]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
ahci: work around ATI SB600 h/w quirk
authorJeff Garzik <jeff@garzik.org>
Thu, 28 Feb 2008 20:43:48 +0000 (15:43 -0500)
committerJeff Garzik <jeff@garzik.org>
Wed, 5 Mar 2008 12:53:06 +0000 (07:53 -0500)
This addresses the recent ATI SB600 errata, where the hardware does
not like 256-length PRD entries during FPDMA (aka NCQ).

It hurts performance on SB600, but it is more important to get a
correct patch eliminating the data corruption/lockups, and then later
on tune for performance.

We simply limit each command to a maximum of 255 sectors, on SB600.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
drivers/ata/ahci.c

index 1db93b6190744015e251c5d428b58a762cf3c39a..8a49835bd0f85b141b53507e73b78cab945ef6ff 100644 (file)
@@ -186,6 +186,7 @@ enum {
        AHCI_HFLAG_NO_MSI               = (1 << 5), /* no PCI MSI */
        AHCI_HFLAG_NO_PMP               = (1 << 6), /* no PMP */
        AHCI_HFLAG_NO_HOTPLUG           = (1 << 7), /* ignore PxSERR.DIAG.N */
+       AHCI_HFLAG_SECT255              = (1 << 8), /* max 255 sectors */
 
        /* ap->flags bits */
 
@@ -255,6 +256,7 @@ static void ahci_vt8251_error_handler(struct ata_port *ap);
 static void ahci_p5wdh_error_handler(struct ata_port *ap);
 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
 static int ahci_port_resume(struct ata_port *ap);
+static void ahci_dev_config(struct ata_device *dev);
 static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl);
 static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
                               u32 opts);
@@ -294,6 +296,8 @@ static const struct ata_port_operations ahci_ops = {
        .check_altstatus        = ahci_check_status,
        .dev_select             = ata_noop_dev_select,
 
+       .dev_config             = ahci_dev_config,
+
        .tf_read                = ahci_tf_read,
 
        .qc_defer               = sata_pmp_qc_defer_cmd_switch,
@@ -425,7 +429,7 @@ static const struct ata_port_info ahci_port_info[] = {
        /* board_ahci_sb600 */
        {
                AHCI_HFLAGS     (AHCI_HFLAG_IGN_SERR_INTERNAL |
-                                AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_PMP),
+                                AHCI_HFLAG_SECT255 | AHCI_HFLAG_NO_PMP),
                .flags          = AHCI_FLAG_COMMON,
                .link_flags     = AHCI_LFLAG_COMMON,
                .pio_mask       = 0x1f, /* pio0-4 */
@@ -1176,6 +1180,14 @@ static void ahci_init_controller(struct ata_host *host)
        VPRINTK("HOST_CTL 0x%x\n", tmp);
 }
 
+static void ahci_dev_config(struct ata_device *dev)
+{
+       struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
+
+       if (hpriv->flags & AHCI_HFLAG_SECT255)
+               dev->max_sectors = 255;
+}
+
 static unsigned int ahci_dev_classify(struct ata_port *ap)
 {
        void __iomem *port_mmio = ahci_port_base(ap);