Blackfin arch: move most dma functions into static inlines

move most dma functions into static inlines since they are vastly 1
liners that get/set a value in a structure

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h
index 4928e7aa480189c1262b503357d2a8b5a73efb6e..690c25f5f9928824638a8d7561350cdb44ea5887 100644 (file)
--- a/arch/blackfin/include/asm/dma.h
+++ b/arch/blackfin/include/asm/dma.h
@@ -129,50 +129,126 @@ void blackfin_dma_resume(void);
 /*******************************************************************************
 *      DMA API's
 *******************************************************************************/
-/* functions to set register mode */
-void set_dma_start_addr(unsigned int channel, unsigned long addr);
-void set_dma_next_desc_addr(unsigned int channel, unsigned long addr);
-void set_dma_curr_desc_addr(unsigned int channel, unsigned long addr);
-void set_dma_x_count(unsigned int channel, unsigned short x_count);
-void set_dma_x_modify(unsigned int channel, short x_modify);
-void set_dma_y_count(unsigned int channel, unsigned short y_count);
-void set_dma_y_modify(unsigned int channel, short y_modify);
-void set_dma_config(unsigned int channel, unsigned short config);
-unsigned short set_bfin_dma_config(char direction, char flow_mode,
-                                  char intr_mode, char dma_mode, char width,
-                                  char syncmode);
-void set_dma_curr_addr(unsigned int channel, unsigned long addr);
-
-/* get curr status for polling */
-unsigned short get_dma_curr_irqstat(unsigned int channel);
-unsigned short get_dma_curr_xcount(unsigned int channel);
-unsigned short get_dma_curr_ycount(unsigned int channel);
-unsigned long get_dma_next_desc_ptr(unsigned int channel);
-unsigned long get_dma_curr_desc_ptr(unsigned int channel);
-unsigned long get_dma_curr_addr(unsigned int channel);
-
-/* set large DMA mode descriptor */
-void set_dma_sg(unsigned int channel, struct dmasg *sg, int nr_sg);
-
-/* check if current channel is in use */
-int dma_channel_active(unsigned int channel);
-
-/* common functions must be called in any mode */
+extern struct dma_channel dma_ch[MAX_DMA_CHANNELS];
+extern struct dma_register *dma_io_base_addr[MAX_DMA_CHANNELS];
+extern int channel2irq(unsigned int channel);
+
+static inline void set_dma_start_addr(unsigned int channel, unsigned long addr)
+{
+       dma_ch[channel].regs->start_addr = addr;
+}
+static inline void set_dma_next_desc_addr(unsigned int channel, unsigned long addr)
+{
+       dma_ch[channel].regs->next_desc_ptr = addr;
+}
+static inline void set_dma_curr_desc_addr(unsigned int channel, unsigned long addr)
+{
+       dma_ch[channel].regs->curr_desc_ptr = addr;
+}
+static inline void set_dma_x_count(unsigned int channel, unsigned short x_count)
+{
+       dma_ch[channel].regs->x_count = x_count;
+}
+static inline void set_dma_y_count(unsigned int channel, unsigned short y_count)
+{
+       dma_ch[channel].regs->y_count = y_count;
+}
+static inline void set_dma_x_modify(unsigned int channel, short x_modify)
+{
+       dma_ch[channel].regs->x_modify = x_modify;
+}
+static inline void set_dma_y_modify(unsigned int channel, short y_modify)
+{
+       dma_ch[channel].regs->y_modify = y_modify;
+}
+static inline void set_dma_config(unsigned int channel, unsigned short config)
+{
+       dma_ch[channel].regs->cfg = config;
+}
+static inline void set_dma_curr_addr(unsigned int channel, unsigned long addr)
+{
+       dma_ch[channel].regs->curr_addr_ptr = addr;
+}
+
+static inline unsigned short
+set_bfin_dma_config(char direction, char flow_mode,
+                   char intr_mode, char dma_mode, char width, char syncmode)
+{
+       return (direction << 1) | (width << 2) | (dma_mode << 4) |
+               (intr_mode << 6) | (flow_mode << 12) | (syncmode << 5);
+}
+
+static inline unsigned short get_dma_curr_irqstat(unsigned int channel)
+{
+       return dma_ch[channel].regs->irq_status;
+}
+static inline unsigned short get_dma_curr_xcount(unsigned int channel)
+{
+       return dma_ch[channel].regs->curr_x_count;
+}
+static inline unsigned short get_dma_curr_ycount(unsigned int channel)
+{
+       return dma_ch[channel].regs->curr_y_count;
+}
+static inline unsigned long get_dma_next_desc_ptr(unsigned int channel)
+{
+       return dma_ch[channel].regs->next_desc_ptr;
+}
+static inline unsigned long get_dma_curr_desc_ptr(unsigned int channel)
+{
+       return dma_ch[channel].regs->curr_desc_ptr;
+}
+static inline unsigned long get_dma_curr_addr(unsigned int channel)
+{
+       return dma_ch[channel].regs->curr_addr_ptr;
+}
+
+static inline void set_dma_sg(unsigned int channel, struct dmasg *sg, int ndsize)
+{
+       dma_ch[channel].regs->cfg |= ((ndsize & 0x0F) << 8);
+       dma_ch[channel].regs->next_desc_ptr = (unsigned long)sg;
+}
+
+static inline int dma_channel_active(unsigned int channel)
+{
+       if (dma_ch[channel].chan_status == DMA_CHANNEL_FREE)
+               return 0;
+       else
+               return 1;
+}
+
+static inline void disable_dma(unsigned int channel)
+{
+       dma_ch[channel].regs->cfg &= ~DMAEN;
+       SSYNC();
+       dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED;
+}
+static inline void enable_dma(unsigned int channel)
+{
+       dma_ch[channel].regs->curr_x_count = 0;
+       dma_ch[channel].regs->curr_y_count = 0;
+       dma_ch[channel].regs->cfg |= DMAEN;
+       dma_ch[channel].chan_status = DMA_CHANNEL_ENABLED;
+}
 void free_dma(unsigned int channel);
-int dma_channel_active(unsigned int channel); /* check if a channel is in use */
-void disable_dma(unsigned int channel);
-void enable_dma(unsigned int channel);
 int request_dma(unsigned int channel, const char *device_id);
-int set_dma_callback(unsigned int channel, irq_handler_t callback,
-                    void *data);
-void dma_disable_irq(unsigned int channel);
-void dma_enable_irq(unsigned int channel);
-void clear_dma_irqstat(unsigned int channel);
+int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data);
+
+static inline void dma_disable_irq(unsigned int channel)
+{
+       disable_irq(dma_ch[channel].irq);
+}
+static inline void dma_enable_irq(unsigned int channel)
+{
+       enable_irq(dma_ch[channel].irq);
+}
+static inline void clear_dma_irqstat(unsigned int channel)
+{
+       dma_ch[channel].regs->irq_status = DMA_DONE | DMA_ERR;
+}
+
 void *dma_memcpy(void *dest, const void *src, size_t count);
 void *safe_dma_memcpy(void *dest, const void *src, size_t count);
 void blackfin_dma_early_init(void);
 
