static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
+static unsigned int audiodev[BTTV_MAX];
+static unsigned int saa6588[BTTV_MAX];
static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
-#ifdef MODULE
-static unsigned int autoload = 1;
-#else
-static unsigned int autoload;
-#endif
+static unsigned int autoload = UNSET;
static unsigned int gpiomask = UNSET;
static unsigned int audioall = UNSET;
static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
module_param_array(tuner, int, NULL, 0444);
module_param_array(svhs, int, NULL, 0444);
module_param_array(remote, int, NULL, 0444);
+module_param_array(audiodev, int, NULL, 0444);
module_param_array(audiomux, int, NULL, 0444);
MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
MODULE_PARM_DESC(tuner,"specify installed tuner type");
-MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
+MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
+MODULE_PARM_DESC(audiodev, "specify audio device:\n"
+ "\t\t-1 = no audio\n"
+ "\t\t 0 = autodetect (default)\n"
+ "\t\t 1 = msp3400\n"
+ "\t\t 2 = tda7432\n"
+ "\t\t 3 = tvaudio");
+MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
" [some VIA/SIS chipsets are known to have problem with overlay]");
/* initialization part two -- after registering i2c bus */
void __devinit bttv_init_card2(struct bttv *btv)
{
+ static const unsigned short tvaudio_addrs[] = {
+ I2C_ADDR_TDA8425 >> 1,
+ I2C_ADDR_TEA6300 >> 1,
+ I2C_ADDR_TEA6420 >> 1,
+ I2C_ADDR_TDA9840 >> 1,
+ I2C_ADDR_TDA985x_L >> 1,
+ I2C_ADDR_TDA985x_H >> 1,
+ I2C_ADDR_TDA9874 >> 1,
+ I2C_ADDR_PIC16C54 >> 1,
+ I2C_CLIENT_END
+ };
int addr=ADDR_UNSET;
btv->tuner_type = UNSET;
printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
btv->tuner_type);
+ if (autoload != UNSET) {
+ printk(KERN_WARNING "bttv%d: the autoload option is obsolete.\n", btv->c.nr);
+ printk(KERN_WARNING "bttv%d: use option msp3400, tda7432 or tvaudio to\n", btv->c.nr);
+ printk(KERN_WARNING "bttv%d: override which audio module should be used.\n", btv->c.nr);
+ }
+
if (UNSET == btv->tuner_type)
btv->tuner_type = TUNER_ABSENT;
struct tuner_setup tun_setup;
/* Load tuner module before issuing tuner config call! */
- if (autoload)
- request_module("tuner");
+ if (bttv_tvcards[btv->c.type].has_radio)
+ v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+ "tuner", "tuner", v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+ v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap, "tuner",
+ "tuner", v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+ v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap, "tuner",
+ "tuner", v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
tun_setup.type = btv->tuner_type;
if (bttv_tvcards[btv->c.type].has_radio)
tun_setup.mode_mask |= T_RADIO;
- bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
+ bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
}
if (btv->tda9887_conf) {
tda9887_cfg.tuner = TUNER_TDA9887;
tda9887_cfg.priv = &btv->tda9887_conf;
- bttv_call_i2c_clients(btv, TUNER_SET_CONFIG, &tda9887_cfg);
+ bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
}
btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
if (bttv_tvcards[btv->c.type].audio_mode_gpio)
btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
- if (!autoload)
- return;
-
if (btv->tuner_type == TUNER_ABSENT)
return; /* no tuner or related drivers to load */
+ if (btv->has_saa6588 || saa6588[btv->c.nr]) {
+ /* Probe for RDS receiver chip */
+ static const unsigned short addrs[] = {
+ 0x20 >> 1,
+ 0x22 >> 1,
+ I2C_CLIENT_END
+ };
