--- /dev/null
+/******************************************************************************
+ * itmtouch.c -- Driver for ITM touchscreen panel
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Based upon original work by Chris Collins <xfire-itmtouch@xware.cx>.
+ *
+ * Kudos to ITM for providing me with the datasheet for the panel,
+ * even though it was a day later than I had finished writing this
+ * driver.
+ *
+ * It has meant that I've been able to correct my interpretation of the
+ * protocol packets however.
+ *
+ * CC -- 2003/9/29
+ *
+ * History
+ * 1.0 & 1.1 2003 (CC) vojtech@suse.cz
+ * Original version for 2.4.x kernels
+ *
+ * 1.2 02/03/2005 (HCE) hc@mivu.no
+ * Complete rewrite to support Linux 2.6.10, thanks to mtouchusb.c for hints.
+ * Unfortunately no calibration support at this time.
+ *
+ * 1.2.1 09/03/2005 (HCE) hc@mivu.no
+ * Code cleanup and adjusting syntax to start matching kernel standards
+ *
+ *****************************************************************************/
+
+#include <linux/config.h>
+
+#ifdef CONFIG_USB_DEBUG
+ #define DEBUG
+#else
+ #undef DEBUG
+#endif
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+
+/* only an 8 byte buffer necessary for a single packet */
+#define ITM_BUFSIZE 8
+#define PATH_SIZE 64
+
+#define USB_VENDOR_ID_ITMINC 0x0403
+#define USB_PRODUCT_ID_TOUCHPANEL 0xf9e9
+
+#define DRIVER_AUTHOR "Hans-Christian Egtvedt <hc@mivu.no>"
+#define DRIVER_VERSION "v1.2.1"
+#define DRIVER_DESC "USB ITM Inc Touch Panel Driver"
+#define DRIVER_LICENSE "GPL"
+
+MODULE_AUTHOR( DRIVER_AUTHOR );
+MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_LICENSE( DRIVER_LICENSE );
+
+struct itmtouch_dev {
+ struct usb_device *usbdev; /* usb device */
+ struct input_dev inputdev; /* input device */
+ struct urb *readurb; /* urb */
+ char rbuf[ITM_BUFSIZE]; /* data */
+ int users;
+ char name[128];
+ char phys[64];
+};
+
+static struct usb_device_id itmtouch_ids [] = {
+ { USB_DEVICE(USB_VENDOR_ID_ITMINC, USB_PRODUCT_ID_TOUCHPANEL) },
+ { }
+};
+
+static void itmtouch_irq(struct urb *urb, struct pt_regs *regs)
+{
+ struct itmtouch_dev * itmtouch = urb->context;
+ unsigned char *data = urb->transfer_buffer;
+ struct input_dev *dev = &itmtouch->inputdev;
+ int retval;
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ETIMEDOUT:
+ /* this urb is timing out */
+ dbg("%s - urb timed out - was the device unplugged?",
+ __FUNCTION__);
+ return;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d",
+ __FUNCTION__, urb->status);
+ return;
+ default:
+ dbg("%s - nonzero urb status received: %d",
+ __FUNCTION__, urb->status);
+ goto exit;
+ }
+
+ input_regs(dev, regs);
+
+ /* if pressure has been released, then don't report X/Y */
+ if (data[7] & 0x20) {
+ input_report_abs(dev, ABS_X, (data[0] & 0x1F) << 7 | (data[3] & 0x7F));
+ input_report_abs(dev, ABS_Y, (data[1] & 0x1F) << 7 | (data[4] & 0x7F));
+ }
+
+ input_report_abs(dev, ABS_PRESSURE, (data[2] & 1) << 7 | (data[5] & 0x7F));
+ input_report_key(dev, BTN_TOUCH, ~data[7] & 0x20);
+ input_sync(dev);
+
+exit:
+ retval = usb_submit_urb (urb, GFP_ATOMIC);
+ if (retval)
+ printk(KERN_ERR "%s - usb_submit_urb failed with result: %d",
+ __FUNCTION__, retval);
+}
+
+static int itmtouch_open(struct input_dev *input)
+{
+ struct itmtouch_dev *itmtouch = input->private;
+
+ if (itmtouch->users++)
+ return 0;
+
+ itmtouch->readurb->dev = itmtouch->usbdev;
+
+ if (usb_submit_urb(itmtouch->readurb, GFP_KERNEL))
+ {
+ itmtouch->users--;
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void itmtouch_close(struct input_dev *input)
+{
