+++ /dev/null
-#ifndef __WINBOND_BSSDSCPT_H
-#define __WINBOND_BSSDSCPT_H
-
-#include <linux/types.h>
-
-#include "mds_s.h"
-#include "mlme_s.h"
-
-//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-// bssdscpt.c
-// BSS descriptor data base
-// history :
-//
-// Description:
-// BSS descriptor data base will store the information of the stations at the
-// surrounding environment. The first entry( psBSS(0) ) will not be used and the
-// second one( psBSS(1) ) will be used for the broadcast address.
-//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-
-//#define MAX_ACC_RSSI_COUNT 10
-#define MAX_ACC_RSSI_COUNT 6
-
-///////////////////////////////////////////////////////////////////////////
-//
-// BSS Description set Element , to store scan received Beacon information
-//
-// Our's differs slightly from the specs. The specify a PHY_Parameter_Set.
-// Since we're only doing a DS design right now, we just have a DS structure.
-//////////////////////////////////////////////////////////////////////////////
-typedef struct BSSDescriptionElement
-{
- u32 SlotValid;
- u32 PowerSaveMode;
- RXLAYER1 RxLayer1;
-
- u8 abPeerAddress[ MAC_ADDR_LENGTH + 2 ]; // peer MAC Address associated with this session. 6-OCTET value
- u32 dwBgScanStamp; // BgScan Sequence Counter stamp, record psROAM->dwScanCounter.
-
- u16 Beacon_Period;
- u16 wATIM_Window;
-
- u8 abBssID[ MAC_ADDR_LENGTH + 2 ]; // 6B
-
- u8 bBssType;
- u8 DTIM_Period; // 1 octet usually from TIM element, if present
- u8 boInTimerHandler;
- u8 boERP; // analysis ERP or (extended) supported rate element
-
- u8 Timestamp[8];
- u8 BasicRate[32];
- u8 OperationalRate[32];
- u32 dwBasicRateBitmap; //bit map, retrieve from SupportedRateSet
- u32 dwOperationalRateBitmap; //bit map, retrieve from SupportedRateSet and
- // ExtendedSupportedRateSet
- // For RSSI calculating
- u32 HalRssi[MAX_ACC_RSSI_COUNT]; // Encode. It must use MACRO of HAL to get the LNA and AGC data
- u32 HalRssiIndex;
-
- ////From beacon/probe response
- struct SSID_Element SSID; // 34B
- u8 reserved_1[ 2 ];
-
- struct Capability_Information_Element CapabilityInformation; // 2B
- u8 reserved_2[ 2 ];
-
- struct CF_Parameter_Set_Element CF_Parameter_Set; // 8B
- struct IBSS_Parameter_Set_Element IBSS_Parameter_Set; // 4B
- struct TIM_Element TIM_Element_Set; // 256B
-
- struct DS_Parameter_Set_Element DS_Parameter_Set; // 3B
- u8 reserved_3;
-
- struct ERP_Information_Element ERP_Information_Set; // 3B
- u8 reserved_4;
-
- struct Supported_Rates_Element SupportedRateSet; // 10B
- u8 reserved_5[2];
-
- struct Extended_Supported_Rates_Element ExtendedSupportedRateSet; // 257B
- u8 reserved_6[3];
-
- u8 band;
- u8 reserved_7[3];
-
- // for MLME module
- u16 wState; // the current state of the system
- u16 wIndex; // THIS BSS element entry index
-
- void* psadapter; // pointer to THIS adapter
- struct timer_list timer; // MLME timer
-
- // Authentication
- u16 wAuthAlgo; // peer MAC MLME use Auth algorithm, default OPEN_AUTH
- u16 wAuthSeqNum; // current local MAC sendout AuthReq sequence number
-
- u8 auth_challengeText[128];
-
- ////For XP:
- u32 ies_len; // information element length
- u8 ies[256]; // information element
-
- ////For WPA
- u8 RsnIe_Type[2]; //added by ws for distinguish WPA and WPA2 05/14/04
- u8 RsnIe_len;
- u8 Rsn_Num;
-
- // to record the rsn cipher suites,addded by ws 09/05/04
- SUITE_SELECTOR group_cipher; // 4B
- SUITE_SELECTOR pairwise_key_cipher_suites[WLAN_MAX_PAIRWISE_CIPHER_SUITE_COUNT];
- SUITE_SELECTOR auth_key_mgt_suites[WLAN_MAX_AUTH_KEY_MGT_SUITE_LIST_COUNT];
-
- u16 pairwise_key_cipher_suite_count;
- u16 auth_key_mgt_suite_count;
-
- u8 pairwise_key_cipher_suite_selected;
- u8 auth_key_mgt_suite_selected;
- u8 reserved_8[2];
-
- struct RSN_Capability_Element rsn_capabilities; // 2B
- u8 reserved_9[2];
-
- //to record the rsn cipher suites for WPA2
- #ifdef _WPA2_
- u32 pre_auth; //added by WS for distinguish for 05/04/04
- SUITE_SELECTOR wpa2_group_cipher; // 4B
- SUITE_SELECTOR wpa2_pairwise_key_cipher_suites[WLAN_MAX_PAIRWISE_CIPHER_SUITE_COUNT];
- SUITE_SELECTOR wpa2_auth_key_mgt_suites[WLAN_MAX_AUTH_KEY_MGT_SUITE_LIST_COUNT];
-
- u16 wpa2_pairwise_key_cipher_suite_count;
- u16 wpa2_auth_key_mgt_suite_count;
-
- u8 wpa2_pairwise_key_cipher_suite_selected;
- u8 wpa2_auth_key_mgt_suite_selected;
- u8 reserved_10[2];
-
- struct RSN_Capability_Element wpa2_rsn_capabilities; // 2B
- u8 reserved_11[2];
- #endif //endif _WPA2_
-
- //For Replay protection
-// u8 PairwiseTSC[6];
-// u8 GroupTSC[6];
-
- ////For up-to-date
- u32 ScanTimeStamp; //for the decision whether the station/AP(may exist at
- //different channels) has left. It must be detected by
- //scanning. Local device may connected or disconnected.
