#define TOSA_KEY_MAIL KEY_MAIL
#endif
+struct spi_device;
+extern int tosa_bl_enable(struct spi_device *spi, int enable);
+
#endif /* _ASM_ARCH_TOSA_H_ */
#include <linux/gpio.h>
#include <linux/pda_power.h>
#include <linux/rfkill.h>
+#include <linux/spi/spi.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/tosa_bt.h>
+#include <mach/pxa2xx_spi.h>
#include <asm/mach/arch.h>
#include <mach/tosa.h>
rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
if (rc)
goto err_req_suspend;
- rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "l3v");
+ rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "tc6393xb l3v");
if (rc)
goto err_req_l3v;
rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
.dev.platform_data = &tosa_bt_data,
};
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+ .num_chipselect = 1,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+ {
+ .modalias = "tosa-lcd",
+ // .platform_data
+ .max_speed_hz = 28750,
+ .bus_num = 2,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ },
+};
static struct platform_device *devices[] __initdata = {
&tosascoop_device,
pxa_set_i2c_info(NULL);
platform_scoop_config = &tosa_pcmcia_config;
+ pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
This driver provides a platform-device registered LCD power
control interface.
+config LCD_TOSA
+ tristate "Sharp SL-6000 LCD Driver"
+ depends on LCD_CLASS_DEVICE && SPI
+ depends on MACH_TOSA
+ default n
+ help
+ If you have an Sharp SL-6000 Zaurus say Y to enable a driver
+ for its LCD.
+
#
# Backlight
#
If you have a LCD backlight adjustable by PWM, say Y to enable
this driver.
+config BACKLIGHT_DA903X
+ tristate "Backlight Driver for DA9030/DA9034 using WLED"
+ depends on BACKLIGHT_CLASS_DEVICE && PMIC_DA903X
+ help
+ If you have a LCD backlight connected to the WLED output of DA9030
+ or DA9034 WLED output, say Y here to enable this driver.
+
config BACKLIGHT_MBP_NVIDIA
tristate "MacBook Pro Nvidia Backlight Driver"
depends on BACKLIGHT_CLASS_DEVICE && X86
If you have an Apple Macbook Pro with Nvidia graphics hardware say Y
to enable a driver for its backlight
+config BACKLIGHT_TOSA
+ tristate "Sharp SL-6000 Backlight Driver"
+ depends on BACKLIGHT_CLASS_DEVICE && I2C
+ depends on MACH_TOSA && LCD_TOSA
+ default n
+ help
+ If you have an Sharp SL-6000 Zaurus say Y to enable a driver
+ for its backlight
+
+config BACKLIGHT_SAHARA
+ tristate "Tabletkiosk Sahara Touch-iT Backlight Driver"
+ depends on BACKLIGHT_CLASS_DEVICE && X86
+ default n
+ help
+ If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
+ backlight driver.
obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o
obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o
obj-$(CONFIG_LCD_TDO24M) += tdo24m.o
+obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o
+obj-$(CONFIG_BACKLIGHT_DA903X) += da903x.o
obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o
+obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o
+obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
--- /dev/null
+/*
+ * Backlight driver for Dialog Semiconductor DA9030/DA9034
+ *
+ * Copyright (C) 2008 Compulab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * Copyright (C) 2006-2008 Marvell International Ltd.
