/*
- * arch/ppc/platforms/pmac_low_i2c.c
+ * arch/powerpc/platforms/powermac/low_i2c.c
*
- * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ * Copyright (C) 2003-2005 Ben. Herrenschmidt (benh@kernel.crashing.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * This file contains some low-level i2c access routines that
- * need to be used by various bits of the PowerMac platform code
- * at times where the real asynchronous & interrupt driven driver
- * cannot be used. The API borrows some semantics from the darwin
- * driver in order to ease the implementation of the platform
- * properties parser
+ * The linux i2c layer isn't completely suitable for our needs for various
+ * reasons ranging from too late initialisation to semantics not perfectly
+ * matching some requirements of the apple platform functions etc...
+ *
+ * This file thus provides a simple low level unified i2c interface for
+ * powermac that covers the various types of i2c busses used in Apple machines.
+ * For now, keywest, PMU and SMU, though we could add Cuda, or other bit
+ * banging busses found on older chipstes in earlier machines if we ever need
+ * one of them.
+ *
+ * The drivers in this file are synchronous/blocking. In addition, the
+ * keywest one is fairly slow due to the use of msleep instead of interrupts
+ * as the interrupt is currently used by i2c-keywest. In the long run, we
+ * might want to get rid of those high-level interfaces to linux i2c layer
+ * either completely (converting all drivers) or replacing them all with a
+ * single stub driver on top of this one. Once done, the interrupt will be
+ * available for our use.
*/
#undef DEBUG
+#undef DEBUG_LOW
#include <linux/config.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/adb.h>
#include <linux/pmu.h>
+#include <linux/delay.h>
+#include <linux/completion.h>
#include <asm/keylargo.h>
#include <asm/uninorth.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/machdep.h>
+#include <asm/smu.h>
#include <asm/pmac_low_i2c.h>
-#define MAX_LOW_I2C_HOST 4
-
#ifdef DEBUG
#define DBG(x...) do {\
printk(KERN_DEBUG "low_i2c:" x); \
#define DBG(x...)
#endif
-struct low_i2c_host;
-
-typedef int (*low_i2c_func_t)(struct low_i2c_host *host, u8 addr, u8 sub, u8 *data, int len);
-
-struct low_i2c_host
-{
- struct device_node *np; /* OF device node */
- struct semaphore mutex; /* Access mutex for use by i2c-keywest */
- low_i2c_func_t func; /* Access function */
- unsigned int is_open : 1; /* Poor man's access control */
- int mode; /* Current mode */
- int channel; /* Current channel */
- int num_channels; /* Number of channels */
- void __iomem *base; /* For keywest-i2c, base address */
- int bsteps; /* And register stepping */
- int speed; /* And speed */
-};
-
-static struct low_i2c_host low_i2c_hosts[MAX_LOW_I2C_HOST];
+#ifdef DEBUG_LOW
+#define DBG_LOW(x...) do {\
+ printk(KERN_DEBUG "low_i2c:" x); \
+ } while(0)
+#else
+#define DBG_LOW(x...)
+#endif
-/* No locking is necessary on allocation, we are running way before
- * anything can race with us
+/*
+ * A bus structure. Each bus in the system has such a structure associated.
*/
-static struct low_i2c_host *find_low_i2c_host(struct device_node *np)
+struct pmac_i2c_bus
{
- int i;
+ struct list_head link;
+ struct device_node *controller;
+ struct device_node *busnode;
+ int type;
+ int flags;
+ struct i2c_adapter *adapter;
+ void *hostdata;
+ int channel; /* some hosts have multiple */
+ int mode; /* current mode */
+ struct semaphore sem;
+ int opened;
+ int polled; /* open mode */
+
+ /* ops */
+ int (*open)(struct pmac_i2c_bus *bus);
+ void (*close)(struct pmac_i2c_bus *bus);
+ int (*xfer)(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
+ u32 subaddr, u8 *data, int len);
+};
- for (i = 0; i < MAX_LOW_I2C_HOST; i++)
- if (low_i2c_hosts[i].np == np)
- return &low_i2c_hosts[i];
- return NULL;
-}
+static LIST_HEAD(pmac_i2c_busses);
/*
- *
- * i2c-keywest implementation (UniNorth, U2, U3, Keylargo's)
- *
+ * Keywest implementation
*/
-/*
- * Keywest i2c definitions borrowed from drivers/i2c/i2c-keywest.h,
- * should be moved somewhere in include/asm-ppc/
- */
+struct pmac_i2c_host_kw
+{
+ struct semaphore mutex; /* Access mutex for use by
+ * i2c-keywest */
+ void __iomem *base; /* register base address */
+ int bsteps; /* register stepping */
+ int speed; /* speed */
+};
+
/* Register indices */
typedef enum {
reg_mode = 0,
"state_dead"
};
-static inline u8 __kw_read_reg(struct low_i2c_host *host, reg_t reg)
+static inline u8 __kw_read_reg(struct pmac_i2c_bus *bus, reg_t reg)
{
+ struct pmac_i2c_host_kw *host = bus->hostdata;
return readb(host->base + (((unsigned int)reg) << host->bsteps));
}
-static inline void __kw_write_reg(struct low_i2c_host *host, reg_t reg, u8 val)
+static inline void __kw_write_reg(struct pmac_i2c_bus *bus, reg_t reg, u8 val)
{
+ struct pmac_i2c_host_kw *host = bus->hostdata;
writeb(val, host->base + (((unsigned)reg) << host->bsteps));
- (void)__kw_read_reg(host, reg_subaddr);
+ (void)__kw_read_reg(bus, reg_subaddr);
}
-#define kw_write_reg(reg, val) __kw_write_reg(host, reg, val)
-#define kw_read_reg(reg) __kw_read_reg(host, reg)
+#define kw_write_reg(reg, val) __kw_write_reg(bus, reg, val)
+#define kw_read_reg(reg) __kw_read_reg(bus, reg)
-
-/* Don't schedule, the g5 fan controller is too
- * timing sensitive
- */
-static u8 kw_wait_interrupt(struct low_i2c_host* host)
+static u8 kw_i2c_wait_interrupt(struct pmac_i2c_bus* bus)
{
int i, j;
u8 isr;
- for (i = 0; i < 100000; i++) {
+ for (i = 0; i < 1000; i++) {
isr = kw_read_reg(reg_isr) & KW_I2C_IRQ_MASK;
if (isr != 0)
return isr;
/* This code is used with the timebase frozen, we cannot rely
- * on udelay ! For now, just use a bogus loop
+ * on udelay nor schedule when in polled mode !
