* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
ieee1394: sbp2: fix race condition in state change
ieee1394: fix list corruption (reported at module removal)
firewire: fw-sbp2: another iPod mini quirk entry
ieee1394: sbp2: another iPod mini quirk entry
1.3 sparc64
1.4 ppc
1.5 SuperH
+1.6 Blackfin
2. "Policy" / "Governor"?
2.1 Policy
SH-3
SH-4
+1.6 Blackfin
+------------
+
+The following Blackfin processors are supported by cpufreq:
+
+BF522, BF523, BF524, BF525, BF526, BF527, Rev 0.1 or higher
+BF531, BF532, BF533, Rev 0.3 or higher
+BF534, BF536, BF537, Rev 0.2 or higher
+BF561, Rev 0.3 or higher
+BF542, BF544, BF547, BF548, BF549, Rev 0.1 or higher
+
2. "Policy" / "Governor" ?
==========================
archive and links it into the resulting kernel binary. By default, this
archive is empty (consuming 134 bytes on x86).
-The config option CONFIG_INITRAMFS_SOURCE (for some reason buried under
-devices->block devices in menuconfig, and living in usr/Kconfig) can be used
-to specify a source for the initramfs archive, which will automatically be
-incorporated into the resulting binary. This option can point to an existing
-gzipped cpio archive, a directory containing files to be archived, or a text
-file specification such as the following example:
+The config option CONFIG_INITRAMFS_SOURCE (in General Setup in menuconfig,
+and living in usr/Kconfig) can be used to specify a source for the
+initramfs archive, which will automatically be incorporated into the
+resulting binary. This option can point to an existing gzipped cpio
+archive, a directory containing files to be archived, or a text file
+specification such as the following example:
dir /dev 755 0 0
nod /dev/console 644 0 0 c 5 1
static struct input_dev *button_dev;
-static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
+static irqreturn_t button_interrupt(int irq, void *dummy)
{
input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
input_sync(button_dev);
+ return IRQ_HANDLED;
}
static int __init button_init(void)
ref Reference board
dell-m4-1 Dell desktops
dell-m4-2 Dell desktops
+ dell-m4-3 Dell desktops
STAC92HD73*
ref Reference board
- dell-m6 Dell desktops
+ dell-m6-amic Dell desktops/laptops with analog mics
+ dell-m6-dmic Dell desktops/laptops with digital mics
+ dell-m6 Dell desktops/laptops with both type of mics
STAC9872
vaio Setup for VAIO FE550G/SZ110
$ cat /debug/tracing/trace_pipe > mydump.txt &
Start X or whatever.
$ echo "X is up" > /debug/tracing/trace_marker
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
Check for lost events.
do.
Shut down mmiotrace (requires root privileges):
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
The 'cat' process exits. If it does not, kill it by issuing 'fg' command and
pressing ctrl+c.
$ cat /debug/tracing/trace_entries
gives you a number. Approximately double this number and write it back, for
instance:
+$ echo 0 > /debug/tracing/tracing_enabled
$ echo 128000 > /debug/tracing/trace_entries
+$ echo 1 > /debug/tracing/tracing_enabled
Then start again from the top.
If you are doing a trace for a driver project, e.g. Nouveau, you should also
# task_pt_regs() in asm/processor.h or asm/ptrace.h
# arch_has_single_step() if there is hardware single-step support
# arch_has_block_step() if there is hardware block-step support
-# arch_ptrace() and not #define __ARCH_SYS_PTRACE
-# compat_arch_ptrace() and #define __ARCH_WANT_COMPAT_SYS_PTRACE
# asm/syscall.h supplying asm-generic/syscall.h interface
# linux/regset.h user_regset interfaces
# CORE_DUMP_USE_REGSET #define'd in linux/elf.h
return PCI_SLOT(dev->devfn);
}
-void __devinit
+void
pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
struct resource *res)
{
/*
* Where secondaries begin a life of C.
*/
-void __init
+void __cpuinit
smp_callin(void)
{
int cpuid = hard_smp_processor_id();
* Send a message to a secondary's console. "START" is one such
* interesting message. ;-)
*/
-static void __init
+static void __cpuinit
send_secondary_console_msg(char *str, int cpuid)
{
struct percpu_struct *cpu;
/*
* Convince the console to have a secondary cpu begin execution.
*/
-static int __init
+static int __cpuinit
secondary_cpu_start(int cpuid, struct task_struct *idle)
{
struct percpu_struct *cpu;
static int opDEC_fix;
-static void __init
+static void __cpuinit
opDEC_check(void)
{
__asm__ __volatile__ (
return;
}
-void __init
+void __cpuinit
trap_init(void)
{
/* Tell PAL-code what global pointer we want in the kernel. */
# CONFIG_MACH_AKITA is not set
# CONFIG_MACH_SPITZ is not set
# CONFIG_MACH_BORZOI is not set
-CONFIG_MACH_TOSA=y
+# CONFIG_MACH_TOSA is not set
# CONFIG_ARCH_VIPER is not set
# CONFIG_ARCH_PXA_ESERIES is not set
# CONFIG_TRIZEPS_PXA is not set
u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
/* Devices prepare suspend */
- is_bt_on = gpio_get_value(GPIO83_BT_ON);
+ is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
1:
mov r0, #0xa0000000 @ Don't suppose memory access works
orr r0, r0, #0x00200000 @ even if it's supposed to
+ orr r0, r0, #0x0000b000
mov r1, #0
str r1, [r0] @ Early disable resume for next boot
ldr r0, mioa701_jumpaddr @ (Murphy's Law)
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
+ GPIO14_GPIO, /* SD detect */
+ GPIO114_GPIO, /* SD power */
+ GPIO115_GPIO, /* SD r/o switch */
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO31_AC97_SYNC,
/* IrDA */
+ GPIO40_GPIO, /* ir disable */
GPIO46_FICP_RXD,
GPIO47_FICP_TXD,
GPIO16_PWM0_OUT,
/* USB */
- GPIO13_GPIO,
+ GPIO13_GPIO, /* usb detect */
+ GPIO95_GPIO, /* usb power */
/* PCMCIA */
GPIO48_nPOE,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
+ GPIO94_GPIO, /* wifi power 1 */
+ GPIO108_GPIO, /* wifi power 2 */
+ GPIO116_GPIO, /* wifi ready */
+
+ /* MATRIX KEYPAD */
+ GPIO100_KP_MKIN_0,
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO97_KP_MKIN_3,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* MISC. */
+ GPIO10_GPIO, /* hotsync button */
+ GPIO12_GPIO, /* power detect */
+ GPIO107_GPIO, /* earphone detect */
};
/******************************************************************************
int err = 0;
/* Setup an interrupt for detecting card insert/remove events */
- err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
- IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ");
+ if (err)
+ goto err;
+ err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N);
+ if (err)
+ goto err2;
+ err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N),
+ palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"SD/MMC card detect", data);
if (err) {
printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
__func__);
- return err;
+ goto err2;
}
err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
if (err)
- goto pwr_err;
+ goto err3;
+ err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0);
+ if (err)
+ goto err4;
err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
if (err)
- goto ro_err;
+ goto err4;
+ err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY);
+ if (err)
+ goto err5;
printk(KERN_DEBUG "%s: irq registered\n", __func__);
return 0;
-ro_err:
+err5:
+ gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+err4:
gpio_free(GPIO_NR_PALMTX_SD_POWER);
-pwr_err:
- free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+err3:
+ free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+err2:
+ gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
+err:
return err;
}
{
gpio_free(GPIO_NR_PALMTX_SD_READONLY);
gpio_free(GPIO_NR_PALMTX_SD_POWER);
- free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+ free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+ gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
}
static void palmtx_mci_power(struct device *dev, unsigned int vdd)
KEY(3, 0, KEY_RIGHT),
KEY(3, 2, KEY_LEFT),
-
};
static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
if (ret)
goto err;
+ ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0);
+ if (ret)
+ goto err2;
ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
if (ret)
goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0);
+ if (ret)
+ goto err3;
return 0;
+err3:
+ gpio_free(GPIO_NR_PALMTX_LCD_POWER);
err2:
gpio_free(GPIO_NR_PALMTX_BL_POWER);
err:
/******************************************************************************
* IrDA
******************************************************************************/
+static int palmtx_irda_startup(struct device *dev)
+{
+ int err;
+ err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE");
+ if (err)
+ goto err;
+ err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1);
+ if (err)
+ gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+err:
+ return err;
+}
+
+static void palmtx_irda_shutdown(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+}
+
static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
{
gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
}
static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+ .startup = palmtx_irda_startup,
+ .shutdown = palmtx_irda_shutdown,
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
.transceiver_mode = palmtx_irda_transceiver_mode,
};
/******************************************************************************
* UDC
******************************************************************************/
-static void palmtx_udc_command(int cmd)
-{
- gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
- udelay(50);
- gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
-}
-
static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
.gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N,
.gpio_vbus_inverted = 1,
- .udc_command = palmtx_udc_command,
+ .gpio_pullup = GPIO_NR_PALMTX_USB_POWER,
+ .gpio_pullup_inverted = 0,
};
/******************************************************************************
ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
if (ret)
- goto err_cs_ac;
-
- ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+ goto err1;
+ ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT);
if (ret)
- goto err_cs_usb;
+ goto err2;
return 0;
-err_cs_usb:
+err2:
gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
-err_cs_ac:
+err1:
return ret;
}
return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
}
-static int palmtx_is_usb_online(void)
-{
- return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
-}
-
static void power_supply_exit(struct device *dev)
{
- gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
}
static struct pda_power_pdata power_supply_info = {
.init = power_supply_init,
.is_ac_online = palmtx_is_ac_online,
- .is_usb_online = palmtx_is_usb_online,
.exit = power_supply_exit,
.supplied_to = palmtx_supplicants,
.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
}
+/* setup udc GPIOs initial state */
+static void __init palmtx_udc_init(void)
+{
+ if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
+ gpio_free(GPIO_NR_PALMTX_USB_POWER);
+ }
+}
+
+
static void __init palmtx_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
set_pxa_fb_info(&palmtx_lcd_screen);
pxa_set_mci_info(&palmtx_mci_platform_data);
+ palmtx_udc_init();
pxa_set_udc_info(&palmtx_udc_info);
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmtx_ficp_platform_data);
.gpio = NR_BUILTIN_GPIO + 1,
}, {
.bus_id = 0, /* Must match with the camera ID above */
+ .gpio = -ENXIO,
}
};
#define OMAP24XX_GPIO_IRQSTATUS2 0x0028
#define OMAP24XX_GPIO_IRQENABLE2 0x002c
#define OMAP24XX_GPIO_IRQENABLE1 0x001c
+#define OMAP24XX_GPIO_WAKE_EN 0x0020
#define OMAP24XX_GPIO_CTRL 0x0030
#define OMAP24XX_GPIO_OE 0x0034
#define OMAP24XX_GPIO_DATAIN 0x0038
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
- wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA;
+ wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
break;
{
int i;
- if (!cpu_is_omap24xx() && !cpu_is_omap16xx())
+ if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
return 0;
for (i = 0; i < gpio_bank_count; i++) {
* clk_allow_idle - Counters previous clk_deny_idle
* @clk: clock signal handle
*/
-void clk_deny_idle(struct clk *clk);
+void clk_allow_idle(struct clk *clk);
extern void omap_pm_idle(void);
extern void omap_pm_suspend(void);
#define arch_has_block_step() (1)
extern void user_enable_block_step(struct task_struct *);
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#endif /* !__KERNEL__ */
/* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */
* sn_pci_controller_fixup() - This routine sets up a bus's resources
* consistent with the Linux PCI abstraction layer.
