int cpu;
/* Increment the counters */
- on_each_cpu(test_each, NULL, 0, 1);
+ on_each_cpu(test_each, NULL, 1);
/* Read all the counters */
printk("Counters read from CPU %d\n", smp_processor_id());
for_each_online_cpu(cpu) {
L: sdhci-devel@list.drzeus.cx
S: Maintained
+SECURITY SUBSYSTEM
+F: security/
+P: James Morris
+M: jmorris@namei.org
+L: linux-kernel@vger.kernel.org
+L: linux-security-module@vger.kernel.org (suggested Cc:)
+T: git kernel.org:pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
+S: Supported
+
SECURITY CONTACT
P: Security Officers
M: security@kernel.org
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Mon Jun 11 00:23:51 2007
+# Linux kernel version: 2.6.28-rc6
+# Fri Nov 28 17:53:48 2008
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_LEMOTE_FULONG=y
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+CONFIG_LEMOTE_FULONG=y
# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
+# CONFIG_MACH_EMMA is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
CONFIG_I8259=y
# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_HAVE_STD_PC_SERIAL_PORT=y
#
# CPU selection
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_WB=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_SYS_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION="lm32"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_ISA=y
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
-# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Power management options
#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
CONFIG_NET=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=m
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_PHONET=m
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
# CONFIG_IEEE80211_CRYPT_CCMP is not set
# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
# CONFIG_RFKILL is not set
+CONFIG_NET_9P=m
+# CONFIG_NET_9P_DEBUG is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
CONFIG_MTD_PHYSMAP_START=0x1fc00000
CONFIG_MTD_PHYSMAP_LEN=0x80000
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
# CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_BLINK is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
#
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+CONFIG_VETH=m
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_TC35815 is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
#
-# I2C Algorithms
+# I2C Hardware Bus support
#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
#
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMIZE=y
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_VIDEO_SH_MOBILE_CEU=m
CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_W9968CF is not set
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
# CONFIG_USB_ZR364XX is not set
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
# CONFIG_USB_DSBR is not set
-# CONFIG_DVB_CORE is not set
+CONFIG_USB_SI470X=m
+CONFIG_USB_MR800=m
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_SMIVGX is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_RTCTIMER=m
-CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA MIPS devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_MIPS=y
+CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# CONFIG_USB_MOUSE is not set
#
-# USB support
-#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
+CONFIG_USB_C67X00_HCD=m
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_ISP1760_HCD=m
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+CONFIG_USB_STORAGE_ONETOUCH=y
# CONFIG_USB_STORAGE_KARMA is not set
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_LIBUSUAL=y
#
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_VST=m
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# RTC interfaces
#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
#
-# Real Time Clock
+# I2C RTC drivers
#
-# CONFIG_RTC_CLASS is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
-# DMA Engine support
+# SPI RTC drivers
#
-# CONFIG_DMA_ENGINE is not set
#
-# DMA Clients
+# Platform RTC drivers
#
+CONFIG_RTC_DRV_CMOS=m
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# DMA Devices
+# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FS_XIP=y
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=2048
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+CONFIG_DYNAMIC_PRINTK_DEBUG=y
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+CONFIG_CRYPTO=y
#
-# Cryptographic options
+# Crypto core or helper
#
-CONFIG_CRYPTO=y
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_LZO=m
#
-# Hardware crypto devices
+# Random Number Generation
#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
+CONFIG_CRC7=m
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Tue Aug 7 12:39:49 2007
+# Linux kernel version: 2.6.28-rc6
+# Fri Nov 28 15:41:33 2008
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
CONFIG_SGI_IP22=y
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
# CONFIG_WR_PPMC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_ARC=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_I8259=y
# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
+CONFIG_SGI_HAS_INDYDOG=y
+CONFIG_SGI_HAS_HAL2=y
+CONFIG_SGI_HAS_SEEQ=y
+CONFIG_SGI_HAS_WD93=y
+CONFIG_SGI_HAS_ZILOG=y
+CONFIG_SGI_HAS_I8042=y
+CONFIG_DEFAULT_SGI_PARTITION=y
CONFIG_ARC32=y
CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_L1_CACHE_SHIFT=7
CONFIG_ARC_CONSOLE=y
CONFIG_ARC_PROMLIB=y
# CONFIG_CPU_TX49XX is not set
CONFIG_CPU_R5000=y
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_EISA is not set
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_I8253=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_TRAD_SIGNALS=y
#
# Power management options
#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT=y
CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
#
# Queueing/Scheduling
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_ACT_SKBEDIT=m
# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
+CONFIG_PHONET=m
CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-CONFIG_CFG80211=m
+# CONFIG_WIRELESS is not set
CONFIG_WIRELESS_EXT=y
-CONFIG_MAC80211=m
-# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
# CONFIG_NET_9P is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_SGIWD93_SCSI=y
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
+CONFIG_VETH=m
CONFIG_PHYLIB=m
#
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_REALTEK_PHY=m
+CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=m
# CONFIG_AX88796 is not set
+CONFIG_SMC91X=m
# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
CONFIG_SGISEEQ=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_STRIP=m
CONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not set
+# CONFIG_IWLWIFI_LEDS is not set
CONFIG_HOSTAP=m
# CONFIG_HOSTAP_FIRMWARE is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_PS2_LIFEBOOK is not set
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=m
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_INDYDOG=m
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_SSB_POSSIBLE=y
#
-# SPI support
+# Sonics Silicon Backplane
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
#
# Console display driver support
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_SGI_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+CONFIG_HID_PID=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_CMOS is not set
+CONFIG_RTC_DRV_DS1286=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Userspace I/O
+# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
CONFIG_EFS_FS=m
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_UPCALL=y
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+CONFIG_DYNAMIC_PRINTK_DEBUG=y
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_HW is not set
#
CONFIG_BITREVERSE=m
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=m
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Tue Aug 7 12:59:29 2007
+# Linux kernel version: 2.6.28-rc6
+# Mon Dec 1 08:08:19 2008
#
CONFIG_MIPS=y
CONFIG_ZONE_DMA=y
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
CONFIG_MIPS_MALTA=y
# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
# CONFIG_WR_PPMC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_BOOT_RAW=y
CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_HOTPLUG_CPU is not set
CONFIG_I8259=y
CONFIG_MIPS_BONITO64=y
CONFIG_MIPS_MSC=y
# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
+CONFIG_IRQ_GIC=y
+CONFIG_MIPS_BOARDS_GEN=y
CONFIG_PCI_GT64XXX_PCI0=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_BOOT_ELF32=y
#
# CPU selection
#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_CPU_LOONGSON2 is not set
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
#
# Kernel type
CONFIG_MIPS_MT_SMP=y
# CONFIG_MIPS_MT_SMTC is not set
CONFIG_MIPS_MT=y
+# CONFIG_SCHED_SMT is not set
+CONFIG_SYS_SUPPORTS_SCHED_SMT=y
CONFIG_SYS_SUPPORTS_MULTITHREADING=y
CONFIG_MIPS_MT_FPAFF=y
# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_CPU_HAS_SMARTMIPS is not set
CONFIG_CPU_MIPSR2_IRQ_VI=y
CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_SRS=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_SYS_SUPPORTS_SMARTMIPS=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_SMP=y
+CONFIG_SMP_UP=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_NR_CPUS_DEFAULT_2=y
CONFIG_NR_CPUS=2
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
# CONFIG_KEXEC is not set
CONFIG_SECCOMP=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_CPUSETS is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+# CONFIG_USER_NS is not set
+CONFIG_PID_NS=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_MMU=y
CONFIG_I8253=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
# Power management options
#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+CONFIG_STP=m
+CONFIG_GARP=m
CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
#
# Queueing/Scheduling
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
+CONFIG_PHONET=m
CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_MAC80211=m
-# CONFIG_MAC80211_DEBUG is not set
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
+CONFIG_RFKILL_LEDS=y
# CONFIG_NET_9P is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+CONFIG_MTD_OOPS=m
#
# RAM/ROM/Flash chip drivers
CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_TC86C001=m
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
+# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_FUSION is not set
#
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-CONFIG_NETDEVICES_MULTIQUEUE=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
+CONFIG_VETH=m
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
-# CONFIG_FIXED_PHY is not set
+CONFIG_REALTEK_PHY=m
+CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_AX88796=m
+# CONFIG_AX88796_93CX6 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_TC35815=m
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=m
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBERTAS=m
# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PRISM54=m
+# CONFIG_RTL8180 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWLAGN is not set
+# CONFIG_IWL3945 is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
-CONFIG_BCM43XX=m
-CONFIG_BCM43XX_DEBUG=y
-CONFIG_BCM43XX_DMA=y
-CONFIG_BCM43XX_PIO=y
-CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
-# CONFIG_BCM43XX_DMA_MODE is not set
-# CONFIG_BCM43XX_PIO_MODE is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_RT2X00 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
-CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Userspace I/O
+# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
LEAF(sys_syscall)
subu t0, a0, __NR_O32_Linux # check syscall number
sltiu v0, t0, __NR_O32_Linux_syscalls + 1
+ beqz t0, einval # do not recurse
sll t1, t0, 3
beqz v0, einval
-
lw t2, sys_call_table(t1) # syscall routine
- li v1, 4000 - __NR_O32_Linux # index of sys_syscall
- beq t0, v1, einval # do not recurse
-
/* Some syscalls like execve get their arguments from struct pt_regs
and claim zero arguments in the syscall table. Thus we have to
assume the worst case and shuffle around all potential arguments.
sys sys_pselect6 6
sys sys_ppoll 5
sys sys_unshare 1
- sys sys_splice 4
+ sys sys_splice 6
sys sys_sync_file_range 7 /* 4305 */
sys sys_tee 4
sys sys_vmsplice 4
PTR sys_splice
PTR sys_sync_file_range
PTR sys_tee
- PTR sys_vmsplice /* 6270 */
+ PTR compat_sys_vmsplice /* 6270 */
PTR sys_move_pages
PTR compat_sys_set_robust_list
PTR compat_sys_get_robust_list
END(handle_sys)
LEAF(sys32_syscall)
- sltu v0, a0, __NR_O32_Linux + __NR_O32_Linux_syscalls + 1
+ subu t0, a0, __NR_O32_Linux # check syscall number
+ sltiu v0, t0, __NR_O32_Linux_syscalls + 1
+ beqz t0, einval # do not recurse
+ dsll t1, t0, 3
beqz v0, einval
-
- dsll v0, a0, 3
- ld t2, (sys_call_table - (__NR_O32_Linux * 8))(v0)
-
- li v1, 4000 # indirect syscall number
- beq a0, v1, einval # do not recurse
+ ld t2, sys_call_table(t1) # syscall routine
move a0, a1 # shift argument registers
move a1, a2
jr t2
/* Unreached */
-einval: li v0, -EINVAL
+einval: li v0, -ENOSYS
jr ra
END(sys32_syscall)
PTR sys_splice
PTR sys32_sync_file_range /* 4305 */
PTR sys_tee
- PTR sys_vmsplice
+ PTR compat_sys_vmsplice
PTR compat_sys_move_pages
PTR compat_sys_set_robust_list
PTR compat_sys_get_robust_list /* 4310 */
/* It's good to be able to run the SP and if it chokes have a look at
the /dev/rt?. But if we reset the pointer to the shared struct we
- loose what has happened. So perhaps if garbage is sent to the vpe
+ lose what has happened. So perhaps if garbage is sent to the vpe
device, use it as a trigger for the reset. Hopefully a nice
executable will be along shortly. */
if (ret < 0)
#
obj-y := malta-amon.o malta-cmdline.o \
malta-display.o malta-init.o malta-int.o \
- malta-memory.o malta-mtd.o \
- malta-platform.o malta-reset.o \
- malta-setup.o malta-time.o
+ malta-memory.o malta-platform.o \
+ malta-reset.o malta-setup.o malta-time.o
obj-$(CONFIG_EARLY_PRINTK) += malta-console.o
obj-$(CONFIG_PCI) += malta-pci.o
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006 MIPS Technologies, Inc.