+ * Eric Miao <eric.miao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/mfd/da903x.h>
+
+#define DA9030_WLED_CONTROL 0x25
+#define DA9030_WLED_CP_EN (1 << 6)
+#define DA9030_WLED_TRIM(x) ((x) & 0x7)
+
+#define DA9034_WLED_CONTROL1 0x3C
+#define DA9034_WLED_CONTROL2 0x3D
+
+#define DA9034_WLED_BOOST_EN (1 << 5)
+
+#define DA9030_MAX_BRIGHTNESS 7
+#define DA9034_MAX_BRIGHTNESS 0x7f
+
+struct da903x_backlight_data {
+ struct device *da903x_dev;
+ int id;
+ int current_brightness;
+};
+
+static int da903x_backlight_set(struct backlight_device *bl, int brightness)
+{
+ struct da903x_backlight_data *data = bl_get_data(bl);
+ struct device *dev = data->da903x_dev;
+ uint8_t val;
+ int ret = 0;
+
+ switch (data->id) {
+ case DA9034_ID_WLED:
+ ret = da903x_update(dev, DA9034_WLED_CONTROL1,
+ brightness, 0x7f);
+ if (ret)
+ return ret;
+
+ if (data->current_brightness && brightness == 0)
+ ret = da903x_clr_bits(dev,
+ DA9034_WLED_CONTROL2,
+ DA9034_WLED_BOOST_EN);
+
+ if (data->current_brightness == 0 && brightness)
+ ret = da903x_set_bits(dev,
+ DA9034_WLED_CONTROL2,
+ DA9034_WLED_BOOST_EN);
+ break;
+ case DA9030_ID_WLED:
+ val = DA9030_WLED_TRIM(brightness);
+ val |= brightness ? DA9030_WLED_CP_EN : 0;
+ ret = da903x_write(dev, DA9030_WLED_CONTROL, val);
+ break;
+ }
+
+ if (ret)
+ return ret;
+
+ data->current_brightness = brightness;
+ return 0;
+}
+
+static int da903x_backlight_update_status(struct backlight_device *bl)
+{
+ int brightness = bl->props.brightness;
+
+ if (bl->props.power != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ return da903x_backlight_set(bl, brightness);
+}
+
+static int da903x_backlight_get_brightness(struct backlight_device *bl)
+{
+ struct da903x_backlight_data *data = bl_get_data(bl);
+ return data->current_brightness;
+}
+
+static struct backlight_ops da903x_backlight_ops = {
+ .update_status = da903x_backlight_update_status,
+ .get_brightness = da903x_backlight_get_brightness,
+};
+
+static int da903x_backlight_probe(struct platform_device *pdev)
+{
+ struct da903x_backlight_data *data;
+ struct backlight_device *bl;
+ int max_brightness;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ switch (pdev->id) {
+ case DA9030_ID_WLED:
+ max_brightness = DA9030_MAX_BRIGHTNESS;
+ break;
+ case DA9034_ID_WLED:
+ max_brightness = DA9034_MAX_BRIGHTNESS;
+ break;
+ default:
+ dev_err(&pdev->dev, "invalid backlight device ID(%d)\n",
+ pdev->id);
+ return -EINVAL;
+ }
+
+ data->id = pdev->id;
+ data->da903x_dev = pdev->dev.parent;
+ data->current_brightness = 0;
+
+ bl = backlight_device_register(pdev->name, data->da903x_dev,
+ data, &da903x_backlight_ops);
+ if (IS_ERR(bl)) {
+ dev_err(&pdev->dev, "failed to register backlight\n");
+ return PTR_ERR(bl);
+ }
+
+ bl->props.max_brightness = max_brightness;
+ bl->props.brightness = max_brightness;
+
+ platform_set_drvdata(pdev, bl);
+ backlight_update_status(bl);
+ return 0;
+}
+
+static int da903x_backlight_remove(struct platform_device *pdev)
+{
+ struct backlight_device *bl = platform_get_drvdata(pdev);
+ struct da903x_backlight_data *data = bl_get_data(bl);
+
+ backlight_device_unregister(bl);