+ * For now, just use a bogus loop....
*/
- for (j = 1; j < 10000; j++)
- mb();
+ if (bus->polled) {
+ for (j = 1; j < 1000000; j++)
+ mb();
+ } else
+ msleep(1);
}
return isr;
}
-static int kw_handle_interrupt(struct low_i2c_host *host, int state, int rw, int *rc, u8 **data, int *len, u8 isr)
+static int kw_i2c_handle_interrupt(struct pmac_i2c_bus *bus, int state, int rw,
+ int *rc, u8 **data, int *len, u8 isr)
{
u8 ack;
- DBG("kw_handle_interrupt(%s, isr: %x)\n", __kw_state_names[state], isr);
+ DBG_LOW("kw_handle_interrupt(%s, isr: %x)\n",
+ __kw_state_names[state], isr);
if (isr == 0) {
if (state != state_stop) {
- DBG("KW: Timeout !\n");
+ DBG_LOW("KW: Timeout !\n");
*rc = -EIO;
goto stop;
}
*rc = -EIO;
goto stop;
}
- if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
+ if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
*rc = -ENODEV;
- DBG("KW: NAK on address\n");
+ DBG_LOW("KW: NAK on address\n");
return state_stop;
} else {
if (rw) {
state = state_read;
if (*len > 1)
- kw_write_reg(reg_control, KW_I2C_CTL_AAK);
+ kw_write_reg(reg_control,
+ KW_I2C_CTL_AAK);
} else {
state = state_write;
kw_write_reg(reg_data, **data);
} else if (state == state_write) {
ack = kw_read_reg(reg_status);
if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
- DBG("KW: nack on data write\n");
+ DBG_LOW("KW: nack on data write\n");
*rc = -EIO;
goto stop;
} else if (*len) {
return state_stop;
}
-static int keywest_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 subaddr, u8 *data, int len)
+static int kw_i2c_open(struct pmac_i2c_bus *bus)
{
+ struct pmac_i2c_host_kw *host = bus->hostdata;
+ down(&host->mutex);
+ return 0;
+}
+
+static void kw_i2c_close(struct pmac_i2c_bus *bus)
+{
+ struct pmac_i2c_host_kw *host = bus->hostdata;
+ up(&host->mutex);
+}
+
+static int kw_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
+ u32 subaddr, u8 *data, int len)
+{
+ struct pmac_i2c_host_kw *host = bus->hostdata;
u8 mode_reg = host->speed;
int state = state_addr;
int rc = 0;
/* Setup mode & subaddress if any */
- switch(host->mode) {
- case pmac_low_i2c_mode_dumb:
- printk(KERN_ERR "low_i2c: Dumb mode not supported !\n");
+ switch(bus->mode) {
+ case pmac_i2c_mode_dumb:
return -EINVAL;
- case pmac_low_i2c_mode_std:
+ case pmac_i2c_mode_std:
mode_reg |= KW_I2C_MODE_STANDARD;
+ if (subsize != 0)
+ return -EINVAL;
break;
- case pmac_low_i2c_mode_stdsub:
+ case pmac_i2c_mode_stdsub:
mode_reg |= KW_I2C_MODE_STANDARDSUB;
+ if (subsize != 1)
+ return -EINVAL;
break;
- case pmac_low_i2c_mode_combined:
+ case pmac_i2c_mode_combined:
mode_reg |= KW_I2C_MODE_COMBINED;
+ if (subsize != 1)
+ return -EINVAL;
break;
}
/* Setup channel & clear pending irqs */
kw_write_reg(reg_isr, kw_read_reg(reg_isr));
- kw_write_reg(reg_mode, mode_reg | (host->channel << 4));
+ kw_write_reg(reg_mode, mode_reg | (bus->channel << 4));
kw_write_reg(reg_status, 0);
- /* Set up address and r/w bit */
- kw_write_reg(reg_addr, addr);
+ /* Set up address and r/w bit, strip possible stale bus number from
+ * address top bits
+ */
+ kw_write_reg(reg_addr, addrdir & 0xff);
/* Set up the sub address */
if ((mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB
kw_write_reg(reg_ier, 0 /*KW_I2C_IRQ_MASK*/);
kw_write_reg(reg_control, KW_I2C_CTL_XADDR);
- /* State machine, to turn into an interrupt handler */
+ /* State machine, to turn into an interrupt handler in the future */
while(state != state_idle) {
- u8 isr = kw_wait_interrupt(host);
- state = kw_handle_interrupt(host, state, addr & 1, &rc, &data, &len, isr);
+ u8 isr = kw_i2c_wait_interrupt(bus);
+ state = kw_i2c_handle_interrupt(bus, state, addrdir & 1, &rc,
+ &data, &len, isr);
}
return rc;
}
-static void keywest_low_i2c_add(struct device_node *np)
+static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
{
- struct low_i2c_host *host = find_low_i2c_host(NULL);
