry */
};
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
#define PAPOUCH_VID 0x5050 /* Vendor ID */
#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
+#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */
/*
* ACG Identification Technologies GmbH products (http://www.acg.de/).
/* Rig Expert Ukraine devices */
#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */
+/* Domintell products http://www.domintell.com */
+#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */
+#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */
+
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
/* ZTE PRODUCTS */
#define ZTE_VENDOR_ID 0x19d2
#define ZTE_PRODUCT_MF628 0x0015
+#define ZTE_PRODUCT_CDMA_TECH 0xfffe
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
+ { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
*/
-#define DRIVER_VERSION "v.1.2.13a"
+#define DRIVER_VERSION "v.1.3.2"
#define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
#define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
#define SWIMS_USB_REQUEST_SetPower 0x00
#define SWIMS_USB_REQUEST_SetNmea 0x07
-#define SWIMS_USB_REQUEST_SetMode 0x0B
-#define SWIMS_USB_REQUEST_GetSwocInfo 0x0A
-#define SWIMS_SET_MODE_Modem 0x0001
/* per port private data */
#define N_IN_URB 4
{ USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
- { USB_DEVICE(0x0f30, 0x1b1d) }, /* Sierra Wireless MC5720 */
+ { USB_DEVICE(0x03f0, 0x1b1d) }, /* HP ev2200 a.k.a MC5720 */
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
{ USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */
{ USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
/* Sierra Wireless Device */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) },
{ USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */
+ { USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless Device */
+ { USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless Device */
{ USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6821) }, /* Sierra Wireless AirCard 875U */
{ USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780 */
{ USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */
+ { USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */
{ USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */
{ USB_DEVICE(0x1199, 0x683C) }, /* Sierra Wireless MC8790 */
{ USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8790 */
/* Sierra Wireless Device */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)},
/* Sierra Wireless Device */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)},
+ /* Sierra Wireless Device */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
if (buffer) {
memcpy(buffer, fw_p->data, fw_p->size);
memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
- ti_do_download(dev, pipe, buffer, fw_p->size);
+ status = ti_do_download(dev, pipe, buffer, fw_p->size);
kfree(buffer);
}
release_firmware(fw_p);
((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) &&
(le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) ||
((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) &&
- (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID))) {
+ (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) ||
+ ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) &&
+ (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) {
if (interface != dev->actconfig->interface[0]) {
/* check out the endpoints of the other interface*/
iface_desc = dev->actconfig->interface[0]->cur_altsetting;
on the resulting scsi device node returns the Karma to normal
operation.
-config USB_STORAGE_SIERRA
- bool "Sierra Wireless TRU-Install Feature Support"
- depends on USB_STORAGE
- help
- Say Y here to include additional code to support Sierra Wireless
- products with the TRU-Install feature (e.g., AC597E, AC881U).
-
- This code switches the Sierra Wireless device from being in
- Mass Storage mode to Modem mode. It also has the ability to
- support host software upgrades should full Linux support be added
- to TRU-Install.
-
config USB_STORAGE_CYPRESS_ATACB
bool "SAT emulation on Cypress USB/ATA Bridge with ATACB"
depends on USB_STORAGE
usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o
usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA) += karma.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_SIERRA) += sierra_ms.o
usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o
usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \
- initializers.o $(usb-storage-obj-y)
+ initializers.o sierra_ms.o $(usb-storage-obj-y)
ifneq ($(CONFIG_USB_LIBUSUAL),)
obj-$(CONFIG_USB) += libusual.o
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64 ),
+/* Reported by Filip Joelsson <filip@blueturtle.nu> */
+UNUSUAL_DEV( 0x0421, 0x005d, 0x0001, 0x0600,
+ "Nokia",
+ "Nokia 3110c",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/* Reported by Mario Rettig <mariorettig@web.de> */
UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100,
"Nokia",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Richard Nauber <RichardNauber@web.de> */
+UNUSUAL_DEV( 0x0421, 0x04fa, 0x0601, 0x0601,
+ "Nokia",
+ "6300",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
+/* Patch for Nokia 5310 capacity */
+UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591,
+ "Nokia",
+ "5310",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210,
"SMSC",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Adrian Pilchowiec <adi1981@epf.pl> */
+UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000,
+ "RockChip",
+ "MP3",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
+
/* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
* This USB MP3/AVI player device fails and disconnects if more than 128
* sectors (64kB) are read/written in a single command, and may be present
US_SC_DEVICE, US_PR_DEVICE, NULL,
0),
-#ifdef CONFIG_USB_STORAGE_SIERRA
/* Reported by Kevin Lloyd <linux@sierrawireless.com>
* Entry is needed for the initializer function override,
* which instructs the device to load as a modem
"USB MMC Storage",
US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init,
0),
-#endif
/* Reported by Jaco Kroon <jaco@kroon.co.za>
* The usb-storage module found on the Digitech GNX4 (and supposedly other
#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
#include "cypress_atacb.h"
#endif
-#ifdef CONFIG_USB_STORAGE_SIERRA
#include "sierra_ms.h"
-#endif
/* Some informational data */
MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
return value;
}
+static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo)
+{
+ /* Turn off the LCD controller and the DMA controller */
+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+ sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
+
+ /* Wait for the LCDC core to become idle */
+ while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
+ msleep(10);
+
+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+}
+
+static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo)
+{
+ atmel_lcdfb_stop_nowait(sinfo);
+
+ /* Wait for DMA engine to become idle... */
+ while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
+ msleep(10);
+}
+
+static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
+{
+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+ (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
+ | ATMEL_LCDC_PWR);
+}
+
static void atmel_lcdfb_update_dma(struct fb_info *info,
struct fb_var_screeninfo *var)
{
{
might_sleep();
- /* LCD power off */
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-
- /* wait for the LCDC core to become idle */
- while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
- msleep(10);
-
- /* DMA disable */
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
-
- /* wait for DMA engine to become idle */
- while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
- msleep(10);
-
- /* LCD power on */
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
- (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
-
- /* DMA enable */
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+ atmel_lcdfb_stop(sinfo);
+ atmel_lcdfb_start(sinfo);
}
/**
info->var.xres, info->var.yres,
info->var.xres_virtual, info->var.yres_virtual);
- /* Turn off the LCD controller and the DMA controller */
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-
- /* Wait for the LCDC core to become idle */
- while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
- msleep(10);
-
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+ atmel_lcdfb_stop_nowait(sinfo);
if (info->var.bits_per_pixel == 1)
info->fix.visual = FB_VISUAL_MONO01;
while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
msleep(10);
- dev_dbg(info->device, " * re-enable DMA engine\n");
- /* ...and enable it with updated configuration */
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
-
- dev_dbg(info->device, " * re-enable LCDC core\n");
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
- (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
+ atmel_lcdfb_start(sinfo);
dev_dbg(info->device, " * DONE\n");
ret = register_framebuffer(info);
if (ret < 0) {
dev_err(dev, "failed to register framebuffer device: %d\n", ret);
- goto free_cmap;
+ goto reset_drvdata;
}
/* add selected videomode to modelist */
return 0;
-
+reset_drvdata:
+ dev_set_drvdata(dev, NULL);
free_cmap:
fb_dealloc_cmap(&info->cmap);
unregister_irqs:
{
struct device *dev = &pdev->dev;
struct fb_info *info = dev_get_drvdata(dev);
- struct atmel_lcdfb_info *sinfo = info->par;
+ struct atmel_lcdfb_info *sinfo;
- if (!sinfo)
+ if (!info || !info->par)
return 0;
+ sinfo = info->par;
cancel_work_sync(&sinfo->task);
exit_backlight(sinfo);
struct fb_info *info = platform_get_drvdata(pdev);
struct atmel_lcdfb_info *sinfo = info->par;
+ /*
+ * We don't want to handle interrupts while the clock is
+ * stopped. It may take forever.
+ */
+ lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
+
sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
if (sinfo->atmel_lcdfb_power_control)
sinfo->atmel_lcdfb_power_control(0);
+
+ atmel_lcdfb_stop(sinfo);
atmel_lcdfb_stop_clock(sinfo);
+
return 0;
}
struct atmel_lcdfb_info *sinfo = info->par;
atmel_lcdfb_start_clock(sinfo);
+ atmel_lcdfb_start(sinfo);
if (sinfo->atmel_lcdfb_power_control)
sinfo->atmel_lcdfb_power_control(1);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
+
+ /* Enable FIFO & DMA errors */
+ lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI
+ | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
+
return 0;
}
#include <asm/gpio.h>
#include <asm/portmux.h>
-#include <asm/mach/bf54x-lq043.h>
+#include <mach/bf54x-lq043.h>
#define NO_BL_SUPPORT
static int cirrusfb_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
- int nom, den; /* translyting from pixels->bytes */
- int yres, i;
- static struct { int xres, yres; } modes[] =
- { { 1600, 1280 },
- { 1280, 1024 },
- { 1024, 768 },
- { 800, 600 },
- { 640, 480 },
- { -1, -1 } };
+ int yres;
+ /* memory size in pixels */
+ unsigned pixels = info->screen_size * 8 / var->bits_per_pixel;
switch (var->bits_per_pixel) {
case 1:
- nom = 4;
- den = 8;
+ pixels /= 4;
break; /* 8 pixel per byte, only 1/4th of mem usable */
case 8:
case 16:
case 24:
case 32:
- nom = var->bits_per_pixel / 8;
- den = 1;
break; /* 1 pixel == 1 byte */
default:
printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected..."
return -EINVAL;
}
- if (var->xres * nom / den * var->yres > info->screen_size) {
- printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected..."
- "resolution too high to fit into video memory!\n",
- var->xres, var->yres, var->bits_per_pixel);
- DPRINTK("EXIT - EINVAL error\n");
- return -EINVAL;
- }
-
+ if (var->xres_virtual < var->xres)
+ var->xres_virtual = var->xres;
/* use highest possible virtual resolution */
- if (var->xres_virtual == -1 &&
- var->yres_virtual == -1) {
- printk(KERN_INFO
- "cirrusfb: using maximum available virtual resolution\n");
- for (i = 0; modes[i].xres != -1; i++) {
- int size = modes[i].xres * nom / den * modes[i].yres;
- if (size < info->screen_size / 2)
- break;
- }
- if (modes[i].xres == -1) {
- printk(KERN_ERR "cirrusfb: could not find a virtual "
- "resolution that fits into video memory!!\n");
- DPRINTK("EXIT - EINVAL error\n");
- return -EINVAL;
- }
- var->xres_virtual = modes[i].xres;
- var->yres_virtual = modes[i].yres;
+ if (var->yres_virtual == -1) {
+ var->yres_virtual = pixels / var->xres_virtual;
printk(KERN_INFO "cirrusfb: virtual resolution set to "
"maximum of %dx%d\n", var->xres_virtual,
var->yres_virtual);
}
-
- if (var->xres_virtual < var->xres)
- var->xres_virtual = var->xres;
if (var->yres_virtual < var->yres)
var->yres_virtual = var->yres;
+ if (var->xres_virtual * var->yres_virtual > pixels) {
+ printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected... "
+ "virtual resolution too high to fit into video memory!\n",
+ var->xres_virtual, var->yres_virtual,
+ var->bits_per_pixel);
+ DPRINTK("EXIT - EINVAL error\n");
+ return -EINVAL;
+ }
+
+
if (var->xoffset < 0)
var->xoffset = 0;
if (var->yoffset < 0)
if (!fbcon_is_inactive(vc, info)) {
if (ops->blank_state != blank) {
+ int ret = 1;
+
ops->blank_state = blank;
fbcon_cursor(vc, blank ? CM_ERASE : CM_DRAW);
ops->cursor_flash = (!blank);
- if (fb_blank(info, blank))
+ if (info->fbops->fb_blank)
+ ret = info->fbops->fb_blank(blank, info);
+ if (ret)
fbcon_generic_blank(vc, info, blank);
}
__u32 max_len;
max_len = max(info->var.green.length, info->var.red.length);
max_len = max(info->var.blue.length, max_len);
- return ~(0xfff << (max_len & 0xff));
+ return (~(0xfff << max_len)) & 0xff;
}
static inline int attr_col_ec(int shift, struct vc_data *vc,
#define VOODOO5_MAX_PIXCLOCK 350000
static struct fb_fix_screeninfo tdfx_fix __devinitdata = {
- .id = "3Dfx",
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_PSEUDOCOLOR,
.ypanstep = 1,
if (dev_id < PCI_DEVICE_ID_3DFX_VOODOO5) {
/* Banshee/Voodoo3 */
chip_size = 2;
- if (has_sgram && (draminit0 & DRAMINIT0_SGRAM_TYPE))
+ if (has_sgram && !(draminit0 & DRAMINIT0_SGRAM_TYPE))
chip_size = 1;
} else {
/* Voodoo4/5 */
/* Configure the default fb_fix_screeninfo first */
switch (pdev->device) {
case PCI_DEVICE_ID_3DFX_BANSHEE:
- strcat(tdfx_fix.id, " Banshee");
+ strcpy(tdfx_fix.id, "3Dfx Banshee");
default_par->max_pixclock = BANSHEE_MAX_PIXCLOCK;
break;
case PCI_DEVICE_ID_3DFX_VOODOO3:
- strcat(tdfx_fix.id, " Voodoo3");
+ strcpy(tdfx_fix.id, "3Dfx Voodoo3");
default_par->max_pixclock = VOODOO3_MAX_PIXCLOCK;
break;
case PCI_DEVICE_ID_3DFX_VOODOO5:
- strcat(tdfx_fix.id, " Voodoo5");
+ strcpy(tdfx_fix.id, "3Dfx Voodoo5");
default_par->max_pixclock = VOODOO5_MAX_PIXCLOCK;
break;
}
return len;
}
-static int geodewdt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long geodewdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
void __user *argp = (void __user *)arg;
int __user *p = argp;
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = geodewdt_write,
- .ioctl = geodewdt_ioctl,
+ .unlocked_ioctl = geodewdt_ioctl,
.open = geodewdt_open,
.release = geodewdt_release,
};
outb(reg & ~asr_toggle_mask, asr_write_addr);
reg = inb(asr_read_addr);
- spin_unlock(&asr_lock);
}
static void asr_toggle(void)
.identity = "PNX4008 Watchdog",
};
-static long pnx4008_wdt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long pnx4008_wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
int ret = -ENOTTY;
int time;
return 0;
}
-static int rc32434_wdt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
void __user *argp = (void __user *)arg;
int new_timeout;
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = rc32434_wdt_write,
- .ioctl = rc32434_wdt_ioctl,
+ .unlocked_ioctl = rc32434_wdt_ioctl,
.open = rc32434_wdt_open,
.release = rc32434_wdt_release,
};
return 0;
}
-static int rdc321x_wdt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long rdc321x_wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
void __user *argp = (void __user *)arg;
unsigned int value;
static const struct file_operations rdc321x_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
- .ioctl = rdc321x_wdt_ioctl,
+ .unlocked_ioctl = rdc321x_wdt_ioctl,
.open = rdc321x_wdt_open,
.write = rdc321x_wdt_write,
.release = rdc321x_wdt_release,
return 0;
}
-static ssize_t watchdog_write(struct file *file, const char *data,
- size_t len, loff_t *ppos)
+static ssize_t watchdog_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
{
/*
* Refresh the timer.
};
static long watchdog_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg)
+ unsigned long arg)
{
unsigned int new_margin;
+ int __user *int_arg = (int __user *)arg;
int ret = -ENOTTY;
switch (cmd) {
case WDIOC_GETSUPPORT:
ret = 0;
- if (copy_to_user((void *)arg, &ident, sizeof(ident)))
+ if (copy_to_user((void __user *)arg, &ident, sizeof(ident)))
ret = -EFAULT;
break;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
- ret = put_user(0, (int *)arg);
+ ret = put_user(0, int_arg);
break;
case WDIOC_KEEPALIVE:
break;
case WDIOC_SETTIMEOUT:
- ret = get_user(new_margin, (int *)arg);
+ ret = get_user(new_margin, int_arg);
if (ret)
break;
watchdog_ping();
/* Fall */
case WDIOC_GETTIMEOUT:
- ret = put_user(soft_margin, (int *)arg);
+ ret = put_user(soft_margin, int_arg);
break;
}
return ret;
#define PAGES2KB(_p) ((_p)<<(PAGE_SHIFT-10))
-#define BALLOON_CLASS_NAME "memory"
+#define BALLOON_CLASS_NAME "xen_memory"
struct balloon_stats {
/* We aim for 'current allocation' == 'target allocation'. */
$(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
$(call cmd,ihex)
+# Don't depend on ihex2fw if we're installing and it already exists.
+# Putting it after | in the dependencies doesn't seem sufficient when
+# we're installing after a cross-compile, because ihex2fw has dependencies
+# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and
+# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
+# is exported read-only for someone to run 'make install'.
+ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
+ihex2fw_dep :=
+else
+ihex2fw_dep := $(obj)/ihex2fw
+endif
+
# .HEX is also Intel HEX, but where the offset and length in each record
# is actually meaningful, because the firmware has to be loaded in a certain
# order rather than as a single binary blob. Thus, we convert them into our
# more compact binary representation of ihex records (<linux/ihex.h>)
-$(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
$(call cmd,ihex2fw)
# .H16 is our own modified form of Intel HEX, with 16-bit length for records.
-$(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
$(call cmd,h16tofw)
$(firmware-dirs):
return NULL;
error:
- if (fid)
- p9_client_clunk(fid);
+ p9_client_clunk(fid);
return ERR_PTR(result);
}
inode->i_ino);
if (err) {
inode_dec_link_count(inode);
- iput(inode);
mutex_unlock(&info->bfs_lock);
+ iput(inode);
return err;
}
mutex_unlock(&info->bfs_lock);
on parent directory when server supports Unix Extensions but not POSIX
create. Update cifs.upcall version to handle new Kerberos sec flags
(this requires update of cifs.upcall program from Samba). Fix memory leak
-on dns_upcall (resolving DFS referralls).
+on dns_upcall (resolving DFS referralls). Fix plain text password
+authentication (requires setting SecurityFlags to 0x30030 to enable
+lanman and plain text though). Fix writes to be at correct offset when
+file is open with O_APPEND and file is on a directio (forcediretio) mount.
Version 1.53
------------
hashing mechanisms (as "must use") on the other hand
does not make much sense. Default flags are
0x07007
- (NTLM, NTLMv2 and packet signing allowed). Maximum
+ (NTLM, NTLMv2 and packet signing allowed). The maximum
allowable flags if you want to allow mounts to servers
using weaker password hashes is 0x37037 (lanman,
- plaintext, ntlm, ntlmv2, signing allowed):
+ plaintext, ntlm, ntlmv2, signing allowed). Some
+ SecurityFlags require the corresponding menuconfig
+ options to be enabled (lanman and plaintext require
+ CONFIG_CIFS_WEAK_PW_HASH for example). Enabling
+ plaintext authentication currently requires also
+ enabling lanman authentication in the security flags
+ because the cifs module only supports sending
+ laintext passwords using the older lanman dialect
+ form of the session setup SMB. (e.g. for authentication
+ using plain text passwords, set the SecurityFlags
+ to 0x30030):
may use packet signing 0x00001
must use packet signing 0x01001
if ((ses->server->secMode & SECMODE_PW_ENCRYPT) == 0)
if (extended_security & CIFSSEC_MAY_PLNTXT) {
+ memset(lnm_session_key, 0, CIFS_SESS_KEY_SIZE);
memcpy(lnm_session_key, password_with_pad,
CIFS_ENCPWD_SIZE);
return;
return -EBADF;
open_file = (struct cifsFileInfo *) file->private_data;
+ rc = generic_write_checks(file, poffset, &write_size, 0);
+ if (rc)
+ return rc;
+
xid = GetXid();
if (*poffset > file->f_path.dentry->d_inode->i_size)
#ifdef CONFIG_CIFS_WEAK_PW_HASH
char lnm_session_key[CIFS_SESS_KEY_SIZE];
+ pSMB->req.hdr.Flags2 &= ~SMBFLG2_UNICODE;
+
/* no capabilities flags in old lanman negotiation */
pSMB->old_req.PasswordLength = cpu_to_le16(CIFS_SESS_KEY_SIZE);
if (dentry->d_parent != parent)
goto next;
+ /* non-existing due to RCU? */
+ if (d_unhashed(dentry))
+ goto next;
+
/*
* It is safe to compare names since d_move() cannot
* change the qstr (protected by d_lock).
goto next;
}
- if (!d_unhashed(dentry)) {
- atomic_inc(&dentry->d_count);
- found = dentry;
- }
+ atomic_inc(&dentry->d_count);
+ found = dentry;
spin_unlock(&dentry->d_lock);
break;
next:
tsk->active_mm = mm;
activate_mm(active_mm, mm);
task_unlock(tsk);
- mm_update_next_owner(old_mm);
arch_pick_mmap_layout(mm);
if (old_mm) {
up_read(&old_mm->mmap_sem);
BUG_ON(active_mm != old_mm);
+ mm_update_next_owner(old_mm);
mmput(old_mm);
return 0;
}
}
/*
- * remove_kevent - cleans up and ultimately frees the given kevent
+ * remove_kevent - cleans up the given kevent
*
* Caller must hold dev->ev_mutex.
*/
dev->event_count--;
dev->queue_size -= sizeof(struct inotify_event) + kevent->event.len;
+}
+/*
+ * free_kevent - frees the given kevent.
+ */
+static void free_kevent(struct inotify_kernel_event *kevent)
+{
kfree(kevent->name);
kmem_cache_free(event_cachep, kevent);
}
struct inotify_kernel_event *kevent;
kevent = inotify_dev_get_event(dev);
remove_kevent(dev, kevent);
+ free_kevent(kevent);
}
}
dev = file->private_data;
while (1) {
- int events;
prepare_to_wait(&dev->wq, &wait, TASK_INTERRUPTIBLE);
mutex_lock(&dev->ev_mutex);
- events = !list_empty(&dev->events);
- mutex_unlock(&dev->ev_mutex);
- if (events) {
+ if (!list_empty(&dev->events)) {
ret = 0;
break;
}
+ mutex_unlock(&dev->ev_mutex);
if (file->f_flags & O_NONBLOCK) {
ret = -EAGAIN;
if (ret)
return ret;
- mutex_lock(&dev->ev_mutex);
while (1) {
struct inotify_kernel_event *kevent;
}
break;
}
+ remove_kevent(dev, kevent);
+
+ /*
+ * Must perform the copy_to_user outside the mutex in order
+ * to avoid a lock order reversal with mmap_sem.
+ */
+ mutex_unlock(&dev->ev_mutex);
if (copy_to_user(buf, &kevent->event, event_size)) {
ret = -EFAULT;
count -= kevent->event.len;
}
- remove_kevent(dev, kevent);
+ free_kevent(kevent);
+
+ mutex_lock(&dev->ev_mutex);
}
mutex_unlock(&dev->ev_mutex);
}
}
+ if (errors > 0) {
+ dfprintk(MOUNT, "NFS: parsing encountered %d error%s\n",
+ errors, (errors == 1 ? "" : "s"));
+ if (!sloppy)
+ return 0;
+ }
return 1;
out_nomem:
* enough space for either:
*/
alloc = sizeof(struct posix_ace_state_array)
- + cnt*sizeof(struct posix_ace_state);
+ + cnt*sizeof(struct posix_user_ace_state);
state->users = kzalloc(alloc, GFP_KERNEL);
if (!state->users)
return -ENOMEM;
int slack_bytes;
__be32 status;
- status = nfserr_resource;
- cstate = cstate_alloc();
- if (cstate == NULL)
- goto out;
-
resp->xbuf = &rqstp->rq_res;
resp->p = rqstp->rq_res.head[0].iov_base + rqstp->rq_res.head[0].iov_len;
resp->tagp = resp->p;
if (args->minorversion > NFSD_SUPPORTED_MINOR_VERSION)
goto out;
+ status = nfserr_resource;
+ cstate = cstate_alloc();
+ if (cstate == NULL)
+ goto out;
+
status = nfs_ok;
while (!status && resp->opcnt < args->opcnt) {
op = &args->ops[resp->opcnt++];
nfsd4_increment_op_stats(op->opnum);
}
+ cstate_free(cstate);
out:
nfsd4_release_compoundargs(args);
- cstate_free(cstate);
dprintk("nfsv4 compound returned %d\n", ntohl(status));
return status;
}
* Reason flags (32-bit). Cumulative flags describing the change(s) to the
* file since it was last opened. I think the names speak for themselves but
* if you disagree check out the descriptions in the Linux NTFS project NTFS
- * documentation: http://linux-ntfs.sourceforge.net/ntfs/files/usnjrnl.html
+ * documentation: http://www.linux-ntfs.org/
*/
enum {
USN_REASON_DATA_OVERWRITE = const_cpu_to_le32(0x00000001),
* Source info flags (32-bit). Information about the source of the change(s)
* to the file. For detailed descriptions of what these mean, see the Linux
* NTFS project NTFS documentation:
- * http://linux-ntfs.sourceforge.net/ntfs/files/usnjrnl.html
+ * http://www.linux-ntfs.org/
*/
enum {
USN_SOURCE_DATA_MANAGEMENT = const_cpu_to_le32(0x00000001),
goto bail;
}
- if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)) && !p_blkno) {
+ if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)) && !p_blkno && create) {
ocfs2_error(inode->i_sb,
"Inode %llu has a hole at block %llu\n",
(unsigned long long)OCFS2_I(inode)->ip_blkno,
if (!size)
continue;
if (from + size > get_capacity(disk)) {
- printk(KERN_ERR " %s: p%d exceeds device capacity\n",
+ printk(KERN_WARNING
+ "%s: p%d exceeds device capacity\n",
disk->disk_name, p);
- continue;
}
res = add_partition(disk, p, from, size, state->parts[p].flags);
if (res) {
return 0;
}
-/*
- * Use precise platform statistics if available:
- */
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-static cputime_t task_utime(struct task_struct *p)
-{
- return p->utime;
-}
-
-static cputime_t task_stime(struct task_struct *p)
-{
- return p->stime;
-}
-#else
-static cputime_t task_utime(struct task_struct *p)
-{
- clock_t utime = cputime_to_clock_t(p->utime),
- total = utime + cputime_to_clock_t(p->stime);
- u64 temp;
-
- /*
- * Use CFS's precise accounting:
- */
- temp = (u64)nsec_to_clock_t(p->se.sum_exec_runtime);
-
- if (total) {
- temp *= utime;
- do_div(temp, total);
- }
- utime = (clock_t)temp;
-
- p->prev_utime = max(p->prev_utime, clock_t_to_cputime(utime));
- return p->prev_utime;
-}
-
-static cputime_t task_stime(struct task_struct *p)
-{
- clock_t stime;
-
- /*
- * Use CFS's precise accounting. (we subtract utime from
- * the total, to make sure the total observed by userspace
- * grows monotonically - apps rely on that):
- */
- stime = nsec_to_clock_t(p->se.sum_exec_runtime) -
- cputime_to_clock_t(task_utime(p));
-
- if (stime >= 0)
- p->prev_stime = max(p->prev_stime, clock_t_to_cputime(stime));
-
- return p->prev_stime;
-}
-#endif
-
-static cputime_t task_gtime(struct task_struct *p)
-{
- return p->gtime;
-}
-
static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *task, int whole)
{
for (tmp = dir->subdir; tmp; tmp = tmp->next)
if (strcmp(tmp->name, dp->name) == 0) {
- printk(KERN_WARNING "proc_dir_entry '%s' already "
- "registered\n", dp->name);
+ printk(KERN_WARNING "proc_dir_entry '%s/%s' already registered\n",
+ dir->name, dp->name);
dump_stack();
break;
}
#include <linux/tty.h>
#include <linux/string.h>
#include <linux/mman.h>
+#include <linux/quicklist.h>
#include <linux/proc_fs.h>
#include <linux/ioport.h>
#include <linux/mm.h>
"SReclaimable: %8lu kB\n"
"SUnreclaim: %8lu kB\n"
"PageTables: %8lu kB\n"
+#ifdef CONFIG_QUICKLIST
+ "Quicklists: %8lu kB\n"
+#endif
"NFS_Unstable: %8lu kB\n"
"Bounce: %8lu kB\n"
"WritebackTmp: %8lu kB\n"
K(global_page_state(NR_SLAB_RECLAIMABLE)),
K(global_page_state(NR_SLAB_UNRECLAIMABLE)),
K(global_page_state(NR_PAGETABLE)),
+#ifdef CONFIG_QUICKLIST
+ K(quicklist_total_size()),
+#endif
K(global_page_state(NR_UNSTABLE_NFS)),
K(global_page_state(NR_BOUNCE)),
K(global_page_state(NR_WRITEBACK_TEMP)),
* size 0 on the assumption that it's going to be used for an mmap of shared
* memory
*/
-static int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize)
+int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize)
{
struct pagevec lru_pvec;
unsigned long npages, xpages, loop, limit;
int subtract_lebs;
long long available;
- /*
- * Force the amount available to the total size reported if the used
- * space is zero.
- */
- if (c->lst.total_used <= UBIFS_INO_NODE_SZ &&
- c->budg_data_growth + c->budg_dd_growth == 0) {
- /* Do the same calculation as for c->block_cnt */
- available = c->main_lebs - 2;
- available *= c->leb_size - c->dark_wm;
- return available;
- }
-
available = c->main_bytes - c->lst.total_used;
/*
}
/**
- * ubifs_budg_get_free_space - return amount of free space.
+ * ubifs_reported_space - calculate reported free space.
+ * @c: the UBIFS file-system description object
+ * @free: amount of free space
+ *
+ * This function calculates amount of free space which will be reported to
+ * user-space. User-space application tend to expect that if the file-system
+ * (e.g., via the 'statfs()' call) reports that it has N bytes available, they
+ * are able to write a file of size N. UBIFS attaches node headers to each data
+ * node and it has to write indexind nodes as well. This introduces additional
+ * overhead, and UBIFS it has to report sligtly less free space to meet the
+ * above expectetion.
+ *
+ * This function assumes free space is made up of uncompressed data nodes and
+ * full index nodes (one per data node, tripled because we always allow enough
+ * space to write the index thrice).
+ *
+ * Note, the calculation is pessimistic, which means that most of the time
+ * UBIFS reports less space than it actually has.
+ */
+long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free)
+{
+ int divisor, factor, f;
+
+ /*
+ * Reported space size is @free * X, where X is UBIFS block size
+ * divided by UBIFS block size + all overhead one data block
+ * introduces. The overhead is the node header + indexing overhead.
+ *
+ * Indexing overhead calculations are based on the following formula:
+ * I = N/(f - 1) + 1, where I - number of indexing nodes, N - number
+ * of data nodes, f - fanout. Because effective UBIFS fanout is twice
+ * as less than maximum fanout, we assume that each data node
+ * introduces 3 * @c->max_idx_node_sz / (@c->fanout/2 - 1) bytes.
+ * Note, the multiplier 3 is because UBIFS reseves thrice as more space
+ * for the index.
+ */
+ f = c->fanout > 3 ? c->fanout >> 1 : 2;
+ factor = UBIFS_BLOCK_SIZE;
+ divisor = UBIFS_MAX_DATA_NODE_SZ;
+ divisor += (c->max_idx_node_sz * 3) / (f - 1);
+ free *= factor;
+ do_div(free, divisor);
+ return free;
+}
+
+/**
+ * ubifs_get_free_space - return amount of free space.
* @c: UBIFS file-system description object
*
- * This function returns amount of free space on the file-system.
+ * This function calculates amount of free space to report to user-space.
+ *
+ * Because UBIFS may introduce substantial overhead (the index, node headers,
+ * alighment, wastage at the end of eraseblocks, etc), it cannot report real
+ * amount of free flash space it has (well, because not all dirty space is
+ * reclamable, UBIFS does not actually know the real amount). If UBIFS did so,
+ * it would bread user expectetion about what free space is. Users seem to
+ * accustomed to assume that if the file-system reports N bytes of free space,
+ * they would be able to fit a file of N bytes to the FS. This almost works for
+ * traditional file-systems, because they have way less overhead than UBIFS.
+ * So, to keep users happy, UBIFS tries to take the overhead into account.
*/
-long long ubifs_budg_get_free_space(struct ubifs_info *c)
+long long ubifs_get_free_space(struct ubifs_info *c)
{
- int min_idx_lebs, rsvd_idx_lebs;
+ int min_idx_lebs, rsvd_idx_lebs, lebs;
long long available, outstanding, free;
- /* Do exactly the same calculations as in 'do_budget_space()' */
spin_lock(&c->space_lock);
min_idx_lebs = ubifs_calc_min_idx_lebs(c);
+ outstanding = c->budg_data_growth + c->budg_dd_growth;
- if (min_idx_lebs > c->lst.idx_lebs)
- rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs;
- else
- rsvd_idx_lebs = 0;
-
- if (rsvd_idx_lebs > c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt
- - c->lst.taken_empty_lebs) {
+ /*
+ * Force the amount available to the total size reported if the used
+ * space is zero.
+ */
+ if (c->lst.total_used <= UBIFS_INO_NODE_SZ && !outstanding) {
spin_unlock(&c->space_lock);
- return 0;
+ return (long long)c->block_cnt << UBIFS_BLOCK_SHIFT;
}
available = ubifs_calc_available(c, min_idx_lebs);
- outstanding = c->budg_data_growth + c->budg_dd_growth;
- c->min_idx_lebs = min_idx_lebs;
+
+ /*
+ * When reporting free space to user-space, UBIFS guarantees that it is
+ * possible to write a file of free space size. This means that for
+ * empty LEBs we may use more precise calculations than
+ * 'ubifs_calc_available()' is using. Namely, we know that in empty
+ * LEBs we would waste only @c->leb_overhead bytes, not @c->dark_wm.
+ * Thus, amend the available space.
+ *
+ * Note, the calculations below are similar to what we have in
+ * 'do_budget_space()', so refer there for comments.
+ */
+ if (min_idx_lebs > c->lst.idx_lebs)
+ rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs;
+ else
+ rsvd_idx_lebs = 0;
+ lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt -
+ c->lst.taken_empty_lebs;
+ lebs -= rsvd_idx_lebs;
+ available += lebs * (c->dark_wm - c->leb_overhead);
spin_unlock(&c->space_lock);
if (available > outstanding)
printk(KERN_DEBUG "\t%d orphan inode numbers:\n", n);
for (i = 0; i < n; i++)
printk(KERN_DEBUG "\t ino %llu\n",
- le64_to_cpu(orph->inos[i]));
+ (unsigned long long)le64_to_cpu(orph->inos[i]));
break;
}
default:
while (1) {
dbg_gen("feed '%s', ino %llu, new f_pos %#x",
- dent->name, le64_to_cpu(dent->inum),
+ dent->name, (unsigned long long)le64_to_cpu(dent->inum),
key_hash_flash(c, &dent->key));
ubifs_assert(dent->ch.sqnum > ubifs_inode(dir)->creat_sqnum);
if (err) {
if (err != -ENOSPC)
return err;
- err = 0;
budgeted = 0;
}
int err;
struct ubifs_budget_req req;
loff_t old_size = inode->i_size, new_size = attr->ia_size;
- int offset = new_size & (UBIFS_BLOCK_SIZE - 1);
+ int offset = new_size & (UBIFS_BLOCK_SIZE - 1), budgeted = 1;
struct ubifs_inode *ui = ubifs_inode(inode);
dbg_gen("ino %lu, size %lld -> %lld", inode->i_ino, old_size, new_size);
/* A funny way to budget for truncation node */
req.dirtied_ino_d = UBIFS_TRUN_NODE_SZ;
err = ubifs_budget_space(c, &req);
- if (err)
- return err;
+ if (err) {
+ /*
+ * Treat truncations to zero as deletion and always allow them,
+ * just like we do for '->unlink()'.
+ */
+ if (new_size || err != -ENOSPC)
+ return err;
+ budgeted = 0;
+ }
err = vmtruncate(inode, new_size);
if (err)
err = ubifs_jnl_truncate(c, inode, old_size, new_size);
mutex_unlock(&ui->ui_mutex);
out_budg:
- ubifs_release_budget(c, &req);
+ if (budgeted)
+ ubifs_release_budget(c, &req);
+ else {
+ c->nospace = c->nospace_rp = 0;
+ smp_wmb();
+ }
return err;
}
* dirty index heap, and it falls-back to LPT scanning if the heaps are empty
* or do not have an LEB which satisfies the @min_space criteria.
*
- * Note:
- * o LEBs which have less than dead watermark of dirty space are never picked
- * by this function;
- *
- * Returns zero and the LEB properties of
- * found dirty LEB in case of success, %-ENOSPC if no dirty LEB was found and a
- * negative error code in case of other failures. The returned LEB is marked as
- * "taken".
+ * Note, LEBs which have less than dead watermark of free + dirty space are
+ * never picked by this function.
*
* The additional @pick_free argument controls if this function has to return a
* free or freeable LEB if one is present. For example, GC must to set it to %1,
*
* In addition @pick_free is set to %2 by the recovery process in order to
* recover gc_lnum in which case an index LEB must not be returned.
+ *
+ * This function returns zero and the LEB properties of found dirty LEB in case
+ * of success, %-ENOSPC if no dirty LEB was found and a negative error code in
+ * case of other failures. The returned LEB is marked as "taken".
*/
int ubifs_find_dirty_leb(struct ubifs_info *c, struct ubifs_lprops *ret_lp,
int min_space, int pick_free)
int lebs, rsvd_idx_lebs = 0;
spin_lock(&c->space_lock);
- lebs = c->lst.empty_lebs;
+ lebs = c->lst.empty_lebs + c->idx_gc_cnt;
lebs += c->freeable_cnt - c->lst.taken_empty_lebs;
/*
lp = idx_lp;
if (lp) {
- ubifs_assert(lp->dirty >= c->dead_wm);
+ ubifs_assert(lp->free + lp->dirty >= c->dead_wm);
goto found;
}
rsvd_idx_lebs = 0;
lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt -
c->lst.taken_empty_lebs;
- ubifs_assert(lebs + c->lst.idx_lebs >= c->min_idx_lebs);
if (rsvd_idx_lebs < lebs)
/*
* OK to allocate an empty LEB, but we still don't want to go
err = move_nodes(c, sleb);
if (err)
- goto out;
+ goto out_inc_seq;
err = gc_sync_wbufs(c);
if (err)
- goto out;
+ goto out_inc_seq;
err = ubifs_change_one_lp(c, lnum, c->leb_size, 0, 0, 0, 0);
if (err)
- goto out;
+ goto out_inc_seq;
+
+ /* Allow for races with TNC */
+ c->gced_lnum = lnum;
+ smp_wmb();
+ c->gc_seq += 1;
+ smp_wmb();
if (c->gc_lnum == -1) {
c->gc_lnum = lnum;
out:
ubifs_scan_destroy(sleb);
return err;
+
+out_inc_seq:
+ /* We may have moved at least some nodes so allow for races with TNC */
+ c->gced_lnum = lnum;
+ smp_wmb();
+ c->gc_seq += 1;
+ smp_wmb();
+ goto out;
}
/**
return (void *)((struct ubifs_branch *)idx->branches)->key;
}
-/**
- * ubifs_reported_space - calculate reported free space.
- * @c: the UBIFS file-system description object
- * @free: amount of free space
- *
- * This function calculates amount of free space which will be reported to
- * user-space. User-space application tend to expect that if the file-system
- * (e.g., via the 'statfs()' call) reports that it has N bytes available, they
- * are able to write a file of size N. UBIFS attaches node headers to each data
- * node and it has to write indexind nodes as well. This introduces additional
- * overhead, and UBIFS it has to report sligtly less free space to meet the
- * above expectetion.
- *
- * This function assumes free space is made up of uncompressed data nodes and
- * full index nodes (one per data node, doubled because we always allow enough
- * space to write the index twice).
- *
- * Note, the calculation is pessimistic, which means that most of the time
- * UBIFS reports less space than it actually has.
- */
-static inline long long ubifs_reported_space(const struct ubifs_info *c,
- uint64_t free)
-{
- int divisor, factor;
-
- divisor = UBIFS_MAX_DATA_NODE_SZ + (c->max_idx_node_sz * 3);
- factor = UBIFS_MAX_DATA_NODE_SZ - UBIFS_DATA_NODE_SZ;
- do_div(free, divisor);
-
- return free * factor;
-}
-
/**
* ubifs_current_time - round current time to time granularity.
* @inode: inode
current_fs_time(inode->i_sb) : CURRENT_TIME_SEC;
}
+/**
+ * ubifs_tnc_lookup - look up a file-system node.
+ * @c: UBIFS file-system description object
+ * @key: node key to lookup
+ * @node: the node is returned here
+ *
+ * This function look up and reads node with key @key. The caller has to make
+ * sure the @node buffer is large enough to fit the node. Returns zero in case
+ * of success, %-ENOENT if the node was not found, and a negative error code in
+ * case of failure.
+ */
+static inline int ubifs_tnc_lookup(struct ubifs_info *c,
+ const union ubifs_key *key, void *node)
+{
+ return ubifs_tnc_locate(c, key, node, NULL, NULL);
+}
+
#endif /* __UBIFS_MISC_H__ */
{
struct ubifs_info *c = dentry->d_sb->s_fs_info;
unsigned long long free;
+ __le32 *uuid = (__le32 *)c->uuid;
- free = ubifs_budg_get_free_space(c);
+ free = ubifs_get_free_space(c);
dbg_gen("free space %lld bytes (%lld blocks)",
free, free >> UBIFS_BLOCK_SHIFT);
buf->f_files = 0;
buf->f_ffree = 0;
buf->f_namelen = UBIFS_MAX_NLEN;
-
+ buf->f_fsid.val[0] = le32_to_cpu(uuid[0]) ^ le32_to_cpu(uuid[2]);
+ buf->f_fsid.val[1] = le32_to_cpu(uuid[1]) ^ le32_to_cpu(uuid[3]);
return 0;
}
c->dead_wm = ALIGN(MIN_WRITE_SZ, c->min_io_size);
c->dark_wm = ALIGN(UBIFS_MAX_NODE_SZ, c->min_io_size);
+ /*
+ * Calculate how many bytes would be wasted at the end of LEB if it was
+ * fully filled with data nodes of maximum size. This is used in
+ * calculations when reporting free space.
+ */
+ c->leb_overhead = c->leb_size % UBIFS_MAX_DATA_NODE_SZ;
return 0;
}
* internally because it does not make much sense for UBIFS, but it is
* necessary to report something for the 'statfs()' call.
*
- * Subtract the LEB reserved for GC and the LEB which is reserved for
- * deletions.
- *
- * Review 'ubifs_calc_available()' if changing this calculation.
+ * Subtract the LEB reserved for GC, the LEB which is reserved for
+ * deletions, and assume only one journal head is available.
*/
- tmp64 = c->main_lebs - 2;
- tmp64 *= (uint64_t)c->leb_size - c->dark_wm;
+ tmp64 = c->main_lebs - 2 - c->jhead_cnt + 1;
+ tmp64 *= (uint64_t)c->leb_size - c->leb_overhead;
tmp64 = ubifs_reported_space(c, tmp64);
c->block_cnt = tmp64 >> UBIFS_BLOCK_SHIFT;
goto out_dereg;
}
+ sprintf(c->bgt_name, BGT_NAME_PATTERN, c->vi.ubi_num, c->vi.vol_id);
if (!mounted_read_only) {
err = alloc_wbufs(c);
if (err)
goto out_cbuf;
/* Create background thread */
- sprintf(c->bgt_name, BGT_NAME_PATTERN, c->vi.ubi_num,
- c->vi.vol_id);
c->bgt = kthread_create(ubifs_bg_thread, c, c->bgt_name);
if (!c->bgt)
c->bgt = ERR_PTR(-EINVAL);
if (keys_cmp(c, key, &node_key) != 0)
ret = 0;
}
- if (ret == 0)
+ if (ret == 0 && c->replaying)
dbg_mnt("dangling branch LEB %d:%d len %d, key %s",
zbr->lnum, zbr->offs, zbr->len, DBGKEY(key));
return ret;
}
/**
- * ubifs_tnc_lookup - look up a file-system node.
+ * maybe_leb_gced - determine if a LEB may have been garbage collected.
* @c: UBIFS file-system description object
- * @key: node key to lookup
- * @node: the node is returned here
+ * @lnum: LEB number
+ * @gc_seq1: garbage collection sequence number
*
- * This function look up and reads node with key @key. The caller has to make
- * sure the @node buffer is large enough to fit the node. Returns zero in case
- * of success, %-ENOENT if the node was not found, and a negative error code in
- * case of failure.
+ * This function determines if @lnum may have been garbage collected since
+ * sequence number @gc_seq1. If it may have been then %1 is returned, otherwise
+ * %0 is returned.
*/
-int ubifs_tnc_lookup(struct ubifs_info *c, const union ubifs_key *key,
- void *node)
+static int maybe_leb_gced(struct ubifs_info *c, int lnum, int gc_seq1)
{
- int found, n, err;
- struct ubifs_znode *znode;
- struct ubifs_zbranch zbr, *zt;
+ int gc_seq2, gced_lnum;
- mutex_lock(&c->tnc_mutex);
- found = ubifs_lookup_level0(c, key, &znode, &n);
- if (!found) {
- err = -ENOENT;
- goto out;
- } else if (found < 0) {
- err = found;
- goto out;
- }
- zt = &znode->zbranch[n];
- if (is_hash_key(c, key)) {
- /*
- * In this case the leaf node cache gets used, so we pass the
- * address of the zbranch and keep the mutex locked
- */
- err = tnc_read_node_nm(c, zt, node);
- goto out;
- }
- zbr = znode->zbranch[n];
- mutex_unlock(&c->tnc_mutex);
-
- err = ubifs_tnc_read_node(c, &zbr, node);
- return err;
-
-out:
- mutex_unlock(&c->tnc_mutex);
- return err;
+ gced_lnum = c->gced_lnum;
+ smp_rmb();
+ gc_seq2 = c->gc_seq;
+ /* Same seq means no GC */
+ if (gc_seq1 == gc_seq2)
+ return 0;
+ /* Different by more than 1 means we don't know */
+ if (gc_seq1 + 1 != gc_seq2)
+ return 1;
+ /*
+ * We have seen the sequence number has increased by 1. Now we need to
+ * be sure we read the right LEB number, so read it again.
+ */
+ smp_rmb();
+ if (gced_lnum != c->gced_lnum)
+ return 1;
+ /* Finally we can check lnum */
+ if (gced_lnum == lnum)
+ return 1;
+ return 0;
}
/**
* @lnum: LEB number is returned here
* @offs: offset is returned here
*
- * This function is the same as 'ubifs_tnc_lookup()' but it returns the node
- * location also. See 'ubifs_tnc_lookup()'.
+ * This function look up and reads node with key @key. The caller has to make
+ * sure the @node buffer is large enough to fit the node. Returns zero in case
+ * of success, %-ENOENT if the node was not found, and a negative error code in
+ * case of failure. The node location can be returned in @lnum and @offs.
*/
int ubifs_tnc_locate(struct ubifs_info *c, const union ubifs_key *key,
void *node, int *lnum, int *offs)
{
- int found, n, err;
+ int found, n, err, safely = 0, gc_seq1;
struct ubifs_znode *znode;
struct ubifs_zbranch zbr, *zt;
+again:
mutex_lock(&c->tnc_mutex);
found = ubifs_lookup_level0(c, key, &znode, &n);
if (!found) {
goto out;
}
zt = &znode->zbranch[n];
+ if (lnum) {
+ *lnum = zt->lnum;
+ *offs = zt->offs;
+ }
if (is_hash_key(c, key)) {
/*
* In this case the leaf node cache gets used, so we pass the
* address of the zbranch and keep the mutex locked
*/
- *lnum = zt->lnum;
- *offs = zt->offs;
err = tnc_read_node_nm(c, zt, node);
goto out;
}
+ if (safely) {
+ err = ubifs_tnc_read_node(c, zt, node);
+ goto out;
+ }
+ /* Drop the TNC mutex prematurely and race with garbage collection */
zbr = znode->zbranch[n];
+ gc_seq1 = c->gc_seq;
mutex_unlock(&c->tnc_mutex);
- *lnum = zbr.lnum;
- *offs = zbr.offs;
+ if (ubifs_get_wbuf(c, zbr.lnum)) {
+ /* We do not GC journal heads */
+ err = ubifs_tnc_read_node(c, &zbr, node);
+ return err;
+ }
- err = ubifs_tnc_read_node(c, &zbr, node);
- return err;
+ err = fallible_read_node(c, key, &zbr, node);
+ if (err <= 0 || maybe_leb_gced(c, zbr.lnum, gc_seq1)) {
+ /*
+ * The node may have been GC'ed out from under us so try again
+ * while keeping the TNC mutex locked.
+ */
+ safely = 1;
+ goto again;
+ }
+ return 0;
out:
mutex_unlock(&c->tnc_mutex);
{
int found, n, err;
struct ubifs_znode *znode;
- struct ubifs_zbranch zbr;
dbg_tnc("name '%.*s' key %s", nm->len, nm->name, DBGKEY(key));
mutex_lock(&c->tnc_mutex);
goto out_unlock;
}
- zbr = znode->zbranch[n];
- mutex_unlock(&c->tnc_mutex);
-
- err = tnc_read_node_nm(c, &zbr, node);
- return err;
+ err = tnc_read_node_nm(c, &znode->zbranch[n], node);
out_unlock:
mutex_unlock(&c->tnc_mutex);
#define UBIFS_SK_LEN 8
/* Minimum index tree fanout */
-#define UBIFS_MIN_FANOUT 2
+#define UBIFS_MIN_FANOUT 3
/* Maximum number of levels in UBIFS indexing B-tree */
#define UBIFS_MAX_LEVELS 512
* @max_idx_node_sz: maximum indexing node aligned on 8-bytes boundary
* @max_inode_sz: maximum possible inode size in bytes
* @max_znode_sz: size of znode in bytes
+ *
+ * @leb_overhead: how many bytes are wasted in an LEB when it is filled with
+ * data nodes of maximum size - used in free space reporting
* @dead_wm: LEB dead space watermark
* @dark_wm: LEB dark space watermark
* @block_cnt: count of 4KiB blocks on the FS
* @sbuf: a buffer of LEB size used by GC and replay for scanning
* @idx_gc: list of index LEBs that have been garbage collected
* @idx_gc_cnt: number of elements on the idx_gc list
+ * @gc_seq: incremented for every non-index LEB garbage collected
+ * @gced_lnum: last non-index LEB that was garbage collected
*
* @infos_list: links all 'ubifs_info' objects
* @umount_mutex: serializes shrinker and un-mount
int max_idx_node_sz;
long long max_inode_sz;
int max_znode_sz;
+
+ int leb_overhead;
int dead_wm;
int dark_wm;
int block_cnt;
void *sbuf;
struct list_head idx_gc;
int idx_gc_cnt;
+ volatile int gc_seq;
+ volatile int gced_lnum;
struct list_head infos_list;
struct mutex umount_mutex;
struct ubifs_budget_req *req);
void ubifs_cancel_ino_op(struct ubifs_info *c, struct inode *inode,
struct ubifs_budget_req *req);
-long long ubifs_budg_get_free_space(struct ubifs_info *c);
+long long ubifs_get_free_space(struct ubifs_info *c);
int ubifs_calc_min_idx_lebs(struct ubifs_info *c);
void ubifs_convert_page_budget(struct ubifs_info *c);
+long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free);
long long ubifs_calc_available(const struct ubifs_info *c, int min_idx_lebs);
/* find.c */
/* tnc.c */
int ubifs_lookup_level0(struct ubifs_info *c, const union ubifs_key *key,
struct ubifs_znode **zn, int *n);
-int ubifs_tnc_lookup(struct ubifs_info *c, const union ubifs_key *key,
- void *node);
int ubifs_tnc_lookup_nm(struct ubifs_info *c, const union ubifs_key *key,
void *node, const struct qstr *nm);
int ubifs_tnc_locate(struct ubifs_info *c, const union ubifs_key *key,
.release = udf_release_file,
.fsync = udf_fsync_file,
.splice_read = generic_file_splice_read,
+ .llseek = generic_file_llseek,
};
const struct inode_operations udf_file_inode_operations = {
*err = -ENOSPC;
iinfo = UDF_I(inode);
- iinfo->i_unique = 0;
- iinfo->i_lenExtents = 0;
- iinfo->i_next_alloc_block = 0;
- iinfo->i_next_alloc_goal = 0;
- iinfo->i_strat4096 = 0;
+ if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_EXTENDED_FE)) {
+ iinfo->i_efe = 1;
+ if (UDF_VERS_USE_EXTENDED_FE > sbi->s_udfrev)
+ sbi->s_udfrev = UDF_VERS_USE_EXTENDED_FE;
+ iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
+ sizeof(struct extendedFileEntry),
+ GFP_KERNEL);
+ } else {
+ iinfo->i_efe = 0;
+ iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
+ sizeof(struct fileEntry),
+ GFP_KERNEL);
+ }
+ if (!iinfo->i_ext.i_data) {
+ iput(inode);
+ *err = -ENOMEM;
+ return NULL;
+ }
block = udf_new_block(dir->i_sb, NULL,
dinfo->i_location.partitionReferenceNum,
lvhd->uniqueID = cpu_to_le64(uniqueID);
mark_buffer_dirty(sbi->s_lvid_bh);
}
+ mutex_unlock(&sbi->s_alloc_mutex);
inode->i_mode = mode;
inode->i_uid = current->fsuid;
if (dir->i_mode & S_ISGID) {
iinfo->i_lenEAttr = 0;
iinfo->i_lenAlloc = 0;
iinfo->i_use = 0;
- if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_EXTENDED_FE)) {
- iinfo->i_efe = 1;
- if (UDF_VERS_USE_EXTENDED_FE > sbi->s_udfrev)
- sbi->s_udfrev = UDF_VERS_USE_EXTENDED_FE;
- iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
- sizeof(struct extendedFileEntry),
- GFP_KERNEL);
- } else {
- iinfo->i_efe = 0;
- iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
- sizeof(struct fileEntry),
- GFP_KERNEL);
- }
- if (!iinfo->i_ext.i_data) {
- iput(inode);
- *err = -ENOMEM;
- mutex_unlock(&sbi->s_alloc_mutex);
- return NULL;
- }
if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_AD_IN_ICB))
iinfo->i_alloc_type = ICBTAG_FLAG_AD_IN_ICB;
else if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_SHORT_AD))
iinfo->i_crtime = current_fs_time(inode->i_sb);
insert_inode_hash(inode);
mark_inode_dirty(inode);
- mutex_unlock(&sbi->s_alloc_mutex);
if (DQUOT_ALLOC_INODE(inode)) {
DQUOT_DROP(inode);
offset = (xfs_off_t)iblock << inode->i_blkbits;
ASSERT(bh_result->b_size >= (1 << inode->i_blkbits));
size = bh_result->b_size;
+
+ if (!create && direct && offset >= i_size_read(inode))
+ return 0;
+
error = xfs_iomap(XFS_I(inode), offset, size,
create ? flags : BMAPI_READ, &iomap, &niomap);
if (error)
mp->m_flags &= ~XFS_MOUNT_BARRIER;
break;
default:
+ /*
+ * Logically we would return an error here to prevent
+ * users from believing they might have changed
+ * mount options using remount which can't be changed.
+ *
+ * But unfortunately mount(8) adds all options from
+ * mtab and fstab to the mount arguments in some cases
+ * so we can't blindly reject options, but have to
+ * check for each specified option if it actually
+ * differs from the currently set option and only
+ * reject it if that's the case.
+ *
+ * Until that is implemented we return success for
+ * every remount request, and silently ignore all
+ * options that we can't actually change.
+ */
+#if 0
printk(KERN_INFO
"XFS: mount option \"%s\" not supported for remount\n", p);
return -EINVAL;
+#else
+ return 0;
+#endif
}
}
bip->bli_item.li_ops = &xfs_buf_item_ops;
bip->bli_item.li_mountp = mp;
bip->bli_buf = bp;
+ xfs_buf_hold(bp);
bip->bli_format.blf_type = XFS_LI_BUF;
bip->bli_format.blf_blkno = (__int64_t)XFS_BUF_ADDR(bp);
bip->bli_format.blf_len = (ushort)BTOBB(XFS_BUF_COUNT(bp));
return (bip->bli_flags & XFS_BLI_DIRTY);
}
+STATIC void
+xfs_buf_item_free(
+ xfs_buf_log_item_t *bip)
+{
+#ifdef XFS_TRANS_DEBUG
+ kmem_free(bip->bli_orig);
+ kmem_free(bip->bli_logged);
+#endif /* XFS_TRANS_DEBUG */
+
+#ifdef XFS_BLI_TRACE
+ ktrace_free(bip->bli_trace);
+#endif
+ kmem_zone_free(xfs_buf_item_zone, bip);
+}
+
/*
* This is called when the buf log item is no longer needed. It should
* free the buf log item associated with the given buffer and clear
(XFS_BUF_IODONE_FUNC(bp) != NULL)) {
XFS_BUF_CLR_IODONE_FUNC(bp);
}
-
-#ifdef XFS_TRANS_DEBUG
- kmem_free(bip->bli_orig);
- bip->bli_orig = NULL;
- kmem_free(bip->bli_logged);
- bip->bli_logged = NULL;
-#endif /* XFS_TRANS_DEBUG */
-
-#ifdef XFS_BLI_TRACE
- ktrace_free(bip->bli_trace);
-#endif
- kmem_zone_free(xfs_buf_item_zone, bip);
+ xfs_buf_rele(bp);
+ xfs_buf_item_free(bip);
}
ASSERT(bip->bli_buf == bp);
+ xfs_buf_rele(bp);
mp = bip->bli_item.li_mountp;
/*
* xfs_trans_delete_ail() drops the AIL lock.
*/
xfs_trans_delete_ail(mp, (xfs_log_item_t *)bip);
-
-#ifdef XFS_TRANS_DEBUG
- kmem_free(bip->bli_orig);
- bip->bli_orig = NULL;
- kmem_free(bip->bli_logged);
- bip->bli_logged = NULL;
-#endif /* XFS_TRANS_DEBUG */
-
-#ifdef XFS_BLI_TRACE
- ktrace_free(bip->bli_trace);
-#endif
- kmem_zone_free(xfs_buf_item_zone, bip);
+ xfs_buf_item_free(bip);
}
#if defined(XFS_BLI_TRACE)
sbp = &sxp->sx_stat;
- xfs_lock_two_inodes(ip, tip, lock_flags);
+ /*
+ * we have to do two separate lock calls here to keep lockdep
+ * happy. If we try to get all the locks in one call, lock will
+ * report false positives when we drop the ILOCK and regain them
+ * below.