*/
-static void
+static void __init
sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
{
s64 status = 0;
/*
* References to members of the boot_cpu_data structure.
*/
- .text
+.section .text.head, "ax"
.global start_kernel
.global __bss_start
.global _end
/*
* AP startup routine
*/
- .text
.global eit_vector
ENTRY(startup_AP)
;; setup EVB
nop
#endif /* CONFIG_SMP */
+ .text
ENTRY(stack_start)
.long init_thread_union+8192
.long __KERNEL_DS
_text = .; /* Text and read-only data */
.boot : { *(.boot) } = 0
.text : {
+ *(.text.head)
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
#include <asm/break.h>
-#define BUG() \
-do { \
- __asm__ __volatile__("break %0" : : "i" (BRK_BUG)); \
-} while (0)
+static inline void __noreturn BUG(void)
+{
+ __asm__ __volatile__("break %0" : : "i" (BRK_BUG));
+ /* Fool GCC into thinking the function doesn't return. */
+ while (1)
+ ;
+}
#define HAVE_ARCH_BUG
#if (_MIPS_ISA > _MIPS_ISA_MIPS1)
-#define BUG_ON(condition) \
-do { \
- __asm__ __volatile__("tne $0, %0, %1" \
- : : "r" (condition), "i" (BRK_BUG)); \
-} while (0)
+static inline void __BUG_ON(unsigned long condition)
+{
+ if (__builtin_constant_p(condition)) {
+ if (condition)
+ BUG();
+ else
+ return;
+ }
+ __asm__ __volatile__("tne $0, %0, %1"
+ : : "r" (condition), "i" (BRK_BUG));
+}
+
+#define BUG_ON(C) __BUG_ON((unsigned long)(C))
#define HAVE_ARCH_BUG_ON
#ifndef _ASM_PTRACE_H
#define _ASM_PTRACE_H
-#ifdef CONFIG_64BIT
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-#endif
-
/* 0 - 31 are integer registers, 32 - 63 are fp registers. */
#define FPR_BASE 32
#define PC 64
} else {
switch (cur) {
/* Bxx (d8,PC) */
- case 0xc0:
- case 0xc1:
- case 0xc2:
- case 0xc3:
- case 0xc4:
- case 0xc5:
- case 0xc6:
- case 0xc7:
- case 0xc8:
- case 0xc9:
- case 0xca:
+ case 0xc0 ... 0xca:
if (gdbstub_read_byte(pc + 1, (u8 *) &x) < 0)
goto fault;
if (!__gdbstub_mark_bp(pc + 2, 0))
break;
/* LXX (d8,PC) */
- case 0xd0:
- case 0xd1:
- case 0xd2:
- case 0xd3:
- case 0xd4:
- case 0xd5:
- case 0xd6:
- case 0xd7:
- case 0xd8:
- case 0xd9:
- case 0xda:
+ case 0xd0 ... 0xda:
if (!__gdbstub_mark_bp(pc + 1, 0))
goto fault;
if (regs->pc != regs->lar &&
#define to_parisc_driver(d) container_of(d, struct parisc_driver, drv)
#define parisc_parent(d) to_parisc_device(d->dev.parent)
-static inline char *parisc_pathname(struct parisc_device *d)
+static inline const char *parisc_pathname(struct parisc_device *d)
{
- return d->dev.bus_id;
+ return dev_name(&d->dev);
}
static inline void
typedef unsigned long __kernel_size_t;
typedef long __kernel_ssize_t;
typedef long __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
#else
typedef unsigned int __kernel_size_t;
typedef int __kernel_ssize_t;
typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
#endif
+typedef long __kernel_time_t;
typedef char * __kernel_caddr_t;
typedef unsigned short __kernel_uid16_t;
#define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
struct task_struct;
#define arch_has_single_step() 1
void user_disable_single_step(struct task_struct *task);
EXPORT_SYMBOL(hppa_dma_ops);
static struct device root = {
- .bus_id = "parisc",
+ .init_name = "parisc",
};
static inline int check_dev(struct device *dev)
static void setup_bus_id(struct parisc_device *padev)
{
struct hardware_path path;
- char *output = padev->dev.bus_id;
+ char name[20];
+ char *output = name;
int i;
get_node_path(padev->dev.parent, &path);
output += sprintf(output, "%u:", (unsigned char) path.bc[i]);
}
sprintf(output, "%u", (unsigned char) padev->hw_path);
+ dev_set_name(&padev->dev, name);
}
struct parisc_device * create_tree_node(char id, struct device *parent)
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/console.h>
-#include <linux/kallsyms.h>
#include <linux/bug.h>
#include <asm/assembly.h>
DEFINE_SPINLOCK(pa_dbit_lock);
#endif
-void parisc_show_stack(struct task_struct *t, unsigned long *sp,
+static void parisc_show_stack(struct task_struct *task, unsigned long *sp,
struct pt_regs *regs);
static int printbinary(char *buf, unsigned long x, int nbits)
void show_regs(struct pt_regs *regs)
{
- int i;
+ int i, user;
char *level;
unsigned long cr30, cr31;
- level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT;
+ user = user_mode(regs);
+ level = user ? KERN_DEBUG : KERN_CRIT;
print_gr(level, regs);
for (i = 0; i < 8; i += 4)
PRINTREGS(level, regs->sr, "sr", RFMT, i);
- if (user_mode(regs))
+ if (user)
print_fr(level, regs);
cr30 = mfctl(30);
printk("%s CPU: %8d CR30: " RFMT " CR31: " RFMT "\n",
level, current_thread_info()->cpu, cr30, cr31);
printk("%s ORIG_R28: " RFMT "\n", level, regs->orig_r28);
- printk(level);
- print_symbol(" IAOQ[0]: %s\n", regs->iaoq[0]);
- printk(level);
- print_symbol(" IAOQ[1]: %s\n", regs->iaoq[1]);
- printk(level);
- print_symbol(" RP(r2): %s\n", regs->gr[2]);
-
- parisc_show_stack(current, NULL, regs);
+
+ if (user) {
+ printk("%s IAOQ[0]: " RFMT "\n", level, regs->iaoq[0]);
+ printk("%s IAOQ[1]: " RFMT "\n", level, regs->iaoq[1]);
+ printk("%s RP(r2): " RFMT "\n", level, regs->gr[2]);
+ } else {
+ printk("%s IAOQ[0]: %pS\n", level, (void *) regs->iaoq[0]);
+ printk("%s IAOQ[1]: %pS\n", level, (void *) regs->iaoq[1]);
+ printk("%s RP(r2): %pS\n", level, (void *) regs->gr[2]);
+
+ parisc_show_stack(current, NULL, regs);
+ }
}
break;
if (__kernel_text_address(info->ip)) {
- printk("%s [<" RFMT ">] ", (i&0x3)==1 ? KERN_CRIT : "", info->ip);
-#ifdef CONFIG_KALLSYMS
- print_symbol("%s\n", info->ip);
-#else
- if ((i & 0x03) == 0)
- printk("\n");
-#endif
+ printk(KERN_CRIT " [<" RFMT ">] %pS\n",
+ info->ip, (void *) info->ip);
i++;
}
}
- printk("\n");
+ printk(KERN_CRIT "\n");
}
-void parisc_show_stack(struct task_struct *task, unsigned long *sp,
+static void parisc_show_stack(struct task_struct *task, unsigned long *sp,
struct pt_regs *regs)
{
struct unwind_frame_info info;
#size-cells = <1>;
aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
+ ethernet0 = &enet1;
+ ethernet1 = &enet0;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
compatible = "fsl,mpc8572-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
+ cache-size = <0x100000>; // L2, 1M
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 10:49:16 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC4xx_GPIO is not set
+CONFIG_XILINX_VIRTEX=y
+# CONFIG_ACADIA is not set
+# CONFIG_EP405 is not set
+# CONFIG_HCU4 is not set
+# CONFIG_KILAUEA is not set
+# CONFIG_MAKALU is not set
+# CONFIG_WALNUT is not set
+CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
+# CONFIG_PPC40x_SIMPLE is not set
+CONFIG_XILINX_VIRTEX_II_PRO=y
+CONFIG_XILINX_VIRTEX_4_FX=y
+CONFIG_IBM405_ERR77=y
+CONFIG_IBM405_ERR51=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_XILINX_SYSACE=y
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_XILINX_XPS_PS2=y
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_XILINX_HWICAP=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 09:20:16 2008
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 10:31:16 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
#
# CONFIG_KATMAI is not set
# CONFIG_RAINIER is not set
# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
# CONFIG_YOSEMITE is not set
CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
+# CONFIG_PPC44x_SIMPLE is not set
+# CONFIG_PPC4xx_GPIO is not set
CONFIG_XILINX_VIRTEX=y
CONFIG_XILINX_VIRTEX_5_FXT=y
# CONFIG_IPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
+CONFIG_OF_GPIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
+CONFIG_XILINX_SYSACE=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+CONFIG_SERIO_XILINX_XPS_PS2=y
# CONFIG_GAMEPORT is not set
#
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
-CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
#
-# I2C system bus drivers (mostly embedded / system-on-chip)
+# Memory mapped GPIO expanders:
#
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
+CONFIG_GPIO_XILINX=y
#
-# External I2C/SMBus adapter drivers
+# I2C GPIO expanders:
#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
+# PCI GPIO expanders:
#
-# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_GPIO_BT8XX is not set
#
-# Other I2C/SMBus bus drivers
+# SPI GPIO expanders:
#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-CONFIG_I2C_DEBUG_CORE=y
-CONFIG_I2C_DEBUG_ALGO=y
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_IBM_GXT4500 is not set
CONFIG_FB_XILINX=y
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Kernel hacking
#
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:11:37 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:12:40 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:12:56 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:10:16 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
-# CONFIG_BLK_DEV_SD is not set
+CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-# CONFIG_GIANFAR is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_PPC_CLOCK=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:12:22 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:11:02 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
CONFIG_PATA_MPC52xx=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_MPC5200_WDT is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
#
# LED drivers
#
+# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:13:19 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:13:16 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_PPC_SOC is not set
CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=m
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=m
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
CONFIG_PPC_CLOCK=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:12:39 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:09:30 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