+ struct pmac_i2c_host_kw *host;
u32 *psteps, *prate, *addrp, steps;
- struct device_node *parent;
+ host = kzalloc(sizeof(struct pmac_i2c_host_kw), GFP_KERNEL);
if (host == NULL) {
printk(KERN_ERR "low_i2c: Can't allocate host for %s\n",
np->full_name);
- return;
+ return NULL;
}
- memset(host, 0, sizeof(*host));
/* Apple is kind enough to provide a valid AAPL,address property
* on all i2c keywest nodes so far ... we would have to fallback
if (addrp == NULL) {
printk(KERN_ERR "low_i2c: Can't find address for %s\n",
np->full_name);
- return;
+ kfree(host);
+ return NULL;
}
init_MUTEX(&host->mutex);
- host->np = of_node_get(np);
psteps = (u32 *)get_property(np, "AAPL,address-step", NULL);
steps = psteps ? (*psteps) : 0x10;
for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++)
steps >>= 1;
- parent = of_get_parent(np);
- host->num_channels = 1;
- if (parent && parent->name[0] == 'u')
- host->num_channels = 2;
/* Select interface rate */
host->speed = KW_I2C_MODE_25KHZ;
prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL);
break;
}
- printk(KERN_INFO "low_i2c: Bus %s found at 0x%08x, %d channels,"
- " speed = %d KHz\n",
- np->full_name, *addrp, host->num_channels, prate ? *prate : 25);
-
- host->mode = pmac_low_i2c_mode_std;
+ printk(KERN_INFO "KeyWest i2c @0x%08x %s\n", *addrp, np->full_name);
host->base = ioremap((*addrp), 0x1000);
- host->func = keywest_low_i2c_func;
+
+ return host;
}
+
+static void __init kw_i2c_add(struct pmac_i2c_host_kw *host,
+ struct device_node *controller,
+ struct device_node *busnode,
+ int channel)
+{
+ struct pmac_i2c_bus *bus;
+
+ bus = kzalloc(sizeof(struct pmac_i2c_bus), GFP_KERNEL);
+ if (bus == NULL)
+ return;
+
+ bus->controller = of_node_get(controller);
+ bus->busnode = of_node_get(busnode);
+ bus->type = pmac_i2c_bus_keywest;
+ bus->hostdata = host;
+ bus->channel = channel;
+ bus->mode = pmac_i2c_mode_std;
+ bus->open = kw_i2c_open;
+ bus->close = kw_i2c_close;
+ bus->xfer = kw_i2c_xfer;
+ init_MUTEX(&bus->sem);
+ if (controller == busnode)
+ bus->flags = pmac_i2c_multibus;
+ list_add(&bus->link, &pmac_i2c_busses);
+
+ printk(KERN_INFO " channel %d bus %s\n", channel,
+ (controller == busnode) ? "<multibus>" : busnode->full_name);
+}
+
+static void __init kw_i2c_probe(void)
+{
+ struct device_node *np, *child, *parent;
+
+ /* Probe keywest-i2c busses */
+ for (np = NULL;
+ (np = of_find_compatible_node(np, "i2c","keywest-i2c")) != NULL;){
+ struct pmac_i2c_host_kw *host;
+ int multibus, chans, i;
+
+ /* Found one, init a host structure */
+ host = kw_i2c_host_init(np);
+ if (host == NULL)
+ continue;
+
+ /* Now check if we have a multibus setup (old style) or if we
+ * have proper bus nodes. Note that the "new" way (proper bus
+ * nodes) might cause us to not create some busses that are
+ * kept hidden in the device-tree. In the future, we might
+ * want to work around that by creating busses without a node
+ * but not for now
+ */
+ child = of_get_next_child(np, NULL);
+ multibus = !child || strcmp(child->name, "i2c-bus");
+ of_node_put(child);
+
+ /* For a multibus setup, we get the bus count based on the
+ * parent type
+ */
+ if (multibus) {
+ parent = of_get_parent(np);
+ if (parent == NULL)
+ continue;
+ chans = parent->name[0] == 'u' ? 2 : 1;
+ for (i = 0; i < chans; i++)
+ kw_i2c_add(host, np, np, i);
+ } else {
+ for (child = NULL;
+ (child = of_get_next_child(np, child)) != NULL;) {
+ u32 *reg =
+ (u32 *)get_property(child, "reg", NULL);
+ if (reg == NULL)
+ continue;
+ kw_i2c_add(host, np, child, *reg);
+ }
+ }
+ }
+}
+
+
/*
*
* PMU implementation
*
*/
-
#ifdef CONFIG_ADB_PMU
-static int pmu_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 sub, u8 *data, int len)
+/*
+ * i2c command block to the PMU
+ */
+struct pmu_i2c_hdr {
+ u8 bus;
+ u8 mode;
+ u8 bus2;
+ u8 address;
+ u8 sub_addr;
