]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
serial/mpc52xx_uart: remove code associated with !CONFIG_PPC_MERGE
authorKumar Gala <galak@kernel.crashing.org>
Fri, 1 Aug 2008 16:09:34 +0000 (11:09 -0500)
committerKumar Gala <galak@kernel.crashing.org>
Thu, 25 Sep 2008 15:28:26 +0000 (10:28 -0500)
Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore
remove the dead code associated with !CONFIG_PPC_MERGE.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
drivers/serial/mpc52xx_uart.c

index 36126070d9af8ad10071600b4d53bdb9d947d661..6117d3db0b668980618991a2f66f578410f6e1a7 100644 (file)
 #include <linux/console.h>
 #include <linux/delay.h>
 #include <linux/io.h>
-
-#if defined(CONFIG_PPC_MERGE)
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#else
-#include <linux/platform_device.h>
-#endif
 
 #include <asm/mpc52xx.h>
 #include <asm/mpc512x.h>
@@ -107,12 +102,11 @@ static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM];
         *        it's cleared, then a memset(...,0,...) should be added to
         *        the console_init
         */
-#if defined(CONFIG_PPC_MERGE)
+
 /* lookup table for matching device nodes to index numbers */
 static struct device_node *mpc52xx_uart_nodes[MPC52xx_PSC_MAXNUM];
 
 static void mpc52xx_uart_of_enumerate(void);
-#endif
 
 
 #define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase))
@@ -255,17 +249,12 @@ static void mpc52xx_psc_cw_restore_ints(struct uart_port *port)
 /* Search for bus-frequency property in this node or a parent */
 static unsigned long mpc52xx_getuartclk(void *p)
 {
-#if defined(CONFIG_PPC_MERGE)
        /*
         * 5200 UARTs have a / 32 prescaler
         * but the generic serial code assumes 16
         * so return ipb freq / 2
         */
        return mpc52xx_find_ipb_freq(p) / 2;
-#else
-       pr_debug("unexpected call to mpc52xx_getuartclk with arch/ppc\n");
-       return NULL;
-#endif
 }
 
 static struct psc_ops mpc52xx_psc_ops = {
@@ -886,10 +875,6 @@ mpc52xx_console_get_options(struct uart_port *port,
 
        /* CT{U,L}R are write-only ! */
        *baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
-#if !defined(CONFIG_PPC_MERGE)
-       if (__res.bi_baudrate)
-               *baud = __res.bi_baudrate;
-#endif
 
        /* Parse them */
        switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) {
@@ -946,42 +931,6 @@ mpc52xx_console_write(struct console *co, const char *s, unsigned int count)
        psc_ops->cw_restore_ints(port);
 }
 
-#if !defined(CONFIG_PPC_MERGE)
-static int __init
-mpc52xx_console_setup(struct console *co, char *options)
-{
-       struct uart_port *port = &mpc52xx_uart_ports[co->index];
-
-       int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
-       int bits = 8;
-       int parity = 'n';
-       int flow = 'n';
-
-       if (co->index < 0 || co->index >= MPC52xx_PSC_MAXNUM)
-               return -EINVAL;
-
-       /* Basic port init. Needed since we use some uart_??? func before
-        * real init for early access */
-       spin_lock_init(&port->lock);
-       port->uartclk   = __res.bi_ipbfreq / 2; /* Look at CTLR doc */
-       port->ops       = &mpc52xx_uart_ops;
-       port->mapbase   = MPC52xx_PA(MPC52xx_PSCx_OFFSET(co->index+1));
-
-       /* We ioremap ourself */
-       port->membase = ioremap(port->mapbase, MPC52xx_PSC_SIZE);
-       if (port->membase == NULL)
-               return -EINVAL;
-
-       /* Setup the port parameters accoding to options */
-       if (options)
-               uart_parse_options(options, &baud, &parity, &bits, &flow);
-       else
-               mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow);
-
-       return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-#else
 
 static int __init
 mpc52xx_console_setup(struct console *co, char *options)
@@ -1053,7 +1002,6 @@ mpc52xx_console_setup(struct console *co, char *options)
 
        return uart_set_options(port, co, baud, parity, bits, flow);
 }
-#endif /* defined(CONFIG_PPC_MERGE) */
 
 
 static struct uart_driver mpc52xx_uart_driver;
@@ -1072,9 +1020,7 @@ static struct console mpc52xx_console = {
 static int __init
 mpc52xx_console_init(void)
 {
-#if defined(CONFIG_PPC_MERGE)
        mpc52xx_uart_of_enumerate();
-#endif
        register_console(&mpc52xx_console);
        return 0;
 }
@@ -1100,115 +1046,6 @@ static struct uart_driver mpc52xx_uart_driver = {
        .cons           = MPC52xx_PSC_CONSOLE,
 };
 