- * written by Ralf Baechle <ralf@linux-mips.org>
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <mtd/mtd-abi.h>
-
-static struct mtd_partition malta_mtd_partitions[] = {
- {
- .name = "YAMON",
- .offset = 0x0,
- .size = 0x100000,
- .mask_flags = MTD_WRITEABLE
- }, {
- .name = "User FS",
- .offset = 0x100000,
- .size = 0x2e0000
- }, {
- .name = "Board Config",
- .offset = 0x3e0000,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE
- }
-};
-
-static struct physmap_flash_data malta_flash_data = {
- .width = 4,
- .nr_parts = ARRAY_SIZE(malta_mtd_partitions),
- .parts = malta_mtd_partitions
-};
-
-static struct resource malta_flash_resource = {
- .start = 0x1e000000,
- .end = 0x1e3fffff,
- .flags = IORESOURCE_MEM
-};
-
-static struct platform_device malta_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &malta_flash_data,
- },
- .num_resources = 1,
- .resource = &malta_flash_resource,
-};
-
-static int __init malta_mtd_init(void)
-{
- platform_device_register(&malta_flash);
-
- return 0;
-}
-
-module_init(malta_mtd_init)
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2007 MIPS Technologies, Inc.
+ * Copyright (C) 2006, 07 MIPS Technologies, Inc.
* written by Ralf Baechle (ralf@linux-mips.org)
+ * written by Ralf Baechle <ralf@linux-mips.org>
*
- * Probe driver for the Malta's UART ports:
+ * Copyright (C) 2008 Wind River Systems, Inc.
+ * updated by Tiejun Chen <tiejun.chen@windriver.com>
+ *
+ * 1. Probe driver for the Malta's UART ports:
*
* o 2 ports in the SMC SuperIO
* o 1 port in the CBUS UART, a discrete 16550 which normally is only used
*
* We don't use 8250_platform.c on Malta as it would result in the CBUS
* UART becoming ttyS0.
+ *
+ * 2. Register RTC-CMOS platform device on Malta.
*/
-#include <linux/module.h>
#include <linux/init.h>
#include <linux/serial_8250.h>
+#include <linux/mc146818rtc.h>
+#include <linux/module.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <mtd/mtd-abi.h>
#define SMC_PORT(base, int) \
{ \
{ },
};
-static struct platform_device uart8250_device = {
+static struct platform_device malta_uart8250_device = {
.name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM2,
+ .id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = uart8250_data,
},
};
-static int __init uart8250_init(void)
+struct resource malta_rtc_resources[] = {
+ {
+ .start = RTC_PORT(0),
+ .end = RTC_PORT(7),
+ .flags = IORESOURCE_IO,
+ }, {
+ .start = RTC_IRQ,
+ .end = RTC_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device malta_rtc_device = {
+ .name = "rtc_cmos",
+ .id = -1,
+ .resource = malta_rtc_resources,
+ .num_resources = ARRAY_SIZE(malta_rtc_resources),
+};
+
+static struct mtd_partition malta_mtd_partitions[] = {
+ {
+ .name = "YAMON",
+ .offset = 0x0,
+ .size = 0x100000,
+ .mask_flags = MTD_WRITEABLE
+ }, {
+ .name = "User FS",
+ .offset = 0x100000,
+ .size = 0x2e0000
+ }, {
+ .name = "Board Config",
+ .offset = 0x3e0000,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE
+ }
+};
+
+static struct physmap_flash_data malta_flash_data = {
+ .width = 4,
+ .nr_parts = ARRAY_SIZE(malta_mtd_partitions),
+ .parts = malta_mtd_partitions
+};
+
+static struct resource malta_flash_resource = {
+ .start = 0x1e000000,
+ .end = 0x1e3fffff,
+ .flags = IORESOURCE_MEM
+};
+
+static struct platform_device malta_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &malta_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &malta_flash_resource,
+};
+
+static struct platform_device *malta_devices[] __initdata = {
+ &malta_uart8250_device,
+ &malta_rtc_device,
+ &malta_flash_device,
+};
+
+static int __init malta_add_devices(void)
{
- return platform_device_register(&uart8250_device);
-}
+ int err;
-module_init(uart8250_init);
+ err = platform_add_devices(malta_devices, ARRAY_SIZE(malta_devices));
+ if (err)
+ return err;
+
+ /*
+ * Set RTC to BCD mode to support current alarm code.
+ */
+ CMOS_WRITE(CMOS_READ(RTC_CONTROL) & ~RTC_DM_BINARY, RTC_CONTROL);
+
+ return 0;
+}
-MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("8250 UART probe driver for the Malta CBUS UART");
+device_initcall(malta_add_devices);
try_again:
/* pull chars out of the buffer */
ix = gdbstub_rx_outp;
+ barrier();
if (ix == gdbstub_rx_inp) {
if (nonblock)
return -EAGAIN;
ch = gdbstub_rx_buffer[ix++];
st = gdbstub_rx_buffer[ix++];
+ barrier();
gdbstub_rx_outp = ix & 0x00000fff;
if (st & UART_LSR_BI) {
#include <asm-generic/bitops/sched.h>
#include <asm-generic/bitops/ffs.h>
#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
#include <asm-generic/bitops/fls64.h>
#include <asm-generic/bitops/hweight.h>
#include <asm-generic/bitops/lock.h>
break;
case PTRACE_SETFPREGS64:
- ret = copy_regset_to_user(child, view, REGSET_FP,
+ ret = copy_regset_from_user(child, view, REGSET_FP,
0 * sizeof(u64),
33 * sizeof(u64),
fps);
#define VIS_OPF_SHIFT 5
#define VIS_OPF_MASK (0x1ff << VIS_OPF_SHIFT)
-#define RS1(INSN) (((INSN) >> 24) & 0x1f)
+#define RS1(INSN) (((INSN) >> 14) & 0x1f)
#define RS2(INSN) (((INSN) >> 0) & 0x1f)
#define RD(INSN) (((INSN) >> 25) & 0x1f)
unsigned long i;
rs1 = fpd_regval(f, RS1(insn));
- rs2 = fpd_regval(f, RS1(insn));
+ rs2 = fpd_regval(f, RS2(insn));
rd = fpd_regaddr(f, RD(insn));
rd_val = *rd;
if (get_user(insn, (u32 __user *) pc))
return -EFAULT;
+ save_and_clear_fpu();
+
opf = (insn & VIS_OPF_MASK) >> VIS_OPF_SHIFT;
switch (opf) {
default:
/* Pointer to PCI device of this IOMMU */
struct pci_dev *dev;
- /*
- * Capability pointer. There could be more than one IOMMU per PCI
- * device function if there are more than one AMD IOMMU capability
- * pointers.
- */
- u16 cap_ptr;
-
/* physical address of MMIO space */
u64 mmio_phys;
/* virtual address of MMIO space */
/* capabilities of that IOMMU read from ACPI */
u32 cap;
+ /*
+ * Capability pointer. There could be more than one IOMMU per PCI
+ * device function if there are more than one AMD IOMMU capability
+ * pointers.
+ */
+ u16 cap_ptr;
+
/* pci domain of this IOMMU */
u16 pci_seg;
/* size of command buffer */
u32 cmd_buf_size;
- /* event buffer virtual address */
- u8 *evt_buf;
/* size of event buffer */
u32 evt_buf_size;
+ /* event buffer virtual address */
+ u8 *evt_buf;
/* MSI number for event interrupt */
u16 evt_msi_num;
- /* if one, we need to send a completion wait command */
- int need_sync;
-
/* true if interrupts for this IOMMU are already enabled */
bool int_enabled;
+ /* if one, we need to send a completion wait command */
+ int need_sync;
+
/* default dma_ops domain for that IOMMU */
struct dma_ops_domain *default_dom;
};
/* Make sure we keep the same behaviour */
static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
-#ifdef CONFIG_X86_32
- return 0;
-#else
+#ifdef CONFIG_X86_64
struct dma_mapping_ops *ops = get_dma_ops(dev);
if (ops->mapping_error)
return ops->mapping_error(dev, dma_addr);
- return (dma_addr == bad_dma_address);
#endif
+ return (dma_addr == bad_dma_address);
}
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
void set_pci_bus_resources_arch_default(struct pci_bus *b);
#ifdef CONFIG_SMP
-#define mc_capable() (boot_cpu_data.x86_max_cores > 1)
+#define mc_capable() (cpus_weight(per_cpu(cpu_core_map, 0)) != nr_cpu_ids)
#define smt_capable() (smp_num_siblings > 1)
#endif
spin_lock_irqsave(&iommu->lock, flags);
ret = __iommu_queue_command(iommu, cmd);
+ if (!ret)
+ iommu->need_sync = 1;
spin_unlock_irqrestore(&iommu->lock, flags);
return ret;
cmd.data[0] = CMD_COMPL_WAIT_INT_MASK;
CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT);
- iommu->need_sync = 0;
-
spin_lock_irqsave(&iommu->lock, flags);
+ if (!iommu->need_sync)
+ goto out;
+
+ iommu->need_sync = 0;
+
ret = __iommu_queue_command(iommu, &cmd);
if (ret)
ret = iommu_queue_command(iommu, &cmd);
- iommu->need_sync = 1;
-
return ret;
}
ret = iommu_queue_command(iommu, &cmd);
- iommu->need_sync = 1;
-
return ret;
}
u64 __pte, *pte, *page;
bus_addr = PAGE_ALIGN(bus_addr);
- phys_addr = PAGE_ALIGN(bus_addr);
+ phys_addr = PAGE_ALIGN(phys_addr);
/* only support 512GB address spaces for now */
if (bus_addr > IOMMU_MAP_SIZE_L3 || !(prot & IOMMU_PROT_MASK))
continue;
p2 = IOMMU_PTE_PAGE(p1[i]);
- for (j = 0; j < 512; ++i) {
+ for (j = 0; j < 512; ++j) {
if (!IOMMU_PTE_PRESENT(p2[j]))
continue;
p3 = IOMMU_PTE_PAGE(p2[j]);
write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
iommu_queue_inv_dev_entry(iommu, devid);
-
- iommu->need_sync = 1;
}
/*****************************************************************************
print_devid(_bdf, 1);
}
+ if (domain_for_device(_bdf) == NULL)
+ set_device_domain(*iommu, *domain, _bdf);
+
return 1;
}
if (address >= dom->aperture_size)
return;
- WARN_ON(address & 0xfffULL || address > dom->aperture_size);
+ WARN_ON(address & ~PAGE_MASK || address >= dom->aperture_size);
pte = dom->pte_pages[IOMMU_PTE_L1_INDEX(address)];
pte += IOMMU_PTE_L0_INDEX(address);
/*
* This function contains common code for mapping of a physically
- * contiguous memory region into DMA address space. It is uses by all
- * mapping functions provided by this IOMMU driver.
+ * contiguous memory region into DMA address space. It is used by all
+ * mapping functions provided with this IOMMU driver.
* Must be called with the domain lock held.
