]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
tty: kref usage for isicom and moxa
authorAlan Cox <alan@redhat.com>
Mon, 13 Oct 2008 09:39:58 +0000 (10:39 +0100)
committerLinus Torvalds <torvalds@linux-foundation.org>
Mon, 13 Oct 2008 16:51:41 +0000 (09:51 -0700)
Rather than blindly keep taking krefs we reorder the code in a few places
to pass the tty down to the right place (which is important as from the user
side it is not the case that tty == port->tty in all situations). For the irq
and related paths use the krefs to stop the tty being freed under us.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/char/isicom.c
drivers/char/moxa.c

index 8f7cc190b62d420116b5c0d30e70899c3332c94d..7d30ee1d3fca9de33cb5e23790fd6df96c791e05 100644 (file)
@@ -421,17 +421,16 @@ static void isicom_tx(unsigned long _data)
        if (retries >= 100)
                goto unlock;
 
+       tty = tty_port_tty_get(&port->port);
+       if (tty == NULL)
+               goto put_unlock;
+
        for (; count > 0; count--, port++) {
                /* port not active or tx disabled to force flow control */
                if (!(port->port.flags & ASYNC_INITIALIZED) ||
                                !(port->status & ISI_TXOK))
                        continue;
 
-               tty = port->port.tty;
-
-               if (tty == NULL)
-                       continue;
-
                txcount = min_t(short, TX_SIZE, port->xmit_cnt);
                if (txcount <= 0 || tty->stopped || tty->hw_stopped)
                        continue;
@@ -489,6 +488,8 @@ static void isicom_tx(unsigned long _data)
                        tty_wakeup(tty);
        }
 
+put_unlock:
+       tty_kref_put(tty);
 unlock:
        spin_unlock_irqrestore(&isi_card[card].card_lock, flags);
        /*      schedule another tx for hopefully in about 10ms */
@@ -547,7 +548,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
                return IRQ_HANDLED;
        }
 
-       tty = port->port.tty;
+       tty = tty_port_tty_get(&port->port);
        if (tty == NULL) {
                word_count = byte_count >> 1;
                while (byte_count > 1) {
@@ -588,7 +589,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
                        }
 
                        if (port->port.flags & ASYNC_CTS_FLOW) {
-                               if (port->port.tty->hw_stopped) {
+                               if (tty->hw_stopped) {
                                        if (header & ISI_CTS) {
                                                port->port.tty->hw_stopped = 0;
                                                /* start tx ing */
@@ -597,7 +598,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
                                                tty_wakeup(tty);
                                        }
                                } else if (!(header & ISI_CTS)) {
-                                       port->port.tty->hw_stopped = 1;
+                                       tty->hw_stopped = 1;
                                        /* stop tx ing */
                                        port->status &= ~(ISI_TXOK | ISI_CTS);
                                }
@@ -660,24 +661,21 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
        }
        outw(0x0000, base+0x04); /* enable interrupts */
        spin_unlock(&card->card_lock);
+       tty_kref_put(tty);
 
        return IRQ_HANDLED;
 }
 
-static void isicom_config_port(struct isi_port *port)
+static void isicom_config_port(struct tty_struct *tty)
 {
+       struct isi_port *port = tty->driver_data;
        struct isi_board *card = port->card;
-       struct tty_struct *tty;
        unsigned long baud;
        unsigned long base = card->base;
        u16 channel_setup, channel = port->channel,
                shift_count = card->shift_count;
        unsigned char flow_ctrl;
 
-       tty = port->port.tty;
-
-       if (tty == NULL)
-               return;
        /* FIXME: Switch to new tty baud API */
        baud = C_BAUD(tty);
        if (baud & CBAUDEX) {
@@ -690,7 +688,7 @@ static void isicom_config_port(struct isi_port *port)
 
                /* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */
                if (baud < 1 || baud > 4)
-                       port->port.tty->termios->c_cflag &= ~CBAUDEX;
+                       tty->termios->c_cflag &= ~CBAUDEX;
                else
                        baud += 15;
        }
@@ -797,8 +795,9 @@ static inline void isicom_setup_board(struct isi_board *bp)
        spin_unlock_irqrestore(&bp->card_lock, flags);
 }
 