-
-#if !defined(CONFIG_PPC_MERGE)
-/* ======================================================================== */
-/* Platform Driver                                                          */
-/* ======================================================================== */
-
-static int __devinit
-mpc52xx_uart_probe(struct platform_device *dev)
-{
-       struct resource *res = dev->resource;
-
-       struct uart_port *port = NULL;
-       int i, idx, ret;
-
-       /* Check validity & presence */
-       idx = dev->id;
-       if (idx < 0 || idx >= MPC52xx_PSC_MAXNUM)
-               return -EINVAL;
-
-       if (!mpc52xx_match_psc_function(idx, "uart"))
-               return -ENODEV;
-
-       /* Init the port structure */
-       port = &mpc52xx_uart_ports[idx];
-
-       spin_lock_init(&port->lock);
-       port->uartclk   = __res.bi_ipbfreq / 2; /* Look at CTLR doc */
-       port->fifosize  = 512;
-       port->iotype    = UPIO_MEM;
-       port->flags     = UPF_BOOT_AUTOCONF |
-                         (uart_console(port) ? 0 : UPF_IOREMAP);
-       port->line      = idx;
-       port->ops       = &mpc52xx_uart_ops;
-       port->dev       = &dev->dev;
-
-       /* Search for IRQ and mapbase */
-       for (i = 0 ; i < dev->num_resources ; i++, res++) {
-               if (res->flags & IORESOURCE_MEM)
-                       port->mapbase = res->start;
-               else if (res->flags & IORESOURCE_IRQ)
-                       port->irq = res->start;
-       }
-       if (!port->irq || !port->mapbase)
-               return -EINVAL;
-
-       /* Add the port to the uart sub-system */
-       ret = uart_add_one_port(&mpc52xx_uart_driver, port);
-       if (!ret)
-               platform_set_drvdata(dev, (void *)port);
-
-       return ret;
-}
-
-static int
-mpc52xx_uart_remove(struct platform_device *dev)
-{
-       struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
-
-       platform_set_drvdata(dev, NULL);
-
-       if (port)
-               uart_remove_one_port(&mpc52xx_uart_driver, port);
-
-       return 0;
-}
-
-#ifdef CONFIG_PM
-static int
-mpc52xx_uart_suspend(struct platform_device *dev, pm_message_t state)
-{
-       struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
-
-       if (port)
-               uart_suspend_port(&mpc52xx_uart_driver, port);
-
-       return 0;
-}
-
-static int
-mpc52xx_uart_resume(struct platform_device *dev)
-{
-       struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
-
-       if (port)
-               uart_resume_port(&mpc52xx_uart_driver, port);
-
-       return 0;
-}
-#endif
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:mpc52xx-psc");
-
-static struct platform_driver mpc52xx_uart_platform_driver = {
-       .probe          = mpc52xx_uart_probe,
-       .remove         = mpc52xx_uart_remove,
-#ifdef CONFIG_PM
-       .suspend        = mpc52xx_uart_suspend,
-       .resume         = mpc52xx_uart_resume,
-#endif
-       .driver         = {
-               .owner  = THIS_MODULE,
-               .name   = "mpc52xx-psc",
-       },
-};
-#endif /* !defined(CONFIG_PPC_MERGE) */
-
-
-#if defined(CONFIG_PPC_MERGE)
 /* ======================================================================== */
 /* OF Platform Driver                                                       */
 /* ======================================================================== */
@@ -1402,7 +1239,6 @@ static struct of_platform_driver mpc52xx_uart_of_driver = {
                .name   = "mpc52xx-psc-uart",
        },
 };
-#endif /* defined(CONFIG_PPC_MERGE) */
 
 
 /* ======================================================================== */
@@ -1423,7 +1259,6 @@ mpc52xx_uart_init(void)
                return ret;
        }
 
-#if defined(CONFIG_PPC_MERGE)
        mpc52xx_uart_of_enumerate();
 
        ret = of_register_platform_driver(&mpc52xx_uart_of_driver);
@@ -1433,16 +1268,6 @@ mpc52xx_uart_init(void)
                uart_unregister_driver(&mpc52xx_uart_driver);
                return ret;
        }
-#else
-       psc_ops = &mpc52xx_psc_ops;
-       ret = platform_driver_register(&mpc52xx_uart_platform_driver);
-       if (ret) {
-               printk(KERN_ERR "%s: platform_driver_register failed (%i)\n",
-                      __FILE__, ret);
-               uart_unregister_driver(&mpc52xx_uart_driver);
-               return ret;
-       }
-#endif
 
        return 0;
 }
@@ -1450,11 +1275,7 @@ mpc52xx_uart_init(void)
 static void __exit
 mpc52xx_uart_exit(void)
 {
-#if defined(CONFIG_PPC_MERGE)
        of_unregister_platform_driver(&mpc52xx_uart_of_driver);
-#else
-       platform_driver_unregister(&mpc52xx_uart_platform_driver);
-#endif
        uart_unregister_driver(&mpc52xx_uart_driver);
 }