+ struct v4l2_subdev *sd;
+
+ sd = v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+ "saa6588", "saa6588", addrs);
+ btv->has_saa6588 = (sd != NULL);
+ }
+
/* try to detect audio/fader chips */
- if (!bttv_tvcards[btv->c.type].no_msp34xx &&
- bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
- request_module("msp3400");
- if (bttv_tvcards[btv->c.type].msp34xx_alt &&
- bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
- request_module("msp3400");
+ /* First check if the user specified the audio chip via a module
+ option. */
+
+ switch (audiodev[btv->c.nr]) {
+ case -1:
+ return; /* do not load any audio module */
+
+ case 0: /* autodetect */
+ break;
+
+ case 1: {
+ /* The user specified that we should probe for msp3400 */
+ static const unsigned short addrs[] = {
+ I2C_ADDR_MSP3400 >> 1,
+ I2C_ADDR_MSP3400_ALT >> 1,
+ I2C_CLIENT_END
+ };
+
+ btv->sd_msp34xx = v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+ "msp3400", "msp3400", addrs);
+ if (btv->sd_msp34xx)
+ return;
+ goto no_audio;
+ }
+
+ case 2: {
+ /* The user specified that we should probe for tda7432 */
+ static const unsigned short addrs[] = {
+ I2C_ADDR_TDA7432 >> 1,
+ I2C_CLIENT_END
+ };
+
+ if (v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+ "tda7432", "tda7432", addrs))
+ return;
+ goto no_audio;
+ }
- if (!bttv_tvcards[btv->c.type].no_tda9875 &&
- bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
- request_module("tda9875");
+ case 3: {
+ /* The user specified that we should probe for tvaudio */
+ btv->sd_tvaudio = v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+ "tvaudio", "tvaudio", tvaudio_addrs);
+ if (btv->sd_tvaudio)
+ return;
+ goto no_audio;
+ }
- if (!bttv_tvcards[btv->c.type].no_tda7432 &&
- bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
- request_module("tda7432");
+ default:
+ printk(KERN_WARNING "bttv%d: unknown audiodev value!\n",
+ btv->c.nr);
+ return;
+ }
+
+ /* There were no overrides, so now we try to discover this through the
+ card definition */
+
+ /* probe for msp3400 first: this driver can detect whether or not
+ it really is a msp3400, so it will return NULL when the device
+ found is really something else (e.g. a tea6300). */
+ if (!bttv_tvcards[btv->c.type].no_msp34xx) {
+ static const unsigned short addrs[] = {
+ I2C_ADDR_MSP3400 >> 1,
+ I2C_CLIENT_END
+ };
+
+ btv->sd_msp34xx = v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+ "msp3400", "msp3400", addrs);
+ } else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
+ static const unsigned short addrs[] = {
+ I2C_ADDR_MSP3400_ALT >> 1,
+ I2C_CLIENT_END
+ };
+
+ btv->sd_msp34xx = v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+ "msp3400", "msp3400", addrs);
+ }
+
+ /* If we found a msp34xx, then we're done. */
+ if (btv->sd_msp34xx)
+ return;
+
+ /* it might also be a tda7432. */
+ if (!bttv_tvcards[btv->c.type].no_tda7432) {
+ static const unsigned short addrs[] = {
+ I2C_ADDR_TDA7432 >> 1,
+ I2C_CLIENT_END
+ };
+
+ if (v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+ "tda7432", "tda7432", addrs))
+ return;
+ }
+
+ /* Now see if we can find one of the tvaudio devices. */
+ btv->sd_tvaudio = v4l2_i2c_new_probed_subdev(&btv->c.i2c_adap,
+ "tvaudio", "tvaudio", tvaudio_addrs);
+ if (btv->sd_tvaudio)
+ return;
- if (bttv_tvcards[btv->c.type].needs_tvaudio)
- request_module("tvaudio");
+no_audio:
+ printk(KERN_WARNING "bttv%d: audio absent, no audio device found!\n",
+ btv->c.nr);
}
printk("bttv%d: Terratec Active Radio Upgrade found.\n",
btv->c.nr);
btv->has_radio = 1;
+ btv->has_saa6588 = 1;