+ u8 comb_addr;
+ u8 count;
+ u8 data[];
+};
+
+static void pmu_i2c_complete(struct adb_request *req)
{
- // TODO
- return -ENODEV;
+ complete(req->arg);
}
-static void pmu_low_i2c_add(struct device_node *np)
+static int pmu_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
+ u32 subaddr, u8 *data, int len)
{
- struct low_i2c_host *host = find_low_i2c_host(NULL);
+ struct adb_request *req = bus->hostdata;
+ struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req->data[1];
+ struct completion comp;
+ int read = addrdir & 1;
+ int retry;
+ int rc = 0;
- if (host == NULL) {
- printk(KERN_ERR "low_i2c: Can't allocate host for %s\n",
- np->full_name);
- return;
+ /* For now, limit ourselves to 16 bytes transfers */
+ if (len > 16)
+ return -EINVAL;
+
+ init_completion(&comp);
+
+ for (retry = 0; retry < 16; retry++) {
+ memset(req, 0, sizeof(struct adb_request));
+ hdr->bus = bus->channel;
+ hdr->count = len;
+
+ switch(bus->mode) {
+ case pmac_i2c_mode_std:
+ if (subsize != 0)
+ return -EINVAL;
+ hdr->address = addrdir;
+ hdr->mode = PMU_I2C_MODE_SIMPLE;
+ break;
+ case pmac_i2c_mode_stdsub:
+ case pmac_i2c_mode_combined:
+ if (subsize != 1)
+ return -EINVAL;
+ hdr->address = addrdir & 0xfe;
+ hdr->comb_addr = addrdir;
+ hdr->sub_addr = subaddr;
+ if (bus->mode == pmac_i2c_mode_stdsub)
+ hdr->mode = PMU_I2C_MODE_STDSUB;
+ else
+ hdr->mode = PMU_I2C_MODE_COMBINED;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ INIT_COMPLETION(comp);
+ req->data[0] = PMU_I2C_CMD;
+ req->reply[0] = 0xff;
+ req->nbytes = sizeof(struct pmu_i2c_hdr) + 1;
+ req->done = pmu_i2c_complete;
+ req->arg = ∁
+ if (!read) {
+ memcpy(hdr->data, data, len);
+ req->nbytes += len;
+ }
+ rc = pmu_queue_request(req);
+ if (rc)
+ return rc;
+ wait_for_completion(&comp);
+ if (req->reply[0] == PMU_I2C_STATUS_OK)
+ break;
+ msleep(15);
}
- memset(host, 0, sizeof(*host));
+ if (req->reply[0] != PMU_I2C_STATUS_OK)
+ return -EIO;
- init_MUTEX(&host->mutex);
- host->np = of_node_get(np);
- host->num_channels = 3;
- host->mode = pmac_low_i2c_mode_std;
- host->func = pmu_low_i2c_func;
+ for (retry = 0; retry < 16; retry++) {
+ memset(req, 0, sizeof(struct adb_request));
+
+ /* I know that looks like a lot, slow as hell, but darwin
+ * does it so let's be on the safe side for now
+ */
+ msleep(15);
+
+ hdr->bus = PMU_I2C_BUS_STATUS;
+
+ INIT_COMPLETION(comp);
+ req->data[0] = PMU_I2C_CMD;
+ req->reply[0] = 0xff;
+ req->nbytes = 2;
+ req->done = pmu_i2c_complete;
+ req->arg = ∁
+ rc = pmu_queue_request(req);
+ if (rc)
+ return rc;
+ wait_for_completion(&comp);
+
+ if (req->reply[0] == PMU_I2C_STATUS_OK && !read)
+ return 0;
+ if (req->reply[0] == PMU_I2C_STATUS_DATAREAD && read) {
+ int rlen = req->reply_len - 1;
+
+ if (rlen != len) {
+ printk(KERN_WARNING "low_i2c: PMU returned %d"
+ " bytes, expected %d !\n", rlen, len);
+ return -EIO;
+ }
+ memcpy(data, &req->reply[1], len);
+ return 0;
+ }
+ }
+ return -EIO;
+}
+
+static void __init pmu_i2c_probe(void)
+{
+ struct pmac_i2c_bus *bus;
+ struct device_node *busnode;
+ int channel, sz;
+
+ if (!pmu_present())
+ return;
+
+ /* There might or might not be a "pmu-i2c" node, we use that
+ * or via-pmu itself, whatever we find. I haven't seen a machine
+ * with separate bus nodes, so we assume a multibus setup
+ */
+ busnode = of_find_node_by_name(NULL, "pmu-i2c");
+ if (busnode == NULL)
+ busnode = of_find_node_by_name(NULL, "via-pmu");
+ if (busnode == NULL)
+ return;
+
+ printk(KERN_INFO "PMU i2c %s\n", busnode->full_name);
+
+ /*
+ * We add bus 1 and 2 only for now, bus 0 is "special"
+ */
+ for (channel = 1; channel <= 2; channel++) {
+ sz = sizeof(struct pmac_i2c_bus) + sizeof(struct adb_request);
+ bus = kzalloc(sz, GFP_KERNEL);
+ if (bus == NULL)
+ return;
+
+ bus->controller = busnode;
+ bus->busnode = busnode;
+ bus->type = pmac_i2c_bus_pmu;