CONFIG_PATA_MPC52xx=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
#
# MII PHY device drivers
#
-CONFIG_MARVELL_PHY=y
+# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Fri Jan 18 14:19:54 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:09:07 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
-CONFIG_PPC_MPC5200=y
-CONFIG_PPC_MPC5200_BUGFIX=y
CONFIG_PPC_MPC5200_SIMPLE=y
CONFIG_PPC_EFIKA=y
CONFIG_PPC_LITE5200=y
+CONFIG_PPC_MPC5200_BUGFIX=y
+# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
CONFIG_PPC_NATIVE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_PPC_BESTCOMM=y
CONFIG_PPC_BESTCOMM_ATA=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
-# CONFIG_HIBERNATION is not set
+CONFIG_SUSPEND_FREEZER=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_PATA_OF_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# Input device support
#
-# CONFIG_INPUT is not set
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# Character devices
#
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
#
-# I2C Algorithms
+# I2C Hardware Bus support
#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
# CONFIG_MPC5200_WDT is not set
# CONFIG_WATCHDOG_RTAS is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# Graphics support
#
# CONFIG_AGP is not set
-# CONFIG_DRM is not set
+CONFIG_DRM=y
+# CONFIG_DRM_TDFX is not set
+# CONFIG_DRM_R128 is not set
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_DDC=y
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
#
# Display device support
# CONFIG_DISPLAY_SUPPORT is not set
#
-# Sound
-#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+# CONFIG_HID_APPLE is not set
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+# CONFIG_HID_CHICONY is not set
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_CLASS is not set
#
# LED drivers
#
# LED Triggers
#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 08:56:44 2008
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 09:54:44 2008
#
# CONFIG_PPC64 is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
+CONFIG_XILINX_SYSACE=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# Hardware I/O ports
#
-# CONFIG_SERIO is not set
+CONFIG_SERIO=m
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_XILINX_XPS_PS2=m
# CONFIG_GAMEPORT is not set
#
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
#
# I2C GPIO expanders:
#
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
+CONFIG_FB=m
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=m
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:28:58 2008
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 10:06:19 2008
#
# CONFIG_PPC64 is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
+CONFIG_XILINX_SYSACE=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# Hardware I/O ports
#
-# CONFIG_SERIO is not set
+CONFIG_SERIO=m
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_XILINX_XPS_PS2=m
# CONFIG_GAMEPORT is not set
#
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
#
# I2C GPIO expanders:
#
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=m
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=m
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
unsigned long pstart, unsigned long prot,
int psize, int ssize);
-extern void set_huge_psize(int psize);
extern void add_gpage(unsigned long addr, unsigned long page_size,
unsigned long number_of_pages);
extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);
#ifdef __powerpc64__
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */
#define STACK_FRAME_LR_SAVE 2 /* Location of LR in stack frame */
#define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265)
blr
_GLOBAL(__setup_cpu_460ex)
_GLOBAL(__setup_cpu_460gt)
- b __init_fpu_44x
+ mflr r4
+ bl __init_fpu_44x
+ bl __fixup_440A_mcheck
+ mtlr r4
+ blr
+
_GLOBAL(__setup_cpu_440gx)
_GLOBAL(__setup_cpu_440spe)
b __fixup_440A_mcheck
beq- 1f
ld r1,PACAKSAVE(r13)
1: std r10,0(r1)
- crclr so
std r11,_NIP(r1)
std r12,_MSR(r1)
std r0,GPR0(r1)
std r10,GPR1(r1)
ACCOUNT_CPU_USER_ENTRY(r10, r11)
+ /*
+ * This "crclr so" clears CR0.SO, which is the error indication on
+ * return from this system call. There must be no cmp instruction
+ * between it and the "mfcr r9" below, otherwise if XER.SO is set,
+ * CR0.SO will get set, causing all system calls to appear to fail.
+ */
+ crclr so
std r2,GPR2(r1)
std r3,GPR3(r1)
std r4,GPR4(r1)
* parsing
*/
dn = pci_device_to_OF_node(pdev);
- if (dn)
- return of_irq_map_one(dn, 0, out_irq);
+ if (dn) {
+ rc = of_irq_map_one(dn, 0, out_irq);
+ if (!rc)
+ return rc;
+ }
/* Ok, we don't, time to have fun. Let's start by building up an
* interrupt spec. we assume #interrupt-cells is 1, which is standard
BUG_ON(!c->hotpluggable);
+#ifdef CONFIG_PPC64
if (!firmware_has_feature(FW_FEATURE_ISERIES) &&
cpu_has_feature(CPU_FTR_SMT))
sysdev_remove_file(s, &attr_smt_snooze_delay);
+#endif
/* PMC stuff */
switch (cur_cpu_spec->pmc_type) {
unsigned long __init mmu_mapin_ram(void)
{
- unsigned long v, s;
+ unsigned long v, s, mapped;
phys_addr_t p;
v = KERNELBASE;
s -= LARGE_PAGE_SIZE_4M;
}
- return total_lowmem - s;
+ mapped = total_lowmem - s;
+
+ /* If the size of RAM is not an exact power of two, we may not
+ * have covered RAM in its entirety with 16 and 4 MiB
+ * pages. Consequently, restrict the top end of RAM currently
+ * allocable so that calls to the LMB to allocate PTEs for "tail"
+ * coverage with normal-sized pages (or other reasons) do not
+ * attempt to allocate outside the allowed range.
+ */
+
+ __initial_memory_limit_addr = memstart_addr + mapped;
+
+ return mapped;
}
return err;
}
-void set_huge_psize(int psize)
+static void __init set_huge_psize(int psize)
{
/* Check that it is a page size supported by the hardware and
* that it fits within pagetable limits. */
.priority = 1 /* Must run before sched domains notifier. */
};
+static void mark_reserved_regions_for_nid(int nid)
+{
+ struct pglist_data *node = NODE_DATA(nid);
+ int i;
+
+ for (i = 0; i < lmb.reserved.cnt; i++) {
+ unsigned long physbase = lmb.reserved.region[i].base;
+ unsigned long size = lmb.reserved.region[i].size;
+ unsigned long start_pfn = physbase >> PAGE_SHIFT;
+ unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT);
+ struct node_active_region node_ar;
+ unsigned long node_end_pfn = node->node_start_pfn +
+ node->node_spanned_pages;
+
+ /*
+ * Check to make sure that this lmb.reserved area is
+ * within the bounds of the node that we care about.
+ * Checking the nid of the start and end points is not
+ * sufficient because the reserved area could span the
+ * entire node.
+ */
+ if (end_pfn <= node->node_start_pfn ||
+ start_pfn >= node_end_pfn)
+ continue;
+
+ get_node_active_region(start_pfn, &node_ar);
+ while (start_pfn < end_pfn &&
+ node_ar.start_pfn < node_ar.end_pfn) {
+ unsigned long reserve_size = size;
+ /*
+ * if reserved region extends past active region
+ * then trim size to active region
+ */
+ if (end_pfn > node_ar.end_pfn)
+ reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
+ - (start_pfn << PAGE_SHIFT);
+ dbg("reserve_bootmem %lx %lx nid=%d\n", physbase,
+ reserve_size, node_ar.nid);
+ reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
+ reserve_size, BOOTMEM_DEFAULT);
+ /*
+ * if reserved region is contained in the active region
+ * then done.
+ */
+ if (end_pfn <= node_ar.end_pfn)
+ break;
+
+ /*
+ * reserved region extends past the active region
+ * get next active region that contains this
+ * reserved region
+ */
+ start_pfn = node_ar.end_pfn;
+ physbase = start_pfn << PAGE_SHIFT;
+ size = size - reserve_size;
+ get_node_active_region(start_pfn, &node_ar);
+ }
+ }
+}
+
+
void __init do_init_bootmem(void)
{
int nid;
get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
- /* Allocate the node structure node local if possible */
+ /*
+ * Allocate the node structure node local if possible
+ *
+ * Be careful moving this around, as it relies on all
+ * previous nodes' bootmem to be initialized and have
+ * all reserved areas marked.
+ */
NODE_DATA(nid) = careful_allocation(nid,
sizeof(struct pglist_data),
SMP_CACHE_BYTES, end_pfn);
start_pfn, end_pfn);
free_bootmem_with_active_regions(nid, end_pfn);
- }
-
- /* Mark reserved regions */
- for (i = 0; i < lmb.reserved.cnt; i++) {
- unsigned long physbase = lmb.reserved.region[i].base;
- unsigned long size = lmb.reserved.region[i].size;
- unsigned long start_pfn = physbase >> PAGE_SHIFT;
- unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT);
- struct node_active_region node_ar;
-
- get_node_active_region(start_pfn, &node_ar);
- while (start_pfn < end_pfn &&
- node_ar.start_pfn < node_ar.end_pfn) {
- unsigned long reserve_size = size;
- /*
- * if reserved region extends past active region
- * then trim size to active region
- */
- if (end_pfn > node_ar.end_pfn)
- reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
- - (start_pfn << PAGE_SHIFT);
- dbg("reserve_bootmem %lx %lx nid=%d\n", physbase,
- reserve_size, node_ar.nid);
- reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
- reserve_size, BOOTMEM_DEFAULT);
- /*
- * if reserved region is contained in the active region
- * then done.
- */
- if (end_pfn <= node_ar.end_pfn)
- break;
-
- /*
- * reserved region extends past the active region
- * get next active region that contains this
- * reserved region
- */
- start_pfn = node_ar.end_pfn;
- physbase = start_pfn << PAGE_SHIFT;
- size = size - reserve_size;
- get_node_active_region(start_pfn, &node_ar);
- }
-
- }
-
- for_each_online_node(nid)
+ /*
+ * Be very careful about moving this around. Future
+ * calls to careful_allocation() depend on this getting
+ * done correctly.