+ */
+ xfs_lock_two_inodes(ip, tip, XFS_IOLOCK_EXCL);
+ xfs_lock_two_inodes(ip, tip, XFS_ILOCK_EXCL);
locked = 1;
/* Verify that both files have the same format */
ASSERT(nextents <= XFS_LINEAR_EXTS);
size = nextents * sizeof(xfs_bmbt_rec_t);
- xfs_iext_irec_compact_full(ifp);
+ xfs_iext_irec_compact_pages(ifp);
ASSERT(ifp->if_real_bytes == XFS_IEXT_BUFSZ);
ep = ifp->if_u1.if_ext_irec->er_extbuf;
* compaction policy is as follows:
*
* Full Compaction: Extents fit into a single page (or inline buffer)
- * Full Compaction: Extents occupy less than 10% of allocated space
- * Partial Compaction: Extents occupy > 10% and < 50% of allocated space
+ * Partial Compaction: Extents occupy less than 50% of allocated space
* No Compaction: Extents occupy at least 50% of allocated space
*/
void
xfs_iext_direct_to_inline(ifp, nextents);
} else if (nextents <= XFS_LINEAR_EXTS) {
xfs_iext_indirect_to_direct(ifp);
- } else if (nextents < (nlists * XFS_LINEAR_EXTS) >> 3) {
- xfs_iext_irec_compact_full(ifp);
} else if (nextents < (nlists * XFS_LINEAR_EXTS) >> 1) {
xfs_iext_irec_compact_pages(ifp);
}
erp_next = erp + 1;
if (erp_next->er_extcount <=
(XFS_LINEAR_EXTS - erp->er_extcount)) {
- memmove(&erp->er_extbuf[erp->er_extcount],
+ memcpy(&erp->er_extbuf[erp->er_extcount],
erp_next->er_extbuf, erp_next->er_extcount *
sizeof(xfs_bmbt_rec_t));
erp->er_extcount += erp_next->er_extcount;
}
}
-/*
- * Fully compact the extent records managed by the indirection array.
- */
-void
-xfs_iext_irec_compact_full(
- xfs_ifork_t *ifp) /* inode fork pointer */
-{
- xfs_bmbt_rec_host_t *ep, *ep_next; /* extent record pointers */
- xfs_ext_irec_t *erp, *erp_next; /* extent irec pointers */
- int erp_idx = 0; /* extent irec index */
- int ext_avail; /* empty entries in ex list */
- int ext_diff; /* number of exts to add */
- int nlists; /* number of irec's (ex lists) */
-
- ASSERT(ifp->if_flags & XFS_IFEXTIREC);
-
- nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ;
- erp = ifp->if_u1.if_ext_irec;
- ep = &erp->er_extbuf[erp->er_extcount];
- erp_next = erp + 1;
- ep_next = erp_next->er_extbuf;
-
- while (erp_idx < nlists - 1) {
- /*
- * Check how many extent records are available in this irec.
- * If there is none skip the whole exercise.
- */
- ext_avail = XFS_LINEAR_EXTS - erp->er_extcount;
- if (ext_avail) {
-
- /*
- * Copy over as many as possible extent records into
- * the previous page.
- */
- ext_diff = MIN(ext_avail, erp_next->er_extcount);
- memcpy(ep, ep_next, ext_diff * sizeof(xfs_bmbt_rec_t));
- erp->er_extcount += ext_diff;
- erp_next->er_extcount -= ext_diff;
-
- /*
- * If the next irec is empty now we can simply
- * remove it.
- */
- if (erp_next->er_extcount == 0) {
- /*
- * Free page before removing extent record
- * so er_extoffs don't get modified in
- * xfs_iext_irec_remove.
- */
- kmem_free(erp_next->er_extbuf);
- erp_next->er_extbuf = NULL;
- xfs_iext_irec_remove(ifp, erp_idx + 1);
- erp = &ifp->if_u1.if_ext_irec[erp_idx];
- nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ;
-
- /*
- * If the next irec is not empty move up the content
- * that has not been copied to the previous page to
- * the beggining of this one.
- */
- } else {
- memmove(erp_next->er_extbuf, &ep_next[ext_diff],
- erp_next->er_extcount *
- sizeof(xfs_bmbt_rec_t));
- ep_next = erp_next->er_extbuf;
- memset(&ep_next[erp_next->er_extcount], 0,
- (XFS_LINEAR_EXTS -
- erp_next->er_extcount) *
- sizeof(xfs_bmbt_rec_t));
- }
- }
-
- if (erp->er_extcount == XFS_LINEAR_EXTS) {
- erp_idx++;
- if (erp_idx < nlists)
- erp = &ifp->if_u1.if_ext_irec[erp_idx];
- else
- break;
- }
- ep = &erp->er_extbuf[erp->er_extcount];
- erp_next = erp + 1;
- ep_next = erp_next->er_extbuf;
- }
-}
-
/*
* This is called to update the er_extoff field in the indirection
* array when extents have been added or removed from one of the
STATIC int xlog_iclogs_empty(xlog_t *log);
#if defined(XFS_LOG_TRACE)
+
+#define XLOG_TRACE_LOGGRANT_SIZE 2048
+#define XLOG_TRACE_ICLOG_SIZE 256
+
+void
+xlog_trace_loggrant_alloc(xlog_t *log)
+{
+ log->l_grant_trace = ktrace_alloc(XLOG_TRACE_LOGGRANT_SIZE, KM_NOFS);
+}
+
+void
+xlog_trace_loggrant_dealloc(xlog_t *log)
+{
+ ktrace_free(log->l_grant_trace);
+}
+
void
xlog_trace_loggrant(xlog_t *log, xlog_ticket_t *tic, xfs_caddr_t string)
{
unsigned long cnts;
- if (!log->l_grant_trace) {
- log->l_grant_trace = ktrace_alloc(2048, KM_NOSLEEP);
- if (!log->l_grant_trace)
- return;
- }
/* ticket counts are 1 byte each */
cnts = ((unsigned long)tic->t_ocnt) | ((unsigned long)tic->t_cnt) << 8;
(void *)((unsigned long)tic->t_unit_res));
}
+void
+xlog_trace_iclog_alloc(xlog_in_core_t *iclog)
+{
+ iclog->ic_trace = ktrace_alloc(XLOG_TRACE_ICLOG_SIZE, KM_NOFS);
+}
+
+void
+xlog_trace_iclog_dealloc(xlog_in_core_t *iclog)
+{
+ ktrace_free(iclog->ic_trace);
+}
+
void
xlog_trace_iclog(xlog_in_core_t *iclog, uint state)
{
- if (!iclog->ic_trace)
- iclog->ic_trace = ktrace_alloc(256, KM_NOFS);
ktrace_enter(iclog->ic_trace,
(void *)((unsigned long)state),
(void *)((unsigned long)current_pid()),
(void *)NULL, (void *)NULL);
}
#else
+
+#define xlog_trace_loggrant_alloc(log)
+#define xlog_trace_loggrant_dealloc(log)
#define xlog_trace_loggrant(log,tic,string)
+
+#define xlog_trace_iclog_alloc(iclog)
+#define xlog_trace_iclog_dealloc(iclog)
#define xlog_trace_iclog(iclog,state)
+
#endif /* XFS_LOG_TRACE */
* layer, it means the underlyin device no longer supports
* barrier I/O. Warn loudly and turn off barriers.
*/
- if ((l->l_mp->m_flags & XFS_MOUNT_BARRIER) && !XFS_BUF_ORDERED(bp)) {
+ if ((l->l_mp->m_flags & XFS_MOUNT_BARRIER) && !XFS_BUF_ISORDERED(bp)) {
l->l_mp->m_flags &= ~XFS_MOUNT_BARRIER;
xfs_fs_cmn_err(CE_WARN, l->l_mp,
"xlog_iodone: Barriers are no longer supported"
spin_lock_init(&log->l_grant_lock);
sv_init(&log->l_flush_wait, 0, "flush_wait");
+ xlog_trace_loggrant_alloc(log);
/* log record size must be multiple of BBSIZE; see xlog_rec_header_t */
ASSERT((XFS_BUF_SIZE(bp) & BBMASK) == 0);
sv_init(&iclog->ic_force_wait, SV_DEFAULT, "iclog-force");
sv_init(&iclog->ic_write_wait, SV_DEFAULT, "iclog-write");
+ xlog_trace_iclog_alloc(iclog);
+
iclogp = &iclog->ic_next;
}
*iclogp = log->l_iclog; /* complete ring */
sv_destroy(&iclog->ic_force_wait);
sv_destroy(&iclog->ic_write_wait);
xfs_buf_free(iclog->ic_bp);
-#ifdef XFS_LOG_TRACE
- if (iclog->ic_trace != NULL) {
- ktrace_free(iclog->ic_trace);
- }
-#endif
+ xlog_trace_iclog_dealloc(iclog);
next_iclog = iclog->ic_next;
kmem_free(iclog);
iclog = next_iclog;
spinlock_destroy(&log->l_grant_lock);
xfs_buf_free(log->l_xbuf);
-#ifdef XFS_LOG_TRACE
- if (log->l_trace != NULL) {
- ktrace_free(log->l_trace);
- }
- if (log->l_grant_trace != NULL) {
- ktrace_free(log->l_grant_trace);
- }
-#endif
+ xlog_trace_loggrant_dealloc(log);
log->l_mp->m_log = NULL;
kmem_free(log);
} /* xlog_dealloc_log */
int l_grant_write_bytes;
#ifdef XFS_LOG_TRACE
- struct ktrace *l_trace;
struct ktrace *l_grant_trace;
#endif
#endif
}
+/*
+ * xfs_lock_two_inodes() can only be used to lock one type of lock
+ * at a time - the iolock or the ilock, but not both at once. If
+ * we lock both at once, lockdep will report false positives saying
+ * we have violated locking orders.
+ */
void
xfs_lock_two_inodes(
xfs_inode_t *ip0,
int attempts = 0;
xfs_log_item_t *lp;
+ if (lock_mode & (XFS_IOLOCK_SHARED|XFS_IOLOCK_EXCL))
+ ASSERT((lock_mode & (XFS_ILOCK_SHARED|XFS_ILOCK_EXCL)) == 0);
ASSERT(ip0->i_ino != ip1->i_ino);
if (ip0->i_ino > ip1->i_ino) {
/*
* Zero file bytes between startoff and endoff inclusive.
* The iolock is held exclusive and no blocks are buffered.
+ *
+ * This function is used by xfs_free_file_space() to zero
+ * partial blocks when the range to free is not block aligned.
+ * When unreserving space with boundaries that are not block
+ * aligned we round up the start and round down the end
+ * boundaries and then use this function to zero the parts of
+ * the blocks that got dropped during the rounding.
*/
STATIC int
xfs_zero_remaining_bytes(
int nimap;
int error = 0;
+ /*
+ * Avoid doing I/O beyond eof - it's not necessary
+ * since nothing can read beyond eof. The space will
+ * be zeroed when the file is extended anyway.
+ */
+ if (startoff >= ip->i_size)
+ return 0;
+
+ if (endoff > ip->i_size)
+ endoff = ip->i_size;
+
bp = xfs_buf_get_noaddr(mp->m_sb.sb_blocksize,
XFS_IS_REALTIME_INODE(ip) ?
mp->m_rtdev_targp : mp->m_ddev_targp);
-ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
+ $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
header-y += kvm.h
endif
-ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
+ $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
unifdef-y += a.out.h
endif
unifdef-y += auxvec.h
unlikely(__ret_warn_once); \
})
+#define WARN_ONCE(condition, format...) ({ \
+ static int __warned; \
+ int __ret_warn_once = !!(condition); \
+ \
+ if (unlikely(__ret_warn_once)) \
+ if (WARN(!__warned, format)) \
+ __warned = 1; \
+ unlikely(__ret_warn_once); \
+})
+
#define WARN_ON_RATELIMIT(condition, state) \
WARN_ON((condition) && __ratelimit(state))
extern char __initdata_begin[], __initdata_end[];
extern char __start_rodata[], __end_rodata[];
+/* function descriptor handling (if any). Override
+ * in asm/sections.h */
+#ifndef dereference_function_descriptor
+#define dereference_function_descriptor(p) (p)
+#endif
+
#endif /* _ASM_GENERIC_SECTIONS_H_ */
* @args: array of argument values to store
*
* Changes @n arguments to the system call starting with the @i'th argument.
- * @n'th argument to @val. Argument @i gets value @args[0], and so on.
+ * Argument @i gets value @args[0], and so on.
* An arch inline version is probably optimal when @i and @n are constants.
*
* It's only valid to call this when @task is stopped for tracing on
}
extern void (*flush_icache_range)(unsigned long start, unsigned long end);
+extern void (*local_flush_icache_range)(unsigned long start, unsigned long end);
extern void (*__flush_cache_vmap)(void);
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Kevin D. Kissell
+ */
+
+/*
+ * Definitions used for common event timer implementation
+ * for MIPS 4K-type processors and their MIPS MT variants.
+ * Avoids unsightly extern declarations in C files.
+ */
+#ifndef __ASM_CEVT_R4K_H
+#define __ASM_CEVT_R4K_H
+
+DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
+
+void mips_event_handler(struct clock_event_device *dev);
+int c0_compare_int_usable(void);
+void mips_set_clock_mode(enum clock_event_mode, struct clock_event_device *);
+irqreturn_t c0_compare_interrupt(int, void *);
+
+extern struct irqaction c0_compare_irqaction;
+extern int cp0_timer_irq_installed;
+
+/*
+ * Possibly handle a performance counter interrupt.
+ * Return true if the timer interrupt should not be checked
+ */
+
+static inline int handle_perf_irq(int r2)
+{
+ /*
+ * The performance counter overflow interrupt may be shared with the
+ * timer interrupt (cp0_perfcount_irq < 0). If it is and a
+ * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
+ * and we can't reliably determine if a counter interrupt has also
+ * happened (!r2) then don't check for a timer interrupt.
+ */
+ return (cp0_perfcount_irq < 0) &&
+ perf_irq() == IRQ_HANDLED &&
+ !r2;
+}
+
+#endif /* __ASM_CEVT_R4K_H */
" .set pop \n"
" .endm");
+extern void smtc_ipi_replay(void);
+
static inline void raw_local_irq_enable(void)
{
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * SMTC kernel needs to do a software replay of queued
+ * IPIs, at the cost of call overhead on each local_irq_enable()
+ */
+ smtc_ipi_replay();
+#endif
__asm__ __volatile__(
"raw_local_irq_enable"
: /* no outputs */
: "memory");
}
+
/*
* For cli() we have to insert nops to make sure that the new value
* has actually arrived in the status register before the end of this
" .set pop \n"
" .endm \n");
-extern void smtc_ipi_replay(void);
static inline void raw_local_irq_restore(unsigned long flags)
{
unsigned long __tmp1;
-#ifdef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY
+#ifdef CONFIG_MIPS_MT_SMTC
/*
- * CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY does prompt replay of deferred
+ * SMTC kernel needs to do a software replay of queued
* IPIs, at the cost of branch and call overhead on each
* local_irq_restore()
*/
: "memory");
}
+static inline void __raw_local_irq_restore(unsigned long flags)
+{
+ unsigned long __tmp1;
+
+ __asm__ __volatile__(
+ "raw_local_irq_restore\t%0"
+ : "=r" (__tmp1)
+ : "0" (flags)
+ : "memory");
+}
+
static inline int raw_irqs_disabled_flags(unsigned long flags)
{
#ifdef CONFIG_MIPS_MT_SMTC
{ \
unsigned int res; \
unsigned int omt; \
- unsigned int flags; \
+ unsigned long flags; \
\
local_irq_save(flags); \
omt = __dmt(); \
{ \
unsigned int res; \
unsigned int omt; \
- unsigned int flags; \
+ unsigned long flags; \
\
local_irq_save(flags); \
omt = __dmt(); \
{ \
unsigned int res; \
unsigned int omt; \
- unsigned int flags; \
+ unsigned long flags; \
\
local_irq_save(flags); \
\
#define PMD_ORDER 1
#define PTE_ORDER 0
-#define PTRS_PER_PGD ((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t))
+#define PTRS_PER_PGD (USER_PTRS_PER_PGD * 2)
#define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
#define USER_PTRS_PER_PGD (0x80000000UL/PGDIR_SIZE)
*/
#include <asm/mips_mt.h>
+#include <asm/smtc_ipi.h>
/*
* System-wide SMTC status information
struct task_struct;
void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu);
-
+void self_ipi(struct smtc_ipi *);
void smtc_flush_tlb_asid(unsigned long asid);
-extern int mipsmt_build_cpu_map(int startslot);
-extern void mipsmt_prepare_cpus(void);
+extern int smtc_build_cpu_map(int startslot);
+extern void smtc_prepare_cpus(int cpus);
extern void smtc_smp_finish(void);
extern void smtc_boot_secondary(int cpu, struct task_struct *t);
extern void smtc_cpus_done(void);
+
/*
* Sharing the TLB between multiple VPEs means that the
* "random" index selection function is not allowed to
#ifdef CONFIG_MIPS_MT_SMTC
.set mips32r2
/*
- * This may not really be necessary if ints are already
- * inhibited here.
+ * We need to make sure the read-modify-write
+ * of Status below isn't perturbed by an interrupt
+ * or cross-TC access, so we need to do at least a DMT,
+ * protected by an interrupt-inhibit. But setting IXMT
+ * also creates a few-cycle window where an IPI could
+ * be queued and not be detected before potentially
+ * returning to a WAIT or user-mode loop. It must be
+ * replayed.
+ *
+ * We're in the middle of a context switch, and
+ * we can't dispatch it directly without trashing
+ * some registers, so we'll try to detect this unlikely
+ * case and program a software interrupt in the VPE,
+ * as would be done for a cross-VPE IPI. To accomodate
+ * the handling of that case, we're doing a DVPE instead
+ * of just a DMT here to protect against other threads.
+ * This is a lot of cruft to cover a tiny window.
+ * If you can find a better design, implement it!
+ *
*/
mfc0 v0, CP0_TCSTATUS
ori v0, TCSTATUS_IXMT
mtc0 v0, CP0_TCSTATUS
_ehb
- DMT 5 # dmt a1
+ DVPE 5 # dvpe a1
jal mips_ihb
#endif /* CONFIG_MIPS_MT_SMTC */
mfc0 a0, CP0_STATUS
*/
LONG_L v1, PT_TCSTATUS(sp)
_ehb
- mfc0 v0, CP0_TCSTATUS
+ mfc0 a0, CP0_TCSTATUS
andi v1, TCSTATUS_IXMT
- /* We know that TCStatua.IXMT should be set from above */
- xori v0, v0, TCSTATUS_IXMT
- or v0, v0, v1
- mtc0 v0, CP0_TCSTATUS
- _ehb
- andi a1, a1, VPECONTROL_TE
+ bnez v1, 0f
+
+/*
+ * We'd like to detect any IPIs queued in the tiny window
+ * above and request an software interrupt to service them
+ * when we ERET.
+ *
+ * Computing the offset into the IPIQ array of the executing
+ * TC's IPI queue in-line would be tedious. We use part of
+ * the TCContext register to hold 16 bits of offset that we
+ * can add in-line to find the queue head.
+ */
+ mfc0 v0, CP0_TCCONTEXT
+ la a2, IPIQ
+ srl v0, v0, 16
+ addu a2, a2, v0
+ LONG_L v0, 0(a2)
+ beqz v0, 0f
+/*
+ * If we have a queue, provoke dispatch within the VPE by setting C_SW1
+ */
+ mfc0 v0, CP0_CAUSE
+ ori v0, v0, C_SW1
+ mtc0 v0, CP0_CAUSE
+0:
+ /*
+ * This test should really never branch but
+ * let's be prudent here. Having atomized
+ * the shared register modifications, we can
+ * now EVPE, and must do so before interrupts
+ * are potentially re-enabled.
+ */
+ andi a1, a1, MVPCONTROL_EVP
beqz a1, 1f
- emt
+ evpe
1:
+ /* We know that TCStatua.IXMT should be set from above */
+ xori a0, a0, TCSTATUS_IXMT
+ or a0, a0, v1
+ mtc0 a0, CP0_TCSTATUS
+ _ehb
+
.set mips0
#endif /* CONFIG_MIPS_MT_SMTC */
LONG_L v1, PT_EPC(sp)
/* nothing to see, move along */
#include <asm-generic/sections.h>
+#ifdef CONFIG_64BIT
+#undef dereference_function_descriptor
+void *dereference_function_descriptor(void *);
+#endif
+
#endif
* 2 of the Licence, or (at your option) any later version.
*/
-#ifndef _ASM_A_OUT_CORE_H
-#define _ASM_A_OUT_CORE_H
+#ifndef ASM_X86__A_OUT_CORE_H
+#define ASM_X86__A_OUT_CORE_H
#ifdef __KERNEL__
#ifdef CONFIG_X86_32
#endif /* CONFIG_X86_32 */
#endif /* __KERNEL__ */
-#endif /* _ASM_A_OUT_CORE_H */
+#endif /* ASM_X86__A_OUT_CORE_H */
-#ifndef _ASM_X86_A_OUT_H
-#define _ASM_X86_A_OUT_H
+#ifndef ASM_X86__A_OUT_H
+#define ASM_X86__A_OUT_H
struct exec
{
#define N_DRSIZE(a) ((a).a_drsize)
#define N_SYMSIZE(a) ((a).a_syms)
-#endif /* _ASM_X86_A_OUT_H */
+#endif /* ASM_X86__A_OUT_H */
-#ifndef _ASM_X86_ACPI_H
-#define _ASM_X86_ACPI_H
+#ifndef ASM_X86__ACPI_H
+#define ASM_X86__ACPI_H
/*
* Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
boot_cpu_data.x86_model <= 0x05 &&
boot_cpu_data.x86_mask < 0x0A)
return 1;
+ else if (boot_cpu_has(X86_FEATURE_AMDC1E))
+ return 1;
else
return max_cstate;
}
#define acpi_unlazy_tlb(x) leave_mm(x)
-#endif /*__X86_ASM_ACPI_H*/
+#endif /* ASM_X86__ACPI_H */
-#ifndef _ASM_X86_AGP_H
-#define _ASM_X86_AGP_H
+#ifndef ASM_X86__AGP_H
+#define ASM_X86__AGP_H
#include <asm/pgtable.h>
#include <asm/cacheflush.h>
#define free_gatt_pages(table, order) \
free_pages((unsigned long)(table), (order))
-#endif
+#endif /* ASM_X86__AGP_H */
-#ifndef _ASM_X86_ALTERNATIVE_H
-#define _ASM_X86_ALTERNATIVE_H
+#ifndef ASM_X86__ALTERNATIVE_H
+#define ASM_X86__ALTERNATIVE_H
#include <linux/types.h>
#include <linux/stddef.h>
extern void *text_poke(void *addr, const void *opcode, size_t len);
extern void *text_poke_early(void *addr, const void *opcode, size_t len);
-#endif /* _ASM_X86_ALTERNATIVE_H */
+#endif /* ASM_X86__ALTERNATIVE_H */
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#ifndef _ASM_X86_AMD_IOMMU_H
-#define _ASM_X86_AMD_IOMMU_H
+#ifndef ASM_X86__AMD_IOMMU_H
+#define ASM_X86__AMD_IOMMU_H
#ifdef CONFIG_AMD_IOMMU
extern int amd_iommu_init(void);
static inline void amd_iommu_detect(void) { }
#endif
-#endif
+#endif /* ASM_X86__AMD_IOMMU_H */
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#ifndef __AMD_IOMMU_TYPES_H__
-#define __AMD_IOMMU_TYPES_H__
+#ifndef ASM_X86__AMD_IOMMU_TYPES_H
+#define ASM_X86__AMD_IOMMU_TYPES_H
#include <linux/types.h>
#include <linux/list.h>
return (((u16)bus) << 8) | devfn;
}
-#endif
+#endif /* ASM_X86__AMD_IOMMU_TYPES_H */
-#ifndef _ASM_X86_APIC_H
-#define _ASM_X86_APIC_H
+#ifndef ASM_X86__APIC_H
+#define ASM_X86__APIC_H
#include <linux/pm.h>
#include <linux/delay.h>
#endif
extern int is_vsmp_box(void);
+extern void xapic_wait_icr_idle(void);
+extern u32 safe_xapic_wait_icr_idle(void);
+extern u64 xapic_icr_read(void);
+extern void xapic_icr_write(u32, u32);
+extern int setup_profiling_timer(unsigned int);
static inline void native_apic_write(unsigned long reg, u32 v)
{
static inline void ack_APIC_irq(void)
{
/*
- * ack_APIC_irq() actually gets compiled as a single instruction:
- * - a single rmw on Pentium/82489DX
- * - a single write on P6+ cores (CONFIG_X86_GOOD_APIC)
+ * ack_APIC_irq() actually gets compiled as a single instruction
* ... yummie.
*/
#endif /* !CONFIG_X86_LOCAL_APIC */
-#endif /* __ASM_APIC_H */
+#endif /* ASM_X86__APIC_H */
-#ifndef _ASM_X86_APICDEF_H
-#define _ASM_X86_APICDEF_H
+#ifndef ASM_X86__APICDEF_H
+#define ASM_X86__APICDEF_H
/*
* Constants for various Intel APICs. (local APIC, IOAPIC, etc.)
#else
#define BAD_APICID 0xFFFFu
#endif
-#endif
+#endif /* ASM_X86__APICDEF_H */
-#ifndef _ASM_ARCH_HOOKS_H
-#define _ASM_ARCH_HOOKS_H
+#ifndef ASM_X86__ARCH_HOOKS_H
+#define ASM_X86__ARCH_HOOKS_H
#include <linux/interrupt.h>
extern void time_init_hook(void);
extern void mca_nmi_hook(void);
-#endif
+#endif /* ASM_X86__ARCH_HOOKS_H */
-#ifndef _ASM_X86_ASM_H
-#define _ASM_X86_ASM_H
+#ifndef ASM_X86__ASM_H
+#define ASM_X86__ASM_H
#ifdef __ASSEMBLY__
# define __ASM_FORM(x) x
#define _ASM_PTR __ASM_SEL(.long, .quad)
#define _ASM_ALIGN __ASM_SEL(.balign 4, .balign 8)
-#define _ASM_MOV_UL __ASM_SIZE(mov)
+#define _ASM_MOV __ASM_SIZE(mov)
#define _ASM_INC __ASM_SIZE(inc)
#define _ASM_DEC __ASM_SIZE(dec)
#define _ASM_ADD __ASM_SIZE(add)
#define _ASM_SUB __ASM_SIZE(sub)
#define _ASM_XADD __ASM_SIZE(xadd)
+
#define _ASM_AX __ASM_REG(ax)
#define _ASM_BX __ASM_REG(bx)
#define _ASM_CX __ASM_REG(cx)
#define _ASM_DX __ASM_REG(dx)
+#define _ASM_SP __ASM_REG(sp)
+#define _ASM_BP __ASM_REG(bp)
+#define _ASM_SI __ASM_REG(si)
+#define _ASM_DI __ASM_REG(di)
/* Exception table entry */
# define _ASM_EXTABLE(from,to) \
_ASM_PTR #from "," #to "\n" \
" .previous\n"
-#endif /* _ASM_X86_ASM_H */
+#endif /* ASM_X86__ASM_H */
-#ifndef __ARCH_I386_ATOMIC__
-#define __ARCH_I386_ATOMIC__
+#ifndef ASM_X86__ATOMIC_32_H
+#define ASM_X86__ATOMIC_32_H
#include <linux/compiler.h>
#include <asm/processor.h>
#define smp_mb__after_atomic_inc() barrier()
#include <asm-generic/atomic.h>
-#endif
+#endif /* ASM_X86__ATOMIC_32_H */
-#ifndef __ARCH_X86_64_ATOMIC__
-#define __ARCH_X86_64_ATOMIC__
+#ifndef ASM_X86__ATOMIC_64_H
+#define ASM_X86__ATOMIC_64_H
#include <asm/alternative.h>
#include <asm/cmpxchg.h>
#define smp_mb__after_atomic_inc() barrier()
#include <asm-generic/atomic.h>
-#endif
+#endif /* ASM_X86__ATOMIC_64_H */
-#ifndef _ASM_X86_AUXVEC_H
-#define _ASM_X86_AUXVEC_H
+#ifndef ASM_X86__AUXVEC_H
+#define ASM_X86__AUXVEC_H
/*
* Architecture-neutral AT_ values in 0-17, leave some room
* for more of them, start the x86-specific ones at 32.
#endif
#define AT_SYSINFO_EHDR 33
-#endif
+#endif /* ASM_X86__AUXVEC_H */
-#ifndef _MACH_BIOS_EBDA_H
-#define _MACH_BIOS_EBDA_H
+#ifndef ASM_X86__BIOS_EBDA_H
+#define ASM_X86__BIOS_EBDA_H
#include <asm/io.h>
void reserve_ebda_region(void);
-#endif /* _MACH_BIOS_EBDA_H */
+#endif /* ASM_X86__BIOS_EBDA_H */
-#ifndef _ASM_X86_BITOPS_H
-#define _ASM_X86_BITOPS_H
+#ifndef ASM_X86__BITOPS_H
+#define ASM_X86__BITOPS_H
/*
* Copyright 1992, Linus Torvalds.
#include <asm-generic/bitops/minix.h>
#endif /* __KERNEL__ */
-#endif /* _ASM_X86_BITOPS_H */
+#endif /* ASM_X86__BITOPS_H */
-#ifndef _ASM_BOOT_H
-#define _ASM_BOOT_H
+#ifndef ASM_X86__BOOT_H
+#define ASM_X86__BOOT_H
/* Don't touch these, unless you really know what you're doing. */
#define DEF_INITSEG 0x9000
#define BOOT_STACK_SIZE 0x1000
#endif
-#endif /* _ASM_BOOT_H */
+#endif /* ASM_X86__BOOT_H */
-#ifndef _ASM_BOOTPARAM_H
-#define _ASM_BOOTPARAM_H
+#ifndef ASM_X86__BOOTPARAM_H
+#define ASM_X86__BOOTPARAM_H
#include <linux/types.h>
#include <linux/screen_info.h>
__u8 _pad9[276]; /* 0xeec */
} __attribute__((packed));
-#endif /* _ASM_BOOTPARAM_H */
+#endif /* ASM_X86__BOOTPARAM_H */
-#ifndef _ASM_X86_BUG_H
-#define _ASM_X86_BUG_H
+#ifndef ASM_X86__BUG_H
+#define ASM_X86__BUG_H
#ifdef CONFIG_BUG
#define HAVE_ARCH_BUG
#endif /* !CONFIG_BUG */
#include <asm-generic/bug.h>
-#endif
+#endif /* ASM_X86__BUG_H */
-#ifndef _ASM_X86_BUGS_H
-#define _ASM_X86_BUGS_H
+#ifndef ASM_X86__BUGS_H
+#define ASM_X86__BUGS_H
extern void check_bugs(void);
int ppro_with_ram_bug(void);
-#endif /* _ASM_X86_BUGS_H */
+#endif /* ASM_X86__BUGS_H */
-#ifndef _ASM_X86_BYTEORDER_H
-#define _ASM_X86_BYTEORDER_H
+#ifndef ASM_X86__BYTEORDER_H
+#define ASM_X86__BYTEORDER_H
#include <asm/types.h>
#include <linux/compiler.h>
#include <linux/byteorder/little_endian.h>
-#endif /* _ASM_X86_BYTEORDER_H */
+#endif /* ASM_X86__BYTEORDER_H */
-#ifndef _ARCH_X86_CACHE_H
-#define _ARCH_X86_CACHE_H
+#ifndef ASM_X86__CACHE_H
+#define ASM_X86__CACHE_H
/* L1 cache line size */
#define L1_CACHE_SHIFT (CONFIG_X86_L1_CACHE_SHIFT)
#endif
#endif
-#endif
+#endif /* ASM_X86__CACHE_H */
-#ifndef _ASM_X86_CACHEFLUSH_H
-#define _ASM_X86_CACHEFLUSH_H
+#ifndef ASM_X86__CACHEFLUSH_H
+#define ASM_X86__CACHEFLUSH_H
/* Keep includes the same across arches. */
#include <linux/mm.h>
}
#endif
-#endif
+#endif /* ASM_X86__CACHEFLUSH_H */
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#ifndef _ASM_X86_64_CALGARY_H
-#define _ASM_X86_64_CALGARY_H
+#ifndef ASM_X86__CALGARY_H
+#define ASM_X86__CALGARY_H
#include <linux/spinlock.h>
#include <linux/device.h>
static inline void detect_calgary(void) { return; }
#endif
-#endif /* _ASM_X86_64_CALGARY_H */
+#endif /* ASM_X86__CALGARY_H */
-#ifndef _I386_CHECKSUM_H
-#define _I386_CHECKSUM_H
+#ifndef ASM_X86__CHECKSUM_32_H
+#define ASM_X86__CHECKSUM_32_H
#include <linux/in6.h>
return (__force __wsum)-1; /* invalid checksum */
}
-#endif
+#endif /* ASM_X86__CHECKSUM_32_H */
-#ifndef _X86_64_CHECKSUM_H
-#define _X86_64_CHECKSUM_H
+#ifndef ASM_X86__CHECKSUM_64_H
+#define ASM_X86__CHECKSUM_64_H
/*
* Checksums for x86-64
return a;
}
-#endif
+#endif /* ASM_X86__CHECKSUM_64_H */
-#ifndef __ASM_CMPXCHG_H
-#define __ASM_CMPXCHG_H
+#ifndef ASM_X86__CMPXCHG_32_H
+#define ASM_X86__CMPXCHG_32_H
#include <linux/bitops.h> /* for LOCK_PREFIX */
#endif
-#endif
+#endif /* ASM_X86__CMPXCHG_32_H */
-#ifndef __ASM_CMPXCHG_H
-#define __ASM_CMPXCHG_H
+#ifndef ASM_X86__CMPXCHG_64_H
+#define ASM_X86__CMPXCHG_64_H
#include <asm/alternative.h> /* Provides LOCK_PREFIX */
cmpxchg_local((ptr), (o), (n)); \
})
-#endif
+#endif /* ASM_X86__CMPXCHG_64_H */
-#ifndef _ASM_X86_64_COMPAT_H
-#define _ASM_X86_64_COMPAT_H
+#ifndef ASM_X86__COMPAT_H
+#define ASM_X86__COMPAT_H
/*
* Architecture specific compatibility types
return current_thread_info()->status & TS_COMPAT;
}
-#endif /* _ASM_X86_64_COMPAT_H */
+#endif /* ASM_X86__COMPAT_H */
-#ifndef _ASM_I386_CPU_H_
-#define _ASM_I386_CPU_H_
+#ifndef ASM_X86__CPU_H
+#define ASM_X86__CPU_H
#include <linux/device.h>
#include <linux/cpu.h>
#endif
DECLARE_PER_CPU(int, cpu_state);
-#endif /* _ASM_I386_CPU_H_ */
+#endif /* ASM_X86__CPU_H */
/*
* Defines x86 CPU feature bits
*/
-#ifndef _ASM_X86_CPUFEATURE_H
-#define _ASM_X86_CPUFEATURE_H
+#ifndef ASM_X86__CPUFEATURE_H
+#define ASM_X86__CPUFEATURE_H
#include <asm/required-features.h>
#define X86_FEATURE_UP (3*32+ 9) /* smp kernel running on up */
#define X86_FEATURE_FXSAVE_LEAK (3*32+10) /* FXSAVE leaks FOP/FIP/FOP */
#define X86_FEATURE_ARCH_PERFMON (3*32+11) /* Intel Architectural PerfMon */
-#define X86_FEATURE_PEBS (3*32+12) /* Precise-Event Based Sampling */
-#define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */
-#define X86_FEATURE_SYSCALL32 (3*32+14) /* syscall in ia32 userspace */
-#define X86_FEATURE_SYSENTER32 (3*32+15) /* sysenter in ia32 userspace */
+#define X86_FEATURE_PEBS (3*32+12) /* Precise-Event Based Sampling */
+#define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */
+#define X86_FEATURE_SYSCALL32 (3*32+14) /* syscall in ia32 userspace */
+#define X86_FEATURE_SYSENTER32 (3*32+15) /* sysenter in ia32 userspace */
#define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well on this CPU */
#define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* Mfence synchronizes RDTSC */
#define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */
-#define X86_FEATURE_11AP (3*32+19) /* Bad local APIC aka 11AP */
+#define X86_FEATURE_11AP (3*32+19) /* Bad local APIC aka 11AP */
+#define X86_FEATURE_NOPL (3*32+20) /* The NOPL (0F 1F) instructions */
+#define X86_FEATURE_AMDC1E (3*32+21) /* AMD C1E detected */
/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
#define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */
#endif /* defined(__KERNEL__) && !defined(__ASSEMBLY__) */
-#endif /* _ASM_X86_CPUFEATURE_H */
+#endif /* ASM_X86__CPUFEATURE_H */
-#ifndef _X86_CURRENT_H
-#define _X86_CURRENT_H
+#ifndef ASM_X86__CURRENT_H
+#define ASM_X86__CURRENT_H
#ifdef CONFIG_X86_32
#include <linux/compiler.h>
#define current get_current()
-#endif /* X86_CURRENT_H */
+#endif /* ASM_X86__CURRENT_H */
-#ifndef _ASM_X86_DEBUGREG_H
-#define _ASM_X86_DEBUGREG_H
+#ifndef ASM_X86__DEBUGREG_H
+#define ASM_X86__DEBUGREG_H
/* Indicate the register numbers for a number of the specific
#define DR_LOCAL_SLOWDOWN (0x100) /* Local slow the pipeline */
#define DR_GLOBAL_SLOWDOWN (0x200) /* Global slow the pipeline */
-#endif
+#endif /* ASM_X86__DEBUGREG_H */
-#ifndef _ASM_X86_DELAY_H
-#define _ASM_X86_DELAY_H
+#ifndef ASM_X86__DELAY_H
+#define ASM_X86__DELAY_H
/*
* Copyright (C) 1993 Linus Torvalds
void use_tsc_delay(void);
-#endif /* _ASM_X86_DELAY_H */
+#endif /* ASM_X86__DELAY_H */
-#ifndef _ASM_DESC_H_
-#define _ASM_DESC_H_
+#ifndef ASM_X86__DESC_H
+#define ASM_X86__DESC_H
#ifndef __ASSEMBLY__
#include <asm/desc_defs.h>
#endif /* __ASSEMBLY__ */
-#endif
+#endif /* ASM_X86__DESC_H */
/* Written 2000 by Andi Kleen */
-#ifndef __ARCH_DESC_DEFS_H
-#define __ARCH_DESC_DEFS_H
+#ifndef ASM_X86__DESC_DEFS_H
+#define ASM_X86__DESC_DEFS_H
/*
* Segment descriptor structure definitions, usable from both x86_64 and i386
#endif /* !__ASSEMBLY__ */
-#endif
+#endif /* ASM_X86__DESC_DEFS_H */
-#ifndef _ASM_X86_DEVICE_H
-#define _ASM_X86_DEVICE_H
+#ifndef ASM_X86__DEVICE_H
+#define ASM_X86__DEVICE_H
struct dev_archdata {
#ifdef CONFIG_ACPI
#endif
};
-#endif /* _ASM_X86_DEVICE_H */
+#endif /* ASM_X86__DEVICE_H */
-#ifndef _ASM_X86_DIV64_H
-#define _ASM_X86_DIV64_H
+#ifndef ASM_X86__DIV64_H
+#define ASM_X86__DIV64_H
#ifdef CONFIG_X86_32
# include <asm-generic/div64.h>
#endif /* CONFIG_X86_32 */
-#endif /* _ASM_X86_DIV64_H */
+#endif /* ASM_X86__DIV64_H */
-#ifndef _ASM_DMA_MAPPING_H_
-#define _ASM_DMA_MAPPING_H_
+#ifndef ASM_X86__DMA_MAPPING_H
+#define ASM_X86__DMA_MAPPING_H
/*
* IOMMU interface. See Documentation/DMA-mapping.txt and DMA-API.txt for
#define dma_is_consistent(d, h) (1)
#include <asm-generic/dma-coherent.h>
-#endif
+#endif /* ASM_X86__DMA_MAPPING_H */
* and John Boyd, Nov. 1992.
*/
-#ifndef _ASM_X86_DMA_H
-#define _ASM_X86_DMA_H
+#ifndef ASM_X86__DMA_H
+#define ASM_X86__DMA_H
#include <linux/spinlock.h> /* And spinlocks */
#include <asm/io.h> /* need byte IO */
#define isa_dma_bridge_buggy (0)
#endif
-#endif /* _ASM_X86_DMA_H */
+#endif /* ASM_X86__DMA_H */
-#ifndef _ASM_X86_DMI_H
-#define _ASM_X86_DMI_H
+#ifndef ASM_X86__DMI_H
+#define ASM_X86__DMI_H
#include <asm/io.h>
#define dmi_ioremap early_ioremap
#define dmi_iounmap early_iounmap
-#endif
+#endif /* ASM_X86__DMI_H */
* Debug Store (DS) support
*
* This provides a low-level interface to the hardware's Debug Store
- * feature that is used for last branch recording (LBR) and
+ * feature that is used for branch trace store (BTS) and
* precise-event based sampling (PEBS).
*
- * Different architectures use a different DS layout/pointer size.
- * The below functions therefore work on a void*.
+ * It manages:
+ * - per-thread and per-cpu allocation of BTS and PEBS
+ * - buffer memory allocation (optional)
+ * - buffer overflow handling
+ * - buffer access
*
+ * It assumes:
+ * - get_task_struct on all parameter tasks
+ * - current is allowed to trace parameter tasks
*
- * Since there is no user for PEBS, yet, only LBR (or branch
- * trace store, BTS) is supported.
*
- *
- * Copyright (C) 2007 Intel Corporation.
- * Markus Metzger <markus.t.metzger@intel.com>, Dec 2007
+ * Copyright (C) 2007-2008 Intel Corporation.
+ * Markus Metzger <markus.t.metzger@intel.com>, 2007-2008
*/
-#ifndef _ASM_X86_DS_H
-#define _ASM_X86_DS_H
+#ifndef ASM_X86__DS_H
+#define ASM_X86__DS_H
+
+#ifdef CONFIG_X86_DS
#include <linux/types.h>
#include <linux/init.h>
-struct cpuinfo_x86;
+struct task_struct;
-/* a branch trace record entry
+/*
+ * Request BTS or PEBS
+ *
+ * Due to alignement constraints, the actual buffer may be slightly
+ * smaller than the requested or provided buffer.
*
- * In order to unify the interface between various processor versions,
- * we use the below data structure for all processors.
+ * Returns 0 on success; -Eerrno otherwise
+ *
+ * task: the task to request recording for;
+ * NULL for per-cpu recording on the current cpu
+ * base: the base pointer for the (non-pageable) buffer;
+ * NULL if buffer allocation requested
+ * size: the size of the requested or provided buffer
+ * ovfl: pointer to a function to be called on buffer overflow;
+ * NULL if cyclic buffer requested
*/
-enum bts_qualifier {
- BTS_INVALID = 0,
- BTS_BRANCH,
- BTS_TASK_ARRIVES,
- BTS_TASK_DEPARTS
-};
+typedef void (*ds_ovfl_callback_t)(struct task_struct *);
+extern int ds_request_bts(struct task_struct *task, void *base, size_t size,
+ ds_ovfl_callback_t ovfl);
+extern int ds_request_pebs(struct task_struct *task, void *base, size_t size,
+ ds_ovfl_callback_t ovfl);
-struct bts_struct {
- u64 qualifier;
- union {
- /* BTS_BRANCH */
- struct {
- u64 from_ip;
- u64 to_ip;
- } lbr;
- /* BTS_TASK_ARRIVES or
- BTS_TASK_DEPARTS */
- u64 jiffies;
- } variant;
+/*
+ * Release BTS or PEBS resources
+ *
+ * Frees buffers allocated on ds_request.
+ *
+ * Returns 0 on success; -Eerrno otherwise
+ *
+ * task: the task to release resources for;
+ * NULL to release resources for the current cpu
+ */
+extern int ds_release_bts(struct task_struct *task);
+extern int ds_release_pebs(struct task_struct *task);
+
+/*
+ * Return the (array) index of the write pointer.
+ * (assuming an array of BTS/PEBS records)
+ *
+ * Returns -Eerrno on error
+ *
+ * task: the task to access;
+ * NULL to access the current cpu
+ * pos (out): if not NULL, will hold the result
+ */
+extern int ds_get_bts_index(struct task_struct *task, size_t *pos);
+extern int ds_get_pebs_index(struct task_struct *task, size_t *pos);
+
+/*
+ * Return the (array) index one record beyond the end of the array.
+ * (assuming an array of BTS/PEBS records)
+ *
+ * Returns -Eerrno on error
+ *
+ * task: the task to access;
+ * NULL to access the current cpu
+ * pos (out): if not NULL, will hold the result
+ */
+extern int ds_get_bts_end(struct task_struct *task, size_t *pos);
+extern int ds_get_pebs_end(struct task_struct *task, size_t *pos);
+
+/*
+ * Provide a pointer to the BTS/PEBS record at parameter index.
+ * (assuming an array of BTS/PEBS records)
+ *
+ * The pointer points directly into the buffer. The user is
+ * responsible for copying the record.
+ *
+ * Returns the size of a single record on success; -Eerrno on error
+ *
+ * task: the task to access;
+ * NULL to access the current cpu
+ * index: the index of the requested record
+ * record (out): pointer to the requested record
+ */
+extern int ds_access_bts(struct task_struct *task,
+ size_t index, const void **record);
+extern int ds_access_pebs(struct task_struct *task,
+ size_t index, const void **record);
+
+/*
+ * Write one or more BTS/PEBS records at the write pointer index and
+ * advance the write pointer.
+ *
+ * If size is not a multiple of the record size, trailing bytes are
+ * zeroed out.
+ *
+ * May result in one or more overflow notifications.
+ *
+ * If called during overflow handling, that is, with index >=
+ * interrupt threshold, the write will wrap around.
+ *
+ * An overflow notification is given if and when the interrupt
+ * threshold is reached during or after the write.
+ *
+ * Returns the number of bytes written or -Eerrno.
+ *
+ * task: the task to access;
+ * NULL to access the current cpu
+ * buffer: the buffer to write
+ * size: the size of the buffer
+ */
+extern int ds_write_bts(struct task_struct *task,
+ const void *buffer, size_t size);
+extern int ds_write_pebs(struct task_struct *task,
+ const void *buffer, size_t size);
+
+/*
+ * Same as ds_write_bts/pebs, but omit ownership checks.
+ *
+ * This is needed to have some other task than the owner of the
+ * BTS/PEBS buffer or the parameter task itself write into the
+ * respective buffer.
+ */
+extern int ds_unchecked_write_bts(struct task_struct *task,
+ const void *buffer, size_t size);
+extern int ds_unchecked_write_pebs(struct task_struct *task,
+ const void *buffer, size_t size);
+
+/*
+ * Reset the write pointer of the BTS/PEBS buffer.
+ *
+ * Returns 0 on success; -Eerrno on error
+ *
+ * task: the task to access;
+ * NULL to access the current cpu
+ */
+extern int ds_reset_bts(struct task_struct *task);
+extern int ds_reset_pebs(struct task_struct *task);
+
+/*
+ * Clear the BTS/PEBS buffer and reset the write pointer.
+ * The entire buffer will be zeroed out.
+ *
+ * Returns 0 on success; -Eerrno on error
+ *
+ * task: the task to access;
+ * NULL to access the current cpu
+ */
+extern int ds_clear_bts(struct task_struct *task);
+extern int ds_clear_pebs(struct task_struct *task);
+
+/*
+ * Provide the PEBS counter reset value.
+ *
+ * Returns 0 on success; -Eerrno on error
+ *
+ * task: the task to access;
+ * NULL to access the current cpu
+ * value (out): the counter reset value
+ */
+extern int ds_get_pebs_reset(struct task_struct *task, u64 *value);
+
+/*
+ * Set the PEBS counter reset value.
+ *
+ * Returns 0 on success; -Eerrno on error
+ *
+ * task: the task to access;
+ * NULL to access the current cpu
+ * value: the new counter reset value
+ */
+extern int ds_set_pebs_reset(struct task_struct *task, u64 value);
+
+/*
+ * Initialization
+ */
+struct cpuinfo_x86;
+extern void __cpuinit ds_init_intel(struct cpuinfo_x86 *);
+
+
+
+/*
+ * The DS context - part of struct thread_struct.
+ */
+struct ds_context {
+ /* pointer to the DS configuration; goes into MSR_IA32_DS_AREA */
+ unsigned char *ds;
+ /* the owner of the BTS and PEBS configuration, respectively */
+ struct task_struct *owner[2];
+ /* buffer overflow notification function for BTS and PEBS */
+ ds_ovfl_callback_t callback[2];
+ /* the original buffer address */
+ void *buffer[2];
+ /* the number of allocated pages for on-request allocated buffers */
+ unsigned int pages[2];
+ /* use count */
+ unsigned long count;
+ /* a pointer to the context location inside the thread_struct
+ * or the per_cpu context array */
+ struct ds_context **this;
+ /* a pointer to the task owning this context, or NULL, if the
+ * context is owned by a cpu */
+ struct task_struct *task;
};
-/* Overflow handling mechanisms */
-#define DS_O_SIGNAL 1 /* send overflow signal */
-#define DS_O_WRAP 2 /* wrap around */
-
-extern int ds_allocate(void **, size_t);
-extern int ds_free(void **);
-extern int ds_get_bts_size(void *);
-extern int ds_get_bts_end(void *);
-extern int ds_get_bts_index(void *);
-extern int ds_set_overflow(void *, int);
-extern int ds_get_overflow(void *);
-extern int ds_clear(void *);
-extern int ds_read_bts(void *, int, struct bts_struct *);
-extern int ds_write_bts(void *, const struct bts_struct *);
-extern unsigned long ds_debugctl_mask(void);
-extern void __cpuinit ds_init_intel(struct cpuinfo_x86 *c);
-
-#endif /* _ASM_X86_DS_H */
+/* called by exit_thread() to free leftover contexts */
+extern void ds_free(struct ds_context *context);
+
+#else /* CONFIG_X86_DS */
+
+#define ds_init_intel(config) do {} while (0)
+
+#endif /* CONFIG_X86_DS */
+#endif /* ASM_X86__DS_H */
-#ifndef _DWARF2_H
-#define _DWARF2_H
+#ifndef ASM_X86__DWARF2_H
+#define ASM_X86__DWARF2_H
#ifndef __ASSEMBLY__
#warning "asm/dwarf2.h should be only included in pure assembly files"
#endif
-#endif
+#endif /* ASM_X86__DWARF2_H */
-#ifndef __ASM_E820_H
-#define __ASM_E820_H
+#ifndef ASM_X86__E820_H
+#define ASM_X86__E820_H
#define E820MAP 0x2d0 /* our map */
#define E820MAX 128 /* number of entries in E820MAP */
extern struct e820map e820;
extern struct e820map e820_saved;
+extern unsigned long pci_mem_start;
extern int e820_any_mapped(u64 start, u64 end, unsigned type);
extern int e820_all_mapped(u64 start, u64 end, unsigned type);
extern void e820_add_region(u64 start, u64 size, int type);
#define HIGH_MEMORY (1024*1024)
#endif /* __KERNEL__ */
-#endif /* __ASM_E820_H */
+#endif /* ASM_X86__E820_H */
-#ifndef _ASM_X86_EDAC_H
-#define _ASM_X86_EDAC_H
+#ifndef ASM_X86__EDAC_H
+#define ASM_X86__EDAC_H
/* ECC atomic, DMA, SMP and interrupt safe scrub function */
asm volatile("lock; addl $0, %0"::"m" (*virt_addr));
}
-#endif
+#endif /* ASM_X86__EDAC_H */
-#ifndef _ASM_X86_EFI_H
-#define _ASM_X86_EFI_H
+#ifndef ASM_X86__EFI_H
+#define ASM_X86__EFI_H
#ifdef CONFIG_X86_32
extern void efi_call_phys_prelog(void);
extern void efi_call_phys_epilog(void);
-#endif
+#endif /* ASM_X86__EFI_H */
-#ifndef _ASM_X86_ELF_H
-#define _ASM_X86_ELF_H
+#ifndef ASM_X86__ELF_H
+#define ASM_X86__ELF_H
/*
* ELF register definitions..
static inline void start_ia32_thread(struct pt_regs *regs, u32 ip, u32 sp)
{
- asm volatile("movl %0,%%fs" :: "r" (0));
- asm volatile("movl %0,%%es; movl %0,%%ds" : : "r" (__USER32_DS));
+ loadsegment(fs, 0);
+ loadsegment(ds, __USER32_DS);
+ loadsegment(es, __USER32_DS);
load_gs_index(0);
regs->ip = ip;
regs->sp = sp;
extern unsigned long arch_randomize_brk(struct mm_struct *mm);
#define arch_randomize_brk arch_randomize_brk
-#endif
+#endif /* ASM_X86__ELF_H */
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
+#ifndef ASM_X86__EMERGENCY_RESTART_H
+#define ASM_X86__EMERGENCY_RESTART_H
enum reboot_type {
BOOT_TRIPLE = 't',
extern void machine_emergency_restart(void);
-#endif /* _ASM_EMERGENCY_RESTART_H */
+#endif /* ASM_X86__EMERGENCY_RESTART_H */
-#ifndef _ASM_X86_FB_H
-#define _ASM_X86_FB_H
+#ifndef ASM_X86__FB_H
+#define ASM_X86__FB_H
#include <linux/fb.h>
#include <linux/fs.h>
static inline int fb_is_primary_device(struct fb_info *info) { return 0; }
#endif
-#endif /* _ASM_X86_FB_H */
+#endif /* ASM_X86__FB_H */
-#ifndef _ASM_FIXMAP_H
-#define _ASM_FIXMAP_H
+#ifndef ASM_X86__FIXMAP_H
+#define ASM_X86__FIXMAP_H
#ifdef CONFIG_X86_32
# include "fixmap_32.h"
BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
return __virt_to_fix(vaddr);
}
-#endif
+#endif /* ASM_X86__FIXMAP_H */
* Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
*/
-#ifndef _ASM_FIXMAP_32_H
-#define _ASM_FIXMAP_32_H
+#ifndef ASM_X86__FIXMAP_32_H
+#define ASM_X86__FIXMAP_32_H
/* used by vmalloc.c, vsyscall.lds.S.
#define FIXADDR_BOOT_START (FIXADDR_TOP - __FIXADDR_BOOT_SIZE)
#endif /* !__ASSEMBLY__ */
-#endif
+#endif /* ASM_X86__FIXMAP_32_H */
* Copyright (C) 1998 Ingo Molnar
*/
-#ifndef _ASM_FIXMAP_64_H
-#define _ASM_FIXMAP_64_H
+#ifndef ASM_X86__FIXMAP_64_H
+#define ASM_X86__FIXMAP_64_H
#include <linux/kernel.h>
#include <asm/acpi.h>
#define FIXADDR_USER_START ((unsigned long)VSYSCALL32_VSYSCALL)
#define FIXADDR_USER_END (FIXADDR_USER_START + PAGE_SIZE)
-#endif
+#endif /* ASM_X86__FIXMAP_64_H */
*
* Copyright (C) 1995
*/
-#ifndef _ASM_X86_FLOPPY_H
-#define _ASM_X86_FLOPPY_H
+#ifndef ASM_X86__FLOPPY_H
+#define ASM_X86__FLOPPY_H
#include <linux/vmalloc.h>
#define EXTRA_FLOPPY_PARAMS
-#endif /* _ASM_X86_FLOPPY_H */
+#endif /* ASM_X86__FLOPPY_H */
-#ifndef _ASM_X86_FTRACE
-#define _ASM_X86_FTRACE
+#ifndef ASM_X86__FTRACE_H
+#define ASM_X86__FTRACE_H
#ifdef CONFIG_FTRACE
#define MCOUNT_ADDR ((long)(mcount))
#endif /* CONFIG_FTRACE */
-#endif /* _ASM_X86_FTRACE */
+#endif /* ASM_X86__FTRACE_H */
-#ifndef _ASM_X86_FUTEX_H
-#define _ASM_X86_FUTEX_H
+#ifndef ASM_X86__FUTEX_H
+#define ASM_X86__FUTEX_H
#ifdef __KERNEL__
asm volatile("1:\tmovl %2, %0\n" \
"\tmovl\t%0, %3\n" \
"\t" insn "\n" \
- "2:\tlock; cmpxchgl %3, %2\n" \
+ "2:\t" LOCK_PREFIX "cmpxchgl %3, %2\n" \
"\tjnz\t1b\n" \
"3:\t.section .fixup,\"ax\"\n" \
"4:\tmov\t%5, %1\n" \
__futex_atomic_op1("xchgl %0, %2", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_ADD:
- __futex_atomic_op1("lock; xaddl %0, %2", ret, oldval,
+ __futex_atomic_op1(LOCK_PREFIX "xaddl %0, %2", ret, oldval,
uaddr, oparg);
break;
case FUTEX_OP_OR:
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
return -EFAULT;
- asm volatile("1:\tlock; cmpxchgl %3, %1\n"
+ asm volatile("1:\t" LOCK_PREFIX "cmpxchgl %3, %1\n"
"2:\t.section .fixup, \"ax\"\n"
"3:\tmov %2, %0\n"
"\tjmp 2b\n"
}
#endif
-#endif
+#endif /* ASM_X86__FUTEX_H */
-#ifndef _ASM_X8664_GART_H
-#define _ASM_X8664_GART_H 1
+#ifndef ASM_X86__GART_H
+#define ASM_X86__GART_H
#include <asm/e820.h>
return 0;
if (aper_base + aper_size > 0x100000000ULL) {
- printk(KERN_ERR "Aperture beyond 4GB. Ignoring.\n");
+ printk(KERN_INFO "Aperture beyond 4GB. Ignoring.\n");
return 0;
}
if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) {
- printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n");
+ printk(KERN_INFO "Aperture pointing to e820 RAM. Ignoring.\n");
return 0;
}
if (aper_size < min_size) {
- printk(KERN_ERR "Aperture too small (%d MB) than (%d MB)\n",
+ printk(KERN_INFO "Aperture too small (%d MB) than (%d MB)\n",
aper_size>>20, min_size>>20);
return 0;
}
return 1;
}
-#endif
+#endif /* ASM_X86__GART_H */
-#ifndef _ASM_GENAPIC_H
-#define _ASM_GENAPIC_H 1
+#ifndef ASM_X86__GENAPIC_32_H
+#define ASM_X86__GENAPIC_32_H
#include <asm/mpspec.h>
#define uv_system_init() do {} while (0)
-#endif
+#endif /* ASM_X86__GENAPIC_32_H */
-#ifndef _ASM_GENAPIC_H
-#define _ASM_GENAPIC_H 1
+#ifndef ASM_X86__GENAPIC_64_H
+#define ASM_X86__GENAPIC_64_H
/*
* Copyright 2004 James Cleverdon, IBM.
extern void setup_apic_routing(void);
-#endif
+#endif /* ASM_X86__GENAPIC_64_H */
* as published by the Free Software Foundation.
