]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
powerpc/32: Restore previous version of 32-bit PCI code
authorPaul Mackerras <paulus@samba.org>
Sun, 15 Jan 2006 11:05:47 +0000 (22:05 +1100)
committerPaul Mackerras <paulus@samba.org>
Sun, 15 Jan 2006 11:05:47 +0000 (22:05 +1100)
When I removed the powermac support from arch/ppc/kernel/pci.c,
I overlooked the fact that that file is used in 32-bit ARCH=powerpc
builds.  To prevent problems in future, restore the original version
of that file as arch/powerpc/kernel/pci_32.c, and use that.

Signed-off-by: Paul Mackerras <paulus@samba.org>
arch/powerpc/kernel/Makefile
arch/powerpc/kernel/pci_32.c [new file with mode: 0644]
arch/ppc/kernel/Makefile

index a94699d8dc52b4d534264d9e95439080bc13451d..c287980b7e65f3551444053609f20528e1efadb6 100644 (file)
@@ -60,7 +60,8 @@ obj-$(CONFIG_MODULES)         += $(module-y)
 
 pci64-$(CONFIG_PPC64)          += pci_64.o pci_dn.o pci_iommu.o \
                                   pci_direct_iommu.o iomap.o
-obj-$(CONFIG_PCI)              += $(pci64-y)
+pci32-$(CONFIG_PPC32)          := pci_32.o
+obj-$(CONFIG_PCI)              += $(pci64-y) $(pci32-y)
 kexec-$(CONFIG_PPC64)          := machine_kexec_64.o crash.o
 kexec-$(CONFIG_PPC32)          := machine_kexec_32.o
 obj-$(CONFIG_KEXEC)            += machine_kexec.o $(kexec-y)
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
new file mode 100644 (file)
index 0000000..704c846
--- /dev/null
@@ -0,0 +1,1897 @@
+/*
+ * Common pmac/prep/chrp pci routines. -- Cort
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/capability.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/bootmem.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/sections.h>
+#include <asm/pci-bridge.h>
+#include <asm/byteorder.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+unsigned long isa_io_base     = 0;
+unsigned long isa_mem_base    = 0;
+unsigned long pci_dram_offset = 0;
+int pcibios_assign_bus_offset = 1;
+
+void pcibios_make_OF_bus_map(void);
+
+static int pci_relocate_bridge_resource(struct pci_bus *bus, int i);
+static int probe_resource(struct pci_bus *parent, struct resource *pr,
+                         struct resource *res, struct resource **conflict);
+static void update_bridge_base(struct pci_bus *bus, int i);
+static void pcibios_fixup_resources(struct pci_dev* dev);
+static void fixup_broken_pcnet32(struct pci_dev* dev);
+static int reparent_resources(struct resource *parent, struct resource *res);
+static void fixup_cpc710_pci64(struct pci_dev* dev);
+#ifdef CONFIG_PPC_OF
+static u8* pci_to_OF_bus_map;
+#endif
+
+/* By default, we don't re-assign bus numbers. We do this only on
+ * some pmacs
+ */
+int pci_assign_all_buses;
+
+struct pci_controller* hose_head;
+struct pci_controller** hose_tail = &hose_head;
+
+static int pci_bus_count;
+
+static void
+fixup_broken_pcnet32(struct pci_dev* dev)
+{
+       if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
+               dev->vendor = PCI_VENDOR_ID_AMD;
+               pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD);
+       }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT,        PCI_ANY_ID,                     fixup_broken_pcnet32);
+
+static void
+fixup_cpc710_pci64(struct pci_dev* dev)
+{
+       /* Hide the PCI64 BARs from the kernel as their content doesn't
+        * fit well in the resource management
+        */
+       dev->resource[0].start = dev->resource[0].end = 0;
+       dev->resource[0].flags = 0;
+       dev->resource[1].start = dev->resource[1].end = 0;
+       dev->resource[1].flags = 0;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM,    PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64);
+
+static void
+pcibios_fixup_resources(struct pci_dev *dev)
+{
+       struct pci_controller* hose = (struct pci_controller *)dev->sysdata;
+       int i;
+       unsigned long offset;
+
+       if (!hose) {
+               printk(KERN_ERR "No hose for PCI dev %s!\n", pci_name(dev));
+               return;
+       }
+       for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+               struct resource *res = dev->resource + i;
+               if (!res->flags)
+                       continue;
+               if (res->end == 0xffffffff) {
+                       DBG("PCI:%s Resource %d [%08lx-%08lx] is unassigned\n",
+                           pci_name(dev), i, res->start, res->end);
+                       res->end -= res->start;
+                       res->start = 0;
+                       res->flags |= IORESOURCE_UNSET;
+                       continue;
+               }
+               offset = 0;
+               if (res->flags & IORESOURCE_MEM) {
+                       offset = hose->pci_mem_offset;
+               } else if (res->flags & IORESOURCE_IO) {
+                       offset = (unsigned long) hose->io_base_virt
+                               - isa_io_base;
+               }
+               if (offset != 0) {
+                       res->start += offset;
+                       res->end += offset;
+#ifdef DEBUG
+                       printk("Fixup res %d (%lx) of dev %s: %lx -> %lx\n",
+                              i, res->flags, pci_name(dev),
+                              res->start - offset, res->start);
+#endif
+               }
+       }
+
+       /* Call machine specific resource fixup */
+       if (ppc_md.pcibios_fixup_resources)
+               ppc_md.pcibios_fixup_resources(dev);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID,           PCI_ANY_ID,                     pcibios_fixup_resources);
+
+void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+                       struct resource *res)
+{
+       unsigned long offset = 0;
+       struct pci_controller *hose = dev->sysdata;
+
+       if (hose && res->flags & IORESOURCE_IO)
+               offset = (unsigned long)hose->io_base_virt - isa_io_base;
+       else if (hose && res->flags & IORESOURCE_MEM)
+               offset = hose->pci_mem_offset;
+       region->start = res->start - offset;
+       region->end = res->end - offset;
+}
+EXPORT_SYMBOL(pcibios_resource_to_bus);
+
+void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+                            struct pci_bus_region *region)
+{
+       unsigned long offset = 0;
+       struct pci_controller *hose = dev->sysdata;
+
+       if (hose && res->flags & IORESOURCE_IO)
+               offset = (unsigned long)hose->io_base_virt - isa_io_base;
+       else if (hose && res->flags & IORESOURCE_MEM)
+               offset = hose->pci_mem_offset;
+       res->start = region->start + offset;
+       res->end = region->end + offset;
+}
+EXPORT_SYMBOL(pcibios_bus_to_resource);
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+void pcibios_align_resource(void *data, struct resource *res, unsigned long size,
+                      unsigned long align)
+{
+       struct pci_dev *dev = data;
+
+       if (res->flags & IORESOURCE_IO) {
+               unsigned long start = res->start;
+
+               if (size > 0x100) {
+                       printk(KERN_ERR "PCI: I/O Region %s/%d too large"
+                              " (%ld bytes)\n", pci_name(dev),
+                              dev->resource - res, size);
+               }
+
+               if (start & 0x300) {
+                       start = (start + 0x3ff) & ~0x3ff;
+                       res->start = start;
+               }
+       }
+}
+EXPORT_SYMBOL(pcibios_align_resource);
+
+/*
+ *  Handle resources of PCI devices.  If the world were perfect, we could
+ *  just allocate all the resource regions and do nothing more.  It isn't.
+ *  On the other hand, we cannot just re-allocate all devices, as it would
+ *  require us to know lots of host bridge internals.  So we attempt to
+ *  keep as much of the original configuration as possible, but tweak it
+ *  when it's found to be wrong.
+ *
+ *  Known BIOS problems we have to work around:
+ *     - I/O or memory regions not configured
+ *     - regions configured, but not enabled in the command register
+ *     - bogus I/O addresses above 64K used
+ *     - expansion ROMs left enabled (this may sound harmless, but given
+ *       the fact the PCI specs explicitly allow address decoders to be
+ *       shared between expansion ROMs and other resource regions, it's
+ *       at least dangerous)
+ *
+ *  Our solution:
+ *     (1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ *         This gives us fixed barriers on where we can allocate.