+ */
+ mark_reserved_regions_for_nid(nid);
sparse_memory_present_with_active_regions(nid);
+ }
}
void __init paging_init(void)
struct axon_msic *msic = get_irq_data(irq);
u32 write_offset, msi;
int idx;
+ int retry = 0;
write_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG);
pr_debug("axon_msi: original write_offset 0x%x\n", write_offset);
/* write_offset doesn't wrap properly, so we have to mask it */
write_offset &= MSIC_FIFO_SIZE_MASK;
- while (msic->read_offset != write_offset) {
+ while (msic->read_offset != write_offset && retry < 100) {
idx = msic->read_offset / sizeof(__le32);
msi = le32_to_cpu(msic->fifo_virt[idx]);
msi &= 0xFFFF;
pr_debug("axon_msi: woff %x roff %x msi %x\n",
write_offset, msic->read_offset, msi);
+ if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) {
+ generic_handle_irq(msi);
+ msic->fifo_virt[idx] = cpu_to_le32(0xffffffff);
+ } else {
+ /*
+ * Reading the MSIC_WRITE_OFFSET_REG does not
+ * reliably flush the outstanding DMA to the
+ * FIFO buffer. Here we were reading stale
+ * data, so we need to retry.
+ */
+ udelay(1);
+ retry++;
+ pr_debug("axon_msi: invalid irq 0x%x!\n", msi);
+ continue;
+ }
+
+ if (retry) {
+ pr_debug("axon_msi: late irq 0x%x, retry %d\n",
+ msi, retry);
+ retry = 0;
+ }
+
msic->read_offset += MSIC_FIFO_ENTRY_SIZE;
msic->read_offset &= MSIC_FIFO_SIZE_MASK;
+ }
- if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host)
- generic_handle_irq(msi);
- else
- pr_debug("axon_msi: invalid irq 0x%x!\n", msi);
+ if (retry) {
+ printk(KERN_WARNING "axon_msi: irq timed out\n");
+
+ msic->read_offset += MSIC_FIFO_ENTRY_SIZE;
+ msic->read_offset &= MSIC_FIFO_SIZE_MASK;
}
desc->chip->eoi(irq);
dn->full_name);
goto out_free_fifo;
}
+ memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES);
msic->irq_host = irq_alloc_host(dn, IRQ_HOST_MAP_NOMAP,
NR_IRQS, &msic_host_ops, 0);
return cpus_weight(cpu_possible_map);
}
-static void __devinit smp_iic_setup_cpu(int cpu)
+static void __devinit smp_cell_setup_cpu(int cpu)
{
if (cpu != boot_cpuid)
iic_setup_cpu();
+
+ /*
+ * change default DABRX to allow user watchpoints
+ */
+ mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
}
static DEFINE_SPINLOCK(timebase_lock);
.message_pass = smp_iic_message_pass,
.probe = smp_iic_probe,
.kick_cpu = smp_cell_kick_cpu,
- .setup_cpu = smp_iic_setup_cpu,
+ .setup_cpu = smp_cell_setup_cpu,
.cpu_bootable = smp_cell_cpu_bootable,
};
if (offset >= ps_size)
return VM_FAULT_SIGBUS;
+ if (fatal_signal_pending(current))
+ return VM_FAULT_SIGBUS;
+
/*
* Because we release the mmap_sem, the context may be destroyed while
* we're in spu_wait. Grab an extra reference so it isn't destroyed
answer Y or M. Otherwise say N.
config PPC_BESTCOMM_ATA
- tristate "Bestcomm ATA task support"
+ tristate
depends on PPC_BESTCOMM
- default n
help
This option enables the support for the ATA task.
config PPC_BESTCOMM_FEC
- tristate "Bestcomm FEC tasks support"
+ tristate
depends on PPC_BESTCOMM
- default n
help
This option enables the support for the FEC tasks.
config PPC_BESTCOMM_GEN_BD
- tristate "Bestcomm GenBD tasks support"
+ tristate
depends on PPC_BESTCOMM
- default n
help
This option enables the support for the GenBD tasks.
void __init mpic_init(struct mpic *mpic)
{
int i;
+ int cpu;
BUG_ON(mpic->num_sources == 0);
mpic_pasemi_msi_init(mpic);
+ if (mpic->flags & MPIC_PRIMARY)
+ cpu = hard_smp_processor_id();
+ else
+ cpu = 0;
+
for (i = 0; i < mpic->num_sources; i++) {
/* start with vector = source number, and masked */
u32 vecpri = MPIC_VECPRI_MASK | i |
continue;
/* init hw */
mpic_irq_write(i, MPIC_INFO(IRQ_VECTOR_PRI), vecpri);
- mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION),
- 1 << hard_smp_processor_id());
+ mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), 1 << cpu);
}
/* Init spurious vector */
}
regs = ioremap(res.start, 32);
- printk(KERN_INFO "Xilinx intc at 0x%08LX mapped to 0x%p\n",
- res.start, regs);
+ printk(KERN_INFO "Xilinx intc at 0x%08llx mapped to 0x%p\n",
+ (unsigned long long) res.start, regs);
/* Setup interrupt controller */
out_be32(regs + XINTC_IER, 0); /* disable all irqs */
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 19:43:29 2008
+# Linux kernel version: 2.6.28-rc6
+# Thu Nov 27 11:00:49 2008
#
CONFIG_SCHED_MC=y
CONFIG_MMU=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
+# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
CONFIG_GROUP_SCHED=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Base setup
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
-# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
#
# I/O subsystem configuration
CONFIG_IPL_VM=y
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=9
# CONFIG_PROCESS_DEBUG is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_IUCV=m
+CONFIG_IUCV=y
CONFIG_AFIUCV=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_NF_CONNTRACK_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_ACT_NAT=m
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_CAN_VCAN=m
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_PCMCIA is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
+# CONFIG_C2PORT is not set
#
# SCSI device support
CONFIG_SCSI_DH_ALUA=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
# CONFIG_TR is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
+# CONFIG_REGULATOR is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_ACCESSIBILITY=y
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
#
# Ciphers
#
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
CONFIG_ZCRYPT=m
# CONFIG_ZCRYPT_MONOLITHIC is not set
# Library routines
#
CONFIG_BITREVERSE=m
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
- if (mm->context.has_pgste)
- ptep_rcp_copy(ptep);
pte_val(*ptep) = _PAGE_TYPE_EMPTY;
if (mm->context.noexec)
pte_val(ptep[PTRS_PER_PTE]) = _PAGE_TYPE_EMPTY;
psw_t psw;
unsigned long gprs[NUM_GPRS];
unsigned long orig_gpr2;
+ unsigned short svcnr;
unsigned short ilc;
- unsigned short trap;
};
#endif
extern void user_enable_single_step(struct task_struct *);
extern void user_disable_single_step(struct task_struct *);
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
#define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN)
#define user_stack_pointer(regs)((regs)->gprs[15])
static inline long syscall_get_nr(struct task_struct *task,
struct pt_regs *regs)
{
- if (regs->trap != __LC_SVC_OLD_PSW)
- return -1;
- return regs->gprs[2];
+ return regs->svcnr ? regs->svcnr : -1;
}
static inline void syscall_rollback(struct task_struct *task,
unsigned int i, unsigned int n,
unsigned long *args)
{
+ unsigned long mask = -1UL;
+
BUG_ON(i + n > 6);
#ifdef CONFIG_COMPAT
- if (test_tsk_thread_flag(task, TIF_31BIT)) {
- if (i + n == 6)
- args[--n] = (u32) regs->args[0];
- while (n-- > 0)
- args[n] = (u32) regs->gprs[2 + i + n];
- }
+ if (test_tsk_thread_flag(task, TIF_31BIT))
+ mask = 0xffffffff;
#endif
if (i + n == 6)
- args[--n] = regs->args[0];
- memcpy(args, ®s->gprs[2 + i], n * sizeof(args[0]));
+ args[--n] = regs->args[0] & mask;
+ while (n-- > 0)
+ if (i + n > 0)
+ args[n] = regs->gprs[2 + i + n] & mask;
+ if (i == 0)
+ args[0] = regs->orig_gpr2 & mask;
}
static inline void syscall_set_arguments(struct task_struct *task,
BUG_ON(i + n > 6);
if (i + n == 6)
regs->args[0] = args[--n];
- memcpy(®s->gprs[2 + i], args, n * sizeof(args[0]));
+ while (n-- > 0)
+ if (i + n > 0)
+ regs->gprs[2 + i + n] = args[n];
+ if (i == 0)
+ regs->orig_gpr2 = args[0];
}
#endif /* _ASM_SYSCALL_H */
DEFINE(__PT_GPRS, offsetof(struct pt_regs, gprs));
DEFINE(__PT_ORIG_GPR2, offsetof(struct pt_regs, orig_gpr2));
DEFINE(__PT_ILC, offsetof(struct pt_regs, ilc));
- DEFINE(__PT_TRAP, offsetof(struct pt_regs, trap));
+ DEFINE(__PT_SVCNR, offsetof(struct pt_regs, svcnr));
DEFINE(__PT_SIZE, sizeof(struct pt_regs));
BLANK();
DEFINE(__SF_BACKCHAIN, offsetof(struct stack_frame, back_chain));
return err;
restore_fp_regs(¤t->thread.fp_regs);
- regs->trap = -1; /* disable syscall checks */
+ regs->svcnr = 0; /* disable syscall checks */
return 0;
}
SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 60
SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2
SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC
-SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP
+SP_SVCNR = STACK_FRAME_OVERHEAD + __PT_SVCNR
SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE
_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
.macro CREATE_STACK_FRAME psworg,savearea
s %r15,BASED(.Lc_spsize) # make room for registers & psw
mvc SP_PSW(8,%r15),0(%r12) # move user PSW to stack
- la %r12,\psworg
st %r2,SP_ORIG_R2(%r15) # store original content of gpr 2
- icm %r12,12,__LC_SVC_ILC
+ icm %r12,3,__LC_SVC_ILC
stm %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack
- st %r12,SP_ILC(%r15)
+ st %r12,SP_SVCNR(%r15)
mvc SP_R12(16,%r15),\savearea # move %r12-%r15 to stack
la %r12,0
st %r12,__SF_BACKCHAIN(%r15) # clear back chain
#endif
sysc_do_svc:
l %r9,__LC_THREAD_INFO # load pointer to thread_info struct
- sla %r7,2 # *4 and test for svc 0
+ ltr %r7,%r7 # test for svc 0
bnz BASED(sysc_nr_ok) # svc number > 0
# svc 0: system call number in %r1
cl %r1,BASED(.Lnr_syscalls)
bnl BASED(sysc_nr_ok)
lr %r7,%r1 # copy svc number to %r7
- sla %r7,2 # *4
sysc_nr_ok:
mvc SP_ARGS(4,%r15),SP_R7(%r15)
sysc_do_restart:
+ sth %r7,SP_SVCNR(%r15)
+ sll %r7,2 # svc number *4
l %r8,BASED(.Lsysc_table)
tm __TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
l %r8,0(%r7,%r8) # get system call addr.