*/
-#ifndef _ASM_GEODE_H_
-#define _ASM_GEODE_H_
+#ifndef ASM_X86__GEODE_H
+#define ASM_X86__GEODE_H
#include <asm/processor.h>
#include <linux/io.h>
static inline int mfgpt_timer_setup(void) { return 0; }
#endif
-#endif
+#endif /* ASM_X86__GEODE_H */
#endif /* CONFIG_GPIOLIB */
-#endif /* _ASM_I386_GPIO_H */
+#endif /* ASM_X86__GPIO_H */
-#ifndef __ASM_HARDIRQ_H
-#define __ASM_HARDIRQ_H
+#ifndef ASM_X86__HARDIRQ_32_H
+#define ASM_X86__HARDIRQ_32_H
#include <linux/threads.h>
#include <linux/irq.h>
void ack_bad_irq(unsigned int irq);
#include <linux/irq_cpustat.h>
-#endif /* __ASM_HARDIRQ_H */
+#endif /* ASM_X86__HARDIRQ_32_H */
-#ifndef __ASM_HARDIRQ_H
-#define __ASM_HARDIRQ_H
+#ifndef ASM_X86__HARDIRQ_64_H
+#define ASM_X86__HARDIRQ_64_H
#include <linux/threads.h>
#include <linux/irq.h>
extern void ack_bad_irq(unsigned int irq);
-#endif /* __ASM_HARDIRQ_H */
+#endif /* ASM_X86__HARDIRQ_64_H */
* Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
*/
-#ifndef _ASM_HIGHMEM_H
-#define _ASM_HIGHMEM_H
+#ifndef ASM_X86__HIGHMEM_H
+#define ASM_X86__HIGHMEM_H
#ifdef __KERNEL__
#endif /* __KERNEL__ */
-#endif /* _ASM_HIGHMEM_H */
+#endif /* ASM_X86__HIGHMEM_H */
-#ifndef ASM_X86_HPET_H
-#define ASM_X86_HPET_H
+#ifndef ASM_X86__HPET_H
+#define ASM_X86__HPET_H
#ifdef CONFIG_HPET_TIMER
#define hpet_readl(a) 0
#endif
-#endif /* ASM_X86_HPET_H */
+#endif /* ASM_X86__HPET_H */
-#ifndef _ASM_X86_HUGETLB_H
-#define _ASM_X86_HUGETLB_H
+#ifndef ASM_X86__HUGETLB_H
+#define ASM_X86__HUGETLB_H
#include <asm/page.h>
{
}
-#endif /* _ASM_X86_HUGETLB_H */
+#endif /* ASM_X86__HUGETLB_H */
-#ifndef _ASM_HW_IRQ_H
-#define _ASM_HW_IRQ_H
+#ifndef ASM_X86__HW_IRQ_H
+#define ASM_X86__HW_IRQ_H
/*
* (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
extern asmlinkage void qic_enable_irq_interrupt(void);
extern asmlinkage void qic_call_function_interrupt(void);
+/* SMP */
+extern void smp_apic_timer_interrupt(struct pt_regs *);
+#ifdef CONFIG_X86_32
+extern void smp_spurious_interrupt(struct pt_regs *);
+extern void smp_error_interrupt(struct pt_regs *);
+#else
+extern asmlinkage void smp_spurious_interrupt(void);
+extern asmlinkage void smp_error_interrupt(void);
+#endif
+#ifdef CONFIG_X86_SMP
+extern void smp_reschedule_interrupt(struct pt_regs *);
+extern void smp_call_function_interrupt(struct pt_regs *);
+extern void smp_call_function_single_interrupt(struct pt_regs *);
+#ifdef CONFIG_X86_32
+extern void smp_invalidate_interrupt(struct pt_regs *);
+#else
+extern asmlinkage void smp_invalidate_interrupt(struct pt_regs *);
+#endif
+#endif
+
#ifdef CONFIG_X86_32
extern void (*const interrupt[NR_IRQS])(void);
#else
#endif /* !ASSEMBLY_ */
-#endif
+#endif /* ASM_X86__HW_IRQ_H */
-#ifndef ASM_HYPERTRANSPORT_H
-#define ASM_HYPERTRANSPORT_H
+#ifndef ASM_X86__HYPERTRANSPORT_H
+#define ASM_X86__HYPERTRANSPORT_H
/*
* Constants for x86 Hypertransport Interrupts.
#define HT_IRQ_HIGH_DEST_ID(v) \
((((v) >> 8) << HT_IRQ_HIGH_DEST_ID_SHIFT) & HT_IRQ_HIGH_DEST_ID_MASK)
-#endif /* ASM_HYPERTRANSPORT_H */
+#endif /* ASM_X86__HYPERTRANSPORT_H */
* x86-64 work by Andi Kleen 2002
*/
-#ifndef _ASM_X86_I387_H
-#define _ASM_X86_I387_H
+#ifndef ASM_X86__I387_H
+#define ASM_X86__I387_H
#include <linux/sched.h>
#include <linux/kernel_stat.h>
extern int init_fpu(struct task_struct *child);
extern asmlinkage void math_state_restore(void);
extern void init_thread_xstate(void);
+extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
extern user_regset_active_fn fpregs_active, xfpregs_active;
extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get;
}
}
-#endif /* _ASM_X86_I387_H */
+#endif /* ASM_X86__I387_H */
-#ifndef __ASM_I8253_H__
-#define __ASM_I8253_H__
+#ifndef ASM_X86__I8253_H
+#define ASM_X86__I8253_H
/* i8253A PIT registers */
#define PIT_MODE 0x43
#define inb_pit inb_p
#define outb_pit outb_p
-#endif /* __ASM_I8253_H__ */
+#endif /* ASM_X86__I8253_H */
-#ifndef __ASM_I8259_H__
-#define __ASM_I8259_H__
+#ifndef ASM_X86__I8259_H
+#define ASM_X86__I8259_H
#include <linux/delay.h>
extern struct irq_chip i8259A_chip;
-#endif /* __ASM_I8259_H__ */
+#endif /* ASM_X86__I8259_H */
-#ifndef _ASM_X86_64_IA32_H
-#define _ASM_X86_64_IA32_H
+#ifndef ASM_X86__IA32_H
+#define ASM_X86__IA32_H
#ifdef CONFIG_IA32_EMULATION
#endif /* !CONFIG_IA32_SUPPORT */
-#endif
+#endif /* ASM_X86__IA32_H */
-#ifndef _ASM_X86_64_IA32_UNISTD_H_
-#define _ASM_X86_64_IA32_UNISTD_H_
+#ifndef ASM_X86__IA32_UNISTD_H
+#define ASM_X86__IA32_UNISTD_H
/*
* This file contains the system call numbers of the ia32 port,
#define __NR_ia32_sigreturn 119
#define __NR_ia32_rt_sigreturn 173
-#endif /* _ASM_X86_64_IA32_UNISTD_H_ */
+#endif /* ASM_X86__IA32_UNISTD_H */
-#ifndef _ASM_X86_64_IDLE_H
-#define _ASM_X86_64_IDLE_H 1
+#ifndef ASM_X86__IDLE_H
+#define ASM_X86__IDLE_H
#define IDLE_START 1
#define IDLE_END 2
void enter_idle(void);
void exit_idle(void);
-#endif
+void c1e_remove_cpu(int cpu);
+
+#endif /* ASM_X86__IDLE_H */
-#ifndef _ASM_X86_INTEL_ARCH_PERFMON_H
-#define _ASM_X86_INTEL_ARCH_PERFMON_H
+#ifndef ASM_X86__INTEL_ARCH_PERFMON_H
+#define ASM_X86__INTEL_ARCH_PERFMON_H
#define MSR_ARCH_PERFMON_PERFCTR0 0xc1
#define MSR_ARCH_PERFMON_PERFCTR1 0xc2
unsigned int full;
};
-#endif /* _ASM_X86_INTEL_ARCH_PERFMON_H */
+#endif /* ASM_X86__INTEL_ARCH_PERFMON_H */
-#ifndef _ASM_X86_IO_H
-#define _ASM_X86_IO_H
+#ifndef ASM_X86__IO_H
+#define ASM_X86__IO_H
#define ARCH_HAS_IOREMAP_WC
#define writeq writeq
#endif
+extern int iommu_bio_merge;
+
#ifdef CONFIG_X86_32
# include "io_32.h"
#else
extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
-#endif /* _ASM_X86_IO_H */
+#endif /* ASM_X86__IO_H */
-#ifndef _ASM_IO_H
-#define _ASM_IO_H
+#ifndef ASM_X86__IO_32_H
+#define ASM_X86__IO_32_H
#include <linux/string.h>
#include <linux/compiler.h>
BUILDIO(w, w, short)
BUILDIO(l, , int)
-#endif
+#endif /* ASM_X86__IO_32_H */
-#ifndef _ASM_IO_H
-#define _ASM_IO_H
+#ifndef ASM_X86__IO_64_H
+#define ASM_X86__IO_64_H
/*
#define flush_write_buffers()
-extern int iommu_bio_merge;
#define BIO_VMERGE_BOUNDARY iommu_bio_merge
/*
#endif /* __KERNEL__ */
-#endif
+#endif /* ASM_X86__IO_64_H */
-#ifndef __ASM_IO_APIC_H
-#define __ASM_IO_APIC_H
+#ifndef ASM_X86__IO_APIC_H
+#define ASM_X86__IO_APIC_H
#include <linux/types.h>
#include <asm/mpspec.h>
static inline void ioapic_init_mappings(void) { }
#endif
-#endif
+#endif /* ASM_X86__IO_APIC_H */
-#ifndef _ASM_X86_IOCTLS_H
-#define _ASM_X86_IOCTLS_H
+#ifndef ASM_X86__IOCTLS_H
+#define ASM_X86__IOCTLS_H
#include <asm/ioctl.h>
#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-#endif
+#endif /* ASM_X86__IOCTLS_H */
-#ifndef _ASM_X8664_IOMMU_H
-#define _ASM_X8664_IOMMU_H 1
+#ifndef ASM_X86__IOMMU_H
+#define ASM_X86__IOMMU_H
extern void pci_iommu_shutdown(void);
extern void no_iommu_init(void);
}
#endif
-#endif
+#endif /* ASM_X86__IOMMU_H */
-#ifndef _ASM_X86_IPCBUF_H
-#define _ASM_X86_IPCBUF_H
+#ifndef ASM_X86__IPCBUF_H
+#define ASM_X86__IPCBUF_H
/*
* The ipc64_perm structure for x86 architecture.
unsigned long __unused2;
};
-#endif /* _ASM_X86_IPCBUF_H */
+#endif /* ASM_X86__IPCBUF_H */
-#ifndef __ASM_IPI_H
-#define __ASM_IPI_H
+#ifndef ASM_X86__IPI_H
+#define ASM_X86__IPI_H
/*
* Copyright 2004 James Cleverdon, IBM.
local_irq_restore(flags);
}
-#endif /* __ASM_IPI_H */
+#endif /* ASM_X86__IPI_H */
-#ifndef _ASM_IRQ_H
-#define _ASM_IRQ_H
+#ifndef ASM_X86__IRQ_H
+#define ASM_X86__IRQ_H
/*
* (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
*
/* Interrupt vector management */
extern DECLARE_BITMAP(used_vectors, NR_VECTORS);
-#endif /* _ASM_IRQ_H */
+#endif /* ASM_X86__IRQ_H */
*
* Jeremy Fitzhardinge <jeremy@goop.org>
*/
-#ifndef _ASM_I386_IRQ_REGS_H
-#define _ASM_I386_IRQ_REGS_H
+#ifndef ASM_X86__IRQ_REGS_32_H
+#define ASM_X86__IRQ_REGS_32_H
#include <asm/percpu.h>
return old_regs;
}
-#endif /* _ASM_I386_IRQ_REGS_H */
+#endif /* ASM_X86__IRQ_REGS_32_H */
-#ifndef _ASM_IRQ_VECTORS_H
-#define _ASM_IRQ_VECTORS_H
+#ifndef ASM_X86__IRQ_VECTORS_H
+#define ASM_X86__IRQ_VECTORS_H
#include <linux/threads.h>
#define VIC_CPU_BOOT_ERRATA_CPI (VIC_CPI_LEVEL0 + 8)
-#endif /* _ASM_IRQ_VECTORS_H */
+#endif /* ASM_X86__IRQ_VECTORS_H */
-#ifndef _ASM_IST_H
-#define _ASM_IST_H
+#ifndef ASM_X86__IST_H
+#define ASM_X86__IST_H
/*
* Include file for the interface to IST BIOS
extern struct ist_info ist_info;
#endif /* __KERNEL__ */
-#endif /* _ASM_IST_H */
+#endif /* ASM_X86__IST_H */
-#ifndef _ASM_K8_H
-#define _ASM_K8_H 1
+#ifndef ASM_X86__K8_H
+#define ASM_X86__K8_H
#include <linux/pci.h>
extern void k8_flush_garts(void);
extern int k8_scan_nodes(unsigned long start, unsigned long end);
-#endif
+#endif /* ASM_X86__K8_H */
-#ifndef _ASM_X86_KDEBUG_H
-#define _ASM_X86_KDEBUG_H
+#ifndef ASM_X86__KDEBUG_H
+#define ASM_X86__KDEBUG_H
#include <linux/notifier.h>
extern unsigned long oops_begin(void);
extern void oops_end(unsigned long, struct pt_regs *, int signr);
-#endif
+#endif /* ASM_X86__KDEBUG_H */
-#ifndef _KEXEC_H
-#define _KEXEC_H
+#ifndef ASM_X86__KEXEC_H
+#define ASM_X86__KEXEC_H
#ifdef CONFIG_X86_32
# define PA_CONTROL_PAGE 0
#endif /* __ASSEMBLY__ */
-#endif /* _KEXEC_H */
+#endif /* ASM_X86__KEXEC_H */
-#ifndef _ASM_KGDB_H_
-#define _ASM_KGDB_H_
+#ifndef ASM_X86__KGDB_H
+#define ASM_X86__KGDB_H
/*
* Copyright (C) 2001-2004 Amit S. Kale
GDB_FS, /* 14 */
GDB_GS, /* 15 */
};
+#define NUMREGBYTES ((GDB_GS+1)*4)
#else /* ! CONFIG_X86_32 */
-enum regnames {
+enum regnames64 {
GDB_AX, /* 0 */
- GDB_DX, /* 1 */
+ GDB_BX, /* 1 */
GDB_CX, /* 2 */
- GDB_BX, /* 3 */
+ GDB_DX, /* 3 */
GDB_SI, /* 4 */
GDB_DI, /* 5 */
GDB_BP, /* 6 */
GDB_R14, /* 14 */
GDB_R15, /* 15 */
GDB_PC, /* 16 */
- GDB_PS, /* 17 */
};
-#endif /* CONFIG_X86_32 */
-/*
- * Number of bytes of registers:
- */
-#ifdef CONFIG_X86_32
-# define NUMREGBYTES 64
-#else
-# define NUMREGBYTES ((GDB_PS+1)*8)
-#endif
+enum regnames32 {
+ GDB_PS = 34,
+ GDB_CS,
+ GDB_SS,
+};
+#define NUMREGBYTES ((GDB_SS+1)*4)
+#endif /* CONFIG_X86_32 */
static inline void arch_kgdb_breakpoint(void)
{
#define BREAK_INSTR_SIZE 1
#define CACHE_FLUSH_IS_SAFE 1
-#endif /* _ASM_KGDB_H_ */
+#endif /* ASM_X86__KGDB_H */
-#ifndef _ASM_X86_KMAP_TYPES_H
-#define _ASM_X86_KMAP_TYPES_H
+#ifndef ASM_X86__KMAP_TYPES_H
+#define ASM_X86__KMAP_TYPES_H
#if defined(CONFIG_X86_32) && defined(CONFIG_DEBUG_HIGHMEM)
# define D(n) __KM_FENCE_##n ,
#undef D
-#endif
+#endif /* ASM_X86__KMAP_TYPES_H */
-#ifndef _ASM_KPROBES_H
-#define _ASM_KPROBES_H
+#ifndef ASM_X86__KPROBES_H
+#define ASM_X86__KPROBES_H
/*
* Kernel Probes (KProbes)
*
extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
extern int kprobe_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data);
-#endif /* _ASM_KPROBES_H */
+#endif /* ASM_X86__KPROBES_H */
-#ifndef __LINUX_KVM_X86_H
-#define __LINUX_KVM_X86_H
+#ifndef ASM_X86__KVM_H
+#define ASM_X86__KVM_H
/*
* KVM x86 specific structures and definitions
#define KVM_TRC_APIC_ACCESS (KVM_TRC_HANDLER + 0x14)
#define KVM_TRC_TDP_FAULT (KVM_TRC_HANDLER + 0x15)
-#endif
+#endif /* ASM_X86__KVM_H */
-#/*
+/*
* Kernel-based Virtual Machine driver for Linux
*
* This header defines architecture specific interfaces, x86 version
*
*/
-#ifndef ASM_KVM_HOST_H
-#define ASM_KVM_HOST_H
+#ifndef ASM_X86__KVM_HOST_H
+#define ASM_X86__KVM_HOST_H
#include <linux/types.h>
#include <linux/mm.h>
int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
int kvm_age_hva(struct kvm *kvm, unsigned long hva);
-#endif
+#endif /* ASM_X86__KVM_HOST_H */
-#ifndef __X86_KVM_PARA_H
-#define __X86_KVM_PARA_H
+#ifndef ASM_X86__KVM_PARA_H
+#define ASM_X86__KVM_PARA_H
/* This CPUID returns the signature 'KVMKVMKVM' in ebx, ecx, and edx. It
* should be used to determine that a VM is running under KVM.
#endif
-#endif
+#endif /* ASM_X86__KVM_PARA_H */
* From: xen-unstable 10676:af9809f51f81a3c43f276f00c81a52ef558afda4
*/
-#ifndef __X86_EMULATE_H__
-#define __X86_EMULATE_H__
+#ifndef ASM_X86__KVM_X86_EMULATE_H
+#define ASM_X86__KVM_X86_EMULATE_H
struct x86_emulate_ctxt;
int x86_emulate_insn(struct x86_emulate_ctxt *ctxt,
struct x86_emulate_ops *ops);
-#endif /* __X86_EMULATE_H__ */
+#endif /* ASM_X86__KVM_X86_EMULATE_H */
*
* Definitions of structures used with the modify_ldt system call.
*/
-#ifndef _ASM_X86_LDT_H
-#define _ASM_X86_LDT_H
+#ifndef ASM_X86__LDT_H
+#define ASM_X86__LDT_H
/* Maximum number of LDT entries supported. */
#define LDT_ENTRIES 8192
#define MODIFY_LDT_CONTENTS_CODE 2
#endif /* !__ASSEMBLY__ */
-#endif
+#endif /* ASM_X86__LDT_H */
-#ifndef _X86_LGUEST_H
-#define _X86_LGUEST_H
+#ifndef ASM_X86__LGUEST_H
+#define ASM_X86__LGUEST_H
#define GDT_ENTRY_LGUEST_CS 10
#define GDT_ENTRY_LGUEST_DS 11
#endif /* __ASSEMBLY__ */
-#endif
+#endif /* ASM_X86__LGUEST_H */
/* Architecture specific portion of the lguest hypercalls */
-#ifndef _X86_LGUEST_HCALL_H
-#define _X86_LGUEST_HCALL_H
+#ifndef ASM_X86__LGUEST_HCALL_H
+#define ASM_X86__LGUEST_HCALL_H
#define LHCALL_FLUSH_ASYNC 0
#define LHCALL_LGUEST_INIT 1
};
#endif /* !__ASSEMBLY__ */
-#endif /* _I386_LGUEST_HCALL_H */
+#endif /* ASM_X86__LGUEST_HCALL_H */
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
+#ifndef ASM_X86__LINKAGE_H
+#define ASM_X86__LINKAGE_H
#undef notrace
#define notrace __attribute__((no_instrument_function))
#define __ALIGN_STR ".align 16,0x90"
#endif
-#endif
+#endif /* ASM_X86__LINKAGE_H */
-#ifndef _ARCH_LOCAL_H
-#define _ARCH_LOCAL_H
+#ifndef ASM_X86__LOCAL_H
+#define ASM_X86__LOCAL_H
#include <linux/percpu.h>
#define __cpu_local_add(i, l) cpu_local_add((i), (l))
#define __cpu_local_sub(i, l) cpu_local_sub((i), (l))
-#endif /* _ARCH_LOCAL_H */
+#endif /* ASM_X86__LOCAL_H */
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
+#ifndef ASM_X86__MACH_BIGSMP__MACH_APIC_H
+#define ASM_X86__MACH_BIGSMP__MACH_APIC_H
#define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu))
#define esr_disable (1)
return cpuid_apic >> index_msb;
}
-#endif /* __ASM_MACH_APIC_H */
+#endif /* ASM_X86__MACH_BIGSMP__MACH_APIC_H */
-#ifndef __ASM_MACH_APICDEF_H
-#define __ASM_MACH_APICDEF_H
+#ifndef ASM_X86__MACH_BIGSMP__MACH_APICDEF_H
+#define ASM_X86__MACH_BIGSMP__MACH_APICDEF_H
#define APIC_ID_MASK (0xFF<<24)
#define GET_APIC_ID(x) get_apic_id(x)
-#endif
+#endif /* ASM_X86__MACH_BIGSMP__MACH_APICDEF_H */
-#ifndef __ASM_MACH_IPI_H
-#define __ASM_MACH_IPI_H
+#ifndef ASM_X86__MACH_BIGSMP__MACH_IPI_H
+#define ASM_X86__MACH_BIGSMP__MACH_IPI_H
void send_IPI_mask_sequence(cpumask_t mask, int vector);
send_IPI_mask(cpu_online_map, vector);
}
-#endif /* __ASM_MACH_IPI_H */
+#endif /* ASM_X86__MACH_BIGSMP__MACH_IPI_H */
* Split out from apm.c by Osamu Tomita <tomita@cinet.co.jp>
*/
-#ifndef _ASM_APM_H
-#define _ASM_APM_H
+#ifndef ASM_X86__MACH_DEFAULT__APM_H
+#define ASM_X86__MACH_DEFAULT__APM_H
#ifdef APM_ZERO_SEGS
# define APM_DO_ZERO_SEGS \
return error;
}
-#endif /* _ASM_APM_H */
+#endif /* ASM_X86__MACH_DEFAULT__APM_H */
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
+#ifndef ASM_X86__MACH_DEFAULT__MACH_APIC_H
+#define ASM_X86__MACH_DEFAULT__MACH_APIC_H
#ifdef CONFIG_X86_LOCAL_APIC
}
#endif /* CONFIG_X86_LOCAL_APIC */
-#endif /* __ASM_MACH_APIC_H */
+#endif /* ASM_X86__MACH_DEFAULT__MACH_APIC_H */
-#ifndef __ASM_MACH_APICDEF_H
-#define __ASM_MACH_APICDEF_H
+#ifndef ASM_X86__MACH_DEFAULT__MACH_APICDEF_H
+#define ASM_X86__MACH_DEFAULT__MACH_APICDEF_H
#include <asm/apic.h>
#define GET_APIC_ID(x) get_apic_id(x)
#endif
-#endif
+#endif /* ASM_X86__MACH_DEFAULT__MACH_APICDEF_H */
-#ifndef __ASM_MACH_IPI_H
-#define __ASM_MACH_IPI_H
+#ifndef ASM_X86__MACH_DEFAULT__MACH_IPI_H
+#define ASM_X86__MACH_DEFAULT__MACH_IPI_H
/* Avoid include hell */
#define NMI_VECTOR 0x02
}
#endif
-#endif /* __ASM_MACH_IPI_H */
+#endif /* ASM_X86__MACH_DEFAULT__MACH_IPI_H */
-#ifndef __ASM_MACH_MPPARSE_H
-#define __ASM_MACH_MPPARSE_H
+#ifndef ASM_X86__MACH_DEFAULT__MACH_MPPARSE_H
+#define ASM_X86__MACH_DEFAULT__MACH_MPPARSE_H
static inline int mps_oem_check(struct mp_config_table *mpc, char *oem,
char *productid)
}
-#endif /* __ASM_MACH_MPPARSE_H */
+#endif /* ASM_X86__MACH_DEFAULT__MACH_MPPARSE_H */
-#ifndef __ASM_MACH_MPSPEC_H
-#define __ASM_MACH_MPSPEC_H
+#ifndef ASM_X86__MACH_DEFAULT__MACH_MPSPEC_H
+#define ASM_X86__MACH_DEFAULT__MACH_MPSPEC_H
#define MAX_IRQ_SOURCES 256
#define MAX_MP_BUSSES 32
#endif
-#endif /* __ASM_MACH_MPSPEC_H */
+#endif /* ASM_X86__MACH_DEFAULT__MACH_MPSPEC_H */
* directly because of the awkward 8-bit access mechanism of the 82C54
* device.
*/
-#ifndef _MACH_TIMER_H
-#define _MACH_TIMER_H
+#ifndef ASM_X86__MACH_DEFAULT__MACH_TIMER_H
+#define ASM_X86__MACH_DEFAULT__MACH_TIMER_H
#define CALIBRATE_TIME_MSEC 30 /* 30 msecs */
#define CALIBRATE_LATCH \
*count_p = count;
}
-#endif /* !_MACH_TIMER_H */
+#endif /* ASM_X86__MACH_DEFAULT__MACH_TIMER_H */
* Machine specific NMI handling for generic.
* Split out from traps.c by Osamu Tomita <tomita@cinet.co.jp>
*/
-#ifndef _MACH_TRAPS_H
-#define _MACH_TRAPS_H
+#ifndef ASM_X86__MACH_DEFAULT__MACH_TRAPS_H
+#define ASM_X86__MACH_DEFAULT__MACH_TRAPS_H
#include <asm/mc146818rtc.h>
unlock_cmos();
}
-#endif /* !_MACH_TRAPS_H */
+#endif /* ASM_X86__MACH_DEFAULT__MACH_TRAPS_H */
-#ifndef __ASM_MACH_WAKECPU_H
-#define __ASM_MACH_WAKECPU_H
+#ifndef ASM_X86__MACH_DEFAULT__MACH_WAKECPU_H
+#define ASM_X86__MACH_DEFAULT__MACH_WAKECPU_H
/*
* This file copes with machines that wakeup secondary CPUs by the
#define inquire_remote_apic(apicid) {}
#endif
-#endif /* __ASM_MACH_WAKECPU_H */
+#endif /* ASM_X86__MACH_DEFAULT__MACH_WAKECPU_H */
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
+#ifndef ASM_X86__MACH_ES7000__MACH_APIC_H
+#define ASM_X86__MACH_ES7000__MACH_APIC_H
#define xapic_phys_to_log_apicid(cpu) per_cpu(x86_bios_cpu_apicid, cpu)
#define esr_disable (1)
return cpuid_apic >> index_msb;
}
-#endif /* __ASM_MACH_APIC_H */
+#endif /* ASM_X86__MACH_ES7000__MACH_APIC_H */
-#ifndef __ASM_MACH_APICDEF_H
-#define __ASM_MACH_APICDEF_H
+#ifndef ASM_X86__MACH_ES7000__MACH_APICDEF_H
+#define ASM_X86__MACH_ES7000__MACH_APICDEF_H
#define APIC_ID_MASK (0xFF<<24)
#define GET_APIC_ID(x) get_apic_id(x)
-#endif
+#endif /* ASM_X86__MACH_ES7000__MACH_APICDEF_H */
-#ifndef __ASM_MACH_IPI_H
-#define __ASM_MACH_IPI_H
+#ifndef ASM_X86__MACH_ES7000__MACH_IPI_H
+#define ASM_X86__MACH_ES7000__MACH_IPI_H
void send_IPI_mask_sequence(cpumask_t mask, int vector);
send_IPI_mask(cpu_online_map, vector);
}
-#endif /* __ASM_MACH_IPI_H */
+#endif /* ASM_X86__MACH_ES7000__MACH_IPI_H */
-#ifndef __ASM_MACH_MPPARSE_H
-#define __ASM_MACH_MPPARSE_H
+#ifndef ASM_X86__MACH_ES7000__MACH_MPPARSE_H
+#define ASM_X86__MACH_ES7000__MACH_MPPARSE_H
#include <linux/acpi.h>
}
#endif
-#endif /* __ASM_MACH_MPPARSE_H */
+#endif /* ASM_X86__MACH_ES7000__MACH_MPPARSE_H */
-#ifndef __ASM_MACH_WAKECPU_H
-#define __ASM_MACH_WAKECPU_H
+#ifndef ASM_X86__MACH_ES7000__MACH_WAKECPU_H
+#define ASM_X86__MACH_ES7000__MACH_WAKECPU_H
/*
* This file copes with machines that wakeup secondary CPUs by the
#define inquire_remote_apic(apicid) {}
#endif
-#endif /* __ASM_MACH_WAKECPU_H */
+#endif /* ASM_X86__MACH_ES7000__MACH_WAKECPU_H */
-#ifndef __ASM_MACH_GENERIC_GPIO_H
-#define __ASM_MACH_GENERIC_GPIO_H
+#ifndef ASM_X86__MACH_GENERIC__GPIO_H
+#define ASM_X86__MACH_GENERIC__GPIO_H
int gpio_request(unsigned gpio, const char *label);
void gpio_free(unsigned gpio);
#include <asm-generic/gpio.h> /* cansleep wrappers */
-#endif /* __ASM_MACH_GENERIC_GPIO_H */
+#endif /* ASM_X86__MACH_GENERIC__GPIO_H */
-#ifndef _ASM_IRQ_VECTORS_LIMITS_H
-#define _ASM_IRQ_VECTORS_LIMITS_H
+#ifndef ASM_X86__MACH_GENERIC__IRQ_VECTORS_LIMITS_H
+#define ASM_X86__MACH_GENERIC__IRQ_VECTORS_LIMITS_H
/*
* For Summit or generic (i.e. installer) kernels, we have lots of I/O APICs,
#define NR_IRQS 224
#define NR_IRQ_VECTORS 1024
-#endif /* _ASM_IRQ_VECTORS_LIMITS_H */
+#endif /* ASM_X86__MACH_GENERIC__IRQ_VECTORS_LIMITS_H */
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
+#ifndef ASM_X86__MACH_GENERIC__MACH_APIC_H
+#define ASM_X86__MACH_GENERIC__MACH_APIC_H
#include <asm/genapic.h>
extern void generic_bigsmp_probe(void);
-#endif /* __ASM_MACH_APIC_H */
+#endif /* ASM_X86__MACH_GENERIC__MACH_APIC_H */
-#ifndef _GENAPIC_MACH_APICDEF_H
-#define _GENAPIC_MACH_APICDEF_H 1
+#ifndef ASM_X86__MACH_GENERIC__MACH_APICDEF_H
+#define ASM_X86__MACH_GENERIC__MACH_APICDEF_H
#ifndef APIC_DEFINITION
#include <asm/genapic.h>
#define APIC_ID_MASK (genapic->apic_id_mask)
#endif
-#endif
+#endif /* ASM_X86__MACH_GENERIC__MACH_APICDEF_H */
-#ifndef _MACH_IPI_H
-#define _MACH_IPI_H 1
+#ifndef ASM_X86__MACH_GENERIC__MACH_IPI_H
+#define ASM_X86__MACH_GENERIC__MACH_IPI_H
#include <asm/genapic.h>
#define send_IPI_allbutself (genapic->send_IPI_allbutself)
#define send_IPI_all (genapic->send_IPI_all)
-#endif
+#endif /* ASM_X86__MACH_GENERIC__MACH_IPI_H */
-#ifndef _MACH_MPPARSE_H
-#define _MACH_MPPARSE_H 1
+#ifndef ASM_X86__MACH_GENERIC__MACH_MPPARSE_H
+#define ASM_X86__MACH_GENERIC__MACH_MPPARSE_H
extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
-#endif
+#endif /* ASM_X86__MACH_GENERIC__MACH_MPPARSE_H */
-#ifndef __ASM_MACH_MPSPEC_H
-#define __ASM_MACH_MPSPEC_H
+#ifndef ASM_X86__MACH_GENERIC__MACH_MPSPEC_H
+#define ASM_X86__MACH_GENERIC__MACH_MPSPEC_H
#define MAX_IRQ_SOURCES 256
extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
char *productid);
-#endif /* __ASM_MACH_MPSPEC_H */
+#endif /* ASM_X86__MACH_GENERIC__MACH_MPSPEC_H */
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
+#ifndef ASM_X86__MACH_NUMAQ__MACH_APIC_H
+#define ASM_X86__MACH_NUMAQ__MACH_APIC_H
#include <asm/io.h>
#include <linux/mmzone.h>
return cpuid_apic >> index_msb;
}
-#endif /* __ASM_MACH_APIC_H */
+#endif /* ASM_X86__MACH_NUMAQ__MACH_APIC_H */
-#ifndef __ASM_MACH_APICDEF_H
-#define __ASM_MACH_APICDEF_H
+#ifndef ASM_X86__MACH_NUMAQ__MACH_APICDEF_H
+#define ASM_X86__MACH_NUMAQ__MACH_APICDEF_H
#define APIC_ID_MASK (0xF<<24)
#define GET_APIC_ID(x) get_apic_id(x)
-#endif
+#endif /* ASM_X86__MACH_NUMAQ__MACH_APICDEF_H */
-#ifndef __ASM_MACH_IPI_H
-#define __ASM_MACH_IPI_H
+#ifndef ASM_X86__MACH_NUMAQ__MACH_IPI_H
+#define ASM_X86__MACH_NUMAQ__MACH_IPI_H
void send_IPI_mask_sequence(cpumask_t, int vector);
send_IPI_mask(cpu_online_map, vector);
}
-#endif /* __ASM_MACH_IPI_H */
+#endif /* ASM_X86__MACH_NUMAQ__MACH_IPI_H */
-#ifndef __ASM_MACH_MPPARSE_H
-#define __ASM_MACH_MPPARSE_H
+#ifndef ASM_X86__MACH_NUMAQ__MACH_MPPARSE_H
+#define ASM_X86__MACH_NUMAQ__MACH_MPPARSE_H
extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
char *productid);
-#endif /* __ASM_MACH_MPPARSE_H */
+#endif /* ASM_X86__MACH_NUMAQ__MACH_MPPARSE_H */
-#ifndef __ASM_MACH_WAKECPU_H
-#define __ASM_MACH_WAKECPU_H
+#ifndef ASM_X86__MACH_NUMAQ__MACH_WAKECPU_H
+#define ASM_X86__MACH_NUMAQ__MACH_WAKECPU_H
/* This file copes with machines that wakeup secondary CPUs by NMIs */
#define inquire_remote_apic(apicid) {}
-#endif /* __ASM_MACH_WAKECPU_H */
+#endif /* ASM_X86__MACH_NUMAQ__MACH_WAKECPU_H */
-#ifndef _RDC321X_GPIO_H
-#define _RDC321X_GPIO_H
+#ifndef ASM_X86__MACH_RDC321X__GPIO_H
+#define ASM_X86__MACH_RDC321X__GPIO_H
+
+#include <linux/kernel.h>
extern int rdc_gpio_get_value(unsigned gpio);
extern void rdc_gpio_set_value(unsigned gpio, int value);
static inline void gpio_free(unsigned gpio)
{
+ might_sleep();
rdc_gpio_free(gpio);
}
/* For cansleep */
#include <asm-generic/gpio.h>
-#endif /* _RDC321X_GPIO_H_ */
+#endif /* ASM_X86__MACH_RDC321X__GPIO_H */
-#ifndef _ASM_IRQ_VECTORS_LIMITS_H
-#define _ASM_IRQ_VECTORS_LIMITS_H
+#ifndef ASM_X86__MACH_SUMMIT__IRQ_VECTORS_LIMITS_H
+#define ASM_X86__MACH_SUMMIT__IRQ_VECTORS_LIMITS_H
/*
* For Summit or generic (i.e. installer) kernels, we have lots of I/O APICs,
#define NR_IRQS 224
#define NR_IRQ_VECTORS 1024
-#endif /* _ASM_IRQ_VECTORS_LIMITS_H */
+#endif /* ASM_X86__MACH_SUMMIT__IRQ_VECTORS_LIMITS_H */
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
+#ifndef ASM_X86__MACH_SUMMIT__MACH_APIC_H
+#define ASM_X86__MACH_SUMMIT__MACH_APIC_H
#include <asm/smp.h>
return hard_smp_processor_id() >> index_msb;
}
-#endif /* __ASM_MACH_APIC_H */
+#endif /* ASM_X86__MACH_SUMMIT__MACH_APIC_H */
-#ifndef __ASM_MACH_APICDEF_H
-#define __ASM_MACH_APICDEF_H
+#ifndef ASM_X86__MACH_SUMMIT__MACH_APICDEF_H
+#define ASM_X86__MACH_SUMMIT__MACH_APICDEF_H
#define APIC_ID_MASK (0xFF<<24)
#define GET_APIC_ID(x) get_apic_id(x)
-#endif
+#endif /* ASM_X86__MACH_SUMMIT__MACH_APICDEF_H */
-#ifndef __ASM_MACH_IPI_H
-#define __ASM_MACH_IPI_H
+#ifndef ASM_X86__MACH_SUMMIT__MACH_IPI_H
+#define ASM_X86__MACH_SUMMIT__MACH_IPI_H
void send_IPI_mask_sequence(cpumask_t mask, int vector);
send_IPI_mask(cpu_online_map, vector);
}
-#endif /* __ASM_MACH_IPI_H */
+#endif /* ASM_X86__MACH_SUMMIT__MACH_IPI_H */
-#ifndef __ASM_MACH_MPPARSE_H
-#define __ASM_MACH_MPPARSE_H
+#ifndef ASM_X86__MACH_SUMMIT__MACH_MPPARSE_H
+#define ASM_X86__MACH_SUMMIT__MACH_MPPARSE_H
#include <mach_apic.h>
#include <asm/tsc.h>
rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
}
-#endif /* __ASM_MACH_MPPARSE_H */
+#endif /* ASM_X86__MACH_SUMMIT__MACH_MPPARSE_H */
-#ifndef _I386_MATH_EMU_H
-#define _I386_MATH_EMU_H
+#ifndef ASM_X86__MATH_EMU_H
+#define ASM_X86__MATH_EMU_H
/* This structure matches the layout of the data saved to the stack
following a device-not-present interrupt, part of it saved
long ___vm86_fs;
long ___vm86_gs;
};
-#endif
+#endif /* ASM_X86__MATH_EMU_H */
/*
* Machine dependent access functions for RTC registers.
*/
-#ifndef _ASM_MC146818RTC_H
-#define _ASM_MC146818RTC_H
+#ifndef ASM_X86__MC146818RTC_H
+#define ASM_X86__MC146818RTC_H
#include <asm/io.h>
#include <asm/system.h>
#define RTC_IRQ 8
-#endif /* _ASM_MC146818RTC_H */
+#endif /* ASM_X86__MC146818RTC_H */
/* -*- mode: c; c-basic-offset: 8 -*- */
/* Platform specific MCA defines */
-#ifndef _ASM_MCA_H
-#define _ASM_MCA_H
+#ifndef ASM_X86__MCA_H
+#define ASM_X86__MCA_H
/* Maximal number of MCA slots - actually, some machines have less, but
* they all have sufficient number of POS registers to cover 8.
*/
#define MCA_NUMADAPTERS (MCA_MAX_SLOT_NR+3)
-#endif
+#endif /* ASM_X86__MCA_H */
-#ifndef MCA_DMA_H
-#define MCA_DMA_H
+#ifndef ASM_X86__MCA_DMA_H
+#define ASM_X86__MCA_DMA_H
#include <asm/io.h>
#include <linux/ioport.h>
outb(mode, MCA_DMA_REG_EXE);
}
-#endif /* MCA_DMA_H */
+#endif /* ASM_X86__MCA_DMA_H */
-#ifndef _ASM_X86_MCE_H
-#define _ASM_X86_MCE_H
+#ifndef ASM_X86__MCE_H
+#define ASM_X86__MCE_H
#ifdef __x86_64__
#endif /* __KERNEL__ */
-#endif
+#endif /* ASM_X86__MCE_H */
-#ifndef _ASM_X86_MMAN_H
-#define _ASM_X86_MMAN_H
+#ifndef ASM_X86__MMAN_H
+#define ASM_X86__MMAN_H
#include <asm-generic/mman.h>
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
-#endif /* _ASM_X86_MMAN_H */
+#endif /* ASM_X86__MMAN_H */
-#ifndef _ASM_MMCONFIG_H
-#define _ASM_MMCONFIG_H
+#ifndef ASM_X86__MMCONFIG_H
+#define ASM_X86__MMCONFIG_H
#ifdef CONFIG_PCI_MMCONFIG
extern void __cpuinit fam10h_check_enable_mmcfg(void);
static inline void check_enable_amd_mmconf_dmi(void) { }
#endif
-#endif
+#endif /* ASM_X86__MMCONFIG_H */
-#ifndef _ASM_X86_MMU_H
-#define _ASM_X86_MMU_H
+#ifndef ASM_X86__MMU_H
+#define ASM_X86__MMU_H
#include <linux/spinlock.h>
#include <linux/mutex.h>
/*
* The x86 doesn't have a mmu context, but
* we put the segment information here.
- *
- * cpu_vm_mask is used to optimize ldt flushing.
*/
typedef struct {
void *ldt;
-#ifdef CONFIG_X86_64
- rwlock_t ldtlock;
-#endif
int size;
struct mutex lock;
void *vdso;
}
#endif
-#endif /* _ASM_X86_MMU_H */
+#endif /* ASM_X86__MMU_H */
-#ifndef __ASM_X86_MMU_CONTEXT_H
-#define __ASM_X86_MMU_CONTEXT_H
+#ifndef ASM_X86__MMU_CONTEXT_H
+#define ASM_X86__MMU_CONTEXT_H
#include <asm/desc.h>
#include <asm/atomic.h>
} while (0);
-#endif /* __ASM_X86_MMU_CONTEXT_H */
+#endif /* ASM_X86__MMU_CONTEXT_H */
-#ifndef __I386_SCHED_H
-#define __I386_SCHED_H
+#ifndef ASM_X86__MMU_CONTEXT_32_H
+#define ASM_X86__MMU_CONTEXT_32_H
static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
{
#define deactivate_mm(tsk, mm) \
asm("movl %0,%%gs": :"r" (0));
-#endif
+#endif /* ASM_X86__MMU_CONTEXT_32_H */
-#ifndef __X86_64_MMU_CONTEXT_H
-#define __X86_64_MMU_CONTEXT_H
+#ifndef ASM_X86__MMU_CONTEXT_64_H
+#define ASM_X86__MMU_CONTEXT_64_H
#include <asm/pda.h>
asm volatile("movl %0,%%fs"::"r"(0)); \
} while (0)
-#endif
+#endif /* ASM_X86__MMU_CONTEXT_64_H */
-#ifndef _ASM_MMX_H
-#define _ASM_MMX_H
+#ifndef ASM_X86__MMX_H
+#define ASM_X86__MMX_H
/*
* MMX 3Dnow! helper operations
extern void mmx_clear_page(void *page);
extern void mmx_copy_page(void *to, void *from);
-#endif
+#endif /* ASM_X86__MMX_H */
*
*/
-#ifndef _ASM_MMZONE_H_
-#define _ASM_MMZONE_H_
+#ifndef ASM_X86__MMZONE_32_H
+#define ASM_X86__MMZONE_32_H
#include <asm/smp.h>
})
#endif /* CONFIG_NEED_MULTIPLE_NODES */
-#endif /* _ASM_MMZONE_H_ */
+#endif /* ASM_X86__MMZONE_32_H */
/* K8 NUMA support */
/* Copyright 2002,2003 by Andi Kleen, SuSE Labs */
/* 2.5 Version loosely based on the NUMAQ Code by Pat Gaughen. */
-#ifndef _ASM_X86_64_MMZONE_H
-#define _ASM_X86_64_MMZONE_H 1
+#ifndef ASM_X86__MMZONE_64_H
+#define ASM_X86__MMZONE_64_H
#ifdef CONFIG_NUMA
#endif
#endif
-#endif
+#endif /* ASM_X86__MMZONE_64_H */
-#ifndef _ASM_MODULE_H
-#define _ASM_MODULE_H
+#ifndef ASM_X86__MODULE_H
+#define ASM_X86__MODULE_H
/* x86_32/64 are simple */
struct mod_arch_specific {};
# define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY MODULE_STACKSIZE
#endif
-#endif /* _ASM_MODULE_H */
+#endif /* ASM_X86__MODULE_H */
-#ifndef _AM_X86_MPSPEC_H
-#define _AM_X86_MPSPEC_H
+#ifndef ASM_X86__MPSPEC_H
+#define ASM_X86__MPSPEC_H
#include <linux/init.h>
extern physid_mask_t phys_cpu_present_map;
-#endif
+#endif /* ASM_X86__MPSPEC_H */
-#ifndef __ASM_MPSPEC_DEF_H
-#define __ASM_MPSPEC_DEF_H
+#ifndef ASM_X86__MPSPEC_DEF_H
+#define ASM_X86__MPSPEC_DEF_H
/*
* Structure definitions for SMP machines following the
MP_BUS_PCI,
MP_BUS_MCA,
};
-#endif
+#endif /* ASM_X86__MPSPEC_DEF_H */
-#ifndef _ASM_X86_MSGBUF_H
-#define _ASM_X86_MSGBUF_H
+#ifndef ASM_X86__MSGBUF_H
+#define ASM_X86__MSGBUF_H
/*
* The msqid64_ds structure for i386 architecture.
unsigned long __unused5;
};
-#endif /* _ASM_X86_MSGBUF_H */
+#endif /* ASM_X86__MSGBUF_H */
-#ifndef ASM_MSIDEF_H
-#define ASM_MSIDEF_H
+#ifndef ASM_X86__MSIDEF_H
+#define ASM_X86__MSIDEF_H
/*
* Constants for Intel APIC based MSI messages.
#define MSI_ADDR_DEST_ID(dest) (((dest) << MSI_ADDR_DEST_ID_SHIFT) & \
MSI_ADDR_DEST_ID_MASK)
-#endif /* ASM_MSIDEF_H */
+#endif /* ASM_X86__MSIDEF_H */
-#ifndef __ASM_MSR_INDEX_H
-#define __ASM_MSR_INDEX_H
+#ifndef ASM_X86__MSR_INDEX_H
+#define ASM_X86__MSR_INDEX_H
/* CPU model specific register (MSR) numbers */
/* Geode defined MSRs */
#define MSR_GEODE_BUSCONT_CONF0 0x00001900
-#endif /* __ASM_MSR_INDEX_H */
+#endif /* ASM_X86__MSR_INDEX_H */
-#ifndef __ASM_X86_MSR_H_
-#define __ASM_X86_MSR_H_
+#ifndef ASM_X86__MSR_H
+#define ASM_X86__MSR_H
#include <asm/msr-index.h>
{
DECLARE_ARGS(val, low, high);
+ asm volatile("2: rdmsr ; xor %[err],%[err]\n"
+ "1:\n\t"
+ ".section .fixup,\"ax\"\n\t"
+ "3: mov %[fault],%[err] ; jmp 1b\n\t"
+ ".previous\n\t"
+ _ASM_EXTABLE(2b, 3b)
+ : [err] "=r" (*err), EAX_EDX_RET(val, low, high)
+ : "c" (msr), [fault] "i" (-EFAULT));
+ return EAX_EDX_VAL(val, low, high);
+}
+
+static inline unsigned long long native_read_msr_amd_safe(unsigned int msr,
+ int *err)
+{
+ DECLARE_ARGS(val, low, high);
+
asm volatile("2: rdmsr ; xor %0,%0\n"
"1:\n\t"
".section .fixup,\"ax\"\n\t"
".previous\n\t"
_ASM_EXTABLE(2b, 3b)
: "=r" (*err), EAX_EDX_RET(val, low, high)
- : "c" (msr), "i" (-EFAULT));
+ : "c" (msr), "D" (0x9c5a203a), "i" (-EFAULT));
return EAX_EDX_VAL(val, low, high);
}
unsigned low, unsigned high)
{
int err;
- asm volatile("2: wrmsr ; xor %0,%0\n"
+ asm volatile("2: wrmsr ; xor %[err],%[err]\n"
"1:\n\t"
".section .fixup,\"ax\"\n\t"
- "3: mov %4,%0 ; jmp 1b\n\t"
+ "3: mov %[fault],%[err] ; jmp 1b\n\t"
".previous\n\t"
_ASM_EXTABLE(2b, 3b)
- : "=a" (err)
+ : [err] "=a" (err)
: "c" (msr), "0" (low), "d" (high),
- "i" (-EFAULT)
+ [fault] "i" (-EFAULT)
: "memory");
return err;
}
*p = native_read_msr_safe(msr, &err);
return err;
}
+static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
+{
+ int err;
+
+ *p = native_read_msr_amd_safe(msr, &err);
+ return err;
+}
#define rdtscl(low) \
((low) = (u32)native_read_tsc())
#define write_rdtscp_aux(val) wrmsr(0xc0000103, (val), 0)
#ifdef CONFIG_SMP
-void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
-void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
+int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
+int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
-
int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
#else /* CONFIG_SMP */
-static inline void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+static inline int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
{
rdmsr(msr_no, *l, *h);
+ return 0;
}
-static inline void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+static inline int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
{
wrmsr(msr_no, l, h);
+ return 0;
}
static inline int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no,
u32 *l, u32 *h)
#endif /* __KERNEL__ */
-#endif
+#endif /* ASM_X86__MSR_H */
The postal address is:
Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia.