btv->has_matchbox = 1;
} else {
btv->has_radio = 0;
{
int gpio_val, signal;
struct v4l2_control ctrl;
- struct i2c_client *c;
gpio_inout(bttv_tvcards[btv->c.type].gpiomask,
bttv_tvcards[btv->c.type].gpiomask);
ctrl.id = V4L2_CID_AUDIO_MUTE;
ctrl.value = btv->mute;
- bttv_call_i2c_clients(btv, VIDIOC_S_CTRL, &ctrl);
- c = btv->i2c_msp34xx_client;
- if (c) {
+ bttv_call_all(btv, core, s_ctrl, &ctrl);
+ if (btv->sd_msp34xx) {
struct v4l2_routing route;
/* Note: the inputs tuner/radio/extern/intern are translated
break;
}
route.output = MSP_OUTPUT_DEFAULT;
- c->driver->command(c, VIDIOC_INT_S_AUDIO_ROUTING, &route);
+ v4l2_subdev_call(btv->sd_msp34xx, audio, s_routing, &route);
}
- c = btv->i2c_tvaudio_client;
- if (c) {
+ if (btv->sd_tvaudio) {
struct v4l2_routing route;
route.input = input;
route.output = 0;
- c->driver->command(c, VIDIOC_INT_S_AUDIO_ROUTING, &route);
+ v4l2_subdev_call(btv->sd_tvaudio, audio, s_routing, &route);
}
return 0;
}
break;
}
id = tvnorm->v4l2_id;
- bttv_call_i2c_clients(btv, VIDIOC_S_STD, &id);
+ bttv_call_all(btv, tuner, s_std, id);
return 0;
}
case V4L2_CID_AUDIO_BALANCE:
case V4L2_CID_AUDIO_BASS:
case V4L2_CID_AUDIO_TREBLE:
- bttv_call_i2c_clients(btv, VIDIOC_G_CTRL, c);
+ bttv_call_all(btv, core, g_ctrl, c);
break;
case V4L2_CID_PRIVATE_CHROMA_AGC:
if (btv->volume_gpio)
btv->volume_gpio(btv, c->value);
- bttv_call_i2c_clients(btv, VIDIOC_S_CTRL, c);
+ bttv_call_all(btv, core, s_ctrl, c);
break;
case V4L2_CID_AUDIO_BALANCE:
case V4L2_CID_AUDIO_BASS:
case V4L2_CID_AUDIO_TREBLE:
- bttv_call_i2c_clients(btv, VIDIOC_S_CTRL, c);
+ bttv_call_all(btv, core, s_ctrl, c);
break;
case V4L2_CID_PRIVATE_CHROMA_AGC:
return -EINVAL;
mutex_lock(&btv->lock);
- bttv_call_i2c_clients(btv, VIDIOC_S_TUNER, t);
+ bttv_call_all(btv, tuner, s_tuner, t);
if (btv->audio_mode_gpio)
btv->audio_mode_gpio(btv, t, 1);
return -EINVAL;
mutex_lock(&btv->lock);
btv->freq = f->frequency;
- bttv_call_i2c_clients(btv, VIDIOC_S_FREQUENCY, f);
+ bttv_call_all(btv, tuner, s_frequency, f);
if (btv->has_matchbox && btv->radio_user)
tea5757_set_freq(btv, btv->freq);
mutex_unlock(&btv->lock);
printk(KERN_INFO "bttv%d: ======== START STATUS CARD #%d ========\n",
btv->c.nr, btv->c.nr);
- bttv_call_i2c_clients(btv, VIDIOC_LOG_STATUS, NULL);
+ bttv_call_all(btv, core, log_status);
printk(KERN_INFO "bttv%d: ======== END STATUS CARD #%d ========\n",
btv->c.nr, btv->c.nr);
return 0;
mutex_lock(&btv->lock);
t->rxsubchans = V4L2_TUNER_SUB_MONO;
- bttv_call_i2c_clients(btv, VIDIOC_G_TUNER, t);
+ bttv_call_all(btv, tuner, g_tuner, t);
strcpy(t->name, "Television");
t->capability = V4L2_TUNER_CAP_NORM;
t->type = V4L2_TUNER_ANALOG_TV;
btv->radio_user++;
- bttv_call_i2c_clients(btv,AUDC_SET_RADIO,NULL);
+ bttv_call_all(btv, tuner, s_radio);
audio_input(btv,TVAUDIO_INPUT_RADIO);
mutex_unlock(&btv->lock);
btv->radio_user--;
- bttv_call_i2c_clients(btv, RDS_CMD_CLOSE, &cmd);
+ bttv_call_all(btv, core, ioctl, RDS_CMD_CLOSE, &cmd);
return 0;
}
strcpy(t->name, "Radio");
t->type = V4L2_TUNER_RADIO;
- bttv_call_i2c_clients(btv, VIDIOC_G_TUNER, t);
+ bttv_call_all(btv, tuner, g_tuner, t);
if (btv->audio_mode_gpio)
btv->audio_mode_gpio(btv, t, 0);
if (0 != t->index)
return -EINVAL;
- bttv_call_i2c_clients(btv, VIDIOC_G_TUNER, t);
+ bttv_call_all(btv, tuner, g_tuner, t);
return 0;
}
cmd.instance = file;
cmd.result = -ENODEV;
- bttv_call_i2c_clients(btv, RDS_CMD_READ, &cmd);
+ bttv_call_all(btv, core, ioctl, RDS_CMD_READ, &cmd);
return cmd.result;
}
cmd.instance = file;
cmd.event_list = wait;
cmd.result = -ENODEV;
- bttv_call_i2c_clients(btv, RDS_CMD_POLL, &cmd);