- u32 BssTimeStamp; //Only for the decision whether the station/AP(exist in
- //the same channel, and no scanning) if local device has
- //connected successfully.
-
- // 20061108 Add for storing WPS_IE. [E id][Length][OUI][Data]
- u8 WPS_IE_Data[MAX_IE_APPEND_SIZE];
- u16 WPS_IE_length;
- u16 WPS_IE_length_tmp; // For verify there is an WPS_IE in Beacon or probe response
-
-} WB_BSSDESCRIPTION, *PWB_BSSDESCRIPTION;
-
-#define wBSSConnectedSTA(adapter) \
- ((u16)(adapter)->sLocalPara.wConnectedSTAindex)
-
-#define psBSS(i) (&(adapter->asBSSDescriptElement[(i)]))
-
-#endif
#define AUTH_REQUEST_PAIRWISE_ERROR 0 // _F flag setting
#define AUTH_REQUEST_GROUP_ERROR 1 // _F flag setting
-// For variable setting
-#define CURRENT_BSS_TYPE psBSS(psLOCAL->wConnectedSTAindex)->bBssType
-#define CURRENT_WEP_MODE psSME->_dot11PrivacyInvoked
-#define CURRENT_BSSID psBSS(psLOCAL->wConnectedSTAindex)->abBssID
-#define CURRENT_DESIRED_WPA_ENABLE ((psSME->bDesiredAuthMode==WPA_AUTH)||(psSME->bDesiredAuthMode==WPAPSK_AUTH))
-#ifdef _WPA2_
-#define CURRENT_DESIRED_WPA2_ENABLE ((psSME->bDesiredAuthMode==WPA2_AUTH)||(psSME->bDesiredAuthMode==WPA2PSK_AUTH))
-#endif //end def _WPA2_
-#define CURRENT_PAIRWISE_KEY_OK psSME->pairwise_key_ok
-//[20040712 WS]
-#define CURRENT_GROUP_KEY_OK psSME->group_key_ok
-#define CURRENT_PAIRWISE_KEY psSME->tx_mic_key
-#define CURRENT_GROUP_KEY psSME->group_tx_mic_key
-#define CURRENT_ENCRYPT_STATUS psSME->encrypt_status
-#define CURRENT_WEP_ID adapter->sSmePara._dot11WEPDefaultKeyID
-#define CURRENT_CONTROL_PORT_BLOCK ( psSME->wpa_ok!=1 || (adapter->Mds.boCounterMeasureBlock==1 && (CURRENT_ENCRYPT_STATUS==ENCRYPT_TKIP)) )
#define CURRENT_FRAGMENT_THRESHOLD (adapter->Mds.TxFragmentThreshold & ~0x1)
#define CURRENT_PREAMBLE_MODE psLOCAL->boShortPreamble?WLAN_PREAMBLE_TYPE_SHORT:WLAN_PREAMBLE_TYPE_LONG
-#define CURRENT_TX_RATE adapter->sLocalPara.CurrentTxRate
-#define CURRENT_FALL_BACK_TX_RATE adapter->sLocalPara.CurrentTxFallbackRate
#define CURRENT_TX_RATE_FOR_MNG adapter->sLocalPara.CurrentTxRateForMng
#define CURRENT_PROTECT_MECHANISM psLOCAL->boProtectMechanism
#define CURRENT_RTS_THRESHOLD adapter->Mds.TxRTSThreshold
projects / linux-2.6-omap-h63xx.git / commitdiff