-static int isicom_setup_port(struct isi_port *port)
+static int isicom_setup_port(struct tty_struct *tty)
 {
+       struct isi_port *port = tty->driver_data;
        struct isi_board *card = port->card;
        unsigned long flags;
 
@@ -808,8 +807,7 @@ static int isicom_setup_port(struct isi_port *port)
                return -ENOMEM;
 
        spin_lock_irqsave(&card->card_lock, flags);
-       if (port->port.tty)
-               clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
+       clear_bit(TTY_IO_ERROR, &tty->flags);
        if (port->port.count == 1)
                card->count++;
 
@@ -823,7 +821,7 @@ static int isicom_setup_port(struct isi_port *port)
                InterruptTheCard(card->base);
        }
 
-       isicom_config_port(port);
+       isicom_config_port(tty);
        port->port.flags |= ASYNC_INITIALIZED;
        spin_unlock_irqrestore(&card->card_lock, flags);
 
@@ -934,8 +932,8 @@ static int isicom_open(struct tty_struct *tty, struct file *filp)
 
        port->port.count++;
        tty->driver_data = port;
-       port->port.tty = tty;
-       error = isicom_setup_port(port);
+       tty_port_tty_set(&port->port, tty);
+       error = isicom_setup_port(tty);
        if (error == 0)
                error = block_til_ready(tty, filp, port);
        return error;
@@ -955,15 +953,17 @@ static void isicom_shutdown_port(struct isi_port *port)
        struct isi_board *card = port->card;
        struct tty_struct *tty;
 
-       tty = port->port.tty;
+       tty = tty_port_tty_get(&port->port);
 
-       if (!(port->port.flags & ASYNC_INITIALIZED))
+       if (!(port->port.flags & ASYNC_INITIALIZED)) {
+               tty_kref_put(tty);
                return;
+       }
 
        tty_port_free_xmit_buf(&port->port);
        port->port.flags &= ~ASYNC_INITIALIZED;
        /* 3rd October 2000 : Vinayak P Risbud */
-       port->port.tty = NULL;
+       tty_port_tty_set(&port->port, NULL);
 
        /*Fix done by Anil .S on 30-04-2001
        remote login through isi port has dtr toggle problem
@@ -1243,9 +1243,10 @@ static int isicom_tiocmset(struct tty_struct *tty, struct file *file,
        return 0;
 }
 
-static int isicom_set_serial_info(struct isi_port *port,
-       struct serial_struct __user *info)
+static int isicom_set_serial_info(struct tty_struct *tty,
+                                       struct serial_struct __user *info)
 {
+       struct isi_port *port = tty->driver_data;
        struct serial_struct newinfo;
        int reconfig_port;
 
@@ -1276,7 +1277,7 @@ static int isicom_set_serial_info(struct isi_port *port,
        if (reconfig_port) {
                unsigned long flags;
                spin_lock_irqsave(&port->card->card_lock, flags);
-               isicom_config_port(port);
+               isicom_config_port(tty);
                spin_unlock_irqrestore(&port->card->card_lock, flags);
        }
        unlock_kernel();
@@ -1318,7 +1319,7 @@ static int isicom_ioctl(struct tty_struct *tty, struct file *filp,
                return isicom_get_serial_info(port, argp);
 
        case TIOCSSERIAL:
-               return isicom_set_serial_info(port, argp);
+               return isicom_set_serial_info(tty, argp);
 
        default:
                return -ENOIOCTLCMD;
@@ -1341,7 +1342,7 @@ static void isicom_set_termios(struct tty_struct *tty,
                return;
 
        spin_lock_irqsave(&port->card->card_lock, flags);
-       isicom_config_port(port);
+       isicom_config_port(tty);
        spin_unlock_irqrestore(&port->card->card_lock, flags);
 
        if ((old_termios->c_cflag & CRTSCTS) &&
@@ -1419,7 +1420,7 @@ static void isicom_hangup(struct tty_struct *tty)
 
        port->port.count = 0;
        port->port.flags &= ~ASYNC_NORMAL_ACTIVE;
-       port->port.tty = NULL;
+       tty_port_tty_set(&port->port, NULL);
        wake_up_interruptible(&port->port.open_wait);
 }
 