*/
static dma_addr_t __map_single(struct device *dev,
dma_addr_t i, start;
unsigned int pages;
- if ((dma_addr == 0) || (dma_addr + size > dma_dom->aperture_size))
+ if ((dma_addr == bad_dma_address) ||
+ (dma_addr + size > dma_dom->aperture_size))
return;
pages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
if (addr == bad_dma_address)
goto out;
- if (unlikely(iommu->need_sync))
- iommu_completion_wait(iommu);
+ iommu_completion_wait(iommu);
out:
spin_unlock_irqrestore(&domain->lock, flags);
__unmap_single(iommu, domain->priv, dma_addr, size, dir);
- if (unlikely(iommu->need_sync))
- iommu_completion_wait(iommu);
+ iommu_completion_wait(iommu);
spin_unlock_irqrestore(&domain->lock, flags);
}
goto unmap;
}
- if (unlikely(iommu->need_sync))
- iommu_completion_wait(iommu);
+ iommu_completion_wait(iommu);
out:
spin_unlock_irqrestore(&domain->lock, flags);
s->dma_address = s->dma_length = 0;
}
- if (unlikely(iommu->need_sync))
- iommu_completion_wait(iommu);
+ iommu_completion_wait(iommu);
spin_unlock_irqrestore(&domain->lock, flags);
}
goto out;
}
- if (unlikely(iommu->need_sync))
- iommu_completion_wait(iommu);
+ iommu_completion_wait(iommu);
out:
spin_unlock_irqrestore(&domain->lock, flags);
__unmap_single(iommu, domain->priv, dma_addr, size, DMA_BIDIRECTIONAL);
- if (unlikely(iommu->need_sync))
- iommu_completion_wait(iommu);
+ iommu_completion_wait(iommu);
spin_unlock_irqrestore(&domain->lock, flags);
printk(KERN_INFO "Using ACPI for processor (LAPIC) "
"configuration information\n");
+ if (!mpf)
+ return;
+
printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n",
mpf->mpf_specification);
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
#include <asm/paravirt.h>
-static void default_spin_lock_flags(struct raw_spinlock *lock, unsigned long flags)
+static inline void
+default_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
{
__raw_spin_lock(lock);
}
spin_lock_irqsave(&iommu_bitmap_lock, flags);
iommu_area_free(iommu_gart_bitmap, offset, size);
+ if (offset >= next_bit)
+ next_bit = offset + size;
spin_unlock_irqrestore(&iommu_bitmap_lock, flags);
}
*cpu_type = "i386/pii";
break;
case 6 ... 8:
+ case 10 ... 11:
*cpu_type = "i386/piii";
break;
case 9:
+ case 13:
*cpu_type = "i386/p6_mobile";
break;
- case 10 ... 13:
- *cpu_type = "i386/p6";
- break;
case 14:
*cpu_type = "i386/core";
break;
unsigned int low, high;
int i;
+ if (!reset_value)
+ return;
for (i = 0; i < num_counters; ++i) {
if (reset_value[i]) {
CTRL_READ(low, high, msrs, i);
unsigned int low, high;
int i;
+ if (!reset_value)
+ return;
for (i = 0; i < num_counters; ++i) {
if (!reset_value[i])
continue;
rq->timeout = q->sg_timeout;
if (!rq->timeout)
rq->timeout = BLK_DEFAULT_SG_TIMEOUT;
+ if (rq->timeout < BLK_MIN_SG_TIMEOUT)
+ rq->timeout = BLK_MIN_SG_TIMEOUT;
return 0;
}
case DVD_WRITE_STRUCT:
case DVD_AUTH:
arg = (unsigned long)compat_ptr(arg);
+ /* These intepret arg as an unsigned long, not as a pointer,
+ * so we must not do compat_ptr() conversion. */
+ case HDIO_SET_MULTCOUNT:
+ case HDIO_SET_UNMASKINTR:
+ case HDIO_SET_KEEPSETTINGS:
+ case HDIO_SET_32BIT:
+ case HDIO_SET_NOWERR:
+ case HDIO_SET_DMA:
+ case HDIO_SET_PIO_MODE:
+ case HDIO_SET_NICE:
+ case HDIO_SET_WCACHE:
+ case HDIO_SET_ACOUSTIC:
+ case HDIO_SET_BUSSTATE:
+ case HDIO_SET_ADDRESS:
+ case CDROMEJECT_SW:
+ case CDROM_SET_OPTIONS:
+ case CDROM_CLEAR_OPTIONS:
+ case CDROM_SELECT_SPEED:
+ case CDROM_SELECT_DISC:
+ case CDROM_MEDIA_CHANGED:
+ case CDROM_DRIVE_STATUS:
+ case CDROM_LOCKDOOR:
+ case CDROM_DEBUG:
break;
default:
/* unknown ioctl number */
struct backing_dev_info *bdi;
loff_t size;
+ /*
+ * O_NDELAY can be altered using fcntl(.., F_SETFL, ..), so we have
+ * to updated it before every ioctl.
+ */
if (file->f_flags & O_NDELAY)
- mode |= FMODE_NDELAY_NOW;
+ mode |= FMODE_NDELAY;
+ else
+ mode &= ~FMODE_NDELAY;
switch (cmd) {
case HDIO_GETGEO:
rq->timeout = q->sg_timeout;
if (!rq->timeout)
rq->timeout = BLK_DEFAULT_SG_TIMEOUT;
+ if (rq->timeout < BLK_MIN_SG_TIMEOUT)
+ rq->timeout = BLK_MIN_SG_TIMEOUT;
return 0;
}
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
val->intval = battery->current_now * 1000;
- /* if power units are mW, convert to mA by
- dividing by current voltage (mV/1000) */
- if (!battery->power_unit) {
- if (battery->voltage_now) {
- val->intval /= battery->voltage_now;
- val->intval *= 1000;
- } else
- val->intval = -1;
- }
break;
case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
return 0;
out_mem:
- blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
+ blkdev_put(bdev, FMODE_READ | FMODE_NDELAY);
/* This is safe: open() is still holding a reference. */
module_put(THIS_MODULE);
return ret;
pkt_debugfs_dev_remove(pd);
pkt_sysfs_dev_remove(pd);
- blkdev_put(pd->bdev, FMODE_READ|FMODE_WRITE);
+ blkdev_put(pd->bdev, FMODE_READ | FMODE_NDELAY);
remove_proc_entry(pd->name, pkt_proc);
DPRINTK(DRIVER_NAME": writer %s unmapped\n", pd->name);
TTY_OVERRUN);
/*
If the flip buffer itself is
- overflowing, we still loose
+ overflowing, we still lose
the next incoming character.
*/
if (tty_buffer_request_room(tty, 1) !=
* List of objects currently involved in rendering from the
* ringbuffer.
*
+ * Includes buffers having the contents of their GPU caches
+ * flushed, not necessarily primitives. last_rendering_seqno
+ * represents when the rendering involved will be completed.
+ *
* A reference is held on the buffer while on this list.
*/
struct list_head active_list;
* still have a write_domain which needs to be flushed before
* unbinding.
*
+ * last_rendering_seqno is 0 while an object is in this list.
+ *
* A reference is held on the buffer while on this list.
*/
struct list_head flushing_list;
* LRU list of objects which are not in the ringbuffer and
* are ready to unbind, but are still in the GTT.
*
+ * last_rendering_seqno is 0 while an object is in this list.
+ *
* A reference is not held on the buffer while on this list,
* as merely being GTT-bound shouldn't prevent its being
* freed, and we'll pull it off the list in the free path.
uint32_t agp_type;
/**
- * Flagging of which individual pages are valid in GEM_DOMAIN_CPU when
- * GEM_DOMAIN_CPU is not in the object's read domain.
+ * If present, while GEM_DOMAIN_CPU is in the read domain this array
+ * flags which individual pages are valid.
*/
uint8_t *page_cpu_valid;
};
/** Time at which this request was emitted, in jiffies. */
unsigned long emitted_jiffies;
- /** Cache domains that were flushed at the start of the request. */
- uint32_t flush_domains;
-
struct list_head list;
};
#define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
-static int
-i915_gem_object_set_domain(struct drm_gem_object *obj,
- uint32_t read_domains,
- uint32_t write_domain);
-static int
-i915_gem_object_set_domain_range(struct drm_gem_object *obj,
- uint64_t offset,
- uint64_t size,
- uint32_t read_domains,
- uint32_t write_domain);
-static int
-i915_gem_set_domain(struct drm_gem_object *obj,
- struct drm_file *file_priv,
- uint32_t read_domains,
- uint32_t write_domain);
+static void
+i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj,
+ uint32_t read_domains,
+ uint32_t write_domain);
+static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj);
+static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj);
+static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj);
+static int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
+ int write);
+static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj,
+ int write);
+static int i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj,
+ uint64_t offset,
+ uint64_t size);
+static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj);
static int i915_gem_object_get_page_list(struct drm_gem_object *obj);
static void i915_gem_object_free_page_list(struct drm_gem_object *obj);
static int i915_gem_object_wait_rendering(struct drm_gem_object *obj);
mutex_lock(&dev->struct_mutex);
- ret = i915_gem_object_set_domain_range(obj, args->offset, args->size,
- I915_GEM_DOMAIN_CPU, 0);
+ ret = i915_gem_object_set_cpu_read_domain_range(obj, args->offset,
+ args->size);
if (ret != 0) {
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
mutex_unlock(&dev->struct_mutex);
return ret;
}
- ret = i915_gem_set_domain(obj, file_priv,
- I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT);
+ ret = i915_gem_object_set_to_gtt_domain(obj, 1);
if (ret)
goto fail;
mutex_lock(&dev->struct_mutex);
- ret = i915_gem_set_domain(obj, file_priv,
- I915_GEM_DOMAIN_CPU, I915_GEM_DOMAIN_CPU);
+ ret = i915_gem_object_set_to_cpu_domain(obj, 1);
if (ret) {
mutex_unlock(&dev->struct_mutex);
return ret;
}
/**
- * Called when user space prepares to use an object
+ * Called when user space prepares to use an object with the CPU, either
+ * through the mmap ioctl's mapping or a GTT mapping.
*/
int
i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
{
struct drm_i915_gem_set_domain *args = data;
struct drm_gem_object *obj;
+ uint32_t read_domains = args->read_domains;
+ uint32_t write_domain = args->write_domain;
int ret;
if (!(dev->driver->driver_features & DRIVER_GEM))
return -ENODEV;
+ /* Only handle setting domains to types used by the CPU. */
+ if (write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+ return -EINVAL;
+
+ if (read_domains & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+ return -EINVAL;
+
+ /* Having something in the write domain implies it's in the read
+ * domain, and only that read domain. Enforce that in the request.
+ */
+ if (write_domain != 0 && read_domains != write_domain)
+ return -EINVAL;
+
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
if (obj == NULL)
return -EBADF;
mutex_lock(&dev->struct_mutex);
#if WATCH_BUF
DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n",
- obj, obj->size, args->read_domains, args->write_domain);
+ obj, obj->size, read_domains, write_domain);
#endif
- ret = i915_gem_set_domain(obj, file_priv,
- args->read_domains, args->write_domain);
+ if (read_domains & I915_GEM_DOMAIN_GTT) {
+ ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0);
+
+ /* Silently promote "you're not bound, there was nothing to do"
+ * to success, since the client was just asking us to
+ * make sure everything was done.
