#include "wbhal_f.h"
#include "wblinux_f.h"
-unsigned char
-WBLINUX_Initial(struct wbsoft_priv * adapter)
-{
- spin_lock_init( &adapter->SpinLock );
- return true;
-}
-
-void
-WBLINUX_Destroy(struct wbsoft_priv * adapter)
-{
- WBLINUX_stop( adapter );
-#ifdef _PE_USB_INI_DUMP_
- WBDEBUG(("[w35und] unregister_netdev!\n"));
-#endif
-}
-
void
WBLINUX_stop( struct wbsoft_priv * adapter )
{
atomic_dec(&adapter->ThreadCount);
}
-
-void
-WbWlanHalt( struct wbsoft_priv * adapter )
-{
- //---------------------
- adapter->sLocalPara.ShutDowned = true;
-
- Mds_Destroy(adapter);
-
- // Turn off Rx and Tx hardware ability
- hal_stop(&adapter->sHwData);
-#ifdef _PE_USB_INI_DUMP_
- WBDEBUG(("[w35und] Hal_stop O.K.\n"));
-#endif
- msleep(100);// Waiting Irp completed
-
- // Destroy the NDIS module
- WBLINUX_Destroy(adapter);
-
- // Halt the HAL
- hal_halt(&adapter->sHwData, NULL);
-}
-
-unsigned char
-WbWLanInitialize(struct ieee80211_hw *hw)
-{
- struct wbsoft_priv *priv = hw->priv;
- phw_data_t pHwData;
- u8 *pMacAddr;
- u8 *pMacAddr2;
- u32 InitStep = 0;
- u8 EEPROM_region;
- u8 HwRadioOff;
-
- //
- // Setting default value for Linux
- //
- priv->sLocalPara.region_INF = REGION_AUTO;
- priv->sLocalPara.TxRateMode = RATE_AUTO;
- priv->sLocalPara.bMacOperationMode = MODE_802_11_BG; // B/G mode
- priv->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
- priv->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
- hal_set_phy_type( &priv->sHwData, RF_WB_242_1 );
- priv->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
- priv->sLocalPara.bPreambleMode = AUTO_MODE;
- priv->sLocalPara.RadioOffStatus.boSwRadioOff = false;
- pHwData = &priv->sHwData;
- hal_set_phy_type( pHwData, RF_DECIDE_BY_INF );
-
- //
- // Initial each module and variable
- //
- if (!WBLINUX_Initial(priv)) {
-#ifdef _PE_USB_INI_DUMP_
- WBDEBUG(("[w35und]WBNDIS initialization failed\n"));
-#endif
- goto error;
- }
-
- // Initial Software variable
- priv->sLocalPara.ShutDowned = false;
-
- //added by ws for wep key error detection
- priv->sLocalPara.bWepKeyError= false;
- priv->sLocalPara.bToSelfPacketReceived = false;
- priv->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds
-
- // Initial USB hal
- InitStep = 1;
- pHwData = &priv->sHwData;
- if (!hal_init_hardware(hw))
- goto error;
-
- EEPROM_region = hal_get_region_from_EEPROM( pHwData );
- if (EEPROM_region != REGION_AUTO)
- priv->sLocalPara.region = EEPROM_region;
- else {
- if (priv->sLocalPara.region_INF != REGION_AUTO)
- priv->sLocalPara.region = priv->sLocalPara.region_INF;
- else
- priv->sLocalPara.region = REGION_USA; //default setting
- }
-
- // Get Software setting flag from hal
- priv->sLocalPara.boAntennaDiversity = false;
- if (hal_software_set(pHwData) & 0x00000001)
- priv->sLocalPara.boAntennaDiversity = true;
-
- //
- // For TS module
- //
- InitStep = 2;
-
- // For MDS module
- InitStep = 3;
- Mds_initial(priv);
-
- //=======================================
- // Initialize the SME, SCAN, MLME, ROAM
- //=======================================
- InitStep = 4;
- InitStep = 5;
- InitStep = 6;
-
- // If no user-defined address in the registry, use the addresss "burned" on the NIC instead.