+ bus->channel = channel;
+ bus->mode = pmac_i2c_mode_std;
+ bus->hostdata = bus + 1;
+ bus->xfer = pmu_i2c_xfer;
+ init_MUTEX(&bus->sem);
+ bus->flags = pmac_i2c_multibus;
+ list_add(&bus->link, &pmac_i2c_busses);
+
+ printk(KERN_INFO " channel %d bus <multibus>\n", channel);
+ }
}
#endif /* CONFIG_ADB_PMU */
-void __init pmac_init_low_i2c(void)
+
+/*
+ *
+ * SMU implementation
+ *
+ */
+
+#ifdef CONFIG_PMAC_SMU
+
+static void smu_i2c_complete(struct smu_i2c_cmd *cmd, void *misc)
{
- struct device_node *np;
+ complete(misc);
+}
- /* Probe keywest-i2c busses */
- np = of_find_compatible_node(NULL, "i2c", "keywest-i2c");
- while(np) {
- keywest_low_i2c_add(np);
- np = of_find_compatible_node(np, "i2c", "keywest-i2c");
+static int smu_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
+ u32 subaddr, u8 *data, int len)
+{
+ struct smu_i2c_cmd *cmd = bus->hostdata;
+ struct completion comp;
+ int read = addrdir & 1;
+ int rc = 0;
+
+ memset(cmd, 0, sizeof(struct smu_i2c_cmd));
+ cmd->info.bus = bus->channel;
+ cmd->info.devaddr = addrdir;
+ cmd->info.datalen = len;
+
+ switch(bus->mode) {
+ case pmac_i2c_mode_std:
+ if (subsize != 0)
+ return -EINVAL;
+ cmd->info.type = SMU_I2C_TRANSFER_SIMPLE;
+ break;
+ case pmac_i2c_mode_stdsub:
+ case pmac_i2c_mode_combined:
+ if (subsize > 3 || subsize < 1)
+ return -EINVAL;
+ cmd->info.sublen = subsize;
+ /* that's big-endian only but heh ! */
+ memcpy(&cmd->info.subaddr, ((char *)&subaddr) + (4 - subsize),
+ subsize);
+ if (bus->mode == pmac_i2c_mode_stdsub)
+ cmd->info.type = SMU_I2C_TRANSFER_STDSUB;
+ else
+ cmd->info.type = SMU_I2C_TRANSFER_COMBINED;
+ break;
+ default:
+ return -EINVAL;
}
+ if (!read)
+ memcpy(cmd->info.data, data, len);
+
+ init_completion(&comp);
+ cmd->done = smu_i2c_complete;
+ cmd->misc = ∁
+ rc = smu_queue_i2c(cmd);
+ if (rc < 0)
+ return rc;
+ wait_for_completion(&comp);
+ rc = cmd->status;
+
+ if (read)
+ memcpy(data, cmd->info.data, len);
+ return rc < 0 ? rc : 0;
+}
-#ifdef CONFIG_ADB_PMU
- /* Probe PMU busses */
- np = of_find_node_by_name(NULL, "via-pmu");
- if (np)
- pmu_low_i2c_add(np);
-#endif /* CONFIG_ADB_PMU */
+static void __init smu_i2c_probe(void)
+{
+ struct device_node *controller, *busnode;
+ struct pmac_i2c_bus *bus;
+ u32 *reg;
+ int sz;
+
+ if (!smu_present())
+ return;
+
+ controller = of_find_node_by_name(NULL, "smu_i2c_control");
+ if (controller == NULL)
+ controller = of_find_node_by_name(NULL, "smu");
+ if (controller == NULL)
+ return;
+
+ printk(KERN_INFO "SMU i2c %s\n", controller->full_name);
+
+ /* Look for childs, note that they might not be of the right
+ * type as older device trees mix i2c busses and other thigns
+ * at the same level
+ */
+ for (busnode = NULL;
+ (busnode = of_get_next_child(controller, busnode)) != NULL;) {
+ if (strcmp(busnode->type, "i2c") &&
+ strcmp(busnode->type, "i2c-bus"))
+ continue;
+ reg = (u32 *)get_property(busnode, "reg", NULL);
+ if (reg == NULL)
+ continue;
+
+ sz = sizeof(struct pmac_i2c_bus) + sizeof(struct smu_i2c_cmd);
+ bus = kzalloc(sz, GFP_KERNEL);
+ if (bus == NULL)
+ return;
+
+ bus->controller = controller;
+ bus->busnode = of_node_get(busnode);
+ bus->type = pmac_i2c_bus_smu;
+ bus->channel = *reg;
+ bus->mode = pmac_i2c_mode_std;
+ bus->hostdata = bus + 1;
+ bus->xfer = smu_i2c_xfer;
+ init_MUTEX(&bus->sem);
+ bus->flags = 0;
+ list_add(&bus->link, &pmac_i2c_busses);
+
+ printk(KERN_INFO " channel %x bus %s\n",
+ bus->channel, busnode->full_name);
+ }
+}
+
+#endif /* CONFIG_PMAC_SMU */
+
+/*
+ *
+ * Core code
+ *
+ */
+
+
+struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node)
+{
+ struct device_node *p = of_node_get(node);
+ struct device_node *prev = NULL;
+ struct pmac_i2c_bus *bus;
+
+ while(p) {
+ list_for_each_entry(bus, &pmac_i2c_busses, link) {
+ if (p == bus->busnode) {
+ if (prev && bus->flags & pmac_i2c_multibus) {