index d3d7864e0c1ef566b86d9a5cfb72c45d2aaf5836..5df4003ad8736f0e544dbc685010f7d8da783be1 100644 (file)
@@ -205,7 +205,7 @@ static int moxa_tiocmset(struct tty_struct *tty, struct file *file,
 static void moxa_poll(unsigned long);
 static void moxa_set_tty_param(struct tty_struct *, struct ktermios *);
 static void moxa_setup_empty_event(struct tty_struct *);
-static void moxa_shut_down(struct moxa_port *);
+static void moxa_shut_down(struct tty_struct *);
 /*
  * moxa board interface functions:
  */
@@ -217,7 +217,7 @@ static void MoxaPortLineCtrl(struct moxa_port *, int, int);
 static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int);
 static int MoxaPortLineStatus(struct moxa_port *);
 static void MoxaPortFlushData(struct moxa_port *, int);
-static int MoxaPortWriteData(struct moxa_port *, const unsigned char *, int);
+static int MoxaPortWriteData(struct tty_struct *, const unsigned char *, int);
 static int MoxaPortReadData(struct moxa_port *);
 static int MoxaPortTxQueue(struct moxa_port *);
 static int MoxaPortRxQueue(struct moxa_port *);
@@ -332,6 +332,7 @@ static int moxa_ioctl(struct tty_struct *tty, struct file *file,
                for (i = 0; i < MAX_BOARDS; i++) {
                        p = moxa_boards[i].ports;
                        for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
+                               struct tty_struct *ttyp;
                                memset(&tmp, 0, sizeof(tmp));
                                if (!moxa_boards[i].ready)
                                        goto copy;
@@ -344,10 +345,12 @@ static int moxa_ioctl(struct tty_struct *tty, struct file *file,
                                if (status & 4)
                                        tmp.dcd = 1;
 
-                               if (!p->port.tty || !p->port.tty->termios)
+                               ttyp = tty_port_tty_get(&p->port);
+                               if (!ttyp || !ttyp->termios)
                                        tmp.cflag = p->cflag;
                                else
-                                       tmp.cflag = p->port.tty->termios->c_cflag;
+                                       tmp.cflag = ttyp->termios->c_cflag;
+                               tty_kref_put(tty);
 copy:
                                if (copy_to_user(argm, &tmp, sizeof(tmp))) {
                                        mutex_unlock(&moxa_openlock);
@@ -880,8 +883,14 @@ static void moxa_board_deinit(struct moxa_board_conf *brd)
 
        /* pci hot-un-plug support */
        for (a = 0; a < brd->numPorts; a++)
-               if (brd->ports[a].port.flags & ASYNC_INITIALIZED)
-                       tty_hangup(brd->ports[a].port.tty);
+               if (brd->ports[a].port.flags & ASYNC_INITIALIZED) {
+                       struct tty_struct *tty = tty_port_tty_get(
+                                               &brd->ports[a].port);
+                       if (tty) {
+                               tty_hangup(tty);
+                               tty_kref_put(tty);
+                       }
+               }
        while (1) {
                opened = 0;
                for (a = 0; a < brd->numPorts; a++)
@@ -1096,13 +1105,14 @@ static void __exit moxa_exit(void)
 module_init(moxa_init);
 module_exit(moxa_exit);
 
-static void moxa_close_port(struct moxa_port *ch)
+static void moxa_close_port(struct tty_struct *tty)
 {
-       moxa_shut_down(ch);
+       struct moxa_port *ch = tty->driver_data;
+       moxa_shut_down(tty);
        MoxaPortFlushData(ch, 2);
        ch->port.flags &= ~ASYNC_NORMAL_ACTIVE;
-       ch->port.tty->driver_data = NULL;
-       ch->port.tty = NULL;
+       tty->driver_data = NULL;
+       tty_port_tty_set(&ch->port, NULL);
 }
 
 static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp,
@@ -1161,7 +1171,7 @@ static int moxa_open(struct tty_struct *tty, struct file *filp)
        ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
        ch->port.count++;
        tty->driver_data = ch;
-       ch->port.tty = tty;
+       tty_port_tty_set(&ch->port, tty);
        if (!(ch->port.flags & ASYNC_INITIALIZED)) {
                ch->statusflags = 0;
                moxa_set_tty_param(tty, tty->termios);
@@ -1179,7 +1189,7 @@ static int moxa_open(struct tty_struct *tty, struct file *filp)
        if (retval) {
                if (ch->port.count) /* 0 means already hung up... */
                        if (--ch->port.count == 0)
-                               moxa_close_port(ch);
+                               moxa_close_port(tty);
        } else
                ch->port.flags |= ASYNC_NORMAL_ACTIVE;
        mutex_unlock(&moxa_openlock);
@@ -1219,7 +1229,7 @@ static void moxa_close(struct tty_struct *tty, struct file *filp)
                tty_wait_until_sent(tty, 30 * HZ);      /* 30 seconds timeout */
        }
 