- pMacAddr = priv->sLocalPara.ThisMacAddress;
- pMacAddr2 = priv->sLocalPara.PermanentAddress;
- hal_get_permanent_address( pHwData, priv->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM
- if (memcmp(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH) == 0)
- memcpy(pMacAddr, pMacAddr2, MAC_ADDR_LENGTH);
- else {
- // Set the user define MAC address
- hal_set_ethernet_address(pHwData, priv->sLocalPara.ThisMacAddress);
- }
-
- //get current antenna
- priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData);
-#ifdef _PE_STATE_DUMP_
- WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo));
-#endif
- hal_get_hw_radio_off( pHwData );
-
- // Waiting for HAL setting OK
- while (!hal_idle(pHwData))
- msleep(10);
-
- MTO_Init(priv);
-
- HwRadioOff = hal_get_hw_radio_off( pHwData );
- priv->sLocalPara.RadioOffStatus.boHwRadioOff = !!HwRadioOff;
-
- hal_set_radio_mode( pHwData, (unsigned char)(priv->sLocalPara.RadioOffStatus.boSwRadioOff || priv->sLocalPara.RadioOffStatus.boHwRadioOff) );
-
- hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now.
- //set a tx power for reference.....
-// sme_set_tx_power_level(priv, 12); FIXME?
- return true;
-
-error:
- switch (InitStep) {
- case 5:
- case 4:
- case 3: Mds_Destroy( priv );
- case 2:
- case 1: WBLINUX_Destroy( priv );
- hal_halt( pHwData, NULL );
- case 0: break;
- }
-
- return false;
-}
//
// wblinux_f.h
//
-unsigned char WBLINUX_Initial( struct wbsoft_priv *adapter );
int wb35_start_xmit(struct sk_buff *skb, struct net_device *netdev );
void WBLINUX_stop( struct wbsoft_priv *adapter );
-void WBLINUX_Destroy( struct wbsoft_priv *adapter );
void wb35_set_multicast( struct net_device *netdev );
struct net_device_stats * wb35_netdev_stats( struct net_device *netdev );
void WBLINUX_stop( struct wbsoft_priv *adapter );
-void WbWlanHalt( struct wbsoft_priv *adapter );
-unsigned char WbWLanInitialize(struct ieee80211_hw *hw);
-
#endif
#include <linux/usb.h>
#include "core.h"
+#include "mds_f.h"
#include "mlmetxrx_f.h"
+#include "mto_f.h"
#include "wbhal_f.h"
#include "wblinux_f.h"
static const struct ieee80211_ops wbsoft_ops = {
.tx = wbsoft_tx,
- .start = wbsoft_start, /* Start can be pretty much empty as we do WbWLanInitialize() during probe? */
+ .start = wbsoft_start, /* Start can be pretty much empty as we do wb35_hw_init() during probe? */
.stop = wbsoft_stop,
.add_interface = wbsoft_add_interface,
.remove_interface = wbsoft_remove_interface,
// conf_tx: hal_set_cwmin()/hal_set_cwmax;
};
+static unsigned char wb35_hw_init(struct ieee80211_hw *hw)
+{
+ struct wbsoft_priv *priv = hw->priv;
+ phw_data_t pHwData;
+ u8 *pMacAddr;
+ u8 *pMacAddr2;
+ u32 InitStep = 0;
+ u8 EEPROM_region;
+ u8 HwRadioOff;
+
+ //
+ // Setting default value for Linux
+ //
+ priv->sLocalPara.region_INF = REGION_AUTO;
+ priv->sLocalPara.TxRateMode = RATE_AUTO;
+ priv->sLocalPara.bMacOperationMode = MODE_802_11_BG; // B/G mode
+ priv->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
+ priv->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
+ hal_set_phy_type( &priv->sHwData, RF_WB_242_1 );
+ priv->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
+ priv->sLocalPara.bPreambleMode = AUTO_MODE;
+ priv->sLocalPara.RadioOffStatus.boSwRadioOff = false;
+ pHwData = &priv->sHwData;
+ hal_set_phy_type( pHwData, RF_DECIDE_BY_INF );
+
+ // Initial Software variable
+ priv->sLocalPara.ShutDowned = false;
+
+ //added by ws for wep key error detection
+ priv->sLocalPara.bWepKeyError= false;
+ priv->sLocalPara.bToSelfPacketReceived = false;
+ priv->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds
+
+ // Initial USB hal
+ InitStep = 1;
+ pHwData = &priv->sHwData;
+ if (!hal_init_hardware(hw))
+ goto error;
+
+ EEPROM_region = hal_get_region_from_EEPROM( pHwData );
+ if (EEPROM_region != REGION_AUTO)
+ priv->sLocalPara.region = EEPROM_region;
+ else {
+ if (priv->sLocalPara.region_INF != REGION_AUTO)
+ priv->sLocalPara.region = priv->sLocalPara.region_INF;
+ else
+ priv->sLocalPara.region = REGION_USA; //default setting
+ }
+
+ // Get Software setting flag from hal
+ priv->sLocalPara.boAntennaDiversity = false;
+ if (hal_software_set(pHwData) & 0x00000001)
+ priv->sLocalPara.boAntennaDiversity = true;
+
+ //
+ // For TS module
+ //
+ InitStep = 2;
+
+ // For MDS module
+ InitStep = 3;
+ Mds_initial(priv);
+
+ //=======================================
+ // Initialize the SME, SCAN, MLME, ROAM
+ //=======================================
+ InitStep = 4;
+ InitStep = 5;
+ InitStep = 6;
+
+ // If no user-defined address in the registry, use the addresss "burned" on the NIC instead.