+ bttv_call_all(btv, core, ioctl, RDS_CMD_POLL, &cmd);
return cmd.result;
}
#include <linux/jiffies.h>
#include <asm/io.h>
-static int attach_inform(struct i2c_client *client);
-
static int i2c_debug;
static int i2c_hw;
static int i2c_scan;
/* ----------------------------------------------------------------------- */
/* I2C functions - common stuff */
-static int attach_inform(struct i2c_client *client)
-{
- struct v4l2_device *v4l2_dev = i2c_get_adapdata(client->adapter);
- struct bttv *btv = to_bttv(v4l2_dev);
- int addr=ADDR_UNSET;
-
-
- if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
- addr = bttv_tvcards[btv->c.type].tuner_addr;
-
-
- if (bttv_debug)
- printk(KERN_DEBUG "bttv%d: %s i2c attach [addr=0x%x,client=%s]\n",
- btv->c.nr, client->driver->driver.name, client->addr,
- client->name);
- if (!client->driver->command)
- return 0;
-
- if (client->driver->id == I2C_DRIVERID_MSP3400)
- btv->i2c_msp34xx_client = client;
- if (client->driver->id == I2C_DRIVERID_TVAUDIO)
- btv->i2c_tvaudio_client = client;
- if (btv->tuner_type != TUNER_ABSENT) {
- struct tuner_setup tun_setup;
-
- if (addr == ADDR_UNSET || addr == client->addr) {
- tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV | T_RADIO;
- tun_setup.type = btv->tuner_type;
- tun_setup.addr = addr;
- bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
- }
-
- }
-
- return 0;
-}
-
-void bttv_call_i2c_clients(struct bttv *btv, unsigned int cmd, void *arg)
-{
- if (0 != btv->i2c_rc)
- return;
- i2c_clients_command(&btv->c.i2c_adap, cmd, arg);
-}
-
-
/* read I2C */
int bttv_I2CRead(struct bttv *btv, unsigned char addr, char *probe_for)
{
btv->c.i2c_adap.algo_data = &btv->i2c_algo;
}
btv->c.i2c_adap.owner = THIS_MODULE;
- btv->c.i2c_adap.class = I2C_CLASS_TV_ANALOG;
- btv->c.i2c_adap.client_register = attach_inform;
btv->c.i2c_adap.dev.parent = &btv->c.pci->dev;
snprintf(btv->c.i2c_adap.name, sizeof(btv->c.i2c_adap.name),
i2c_set_adapdata(&btv->c.i2c_adap, &btv->c.v4l2_dev);
btv->i2c_client.adapter = &btv->c.i2c_adap;
- if (bttv_tvcards[btv->c.type].no_video)
- btv->c.i2c_adap.class &= ~I2C_CLASS_TV_ANALOG;
- if (bttv_tvcards[btv->c.type].has_dvb)
- btv->c.i2c_adap.class |= I2C_CLASS_TV_DIGITAL;
if (btv->use_i2c_hw) {
btv->i2c_rc = i2c_add_adapter(&btv->c.i2c_adap);
unsigned int no_tda7432:1;
unsigned int needs_tvaudio:1;
unsigned int msp34xx_alt:1;
+ /* Note: currently no card definition needs to mark the presence
+ of a RDS saa6588 chip. If this is ever needed, then add a new
+ 'has_saa6588' bit here. */
unsigned int no_video:1; /* video pci function is unused */
unsigned int has_dvb:1;
/* ---------------------------------------------------------- */
/* i2c */
-extern void bttv_call_i2c_clients(struct bttv *btv, unsigned int cmd, void *arg);
+#define bttv_call_all(btv, o, f, args...) \
+ v4l2_device_call_all(&btv->c.v4l2_dev, 0, o, f, ##args)
+
extern int bttv_I2CRead(struct bttv *btv, unsigned char addr, char *probe_for);
extern int bttv_I2CWrite(struct bttv *btv, unsigned char addr, unsigned char b1,
unsigned char b2, int both);
unsigned int tuner_type; /* tuner chip type */
unsigned int tda9887_conf;
unsigned int svhs, dig;
+ unsigned int has_saa6588:1;
struct bttv_pll_info pll;
int triton1;
int gpioirq;
int i2c_state, i2c_rc;
int i2c_done;
wait_queue_head_t i2c_queue;
- struct i2c_client *i2c_msp34xx_client;
- struct i2c_client *i2c_tvaudio_client;
+ struct v4l2_subdev *sd_msp34xx;
+ struct v4l2_subdev *sd_tvaudio;
/* video4linux (1) */
struct video_device *video_dev;
projects / linux-2.6-omap-h63xx.git / commitdiff