*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/major.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/signal.h>
#include <linux/types.h>
-#include <linux/i2c.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
+#include <linux/ioctl.h>
#include <asm/uaccess.h>
-
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
#include <linux/videodev.h>
#include <linux/video_decoder.h>
-
+#include <media/v4l2-common.h>
+#include <media/v4l2-i2c-drv-legacy.h>
MODULE_DESCRIPTION("Brooktree-819 video decoder driver");
MODULE_AUTHOR("Mike Bernson & Dave Perks");
MODULE_LICENSE("GPL");
-
-#define I2C_NAME(s) (s)->name
-
-
static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
-#define dprintk(num, format, args...) \
- do { \
- if (debug >= num) \
- printk(format, ##args); \
- } while (0)
-
/* ----------------------------------------------------------------------- */
struct bt819 {
{858 - 24, 20, 525 - 2, 1, 0x00f8, 0x0000},
};
-#define I2C_BT819 0x8a
-
/* ----------------------------------------------------------------------- */
-static inline int
-bt819_write (struct i2c_client *client,
- u8 reg,
- u8 value)
+static inline int bt819_write(struct i2c_client *client, u8 reg, u8 value)
{
struct bt819 *decoder = i2c_get_clientdata(client);
return i2c_smbus_write_byte_data(client, reg, value);
}
-static inline int
-bt819_setbit (struct i2c_client *client,
- u8 reg,
- u8 bit,
- u8 value)
+static inline int bt819_setbit(struct i2c_client *client, u8 reg, u8 bit, u8 value)
{
struct bt819 *decoder = i2c_get_clientdata(client);
return bt819_write(client, reg,
- (decoder->
- reg[reg] & ~(1 << bit)) |
- (value ? (1 << bit) : 0));
+ (decoder->reg[reg] & ~(1 << bit)) | (value ? (1 << bit) : 0));
}
-static int
-bt819_write_block (struct i2c_client *client,
- const u8 *data,
- unsigned int len)
+static int bt819_write_block(struct i2c_client *client, const u8 *data, unsigned int len)
{
int ret = -1;
u8 reg;
decoder->reg[reg++] = data[1];
len -= 2;
data += 2;
- } while (len >= 2 && data[0] == reg &&
- block_len < 32);
- if ((ret = i2c_master_send(client, block_data,
- block_len)) < 0)
+ } while (len >= 2 && data[0] == reg && block_len < 32);
+ ret = i2c_master_send(client, block_data, block_len);
+ if (ret < 0)
break;
}
} else {
return ret;
}
-static inline int
-bt819_read (struct i2c_client *client,
- u8 reg)
+static inline int bt819_read(struct i2c_client *client, u8 reg)
{
return i2c_smbus_read_byte_data(client, reg);
}
-static int
-bt819_init (struct i2c_client *client)
+static int bt819_init(struct i2c_client *client)
{
struct bt819 *decoder = i2c_get_clientdata(client);
static unsigned char init[] = {
- //0x1f, 0x00, /* Reset */
+ /*0x1f, 0x00,*/ /* Reset */
0x01, 0x59, /* 0x01 input format */
0x02, 0x00, /* 0x02 temporal decimation */
0x03, 0x12, /* 0x03 Cropping msb */
struct timing *timing = &timing_data[decoder->norm];
init[0x03 * 2 - 1] =
- (((timing->vdelay >> 8) & 0x03) << 6) | (((timing->
- vactive >> 8) &
- 0x03) << 4) |
- (((timing->hdelay >> 8) & 0x03) << 2) | ((timing->
- hactive >> 8) &
- 0x03);
+ (((timing->vdelay >> 8) & 0x03) << 6) |
+ (((timing->vactive >> 8) & 0x03) << 4) |
+ (((timing->hdelay >> 8) & 0x03) << 2) |
+ ((timing->hactive >> 8) & 0x03);
init[0x04 * 2 - 1] = timing->vdelay & 0xff;
init[0x05 * 2 - 1] = timing->vactive & 0xff;
init[0x06 * 2 - 1] = timing->hdelay & 0xff;
/* init */
return bt819_write_block(client, init, sizeof(init));
-
}
/* ----------------------------------------------------------------------- */
-static int
-bt819_command (struct i2c_client *client,
- unsigned int cmd,
- void *arg)
+static int bt819_command(struct i2c_client *client, unsigned cmd, void *arg)
{
int temp;
struct bt819 *decoder = i2c_get_clientdata(client);
- if (!decoder->initialized) { // First call to bt819_init could be
- bt819_init(client); // without #FRST = 0