+ kfree(data);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int da903x_backlight_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct backlight_device *bl = platform_get_drvdata(pdev);
+ return da903x_backlight_set(bl, 0);
+}
+
+static int da903x_backlight_resume(struct platform_device *pdev)
+{
+ struct backlight_device *bl = platform_get_drvdata(pdev);
+
+ backlight_update_status(bl);
+ return 0;
+}
+#else
+#define da903x_backlight_suspend NULL
+#define da903x_backlight_resume NULL
+#endif
+
+static struct platform_driver da903x_backlight_driver = {
+ .driver = {
+ .name = "da903x-backlight",
+ .owner = THIS_MODULE,
+ },
+ .probe = da903x_backlight_probe,
+ .remove = da903x_backlight_remove,
+ .suspend = da903x_backlight_suspend,
+ .resume = da903x_backlight_resume,
+};
+
+static int __init da903x_backlight_init(void)
+{
+ return platform_driver_register(&da903x_backlight_driver);
+}
+module_init(da903x_backlight_init);
+
+static void __exit da903x_backlight_exit(void)
+{
+ platform_driver_unregister(&da903x_backlight_driver);
+}
+module_exit(da903x_backlight_exit);
+
+MODULE_DESCRIPTION("Backlight Driver for Dialog Semiconductor DA9030/DA9034");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"
+ "Mike Rapoport <mike@compulab.co.il>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da903x-backlight");
--- /dev/null
+/*
+ * Backlight Driver for the KB3886 Backlight
+ *
+ * Copyright (c) 2007-2008 Claudio Nieder
+ *
+ * Based on corgi_bl.c by Richard Purdie and kb3886 driver by Robert Woerle
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
+
+#define KB3886_PARENT 0x64
+#define KB3886_IO 0x60
+#define KB3886_ADC_DAC_PWM 0xC4
+#define KB3886_PWM0_WRITE 0x81
+#define KB3886_PWM0_READ 0x41
+
+static DEFINE_MUTEX(bl_mutex);
+
+static void kb3886_bl_set_intensity(int intensity)
+{
+ mutex_lock(&bl_mutex);
+ intensity = intensity&0xff;
+ outb(KB3886_ADC_DAC_PWM, KB3886_PARENT);
+ msleep(10);
+ outb(KB3886_PWM0_WRITE, KB3886_IO);
+ msleep(10);
+ outb(intensity, KB3886_IO);
+ mutex_unlock(&bl_mutex);
+}
+
+struct kb3886bl_machinfo {
+ int max_intensity;
+ int default_intensity;
+ int limit_mask;
+ void (*set_bl_intensity)(int intensity);
+};
+
+static struct kb3886bl_machinfo kb3886_bl_machinfo = {
+ .max_intensity = 0xff,
+ .default_intensity = 0xa0,
+ .limit_mask = 0x7f,
+ .set_bl_intensity = kb3886_bl_set_intensity,
+};
+
+static struct platform_device kb3886bl_device = {
+ .name = "kb3886-bl",
+ .dev = {
+ .platform_data = &kb3886_bl_machinfo,
+ },
+ .id = -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &kb3886bl_device,
+};
+
+/*
+ * Back to driver
+ */
+
+static int kb3886bl_intensity;
+static struct backlight_device *kb3886_backlight_device;
+static struct kb3886bl_machinfo *bl_machinfo;
+
+static unsigned long kb3886bl_flags;
+#define KB3886BL_SUSPENDED 0x01
+
+static struct dmi_system_id __initdata kb3886bl_device_table[] = {
+ {
+ .ident = "Sahara Touch-iT",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SDV"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "iTouch T201"),
+ },
+ },
+ { }
+};
+
+static int kb3886bl_send_intensity(struct backlight_device *bd)
+{
