]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
[IA64-SGI] Silent data corruption caused by XPC V2.
authorDean Nelson <dcn@sgi.com>
Tue, 8 Aug 2006 20:03:29 +0000 (15:03 -0500)
committerTony Luck <tony.luck@intel.com>
Tue, 8 Aug 2006 20:28:52 +0000 (13:28 -0700)
Jack Steiner identified a problem where XPC can cause a silent
data corruption.  On module load, the placement may cause the
xpc_remote_copy_buffer to span two physical pages.  DMA transfers are
done to the start virtual address translated to physical.

This patch changes the buffer from a statically allocated buffer to a
kmalloc'd buffer.  Dean Nelson reviewed this before posting.  I have
tested it in the configuration that was showing the memory corruption
and verified it works.  I also added a BUG_ON statement to help catch
this if a similar situation is encountered.

Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
arch/ia64/sn/kernel/xpc_channel.c
arch/ia64/sn/kernel/xpc_main.c
arch/ia64/sn/kernel/xpc_partition.c
include/asm-ia64/sn/xp.h
include/asm-ia64/sn/xpc.h

index c2f69f7942af06b3b83da10d03a92d7e482e805d..1f3540826e6859ff9dcd6e83b5789a2abc0df029 100644 (file)
@@ -279,8 +279,8 @@ xpc_pull_remote_cachelines(struct xpc_partition *part, void *dst,
                return part->reason;
        }
 
-       bte_ret = xp_bte_copy((u64) src, (u64) ia64_tpa((u64) dst),
-                               (u64) cnt, (BTE_NORMAL | BTE_WACQUIRE), NULL);
+       bte_ret = xp_bte_copy((u64) src, (u64) dst, (u64) cnt,
+                                       (BTE_NORMAL | BTE_WACQUIRE), NULL);
        if (bte_ret == BTE_SUCCESS) {
                return xpcSuccess;
        }
index 5e8e59efb34726a209829a0b3ebd63d867d0eb29..4d026f9dd98bbc71f214d1b01708e43b766b672c 100644 (file)
@@ -1052,6 +1052,8 @@ xpc_do_exit(enum xpc_retval reason)
        if (xpc_sysctl) {
                unregister_sysctl_table(xpc_sysctl);
        }
+
+       kfree(xpc_remote_copy_buffer_base);
 }
 
 
@@ -1212,24 +1214,20 @@ xpc_init(void)
        partid_t partid;
        struct xpc_partition *part;
        pid_t pid;
+       size_t buf_size;
 
 
        if (!ia64_platform_is("sn2")) {
                return -ENODEV;
        }
 
-       /*
-        * xpc_remote_copy_buffer is used as a temporary buffer for bte_copy'ng
-        * various portions of a partition's reserved page. Its size is based
-        * on the size of the reserved page header and part_nasids mask. So we
-        * need to ensure that the other items will fit as well.
-        */
-       if (XPC_RP_VARS_SIZE > XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES) {
-               dev_err(xpc_part, "xpc_remote_copy_buffer is not big enough\n");
-               return -EPERM;
-       }
-       DBUG_ON((u64) xpc_remote_copy_buffer !=
-                               L1_CACHE_ALIGN((u64) xpc_remote_copy_buffer));
+
+       buf_size = max(XPC_RP_VARS_SIZE,
+                               XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES);
+       xpc_remote_copy_buffer = xpc_kmalloc_cacheline_aligned(buf_size,
+                                    GFP_KERNEL, &xpc_remote_copy_buffer_base);
+       if (xpc_remote_copy_buffer == NULL)
+               return -ENOMEM;
 
        snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part");
        snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan");
@@ -1293,6 +1291,8 @@ xpc_init(void)
                if (xpc_sysctl) {
                        unregister_sysctl_table(xpc_sysctl);
                }
+
+               kfree(xpc_remote_copy_buffer_base);
                return -EBUSY;
        }
 
@@ -1311,6 +1311,8 @@ xpc_init(void)
                if (xpc_sysctl) {
                        unregister_sysctl_table(xpc_sysctl);
                }
+
+               kfree(xpc_remote_copy_buffer_base);
                return -EBUSY;
        }
 
@@ -1362,6 +1364,8 @@ xpc_init(void)
                if (xpc_sysctl) {
                        unregister_sysctl_table(xpc_sysctl);
                }
+
+               kfree(xpc_remote_copy_buffer_base);
                return -EBUSY;
        }
 
index 2a89cfce495440f6a0f4c2f0b5ed17158bb04a88..57c723f5cba404f5cda5fbefd6a370c97bc328df 100644 (file)
@@ -71,19 +71,15 @@ struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
  * Generic buffer used to store a local copy of portions of a remote
  * partition's reserved page (either its header and part_nasids mask,
  * or its vars).
- *
- * xpc_discovery runs only once and is a seperate thread that is
- * very likely going to be processing in parallel with receiving
- * interrupts.
  */
-char ____cacheline_aligned xpc_remote_copy_buffer[XPC_RP_HEADER_SIZE +
-                                                       XP_NASID_MASK_BYTES];
+char *xpc_remote_copy_buffer;
+void *xpc_remote_copy_buffer_base;
 