+ u32 *reg;
+ reg = (u32 *)get_property(prev, "reg",
+ NULL);
+ if (!reg)
+ continue;
+ if (((*reg) >> 8) != bus->channel)
+ continue;
+ }
+ of_node_put(p);
+ of_node_put(prev);
+ return bus;
+ }
+ }
+ of_node_put(prev);
+ prev = p;
+ p = of_get_parent(p);
+ }
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_find_bus);
+
+u8 pmac_i2c_get_dev_addr(struct device_node *device)
+{
+ u32 *reg = (u32 *)get_property(device, "reg", NULL);
+
+ if (reg == NULL)
+ return 0;
+
+ return (*reg) & 0xff;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_get_dev_addr);
+
+struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus)
+{
+ return bus->controller;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_get_controller);
+
+struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus)
+{
+ return bus->busnode;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_get_bus_node);
+
+int pmac_i2c_get_type(struct pmac_i2c_bus *bus)
+{
+ return bus->type;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_get_type);
+
+int pmac_i2c_get_flags(struct pmac_i2c_bus *bus)
+{
+ return bus->flags;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_get_flags);
- /* TODO: Add CUDA support as well */
+void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus,
+ struct i2c_adapter *adapter)
+{
+ WARN_ON(bus->adapter != NULL);
+ bus->adapter = adapter;
}
+EXPORT_SYMBOL_GPL(pmac_i2c_attach_adapter);
+
+void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus,
+ struct i2c_adapter *adapter)
+{
+ WARN_ON(bus->adapter != adapter);
+ bus->adapter = NULL;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_detach_adapter);
+
+struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus)
+{
+ return bus->adapter;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_get_adapter);
+
+extern int pmac_i2c_match_adapter(struct device_node *dev,
+ struct i2c_adapter *adapter)
+{
+ struct pmac_i2c_bus *bus = pmac_i2c_find_bus(dev);
+
+ if (bus == NULL)
+ return 0;
+ return (bus->adapter == adapter);
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_match_adapter);
int pmac_low_i2c_lock(struct device_node *np)
{
- struct low_i2c_host *host = find_low_i2c_host(np);
+ struct pmac_i2c_bus *bus, *found = NULL;
- if (!host)
+ list_for_each_entry(bus, &pmac_i2c_busses, link) {
+ if (np == bus->controller) {
+ found = bus;
+ break;
+ }
+ }
+ if (!found)
return -ENODEV;
- down(&host->mutex);
- return 0;
+ return pmac_i2c_open(bus, 0);
}
-EXPORT_SYMBOL(pmac_low_i2c_lock);
+EXPORT_SYMBOL_GPL(pmac_low_i2c_lock);
int pmac_low_i2c_unlock(struct device_node *np)
{
- struct low_i2c_host *host = find_low_i2c_host(np);
+ struct pmac_i2c_bus *bus, *found = NULL;
- if (!host)
+ list_for_each_entry(bus, &pmac_i2c_busses, link) {
+ if (np == bus->controller) {
+ found = bus;
+ break;
+ }
+ }
+ if (!found)
return -ENODEV;
- up(&host->mutex);
+ pmac_i2c_close(bus);
return 0;
}
-EXPORT_SYMBOL(pmac_low_i2c_unlock);
+EXPORT_SYMBOL_GPL(pmac_low_i2c_unlock);
-int pmac_low_i2c_open(struct device_node *np, int channel)
+int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled)
{
- struct low_i2c_host *host = find_low_i2c_host(np);
+ int rc;
+
+ down(&bus->sem);
+ bus->polled = polled;
+ bus->opened = 1;
+ bus->mode = pmac_i2c_mode_std;
+ if (bus->open && (rc = bus->open(bus)) != 0) {
+ bus->opened = 0;
+ up(&bus->sem);
+ return rc;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_open);
- if (!host)
- return -ENODEV;
+void pmac_i2c_close(struct pmac_i2c_bus *bus)
+{
+ WARN_ON(!bus->opened);
+ if (bus->close)
+ bus->close(bus);
+ bus->opened = 0;
+ up(&bus->sem);
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_close);
- if (channel >= host->num_channels)
- return -EINVAL;
+int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode)
+{
+ WARN_ON(!bus->opened);
- down(&host->mutex);
- host->is_open = 1;