*/
-#ifndef _ASM_X86_MTRR_H
-#define _ASM_X86_MTRR_H
+#ifndef ASM_X86__MTRR_H
+#define ASM_X86__MTRR_H
#include <linux/ioctl.h>
#include <linux/errno.h>
#endif /* __KERNEL__ */
-#endif /* _ASM_X86_MTRR_H */
+#endif /* ASM_X86__MTRR_H */
*
* Copyright (C) 2004, 2005, 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
*/
-#ifndef _ASM_MUTEX_H
-#define _ASM_MUTEX_H
+#ifndef ASM_X86__MUTEX_32_H
+#define ASM_X86__MUTEX_32_H
#include <asm/alternative.h>
#endif
}
-#endif
+#endif /* ASM_X86__MUTEX_32_H */
*
* Copyright (C) 2004, 2005, 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
*/
-#ifndef _ASM_MUTEX_H
-#define _ASM_MUTEX_H
+#ifndef ASM_X86__MUTEX_64_H
+#define ASM_X86__MUTEX_64_H
/**
* __mutex_fastpath_lock - decrement and call function if negative
return 0;
}
-#endif
+#endif /* ASM_X86__MUTEX_64_H */
-#ifndef _ASM_X86_NMI_H_
-#define _ASM_X86_NMI_H_
+#ifndef ASM_X86__NMI_H
+#define ASM_X86__NMI_H
#include <linux/pm.h>
#include <asm/irq.h>
extern void disable_timer_nmi_watchdog(void);
extern void enable_timer_nmi_watchdog(void);
extern int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason);
+extern void cpu_nmi_set_wd_enabled(void);
extern atomic_t nmi_active;
extern unsigned int nmi_watchdog;
void stop_nmi(void);
void restart_nmi(void);
-#endif
+#endif /* ASM_X86__NMI_H */
-#ifndef _ASM_NOPS_H
-#define _ASM_NOPS_H 1
+#ifndef ASM_X86__NOPS_H
+#define ASM_X86__NOPS_H
/* Define nops for use with alternative() */
#define ASM_NOP_MAX 8
-#endif
+#endif /* ASM_X86__NOPS_H */
-#ifndef _ASM_X86_32_NUMA_H
-#define _ASM_X86_32_NUMA_H 1
+#ifndef ASM_X86__NUMA_32_H
+#define ASM_X86__NUMA_32_H
extern int pxm_to_nid(int pxm);
extern void numa_remove_cpu(int cpu);
extern void set_highmem_pages_init(void);
#endif
-#endif /* _ASM_X86_32_NUMA_H */
+#endif /* ASM_X86__NUMA_32_H */
-#ifndef _ASM_X8664_NUMA_H
-#define _ASM_X8664_NUMA_H 1
+#ifndef ASM_X86__NUMA_64_H
+#define ASM_X86__NUMA_64_H
#include <linux/nodemask.h>
#include <asm/apicdef.h>
static inline void numa_remove_cpu(int cpu) { }
#endif
-#endif
+#endif /* ASM_X86__NUMA_64_H */
* Send feedback to <gone@us.ibm.com>
*/
-#ifndef NUMAQ_H
-#define NUMAQ_H
+#ifndef ASM_X86__NUMAQ_H
+#define ASM_X86__NUMAQ_H
#ifdef CONFIG_X86_NUMAQ
return 0;
}
#endif /* CONFIG_X86_NUMAQ */
-#endif /* NUMAQ_H */
+#endif /* ASM_X86__NUMAQ_H */
/* OLPC machine specific definitions */
-#ifndef ASM_OLPC_H_
-#define ASM_OLPC_H_
+#ifndef ASM_X86__OLPC_H
+#define ASM_X86__OLPC_H
#include <asm/geode.h>
#define OLPC_GPIO_LID geode_gpio(26)
#define OLPC_GPIO_ECSCI geode_gpio(27)
-#endif
+#endif /* ASM_X86__OLPC_H */
-#ifndef _ASM_X86_PAGE_H
-#define _ASM_X86_PAGE_H
+#ifndef ASM_X86__PAGE_H
+#define ASM_X86__PAGE_H
#include <linux/const.h>
#define __HAVE_ARCH_GATE_AREA 1
#endif /* __KERNEL__ */
-#endif /* _ASM_X86_PAGE_H */
+#endif /* ASM_X86__PAGE_H */
-#ifndef _ASM_X86_PAGE_32_H
-#define _ASM_X86_PAGE_32_H
+#ifndef ASM_X86__PAGE_32_H
+#define ASM_X86__PAGE_32_H
/*
* This handles the memory map.
extern unsigned int __VMALLOC_RESERVE;
extern int sysctl_legacy_va_layout;
-#define VMALLOC_RESERVE ((unsigned long)__VMALLOC_RESERVE)
-#define MAXMEM (-__PAGE_OFFSET - __VMALLOC_RESERVE)
-
extern void find_low_pfn_range(void);
extern unsigned long init_memory_mapping(unsigned long start,
unsigned long end);
extern void initmem_init(unsigned long, unsigned long);
+extern void free_initmem(void);
extern void setup_bootmem_allocator(void);
#endif /* CONFIG_X86_3DNOW */
#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_X86_PAGE_32_H */
+#endif /* ASM_X86__PAGE_32_H */
-#ifndef _X86_64_PAGE_H
-#define _X86_64_PAGE_H
+#ifndef ASM_X86__PAGE_64_H
+#define ASM_X86__PAGE_64_H
#define PAGETABLE_LEVELS 4
unsigned long end);
extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
+extern void free_initmem(void);
extern void init_extra_mapping_uc(unsigned long phys, unsigned long size);
extern void init_extra_mapping_wb(unsigned long phys, unsigned long size);
#endif
-#endif /* _X86_64_PAGE_H */
+#endif /* ASM_X86__PAGE_64_H */
-#ifndef _ASM_X86_PARAM_H
-#define _ASM_X86_PARAM_H
+#ifndef ASM_X86__PARAM_H
+#define ASM_X86__PARAM_H
#ifdef __KERNEL__
# define HZ CONFIG_HZ /* Internal kernel timer frequency */
#define MAXHOSTNAMELEN 64 /* max length of hostname */
-#endif /* _ASM_X86_PARAM_H */
+#endif /* ASM_X86__PARAM_H */
-#ifndef __ASM_PARAVIRT_H
-#define __ASM_PARAVIRT_H
+#ifndef ASM_X86__PARAVIRT_H
+#define ASM_X86__PARAVIRT_H
/* Various instructions on x86 need to be replaced for
* para-virtualization: those hooks are defined here. */
/* MSR, PMC and TSR operations.
err = 0/-EFAULT. wrmsr returns 0/-EFAULT. */
+ u64 (*read_msr_amd)(unsigned int msr, int *err);
u64 (*read_msr)(unsigned int msr, int *err);
int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
* Hooks for allocating/releasing pagetable pages when they're
* attached to a pagetable
*/
- void (*alloc_pte)(struct mm_struct *mm, u32 pfn);
- void (*alloc_pmd)(struct mm_struct *mm, u32 pfn);
- void (*alloc_pmd_clone)(u32 pfn, u32 clonepfn, u32 start, u32 count);
- void (*alloc_pud)(struct mm_struct *mm, u32 pfn);
- void (*release_pte)(u32 pfn);
- void (*release_pmd)(u32 pfn);
- void (*release_pud)(u32 pfn);
+ void (*alloc_pte)(struct mm_struct *mm, unsigned long pfn);
+ void (*alloc_pmd)(struct mm_struct *mm, unsigned long pfn);
+ void (*alloc_pmd_clone)(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count);
+ void (*alloc_pud)(struct mm_struct *mm, unsigned long pfn);
+ void (*release_pte)(unsigned long pfn);
+ void (*release_pmd)(unsigned long pfn);
+ void (*release_pud)(unsigned long pfn);
/* Pagetable manipulation functions */
void (*set_pte)(pte_t *ptep, pte_t pteval);
{
return PVOP_CALL2(u64, pv_cpu_ops.read_msr, msr, err);
}
+static inline u64 paravirt_read_msr_amd(unsigned msr, int *err)
+{
+ return PVOP_CALL2(u64, pv_cpu_ops.read_msr_amd, msr, err);
+}
static inline int paravirt_write_msr(unsigned msr, unsigned low, unsigned high)
{
return PVOP_CALL3(int, pv_cpu_ops.write_msr, msr, low, high);
*p = paravirt_read_msr(msr, &err);
return err;
}
+static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
+{
+ int err;
+
+ *p = paravirt_read_msr_amd(msr, &err);
+ return err;
+}
static inline u64 paravirt_read_tsc(void)
{
PVOP_VCALL2(pv_mmu_ops.pgd_free, mm, pgd);
}
-static inline void paravirt_alloc_pte(struct mm_struct *mm, unsigned pfn)
+static inline void paravirt_alloc_pte(struct mm_struct *mm, unsigned long pfn)
{
PVOP_VCALL2(pv_mmu_ops.alloc_pte, mm, pfn);
}
-static inline void paravirt_release_pte(unsigned pfn)
+static inline void paravirt_release_pte(unsigned long pfn)
{
PVOP_VCALL1(pv_mmu_ops.release_pte, pfn);
}
-static inline void paravirt_alloc_pmd(struct mm_struct *mm, unsigned pfn)
+static inline void paravirt_alloc_pmd(struct mm_struct *mm, unsigned long pfn)
{
PVOP_VCALL2(pv_mmu_ops.alloc_pmd, mm, pfn);
}
-static inline void paravirt_alloc_pmd_clone(unsigned pfn, unsigned clonepfn,
- unsigned start, unsigned count)
+static inline void paravirt_alloc_pmd_clone(unsigned long pfn, unsigned long clonepfn,
+ unsigned long start, unsigned long count)
{
PVOP_VCALL4(pv_mmu_ops.alloc_pmd_clone, pfn, clonepfn, start, count);
}
-static inline void paravirt_release_pmd(unsigned pfn)
+static inline void paravirt_release_pmd(unsigned long pfn)
{
PVOP_VCALL1(pv_mmu_ops.release_pmd, pfn);
}
-static inline void paravirt_alloc_pud(struct mm_struct *mm, unsigned pfn)
+static inline void paravirt_alloc_pud(struct mm_struct *mm, unsigned long pfn)
{
PVOP_VCALL2(pv_mmu_ops.alloc_pud, mm, pfn);
}
-static inline void paravirt_release_pud(unsigned pfn)
+static inline void paravirt_release_pud(unsigned long pfn)
{
PVOP_VCALL1(pv_mmu_ops.release_pud, pfn);
}
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_PARAVIRT */
-#endif /* __ASM_PARAVIRT_H */
+#endif /* ASM_X86__PARAVIRT_H */
-#ifndef _ASM_X86_PARPORT_H
-#define _ASM_X86_PARPORT_H
+#ifndef ASM_X86__PARPORT_H
+#define ASM_X86__PARPORT_H
static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma);
static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma)
return parport_pc_find_isa_ports(autoirq, autodma);
}
-#endif /* _ASM_X86_PARPORT_H */
+#endif /* ASM_X86__PARPORT_H */
-#ifndef _ASM_PAT_H
-#define _ASM_PAT_H
+#ifndef ASM_X86__PAT_H
+#define ASM_X86__PAT_H
#include <linux/types.h>
extern void pat_disable(char *reason);
-#endif
+#endif /* ASM_X86__PAT_H */
-#ifndef ASM_PCI_DIRECT_H
-#define ASM_PCI_DIRECT_H 1
+#ifndef ASM_X86__PCI_DIRECT_H
+#define ASM_X86__PCI_DIRECT_H
#include <linux/types.h>
extern unsigned int pci_early_dump_regs;
extern void early_dump_pci_device(u8 bus, u8 slot, u8 func);
extern void early_dump_pci_devices(void);
-#endif
+#endif /* ASM_X86__PCI_DIRECT_H */
-#ifndef __x86_PCI_H
-#define __x86_PCI_H
+#ifndef ASM_X86__PCI_H
+#define ASM_X86__PCI_H
#include <linux/mm.h> /* for struct page */
#include <linux/types.h>
}
#endif
-#endif
+#endif /* ASM_X86__PCI_H */
-#ifndef __i386_PCI_H
-#define __i386_PCI_H
+#ifndef ASM_X86__PCI_32_H
+#define ASM_X86__PCI_32_H
#ifdef __KERNEL__
#endif /* __KERNEL__ */
-#endif /* __i386_PCI_H */
+#endif /* ASM_X86__PCI_32_H */
-#ifndef __x8664_PCI_H
-#define __x8664_PCI_H
+#ifndef ASM_X86__PCI_64_H
+#define ASM_X86__PCI_64_H
#ifdef __KERNEL__
#endif /* __KERNEL__ */
-#endif /* __x8664_PCI_H */
+#endif /* ASM_X86__PCI_64_H */
-#ifndef X86_64_PDA_H
-#define X86_64_PDA_H
+#ifndef ASM_X86__PDA_H
+#define ASM_X86__PDA_H
#ifndef __ASSEMBLY__
#include <linux/stddef.h>
#define PDA_STACKOFFSET (5*8)
-#endif
+#endif /* ASM_X86__PDA_H */
-#ifndef _ASM_X86_PERCPU_H_
-#define _ASM_X86_PERCPU_H_
+#ifndef ASM_X86__PERCPU_H
+#define ASM_X86__PERCPU_H
#ifdef CONFIG_X86_64
#include <linux/compiler.h>
#endif /* !CONFIG_SMP */
-#endif /* _ASM_X86_PERCPU_H_ */
+#endif /* ASM_X86__PERCPU_H */
-#ifndef _ASM_X86_PGALLOC_H
-#define _ASM_X86_PGALLOC_H
+#ifndef ASM_X86__PGALLOC_H
+#define ASM_X86__PGALLOC_H
#include <linux/threads.h>
#include <linux/mm.h> /* for struct page */
#endif /* PAGETABLE_LEVELS > 3 */
#endif /* PAGETABLE_LEVELS > 2 */
-#endif /* _ASM_X86_PGALLOC_H */
+#endif /* ASM_X86__PGALLOC_H */
-#ifndef _I386_PGTABLE_2LEVEL_DEFS_H
-#define _I386_PGTABLE_2LEVEL_DEFS_H
+#ifndef ASM_X86__PGTABLE_2LEVEL_DEFS_H
+#define ASM_X86__PGTABLE_2LEVEL_DEFS_H
#define SHARED_KERNEL_PMD 0
#define PTRS_PER_PTE 1024
-#endif /* _I386_PGTABLE_2LEVEL_DEFS_H */
+#endif /* ASM_X86__PGTABLE_2LEVEL_DEFS_H */
-#ifndef _I386_PGTABLE_2LEVEL_H
-#define _I386_PGTABLE_2LEVEL_H
+#ifndef ASM_X86__PGTABLE_2LEVEL_H
+#define ASM_X86__PGTABLE_2LEVEL_H
#define pte_ERROR(e) \
printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte_low)
#define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp)
#endif
-#define pte_page(x) pfn_to_page(pte_pfn(x))
#define pte_none(x) (!(x).pte_low)
-#define pte_pfn(x) (pte_val(x) >> PAGE_SHIFT)
/*
* Bits 0, 6 and 7 are taken, split up the 29 bits of offset
#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_low })
#define __swp_entry_to_pte(x) ((pte_t) { .pte = (x).val })
-#endif /* _I386_PGTABLE_2LEVEL_H */
+#endif /* ASM_X86__PGTABLE_2LEVEL_H */
-#ifndef _I386_PGTABLE_3LEVEL_DEFS_H
-#define _I386_PGTABLE_3LEVEL_DEFS_H
+#ifndef ASM_X86__PGTABLE_3LEVEL_DEFS_H
+#define ASM_X86__PGTABLE_3LEVEL_DEFS_H
#ifdef CONFIG_PARAVIRT
#define SHARED_KERNEL_PMD (pv_info.shared_kernel_pmd)
*/
#define PTRS_PER_PTE 512
-#endif /* _I386_PGTABLE_3LEVEL_DEFS_H */
+#endif /* ASM_X86__PGTABLE_3LEVEL_DEFS_H */
-#ifndef _I386_PGTABLE_3LEVEL_H
-#define _I386_PGTABLE_3LEVEL_H
+#ifndef ASM_X86__PGTABLE_3LEVEL_H
+#define ASM_X86__PGTABLE_3LEVEL_H
/*
* Intel Physical Address Extension (PAE) Mode - three-level page
return a.pte_low == b.pte_low && a.pte_high == b.pte_high;
}
-#define pte_page(x) pfn_to_page(pte_pfn(x))
-
static inline int pte_none(pte_t pte)
{
return !pte.pte_low && !pte.pte_high;
}
-static inline unsigned long pte_pfn(pte_t pte)
-{
- return (pte_val(pte) & PTE_PFN_MASK) >> PAGE_SHIFT;
-}
-
/*
* Bits 0, 6 and 7 are taken in the low part of the pte,
* put the 32 bits of offset into the high part.
#define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high })
#define __swp_entry_to_pte(x) ((pte_t){ { .pte_high = (x).val } })
-#endif /* _I386_PGTABLE_3LEVEL_H */
+#endif /* ASM_X86__PGTABLE_3LEVEL_H */
-#ifndef _ASM_X86_PGTABLE_H
-#define _ASM_X86_PGTABLE_H
+#ifndef ASM_X86__PGTABLE_H
+#define ASM_X86__PGTABLE_H
#define FIRST_USER_ADDRESS 0
return pte_val(pte) & _PAGE_SPECIAL;
}
+static inline unsigned long pte_pfn(pte_t pte)
+{
+ return (pte_val(pte) & PTE_PFN_MASK) >> PAGE_SHIFT;
+}
+
+#define pte_page(pte) pfn_to_page(pte_pfn(pte))
+
static inline int pmd_large(pmd_t pte)
{
return (pmd_val(pte) & (_PAGE_PSE | _PAGE_PRESENT)) ==
static inline void native_pagetable_setup_done(pgd_t *base) {}
#endif
+extern int arch_report_meminfo(char *page);
+
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else /* !CONFIG_PARAVIRT */
#include <asm-generic/pgtable.h>
#endif /* __ASSEMBLY__ */
-#endif /* _ASM_X86_PGTABLE_H */
+#endif /* ASM_X86__PGTABLE_H */
-#ifndef _I386_PGTABLE_H
-#define _I386_PGTABLE_H
+#ifndef ASM_X86__PGTABLE_32_H
+#define ASM_X86__PGTABLE_32_H
/*
static inline void check_pgt_cache(void) { }
void paging_init(void);
+extern void set_pmd_pfn(unsigned long, unsigned long, pgprot_t);
/*
* The Linux x86 paging architecture is 'compile-time dual-mode', it
* area for the same reason. ;)
*/
#define VMALLOC_OFFSET (8 * 1024 * 1024)
-#define VMALLOC_START (((unsigned long)high_memory + 2 * VMALLOC_OFFSET - 1) \
- & ~(VMALLOC_OFFSET - 1))
+#define VMALLOC_START ((unsigned long)high_memory + VMALLOC_OFFSET)
#ifdef CONFIG_X86_PAE
#define LAST_PKMAP 512
#else
# define VMALLOC_END (FIXADDR_START - 2 * PAGE_SIZE)
#endif
+#define MAXMEM (VMALLOC_END - PAGE_OFFSET - __VMALLOC_RESERVE)
+
/*
* Define this if things work differently on an i386 and an i486:
* it will (on an i486) warn about kernel memory accesses that are
#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
remap_pfn_range(vma, vaddr, pfn, size, prot)
-#endif /* _I386_PGTABLE_H */
+#endif /* ASM_X86__PGTABLE_32_H */
-#ifndef _X86_64_PGTABLE_H
-#define _X86_64_PGTABLE_H
+#ifndef ASM_X86__PGTABLE_64_H
+#define ASM_X86__PGTABLE_64_H
#include <linux/const.h>
#ifndef __ASSEMBLY__
#define pte_present(x) (pte_val((x)) & (_PAGE_PRESENT | _PAGE_PROTNONE))
#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT)) /* FIXME: is this right? */
-#define pte_page(x) pfn_to_page(pte_pfn((x)))
-#define pte_pfn(x) ((pte_val((x)) & __PHYSICAL_MASK) >> PAGE_SHIFT)
/*
* Macro to mark a page protection value as "uncacheable".
#define __HAVE_ARCH_PTE_SAME
#endif /* !__ASSEMBLY__ */
-#endif /* _X86_64_PGTABLE_H */
+#endif /* ASM_X86__PGTABLE_64_H */
-#ifndef __ARCH_I386_POSIX_TYPES_H
-#define __ARCH_I386_POSIX_TYPES_H
+#ifndef ASM_X86__POSIX_TYPES_32_H
+#define ASM_X86__POSIX_TYPES_32_H
/*
* This file is generally used by user-level software, so you need to
#endif /* defined(__KERNEL__) */
-#endif
+#endif /* ASM_X86__POSIX_TYPES_32_H */
-#ifndef _ASM_X86_64_POSIX_TYPES_H
-#define _ASM_X86_64_POSIX_TYPES_H
+#ifndef ASM_X86__POSIX_TYPES_64_H
+#define ASM_X86__POSIX_TYPES_64_H
/*
* This file is generally used by user-level software, so you need to
#endif /* defined(__KERNEL__) */
-#endif
+#endif /* ASM_X86__POSIX_TYPES_64_H */
-#ifndef X86_64_PRCTL_H
-#define X86_64_PRCTL_H 1
+#ifndef ASM_X86__PRCTL_H
+#define ASM_X86__PRCTL_H
#define ARCH_SET_GS 0x1001
#define ARCH_SET_FS 0x1002
#define ARCH_GET_GS 0x1004
-#endif
+#endif /* ASM_X86__PRCTL_H */
-#ifndef __ASM_I386_PROCESSOR_FLAGS_H
-#define __ASM_I386_PROCESSOR_FLAGS_H
+#ifndef ASM_X86__PROCESSOR_FLAGS_H
+#define ASM_X86__PROCESSOR_FLAGS_H
/* Various flags defined: can be included from assembler. */
/*
#endif
#endif
-#endif /* __ASM_I386_PROCESSOR_FLAGS_H */
+#endif /* ASM_X86__PROCESSOR_FLAGS_H */
-#ifndef __ASM_X86_PROCESSOR_H
-#define __ASM_X86_PROCESSOR_H
+#ifndef ASM_X86__PROCESSOR_H
+#define ASM_X86__PROCESSOR_H
#include <asm/processor-flags.h>
#include <asm/msr.h>
#include <asm/desc_defs.h>
#include <asm/nops.h>
+#include <asm/ds.h>
#include <linux/personality.h>
#include <linux/cpumask.h>
#define current_cpu_data boot_cpu_data
#endif
+extern const struct seq_operations cpuinfo_op;
+
static inline int hlt_works(int cpu)
{
#ifdef CONFIG_X86_32
extern void cpu_detect(struct cpuinfo_x86 *c);
+extern struct pt_regs *idle_regs(struct pt_regs *);
+
extern void early_cpu_init(void);
extern void identify_boot_cpu(void);
extern void identify_secondary_cpu(struct cpuinfo_x86 *);
unsigned io_bitmap_max;
/* MSR_IA32_DEBUGCTLMSR value to switch in if TIF_DEBUGCTLMSR is set. */
unsigned long debugctlmsr;
-/* Debug Store - if not 0 points to a DS Save Area configuration;
- * goes into MSR_IA32_DS_AREA */
- unsigned long ds_area_msr;
+#ifdef CONFIG_X86_DS
+/* Debug Store context; see include/asm-x86/ds.h; goes into MSR_IA32_DS_AREA */
+ struct ds_context *ds_ctx;
+#endif /* CONFIG_X86_DS */
+#ifdef CONFIG_X86_PTRACE_BTS
+/* the signal to send on a bts buffer overflow */
+ unsigned int bts_ovfl_signal;
+#endif /* CONFIG_X86_PTRACE_BTS */
};
static inline unsigned long native_get_debugreg(int regno)
extern int get_tsc_mode(unsigned long adr);
extern int set_tsc_mode(unsigned int val);
-#endif
+#endif /* ASM_X86__PROCESSOR_H */
-#ifndef _ASM_X8664_PROTO_H
-#define _ASM_X8664_PROTO_H 1
+#ifndef ASM_X86__PROTO_H
+#define ASM_X86__PROTO_H
#include <asm/ldt.h>
#define round_up(x, y) (((x) + (y) - 1) & ~((y) - 1))
#define round_down(x, y) ((x) & ~((y) - 1))
-#endif
+#endif /* ASM_X86__PROTO_H */
-#ifndef _ASM_X86_PTRACE_ABI_H
-#define _ASM_X86_PTRACE_ABI_H
+#ifndef ASM_X86__PTRACE_ABI_H
+#define ASM_X86__PTRACE_ABI_H
#ifdef __i386__
#define PTRACE_SINGLEBLOCK 33 /* resume execution until next branch */
-#ifndef __ASSEMBLY__
+#ifdef CONFIG_X86_PTRACE_BTS
+#ifndef __ASSEMBLY__
#include <asm/types.h>
/* configuration/status structure used in PTRACE_BTS_CONFIG and
/* actual size of bts_struct in bytes */
__u32 bts_size;
};
-#endif
+#endif /* __ASSEMBLY__ */
#define PTRACE_BTS_O_TRACE 0x1 /* branch trace */
#define PTRACE_BTS_O_SCHED 0x2 /* scheduling events w/ jiffies */
#define PTRACE_BTS_O_SIGNAL 0x4 /* send SIG<signal> on buffer overflow
instead of wrapping around */
-#define PTRACE_BTS_O_CUT_SIZE 0x8 /* cut requested size to max available
- instead of failing */
+#define PTRACE_BTS_O_ALLOC 0x8 /* (re)allocate buffer */
#define PTRACE_BTS_CONFIG 40
/* Configure branch trace recording.
ADDR points to a struct ptrace_bts_config.
DATA gives the size of that buffer.
- A new buffer is allocated, iff the size changes.
+ A new buffer is allocated, if requested in the flags.
+ An overflow signal may only be requested for new buffers.
Returns the number of bytes read.
*/
#define PTRACE_BTS_STATUS 41
Returns the number of bytes written.
*/
#define PTRACE_BTS_SIZE 42
-/* Return the number of available BTS records.
+/* Return the number of available BTS records for draining.
DATA and ADDR are ignored.
*/
#define PTRACE_BTS_GET 43
BTS records are read from oldest to newest.
Returns number of BTS records drained.
*/
+#endif /* CONFIG_X86_PTRACE_BTS */
-#endif
+#endif /* ASM_X86__PTRACE_ABI_H */
-#ifndef _ASM_X86_PTRACE_H
-#define _ASM_X86_PTRACE_H
+#ifndef ASM_X86__PTRACE_H
+#define ASM_X86__PTRACE_H
#include <linux/compiler.h> /* For __user */
#include <asm/ptrace-abi.h>
#endif /* __KERNEL__ */
#endif /* !__i386__ */
+
+#ifdef CONFIG_X86_PTRACE_BTS
+/* a branch trace record entry
+ *
+ * In order to unify the interface between various processor versions,
+ * we use the below data structure for all processors.
+ */
+enum bts_qualifier {
+ BTS_INVALID = 0,
+ BTS_BRANCH,
+ BTS_TASK_ARRIVES,
+ BTS_TASK_DEPARTS
+};
+
+struct bts_struct {
+ __u64 qualifier;
+ union {
+ /* BTS_BRANCH */
+ struct {
+ __u64 from_ip;
+ __u64 to_ip;
+ } lbr;
+ /* BTS_TASK_ARRIVES or
+ BTS_TASK_DEPARTS */
+ __u64 jiffies;
+ } variant;
+};
+#endif /* CONFIG_X86_PTRACE_BTS */
+
#ifdef __KERNEL__
-/* the DS BTS struct is used for ptrace as well */
-#include <asm/ds.h>
+#include <linux/init.h>
+struct cpuinfo_x86;
struct task_struct;
+#ifdef CONFIG_X86_PTRACE_BTS
+extern void __cpuinit ptrace_bts_init_intel(struct cpuinfo_x86 *);
extern void ptrace_bts_take_timestamp(struct task_struct *, enum bts_qualifier);
+#else
+#define ptrace_bts_init_intel(config) do {} while (0)
+#endif /* CONFIG_X86_PTRACE_BTS */
extern unsigned long profile_pc(struct pt_regs *regs);
void signal_fault(struct pt_regs *regs, void __user *frame, char *where);
#endif
+extern long syscall_trace_enter(struct pt_regs *);
+extern void syscall_trace_leave(struct pt_regs *);
+
static inline unsigned long regs_return_value(struct pt_regs *regs)
{
return regs->ax;
return regs->bp;
}
+static inline unsigned long user_stack_pointer(struct pt_regs *regs)
+{
+ return regs->sp;
+}
+
/*
* These are defined as per linux/ptrace.h, which see.
*/
#endif /* !__ASSEMBLY__ */
-#endif
+#endif /* ASM_X86__PTRACE_H */
-#ifndef _ASM_X86_PVCLOCK_ABI_H_
-#define _ASM_X86_PVCLOCK_ABI_H_
+#ifndef ASM_X86__PVCLOCK_ABI_H
+#define ASM_X86__PVCLOCK_ABI_H
#ifndef __ASSEMBLY__
/*
} __attribute__((__packed__));
#endif /* __ASSEMBLY__ */
-#endif /* _ASM_X86_PVCLOCK_ABI_H_ */
+#endif /* ASM_X86__PVCLOCK_ABI_H */
-#ifndef _ASM_X86_PVCLOCK_H_
-#define _ASM_X86_PVCLOCK_H_
+#ifndef ASM_X86__PVCLOCK_H
+#define ASM_X86__PVCLOCK_H
#include <linux/clocksource.h>
#include <asm/pvclock-abi.h>
struct pvclock_vcpu_time_info *vcpu,
struct timespec *ts);
-#endif /* _ASM_X86_PVCLOCK_H_ */
+#endif /* ASM_X86__PVCLOCK_H */
-#ifndef _ASM_REBOOT_H
-#define _ASM_REBOOT_H
+#ifndef ASM_X86__REBOOT_H
+#define ASM_X86__REBOOT_H
struct pt_regs;
void native_machine_shutdown(void);
void machine_real_restart(const unsigned char *code, int length);
-#endif /* _ASM_REBOOT_H */
+#endif /* ASM_X86__REBOOT_H */
-#ifndef _LINUX_REBOOT_FIXUPS_H
-#define _LINUX_REBOOT_FIXUPS_H
+#ifndef ASM_X86__REBOOT_FIXUPS_H
+#define ASM_X86__REBOOT_FIXUPS_H
extern void mach_reboot_fixups(void);
-#endif /* _LINUX_REBOOT_FIXUPS_H */
+#endif /* ASM_X86__REBOOT_FIXUPS_H */
-#ifndef _ASM_REQUIRED_FEATURES_H
-#define _ASM_REQUIRED_FEATURES_H 1
+#ifndef ASM_X86__REQUIRED_FEATURES_H
+#define ASM_X86__REQUIRED_FEATURES_H
/* Define minimum CPUID feature set for kernel These bits are checked
really early to actually display a visible error message before the
# define NEED_3DNOW 0
#endif
+#if defined(CONFIG_X86_P6_NOP) || defined(CONFIG_X86_64)
+# define NEED_NOPL (1<<(X86_FEATURE_NOPL & 31))
+#else
+# define NEED_NOPL 0
+#endif
+
#ifdef CONFIG_X86_64
#define NEED_PSE 0
#define NEED_MSR (1<<(X86_FEATURE_MSR & 31))
#define REQUIRED_MASK1 (NEED_LM|NEED_3DNOW)
#define REQUIRED_MASK2 0
-#define REQUIRED_MASK3 0
+#define REQUIRED_MASK3 (NEED_NOPL)
#define REQUIRED_MASK4 0
#define REQUIRED_MASK5 0
#define REQUIRED_MASK6 0
#define REQUIRED_MASK7 0
-#endif
+#endif /* ASM_X86__REQUIRED_FEATURES_H */
-#ifndef _ASM_X86_RESUME_TRACE_H
-#define _ASM_X86_RESUME_TRACE_H
+#ifndef ASM_X86__RESUME_TRACE_H
+#define ASM_X86__RESUME_TRACE_H
#include <asm/asm.h>
do { \
if (pm_trace_enabled) { \
const void *tracedata; \
- asm volatile(_ASM_MOV_UL " $1f,%0\n" \
+ asm volatile(_ASM_MOV " $1f,%0\n" \
".section .tracedata,\"a\"\n" \
"1:\t.word %c1\n\t" \
_ASM_PTR " %c2\n" \
} \
} while (0)
-#endif
+#endif /* ASM_X86__RESUME_TRACE_H */
* Author: Laurent Vivier <Laurent.Vivier@bull.net>
*/
-#ifndef __ASM_RIO_H
-#define __ASM_RIO_H
+#ifndef ASM_X86__RIO_H
+#define ASM_X86__RIO_H
#define RIO_TABLE_VERSION 3
ALT_CALGARY = 5, /* Second Planar Calgary */
};
-#endif /* __ASM_RIO_H */
+#endif /* ASM_X86__RIO_H */
-#ifndef _ASM_X86_RWLOCK_H
-#define _ASM_X86_RWLOCK_H
+#ifndef ASM_X86__RWLOCK_H
+#define ASM_X86__RWLOCK_H
#define RW_LOCK_BIAS 0x01000000
/* Actual code is in asm/spinlock.h or in arch/x86/lib/rwlock.S */
-#endif /* _ASM_X86_RWLOCK_H */
+#endif /* ASM_X86__RWLOCK_H */
* front, then they'll all be woken up, but no other readers will be.
*/
-#ifndef _I386_RWSEM_H
-#define _I386_RWSEM_H
+#ifndef ASM_X86__RWSEM_H
+#define ASM_X86__RWSEM_H
#ifndef _LINUX_RWSEM_H
#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
}
#endif /* __KERNEL__ */
-#endif /* _I386_RWSEM_H */
+#endif /* ASM_X86__RWSEM_H */
-#ifndef _ASM_X86_SCATTERLIST_H
-#define _ASM_X86_SCATTERLIST_H
+#ifndef ASM_X86__SCATTERLIST_H
+#define ASM_X86__SCATTERLIST_H
#include <asm/types.h>
# define sg_dma_len(sg) ((sg)->dma_length)
#endif
-#endif
+#endif /* ASM_X86__SCATTERLIST_H */
-#ifndef _ASM_SECCOMP_H
-#define _ASM_SECCOMP_H
+#ifndef ASM_X86__SECCOMP_32_H
+#define ASM_X86__SECCOMP_32_H
#include <linux/thread_info.h>
#define __NR_seccomp_exit __NR_exit
#define __NR_seccomp_sigreturn __NR_sigreturn
-#endif /* _ASM_SECCOMP_H */
+#endif /* ASM_X86__SECCOMP_32_H */
-#ifndef _ASM_SECCOMP_H
-#define _ASM_SECCOMP_H
+#ifndef ASM_X86__SECCOMP_64_H
+#define ASM_X86__SECCOMP_64_H
#include <linux/thread_info.h>
#define __NR_seccomp_exit_32 __NR_ia32_exit
#define __NR_seccomp_sigreturn_32 __NR_ia32_sigreturn
-#endif /* _ASM_SECCOMP_H */
+#endif /* ASM_X86__SECCOMP_64_H */
-#ifndef _ASM_X86_SEGMENT_H_
-#define _ASM_X86_SEGMENT_H_
+#ifndef ASM_X86__SEGMENT_H
+#define ASM_X86__SEGMENT_H
/* Constructor for a conventional segment GDT (or LDT) entry */
/* This is a macro so it can be used in initializers */
#endif
#endif
-#endif
+#endif /* ASM_X86__SEGMENT_H */
-#ifndef _ASM_X86_SEMBUF_H
-#define _ASM_X86_SEMBUF_H
+#ifndef ASM_X86__SEMBUF_H
+#define ASM_X86__SEMBUF_H
/*
* The semid64_ds structure for x86 architecture.
unsigned long __unused4;
};
-#endif /* _ASM_X86_SEMBUF_H */
+#endif /* ASM_X86__SEMBUF_H */
-#ifndef _ASM_X86_SERIAL_H
-#define _ASM_X86_SERIAL_H
+#ifndef ASM_X86__SERIAL_H
+#define ASM_X86__SERIAL_H
/*
* This assumes you have a 1.8432 MHz clock for your UART.
{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
-#endif /* _ASM_X86_SERIAL_H */
+#endif /* ASM_X86__SERIAL_H */
-#ifndef _ASM_X86_SETUP_H
-#define _ASM_X86_SETUP_H
+#ifndef ASM_X86__SETUP_H
+#define ASM_X86__SETUP_H
#define COMMAND_LINE_SIZE 2048
};
extern struct x86_quirks *x86_quirks;
+extern unsigned long saved_video_mode;
#ifndef CONFIG_PARAVIRT
#define paravirt_post_allocator_init() do {} while (0)
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
-#endif /* _ASM_X86_SETUP_H */
+#endif /* ASM_X86__SETUP_H */
-#ifndef _ASM_X86_SHMBUF_H
-#define _ASM_X86_SHMBUF_H
+#ifndef ASM_X86__SHMBUF_H
+#define ASM_X86__SHMBUF_H
/*
* The shmid64_ds structure for x86 architecture.
unsigned long __unused4;
};
-#endif /* _ASM_X86_SHMBUF_H */
+#endif /* ASM_X86__SHMBUF_H */
-#ifndef _ASM_X86_SHMPARAM_H
-#define _ASM_X86_SHMPARAM_H
+#ifndef ASM_X86__SHMPARAM_H
+#define ASM_X86__SHMPARAM_H
#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
-#endif /* _ASM_X86_SHMPARAM_H */
+#endif /* ASM_X86__SHMPARAM_H */
-#ifndef _ASM_X86_SIGCONTEXT_H
-#define _ASM_X86_SIGCONTEXT_H
+#ifndef ASM_X86__SIGCONTEXT_H
+#define ASM_X86__SIGCONTEXT_H
#include <linux/compiler.h>
#include <asm/types.h>
#endif /* !__i386__ */
-#endif
+#endif /* ASM_X86__SIGCONTEXT_H */
-#ifndef _SIGCONTEXT32_H
-#define _SIGCONTEXT32_H 1
+#ifndef ASM_X86__SIGCONTEXT32_H
+#define ASM_X86__SIGCONTEXT32_H
/* signal context for 32bit programs. */
unsigned int cr2;
};
-#endif
+#endif /* ASM_X86__SIGCONTEXT32_H */
-#ifndef _ASM_X86_SIGINFO_H
-#define _ASM_X86_SIGINFO_H
+#ifndef ASM_X86__SIGINFO_H
+#define ASM_X86__SIGINFO_H
#ifdef __x86_64__
# define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int))
#include <asm-generic/siginfo.h>
-#endif
+#endif /* ASM_X86__SIGINFO_H */
-#ifndef _ASM_X86_SIGNAL_H
-#define _ASM_X86_SIGNAL_H
+#ifndef ASM_X86__SIGNAL_H
+#define ASM_X86__SIGNAL_H
#ifndef __ASSEMBLY__
#include <linux/types.h>
struct k_sigaction {
struct sigaction sa;
};
+
+extern void do_notify_resume(struct pt_regs *, void *, __u32);
+
# else /* __KERNEL__ */
/* Here we must cater to libcs that poke about in kernel headers. */
#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
-#endif
+#endif /* ASM_X86__SIGNAL_H */
-#ifndef _ASM_X86_SMP_H_
-#define _ASM_X86_SMP_H_
+#ifndef ASM_X86__SMP_H
+#define ASM_X86__SMP_H
#ifndef __ASSEMBLY__
#include <linux/cpumask.h>
#include <linux/init.h>
DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
DECLARE_PER_CPU(cpumask_t, cpu_core_map);
DECLARE_PER_CPU(u16, cpu_llc_id);
+#ifdef CONFIG_X86_32
+DECLARE_PER_CPU(int, cpu_number);
+#endif
DECLARE_EARLY_PER_CPU(u16, x86_cpu_to_apicid);
DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid);
* from the initial startup. We map APIC_BASE very early in page_setup(),
* so this is correct in the x86 case.
*/
-DECLARE_PER_CPU(int, cpu_number);
#define raw_smp_processor_id() (x86_read_percpu(cpu_number))
extern int safe_smp_processor_id(void);
#endif
#endif /* __ASSEMBLY__ */
-#endif
+#endif /* ASM_X86__SMP_H */
-#ifndef _ASM_SOCKET_H
-#define _ASM_SOCKET_H
+#ifndef ASM_X86__SOCKET_H
+#define ASM_X86__SOCKET_H
#include <asm/sockios.h>
#define SO_MARK 36
-#endif /* _ASM_SOCKET_H */
+#endif /* ASM_X86__SOCKET_H */
-#ifndef _ASM_X86_SOCKIOS_H
-#define _ASM_X86_SOCKIOS_H
+#ifndef ASM_X86__SOCKIOS_H
+#define ASM_X86__SOCKIOS_H
/* Socket-level I/O control calls. */
#define FIOSETOWN 0x8901
#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
-#endif /* _ASM_X86_SOCKIOS_H */
+#endif /* ASM_X86__SOCKIOS_H */
-#ifndef _ASM_X86_SPARSEMEM_H
-#define _ASM_X86_SPARSEMEM_H
+#ifndef ASM_X86__SPARSEMEM_H
+#define ASM_X86__SPARSEMEM_H
#ifdef CONFIG_SPARSEMEM
/*
#endif
#endif /* CONFIG_SPARSEMEM */
-#endif
+#endif /* ASM_X86__SPARSEMEM_H */
-#ifndef _X86_SPINLOCK_H_
-#define _X86_SPINLOCK_H_
+#ifndef ASM_X86__SPINLOCK_H
+#define ASM_X86__SPINLOCK_H
#include <asm/atomic.h>
#include <asm/rwlock.h>
"jne 1f\n\t"
"movw %w0,%w1\n\t"
"incb %h1\n\t"
- "lock ; cmpxchgw %w1,%2\n\t"
+ LOCK_PREFIX "cmpxchgw %w1,%2\n\t"
"1:"
"sete %b1\n\t"
"movzbl %b1,%0\n\t"
int inc = 0x00010000;
int tmp;
- asm volatile("lock ; xaddl %0, %1\n"
+ asm volatile(LOCK_PREFIX "xaddl %0, %1\n"
"movzwl %w0, %2\n\t"
"shrl $16, %0\n\t"
"1:\t"
"cmpl %0,%1\n\t"
"jne 1f\n\t"
"addl $0x00010000, %1\n\t"
- "lock ; cmpxchgl %1,%2\n\t"
+ LOCK_PREFIX "cmpxchgl %1,%2\n\t"
"1:"
"sete %b1\n\t"
"movzbl %b1,%0\n\t"
#define _raw_read_relax(lock) cpu_relax()
#define _raw_write_relax(lock) cpu_relax()
-#endif
+#endif /* ASM_X86__SPINLOCK_H */
-#ifndef __ASM_SPINLOCK_TYPES_H
-#define __ASM_SPINLOCK_TYPES_H
+#ifndef ASM_X86__SPINLOCK_TYPES_H
+#define ASM_X86__SPINLOCK_TYPES_H
#ifndef __LINUX_SPINLOCK_TYPES_H
# error "please don't include this file directly"
#define __RAW_RW_LOCK_UNLOCKED { RW_LOCK_BIAS }
-#endif
+#endif /* ASM_X86__SPINLOCK_TYPES_H */
* Send feedback to Pat Gaughen <gone@us.ibm.com>
*/
-#ifndef _ASM_SRAT_H_
-#define _ASM_SRAT_H_
+#ifndef ASM_X86__SRAT_H
+#define ASM_X86__SRAT_H
#ifdef CONFIG_ACPI_NUMA
extern int get_memcfg_from_srat(void);
}
#endif
-#endif /* _ASM_SRAT_H_ */
+#endif /* ASM_X86__SRAT_H */
-#ifndef _ASM_STACKTRACE_H
-#define _ASM_STACKTRACE_H 1
+#ifndef ASM_X86__STACKTRACE_H
+#define ASM_X86__STACKTRACE_H
extern int kstack_depth_to_print;
unsigned long *stack, unsigned long bp,
const struct stacktrace_ops *ops, void *data);
-#endif
+#endif /* ASM_X86__STACKTRACE_H */
-#ifndef _ASM_X86_STAT_H
-#define _ASM_X86_STAT_H
+#ifndef ASM_X86__STAT_H
+#define ASM_X86__STAT_H
#define STAT_HAVE_NSEC 1
#endif
};
-#endif
+#endif /* ASM_X86__STAT_H */
-#ifndef _ASM_X86_STATFS_H
-#define _ASM_X86_STATFS_H
+#ifndef ASM_X86__STATFS_H
+#define ASM_X86__STATFS_H
#ifdef __i386__
#include <asm-generic/statfs.h>
} __attribute__((packed));
#endif /* !__i386__ */
-#endif
+#endif /* ASM_X86__STATFS_H */
-#ifndef _I386_STRING_H_
-#define _I386_STRING_H_
+#ifndef ASM_X86__STRING_32_H
+#define ASM_X86__STRING_32_H
#ifdef __KERNEL__
#endif /* __KERNEL__ */
-#endif
+#endif /* ASM_X86__STRING_32_H */
-#ifndef _X86_64_STRING_H_
-#define _X86_64_STRING_H_
+#ifndef ASM_X86__STRING_64_H
+#define ASM_X86__STRING_64_H
#ifdef __KERNEL__
#endif /* __KERNEL__ */
-#endif
+#endif /* ASM_X86__STRING_64_H */
* Based on code
* Copyright 2001 Patrick Mochel <mochel@osdl.org>
*/
-#ifndef __ASM_X86_32_SUSPEND_H
-#define __ASM_X86_32_SUSPEND_H
+#ifndef ASM_X86__SUSPEND_32_H
+#define ASM_X86__SUSPEND_32_H
#include <asm/desc.h>
#include <asm/i387.h>
extern int acpi_save_state_mem(void);
#endif
-#endif /* __ASM_X86_32_SUSPEND_H */
+#endif /* ASM_X86__SUSPEND_32_H */
* Based on code
* Copyright 2001 Patrick Mochel <mochel@osdl.org>
*/
-#ifndef __ASM_X86_64_SUSPEND_H
-#define __ASM_X86_64_SUSPEND_H
+#ifndef ASM_X86__SUSPEND_64_H
+#define ASM_X86__SUSPEND_64_H
#include <asm/desc.h>
#include <asm/i387.h>
extern char core_restore_code;
extern char restore_registers;
-#endif /* __ASM_X86_64_SUSPEND_H */
+#endif /* ASM_X86__SUSPEND_64_H */
-#ifndef _ASM_SWIOTLB_H
-#define _ASM_SWIOTLB_H 1
+#ifndef ASM_X86__SWIOTLB_H
+#define ASM_X86__SWIOTLB_H
#include <asm/dma-mapping.h>
static inline void dma_mark_clean(void *addr, size_t size) {}
-#endif /* _ASM_SWIOTLB_H */
+#endif /* ASM_X86__SWIOTLB_H */
-#ifndef _I386_SYNC_BITOPS_H
-#define _I386_SYNC_BITOPS_H
+#ifndef ASM_X86__SYNC_BITOPS_H
+#define ASM_X86__SYNC_BITOPS_H
/*
* Copyright 1992, Linus Torvalds.
#undef ADDR
-#endif /* _I386_SYNC_BITOPS_H */
+#endif /* ASM_X86__SYNC_BITOPS_H */
--- /dev/null
+/*
+ * Access to user system call parameters and results
+ *
+ * Copyright (C) 2008 Red Hat, Inc. All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ *
+ * See asm-generic/syscall.h for descriptions of what we must do here.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H 1
+
+#include <linux/sched.h>
+#include <linux/err.h>
+
+static inline long syscall_get_nr(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ /*
+ * We always sign-extend a -1 value being set here,
+ * so this is always either -1L or a syscall number.
+ */
+ return regs->orig_ax;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ regs->ax = regs->orig_ax;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ unsigned long error = regs->ax;
+#ifdef CONFIG_IA32_EMULATION
+ /*
+ * TS_COMPAT is set for 32-bit syscall entries and then
+ * remains set until we return to user mode.
+ */
+ if (task_thread_info(task)->status & TS_COMPAT)
+ /*
+ * Sign-extend the value so (int)-EFOO becomes (long)-EFOO
+ * and will match correctly in comparisons.
+ */
+ error = (long) (int) error;
+#endif
+ return IS_ERR_VALUE(error) ? error : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ return regs->ax;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+ struct pt_regs *regs,
+ int error, long val)
+{
+ regs->ax = (long) error ?: val;
+}
+
+#ifdef CONFIG_X86_32
+
+static inline void syscall_get_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned int i, unsigned int n,
+ unsigned long *args)
+{
+ BUG_ON(i + n > 6);
+ memcpy(args, ®s->bx + i, n * sizeof(args[0]));
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned int i, unsigned int n,
+ const unsigned long *args)
+{
+ BUG_ON(i + n > 6);
+ memcpy(®s->bx + i, args, n * sizeof(args[0]));
+}
+
+#else /* CONFIG_X86_64 */
+
+static inline void syscall_get_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned int i, unsigned int n,
+ unsigned long *args)
+{
+# ifdef CONFIG_IA32_EMULATION
+ if (task_thread_info(task)->status & TS_COMPAT)
+ switch (i + n) {
+ case 6:
+ if (!n--) break;
+ *args++ = regs->bp;
+ case 5:
+ if (!n--) break;
+ *args++ = regs->di;
+ case 4:
+ if (!n--) break;
+ *args++ = regs->si;
+ case 3:
+ if (!n--) break;
+ *args++ = regs->dx;
+ case 2:
+ if (!n--) break;
+ *args++ = regs->cx;
+ case 1:
+ if (!n--) break;
+ *args++ = regs->bx;
+ case 0:
+ if (!n--) break;
+ default:
+ BUG();
+ break;
+ }
+ else
+# endif
+ switch (i + n) {
+ case 6:
+ if (!n--) break;
+ *args++ = regs->r9;
+ case 5:
+ if (!n--) break;
+ *args++ = regs->r8;
+ case 4:
+ if (!n--) break;
+ *args++ = regs->r10;
+ case 3:
+ if (!n--) break;
+ *args++ = regs->dx;
+ case 2:
+ if (!n--) break;
+ *args++ = regs->si;
+ case 1:
+ if (!n--) break;
+ *args++ = regs->di;
+ case 0:
+ if (!n--) break;
+ default:
+ BUG();
+ break;
+ }
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned int i, unsigned int n,
+ const unsigned long *args)
+{
+# ifdef CONFIG_IA32_EMULATION
+ if (task_thread_info(task)->status & TS_COMPAT)
+ switch (i + n) {
+ case 6:
+ if (!n--) break;
+ regs->bp = *args++;
+ case 5:
+ if (!n--) break;
+ regs->di = *args++;
+ case 4:
+ if (!n--) break;
+ regs->si = *args++;
+ case 3:
+ if (!n--) break;
+ regs->dx = *args++;
+ case 2:
+ if (!n--) break;
+ regs->cx = *args++;
+ case 1:
+ if (!n--) break;
+ regs->bx = *args++;
+ case 0:
+ if (!n--) break;
+ default:
+ BUG();
+ }
+ else
+# endif
+ switch (i + n) {
+ case 6:
+ if (!n--) break;
+ regs->r9 = *args++;
+ case 5:
+ if (!n--) break;
+ regs->r8 = *args++;
+ case 4:
+ if (!n--) break;
+ regs->r10 = *args++;
+ case 3:
+ if (!n--) break;
+ regs->dx = *args++;
+ case 2:
+ if (!n--) break;
+ regs->si = *args++;
+ case 1:
+ if (!n--) break;
+ regs->di = *args++;
+ case 0:
+ if (!n--) break;
+ default:
+ BUG();
+ }
+}
+
+#endif /* CONFIG_X86_32 */
+
+#endif /* _ASM_SYSCALL_H */
--- /dev/null
+/*
+ * syscalls.h - Linux syscall interfaces (arch-specific)
+ *
+ * Copyright (c) 2008 Jaswinder Singh
+ *
+ * This file is released under the GPLv2.
+ * See the file COPYING for more details.
+ */
+
+#ifndef _ASM_X86_SYSCALLS_H
+#define _ASM_X86_SYSCALLS_H
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/signal.h>
+
+/* Common in X86_32 and X86_64 */
+/* kernel/ioport.c */
+asmlinkage long sys_ioperm(unsigned long, unsigned long, int);
+
+/* X86_32 only */
+#ifdef CONFIG_X86_32
+/* kernel/process_32.c */
+asmlinkage int sys_fork(struct pt_regs);
+asmlinkage int sys_clone(struct pt_regs);
+asmlinkage int sys_vfork(struct pt_regs);
+asmlinkage int sys_execve(struct pt_regs);
+
+/* kernel/signal_32.c */
+asmlinkage int sys_sigsuspend(int, int, old_sigset_t);
+asmlinkage int sys_sigaction(int, const struct old_sigaction __user *,
+ struct old_sigaction __user *);
+asmlinkage int sys_sigaltstack(unsigned long);
+asmlinkage unsigned long sys_sigreturn(unsigned long);
+asmlinkage int sys_rt_sigreturn(unsigned long);
+
+/* kernel/ioport.c */
+asmlinkage long sys_iopl(unsigned long);
+
+/* kernel/ldt.c */
+asmlinkage int sys_modify_ldt(int, void __user *, unsigned long);
+
+/* kernel/sys_i386_32.c */
+asmlinkage long sys_mmap2(unsigned long, unsigned long, unsigned long,
+ unsigned long, unsigned long, unsigned long);
+struct mmap_arg_struct;
+asmlinkage int old_mmap(struct mmap_arg_struct __user *);
+struct sel_arg_struct;
+asmlinkage int old_select(struct sel_arg_struct __user *);
+asmlinkage int sys_ipc(uint, int, int, int, void __user *, long);
+struct old_utsname;
+asmlinkage int sys_uname(struct old_utsname __user *);
+struct oldold_utsname;
+asmlinkage int sys_olduname(struct oldold_utsname __user *);
+
+/* kernel/tls.c */
+asmlinkage int sys_set_thread_area(struct user_desc __user *);
+asmlinkage int sys_get_thread_area(struct user_desc __user *);
+
+/* kernel/vm86_32.c */
+asmlinkage int sys_vm86old(struct pt_regs);
+asmlinkage int sys_vm86(struct pt_regs);
+
+#else /* CONFIG_X86_32 */
+
+/* X86_64 only */
+/* kernel/process_64.c */
+asmlinkage long sys_fork(struct pt_regs *);
+asmlinkage long sys_clone(unsigned long, unsigned long,
+ void __user *, void __user *,
+ struct pt_regs *);
+asmlinkage long sys_vfork(struct pt_regs *);
+asmlinkage long sys_execve(char __user *, char __user * __user *,
+ char __user * __user *,
+ struct pt_regs *);
+
+/* kernel/ioport.c */
+asmlinkage long sys_iopl(unsigned int, struct pt_regs *);
+
+/* kernel/signal_64.c */
+asmlinkage long sys_sigaltstack(const stack_t __user *, stack_t __user *,
+ struct pt_regs *);
+asmlinkage long sys_rt_sigreturn(struct pt_regs *);
+
+/* kernel/sys_x86_64.c */
+asmlinkage long sys_mmap(unsigned long, unsigned long, unsigned long,
+ unsigned long, unsigned long, unsigned long);
+struct new_utsname;
+asmlinkage long sys_uname(struct new_utsname __user *);
+
+#endif /* CONFIG_X86_32 */
+#endif /* _ASM_X86_SYSCALLS_H */
-#ifndef _ASM_X86_SYSTEM_H_
-#define _ASM_X86_SYSTEM_H_
+#ifndef ASM_X86__SYSTEM_H
+#define ASM_X86__SYSTEM_H
#include <asm/asm.h>
#include <asm/segment.h>
alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
}
-#endif
+#endif /* ASM_X86__SYSTEM_H */
-#ifndef __ASM_SYSTEM_H
-#define __ASM_SYSTEM_H
+#ifndef ASM_X86__SYSTEM_64_H
+#define ASM_X86__SYSTEM_64_H
#include <asm/segment.h>
#include <asm/cmpxchg.h>
#include <linux/irqflags.h>
-#endif
+#endif /* ASM_X86__SYSTEM_64_H */
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#ifndef _ASM_X86_64_TCE_H
-#define _ASM_X86_64_TCE_H
+#ifndef ASM_X86__TCE_H
+#define ASM_X86__TCE_H
extern unsigned int specified_table_size;
struct iommu_table;
extern void __init free_tce_table(void *tbl);
extern int __init build_tce_table(struct pci_dev *dev, void __iomem *bbar);
-#endif /* _ASM_X86_64_TCE_H */
+#endif /* ASM_X86__TCE_H */
-#ifndef _ASM_X86_TERMBITS_H
-#define _ASM_X86_TERMBITS_H
+#ifndef ASM_X86__TERMBITS_H
+#define ASM_X86__TERMBITS_H
#include <linux/posix_types.h>
#define TCSADRAIN 1
#define TCSAFLUSH 2
-#endif /* _ASM_X86_TERMBITS_H */
+#endif /* ASM_X86__TERMBITS_H */
-#ifndef _ASM_X86_TERMIOS_H
-#define _ASM_X86_TERMIOS_H
+#ifndef ASM_X86__TERMIOS_H
+#define ASM_X86__TERMIOS_H
#include <asm/termbits.h>
#include <asm/ioctls.h>
#endif /* __KERNEL__ */
-#endif /* _ASM_X86_TERMIOS_H */
+#endif /* ASM_X86__TERMIOS_H */
-#ifndef __ASM_I386_THERM_THROT_H__
-#define __ASM_I386_THERM_THROT_H__ 1
+#ifndef ASM_X86__THERM_THROT_H
+#define ASM_X86__THERM_THROT_H
#include <asm/atomic.h>
extern atomic_t therm_throt_en;
int therm_throt_process(int curr);
-#endif /* __ASM_I386_THERM_THROT_H__ */
+#endif /* ASM_X86__THERM_THROT_H */
* - Incorporating suggestions made by Linus Torvalds and Dave Miller
*/
-#ifndef _ASM_X86_THREAD_INFO_H
-#define _ASM_X86_THREAD_INFO_H
+#ifndef ASM_X86__THREAD_INFO_H
+#define ASM_X86__THREAD_INFO_H
#include <linux/compiler.h>
#include <asm/page.h>
* Warning: layout of LSW is hardcoded in entry.S
*/
#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_NOTIFY_RESUME 1 /* callback before returning to user */
#define TIF_SIGPENDING 2 /* signal pending */
#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
#define TIF_SINGLESTEP 4 /* reenable singlestep on user return*/
#define TIF_BTS_TRACE_TS 27 /* record scheduling event timestamps */
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
/* Only used for 64 bit */
#define _TIF_DO_NOTIFY_MASK \
- (_TIF_SIGPENDING|_TIF_MCE_NOTIFY)
+ (_TIF_SIGPENDING|_TIF_MCE_NOTIFY|_TIF_NOTIFY_RESUME)
/* flags to check in __switch_to() */
#define _TIF_WORK_CTXSW \
extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
#define arch_task_cache_init arch_task_cache_init
#endif
-#endif /* _ASM_X86_THREAD_INFO_H */
+#endif /* ASM_X86__THREAD_INFO_H */
-#ifndef _ASMX86_TIME_H
-#define _ASMX86_TIME_H
+#ifndef ASM_X86__TIME_H
+#define ASM_X86__TIME_H
extern void hpet_time_init(void);
#endif
+extern void time_init(void);
+
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else /* !CONFIG_PARAVIRT */
extern unsigned long __init calibrate_cpu(void);
-#endif
+#endif /* ASM_X86__TIME_H */
-#ifndef _ASMi386_TIMER_H
-#define _ASMi386_TIMER_H
+#ifndef ASM_X86__TIMER_H
+#define ASM_X86__TIMER_H
#include <linux/init.h>
#include <linux/pm.h>
#include <linux/percpu.h>
unsigned long long native_sched_clock(void);
unsigned long native_calibrate_tsc(void);
+#ifdef CONFIG_X86_32
extern int timer_ack;
-extern int no_timer_check;
extern int recalibrate_cpu_khz(void);
+#endif /* CONFIG_X86_32 */
+
+extern int no_timer_check;
#ifndef CONFIG_PARAVIRT
#define calibrate_tsc() native_calibrate_tsc()
return ns;
}
-#endif
+#endif /* ASM_X86__TIMER_H */
/* x86 architecture timex specifications */
-#ifndef _ASM_X86_TIMEX_H
-#define _ASM_X86_TIMEX_H
+#ifndef ASM_X86__TIMEX_H
+#define ASM_X86__TIMEX_H
#include <asm/processor.h>
#include <asm/tsc.h>
#define ARCH_HAS_READ_CURRENT_TIMER
-#endif
+#endif /* ASM_X86__TIMEX_H */
-#ifndef _ASM_X86_TLB_H
-#define _ASM_X86_TLB_H
+#ifndef ASM_X86__TLB_H
+#define ASM_X86__TLB_H
#define tlb_start_vma(tlb, vma) do { } while (0)
#define tlb_end_vma(tlb, vma) do { } while (0)
#include <asm-generic/tlb.h>
-#endif
+#endif /* ASM_X86__TLB_H */
-#ifndef _ASM_X86_TLBFLUSH_H
-#define _ASM_X86_TLBFLUSH_H
+#ifndef ASM_X86__TLBFLUSH_H
+#define ASM_X86__TLBFLUSH_H
#include <linux/mm.h>
#include <linux/sched.h>
flush_tlb_all();
}
-#endif /* _ASM_X86_TLBFLUSH_H */
+#endif /* ASM_X86__TLBFLUSH_H */
*
* Send feedback to <colpatch@us.ibm.com>
*/
-#ifndef _ASM_X86_TOPOLOGY_H
-#define _ASM_X86_TOPOLOGY_H
+#ifndef ASM_X86__TOPOLOGY_H
+#define ASM_X86__TOPOLOGY_H
#ifdef CONFIG_X86_32
# ifdef CONFIG_X86_HT
}
#endif
-#endif /* _ASM_X86_TOPOLOGY_H */
+#endif /* ASM_X86__TOPOLOGY_H */
-#ifndef __TRAMPOLINE_HEADER
-#define __TRAMPOLINE_HEADER
+#ifndef ASM_X86__TRAMPOLINE_H
+#define ASM_X86__TRAMPOLINE_H
#ifndef __ASSEMBLY__
#endif /* __ASSEMBLY__ */
-#endif /* __TRAMPOLINE_HEADER */
+#endif /* ASM_X86__TRAMPOLINE_H */
-#ifndef _ASM_X86_TRAPS_H
-#define _ASM_X86_TRAPS_H
+#ifndef ASM_X86__TRAPS_H
+#define ASM_X86__TRAPS_H
/* Common in X86_32 and X86_64 */
asmlinkage void divide_error(void);
unsigned long patch_espfix_desc(unsigned long, unsigned long);
asmlinkage void math_emulate(long);
+void do_page_fault(struct pt_regs *regs, unsigned long error_code);
+
#else /* CONFIG_X86_32 */
asmlinkage void double_fault(void);
asmlinkage void do_simd_coprocessor_error(struct pt_regs *);
asmlinkage void do_spurious_interrupt_bug(struct pt_regs *);
+asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code);
+
#endif /* CONFIG_X86_32 */
-#endif /* _ASM_X86_TRAPS_H */
+#endif /* ASM_X86__TRAPS_H */
/*
* x86 TSC related functions
*/
-#ifndef _ASM_X86_TSC_H
-#define _ASM_X86_TSC_H
+#ifndef ASM_X86__TSC_H
+#define ASM_X86__TSC_H
#include <asm/processor.h>
extern int notsc_setup(char *);
-#endif
+#endif /* ASM_X86__TSC_H */
-#ifndef _ASM_X86_TYPES_H
-#define _ASM_X86_TYPES_H
+#ifndef ASM_X86__TYPES_H
+#define ASM_X86__TYPES_H
#include <asm-generic/int-ll64.h>
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
-#endif
+#endif /* ASM_X86__TYPES_H */
-#ifndef _ASM_UACCES_H_
-#define _ASM_UACCES_H_
+#ifndef ASM_X86__UACCESS_H
+#define ASM_X86__UACCESS_H
/*
* User space memory access functions
*/
# include "uaccess_64.h"
#endif
-#endif
+#endif /* ASM_X86__UACCESS_H */
-#ifndef __i386_UACCESS_H
-#define __i386_UACCESS_H
+#ifndef ASM_X86__UACCESS_32_H
+#define ASM_X86__UACCESS_32_H
/*
* User space memory access functions
unsigned long __must_check clear_user(void __user *mem, unsigned long len);
unsigned long __must_check __clear_user(void __user *mem, unsigned long len);
-#endif /* __i386_UACCESS_H */
+#endif /* ASM_X86__UACCESS_32_H */
-#ifndef __X86_64_UACCESS_H
-#define __X86_64_UACCESS_H
+#ifndef ASM_X86__UACCESS_64_H
+#define ASM_X86__UACCESS_64_H
/*
* User space memory access functions
#include <linux/compiler.h>
#include <linux/errno.h>
#include <linux/prefetch.h>
+#include <linux/lockdep.h>
#include <asm/page.h>
/*
unsigned long
copy_user_handle_tail(char *to, char *from, unsigned len, unsigned zerorest);
-#endif /* __X86_64_UACCESS_H */
+#endif /* ASM_X86__UACCESS_64_H */
-#ifndef _ASM_X86_UCONTEXT_H
-#define _ASM_X86_UCONTEXT_H
+#ifndef ASM_X86__UCONTEXT_H
+#define ASM_X86__UCONTEXT_H
struct ucontext {
unsigned long uc_flags;
sigset_t uc_sigmask; /* mask last for extensibility */
};
-#endif /* _ASM_X86_UCONTEXT_H */
+#endif /* ASM_X86__UCONTEXT_H */
-#ifndef _ASM_X86_UNALIGNED_H
-#define _ASM_X86_UNALIGNED_H
+#ifndef ASM_X86__UNALIGNED_H
+#define ASM_X86__UNALIGNED_H
/*
* The x86 can do unaligned accesses itself.
