]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
sh: ap325rxa: create CPLD data area in mtd
authorNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Wed, 24 Sep 2008 02:46:48 +0000 (11:46 +0900)
committerPaul Mundt <lethal@linux-sh.org>
Wed, 24 Sep 2008 04:57:42 +0000 (13:57 +0900)
AP320 and AP325RXA has CPLD data in NOR Flash.
If this area erased, this board can not boot.
This patch create CPLD data area and set writeable mask bit.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
arch/sh/boards/board-ap325rxa.c

index fd1612590bf4feb96e7d9e714da12203cf300ac5..00e632fc0688ec63be754a22983276b0f3059043 100644 (file)
@@ -52,20 +52,33 @@ static struct platform_device smc9118_device = {
        },
 };
 
+/*
+ * AP320 and AP325RXA has CPLD data in NOR Flash(0xA80000-0xABFFFF).
+ * If this area erased, this board can not boot.
+ */
 static struct mtd_partition ap325rxa_nor_flash_partitions[] = {
        {
-                .name = "uboot",
-                .offset = 0,
-                .size = (1 * 1024 * 1024),
-                .mask_flags = MTD_WRITEABLE,   /* Read-only */
+               .name = "uboot",
+               .offset = 0,
+               .size = (1 * 1024 * 1024),
+               .mask_flags = MTD_WRITEABLE,    /* Read-only */
+       }, {
+               .name = "kernel",
+               .offset = MTDPART_OFS_APPEND,
+               .size = (2 * 1024 * 1024),
+       }, {
+               .name = "free-area0",
+               .offset = MTDPART_OFS_APPEND,
+               .size = ((7 * 1024 * 1024) + (512 * 1024)),
        }, {
-                .name = "kernel",
-                .offset = MTDPART_OFS_APPEND,
-                .size = (2 * 1024 * 1024),
+               .name = "CPLD-Data",
+               .offset = MTDPART_OFS_APPEND,
+               .mask_flags = MTD_WRITEABLE,    /* Read-only */
+               .size = (1024 * 128 * 2),
        }, {
-                .name = "other",
-                .offset = MTDPART_OFS_APPEND,
-                .size = MTDPART_SIZ_FULL,
+               .name = "free-area1",
+               .offset = MTDPART_OFS_APPEND,
+               .size = MTDPART_SIZ_FULL,
        },
 };