+ int intensity = bd->props.brightness;
+
+ if (bd->props.power != FB_BLANK_UNBLANK)
+ intensity = 0;
+ if (bd->props.fb_blank != FB_BLANK_UNBLANK)
+ intensity = 0;
+ if (kb3886bl_flags & KB3886BL_SUSPENDED)
+ intensity = 0;
+
+ bl_machinfo->set_bl_intensity(intensity);
+
+ kb3886bl_intensity = intensity;
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int kb3886bl_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct backlight_device *bd = platform_get_drvdata(pdev);
+
+ kb3886bl_flags |= KB3886BL_SUSPENDED;
+ backlight_update_status(bd);
+ return 0;
+}
+
+static int kb3886bl_resume(struct platform_device *pdev)
+{
+ struct backlight_device *bd = platform_get_drvdata(pdev);
+
+ kb3886bl_flags &= ~KB3886BL_SUSPENDED;
+ backlight_update_status(bd);
+ return 0;
+}
+#else
+#define kb3886bl_suspend NULL
+#define kb3886bl_resume NULL
+#endif
+
+static int kb3886bl_get_intensity(struct backlight_device *bd)
+{
+ return kb3886bl_intensity;
+}
+
+static struct backlight_ops kb3886bl_ops = {
+ .get_brightness = kb3886bl_get_intensity,
+ .update_status = kb3886bl_send_intensity,
+};
+
+static int kb3886bl_probe(struct platform_device *pdev)
+{
+ struct kb3886bl_machinfo *machinfo = pdev->dev.platform_data;
+
+ bl_machinfo = machinfo;
+ if (!machinfo->limit_mask)
+ machinfo->limit_mask = -1;
+
+ kb3886_backlight_device = backlight_device_register("kb3886-bl",
+ &pdev->dev, NULL, &kb3886bl_ops);
+ if (IS_ERR(kb3886_backlight_device))
+ return PTR_ERR(kb3886_backlight_device);
+
+ platform_set_drvdata(pdev, kb3886_backlight_device);
+
+ kb3886_backlight_device->props.max_brightness = machinfo->max_intensity;
+ kb3886_backlight_device->props.power = FB_BLANK_UNBLANK;
+ kb3886_backlight_device->props.brightness = machinfo->default_intensity;
+ backlight_update_status(kb3886_backlight_device);
+
+ return 0;
+}
+
+static int kb3886bl_remove(struct platform_device *pdev)
+{
+ struct backlight_device *bd = platform_get_drvdata(pdev);
+
+ backlight_device_unregister(bd);
+
+ return 0;
+}
+
+static struct platform_driver kb3886bl_driver = {
+ .probe = kb3886bl_probe,
+ .remove = kb3886bl_remove,
+ .suspend = kb3886bl_suspend,
+ .resume = kb3886bl_resume,
+ .driver = {
+ .name = "kb3886-bl",
+ },
+};
+
+static int __init kb3886_init(void)
+{
+ if (!dmi_check_system(kb3886bl_device_table))
+ return -ENODEV;
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ return platform_driver_register(&kb3886bl_driver);
+}
+
+static void __exit kb3886_exit(void)
+{
+ platform_driver_unregister(&kb3886bl_driver);
+}
+
+module_init(kb3886_init);
+module_exit(kb3886_exit);
+
+MODULE_AUTHOR("Claudio Nieder <private@claudio.ch>");
+MODULE_DESCRIPTION("Tabletkiosk Sahara Touch-iT Backlight Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("dmi:*:svnSDV:pniTouchT201:*");
--- /dev/null
+/*
+ * LCD / Backlight control code for Sharp SL-6000x (tosa)
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ * Copyright (c) 2007,2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+
+#include <asm/mach/sharpsl_param.h>
+
+#include <mach/tosa.h>
+
+#define COMADJ_DEFAULT 97
+
+#define DAC_CH1 0
+#define DAC_CH2 1
+
+struct tosa_bl_data {