+ *     (2) Allocate resources for all enabled devices.  If there is
+ *         a collision, just mark the resource as unallocated. Also
+ *         disable expansion ROMs during this step.
+ *     (3) Try to allocate resources for disabled devices.  If the
+ *         resources were assigned correctly, everything goes well,
+ *         if they weren't, they won't disturb allocation of other
+ *         resources.
+ *     (4) Assign new addresses to resources which were either
+ *         not configured at all or misconfigured.  If explicitly
+ *         requested by the user, configure expansion ROM address
+ *         as well.
+ */
+
+static void __init
+pcibios_allocate_bus_resources(struct list_head *bus_list)
+{
+       struct pci_bus *bus;
+       int i;
+       struct resource *res, *pr;
+
+       /* Depth-First Search on bus tree */
+       list_for_each_entry(bus, bus_list, node) {
+               for (i = 0; i < 4; ++i) {
+                       if ((res = bus->resource[i]) == NULL || !res->flags
+                           || res->start > res->end)
+                               continue;
+                       if (bus->parent == NULL)
+                               pr = (res->flags & IORESOURCE_IO)?
+                                       &ioport_resource: &iomem_resource;
+                       else {
+                               pr = pci_find_parent_resource(bus->self, res);
+                               if (pr == res) {
+                                       /* this happens when the generic PCI
+                                        * code (wrongly) decides that this
+                                        * bridge is transparent  -- paulus
+                                        */
+                                       continue;
+                               }
+                       }
+
+                       DBG("PCI: bridge rsrc %lx..%lx (%lx), parent %p\n",
+                           res->start, res->end, res->flags, pr);
+                       if (pr) {
+                               if (request_resource(pr, res) == 0)
+                                       continue;
+                               /*
+                                * Must be a conflict with an existing entry.
+                                * Move that entry (or entries) under the
+                                * bridge resource and try again.
+                                */
+                               if (reparent_resources(pr, res) == 0)
+                                       continue;
+                       }
+                       printk(KERN_ERR "PCI: Cannot allocate resource region "
+                              "%d of PCI bridge %d\n", i, bus->number);
+                       if (pci_relocate_bridge_resource(bus, i))
+                               bus->resource[i] = NULL;
+               }
+               pcibios_allocate_bus_resources(&bus->children);
+       }
+}
+
+/*
+ * Reparent resource children of pr that conflict with res
+ * under res, and make res replace those children.
+ */
+static int __init
+reparent_resources(struct resource *parent, struct resource *res)
+{
+       struct resource *p, **pp;
+       struct resource **firstpp = NULL;
+
+       for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) {
+               if (p->end < res->start)
+                       continue;
+               if (res->end < p->start)
+                       break;
+               if (p->start < res->start || p->end > res->end)
+                       return -1;      /* not completely contained */
+               if (firstpp == NULL)
+                       firstpp = pp;
+       }
+       if (firstpp == NULL)
+               return -1;      /* didn't find any conflicting entries? */
+       res->parent = parent;
+       res->child = *firstpp;
+       res->sibling = *pp;
+       *firstpp = res;
+       *pp = NULL;
+       for (p = res->child; p != NULL; p = p->sibling) {
+               p->parent = res;
+               DBG(KERN_INFO "PCI: reparented %s [%lx..%lx] under %s\n",
+                   p->name, p->start, p->end, res->name);
+       }
+       return 0;
+}
+
+/*
+ * A bridge has been allocated a range which is outside the range
+ * of its parent bridge, so it needs to be moved.
+ */
+static int __init
+pci_relocate_bridge_resource(struct pci_bus *bus, int i)
+{
+       struct resource *res, *pr, *conflict;
+       unsigned long try, size;
+       int j;
+       struct pci_bus *parent = bus->parent;
+
+       if (parent == NULL) {
+               /* shouldn't ever happen */
+               printk(KERN_ERR "PCI: can't move host bridge resource\n");
+               return -1;
+       }
+       res = bus->resource[i];
+       if (res == NULL)
+               return -1;
+       pr = NULL;
+       for (j = 0; j < 4; j++) {
+               struct resource *r = parent->resource[j];
+               if (!r)
+                       continue;
+               if ((res->flags ^ r->flags) & (IORESOURCE_IO | IORESOURCE_MEM))
+                       continue;
+               if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH)) {
+                       pr = r;
+                       break;
+               }
+               if (res->flags & IORESOURCE_PREFETCH)
+                       pr = r;
+       }
+       if (pr == NULL)
+               return -1;
+       size = res->end - res->start;
+       if (pr->start > pr->end || size > pr->end - pr->start)
+               return -1;
+       try = pr->end;
+       for (;;) {
+               res->start = try - size;
+               res->end = try;
+               if (probe_resource(bus->parent, pr, res, &conflict) == 0)
+                       break;
+               if (conflict->start <= pr->start + size)
+                       return -1;
+               try = conflict->start - 1;
+       }
+       if (request_resource(pr, res)) {
+               DBG(KERN_ERR "PCI: huh? couldn't move to %lx..%lx\n",
+                   res->start, res->end);
+               return -1;              /* "can't happen" */
+       }
+       update_bridge_base(bus, i);
+       printk(KERN_INFO "PCI: bridge %d resource %d moved to %lx..%lx\n",
+              bus->number, i, res->start, res->end);
+       return 0;
+}
+
+static int __init
+probe_resource(struct pci_bus *parent, struct resource *pr,
+              struct resource *res, struct resource **conflict)
+{
+       struct pci_bus *bus;
+       struct pci_dev *dev;
+       struct resource *r;
+       int i;
+
+       for (r = pr->child; r != NULL; r = r->sibling) {
+               if (r->end >= res->start && res->end >= r->start) {
+                       *conflict = r;
+                       return 1;
+               }
+       }
+       list_for_each_entry(bus, &parent->children, node) {
+               for (i = 0; i < 4; ++i) {
+                       if ((r = bus->resource[i]) == NULL)
+                               continue;
+                       if (!r->flags || r->start > r->end || r == res)
+                               continue;
+                       if (pci_find_parent_resource(bus->self, r) != pr)
+                               continue;
+                       if (r->end >= res->start && res->end >= r->start) {
+                               *conflict = r;
+                               return 1;
+                       }
+               }
+       }
+       list_for_each_entry(dev, &parent->devices, bus_list) {
+               for (i = 0; i < 6; ++i) {
+                       r = &dev->resource[i];
+                       if (!r->flags || (r->flags & IORESOURCE_UNSET))
+                               continue;
+                       if (pci_find_parent_resource(dev, r) != pr)
+                               continue;
+                       if (r->end >= res->start && res->end >= r->start) {
+                               *conflict = r;
+                               return 1;
+                       }
+               }
+       }
+       return 0;
+}
+
+static void __init
+update_bridge_base(struct pci_bus *bus, int i)
+{
+       struct resource *res = bus->resource[i];
+       u8 io_base_lo, io_limit_lo;
+       u16 mem_base, mem_limit;
+       u16 cmd;
+       unsigned long start, end, off;
+       struct pci_dev *dev = bus->self;
+       struct pci_controller *hose = dev->sysdata;
+
+       if (!hose) {
+               printk("update_bridge_base: no hose?\n");
+               return;
+       }
+       pci_read_config_word(dev, PCI_COMMAND, &cmd);
+       pci_write_config_word(dev, PCI_COMMAND,
+                             cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY));
+       if (res->flags & IORESOURCE_IO) {
+               off = (unsigned long) hose->io_base_virt - isa_io_base;
+               start = res->start - off;
+               end = res->end - off;
+               io_base_lo = (start >> 8) & PCI_IO_RANGE_MASK;
+               io_limit_lo = (end >> 8) & PCI_IO_RANGE_MASK;
+               if (end > 0xffff) {
