That cast was annyoing for quite a while. Now
omap_ctrl_base_get() returns void __iomem *
and __raw_read/write friends uses void __iomem *
so there's no need for casting.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
/* 3430ES2.0 doesn't have msecure/gpio-22 line connected to T2 */
if (omap_type() == OMAP2_DEVICE_TYPE_GP &&
system_rev < OMAP3430_REV_ES2_0) {
/* 3430ES2.0 doesn't have msecure/gpio-22 line connected to T2 */
if (omap_type() == OMAP2_DEVICE_TYPE_GP &&
system_rev < OMAP3430_REV_ES2_0) {
- u32 msecure_pad_config_reg = omap_ctrl_base_get() + 0xA3C;
+ void __iomem *msecure_pad_config_reg = omap_ctrl_base_get() +
+ 0xA3C;
int mux_mask = 0x04;
u16 tmp;
int mux_mask = 0x04;
u16 tmp;
* is low. Make msecure line high in order to change the
* TWL4030 RTC time and calender registers.
*/
* is low. Make msecure line high in order to change the
* TWL4030 RTC time and calender registers.
*/
- tmp = omap_readw(msecure_pad_config_reg);
+ tmp = __raw_readw(msecure_pad_config_reg);
tmp &= 0xF8; /* To enable mux mode 03/04 = GPIO_RTC */
tmp |= mux_mask;/* To enable mux mode 03/04 = GPIO_RTC */
tmp &= 0xF8; /* To enable mux mode 03/04 = GPIO_RTC */
tmp |= mux_mask;/* To enable mux mode 03/04 = GPIO_RTC */
- omap_writew(tmp, msecure_pad_config_reg);
+ __raw_writew(tmp, msecure_pad_config_reg);
gpio_direction_output(TWL4030_MSECURE_GPIO, 1);
}
gpio_direction_output(TWL4030_MSECURE_GPIO, 1);
}