-extern int channel2irq(unsigned int channel);
-extern struct dma_register *dma_io_base_addr[MAX_DMA_CHANNELS];
-
 #endif

diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index ed7d2859a626d07ae47c7008e717eb1857f6a671..917b5b8e32c8ad432d99b810e62b977c78f5c747 100644 (file)
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -1,7 +1,7 @@
 /*
  * bfin_dma_5xx.c - Blackfin DMA implementation
  *
- * Copyright 2004-2006 Analog Devices Inc.
+ * Copyright 2004-2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -20,22 +20,8 @@
 #include <asm/dma.h>
 #include <asm/uaccess.h>
 
-/**************************************************************************
- * Global Variables
-***************************************************************************/
-
-static struct dma_channel dma_ch[MAX_DMA_CHANNELS];
-
-/*------------------------------------------------------------------------------
- *       Set the Buffer Clear bit in the Configuration register of specific DMA
- *       channel. This will stop the descriptor based DMA operation.
- *-----------------------------------------------------------------------------*/
-static void clear_dma_buffer(unsigned int channel)
-{
-       dma_ch[channel].regs->cfg |= RESTART;
-       SSYNC();
-       dma_ch[channel].regs->cfg &= ~RESTART;
-}
+struct dma_channel dma_ch[MAX_DMA_CHANNELS];
+EXPORT_SYMBOL(dma_ch);
 
 static int __init blackfin_dma_init(void)
 {
@@ -92,9 +78,11 @@ static int __init proc_dma_init(void)
 late_initcall(proc_dma_init);
 #endif
 