+                       pci_write_config_word(dev, PCI_IO_BASE_UPPER16,
+                                             start >> 16);
+                       pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16,
+                                             end >> 16);
+                       io_base_lo |= PCI_IO_RANGE_TYPE_32;
+               } else
+                       io_base_lo |= PCI_IO_RANGE_TYPE_16;
+               pci_write_config_byte(dev, PCI_IO_BASE, io_base_lo);
+               pci_write_config_byte(dev, PCI_IO_LIMIT, io_limit_lo);
+
+       } else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
+                  == IORESOURCE_MEM) {
+               off = hose->pci_mem_offset;
+               mem_base = ((res->start - off) >> 16) & PCI_MEMORY_RANGE_MASK;
+               mem_limit = ((res->end - off) >> 16) & PCI_MEMORY_RANGE_MASK;
+               pci_write_config_word(dev, PCI_MEMORY_BASE, mem_base);
+               pci_write_config_word(dev, PCI_MEMORY_LIMIT, mem_limit);
+
+       } else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
+                  == (IORESOURCE_MEM | IORESOURCE_PREFETCH)) {
+               off = hose->pci_mem_offset;
+               mem_base = ((res->start - off) >> 16) & PCI_PREF_RANGE_MASK;
+               mem_limit = ((res->end - off) >> 16) & PCI_PREF_RANGE_MASK;
+               pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, mem_base);
+               pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, mem_limit);
+
+       } else {
+               DBG(KERN_ERR "PCI: ugh, bridge %s res %d has flags=%lx\n",
+                   pci_name(dev), i, res->flags);
+       }
+       pci_write_config_word(dev, PCI_COMMAND, cmd);
+}
+
+static inline void alloc_resource(struct pci_dev *dev, int idx)
+{
+       struct resource *pr, *r = &dev->resource[idx];
+
+       DBG("PCI:%s: Resource %d: %08lx-%08lx (f=%lx)\n",
+           pci_name(dev), idx, r->start, r->end, r->flags);
+       pr = pci_find_parent_resource(dev, r);
+       if (!pr || request_resource(pr, r) < 0) {
+               printk(KERN_ERR "PCI: Cannot allocate resource region %d"
+                      " of device %s\n", idx, pci_name(dev));
+               if (pr)
+                       DBG("PCI:  parent is %p: %08lx-%08lx (f=%lx)\n",
+                           pr, pr->start, pr->end, pr->flags);
+               /* We'll assign a new address later */
+               r->flags |= IORESOURCE_UNSET;
+               r->end -= r->start;
+               r->start = 0;
+       }
+}
+
+static void __init
+pcibios_allocate_resources(int pass)
+{
+       struct pci_dev *dev = NULL;
+       int idx, disabled;
+       u16 command;
+       struct resource *r;
+
+       for_each_pci_dev(dev) {
+               pci_read_config_word(dev, PCI_COMMAND, &command);
+               for (idx = 0; idx < 6; idx++) {
+                       r = &dev->resource[idx];
+                       if (r->parent)          /* Already allocated */
+                               continue;
+                       if (!r->flags || (r->flags & IORESOURCE_UNSET))
+                               continue;       /* Not assigned at all */
+                       if (r->flags & IORESOURCE_IO)
+                               disabled = !(command & PCI_COMMAND_IO);
+                       else
+                               disabled = !(command & PCI_COMMAND_MEMORY);
+                       if (pass == disabled)
+                               alloc_resource(dev, idx);
+               }
+               if (pass)
+                       continue;
+               r = &dev->resource[PCI_ROM_RESOURCE];
+               if (r->flags & IORESOURCE_ROM_ENABLE) {
+                       /* Turn the ROM off, leave the resource region, but keep it unregistered. */
+                       u32 reg;
+                       DBG("PCI: Switching off ROM of %s\n", pci_name(dev));
+                       r->flags &= ~IORESOURCE_ROM_ENABLE;
+                       pci_read_config_dword(dev, dev->rom_base_reg, &reg);
+                       pci_write_config_dword(dev, dev->rom_base_reg,
+                                              reg & ~PCI_ROM_ADDRESS_ENABLE);
+               }
+       }
+}
+
+static void __init
+pcibios_assign_resources(void)
+{
+       struct pci_dev *dev = NULL;
+       int idx;
+       struct resource *r;
+
+       for_each_pci_dev(dev) {
+               int class = dev->class >> 8;
+
+               /* Don't touch classless devices and host bridges */
+               if (!class || class == PCI_CLASS_BRIDGE_HOST)
+                       continue;
+
+               for (idx = 0; idx < 6; idx++) {
+                       r = &dev->resource[idx];
+
+                       /*
+                        * We shall assign a new address to this resource,
+                        * either because the BIOS (sic) forgot to do so
+                        * or because we have decided the old address was
+                        * unusable for some reason.
+                        */
+                       if ((r->flags & IORESOURCE_UNSET) && r->end &&
+                           (!ppc_md.pcibios_enable_device_hook ||
+                            !ppc_md.pcibios_enable_device_hook(dev, 1))) {
+                               r->flags &= ~IORESOURCE_UNSET;
+                               pci_assign_resource(dev, idx);
+                       }
+               }
+
+#if 0 /* don't assign ROMs */
+               r = &dev->resource[PCI_ROM_RESOURCE];
+               r->end -= r->start;
+               r->start = 0;
+               if (r->end)
+                       pci_assign_resource(dev, PCI_ROM_RESOURCE);
+#endif
+       }
+}
+
+
+int
+pcibios_enable_resources(struct pci_dev *dev, int mask)
+{
+       u16 cmd, old_cmd;
+       int idx;
+       struct resource *r;
+
+       pci_read_config_word(dev, PCI_COMMAND, &cmd);
+       old_cmd = cmd;
+       for (idx=0; idx<6; idx++) {
+               /* Only set up the requested stuff */
+               if (!(mask & (1<<idx)))
+                       continue;
+       
+               r = &dev->resource[idx];
+               if (r->flags & IORESOURCE_UNSET) {
+                       printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
+                       return -EINVAL;
+               }
+               if (r->flags & IORESOURCE_IO)
+                       cmd |= PCI_COMMAND_IO;
+               if (r->flags & IORESOURCE_MEM)
+                       cmd |= PCI_COMMAND_MEMORY;
+       }
+       if (dev->resource[PCI_ROM_RESOURCE].start)
+               cmd |= PCI_COMMAND_MEMORY;
+       if (cmd != old_cmd) {
+               printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
+               pci_write_config_word(dev, PCI_COMMAND, cmd);
+       }
+       return 0;
+}
+
+static int next_controller_index;
+
+struct pci_controller * __init
+pcibios_alloc_controller(void)
+{
+       struct pci_controller *hose;
+
+       hose = (struct pci_controller *)alloc_bootmem(sizeof(*hose));
+       memset(hose, 0, sizeof(struct pci_controller));
+
+       *hose_tail = hose;
+       hose_tail = &hose->next;
+
+       hose->index = next_controller_index++;
+
+       return hose;
+}
+
+#ifdef CONFIG_PPC_OF
+/*
+ * Functions below are used on OpenFirmware machines.
+ */
+static void
+make_one_node_map(struct device_node* node, u8 pci_bus)
+{
+       int *bus_range;
+       int len;
+
+       if (pci_bus >= pci_bus_count)
+               return;
+       bus_range = (int *) get_property(node, "bus-range", &len);
+       if (bus_range == NULL || len < 2 * sizeof(int)) {
+               printk(KERN_WARNING "Can't get bus-range for %s, "
+                      "assuming it starts at 0\n", node->full_name);
+               pci_to_OF_bus_map[pci_bus] = 0;
+       } else
+               pci_to_OF_bus_map[pci_bus] = bus_range[0];
+
+       for (node=node->child; node != 0;node = node->sibling) {
+               struct pci_dev* dev;
+               unsigned int *class_code, *reg;
+       
+               class_code = (unsigned int *) get_property(node, "class-code", NULL);
+               if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+                       (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
+                       continue;
+               reg = (unsigned int *)get_property(node, "reg", NULL);
+               if (!reg)
+                       continue;
+               dev = pci_find_slot(pci_bus, ((reg[0] >> 8) & 0xff));
+               if (!dev || !dev->subordinate)
+                       continue;
+               make_one_node_map(node, dev->subordinate->number);
+       }
+}
+       
+void
+pcibios_make_OF_bus_map(void)
+{
+       int i;
+       struct pci_controller* hose;
+       u8* of_prop_map;
+
+       pci_to_OF_bus_map = (u8*)kmalloc(pci_bus_count, GFP_KERNEL);
+       if (!pci_to_OF_bus_map) {
+               printk(KERN_ERR "Can't allocate OF bus map !\n");
+               return;
+       }
+
+       /* We fill the bus map with invalid values, that helps
+        * debugging.
