]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
OMAP: I2C: convert 'rev1' flag to generic 'rev' u8
authorPaul Walmsley <paul@pwsan.com>
Tue, 14 Oct 2008 12:19:26 +0000 (06:19 -0600)
committerTony Lindgren <tony@atomide.com>
Fri, 21 Nov 2008 21:32:19 +0000 (13:32 -0800)
i2c-omap discriminates only between "revision 1" or "greater than
revision 1."  A following patch introduces code that must also
discriminate between rev2.x, rev3.6, and rev3.12 controllers.  Support
this by storing the full revision data from the I2C_REV register, rather
than just a single bit.

The revision definitions may need to be extended for other ES levels
that aren't currently available here.  rev3.6 is what's present on the
2430SDP here (unknown ES revision); rev3.12 is used on the 3430ES2
here.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
drivers/i2c/busses/i2c-omap.c

index 40a1e4bc92f189b8127f6ae38a4f90a12b83282f..3ac510d9c9ba81741f81fd4ec1a01116d4bd1b11 100644 (file)
 #include <linux/clk.h>
 #include <linux/io.h>
 
+/* I2C controller revisions */
+#define OMAP_I2C_REV_2                 0x20
+
+/* I2C controller revisions present on specific hardware */
+#define OMAP_I2C_REV_ON_2430           0x36
+#define OMAP_I2C_REV_ON_3430           0x3C
+
 /* timeout waiting for the controller to respond */
 #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
 
@@ -139,7 +146,7 @@ struct omap_i2c_dev {
                                                 * fifo_size==0 implies no fifo
                                                 * if set, should be trsh+1
                                                 */
-       unsigned                rev1:1;
+       u8                      rev;
        unsigned                b_hw:1;         /* bad h/w fixes */
        unsigned                idle:1;
        u16                     iestate;        /* Saved interrupt register */
@@ -209,7 +216,7 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
 
        dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
        omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
-       if (dev->rev1) {
+       if (dev->rev < OMAP_I2C_REV_2) {
                iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
        } else {
                omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
@@ -231,7 +238,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
        unsigned long timeout;
        unsigned long internal_clk = 0;
 
-       if (!dev->rev1) {
+       if (dev->rev >= OMAP_I2C_REV_2) {
                omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, OMAP_I2C_SYSC_SRST);
                /* For some reason we need to set the EN bit before the
                 * reset done bit gets set. */
@@ -710,6 +717,7 @@ omap_i2c_probe(struct platform_device *pdev)
        struct omap_i2c_dev     *dev;
        struct i2c_adapter      *adap;
        struct resource         *mem, *irq, *ioarea;
+       void *isr;
        int r;
        u32 speed = 0;
 
@@ -760,8 +768,7 @@ omap_i2c_probe(struct platform_device *pdev)
 
        omap_i2c_unidle(dev);
 
-       if (cpu_is_omap15xx())
-               dev->rev1 = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) < 0x20;
+       dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
 
        if (cpu_is_omap2430() || cpu_is_omap34xx()) {
                u16 s;
@@ -782,16 +789,16 @@ omap_i2c_probe(struct platform_device *pdev)
        /* reset ASAP, clearing any IRQs */
        omap_i2c_init(dev);
 
-       r = request_irq(dev->irq, dev->rev1 ? omap_i2c_rev1_isr : omap_i2c_isr,
-                       0, pdev->name, dev);
+       isr = (dev->rev < OMAP_I2C_REV_2) ? omap_i2c_rev1_isr : omap_i2c_isr;
+       r = request_irq(dev->irq, isr, 0, pdev->name, dev);
 
        if (r) {
                dev_err(dev->dev, "failure requesting irq %i\n", dev->irq);
                goto err_unuse_clocks;
        }
-       r = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
+
        dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n",
-                pdev->id, r >> 4, r & 0xf, dev->speed);
+                pdev->id, dev->rev >> 4, dev->rev & 0xf, dev->speed);
 
        omap_i2c_idle(dev);