#define get_unaligned __get_unaligned_le
#define put_unaligned __put_unaligned_le
-#endif /* _ASM_X86_UNALIGNED_H */
+#endif /* ASM_X86__UNALIGNED_H */
-#ifndef _ASM_I386_UNISTD_H_
-#define _ASM_I386_UNISTD_H_
+#ifndef ASM_X86__UNISTD_32_H
+#define ASM_X86__UNISTD_32_H
/*
* This file contains the system call numbers.
#endif
#endif /* __KERNEL__ */
-#endif /* _ASM_I386_UNISTD_H_ */
+#endif /* ASM_X86__UNISTD_32_H */
-#ifndef _ASM_X86_64_UNISTD_H_
-#define _ASM_X86_64_UNISTD_H_
+#ifndef ASM_X86__UNISTD_64_H
+#define ASM_X86__UNISTD_64_H
#ifndef __SYSCALL
#define __SYSCALL(a, b)
#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
#endif /* __KERNEL__ */
-#endif /* _ASM_X86_64_UNISTD_H_ */
+#endif /* ASM_X86__UNISTD_64_H */
-#ifndef _ASM_X86_UNWIND_H
-#define _ASM_X86_UNWIND_H
+#ifndef ASM_X86__UNWIND_H
+#define ASM_X86__UNWIND_H
#define UNW_PC(frame) ((void)(frame), 0UL)
#define UNW_SP(frame) ((void)(frame), 0UL)
return 0;
}
-#endif /* _ASM_X86_UNWIND_H */
+#endif /* ASM_X86__UNWIND_H */
-#ifndef USER32_H
-#define USER32_H 1
+#ifndef ASM_X86__USER32_H
+#define ASM_X86__USER32_H
/* IA32 compatible user structures for ptrace.
* These should be used for 32bit coredumps too. */
};
-#endif
+#endif /* ASM_X86__USER32_H */
-#ifndef _I386_USER_H
-#define _I386_USER_H
+#ifndef ASM_X86__USER_32_H
+#define ASM_X86__USER_32_H
#include <asm/page.h>
/* Core file format: The core file is written in such a way that gdb
#define HOST_TEXT_START_ADDR (u.start_code)
#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-#endif /* _I386_USER_H */
+#endif /* ASM_X86__USER_32_H */
-#ifndef _X86_64_USER_H
-#define _X86_64_USER_H
+#ifndef ASM_X86__USER_64_H
+#define ASM_X86__USER_64_H
#include <asm/types.h>
#include <asm/page.h>
#define HOST_TEXT_START_ADDR (u.start_code)
#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-#endif /* _X86_64_USER_H */
+#endif /* ASM_X86__USER_64_H */
-#ifndef _ASM_X86_BIOS_H
-#define _ASM_X86_BIOS_H
+#ifndef ASM_X86__UV__BIOS_H
+#define ASM_X86__UV__BIOS_H
/*
* BIOS layer definitions.
unsigned long *drift_info);
extern const char *x86_bios_strerror(long status);
-#endif /* _ASM_X86_BIOS_H */
+#endif /* ASM_X86__UV__BIOS_H */
* Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
*/
-#ifndef __ASM_X86_UV_BAU__
-#define __ASM_X86_UV_BAU__
+#ifndef ASM_X86__UV__UV_BAU_H
+#define ASM_X86__UV__UV_BAU_H
#include <linux/bitmap.h>
#define BITSPERBYTE 8
extern void uv_bau_message_intr1(void);
extern void uv_bau_timeout_intr1(void);
-#endif /* __ASM_X86_UV_BAU__ */
+#endif /* ASM_X86__UV__UV_BAU_H */
* Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
*/
-#ifndef __ASM_X86_UV_HUB_H__
-#define __ASM_X86_UV_HUB_H__
+#ifndef ASM_X86__UV__UV_HUB_H
+#define ASM_X86__UV__UV_HUB_H
#include <linux/numa.h>
#include <linux/percpu.h>
return uv_possible_blades;
}
-#endif /* __ASM_X86_UV_HUB__ */
+#endif /* ASM_X86__UV__UV_HUB_H */
* Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
*/
-#ifndef __ASM_X86_UV_MMRS__
-#define __ASM_X86_UV_MMRS__
+#ifndef ASM_X86__UV__UV_MMRS_H
+#define ASM_X86__UV__UV_MMRS_H
#define UV_MMR_ENABLE (1UL << 63)
};
-#endif /* __ASM_X86_UV_MMRS__ */
+#endif /* ASM_X86__UV__UV_MMRS_H */
-#ifndef _ASM_X86_VDSO_H
-#define _ASM_X86_VDSO_H 1
+#ifndef ASM_X86__VDSO_H
+#define ASM_X86__VDSO_H
#ifdef CONFIG_X86_64
extern const char VDSO64_PRELINK[];
extern const char vdso32_syscall_start, vdso32_syscall_end;
extern const char vdso32_sysenter_start, vdso32_sysenter_end;
-#endif /* asm-x86/vdso.h */
+#endif /* ASM_X86__VDSO_H */
* (c) 1998 Martin Mares <mj@ucw.cz>
*/
-#ifndef _LINUX_ASM_VGA_H_
-#define _LINUX_ASM_VGA_H_
+#ifndef ASM_X86__VGA_H
+#define ASM_X86__VGA_H
/*
* On the PC, we can just recalculate addresses and then
#define vga_readb(x) (*(x))
#define vga_writeb(x, y) (*(y) = (x))
-#endif
+#endif /* ASM_X86__VGA_H */
-#ifndef _ASM_VGTOD_H
-#define _ASM_VGTOD_H 1
+#ifndef ASM_X86__VGTOD_H
+#define ASM_X86__VGTOD_H
#include <asm/vsyscall.h>
#include <linux/clocksource.h>
__section_vsyscall_gtod_data;
extern struct vsyscall_gtod_data vsyscall_gtod_data;
-#endif
+#endif /* ASM_X86__VGTOD_H */
-#ifndef __I386_SGI_COBALT_H
-#define __I386_SGI_COBALT_H
+#ifndef ASM_X86__VISWS__COBALT_H
+#define ASM_X86__VISWS__COBALT_H
#include <asm/fixmap.h>
extern char visws_board_rev;
-#endif /* __I386_SGI_COBALT_H */
+#endif /* ASM_X86__VISWS__COBALT_H */
-#ifndef __I386_SGI_LITHIUM_H
-#define __I386_SGI_LITHIUM_H
+#ifndef ASM_X86__VISWS__LITHIUM_H
+#define ASM_X86__VISWS__LITHIUM_H
#include <asm/fixmap.h>
return *((volatile unsigned short *)(LI_PCIB_VADDR+reg));
}
-#endif
+#endif /* ASM_X86__VISWS__LITHIUM_H */
-#ifndef __I386_SGI_PIIX_H
-#define __I386_SGI_PIIX_H
+#ifndef ASM_X86__VISWS__PIIX4_H
+#define ASM_X86__VISWS__PIIX4_H
/*
* PIIX4 as used on SGI Visual Workstations
*/
#define PIIX_GPI_STPCLK 0x4 // STPCLK signal routed back in
-#endif
+#endif /* ASM_X86__VISWS__PIIX4_H */
-#ifndef _LINUX_VM86_H
-#define _LINUX_VM86_H
+#ifndef ASM_X86__VM86_H
+#define ASM_X86__VM86_H
/*
* I'm guessing at the VIF/VIP flag usage, but hope that this is how
#endif /* __KERNEL__ */
-#endif
+#endif /* ASM_X86__VM86_H */
*
*/
-#ifndef __VMI_TIME_H
-#define __VMI_TIME_H
+#ifndef ASM_X86__VMI_TIME_H
+#define ASM_X86__VMI_TIME_H
/*
* Raw VMI call indices for timer functions
#define CONFIG_VMI_ALARM_HZ 100
-#endif
+#endif /* ASM_X86__VMI_TIME_H */
-#ifndef _ASM_X86_64_VSYSCALL_H_
-#define _ASM_X86_64_VSYSCALL_H_
+#ifndef ASM_X86__VSYSCALL_H
+#define ASM_X86__VSYSCALL_H
enum vsyscall_num {
__NR_vgettimeofday,
#endif /* __KERNEL__ */
-#endif /* _ASM_X86_64_VSYSCALL_H_ */
+#endif /* ASM_X86__VSYSCALL_H */
-#ifndef __XEN_EVENTS_H
-#define __XEN_EVENTS_H
+#ifndef ASM_X86__XEN__EVENTS_H
+#define ASM_X86__XEN__EVENTS_H
enum ipi_vector {
XEN_RESCHEDULE_VECTOR,
do_IRQ(regs);
}
-#endif /* __XEN_EVENTS_H */
+#endif /* ASM_X86__XEN__EVENTS_H */
-#ifndef __XEN_GRANT_TABLE_H
-#define __XEN_GRANT_TABLE_H
+#ifndef ASM_X86__XEN__GRANT_TABLE_H
+#define ASM_X86__XEN__GRANT_TABLE_H
#define xen_alloc_vm_area(size) alloc_vm_area(size)
#define xen_free_vm_area(area) free_vm_area(area)
-#endif /* __XEN_GRANT_TABLE_H */
+#endif /* ASM_X86__XEN__GRANT_TABLE_H */
* IN THE SOFTWARE.
*/
-#ifndef __HYPERCALL_H__
-#define __HYPERCALL_H__
+#ifndef ASM_X86__XEN__HYPERCALL_H
+#define ASM_X86__XEN__HYPERCALL_H
#include <linux/errno.h>
#include <linux/string.h>
mcl->args[1] = esp;
}
-#endif /* __HYPERCALL_H__ */
+#endif /* ASM_X86__XEN__HYPERCALL_H */
* IN THE SOFTWARE.
*/
-#ifndef __HYPERVISOR_H__
-#define __HYPERVISOR_H__
+#ifndef ASM_X86__XEN__HYPERVISOR_H
+#define ASM_X86__XEN__HYPERVISOR_H
#include <linux/types.h>
#include <linux/kernel.h>
#define is_running_on_xen() (xen_start_info ? 1 : 0)
-#endif /* __HYPERVISOR_H__ */
+#endif /* ASM_X86__XEN__HYPERVISOR_H */
* Copyright (c) 2004, K A Fraser
*/
-#ifndef __ASM_X86_XEN_INTERFACE_H
-#define __ASM_X86_XEN_INTERFACE_H
+#ifndef ASM_X86__XEN__INTERFACE_H
+#define ASM_X86__XEN__INTERFACE_H
#ifdef __XEN__
#define __DEFINE_GUEST_HANDLE(name, type) \
#define XEN_CPUID XEN_EMULATE_PREFIX "cpuid"
#endif
-#endif /* __ASM_X86_XEN_INTERFACE_H */
+#endif /* ASM_X86__XEN__INTERFACE_H */
* Copyright (c) 2004, K A Fraser
*/
-#ifndef __ASM_X86_XEN_INTERFACE_32_H
-#define __ASM_X86_XEN_INTERFACE_32_H
+#ifndef ASM_X86__XEN__INTERFACE_32_H
+#define ASM_X86__XEN__INTERFACE_32_H
/*
#define xen_pfn_to_cr3(pfn) (((unsigned)(pfn) << 12) | ((unsigned)(pfn) >> 20))
#define xen_cr3_to_pfn(cr3) (((unsigned)(cr3) >> 12) | ((unsigned)(cr3) << 20))
-#endif /* __ASM_X86_XEN_INTERFACE_32_H */
+#endif /* ASM_X86__XEN__INTERFACE_32_H */
-#ifndef __ASM_X86_XEN_INTERFACE_64_H
-#define __ASM_X86_XEN_INTERFACE_64_H
+#ifndef ASM_X86__XEN__INTERFACE_64_H
+#define ASM_X86__XEN__INTERFACE_64_H
/*
* 64-bit segment selectors
#endif /* !__ASSEMBLY__ */
-#endif /* __ASM_X86_XEN_INTERFACE_64_H */
+#endif /* ASM_X86__XEN__INTERFACE_64_H */
-#ifndef __XEN_PAGE_H
-#define __XEN_PAGE_H
+#ifndef ASM_X86__XEN__PAGE_H
+#define ASM_X86__XEN__PAGE_H
#include <linux/pfn.h>
void make_lowmem_page_readonly(void *vaddr);
void make_lowmem_page_readwrite(void *vaddr);
-#endif /* __XEN_PAGE_H */
+#endif /* ASM_X86__XEN__PAGE_H */
unifdef-y += adb.h
unifdef-y += adfs_fs.h
unifdef-y += agpgart.h
-ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
+ $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
unifdef-y += a.out.h
endif
unifdef-y += apm_bios.h
unifdef-y += kernelcapi.h
unifdef-y += kernel.h
unifdef-y += keyboard.h
-ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
+ $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
unifdef-y += kvm.h
endif
unifdef-y += llc.h
unifdef-y += patchkey.h
unifdef-y += pci.h
unifdef-y += personality.h
-unifdef-y += pim.h
unifdef-y += pktcdvd.h
unifdef-y += pmu.h
unifdef-y += poll.h
static inline int lba_28_ok(u64 block, u32 n_block)
{
/* check the ending block number */
- return ((block + n_block - 1) < ((u64)1 << 28)) && (n_block <= 256);
+ return ((block + n_block) < ((u64)1 << 28)) && (n_block <= 256);
}
static inline int lba_48_ok(u64 block, u32 n_block)
*/
extern int blk_verify_command(struct blk_cmd_filter *filter,
unsigned char *cmd, int has_write_perm);
-extern int blk_register_filter(struct gendisk *disk);
-extern void blk_unregister_filter(struct gendisk *disk);
extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter);
#define MAX_PHYS_SEGMENTS 128
extern int clockevents_program_event(struct clock_event_device *dev,
ktime_t expires, ktime_t now);
+extern void clockevents_handle_noop(struct clock_event_device *dev);
+
#ifdef CONFIG_GENERIC_CLOCKEVENTS
extern void clockevents_notify(unsigned long reason, void *arg);
#else
/*
- * include/asm/cnt32_to_63.h -- extend a 32-bit counter to 63 bits
+ * Extend a 32-bit counter to 63 bits
*
* Author: Nicolas Pitre
* Created: December 3, 2006
* as published by the Free Software Foundation.
*/
-#ifndef __INCLUDE_CNT32_TO_63_H__
-#define __INCLUDE_CNT32_TO_63_H__
+#ifndef __LINUX_CNT32_TO_63_H__
+#define __LINUX_CNT32_TO_63_H__
#include <linux/compiler.h>
-#include <asm/types.h>
+#include <linux/types.h>
#include <asm/byteorder.h>
-/*
- * Prototype: u64 cnt32_to_63(u32 cnt)
+/* this is used only to give gcc a clue about good code generation */
+union cnt32_to_63 {
+ struct {
+#if defined(__LITTLE_ENDIAN)
+ u32 lo, hi;
+#elif defined(__BIG_ENDIAN)
+ u32 hi, lo;
+#endif
+ };
+ u64 val;
+};
+
+
+/**
+ * cnt32_to_63 - Expand a 32-bit counter to a 63-bit counter
+ * @cnt_lo: The low part of the counter
+ *
* Many hardware clock counters are only 32 bits wide and therefore have
* a relatively short period making wrap-arounds rather frequent. This
* is a problem when implementing sched_clock() for example, where a 64-bit
* clear-bit instruction. Otherwise caller must remember to clear the top
* bit explicitly.
*/
-
-/* this is used only to give gcc a clue about good code generation */
-typedef union {
- struct {
-#if defined(__LITTLE_ENDIAN)
- u32 lo, hi;
-#elif defined(__BIG_ENDIAN)
- u32 hi, lo;
-#endif
- };
- u64 val;
-} cnt32_to_63_t;
-
#define cnt32_to_63(cnt_lo) \
({ \
- static volatile u32 __m_cnt_hi = 0; \
- cnt32_to_63_t __x; \
+ static volatile u32 __m_cnt_hi; \
+ union cnt32_to_63 __x; \
__x.hi = __m_cnt_hi; \
__x.lo = (cnt_lo); \
- if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \
+ if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \
__m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \
__x.val; \
})
static inline void rebuild_sched_domains(void)
{
- partition_sched_domains(0, NULL, NULL);
+ partition_sched_domains(1, NULL, NULL);
}
#endif /* !CONFIG_CPUSETS */
* HRTIMER_CB_IRQSAFE: Callback may run in hardirq context
* HRTIMER_CB_IRQSAFE_NO_RESTART: Callback may run in hardirq context and
* does not restart the timer
- * HRTIMER_CB_IRQSAFE_NO_SOFTIRQ: Callback must run in hardirq context
- * Special mode for tick emultation
+ * HRTIMER_CB_IRQSAFE_PERCPU: Callback must run in hardirq context
+ * Special mode for tick emulation and
+ * scheduler timer. Such timers are per
+ * cpu and not allowed to be migrated on
+ * cpu unplug.
+ * HRTIMER_CB_IRQSAFE_UNLOCKED: Callback should run in hardirq context
+ * with timer->base lock unlocked
+ * used for timers which call wakeup to
+ * avoid lock order problems with rq->lock
*/
enum hrtimer_cb_mode {
HRTIMER_CB_SOFTIRQ,
HRTIMER_CB_IRQSAFE,
HRTIMER_CB_IRQSAFE_NO_RESTART,
- HRTIMER_CB_IRQSAFE_NO_SOFTIRQ,
+ HRTIMER_CB_IRQSAFE_PERCPU,
+ HRTIMER_CB_IRQSAFE_UNLOCKED,
};
/*
* 0x02 callback function running
* 0x04 callback pending (high resolution mode)
*
- * Special case:
+ * Special cases:
* 0x03 callback function running and enqueued
* (was requeued on another CPU)
+ * 0x09 timer was migrated on CPU hotunplug
* The "callback function running and enqueued" status is only possible on
* SMP. It happens for example when a posix timer expired and the callback
* queued a signal. Between dropping the lock which protects the posix timer
#define HRTIMER_STATE_ENQUEUED 0x01
#define HRTIMER_STATE_CALLBACK 0x02
#define HRTIMER_STATE_PENDING 0x04
+#define HRTIMER_STATE_MIGRATE 0x08
/**
* struct hrtimer - the basic hrtimer structure
/**
* struct i2c_driver - represent an I2C device driver
+ * @id: Unique driver ID (optional)
* @class: What kind of i2c device we instantiate (for detect)
+ * @attach_adapter: Callback for bus addition (for legacy drivers)
+ * @detach_adapter: Callback for bus removal (for legacy drivers)
+ * @detach_client: Callback for device removal (for legacy drivers)
+ * @probe: Callback for device binding (new-style drivers)
+ * @remove: Callback for device unbinding (new-style drivers)
+ * @shutdown: Callback for device shutdown
+ * @suspend: Callback for device suspend
+ * @resume: Callback for device resume
+ * @command: Callback for bus-wide signaling (optional)
+ * @driver: Device driver model driver
+ * @id_table: List of I2C devices supported by this driver
* @detect: Callback for device detection
* @address_data: The I2C addresses to probe, ignore or force (for detect)
* @clients: List of detected clients we created (for i2c-core use only)
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
int ide_pci_set_master(struct pci_dev *, const char *);
unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
-extern const struct ide_dma_ops sff_dma_ops;
int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
#else
int ide_dma_test_irq(ide_drive_t *);
extern void ide_dma_lost_irq(ide_drive_t *);
extern void ide_dma_timeout(ide_drive_t *);
+extern const struct ide_dma_ops sff_dma_ops;
#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
#else
static inline int hwif_to_node(ide_hwif_t *hwif)
{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- return hwif->dev ? pcibus_to_node(dev->bus) : -1;
+ return hwif->dev ? dev_to_node(hwif->dev) : -1;
}
static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive)
extern int request_resource(struct resource *root, struct resource *new);
extern int release_resource(struct resource *new);
extern int insert_resource(struct resource *parent, struct resource *new);
+extern void insert_resource_expand_to_fit(struct resource *root, struct resource *new);
extern int allocate_resource(struct resource *root, struct resource *new,
resource_size_t size, resource_size_t min,
resource_size_t max, resource_size_t align,
struct resource *parent, resource_size_t start,
resource_size_t n, const char *name);
-#define devm_release_region(start,n) \
+#define devm_release_region(dev, start, n) \
__devm_release_region(dev, &ioport_resource, (start), (n))
-#define devm_release_mem_region(start,n) \
+#define devm_release_mem_region(dev, start, n) \
__devm_release_region(dev, &iomem_resource, (start), (n))
extern void __devm_release_region(struct device *dev, struct resource *parent,
next->next->pprev = &next->next;
}
+/*
+ * Move a list from one list head to another. Fixup the pprev
+ * reference of the first entry if it exists.
+ */
+static inline void hlist_move_list(struct hlist_head *old,
+ struct hlist_head *new)
+{
+ new->first = old->first;
+ if (new->first)
+ new->first->pprev = &new->first;
+ old->first = NULL;
+}
+
#define hlist_entry(ptr, type, member) container_of(ptr,type,member)
#define hlist_for_each(pos, head) \
struct ms_status_register {
unsigned char reserved;
unsigned char interrupt;
-#define MEMSTICK_INT_CMDNAK 0x0001
-#define MEMSTICK_INT_IOREQ 0x0008
-#define MEMSTICK_INT_IOBREQ 0x0010
-#define MEMSTICK_INT_BREQ 0x0020
-#define MEMSTICK_INT_ERR 0x0040
-#define MEMSTICK_INT_CED 0x0080
+#define MEMSTICK_INT_CMDNAK 0x01
+#define MEMSTICK_INT_IOREQ 0x08
+#define MEMSTICK_INT_IOBREQ 0x10
+#define MEMSTICK_INT_BREQ 0x20
+#define MEMSTICK_INT_ERR 0x40
+#define MEMSTICK_INT_CED 0x80
unsigned char status0;
-#define MEMSTICK_STATUS0_WP 0x0001
-#define MEMSTICK_STATUS0_SL 0x0002
-#define MEMSTICK_STATUS0_BF 0x0010
-#define MEMSTICK_STATUS0_BE 0x0020
-#define MEMSTICK_STATUS0_FB0 0x0040
-#define MEMSTICK_STATUS0_MB 0x0080
+#define MEMSTICK_STATUS0_WP 0x01
+#define MEMSTICK_STATUS0_SL 0x02
+#define MEMSTICK_STATUS0_BF 0x10
+#define MEMSTICK_STATUS0_BE 0x20
+#define MEMSTICK_STATUS0_FB0 0x40
+#define MEMSTICK_STATUS0_MB 0x80
unsigned char status1;
-#define MEMSTICK_STATUS1_UCFG 0x0001
-#define MEMSTICK_STATUS1_FGER 0x0002
-#define MEMSTICK_STATUS1_UCEX 0x0004
-#define MEMSTICK_STATUS1_EXER 0x0008
-#define MEMSTICK_STATUS1_UCDT 0x0010
-#define MEMSTICK_STATUS1_DTER 0x0020
-#define MEMSTICK_STATUS1_FBI 0x0040
-#define MEMSTICK_STATUS1_MB 0x0080
+#define MEMSTICK_STATUS1_UCFG 0x01
+#define MEMSTICK_STATUS1_FGER 0x02
+#define MEMSTICK_STATUS1_UCEX 0x04
+#define MEMSTICK_STATUS1_EXER 0x08
+#define MEMSTICK_STATUS1_UCDT 0x10
+#define MEMSTICK_STATUS1_DTER 0x20
+#define MEMSTICK_STATUS1_FB1 0x40
+#define MEMSTICK_STATUS1_MB 0x80
} __attribute__((packed));
struct ms_id_register {
struct ms_param_register {
unsigned char system;
-#define MEMSTICK_SYS_ATEN 0xc0
-#define MEMSTICK_SYS_BAMD 0x80
#define MEMSTICK_SYS_PAM 0x08
+#define MEMSTICK_SYS_BAMD 0x80
unsigned char block_address_msb;
unsigned short block_address;
unsigned char cp;
-#define MEMSTICK_CP_BLOCK 0x0000
-#define MEMSTICK_CP_PAGE 0x0020
-#define MEMSTICK_CP_EXTRA 0x0040
-#define MEMSTICK_CP_OVERWRITE 0x0080
+#define MEMSTICK_CP_BLOCK 0x00
+#define MEMSTICK_CP_PAGE 0x20
+#define MEMSTICK_CP_EXTRA 0x40
+#define MEMSTICK_CP_OVERWRITE 0x80
unsigned char page_address;
} __attribute__((packed));
struct ms_extra_data_register {
unsigned char overwrite_flag;
-#define MEMSTICK_OVERWRITE_UPDATA 0x0010
-#define MEMSTICK_OVERWRITE_PAGE 0x0060
-#define MEMSTICK_OVERWRITE_BLOCK 0x0080
+#define MEMSTICK_OVERWRITE_UDST 0x10
+#define MEMSTICK_OVERWRITE_PGST1 0x20
+#define MEMSTICK_OVERWRITE_PGST0 0x40
+#define MEMSTICK_OVERWRITE_BKST 0x80
unsigned char management_flag;
-#define MEMSTICK_MANAGEMENT_SYSTEM 0x0004
-#define MEMSTICK_MANAGEMENT_TRANS_TABLE 0x0008
-#define MEMSTICK_MANAGEMENT_COPY 0x0010
-#define MEMSTICK_MANAGEMENT_ACCESS 0x0020
+#define MEMSTICK_MANAGEMENT_SYSFLG 0x04
+#define MEMSTICK_MANAGEMENT_ATFLG 0x08
+#define MEMSTICK_MANAGEMENT_SCMS1 0x10
+#define MEMSTICK_MANAGEMENT_SCMS0 0x20
unsigned short logical_address;
} __attribute__((packed));
struct mspro_param_register {
unsigned char system;
-#define MEMSTICK_SYS_SERIAL 0x80
#define MEMSTICK_SYS_PAR4 0x00
#define MEMSTICK_SYS_PAR8 0x40
+#define MEMSTICK_SYS_SERIAL 0x80
unsigned short data_count;
unsigned int data_address;
unsigned char w_length;
} __attribute__((packed));
-enum {
+enum memstick_tpc {
MS_TPC_READ_MG_STATUS = 0x01,
MS_TPC_READ_LONG_DATA = 0x02,
MS_TPC_READ_SHORT_DATA = 0x03,
MS_TPC_SET_CMD = 0x0e
};
-enum {
+enum memstick_command {
MS_CMD_BLOCK_END = 0x33,
MS_CMD_RESET = 0x3c,
MS_CMD_BLOCK_WRITE = 0x55,
/*** Driver structures and functions ***/
-#define MEMSTICK_PART_SHIFT 3
-
enum memstick_param { MEMSTICK_POWER = 1, MEMSTICK_INTERFACE };
#define MEMSTICK_POWER_OFF 0
struct memstick_host;
struct memstick_driver;
+struct memstick_device_id {
+ unsigned char match_flags;
#define MEMSTICK_MATCH_ALL 0x01
+ unsigned char type;
#define MEMSTICK_TYPE_LEGACY 0xff
#define MEMSTICK_TYPE_DUO 0x00
#define MEMSTICK_TYPE_PRO 0x01
+ unsigned char category;
#define MEMSTICK_CATEGORY_STORAGE 0xff
#define MEMSTICK_CATEGORY_STORAGE_DUO 0x00
+#define MEMSTICK_CATEGORY_IO 0x01
+#define MEMSTICK_CATEGORY_IO_PRO 0x10
-#define MEMSTICK_CLASS_GENERIC 0xff
-#define MEMSTICK_CLASS_GENERIC_DUO 0x00
-
-
-struct memstick_device_id {
- unsigned char match_flags;
- unsigned char type;
- unsigned char category;
unsigned char class;
+#define MEMSTICK_CLASS_FLASH 0xff
+#define MEMSTICK_CLASS_DUO 0x00
+#define MEMSTICK_CLASS_ROM 0x01
+#define MEMSTICK_CLASS_RO 0x02
+#define MEMSTICK_CLASS_WP 0x03
};
struct memstick_request {
void memstick_resume_host(struct memstick_host *host);
void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
- struct scatterlist *sg);
+ const struct scatterlist *sg);
void memstick_init_req(struct memstick_request *mrq, unsigned char tpc,
- void *buf, size_t length);
+ const void *buf, size_t length);
int memstick_next_req(struct memstick_host *host,
struct memstick_request **mrq);
void memstick_new_req(struct memstick_host *host);
MLX4_STAT_RATE_OFFSET = 5
};
+enum {
+ MLX4_MTT_FLAG_PRESENT = 1
+};
+
static inline u64 mlx4_fw_ver(u64 major, u64 minor, u64 subminor)
{
return (major << 32) | (minor << 16) | subminor;
*
* This function returns the next zone at or below a given zone index that is
* within the allowed nodemask using a cursor as the starting point for the
- * search. The zoneref returned is a cursor that is used as the next starting
- * point for future calls to next_zones_zonelist().
+ * search. The zoneref returned is a cursor that represents the current zone
+ * being examined. It should be advanced by one before calling
+ * next_zones_zonelist again.
*/
struct zoneref *next_zones_zonelist(struct zoneref *z,
enum zone_type highest_zoneidx,
*
* This function returns the first zone at or below a given zone index that is
* within the allowed nodemask. The zoneref returned is a cursor that can be
- * used to iterate the zonelist with next_zones_zonelist. The cursor should
- * not be used by the caller as it does not match the value of the zone
- * returned.
+ * used to iterate the zonelist with next_zones_zonelist by advancing it by
+ * one before calling.
*/
static inline struct zoneref *first_zones_zonelist(struct zonelist *zonelist,
enum zone_type highest_zoneidx,
#define for_each_zone_zonelist_nodemask(zone, z, zlist, highidx, nodemask) \
for (z = first_zones_zonelist(zlist, highidx, nodemask, &zone); \
zone; \
- z = next_zones_zonelist(z, highidx, nodemask, &zone)) \
+ z = next_zones_zonelist(++z, highidx, nodemask, &zone)) \
/**
* for_each_zone_zonelist - helper macro to iterate over valid zones in a zonelist at or below a given zone index
#ifdef __KERNEL__
#include <linux/in.h>
#endif
-#include <linux/pim.h>
/*
* Based on the MROUTING 3.5 defines primarily to keep
*/
#ifdef __KERNEL__
+#include <linux/pim.h>
#include <net/sock.h>
#ifdef CONFIG_IP_MROUTE
#ifdef __KERNEL__
+#include <linux/pim.h>
#include <linux/skbuff.h> /* for struct sk_buff_head */
#ifdef CONFIG_IPV6_MROUTE
#ifdef CONFIG_PCI_LEGACY
struct pci_dev __deprecated *pci_find_device(unsigned int vendor,
unsigned int device,
- const struct pci_dev *from);
+ struct pci_dev *from);
struct pci_dev __deprecated *pci_find_slot(unsigned int bus,
unsigned int devfn);
#endif /* CONFIG_PCI_LEGACY */
struct pci_dev *from);
struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device,
unsigned int ss_vendor, unsigned int ss_device,
- const struct pci_dev *from);
+ struct pci_dev *from);
struct pci_dev *pci_get_slot(struct pci_bus *bus, unsigned int devfn);
struct pci_dev *pci_get_bus_and_slot(unsigned int bus, unsigned int devfn);
struct pci_dev *pci_get_class(unsigned int class, struct pci_dev *from);
static inline struct pci_dev *pci_find_device(unsigned int vendor,
unsigned int device,
- const struct pci_dev *from)
+ struct pci_dev *from)
{
return NULL;
}
unsigned int device,
unsigned int ss_vendor,
unsigned int ss_device,
- const struct pci_dev *from)
+ struct pci_dev *from)
{
return NULL;
}
#include <asm/byteorder.h>
-#ifndef __KERNEL__
-struct pim {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- __u8 pim_type:4, /* PIM message type */
- pim_ver:4; /* PIM version */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- __u8 pim_ver:4; /* PIM version */
- pim_type:4; /* PIM message type */
-#endif
- __u8 pim_rsv; /* Reserved */
- __be16 pim_cksum; /* Checksum */
-};
-
-#define PIM_MINLEN 8
-#endif
-
/* Message types - V1 */
#define PIM_V1_VERSION __constant_htonl(0x10000000)
#define PIM_V1_REGISTER 1
#define PIM_VERSION 2
#define PIM_REGISTER 1
-#if defined(__KERNEL__)
#define PIM_NULL_REGISTER __constant_htonl(0x40000000)
/* PIMv2 register message header layout (ietf-draft-idmr-pimvsm-v2-00.ps */
struct sk_buff;
extern int pim_rcv_v1(struct sk_buff *);
#endif
-#endif
/*
* Resource Management
*/
+#ifdef CONFIG_PNP
struct resource *pnp_get_resource(struct pnp_dev *, unsigned int, unsigned int);
+#else
+static inline struct resource *pnp_get_resource(struct pnp_dev *dev, unsigned int type, unsigned int num)
+{
+ return NULL;
+}
+#endif
static inline int pnp_resource_valid(struct resource *res)
{
unsigned long quicklist_total_size(void);
+#else
+
+static inline unsigned long quicklist_total_size(void)
+{
+ return 0;
+}
+
#endif
#endif /* LINUX_QUICKLIST_H */
int flags, const char *dev_name, void *data, struct vfsmount *mnt);
#ifndef CONFIG_MMU
+extern int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize);
extern unsigned long ramfs_nommu_get_unmapped_area(struct file *file,
unsigned long addr,
unsigned long len,
int ret = -EBUSY;
spin_lock_irqsave(&cnt->lock, flags);
- if (cnt->usage < limit) {
+ if (cnt->usage <= limit) {
cnt->limit = limit;
ret = 0;
}
__put_task_struct(t);
}
+extern cputime_t task_utime(struct task_struct *p);
+extern cputime_t task_stime(struct task_struct *p);
+extern cputime_t task_gtime(struct task_struct *p);
+
/*
* Per process flags
*/
#include <linux/types.h>
#include <linux/magic.h>
+#ifdef __KERNEL__
#include <linux/time.h>
+#endif
enum smb_protocol {
SMB_PROTOCOL_NONE,
#ifndef __LINUX_STACKTRACE_H
#define __LINUX_STACKTRACE_H
+struct task_struct;
+
#ifdef CONFIG_STACKTRACE
struct stack_trace {
unsigned int nr_entries, max_entries;
unsigned long sc_flags;
struct list_head sc_dto_q; /* DTO tasklet I/O pending Q */
struct list_head sc_read_complete_q;
- spinlock_t sc_read_complete_lock;
struct work_struct sc_work;
};
/* sc_flags */
* tracehook_report_clone_complete(). This must prevent the child from
* self-reaping if tracehook_report_clone_complete() uses the @child
* pointer; otherwise it might have died and been released by the time
- * tracehook_report_report_clone_complete() is called.
+ * tracehook_report_clone_complete() is called.
*
* Called with no locks held, but the child cannot run until this returns.
*/
#define V4L2_PIX_FMT_SPCA508 v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */
#define V4L2_PIX_FMT_SPCA561 v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
#define V4L2_PIX_FMT_PAC207 v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
+#define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
+#define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */
/*
* F O R M A T E N U M E R A T I O N
int p9_error_init(void);
int p9_errstr2errno(char *, int);
int p9_trans_fd_init(void);
+void p9_trans_fd_exit(void);
#endif /* NET_9P_H */
#ifndef NET_9P_TRANSPORT_H
#define NET_9P_TRANSPORT_H
+#include <linux/module.h>
+
/**
* enum p9_trans_status - different states of underlying transports
* @Connected: transport is connected and healthy
int maxsize; /* max message size of transport */
int def; /* this transport should be default */
struct p9_trans * (*create)(const char *, char *, int, unsigned char);
+ struct module *owner;
};
void v9fs_register_trans(struct p9_trans_module *m);
-struct p9_trans_module *v9fs_match_trans(const substring_t *name);
-struct p9_trans_module *v9fs_default_trans(void);
+void v9fs_unregister_trans(struct p9_trans_module *m);
+struct p9_trans_module *v9fs_get_trans_by_name(const substring_t *name);
+struct p9_trans_module *v9fs_get_default_trans(void);
+void v9fs_put_trans(struct p9_trans_module *m);
#endif /* NET_9P_TRANSPORT_H */
void hci_conn_hash_flush(struct hci_dev *hdev);
void hci_conn_check_pending(struct hci_dev *hdev);
-struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *src);
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 auth_type);
+int hci_conn_check_link_mode(struct hci_conn *conn);
int hci_conn_auth(struct hci_conn *conn);
int hci_conn_encrypt(struct hci_conn *conn);
int hci_conn_change_link_key(struct hci_conn *conn);
extern void inet_twsk_deschedule(struct inet_timewait_sock *tw,
struct inet_timewait_death_row *twdr);
+extern void inet_twsk_purge(struct net *net, struct inet_hashinfo *hashinfo,
+ struct inet_timewait_death_row *twdr, int family);
+
static inline
struct net *twsk_net(const struct inet_timewait_sock *twsk)
{
*/
static inline int nla_ok(const struct nlattr *nla, int remaining)
{
- return remaining >= sizeof(*nla) &&
+ return remaining >= (int) sizeof(*nla) &&
nla->nla_len >= sizeof(*nla) &&
nla->nla_len <= remaining;
}
return qdisc_lock(root);
}
+static inline spinlock_t *qdisc_root_sleeping_lock(struct Qdisc *qdisc)
+{
+ struct Qdisc *root = qdisc_root_sleeping(qdisc);
+
+ ASSERT_RTNL();
+ return qdisc_lock(root);
+}
+
static inline struct net_device *qdisc_dev(struct Qdisc *qdisc)
{
return qdisc->dev_queue->dev;
static inline void sch_tree_lock(struct Qdisc *q)
{
- spin_lock_bh(qdisc_root_lock(q));
+ spin_lock_bh(qdisc_root_sleeping_lock(q));
}
static inline void sch_tree_unlock(struct Qdisc *q)
{
- spin_unlock_bh(qdisc_root_lock(q));
+ spin_unlock_bh(qdisc_root_sleeping_lock(q));
}
#define tcf_tree_lock(tp) sch_tree_lock((tp)->q)
const struct sctp_chunk *,
const __u8 *,
const size_t );
+struct sctp_chunk *sctp_make_violation_paramlen(const struct sctp_association *,
+ const struct sctp_chunk *,
+ struct sctp_paramhdr *);
struct sctp_chunk *sctp_make_heartbeat(const struct sctp_association *,
const struct sctp_transport *,
const void *payload,
__u8 scsi_lun[8];
};
+/*
+ * The Well Known LUNS (SAM-3) in our int representation of a LUN
+ */
+#define SCSI_W_LUN_BASE 0xc100
+#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1)
+#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2)
+#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3)
+
+static inline int scsi_is_wlun(unsigned int lun)
+{
+ return (lun & 0xff00) == SCSI_W_LUN_BASE;
+}
+
+
/*
* MESSAGE CODES
*/
int result;
if (initcall_debug) {
- print_fn_descriptor_symbol("calling %s\n", fn);
+ printk("calling %pF\n", fn);
t0 = ktime_get();
}
t1 = ktime_get();
delta = ktime_sub(t1, t0);
- print_fn_descriptor_symbol("initcall %s", fn);
- printk(" returned %d after %Ld msecs\n", result,
+ printk("initcall %pF returned %d after %Ld msecs\n",
+ fn, result,
(unsigned long long) delta.tv64 >> 20);
}
local_irq_enable();
}
if (msgbuf[0]) {
- print_fn_descriptor_symbol(KERN_WARNING "initcall %s", fn);
- printk(" returned with %s\n", msgbuf);
+ printk("initcall %pF returned with %s\n", fn, msgbuf);
}
return result;
static int audit_match_perm(struct audit_context *ctx, int mask)
{
+ unsigned n;
if (unlikely(!ctx))
return 0;
- unsigned n = ctx->major;
+ n = ctx->major;
switch (audit_classify_syscall(ctx->arch, n)) {
case 0: /* native */
if ((mask & AUDIT_PERM_WRITE) &&
*/
void cgroup_mm_owner_callbacks(struct task_struct *old, struct task_struct *new)
{
- struct cgroup *oldcgrp, *newcgrp;
+ struct cgroup *oldcgrp, *newcgrp = NULL;
if (need_mm_owner_callback) {
int i;
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
struct cgroup_subsys *ss = subsys[i];
oldcgrp = task_cgroup(old, ss->subsys_id);
- newcgrp = task_cgroup(new, ss->subsys_id);
+ if (new)
+ newcgrp = task_cgroup(new, ss->subsys_id);
if (oldcgrp == newcgrp)
continue;
if (ss->mm_owner_changed)
* 2003-10-22 Updates by Stephen Hemminger.
* 2004 May-July Rework by Paul Jackson.
* 2006 Rework by Paul Menage to use generic cgroups
+ * 2008 Rework of the scheduler domains and CPU hotplug handling
+ * by Max Krasnyansky
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of the Linux
static DEFINE_MUTEX(callback_mutex);
-/* This is ugly, but preserves the userspace API for existing cpuset
+/*
+ * This is ugly, but preserves the userspace API for existing cpuset
* users. If someone tries to mount the "cpuset" filesystem, we
- * silently switch it to mount "cgroup" instead */
+ * silently switch it to mount "cgroup" instead
+ */
static int cpuset_get_sb(struct file_system_type *fs_type,
int flags, const char *unused_dev_name,
void *data, struct vfsmount *mnt)
}
/*
- * Helper routine for rebuild_sched_domains().
+ * Helper routine for generate_sched_domains().
* Do cpusets a, b have overlapping cpus_allowed masks?
*/
-
static int cpusets_overlap(struct cpuset *a, struct cpuset *b)
{
return cpus_intersects(a->cpus_allowed, b->cpus_allowed);
}
/*
- * rebuild_sched_domains()
- *
- * This routine will be called to rebuild the scheduler's dynamic
- * sched domains:
- * - if the flag 'sched_load_balance' of any cpuset with non-empty
- * 'cpus' changes,
- * - or if the 'cpus' allowed changes in any cpuset which has that
- * flag enabled,
- * - or if the 'sched_relax_domain_level' of any cpuset which has
- * that flag enabled and with non-empty 'cpus' changes,
- * - or if any cpuset with non-empty 'cpus' is removed,
- * - or if a cpu gets offlined.
- *
- * This routine builds a partial partition of the systems CPUs
- * (the set of non-overlappping cpumask_t's in the array 'part'
- * below), and passes that partial partition to the kernel/sched.c
- * partition_sched_domains() routine, which will rebuild the
- * schedulers load balancing domains (sched domains) as specified
- * by that partial partition. A 'partial partition' is a set of
- * non-overlapping subsets whose union is a subset of that set.
+ * generate_sched_domains()
+ *
+ * This function builds a partial partition of the systems CPUs
+ * A 'partial partition' is a set of non-overlapping subsets whose
+ * union is a subset of that set.
+ * The output of this function needs to be passed to kernel/sched.c
+ * partition_sched_domains() routine, which will rebuild the scheduler's
+ * load balancing domains (sched domains) as specified by that partial
+ * partition.
*
* See "What is sched_load_balance" in Documentation/cpusets.txt
* for a background explanation of this.
* domains when operating in the severe memory shortage situations
* that could cause allocation failures below.
*
- * Call with cgroup_mutex held. May take callback_mutex during
- * call due to the kfifo_alloc() and kmalloc() calls. May nest
- * a call to the get_online_cpus()/put_online_cpus() pair.
- * Must not be called holding callback_mutex, because we must not
- * call get_online_cpus() while holding callback_mutex. Elsewhere
- * the kernel nests callback_mutex inside get_online_cpus() calls.
- * So the reverse nesting would risk an ABBA deadlock.
+ * Must be called with cgroup_lock held.
*
* The three key local variables below are:
* q - a linked-list queue of cpuset pointers, used to implement a
* element of the partition (one sched domain) to be passed to
* partition_sched_domains().
*/
-
-void rebuild_sched_domains(void)
+static int generate_sched_domains(cpumask_t **domains,
+ struct sched_domain_attr **attributes)
{
- LIST_HEAD(q); /* queue of cpusets to be scanned*/
+ LIST_HEAD(q); /* queue of cpusets to be scanned */
struct cpuset *cp; /* scans q */
struct cpuset **csa; /* array of all cpuset ptrs */
int csn; /* how many cpuset ptrs in csa so far */
int ndoms; /* number of sched domains in result */
int nslot; /* next empty doms[] cpumask_t slot */
- csa = NULL;
+ ndoms = 0;
doms = NULL;
dattr = NULL;
+ csa = NULL;
/* Special case for the 99% of systems with one, full, sched domain */
if (is_sched_load_balance(&top_cpuset)) {
- ndoms = 1;
doms = kmalloc(sizeof(cpumask_t), GFP_KERNEL);
if (!doms)
- goto rebuild;
+ goto done;
+
dattr = kmalloc(sizeof(struct sched_domain_attr), GFP_KERNEL);
if (dattr) {
*dattr = SD_ATTR_INIT;
update_domain_attr_tree(dattr, &top_cpuset);
}
*doms = top_cpuset.cpus_allowed;
- goto rebuild;
+
+ ndoms = 1;
+ goto done;
}
csa = kmalloc(number_of_cpusets * sizeof(cp), GFP_KERNEL);
}
}
- /* Convert <csn, csa> to <ndoms, doms> */
+ /*
+ * Now we know how many domains to create.
+ * Convert <csn, csa> to <ndoms, doms> and populate cpu masks.
+ */
doms = kmalloc(ndoms * sizeof(cpumask_t), GFP_KERNEL);
- if (!doms)
- goto rebuild;
+ if (!doms) {
+ ndoms = 0;
+ goto done;
+ }
+
+ /*
+ * The rest of the code, including the scheduler, can deal with
+ * dattr==NULL case. No need to abort if alloc fails.
+ */
dattr = kmalloc(ndoms * sizeof(struct sched_domain_attr), GFP_KERNEL);
for (nslot = 0, i = 0; i < csn; i++) {
struct cpuset *a = csa[i];
+ cpumask_t *dp;
int apn = a->pn;
- if (apn >= 0) {
- cpumask_t *dp = doms + nslot;
-
- if (nslot == ndoms) {
- static int warnings = 10;
- if (warnings) {
- printk(KERN_WARNING
- "rebuild_sched_domains confused:"
- " nslot %d, ndoms %d, csn %d, i %d,"
- " apn %d\n",
- nslot, ndoms, csn, i, apn);
- warnings--;
- }
- continue;
+ if (apn < 0) {
+ /* Skip completed partitions */
+ continue;
+ }
+
+ dp = doms + nslot;
+
+ if (nslot == ndoms) {
+ static int warnings = 10;
+ if (warnings) {
+ printk(KERN_WARNING
+ "rebuild_sched_domains confused:"
+ " nslot %d, ndoms %d, csn %d, i %d,"
+ " apn %d\n",
+ nslot, ndoms, csn, i, apn);
+ warnings--;
}
+ continue;
+ }
- cpus_clear(*dp);
- if (dattr)
- *(dattr + nslot) = SD_ATTR_INIT;
- for (j = i; j < csn; j++) {
- struct cpuset *b = csa[j];
-
- if (apn == b->pn) {
- cpus_or(*dp, *dp, b->cpus_allowed);
- b->pn = -1;
- if (dattr)
- update_domain_attr_tree(dattr
- + nslot, b);
- }
+ cpus_clear(*dp);
+ if (dattr)
+ *(dattr + nslot) = SD_ATTR_INIT;
+ for (j = i; j < csn; j++) {
+ struct cpuset *b = csa[j];
+
+ if (apn == b->pn) {
+ cpus_or(*dp, *dp, b->cpus_allowed);
+ if (dattr)
+ update_domain_attr_tree(dattr + nslot, b);
+
+ /* Done with this partition */
+ b->pn = -1;
}
- nslot++;
}
+ nslot++;
}
BUG_ON(nslot != ndoms);
-rebuild:
- /* Have scheduler rebuild sched domains */
+done:
+ kfree(csa);
+
+ *domains = doms;
+ *attributes = dattr;
+ return ndoms;
+}
+
+/*
+ * Rebuild scheduler domains.
+ *
+ * Call with neither cgroup_mutex held nor within get_online_cpus().
+ * Takes both cgroup_mutex and get_online_cpus().
+ *
+ * Cannot be directly called from cpuset code handling changes
+ * to the cpuset pseudo-filesystem, because it cannot be called
+ * from code that already holds cgroup_mutex.
+ */
+static void do_rebuild_sched_domains(struct work_struct *unused)
+{
+ struct sched_domain_attr *attr;
+ cpumask_t *doms;
+ int ndoms;
+
get_online_cpus();
- partition_sched_domains(ndoms, doms, dattr);
+
+ /* Generate domain masks and attrs */
+ cgroup_lock();
+ ndoms = generate_sched_domains(&doms, &attr);
+ cgroup_unlock();
+
+ /* Have scheduler rebuild the domains */
+ partition_sched_domains(ndoms, doms, attr);
+
put_online_cpus();
+}
-done:
- kfree(csa);
- /* Don't kfree(doms) -- partition_sched_domains() does that. */
- /* Don't kfree(dattr) -- partition_sched_domains() does that. */
+static DECLARE_WORK(rebuild_sched_domains_work, do_rebuild_sched_domains);
+
+/*
+ * Rebuild scheduler domains, asynchronously via workqueue.
+ *
+ * If the flag 'sched_load_balance' of any cpuset with non-empty
+ * 'cpus' changes, or if the 'cpus' allowed changes in any cpuset
+ * which has that flag enabled, or if any cpuset with a non-empty
+ * 'cpus' is removed, then call this routine to rebuild the
+ * scheduler's dynamic sched domains.
+ *
+ * The rebuild_sched_domains() and partition_sched_domains()
+ * routines must nest cgroup_lock() inside get_online_cpus(),
+ * but such cpuset changes as these must nest that locking the
+ * other way, holding cgroup_lock() for much of the code.
+ *
+ * So in order to avoid an ABBA deadlock, the cpuset code handling
+ * these user changes delegates the actual sched domain rebuilding
+ * to a separate workqueue thread, which ends up processing the
+ * above do_rebuild_sched_domains() function.
+ */
+static void async_rebuild_sched_domains(void)
+{
+ schedule_work(&rebuild_sched_domains_work);
+}
+
+/*
+ * Accomplishes the same scheduler domain rebuild as the above
+ * async_rebuild_sched_domains(), however it directly calls the
+ * rebuild routine synchronously rather than calling it via an
+ * asynchronous work thread.
+ *
+ * This can only be called from code that is not holding
+ * cgroup_mutex (not nested in a cgroup_lock() call.)
+ */
+void rebuild_sched_domains(void)
+{
+ do_rebuild_sched_domains(NULL);
}
/**
/**
* update_tasks_cpumask - Update the cpumasks of tasks in the cpuset.
* @cs: the cpuset in which each task's cpus_allowed mask needs to be changed
+ * @heap: if NULL, defer allocating heap memory to cgroup_scan_tasks()
*
* Called with cgroup_mutex held
*
* The cgroup_scan_tasks() function will scan all the tasks in a cgroup,
* calling callback functions for each.
*
- * Return 0 if successful, -errno if not.
+ * No return value. It's guaranteed that cgroup_scan_tasks() always returns 0
+ * if @heap != NULL.
*/
-static int update_tasks_cpumask(struct cpuset *cs)
+static void update_tasks_cpumask(struct cpuset *cs, struct ptr_heap *heap)
{
struct cgroup_scanner scan;
- struct ptr_heap heap;
- int retval;
-
- /*
- * cgroup_scan_tasks() will initialize heap->gt for us.
- * heap_init() is still needed here for we should not change
- * cs->cpus_allowed when heap_init() fails.
- */
- retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
- if (retval)
- return retval;
scan.cg = cs->css.cgroup;
scan.test_task = cpuset_test_cpumask;
scan.process_task = cpuset_change_cpumask;
- scan.heap = &heap;
- retval = cgroup_scan_tasks(&scan);
-
- heap_free(&heap);
- return retval;
+ scan.heap = heap;
+ cgroup_scan_tasks(&scan);
}
/**
*/
static int update_cpumask(struct cpuset *cs, const char *buf)
{
+ struct ptr_heap heap;
struct cpuset trialcs;
int retval;
int is_load_balanced;
if (cpus_equal(cs->cpus_allowed, trialcs.cpus_allowed))
return 0;
+ retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
+ if (retval)
+ return retval;
+
is_load_balanced = is_sched_load_balance(&trialcs);
mutex_lock(&callback_mutex);
* Scan tasks in the cpuset, and update the cpumasks of any
* that need an update.
*/
- retval = update_tasks_cpumask(cs);
- if (retval < 0)
- return retval;
+ update_tasks_cpumask(cs, &heap);
+
+ heap_free(&heap);
if (is_load_balanced)
- rebuild_sched_domains();
+ async_rebuild_sched_domains();
return 0;
}
if (val != cs->relax_domain_level) {
cs->relax_domain_level = val;
if (!cpus_empty(cs->cpus_allowed) && is_sched_load_balance(cs))
- rebuild_sched_domains();
+ async_rebuild_sched_domains();
}
return 0;
mutex_unlock(&callback_mutex);
if (cpus_nonempty && balance_flag_changed)
- rebuild_sched_domains();
+ async_rebuild_sched_domains();
return 0;
}
default:
BUG();
}
+
+ /* Unreachable but makes gcc happy */
+ return 0;
}
static s64 cpuset_read_s64(struct cgroup *cont, struct cftype *cft)
default:
BUG();
}
+
+ /* Unrechable but makes gcc happy */
+ return 0;
}
}
/*
- * Locking note on the strange update_flag() call below:
- *
* If the cpuset being removed has its flag 'sched_load_balance'
* enabled, then simulate turning sched_load_balance off, which
- * will call rebuild_sched_domains(). The get_online_cpus()
- * call in rebuild_sched_domains() must not be made while holding
- * callback_mutex. Elsewhere the kernel nests callback_mutex inside
- * get_online_cpus() calls. So the reverse nesting would risk an
- * ABBA deadlock.
+ * will call async_rebuild_sched_domains().
*/
static void cpuset_destroy(struct cgroup_subsys *ss, struct cgroup *cont)
struct cgroup_subsys cpuset_subsys = {
.name = "cpuset",
.create = cpuset_create,
- .destroy = cpuset_destroy,
+ .destroy = cpuset_destroy,
.can_attach = cpuset_can_attach,
.attach = cpuset_attach,
.populate = cpuset_populate,
}
/*
- * If common_cpu_mem_hotplug_unplug(), below, unplugs any CPUs
+ * If CPU and/or memory hotplug handlers, below, unplug any CPUs
* or memory nodes, we need to walk over the cpuset hierarchy,
* removing that CPU or node from all cpusets. If this removes the
* last CPU or node from a cpuset, then move the tasks in the empty
nodes_empty(cp->mems_allowed))
remove_tasks_in_empty_cpuset(cp);
else {
- update_tasks_cpumask(cp);
+ update_tasks_cpumask(cp, NULL);
update_tasks_nodemask(cp, &oldmems);
}
}
}
-/*
- * The cpus_allowed and mems_allowed nodemasks in the top_cpuset track
- * cpu_online_map and node_states[N_HIGH_MEMORY]. Force the top cpuset to
- * track what's online after any CPU or memory node hotplug or unplug event.
- *
- * Since there are two callers of this routine, one for CPU hotplug
- * events and one for memory node hotplug events, we could have coded
- * two separate routines here. We code it as a single common routine
- * in order to minimize text size.
- */
-
-static void common_cpu_mem_hotplug_unplug(int rebuild_sd)
-{
- cgroup_lock();
-
- top_cpuset.cpus_allowed = cpu_online_map;
- top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
- scan_for_empty_cpusets(&top_cpuset);
-
- /*
- * Scheduler destroys domains on hotplug events.
- * Rebuild them based on the current settings.
- */
- if (rebuild_sd)
- rebuild_sched_domains();
-
- cgroup_unlock();
-}
-
/*
* The top_cpuset tracks what CPUs and Memory Nodes are online,
* period. This is necessary in order to make cpusets transparent
*
* This routine ensures that top_cpuset.cpus_allowed tracks
* cpu_online_map on each CPU hotplug (cpuhp) event.
+ *
+ * Called within get_online_cpus(). Needs to call cgroup_lock()
+ * before calling generate_sched_domains().
*/
-
-static int cpuset_handle_cpuhp(struct notifier_block *unused_nb,
+static int cpuset_track_online_cpus(struct notifier_block *unused_nb,
unsigned long phase, void *unused_cpu)
{
+ struct sched_domain_attr *attr;
+ cpumask_t *doms;
+ int ndoms;
+
switch (phase) {
- case CPU_UP_CANCELED:
- case CPU_UP_CANCELED_FROZEN:
- case CPU_DOWN_FAILED:
- case CPU_DOWN_FAILED_FROZEN:
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
case CPU_DEAD:
case CPU_DEAD_FROZEN:
- common_cpu_mem_hotplug_unplug(1);
break;
+
default:
return NOTIFY_DONE;
}
+ cgroup_lock();
+ top_cpuset.cpus_allowed = cpu_online_map;
+ scan_for_empty_cpusets(&top_cpuset);
+ ndoms = generate_sched_domains(&doms, &attr);
+ cgroup_unlock();
+
+ /* Have scheduler rebuild the domains */
+ partition_sched_domains(ndoms, doms, attr);
+
return NOTIFY_OK;
}
#ifdef CONFIG_MEMORY_HOTPLUG
/*
* Keep top_cpuset.mems_allowed tracking node_states[N_HIGH_MEMORY].
- * Call this routine anytime after you change
- * node_states[N_HIGH_MEMORY].
- * See also the previous routine cpuset_handle_cpuhp().
+ * Call this routine anytime after node_states[N_HIGH_MEMORY] changes.
+ * See also the previous routine cpuset_track_online_cpus().
*/
-
void cpuset_track_online_nodes(void)
{
- common_cpu_mem_hotplug_unplug(0);
+ cgroup_lock();
+ top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
+ scan_for_empty_cpusets(&top_cpuset);
+ cgroup_unlock();
}
#endif
top_cpuset.cpus_allowed = cpu_online_map;
top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
- hotcpu_notifier(cpuset_handle_cpuhp, 0);
+ hotcpu_notifier(cpuset_track_online_cpus, 0);
}
/**
* We won't ever get here for the group leader, since it
* will have been the last reference on the signal_struct.