+ struct i2c_client *i2c;
+ struct backlight_device *bl;
+
+ int comadj;
+};
+
+static void tosa_bl_set_backlight(struct tosa_bl_data *data, int brightness)
+{
+ struct spi_device *spi = data->i2c->dev.platform_data;
+
+ i2c_smbus_write_byte_data(data->i2c, DAC_CH1, data->comadj);
+
+ /* SetBacklightDuty */
+ i2c_smbus_write_byte_data(data->i2c, DAC_CH2, (u8)(brightness & 0xff));
+
+ /* SetBacklightVR */
+ gpio_set_value(TOSA_GPIO_BL_C20MA, brightness & 0x100);
+
+ tosa_bl_enable(spi, brightness);
+}
+
+static int tosa_bl_update_status(struct backlight_device *dev)
+{
+ struct backlight_properties *props = &dev->props;
+ struct tosa_bl_data *data = dev_get_drvdata(&dev->dev);
+ int power = max(props->power, props->fb_blank);
+ int brightness = props->brightness;
+
+ if (power)
+ brightness = 0;
+
+ tosa_bl_set_backlight(data, brightness);
+
+ return 0;
+}
+
+static int tosa_bl_get_brightness(struct backlight_device *dev)
+{
+ struct backlight_properties *props = &dev->props;
+
+ return props->brightness;
+}
+
+static struct backlight_ops bl_ops = {
+ .get_brightness = tosa_bl_get_brightness,
+ .update_status = tosa_bl_update_status,
+};
+
+static int __devinit tosa_bl_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct tosa_bl_data *data = kzalloc(sizeof(struct tosa_bl_data), GFP_KERNEL);
+ int ret = 0;
+ if (!data)
+ return -ENOMEM;
+
+ data->comadj = sharpsl_param.comadj == -1 ? COMADJ_DEFAULT : sharpsl_param.comadj;
+
+ ret = gpio_request(TOSA_GPIO_BL_C20MA, "backlight");
+ if (ret) {
+ dev_dbg(&data->bl->dev, "Unable to request gpio!\n");
+ goto err_gpio_bl;
+ }
+ ret = gpio_direction_output(TOSA_GPIO_BL_C20MA, 0);
+ if (ret)
+ goto err_gpio_dir;
+
+ i2c_set_clientdata(client, data);
+ data->i2c = client;
+
+ data->bl = backlight_device_register("tosa-bl", &client->dev,
+ data, &bl_ops);
+ if (IS_ERR(data->bl)) {
+ ret = PTR_ERR(data->bl);
+ goto err_reg;
+ }
+
+ data->bl->props.brightness = 69;
+ data->bl->props.max_brightness = 512 - 1;
+ data->bl->props.power = FB_BLANK_UNBLANK;
+
+ backlight_update_status(data->bl);
+
+ return 0;
+
+err_reg:
+ data->bl = NULL;
+ i2c_set_clientdata(client, NULL);
+err_gpio_dir:
+ gpio_free(TOSA_GPIO_BL_C20MA);
+err_gpio_bl:
+ kfree(data);
+ return ret;
+}
+
+static int __devexit tosa_bl_remove(struct i2c_client *client)
+{
+ struct tosa_bl_data *data = i2c_get_clientdata(client);
+
+ backlight_device_unregister(data->bl);
+ data->bl = NULL;
+ i2c_set_clientdata(client, NULL);
+
+ gpio_free(TOSA_GPIO_BL_C20MA);
+
+ kfree(data);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int tosa_bl_suspend(struct i2c_client *client, pm_message_t pm)
+{
+ struct tosa_bl_data *data = i2c_get_clientdata(client);
+
+ tosa_bl_set_backlight(data, 0);
+
+ return 0;
+}
+
+static int tosa_bl_resume(struct i2c_client *client)
+{
+ struct tosa_bl_data *data = i2c_get_clientdata(client);
+
+ backlight_update_status(data->bl);
+ return 0;
+}
+#else
+#define tosa_bl_suspend NULL
+#define tosa_bl_resume NULL
+#endif
+
+static const struct i2c_device_id tosa_bl_id[] = {
+ { "tosa-bl", 0 },
+ { },
+};
+
+
+static struct i2c_driver tosa_bl_driver = {
+ .driver = {
+ .name = "tosa-bl",