sysc_restart:
ni __TI_flags+3(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
l %r7,SP_R2(%r15) # load new svc number
- sla %r7,2
mvc SP_R2(4,%r15),SP_ORIG_R2(%r15) # restore first argument
lm %r2,%r6,SP_R2(%r15) # load svc arguments
b BASED(sysc_do_restart) # restart svc
#
sysc_singlestep:
ni __TI_flags+3(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
- mvi SP_TRAP+1(%r15),0x28 # set trap indication to pgm check
+ mvi SP_SVCNR(%r15),0xff # set trap indication to pgm check
+ mvi SP_SVCNR+1(%r15),0xff
la %r2,SP_PTREGS(%r15) # address of register-save area
l %r1,BASED(.Lhandle_per) # load adr. of per handler
la %r14,BASED(sysc_return) # load adr. of system return
bnl BASED(sysc_tracenogo)
l %r8,BASED(.Lsysc_table)
lr %r7,%r2
- sll %r7,2 # *4
+ sll %r7,2 # svc number *4
l %r8,0(%r7,%r8)
sysc_tracego:
lm %r3,%r6,SP_R3(%r15)
# per was called from kernel, must be kprobes
#
kernel_per:
- mvi SP_TRAP+1(%r15),0x28 # set trap indication to pgm check
+ mvi SP_SVCNR(%r15),0xff # set trap indication to pgm check
+ mvi SP_SVCNR+1(%r15),0xff
la %r2,SP_PTREGS(%r15) # address of register-save area
l %r1,BASED(.Lhandle_per) # load adr. of per handler
la %r14,BASED(sysc_restore)# load adr. of system return
SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 120
SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2
SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC
-SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP
+SP_SVCNR = STACK_FRAME_OVERHEAD + __PT_SVCNR
SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE
STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
.macro CREATE_STACK_FRAME psworg,savearea
aghi %r15,-SP_SIZE # make room for registers & psw
mvc SP_PSW(16,%r15),0(%r12) # move user PSW to stack
- la %r12,\psworg
stg %r2,SP_ORIG_R2(%r15) # store original content of gpr 2
- icm %r12,12,__LC_SVC_ILC
+ icm %r12,3,__LC_SVC_ILC
stmg %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack
- st %r12,SP_ILC(%r15)
+ st %r12,SP_SVCNR(%r15)
mvc SP_R12(32,%r15),\savearea # move %r12-%r15 to stack
la %r12,0
stg %r12,__SF_BACKCHAIN(%r15)
#endif
sysc_do_svc:
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
- slag %r7,%r7,2 # *4 and test for svc 0
+ ltgr %r7,%r7 # test for svc 0
jnz sysc_nr_ok
# svc 0: system call number in %r1
cl %r1,BASED(.Lnr_syscalls)
jnl sysc_nr_ok
lgfr %r7,%r1 # clear high word in r1
- slag %r7,%r7,2 # svc 0: system call number in %r1
sysc_nr_ok:
mvc SP_ARGS(8,%r15),SP_R7(%r15)
sysc_do_restart:
+ sth %r7,SP_SVCNR(%r15)
+ sllg %r7,%r7,2 # svc number * 4
larl %r10,sys_call_table
#ifdef CONFIG_COMPAT
tm __TI_flags+5(%r9),(_TIF_31BIT>>16) # running in 31 bit mode ?
sysc_restart:
ni __TI_flags+7(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
lg %r7,SP_R2(%r15) # load new svc number
- slag %r7,%r7,2 # *4
mvc SP_R2(8,%r15),SP_ORIG_R2(%r15) # restore first argument
lmg %r2,%r6,SP_R2(%r15) # load svc arguments
j sysc_do_restart # restart svc
# _TIF_SINGLE_STEP is set, call do_single_step
#
sysc_singlestep:
- ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
- lhi %r0,__LC_PGM_OLD_PSW
- sth %r0,SP_TRAP(%r15) # set trap indication to pgm check
+ ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
+ xc SP_SVCNR(2,%r15),SP_SVCNR(%r15) # clear svc number
la %r2,SP_PTREGS(%r15) # address of register-save area
larl %r14,sysc_return # load adr. of system return
jg do_single_step # branch to do_sigtrap
lghi %r0,NR_syscalls
clgr %r0,%r2
jnh sysc_tracenogo
- slag %r7,%r2,2 # *4
+ sllg %r7,%r2,2 # svc number *4
lgf %r8,0(%r7,%r10)
sysc_tracego:
lmg %r3,%r6,SP_R3(%r15)
# per was called from kernel, must be kprobes
#
kernel_per:
- lhi %r0,__LC_PGM_OLD_PSW
- sth %r0,SP_TRAP(%r15) # set trap indication to pgm check
+ xc SP_SVCNR(2,%r15),SP_SVCNR(%r15) # clear svc number
la %r2,SP_PTREGS(%r15) # address of register-save area
larl %r14,sysc_restore # load adr. of system ret, no work
jg do_single_step # branch to do_single_step
/*
* Initial thread structure.
*
- * We need to make sure that this is 8192-byte aligned due to the
+ * We need to make sure that this is THREAD_SIZE aligned due to the
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
* debugger stored an invalid system call number. Skip
* the system call and the system call restart handling.
*/
- regs->trap = -1;
+ regs->svcnr = 0;
ret = -1;
}
current->thread.fp_regs.fpc &= FPC_VALID_MASK;
restore_fp_regs(¤t->thread.fp_regs);
- regs->trap = -1; /* disable syscall checks */
+ regs->svcnr = 0; /* disable syscall checks */
return 0;
}
oldset = ¤t->blocked;
/* Are we from a system call? */
- if (regs->trap == __LC_SVC_OLD_PSW) {
+ if (regs->svcnr) {
continue_addr = regs->psw.addr;
restart_addr = continue_addr - regs->ilc;
retval = regs->gprs[2];
case -ERESTART_RESTARTBLOCK:
regs->gprs[2] = -EINTR;
}
- regs->trap = -1; /* Don't deal with this again. */
+ regs->svcnr = 0; /* Don't deal with this again. */
}
/* Get signal to deliver. When running under ptrace, at this point
static ext_int_info_t ext_int_info_cc;
static ext_int_info_t ext_int_etr_cc;
-static u64 jiffies_timer_cc;
+static u64 sched_clock_base_cc;
static DEFINE_PER_CPU(struct clock_event_device, comparators);
*/
unsigned long long sched_clock(void)
{
- return ((get_clock_xt() - jiffies_timer_cc) * 125) >> 9;
+ return ((get_clock_xt() - sched_clock_base_cc) * 125) >> 9;
}
/*
*/
void __init time_init(void)
{
- u64 init_timer_cc;
-
- init_timer_cc = reset_tod_clock();
- jiffies_timer_cc = init_timer_cc - jiffies_64 * CLK_TICKS_PER_JIFFY;
+ sched_clock_base_cc = reset_tod_clock();
/* set xtime */
- tod_to_timeval(init_timer_cc - TOD_UNIX_EPOCH, &xtime);
+ tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime);
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
delta = -delta;
adjust.offset = -ticks * (1000000 / HZ);
}
- jiffies_timer_cc += delta;
+ sched_clock_base_cc += delta;
if (adjust.offset != 0) {
printk(KERN_NOTICE "etr: time adjusted by %li micro-seconds\n",
adjust.offset);
* Written by Martin Schwidefsky (schwidefsky@de.ibm.com)
*/
+#include <asm/thread_info.h>
#include <asm/page.h>
#include <asm-generic/vmlinux.lds.h>
}
_edata = .; /* End of data section */
- . = ALIGN(2 * PAGE_SIZE); /* init_task */
+ . = ALIGN(THREAD_SIZE); /* init_task */
.data.init_task : {
*(.data.init_task)
}
};
extern struct global_reg_snapshot global_reg_snapshot[NR_CPUS];
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#define force_successful_syscall_return() \
do { current_thread_info()->syscall_noerror = 1; \
} while (0)
unsigned int fsr_storage;
-void __init cpu_probe(void)
+void __cpuinit cpu_probe(void)
{
int psr_impl, psr_vers, fpu_vers;
int i, psr;
.align 4
/* The Sparc trap table, bootloader gives us control at _start. */
- .text
+ .section .text.head,"ax"
.globl start, _stext, _start, __stext
.globl trapbase
_start: /* danger danger */
#include "irq.h"
-volatile unsigned long cpu_callin_map[NR_CPUS] __initdata = {0,};
+volatile unsigned long cpu_callin_map[NR_CPUS] __cpuinitdata = {0,};
unsigned char boot_cpu_id = 0;
unsigned char boot_cpu_id4 = 0; /* boot_cpu_id << 2 */
panic("SMP bolixed\n");
}
-struct linux_prom_registers smp_penguin_ctable __initdata = { 0 };
+struct linux_prom_registers smp_penguin_ctable __cpuinitdata = { 0 };
void smp_send_reschedule(int cpu)
{
"i" (ASI_M_CTL));
}
-void __init smp4d_callin(void)
+void __cpuinit smp4d_callin(void)
{
int cpuid = hard_smp4d_processor_id();
extern spinlock_t sun4d_imsk_lock;
extern unsigned int lvl14_resolution;
-static void __init smp_setup_percpu_timer(void)
+static void __cpuinit smp_setup_percpu_timer(void)
{
int cpu = hard_smp4d_processor_id();
extern unsigned int lvl14_resolution;
-static void __init smp_setup_percpu_timer(void)
+static void __cpuinit smp_setup_percpu_timer(void)
{
int cpu = smp_processor_id();
.globl sun4m_cpu_startup, __smp4m_processor_id
.globl sun4d_cpu_startup, __smp4d_processor_id
- __INIT
+ __CPUINIT
.align 4
/* When we start up a cpu for the first time it enters this routine.