*/
- sig->utime = cputime_add(sig->utime, tsk->utime);
- sig->stime = cputime_add(sig->stime, tsk->stime);
- sig->gtime = cputime_add(sig->gtime, tsk->gtime);
+ sig->utime = cputime_add(sig->utime, task_utime(tsk));
+ sig->stime = cputime_add(sig->stime, task_stime(tsk));
+ sig->gtime = cputime_add(sig->gtime, task_gtime(tsk));
sig->min_flt += tsk->min_flt;
sig->maj_flt += tsk->maj_flt;
sig->nvcsw += tsk->nvcsw;
* If there are other users of the mm and the owner (us) is exiting
* we need to find a new owner to take on the responsibility.
*/
- if (!mm)
- return 0;
if (atomic_read(&mm->mm_users) <= 1)
return 0;
if (mm->owner != p)
} while_each_thread(g, c);
read_unlock(&tasklist_lock);
+ /*
+ * We found no owner yet mm_users > 1: this implies that we are
+ * most likely racing with swapoff (try_to_unuse()) or /proc or
+ * ptrace or page migration (get_task_mm()). Mark owner as NULL,
+ * so that subsystems can understand the callback and take action.
+ */
+ down_write(&mm->mmap_sem);
+ cgroup_mm_owner_callbacks(mm->owner, NULL);
+ mm->owner = NULL;
+ up_write(&mm->mmap_sem);
return;
assign_new_owner:
* the child reaper process (ie "init") in our pid
* space.
*/
+static struct task_struct *find_new_reaper(struct task_struct *father)
+{
+ struct pid_namespace *pid_ns = task_active_pid_ns(father);
+ struct task_struct *thread;
+
+ thread = father;
+ while_each_thread(father, thread) {
+ if (thread->flags & PF_EXITING)
+ continue;
+ if (unlikely(pid_ns->child_reaper == father))
+ pid_ns->child_reaper = thread;
+ return thread;
+ }
+
+ if (unlikely(pid_ns->child_reaper == father)) {
+ write_unlock_irq(&tasklist_lock);
+ if (unlikely(pid_ns == &init_pid_ns))
+ panic("Attempted to kill init!");
+
+ zap_pid_ns_processes(pid_ns);
+ write_lock_irq(&tasklist_lock);
+ /*
+ * We can not clear ->child_reaper or leave it alone.
+ * There may by stealth EXIT_DEAD tasks on ->children,
+ * forget_original_parent() must move them somewhere.
+ */
+ pid_ns->child_reaper = init_pid_ns.child_reaper;
+ }
+
+ return pid_ns->child_reaper;
+}
+
static void forget_original_parent(struct task_struct *father)
{
- struct task_struct *p, *n, *reaper = father;
+ struct task_struct *p, *n, *reaper;
LIST_HEAD(ptrace_dead);
write_lock_irq(&tasklist_lock);
-
+ reaper = find_new_reaper(father);
/*
* First clean up ptrace if we were using it.
*/
ptrace_exit(father, &ptrace_dead);
- do {
- reaper = next_thread(reaper);
- if (reaper == father) {
- reaper = task_child_reaper(father);
- break;
- }
- } while (reaper->flags & PF_EXITING);
-
list_for_each_entry_safe(p, n, &father->children, sibling) {
p->real_parent = reaper;
if (p->parent == father) {
/* mt-exec, de_thread() is waiting for us */
if (thread_group_leader(tsk) &&
- tsk->signal->notify_count < 0 &&
- tsk->signal->group_exit_task)
+ tsk->signal->group_exit_task &&
+ tsk->signal->notify_count < 0)
wake_up_process(tsk->signal->group_exit_task);
write_unlock_irq(&tasklist_lock);
static inline void check_stack_usage(void) {}
#endif
-static inline void exit_child_reaper(struct task_struct *tsk)
-{
- if (likely(tsk->group_leader != task_child_reaper(tsk)))
- return;
-
- if (tsk->nsproxy->pid_ns == &init_pid_ns)
- panic("Attempted to kill init!");
-
- /*
- * @tsk is the last thread in the 'cgroup-init' and is exiting.
- * Terminate all remaining processes in the namespace and reap them
- * before exiting @tsk.
- *
- * Note that @tsk (last thread of cgroup-init) may not necessarily
- * be the child-reaper (i.e main thread of cgroup-init) of the
- * namespace i.e the child_reaper may have already exited.
- *
- * Even after a child_reaper exits, we let it inherit orphaned children,
- * because, pid_ns->child_reaper remains valid as long as there is
- * at least one living sub-thread in the cgroup init.
-
- * This living sub-thread of the cgroup-init will be notified when
- * a child inherited by the 'child-reaper' exits (do_notify_parent()
- * uses __group_send_sig_info()). Further, when reaping child processes,
- * do_wait() iterates over children of all living sub threads.
-
- * i.e even though 'child_reaper' thread is listed as the parent of the
- * orphaned children, any living sub-thread in the cgroup-init can
- * perform the role of the child_reaper.
- */
- zap_pid_ns_processes(tsk->nsproxy->pid_ns);
-}
-
NORET_TYPE void do_exit(long code)
{
struct task_struct *tsk = current;
}
group_dead = atomic_dec_and_test(&tsk->signal->live);
if (group_dead) {
- exit_child_reaper(tsk);
hrtimer_cancel(&tsk->signal->real_timer);
exit_itimers(tsk->signal);
}
*/
BUG_ON(timer->function(timer) != HRTIMER_NORESTART);
return 1;
- case HRTIMER_CB_IRQSAFE_NO_SOFTIRQ:
+ case HRTIMER_CB_IRQSAFE_PERCPU:
+ case HRTIMER_CB_IRQSAFE_UNLOCKED:
/*
* This is solely for the sched tick emulation with
* dynamic tick support to ensure that we do not
* restart the tick right on the edge and end up with
* the tick timer in the softirq ! The calling site
- * takes care of this.
+ * takes care of this. Also used for hrtimer sleeper !
*/
debug_hrtimer_deactivate(timer);
return 1;
timer_stats_account_hrtimer(timer);
fn = timer->function;
- if (timer->cb_mode == HRTIMER_CB_IRQSAFE_NO_SOFTIRQ) {
+ if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU ||
+ timer->cb_mode == HRTIMER_CB_IRQSAFE_UNLOCKED) {
/*
* Used for scheduler timers, avoid lock inversion with
* rq->lock and tasklist_lock.
sl->timer.function = hrtimer_wakeup;
sl->task = task;
#ifdef CONFIG_HIGH_RES_TIMERS
- sl->timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ;
+ sl->timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED;
#endif
}
#ifdef CONFIG_HOTPLUG_CPU
-static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
- struct hrtimer_clock_base *new_base)
+static int migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
+ struct hrtimer_clock_base *new_base, int dcpu)
{
struct hrtimer *timer;
struct rb_node *node;
+ int raise = 0;
while ((node = rb_first(&old_base->active))) {
timer = rb_entry(node, struct hrtimer, node);
BUG_ON(hrtimer_callback_running(timer));
debug_hrtimer_deactivate(timer);
- __remove_hrtimer(timer, old_base, HRTIMER_STATE_INACTIVE, 0);
+
+ /*
+ * Should not happen. Per CPU timers should be
+ * canceled _before_ the migration code is called
+ */
+ if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU) {
+ __remove_hrtimer(timer, old_base,
+ HRTIMER_STATE_INACTIVE, 0);
+ WARN(1, "hrtimer (%p %p)active but cpu %d dead\n",
+ timer, timer->function, dcpu);
+ continue;
+ }
+
+ /*
+ * Mark it as STATE_MIGRATE not INACTIVE otherwise the
+ * timer could be seen as !active and just vanish away
+ * under us on another CPU
+ */
+ __remove_hrtimer(timer, old_base, HRTIMER_STATE_MIGRATE, 0);
timer->base = new_base;
/*
* Enqueue the timer. Allow reprogramming of the event device
*/
enqueue_hrtimer(timer, new_base, 1);
+
+#ifdef CONFIG_HIGH_RES_TIMERS
+ /*
+ * Happens with high res enabled when the timer was
+ * already expired and the callback mode is
+ * HRTIMER_CB_IRQSAFE_UNLOCKED (hrtimer_sleeper). The
+ * enqueue code does not move them to the soft irq
+ * pending list for performance/latency reasons, but
+ * in the migration state, we need to do that
+ * otherwise we end up with a stale timer.
+ */
+ if (timer->state == HRTIMER_STATE_MIGRATE) {
+ timer->state = HRTIMER_STATE_PENDING;
+ list_add_tail(&timer->cb_entry,
+ &new_base->cpu_base->cb_pending);
+ raise = 1;
+ }
+#endif
+ /* Clear the migration state bit */
+ timer->state &= ~HRTIMER_STATE_MIGRATE;
+ }
+ return raise;
+}
+
+#ifdef CONFIG_HIGH_RES_TIMERS
+static int migrate_hrtimer_pending(struct hrtimer_cpu_base *old_base,
+ struct hrtimer_cpu_base *new_base)
+{
+ struct hrtimer *timer;
+ int raise = 0;
+
+ while (!list_empty(&old_base->cb_pending)) {
+ timer = list_entry(old_base->cb_pending.next,
+ struct hrtimer, cb_entry);
+
+ __remove_hrtimer(timer, timer->base, HRTIMER_STATE_PENDING, 0);
+ timer->base = &new_base->clock_base[timer->base->index];
+ list_add_tail(&timer->cb_entry, &new_base->cb_pending);
+ raise = 1;
}
+ return raise;
+}
+#else
+static int migrate_hrtimer_pending(struct hrtimer_cpu_base *old_base,
+ struct hrtimer_cpu_base *new_base)
+{
+ return 0;
}
+#endif
static void migrate_hrtimers(int cpu)
{
struct hrtimer_cpu_base *old_base, *new_base;
- int i;
+ int i, raise = 0;
BUG_ON(cpu_online(cpu));
old_base = &per_cpu(hrtimer_bases, cpu);
spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING);
for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
- migrate_hrtimer_list(&old_base->clock_base[i],
- &new_base->clock_base[i]);
+ if (migrate_hrtimer_list(&old_base->clock_base[i],
+ &new_base->clock_base[i], cpu))
+ raise = 1;
}
+ if (migrate_hrtimer_pending(old_base, new_base))
+ raise = 1;
+
spin_unlock(&old_base->lock);
spin_unlock(&new_base->lock);
local_irq_enable();
put_cpu_var(hrtimer_bases);
+
+ if (raise)
+ hrtimer_raise_softirq();
}
#endif /* CONFIG_HOTPLUG_CPU */
*old = addr | (*old & ~PAGE_MASK);
/* The old page I have found cannot be a
- * destination page, so return it.
+ * destination page, so return it if it's
+ * gfp_flags honor the ones passed in.
*/
+ if (!(gfp_mask & __GFP_HIGHMEM) &&
+ PageHighMem(old_page)) {
+ kimage_free_pages(old_page);
+ continue;
+ }
addr = old_addr;
page = old_page;
break;
if (err)
return err;
if (CACHE_FLUSH_IS_SAFE)
- flush_icache_range(addr, addr + length + 1);
+ flush_icache_range(addr, addr + length);
return 0;
}
* Get the passive CPU lock which will hold all the non-primary
* CPU in a spin state while the debugger is active
*/
- if (!kgdb_single_step || !kgdb_contthread) {
+ if (!kgdb_single_step) {
for (i = 0; i < NR_CPUS; i++)
atomic_set(&passive_cpu_wait[i], 1);
}
#ifdef CONFIG_SMP
/* Signal the other CPUs to enter kgdb_wait() */
- if ((!kgdb_single_step || !kgdb_contthread) && kgdb_do_roundup)
+ if ((!kgdb_single_step) && kgdb_do_roundup)
kgdb_roundup_cpus(flags);
#endif
kgdb_post_primary_code(ks->linux_regs, ks->ex_vector, ks->err_code);
kgdb_deactivate_sw_breakpoints();
kgdb_single_step = 0;
- kgdb_contthread = NULL;
+ kgdb_contthread = current;
exception_level = 0;
/* Talk to debugger with gdbserial protocol */
kgdb_info[ks->cpu].task = NULL;
atomic_set(&cpu_in_kgdb[ks->cpu], 0);
- if (!kgdb_single_step || !kgdb_contthread) {
+ if (!kgdb_single_step) {
for (i = NR_CPUS-1; i >= 0; i--)
atomic_set(&passive_cpu_wait[i], 0);
/*
if (!entry)
return 0;
- entry->class = this;
- entry->distance = distance;
if (!save_trace(&entry->trace))
return 0;
+ entry->class = this;
+ entry->distance = distance;
/*
* Since we never remove from the dependency list, the list can
* be walked lockless by other CPUs, it's only allocation
stats = get_lock_stats(hlock_class(hlock));
if (point < ARRAY_SIZE(stats->contention_point))
- stats->contention_point[i]++;
+ stats->contention_point[point]++;
if (lock->cpu != smp_processor_id())
stats->bounces[bounce_contended + !!hlock->read]++;
put_lock_stats(stats);
{
unsigned long rem;
+ nr += 5; /* for display rounding */
rem = do_div(nr, 1000); /* XXX: do_div_signed */
- snprintf(buf, bufsiz, "%lld.%02d", (long long)nr, ((int)rem+5)/10);
+ snprintf(buf, bufsiz, "%lld.%02d", (long long)nr, (int)rem/10);
}
static void seq_time(struct seq_file *m, s64 time)
rc = sys_wait4(-1, NULL, __WALL, NULL);
} while (rc != -ECHILD);
-
- /* Child reaper for the pid namespace is going away */
- pid_ns->child_reaper = NULL;
acct_exit_ns(pid_ns);
return;
}
#include <linux/uaccess.h>
/*
- * locking rule: all changes to target_value or requirements or notifiers lists
+ * locking rule: all changes to requirements or notifiers lists
* or pm_qos_object list and pm_qos_objects need to happen with pm_qos_lock
* held, taken with _irqsave. One lock to rule them all
*/
struct miscdevice pm_qos_power_miscdev;
char *name;
s32 default_value;
- s32 target_value;
+ atomic_t target_value;
s32 (*comparitor)(s32, s32);
};
.notifiers = &cpu_dma_lat_notifier,
.name = "cpu_dma_latency",
.default_value = 2000 * USEC_PER_SEC,
- .target_value = 2000 * USEC_PER_SEC,
+ .target_value = ATOMIC_INIT(2000 * USEC_PER_SEC),
.comparitor = min_compare
};
.notifiers = &network_lat_notifier,
.name = "network_latency",
.default_value = 2000 * USEC_PER_SEC,
- .target_value = 2000 * USEC_PER_SEC,
+ .target_value = ATOMIC_INIT(2000 * USEC_PER_SEC),
.comparitor = min_compare
};
.notifiers = &network_throughput_notifier,
.name = "network_throughput",
.default_value = 0,
- .target_value = 0,
+ .target_value = ATOMIC_INIT(0),
.comparitor = max_compare
};
extreme_value = pm_qos_array[target]->comparitor(
extreme_value, node->value);
}
- if (pm_qos_array[target]->target_value != extreme_value) {
+ if (atomic_read(&pm_qos_array[target]->target_value) != extreme_value) {
call_notifier = 1;
- pm_qos_array[target]->target_value = extreme_value;
+ atomic_set(&pm_qos_array[target]->target_value, extreme_value);
pr_debug(KERN_ERR "new target for qos %d is %d\n", target,
- pm_qos_array[target]->target_value);
+ atomic_read(&pm_qos_array[target]->target_value));
}
spin_unlock_irqrestore(&pm_qos_lock, flags);
*/
int pm_qos_requirement(int pm_qos_class)
{
- int ret_val;
- unsigned long flags;
-
- spin_lock_irqsave(&pm_qos_lock, flags);
- ret_val = pm_qos_array[pm_qos_class]->target_value;
- spin_unlock_irqrestore(&pm_qos_lock, flags);
-
- return ret_val;
+ return atomic_read(&pm_qos_array[pm_qos_class]->target_value);
}
EXPORT_SYMBOL_GPL(pm_qos_requirement);
return tmr;
if (unlikely(!(tmr->sigq = sigqueue_alloc()))) {
kmem_cache_free(posix_timers_cache, tmr);
- tmr = NULL;
+ return NULL;
}
memset(&tmr->sigq->info, 0, sizeof(siginfo_t));
return tmr;
#include <linux/console.h>
#include <linux/cpu.h>
#include <linux/freezer.h>
+#include <linux/ftrace.h>
#include "power.h"
int hibernation_snapshot(int platform_mode)
{
- int error;
+ int error, ftrace_save;
/* Free memory before shutting down devices. */
error = swsusp_shrink_memory();
goto Close;
suspend_console();
+ ftrace_save = __ftrace_enabled_save();
error = device_suspend(PMSG_FREEZE);
if (error)
goto Recover_platform;
Resume_devices:
device_resume(in_suspend ?
(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
+ __ftrace_enabled_restore(ftrace_save);
resume_console();
Close:
platform_end(platform_mode);
int hibernation_restore(int platform_mode)
{
- int error;
+ int error, ftrace_save;
pm_prepare_console();
suspend_console();
+ ftrace_save = __ftrace_enabled_save();
error = device_suspend(PMSG_QUIESCE);
if (error)
goto Finish;
platform_restore_cleanup(platform_mode);
device_resume(PMSG_RECOVER);
Finish:
+ __ftrace_enabled_restore(ftrace_save);
resume_console();
pm_restore_console();
return error;
int hibernation_platform_enter(void)
{
- int error;
+ int error, ftrace_save;
if (!hibernation_ops)
return -ENOSYS;
goto Close;
suspend_console();
+ ftrace_save = __ftrace_enabled_save();
error = device_suspend(PMSG_HIBERNATE);
if (error) {
if (hibernation_ops->recover)
hibernation_ops->finish();
Resume_devices:
device_resume(PMSG_RESTORE);
+ __ftrace_enabled_restore(ftrace_save);
resume_console();
Close:
hibernation_ops->end();
EXPORT_SYMBOL(allocate_resource);
-/**
- * insert_resource - Inserts a resource in the resource tree
- * @parent: parent of the new resource
- * @new: new resource to insert
- *
- * Returns 0 on success, -EBUSY if the resource can't be inserted.
- *
- * This function is equivalent to request_resource when no conflict
- * happens. If a conflict happens, and the conflicting resources
- * entirely fit within the range of the new resource, then the new
- * resource is inserted and the conflicting resources become children of
- * the new resource.
+/*
+ * Insert a resource into the resource tree. If successful, return NULL,
+ * otherwise return the conflicting resource (compare to __request_resource())
*/
-int insert_resource(struct resource *parent, struct resource *new)
+static struct resource * __insert_resource(struct resource *parent, struct resource *new)
{
- int result;
struct resource *first, *next;
- write_lock(&resource_lock);
-
for (;; parent = first) {
- result = 0;
first = __request_resource(parent, new);
if (!first)
- goto out;
+ return first;
- result = -EBUSY;
if (first == parent)
- goto out;
+ return first;
if ((first->start > new->start) || (first->end < new->end))
break;
for (next = first; ; next = next->sibling) {
/* Partial overlap? Bad, and unfixable */
if (next->start < new->start || next->end > new->end)
- goto out;
+ return next;
if (!next->sibling)
break;
if (next->sibling->start > new->end)
break;
}
- result = 0;
-
new->parent = parent;
new->sibling = next->sibling;
new->child = first;
next = next->sibling;
next->sibling = new;
}
+ return NULL;
+}
- out:
+/**
+ * insert_resource - Inserts a resource in the resource tree
+ * @parent: parent of the new resource
+ * @new: new resource to insert
+ *
+ * Returns 0 on success, -EBUSY if the resource can't be inserted.
+ *
+ * This function is equivalent to request_resource when no conflict
+ * happens. If a conflict happens, and the conflicting resources
+ * entirely fit within the range of the new resource, then the new
+ * resource is inserted and the conflicting resources become children of
+ * the new resource.
+ */
+int insert_resource(struct resource *parent, struct resource *new)
+{
+ struct resource *conflict;
+
+ write_lock(&resource_lock);
+ conflict = __insert_resource(parent, new);
+ write_unlock(&resource_lock);
+ return conflict ? -EBUSY : 0;
+}
+
+/**
+ * insert_resource_expand_to_fit - Insert a resource into the resource tree
+ * @root: root resource descriptor
+ * @new: new resource to insert
+ *
+ * Insert a resource into the resource tree, possibly expanding it in order
+ * to make it encompass any conflicting resources.
+ */
+void insert_resource_expand_to_fit(struct resource *root, struct resource *new)
+{
+ if (new->parent)
+ return;
+
+ write_lock(&resource_lock);
+ for (;;) {
+ struct resource *conflict;
+
+ conflict = __insert_resource(root, new);
+ if (!conflict)
+ break;
+ if (conflict == root)
+ break;
+
+ /* Ok, expand resource to cover the conflict, then try again .. */
+ if (conflict->start < new->start)
+ new->start = conflict->start;
+ if (conflict->end > new->end)
+ new->end = conflict->end;
+
+ printk("Expanded resource %s due to conflict with %s\n", new->name, conflict->name);
+ }
write_unlock(&resource_lock);
- return result;
}
/**
hrtimer_init(&rt_b->rt_period_timer,
CLOCK_MONOTONIC, HRTIMER_MODE_REL);
rt_b->rt_period_timer.function = sched_rt_period_timer;
- rt_b->rt_period_timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ;
+ rt_b->rt_period_timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED;
}
static void start_rt_bandwidth(struct rt_bandwidth *rt_b)
return NOTIFY_DONE;
}
-static void init_hrtick(void)
+static __init void init_hrtick(void)
{
hotcpu_notifier(hotplug_hrtick, 0);
}
hrtimer_init(&rq->hrtick_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
rq->hrtick_timer.function = hrtick;
- rq->hrtick_timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ;
+ rq->hrtick_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU;
}
#else
static inline void hrtick_clear(struct rq *rq)
cpustat->steal = cputime64_add(cpustat->steal, tmp);
}
+/*
+ * Use precise platform statistics if available:
+ */
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+cputime_t task_utime(struct task_struct *p)
+{
+ return p->utime;
+}
+
+cputime_t task_stime(struct task_struct *p)
+{
+ return p->stime;
+}
+#else
+cputime_t task_utime(struct task_struct *p)
+{
+ clock_t utime = cputime_to_clock_t(p->utime),
+ total = utime + cputime_to_clock_t(p->stime);
+ u64 temp;
+
+ /*
+ * Use CFS's precise accounting:
+ */
+ temp = (u64)nsec_to_clock_t(p->se.sum_exec_runtime);
+
+ if (total) {
+ temp *= utime;
+ do_div(temp, total);
+ }
+ utime = (clock_t)temp;
+
+ p->prev_utime = max(p->prev_utime, clock_t_to_cputime(utime));
+ return p->prev_utime;
+}
+
+cputime_t task_stime(struct task_struct *p)
+{
+ clock_t stime;
+
+ /*
+ * Use CFS's precise accounting. (we subtract utime from
+ * the total, to make sure the total observed by userspace
+ * grows monotonically - apps rely on that):
+ */
+ stime = nsec_to_clock_t(p->se.sum_exec_runtime) -
+ cputime_to_clock_t(task_utime(p));
+
+ if (stime >= 0)
+ p->prev_stime = max(p->prev_stime, clock_t_to_cputime(stime));
+
+ return p->prev_stime;
+}
+#endif
+
+inline cputime_t task_gtime(struct task_struct *p)
+{
+ return p->gtime;
+}
+
/*
* This function gets called by the timer code, with HZ frequency.
* We call it with interrupts disabled.
* and partition_sched_domains() will fallback to the single partition
* 'fallback_doms', it also forces the domains to be rebuilt.
*
+ * If doms_new==NULL it will be replaced with cpu_online_map.
+ * ndoms_new==0 is a special case for destroying existing domains.
+ * It will not create the default domain.
+ *
* Call with hotplug lock held
*/
void partition_sched_domains(int ndoms_new, cpumask_t *doms_new,
struct sched_domain_attr *dattr_new)
{
- int i, j;
+ int i, j, n;
mutex_lock(&sched_domains_mutex);
/* always unregister in case we don't destroy any domains */
unregister_sched_domain_sysctl();
- if (doms_new == NULL)
- ndoms_new = 0;
+ n = doms_new ? ndoms_new : 0;
/* Destroy deleted domains */
for (i = 0; i < ndoms_cur; i++) {
- for (j = 0; j < ndoms_new; j++) {
+ for (j = 0; j < n; j++) {
if (cpus_equal(doms_cur[i], doms_new[j])
&& dattrs_equal(dattr_cur, i, dattr_new, j))
goto match1;
if (doms_new == NULL) {
ndoms_cur = 0;
- ndoms_new = 1;
doms_new = &fallback_doms;
cpus_andnot(doms_new[0], cpu_online_map, cpu_isolated_map);
dattr_new = NULL;
int arch_reinit_sched_domains(void)
{
get_online_cpus();
+
+ /* Destroy domains first to force the rebuild */
+ partition_sched_domains(0, NULL, NULL);
+
rebuild_sched_domains();
put_online_cpus();
+
return 0;
}
case CPU_ONLINE_FROZEN:
case CPU_DEAD:
case CPU_DEAD_FROZEN:
- partition_sched_domains(0, NULL, NULL);
+ partition_sched_domains(1, NULL, NULL);
return NOTIFY_OK;
default:
u64 rt_runtime, rt_period;
int ret = 0;
+ if (sysctl_sched_rt_period <= 0)
+ return -EINVAL;
+
rt_period = ktime_to_ns(tg->rt_bandwidth.rt_period);
rt_runtime = tg->rt_bandwidth.rt_runtime;
unsigned long flags;
int i;
+ if (sysctl_sched_rt_period <= 0)
+ return -EINVAL;
+
spin_lock_irqsave(&def_rt_bandwidth.rt_runtime_lock, flags);
for_each_possible_cpu(i) {
struct rt_rq *rt_rq = &cpu_rq(i)->rt;
static inline void sched_rt_rq_enqueue(struct rt_rq *rt_rq)
{
+ if (rt_rq->rt_nr_running)
+ resched_task(rq_of_rt_rq(rt_rq)->curr);
}
static inline void sched_rt_rq_dequeue(struct rt_rq *rt_rq)
spin_lock(&rt_rq->rt_runtime_lock);
rt_rq->rt_runtime = rt_b->rt_runtime;
rt_rq->rt_time = 0;
+ rt_rq->rt_throttled = 0;
spin_unlock(&rt_rq->rt_runtime_lock);
spin_unlock(&rt_b->rt_runtime_lock);
}
{
u64 runtime = sched_rt_runtime(rt_rq);
- if (runtime == RUNTIME_INF)
- return 0;
-
if (rt_rq->rt_throttled)
return rt_rq_throttled(rt_rq);
rt_rq = rt_rq_of_se(rt_se);
spin_lock(&rt_rq->rt_runtime_lock);
- rt_rq->rt_time += delta_exec;
- if (sched_rt_runtime_exceeded(rt_rq))
- resched_task(curr);
+ if (sched_rt_runtime(rt_rq) != RUNTIME_INF) {
+ rt_rq->rt_time += delta_exec;
+ if (sched_rt_runtime_exceeded(rt_rq))
+ resched_task(curr);
+ }
spin_unlock(&rt_rq->rt_runtime_lock);
}
}
{
struct call_single_data d;
unsigned long flags;
- /* prevent preemption and reschedule on another processor */
+ /* prevent preemption and reschedule on another processor,
+ as well as CPU removal */
int me = get_cpu();
+ int err = 0;
/* Can deadlock when called with interrupts disabled */
WARN_ON(irqs_disabled());
local_irq_save(flags);
func(info);
local_irq_restore(flags);
- } else {
+ } else if ((unsigned)cpu < NR_CPUS && cpu_online(cpu)) {
struct call_single_data *data = NULL;
if (!wait) {
data->func = func;
data->info = info;
generic_exec_single(cpu, data);
+ } else {
+ err = -ENXIO; /* CPU not online */
}
put_cpu();
- return 0;
+ return err;
}
EXPORT_SYMBOL(smp_call_function_single);
do_each_thread(g, t) {
if (!--max_count)
goto unlock;
- if (t->state & TASK_UNINTERRUPTIBLE)
+ /* use "==" to skip the TASK_KILLABLE tasks waiting on NFS */
+ if (t->state == TASK_UNINTERRUPTIBLE)
check_hung_task(t, now);
} while_each_thread(g, t);
unlock:
static struct ctl_table root_table[];
static struct ctl_table_root sysctl_table_root;
static struct ctl_table_header root_table_header = {
+ .count = 1,
.ctl_table = root_table,
.ctl_entry = LIST_HEAD_INIT(sysctl_table_root.default_set.list),
.root = &sysctl_table_root,
}
}
+/**
+ * clockevents_shutdown - shutdown the device and clear next_event
+ * @dev: device to shutdown
+ */
+void clockevents_shutdown(struct clock_event_device *dev)
+{
+ clockevents_set_mode(dev, CLOCK_EVT_MODE_SHUTDOWN);
+ dev->next_event.tv64 = KTIME_MAX;
+}
+
/**
* clockevents_program_event - Reprogram the clock event device.
* @expires: absolute expiry time (monotonic clock)
/*
* Noop handler when we shut down an event device
*/
-static void clockevents_handle_noop(struct clock_event_device *dev)
+void clockevents_handle_noop(struct clock_event_device *dev)
{
}
* released list and do a notify add later.
*/
if (old) {
- old->event_handler = clockevents_handle_noop;
clockevents_set_mode(old, CLOCK_EVT_MODE_UNUSED);
list_del(&old->list);
list_add(&old->list, &clockevents_released);
if (new) {
BUG_ON(new->mode != CLOCK_EVT_MODE_UNUSED);
- clockevents_set_mode(new, CLOCK_EVT_MODE_SHUTDOWN);
+ clockevents_shutdown(new);
}
local_irq_restore(flags);
}
if (abs(now.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec / 2)
fail = update_persistent_clock(now);
- next.tv_nsec = (NSEC_PER_SEC / 2) - now.tv_nsec;
+ next.tv_nsec = (NSEC_PER_SEC / 2) - now.tv_nsec - (TICK_NSEC / 2);
if (next.tv_nsec <= 0)
next.tv_nsec += NSEC_PER_SEC;
*/
static void tick_handle_periodic_broadcast(struct clock_event_device *dev)
{
+ ktime_t next;
+
tick_do_periodic_broadcast();
/*
/*
* Setup the next period for devices, which do not have
- * periodic mode:
+ * periodic mode. We read dev->next_event first and add to it
+ * when the event alrady expired. clockevents_program_event()
+ * sets dev->next_event only when the event is really
+ * programmed to the device.
*/
- for (;;) {
- ktime_t next = ktime_add(dev->next_event, tick_period);
+ for (next = dev->next_event; ;) {
+ next = ktime_add(next, tick_period);
if (!clockevents_program_event(dev, next, ktime_get()))
return;
struct clock_event_device *bc, *dev;
struct tick_device *td;
unsigned long flags, *reason = why;
- int cpu;
+ int cpu, bc_stopped;
spin_lock_irqsave(&tick_broadcast_lock, flags);
if (!tick_device_is_functional(dev))
goto out;
+ bc_stopped = cpus_empty(tick_broadcast_mask);
+
switch (*reason) {
case CLOCK_EVT_NOTIFY_BROADCAST_ON:
case CLOCK_EVT_NOTIFY_BROADCAST_FORCE:
if (!cpu_isset(cpu, tick_broadcast_mask)) {
cpu_set(cpu, tick_broadcast_mask);
- if (td->mode == TICKDEV_MODE_PERIODIC)
- clockevents_set_mode(dev,
- CLOCK_EVT_MODE_SHUTDOWN);
+ if (tick_broadcast_device.mode ==
+ TICKDEV_MODE_PERIODIC)
+ clockevents_shutdown(dev);
}
if (*reason == CLOCK_EVT_NOTIFY_BROADCAST_FORCE)
tick_broadcast_force = 1;
if (!tick_broadcast_force &&
cpu_isset(cpu, tick_broadcast_mask)) {
cpu_clear(cpu, tick_broadcast_mask);
- if (td->mode == TICKDEV_MODE_PERIODIC)
+ if (tick_broadcast_device.mode ==
+ TICKDEV_MODE_PERIODIC)
tick_setup_periodic(dev, 0);
}
break;
}
- if (cpus_empty(tick_broadcast_mask))
- clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN);
- else {
+ if (cpus_empty(tick_broadcast_mask)) {
+ if (!bc_stopped)
+ clockevents_shutdown(bc);
+ } else if (bc_stopped) {
if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC)
tick_broadcast_start_periodic(bc);
else
if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) {
if (bc && cpus_empty(tick_broadcast_mask))
- clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN);
+ clockevents_shutdown(bc);
}
spin_unlock_irqrestore(&tick_broadcast_lock, flags);
bc = tick_broadcast_device.evtdev;
if (bc)
- clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN);
+ clockevents_shutdown(bc);
spin_unlock_irqrestore(&tick_broadcast_lock, flags);
}
static int tick_broadcast_set_event(ktime_t expires, int force)
{
struct clock_event_device *bc = tick_broadcast_device.evtdev;
- ktime_t now = ktime_get();
- int res;
-
- for(;;) {
- res = clockevents_program_event(bc, expires, now);
- if (!res || !force)
- return res;
- now = ktime_get();
- expires = ktime_add(now, ktime_set(0, bc->min_delta_ns));
- }
+
+ return tick_dev_program_event(bc, expires, force);
}
int tick_resume_broadcast_oneshot(struct clock_event_device *bc)
cpu_clear(cpu, tick_broadcast_oneshot_mask);
}
+static void tick_broadcast_init_next_event(cpumask_t *mask, ktime_t expires)
+{
+ struct tick_device *td;
+ int cpu;
+
+ for_each_cpu_mask_nr(cpu, *mask) {
+ td = &per_cpu(tick_cpu_device, cpu);
+ if (td->evtdev)
+ td->evtdev->next_event = expires;
+ }
+}
+
/**
* tick_broadcast_setup_oneshot - setup the broadcast device
*/
void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
{
- bc->event_handler = tick_handle_oneshot_broadcast;
- clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT);
- bc->next_event.tv64 = KTIME_MAX;
+ /* Set it up only once ! */
+ if (bc->event_handler != tick_handle_oneshot_broadcast) {
+ int was_periodic = bc->mode == CLOCK_EVT_MODE_PERIODIC;
+ int cpu = smp_processor_id();
+ cpumask_t mask;
+
+ bc->event_handler = tick_handle_oneshot_broadcast;
+ clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT);
+
+ /* Take the do_timer update */
+ tick_do_timer_cpu = cpu;
+
+ /*
+ * We must be careful here. There might be other CPUs
+ * waiting for periodic broadcast. We need to set the
+ * oneshot_mask bits for those and program the
+ * broadcast device to fire.
+ */
+ mask = tick_broadcast_mask;
+ cpu_clear(cpu, mask);
+ cpus_or(tick_broadcast_oneshot_mask,
+ tick_broadcast_oneshot_mask, mask);
+
+ if (was_periodic && !cpus_empty(mask)) {
+ tick_broadcast_init_next_event(&mask, tick_next_period);
+ tick_broadcast_set_event(tick_next_period, 1);
+ } else
+ bc->next_event.tv64 = KTIME_MAX;
+ }
}
/*
spin_unlock_irqrestore(&tick_broadcast_lock, flags);
}
+/*
+ * Check, whether the broadcast device is in one shot mode
+ */
+int tick_broadcast_oneshot_active(void)
+{
+ return tick_broadcast_device.mode == TICKDEV_MODE_ONESHOT;
+}
+
#endif
*/
ktime_t tick_next_period;
ktime_t tick_period;
-int tick_do_timer_cpu __read_mostly = -1;
+int tick_do_timer_cpu __read_mostly = TICK_DO_TIMER_BOOT;
DEFINE_SPINLOCK(tick_device_lock);
/*
if (!tick_device_is_functional(dev))
return;
- if (dev->features & CLOCK_EVT_FEAT_PERIODIC) {
+ if ((dev->features & CLOCK_EVT_FEAT_PERIODIC) &&
+ !tick_broadcast_oneshot_active()) {
clockevents_set_mode(dev, CLOCK_EVT_MODE_PERIODIC);
} else {
unsigned long seq;
* If no cpu took the do_timer update, assign it to
* this cpu:
*/
- if (tick_do_timer_cpu == -1) {
+ if (tick_do_timer_cpu == TICK_DO_TIMER_BOOT) {
tick_do_timer_cpu = cpu;
tick_next_period = ktime_get();
tick_period = ktime_set(0, NSEC_PER_SEC / HZ);
} else {
handler = td->evtdev->event_handler;
next_event = td->evtdev->next_event;
+ td->evtdev->event_handler = clockevents_handle_noop;
}
td->evtdev = newdev;
* not give it back to the clockevents layer !
*/
if (tick_is_broadcast_device(curdev)) {
- clockevents_set_mode(curdev, CLOCK_EVT_MODE_SHUTDOWN);
+ clockevents_shutdown(curdev);
curdev = NULL;
}
clockevents_exchange_device(curdev, newdev);
if (*cpup == tick_do_timer_cpu) {
int cpu = first_cpu(cpu_online_map);
- tick_do_timer_cpu = (cpu != NR_CPUS) ? cpu : -1;
+ tick_do_timer_cpu = (cpu != NR_CPUS) ? cpu :
+ TICK_DO_TIMER_NONE;
}
spin_unlock_irqrestore(&tick_device_lock, flags);
}
unsigned long flags;
spin_lock_irqsave(&tick_device_lock, flags);
- clockevents_set_mode(td->evtdev, CLOCK_EVT_MODE_SHUTDOWN);
+ clockevents_shutdown(td->evtdev);
spin_unlock_irqrestore(&tick_device_lock, flags);
}
/*
* tick internal variable and functions used by low/high res code
*/
+
+#define TICK_DO_TIMER_NONE -1
+#define TICK_DO_TIMER_BOOT -2
+
DECLARE_PER_CPU(struct tick_device, tick_cpu_device);
extern spinlock_t tick_device_lock;
extern ktime_t tick_next_period;
extern void tick_setup_periodic(struct clock_event_device *dev, int broadcast);
extern void tick_handle_periodic(struct clock_event_device *dev);
+extern void clockevents_shutdown(struct clock_event_device *dev);
+
/*
* NO_HZ / high resolution timer shared code
*/
extern void tick_setup_oneshot(struct clock_event_device *newdev,
void (*handler)(struct clock_event_device *),
ktime_t nextevt);
+extern int tick_dev_program_event(struct clock_event_device *dev,
+ ktime_t expires, int force);
extern int tick_program_event(ktime_t expires, int force);
extern void tick_oneshot_notify(void);
extern int tick_switch_to_oneshot(void (*handler)(struct clock_event_device *));
extern void tick_broadcast_switch_to_oneshot(void);
extern void tick_shutdown_broadcast_oneshot(unsigned int *cpup);
extern int tick_resume_broadcast_oneshot(struct clock_event_device *bc);
+extern int tick_broadcast_oneshot_active(void);
# else /* BROADCAST */
static inline void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
{
static inline void tick_broadcast_oneshot_control(unsigned long reason) { }
static inline void tick_broadcast_switch_to_oneshot(void) { }
static inline void tick_shutdown_broadcast_oneshot(unsigned int *cpup) { }
+static inline int tick_broadcast_oneshot_active(void) { return 0; }
# endif /* !BROADCAST */
#else /* !ONESHOT */
{
return 0;
}
+static inline int tick_broadcast_oneshot_active(void) { return 0; }
#endif /* !TICK_ONESHOT */
/*
#include "tick-internal.h"
/**
- * tick_program_event
+ * tick_program_event internal worker function
*/
-int tick_program_event(ktime_t expires, int force)
+int tick_dev_program_event(struct clock_event_device *dev, ktime_t expires,
+ int force)
{
- struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
ktime_t now = ktime_get();
+ int i;
- while (1) {
+ for (i = 0;;) {
int ret = clockevents_program_event(dev, expires, now);
if (!ret || !force)
return ret;
+
+ /*
+ * We tried 2 times to program the device with the given
+ * min_delta_ns. If that's not working then we double it
+ * and emit a warning.
+ */
+ if (++i > 2) {
+ /* Increase the min. delta and try again */
+ if (!dev->min_delta_ns)
+ dev->min_delta_ns = 5000;
+ else
+ dev->min_delta_ns += dev->min_delta_ns >> 1;
+
+ printk(KERN_WARNING
+ "CE: %s increasing min_delta_ns to %lu nsec\n",
+ dev->name ? dev->name : "?",
+ dev->min_delta_ns << 1);
+
+ i = 0;
+ }
+
now = ktime_get();
- expires = ktime_add(now, ktime_set(0, dev->min_delta_ns));
+ expires = ktime_add_ns(now, dev->min_delta_ns);
}
}
+/**
+ * tick_program_event
+ */
+int tick_program_event(ktime_t expires, int force)
+{
+ struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
+
+ return tick_dev_program_event(dev, expires, force);
+}
+
/**
* tick_resume_onshot - resume oneshot mode
*/
{
newdev->event_handler = handler;
clockevents_set_mode(newdev, CLOCK_EVT_MODE_ONESHOT);
- clockevents_program_event(newdev, next_event, ktime_get());
+ tick_dev_program_event(newdev, next_event, 1);
}
/**
incr * ticks);
}
do_timer(++ticks);
+
+ /* Keep the tick_next_period variable up to date */
+ tick_next_period = ktime_add(last_jiffies_update, tick_period);
}
write_sequnlock(&xtime_lock);
}
ts->idle_lastupdate = now;
ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta);
ts->idle_active = 0;
+
+ sched_clock_idle_wakeup_event(0);
}
}
}
ts->idle_entrytime = now;
ts->idle_active = 1;
+ sched_clock_idle_sleep_event();
return now;
}
*/
if (unlikely(!cpu_online(cpu))) {
if (cpu == tick_do_timer_cpu)
- tick_do_timer_cpu = -1;
+ tick_do_timer_cpu = TICK_DO_TIMER_NONE;
}
if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE))
* invoked.
*/
if (cpu == tick_do_timer_cpu)
- tick_do_timer_cpu = -1;
+ tick_do_timer_cpu = TICK_DO_TIMER_NONE;
ts->idle_sleeps++;
* this duty, then the jiffies update is still serialized by
* xtime_lock.
*/
- if (unlikely(tick_do_timer_cpu == -1))
+ if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE))
tick_do_timer_cpu = cpu;
/* Check, if the jiffies need an update */
* this duty, then the jiffies update is still serialized by
* xtime_lock.
*/
- if (unlikely(tick_do_timer_cpu == -1))
+ if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE))
tick_do_timer_cpu = cpu;
#endif
*/
hrtimer_init(&ts->sched_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
ts->sched_timer.function = tick_sched_timer;
- ts->sched_timer.cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ;
+ ts->sched_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU;
/* Get the next period (per cpu) */
ts->sched_timer.expires = tick_init_jiffy_update();
hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
hrtimer->function = stack_trace_timer_fn;
- hrtimer->cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ;
+ hrtimer->cb_mode = HRTIMER_CB_IRQSAFE_PERCPU;
hrtimer_start(hrtimer, ns_to_ktime(sample_period), HRTIMER_MODE_REL);
}
bool
depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
select STACKTRACE
- select FRAME_POINTER if !X86 && !MIPS
+ select FRAME_POINTER if !X86 && !MIPS && !PPC
select KALLSYMS
select KALLSYMS_ALL
depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
depends on !X86_64
select STACKTRACE
- select FRAME_POINTER
+ select FRAME_POINTER if !PPC
help
Provide stacktrace filter for fault-injection capabilities
config LATENCYTOP
bool "Latency measuring infrastructure"
- select FRAME_POINTER if !MIPS
+ select FRAME_POINTER if !MIPS && !PPC
select KALLSYMS
select KALLSYMS_ALL
select STACKTRACE
/*
* Allocate a new object. If the pool is empty, switch off the debugger.
+ * Must be called with interrupts disabled.
*/
static struct debug_obj *
alloc_object(void *addr, struct debug_bucket *b, struct debug_obj_descr *descr)
static void free_object(struct debug_obj *obj)
{
unsigned long idx = (unsigned long)(obj - obj_static_pool);
+ unsigned long flags;
if (obj_pool_free < ODEBUG_POOL_SIZE || idx < ODEBUG_POOL_SIZE) {
- spin_lock(&pool_lock);
+ spin_lock_irqsave(&pool_lock, flags);
hlist_add_head(&obj->node, &obj_pool);
obj_pool_free++;
obj_pool_used--;
- spin_unlock(&pool_lock);
+ spin_unlock_irqrestore(&pool_lock, flags);
} else {
- spin_lock(&pool_lock);
+ spin_lock_irqsave(&pool_lock, flags);
obj_pool_used--;
- spin_unlock(&pool_lock);
+ spin_unlock_irqrestore(&pool_lock, flags);
kmem_cache_free(obj_cache, obj);
}
}
{
struct debug_bucket *db = obj_hash;
struct hlist_node *node, *tmp;
+ HLIST_HEAD(freelist);
struct debug_obj *obj;
unsigned long flags;
int i;
for (i = 0; i < ODEBUG_HASH_SIZE; i++, db++) {
spin_lock_irqsave(&db->lock, flags);
- hlist_for_each_entry_safe(obj, node, tmp, &db->list, node) {
+ hlist_move_list(&db->list, &freelist);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ /* Now free them */
+ hlist_for_each_entry_safe(obj, node, tmp, &freelist, node) {
hlist_del(&obj->node);
free_object(obj);
}
- spin_unlock_irqrestore(&db->lock, flags);
}
}
return;
default:
hlist_del(&obj->node);
+ spin_unlock_irqrestore(&db->lock, flags);
free_object(obj);
- break;
+ return;
}
out_unlock:
spin_unlock_irqrestore(&db->lock, flags);
{
unsigned long flags, oaddr, saddr, eaddr, paddr, chunks;
struct hlist_node *node, *tmp;
+ HLIST_HEAD(freelist);
struct debug_obj_descr *descr;
enum debug_obj_state state;
struct debug_bucket *db;
goto repeat;
default:
hlist_del(&obj->node);
- free_object(obj);
+ hlist_add_head(&obj->node, &freelist);
break;
}
}
spin_unlock_irqrestore(&db->lock, flags);
+
+ /* Now free them */
+ hlist_for_each_entry_safe(obj, node, tmp, &freelist, node) {
+ hlist_del(&obj->node);
+ free_object(obj);
+ }
+
if (cnt > debug_objects_maxchain)
debug_objects_maxchain = cnt;
}
{
unsigned int offset = 0;
struct sg_mapping_iter miter;
+ unsigned long flags;
sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC);
+ local_irq_save(flags);
+
while (sg_miter_next(&miter) && offset < buflen) {
unsigned int len;
sg_miter_stop(&miter);
+ local_irq_restore(flags);
return offset;
}
* the lowest available address range.
*/
dma_addr_t handle;
- handle = swiotlb_map_single(NULL, NULL, size, DMA_FROM_DEVICE);
+ handle = swiotlb_map_single(hwdev, NULL, size, DMA_FROM_DEVICE);
if (swiotlb_dma_mapping_error(hwdev, handle))
return NULL;
#include <asm/page.h> /* for PAGE_SIZE */
#include <asm/div64.h>
+#include <asm/sections.h> /* for dereference_function_descriptor() */
/* Works only for digits and letters, but small and fast */
#define TOLOWER(x) ((x) | 0x20)
return buf;
}
-static inline void *dereference_function_descriptor(void *ptr)
-{
-#if defined(CONFIG_IA64) || defined(CONFIG_PPC64)
- void *p;
- if (!probe_kernel_address(ptr, p))
- ptr = p;
-#endif
- return ptr;
-}
-
static char *symbol_string(char *buf, char *end, void *ptr, int field_width, int precision, int flags)
{
unsigned long value = (unsigned long) ptr;
* After a write we want buffered reads to be sure to go to disk to get
* the new data. We invalidate clean cached page from the region we're
* about to write. We do this *before* the write so that we can return
- * -EIO without clobbering -EIOCBQUEUED from ->direct_IO().
+ * without clobbering -EIOCBQUEUED from ->direct_IO().
*/
if (mapping->nrpages) {
written = invalidate_inode_pages2_range(mapping,
pos >> PAGE_CACHE_SHIFT, end);
- if (written)
+ /*
+ * If a page can not be invalidated, return 0 to fall back
+ * to buffered write.
+ */
+ if (written) {
+ if (written == -EBUSY)
+ return 0;
goto out;
+ }
}
written = mapping->a_ops->direct_IO(WRITE, iocb, iov, pos, *nr_segs);
struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p)
{
+ /*
+ * mm_update_next_owner() may clear mm->owner to NULL
+ * if it races with swapoff, page migration, etc.
+ * So this can be called with p == NULL.
+ */
+ if (unlikely(!p))
+ return NULL;
+
return container_of(task_subsys_state(p, mem_cgroup_subsys_id),
struct mem_cgroup, css);
}
if (likely(!memcg)) {
rcu_read_lock();
mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
+ if (unlikely(!mem)) {
+ rcu_read_unlock();
+ kmem_cache_free(page_cgroup_cache, pc);
+ return 0;
+ }
/*
* For every charge from the cgroup, increment reference count
*/
rcu_read_lock();
mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
+ if (unlikely(!mem)) {
+ rcu_read_unlock();
+ return 0;
+ }
css_get(&mem->css);
rcu_read_unlock();
do {
progress = try_to_free_mem_cgroup_pages(mem, gfp_mask);
+ progress += res_counter_check_under_limit(&mem->res);
} while (!progress && --retry);
css_put(&mem->css);
} else {
switch (flags & MAP_TYPE) {
case MAP_SHARED:
+ /*
+ * Ignore pgoff.
+ */
+ pgoff = 0;
vm_flags |= VM_SHARED | VM_MAYSHARE;
break;
case MAP_PRIVATE:
(z->zone && !zref_in_nodemask(z, nodes)))
z++;
- *zone = zonelist_zone(z++);
+ *zone = zonelist_zone(z);
return z;
}
{
int i;
int nr_pages = 1 << order;
+ struct page *p = page + 1;
set_compound_page_dtor(page, free_compound_page);
set_compound_order(page, order);
__SetPageHead(page);
- for (i = 1; i < nr_pages; i++) {
- struct page *p = page + i;
-
+ for (i = 1; i < nr_pages; i++, p++) {
+ if (unlikely((i & (MAX_ORDER_NR_PAGES - 1)) == 0))
+ p = pfn_to_page(page_to_pfn(page) + i);
__SetPageTail(p);
p->first_page = page;
}
{
int i;
int nr_pages = 1 << order;
+ struct page *p = page + 1;
if (unlikely(compound_order(page) != order))
bad_page(page);
if (unlikely(!PageHead(page)))
bad_page(page);
__ClearPageHead(page);
- for (i = 1; i < nr_pages; i++) {
- struct page *p = page + i;
+ for (i = 1; i < nr_pages; i++, p++) {
+ if (unlikely((i & (MAX_ORDER_NR_PAGES - 1)) == 0))
+ p = pfn_to_page(page_to_pfn(page) + i);
if (unlikely(!PageTail(p) |
(p->first_page != page)))
#endif
for (page = start_page; page <= end_page;) {
+ /* Make sure we are not inadvertently changing nodes */
+ VM_BUG_ON(page_to_nid(page) != zone_to_nid(zone));
+
if (!pfn_valid_within(page_to_pfn(page))) {
page++;
continue;
continue;
page = pfn_to_page(pfn);
+ /* Watch out for overlapping nodes */
+ if (page_to_nid(page) != zone_to_nid(zone))
+ continue;
+
/* Blocks with reserved pages will never free, skip them. */
if (PageReserved(page))
continue;
}
#ifndef CONFIG_NEED_MULTIPLE_NODES
-struct pglist_data contig_page_data = { .bdata = &bootmem_node_data[0] };
+struct pglist_data __refdata contig_page_data = { .bdata = &bootmem_node_data[0] };
EXPORT_SYMBOL(contig_page_data);
#endif
* linux/mm/page_isolation.c
*/
-#include <stddef.h>
#include <linux/mm.h>
#include <linux/page-isolation.h>
#include <linux/pageblock-flags.h>
int test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn)
{
- unsigned long pfn;
+ unsigned long pfn, flags;
struct page *page;
+ struct zone *zone;
+ int ret;
pfn = start_pfn;
/*
if (pfn < end_pfn)
return -EBUSY;
/* Check all pages are free or Marked as ISOLATED */
- if (__test_page_isolated_in_pageblock(start_pfn, end_pfn))
- return 0;
- return -EBUSY;
+ zone = page_zone(pfn_to_page(pfn));
+ spin_lock_irqsave(&zone->lock, flags);
+ ret = __test_page_isolated_in_pageblock(start_pfn, end_pfn);
+ spin_unlock_irqrestore(&zone->lock, flags);
+ return ret ? 0 : -EBUSY;
}
static unsigned long max_pages(unsigned long min_pages)
{
unsigned long node_free_pages, max;
- struct zone *zones = NODE_DATA(numa_node_id())->node_zones;
+ int node = numa_node_id();
+ struct zone *zones = NODE_DATA(node)->node_zones;
+ int num_cpus_on_node;
+ node_to_cpumask_ptr(cpumask_on_node, node);
node_free_pages =
#ifdef CONFIG_ZONE_DMA
zone_page_state(&zones[ZONE_NORMAL], NR_FREE_PAGES);
max = node_free_pages / FRACTION_OF_NODE_MEM;
+
+ num_cpus_on_node = cpus_weight_nr(*cpumask_on_node);
+ max /= num_cpus_on_node;
+
return max(max, min_pages);
}
INIT_LIST_HEAD(&n->partial);
#ifdef CONFIG_SLUB_DEBUG
atomic_long_set(&n->nr_slabs, 0);
+ atomic_long_set(&n->total_objects, 0);
INIT_LIST_HEAD(&n->full);
#endif
}
if (!dentry)
goto put_memory;
+ error = -ENFILE;
+ file = get_empty_filp();
+ if (!file)
+ goto put_dentry;
+
error = -ENOSPC;
inode = ramfs_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0);
if (!inode)
- goto put_dentry;
+ goto close_file;
d_instantiate(dentry, inode);
- error = -ENFILE;
- file = alloc_file(shm_mnt, dentry, FMODE_WRITE | FMODE_READ,
- &ramfs_file_operations);
- if (!file)
- goto put_dentry;
-
+ inode->i_size = size;
inode->i_nlink = 0; /* It is unlinked */
+ init_file(file, shm_mnt, dentry, FMODE_WRITE | FMODE_READ,
+ &ramfs_file_operations);
- /* notify everyone as to the change of file size */
- error = do_truncate(dentry, size, 0, file);
- if (error < 0)
+#ifndef CONFIG_MMU
+ error = ramfs_nommu_expand_for_mapping(inode, size);
+ if (error)
goto close_file;
-
+#endif
return file;
close_file:
put_filp(file);
- return ERR_PTR(error);
-
put_dentry:
dput(dentry);
put_memory:
* Any pages which are found to be mapped into pagetables are unmapped prior to
* invalidation.
*
- * Returns -EIO if any pages could not be invalidated.
+ * Returns -EBUSY if any pages could not be invalidated.
*/
int invalidate_inode_pages2_range(struct address_space *mapping,
pgoff_t start, pgoff_t end)
ret2 = do_launder_page(mapping, page);
if (ret2 == 0) {
if (!invalidate_complete_page2(mapping, page))
- ret2 = -EIO;
+ ret2 = -EBUSY;
}
if (ret2 < 0)
ret = ret2;
continue;
page = pfn_to_page(pfn);
+#ifdef CONFIG_ARCH_FLATMEM_HAS_HOLES
+ /*
+ * Ordinarily, memory holes in flatmem still have a valid
+ * memmap for the PFN range. However, an architecture for
+ * embedded systems (e.g. ARM) can free up the memmap backing
+ * holes to save memory on the assumption the memmap is
+ * never used. The page_zone linkages are then broken even
+ * though pfn_valid() returns true. Skip the page if the
+ * linkages are broken. Even if this test passed, the impact
+ * is that the counters for the movable type are off but
+ * fragmentation monitoring is likely meaningless on small
+ * systems.