+ */
+ if (ret == -EINVAL)
+ ret = 0;
+ } else {
+ ret = i915_gem_object_set_to_cpu_domain(obj, write_domain != 0);
+ }
+
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
return ret;
obj_priv = obj->driver_private;
/* Pinned buffers may be scanout, so flush the cache */
- if ((obj->write_domain & I915_GEM_DOMAIN_CPU) && obj_priv->pin_count) {
- i915_gem_clflush_object(obj);
- drm_agp_chipset_flush(dev);
- }
+ if (obj_priv->pin_count)
+ i915_gem_object_flush_cpu_write_domain(obj);
+
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
return ret;
}
static void
-i915_gem_object_move_to_active(struct drm_gem_object *obj)
+i915_gem_object_move_to_active(struct drm_gem_object *obj, uint32_t seqno)
{
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
/* Move from whatever list we were on to the tail of execution. */
list_move_tail(&obj_priv->list,
&dev_priv->mm.active_list);
+ obj_priv->last_rendering_seqno = seqno;
}
+static void
+i915_gem_object_move_to_flushing(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+ BUG_ON(!obj_priv->active);
+ list_move_tail(&obj_priv->list, &dev_priv->mm.flushing_list);
+ obj_priv->last_rendering_seqno = 0;
+}
static void
i915_gem_object_move_to_inactive(struct drm_gem_object *obj)
else
list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list);
+ obj_priv->last_rendering_seqno = 0;
if (obj_priv->active) {
obj_priv->active = 0;
drm_gem_object_unreference(obj);
request->seqno = seqno;
request->emitted_jiffies = jiffies;
- request->flush_domains = flush_domains;
was_empty = list_empty(&dev_priv->mm.request_list);
list_add_tail(&request->list, &dev_priv->mm.request_list);
+ /* Associate any objects on the flushing list matching the write
+ * domain we're flushing with our flush.
+ */
+ if (flush_domains != 0) {
+ struct drm_i915_gem_object *obj_priv, *next;
+
+ list_for_each_entry_safe(obj_priv, next,
+ &dev_priv->mm.flushing_list, list) {
+ struct drm_gem_object *obj = obj_priv->obj;
+
+ if ((obj->write_domain & flush_domains) ==
+ obj->write_domain) {
+ obj->write_domain = 0;
+ i915_gem_object_move_to_active(obj, seqno);
+ }
+ }
+
+ }
+
if (was_empty && !dev_priv->mm.suspended)
schedule_delayed_work(&dev_priv->mm.retire_work, HZ);
return seqno;
__func__, request->seqno, obj);
#endif
- if (obj->write_domain != 0) {
- list_move_tail(&obj_priv->list,
- &dev_priv->mm.flushing_list);
- } else {
+ if (obj->write_domain != 0)
+ i915_gem_object_move_to_flushing(obj);
+ else
i915_gem_object_move_to_inactive(obj);
- }
- }
-
- if (request->flush_domains != 0) {
- struct drm_i915_gem_object *obj_priv, *next;
-
- /* Clear the write domain and activity from any buffers
- * that are just waiting for a flush matching the one retired.
- */
- list_for_each_entry_safe(obj_priv, next,
- &dev_priv->mm.flushing_list, list) {
- struct drm_gem_object *obj = obj_priv->obj;
-
- if (obj->write_domain & request->flush_domains) {
- obj->write_domain = 0;
- i915_gem_object_move_to_inactive(obj);
- }
- }
-
}
}
struct drm_i915_gem_object *obj_priv = obj->driver_private;
int ret;
- /* If there are writes queued to the buffer, flush and
- * create a new seqno to wait for.
+ /* This function only exists to support waiting for existing rendering,
+ * not for emitting required flushes.
*/
- if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) {
- uint32_t write_domain = obj->write_domain;
-#if WATCH_BUF
- DRM_INFO("%s: flushing object %p from write domain %08x\n",
- __func__, obj, write_domain);
-#endif
- i915_gem_flush(dev, 0, write_domain);
-
- i915_gem_object_move_to_active(obj);
- obj_priv->last_rendering_seqno = i915_add_request(dev,
- write_domain);
- BUG_ON(obj_priv->last_rendering_seqno == 0);
-#if WATCH_LRU
- DRM_INFO("%s: flush moves to exec list %p\n", __func__, obj);
-#endif
- }
+ BUG_ON((obj->write_domain & I915_GEM_GPU_DOMAINS) != 0);
/* If there is rendering queued on the buffer being evicted, wait for
* it.
return -EINVAL;
}
- /* Wait for any rendering to complete
- */
- ret = i915_gem_object_wait_rendering(obj);
- if (ret) {
- DRM_ERROR("wait_rendering failed: %d\n", ret);
- return ret;
- }
-
/* Move the object to the CPU domain to ensure that
* any possible CPU writes while it's not in the GTT
* are flushed when we go to remap it. This will
* also ensure that all pending GPU writes are finished
* before we unbind.
*/
- ret = i915_gem_object_set_domain(obj, I915_GEM_DOMAIN_CPU,
- I915_GEM_DOMAIN_CPU);
+ ret = i915_gem_object_set_to_cpu_domain(obj, 1);
if (ret) {
- DRM_ERROR("set_domain failed: %d\n", ret);
+ if (ret != -ERESTARTSYS)
+ DRM_ERROR("set_domain failed: %d\n", ret);
return ret;
}
return ret;
}
+static int
+i915_gem_evict_everything(struct drm_device *dev)
+{
+ int ret;
+
+ for (;;) {
+ ret = i915_gem_evict_something(dev);
+ if (ret != 0)
+ break;
+ }
+ return ret;
+}
+
static int
i915_gem_object_get_page_list(struct drm_gem_object *obj)
{
ret = i915_gem_evict_something(dev);
if (ret != 0) {
- DRM_ERROR("Failed to evict a buffer %d\n", ret);
+ if (ret != -ERESTARTSYS)
+ DRM_ERROR("Failed to evict a buffer %d\n", ret);
return ret;
}
goto search_free;
drm_clflush_pages(obj_priv->page_list, obj->size / PAGE_SIZE);
}
+/** Flushes any GPU write domain for the object if it's dirty. */
+static void
+i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ uint32_t seqno;
+
+ if ((obj->write_domain & I915_GEM_GPU_DOMAINS) == 0)
+ return;
+
+ /* Queue the GPU write cache flushing we need. */
+ i915_gem_flush(dev, 0, obj->write_domain);
+ seqno = i915_add_request(dev, obj->write_domain);
+ obj->write_domain = 0;
+ i915_gem_object_move_to_active(obj, seqno);
+}
+
+/** Flushes the GTT write domain for the object if it's dirty. */
+static void
+i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj)
+{
+ if (obj->write_domain != I915_GEM_DOMAIN_GTT)
+ return;
+
+ /* No actual flushing is required for the GTT write domain. Writes
+ * to it immediately go to main memory as far as we know, so there's
+ * no chipset flush. It also doesn't land in render cache.
+ */
+ obj->write_domain = 0;
+}
+
+/** Flushes the CPU write domain for the object if it's dirty. */
+static void
+i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+
+ if (obj->write_domain != I915_GEM_DOMAIN_CPU)
+ return;
+
+ i915_gem_clflush_object(obj);
+ drm_agp_chipset_flush(dev);
+ obj->write_domain = 0;
+}
+
+/**
+ * Moves a single object to the GTT read, and possibly write domain.
+ *
+ * This function returns when the move is complete, including waiting on
+ * flushes to occur.
+ */
+static int
+i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write)
+{
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ int ret;
+
+ /* Not valid to be called on unbound objects. */
+ if (obj_priv->gtt_space == NULL)
+ return -EINVAL;
+
+ i915_gem_object_flush_gpu_write_domain(obj);
+ /* Wait on any GPU rendering and flushing to occur. */
+ ret = i915_gem_object_wait_rendering(obj);
+ if (ret != 0)
+ return ret;
+
+ /* If we're writing through the GTT domain, then CPU and GPU caches
+ * will need to be invalidated at next use.
+ */
+ if (write)
+ obj->read_domains &= I915_GEM_DOMAIN_GTT;
+
+ i915_gem_object_flush_cpu_write_domain(obj);
+
+ /* It should now be out of any other write domains, and we can update
+ * the domain values for our changes.
+ */
+ BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0);
+ obj->read_domains |= I915_GEM_DOMAIN_GTT;
+ if (write) {
+ obj->write_domain = I915_GEM_DOMAIN_GTT;
+ obj_priv->dirty = 1;
+ }
+
+ return 0;
+}
+
+/**
+ * Moves a single object to the CPU read, and possibly write domain.
+ *
+ * This function returns when the move is complete, including waiting on
+ * flushes to occur.
+ */
+static int
+i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write)
+{
+ struct drm_device *dev = obj->dev;
+ int ret;
+
+ i915_gem_object_flush_gpu_write_domain(obj);
+ /* Wait on any GPU rendering and flushing to occur. */
+ ret = i915_gem_object_wait_rendering(obj);
+ if (ret != 0)
+ return ret;
+
+ i915_gem_object_flush_gtt_write_domain(obj);
+
+ /* If we have a partially-valid cache of the object in the CPU,
+ * finish invalidating it and free the per-page flags.
+ */
+ i915_gem_object_set_to_full_cpu_read_domain(obj);
+
+ /* Flush the CPU cache if it's still invalid. */
+ if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) {
+ i915_gem_clflush_object(obj);
+ drm_agp_chipset_flush(dev);
+
+ obj->read_domains |= I915_GEM_DOMAIN_CPU;
+ }
+
+ /* It should now be out of any other write domains, and we can update
+ * the domain values for our changes.
+ */
+ BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0);
+
+ /* If we're writing through the CPU, then the GPU read domains will
+ * need to be invalidated at next use.
+ */
+ if (write) {
+ obj->read_domains &= I915_GEM_DOMAIN_CPU;
+ obj->write_domain = I915_GEM_DOMAIN_CPU;
+ }
+
+ return 0;
+}
+
/*
* Set the next domain for the specified object. This
* may not actually perform the necessary flushing/invaliding though,
* MI_FLUSH
* drm_agp_chipset_flush
*/
-static int
-i915_gem_object_set_domain(struct drm_gem_object *obj,
- uint32_t read_domains,
- uint32_t write_domain)
+static void
+i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj,
+ uint32_t read_domains,
+ uint32_t write_domain)
{
struct drm_device *dev = obj->dev;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
uint32_t invalidate_domains = 0;
uint32_t flush_domains = 0;
- int ret;
+
+ BUG_ON(read_domains & I915_GEM_DOMAIN_CPU);
+ BUG_ON(write_domain == I915_GEM_DOMAIN_CPU);
#if WATCH_BUF
DRM_INFO("%s: object %p read %08x -> %08x write %08x -> %08x\n",
DRM_INFO("%s: CPU domain flush %08x invalidate %08x\n",
__func__, flush_domains, invalidate_domains);
#endif
- /*
- * If we're invaliding the CPU cache and flushing a GPU cache,
- * then pause for rendering so that the GPU caches will be
- * flushed before the cpu cache is invalidated
- */
- if ((invalidate_domains & I915_GEM_DOMAIN_CPU) &&
- (flush_domains & ~(I915_GEM_DOMAIN_CPU |
- I915_GEM_DOMAIN_GTT))) {
- ret = i915_gem_object_wait_rendering(obj);
- if (ret)
- return ret;
- }
i915_gem_clflush_object(obj);
}
if ((write_domain | flush_domains) != 0)
obj->write_domain = write_domain;
-
- /* If we're invalidating the CPU domain, clear the per-page CPU
- * domain list as well.
- */
- if (obj_priv->page_cpu_valid != NULL &&
- (write_domain != 0 ||
- read_domains & I915_GEM_DOMAIN_CPU)) {
- drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE,
- DRM_MEM_DRIVER);
- obj_priv->page_cpu_valid = NULL;
- }
obj->read_domains = read_domains;
dev->invalidate_domains |= invalidate_domains;
obj->read_domains, obj->write_domain,
dev->invalidate_domains, dev->flush_domains);
#endif
- return 0;
}
/**
- * Set the read/write domain on a range of the object.
+ * Moves the object from a partially CPU read to a full one.
*
- * Currently only implemented for CPU reads, otherwise drops to normal
- * i915_gem_object_set_domain().