-/*------------------------------------------------------------------------------
- *     Request the specific DMA channel from the system.
- *-----------------------------------------------------------------------------*/
+/**
+ *     request_dma - request a DMA channel
+ *
+ * Request the specific DMA channel from the system if it's available.
+ */
 int request_dma(unsigned int channel, const char *device_id)
 {
        pr_debug("request_dma() : BEGIN \n");
@@ -172,6 +160,19 @@ int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data)
 }
 EXPORT_SYMBOL(set_dma_callback);
 
+/**
+ *     clear_dma_buffer - clear DMA fifos for specified channel
+ *
+ * Set the Buffer Clear bit in the Configuration register of specific DMA
+ * channel. This will stop the descriptor based DMA operation.
+ */
+static void clear_dma_buffer(unsigned int channel)
+{
+       dma_ch[channel].regs->cfg |= RESTART;
+       SSYNC();
+       dma_ch[channel].regs->cfg &= ~RESTART;
+}
+
 void free_dma(unsigned int channel)
 {
        pr_debug("freedma() : BEGIN \n");
@@ -194,198 +195,6 @@ void free_dma(unsigned int channel)
 }
 EXPORT_SYMBOL(free_dma);
 
-void dma_enable_irq(unsigned int channel)
-{
-       pr_debug("dma_enable_irq() : BEGIN \n");
-       enable_irq(dma_ch[channel].irq);
-}
-EXPORT_SYMBOL(dma_enable_irq);
-
-void dma_disable_irq(unsigned int channel)
-{
-       pr_debug("dma_disable_irq() : BEGIN \n");
-       disable_irq(dma_ch[channel].irq);
-}
-EXPORT_SYMBOL(dma_disable_irq);
-
-int dma_channel_active(unsigned int channel)
-{
-       if (dma_ch[channel].chan_status == DMA_CHANNEL_FREE) {
-               return 0;
-       } else {
-               return 1;
-       }
-}
-EXPORT_SYMBOL(dma_channel_active);
-
-/*------------------------------------------------------------------------------
-*      stop the specific DMA channel.
-*-----------------------------------------------------------------------------*/
-void disable_dma(unsigned int channel)
-{
-       pr_debug("stop_dma() : BEGIN \n");
-       dma_ch[channel].regs->cfg &= ~DMAEN;    /* Clean the enable bit */
-       SSYNC();
-       dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED;
-       /* Needs to be enabled Later */
-       pr_debug("stop_dma() : END \n");
-       return;
-}
-EXPORT_SYMBOL(disable_dma);
-
-void enable_dma(unsigned int channel)
-{
-       pr_debug("enable_dma() : BEGIN \n");
-       dma_ch[channel].chan_status = DMA_CHANNEL_ENABLED;
-       dma_ch[channel].regs->curr_x_count = 0;
-       dma_ch[channel].regs->curr_y_count = 0;
-
-       dma_ch[channel].regs->cfg |= DMAEN;     /* Set the enable bit */
-       pr_debug("enable_dma() : END \n");
-       return;
-}
-EXPORT_SYMBOL(enable_dma);
-
-/*------------------------------------------------------------------------------
-*              Set the Start Address register for the specific DMA channel
-*              This function can be used for register based DMA,
-*              to setup the start address
-*              addr:           Starting address of the DMA Data to be transferred.
-*-----------------------------------------------------------------------------*/
-void set_dma_start_addr(unsigned int channel, unsigned long addr)
-{
-       pr_debug("set_dma_start_addr() : BEGIN \n");
-       dma_ch[channel].regs->start_addr = addr;
-       pr_debug("set_dma_start_addr() : END\n");
-}
-EXPORT_SYMBOL(set_dma_start_addr);
-
-void set_dma_next_desc_addr(unsigned int channel, unsigned long addr)
-{
-       pr_debug("set_dma_next_desc_addr() : BEGIN \n");
-       dma_ch[channel].regs->next_desc_ptr = addr;
-       pr_debug("set_dma_next_desc_addr() : END\n");
-}
-EXPORT_SYMBOL(set_dma_next_desc_addr);
-
-void set_dma_curr_desc_addr(unsigned int channel, unsigned long addr)
-{
-       pr_debug("set_dma_curr_desc_addr() : BEGIN \n");
