#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/wait.h>
-#include <asm/io.h>
#include <asm/uaccess.h>
+#include <linux/i2c.h>
+#include <linux/videodev.h>
+#include <linux/video_decoder.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-i2c-drv-legacy.h>
MODULE_DESCRIPTION("Philips SAA7110 video decoder driver");
MODULE_AUTHOR("Pauline Middelink");
MODULE_LICENSE("GPL");
-#include <linux/i2c.h>
-
-#define I2C_NAME(s) (s)->name
-
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <linux/video_decoder.h>
-
static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
-#define dprintk(num, format, args...) \
- do { \
- if (debug >= num) \
- printk(format, ##args); \
- } while (0)
-
#define SAA7110_MAX_INPUT 9 /* 6 CVBS, 3 SVHS */
#define SAA7110_MAX_OUTPUT 0 /* its a decoder only */
-#define I2C_SAA7110 0x9C /* or 0x9E */
-
#define SAA7110_NR_REG 0x35
struct saa7110 {
/* I2C support functions */
/* ----------------------------------------------------------------------- */
-static int
-saa7110_write (struct i2c_client *client,
- u8 reg,
- u8 value)
+static int saa7110_write(struct i2c_client *client, u8 reg, u8 value)
{
struct saa7110 *decoder = i2c_get_clientdata(client);
return i2c_smbus_write_byte_data(client, reg, value);
}
-static int
-saa7110_write_block (struct i2c_client *client,
- const u8 *data,
- unsigned int len)
+static int saa7110_write_block(struct i2c_client *client, const u8 *data, unsigned int len)
{
int ret = -1;
u8 reg = *data; /* first register to write to */
memcpy(decoder->reg + reg, data + 1, len - 1);
} else {
for (++data, --len; len; len--) {
- if ((ret = saa7110_write(client, reg++,
- *data++)) < 0)
+ ret = saa7110_write(client, reg++, *data++);
+ if (ret < 0)
break;
}
}
return ret;
}
-static inline int
-saa7110_read (struct i2c_client *client)
+static inline int saa7110_read(struct i2c_client *client)
{
return i2c_smbus_read_byte(client);
}
#define FRESP_06H_SVIDEO 0x83 //0xC0
-static int
-saa7110_selmux (struct i2c_client *client,
- int chan)
+static int saa7110_selmux(struct i2c_client *client, int chan)
{
static const unsigned char modes[9][8] = {
/* mode 0 */
/* 0x30 */ 0x44, 0x71, 0x02, 0x8C, 0x02
};
-static int
-determine_norm (struct i2c_client *client)
+static int determine_norm(struct i2c_client *client)
{
DEFINE_WAIT(wait);
struct saa7110 *decoder = i2c_get_clientdata(client);
finish_wait(&decoder->wq, &wait);
status = saa7110_read(client);
if (status & 0x40) {
- dprintk(1, KERN_INFO "%s: status=0x%02x (no signal)\n",
- I2C_NAME(client), status);
+ v4l_dbg(1, debug, client, "status=0x%02x (no signal)\n", status);
return decoder->norm; // no change
}
if ((status & 3) == 0) {
saa7110_write(client, 0x06, 0x83);
if (status & 0x20) {
- dprintk(1,
- KERN_INFO
- "%s: status=0x%02x (NTSC/no color)\n",
- I2C_NAME(client), status);
+ v4l_dbg(1, debug, client, "status=0x%02x (NTSC/no color)\n", status);
//saa7110_write(client,0x2E,0x81);
return VIDEO_MODE_NTSC;
}
- dprintk(1, KERN_INFO "%s: status=0x%02x (PAL/no color)\n",
- I2C_NAME(client), status);
+ v4l_dbg(1, debug, client, "status=0x%02x (PAL/no color)\n", status);
//saa7110_write(client,0x2E,0x9A);
return VIDEO_MODE_PAL;
}
//saa7110_write(client,0x06,0x03);
if (status & 0x20) { /* 60Hz */
- dprintk(1, KERN_INFO "%s: status=0x%02x (NTSC)\n",
- I2C_NAME(client), status);
+ v4l_dbg(1, debug, client, "status=0x%02x (NTSC)\n", status);
saa7110_write(client, 0x0D, 0x86);
saa7110_write(client, 0x0F, 0x50);
saa7110_write(client, 0x11, 0x2C);
status = saa7110_read(client);
if ((status & 0x03) == 0x01) {
- dprintk(1, KERN_INFO "%s: status=0x%02x (SECAM)\n",
- I2C_NAME(client), status);