+ * Note that this only resolves i915_gem_object_set_cpu_read_domain_range(),
+ * and doesn't handle transitioning from !(read_domains & I915_GEM_DOMAIN_CPU).
*/
-static int
-i915_gem_object_set_domain_range(struct drm_gem_object *obj,
- uint64_t offset,
- uint64_t size,
- uint32_t read_domains,
- uint32_t write_domain)
+static void
+i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj)
{
+ struct drm_device *dev = obj->dev;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
- int ret, i;
- if (obj->read_domains & I915_GEM_DOMAIN_CPU)
- return 0;
+ if (!obj_priv->page_cpu_valid)
+ return;
- if (read_domains != I915_GEM_DOMAIN_CPU ||
- write_domain != 0)
- return i915_gem_object_set_domain(obj,
- read_domains, write_domain);
+ /* If we're partially in the CPU read domain, finish moving it in.
+ */
+ if (obj->read_domains & I915_GEM_DOMAIN_CPU) {
+ int i;
- /* Wait on any GPU rendering to the object to be flushed. */
+ for (i = 0; i <= (obj->size - 1) / PAGE_SIZE; i++) {
+ if (obj_priv->page_cpu_valid[i])
+ continue;
+ drm_clflush_pages(obj_priv->page_list + i, 1);
+ }
+ drm_agp_chipset_flush(dev);
+ }
+
+ /* Free the page_cpu_valid mappings which are now stale, whether
+ * or not we've got I915_GEM_DOMAIN_CPU.
+ */
+ drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE,
+ DRM_MEM_DRIVER);
+ obj_priv->page_cpu_valid = NULL;
+}
+
+/**
+ * Set the CPU read domain on a range of the object.
+ *
+ * The object ends up with I915_GEM_DOMAIN_CPU in its read flags although it's
+ * not entirely valid. The page_cpu_valid member of the object flags which
+ * pages have been flushed, and will be respected by
+ * i915_gem_object_set_to_cpu_domain() if it's called on to get a valid mapping
+ * of the whole object.
+ *
+ * This function returns when the move is complete, including waiting on
+ * flushes to occur.
+ */
+static int
+i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj,
+ uint64_t offset, uint64_t size)
+{
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ int i, ret;
+
+ if (offset == 0 && size == obj->size)
+ return i915_gem_object_set_to_cpu_domain(obj, 0);
+
+ i915_gem_object_flush_gpu_write_domain(obj);
+ /* Wait on any GPU rendering and flushing to occur. */
ret = i915_gem_object_wait_rendering(obj);
- if (ret)
+ if (ret != 0)
return ret;
+ i915_gem_object_flush_gtt_write_domain(obj);
+ /* If we're already fully in the CPU read domain, we're done. */
+ if (obj_priv->page_cpu_valid == NULL &&
+ (obj->read_domains & I915_GEM_DOMAIN_CPU) != 0)
+ return 0;
+
+ /* Otherwise, create/clear the per-page CPU read domain flag if we're
+ * newly adding I915_GEM_DOMAIN_CPU
+ */
if (obj_priv->page_cpu_valid == NULL) {
obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE,
DRM_MEM_DRIVER);
- }
+ if (obj_priv->page_cpu_valid == NULL)
+ return -ENOMEM;
+ } else if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0)
+ memset(obj_priv->page_cpu_valid, 0, obj->size / PAGE_SIZE);
/* Flush the cache on any pages that are still invalid from the CPU's
* perspective.
*/
- for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; i++) {
+ for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE;
+ i++) {
if (obj_priv->page_cpu_valid[i])
continue;
obj_priv->page_cpu_valid[i] = 1;
}
- return 0;
-}
-
-/**
- * Once all of the objects have been set in the proper domain,
- * perform the necessary flush and invalidate operations.
- *
- * Returns the write domains flushed, for use in flush tracking.
- */
-static uint32_t
-i915_gem_dev_set_domain(struct drm_device *dev)
-{
- uint32_t flush_domains = dev->flush_domains;
-
- /*
- * Now that all the buffers are synced to the proper domains,
- * flush and invalidate the collected domains
+ /* It should now be out of any other write domains, and we can update
+ * the domain values for our changes.
*/
- if (dev->invalidate_domains | dev->flush_domains) {
-#if WATCH_EXEC
- DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
- __func__,
- dev->invalidate_domains,
- dev->flush_domains);
-#endif
- i915_gem_flush(dev,
- dev->invalidate_domains,
- dev->flush_domains);
- dev->invalidate_domains = 0;
- dev->flush_domains = 0;
- }
+ BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0);
- return flush_domains;
+ obj->read_domains |= I915_GEM_DOMAIN_CPU;
+
+ return 0;
}
/**
return -EINVAL;
}
+ if (reloc.write_domain & I915_GEM_DOMAIN_CPU ||
+ reloc.read_domains & I915_GEM_DOMAIN_CPU) {
+ DRM_ERROR("reloc with read/write CPU domains: "
+ "obj %p target %d offset %d "
+ "read %08x write %08x",
+ obj, reloc.target_handle,
+ (int) reloc.offset,
+ reloc.read_domains,
+ reloc.write_domain);
+ return -EINVAL;
+ }
+
if (reloc.write_domain && target_obj->pending_write_domain &&
reloc.write_domain != target_obj->pending_write_domain) {
DRM_ERROR("Write domain conflict: "
continue;
}
- /* Now that we're going to actually write some data in,
- * make sure that any rendering using this buffer's contents
- * is completed.
- */
- i915_gem_object_wait_rendering(obj);
-
- /* As we're writing through the gtt, flush
- * any CPU writes before we write the relocations
- */
- if (obj->write_domain & I915_GEM_DOMAIN_CPU) {
- i915_gem_clflush_object(obj);
- drm_agp_chipset_flush(dev);
- obj->write_domain = 0;
+ ret = i915_gem_object_set_to_gtt_domain(obj, 1);
+ if (ret != 0) {
+ drm_gem_object_unreference(target_obj);
+ i915_gem_object_unpin(obj);
+ return -EINVAL;
}
/* Map the page containing the relocation we're going to
int ret, i, pinned = 0;
uint64_t exec_offset;
uint32_t seqno, flush_domains;
+ int pin_tries;
#if WATCH_EXEC
DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n",
return -EBUSY;
}
- /* Zero the gloabl flush/invalidate flags. These
- * will be modified as each object is bound to the
- * gtt
- */
- dev->invalidate_domains = 0;
- dev->flush_domains = 0;
-
- /* Look up object handles and perform the relocations */
+ /* Look up object handles */
for (i = 0; i < args->buffer_count; i++) {
object_list[i] = drm_gem_object_lookup(dev, file_priv,
exec_list[i].handle);
ret = -EBADF;
goto err;
}
+ }
- object_list[i]->pending_read_domains = 0;
- object_list[i]->pending_write_domain = 0;
- ret = i915_gem_object_pin_and_relocate(object_list[i],
- file_priv,
- &exec_list[i]);
- if (ret) {
- DRM_ERROR("object bind and relocate failed %d\n", ret);
+ /* Pin and relocate */
+ for (pin_tries = 0; ; pin_tries++) {
+ ret = 0;
+ for (i = 0; i < args->buffer_count; i++) {
+ object_list[i]->pending_read_domains = 0;
+ object_list[i]->pending_write_domain = 0;
+ ret = i915_gem_object_pin_and_relocate(object_list[i],
+ file_priv,
+ &exec_list[i]);
+ if (ret)
+ break;
+ pinned = i + 1;
+ }
+ /* success */
+ if (ret == 0)
+ break;
+
+ /* error other than GTT full, or we've already tried again */
+ if (ret != -ENOMEM || pin_tries >= 1) {
+ DRM_ERROR("Failed to pin buffers %d\n", ret);
goto err;
}
- pinned = i + 1;
+
+ /* unpin all of our buffers */
+ for (i = 0; i < pinned; i++)
+ i915_gem_object_unpin(object_list[i]);
+
+ /* evict everyone we can from the aperture */
+ ret = i915_gem_evict_everything(dev);
+ if (ret)
+ goto err;
}
/* Set the pending read domains for the batch buffer to COMMAND */
i915_verify_inactive(dev, __FILE__, __LINE__);
+ /* Zero the global flush/invalidate flags. These
+ * will be modified as new domains are computed
+ * for each object
+ */
+ dev->invalidate_domains = 0;
+ dev->flush_domains = 0;
+
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
- /* make sure all previous memory operations have passed */
- ret = i915_gem_object_set_domain(obj,
- obj->pending_read_domains,
- obj->pending_write_domain);
- if (ret)
- goto err;
+ /* Compute new gpu domains and update invalidate/flush */
+ i915_gem_object_set_to_gpu_domain(obj,
+ obj->pending_read_domains,
+ obj->pending_write_domain);
}
i915_verify_inactive(dev, __FILE__, __LINE__);
- /* Flush/invalidate caches and chipset buffer */
- flush_domains = i915_gem_dev_set_domain(dev);
+ if (dev->invalidate_domains | dev->flush_domains) {
+#if WATCH_EXEC
+ DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
+ __func__,
+ dev->invalidate_domains,
+ dev->flush_domains);
+#endif
+ i915_gem_flush(dev,
+ dev->invalidate_domains,
+ dev->flush_domains);
+ if (dev->flush_domains)
+ (void)i915_add_request(dev, dev->flush_domains);
+ }
i915_verify_inactive(dev, __FILE__, __LINE__);
~0);
#endif
- (void)i915_add_request(dev, flush_domains);
-
/* Exec the batchbuffer */
ret = i915_dispatch_gem_execbuffer(dev, args, exec_offset);
if (ret) {
i915_file_priv->mm.last_gem_seqno = seqno;
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
- i915_gem_object_move_to_active(obj);
- obj_priv->last_rendering_seqno = seqno;
+ i915_gem_object_move_to_active(obj, seqno);
#if WATCH_LRU
DRM_INFO("%s: move to exec list %p\n", __func__, obj);
#endif
/* XXX - flush the CPU caches for pinned objects
* as the X server doesn't manage domains yet
*/
- if (obj->write_domain & I915_GEM_DOMAIN_CPU) {
- i915_gem_clflush_object(obj);
- drm_agp_chipset_flush(dev);
- obj->write_domain = 0;
- }
+ i915_gem_object_flush_cpu_write_domain(obj);
args->offset = obj_priv->gtt_offset;
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
drm_free(obj->driver_private, 1, DRM_MEM_DRIVER);
}
-static int
-i915_gem_set_domain(struct drm_gem_object *obj,
- struct drm_file *file_priv,
- uint32_t read_domains,
- uint32_t write_domain)
-{
- struct drm_device *dev = obj->dev;
- int ret;
- uint32_t flush_domains;
-
- BUG_ON(!mutex_is_locked(&dev->struct_mutex));
-
- ret = i915_gem_object_set_domain(obj, read_domains, write_domain);
- if (ret)
- return ret;
- flush_domains = i915_gem_dev_set_domain(obj->dev);
-
- if (flush_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT))
- (void) i915_add_request(dev, flush_domains);
-
- return 0;
-}
-
/** Unbinds all objects that are on the given buffer list. */
static int
i915_gem_evict_from_list(struct drm_device *dev, struct list_head *head)
list_for_each_entry(gem_request, &dev_priv->mm.request_list,
list)
{
- DRM_PROC_PRINT(" %d @ %d %08x\n",
+ DRM_PROC_PRINT(" %d @ %d\n",
gem_request->seqno,
- (int) (jiffies - gem_request->emitted_jiffies),
- gem_request->flush_domains);
+ (int) (jiffies - gem_request->emitted_jiffies));
}
if (len > request + offset)
return request;
dcc & DCC_CHANNEL_XOR_DISABLE) {
swizzle_x = I915_BIT_6_SWIZZLE_9_10;
swizzle_y = I915_BIT_6_SWIZZLE_9;
- } else if (IS_I965GM(dev) || IS_GM45(dev)) {
- /* GM965 only does bit 11-based channel
- * randomization
+ } else if ((IS_I965GM(dev) || IS_GM45(dev)) &&
+ (dcc & DCC_CHANNEL_XOR_BIT_17) == 0) {
+ /* GM965/GM45 does either bit 11 or bit 17
+ * swizzling.