 
 /*
  * Guarantee that the kmalloc'd memory is cacheline aligned.
  */
-static void *
+void *
 xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
 {
        /* see if kmalloc will give us cachline aligned memory by default */
@@ -148,7 +144,7 @@ xpc_get_rsvd_page_pa(int nasid)
                        }
                }
 
-               bte_res = xp_bte_copy(rp_pa, ia64_tpa(buf), buf_len,
+               bte_res = xp_bte_copy(rp_pa, buf, buf_len,
                                        (BTE_NOTIFY | BTE_WACQUIRE), NULL);
                if (bte_res != BTE_SUCCESS) {
                        dev_dbg(xpc_part, "xp_bte_copy failed %i\n", bte_res);
@@ -447,7 +443,7 @@ xpc_check_remote_hb(void)
 
                /* pull the remote_hb cache line */
                bres = xp_bte_copy(part->remote_vars_pa,
-                                       ia64_tpa((u64) remote_vars),
+                                       (u64) remote_vars,
                                        XPC_RP_VARS_SIZE,
                                        (BTE_NOTIFY | BTE_WACQUIRE), NULL);
                if (bres != BTE_SUCCESS) {
@@ -498,8 +494,7 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
 
 
        /* pull over the reserved page header and part_nasids mask */
-
-       bres = xp_bte_copy(*remote_rp_pa, ia64_tpa((u64) remote_rp),
+       bres = xp_bte_copy(*remote_rp_pa, (u64) remote_rp,
                                XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes,
                                (BTE_NOTIFY | BTE_WACQUIRE), NULL);
        if (bres != BTE_SUCCESS) {
@@ -554,11 +549,8 @@ xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
                return xpcVarsNotSet;
        }
 
-
        /* pull over the cross partition variables */
-
-       bres = xp_bte_copy(remote_vars_pa, ia64_tpa((u64) remote_vars),
-                               XPC_RP_VARS_SIZE,
+       bres = xp_bte_copy(remote_vars_pa, (u64) remote_vars, XPC_RP_VARS_SIZE,
                                (BTE_NOTIFY | BTE_WACQUIRE), NULL);
        if (bres != BTE_SUCCESS) {
                return xpc_map_bte_errors(bres);
@@ -1239,7 +1231,7 @@ xpc_initiate_partid_to_nasids(partid_t partid, void *nasid_mask)
 
        part_nasid_pa = (u64) XPC_RP_PART_NASIDS(part->remote_rp_pa);
 
-       bte_res = xp_bte_copy(part_nasid_pa, ia64_tpa((u64) nasid_mask),
+       bte_res = xp_bte_copy(part_nasid_pa, (u64) nasid_mask,
                        xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
 
        return xpc_map_bte_errors(bte_res);
index 9bd2f9bf329b39538f5d762a391a0baf98eba980..6f807e0193b77600f7a3abd03125fdb9cebc2b13 100644 (file)
  * the bte_copy() once in the hope that the failure was due to a temporary
  * aberration (i.e., the link going down temporarily).
  *
- * See bte_copy for definition of the input parameters.
+ *     src - physical address of the source of the transfer.
+ *     vdst - virtual address of the destination of the transfer.
+ *     len - number of bytes to transfer from source to destination.
+ *     mode - see bte_copy() for definition.
+ *     notification - see bte_copy() for definition.
  *
  * Note: xp_bte_copy() should never be called while holding a spinlock.
  */
 static inline bte_result_t
-xp_bte_copy(u64 src, u64 dest, u64 len, u64 mode, void *notification)
+xp_bte_copy(u64 src, u64 vdst, u64 len, u64 mode, void *notification)
 {
        bte_result_t ret;
+       u64 pdst = ia64_tpa(vdst);
 
 
-       ret = bte_copy(src, dest, len, mode, notification);
+       /*
+        * Ensure that the physically mapped memory is contiguous.
+        *
+        * We do this by ensuring that the memory is from region 7 only.
+        * If the need should arise to use memory from one of the other
+        * regions, then modify the BUG_ON() statement to ensure that the
+        * memory from that region is always physically contiguous.
+        */
+       BUG_ON(REGION_NUMBER(vdst) != RGN_KERNEL);
 
+       ret = bte_copy(src, pdst, len, mode, notification);
        if (ret != BTE_SUCCESS) {
                if (!in_interrupt()) {
                        cond_resched();
                }
-               ret = bte_copy(src, dest, len, mode, notification);
+               ret = bte_copy(src, pdst, len, mode, notification);
        }
 
        return ret;
index b72af597878dc21218f9242ad4c5faf42b1c244f..35e1386f37ab5f046828554e36383ca8b045e8c3 100644 (file)
@@ -683,7 +683,9 @@ extern struct xpc_vars *xpc_vars;
 extern struct xpc_rsvd_page *xpc_rsvd_page;
 extern struct xpc_vars_part *xpc_vars_part;
 extern struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
-extern char xpc_remote_copy_buffer[];
+extern char *xpc_remote_copy_buffer;
+extern void *xpc_remote_copy_buffer_base;
+extern void *xpc_kmalloc_cacheline_aligned(size_t, gfp_t, void **);
 extern struct xpc_rsvd_page *xpc_rsvd_page_init(void);
 extern void xpc_allow_IPI_ops(void);
 extern void xpc_restrict_IPI_ops(void);