-       dma_ch[channel].regs->curr_desc_ptr = addr;
-       pr_debug("set_dma_curr_desc_addr() : END\n");
-}
-EXPORT_SYMBOL(set_dma_curr_desc_addr);
-
-void set_dma_x_count(unsigned int channel, unsigned short x_count)
-{
-       dma_ch[channel].regs->x_count = x_count;
-}
-EXPORT_SYMBOL(set_dma_x_count);
-
-void set_dma_y_count(unsigned int channel, unsigned short y_count)
-{
-       dma_ch[channel].regs->y_count = y_count;
-}
-EXPORT_SYMBOL(set_dma_y_count);
-
-void set_dma_x_modify(unsigned int channel, short x_modify)
-{
-       dma_ch[channel].regs->x_modify = x_modify;
-}
-EXPORT_SYMBOL(set_dma_x_modify);
-
-void set_dma_y_modify(unsigned int channel, short y_modify)
-{
-       dma_ch[channel].regs->y_modify = y_modify;
-}
-EXPORT_SYMBOL(set_dma_y_modify);
-
-void set_dma_config(unsigned int channel, unsigned short config)
-{
-       dma_ch[channel].regs->cfg = config;
-}
-EXPORT_SYMBOL(set_dma_config);
-
-unsigned short
-set_bfin_dma_config(char direction, char flow_mode,
-                   char intr_mode, char dma_mode, char width, char syncmode)
-{
-       unsigned short config;
-
-       config =
-           ((direction << 1) | (width << 2) | (dma_mode << 4) |
-            (intr_mode << 6) | (flow_mode << 12) | (syncmode << 5));
-       return config;
-}
-EXPORT_SYMBOL(set_bfin_dma_config);
-
-void set_dma_sg(unsigned int channel, struct dmasg *sg, int nr_sg)
-{
-       dma_ch[channel].regs->cfg |= ((nr_sg & 0x0F) << 8);
-       dma_ch[channel].regs->next_desc_ptr = (unsigned int)sg;
-}
-EXPORT_SYMBOL(set_dma_sg);
-
-void set_dma_curr_addr(unsigned int channel, unsigned long addr)
-{
-       dma_ch[channel].regs->curr_addr_ptr = addr;
-}
-EXPORT_SYMBOL(set_dma_curr_addr);
-
-/*------------------------------------------------------------------------------
- *     Get the DMA status of a specific DMA channel from the system.
- *-----------------------------------------------------------------------------*/
-unsigned short get_dma_curr_irqstat(unsigned int channel)
-{
-       return dma_ch[channel].regs->irq_status;
-}
-EXPORT_SYMBOL(get_dma_curr_irqstat);
-
-/*------------------------------------------------------------------------------
- *     Clear the DMA_DONE bit in DMA status. Stop the DMA completion interrupt.
- *-----------------------------------------------------------------------------*/
-void clear_dma_irqstat(unsigned int channel)
-{
-       dma_ch[channel].regs->irq_status |= 3;
-}
-EXPORT_SYMBOL(clear_dma_irqstat);
-
-/*------------------------------------------------------------------------------
- *     Get current DMA xcount of a specific DMA channel from the system.
- *-----------------------------------------------------------------------------*/
-unsigned short get_dma_curr_xcount(unsigned int channel)
-{
-       return dma_ch[channel].regs->curr_x_count;
-}
-EXPORT_SYMBOL(get_dma_curr_xcount);
-
-/*------------------------------------------------------------------------------
- *     Get current DMA ycount of a specific DMA channel from the system.
- *-----------------------------------------------------------------------------*/
-unsigned short get_dma_curr_ycount(unsigned int channel)
-{
-       return dma_ch[channel].regs->curr_y_count;
-}
-EXPORT_SYMBOL(get_dma_curr_ycount);
-
-unsigned long get_dma_next_desc_ptr(unsigned int channel)
-{
-       return dma_ch[channel].regs->next_desc_ptr;
-}
-EXPORT_SYMBOL(get_dma_next_desc_ptr);
-
-unsigned long get_dma_curr_desc_ptr(unsigned int channel)
-{
-       return dma_ch[channel].regs->curr_desc_ptr;
-}
-EXPORT_SYMBOL(get_dma_curr_desc_ptr);
-
-unsigned long get_dma_curr_addr(unsigned int channel)
-{
-       return dma_ch[channel].regs->curr_addr_ptr;
-}
-EXPORT_SYMBOL(get_dma_curr_addr);
-
 #ifdef CONFIG_PM
 # ifndef MAX_DMA_SUSPEND_CHANNELS
 #  define MAX_DMA_SUSPEND_CHANNELS MAX_DMA_CHANNELS