-       moxa_close_port(ch);
+       moxa_close_port(tty);
 unlock:
        mutex_unlock(&moxa_openlock);
 }
@@ -1234,7 +1244,7 @@ static int moxa_write(struct tty_struct *tty,
                return 0;
 
        spin_lock_bh(&moxa_lock);
-       len = MoxaPortWriteData(ch, buf, count);
+       len = MoxaPortWriteData(tty, buf, count);
        spin_unlock_bh(&moxa_lock);
 
        ch->statusflags |= LOWWAIT;
@@ -1409,7 +1419,7 @@ static void moxa_hangup(struct tty_struct *tty)
                return;
        }
        ch->port.count = 0;
-       moxa_close_port(ch);
+       moxa_close_port(tty);
        mutex_unlock(&moxa_openlock);
 
        wake_up_interruptible(&ch->port.open_wait);
@@ -1417,11 +1427,14 @@ static void moxa_hangup(struct tty_struct *tty)
 
 static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
 {
+       struct tty_struct *tty;
        dcd = !!dcd;
 
-       if (dcd != p->DCDState && p->port.tty && C_CLOCAL(p->port.tty)) {
-               if (!dcd)
-                       tty_hangup(p->port.tty);
+       if (dcd != p->DCDState) {
+               tty = tty_port_tty_get(&p->port);
+               if (tty && C_CLOCAL(tty) && !dcd)
+                       tty_hangup(tty);
+               tty_kref_put(tty);
        }
        p->DCDState = dcd;
 }
@@ -1429,7 +1442,7 @@ static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
 static int moxa_poll_port(struct moxa_port *p, unsigned int handle,
                u16 __iomem *ip)
 {
-       struct tty_struct *tty = p->port.tty;
+       struct tty_struct *tty = tty_port_tty_get(&p->port);
        void __iomem *ofsAddr;
        unsigned int inited = p->port.flags & ASYNC_INITIALIZED;
        u16 intr;
@@ -1476,6 +1489,7 @@ static int moxa_poll_port(struct moxa_port *p, unsigned int handle,
                tty_insert_flip_char(tty, 0, TTY_BREAK);
                tty_schedule_flip(tty);
        }
+       tty_kref_put(tty);
 
        if (intr & IntrLine)
                moxa_new_dcdstate(p, readb(ofsAddr + FlagStat) & DCD_state);
@@ -1560,9 +1574,9 @@ static void moxa_setup_empty_event(struct tty_struct *tty)
        spin_unlock_bh(&moxa_lock);
 }
 
-static void moxa_shut_down(struct moxa_port *ch)
+static void moxa_shut_down(struct tty_struct *tty)
 {
-       struct tty_struct *tp = ch->port.tty;
+       struct moxa_port *ch = tty->driver_data;
 
        if (!(ch->port.flags & ASYNC_INITIALIZED))
                return;
@@ -1572,7 +1586,7 @@ static void moxa_shut_down(struct moxa_port *ch)
        /*
         * If we're a modem control device and HUPCL is on, drop RTS & DTR.
         */
-       if (C_HUPCL(tp))
+       if (C_HUPCL(tty))
                MoxaPortLineCtrl(ch, 0, 0);
 
        spin_lock_bh(&moxa_lock);
@@ -1953,9 +1967,10 @@ static int MoxaPortLineStatus(struct moxa_port *port)
        return val;
 }
 
-static int MoxaPortWriteData(struct moxa_port *port,
+static int MoxaPortWriteData(struct tty_struct *tty,
                const unsigned char *buffer, int len)
 {
+       struct moxa_port *port = tty->driver_data;
        void __iomem *baseAddr, *ofsAddr, *ofs;
        unsigned int c, total;
        u16 head, tail, tx_mask, spage, epage;