*/
swizzle_x = I915_BIT_6_SWIZZLE_9_10_11;
swizzle_y = I915_BIT_6_SWIZZLE_9_11;
#define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED (2 << 0)
#define DCC_ADDRESSING_MODE_MASK (3 << 0)
#define DCC_CHANNEL_XOR_DISABLE (1 << 10)
+#define DCC_CHANNEL_XOR_BIT_17 (1 << 9)
/** 965 MCH register controlling DRAM channel configuration */
#define C0DRB3 0x10206
endif
+# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF
config BLK_DEV_IDE_PMAC
tristate "PowerMac on-board IDE support"
depends on PPC_PMAC && IDE=y
select IDE_TIMINGS
+ select BLK_DEV_IDEDMA_PCI
help
This driver provides support for the on-board IDE controller on
most of the recent Apple Power Macintoshes and PowerBooks.
CD-ROM on hda. This option changes this to more natural hda for
hard disk and hdc for CD-ROM.
-config BLK_DEV_IDEDMA_PMAC
- bool "PowerMac IDE DMA support"
- depends on BLK_DEV_IDE_PMAC
- select BLK_DEV_IDEDMA_PCI
- help
- This option allows the driver for the on-board IDE controller on
- Power Macintoshes and PowerBooks to use DMA (direct memory access)
- to transfer data to and from memory. Saying Y is safe and improves
- performance.
-
config BLK_DEV_IDE_AU1XXX
bool "IDE for AMD Alchemy Au1200"
depends on SOC_AU1200
endif
config BLK_DEV_IDEDMA
- def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \
+ def_bool BLK_DEV_IDEDMA_SFF || \
BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
endif # IDE
*/
if (drive->hwif->dma_ops == NULL)
break;
- if (drive->dev_flags & IDE_DFLAG_USING_DMA)
- ide_set_dma(drive);
+ /*
+ * TODO: respect IDE_DFLAG_USING_DMA
+ */
+ ide_set_dma(drive);
break;
}
struct macio_dev *mdev;
u32 timings[4];
volatile u32 __iomem * *kauai_fcr;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
/* Those fields are duplicating what is in hwif. We currently
* can't use the hwif ones because of some assumptions that are
* beeing done by the generic code about the kind of dma controller
*/
volatile struct dbdma_regs __iomem * dma_regs;
struct dbdma_cmd* dma_table_cpu;
-#endif
-
} pmac_ide_hwif_t;
enum {
#define KAUAI_FCR_UATA_RESET_N 0x00000002
#define KAUAI_FCR_UATA_ENABLE 0x00000001
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
/* Rounded Multiword DMA timings
*
* I gave up finding a generic formula for all controller
static void pmac_ide_selectproc(ide_drive_t *drive);
static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-
#define PMAC_IDE_REG(x) \
((void __iomem *)((drive)->hwif->io_ports.data_addr + (x)))
pmac_ide_do_update_timings(drive);
}
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
/*
* Calculate KeyLargo ATA/66 UDMA timings
*/
drive->name, speed & 0xf, *timings);
#endif
}
-#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
tl[0] = *timings;
tl[1] = *timings2;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
if (speed >= XFER_UDMA_0) {
if (pmif->kind == controller_kl_ata4)
ret = set_timings_udma_ata4(&tl[0], speed);
ret = -1;
} else
set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
if (ret)
return;
.chipset = ide_pmac,
.tp_ops = &pmac_tp_ops,
.port_ops = &pmac_ide_port_ops,
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
.dma_ops = &pmac_dma_ops,
-#endif
.host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
IDE_HFLAG_POST_SET_MODE |
IDE_HFLAG_MMIO |
pmif->regbase = regbase;
pmif->irq = irq;
pmif->kauai_fcr = NULL;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+
if (macio_resource_count(mdev) >= 2) {
if (macio_request_resource(mdev, 1, "ide-pmac (dma)"))
printk(KERN_WARNING "ide-pmac: can't request DMA "
pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000);
} else
pmif->dma_regs = NULL;
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
dev_set_drvdata(&mdev->ofdev.dev, pmif);
memset(&hw, 0, sizeof(hw));
base = ioremap(rbase, rlen);
pmif->regbase = (unsigned long) base + 0x2000;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
pmif->dma_regs = base + 0x1000;
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
pmif->kauai_fcr = base;
pmif->irq = pdev->irq;
return error;
}
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
/*
* pmac_ide_build_dmatable builds the DBDMA command list
* for a transfer and sets the DBDMA channel to point to it.
return 0;
}
-#else
-static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
- const struct ide_port_info *d)
-{
- return -EOPNOTSUPP;
-}
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
module_init(pmac_ide_probe);
int i;
for (i = 0; i < MAX_CARDS; i++) {
- if (!io[i])
- break;
-
- b1isa_remove(&isa_dev[i]);
+ if (isa_dev[i].resource[0].start)
+ b1isa_remove(&isa_dev[i]);
}
unregister_capi_driver(&capi_driver_b1isa);
}
/* Fill in the MAC-level header (if not already set) */
if (!card->mac_addr[0]) {
- for (i = 0; i < ETH_ALEN - sizeof(unsigned long); i++)
+ for (i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] = 0xfc;
if ((in_dev = dev->ip_ptr) != NULL) {
struct in_ifaddr *ifa = in_dev->ifa_list;
if (ifa != NULL)
- memcpy(dev->dev_addr + (ETH_ALEN - sizeof(unsigned long)), &ifa->ifa_local, sizeof(unsigned long));
+ memcpy(dev->dev_addr + (ETH_ALEN - sizeof(ifa->ifa_local)), &ifa->ifa_local, sizeof(ifa->ifa_local));
}
} else
memcpy(dev->dev_addr, card->mac_addr, ETH_ALEN);
* @req: the request to prepare
*
* Allocate the necessary i2o_block_request struct and connect it to
- * the request. This is needed that we not loose the SG list later on.
+ * the request. This is needed that we not lose the SG list later on.
*
* Returns BLKPREP_OK on success or BLKPREP_DEFER on failure.
*/
/**
* i2o_msg_get_wait - obtain an I2O message from the IOP
* @c: I2O controller
- * @msg: pointer to a I2O message pointer
* @wait: how long to wait until timeout
*
* This function waits up to wait seconds for a message slot to be
return 0;
}
+static void
+bnx2_chk_missed_msi(struct bnx2 *bp)
+{
+ struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
+ u32 msi_ctrl;
+
+ if (bnx2_has_work(bnapi)) {
+ msi_ctrl = REG_RD(bp, BNX2_PCICFG_MSI_CONTROL);
+ if (!(msi_ctrl & BNX2_PCICFG_MSI_CONTROL_ENABLE))
+ return;
+
+ if (bnapi->last_status_idx == bp->idle_chk_status_idx) {
+ REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl &
+ ~BNX2_PCICFG_MSI_CONTROL_ENABLE);
+ REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl);
+ bnx2_msi(bp->irq_tbl[0].vector, bnapi);
+ }
+ }
+
+ bp->idle_chk_status_idx = bnapi->last_status_idx;
+}
+
static void bnx2_poll_link(struct bnx2 *bp, struct bnx2_napi *bnapi)
{
struct status_block *sblk = bnapi->status_blk.msi;
work_done = bnx2_poll_work(bp, bnapi, work_done, budget);
- if (unlikely(work_done >= budget))
- break;
-
/* bnapi->last_status_idx is used below to tell the hw how
* much work has been processed, so we must read it before
* checking for more work.
*/
bnapi->last_status_idx = sblk->status_idx;
+
+ if (unlikely(work_done >= budget))
+ break;
+
rmb();
if (likely(!bnx2_has_work(bnapi))) {
netif_rx_complete(bp->dev, napi);
for (i = 0; i < BNX2_MAX_MSIX_VEC; i++)
bp->bnx2_napi[i].last_status_idx = 0;
+ bp->idle_chk_status_idx = 0xffff;
+
bp->rx_mode = BNX2_EMAC_RX_MODE_SORT_MODE;
/* Set up how to generate a link change interrupt. */
if (atomic_read(&bp->intr_sem) != 0)
goto bnx2_restart_timer;
+ if ((bp->flags & (BNX2_FLAG_USING_MSI | BNX2_FLAG_ONE_SHOT_MSI)) ==
+ BNX2_FLAG_USING_MSI)
+ bnx2_chk_missed_msi(bp);
+
bnx2_send_heart_beat(bp);
bp->stats_blk->stat_FwRxDrop =
* pci_config_l definition
* offset: 0000
*/
+#define BNX2_PCICFG_MSI_CONTROL 0x00000058
+#define BNX2_PCICFG_MSI_CONTROL_ENABLE (1L<<16)
+
#define BNX2_PCICFG_MISC_CONFIG 0x00000068
#define BNX2_PCICFG_MISC_CONFIG_TARGET_BYTE_SWAP (1L<<2)
#define BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP (1L<<3)
u8 num_tx_rings;
u8 num_rx_rings;
+
+ u32 idle_chk_status_idx;
+
};
#define REG_RD(bp, offset) \
return erxrdpt;
}
+/*
+ * Calculate wrap around when reading beyond the end of the RX buffer
+ */
+static u16 rx_packet_start(u16 ptr)
+{
+ if (ptr + RSV_SIZE > RXEND_INIT)
+ return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART_INIT + 1);
+ else
+ return ptr + RSV_SIZE;
+}
+
static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
{
u16 erxrdpt;
skb->dev = ndev;
skb_reserve(skb, NET_IP_ALIGN);
/* copy the packet from the receive buffer */
- enc28j60_mem_read(priv, priv->next_pk_ptr + sizeof(rsv),
- len, skb_put(skb, len));
+ enc28j60_mem_read(priv,
+ rx_packet_start(priv->next_pk_ptr),
+ len, skb_put(skb, len));
if (netif_msg_pktdata(priv))
dump_packet(__func__, skb->len, skb->data);
skb->protocol = eth_type_trans(skb, ndev);
priv->xmac_base = priv->xc->xmac_base;
priv->sram_base = priv->xc->sram_base;
+ spin_lock_init(&priv->lock);
+
ret = pfifo_request(PFIFO_MASK(priv->id));
if (ret) {
printk("unable to request PFIFO\n");
if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)))
return 0;
ipw_send_disassociate(data, 0);
+ netif_carrier_off(priv->net_dev);
return 1;
}
u16 remaining_bytes;
int fc;
+ if (!(priv->status & STATUS_ASSOCIATED))
+ goto drop;
+
hdr_len = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
switch (priv->ieee->iw_mode) {
case IW_MODE_ADHOC:
priv->num_stations = 0;
memset(priv->stations, 0, sizeof(priv->stations));
+ /* clean ucode key table bit map */
+ priv->ucode_key_table = 0;
+
spin_unlock_irqrestore(&priv->sta_lock, flags);
}
EXPORT_SYMBOL(iwl_clear_stations_table);
if (!test_and_set_bit(i, &priv->ucode_key_table))
return i;
- return -1;
+ return WEP_INVALID_OFFSET;
}
int iwl_send_static_wepkey_cmd(struct iwl_priv *priv, u8 send_if_empty)
/* else, we are overriding an existing key => no need to allocated room
* in uCode. */
+ WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
+ "no space for new kew");
+
priv->stations[sta_id].sta.key.key_flags = key_flags;
priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
{
unsigned long flags;
__le16 key_flags = 0;
+ int ret;
key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
/* else, we are overriding an existing key => no need to allocated room
* in uCode. */
+ WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
+ "no space for new kew");
+
priv->stations[sta_id].sta.key.key_flags = key_flags;
priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+ ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
+
spin_unlock_irqrestore(&priv->sta_lock, flags);
- IWL_DEBUG_INFO("hwcrypto: modify ucode station key info\n");
- return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
+ return ret;
}
static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv,
/* else, we are overriding an existing key => no need to allocated room
* in uCode. */
+ WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
+ "no space for new kew");
+
/* This copy is acutally not needed: we get the key with each TX */
memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16);
return 0;
}
+ if (priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET) {
+ IWL_WARNING("Removing wrong key %d 0x%x\n",
+ keyconf->keyidx, key_flags);
+ spin_unlock_irqrestore(&priv->sta_lock, flags);
+ return 0;
+ }
+
if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset,
&priv->ucode_key_table))
IWL_ERROR("index %d not used in uCode key table.\n",
struct ieee80211_hdr *tx_hdr;
tx_hdr = (struct ieee80211_hdr *)skb->data;
- if (likely(!compare_ether_addr(tx_hdr->addr2, rx_hdr->addr1)))
+ if (likely(!memcmp(tx_hdr->addr2, rx_hdr->addr1, ETH_ALEN)))
{
__skb_unlink(skb, q);
tx_status(hw, skb, IEEE80211_TX_STAT_ACK, stats->signal, 1);
* access to the device is prohibited.