+ .owner = THIS_MODULE,
+ },
+ .probe = tosa_bl_probe,
+ .remove = __devexit_p(tosa_bl_remove),
+ .suspend = tosa_bl_suspend,
+ .resume = tosa_bl_resume,
+ .id_table = tosa_bl_id,
+};
+
+static int __init tosa_bl_init(void)
+{
+ return i2c_add_driver(&tosa_bl_driver);
+}
+
+static void __exit tosa_bl_exit(void)
+{
+ i2c_del_driver(&tosa_bl_driver);
+}
+
+module_init(tosa_bl_init);
+module_exit(tosa_bl_exit);
+
+MODULE_AUTHOR("Dmitry Baryshkov");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("LCD/Backlight control for Sharp SL-6000 PDA");
+
--- /dev/null
+/*
+ * LCD / Backlight control code for Sharp SL-6000x (tosa)
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ * Copyright (c) 2007,2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/lcd.h>
+#include <linux/fb.h>
+
+#include <asm/mach/sharpsl_param.h>
+
+#include <mach/tosa.h>
+
+#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
+
+#define TG_REG0_VQV 0x0001
+#define TG_REG0_COLOR 0x0002
+#define TG_REG0_UD 0x0004
+#define TG_REG0_LR 0x0008
+
+#define DAC_BASE 0x4e
+
+struct tosa_lcd_data {
+ struct spi_device *spi;
+ struct lcd_device *lcd;
+ struct i2c_client *i2c;
+
+ int lcd_power;
+};
+
+static int tosa_tg_send(struct spi_device *spi, int adrs, uint8_t data)
+{
+ u8 buf[1];
+ struct spi_message msg;
+ struct spi_transfer xfer = {
+ .len = 1,
+ .cs_change = 1,
+ .tx_buf = buf,
+ };
+
+ buf[0] = ((adrs & 0x07) << 5) | (data & 0x1f);
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfer, &msg);
+
+ return spi_sync(spi, &msg);
+}
+
+int tosa_bl_enable(struct spi_device *spi, int enable)
+{
+ /* bl_enable GP04=1 otherwise GP04=0*/
+ return tosa_tg_send(spi, TG_GPODR2, enable? 0x01 : 0x00);
+}
+EXPORT_SYMBOL(tosa_bl_enable);
+
+static void tosa_lcd_tg_init(struct tosa_lcd_data *data)
+{
+ /* TG on */
+ gpio_set_value(TOSA_GPIO_TG_ON, 0);
+
+ mdelay(60);
+
+ /* delayed 0clk TCTL signal for VGA */
+ tosa_tg_send(data->spi, TG_TPOSCTL, 0x00);
+ /* GPOS0=powercontrol, GPOS1=GPIO, GPOS2=TCTL */
+ tosa_tg_send(data->spi, TG_GPOSR, 0x02);
+}
+
+static void tosa_lcd_tg_on(struct tosa_lcd_data *data)
+{
+ struct spi_device *spi = data->spi;
+ const int value = TG_REG0_COLOR | TG_REG0_UD | TG_REG0_LR;
+ tosa_tg_send(spi, TG_PNLCTL, value | TG_REG0_VQV); /* this depends on mode */
+
+ /* TG LCD pannel power up */
+ tosa_tg_send(spi, TG_PINICTL,0x4);
+ mdelay(50);
+
+ /* TG LCD GVSS */
+ tosa_tg_send(spi, TG_PINICTL,0x0);
+
+ if (!data->i2c) {
+ /* after the pannel is powered up the first time, we can access the i2c bus */
+ /* so probe for the DAC */
+ struct i2c_adapter *adap = i2c_get_adapter(0);
+ struct i2c_board_info info = {
+ .type = "tosa-bl",
+ .addr = DAC_BASE,
+ .platform_data = data->spi,
+ };
+ data->i2c = i2c_new_device(adap, &info);
+ }
+}
+
+static void tosa_lcd_tg_off(struct tosa_lcd_data *data)
+{
+ struct spi_device *spi = data->spi;
+
+ /* TG LCD VHSA off */
+ tosa_tg_send(spi, TG_PINICTL,0x4);
+ mdelay(50);
+
+ /* TG LCD signal off */
+ tosa_tg_send(spi, TG_PINICTL,0x6);
+ mdelay(50);
+
+ /* TG Off */
+ gpio_set_value(TOSA_GPIO_TG_ON, 1);
+ mdelay(100);
+}
+
+int tosa_lcd_set_power(struct lcd_device *lcd, int power)
