]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
[ARM] 5296/1: [KS8695] Replace macro's with trailing underscores.
authorAndrew Victor <linux@maxim.org.za>
Tue, 7 Oct 2008 19:20:15 +0000 (20:20 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Thu, 9 Oct 2008 09:16:00 +0000 (10:16 +0100)
Replace Macro names that have trailing underscores.
Also use the IOPD() macro instead of a hard-coded bit-shift (for
better readability).

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arch/arm/mach-ks8695/gpio.c
arch/arm/mach-ks8695/include/mach/regs-gpio.h
arch/arm/mach-ks8695/include/mach/regs-lan.h
arch/arm/mach-ks8695/include/mach/regs-wan.h

index 3624e65cd89b8752622802799e2fc343324cb303..55cee776ff55151b657d8a827755a45f7714c5a3 100644 (file)
@@ -72,7 +72,7 @@ int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type)
 
        /* set pin as input */
        x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
-       x &= ~IOPM_(pin);
+       x &= ~IOPM(pin);
        __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
 
        local_irq_restore(flags);
@@ -108,7 +108,7 @@ int __init_or_module gpio_direction_input(unsigned int pin)
 
        /* set pin as input */
        x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
-       x &= ~IOPM_(pin);
+       x &= ~IOPM(pin);
        __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
 
        local_irq_restore(flags);
@@ -136,14 +136,14 @@ int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state)
        /* set line state */
        x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
        if (state)
-               x |= (1 << pin);
+               x |= IOPD(pin);
        else
-               x &= ~(1 << pin);
+               x &= ~IOPD(pin);
        __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
 
        /* set pin as output */
        x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
-       x |= IOPM_(pin);
+       x |= IOPM(pin);
        __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
 
        local_irq_restore(flags);
@@ -168,9 +168,9 @@ void gpio_set_value(unsigned int pin, unsigned int state)
        /* set output line state */
        x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
        if (state)
-               x |= (1 << pin);
+               x |= IOPD(pin);
        else
-               x &= ~(1 << pin);
+               x &= ~IOPD(pin);
        __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
 
        local_irq_restore(flags);
@@ -189,7 +189,7 @@ int gpio_get_value(unsigned int pin)
                return -EINVAL;
 
        x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
-       return (x & (1 << pin)) != 0;
+       return (x & IOPD(pin)) != 0;
 }
 EXPORT_SYMBOL(gpio_get_value);
 
@@ -240,7 +240,7 @@ static int ks8695_gpio_show(struct seq_file *s, void *unused)
        for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) {
                seq_printf(s, "%i:\t", i);
 
-               seq_printf(s, "%s\t", (mode & IOPM_(i)) ? "Output" : "Input");
+               seq_printf(s, "%s\t", (mode & IOPM(i)) ? "Output" : "Input");
 
                if (i <= KS8695_GPIO_3) {
                        if (ctrl & enable[i]) {
@@ -273,7 +273,7 @@ static int ks8695_gpio_show(struct seq_file *s, void *unused)
 
                seq_printf(s, "\t");
 
-               seq_printf(s, "%i\n", (data & IOPD_(i)) ? 1 : 0);
+               seq_printf(s, "%i\n", (data & IOPD(i)) ? 1 : 0);
        }
        return 0;
 }
index 0df6fe61d1ce59afe761183b5c073551f5c71bd3..90614a7d05486a1e7fb785c5622041a24147446c 100644 (file)
@@ -24,7 +24,7 @@
 
 
 /* Port Mode Register */
-#define IOPM_(x)               (1 << (x))      /* Mode for GPIO Pin x */
+#define IOPM(x)                        (1 << (x))      /* Mode for GPIO Pin x */
 
 /* Port Control Register */
 #define IOPC_IOTIM1EN          (1 << 17)       /* GPIO Pin for Timer1 Enable */
@@ -50,6 +50,6 @@
 #define IOPC_TM_EDGE           (6)             /* Both Edge Detection */
 
 /* Port Data Register */
-#define IOPD_(x)               (1 << (x))      /* Signal Level of GPIO Pin x */
+#define IOPD(x)                        (1 << (x))      /* Signal Level of GPIO Pin x */
 
 #endif
index 9ef409901e764247f88efbe7041b01250b093d20..82c5f3791afbc38dca37ce46056c1358ee2055d5 100644 (file)
@@ -29,8 +29,8 @@
 #define KS8695_LRDLB           (0x14)          /* Receive Descriptor List Base Address */
 #define KS8695_LMAL            (0x18)          /* MAC Station Address Low */
 #define KS8695_LMAH            (0x1c)          /* MAC Station Address High */
-#define KS8695_LMAAL_(n)       (0x80 + ((n)*8))        /* MAC Additional Station Address (0..15) Low */
-#define KS8695_LMAAH_(n)       (0x84 + ((n)*8))        /* MAC Additional Station Address (0..15) High */
+#define KS8695_LMAAL(n)                (0x80 + ((n)*8))        /* MAC Additional Station Address (0..15) Low */
+#define KS8695_LMAAH(n)                (0x84 + ((n)*8))        /* MAC Additional Station Address (0..15) High */
 
 
 /* DMA Transmit Control Register */
index eb494ec6e95690fb28f8c3fb44559d29c983a8ce..c475bed22b8ebceeaad05ebaf0de41cbf6547924 100644 (file)
@@ -29,8 +29,8 @@
 #define KS8695_WRDLB           (0x14)          /* Receive Descriptor List Base Address */
 #define KS8695_WMAL            (0x18)          /* MAC Station Address Low */
 #define KS8695_WMAH            (0x1c)          /* MAC Station Address High */
-#define KS8695_WMAAL_(n)       (0x80 + ((n)*8))        /* MAC Additional Station Address (0..15) Low */
-#define KS8695_WMAAH_(n)       (0x84 + ((n)*8))        /* MAC Additional Station Address (0..15) High */
+#define KS8695_WMAAL(n)                (0x80 + ((n)*8))        /* MAC Additional Station Address (0..15) Low */
+#define KS8695_WMAAH(n)                (0x84 + ((n)*8))        /* MAC Additional Station Address (0..15) High */
 
 
 /* DMA Transmit Control Register */