+ v4l_dbg(1, debug, client, "status=0x%02x (SECAM)\n", status);
saa7110_write(client, 0x0D, 0x87);
return VIDEO_MODE_SECAM;
}
- dprintk(1, KERN_INFO "%s: status=0x%02x (PAL)\n", I2C_NAME(client),
- status);
+ v4l_dbg(1, debug, client, "status=0x%02x (PAL)\n", status);
return VIDEO_MODE_PAL;
}
VIDEO_DECODER_SECAM | VIDEO_DECODER_AUTO;
dc->inputs = SAA7110_MAX_INPUT;
dc->outputs = SAA7110_MAX_OUTPUT;
- }
break;
+ }
case DECODER_GET_STATUS:
{
int res = 0;
status = saa7110_read(client);
- dprintk(1, KERN_INFO "%s: status=0x%02x norm=%d\n",
- I2C_NAME(client), status, decoder->norm);
+ v4l_dbg(1, debug, client, "status=0x%02x norm=%d\n",
+ status, decoder->norm);
if (!(status & 0x40))
res |= DECODER_STATUS_GOOD;
if (status & 0x03)
break;
}
*(int *) arg = res;
- }
break;
+ }
case DECODER_SET_NORM:
v = *(int *) arg;
saa7110_write(client, 0x0F, 0x50);
saa7110_write(client, 0x11, 0x2C);
//saa7110_write(client, 0x2E, 0x81);
- dprintk(1,
- KERN_INFO "%s: switched to NTSC\n",
- I2C_NAME(client));
+ v4l_dbg(1, debug, client, "switched to NTSC\n");
break;
case VIDEO_MODE_PAL:
saa7110_write(client, 0x0D, 0x86);
saa7110_write(client, 0x0F, 0x10);
saa7110_write(client, 0x11, 0x59);
//saa7110_write(client, 0x2E, 0x9A);
- dprintk(1,
- KERN_INFO "%s: switched to PAL\n",
- I2C_NAME(client));
+ v4l_dbg(1, debug, client, "switched to PAL\n");
break;
case VIDEO_MODE_SECAM:
saa7110_write(client, 0x0D, 0x87);
saa7110_write(client, 0x0F, 0x10);
saa7110_write(client, 0x11, 0x59);
//saa7110_write(client, 0x2E, 0x9A);
- dprintk(1,
- KERN_INFO
- "%s: switched to SECAM\n",
- I2C_NAME(client));
+ v4l_dbg(1, debug, client, "switched to SECAM\n");
break;
case VIDEO_MODE_AUTO:
- dprintk(1,
- KERN_INFO
- "%s: TV standard detection...\n",
- I2C_NAME(client));
+ v4l_dbg(1, debug, client, "switched to AUTO\n");
decoder->norm = determine_norm(client);
*(int *) arg = decoder->norm;
break;
case DECODER_SET_INPUT:
v = *(int *) arg;
if (v < 0 || v > SAA7110_MAX_INPUT) {
- dprintk(1,
- KERN_INFO "%s: input=%d not available\n",
- I2C_NAME(client), v);
+ v4l_dbg(1, debug, client, "input=%d not available\n", v);
return -EINVAL;
}
if (decoder->input != v) {
saa7110_selmux(client, v);
- dprintk(1, KERN_INFO "%s: switched to input=%d\n",
- I2C_NAME(client), v);
+ v4l_dbg(1, debug, client, "switched to input=%d\n", v);
}
break;
if (decoder->enable != v) {
decoder->enable = v;
saa7110_write(client, 0x0E, v ? 0x18 : 0x80);
- dprintk(1, KERN_INFO "%s: YUV %s\n", I2C_NAME(client),
- v ? "on" : "off");
+ v4l_dbg(1, debug, client, "YUV %s\n", v ? "on" : "off");
}
break;
saa7110_write(client, 0x07,
(decoder->hue >> 8) - 128);
}
- }
break;
+ }
case DECODER_DUMP:
+ if (!debug)
+ break;
for (v = 0; v < SAA7110_NR_REG; v += 16) {
int j;
- dprintk(1, KERN_DEBUG "%s: %02x:", I2C_NAME(client),
- v);
+ v4l_dbg(1, debug, client, "%02x:", v);
for (j = 0; j < 16 && v + j < SAA7110_NR_REG; j++)
- dprintk(1, " %02x", decoder->reg[v + j]);
- dprintk(1, "\n");
+ printk(KERN_CONT " %02x", decoder->reg[v + j]);
+ printk(KERN_CONT "\n");
}
break;
default:
- dprintk(1, KERN_INFO "unknown saa7110_command??(%d)\n",
- cmd);
+ v4l_dbg(1, debug, client, "unknown command %08x\n", cmd);
return -EINVAL;
}
return 0;
* Generic i2c probe
* concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
*/
-static unsigned short normal_i2c[] = {
- I2C_SAA7110 >> 1,
- (I2C_SAA7110 >> 1) + 1,
- I2C_CLIENT_END
-};
-
-static unsigned short ignore = I2C_CLIENT_END;
-static struct i2c_client_address_data addr_data = {
- .normal_i2c = normal_i2c,
- .probe = &ignore,
- .ignore = &ignore,
-};
+static unsigned short normal_i2c[] = { 0x9c >> 1, 0x9e >> 1, I2C_CLIENT_END };