+ pMacAddr = priv->sLocalPara.ThisMacAddress;
+ pMacAddr2 = priv->sLocalPara.PermanentAddress;
+ hal_get_permanent_address( pHwData, priv->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM
+ if (memcmp(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH) == 0)
+ memcpy(pMacAddr, pMacAddr2, MAC_ADDR_LENGTH);
+ else {
+ // Set the user define MAC address
+ hal_set_ethernet_address(pHwData, priv->sLocalPara.ThisMacAddress);
+ }
+
+ //get current antenna
+ priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData);
+#ifdef _PE_STATE_DUMP_
+ WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo));
+#endif
+ hal_get_hw_radio_off( pHwData );
+
+ // Waiting for HAL setting OK
+ while (!hal_idle(pHwData))
+ msleep(10);
+
+ MTO_Init(priv);
+
+ HwRadioOff = hal_get_hw_radio_off( pHwData );
+ priv->sLocalPara.RadioOffStatus.boHwRadioOff = !!HwRadioOff;
+
+ hal_set_radio_mode( pHwData, (unsigned char)(priv->sLocalPara.RadioOffStatus.boSwRadioOff || priv->sLocalPara.RadioOffStatus.boHwRadioOff) );
+
+ hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now.
+ //set a tx power for reference.....
+// sme_set_tx_power_level(priv, 12); FIXME?
+ return true;
+
+error:
+ switch (InitStep) {
+ case 5:
+ case 4:
+ case 3: Mds_Destroy( priv );
+ case 2:
+ case 1: WBLINUX_stop(priv);
+ hal_halt( pHwData, NULL );
+ case 0: break;
+ }
+
+ return false;
+}
+
static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table)
{
PWBUSB pWbUsb;
priv = dev->priv;
+ spin_lock_init(&priv->SpinLock);
+
pWbUsb = &priv->sHwData.WbUsb;
pWbUsb->udev = udev;
pWbUsb->IsUsb20 = 1;
}
- if (!WbWLanInitialize(dev)) {
+ if (!wb35_hw_init(dev)) {
err = -EINVAL;
goto error_free_hw;
}
ieee80211_rx_irqsafe(hw, skb, &rx_status);
}
+static void wb35_hw_halt(struct wbsoft_priv *adapter)
+{
+ //---------------------
+ adapter->sLocalPara.ShutDowned = true;
+
+ Mds_Destroy( adapter );
+
+ // Turn off Rx and Tx hardware ability
+ hal_stop( &adapter->sHwData );
+#ifdef _PE_USB_INI_DUMP_
+ WBDEBUG(("[w35und] Hal_stop O.K.\n"));
+#endif
+ msleep(100);// Waiting Irp completed
+
+ // Destroy the NDIS module
+ WBLINUX_stop(adapter);
+
+ // Halt the HAL
+ hal_halt(&adapter->sHwData, NULL);
+}
+
+
static void wb35_disconnect(struct usb_interface *intf)
{
struct wbsoft_priv *priv = usb_get_intfdata(intf);
- WbWlanHalt(priv);
+ wb35_hw_halt(priv);
usb_set_intfdata(intf, NULL);
usb_put_dev(interface_to_usbdev(intf));
projects / linux-2.6-omap-h63xx.git / commitdiff