]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] e1000: Fix TSO
authorJeff Kirsher <jeffrey.t.kirsher@intel.com>
Fri, 13 Jan 2006 00:50:23 +0000 (16:50 -0800)
committerJeff Garzik <jgarzik@pobox.com>
Tue, 17 Jan 2006 12:40:10 +0000 (07:40 -0500)
Fixed the TSO workaround for 82571/2 controllers.
Fixed TSO issue where a non-tso packet in a linear SKB which followed a TSO packet would get written back prematurely.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
drivers/net/e1000/e1000_main.c

index 4b44bcd0f958238ed66478af1c120c6f209f8312..4945a41e3aea83dcd68317a896f10b265b0dd86c 100644 (file)
@@ -2688,11 +2688,23 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
         * overrun the FIFO, adjust the max buffer len if mss
         * drops. */
        if(mss) {
+               uint8_t hdr_len;
                max_per_txd = min(mss << 2, max_per_txd);
                max_txd_pwr = fls(max_per_txd) - 1;
+
+       /* TSO Workaround for 82571/2 Controllers -- if skb->data
+        * points to just header, pull a few bytes of payload from
+        * frags into skb->data */
+               hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2));
+               if (skb->data_len && (hdr_len == (skb->len - skb->data_len)) &&
+                       (adapter->hw.mac_type == e1000_82571 ||
+                       adapter->hw.mac_type == e1000_82572)) {
+                       len = skb->len - skb->data_len;
+               }
        }
 
        if((mss) || (skb->ip_summed == CHECKSUM_HW))
+       /* reserve a descriptor for the offload context */
                count++;
        count++;
 #else
@@ -2726,26 +2738,13 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
        if(adapter->pcix_82544)
                count += nr_frags;
 
-#ifdef NETIF_F_TSO
-       /* TSO Workaround for 82571/2 Controllers -- if skb->data
-        * points to just header, pull a few bytes of payload from 
-        * frags into skb->data */
-       if (skb_shinfo(skb)->tso_size) {
-               uint8_t hdr_len;
-               hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2));
-               if (skb->data_len && (hdr_len < (skb->len - skb->data_len)) && 
-                       (adapter->hw.mac_type == e1000_82571 ||
-                       adapter->hw.mac_type == e1000_82572)) {
-                       unsigned int pull_size;
-                       pull_size = min((unsigned int)4, skb->data_len);
-                       if (!__pskb_pull_tail(skb, pull_size)) {
-                               printk(KERN_ERR "__pskb_pull_tail failed.\n");
-                               dev_kfree_skb_any(skb);
-                               return -EFAULT;
-                       }
+               unsigned int pull_size;
+               pull_size = min((unsigned int)4, skb->data_len);
+               if (!__pskb_pull_tail(skb, pull_size)) {
+                       printk(KERN_ERR "__pskb_pull_tail failed.\n");
+                       dev_kfree_skb_any(skb);
+                       return -EFAULT;
                }
-       }
-#endif
 
        if(adapter->hw.tx_pkt_filtering && (adapter->hw.mac_type == e1000_82573) )
                e1000_transfer_dhcp_info(adapter, skb);