+ */
+ if (page_zone(page) != zone)
+ continue;
+#endif
mtype = get_pageblock_migratetype(page);
- count[mtype]++;
+ if (mtype < MIGRATE_TYPES)
+ count[mtype]++;
}
/* Print counts */
int option;
int ret = 0;
- clnt->trans_mod = v9fs_default_trans();
clnt->dotu = 1;
clnt->msize = 8192;
clnt->msize = option;
break;
case Opt_trans:
- clnt->trans_mod = v9fs_match_trans(&args[0]);
+ clnt->trans_mod = v9fs_get_trans_by_name(&args[0]);
break;
case Opt_legacy:
clnt->dotu = 0;
continue;
}
}
+
+ if (!clnt->trans_mod)
+ clnt->trans_mod = v9fs_get_default_trans();
+
kfree(options);
return ret;
}
if (!clnt)
return ERR_PTR(-ENOMEM);
+ clnt->trans_mod = NULL;
clnt->trans = NULL;
spin_lock_init(&clnt->lock);
INIT_LIST_HEAD(&clnt->fidlist);
clnt->trans = NULL;
}
+ v9fs_put_trans(clnt->trans_mod);
+
list_for_each_entry_safe(fid, fidptr, &clnt->fidlist, flist)
p9_fid_destroy(fid);
unsigned char **pdata)
{
*pdata = buf_alloc(bufp, count);
+ if (*pdata == NULL)
+ return -ENOMEM;
memmove(*pdata, data, count);
- return count;
+ return 0;
}
static int
unsigned char **pdata)
{
*pdata = buf_alloc(bufp, count);
+ if (*pdata == NULL)
+ return -ENOMEM;
return copy_from_user(*pdata, data, count);
}
#include <linux/parser.h>
#include <net/9p/transport.h>
#include <linux/list.h>
+#include <linux/spinlock.h>
#ifdef CONFIG_NET_9P_DEBUG
unsigned int p9_debug_level = 0; /* feature-rific global debug level */
*
*/
+static DEFINE_SPINLOCK(v9fs_trans_lock);
static LIST_HEAD(v9fs_trans_list);
-static struct p9_trans_module *v9fs_default_transport;
/**
* v9fs_register_trans - register a new transport with 9p
*/
void v9fs_register_trans(struct p9_trans_module *m)
{
+ spin_lock(&v9fs_trans_lock);
list_add_tail(&m->list, &v9fs_trans_list);
- if (m->def)
- v9fs_default_transport = m;
+ spin_unlock(&v9fs_trans_lock);
}
EXPORT_SYMBOL(v9fs_register_trans);
/**
- * v9fs_match_trans - match transport versus registered transports
+ * v9fs_unregister_trans - unregister a 9p transport
+ * @m: the transport to remove
+ *
+ */
+void v9fs_unregister_trans(struct p9_trans_module *m)
+{
+ spin_lock(&v9fs_trans_lock);
+ list_del_init(&m->list);
+ spin_unlock(&v9fs_trans_lock);
+}
+EXPORT_SYMBOL(v9fs_unregister_trans);
+
+/**
+ * v9fs_get_trans_by_name - get transport with the matching name
* @name: string identifying transport
*
*/
-struct p9_trans_module *v9fs_match_trans(const substring_t *name)
+struct p9_trans_module *v9fs_get_trans_by_name(const substring_t *name)
{
- struct list_head *p;
- struct p9_trans_module *t = NULL;
-
- list_for_each(p, &v9fs_trans_list) {
- t = list_entry(p, struct p9_trans_module, list);
- if (strncmp(t->name, name->from, name->to-name->from) == 0)
- return t;
- }
- return NULL;
+ struct p9_trans_module *t, *found = NULL;
+
+ spin_lock(&v9fs_trans_lock);
+
+ list_for_each_entry(t, &v9fs_trans_list, list)
+ if (strncmp(t->name, name->from, name->to-name->from) == 0 &&
+ try_module_get(t->owner)) {
+ found = t;
+ break;
+ }
+
+ spin_unlock(&v9fs_trans_lock);
+ return found;
}
-EXPORT_SYMBOL(v9fs_match_trans);
+EXPORT_SYMBOL(v9fs_get_trans_by_name);
/**
- * v9fs_default_trans - returns pointer to default transport
+ * v9fs_get_default_trans - get the default transport
*
*/
-struct p9_trans_module *v9fs_default_trans(void)
+struct p9_trans_module *v9fs_get_default_trans(void)
{
- if (v9fs_default_transport)
- return v9fs_default_transport;
- else if (!list_empty(&v9fs_trans_list))
- return list_first_entry(&v9fs_trans_list,
- struct p9_trans_module, list);
- else
- return NULL;
+ struct p9_trans_module *t, *found = NULL;
+
+ spin_lock(&v9fs_trans_lock);
+
+ list_for_each_entry(t, &v9fs_trans_list, list)
+ if (t->def && try_module_get(t->owner)) {
+ found = t;
+ break;
+ }
+
+ if (!found)
+ list_for_each_entry(t, &v9fs_trans_list, list)
+ if (try_module_get(t->owner)) {
+ found = t;
+ break;
+ }
+
+ spin_unlock(&v9fs_trans_lock);
+ return found;
}
-EXPORT_SYMBOL(v9fs_default_trans);
+EXPORT_SYMBOL(v9fs_get_default_trans);
+/**
+ * v9fs_put_trans - put trans
+ * @m: transport to put
+ *
+ */
+void v9fs_put_trans(struct p9_trans_module *m)
+{
+ if (m)
+ module_put(m->owner);
+}
/**
* v9fs_init - Initialize module
static void __exit exit_p9(void)
{
printk(KERN_INFO "Unloading 9P2000 support\n");
+
+ p9_trans_fd_exit();
}
module_init(init_p9)
* @trans: reference to transport instance for this connection
* @tagpool: id accounting for transactions
* @err: error state
- * @equeue: event wait_q (?)
* @req_list: accounting for requests which have been sent
* @unsent_req_list: accounting for requests that haven't been sent
* @rcall: current response &p9_fcall structure
struct p9_trans *trans;
struct p9_idpool *tagpool;
int err;
- wait_queue_head_t equeue;
struct list_head req_list;
struct list_head unsent_req_list;
struct p9_fcall *rcall;
static void p9_conn_cancel(struct p9_conn *m, int err);
-static int p9_mux_global_init(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(p9_mux_poll_tasks); i++)
- p9_mux_poll_tasks[i].task = NULL;
-
- p9_mux_wq = create_workqueue("v9fs");
- if (!p9_mux_wq) {
- printk(KERN_WARNING "v9fs: mux: creating workqueue failed\n");
- return -ENOMEM;
- }
-
- return 0;
-}
-
static u16 p9_mux_get_tag(struct p9_conn *m)
{
int tag;
static struct p9_conn *p9_conn_create(struct p9_trans *trans)
{
int i, n;
- struct p9_conn *m, *mtmp;
+ struct p9_conn *m;
P9_DPRINTK(P9_DEBUG_MUX, "transport %p msize %d\n", trans,
trans->msize);
- m = kmalloc(sizeof(struct p9_conn), GFP_KERNEL);
+ m = kzalloc(sizeof(struct p9_conn), GFP_KERNEL);
if (!m)
return ERR_PTR(-ENOMEM);
m->trans = trans;
m->tagpool = p9_idpool_create();
if (IS_ERR(m->tagpool)) {
- mtmp = ERR_PTR(-ENOMEM);
kfree(m);
- return mtmp;
+ return ERR_PTR(-ENOMEM);
}
- m->err = 0;
- init_waitqueue_head(&m->equeue);
INIT_LIST_HEAD(&m->req_list);
INIT_LIST_HEAD(&m->unsent_req_list);
- m->rcall = NULL;
- m->rpos = 0;
- m->rbuf = NULL;
- m->wpos = m->wsize = 0;
- m->wbuf = NULL;
INIT_WORK(&m->rq, p9_read_work);
INIT_WORK(&m->wq, p9_write_work);
- m->wsched = 0;
- memset(&m->poll_waddr, 0, sizeof(m->poll_waddr));
- m->poll_task = NULL;
n = p9_mux_poll_start(m);
if (n) {
kfree(m);
for (i = 0; i < ARRAY_SIZE(m->poll_waddr); i++) {
if (IS_ERR(m->poll_waddr[i])) {
p9_mux_poll_stop(m);
- mtmp = (void *)m->poll_waddr; /* the error code */
kfree(m);
- m = mtmp;
- break;
+ return (void *)m->poll_waddr; /* the error code */
}
}
{
P9_DPRINTK(P9_DEBUG_MUX, "mux %p prev %p next %p\n", m,
m->mux_list.prev, m->mux_list.next);
- p9_conn_cancel(m, -ECONNRESET);
-
- if (!list_empty(&m->req_list)) {
- /* wait until all processes waiting on this session exit */
- P9_DPRINTK(P9_DEBUG_MUX,
- "mux %p waiting for empty request queue\n", m);
- wait_event_timeout(m->equeue, (list_empty(&m->req_list)), 5000);
- P9_DPRINTK(P9_DEBUG_MUX, "mux %p request queue empty: %d\n", m,
- list_empty(&m->req_list));
- }
p9_mux_poll_stop(m);
+ cancel_work_sync(&m->rq);
+ cancel_work_sync(&m->wq);
+
+ p9_conn_cancel(m, -ECONNRESET);
+
m->trans = NULL;
p9_idpool_destroy(m->tagpool);
kfree(m);
(*req->cb) (req, req->cba);
else
kfree(req->rcall);
-
- wake_up(&m->equeue);
}
} else {
if (err >= 0 && rcall->id != P9_RFLUSH)
else
n = p9_mux_get_tag(m);
- if (n < 0)
+ if (n < 0) {
+ kfree(req);
return ERR_PTR(-ENOMEM);
+ }
p9_set_tag(tc, n);
(*req->cb) (req, req->cba);
else
kfree(req->rcall);
-
- wake_up(&m->equeue);
}
kfree(freq->tcall);
else
kfree(req->rcall);
}
-
- wake_up(&m->equeue);
}
/**
{
int ret, n;
struct p9_trans_fd *ts = NULL;
- mm_segment_t oldfs;
if (trans && trans->status == Connected)
ts = trans->priv;
if (!ts->wr->f_op || !ts->wr->f_op->poll)
return -EIO;
- oldfs = get_fs();
- set_fs(get_ds());
-
ret = ts->rd->f_op->poll(ts->rd, pt);
if (ret < 0)
- goto end;
+ return ret;
if (ts->rd != ts->wr) {
n = ts->wr->f_op->poll(ts->wr, pt);
- if (n < 0) {
- ret = n;
- goto end;
- }
+ if (n < 0)
+ return n;
ret = (ret & ~POLLOUT) | (n & ~POLLIN);
}
-end:
- set_fs(oldfs);
return ret;
}
.maxsize = MAX_SOCK_BUF,
.def = 1,
.create = p9_trans_create_tcp,
+ .owner = THIS_MODULE,
};
static struct p9_trans_module p9_unix_trans = {
.maxsize = MAX_SOCK_BUF,
.def = 0,
.create = p9_trans_create_unix,
+ .owner = THIS_MODULE,
};
static struct p9_trans_module p9_fd_trans = {
.maxsize = MAX_SOCK_BUF,
.def = 0,
.create = p9_trans_create_fd,
+ .owner = THIS_MODULE,
};
int p9_trans_fd_init(void)
{
- int ret = p9_mux_global_init();
- if (ret) {
- printk(KERN_WARNING "9p: starting mux failed\n");
- return ret;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(p9_mux_poll_tasks); i++)
+ p9_mux_poll_tasks[i].task = NULL;
+
+ p9_mux_wq = create_workqueue("v9fs");
+ if (!p9_mux_wq) {
+ printk(KERN_WARNING "v9fs: mux: creating workqueue failed\n");
+ return -ENOMEM;
}
v9fs_register_trans(&p9_tcp_trans);
return 0;
}
-EXPORT_SYMBOL(p9_trans_fd_init);
+
+void p9_trans_fd_exit(void)
+{
+ v9fs_unregister_trans(&p9_tcp_trans);
+ v9fs_unregister_trans(&p9_unix_trans);
+ v9fs_unregister_trans(&p9_fd_trans);
+
+ destroy_workqueue(p9_mux_wq);
+}
.create = p9_virtio_create,
.maxsize = PAGE_SIZE*16,
.def = 0,
+ .owner = THIS_MODULE,
};
/* The standard init function */
static void __exit p9_virtio_cleanup(void)
{
unregister_virtio_driver(&p9_virtio_drv);
+ v9fs_unregister_trans(&p9_virtio_trans);
}
module_init(p9_virtio_init);
#define BT_DBG(D...)
#endif
-#define VERSION "2.12"
+#define VERSION "2.13"
/* Bluetooth sockets */
#define BT_MAX_PROTO 8
/* Create SCO or ACL connection.
* Device _must_ be locked */
-struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst)
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 auth_type)
{
struct hci_conn *acl;
struct hci_conn *sco;
hci_conn_hold(acl);
- if (acl->state == BT_OPEN || acl->state == BT_CLOSED)
+ if (acl->state == BT_OPEN || acl->state == BT_CLOSED) {
+ acl->auth_type = auth_type;
hci_acl_connect(acl);
+ }
if (type == ACL_LINK)
return acl;
}
EXPORT_SYMBOL(hci_connect);
+/* Check link security requirement */
+int hci_conn_check_link_mode(struct hci_conn *conn)
+{
+ BT_DBG("conn %p", conn);
+
+ if (conn->ssp_mode > 0 && conn->hdev->ssp_mode > 0 &&
+ !(conn->link_mode & HCI_LM_ENCRYPT))
+ return 0;
+
+ return 1;
+}
+EXPORT_SYMBOL(hci_conn_check_link_mode);
+
/* Authenticate remote device */
int hci_conn_auth(struct hci_conn *conn)
{
if (conn->ssp_mode > 0 && conn->hdev->ssp_mode > 0) {
if (!(conn->auth_type & 0x01)) {
- conn->auth_type = HCI_AT_GENERAL_BONDING_MITM;
+ conn->auth_type |= 0x01;
conn->link_mode &= ~HCI_LM_AUTH;
}
}
{
int ret;
+ if (!test_bit(HCI_UP, &hdev->flags))
+ return -ENETDOWN;
+
/* Serialize all requests */
hci_req_lock(hdev);
ret = __hci_request(hdev, req, opt, timeout);
if (conn->state == BT_CONFIG) {
if (!ev->status && hdev->ssp_mode > 0 &&
- conn->ssp_mode > 0) {
- if (conn->out) {
- struct hci_cp_auth_requested cp;
- cp.handle = ev->handle;
- hci_send_cmd(hdev,
- HCI_OP_AUTH_REQUESTED,
+ conn->ssp_mode > 0 && conn->out) {
+ struct hci_cp_auth_requested cp;
+ cp.handle = ev->handle;
+ hci_send_cmd(hdev, HCI_OP_AUTH_REQUESTED,
sizeof(cp), &cp);
- }
} else {
conn->state = BT_CONNECTED;
hci_proto_connect_cfm(conn, ev->status);
#define BT_DBG(D...)
#endif
-#define VERSION "2.10"
+#define VERSION "2.11"
static u32 l2cap_feat_mask = 0x0000;
struct l2cap_conn *conn;
struct hci_conn *hcon;
struct hci_dev *hdev;
+ __u8 auth_type;
int err = 0;
BT_DBG("%s -> %s psm 0x%2.2x", batostr(src), batostr(dst), l2cap_pi(sk)->psm);
err = -ENOMEM;
- hcon = hci_connect(hdev, ACL_LINK, dst);
+ if (l2cap_pi(sk)->link_mode & L2CAP_LM_AUTH ||
+ l2cap_pi(sk)->link_mode & L2CAP_LM_ENCRYPT ||
+ l2cap_pi(sk)->link_mode & L2CAP_LM_SECURE) {
+ if (l2cap_pi(sk)->psm == cpu_to_le16(0x0001))
+ auth_type = HCI_AT_NO_BONDING_MITM;
+ else
+ auth_type = HCI_AT_GENERAL_BONDING_MITM;
+ } else {
+ if (l2cap_pi(sk)->psm == cpu_to_le16(0x0001))
+ auth_type = HCI_AT_NO_BONDING;
+ else
+ auth_type = HCI_AT_GENERAL_BONDING;
+ }
+
+ hcon = hci_connect(hdev, ACL_LINK, dst, auth_type);
if (!hcon)
goto done;
struct l2cap_conn_req *req = (struct l2cap_conn_req *) data;
struct l2cap_conn_rsp rsp;
struct sock *sk, *parent;
- int result, status = 0;
+ int result, status = L2CAP_CS_NO_INFO;
u16 dcid = 0, scid = __le16_to_cpu(req->scid);
- __le16 psm = req->psm;
+ __le16 psm = req->psm;
BT_DBG("psm 0x%2.2x scid 0x%4.4x", psm, scid);
goto sendresp;
}
+ /* Check if the ACL is secure enough (if not SDP) */
+ if (psm != cpu_to_le16(0x0001) &&
+ !hci_conn_check_link_mode(conn->hcon)) {
+ result = L2CAP_CR_SEC_BLOCK;
+ goto response;
+ }
+
result = L2CAP_CR_NO_MEM;
/* Check for backlog size */
rsp.scid = cpu_to_le16(l2cap_pi(sk)->dcid);
rsp.dcid = cpu_to_le16(l2cap_pi(sk)->scid);
rsp.result = cpu_to_le16(result);
- rsp.status = cpu_to_le16(0);
+ rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
L2CAP_CONN_RSP, sizeof(rsp), &rsp);
}
rsp.scid = cpu_to_le16(l2cap_pi(sk)->dcid);
rsp.dcid = cpu_to_le16(l2cap_pi(sk)->scid);
rsp.result = cpu_to_le16(result);
- rsp.status = cpu_to_le16(0);
+ rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
l2cap_send_cmd(conn, l2cap_pi(sk)->ident,
L2CAP_CONN_RSP, sizeof(rsp), &rsp);
}
else
type = SCO_LINK;
- hcon = hci_connect(hdev, type, dst);
+ hcon = hci_connect(hdev, type, dst, HCI_AT_NO_BONDING);
if (!hcon)
goto done;
return 0;
case BRCTL_SET_BRIDGE_HELLO_TIME:
+ {
+ unsigned long t = clock_t_to_jiffies(args[1]);
if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ if (t < HZ)
+ return -EINVAL;
+
spin_lock_bh(&br->lock);
- br->bridge_hello_time = clock_t_to_jiffies(args[1]);
+ br->bridge_hello_time = t;
if (br_is_root_bridge(br))
br->hello_time = br->bridge_hello_time;
spin_unlock_bh(&br->lock);
return 0;
+ }
case BRCTL_SET_BRIDGE_MAX_AGE:
if (!capable(CAP_NET_ADMIN))
*/
static ssize_t store_bridge_parm(struct device *d,
const char *buf, size_t len,
- void (*set)(struct net_bridge *, unsigned long))
+ int (*set)(struct net_bridge *, unsigned long))
{
struct net_bridge *br = to_bridge(d);
char *endp;
unsigned long val;
+ int err;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
return -EINVAL;
spin_lock_bh(&br->lock);
- (*set)(br, val);
+ err = (*set)(br, val);
spin_unlock_bh(&br->lock);
- return len;
+ return err ? err : len;
}
return sprintf(buf, "%lu\n", jiffies_to_clock_t(br->forward_delay));
}
-static void set_forward_delay(struct net_bridge *br, unsigned long val)
+static int set_forward_delay(struct net_bridge *br, unsigned long val)
{
unsigned long delay = clock_t_to_jiffies(val);
br->forward_delay = delay;
if (br_is_root_bridge(br))
br->bridge_forward_delay = delay;
+ return 0;
}
static ssize_t store_forward_delay(struct device *d,
jiffies_to_clock_t(to_bridge(d)->hello_time));
}
-static void set_hello_time(struct net_bridge *br, unsigned long val)
+static int set_hello_time(struct net_bridge *br, unsigned long val)
{
unsigned long t = clock_t_to_jiffies(val);
+
+ if (t < HZ)
+ return -EINVAL;
+
br->hello_time = t;
if (br_is_root_bridge(br))
br->bridge_hello_time = t;
+ return 0;
}
static ssize_t store_hello_time(struct device *d,
jiffies_to_clock_t(to_bridge(d)->max_age));
}
-static void set_max_age(struct net_bridge *br, unsigned long val)
+static int set_max_age(struct net_bridge *br, unsigned long val)
{
unsigned long t = clock_t_to_jiffies(val);
br->max_age = t;
if (br_is_root_bridge(br))
br->bridge_max_age = t;
+ return 0;
}
static ssize_t store_max_age(struct device *d, struct device_attribute *attr,
return sprintf(buf, "%lu\n", jiffies_to_clock_t(br->ageing_time));
}
-static void set_ageing_time(struct net_bridge *br, unsigned long val)
+static int set_ageing_time(struct net_bridge *br, unsigned long val)
{
br->ageing_time = clock_t_to_jiffies(val);
+ return 0;
}
static ssize_t store_ageing_time(struct device *d,
(br->bridge_id.prio[0] << 8) | br->bridge_id.prio[1]);
}
-static void set_priority(struct net_bridge *br, unsigned long val)
+static int set_priority(struct net_bridge *br, unsigned long val)
{
br_stp_set_bridge_priority(br, (u16) val);
+ return 0;
}
static ssize_t store_priority(struct device *d, struct device_attribute *attr,
#include <linux/if_arp.h>
#include <linux/if_vlan.h>
#include <linux/ip.h>
+#include <net/ip.h>
#include <linux/ipv6.h>
#include <linux/in.h>
#include <linux/jhash.h>
{
u32 addr1, addr2, ports;
u32 hash, ihl;
- u8 ip_proto;
+ u8 ip_proto = 0;
if (unlikely(!simple_tx_hashrnd_initialized)) {
get_random_bytes(&simple_tx_hashrnd, 4);
switch (skb->protocol) {
case __constant_htons(ETH_P_IP):
- ip_proto = ip_hdr(skb)->protocol;
+ if (!(ip_hdr(skb)->frag_off & htons(IP_MF | IP_OFFSET)))
+ ip_proto = ip_hdr(skb)->protocol;
addr1 = ip_hdr(skb)->saddr;
addr2 = ip_hdr(skb)->daddr;
ihl = ip_hdr(skb)->ihl;
spin_unlock(root_lock);
} else {
if (!test_bit(__QDISC_STATE_DEACTIVATED,
- &q->state))
+ &q->state)) {
__netif_reschedule(q);
+ } else {
+ smp_mb__before_clear_bit();
+ clear_bit(__QDISC_STATE_SCHED,
+ &q->state);
+ }
}
}
}
}
}
+static inline bool inetdev_valid_mtu(unsigned mtu)
+{
+ return mtu >= 68;
+}
+
/* Called only under RTNL semaphore */
static int inetdev_event(struct notifier_block *this, unsigned long event,
IN_DEV_CONF_SET(in_dev, NOXFRM, 1);
IN_DEV_CONF_SET(in_dev, NOPOLICY, 1);
}
+ } else if (event == NETDEV_CHANGEMTU) {
+ /* Re-enabling IP */
+ if (inetdev_valid_mtu(dev->mtu))
+ in_dev = inetdev_init(dev);
}
goto out;
}
dev->ip_ptr = NULL;
break;
case NETDEV_UP:
- if (dev->mtu < 68)
+ if (!inetdev_valid_mtu(dev->mtu))
break;
if (dev->flags & IFF_LOOPBACK) {
struct in_ifaddr *ifa;
ip_mc_down(in_dev);
break;
case NETDEV_CHANGEMTU:
- if (dev->mtu >= 68)
+ if (inetdev_valid_mtu(dev->mtu))
break;
- /* MTU falled under 68, disable IP */
+ /* disable IP when MTU is not enough */
case NETDEV_UNREGISTER:
inetdev_destroy(in_dev);
break;
}
EXPORT_SYMBOL_GPL(inet_twdr_twcal_tick);
+
+void inet_twsk_purge(struct net *net, struct inet_hashinfo *hashinfo,
+ struct inet_timewait_death_row *twdr, int family)
+{
+ struct inet_timewait_sock *tw;
+ struct sock *sk;
+ struct hlist_node *node;
+ int h;
+
+ local_bh_disable();
+ for (h = 0; h < (hashinfo->ehash_size); h++) {
+ struct inet_ehash_bucket *head =
+ inet_ehash_bucket(hashinfo, h);
+ rwlock_t *lock = inet_ehash_lockp(hashinfo, h);
+restart:
+ write_lock(lock);
+ sk_for_each(sk, node, &head->twchain) {
+
+ tw = inet_twsk(sk);
+ if (!net_eq(twsk_net(tw), net) ||
+ tw->tw_family != family)
+ continue;
+
+ atomic_inc(&tw->tw_refcnt);
+ write_unlock(lock);
+ inet_twsk_deschedule(tw, twdr);
+ inet_twsk_put(tw);
+
+ goto restart;
+ }
+ write_unlock(lock);
+ }
+ local_bh_enable();
+}
+EXPORT_SYMBOL_GPL(inet_twsk_purge);
static struct ctl_table ipv4_skeleton[] =
{
{ .procname = "route", .ctl_name = NET_IPV4_ROUTE,
- .child = ipv4_route_table},
+ .mode = 0555, .child = ipv4_route_table},
{ .procname = "neigh", .ctl_name = NET_IPV4_NEIGH,
- .child = empty},
+ .mode = 0555, .child = empty},
{ }
};
];
} rep;
struct ip_reply_arg arg;
- struct net *net = dev_net(skb->dev);
+ struct net *net = dev_net(skb->dst->dev);
memset(&rep.th, 0, sizeof(struct tcphdr));
memset(&arg, 0, sizeof(arg));
static void __net_exit tcp_sk_exit(struct net *net)
{
inet_ctl_sock_destroy(net->ipv4.tcp_sock);
+ inet_twsk_purge(net, &tcp_hashinfo, &tcp_death_row, AF_INET);
}
static struct pernet_operations __net_initdata tcp_sk_ops = {
}
if (likely(sysctl_tcp_window_scaling)) {
opts->ws = tp->rx_opt.rcv_wscale;
- size += TCPOLEN_WSCALE_ALIGNED;
+ if(likely(opts->ws))
+ size += TCPOLEN_WSCALE_ALIGNED;
}
if (likely(sysctl_tcp_sack)) {
opts->options |= OPTION_SACK_ADVERTISE;
if (likely(ireq->wscale_ok)) {
opts->ws = ireq->rcv_wscale;
- size += TCPOLEN_WSCALE_ALIGNED;
+ if(likely(opts->ws))
+ size += TCPOLEN_WSCALE_ALIGNED;
}
if (likely(doing_ts)) {
opts->options |= OPTION_TS;
return 0;
}
+static int __udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
+{
+ int is_udplite = IS_UDPLITE(sk);
+ int rc;
+
+ if ((rc = sock_queue_rcv_skb(sk, skb)) < 0) {
+ /* Note that an ENOMEM error is charged twice */
+ if (rc == -ENOMEM)
+ UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_RCVBUFERRORS,
+ is_udplite);
+ goto drop;
+ }
+
+ return 0;
+
+drop:
+ UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
+ kfree_skb(skb);
+ return -1;
+}
+
/* returns:
* -1: error
* 0: success
up->encap_rcv != NULL) {
int ret;
- bh_unlock_sock(sk);
ret = (*up->encap_rcv)(sk, skb);
- bh_lock_sock(sk);
if (ret <= 0) {
UDP_INC_STATS_BH(sock_net(sk),
UDP_MIB_INDATAGRAMS,
goto drop;
}
- if ((rc = sock_queue_rcv_skb(sk,skb)) < 0) {
- /* Note that an ENOMEM error is charged twice */
- if (rc == -ENOMEM) {
- UDP_INC_STATS_BH(sock_net(sk),
- UDP_MIB_RCVBUFERRORS, is_udplite);
- atomic_inc(&sk->sk_drops);
- }
- goto drop;
- }
+ rc = 0;
- return 0;
+ bh_lock_sock(sk);
+ if (!sock_owned_by_user(sk))
+ rc = __udp_queue_rcv_skb(sk, skb);
+ else
+ sk_add_backlog(sk, skb);
+ bh_unlock_sock(sk);
+
+ return rc;
drop:
UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
skb1 = skb_clone(skb, GFP_ATOMIC);
if (skb1) {
- int ret = 0;
-
- bh_lock_sock(sk);
- if (!sock_owned_by_user(sk))
- ret = udp_queue_rcv_skb(sk, skb1);
- else
- sk_add_backlog(sk, skb1);
- bh_unlock_sock(sk);
-
+ int ret = udp_queue_rcv_skb(sk, skb1);
if (ret > 0)
/* we should probably re-process instead
* of dropping packets here. */
uh->dest, inet_iif(skb), udptable);
if (sk != NULL) {
- int ret = 0;
- bh_lock_sock(sk);
- if (!sock_owned_by_user(sk))
- ret = udp_queue_rcv_skb(sk, skb);
- else
- sk_add_backlog(sk, skb);
- bh_unlock_sock(sk);
+ int ret = udp_queue_rcv_skb(sk, skb);
sock_put(sk);
/* a return value > 0 means to resubmit the input, but
.sendmsg = udp_sendmsg,
.recvmsg = udp_recvmsg,
.sendpage = udp_sendpage,
- .backlog_rcv = udp_queue_rcv_skb,
+ .backlog_rcv = __udp_queue_rcv_skb,
.hash = udp_lib_hash,
.unhash = udp_lib_unhash,
.get_port = udp_v4_get_port,
}
#ifdef CONFIG_IPV6_OPTIMISTIC_DAD
- /*
- * Here if the dst entry we've looked up
- * has a neighbour entry that is in the INCOMPLETE
- * state and the src address from the flow is
- * marked as OPTIMISTIC, we release the found
- * dst entry and replace it instead with the
- * dst entry of the nexthop router
- */
- if (!((*dst)->neighbour->nud_state & NUD_VALID)) {
- struct inet6_ifaddr *ifp;
- struct flowi fl_gw;
- int redirect;
-
- ifp = ipv6_get_ifaddr(net, &fl->fl6_src,
- (*dst)->dev, 1);
-
- redirect = (ifp && ifp->flags & IFA_F_OPTIMISTIC);
- if (ifp)
- in6_ifa_put(ifp);
-
- if (redirect) {
- /*
- * We need to get the dst entry for the
- * default router instead
- */
- dst_release(*dst);
- memcpy(&fl_gw, fl, sizeof(struct flowi));
- memset(&fl_gw.fl6_dst, 0, sizeof(struct in6_addr));
- *dst = ip6_route_output(net, sk, &fl_gw);
- if ((err = (*dst)->error))
- goto out_err_release;
- }
+ /*
+ * Here if the dst entry we've looked up
+ * has a neighbour entry that is in the INCOMPLETE
+ * state and the src address from the flow is
+ * marked as OPTIMISTIC, we release the found
+ * dst entry and replace it instead with the
+ * dst entry of the nexthop router
+ */
+ if ((*dst)->neighbour && !((*dst)->neighbour->nud_state & NUD_VALID)) {
+ struct inet6_ifaddr *ifp;
+ struct flowi fl_gw;
+ int redirect;
+
+ ifp = ipv6_get_ifaddr(net, &fl->fl6_src,
+ (*dst)->dev, 1);
+
+ redirect = (ifp && ifp->flags & IFA_F_OPTIMISTIC);
+ if (ifp)
+ in6_ifa_put(ifp);
+
+ if (redirect) {
+ /*
+ * We need to get the dst entry for the
+ * default router instead
+ */
+ dst_release(*dst);
+ memcpy(&fl_gw, fl, sizeof(struct flowi));
+ memset(&fl_gw.fl6_dst, 0, sizeof(struct in6_addr));
+ *dst = ip6_route_output(net, sk, &fl_gw);
+ if ((err = (*dst)->error))
+ goto out_err_release;
}
+ }
#endif
return 0;
hdrlen -= 2;
if (!(optinfo->flags & IP6T_OPTS_OPTS)) {
return ret;
- } else if (optinfo->flags & IP6T_OPTS_NSTRICT) {
- pr_debug("Not strict - not implemented");
} else {
pr_debug("Strict ");
pr_debug("#%d ", optinfo->optsnr);
pr_debug("ip6t_opts: unknown flags %X\n", optsinfo->invflags);
return false;
}
+
+ if (optsinfo->flags & IP6T_OPTS_NSTRICT) {
+ pr_debug("ip6t_opts: Not strict - not implemented");
+ return false;
+ }
+
return true;
}
skb_checksum_complete(skb)) {
atomic_inc(&sk->sk_drops);
kfree_skb(skb);
- return 0;
+ return NET_RX_DROP;
}
/* Charge it to the socket. */
if (sock_queue_rcv_skb(sk,skb)<0) {
atomic_inc(&sk->sk_drops);
kfree_skb(skb);
- return 0;
+ return NET_RX_DROP;
}
return 0;
if (skb_checksum_complete(skb)) {
atomic_inc(&sk->sk_drops);
kfree_skb(skb);
- return 0;
+ return NET_RX_DROP;
}
}
if (ret)
goto out_kmem_cache;
+ ip6_dst_blackhole_ops.kmem_cachep = ip6_dst_ops_template.kmem_cachep;
+
/* Registering of the loopback is done before this portion of code,
* the loopback reference in rt6_info will not be taken, do it
* manually for init_net */
struct tcphdr *th = tcp_hdr(skb), *t1;
struct sk_buff *buff;
struct flowi fl;
- struct net *net = dev_net(skb->dev);
+ struct net *net = dev_net(skb->dst->dev);
struct sock *ctl_sk = net->ipv6.tcp_sk;
unsigned int tot_len = sizeof(struct tcphdr);
__be32 *topt;
static void tcpv6_net_exit(struct net *net)
{
inet_ctl_sock_destroy(net->ipv6.tcp_sk);
+ inet_twsk_purge(net, &tcp_hashinfo, &tcp_death_row, AF_INET6);
}
static struct pernet_operations tcpv6_net_ops = {
get_online_cpus();
for_each_online_cpu(cpu)
smp_call_function_single(cpu, iucv_declare_cpu, NULL, 1);
- preempt_enable();
if (cpus_empty(iucv_buffer_cpumask))
/* No cpu could declare an iucv buffer. */
goto out_path;
*/
static void iucv_disable(void)
{
+ get_online_cpus();
on_each_cpu(iucv_retrieve_cpu, NULL, 1);
+ put_online_cpus();
kfree(iucv_path_table);
}
return 0;
}
-static int pfkey_do_dump(struct pfkey_sock *pfk)
+static void pfkey_terminate_dump(struct pfkey_sock *pfk)
{
- int rc;
-
- rc = pfk->dump.dump(pfk);
- if (rc == -ENOBUFS)
- return 0;
-
- pfk->dump.done(pfk);
- pfk->dump.dump = NULL;
- pfk->dump.done = NULL;
- return rc;
+ if (pfk->dump.dump) {
+ pfk->dump.done(pfk);
+ pfk->dump.dump = NULL;
+ pfk->dump.done = NULL;
+ }
}
static void pfkey_sock_destruct(struct sock *sk)
{
+ pfkey_terminate_dump(pfkey_sk(sk));
skb_queue_purge(&sk->sk_receive_queue);
if (!sock_flag(sk, SOCK_DEAD)) {
return err;
}
+static int pfkey_do_dump(struct pfkey_sock *pfk)
+{
+ int rc;
+
+ rc = pfk->dump.dump(pfk);
+ if (rc == -ENOBUFS)
+ return 0;
+
+ pfkey_terminate_dump(pfk);
+ return rc;
+}
+
static inline void pfkey_hdr_dup(struct sadb_msg *new, struct sadb_msg *orig)
{
*new = *orig;
key = sdata->default_key;
if (key) {
sprintf(buf, "../keys/%d", key->debugfs.cnt);
- sdata->debugfs.default_key =
+ sdata->common_debugfs.default_key =
debugfs_create_symlink("default_key",
sdata->debugfsdir, buf);
} else
if (!sdata)
return;
- debugfs_remove(sdata->debugfs.default_key);
- sdata->debugfs.default_key = NULL;
+ debugfs_remove(sdata->common_debugfs.default_key);
+ sdata->common_debugfs.default_key = NULL;
}
void ieee80211_debugfs_key_sta_del(struct ieee80211_key *key,
static void add_sta_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(drop_unencrypted, sta);
- DEBUGFS_ADD(force_unicast_rateidx, ap);
- DEBUGFS_ADD(max_ratectrl_rateidx, ap);
+ DEBUGFS_ADD(force_unicast_rateidx, sta);
+ DEBUGFS_ADD(max_ratectrl_rateidx, sta);
DEBUGFS_ADD(state, sta);
DEBUGFS_ADD(bssid, sta);
static void add_wds_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(drop_unencrypted, wds);
- DEBUGFS_ADD(force_unicast_rateidx, ap);
- DEBUGFS_ADD(max_ratectrl_rateidx, ap);
+ DEBUGFS_ADD(force_unicast_rateidx, wds);
+ DEBUGFS_ADD(max_ratectrl_rateidx, wds);
DEBUGFS_ADD(peer, wds);
}
static void add_vlan_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(drop_unencrypted, vlan);
- DEBUGFS_ADD(force_unicast_rateidx, ap);
- DEBUGFS_ADD(max_ratectrl_rateidx, ap);
+ DEBUGFS_ADD(force_unicast_rateidx, vlan);
+ DEBUGFS_ADD(max_ratectrl_rateidx, vlan);
}
static void add_monitor_files(struct ieee80211_sub_if_data *sdata)
static void del_sta_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_DEL(drop_unencrypted, sta);
- DEBUGFS_DEL(force_unicast_rateidx, ap);
- DEBUGFS_DEL(max_ratectrl_rateidx, ap);
+ DEBUGFS_DEL(force_unicast_rateidx, sta);
+ DEBUGFS_DEL(max_ratectrl_rateidx, sta);
DEBUGFS_DEL(state, sta);
DEBUGFS_DEL(bssid, sta);
static void del_wds_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_DEL(drop_unencrypted, wds);
- DEBUGFS_DEL(force_unicast_rateidx, ap);
- DEBUGFS_DEL(max_ratectrl_rateidx, ap);
+ DEBUGFS_DEL(force_unicast_rateidx, wds);
+ DEBUGFS_DEL(max_ratectrl_rateidx, wds);
DEBUGFS_DEL(peer, wds);
}
static void del_vlan_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_DEL(drop_unencrypted, vlan);
- DEBUGFS_DEL(force_unicast_rateidx, ap);
- DEBUGFS_DEL(max_ratectrl_rateidx, ap);
+ DEBUGFS_DEL(force_unicast_rateidx, vlan);
+ DEBUGFS_DEL(max_ratectrl_rateidx, vlan);
}
static void del_monitor_files(struct ieee80211_sub_if_data *sdata)
struct dentry *auth_transaction;
struct dentry *flags;
struct dentry *num_beacons_sta;
+ struct dentry *force_unicast_rateidx;
+ struct dentry *max_ratectrl_rateidx;
} sta;
struct {
struct dentry *drop_unencrypted;
struct {
struct dentry *drop_unencrypted;
struct dentry *peer;
+ struct dentry *force_unicast_rateidx;
+ struct dentry *max_ratectrl_rateidx;
} wds;
struct {
struct dentry *drop_unencrypted;
+ struct dentry *force_unicast_rateidx;
+ struct dentry *max_ratectrl_rateidx;
} vlan;
struct {
struct dentry *mode;
} monitor;
- struct dentry *default_key;
} debugfs;
+ struct {
+ struct dentry *default_key;
+ } common_debugfs;
#ifdef CONFIG_MAC80211_MESH
struct dentry *mesh_stats_dir;
hlist_for_each_safe(p, q, &newtbl->hash_buckets[i])
tbl->free_node(p, 0);
}
- __mesh_table_free(tbl);
+ __mesh_table_free(newtbl);
endgrow:
return NULL;
}
}
}
- if (count == 8) {
+ if (rates_len > count) {
pos = skb_put(skb, rates_len - count + 2);
*pos++ = WLAN_EID_EXT_SUPP_RATES;
*pos++ = rates_len - count;
jiffies);
#endif /* CONFIG_MAC80211_IBSS_DEBUG */
if (beacon_timestamp > rx_timestamp) {
-#ifndef CONFIG_MAC80211_IBSS_DEBUG
+#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG "%s: beacon TSF higher than "
"local TSF - IBSS merge with BSSID %s\n",
dev->name, print_mac(mac, mgmt->bssid));
static int parse_dcc(char *data, const char *data_end, u_int32_t *ip,
u_int16_t *port, char **ad_beg_p, char **ad_end_p)
{
+ char *tmp;
+
/* at least 12: "AAAAAAAA P\1\n" */
while (*data++ != ' ')
if (data > data_end - 12)
return -1;
+ /* Make sure we have a newline character within the packet boundaries
+ * because simple_strtoul parses until the first invalid character. */
+ for (tmp = data; tmp <= data_end; tmp++)
+ if (*tmp == '\n')
+ break;
+ if (tmp > data_end || *tmp != '\n')
+ return -1;
+
*ad_beg_p = data;
*ip = simple_strtoul(data, &data, 10);
void nf_ct_gre_keymap_flush(void)
{
- struct list_head *pos, *n;
+ struct nf_ct_gre_keymap *km, *tmp;
write_lock_bh(&nf_ct_gre_lock);
- list_for_each_safe(pos, n, &gre_keymap_list) {
- list_del(pos);
- kfree(pos);
+ list_for_each_entry_safe(km, tmp, &gre_keymap_list, list) {
+ list_del(&km->list);
+ kfree(km);
}
write_unlock_bh(&nf_ct_gre_lock);
}
kmp = &help->help.ct_pptp_info.keymap[dir];
if (*kmp) {
/* check whether it's a retransmission */
+ read_lock_bh(&nf_ct_gre_lock);
list_for_each_entry(km, &gre_keymap_list, list) {
- if (gre_key_cmpfn(km, t) && km == *kmp)
+ if (gre_key_cmpfn(km, t) && km == *kmp) {
+ read_unlock_bh(&nf_ct_gre_lock);
return 0;
+ }
}
+ read_unlock_bh(&nf_ct_gre_lock);
pr_debug("trying to override keymap_%s for ct %p\n",
dir == IP_CT_DIR_REPLY ? "reply" : "orig", ct);
return -EEXIST;
static int process_sip_response(struct sk_buff *skb,
const char **dptr, unsigned int *datalen)
{
- static const struct sip_handler *handler;
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
unsigned int matchoff, matchlen;
dataoff = matchoff + matchlen + 1;
for (i = 0; i < ARRAY_SIZE(sip_handlers); i++) {
+ const struct sip_handler *handler;
+
handler = &sip_handlers[i];
if (handler->response == NULL)
continue;
static int process_sip_request(struct sk_buff *skb,
const char **dptr, unsigned int *datalen)
{
- static const struct sip_handler *handler;
enum ip_conntrack_info ctinfo;
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
unsigned int matchoff, matchlen;
unsigned int cseq, i;
for (i = 0; i < ARRAY_SIZE(sip_handlers); i++) {
+ const struct sip_handler *handler;
+
handler = &sip_handlers[i];
if (handler->request == NULL)
continue;
{
struct rfkill *rfkill = to_rfkill(dev);
- return sprintf(buf, "%d", rfkill->user_claim);
+ return sprintf(buf, "%d\n", rfkill->user_claim);
}
static ssize_t rfkill_claim_store(struct device *dev,
}
}
- root_lock = qdisc_root_lock(q);
+ root_lock = qdisc_root_sleeping_lock(q);
if (tp == NULL) {
/* Proto-tcf does not exist, create new one */
static inline
void route4_reset_fastmap(struct Qdisc *q, struct route4_head *head, u32 id)
{
- spinlock_t *root_lock = qdisc_root_lock(q);
+ spinlock_t *root_lock = qdisc_root_sleeping_lock(q);
spin_lock_bh(root_lock);
memset(head->fastmap, 0, sizeof(head->fastmap));
struct Qdisc *oqdisc = dev_queue->qdisc_sleeping;
spinlock_t *root_lock;
- root_lock = qdisc_root_lock(oqdisc);
+ root_lock = qdisc_lock(oqdisc);
spin_lock_bh(root_lock);
/* Prune old scheduler */
if (qdisc == NULL)
qdisc = &noop_qdisc;
dev_queue->qdisc_sleeping = qdisc;
- dev_queue->qdisc = &noop_qdisc;
+ rcu_assign_pointer(dev_queue->qdisc, &noop_qdisc);
spin_unlock_bh(root_lock);
sch->stab = stab;
}
if (tca[TCA_RATE]) {
+ spinlock_t *root_lock;
+
+ if ((sch->parent != TC_H_ROOT) &&
+ !(sch->flags & TCQ_F_INGRESS))
+ root_lock = qdisc_root_sleeping_lock(sch);
+ else
+ root_lock = qdisc_lock(sch);
+
err = gen_new_estimator(&sch->bstats, &sch->rate_est,
- qdisc_root_lock(sch),
- tca[TCA_RATE]);
+ root_lock, tca[TCA_RATE]);
if (err) {
/*
* Any broken qdiscs that would require
if (tca[TCA_RATE])
gen_replace_estimator(&sch->bstats, &sch->rate_est,
- qdisc_root_lock(sch), tca[TCA_RATE]);
+ qdisc_root_sleeping_lock(sch),
+ tca[TCA_RATE]);
return 0;
}
if (q->stab && qdisc_dump_stab(skb, q->stab) < 0)
goto nla_put_failure;
- if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS,
- TCA_XSTATS, qdisc_root_lock(q), &d) < 0)
+ if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS, TCA_XSTATS,
+ qdisc_root_sleeping_lock(q), &d) < 0)
goto nla_put_failure;
if (q->ops->dump_stats && q->ops->dump_stats(q, &d) < 0)
if (cl_ops->dump && cl_ops->dump(q, cl, skb, tcm) < 0)
goto nla_put_failure;
- if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS,
- TCA_XSTATS, qdisc_root_lock(q), &d) < 0)
+ if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS, TCA_XSTATS,
+ qdisc_root_sleeping_lock(q), &d) < 0)
goto nla_put_failure;
if (cl_ops->dump_stats && cl_ops->dump_stats(q, cl, &d) < 0)
if (--cl->refcnt == 0) {
#ifdef CONFIG_NET_CLS_ACT
- spinlock_t *root_lock = qdisc_root_lock(sch);
+ spinlock_t *root_lock = qdisc_root_sleeping_lock(sch);
struct cbq_sched_data *q = qdisc_priv(sch);
spin_lock_bh(root_lock);
if (tca[TCA_RATE])
gen_replace_estimator(&cl->bstats, &cl->rate_est,
- qdisc_root_lock(sch),
+ qdisc_root_sleeping_lock(sch),
tca[TCA_RATE]);
return 0;
}
if (tca[TCA_RATE])
gen_new_estimator(&cl->bstats, &cl->rate_est,
- qdisc_root_lock(sch), tca[TCA_RATE]);
+ qdisc_root_sleeping_lock(sch), tca[TCA_RATE]);
*arg = (unsigned long)cl;
return 0;
time_after(jiffies, (dev->trans_start +
dev->watchdog_timeo))) {
char drivername[64];
- printk(KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit timed out\n",
+ WARN_ONCE(1, KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit timed out\n",
dev->name, netdev_drivername(dev, drivername, 64));
dev->tx_timeout(dev);
- WARN_ON_ONCE(1);
}
if (!mod_timer(&dev->watchdog_timer,
round_jiffies(jiffies +
if (!(qdisc->flags & TCQ_F_BUILTIN))
set_bit(__QDISC_STATE_DEACTIVATED, &qdisc->state);
- dev_queue->qdisc = qdisc_default;
+ rcu_assign_pointer(dev_queue->qdisc, qdisc_default);
qdisc_reset(qdisc);
spin_unlock_bh(qdisc_lock(qdisc));
struct Qdisc *qdisc_default = _qdisc_default;
if (qdisc) {
- dev_queue->qdisc = qdisc_default;
+ rcu_assign_pointer(dev_queue->qdisc, qdisc_default);
dev_queue->qdisc_sleeping = qdisc_default;
qdisc_destroy(qdisc);
if (tca[TCA_RATE])
gen_replace_estimator(&cl->bstats, &cl->rate_est,
- qdisc_root_lock(sch),
+ qdisc_root_sleeping_lock(sch),
tca[TCA_RATE]);
return 0;
}
if (tca[TCA_RATE])
gen_new_estimator(&cl->bstats, &cl->rate_est,
- qdisc_root_lock(sch), tca[TCA_RATE]);
+ qdisc_root_sleeping_lock(sch), tca[TCA_RATE]);
*arg = (unsigned long)cl;
return 0;
}
static int htb_dump(struct Qdisc *sch, struct sk_buff *skb)
{
- spinlock_t *root_lock = qdisc_root_lock(sch);
+ spinlock_t *root_lock = qdisc_root_sleeping_lock(sch);
struct htb_sched *q = qdisc_priv(sch);
struct nlattr *nest;
struct tc_htb_glob gopt;
struct sk_buff *skb, struct tcmsg *tcm)
{
struct htb_class *cl = (struct htb_class *)arg;
- spinlock_t *root_lock = qdisc_root_lock(sch);
+ spinlock_t *root_lock = qdisc_root_sleeping_lock(sch);
struct nlattr *nest;
struct tc_htb_opt opt;
goto failure;
gen_new_estimator(&cl->bstats, &cl->rate_est,
- qdisc_root_lock(sch),
+ qdisc_root_sleeping_lock(sch),
tca[TCA_RATE] ? : &est.nla);
cl->refcnt = 1;
cl->children = 0;
} else {
if (tca[TCA_RATE])
gen_replace_estimator(&cl->bstats, &cl->rate_est,
- qdisc_root_lock(sch),
+ qdisc_root_sleeping_lock(sch),
tca[TCA_RATE]);
sch_tree_lock(sch);
}
for (i = 0; i < n; i++)
d->table[i] = data[i];
- root_lock = qdisc_root_lock(sch);
+ root_lock = qdisc_root_sleeping_lock(sch);
spin_lock_bh(root_lock);
d = xchg(&q->delay_dist, d);
txq = netdev_get_tx_queue(master->dev, 0);
master->slaves = NULL;
- root_lock = qdisc_root_lock(txq->qdisc);
+ root_lock = qdisc_root_sleeping_lock(txq->qdisc);
spin_lock_bh(root_lock);
qdisc_reset(txq->qdisc);
spin_unlock_bh(root_lock);
/* Check to see if this is a duplicate. */
peer = sctp_assoc_lookup_paddr(asoc, addr);
if (peer) {
+ /* An UNKNOWN state is only set on transports added by
+ * user in sctp_connectx() call. Such transports should be
+ * considered CONFIRMED per RFC 4960, Section 5.4.
+ */
if (peer->state == SCTP_UNKNOWN) {
- if (peer_state == SCTP_ACTIVE)
- peer->state = SCTP_ACTIVE;
- if (peer_state == SCTP_UNCONFIRMED)
- peer->state = SCTP_UNCONFIRMED;
+ peer->state = SCTP_ACTIVE;
}
return peer;
}
for (i = 0; i < hmacs->shmac_num_idents; i++) {
id = hmacs->shmac_idents[i];
+ if (id > SCTP_AUTH_HMAC_ID_MAX)
+ return -EOPNOTSUPP;
+
if (SCTP_AUTH_HMAC_ID_SHA1 == id)
has_sha1 = 1;
if (!(dst->dev->features & NETIF_F_NO_CSUM)) {
crc32 = sctp_start_cksum((__u8 *)sh, cksum_buf_len);
crc32 = sctp_end_cksum(crc32);
- }
+ } else
+ nskb->ip_summed = CHECKSUM_UNNECESSARY;
/* 3) Put the resultant value into the checksum field in the
* common header, and leave the rest of the bits unchanged.
return retval;
}
+struct sctp_chunk *sctp_make_violation_paramlen(
+ const struct sctp_association *asoc,
+ const struct sctp_chunk *chunk,
+ struct sctp_paramhdr *param)
+{
+ struct sctp_chunk *retval;
+ static const char error[] = "The following parameter had invalid length:";
+ size_t payload_len = sizeof(error) + sizeof(sctp_errhdr_t) +
+ sizeof(sctp_paramhdr_t);
+
+ retval = sctp_make_abort(asoc, chunk, payload_len);
+ if (!retval)
+ goto nodata;
+
+ sctp_init_cause(retval, SCTP_ERROR_PROTO_VIOLATION,
+ sizeof(error) + sizeof(sctp_paramhdr_t));
+ sctp_addto_chunk(retval, sizeof(error), error);
+ sctp_addto_param(retval, sizeof(sctp_paramhdr_t), param);
+
+nodata:
+ return retval;
+}
+
/* Make a HEARTBEAT chunk. */
struct sctp_chunk *sctp_make_heartbeat(const struct sctp_association *asoc,
const struct sctp_transport *transport,
const struct sctp_chunk *chunk,
struct sctp_chunk **errp)
{
- static const char error[] = "The following parameter had invalid length:";
- size_t payload_len = WORD_ROUND(sizeof(error)) +
- sizeof(sctp_paramhdr_t);
-
-
/* This is a fatal error. Any accumulated non-fatal errors are
* not reported.
*/
sctp_chunk_free(*errp);
/* Create an error chunk and fill it in with our payload. */
- *errp = sctp_make_op_error_space(asoc, chunk, payload_len);
-
- if (*errp) {
- sctp_init_cause(*errp, SCTP_ERROR_PROTO_VIOLATION,
- sizeof(error) + sizeof(sctp_paramhdr_t));
- sctp_addto_chunk(*errp, sizeof(error), error);
- sctp_addto_param(*errp, sizeof(sctp_paramhdr_t), param);
- }
+ *errp = sctp_make_violation_paramlen(asoc, chunk, param);
return 0;
}
/* if the peer reports AUTH, assume that he
* supports AUTH.
*/
- asoc->peer.auth_capable = 1;
+ if (sctp_auth_enable)
+ asoc->peer.auth_capable = 1;
break;
case SCTP_CID_ASCONF:
case SCTP_CID_ASCONF_ACK:
- asoc->peer.asconf_capable = 1;
+ if (sctp_addip_enable)
+ asoc->peer.asconf_capable = 1;
break;
default:
break;
/* Release the transport structures. */
list_for_each_safe(pos, temp, &asoc->peer.transport_addr_list) {
transport = list_entry(pos, struct sctp_transport, transports);
- list_del_init(pos);
- sctp_transport_free(transport);
+ if (transport->state != SCTP_ACTIVE)
+ sctp_assoc_rm_peer(asoc, transport);
}
- asoc->peer.transport_count = 0;
-
nomem:
return 0;
}
break;
case SCTP_PARAM_SET_PRIMARY:
+ if (!sctp_addip_enable)
+ goto fall_through;
+
addr_param = param.v + sizeof(sctp_addip_param_t);
af = sctp_get_af_specific(param_type2af(param.p->type));
const struct sctp_endpoint *ep,
const struct sctp_association *asoc,
const sctp_subtype_t type,
- void *arg,
+ void *arg, void *ext,
sctp_cmd_seq_t *commands);
static sctp_disposition_t sctp_sf_violation_ctsn(
addr_param = (union sctp_addr_param *)hdr->params;
length = ntohs(addr_param->p.length);
if (length < sizeof(sctp_paramhdr_t))
- return sctp_sf_violation_paramlen(ep, asoc, type,
+ return sctp_sf_violation_paramlen(ep, asoc, type, arg,
(void *)addr_param, commands);
/* Verify the ASCONF chunk before processing it. */
(sctp_paramhdr_t *)((void *)addr_param + length),
(void *)chunk->chunk_end,
&err_param))
- return sctp_sf_violation_paramlen(ep, asoc, type,
- (void *)&err_param, commands);
+ return sctp_sf_violation_paramlen(ep, asoc, type, arg,
+ (void *)err_param, commands);
/* ADDIP 5.2 E1) Compare the value of the serial number to the value
* the endpoint stored in a new association variable
(sctp_paramhdr_t *)addip_hdr->params,
(void *)asconf_ack->chunk_end,
&err_param))
- return sctp_sf_violation_paramlen(ep, asoc, type,
- (void *)&err_param, commands);
+ return sctp_sf_violation_paramlen(ep, asoc, type, arg,
+ (void *)err_param, commands);
if (last_asconf) {
addip_hdr = (sctp_addiphdr_t *)last_asconf->subh.addip_hdr;
const struct sctp_endpoint *ep,
const struct sctp_association *asoc,
const sctp_subtype_t type,
- void *arg,
- sctp_cmd_seq_t *commands) {
- static const char err_str[] = "The following parameter had invalid length:";
+ void *arg, void *ext,
+ sctp_cmd_seq_t *commands)
+{
+ struct sctp_chunk *chunk = arg;
+ struct sctp_paramhdr *param = ext;
+ struct sctp_chunk *abort = NULL;
- return sctp_sf_abort_violation(ep, asoc, arg, commands, err_str,
- sizeof(err_str));
+ if (sctp_auth_recv_cid(SCTP_CID_ABORT, asoc))
+ goto discard;
+
+ /* Make the abort chunk. */
+ abort = sctp_make_violation_paramlen(asoc, chunk, param);
+ if (!abort)
+ goto nomem;
+
+ sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort));
+ SCTP_INC_STATS(SCTP_MIB_OUTCTRLCHUNKS);
+
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+ SCTP_ERROR(ECONNABORTED));
+ sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
+ SCTP_PERR(SCTP_ERROR_PROTO_VIOLATION));
+ SCTP_DEC_STATS(SCTP_MIB_CURRESTAB);
+
+discard:
+ sctp_sf_pdiscard(ep, asoc, SCTP_ST_CHUNK(0), arg, commands);
+
+ SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
+
+ return SCTP_DISPOSITION_ABORT;
+nomem:
+ return SCTP_DISPOSITION_NOMEM;
}
/* Handle a protocol violation when the peer trying to advance the
int optlen)
{
struct sctp_hmacalgo *hmacs;
+ u32 idents;
int err;
if (!sctp_auth_enable)
goto out;
}
- if (hmacs->shmac_num_idents == 0 ||
- hmacs->shmac_num_idents > SCTP_AUTH_NUM_HMACS) {
+ idents = hmacs->shmac_num_idents;
+ if (idents == 0 || idents > SCTP_AUTH_NUM_HMACS ||
+ (idents * sizeof(u16)) > (optlen - sizeof(struct sctp_hmacalgo))) {
err = -EINVAL;
goto out;
}
goto out;
}
- if (authkey->sca_keylength > optlen) {
+ if (authkey->sca_keylength > optlen - sizeof(struct sctp_authkey)) {
ret = -EINVAL;
goto out;
}
goto out_put;
}
+#if 0
#ifdef HAVE_SET_RESTORE_SIGMASK
asmlinkage long sys_paccept(int fd, struct sockaddr __user *upeer_sockaddr,
int __user *upeer_addrlen,
return do_accept(fd, upeer_sockaddr, upeer_addrlen, flags);
}
#endif
+#endif
asmlinkage long sys_accept(int fd, struct sockaddr __user *upeer_sockaddr,
int __user *upeer_addrlen)
void __user *buffer, size_t *lenp, loff_t *ppos)
{
char tmpbuf[256];
- int len;
+ size_t len;
+
if ((*ppos && !write) || !*lenp) {
*lenp = 0;
return 0;
}
- if (write)
- return -EINVAL;
- else {
- len = svc_print_xprts(tmpbuf, sizeof(tmpbuf));
- if (!access_ok(VERIFY_WRITE, buffer, len))
- return -EFAULT;
-
- if (__copy_to_user(buffer, tmpbuf, len))
- return -EFAULT;
- }
- *lenp -= len;
- *ppos += len;
- return 0;
+ len = svc_print_xprts(tmpbuf, sizeof(tmpbuf));
+ return simple_read_from_buffer(buffer, *lenp, ppos, tmpbuf, len);
}
static int
dprintk("svcrdma: rqstp=%p\n", rqstp);
- spin_lock_bh(&rdma_xprt->sc_read_complete_lock);
+ spin_lock_bh(&rdma_xprt->sc_rq_dto_lock);
if (!list_empty(&rdma_xprt->sc_read_complete_q)) {
ctxt = list_entry(rdma_xprt->sc_read_complete_q.next,
struct svc_rdma_op_ctxt,
dto_q);
list_del_init(&ctxt->dto_q);
}
- spin_unlock_bh(&rdma_xprt->sc_read_complete_lock);
- if (ctxt)
+ if (ctxt) {
+ spin_unlock_bh(&rdma_xprt->sc_rq_dto_lock);
return rdma_read_complete(rqstp, ctxt);
+ }
- spin_lock_bh(&rdma_xprt->sc_rq_dto_lock);
if (!list_empty(&rdma_xprt->sc_rq_dto_q)) {
ctxt = list_entry(rdma_xprt->sc_rq_dto_q.next,
struct svc_rdma_op_ctxt,
if (test_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags)) {
struct svc_rdma_op_ctxt *read_hdr = ctxt->read_hdr;
BUG_ON(!read_hdr);
+ spin_lock_bh(&xprt->sc_rq_dto_lock);
set_bit(XPT_DATA, &xprt->sc_xprt.xpt_flags);
- spin_lock_bh(&xprt->sc_read_complete_lock);
list_add_tail(&read_hdr->dto_q,
&xprt->sc_read_complete_q);
- spin_unlock_bh(&xprt->sc_read_complete_lock);
+ spin_unlock_bh(&xprt->sc_rq_dto_lock);
svc_xprt_enqueue(&xprt->sc_xprt);
}
svc_rdma_put_context(ctxt, 0);
init_waitqueue_head(&cma_xprt->sc_send_wait);
spin_lock_init(&cma_xprt->sc_lock);
- spin_lock_init(&cma_xprt->sc_read_complete_lock);
spin_lock_init(&cma_xprt->sc_rq_dto_lock);
cma_xprt->sc_ord = svcrdma_ord;
struct media media;
struct bcbearer_pair bpairs[MAX_BEARERS];
struct bcbearer_pair bpairs_temp[TIPC_MAX_LINK_PRI + 1];
- struct node_map remains;
- struct node_map remains_new;
+ struct tipc_node_map remains;
+ struct tipc_node_map remains_new;
};
/**
struct bclink {
struct link link;
- struct node node;
+ struct tipc_node node;
};
* Called with 'node' locked, bc_lock unlocked
*/
-static void bclink_set_gap(struct node *n_ptr)
+static void bclink_set_gap(struct tipc_node *n_ptr)
{
struct sk_buff *buf = n_ptr->bclink.deferred_head;
* Node is locked, bc_lock unlocked.