/* CPUID in bootbus can be found at PA 0xff0140000 */
#define SUN4D_BOOTBUS_CPUID 0xf0140000
- __INIT
+ __CPUINIT
.align 4
sun4d_cpu_startup:
.text 0xf0004000 :
{
_text = .;
+ *(.text.head)
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
/* Paging initialization on the Sparc Reference MMU. */
extern void sparc_context_init(int);
-void (*poke_srmmu)(void) __initdata = NULL;
+void (*poke_srmmu)(void) __cpuinitdata = NULL;
extern unsigned long bootmem_init(unsigned long *pages_avail);
(int)vac_cache_size, (int)vac_line_size);
}
-static void __init poke_hypersparc(void)
+static void __cpuinit poke_hypersparc(void)
{
volatile unsigned long clear;
unsigned long mreg = srmmu_get_mmureg();
hypersparc_setup_blockops();
}
-static void __init poke_cypress(void)
+static void __cpuinit poke_cypress(void)
{
unsigned long mreg = srmmu_get_mmureg();
unsigned long faddr, tagval;
init_cypress_common();
}
-static void __init poke_swift(void)
+static void __cpuinit poke_swift(void)
{
unsigned long mreg;
}
-static void __init poke_turbosparc(void)
+static void __cpuinit poke_turbosparc(void)
{
unsigned long mreg = srmmu_get_mmureg();
unsigned long ccreg;
poke_srmmu = poke_turbosparc;
}
-static void __init poke_tsunami(void)
+static void __cpuinit poke_tsunami(void)
{
unsigned long mreg = srmmu_get_mmureg();
tsunami_setup_blockops();
}
-static void __init poke_viking(void)
+static void __cpuinit poke_viking(void)
{
unsigned long mreg = srmmu_get_mmureg();
static int smp_catch;
return kern_base + (val - KERNBASE);
}
-static void ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
+static void __cpuinit ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
{
extern unsigned long sparc64_ttable_tl0;
extern unsigned long kern_locked_tte_data;
*/
static struct thread_info *cpu_new_thread = NULL;
-static int __devinit smp_boot_one_cpu(unsigned int cpu)
+static int __cpuinit smp_boot_one_cpu(unsigned int cpu)
{
struct trap_per_cpu *tb = &trap_block[cpu];
unsigned long entry =
return nid;
}
-static void add_node_ranges(void)
+static void __init add_node_ranges(void)
{
int i;
{
u8 pending;
asm volatile("int $0x16; setnz %0"
- : "=rm" (pending)
+ : "=qm" (pending)
: "a" (0x0100));
return pending;
}
#ifndef _ASM_X86_DS_H
#define _ASM_X86_DS_H
-#ifdef CONFIG_X86_DS
#include <linux/types.h>
#include <linux/init.h>
+#ifdef CONFIG_X86_DS
+
struct task_struct;
/*
#else /* CONFIG_X86_DS */
-#define ds_init_intel(config) do {} while (0)
+struct cpuinfo_x86;
+static inline void __cpuinit ds_init_intel(struct cpuinfo_x86 *ignored) {}
#endif /* CONFIG_X86_DS */
#endif /* _ASM_X86_DS_H */
*/
#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
-#if defined(CONFIG_GART_IOMMU) || defined(CONFIG_CALGARY_IOMMU)
-
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
(((PTR)->LEN_NAME) = (VAL))
-#else
-/* No IOMMU */
-
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME) (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME) (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-
-#endif
-
#endif /* __KERNEL__ */
#endif /* _ASM_X86_PCI_64_H */
extern int do_set_thread_area(struct task_struct *p, int idx,
struct user_desc __user *info, int can_allocate);
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#endif /* __KERNEL__ */
#endif /* !__ASSEMBLY__ */
obj-y += process.o
obj-y += i387.o xsave.o
obj-y += ptrace.o
-obj-y += ds.o
+obj-$(CONFIG_X86_DS) += ds.o
obj-$(CONFIG_X86_32) += tls.o
obj-$(CONFIG_IA32_EMULATION) += tls.o
obj-y += step.o
}
}
-void enable_IR_x2apic(void)
+void __init enable_IR_x2apic(void)
{
#ifdef CONFIG_INTR_REMAP
int ret;
u32 i = 0;
if (cpu_family == CPU_HW_PSTATE) {
- rdmsr(MSR_PSTATE_STATUS, lo, hi);
- i = lo & HW_PSTATE_MASK;
- data->currpstate = i;
+ if (data->currpstate == HW_PSTATE_INVALID) {
+ /* read (initial) hw pstate if not yet set */
+ rdmsr(MSR_PSTATE_STATUS, lo, hi);
+ i = lo & HW_PSTATE_MASK;
+
+ /*
+ * a workaround for family 11h erratum 311 might cause
+ * an "out-of-range Pstate if the core is in Pstate-0
+ */
+ if (i >= data->numps)
+ data->currpstate = HW_PSTATE_0;
+ else
+ data->currpstate = i;
+ }
return 0;
}
do {
}
data->cpu = pol->cpu;
+ data->currpstate = HW_PSTATE_INVALID;
if (powernow_k8_cpu_init_acpi(data)) {
/*
* http://www.gnu.org/licenses/gpl.html
*/
+
+enum pstate {
+ HW_PSTATE_INVALID = 0xff,
+ HW_PSTATE_0 = 0,
+ HW_PSTATE_1 = 1,
+ HW_PSTATE_2 = 2,
+ HW_PSTATE_3 = 3,
+ HW_PSTATE_4 = 4,
+ HW_PSTATE_5 = 5,
+ HW_PSTATE_6 = 6,
+ HW_PSTATE_7 = 7,
+};
+
struct powernow_k8_data {
unsigned int cpu;
u32 exttype; /* extended interface = 1 */
/* keep track of the current fid / vid or pstate */
- u32 currvid, currfid, currpstate;
+ u32 currvid;
+ u32 currfid;
+ enum pstate currpstate;
/* the powernow_table includes all frequency and vid/fid pairings:
* fid are the lower 8 bits of the index, vid are the upper 8 bits.
*/
-#ifdef CONFIG_X86_DS
-
#include <asm/ds.h>
#include <linux/errno.h>
static inline struct ds_context *ds_get_context(struct task_struct *task)
{
struct ds_context *context;
+ unsigned long irq;
- spin_lock(&ds_lock);
+ spin_lock_irqsave(&ds_lock, irq);
context = (task ? task->thread.ds_ctx : this_system_context);
if (context)
context->count++;
- spin_unlock(&ds_lock);
+ spin_unlock_irqrestore(&ds_lock, irq);
return context;
}
/*
* Same as ds_get_context, but allocates the context and it's DS
* structure, if necessary; returns NULL; if out of memory.
- *
- * pre: requires ds_lock to be held
*/
static inline struct ds_context *ds_alloc_context(struct task_struct *task)
{
struct ds_context **p_context =
(task ? &task->thread.ds_ctx : &this_system_context);
struct ds_context *context = *p_context;
+ unsigned long irq;
if (!context) {
- spin_unlock(&ds_lock);
-
context = kzalloc(sizeof(*context), GFP_KERNEL);
-
- if (!context) {
- spin_lock(&ds_lock);
+ if (!context)
return NULL;
- }
context->ds = kzalloc(ds_cfg.sizeof_ds, GFP_KERNEL);
if (!context->ds) {
kfree(context);
- spin_lock(&ds_lock);
return NULL;
}
- spin_lock(&ds_lock);
- /*
- * Check for race - another CPU could have allocated
- * it meanwhile:
- */
+ spin_lock_irqsave(&ds_lock, irq);
+
if (*p_context) {
kfree(context->ds);
kfree(context);
- return *p_context;
- }
- *p_context = context;
+ context = *p_context;
+ } else {
+ *p_context = context;
- context->this = p_context;
- context->task = task;
+ context->this = p_context;
+ context->task = task;
- if (task)
- set_tsk_thread_flag(task, TIF_DS_AREA_MSR);
+ if (task)
+ set_tsk_thread_flag(task, TIF_DS_AREA_MSR);
- if (!task || (task == current))
- wrmsr(MSR_IA32_DS_AREA, (unsigned long)context->ds, 0);
-
- get_tracer(task);
+ if (!task || (task == current))
+ wrmsrl(MSR_IA32_DS_AREA,
+ (unsigned long)context->ds);
+ }
+ spin_unlock_irqrestore(&ds_lock, irq);
}
context->count++;
*/
static inline void ds_put_context(struct ds_context *context)
{
+ unsigned long irq;
+
if (!context)
return;
- spin_lock(&ds_lock);
+ spin_lock_irqsave(&ds_lock, irq);
if (--context->count)
goto out;
kfree(context->ds);
kfree(context);
out:
- spin_unlock(&ds_lock);
+ spin_unlock_irqrestore(&ds_lock, irq);
}
struct ds_context *context;
unsigned long buffer, adj;
const unsigned long alignment = (1 << 3);
+ unsigned long irq;
int error = 0;
if (!ds_cfg.sizeof_ds)
return -EOPNOTSUPP;
- spin_lock(&ds_lock);
-
- error = -ENOMEM;
context = ds_alloc_context(task);
if (!context)
- goto out_unlock;
+ return -ENOMEM;
+
+ spin_lock_irqsave(&ds_lock, irq);
error = -EPERM;
if (!check_tracer(task))
goto out_unlock;
+ get_tracer(task);
+
error = -EALREADY;
if (context->owner[qual] == current)
- goto out_unlock;
+ goto out_put_tracer;
error = -EPERM;
if (context->owner[qual] != NULL)
- goto out_unlock;
+ goto out_put_tracer;
context->owner[qual] = current;
- spin_unlock(&ds_lock);
+ spin_unlock_irqrestore(&ds_lock, irq);
error = -ENOMEM;
out_release:
context->owner[qual] = NULL;
ds_put_context(context);
+ put_tracer(task);
+ return error;
+
+ out_put_tracer:
+ spin_unlock_irqrestore(&ds_lock, irq);
+ ds_put_context(context);
+ put_tracer(task);
return error;
out_unlock:
- spin_unlock(&ds_lock);
+ spin_unlock_irqrestore(&ds_lock, irq);
ds_put_context(context);
return error;
}
.sizeof_ds = sizeof(long) * 12,
.sizeof_field = sizeof(long),
.sizeof_rec[ds_bts] = sizeof(long) * 3,
+#ifdef __i386__
.sizeof_rec[ds_pebs] = sizeof(long) * 10
+#else
+ .sizeof_rec[ds_pebs] = sizeof(long) * 18
+#endif
};
static const struct ds_configuration ds_cfg_64 = {
.sizeof_ds = 8 * 12,
.sizeof_field = 8,
.sizeof_rec[ds_bts] = 8 * 3,
+#ifdef __i386__
.sizeof_rec[ds_pebs] = 8 * 10
+#else
+ .sizeof_rec[ds_pebs] = 8 * 18
+#endif
};
static inline void
while (leftovers--)
ds_put_context(context);
}
-#endif /* CONFIG_X86_DS */
stts();
}
-void __init init_thread_xstate(void)
+void __cpuinit init_thread_xstate(void)
{
if (!HAVE_HWFP) {
xstate_size = sizeof(struct i387_soft_struct);
int __init probe_nr_irqs(void)
{
- int idx;
- int nr = 0;
-#ifndef CONFIG_XEN
- int nr_min = 32;
-#else
- int nr_min = NR_IRQS;
-#endif
-
- for (idx = 0; idx < nr_ioapics; idx++)
- nr += io_apic_get_redir_entries(idx) + 1;
-
- /* double it for hotplug and msi and nmi */
- nr <<= 1;
-
- /* something wrong ? */
- if (nr < nr_min)
- nr = nr_min;
- if (WARN_ON(nr > NR_IRQS))
- nr = NR_IRQS;
-
- return nr;
+ return NR_IRQS;
}
/* --------------------------------------------------------------------------
void __init setup_ioapic_dest(void)
{
int pin, ioapic, irq, irq_entry;
+ struct irq_desc *desc;
struct irq_cfg *cfg;
+ cpumask_t mask;
if (skip_ioapic_setup == 1)
return;
* cpu is online.