+{
+ struct tosa_lcd_data *data = lcd_get_data(lcd);
+
+ if (POWER_IS_ON(power) && !POWER_IS_ON(data->lcd_power))
+ tosa_lcd_tg_on(data);
+
+ if (!POWER_IS_ON(power) && POWER_IS_ON(data->lcd_power))
+ tosa_lcd_tg_off(data);
+
+ data->lcd_power = power;
+ return 0;
+}
+
+static int tosa_lcd_get_power(struct lcd_device *lcd)
+{
+ struct tosa_lcd_data *data = lcd_get_data(lcd);
+
+ return data->lcd_power;
+}
+
+static struct lcd_ops tosa_lcd_ops = {
+ .set_power = tosa_lcd_set_power,
+ .get_power = tosa_lcd_get_power,
+};
+
+static int __devinit tosa_lcd_probe(struct spi_device *spi)
+{
+ int ret;
+ struct tosa_lcd_data *data;
+
+ data = kzalloc(sizeof(struct tosa_lcd_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ /*
+ * bits_per_word cannot be configured in platform data
+ */
+ spi->bits_per_word = 8;
+
+ ret = spi_setup(spi);
+ if (ret < 0)
+ goto err_spi;
+
+ data->spi = spi;
+ dev_set_drvdata(&spi->dev, data);
+
+ ret = gpio_request(TOSA_GPIO_TG_ON, "tg #pwr");
+ if (ret < 0)
+ goto err_gpio_tg;
+
+ mdelay(60);
+
+ ret = gpio_direction_output(TOSA_GPIO_TG_ON, 0);
+ if (ret < 0)
+ goto err_gpio_dir;
+
+ mdelay(60);
+ tosa_lcd_tg_init(data);
+
+ tosa_lcd_tg_on(data);
+
+ data->lcd = lcd_device_register("tosa-lcd", &spi->dev, data,
+ &tosa_lcd_ops);
+
+ if (IS_ERR(data->lcd)) {
+ ret = PTR_ERR(data->lcd);
+ data->lcd = NULL;
+ goto err_register;
+ }
+
+ return 0;
+
+err_register:
+ tosa_lcd_tg_off(data);
+err_gpio_dir:
+ gpio_free(TOSA_GPIO_TG_ON);
+err_gpio_tg:
+ dev_set_drvdata(&spi->dev, NULL);
+err_spi:
+ kfree(data);
+ return ret;
+}
+
+static int __devexit tosa_lcd_remove(struct spi_device *spi)
+{
+ struct tosa_lcd_data *data = dev_get_drvdata(&spi->dev);
+
+ lcd_device_unregister(data->lcd);
+
+ if (data->i2c)
+ i2c_unregister_device(data->i2c);
+
+ tosa_lcd_tg_off(data);
+
+ gpio_free(TOSA_GPIO_TG_ON);
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(data);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int tosa_lcd_suspend(struct spi_device *spi, pm_message_t state)
+{
+ struct tosa_lcd_data *data = dev_get_drvdata(&spi->dev);
+
+ tosa_lcd_tg_off(data);
+
+ return 0;
+}
+
+static int tosa_lcd_resume(struct spi_device *spi)
+{
+ struct tosa_lcd_data *data = dev_get_drvdata(&spi->dev);
+
+ tosa_lcd_tg_init(data);
+ if (POWER_IS_ON(data->lcd_power))
+ tosa_lcd_tg_on(data);
+ else
+ tosa_lcd_tg_off(data);
+
+ return 0;
+}
+#else
+#define tosa_lcd_suspend NULL
+#define tosa_lcd_reume NULL
+#endif
+
+static struct spi_driver tosa_lcd_driver = {
+ .driver = {
+ .name = "tosa-lcd",
+ .owner = THIS_MODULE,
+ },
+ .probe = tosa_lcd_probe,
+ .remove = __devexit_p(tosa_lcd_remove),
+ .suspend = tosa_lcd_suspend,
+ .resume = tosa_lcd_resume,
+};
+
+static int __init tosa_lcd_init(void)
+{
+ return spi_register_driver(&tosa_lcd_driver);
+}
+
+static void __exit tosa_lcd_exit(void)
+{
+ spi_unregister_driver(&tosa_lcd_driver);
+}
+
+module_init(tosa_lcd_init);
+module_exit(tosa_lcd_exit);
+
+MODULE_AUTHOR("Dmitry Baryshkov");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("LCD/Backlight control for Sharp SL-6000 PDA");
+
projects / linux-2.6-omap-h63xx.git / commitdiff