*/
-void tipc_bclink_acknowledge(struct node *n_ptr, u32 acked)
+void tipc_bclink_acknowledge(struct tipc_node *n_ptr, u32 acked)
{
struct sk_buff *crs;
struct sk_buff *next;
* tipc_net_lock and node lock set
*/
-static void bclink_send_ack(struct node *n_ptr)
+static void bclink_send_ack(struct tipc_node *n_ptr)
{
struct link *l_ptr = n_ptr->active_links[n_ptr->addr & 1];
* tipc_net_lock and node lock set
*/
-static void bclink_send_nack(struct node *n_ptr)
+static void bclink_send_nack(struct tipc_node *n_ptr)
{
struct sk_buff *buf;
struct tipc_msg *msg;
* tipc_net_lock and node lock set
*/
-void tipc_bclink_check_gap(struct node *n_ptr, u32 last_sent)
+void tipc_bclink_check_gap(struct tipc_node *n_ptr, u32 last_sent)
{
if (!n_ptr->bclink.supported ||
less_eq(last_sent, mod(n_ptr->bclink.last_in)))
static void tipc_bclink_peek_nack(u32 dest, u32 sender_tag, u32 gap_after, u32 gap_to)
{
- struct node *n_ptr = tipc_node_find(dest);
+ struct tipc_node *n_ptr = tipc_node_find(dest);
u32 my_after, my_to;
if (unlikely(!n_ptr || !tipc_node_is_up(n_ptr)))
static int rx_count = 0;
#endif
struct tipc_msg *msg = buf_msg(buf);
- struct node* node = tipc_node_find(msg_prevnode(msg));
+ struct tipc_node* node = tipc_node_find(msg_prevnode(msg));
u32 next_in;
u32 seqno;
struct sk_buff *deferred;
return last_sent;
}
-u32 tipc_bclink_acks_missing(struct node *n_ptr)
+u32 tipc_bclink_acks_missing(struct tipc_node *n_ptr)
{
return (n_ptr->bclink.supported &&
(tipc_bclink_get_last_sent() != n_ptr->bclink.acked));
#define WSIZE 32
/**
- * struct node_map - set of node identifiers
+ * struct tipc_node_map - set of node identifiers
* @count: # of nodes in set
* @map: bitmap of node identifiers that are in the set
*/
-struct node_map {
+struct tipc_node_map {
u32 count;
u32 map[MAX_NODES / WSIZE];
};
};
-struct node;
+struct tipc_node;
extern char tipc_bclink_name[];
* nmap_add - add a node to a node map
*/
-static inline void tipc_nmap_add(struct node_map *nm_ptr, u32 node)
+static inline void tipc_nmap_add(struct tipc_node_map *nm_ptr, u32 node)
{
int n = tipc_node(node);
int w = n / WSIZE;
* nmap_remove - remove a node from a node map
*/
-static inline void tipc_nmap_remove(struct node_map *nm_ptr, u32 node)
+static inline void tipc_nmap_remove(struct tipc_node_map *nm_ptr, u32 node)
{
int n = tipc_node(node);
int w = n / WSIZE;
* nmap_equal - test for equality of node maps
*/
-static inline int tipc_nmap_equal(struct node_map *nm_a, struct node_map *nm_b)
+static inline int tipc_nmap_equal(struct tipc_node_map *nm_a, struct tipc_node_map *nm_b)
{
return !memcmp(nm_a, nm_b, sizeof(*nm_a));
}
* @nm_diff: output node map A-B (i.e. nodes of A that are not in B)
*/
-static inline void tipc_nmap_diff(struct node_map *nm_a, struct node_map *nm_b,
- struct node_map *nm_diff)
+static inline void tipc_nmap_diff(struct tipc_node_map *nm_a, struct tipc_node_map *nm_b,
+ struct tipc_node_map *nm_diff)
{
int stop = sizeof(nm_a->map) / sizeof(u32);
int w;
int tipc_bclink_init(void);
void tipc_bclink_stop(void);
-void tipc_bclink_acknowledge(struct node *n_ptr, u32 acked);
+void tipc_bclink_acknowledge(struct tipc_node *n_ptr, u32 acked);
int tipc_bclink_send_msg(struct sk_buff *buf);
void tipc_bclink_recv_pkt(struct sk_buff *buf);
u32 tipc_bclink_get_last_sent(void);
-u32 tipc_bclink_acks_missing(struct node *n_ptr);
-void tipc_bclink_check_gap(struct node *n_ptr, u32 seqno);
+u32 tipc_bclink_acks_missing(struct tipc_node *n_ptr);
+void tipc_bclink_check_gap(struct tipc_node *n_ptr, u32 seqno);
int tipc_bclink_stats(char *stats_buf, const u32 buf_size);
int tipc_bclink_reset_stats(void);
int tipc_bclink_set_queue_limits(u32 limit);
spin_lock_bh(&b_ptr->publ.lock);
b_ptr->publ.blocked = 1;
list_for_each_entry_safe(l_ptr, temp_l_ptr, &b_ptr->links, link_list) {
- struct node *n_ptr = l_ptr->owner;
+ struct tipc_node *n_ptr = l_ptr->owner;
spin_lock_bh(&n_ptr->lock);
tipc_link_reset(l_ptr);
u32 continue_count;
int active;
char net_plane;
- struct node_map nodes;
+ struct tipc_node_map nodes;
};
struct bearer_name {
u32 lower, u32 upper);
static struct sk_buff *tipc_cltr_prepare_routing_msg(u32 data_size, u32 dest);
-struct node **tipc_local_nodes = NULL;
-struct node_map tipc_cltr_bcast_nodes = {0,{0,}};
+struct tipc_node **tipc_local_nodes = NULL;
+struct tipc_node_map tipc_cltr_bcast_nodes = {0,{0,}};
u32 tipc_highest_allowed_slave = 0;
struct cluster *tipc_cltr_create(u32 addr)
u32 tipc_cltr_next_node(struct cluster *c_ptr, u32 addr)
{
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
u32 n_num = tipc_node(addr) + 1;
if (!c_ptr)
return 0;
}
-void tipc_cltr_attach_node(struct cluster *c_ptr, struct node *n_ptr)
+void tipc_cltr_attach_node(struct cluster *c_ptr, struct tipc_node *n_ptr)
{
u32 n_num = tipc_node(n_ptr->addr);
u32 max_n_num = tipc_max_nodes;
* Uses deterministic and fair algorithm.
*/
-struct node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector)
+struct tipc_node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector)
{
u32 n_num;
u32 mask = tipc_max_nodes;
{
struct tipc_msg *msg = buf_msg(buf);
struct cluster *c_ptr;
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
unchar *node_table;
u32 table_size;
u32 router;
u32 lower, u32 upper)
{
struct sk_buff *buf_copy;
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
u32 n_num;
u32 tstop;
{
struct sk_buff *buf_copy;
struct cluster *c_ptr;
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
u32 n_num;
u32 tstart;
u32 tstop;
struct cluster {
u32 addr;
struct _zone *owner;
- struct node **nodes;
+ struct tipc_node **nodes;
u32 highest_node;
u32 highest_slave;
};
-extern struct node **tipc_local_nodes;
+extern struct tipc_node **tipc_local_nodes;
extern u32 tipc_highest_allowed_slave;
-extern struct node_map tipc_cltr_bcast_nodes;
+extern struct tipc_node_map tipc_cltr_bcast_nodes;
void tipc_cltr_remove_as_router(struct cluster *c_ptr, u32 router);
void tipc_cltr_send_ext_routes(struct cluster *c_ptr, u32 dest);
-struct node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector);
+struct tipc_node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector);
u32 tipc_cltr_select_router(struct cluster *c_ptr, u32 ref);
void tipc_cltr_recv_routing_table(struct sk_buff *buf);
struct cluster *tipc_cltr_create(u32 addr);
void tipc_cltr_delete(struct cluster *c_ptr);
-void tipc_cltr_attach_node(struct cluster *c_ptr, struct node *n_ptr);
+void tipc_cltr_attach_node(struct cluster *c_ptr, struct tipc_node *n_ptr);
void tipc_cltr_send_slave_routes(struct cluster *c_ptr, u32 dest);
void tipc_cltr_broadcast(struct sk_buff *buf);
int tipc_cltr_init(void);
/* Always accept link here */
struct sk_buff *rbuf;
struct tipc_media_addr *addr;
- struct node *n_ptr = tipc_node_find(orig);
+ struct tipc_node *n_ptr = tipc_node_find(orig);
int link_fully_up;
dbg(" in own cluster\n");
int tipc_link_send(struct sk_buff *buf, u32 dest, u32 selector)
{
struct link *l_ptr;
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
int res = -ELINKCONG;
read_lock_bh(&tipc_net_lock);
int tipc_send_buf_fast(struct sk_buff *buf, u32 destnode)
{
struct link *l_ptr;
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
int res;
u32 selector = msg_origport(buf_msg(buf)) & 1;
u32 dummy;
struct tipc_msg *hdr = &sender->publ.phdr;
struct link *l_ptr;
struct sk_buff *buf;
- struct node *node;
+ struct tipc_node *node;
int res;
u32 selector = msg_origport(hdr) & 1;
u32 destaddr)
{
struct link *l_ptr;
- struct node *node;
+ struct tipc_node *node;
struct tipc_msg *hdr = &sender->publ.phdr;
u32 dsz = msg_data_sz(hdr);
u32 max_pkt,fragm_sz,rest;
static void link_reset_all(unsigned long addr)
{
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
char addr_string[16];
u32 i;
/* Handle failure on broadcast link */
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
char addr_string[16];
tipc_printf(TIPC_OUTPUT, "Msg seq number: %u, ", msg_seqno(msg));
read_lock_bh(&tipc_net_lock);
while (head) {
struct bearer *b_ptr = (struct bearer *)tb_ptr;
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
struct link *l_ptr;
struct sk_buff *crs;
struct sk_buff *buf = head;
* Returns pointer to link (or 0 if invalid link name).
*/
-static struct link *link_find_link(const char *name, struct node **node)
+static struct link *link_find_link(const char *name, struct tipc_node **node)
{
struct link_name link_name_parts;
struct bearer *b_ptr;
struct tipc_link_config *args;
u32 new_value;
struct link *l_ptr;
- struct node *node;
+ struct tipc_node *node;
int res;
if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_LINK_CONFIG))
{
char *link_name;
struct link *l_ptr;
- struct node *node;
+ struct tipc_node *node;
if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_LINK_NAME))
return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
{
struct print_buf pb;
struct link *l_ptr;
- struct node *node;
+ struct tipc_node *node;
char *status;
u32 profile_total = 0;
int res = -EINVAL;
struct link *l_ptr;
u32 bearer_id;
- struct node * node;
+ struct tipc_node * node;
u32 a;
a = link_name2addr(name, &bearer_id);
u32 tipc_link_get_max_pkt(u32 dest, u32 selector)
{
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
struct link *l_ptr;
u32 res = MAX_PKT_DEFAULT;
char name[TIPC_MAX_LINK_NAME];
struct tipc_media_addr media_addr;
struct timer_list timer;
- struct node *owner;
+ struct tipc_node *owner;
struct list_head link_list;
/* Management and link supervision data */
u32 node;
u32 ref;
u32 key;
- struct node_subscr subscr;
+ struct tipc_node_subscr subscr;
struct list_head local_list;
struct list_head pport_list;
struct publication *node_list_next;
DEFINE_RWLOCK(tipc_net_lock);
struct network tipc_net = { NULL };
-struct node *tipc_net_select_remote_node(u32 addr, u32 ref)
+struct tipc_node *tipc_net_select_remote_node(u32 addr, u32 ref)
{
return tipc_zone_select_remote_node(tipc_net.zones[tipc_zone(addr)], addr, ref);
}
void tipc_net_remove_as_router(u32 router);
void tipc_net_send_external_routes(u32 dest);
void tipc_net_route_msg(struct sk_buff *buf);
-struct node *tipc_net_select_remote_node(u32 addr, u32 ref);
+struct tipc_node *tipc_net_select_remote_node(u32 addr, u32 ref);
u32 tipc_net_select_router(u32 addr, u32 ref);
int tipc_net_start(u32 addr);
#include "bearer.h"
#include "name_distr.h"
-void node_print(struct print_buf *buf, struct node *n_ptr, char *str);
-static void node_lost_contact(struct node *n_ptr);
-static void node_established_contact(struct node *n_ptr);
+void node_print(struct print_buf *buf, struct tipc_node *n_ptr, char *str);
+static void node_lost_contact(struct tipc_node *n_ptr);
+static void node_established_contact(struct tipc_node *n_ptr);
-struct node *tipc_nodes = NULL; /* sorted list of nodes within cluster */
+struct tipc_node *tipc_nodes = NULL; /* sorted list of nodes within cluster */
static DEFINE_SPINLOCK(node_create_lock);
* but this is a non-trivial change.)
*/
-struct node *tipc_node_create(u32 addr)
+struct tipc_node *tipc_node_create(u32 addr)
{
struct cluster *c_ptr;
- struct node *n_ptr;
- struct node **curr_node;
+ struct tipc_node *n_ptr;
+ struct tipc_node **curr_node;
spin_lock_bh(&node_create_lock);
return n_ptr;
}
-void tipc_node_delete(struct node *n_ptr)
+void tipc_node_delete(struct tipc_node *n_ptr)
{
if (!n_ptr)
return;
* Link becomes active (alone or shared) or standby, depending on its priority.
*/
-void tipc_node_link_up(struct node *n_ptr, struct link *l_ptr)
+void tipc_node_link_up(struct tipc_node *n_ptr, struct link *l_ptr)
{
struct link **active = &n_ptr->active_links[0];
* node_select_active_links - select active link
*/
-static void node_select_active_links(struct node *n_ptr)
+static void node_select_active_links(struct tipc_node *n_ptr)
{
struct link **active = &n_ptr->active_links[0];
u32 i;
* tipc_node_link_down - handle loss of link
*/
-void tipc_node_link_down(struct node *n_ptr, struct link *l_ptr)
+void tipc_node_link_down(struct tipc_node *n_ptr, struct link *l_ptr)
{
struct link **active;
node_lost_contact(n_ptr);
}
-int tipc_node_has_active_links(struct node *n_ptr)
+int tipc_node_has_active_links(struct tipc_node *n_ptr)
{
return (n_ptr &&
((n_ptr->active_links[0]) || (n_ptr->active_links[1])));
}
-int tipc_node_has_redundant_links(struct node *n_ptr)
+int tipc_node_has_redundant_links(struct tipc_node *n_ptr)
{
return (n_ptr->working_links > 1);
}
-static int tipc_node_has_active_routes(struct node *n_ptr)
+static int tipc_node_has_active_routes(struct tipc_node *n_ptr)
{
return (n_ptr && (n_ptr->last_router >= 0));
}
-int tipc_node_is_up(struct node *n_ptr)
+int tipc_node_is_up(struct tipc_node *n_ptr)
{
return (tipc_node_has_active_links(n_ptr) || tipc_node_has_active_routes(n_ptr));
}
-struct node *tipc_node_attach_link(struct link *l_ptr)
+struct tipc_node *tipc_node_attach_link(struct link *l_ptr)
{
- struct node *n_ptr = tipc_node_find(l_ptr->addr);
+ struct tipc_node *n_ptr = tipc_node_find(l_ptr->addr);
if (!n_ptr)
n_ptr = tipc_node_create(l_ptr->addr);
return NULL;
}
-void tipc_node_detach_link(struct node *n_ptr, struct link *l_ptr)
+void tipc_node_detach_link(struct tipc_node *n_ptr, struct link *l_ptr)
{
n_ptr->links[l_ptr->b_ptr->identity] = NULL;
tipc_net.zones[tipc_zone(l_ptr->addr)]->links--;
*
*/
-static void node_established_contact(struct node *n_ptr)
+static void node_established_contact(struct tipc_node *n_ptr)
{
struct cluster *c_ptr;
tipc_highest_allowed_slave);
}
-static void node_lost_contact(struct node *n_ptr)
+static void node_lost_contact(struct tipc_node *n_ptr)
{
struct cluster *c_ptr;
- struct node_subscr *ns, *tns;
+ struct tipc_node_subscr *ns, *tns;
char addr_string[16];
u32 i;
* Called by when cluster local lookup has failed.
*/
-struct node *tipc_node_select_next_hop(u32 addr, u32 selector)
+struct tipc_node *tipc_node_select_next_hop(u32 addr, u32 selector)
{
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
u32 router_addr;
if (!tipc_addr_domain_valid(addr))
* Uses a deterministic and fair algorithm for selecting router node.
*/
-u32 tipc_node_select_router(struct node *n_ptr, u32 ref)
+u32 tipc_node_select_router(struct tipc_node *n_ptr, u32 ref)
{
u32 ulim;
u32 mask;
return tipc_addr(own_zone(), own_cluster(), r);
}
-void tipc_node_add_router(struct node *n_ptr, u32 router)
+void tipc_node_add_router(struct tipc_node *n_ptr, u32 router)
{
u32 r_num = tipc_node(router);
!n_ptr->routers[n_ptr->last_router]);
}
-void tipc_node_remove_router(struct node *n_ptr, u32 router)
+void tipc_node_remove_router(struct tipc_node *n_ptr, u32 router)
{
u32 r_num = tipc_node(router);
}
#if 0
-void node_print(struct print_buf *buf, struct node *n_ptr, char *str)
+void node_print(struct print_buf *buf, struct tipc_node *n_ptr, char *str)
{
u32 i;
u32 tipc_available_nodes(const u32 domain)
{
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
u32 cnt = 0;
read_lock_bh(&tipc_net_lock);
{
u32 domain;
struct sk_buff *buf;
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
struct tipc_node_info node_info;
u32 payload_size;
{
u32 domain;
struct sk_buff *buf;
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
struct tipc_link_info link_info;
u32 payload_size;
#include "bearer.h"
/**
- * struct node - TIPC node structure
+ * struct tipc_node - TIPC node structure
* @addr: network address of node
* @lock: spinlock governing access to structure
* @owner: pointer to cluster that node belongs to
* @defragm: list of partially reassembled b'cast message fragments from node
*/
-struct node {
+struct tipc_node {
u32 addr;
spinlock_t lock;
struct cluster *owner;
- struct node *next;
+ struct tipc_node *next;
struct list_head nsub;
struct link *active_links[2];
struct link *links[MAX_BEARERS];
} bclink;
};
-extern struct node *tipc_nodes;
+extern struct tipc_node *tipc_nodes;
extern u32 tipc_own_tag;
-struct node *tipc_node_create(u32 addr);
-void tipc_node_delete(struct node *n_ptr);
-struct node *tipc_node_attach_link(struct link *l_ptr);
-void tipc_node_detach_link(struct node *n_ptr, struct link *l_ptr);
-void tipc_node_link_down(struct node *n_ptr, struct link *l_ptr);
-void tipc_node_link_up(struct node *n_ptr, struct link *l_ptr);
-int tipc_node_has_active_links(struct node *n_ptr);
-int tipc_node_has_redundant_links(struct node *n_ptr);
-u32 tipc_node_select_router(struct node *n_ptr, u32 ref);
-struct node *tipc_node_select_next_hop(u32 addr, u32 selector);
-int tipc_node_is_up(struct node *n_ptr);
-void tipc_node_add_router(struct node *n_ptr, u32 router);
-void tipc_node_remove_router(struct node *n_ptr, u32 router);
+struct tipc_node *tipc_node_create(u32 addr);
+void tipc_node_delete(struct tipc_node *n_ptr);
+struct tipc_node *tipc_node_attach_link(struct link *l_ptr);
+void tipc_node_detach_link(struct tipc_node *n_ptr, struct link *l_ptr);
+void tipc_node_link_down(struct tipc_node *n_ptr, struct link *l_ptr);
+void tipc_node_link_up(struct tipc_node *n_ptr, struct link *l_ptr);
+int tipc_node_has_active_links(struct tipc_node *n_ptr);
+int tipc_node_has_redundant_links(struct tipc_node *n_ptr);
+u32 tipc_node_select_router(struct tipc_node *n_ptr, u32 ref);
+struct tipc_node *tipc_node_select_next_hop(u32 addr, u32 selector);
+int tipc_node_is_up(struct tipc_node *n_ptr);
+void tipc_node_add_router(struct tipc_node *n_ptr, u32 router);
+void tipc_node_remove_router(struct tipc_node *n_ptr, u32 router);
struct sk_buff *tipc_node_get_links(const void *req_tlv_area, int req_tlv_space);
struct sk_buff *tipc_node_get_nodes(const void *req_tlv_area, int req_tlv_space);
-static inline struct node *tipc_node_find(u32 addr)
+static inline struct tipc_node *tipc_node_find(u32 addr)
{
if (likely(in_own_cluster(addr)))
return tipc_local_nodes[tipc_node(addr)];
return NULL;
}
-static inline struct node *tipc_node_select(u32 addr, u32 selector)
+static inline struct tipc_node *tipc_node_select(u32 addr, u32 selector)
{
if (likely(in_own_cluster(addr)))
return tipc_local_nodes[tipc_node(addr)];
return tipc_node_select_next_hop(addr, selector);
}
-static inline void tipc_node_lock(struct node *n_ptr)
+static inline void tipc_node_lock(struct tipc_node *n_ptr)
{
spin_lock_bh(&n_ptr->lock);
}
-static inline void tipc_node_unlock(struct node *n_ptr)
+static inline void tipc_node_unlock(struct tipc_node *n_ptr)
{
spin_unlock_bh(&n_ptr->lock);
}
* tipc_nodesub_subscribe - create "node down" subscription for specified node
*/
-void tipc_nodesub_subscribe(struct node_subscr *node_sub, u32 addr,
+void tipc_nodesub_subscribe(struct tipc_node_subscr *node_sub, u32 addr,
void *usr_handle, net_ev_handler handle_down)
{
if (addr == tipc_own_addr) {
* tipc_nodesub_unsubscribe - cancel "node down" subscription (if any)
*/
-void tipc_nodesub_unsubscribe(struct node_subscr *node_sub)
+void tipc_nodesub_unsubscribe(struct tipc_node_subscr *node_sub)
{
if (!node_sub->node)
return;
typedef void (*net_ev_handler) (void *usr_handle);
/**
- * struct node_subscr - "node down" subscription entry
+ * struct tipc_node_subscr - "node down" subscription entry
* @node: ptr to node structure of interest (or NULL, if none)
* @handle_node_down: routine to invoke when node fails
* @usr_handle: argument to pass to routine when node fails
* @nodesub_list: adjacent entries in list of subscriptions for the node
*/
-struct node_subscr {
- struct node *node;
+struct tipc_node_subscr {
+ struct tipc_node *node;
net_ev_handler handle_node_down;
void *usr_handle;
struct list_head nodesub_list;
};
-void tipc_nodesub_subscribe(struct node_subscr *node_sub, u32 addr,
+void tipc_nodesub_subscribe(struct tipc_node_subscr *node_sub, u32 addr,
void *usr_handle, net_ev_handler handle_down);
-void tipc_nodesub_unsubscribe(struct node_subscr *node_sub);
+void tipc_nodesub_unsubscribe(struct tipc_node_subscr *node_sub);
#endif
u32 probing_interval;
u32 last_in_seqno;
struct timer_list timer;
- struct node_subscr subscription;
+ struct tipc_node_subscr subscription;
};
extern spinlock_t tipc_port_list_lock;
}
}
-struct node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref)
+struct tipc_node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref)
{
struct cluster *c_ptr;
- struct node *n_ptr;
+ struct tipc_node *n_ptr;
u32 c_num;
if (!z_ptr)
u32 links;
};
-struct node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref);
+struct tipc_node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref);
u32 tipc_zone_select_router(struct _zone *z_ptr, u32 addr, u32 ref);
void tipc_zone_remove_as_router(struct _zone *z_ptr, u32 router);
void tipc_zone_send_external_routes(struct _zone *z_ptr, u32 dest);
files in /sys/class/net/*/wireless/. The same information
is available via the ioctls as well.
- Say Y if you have programs using it (we don't know of any).
+ Say Y if you have programs using it, like old versions of
+ hal.
- skb_headroom(skb);
int ntail = dst->dev->needed_tailroom - skb_tailroom(skb);
- if (nhead > 0 || ntail > 0)
- return pskb_expand_head(skb, nhead, ntail, GFP_ATOMIC);
-
- return 0;
+ if (nhead <= 0) {
+ if (ntail <= 0)
+ return 0;
+ nhead = 0;
+ } else if (ntail < 0)
+ ntail = 0;
+
+ return pskb_expand_head(skb, nhead, ntail, GFP_ATOMIC);
}
static int xfrm_output_one(struct sk_buff *skb, int err)
struct hlist_head *chain = policy_hash_bysel(&pol->selector,
pol->family, dir);
+ list_add_tail(&pol->bytype, &xfrm_policy_bytype[pol->type]);
hlist_add_head(&pol->bydst, chain);
hlist_add_head(&pol->byidx, xfrm_policy_byidx+idx_hash(pol->index));
xfrm_policy_count[dir]++;
* We can't enlist stable bundles either.
*/
write_unlock_bh(&policy->lock);
- if (dst)
- dst_free(dst);
+ dst_free(dst);
if (pol_dead)
XFRM_INC_STATS(LINUX_MIB_XFRMOUTPOLDEAD);
err = xfrm_dst_update_origin(dst, fl);
if (unlikely(err)) {
write_unlock_bh(&policy->lock);
- if (dst)
- dst_free(dst);
+ dst_free(dst);
XFRM_INC_STATS(LINUX_MIB_XFRMOUTBUNDLECHECKERROR);
goto error;
}
{
unsigned int h;
struct hlist_node *entry;
- struct xfrm_state *x, *x0;
+ struct xfrm_state *x, *x0, *to_put;
int acquire_in_progress = 0;
int error = 0;
struct xfrm_state *best = NULL;
+ to_put = NULL;
+
spin_lock_bh(&xfrm_state_lock);
h = xfrm_dst_hash(daddr, saddr, tmpl->reqid, family);
hlist_for_each_entry(x, entry, xfrm_state_bydst+h, bydst) {
if (tmpl->id.spi &&
(x0 = __xfrm_state_lookup(daddr, tmpl->id.spi,
tmpl->id.proto, family)) != NULL) {
- xfrm_state_put(x0);
+ to_put = x0;
error = -EEXIST;
goto out;
}
error = security_xfrm_state_alloc_acquire(x, pol->security, fl->secid);
if (error) {
x->km.state = XFRM_STATE_DEAD;
- xfrm_state_put(x);
+ to_put = x;
x = NULL;
goto out;
}
if (km_query(x, tmpl, pol) == 0) {
x->km.state = XFRM_STATE_ACQ;
+ list_add_tail(&x->all, &xfrm_state_all);
hlist_add_head(&x->bydst, xfrm_state_bydst+h);
h = xfrm_src_hash(daddr, saddr, family);
hlist_add_head(&x->bysrc, xfrm_state_bysrc+h);
xfrm_hash_grow_check(x->bydst.next != NULL);
} else {
x->km.state = XFRM_STATE_DEAD;
- xfrm_state_put(x);
+ to_put = x;
x = NULL;
error = -ESRCH;
}
else
*err = acquire_in_progress ? -EAGAIN : error;
spin_unlock_bh(&xfrm_state_lock);
+ if (to_put)
+ xfrm_state_put(to_put);
return x;
}
xfrm_state_hold(x);
x->timer.expires = jiffies + sysctl_xfrm_acq_expires*HZ;
add_timer(&x->timer);
+ list_add_tail(&x->all, &xfrm_state_all);
hlist_add_head(&x->bydst, xfrm_state_bydst+h);
h = xfrm_src_hash(daddr, saddr, family);
hlist_add_head(&x->bysrc, xfrm_state_bysrc+h);
int xfrm_state_add(struct xfrm_state *x)
{
- struct xfrm_state *x1;
+ struct xfrm_state *x1, *to_put;
int family;
int err;
int use_spi = xfrm_id_proto_match(x->id.proto, IPSEC_PROTO_ANY);
family = x->props.family;
+ to_put = NULL;
+
spin_lock_bh(&xfrm_state_lock);
x1 = __xfrm_state_locate(x, use_spi, family);
if (x1) {
- xfrm_state_put(x1);
+ to_put = x1;
x1 = NULL;
err = -EEXIST;
goto out;
x1 = __xfrm_find_acq_byseq(x->km.seq);
if (x1 && ((x1->id.proto != x->id.proto) ||
xfrm_addr_cmp(&x1->id.daddr, &x->id.daddr, family))) {
- xfrm_state_put(x1);
+ to_put = x1;
x1 = NULL;
}
}
xfrm_state_put(x1);
}
+ if (to_put)
+ xfrm_state_put(to_put);
+
return err;
}
EXPORT_SYMBOL(xfrm_state_add);
int xfrm_state_update(struct xfrm_state *x)
{
- struct xfrm_state *x1;
+ struct xfrm_state *x1, *to_put;
int err;
int use_spi = xfrm_id_proto_match(x->id.proto, IPSEC_PROTO_ANY);
+ to_put = NULL;
+
spin_lock_bh(&xfrm_state_lock);
x1 = __xfrm_state_locate(x, use_spi, x->props.family);
goto out;
if (xfrm_state_kern(x1)) {
- xfrm_state_put(x1);
+ to_put = x1;
err = -EEXIST;
goto out;
}
out:
spin_unlock_bh(&xfrm_state_lock);
+ if (to_put)
+ xfrm_state_put(to_put);
+
if (err)
return err;
static int indent = 1;
static int valid_stdin = 1;
+static int sync_kconfig;
static int conf_cnt;
static char line[128];
static struct menu *rootEntry;
static void check_stdin(void)
{
- if (!valid_stdin && input_mode == ask_silent) {
+ if (!valid_stdin) {
printf(_("aborted!\n\n"));
printf(_("Console input/output is redirected. "));
printf(_("Run 'make oldconfig' to update configuration.\n\n"));
check_conf(child);
}
-static void conf_do_update(void)
-{
- /* Update until a loop caused no more changes */
- do {
- conf_cnt = 0;
- check_conf(&rootmenu);
- } while (conf_cnt);
-}
-
-static int conf_silent_update(void)
-{
- const char *name;
-
- if (conf_get_changed()) {
- name = getenv("KCONFIG_NOSILENTUPDATE");
- if (name && *name) {
- fprintf(stderr,
- _("\n*** Kernel configuration requires explicit update.\n\n"));
- return 1;
- }
- conf_do_update();
- }
- return 0;
-}
-
-static int conf_update(void)
-{
- rootEntry = &rootmenu;
- conf(&rootmenu);
- if (input_mode == ask_all) {
- input_mode = ask_silent;
- valid_stdin = 1;
- }
- conf_do_update();
- return 0;
-}
-
int main(int ac, char **av)
{
int opt;
while ((opt = getopt(ac, av, "osdD:nmyrh")) != -1) {
switch (opt) {
case 'o':
- input_mode = ask_new;
+ input_mode = ask_silent;
break;
case 's':
input_mode = ask_silent;
- valid_stdin = isatty(0) && isatty(1) && isatty(2);
+ sync_kconfig = 1;
break;
case 'd':
input_mode = set_default;
name = av[optind];
conf_parse(name);
//zconfdump(stdout);
+ if (sync_kconfig) {
+ if (stat(".config", &tmpstat)) {
+ fprintf(stderr, _("***\n"
+ "*** You have not yet configured your kernel!\n"
+ "*** (missing kernel .config file)\n"
+ "***\n"
+ "*** Please run some configurator (e.g. \"make oldconfig\" or\n"
+ "*** \"make menuconfig\" or \"make xconfig\").\n"
+ "***\n"));
+ exit(1);
+ }
+ }
+
switch (input_mode) {
case set_default:
if (!defconfig_file)
}
break;
case ask_silent:
- if (stat(".config", &tmpstat)) {
- printf(_("***\n"
- "*** You have not yet configured your kernel!\n"
- "*** (missing kernel .config file)\n"
- "***\n"
- "*** Please run some configurator (e.g. \"make oldconfig\" or\n"
- "*** \"make menuconfig\" or \"make xconfig\").\n"
- "***\n"));
- exit(1);
- }
case ask_all:
case ask_new:
conf_read(NULL);
default:
break;
}
+
+ if (sync_kconfig) {
+ if (conf_get_changed()) {
+ name = getenv("KCONFIG_NOSILENTUPDATE");
+ if (name && *name) {
+ fprintf(stderr,
+ _("\n*** Kernel configuration requires explicit update.\n\n"));
+ return 1;
+ }
+ }
+ valid_stdin = isatty(0) && isatty(1) && isatty(2);
+ }
+
switch (input_mode) {
case set_no:
conf_set_all_new_symbols(def_no);
case set_default:
conf_set_all_new_symbols(def_default);
break;
- case ask_silent:
case ask_new:
- if (conf_silent_update())
- exit(1);
- break;
case ask_all:
- if (conf_update())
- exit(1);
+ rootEntry = &rootmenu;
+ conf(&rootmenu);
+ input_mode = ask_silent;
+ /* fall through */
+ case ask_silent:
+ /* Update until a loop caused no more changes */
+ do {
+ conf_cnt = 0;
+ check_conf(&rootmenu);
+ } while (conf_cnt);
break;
}
- if (conf_write(NULL)) {
- fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
- exit(1);
- }
- /* ask_silent is used during the build so we shall update autoconf.
- * All other commands are only used to generate a config.
- */
- if (input_mode == ask_silent && conf_write_autoconf()) {
- fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
- return 1;
+ if (sync_kconfig) {
+ /* silentoldconfig is used during the build so we shall update autoconf.
+ * All other commands are only used to generate a config.
+ */
+ if (conf_get_changed() && conf_write(NULL)) {
+ fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
+ exit(1);
+ }
+ if (conf_write_autoconf()) {
+ fprintf(stderr, _("\n*** Error during update of the kernel configuration.\n\n"));
+ return 1;
+ }
+ } else {
+ if (conf_write(NULL)) {
+ fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
+ exit(1);
+ }
}
return 0;
}
continue;
if (def == S_DEF_USER) {
sym = sym_find(line + 9);
- if (!sym)
+ if (!sym) {
+ sym_add_change_count(1);
break;
+ }
} else {
sym = sym_lookup(line + 9, 0);
if (sym->type == S_UNKNOWN)
}
if (def == S_DEF_USER) {
sym = sym_find(line + 7);
- if (!sym)
+ if (!sym) {
+ sym_add_change_count(1);
break;
+ }
} else {
sym = sym_lookup(line + 7, 0);
if (sym->type == S_UNKNOWN)
print " <refsect1>\n";
print " <title>Members</title>\n";
+ if ($#{$args{'parameterlist'}} >= 0) {
print " <variablelist>\n";
foreach $parameter (@{$args{'parameterlist'}}) {
($parameter =~ /^#/) && next;
print " </varlistentry>\n";
}
print " </variablelist>\n";
+ } else {
+ print " <para>\n None\n </para>\n";
+ }
print " </refsect1>\n";
output_section_xml(@_);
return 0;
if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode))
return 0;
- dev_cgroup = css_to_devcgroup(task_subsys_state(current,
- devices_subsys_id));
- if (!dev_cgroup)
- return 0;
rcu_read_lock();
+
+ dev_cgroup = task_devcgroup(current);
+
list_for_each_entry_rcu(wh, &dev_cgroup->whitelist, list) {
if (wh->type & DEV_ALL)
goto acc_check;
rcu_read_unlock();
return 0;
}
+
rcu_read_unlock();
return -EPERM;
struct dev_cgroup *dev_cgroup;
struct dev_whitelist_item *wh;
- dev_cgroup = css_to_devcgroup(task_subsys_state(current,
- devices_subsys_id));
- if (!dev_cgroup)
- return 0;
-
rcu_read_lock();
+
+ dev_cgroup = task_devcgroup(current);
+
list_for_each_entry(wh, &dev_cgroup->whitelist, list) {
if (wh->type & DEV_ALL)
goto acc_check;
rcu_read_unlock();
return 0;
}
+
rcu_read_unlock();
+
return -EPERM;
}
/* Check the validity of the new context. */
if (!policydb_context_isvalid(pol, ctx)) {
rc = -EINVAL;
- context_destroy(ctx);
goto out;
}
rc = 0;
out:
+ if (rc)
+ context_destroy(ctx);
return rc;
}
} else if (rc)
goto out;
rc = sidtab_context_to_sid(&sidtab, &context, sid);
- if (rc)
- context_destroy(&context);
+ context_destroy(&context);
out:
read_unlock(&policy_rwlock);
kfree(scontext2);
if (ctx == NULL)
goto netlbl_secattr_to_sid_return;
+ context_init(&ctx_new);
ctx_new.user = ctx->user;
ctx_new.role = ctx->role;
ctx_new.type = ctx->type;
if (ebitmap_netlbl_import(&ctx_new.range.level[0].cat,
secattr->attr.mls.cat) != 0)
goto netlbl_secattr_to_sid_return;
- ctx_new.range.level[1].cat.highbit =
- ctx_new.range.level[0].cat.highbit;
- ctx_new.range.level[1].cat.node =
- ctx_new.range.level[0].cat.node;
- } else {
- ebitmap_init(&ctx_new.range.level[0].cat);
- ebitmap_init(&ctx_new.range.level[1].cat);
+ memcpy(&ctx_new.range.level[1].cat,
+ &ctx_new.range.level[0].cat,
+ sizeof(ctx_new.range.level[0].cat));
}
if (mls_context_isvalid(&policydb, &ctx_new) != 1)
goto netlbl_secattr_to_sid_return_cleanup;
endif # !M68K
+endif # SOUND
+
+# AC97_BUS is used from both sound and ucb1400
config AC97_BUS
tristate
help
sound although they're sharing the AC97 bus. Concerned drivers
should "select" this.
-endif # SOUND
return -ENODEV;
card = pcm->card;
- down_read(&card->controls_rwsem);
+ read_lock(&card->ctl_files_rwlock);
list_for_each_entry(kctl, &card->ctl_files, list) {
if (kctl->pid == current->pid) {
prefer_subdevice = kctl->prefer_pcm_subdevice;
break;
}
}
- up_read(&card->controls_rwsem);
+ read_unlock(&card->ctl_files_rwlock);
switch (stream) {
case SNDRV_PCM_STREAM_PLAYBACK:
card = substream->pcm->card;
if (runtime->status->state == SNDRV_PCM_STATE_OPEN ||
- runtime->status->state == SNDRV_PCM_STATE_DISCONNECTED)
+ runtime->status->state == SNDRV_PCM_STATE_DISCONNECTED ||
+ runtime->status->state == SNDRV_PCM_STATE_SUSPENDED)
return -EBADFD;
- snd_power_lock(card);
- if (runtime->status->state == SNDRV_PCM_STATE_SUSPENDED) {
- result = snd_power_wait(card, SNDRV_CTL_POWER_D0);
- if (result < 0)
- goto _unlock;
- }
-
snd_pcm_stream_lock_irq(substream);
/* resume pause */
if (runtime->status->state == SNDRV_PCM_STATE_PAUSED)
snd_pcm_stop(substream, SNDRV_PCM_STATE_SETUP);
/* runtime->control->appl_ptr = runtime->status->hw_ptr; */
snd_pcm_stream_unlock_irq(substream);
- _unlock:
- snd_power_unlock(card);
+
return result;
}
mutex_lock(&rmidi->open_mutex);
while (1) {
subdevice = -1;
- down_read(&card->controls_rwsem);
+ read_lock(&card->ctl_files_rwlock);
list_for_each_entry(kctl, &card->ctl_files, list) {
if (kctl->pid == current->pid) {
subdevice = kctl->prefer_rawmidi_subdevice;
break;
}
}
- up_read(&card->controls_rwsem);
+ read_unlock(&card->ctl_files_rwlock);
err = snd_rawmidi_kernel_open(rmidi->card, rmidi->device,
subdevice, fflags, rawmidi_file);
if (err >= 0)
SND_PCI_QUIRK(0x1043, 0x817f, "Asus P5LD2", ALC882_6ST_DIG),
SND_PCI_QUIRK(0x1043, 0x81d8, "Asus P5WD", ALC882_6ST_DIG),
SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC882_6ST_DIG),
- SND_PCI_QUIRK(0x106b, 0x00a0, "Apple iMac 24''", ALC885_IMAC24),
SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte P35 DS3R", ALC882_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x28fb, "Targa T8", ALC882_TARGA), /* MSI-1049 T8 */
SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC882_6ST_DIG),
{ }
};
+/* additional verbs for ALC663 */
+static struct hda_verb alc663_auto_init_verbs[] = {
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ { }
+};
+
static struct hda_verb alc663_m51va_init_verbs[] = {
{0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
if (!pin)
return 0;
+ if (pin == 0x17) {
+ /* ALC663 has a mono output pin on 0x17 */
+ sprintf(name, "%s Playback Switch", pfx);
+ err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(pin, 2, 0, HDA_OUTPUT));
+ return err;
+ }
+
if (alc880_is_fixed_pin(pin)) {
nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
/* printk("DAC nid=%x\n",nid); */
spec->input_mux = &spec->private_imux;
spec->init_verbs[spec->num_init_verbs++] = alc662_auto_init_verbs;
+ if (codec->vendor_id == 0x10ec0663)
+ spec->init_verbs[spec->num_init_verbs++] =
+ alc663_auto_init_verbs;
+
+ err = alc_auto_add_mic_boost(codec);
+ if (err < 0)
+ return err;
+
spec->mixers[spec->num_mixers] = alc662_capture_mixer;
spec->num_mixers++;
return 1;
};
static struct hda_verb dell_m6_core_init[] = {
- /* set master volume and direct control */
- { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
+ /* set master volume to max value without distortion
+ * and direct control */
+ { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xec},
/* setup audio connections */
{ 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
{ 0x0a, AC_VERB_SET_CONNECT_SEL, 0x01},
/* Dell 3 stack systems with verb table in BIOS */
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f3, "Dell Inspiron 1420", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0227, "Dell Vostro 1400 ", STAC_DELL_BIOS),
- SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022f, "Dell ", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022e, "Dell ", STAC_DELL_BIOS),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022f, "Dell Inspiron 1525", STAC_DELL_3ST),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0242, "Dell ", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0243, "Dell ", STAC_DELL_BIOS),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ff, "Dell ", STAC_DELL_BIOS),
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/delay.h>
#include <linux/pci.h>
#include <sound/control.h>
#include <sound/core.h>
else
value |= AK4396_DFS_QUAD;
data->ak4396_ctl2 = value;
+
+ msleep(1); /* wait for the new MCLK to become stable */
+
ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB);
ak4396_write(chip, AK4396_CONTROL_2, value);
ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB | AK4396_RSTN);
* GPIO 1 -> DFS1 of AK5385
*/
+#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/pci.h>
#include <sound/ac97_codec.h>
else
value |= AK4396_DFS_QUAD;
data->ak4396_ctl2 = value;
+
+ msleep(1); /* wait for the new MCLK to become stable */
+
for (i = 0; i < 4; ++i) {
ak4396_write(chip, i,
AK4396_CONTROL_1, AK4396_DIF_24_MSB);
AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
};
+static struct snd_kcontrol_new snd_pmac_screamer_mixers_g4agp[] __initdata = {
+ AWACS_VOLUME("Line out Playback Volume", 2, 6, 1),
+ AWACS_VOLUME("Master Playback Volume", 5, 6, 1),
+ AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
+ AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0),
+};
+
static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac7500[] __initdata = {
AWACS_VOLUME("Line out Playback Volume", 2, 6, 1),
AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0),
static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw __initdata =
AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_SPKMUTE, 1);
-static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac __initdata =
+static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac1 __initdata =
+AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_PAROUT1, 1);
+
+static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac2 __initdata =
AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_PAROUT1, 0);
#define IS_PM7500 (machine_is_compatible("AAPL,7500"))
#define IS_BEIGE (machine_is_compatible("AAPL,Gossamer"))
-#define IS_IMAC (machine_is_compatible("PowerMac2,1") \
- || machine_is_compatible("PowerMac2,2") \
+#define IS_IMAC1 (machine_is_compatible("PowerMac2,1"))
+#define IS_IMAC2 (machine_is_compatible("PowerMac2,2") \
|| machine_is_compatible("PowerMac4,1"))
+#define IS_G4AGP (machine_is_compatible("PowerMac3,1"))
-static int imac;
+static int imac1, imac2;
#ifdef PMAC_SUPPORT_AUTOMUTE
/*
{
int reg = chip->awacs_reg[1]
| (MASK_HDMUTE | MASK_SPKMUTE);
- if (imac) {
+ if (imac1) {
+ reg &= ~MASK_SPKMUTE;
+ reg |= MASK_PAROUT1;
+ } else if (imac2) {
reg &= ~MASK_SPKMUTE;
reg &= ~MASK_PAROUT1;
}
if (snd_pmac_awacs_detect_headphone(chip))
reg &= ~MASK_HDMUTE;
- else if (imac)
+ else if (imac1)
+ reg &= ~MASK_PAROUT1;
+ else if (imac2)
reg |= MASK_PAROUT1;
else
reg &= ~MASK_SPKMUTE;
{
int pm7500 = IS_PM7500;
int beige = IS_BEIGE;
+ int g4agp = IS_G4AGP;
+ int imac;
int err, vol;
- imac = IS_IMAC;
+ imac1 = IS_IMAC1;
+ imac2 = IS_IMAC2;
+ imac = imac1 || imac2;
/* looks like MASK_GAINLINE triggers something, so we set here
* as start-up
*/
snd_pmac_awacs_mixers);
if (err < 0)
return err;
- if (beige)
+ if (beige || g4agp)
;
else if (chip->model == PMAC_SCREAMER)
err = build_mixers(chip, ARRAY_SIZE(snd_pmac_screamer_mixers2),
err = build_mixers(chip,
ARRAY_SIZE(snd_pmac_screamer_mixers_imac),
snd_pmac_screamer_mixers_imac);
+ else if (g4agp)
+ err = build_mixers(chip,
+ ARRAY_SIZE(snd_pmac_screamer_mixers_g4agp),
+ snd_pmac_screamer_mixers_g4agp);
else
err = build_mixers(chip,
ARRAY_SIZE(snd_pmac_awacs_mixers_pmac),
snd_pmac_awacs_mixers_pmac);
if (err < 0)
return err;
- chip->master_sw_ctl = snd_ctl_new1((pm7500 || imac)
+ chip->master_sw_ctl = snd_ctl_new1((pm7500 || imac || g4agp)
? &snd_pmac_awacs_master_sw_imac
: &snd_pmac_awacs_master_sw, chip);
err = snd_ctl_add(chip->card, chip->master_sw_ctl);
snd_pmac_awacs_speaker_vol);
if (err < 0)
return err;
- chip->speaker_sw_ctl = snd_ctl_new1(imac
- ? &snd_pmac_awacs_speaker_sw_imac
+ chip->speaker_sw_ctl = snd_ctl_new1(imac1
+ ? &snd_pmac_awacs_speaker_sw_imac1
+ : imac2
+ ? &snd_pmac_awacs_speaker_sw_imac2
: &snd_pmac_awacs_speaker_sw, chip);
err = snd_ctl_add(chip->card, chip->speaker_sw_ctl);
if (err < 0)
return err;
}
- if (beige)
+ if (beige || g4agp)
err = build_mixers(chip,
ARRAY_SIZE(snd_pmac_screamer_mic_boost_beige),
snd_pmac_screamer_mic_boost_beige);
params = prtd->params;
/* Disable the PDC and save the PDC registers */
- ssc_writex(params->ssc->regs, PDC_PTCR, params->mask->pdc_disable);
+ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+ params->mask->pdc_disable);
prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr);
prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr);
ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save);
ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save);
- ssc_writex(params->ssc->regs, PDC_PTCR, params->mask->pdc_enable);
+ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, params->mask->pdc_enable);
return 0;
}
#else /* CONFIG_PM */
#endif
-static int cs4270_i2c_probe(struct i2c_adapter *adap, int addr, int kind);
-
-/*
- * Notify the driver that a new I2C bus has been found.
- *
- * This function is called for each I2C bus in the system. The function
- * then asks the I2C subsystem to probe that bus at the addresses on which
- * our device (the CS4270) could exist. If a device is found at one of
- * those addresses, then our probe function (cs4270_i2c_probe) is called.
- */
-static int cs4270_i2c_attach(struct i2c_adapter *adapter)
-{
- return i2c_probe(adapter, &addr_data, cs4270_i2c_probe);
-}
-
-static int cs4270_i2c_detach(struct i2c_client *client)
-{
- struct snd_soc_codec *codec = i2c_get_clientdata(client);
-
- i2c_detach_client(client);
- codec->control_data = NULL;
-
- kfree(codec->reg_cache);
- codec->reg_cache = NULL;
-
- kfree(client);
- return 0;
-}
+static int cs4270_i2c_probe(struct i2c_client *, const struct i2c_device_id *);
/* A list of non-DAPM controls that the CS4270 supports */
static const struct snd_kcontrol_new cs4270_snd_controls[] = {
CS4270_VOLA, CS4270_VOLB, 0, 0xFF, 1)
};
+static const struct i2c_device_id cs4270_id[] = {
+ {"cs4270", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, cs4270_id);
+
static struct i2c_driver cs4270_i2c_driver = {
.driver = {
.name = "CS4270 I2C",
.owner = THIS_MODULE,
},
- .id = I2C_DRIVERID_CS4270,
- .attach_adapter = cs4270_i2c_attach,
- .detach_client = cs4270_i2c_detach,
+ .id_table = cs4270_id,
+ .probe = cs4270_i2c_probe,
};
/*
* Note: snd_soc_new_pcms() must be called before this function can be called,
* because of snd_ctl_add().
*/
-static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind)
+static int cs4270_i2c_probe(struct i2c_client *i2c_client,
+ const struct i2c_device_id *id)
{
struct snd_soc_device *socdev = cs4270_socdev;
struct snd_soc_codec *codec = socdev->codec;
- struct i2c_client *i2c_client = NULL;
int i;
int ret = 0;
/* Note: codec_dai->codec is NULL here */
- i2c_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (!i2c_client) {
- printk(KERN_ERR "cs4270: could not allocate I2C client\n");
- return -ENOMEM;
- }
-
codec->reg_cache = kzalloc(CS4270_NUMREGS, GFP_KERNEL);
if (!codec->reg_cache) {
printk(KERN_ERR "cs4270: could not allocate register cache\n");
goto error;
}
- i2c_set_clientdata(i2c_client, codec);
- strcpy(i2c_client->name, "CS4270");
-
- i2c_client->driver = &cs4270_i2c_driver;
- i2c_client->adapter = adapter;
- i2c_client->addr = addr;
-
/* Verify that we have a CS4270 */
ret = i2c_smbus_read_byte_data(i2c_client, CS4270_CHIPID);
goto error;
}
- printk(KERN_INFO "cs4270: found device at I2C address %X\n", addr);
+ printk(KERN_INFO "cs4270: found device at I2C address %X\n",
+ i2c_client->addr);
printk(KERN_INFO "cs4270: hardware revision %X\n", ret & 0xF);
- /* Tell the I2C layer a new client has arrived */
-
- ret = i2c_attach_client(i2c_client);
- if (ret) {
- printk(KERN_ERR "cs4270: could not attach codec, "
- "I2C address %x, error code %i\n", addr, ret);
- goto error;
- }
-
codec->control_data = i2c_client;
codec->read = cs4270_read_reg_cache;
codec->write = cs4270_i2c_write;
goto error;
}
+ i2c_set_clientdata(i2c_client, codec);
+
return 0;
error:
- if (codec->control_data) {
- i2c_detach_client(i2c_client);
- codec->control_data = NULL;
- }
+ codec->control_data = NULL;
kfree(codec->reg_cache);
codec->reg_cache = NULL;
codec->reg_cache_size = 0;
- kfree(i2c_client);
-
return ret;
}
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0) {
printk(KERN_ERR "cs4270: failed to create PCMs\n");
- return ret;
+ goto error_free_codec;
}
#ifdef USE_I2C
ret = i2c_add_driver(&cs4270_i2c_driver);
if (ret) {
printk(KERN_ERR "cs4270: failed to attach driver");
- snd_soc_free_pcms(socdev);
- return ret;
+ goto error_free_pcms;
}
/* Did we find a CS4270 on the I2C bus? */
ret = snd_soc_register_card(socdev);
if (ret < 0) {
printk(KERN_ERR "cs4270: failed to register card\n");
- snd_soc_free_pcms(socdev);
- return ret;
+ goto error_del_driver;
}
+ return 0;
+
+error_del_driver:
+#ifdef USE_I2C
+ i2c_del_driver(&cs4270_i2c_driver);
+
+error_free_pcms:
+#endif
+ snd_soc_free_pcms(socdev);
+
+error_free_codec:
+ kfree(socdev->codec);
+ socdev->codec = NULL;
+
return ret;
}
snd_soc_free_pcms(socdev);
#ifdef USE_I2C
- if (socdev->codec->control_data)
- i2c_del_driver(&cs4270_i2c_driver);
+ i2c_del_driver(&cs4270_i2c_driver);
#endif
kfree(socdev->codec);
/* out 4 */
{"Out4 Mux", "VREF", "VREF"},
- {"Out4 Mux", "Capture ST", "Capture ST Mixer"},
+ {"Out4 Mux", "Capture ST", "Playback Mixer"},
{"Out4 Mux", "LOUT2", "LOUT2"},
{"Out 4", NULL, "Out4 Mux"},
{"OUT4", NULL, "Out 4"},
/* Capture Right Mux */
{"Capture Right Mux", "PGA", "Right Capture Volume"},
{"Capture Right Mux", "Line or RXP-RXN", "Line Right Mux"},
- {"Capture Right Mux", "Sidetone", "Capture ST Mixer"},
+ {"Capture Right Mux", "Sidetone", "Playback Mixer"},
/* Mono Capture mixer-mux */
{"Capture Right Mixer", "Stereo", "Capture Right Mux"},
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/clk.h>
+#include <linux/platform_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/initval.h>
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
- clk_i2s = clk_get(NULL, "I2SCLK");
if (IS_ERR(clk_i2s))
return PTR_ERR(clk_i2s);
pxa_gpio_mode(gpio_bus[pxa_i2s.master].tx);
pxa_gpio_mode(gpio_bus[pxa_i2s.master].frm);
pxa_gpio_mode(gpio_bus[pxa_i2s.master].clk);
+ BUG_ON(IS_ERR(clk_i2s));
clk_enable(clk_i2s);
pxa_i2s_wait();
EXPORT_SYMBOL_GPL(pxa_i2s_dai);
+static int pxa2xx_i2s_probe(struct platform_device *dev)
+{
+ clk_i2s = clk_get(&dev->dev, "I2SCLK");
+ return IS_ERR(clk_i2s) ? PTR_ERR(clk_i2s) : 0;
+}
+
+static int __devexit pxa2xx_i2s_remove(struct platform_device *dev)
+{
+ clk_put(clk_i2s);
+ clk_i2s = ERR_PTR(-ENOENT);
+ return 0;
+}
+
+static struct platform_driver pxa2xx_i2s_driver = {
+ .probe = pxa2xx_i2s_probe,
+ .remove = __devexit_p(pxa2xx_i2s_remove),
+
+ .driver = {
+ .name = "pxa2xx-i2s",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init pxa2xx_i2s_init(void)
+{
+ clk_i2s = ERR_PTR(-ENOENT);
+ return platform_driver_register(&pxa2xx_i2s_driver);
+}
+
+static void __exit pxa2xx_i2s_exit(void)
+{
+ platform_driver_unregister(&pxa2xx_i2s_driver);
+}
+
+module_init(pxa2xx_i2s_init);
+module_exit(pxa2xx_i2s_exit);
+
/* Module information */
MODULE_AUTHOR("Liam Girdwood, liam.girdwood@wolfsonmicro.com, www.wolfsonmicro.com");
MODULE_DESCRIPTION("pxa2xx I2S SoC Interface");
projects / linux-2.6-omap-h63xx.git / commitdiff