*/
cfg = irq_cfg(irq);
- if (!cfg->vector)
+ if (!cfg->vector) {
setup_IO_APIC_irq(ioapic, pin, irq,
irq_trigger(irq_entry),
irq_polarity(irq_entry));
+ continue;
+
+ }
+
+ /*
+ * Honour affinities which have been set in early boot
+ */
+ desc = irq_to_desc(irq);
+ if (desc->status &
+ (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
+ mask = desc->affinity;
+ else
+ mask = TARGET_CPUS;
+
#ifdef CONFIG_INTR_REMAP
- else if (intr_remapping_enabled)
- set_ir_ioapic_affinity_irq(irq, TARGET_CPUS);
-#endif
+ if (intr_remapping_enabled)
+ set_ir_ioapic_affinity_irq(irq, mask);
else
- set_ioapic_affinity_irq(irq, TARGET_CPUS);
+#endif
+ set_ioapic_affinity_irq(irq, mask);
}
}
}
#ifdef CONFIG_X86_LOCAL_APIC
-static void __devinit kvm_setup_secondary_clock(void)
+static void __cpuinit kvm_setup_secondary_clock(void)
{
/*
* Now that the first cpu already had this clocksource initialized,
++p;
if (*p == '\0')
break;
- bridge = simple_strtol(p, &endp, 0);
+ bridge = simple_strtoul(p, &endp, 0);
if (p == endp)
break;
/*
* Enable and initialize the xsave feature.
*/
-void __init xsave_cntxt_init(void)
+void __ref xsave_cntxt_init(void)
{
unsigned int eax, ebx, ecx, edx;
int i;
if (!reset_value) {
- reset_value = kmalloc(sizeof(unsigned) * num_counters,
+ reset_value = kmalloc(sizeof(reset_value[0]) * num_counters,
GFP_ATOMIC);
if (!reset_value)
return;
pci_siemens_interrupt_controller);
/*
- * Regular PCI devices have 256 bytes, but AMD Family 10h Opteron ext config
- * have 4096 bytes. Even if the device is capable, that doesn't mean we can
- * access it. Maybe we don't have a way to generate extended config space
- * accesses. So check it
+ * Regular PCI devices have 256 bytes, but AMD Family 10h/11h CPUs have
+ * 4096 bytes configuration space for each function of their processor
+ * configuration space.
*/
-static void fam10h_pci_cfg_space_size(struct pci_dev *dev)
+static void amd_cpu_pci_cfg_space_size(struct pci_dev *dev)
{
dev->cfg_size = pci_cfg_space_size_ext(dev);
}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, fam10h_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1300, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1301, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1302, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1303, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1304, amd_cpu_pci_cfg_space_size);
/*
* SB600: Disable BAR1 on device 14.0 to avoid HPET resources from
* For 64-bit, we must skip the Xen hole in the middle of the address
* space, just after the big x86-64 virtual hole.
*/
-static int xen_pgd_walk(struct mm_struct *mm,
- int (*func)(struct mm_struct *mm, struct page *,
- enum pt_level),
- unsigned long limit)
+static int __xen_pgd_walk(struct mm_struct *mm, pgd_t *pgd,
+ int (*func)(struct mm_struct *mm, struct page *,
+ enum pt_level),
+ unsigned long limit)
{
- pgd_t *pgd = mm->pgd;
int flush = 0;
unsigned hole_low, hole_high;
unsigned pgdidx_limit, pudidx_limit, pmdidx_limit;
return flush;
}
+static int xen_pgd_walk(struct mm_struct *mm,
+ int (*func)(struct mm_struct *mm, struct page *,
+ enum pt_level),
+ unsigned long limit)
+{
+ return __xen_pgd_walk(mm, mm->pgd, func, limit);
+}
+
/* If we're using split pte locks, then take the page's lock and
return a pointer to it. Otherwise return NULL. */
static spinlock_t *xen_pte_lock(struct page *page, struct mm_struct *mm)
xen_mc_batch();
- if (xen_pgd_walk(mm, xen_pin_page, USER_LIMIT)) {
+ if (__xen_pgd_walk(mm, pgd, xen_pin_page, USER_LIMIT)) {
/* re-enable interrupts for flushing */
xen_mc_issue(0);
PT_PMD);
#endif
- xen_pgd_walk(mm, xen_unpin_page, USER_LIMIT);
+ __xen_pgd_walk(mm, pgd, xen_unpin_page, USER_LIMIT);
xen_mc_issue(0);
}
alternatives_smp_switch(0);
}
-static void xen_play_dead(void)
+static void __cpuinit xen_play_dead(void) /* used only with CPU_HOTPLUG */
{
play_dead_common();
HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
void xen_mark_init_mm_pinned(void);
-void __init xen_setup_vcpu_info_placement(void);
+void xen_setup_vcpu_info_placement(void);
#ifdef CONFIG_SMP
void xen_smp_init(void);
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
val->intval = battery->current_now * 1000;
+ /* if power units are mW, convert to mA by
+ dividing by current voltage (mV/1000) */
+ if (!battery->power_unit) {
+ if (battery->voltage_now) {
+ val->intval /= battery->voltage_now;
+ val->intval *= 1000;
+ } else
+ val->intval = -1;
+ }
break;
case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
acpi_dmi_osi_linux(1, d); /* enable */
return 0;
}
-static int __init dmi_disable_osi_linux(const struct dmi_system_id *d)
-{
- acpi_dmi_osi_linux(0, d); /* disable */
- return 0;
-}
-static int __init dmi_unknown_osi_linux(const struct dmi_system_id *d)
-{
- acpi_dmi_osi_linux(-1, d); /* unknown */
- return 0;
-}
static int __init dmi_disable_osi_vista(const struct dmi_system_id *d)
{
printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
return 0;
}
-/*
- * Most BIOS that invoke OSI(Linux) do nothing with it.
- * But some cause Linux to break.
- * Only a couple use it to make Linux run better.
- *
- * Thus, Linux should continue to disable OSI(Linux) by default,
- * should continue to discourage BIOS writers from using it, and
- * should whitelist the few existing systems that require it.
- *
- * If it appears clear a vendor isn't using OSI(Linux)
- * for anything constructive, blacklist them by name to disable
- * unnecessary dmesg warnings on all of their products.
- */
-
static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
- /*
- * Disable OSI(Linux) warnings on all "Acer, inc."
- *
- * _OSI(Linux) disables the latest Windows BIOS code:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5050"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5580"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 3010"),
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Ferrari 5000"),
- */
- /*
- * note that dmi_check_system() uses strstr()
- * to match sub-strings rather than !strcmp(),
- * so "Acer" below matches "Acer, inc." above.
- */
- /*
- * Disable OSI(Linux) warnings on all "Acer"
- *
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720Z"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5520"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 6460"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 7510"),
- *
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5220"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Acer",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Apple Computer, Inc."
- * Disable OSI(Linux) warnings on all "Apple Inc."
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook2,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,1"),
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacPro2,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,1"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Apple",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "BenQ"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Joybook S31"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "BenQ",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "BenQ"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Clevo Co."
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "M570RU"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Clevo",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "COMPAL"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_BOARD_NAME, "HEL8X"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_BOARD_NAME, "IFL91"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Compal",
- .matches = {
- DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
- },
- },
- { /* OSI(Linux) touches USB, unknown side-effect */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell Dimension 5150",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM051"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell i1501",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1501"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell Latitude D830",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D830"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell OptiPlex GX620",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX620"),
- },
- },
- { /* OSI(Linux) causes some USB initialization to not run */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell OptiPlex 755",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 755"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE 1900",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1900"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE 1950",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell PE R200",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R200"),
- },
- },
- { /* OSI(Linux) touches USB */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell PR 390",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 390"),
- },
- },
- { /* OSI(Linux) touches USB */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PR 390",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 690"),
- },
- },
- { /* OSI(Linux) unknown - ASL looks benign, but may effect dock/SMM */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PR M4300",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision M4300"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell Vostro 1000",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1000"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE SC440",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge SC440"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dialogue Flybook V5",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dialogue Technology Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Flybook V5"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "FUJITSU SIEMENS"
- *
- * _OSI(Linux) disables latest Windows BIOS code:
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 2510"),
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1536"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1556"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 1546"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo M1425"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo Si 1520"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Fujitsu Siemens",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
- },
- },
{
.callback = dmi_disable_osi_vista,
.ident = "Fujitsu Siemens",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
},
},
+
/*
- * Disable OSI(Linux) warnings on all "Hewlett-Packard"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * .ident = "HP Pavilion tx 1000"
- * DMI_MATCH(DMI_BOARD_NAME, "30BF"),
- * .ident = "HP Pavilion dv2000"
- * DMI_MATCH(DMI_BOARD_NAME, "30B5"),
- * .ident = "HP Pavilion dv5000",
- * DMI_MATCH(DMI_BOARD_NAME, "30A7"),
- * .ident = "HP Pavilion dv6300 30BC",
- * DMI_MATCH(DMI_BOARD_NAME, "30BC"),
- * .ident = "HP Pavilion dv6000",
- * DMI_MATCH(DMI_BOARD_NAME, "30B7"),
- * DMI_MATCH(DMI_BOARD_NAME, "30B8"),
- * .ident = "HP Pavilion dv9000",
- * DMI_MATCH(DMI_BOARD_NAME, "30B9"),
- * .ident = "HP Pavilion dv9500",
- * DMI_MATCH(DMI_BOARD_NAME, "30CB"),
- * .ident = "HP/Compaq Presario C500",
- * DMI_MATCH(DMI_BOARD_NAME, "30C6"),
- * .ident = "HP/Compaq Presario F500",
- * DMI_MATCH(DMI_BOARD_NAME, "30D3"),
- * _OSI(Linux) unknown effect:
- * .ident = "HP Pavilion dv6500",
- * DMI_MATCH(DMI_BOARD_NAME, "30D0"),
+ * BIOS invocation of _OSI(Linux) is almost always a BIOS bug.