+        */
+       for (i=0; i<pci_bus_count; i++)
+               pci_to_OF_bus_map[i] = 0xff;
+
+       /* For each hose, we begin searching bridges */
+       for(hose=hose_head; hose; hose=hose->next) {
+               struct device_node* node;       
+               node = (struct device_node *)hose->arch_data;
+               if (!node)
+                       continue;
+               make_one_node_map(node, hose->first_busno);
+       }
+       of_prop_map = get_property(find_path_device("/"), "pci-OF-bus-map", NULL);
+       if (of_prop_map)
+               memcpy(of_prop_map, pci_to_OF_bus_map, pci_bus_count);
+#ifdef DEBUG
+       printk("PCI->OF bus map:\n");
+       for (i=0; i<pci_bus_count; i++) {
+               if (pci_to_OF_bus_map[i] == 0xff)
+                       continue;
+               printk("%d -> %d\n", i, pci_to_OF_bus_map[i]);
+       }
+#endif
+}
+
+typedef int (*pci_OF_scan_iterator)(struct device_node* node, void* data);
+
+static struct device_node*
+scan_OF_pci_childs(struct device_node* node, pci_OF_scan_iterator filter, void* data)
+{
+       struct device_node* sub_node;
+
+       for (; node != 0;node = node->sibling) {
+               unsigned int *class_code;
+       
+               if (filter(node, data))
+                       return node;
+
+               /* For PCI<->PCI bridges or CardBus bridges, we go down
+                * Note: some OFs create a parent node "multifunc-device" as
+                * a fake root for all functions of a multi-function device,
+                * we go down them as well.
+                */
+               class_code = (unsigned int *) get_property(node, "class-code", NULL);
+               if ((!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+                       (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) &&
+                       strcmp(node->name, "multifunc-device"))
+                       continue;
+               sub_node = scan_OF_pci_childs(node->child, filter, data);
+               if (sub_node)
+                       return sub_node;
+       }
+       return NULL;
+}
+
+static int
+scan_OF_pci_childs_iterator(struct device_node* node, void* data)
+{
+       unsigned int *reg;
+       u8* fdata = (u8*)data;
+       
+       reg = (unsigned int *) get_property(node, "reg", NULL);
+       if (reg && ((reg[0] >> 8) & 0xff) == fdata[1]
+               && ((reg[0] >> 16) & 0xff) == fdata[0])
+               return 1;
+       return 0;
+}
+
+static struct device_node*
+scan_OF_childs_for_device(struct device_node* node, u8 bus, u8 dev_fn)
+{
+       u8 filter_data[2] = {bus, dev_fn};
+
+       return scan_OF_pci_childs(node, scan_OF_pci_childs_iterator, filter_data);
+}
+
+/*
+ * Scans the OF tree for a device node matching a PCI device
+ */
+struct device_node *
+pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
+{
+       struct pci_controller *hose;
+       struct device_node *node;
+       int busnr;
+
+       if (!have_of)
+               return NULL;
+       
+       /* Lookup the hose */
+       busnr = bus->number;
+       hose = pci_bus_to_hose(busnr);
+       if (!hose)
+               return NULL;
+
+       /* Check it has an OF node associated */
+       node = (struct device_node *) hose->arch_data;
+       if (!node)
+               return NULL;
+
+       /* Fixup bus number according to what OF think it is. */
+#ifdef CONFIG_PPC_PMAC
+       /* The G5 need a special case here. Basically, we don't remap all
+        * busses on it so we don't create the pci-OF-map. However, we do
+        * remap the AGP bus and so have to deal with it. A future better
+        * fix has to be done by making the remapping per-host and always
+        * filling the pci_to_OF map. --BenH
+        */
+       if (_machine == _MACH_Pmac && busnr >= 0xf0)
+               busnr -= 0xf0;
+       else
+#endif
+       if (pci_to_OF_bus_map)
+               busnr = pci_to_OF_bus_map[busnr];
+       if (busnr == 0xff)
+               return NULL;
+       
+       /* Now, lookup childs of the hose */
+       return scan_OF_childs_for_device(node->child, busnr, devfn);
+}
+EXPORT_SYMBOL(pci_busdev_to_OF_node);
+
+struct device_node*
+pci_device_to_OF_node(struct pci_dev *dev)
+{
+       return pci_busdev_to_OF_node(dev->bus, dev->devfn);
+}
+EXPORT_SYMBOL(pci_device_to_OF_node);
+
+/* This routine is meant to be used early during boot, when the
+ * PCI bus numbers have not yet been assigned, and you need to
+ * issue PCI config cycles to an OF device.
+ * It could also be used to "fix" RTAS config cycles if you want
+ * to set pci_assign_all_buses to 1 and still use RTAS for PCI
+ * config cycles.
+ */
+struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node)
+{
+       if (!have_of)
+               return NULL;
+       while(node) {
+               struct pci_controller* hose;
+               for (hose=hose_head;hose;hose=hose->next)
+                       if (hose->arch_data == node)
+                               return hose;
+               node=node->parent;
+       }
+       return NULL;
+}
+
+static int
+find_OF_pci_device_filter(struct device_node* node, void* data)
+{
+       return ((void *)node == data);
+}
+
+/*
+ * Returns the PCI device matching a given OF node
+ */
+int
+pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn)
+{
+       unsigned int *reg;
+       struct pci_controller* hose;
+       struct pci_dev* dev = NULL;
+       
+       if (!have_of)
+               return -ENODEV;
+       /* Make sure it's really a PCI device */
+       hose = pci_find_hose_for_OF_device(node);
+       if (!hose || !hose->arch_data)
+               return -ENODEV;
+       if (!scan_OF_pci_childs(((struct device_node*)hose->arch_data)->child,
+                       find_OF_pci_device_filter, (void *)node))
+               return -ENODEV;
+       reg = (unsigned int *) get_property(node, "reg", NULL);
+       if (!reg)
+               return -ENODEV;
+       *bus = (reg[0] >> 16) & 0xff;
+       *devfn = ((reg[0] >> 8) & 0xff);
+
+       /* Ok, here we need some tweak. If we have already renumbered
+        * all busses, we can't rely on the OF bus number any more.
+        * the pci_to_OF_bus_map is not enough as several PCI busses
+        * may match the same OF bus number.