+ if (!decoder->initialized) { /* First call to bt819_init could be */
+ bt819_init(client); /* without #FRST = 0 */
decoder->initialized = 1;
}
switch (cmd) {
-
case 0:
/* This is just for testing!!! */
bt819_init(client);
VIDEO_DECODER_CCIR;
cap->inputs = 8;
cap->outputs = 1;
- }
break;
+ }
case DECODER_GET_STATUS:
{
status = bt819_read(client, 0x00);
res = 0;
- if ((status & 0x80)) {
+ if ((status & 0x80))
res |= DECODER_STATUS_GOOD;
- }
+
switch (decoder->norm) {
case VIDEO_MODE_NTSC:
res |= DECODER_STATUS_NTSC;
break;
default:
case VIDEO_MODE_AUTO:
- if ((status & 0x10)) {
+ if ((status & 0x10))
res |= DECODER_STATUS_PAL;
- } else {
+ else
res |= DECODER_STATUS_NTSC;
- }
break;
}
res |= DECODER_STATUS_COLOR;
*iarg = res;
- dprintk(1, KERN_INFO "%s: get status %x\n", I2C_NAME(client),
- *iarg);
- }
+ v4l_dbg(1, debug, client, "get status %x\n", *iarg);
break;
+ }
case DECODER_SET_NORM:
{
int *iarg = arg;
struct timing *timing = NULL;
- dprintk(1, KERN_INFO "%s: set norm %x\n", I2C_NAME(client),
- *iarg);
+ v4l_dbg(1, debug, client, "set norm %x\n", *iarg);
switch (*iarg) {
case VIDEO_MODE_NTSC:
bt819_setbit(client, 0x01, 5, 0);
bt819_write(client, 0x18, 0x68);
bt819_write(client, 0x19, 0x5d);
- //bt819_setbit(client, 0x1a, 5, 1);
+ /* bt819_setbit(client, 0x1a, 5, 1); */
timing = &timing_data[VIDEO_MODE_NTSC];
break;
case VIDEO_MODE_PAL:
bt819_setbit(client, 0x01, 5, 1);
bt819_write(client, 0x18, 0x7f);
bt819_write(client, 0x19, 0x72);
- //bt819_setbit(client, 0x1a, 5, 0);
+ /* bt819_setbit(client, 0x1a, 5, 0); */
timing = &timing_data[VIDEO_MODE_PAL];
break;
case VIDEO_MODE_AUTO:
bt819_setbit(client, 0x01, 1, 0);
break;
default:
- dprintk(1,
- KERN_ERR
- "%s: unsupported norm %d\n",
- I2C_NAME(client), *iarg);
+ v4l_dbg(1, debug, client, "unsupported norm %x\n", *iarg);
return -EINVAL;
}
}
decoder->norm = *iarg;
- }
break;
+ }
case DECODER_SET_INPUT:
{
int *iarg = arg;
- dprintk(1, KERN_INFO "%s: set input %x\n", I2C_NAME(client),
- *iarg);
+ v4l_dbg(1, debug, client, "set input %x\n", *iarg);
- if (*iarg < 0 || *iarg > 7) {
+ if (*iarg < 0 || *iarg > 7)
return -EINVAL;
- }
if (decoder->input != *iarg) {
decoder->input = *iarg;
bt819_setbit(client, 0x1a, 1, 0);
}
}
- }
break;
+ }
case DECODER_SET_OUTPUT:
{
int *iarg = arg;
- dprintk(1, KERN_INFO "%s: set output %x\n", I2C_NAME(client),
- *iarg);
+ v4l_dbg(1, debug, client, "set output %x\n", *iarg);
/* not much choice of outputs */
- if (*iarg != 0) {
+ if (*iarg != 0)
return -EINVAL;
- }
- }
break;
+ }
case DECODER_ENABLE_OUTPUT:
{
int *iarg = arg;
int enable = (*iarg != 0);
- dprintk(1, KERN_INFO "%s: enable output %x\n",
- I2C_NAME(client), *iarg);
+ v4l_dbg(1, debug, client, "enable output %x\n", *iarg);
if (decoder->enable != enable) {
decoder->enable = enable;
-
- if (decoder->enable) {
- bt819_setbit(client, 0x16, 7, 0);
- } else {
- bt819_setbit(client, 0x16, 7, 1);
- }
+ bt819_setbit(client, 0x16, 7, !enable);
}
- }
break;
+ }
case DECODER_SET_PICTURE:
{
struct video_picture *pic = arg;
- dprintk(1,
- KERN_INFO
- "%s: set picture brightness %d contrast %d colour %d\n",
- I2C_NAME(client), pic->brightness, pic->contrast,
- pic->colour);
+ v4l_dbg(1, debug, client,
+ "set picture brightness %d contrast %d colour %d\n",
+ pic->brightness, pic->contrast, pic->colour);
if (decoder->bright != pic->brightness) {
bt819_write(client, 0x0f,
128 - (decoder->hue >> 8));
}
- }
break;
+ }
default:
return -EINVAL;
/* ----------------------------------------------------------------------- */
-/*
- * Generic i2c probe
- * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
- */
-static unsigned short normal_i2c[] = {
- I2C_BT819 >> 1,
- I2C_CLIENT_END,
-};
-
-static unsigned short ignore = I2C_CLIENT_END;
-
-static struct i2c_client_address_data addr_data = {
- .normal_i2c = normal_i2c,
- .probe = &ignore,
- .ignore = &ignore,