*/
error = scsi_nonblockable_ioctl(sdp, cmd, p,
- (mode & FMODE_NDELAY_NOW) != 0);
+ (mode & FMODE_NDELAY) != 0);
if (!scsi_block_when_processing_errors(sdp) || !error)
return error;
* if it doesn't recognise the ioctl
*/
ret = scsi_nonblockable_ioctl(sdev, cmd, argp,
- (mode & FMODE_NDELAY_NOW) != 0);
+ (mode & FMODE_NDELAY) != 0);
if (ret != -ENODEV)
return ret;
return scsi_ioctl(sdev, cmd, argp);
/* Update the per-port timeout */
uart_update_timeout(port, new->c_cflag, baud);
- /* Do our best to flush TX & RX, so we don't loose anything */
- /* But we don't wait indefinitly ! */
+ /* Do our best to flush TX & RX, so we don't lose anything */
+ /* But we don't wait indefinitely ! */
j = 5000000; /* Maximum wait */
/* FIXME Can't receive chars since set_termios might be called at early
* boot for the console, all stuff is not yet ready to receive at that
priv->interface, buf, 0, WDR_TIMEOUT);
/* Termios defaults are set by usb_serial_init. We don't change
- port->tty->termios - this would loose speed settings, etc.
+ port->tty->termios - this would lose speed settings, etc.
This is same behaviour as serial.c/rs_open() - Kuba */
/* ftdi_set_termios will send usb control messages */
return;
/* We only do 1 bpp color expansion for now */
- if (info->flags & FBINFO_HWACCEL_DISABLED || image->depth != 1)
+ if (!accel_cexp ||
+ (info->flags & FBINFO_HWACCEL_DISABLED) || image->depth != 1)
goto fallback;
/* Fallback if running out of the screen. We may do clipping
static int backlight = 0;
#endif
+int accel_cexp = 0;
+
/*
* prototypes
*/
} else if (!strncmp(this_opt, "ignore_devlist", 14)) {
ignore_devlist = 1;
#endif
+ } else if (!strncmp(this_opt, "accel_cexp", 12)) {
+ accel_cexp = 1;
} else
mode_option = this_opt;
}
MODULE_PARM_DESC(monitor_layout, "Specify monitor mapping (like XFree86)");
module_param(force_measure_pll, bool, 0);
MODULE_PARM_DESC(force_measure_pll, "Force measurement of PLL (debug)");
+module_param(accel_cexp, bool, 0);
+MODULE_PARM_DESC(accel_cexp, "Use acceleration engine for color expansion");
#ifdef CONFIG_MTRR
module_param(nomtrr, bool, 0);
MODULE_PARM_DESC(nomtrr, "bool: disable use of MTRR registers");
static inline void radeonfb_bl_exit(struct radeonfb_info *rinfo) {}
#endif
+extern int accel_cexp;
+
#endif /* __RADEONFB_H__ */
if (res)
return res;
- if (!(filp->f_mode & FMODE_EXCL))
- return 0;
+ if (filp->f_mode & FMODE_EXCL) {
+ res = bd_claim(bdev, filp);
+ if (res)
+ goto out_blkdev_put;
+ }
- if (!(res = bd_claim(bdev, filp)))
- return 0;
+ return 0;
+ out_blkdev_put:
blkdev_put(bdev, filp->f_mode);
return res;
}
{
struct block_device *bdev = I_BDEV(file->f_mapping->host);
fmode_t mode = file->f_mode;
+
+ /*
+ * O_NDELAY can be altered using fcntl(.., F_SETFL, ..), so we have
+ * to updated it before every ioctl.
+ */
if (file->f_flags & O_NDELAY)
- mode |= FMODE_NDELAY_NOW;
+ mode |= FMODE_NDELAY;
+ else
+ mode &= ~FMODE_NDELAY;
+
return blkdev_ioctl(bdev, mode, cmd, arg);
}
* Try to get any dentry for the given file handle from the filesystem.
*/
result = nop->fh_to_dentry(mnt->mnt_sb, fid, fh_len, fileid_type);
+ if (!result)
+ result = ERR_PTR(-ESTALE);
if (IS_ERR(result))
return result;
target_dir = nop->fh_to_parent(mnt->mnt_sb, fid,
fh_len, fileid_type);
+ if (!target_dir)
+ goto err_result;
err = PTR_ERR(target_dir);
if (IS_ERR(target_dir))
goto err_result;
#include <linux/signal.h>
#include <linux/rcupdate.h>
#include <linux/pid_namespace.h>
+#include <linux/smp_lock.h>
#include <asm/poll.h>
#include <asm/siginfo.h>
if (error)
return error;
+ /*
+ * We still need a lock here for now to keep multiple FASYNC calls
+ * from racing with each other.
+ */
+ lock_kernel();
if ((arg ^ filp->f_flags) & FASYNC) {
if (filp->f_op && filp->f_op->fasync) {
error = filp->f_op->fasync(fd, filp, (arg & FASYNC) != 0);
filp->f_flags = (arg & SETFL_MASK) | (filp->f_flags & ~SETFL_MASK);
out:
+ unlock_kernel();
return error;
}
/* Did FASYNC state change ? */
if ((flag ^ filp->f_flags) & FASYNC) {
- if (filp->f_op && filp->f_op->fasync) {
- lock_kernel();
+ if (filp->f_op && filp->f_op->fasync)
error = filp->f_op->fasync(fd, filp, on);
- unlock_kernel();
- } else
+ else
error = -ENOTTY;
}
if (error)
break;
case FIONBIO:
+ /* BKL needed to avoid races tweaking f_flags */
+ lock_kernel();
error = ioctl_fionbio(filp, argp);
+ unlock_kernel();
break;
case FIOASYNC:
+ /* BKL needed to avoid races tweaking f_flags */
+ lock_kernel();
error = ioctl_fioasync(fd, filp, argp);
+ unlock_kernel();
break;
case FIOQSIZE:
if (unlikely((target_dp->i_d.di_flags & XFS_DIFLAG_PROJINHERIT) &&
(target_dp->i_d.di_projid != src_ip->i_d.di_projid))) {
error = XFS_ERROR(EXDEV);
- xfs_rename_unlock4(inodes, XFS_ILOCK_SHARED);
+ xfs_rename_unlock4(inodes, XFS_ILOCK_EXCL);
xfs_trans_cancel(tp, cancel_flags);
goto std_return;
}
* default timeout for SG_IO if none specified
*/
#define BLK_DEFAULT_SG_TIMEOUT (60 * HZ)
+#define BLK_MIN_SG_TIMEOUT (7 * HZ)
#ifdef CONFIG_BOUNCE
extern int init_emergency_isa_pool(void);
#include <linux/skbuff.h>
#include <linux/netdevice.h>
-#define CAN_VERSION "20071116"
+#define CAN_VERSION "20081130"
/* increment this number each time you change some user-space interface */
#define CAN_ABI_VERSION "8"
#define MAY_ACCESS 16
#define MAY_OPEN 32
-#define FMODE_READ ((__force fmode_t)1)
-#define FMODE_WRITE ((__force fmode_t)2)
-
-/* Internal kernel extensions */
-#define FMODE_LSEEK ((__force fmode_t)4)
-#define FMODE_PREAD ((__force fmode_t)8)
-#define FMODE_PWRITE FMODE_PREAD /* These go hand in hand */
-
-/* File is being opened for execution. Primary users of this flag are
- distributed filesystems that can use it to achieve correct ETXTBUSY
- behavior for cross-node execution/opening_for_writing of files */
-#define FMODE_EXEC ((__force fmode_t)16)
-
-#define FMODE_NDELAY ((__force fmode_t)32)
-#define FMODE_EXCL ((__force fmode_t)64)
+/* file is open for reading */
+#define FMODE_READ ((__force fmode_t)1)
+/* file is open for writing */
+#define FMODE_WRITE ((__force fmode_t)2)
+/* file is seekable */
+#define FMODE_LSEEK ((__force fmode_t)4)
+/* file can be accessed using pread/pwrite */
+#define FMODE_PREAD ((__force fmode_t)8)
+#define FMODE_PWRITE FMODE_PREAD /* These go hand in hand */
+/* File is opened for execution with sys_execve / sys_uselib */
+#define FMODE_EXEC ((__force fmode_t)16)
+/* File is opened with O_NDELAY (only set for block devices) */
+#define FMODE_NDELAY ((__force fmode_t)32)
+/* File is opened with O_EXCL (only set for block devices) */
+#define FMODE_EXCL ((__force fmode_t)64)
+/* File is opened using open(.., 3, ..) and is writeable only for ioctls
+ (specialy hack for floppy.c) */
#define FMODE_WRITE_IOCTL ((__force fmode_t)128)
-#define FMODE_NDELAY_NOW ((__force fmode_t)256)
#define RW_MASK 1
#define RWA_MASK 2
struct task_cputime cputime;
thread_group_cputime(p, &cputime);
- switch (which_clock) {
+ switch (CPUCLOCK_WHICH(which_clock)) {
default:
return -EINVAL;
case CPUCLOCK_PROF:
return;
}
- blkdev_put(resume_bdev, mode); /* move up */
+ blkdev_put(resume_bdev, mode);
}
static int swsusp_header_init(void)
if ((long)(now - t->last_switch_timestamp) <
sysctl_hung_task_timeout_secs)
return;
- if (sysctl_hung_task_warnings < 0)
+ if (!sysctl_hung_task_warnings)
return;
sysctl_hung_task_warnings--;
/* correct the clock when NTP error is too big */
clocksource_adjust(offset);
+ /*
+ * Since in the loop above, we accumulate any amount of time
+ * in xtime_nsec over a second into xtime.tv_sec, its possible for
+ * xtime_nsec to be fairly small after the loop. Further, if we're
+ * slightly speeding the clocksource up in clocksource_adjust(),
+ * its possible the required corrective factor to xtime_nsec could
+ * cause it to underflow.
+ *
+ * Now, we cannot simply roll the accumulated second back, since
+ * the NTP subsystem has been notified via second_overflow. So
+ * instead we push xtime_nsec forward by the amount we underflowed,
+ * and add that amount into the error.