+        */
+       if (!pci_to_OF_bus_map)
+               return 0;
+
+       for_each_pci_dev(dev)
+               if (pci_to_OF_bus_map[dev->bus->number] == *bus &&
+                               dev->devfn == *devfn) {
+                       *bus = dev->bus->number;
+                       pci_dev_put(dev);
+                       return 0;
+               }
+
+       return -ENODEV;
+}
+EXPORT_SYMBOL(pci_device_from_OF_node);
+
+void __init
+pci_process_bridge_OF_ranges(struct pci_controller *hose,
+                          struct device_node *dev, int primary)
+{
+       static unsigned int static_lc_ranges[256] __initdata;
+       unsigned int *dt_ranges, *lc_ranges, *ranges, *prev;
+       unsigned int size;
+       int rlen = 0, orig_rlen;
+       int memno = 0;
+       struct resource *res;
+       int np, na = prom_n_addr_cells(dev);
+       np = na + 5;
+
+       /* First we try to merge ranges to fix a problem with some pmacs
+        * that can have more than 3 ranges, fortunately using contiguous
+        * addresses -- BenH
+        */
+       dt_ranges = (unsigned int *) get_property(dev, "ranges", &rlen);
+       if (!dt_ranges)
+               return;
+       /* Sanity check, though hopefully that never happens */
+       if (rlen > sizeof(static_lc_ranges)) {
+               printk(KERN_WARNING "OF ranges property too large !\n");
+               rlen = sizeof(static_lc_ranges);
+       }
+       lc_ranges = static_lc_ranges;
+       memcpy(lc_ranges, dt_ranges, rlen);
+       orig_rlen = rlen;
+
+       /* Let's work on a copy of the "ranges" property instead of damaging
+        * the device-tree image in memory
+        */
+       ranges = lc_ranges;
+       prev = NULL;
+       while ((rlen -= np * sizeof(unsigned int)) >= 0) {
+               if (prev) {
+                       if (prev[0] == ranges[0] && prev[1] == ranges[1] &&
+                               (prev[2] + prev[na+4]) == ranges[2] &&
+                               (prev[na+2] + prev[na+4]) == ranges[na+2]) {
+                               prev[na+4] += ranges[na+4];
+                               ranges[0] = 0;
+                               ranges += np;
+                               continue;
+                       }
+               }
+               prev = ranges;
+               ranges += np;
+       }
+
+       /*
+        * The ranges property is laid out as an array of elements,
+        * each of which comprises:
+        *   cells 0 - 2:       a PCI address
+        *   cells 3 or 3+4:    a CPU physical address
+        *                      (size depending on dev->n_addr_cells)
+        *   cells 4+5 or 5+6:  the size of the range
+        */
+       ranges = lc_ranges;
+       rlen = orig_rlen;
+       while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) {
+               res = NULL;
+               size = ranges[na+4];
+               switch ((ranges[0] >> 24) & 0x3) {
+               case 1:         /* I/O space */
+                       if (ranges[2] != 0)
+                               break;
+                       hose->io_base_phys = ranges[na+2];
+                       /* limit I/O space to 16MB */
+                       if (size > 0x01000000)
+                               size = 0x01000000;
+                       hose->io_base_virt = ioremap(ranges[na+2], size);
+                       if (primary)
+                               isa_io_base = (unsigned long) hose->io_base_virt;
+                       res = &hose->io_resource;
+                       res->flags = IORESOURCE_IO;
+                       res->start = ranges[2];
+                       DBG("PCI: IO 0x%lx -> 0x%lx\n",
+                                   res->start, res->start + size - 1);
+                       break;
+               case 2:         /* memory space */
+                       memno = 0;
+                       if (ranges[1] == 0 && ranges[2] == 0
+                           && ranges[na+4] <= (16 << 20)) {
+                               /* 1st 16MB, i.e. ISA memory area */
+                               if (primary)
+                                       isa_mem_base = ranges[na+2];
+                               memno = 1;
+                       }
+                       while (memno < 3 && hose->mem_resources[memno].flags)
+                               ++memno;
+                       if (memno == 0)
+                               hose->pci_mem_offset = ranges[na+2] - ranges[2];
+                       if (memno < 3) {
+                               res = &hose->mem_resources[memno];
+                               res->flags = IORESOURCE_MEM;
+                               if(ranges[0] & 0x40000000)
+                                       res->flags |= IORESOURCE_PREFETCH;
+                               res->start = ranges[na+2];
+                               DBG("PCI: MEM[%d] 0x%lx -> 0x%lx\n", memno,
+                                           res->start, res->start + size - 1);
+                       }
+                       break;
+               }
+               if (res != NULL) {
+                       res->name = dev->full_name;
+                       res->end = res->start + size - 1;
+                       res->parent = NULL;
+                       res->sibling = NULL;
+                       res->child = NULL;
+               }
+               ranges += np;
+       }
+}
+
+/* We create the "pci-OF-bus-map" property now so it appears in the
+ * /proc device tree
+ */
+void __init
+pci_create_OF_bus_map(void)
+{
+       struct property* of_prop;
+       
+       of_prop = (struct property*) alloc_bootmem(sizeof(struct property) + 256);
+       if (of_prop && find_path_device("/")) {
+               memset(of_prop, -1, sizeof(struct property) + 256);
+               of_prop->name = "pci-OF-bus-map";
+               of_prop->length = 256;
+               of_prop->value = (unsigned char *)&of_prop[1];
+               prom_add_property(find_path_device("/"), of_prop);
+       }
+}
+
+static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf)
+{
+       struct pci_dev *pdev;
+       struct device_node *np;
+
+       pdev = to_pci_dev (dev);
+       np = pci_device_to_OF_node(pdev);
+       if (np == NULL || np->full_name == NULL)
+               return 0;
+       return sprintf(buf, "%s", np->full_name);
+}
+static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
+
+#else /* CONFIG_PPC_OF */
+void pcibios_make_OF_bus_map(void)
+{
+}
+#endif /* CONFIG_PPC_OF */
+
+/* Add sysfs properties */
+void pcibios_add_platform_entries(struct pci_dev *pdev)
+{
+#ifdef CONFIG_PPC_OF
+       device_create_file(&pdev->dev, &dev_attr_devspec);
+#endif /* CONFIG_PPC_OF */
+}
+
+
+#ifdef CONFIG_PPC_PMAC
+/*
+ * This set of routines checks for PCI<->PCI bridges that have closed
+ * IO resources and have child devices. It tries to re-open an IO
+ * window on them.
+ *
+ * This is a _temporary_ fix to workaround a problem with Apple's OF
+ * closing IO windows on P2P bridges when the OF drivers of cards
+ * below this bridge don't claim any IO range (typically ATI or
+ * Adaptec).
+ *
+ * A more complete fix would be to use drivers/pci/setup-bus.c, which
+ * involves a working pcibios_fixup_pbus_ranges(), some more care about
+ * ordering when creating the host bus resources, and maybe a few more
+ * minor tweaks
+ */
+
+/* Initialize bridges with base/limit values we have collected */
+static void __init
+do_update_p2p_io_resource(struct pci_bus *bus, int enable_vga)
+{
+       struct pci_dev *bridge = bus->self;
+       struct pci_controller* hose = (struct pci_controller *)bridge->sysdata;
+       u32 l;
+       u16 w;
+       struct resource res;
+
+       if (bus->resource[0] == NULL)
+               return;
+       res = *(bus->resource[0]);
+
+       DBG("Remapping Bus %d, bridge: %s\n", bus->number, pci_name(bridge));
+       res.start -= ((unsigned long) hose->io_base_virt - isa_io_base);
+       res.end -= ((unsigned long) hose->io_base_virt - isa_io_base);
+       DBG("  IO window: %08lx-%08lx\n", res.start, res.end);
+
+       /* Set up the top and bottom of the PCI I/O segment for this bus. */
+       pci_read_config_dword(bridge, PCI_IO_BASE, &l);
+       l &= 0xffff000f;
+       l |= (res.start >> 8) & 0x00f0;
+       l |= res.end & 0xf000;
+       pci_write_config_dword(bridge, PCI_IO_BASE, l);
+
+       if ((l & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
+               l = (res.start >> 16) | (res.end & 0xffff0000);
+               pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, l);
+       }
+
+       pci_read_config_word(bridge, PCI_COMMAND, &w);
+       w |= PCI_COMMAND_IO;
+       pci_write_config_word(bridge, PCI_COMMAND, w);
+
+#if 0 /* Enabling this causes XFree 4.2.0 to hang during PCI probe */
+       if (enable_vga) {
+               pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, &w);
+               w |= PCI_BRIDGE_CTL_VGA;
+               pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, w);
+       }
+#endif
+}
+
+/* This function is pretty basic and actually quite broken for the
+ * general case, it's enough for us right now though. It's supposed
+ * to tell us if we need to open an IO range at all or not and what
+ * size.