+ struct itmtouch_dev *itmtouch = input->private;
+
+ if (!--itmtouch->users)
+ usb_kill_urb(itmtouch->readurb);
+}
+
+static int itmtouch_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct itmtouch_dev *itmtouch;
+ struct usb_host_interface *interface;
+ struct usb_endpoint_descriptor *endpoint;
+ struct usb_device *udev = interface_to_usbdev(intf);
+ unsigned int pipe;
+ unsigned int maxp;
+ char path[PATH_SIZE];
+
+ interface = intf->cur_altsetting;
+ endpoint = &interface->endpoint[0].desc;
+
+ if (!(itmtouch = kcalloc(1, sizeof(struct itmtouch_dev), GFP_KERNEL))) {
+ err("%s - Out of memory.", __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ itmtouch->usbdev = udev;
+
+ itmtouch->inputdev.private = itmtouch;
+ itmtouch->inputdev.open = itmtouch_open;
+ itmtouch->inputdev.close = itmtouch_close;
+
+ usb_make_path(udev, path, PATH_SIZE);
+
+ itmtouch->inputdev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ itmtouch->inputdev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
+ itmtouch->inputdev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+
+ itmtouch->inputdev.name = itmtouch->name;
+ itmtouch->inputdev.phys = itmtouch->phys;
+ itmtouch->inputdev.id.bustype = BUS_USB;
+ itmtouch->inputdev.id.vendor = udev->descriptor.idVendor;
+ itmtouch->inputdev.id.product = udev->descriptor.idProduct;
+ itmtouch->inputdev.id.version = udev->descriptor.bcdDevice;
+ itmtouch->inputdev.dev = &intf->dev;
+
+ if (!strlen(itmtouch->name))
+ sprintf(itmtouch->name, "USB ITM touchscreen");
+
+ /* device limits */
+ /* as specified by the ITM datasheet, X and Y are 12bit,
+ * Z (pressure) is 8 bit. However, the fields are defined up
+ * to 14 bits for future possible expansion.
+ */
+ input_set_abs_params(&itmtouch->inputdev, ABS_X, 0, 0x0FFF, 2, 0);
+ input_set_abs_params(&itmtouch->inputdev, ABS_Y, 0, 0x0FFF, 2, 0);
+ input_set_abs_params(&itmtouch->inputdev, ABS_PRESSURE, 0, 0xFF, 2, 0);
+
+ /* initialise the URB so we can read from the transport stream */
+ pipe = usb_rcvintpipe(itmtouch->usbdev, endpoint->bEndpointAddress);
+ maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+
+ if (maxp > ITM_BUFSIZE)
+ maxp = ITM_BUFSIZE;
+
+ itmtouch->readurb = usb_alloc_urb(0, GFP_KERNEL);
+
+ if (!itmtouch->readurb) {
+ dbg("%s - usb_alloc_urb failed: itmtouch->readurb", __FUNCTION__);
+ kfree(itmtouch);
+ return -ENOMEM;
+ }
+
+ usb_fill_int_urb(itmtouch->readurb,
+ itmtouch->usbdev,
+ pipe,
+ itmtouch->rbuf,
+ maxp,
+ itmtouch_irq,
+ itmtouch,
+ endpoint->bInterval);
+
+ input_register_device(&itmtouch->inputdev);
+
+ printk(KERN_INFO "itmtouch: %s registered on %s\n", itmtouch->name, path);
+ usb_set_intfdata(intf, itmtouch);
+
+ return 0;
+}
+
+static void itmtouch_disconnect(struct usb_interface *intf)
+{
+ struct itmtouch_dev *itmtouch = usb_get_intfdata(intf);
+
+ usb_set_intfdata(intf, NULL);
+
+ if (itmtouch) {
+ input_unregister_device(&itmtouch->inputdev);
+ usb_kill_urb(itmtouch->readurb);
+ usb_free_urb(itmtouch->readurb);
+ kfree(itmtouch);
+ }
+}
+
+MODULE_DEVICE_TABLE(usb, itmtouch_ids);
+
+static struct usb_driver itmtouch_driver = {
+ .owner = THIS_MODULE,
+ .name = "itmtouch",
+ .probe = itmtouch_probe,
+ .disconnect = itmtouch_disconnect,
+ .id_table = itmtouch_ids,
+};
+
+static int __init itmtouch_init(void)
+{
+ info(DRIVER_DESC " " DRIVER_VERSION);
+ info(DRIVER_AUTHOR);
+ return usb_register(&itmtouch_driver);
+}
+
+static void __exit itmtouch_exit(void)
+{
+ usb_deregister(&itmtouch_driver);
+}
+
+module_init(itmtouch_init);
+module_exit(itmtouch_exit);
projects / linux-2.6-omap-h63xx.git / commitdiff