- host->channel = channel;
+ /* Report me if you see the error below as there might be a new
+ * "combined4" mode that I need to implement for the SMU bus
+ */
+ if (mode < pmac_i2c_mode_dumb || mode > pmac_i2c_mode_combined) {
+ printk(KERN_ERR "low_i2c: Invalid mode %d requested on"
+ " bus %s !\n", mode, bus->busnode->full_name);
+ return -EINVAL;
+ }
+ bus->mode = mode;
return 0;
}
-EXPORT_SYMBOL(pmac_low_i2c_open);
+EXPORT_SYMBOL_GPL(pmac_i2c_setmode);
-int pmac_low_i2c_close(struct device_node *np)
+int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
+ u32 subaddr, u8 *data, int len)
{
- struct low_i2c_host *host = find_low_i2c_host(np);
+ int rc;
- if (!host)
- return -ENODEV;
+ WARN_ON(!bus->opened);
- host->is_open = 0;
- up(&host->mutex);
+ DBG("xfer() chan=%d, addrdir=0x%x, mode=%d, subsize=%d, subaddr=0x%x,"
+ " %d bytes, bus %s\n", bus->channel, addrdir, bus->mode, subsize,
+ subaddr, len, bus->busnode->full_name);
- return 0;
+ rc = bus->xfer(bus, addrdir, subsize, subaddr, data, len);
+
+#ifdef DEBUG
+ if (rc)
+ DBG("xfer error %d\n", rc);
+#endif
+ return rc;
}
-EXPORT_SYMBOL(pmac_low_i2c_close);
+EXPORT_SYMBOL_GPL(pmac_i2c_xfer);
-int pmac_low_i2c_setmode(struct device_node *np, int mode)
+/*
+ * Initialize us: probe all i2c busses on the machine and instantiate
+ * busses.
+ */
+/* This is non-static as it might be called early by smp code */
+int __init pmac_i2c_init(void)
{
- struct low_i2c_host *host = find_low_i2c_host(np);
+ static int i2c_inited;
- if (!host)
- return -ENODEV;
- WARN_ON(!host->is_open);
- host->mode = mode;
+ if (i2c_inited)
+ return 0;
+ i2c_inited = 1;
- return 0;
-}
-EXPORT_SYMBOL(pmac_low_i2c_setmode);
+ /* Probe keywest-i2c busses */
+ kw_i2c_probe();
-int pmac_low_i2c_xfer(struct device_node *np, u8 addrdir, u8 subaddr, u8 *data, int len)
-{
- struct low_i2c_host *host = find_low_i2c_host(np);
+#ifdef CONFIG_ADB_PMU
+ pmu_i2c_probe();
+#endif
- if (!host)
- return -ENODEV;
- WARN_ON(!host->is_open);
+#ifdef CONFIG_PMAC_SMU
+ smu_i2c_probe();
+#endif
- return host->func(host, addrdir, subaddr, data, len);
+ return 0;
}
-EXPORT_SYMBOL(pmac_low_i2c_xfer);
+arch_initcall(pmac_i2c_init);
#endif /* CONFIG_ADB */
static int init_pmu(void);
-static int pmu_queue_request(struct adb_request *req);
static void pmu_start(void);
static irqreturn_t via_pmu_interrupt(int irq, void *arg, struct pt_regs *regs);
static irqreturn_t gpio1_interrupt(int irq, void *arg, struct pt_regs *regs);
return via != 0;
}
-struct pmu_i2c_hdr {
- u8 bus;
- u8 mode;
- u8 bus2;
- u8 address;
- u8 sub_addr;
- u8 comb_addr;
- u8 count;
-};
-
-int
-pmu_i2c_combined_read(int bus, int addr, int subaddr, u8* data, int len)
-{
- struct adb_request req;
- struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
- int retry;
- int rc;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- hdr->bus = bus;
- hdr->address = addr & 0xfe;
- hdr->mode = PMU_I2C_MODE_COMBINED;
- hdr->bus2 = 0;
- hdr->sub_addr = subaddr;
- hdr->comb_addr = addr | 1;
- hdr->count = len;
-
- req.nbytes = sizeof(struct pmu_i2c_hdr) + 1;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- req.reply[0] = 0xff;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- break;
- mdelay(15);
- }
- if (req.reply[0] != PMU_I2C_STATUS_OK)
- return -1;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- mdelay(15);
-
- hdr->bus = PMU_I2C_BUS_STATUS;
- req.reply[0] = 0xff;
-
- req.nbytes = 2;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_DATAREAD) {
- memcpy(data, &req.reply[1], req.reply_len - 1);
- return req.reply_len - 1;
- }
- }
- return -1;
-}
-
-int
-pmu_i2c_stdsub_write(int bus, int addr, int subaddr, u8* data, int len)
-{
- struct adb_request req;
- struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
- int retry;
- int rc;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- hdr->bus = bus;