+ */
+static int __init
+check_for_io_childs(struct pci_bus *bus, struct resource* res, int *found_vga)
+{
+       struct pci_dev *dev;
+       int     i;
+       int     rc = 0;
+
+#define push_end(res, size) do { unsigned long __sz = (size) ; \
+       res->end = ((res->end + __sz) / (__sz + 1)) * (__sz + 1) + __sz; \
+    } while (0)
+
+       list_for_each_entry(dev, &bus->devices, bus_list) {
+               u16 class = dev->class >> 8;
+
+               if (class == PCI_CLASS_DISPLAY_VGA ||
+                   class == PCI_CLASS_NOT_DEFINED_VGA)
+                       *found_vga = 1;
+               if (class >> 8 == PCI_BASE_CLASS_BRIDGE && dev->subordinate)
+                       rc |= check_for_io_childs(dev->subordinate, res, found_vga);
+               if (class == PCI_CLASS_BRIDGE_CARDBUS)
+                       push_end(res, 0xfff);
+
+               for (i=0; i<PCI_NUM_RESOURCES; i++) {
+                       struct resource *r;
+                       unsigned long r_size;
+
+                       if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI
+                           && i >= PCI_BRIDGE_RESOURCES)
+                               continue;
+                       r = &dev->resource[i];
+                       r_size = r->end - r->start;
+                       if (r_size < 0xfff)
+                               r_size = 0xfff;
+                       if (r->flags & IORESOURCE_IO && (r_size) != 0) {
+                               rc = 1;
+                               push_end(res, r_size);
+                       }
+               }
+       }
+
+       return rc;
+}
+
+/* Here we scan all P2P bridges of a given level that have a closed
+ * IO window. Note that the test for the presence of a VGA card should
+ * be improved to take into account already configured P2P bridges,
+ * currently, we don't see them and might end up configuring 2 bridges
+ * with VGA pass through enabled
+ */
+static void __init
+do_fixup_p2p_level(struct pci_bus *bus)
+{
+       struct pci_bus *b;
+       int i, parent_io;
+       int has_vga = 0;
+
+       for (parent_io=0; parent_io<4; parent_io++)
+               if (bus->resource[parent_io]
+                   && bus->resource[parent_io]->flags & IORESOURCE_IO)
+                       break;
+       if (parent_io >= 4)
+               return;
+
+       list_for_each_entry(b, &bus->children, node) {
+               struct pci_dev *d = b->self;
+               struct pci_controller* hose = (struct pci_controller *)d->sysdata;
+               struct resource *res = b->resource[0];
+               struct resource tmp_res;
+               unsigned long max;
+               int found_vga = 0;
+
+               memset(&tmp_res, 0, sizeof(tmp_res));
+               tmp_res.start = bus->resource[parent_io]->start;
+
+               /* We don't let low addresses go through that closed P2P bridge, well,
+                * that may not be necessary but I feel safer that way
+                */
+               if (tmp_res.start == 0)
+                       tmp_res.start = 0x1000;
+       
+               if (!list_empty(&b->devices) && res && res->flags == 0 &&
+                   res != bus->resource[parent_io] &&
+                   (d->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
+                   check_for_io_childs(b, &tmp_res, &found_vga)) {
+                       u8 io_base_lo;
+
+                       printk(KERN_INFO "Fixing up IO bus %s\n", b->name);
+
+                       if (found_vga) {
+                               if (has_vga) {
+                                       printk(KERN_WARNING "Skipping VGA, already active"
+                                           " on bus segment\n");
+                                       found_vga = 0;
+                               } else
+                                       has_vga = 1;
+                       }
+                       pci_read_config_byte(d, PCI_IO_BASE, &io_base_lo);
+
+                       if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32)
+                               max = ((unsigned long) hose->io_base_virt
+                                       - isa_io_base) + 0xffffffff;
+                       else
+                               max = ((unsigned long) hose->io_base_virt
+                                       - isa_io_base) + 0xffff;
+
+                       *res = tmp_res;
+                       res->flags = IORESOURCE_IO;
+                       res->name = b->name;
+               
+                       /* Find a resource in the parent where we can allocate */
+                       for (i = 0 ; i < 4; i++) {
+                               struct resource *r = bus->resource[i];
+                               if (!r)
+                                       continue;
+                               if ((r->flags & IORESOURCE_IO) == 0)
+                                       continue;
+                               DBG("Trying to allocate from %08lx, size %08lx from parent"
+                                   " res %d: %08lx -> %08lx\n",
+                                       res->start, res->end, i, r->start, r->end);
+                       
+                               if (allocate_resource(r, res, res->end + 1, res->start, max,
+                                   res->end + 1, NULL, NULL) < 0) {
+                                       DBG("Failed !\n");
+                                       continue;
+                               }
+                               do_update_p2p_io_resource(b, found_vga);
+                               break;
+                       }
+               }
+               do_fixup_p2p_level(b);
+       }
+}
+
+static void
+pcibios_fixup_p2p_bridges(void)
+{
+       struct pci_bus *b;
+
+       list_for_each_entry(b, &pci_root_buses, node)
+               do_fixup_p2p_level(b);
+}
+
+#endif /* CONFIG_PPC_PMAC */
+
+static int __init
+pcibios_init(void)
+{
+       struct pci_controller *hose;
+       struct pci_bus *bus;
+       int next_busno;
+
+       printk(KERN_INFO "PCI: Probing PCI hardware\n");
+
+       /* Scan all of the recorded PCI controllers.  */
+       for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
+               if (pci_assign_all_buses)
+                       hose->first_busno = next_busno;
+               hose->last_busno = 0xff;
+               bus = pci_scan_bus(hose->first_busno, hose->ops, hose);
+               hose->last_busno = bus->subordinate;
+               if (pci_assign_all_buses || next_busno <= hose->last_busno)
+                       next_busno = hose->last_busno + pcibios_assign_bus_offset;
+       }
+       pci_bus_count = next_busno;
+
+       /* OpenFirmware based machines need a map of OF bus
+        * numbers vs. kernel bus numbers since we may have to
+        * remap them.
