]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
USB: usb-storage: merge DPCM support into SDDR09
authorAlan Stern <stern@rowland.harvard.edu>
Mon, 1 Dec 2008 15:36:15 +0000 (10:36 -0500)
committerGreg Kroah-Hartman <gregkh@suse.de>
Wed, 7 Jan 2009 18:00:06 +0000 (10:00 -0800)
The DPCM subdriver is a little peculiar, in that it's meant to support
devices where LUN 0 is Compact Flash and uses the CB transport whereas
LUN 1 is SmartMedia and uses the SDDR09 transport.  Thus DPCM isn't
really a transport in itself; it's more like a demultiplexer.

Much of the DPCM code is part of the SDDR09 subdriver already, and the
remaining part is fairly small.  This patch (as1182) moves that extra
piece into sddr09.c, thereby eliminating dpcm.c.  Also eliminated is
the Kconfig entry for DPCM support; it is now listed as part of the
SDDR09 entry.

In order to make sure that the semantics are the same as before, each
unusual_devs entry for DPCM is now present twice: once with DPCM
support if SDDR09 is configured (as before), and once with the
SINGLE_LUN flag and CB support otherwise.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/storage/Kconfig
drivers/usb/storage/Makefile
drivers/usb/storage/dpcm.c [deleted file]
drivers/usb/storage/dpcm.h [deleted file]
drivers/usb/storage/sddr09.c
drivers/usb/storage/sddr09.h
drivers/usb/storage/unusual_devs.h
drivers/usb/storage/usb.c

index c68b738900bdbb9b6c8f6c95d536a69d7cada937..9df6887b91f6bb7c157e878c7f87406a42609b93 100644 (file)
@@ -61,13 +61,6 @@ config USB_STORAGE_ISD200
          - CyQ've CQ8060A CDRW drive
          - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
 
-config USB_STORAGE_DPCM
-       bool "Microtech/ZiO! CompactFlash/SmartMedia support"
-       depends on USB_STORAGE
-       help
-         Say Y here to support the Microtech/ZiO! CompactFlash reader.
-         There is a web page at <http://www.ziocorp.com/products/>.
-
 config USB_STORAGE_USBAT
        bool "USBAT/USBAT02-based storage support"
        depends on USB_STORAGE
@@ -90,12 +83,12 @@ config USB_STORAGE_USBAT
          - Sandisk ImageMate SDDR-05b
 
 config USB_STORAGE_SDDR09
-       bool "SanDisk SDDR-09 (and other SmartMedia) support"
+       bool "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
        depends on USB_STORAGE
        help
          Say Y here to include additional code to support the Sandisk SDDR-09
          SmartMedia reader in the USB Mass Storage driver.
-         Also works for the Microtech Zio! SmartMedia reader.
+         Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
 
 config USB_STORAGE_SDDR55
        bool "SanDisk SDDR-55 SmartMedia support"
index 7f8beb5366aec91656787736c5c1b3f1fb0d0712..facf610f16838eae57e47fbd3e0755f3c12545f1 100644 (file)
@@ -14,7 +14,6 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_USBAT)   += shuttle_usbat.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR09)   += sddr09.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR55)   += sddr55.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_FREECOM)  += freecom.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_DPCM)     += dpcm.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200)   += isd200.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB)  += datafab.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o
diff --git a/drivers/usb/storage/dpcm.c b/drivers/usb/storage/dpcm.c
deleted file mode 100644 (file)
index 9399234..0000000
+++ /dev/null
@@ -1,86 +0,0 @@
-/* Driver for Microtech DPCM-USB CompactFlash/SmartMedia reader
- *
- * DPCM driver v0.1:
- *
- * First release
- *
- * Current development and maintenance by:
- *   (c) 2000 Brian Webb (webbb@earthlink.net)
- *
- * This device contains both a CompactFlash card reader, which
- * uses the Control/Bulk w/o Interrupt protocol and
- * a SmartMedia card reader that uses the same protocol
- * as the SDDR09.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-
-#include "usb.h"
-#include "transport.h"
-#include "protocol.h"
-#include "debug.h"
-#include "dpcm.h"
-#include "sddr09.h"
-
-/*
- * Transport for the Microtech DPCM-USB
- *
- */
-int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
-{
-       int ret;
-
-       if (srb == NULL)
-               return USB_STOR_TRANSPORT_ERROR;
-
-       US_DEBUGP("dpcm_transport: LUN=%d\n", srb->device->lun);
-
-       switch (srb->device->lun) {
-               case 0:
-
-                       /*
-                        * LUN 0 corresponds to the CompactFlash card reader.
-                        */
-                       ret = usb_stor_CB_transport(srb, us);
-                       break;
-
-#ifdef CONFIG_USB_STORAGE_SDDR09
-               case 1:
-
-                       /*
-                        * LUN 1 corresponds to the SmartMedia card reader.
-                        */
-
-                       /*
-                        * Set the LUN to 0 (just in case).
-                        */
-                       srb->device->lun = 0; us->srb->device->lun = 0;
-                       ret = sddr09_transport(srb, us);
-                       srb->device->lun = 1; us->srb->device->lun = 1;
-                       break;
-
-#endif
-
-               default:
-                       US_DEBUGP("dpcm_transport: Invalid LUN %d\n", srb->device->lun);
-                       ret = USB_STOR_TRANSPORT_ERROR;
-                       break;
-       }
-       return ret;
-}
diff --git a/drivers/usb/storage/dpcm.h b/drivers/usb/storage/dpcm.h
deleted file mode 100644 (file)
index e7b7b0f..0000000
+++ /dev/null
@@ -1,32 +0,0 @@
-/* Driver for Microtech DPCM-USB CompactFlash/SmartMedia reader
- *
- * DPCM driver v0.1:
- *
- * First release
- *
- * Current development and maintenance by:
- *   (c) 2000 Brian Webb (webbb@earthlink.net)
- *
- * See dpcm.c for more explanation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _MICROTECH_DPCM_USB_H
-#define _MICROTECH_DPCM_USB_H
-
-extern int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us);
-
-#endif
index c5a54b872c2426cae14927264558eb99f17987d6..531ae5c5abf3bf5d9d97abaac36c371ae82bb766 100644 (file)
@@ -45,6 +45,7 @@
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
 