-static struct i2c_driver i2c_driver_saa7110;
+I2C_CLIENT_INSMOD;
-static int
-saa7110_detect_client (struct i2c_adapter *adapter,
- int address,
- int kind)
+static int saa7110_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
struct saa7110 *decoder;
int rv;
- dprintk(1,
- KERN_INFO
- "saa7110.c: detecting saa7110 client on address 0x%x\n",
- address << 1);
-
/* Check if the adapter supports the needed features */
- if (!i2c_check_functionality
- (adapter,
- I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
- return 0;
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+ return -ENODEV;
- client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (!client)
- return -ENOMEM;
- client->addr = address;
- client->adapter = adapter;
- client->driver = &i2c_driver_saa7110;
- strlcpy(I2C_NAME(client), "saa7110", sizeof(I2C_NAME(client)));
+ v4l_info(client, "chip found @ 0x%x (%s)\n",
+ client->addr << 1, client->adapter->name);
decoder = kzalloc(sizeof(struct saa7110), GFP_KERNEL);
- if (!decoder) {
- kfree(client);
+ if (!decoder)
return -ENOMEM;
- }
decoder->norm = VIDEO_MODE_PAL;
decoder->input = 0;
decoder->enable = 1;
init_waitqueue_head(&decoder->wq);
i2c_set_clientdata(client, decoder);
- rv = i2c_attach_client(client);
- if (rv) {
- kfree(client);
- kfree(decoder);
- return rv;
- }
-
rv = saa7110_write_block(client, initseq, sizeof(initseq));
- if (rv < 0)
- dprintk(1, KERN_ERR "%s_attach: init status %d\n",
- I2C_NAME(client), rv);
- else {
+ if (rv < 0) {
+ v4l_dbg(1, debug, client, "init status %d\n", rv);
+ } else {
int ver, status;
saa7110_write(client, 0x21, 0x10);
saa7110_write(client, 0x0e, 0x18);
saa7110_write(client, 0x0D, 0x06);
//mdelay(150);
status = saa7110_read(client);
- dprintk(1,
- KERN_INFO
- "%s_attach: SAA7110A version %x at 0x%02x, status=0x%02x\n",
- I2C_NAME(client), ver, client->addr << 1, status);
+ v4l_dbg(1, debug, client, "version %x, status=0x%02x\n",
+ ver, status);
saa7110_write(client, 0x0D, 0x86);
saa7110_write(client, 0x0F, 0x10);
saa7110_write(client, 0x11, 0x59);
return 0;
}
-static int
-saa7110_attach_adapter (struct i2c_adapter *adapter)
-{
- dprintk(1,
- KERN_INFO
- "saa7110.c: starting probe for adapter %s (0x%x)\n",
- I2C_NAME(adapter), adapter->id);
- return i2c_probe(adapter, &addr_data, &saa7110_detect_client);
-}
-
-static int
-saa7110_detach_client (struct i2c_client *client)
+static int saa7110_remove(struct i2c_client *client)
{
- struct saa7110 *decoder = i2c_get_clientdata(client);
- int err;
-
- err = i2c_detach_client(client);
- if (err) {
- return err;
- }
-
- kfree(decoder);
- kfree(client);
-
+ kfree(i2c_get_clientdata(client));
return 0;
}
/* ----------------------------------------------------------------------- */
-static struct i2c_driver i2c_driver_saa7110 = {
- .driver = {
- .name = "saa7110",
- },
-
- .id = I2C_DRIVERID_SAA7110,
+static const struct i2c_device_id saa7110_id[] = {
+ { "saa7110", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, saa7110_id);
- .attach_adapter = saa7110_attach_adapter,
- .detach_client = saa7110_detach_client,
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
+ .name = "saa7110",
+ .driverid = I2C_DRIVERID_SAA7110,
.command = saa7110_command,
+ .probe = saa7110_probe,
+ .remove = saa7110_remove,
+ .id_table = saa7110_id,
};
-
-static int __init
-saa7110_init (void)
-{
- return i2c_add_driver(&i2c_driver_saa7110);
-}
-
-static void __exit
-saa7110_exit (void)
-{
- i2c_del_driver(&i2c_driver_saa7110);
-}
-
-module_init(saa7110_init);
-module_exit(saa7110_exit);
projects / linux-2.6-omap-h63xx.git / commitdiff