+        */
+       if (pci_assign_all_buses && have_of)
+               pcibios_make_OF_bus_map();
+
+       /* Do machine dependent PCI interrupt routing */
+       if (ppc_md.pci_swizzle && ppc_md.pci_map_irq)
+               pci_fixup_irqs(ppc_md.pci_swizzle, ppc_md.pci_map_irq);
+
+       /* Call machine dependent fixup */
+       if (ppc_md.pcibios_fixup)
+               ppc_md.pcibios_fixup();
+
+       /* Allocate and assign resources */
+       pcibios_allocate_bus_resources(&pci_root_buses);
+       pcibios_allocate_resources(0);
+       pcibios_allocate_resources(1);
+#ifdef CONFIG_PPC_PMAC
+       pcibios_fixup_p2p_bridges();
+#endif /* CONFIG_PPC_PMAC */
+       pcibios_assign_resources();
+
+       /* Call machine dependent post-init code */
+       if (ppc_md.pcibios_after_init)
+               ppc_md.pcibios_after_init();
+
+       return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+unsigned char __init
+common_swizzle(struct pci_dev *dev, unsigned char *pinp)
+{
+       struct pci_controller *hose = dev->sysdata;
+
+       if (dev->bus->number != hose->first_busno) {
+               u8 pin = *pinp;
+               do {
+                       pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
+                       /* Move up the chain of bridges. */
+                       dev = dev->bus->self;
+               } while (dev->bus->self);
+               *pinp = pin;
+
+               /* The slot is the idsel of the last bridge. */
+       }
+       return PCI_SLOT(dev->devfn);
+}
+
+unsigned long resource_fixup(struct pci_dev * dev, struct resource * res,
+                            unsigned long start, unsigned long size)
+{
+       return start;
+}
+
+void __init pcibios_fixup_bus(struct pci_bus *bus)
+{
+       struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
+       unsigned long io_offset;
+       struct resource *res;
+       int i;
+
+       io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
+       if (bus->parent == NULL) {
+               /* This is a host bridge - fill in its resources */
+               hose->bus = bus;
+
+               bus->resource[0] = res = &hose->io_resource;
+               if (!res->flags) {
+                       if (io_offset)
+                               printk(KERN_ERR "I/O resource not set for host"
+                                      " bridge %d\n", hose->index);
+                       res->start = 0;
+                       res->end = IO_SPACE_LIMIT;
+                       res->flags = IORESOURCE_IO;
+               }
+               res->start += io_offset;
+               res->end += io_offset;
+
+               for (i = 0; i < 3; ++i) {
+                       res = &hose->mem_resources[i];
+                       if (!res->flags) {
+                               if (i > 0)
+                                       continue;
+                               printk(KERN_ERR "Memory resource not set for "
+                                      "host bridge %d\n", hose->index);
+                               res->start = hose->pci_mem_offset;
+                               res->end = ~0U;
+                               res->flags = IORESOURCE_MEM;
+                       }
+                       bus->resource[i+1] = res;
+               }
+       } else {
+               /* This is a subordinate bridge */
+               pci_read_bridge_bases(bus);
+
+               for (i = 0; i < 4; ++i) {
+                       if ((res = bus->resource[i]) == NULL)
+                               continue;
+                       if (!res->flags)
+                               continue;
+                       if (io_offset && (res->flags & IORESOURCE_IO)) {
+                               res->start += io_offset;
+                               res->end += io_offset;
+                       } else if (hose->pci_mem_offset
+                                  && (res->flags & IORESOURCE_MEM)) {
+                               res->start += hose->pci_mem_offset;
+                               res->end += hose->pci_mem_offset;
+                       }
+               }
+       }
+
+       if (ppc_md.pcibios_fixup_bus)
+               ppc_md.pcibios_fixup_bus(bus);
+}
+
+char __init *pcibios_setup(char *str)
+{
+       return str;
+}
+
+/* the next one is stolen from the alpha port... */
+void __init
+pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+       pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+       /* XXX FIXME - update OF device tree node interrupt property */
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+       u16 cmd, old_cmd;
+       int idx;
+       struct resource *r;
+
+       if (ppc_md.pcibios_enable_device_hook)
+               if (ppc_md.pcibios_enable_device_hook(dev, 0))
+                       return -EINVAL;
+               
+       pci_read_config_word(dev, PCI_COMMAND, &cmd);
+       old_cmd = cmd;
+       for (idx=0; idx<6; idx++) {
+               r = &dev->resource[idx];
+               if (r->flags & IORESOURCE_UNSET) {
+                       printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
+                       return -EINVAL;
+               }
+               if (r->flags & IORESOURCE_IO)
+                       cmd |= PCI_COMMAND_IO;
+               if (r->flags & IORESOURCE_MEM)
+                       cmd |= PCI_COMMAND_MEMORY;
+       }
+       if (cmd != old_cmd) {
+               printk("PCI: Enabling device %s (%04x -> %04x)\n",
+                      pci_name(dev), old_cmd, cmd);
+               pci_write_config_word(dev, PCI_COMMAND, cmd);
+       }
+       return 0;
+}
+
+struct pci_controller*
+pci_bus_to_hose(int bus)
+{
+       struct pci_controller* hose = hose_head;
+
+       for (; hose; hose = hose->next)
+               if (bus >= hose->first_busno && bus <= hose->last_busno)
+                       return hose;
+       return NULL;
+}
+
+void __iomem *
+pci_bus_io_base(unsigned int bus)
+{
+       struct pci_controller *hose;
+
+       hose = pci_bus_to_hose(bus);
+       if (!hose)
+               return NULL;
+       return hose->io_base_virt;
+}
+
+unsigned long
+pci_bus_io_base_phys(unsigned int bus)
+{
+       struct pci_controller *hose;
+
+       hose = pci_bus_to_hose(bus);
+       if (!hose)
+               return 0;
+       return hose->io_base_phys;
+}
+
+unsigned long
+pci_bus_mem_base_phys(unsigned int bus)
+{
+       struct pci_controller *hose;
+
+       hose = pci_bus_to_hose(bus);
+       if (!hose)
+               return 0;
+       return hose->pci_mem_offset;
+}
+
+unsigned long
+pci_resource_to_bus(struct pci_dev *pdev, struct resource *res)
+{
+       /* Hack alert again ! See comments in chrp_pci.c
+        */
+       struct pci_controller* hose =
+               (struct pci_controller *)pdev->sysdata;
+       if (hose && res->flags & IORESOURCE_MEM)
+               return res->start - hose->pci_mem_offset;
+       /* We may want to do something with IOs here... */
+       return res->start;
+}
+
+
+static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
+                                              unsigned long *offset,
+                                              enum pci_mmap_state mmap_state)
+{
+       struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
+       unsigned long io_offset = 0;
+       int i, res_bit;
+
+       if (hose == 0)
+               return NULL;            /* should never happen */
+
+       /* If memory, add on the PCI bridge address offset */
+       if (mmap_state == pci_mmap_mem) {
+               *offset += hose->pci_mem_offset;
+               res_bit = IORESOURCE_MEM;
+       } else {
+               io_offset = hose->io_base_virt - ___IO_BASE;
+               *offset += io_offset;
+               res_bit = IORESOURCE_IO;
+       }
+
+       /*
+        * Check that the offset requested corresponds to one of the
+        * resources of the device.
+        */
+       for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+               struct resource *rp = &dev->resource[i];
+               int flags = rp->flags;
+
+               /* treat ROM as memory (should be already) */
+               if (i == PCI_ROM_RESOURCE)
+                       flags |= IORESOURCE_MEM;
+
+               /* Active and same type? */
+               if ((flags & res_bit) == 0)
+                       continue;
+
+               /* In the range of this resource? */
+               if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end)
+                       continue;
+
+               /* found it! construct the final physical address */
+               if (mmap_state == pci_mmap_io)
+                       *offset += hose->io_base_phys - io_offset;
+               return rp;
+       }
+
+       return NULL;
+}
+
+/*
+ * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
+ * device mapping.
+ */
+static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
+                                     pgprot_t protection,
+                                     enum pci_mmap_state mmap_state,
+                                     int write_combine)
+{
+       unsigned long prot = pgprot_val(protection);
+
+       /* Write combine is always 0 on non-memory space mappings. On
+        * memory space, if the user didn't pass 1, we check for a
+        * "prefetchable" resource. This is a bit hackish, but we use
+        * this to workaround the inability of /sysfs to provide a write
+        * combine bit
+        */
+       if (mmap_state != pci_mmap_mem)
+               write_combine = 0;
+       else if (write_combine == 0) {
+               if (rp->flags & IORESOURCE_PREFETCH)
+                       write_combine = 1;
+       }
+
+       /* XXX would be nice to have a way to ask for write-through */
+       prot |= _PAGE_NO_CACHE;
+       if (write_combine)
+               prot &= ~_PAGE_GUARDED;
+       else
+               prot |= _PAGE_GUARDED;
+
+       printk("PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start,
+              prot);
+
+       return __pgprot(prot);
+}
+
+/*
+ * This one is used by /dev/mem and fbdev who have no clue about the
+ * PCI device, it tries to find the PCI device first and calls the
+ * above routine
+ */
+pgprot_t pci_phys_mem_access_prot(struct file *file,
+                                 unsigned long pfn,
+                                 unsigned long size,
+                                 pgprot_t protection)
+{
+       struct pci_dev *pdev = NULL;
+       struct resource *found = NULL;
+       unsigned long prot = pgprot_val(protection);
+       unsigned long offset = pfn << PAGE_SHIFT;
+       int i;
+
+       if (page_is_ram(pfn))
+               return prot;
+
+       prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;
+
+       for_each_pci_dev(pdev) {
+               for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+                       struct resource *rp = &pdev->resource[i];
+                       int flags = rp->flags;
+
+                       /* Active and same type? */
+                       if ((flags & IORESOURCE_MEM) == 0)
+                               continue;
+                       /* In the range of this resource? */
+                       if (offset < (rp->start & PAGE_MASK) ||
+                           offset > rp->end)
+                               continue;
+                       found = rp;
+                       break;
+               }
+               if (found)
+                       break;
+       }
+       if (found) {
+               if (found->flags & IORESOURCE_PREFETCH)
+                       prot &= ~_PAGE_GUARDED;
+               pci_dev_put(pdev);
+       }
+
+       DBG("non-PCI map for %lx, prot: %lx\n", offset, prot);
+
+       return __pgprot(prot);
+}
+
+
+/*
+ * Perform the actual remap of the pages for a PCI device mapping, as
+ * appropriate for this architecture.  The region in the process to map
+ * is described by vm_start and vm_end members of VMA, the base physical
+ * address is found in vm_pgoff.