 #include "usb.h"
 #include "transport.h"
@@ -1445,6 +1446,48 @@ usb_stor_sddr09_dpcm_init(struct us_data *us) {
        return 0;               /* not result */
 }
 
+/*
+ * Transport for the Microtech DPCM-USB
+ */
+int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+       int ret;
+
+       US_DEBUGP("dpcm_transport: LUN=%d\n", srb->device->lun);
+
+       switch (srb->device->lun) {
+       case 0:
+
+               /*
+                * LUN 0 corresponds to the CompactFlash card reader.
+                */
+               ret = usb_stor_CB_transport(srb, us);
+               break;
+
+       case 1:
+
+               /*
+                * LUN 1 corresponds to the SmartMedia card reader.
+                */
+
+               /*
+                * Set the LUN to 0 (just in case).
+                */
+               srb->device->lun = 0;
+               ret = sddr09_transport(srb, us);
+               srb->device->lun = 1;
+               break;
+
+       default:
+               US_DEBUGP("dpcm_transport: Invalid LUN %d\n",
+                               srb->device->lun);
+               ret = USB_STOR_TRANSPORT_ERROR;
+               break;
+       }
+       return ret;
+}
+
+
 /*
  * Transport for the Sandisk SDDR-09
  */
index e50033ad7b195be471c5a3ad5ad949018621dde2..b701172e12e302cce7a284272ec2aa4957fdf252 100644 (file)
 /* Sandisk SDDR-09 stuff */
 
 extern int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us);
+extern int usb_stor_sddr09_init(struct us_data *us);
+
+/* Microtech DPCM-USB stuff */
 
+extern int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us);
 extern int usb_stor_sddr09_dpcm_init(struct us_data *us);
-extern int usb_stor_sddr09_init(struct us_data *us);
 
 #endif
index 745809778310690d7753f0b69257889a4043edc3..0fd42a0c794f4e0a4df0f19862533715df93ba1f 100644 (file)
@@ -296,11 +296,17 @@ UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
                US_SC_DEVICE, US_PR_DEVICE, NULL,
                US_FL_SINGLE_LUN ),
 
-#ifdef CONFIG_USB_STORAGE_DPCM
+#ifdef CONFIG_USB_STORAGE_SDDR09
 UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
                "Microtech",
                "CameraMate (DPCM_USB)",
                US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
+#else
+UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
+               "Microtech",
+               "CameraMate",
+               US_SC_SCSI, US_PR_CB, NULL,
+               US_FL_SINGLE_LUN ),
 #endif
 
 /* Patch submitted by Daniel Drake <dsd@gentoo.org>
@@ -601,6 +607,12 @@ UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
                "eUSB SmartMedia / CompactFlash Adapter",
                US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
                0),
+#else
+UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
+               "SCM Microsystems",
+               "eUSB CompactFlash Adapter",
+               US_SC_SCSI, US_PR_CB, NULL,
+               US_FL_SINGLE_LUN),
 #endif
 
 /* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */
@@ -1175,11 +1187,17 @@ UNUSUAL_DEV(  0x07af, 0x0005, 0x0100, 0x0100,
                US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
                US_FL_SCM_MULT_TARG ),
 
-#ifdef CONFIG_USB_STORAGE_DPCM
+#ifdef CONFIG_USB_STORAGE_SDDR09
 UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
                "Microtech",
                "CameraMate (DPCM_USB)",
                US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
+#else
+UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
+               "Microtech",
+               "CameraMate",
+               US_SC_SCSI, US_PR_CB, NULL,
+               US_FL_SINGLE_LUN ),
 #endif
 
 #ifdef CONFIG_USB_STORAGE_ALAUDA
index 06c735703f4a4246b94b3312fef2a5d0351e3bf2..b25c448d5eb72c6715a442e70c1f77cbb5da47c1 100644 (file)
@@ -75,9 +75,6 @@
 #ifdef CONFIG_USB_STORAGE_SDDR55
 #include "sddr55.h"
 #endif
-#ifdef CONFIG_USB_STORAGE_DPCM
-#include "dpcm.h"
-#endif
 #ifdef CONFIG_USB_STORAGE_FREECOM
 #include "freecom.h"
 #endif