- hdr->address = addr & 0xfe;
- hdr->mode = PMU_I2C_MODE_STDSUB;
- hdr->bus2 = 0;
- hdr->sub_addr = subaddr;
- hdr->comb_addr = addr & 0xfe;
- hdr->count = len;
-
- req.data[0] = PMU_I2C_CMD;
- memcpy(&req.data[sizeof(struct pmu_i2c_hdr) + 1], data, len);
- req.nbytes = sizeof(struct pmu_i2c_hdr) + len + 1;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.reply[0] = 0xff;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- break;
- mdelay(15);
- }
- if (req.reply[0] != PMU_I2C_STATUS_OK)
- return -1;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- mdelay(15);
-
- hdr->bus = PMU_I2C_BUS_STATUS;
- req.reply[0] = 0xff;
-
- req.nbytes = 2;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- return len;
- }
- return -1;
-}
-
-int
-pmu_i2c_simple_read(int bus, int addr, u8* data, int len)
-{
- struct adb_request req;
- struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
- int retry;
- int rc;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- hdr->bus = bus;
- hdr->address = addr | 1;
- hdr->mode = PMU_I2C_MODE_SIMPLE;
- hdr->bus2 = 0;
- hdr->sub_addr = 0;
- hdr->comb_addr = 0;
- hdr->count = len;
-
- req.data[0] = PMU_I2C_CMD;
- req.nbytes = sizeof(struct pmu_i2c_hdr) + 1;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.reply[0] = 0xff;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- break;
- mdelay(15);
- }
- if (req.reply[0] != PMU_I2C_STATUS_OK)
- return -1;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- mdelay(15);
-
- hdr->bus = PMU_I2C_BUS_STATUS;
- req.reply[0] = 0xff;
-
- req.nbytes = 2;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_DATAREAD) {
- memcpy(data, &req.reply[1], req.reply_len - 1);
- return req.reply_len - 1;
- }
- }
- return -1;
-}
-
-int
-pmu_i2c_simple_write(int bus, int addr, u8* data, int len)
-{
- struct adb_request req;
- struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
- int retry;
- int rc;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- hdr->bus = bus;
- hdr->address = addr & 0xfe;
- hdr->mode = PMU_I2C_MODE_SIMPLE;
- hdr->bus2 = 0;
- hdr->sub_addr = 0;
- hdr->comb_addr = 0;
- hdr->count = len;
-
- req.data[0] = PMU_I2C_CMD;
- memcpy(&req.data[sizeof(struct pmu_i2c_hdr) + 1], data, len);
- req.nbytes = sizeof(struct pmu_i2c_hdr) + len + 1;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.reply[0] = 0xff;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- break;
- mdelay(15);
- }
- if (req.reply[0] != PMU_I2C_STATUS_OK)
- return -1;
-
- for (retry=0; retry<16; retry++) {
- memset(&req, 0, sizeof(req));
-
- mdelay(15);
-
- hdr->bus = PMU_I2C_BUS_STATUS;
- req.reply[0] = 0xff;
-
- req.nbytes = 2;
- req.reply_expected = 0;
- req.reply_len = 0;
- req.data[0] = PMU_I2C_CMD;
- rc = pmu_queue_request(&req);
- if (rc)
- return rc;
- while(!req.complete)
- pmu_poll();
- if (req.reply[0] == PMU_I2C_STATUS_OK)
- return len;
- }
- return -1;
-}
-
#ifdef CONFIG_PM
static LIST_HEAD(sleep_notifiers);
return -EBUSY;
}
- /* Disable clock spreading on some machines */
- pmac_tweak_clock_spreading(0);
-
/* Stop preemption */
preempt_disable();
mdelay(10);
preempt_enable();
- /* Re-enable clock spreading on some machines */
- pmac_tweak_clock_spreading(1);
-
/* Resume devices */
device_resume();
subsys_initcall(init_pmu_sysfs);
EXPORT_SYMBOL(pmu_request);
+EXPORT_SYMBOL(pmu_queue_request);
EXPORT_SYMBOL(pmu_poll);
EXPORT_SYMBOL(pmu_poll_adb);
EXPORT_SYMBOL(pmu_wait_complete);
EXPORT_SYMBOL(pmu_suspend);
EXPORT_SYMBOL(pmu_resume);
EXPORT_SYMBOL(pmu_unlock);
-EXPORT_SYMBOL(pmu_i2c_combined_read);
-EXPORT_SYMBOL(pmu_i2c_stdsub_write);
-EXPORT_SYMBOL(pmu_i2c_simple_read);
-EXPORT_SYMBOL(pmu_i2c_simple_write);
#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
EXPORT_SYMBOL(pmu_enable_irled);
EXPORT_SYMBOL(pmu_battery_count);
projects / linux-2.6-omap-h63xx.git / commitdiff