-};
+static unsigned short normal_i2c[] = { 0x8a >> 1, I2C_CLIENT_END };
-static struct i2c_driver i2c_driver_bt819;
+I2C_CLIENT_INSMOD;
-static int
-bt819_detect_client (struct i2c_adapter *adapter,
- int address,
- int kind)
+static int bt819_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- int i, id;
+ int i, ver;
struct bt819 *decoder;
- struct i2c_client *client;
-
- dprintk(1,
- KERN_INFO
- "bt819: detecting bt819 client on address 0x%x\n",
- address << 1);
+ const char *name;
/* Check if the adapter supports the needed features */
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return 0;
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
- client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (!client)
- return -ENOMEM;
- client->addr = address;
- client->adapter = adapter;
- client->driver = &i2c_driver_bt819;
+ ver = bt819_read(client, 0x17);
+ switch (ver & 0xf0) {
+ case 0x70:
+ name = "bt819a";
+ break;
+ case 0x60:
+ name = "bt817a";
+ break;
+ case 0x20:
+ name = "bt815a";
+ break;
+ default:
+ v4l_dbg(1, debug, client,
+ "unknown chip version 0x%02x\n", ver);
+ return -ENODEV;
+ }
+
+ v4l_info(client, "%s found @ 0x%x (%s)\n", name,
+ client->addr << 1, client->adapter->name);
decoder = kzalloc(sizeof(struct bt819), GFP_KERNEL);
- if (decoder == NULL) {
- kfree(client);
+ if (decoder == NULL)
return -ENOMEM;
- }
decoder->norm = VIDEO_MODE_NTSC;
decoder->input = 0;
decoder->enable = 1;
decoder->initialized = 0;
i2c_set_clientdata(client, decoder);
- id = bt819_read(client, 0x17);
- switch (id & 0xf0) {
- case 0x70:
- strlcpy(I2C_NAME(client), "bt819a", sizeof(I2C_NAME(client)));
- break;
- case 0x60:
- strlcpy(I2C_NAME(client), "bt817a", sizeof(I2C_NAME(client)));
- break;
- case 0x20:
- strlcpy(I2C_NAME(client), "bt815a", sizeof(I2C_NAME(client)));
- break;
- default:
- dprintk(1,
- KERN_ERR
- "bt819: unknown chip version 0x%x (ver 0x%x)\n",
- id & 0xf0, id & 0x0f);
- kfree(decoder);
- kfree(client);
- return 0;
- }
-
- i = i2c_attach_client(client);
- if (i) {
- kfree(client);
- kfree(decoder);
- return i;
- }
-
i = bt819_init(client);
- if (i < 0) {
- dprintk(1, KERN_ERR "%s_attach: init status %d\n",
- I2C_NAME(client), i);
- } else {
- dprintk(1,
- KERN_INFO
- "%s_attach: chip version 0x%x at address 0x%x\n",
- I2C_NAME(client), id & 0x0f,
- client->addr << 1);
- }
-
+ if (i < 0)
+ v4l_dbg(1, debug, client, "init status %d\n", i);
return 0;
}
-static int
-bt819_attach_adapter (struct i2c_adapter *adapter)
-{
- return i2c_probe(adapter, &addr_data, &bt819_detect_client);
-}
-
-static int
-bt819_detach_client (struct i2c_client *client)
+static int bt819_remove(struct i2c_client *client)
{
- struct bt819 *decoder = i2c_get_clientdata(client);
- int err;
-
- err = i2c_detach_client(client);
- if (err) {
- return err;
- }
-
- kfree(decoder);
- kfree(client);
-
+ kfree(i2c_get_clientdata(client));
return 0;
}
/* ----------------------------------------------------------------------- */
-static struct i2c_driver i2c_driver_bt819 = {
- .driver = {
- .name = "bt819",
- },
-
- .id = I2C_DRIVERID_BT819,
+static const struct i2c_device_id bt819_id[] = {
+ { "bt819a", 0 },
+ { "bt817a", 0 },
+ { "bt815a", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, bt819_id);
- .attach_adapter = bt819_attach_adapter,
- .detach_client = bt819_detach_client,
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
+ .name = "bt819",
+ .driverid = I2C_DRIVERID_BT819,
.command = bt819_command,
+ .probe = bt819_probe,
+ .remove = bt819_remove,
+ .id_table = bt819_id,
};
-
-static int __init
-bt819_init_module (void)
-{
- return i2c_add_driver(&i2c_driver_bt819);
-}
-
-static void __exit
-bt819_exit (void)
-{
- i2c_del_driver(&i2c_driver_bt819);
-}
-
-module_init(bt819_init_module);
-module_exit(bt819_exit);
projects / linux-2.6-omap-h63xx.git / commitdiff