+ * The pci device structure is provided so that architectures may make mapping
+ * decisions on a per-device or per-bus basis.
+ *
+ * Returns a negative error code on failure, zero on success.
+ */
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+                       enum pci_mmap_state mmap_state,
+                       int write_combine)
+{
+       unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+       struct resource *rp;
+       int ret;
+
+       rp = __pci_mmap_make_offset(dev, &offset, mmap_state);
+       if (rp == NULL)
+               return -EINVAL;
+
+       vma->vm_pgoff = offset >> PAGE_SHIFT;
+       vma->vm_flags |= VM_SHM | VM_LOCKED | VM_IO;
+       vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
+                                                 vma->vm_page_prot,
+                                                 mmap_state, write_combine);
+
+       ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+                              vma->vm_end - vma->vm_start, vma->vm_page_prot);
+
+       return ret;
+}
+
+/* Obsolete functions. Should be removed once the symbios driver
+ * is fixed
+ */
+unsigned long
+phys_to_bus(unsigned long pa)
+{
+       struct pci_controller *hose;
+       int i;
+
+       for (hose = hose_head; hose; hose = hose->next) {
+               for (i = 0; i < 3; ++i) {
+                       if (pa >= hose->mem_resources[i].start
+                           && pa <= hose->mem_resources[i].end) {
+                               /*
+                                * XXX the hose->pci_mem_offset really
+                                * only applies to mem_resources[0].
+                                * We need a way to store an offset for
+                                * the others.  -- paulus
+                                */
+                               if (i == 0)
+                                       pa -= hose->pci_mem_offset;
+                               return pa;
+                       }
+               }
+       }
+       /* hmmm, didn't find it */
+       return 0;
+}
+
+unsigned long
+pci_phys_to_bus(unsigned long pa, int busnr)
+{
+       struct pci_controller* hose = pci_bus_to_hose(busnr);
+       if (!hose)
+               return pa;
+       return pa - hose->pci_mem_offset;
+}
+
+unsigned long
+pci_bus_to_phys(unsigned int ba, int busnr)
+{
+       struct pci_controller* hose = pci_bus_to_hose(busnr);
+       if (!hose)
+               return ba;
+       return ba + hose->pci_mem_offset;
+}
+
+/* Provide information on locations of various I/O regions in physical
+ * memory.  Do this on a per-card basis so that we choose the right
+ * root bridge.
+ * Note that the returned IO or memory base is a physical address
+ */
+
+long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
+{
+       struct pci_controller* hose;
+       long result = -EOPNOTSUPP;
+
+       /* Argh ! Please forgive me for that hack, but that's the
+        * simplest way to get existing XFree to not lockup on some
+        * G5 machines... So when something asks for bus 0 io base
+        * (bus 0 is HT root), we return the AGP one instead.
+        */
+#ifdef CONFIG_PPC_PMAC
+       if (_machine == _MACH_Pmac && machine_is_compatible("MacRISC4"))
+               if (bus == 0)
+                       bus = 0xf0;
+#endif /* CONFIG_PPC_PMAC */
+
+       hose = pci_bus_to_hose(bus);
+       if (!hose)
+               return -ENODEV;
+
+       switch (which) {
+       case IOBASE_BRIDGE_NUMBER:
+               return (long)hose->first_busno;
+       case IOBASE_MEMORY:
+               return (long)hose->pci_mem_offset;
+       case IOBASE_IO:
+               return (long)hose->io_base_phys;
+       case IOBASE_ISA_IO:
+               return (long)isa_io_base;
+       case IOBASE_ISA_MEM:
+               return (long)isa_mem_base;
+       }
+
+       return result;
+}
+
+void pci_resource_to_user(const struct pci_dev *dev, int bar,
+                         const struct resource *rsrc,
+                         u64 *start, u64 *end)
+{
+       struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
+       unsigned long offset = 0;
+
+       if (hose == NULL)
+               return;
+
+       if (rsrc->flags & IORESOURCE_IO)
+               offset = ___IO_BASE - hose->io_base_virt + hose->io_base_phys;
+
+       *start = rsrc->start + offset;
+       *end = rsrc->end + offset;
+}
+
+void __init
+pci_init_resource(struct resource *res, unsigned long start, unsigned long end,
+                 int flags, char *name)
+{
+       res->start = start;
+       res->end = end;
+       res->flags = flags;
+       res->name = name;
+       res->parent = NULL;
+       res->sibling = NULL;
+       res->child = NULL;
+}
+
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
+{
+       unsigned long start = pci_resource_start(dev, bar);
+       unsigned long len = pci_resource_len(dev, bar);
+       unsigned long flags = pci_resource_flags(dev, bar);
+
+       if (!len)
+               return NULL;
+       if (max && len > max)
+               len = max;
+       if (flags & IORESOURCE_IO)
+               return ioport_map(start, len);
+       if (flags & IORESOURCE_MEM)
+               /* Not checking IORESOURCE_CACHEABLE because PPC does
+                * not currently distinguish between ioremap and
+                * ioremap_nocache.
+                */
+               return ioremap(start, len);
+       /* What? */
+       return NULL;
+}
+
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{
+       /* Nothing to do */
+}
+EXPORT_SYMBOL(pci_iomap);
+EXPORT_SYMBOL(pci_iounmap);
+
+unsigned long pci_address_to_pio(phys_addr_t address)
+{
+       struct pci_controller* hose = hose_head;
+
+       for (; hose; hose = hose->next) {
+               unsigned int size = hose->io_resource.end -
+                       hose->io_resource.start + 1;
+               if (address >= hose->io_base_phys &&
+                   address < (hose->io_base_phys + size)) {
+                       unsigned long base =
+                               (unsigned long)hose->io_base_virt - _IO_BASE;
+                       return base + (address - hose->io_base_phys);
+               }
+       }
+       return (unsigned int)-1;
+}
+EXPORT_SYMBOL(pci_address_to_pio);
+
+/*
+ * Null PCI config access functions, for the case when we can't
+ * find a hose.
+ */
+#define NULL_PCI_OP(rw, size, type)                                    \
+static int                                                             \
+null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)   \
+{                                                                      \
+       return PCIBIOS_DEVICE_NOT_FOUND;                                \
+}
+
+static int
+null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+                int len, u32 *val)
+{
+       return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int
+null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+                 int len, u32 val)
+{
+       return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static struct pci_ops null_pci_ops =
+{
+       null_read_config,
+       null_write_config
+};
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_bus *
+fake_pci_bus(struct pci_controller *hose, int busnr)
+{
+       static struct pci_bus bus;
+
+       if (hose == 0) {
+               hose = pci_bus_to_hose(busnr);
+               if (hose == 0)
+                       printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
+       }
+       bus.number = busnr;
+       bus.sysdata = hose;
+       bus.ops = hose? hose->ops: &null_pci_ops;
+       return &bus;
+}
+
+#define EARLY_PCI_OP(rw, size, type)                                   \
+int early_##rw##_config_##size(struct pci_controller *hose, int bus,   \
+                              int devfn, int offset, type value)       \
+{                                                                      \
+       return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),    \
+                                           devfn, offset, value);      \
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
index 647da4c1d21993fe26145214b77489b57515695d..e399bbb969a4735ad4b30918eba1881210d8ac7b 100644 (file)
@@ -40,7 +40,6 @@ obj-$(CONFIG_6xx)             += l2cr.o cpu_setup_6xx.o
 obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
 obj-$(CONFIG_MODULES)          += module.o
 obj-$(CONFIG_NOT_COHERENT_CACHE)       += dma-mapping.o
-obj-$(CONFIG_PCI)              += pci.o
 obj-$(CONFIG_KGDB)             += ppc-stub.o
 obj-$(CONFIG_TAU)              += temp.o
 ifndef CONFIG_E200