+ *
+ * We'll correct this error next time through this function, when
+ * xtime_nsec is not as small.
+ */
+ if (unlikely((s64)clock->xtime_nsec < 0)) {
+ s64 neg = -(s64)clock->xtime_nsec;
+ clock->xtime_nsec = 0;
+ clock->error += neg << (NTP_SCALE_SHIFT - clock->shift);
+ }
+
/* store full nanoseconds into xtime after rounding it up and
* add the remainder to the error difference.
*/
error = -EINVAL;
goto out;
}
- vcc_insert_socket(sk);
+ if (test_bit(ATM_VF_LISTEN, &vcc->flags)) {
+ error = -EADDRINUSE;
+ goto out;
+ }
set_bit(ATM_VF_WAITING, &vcc->flags);
prepare_to_wait(sk->sk_sleep, &wait, TASK_UNINTERRUPTIBLE);
sigd_enq(vcc,as_listen,NULL,NULL,&vcc->local);
goto out;
}
set_bit(ATM_VF_LISTEN,&vcc->flags);
+ vcc_insert_socket(sk);
sk->sk_max_ack_backlog = backlog > 0 ? backlog : ATM_BACKLOG_DEFAULT;
error = -sk->sk_err;
out:
return n ? d : NULL;
}
+/**
+ * find_rcv_list - determine optimal filterlist inside device filter struct
+ * @can_id: pointer to CAN identifier of a given can_filter
+ * @mask: pointer to CAN mask of a given can_filter
+ * @d: pointer to the device filter struct
+ *
+ * Description:
+ * Returns the optimal filterlist to reduce the filter handling in the
+ * receive path. This function is called by service functions that need
+ * to register or unregister a can_filter in the filter lists.
+ *
+ * A filter matches in general, when
+ *
+ * <received_can_id> & mask == can_id & mask
+ *
+ * so every bit set in the mask (even CAN_EFF_FLAG, CAN_RTR_FLAG) describe
+ * relevant bits for the filter.
+ *
+ * The filter can be inverted (CAN_INV_FILTER bit set in can_id) or it can
+ * filter for error frames (CAN_ERR_FLAG bit set in mask). For error frames
+ * there is a special filterlist and a special rx path filter handling.
+ *
+ * Return:
+ * Pointer to optimal filterlist for the given can_id/mask pair.
+ * Constistency checked mask.
+ * Reduced can_id to have a preprocessed filter compare value.
+ */
static struct hlist_head *find_rcv_list(canid_t *can_id, canid_t *mask,
struct dev_rcv_lists *d)
{
canid_t inv = *can_id & CAN_INV_FILTER; /* save flag before masking */
- /* filter error frames */
+ /* filter for error frames in extra filterlist */
if (*mask & CAN_ERR_FLAG) {
- /* clear CAN_ERR_FLAG in list entry */
+ /* clear CAN_ERR_FLAG in filter entry */
*mask &= CAN_ERR_MASK;
return &d->rx[RX_ERR];
}
- /* ensure valid values in can_mask */
- if (*mask & CAN_EFF_FLAG)
- *mask &= (CAN_EFF_MASK | CAN_EFF_FLAG | CAN_RTR_FLAG);
- else
- *mask &= (CAN_SFF_MASK | CAN_RTR_FLAG);
+ /* with cleared CAN_ERR_FLAG we have a simple mask/value filterpair */
+
+#define CAN_EFF_RTR_FLAGS (CAN_EFF_FLAG | CAN_RTR_FLAG)
+
+ /* ensure valid values in can_mask for 'SFF only' frame filtering */
+ if ((*mask & CAN_EFF_FLAG) && !(*can_id & CAN_EFF_FLAG))
+ *mask &= (CAN_SFF_MASK | CAN_EFF_RTR_FLAGS);
/* reduce condition testing at receive time */
*can_id &= *mask;
if (!(*mask))
return &d->rx[RX_ALL];
- /* use extra filterset for the subscription of exactly *ONE* can_id */
- if (*can_id & CAN_EFF_FLAG) {
- if (*mask == (CAN_EFF_MASK | CAN_EFF_FLAG)) {
- /* RFC: a use-case for hash-tables in the future? */
- return &d->rx[RX_EFF];
+ /* extra filterlists for the subscription of a single non-RTR can_id */
+ if (((*mask & CAN_EFF_RTR_FLAGS) == CAN_EFF_RTR_FLAGS)
+ && !(*can_id & CAN_RTR_FLAG)) {
+
+ if (*can_id & CAN_EFF_FLAG) {
+ if (*mask == (CAN_EFF_MASK | CAN_EFF_RTR_FLAGS)) {
+ /* RFC: a future use-case for hash-tables? */
+ return &d->rx[RX_EFF];
+ }
+ } else {
+ if (*mask == (CAN_SFF_MASK | CAN_EFF_RTR_FLAGS))
+ return &d->rx_sff[*can_id];
}
- } else {
- if (*mask == CAN_SFF_MASK)
- return &d->rx_sff[*can_id];
}
/* default: filter via can_id/can_mask */
}
}
- /* check CAN_ID specific entries */
+ /* check filterlists for single non-RTR can_ids */
+ if (can_id & CAN_RTR_FLAG)
+ return matches;
+
if (can_id & CAN_EFF_FLAG) {
hlist_for_each_entry_rcu(r, n, &d->rx[RX_EFF], list) {
if (r->can_id == can_id) {
#define BCM_CAN_DLC_MASK 0x0F /* clean private flags in can_dlc by masking */
/* get best masking value for can_rx_register() for a given single can_id */
-#define REGMASK(id) ((id & CAN_RTR_FLAG) | ((id & CAN_EFF_FLAG) ? \
- (CAN_EFF_MASK | CAN_EFF_FLAG) : CAN_SFF_MASK))
+#define REGMASK(id) ((id & CAN_EFF_FLAG) ? \
+ (CAN_EFF_MASK | CAN_EFF_FLAG | CAN_RTR_FLAG) : \
+ (CAN_SFF_MASK | CAN_EFF_FLAG | CAN_RTR_FLAG))
-#define CAN_BCM_VERSION "20080415"
+#define CAN_BCM_VERSION CAN_VERSION
static __initdata const char banner[] = KERN_INFO
"can: broadcast manager protocol (rev " CAN_BCM_VERSION ")\n";
static void tcp_set_skb_tso_segs(struct sock *sk, struct sk_buff *skb,
unsigned int mss_now)
{
- if (skb->len <= mss_now || !sk_can_gso(sk) ||
- tcp_urg_mode(tcp_sk(sk))) {
+ if (skb->len <= mss_now || !sk_can_gso(sk)) {
/* Avoid the costly divide in the normal
* non-TSO case.
*/
/* Compute the current effective MSS, taking SACKs and IP options,
* and even PMTU discovery events into account.
- *
- * LARGESEND note: !tcp_urg_mode is overkill, only frames up to snd_up
- * cannot be large. However, taking into account rare use of URG, this
- * is not a big flaw.
*/
unsigned int tcp_current_mss(struct sock *sk, int large_allowed)
{
mss_now = tp->mss_cache;
- if (large_allowed && sk_can_gso(sk) && !tcp_urg_mode(tp))
+ if (large_allowed && sk_can_gso(sk))
doing_tso = 1;
if (dst) {
{
int tso_segs = tcp_skb_pcount(skb);
- if (!tso_segs ||
- (tso_segs > 1 && (tcp_skb_mss(skb) != mss_now ||
- tcp_urg_mode(tcp_sk(sk))))) {
+ if (!tso_segs || (tso_segs > 1 && tcp_skb_mss(skb) != mss_now)) {
tcp_set_skb_tso_segs(sk, skb, mss_now);
tso_segs = tcp_skb_pcount(skb);
}
* send_head. This happens as incoming acks open up the remote
* window for us.
*
+ * LARGESEND note: !tcp_urg_mode is overkill, only frames between
+ * snd_up-64k-mss .. snd_up cannot be large. However, taking into
+ * account rare use of URG, this is not a big flaw.
+ *
* Returns 1, if no segments are in flight and we have queued segments, but
* cannot send anything now because of SWS or another problem.
*/
}
limit = mss_now;
- if (tso_segs > 1)
+ if (tso_segs > 1 && !tcp_urg_mode(tp))
limit = tcp_mss_split_point(sk, skb, mss_now,
cwnd_quota);
*/
void tcp_push_one(struct sock *sk, unsigned int mss_now)
{
+ struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *skb = tcp_send_head(sk);
unsigned int tso_segs, cwnd_quota;
BUG_ON(!tso_segs);
limit = mss_now;
- if (tso_segs > 1)
+ if (tso_segs > 1 && !tcp_urg_mode(tp))
limit = tcp_mss_split_point(sk, skb, mss_now,
cwnd_quota);
tp->snd_cwnd = 2;
else if (tp->snd_cwnd > tp->snd_cwnd_clamp)
tp->snd_cwnd = tp->snd_cwnd_clamp;
+
+ tp->snd_ssthresh = tcp_current_ssthresh(sk);
}
/* Wipe the slate clean for the next RTT. */
sta = rcu_dereference(local->sta_hash[STA_HASH(addr)]);
while (sta) {
- if (compare_ether_addr(sta->sta.addr, addr) == 0)
+ if (memcmp(sta->sta.addr, addr, ETH_ALEN) == 0)
break;
sta = rcu_dereference(sta->hnext);
}
sk = nf_tproxy_get_sock_v4(dev_net(skb->dev), protocol,
saddr, daddr, sport, dport, par->in, false);
if (sk != NULL) {
- bool wildcard = (inet_sk(sk)->rcv_saddr == 0);
+ bool wildcard = (sk->sk_state != TCP_TIME_WAIT && inet_sk(sk)->rcv_saddr == 0);
nf_tproxy_put_sock(sk);
if (wildcard)
list_entry = netlbl_af4list_remove(addr->s_addr, mask->s_addr,
&iface->addr4_list);
spin_unlock(&netlbl_unlhsh_lock);
- if (list_entry == NULL)
+ if (list_entry != NULL)
+ entry = netlbl_unlhsh_addr4_entry(list_entry);
+ else
ret_val = -ENOENT;
- entry = netlbl_unlhsh_addr4_entry(list_entry);
audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL,
audit_info);
spin_lock(&netlbl_unlhsh_lock);
list_entry = netlbl_af6list_remove(addr, mask, &iface->addr6_list);
spin_unlock(&netlbl_unlhsh_lock);
- if (list_entry == NULL)
+ if (list_entry != NULL)
+ entry = netlbl_unlhsh_addr6_entry(list_entry);
+ else
ret_val = -ENOENT;
- entry = netlbl_unlhsh_addr6_entry(list_entry);
audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL,
audit_info);
static int getaddr_dumpit(struct sk_buff *skb, struct netlink_callback *cb)
{
+ struct net *net = sock_net(skb->sk);
struct phonet_device *pnd;
int dev_idx = 0, dev_start_idx = cb->args[0];
int addr_idx = 0, addr_start_idx = cb->args[1];
list_for_each_entry(pnd, &pndevs.list, list) {
u8 addr;
+ if (!net_eq(dev_net(pnd->netdev), net))
+ continue;
if (dev_idx > dev_start_idx)
addr_start_idx = 0;
if (dev_idx++ < dev_start_idx)
continue;
hlist_del(&pol->bydst);
hlist_del(&pol->byidx);
+ list_del(&pol->walk.all);
write_unlock_bh(&xfrm_policy_lock);
xfrm_audit_policy_delete(pol, 1, audit_info->loginuid,
projects / linux-2.6-omap-h63xx.git / commitdiff