+ * Linux ignores it, except for the machines enumerated below.
*/
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Hewlett-Packard",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- },
- },
+
/*
* Lenovo has a mix of systems OSI(Linux) situations
* and thus we can not wildcard the vendor.
DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"),
},
},
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Lenovo 3000 V100",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "LENOVO3000 V100"),
- },
- },
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Lenovo 3000 N100",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "LG Electronics"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "P1-J150B"),
- * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
- *
- * unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "S1-MDGDG"),
- * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "LG",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
- },
- },
- /* NEC - OSI(Linux) effect unknown */
- {
- .callback = dmi_unknown_osi_linux,
- .ident = "NEC VERSA M360",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "NEC Computers SAS"),
- DMI_MATCH(DMI_PRODUCT_NAME, "NEC VERSA M360"),
- },
- },
- /* Panasonic */
- {
- .callback = dmi_unknown_osi_linux,
- .ident = "Panasonic",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
- /* Toughbook CF-52 */
- DMI_MATCH(DMI_PRODUCT_NAME, "CF-52CCABVBG"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Samsung Electronics"
- *
- * OSI(Linux) disables PNP0C32 and other BIOS code for Windows:
- * DMI_MATCH(DMI_PRODUCT_NAME, "R40P/R41P"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "R59P/R60P/R61P"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Samsung",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Sony Corporation"
- *
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NR11S_S"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ38GP_C"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ650N"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-TZ21MN_N"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ11M"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Sony",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "TOSHIBA"
- *
- * _OSI(Linux) breaks sound (bugzilla 7787):
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P105"),
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A210"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A135"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A200"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P205"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U305"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Toshiba",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- },
- },
{}
};
goto unlock;
err:
/* false interrupt, state didn't change */
- ++ec->curr->irq_count;
+ if (in_interrupt())
+ ++ec->curr->irq_count;
unlock:
spin_unlock_irqrestore(&ec->curr_lock, flags);
}
#include <linux/interrupt.h>
#include <linux/kmod.h>
#include <linux/delay.h>
-#include <linux/dmi.h>
#include <linux/workqueue.h>
#include <linux/nmi.h>
#include <linux/acpi.h>
static char osi_additional_string[OSI_STRING_LENGTH_MAX];
/*
- * "Ode to _OSI(Linux)"
+ * The story of _OSI(Linux)
*
- * osi_linux -- Control response to BIOS _OSI(Linux) query.
+ * From pre-history through Linux-2.6.22,
+ * Linux responded TRUE upon a BIOS OSI(Linux) query.
*
- * As Linux evolves, the features that it supports change.
- * So an OSI string such as "Linux" is not specific enough
- * to be useful across multiple versions of Linux. It
- * doesn't identify any particular feature, interface,
- * or even any particular version of Linux...
+ * Unfortunately, reference BIOS writers got wind of this
+ * and put OSI(Linux) in their example code, quickly exposing
+ * this string as ill-conceived and opening the door to
+ * an un-bounded number of BIOS incompatibilities.
*
- * Unfortunately, Linux-2.6.22 and earlier responded "yes"
- * to a BIOS _OSI(Linux) query. When
- * a reference mobile BIOS started using it, its use
- * started to spread to many vendor platforms.
- * As it is not supportable, we need to halt that spread.
+ * For example, OSI(Linux) was used on resume to re-POST a
+ * video card on one system, because Linux at that time
+ * could not do a speedy restore in its native driver.
+ * But then upon gaining quick native restore capability,
+ * Linux has no way to tell the BIOS to skip the time-consuming
+ * POST -- putting Linux at a permanent performance disadvantage.
+ * On another system, the BIOS writer used OSI(Linux)
+ * to infer native OS support for IPMI! On other systems,
+ * OSI(Linux) simply got in the way of Linux claiming to
+ * be compatible with other operating systems, exposing
+ * BIOS issues such as skipped device initialization.
*
- * Today, most BIOS references to _OSI(Linux) are noise --
- * they have no functional effect and are just dead code
- * carried over from the reference BIOS.
- *
- * The next most common case is that _OSI(Linux) harms Linux,
- * usually by causing the BIOS to follow paths that are
- * not tested during Windows validation.
- *
- * Finally, there is a short list of platforms
- * where OSI(Linux) benefits Linux.
- *
- * In Linux-2.6.23, OSI(Linux) is first disabled by default.
- * DMI is used to disable the dmesg warning about OSI(Linux)
- * on platforms where it is known to have no effect.
- * But a dmesg warning remains for systems where
- * we do not know if OSI(Linux) is good or bad for the system.
- * DMI is also used to enable OSI(Linux) for the machines
- * that are known to need it.
+ * So "Linux" turned out to be a really poor chose of
+ * OSI string, and from Linux-2.6.23 onward we respond FALSE.
*
* BIOS writers should NOT query _OSI(Linux) on future systems.
- * It will be ignored by default, and to get Linux to
- * not ignore it will require a kernel source update to
- * add a DMI entry, or a boot-time "acpi_osi=Linux" invocation.
+ * Linux will complain on the console when it sees it, and return FALSE.
+ * To get Linux to return TRUE for your system will require
+ * a kernel source update to add a DMI entry,
+ * or boot with "acpi_osi=Linux"
*/
-#define OSI_LINUX_ENABLE 0
static struct osi_linux {
unsigned int enable:1;
unsigned int dmi:1;
unsigned int cmdline:1;
unsigned int known:1;
-} osi_linux = { OSI_LINUX_ENABLE, 0, 0, 0};
+} osi_linux = { 0, 0, 0, 0};
static void __init acpi_request_region (struct acpi_generic_address *addr,
unsigned int length, char *desc)
return (AE_OK);
}
-/**
- * acpi_dmi_dump - dump DMI slots needed for blacklist entry
- *
- * Returns 0 on success
- */
-static int acpi_dmi_dump(void)
-{
-
- if (!dmi_available)
- return -1;
-
- printk(KERN_NOTICE PREFIX "DMI System Vendor: %s\n",
- dmi_get_system_info(DMI_SYS_VENDOR));
- printk(KERN_NOTICE PREFIX "DMI Product Name: %s\n",
- dmi_get_system_info(DMI_PRODUCT_NAME));
- printk(KERN_NOTICE PREFIX "DMI Product Version: %s\n",
- dmi_get_system_info(DMI_PRODUCT_VERSION));
- printk(KERN_NOTICE PREFIX "DMI Board Name: %s\n",
- dmi_get_system_info(DMI_BOARD_NAME));
- printk(KERN_NOTICE PREFIX "DMI BIOS Vendor: %s\n",
- dmi_get_system_info(DMI_BIOS_VENDOR));
- printk(KERN_NOTICE PREFIX "DMI BIOS Date: %s\n",
- dmi_get_system_info(DMI_BIOS_DATE));
-
- return 0;
-}
-
-
/******************************************************************************
*
* FUNCTION: acpi_os_validate_interface
osi_linux.cmdline ? " via cmdline" :
osi_linux.dmi ? " via DMI" : "");
- if (!osi_linux.dmi) {
- if (acpi_dmi_dump())
- printk(KERN_NOTICE PREFIX
- "[please extract dmidecode output]\n");
- printk(KERN_NOTICE PREFIX
- "Please send DMI info above to "
- "linux-acpi@vger.kernel.org\n");
- }
- if (!osi_linux.known && !osi_linux.cmdline) {
- printk(KERN_NOTICE PREFIX
- "If \"acpi_osi=%sLinux\" works better, "
- "please notify linux-acpi@vger.kernel.org\n",
- osi_linux.enable ? "!" : "");
- }
-
if (osi_linux.enable)
return AE_OK;
}
if (!acpi_match_device_ids(device, button_device_ids))
device->wakeup.flags.run_wake = 1;
- /*
- * Don't set Power button GPE as run_wake
- * if Fixed Power button is used
- */
- if (!strcmp(device->pnp.hardware_id, "PNP0C0C") &&
- !(acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON)) {
- device->wakeup.flags.run_wake = 0;
- device->wakeup.flags.valid = 0;
- }
-
end:
if (ACPI_FAILURE(status))
device->flags.wake_capable = 0;
old_suspend_ordering = true;
}
+/*
+ * According to the ACPI specification the BIOS should make sure that ACPI is
+ * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still,
+ * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
+ * on such systems during resume. Unfortunately that doesn't help in
+ * particularly pathological cases in which SCI_EN has to be set directly on
+ * resume, although the specification states very clearly that this flag is
+ * owned by the hardware. The set_sci_en_on_resume variable will be set in such
+ * cases.
+ */
+static bool set_sci_en_on_resume;
+
/**
* acpi_pm_disable_gpes - Disable the GPEs.
*/
}
/* If ACPI is not enabled by the BIOS, we need to enable it here. */
- acpi_enable();
+ if (set_sci_en_on_resume)
+ acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1);
+ else
+ acpi_enable();
+
/* Reprogram control registers and execute _BFS */
acpi_leave_sleep_state_prep(acpi_state);
return 0;
}
+static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d)
+{
+ set_sci_en_on_resume = true;
+ return 0;
+}
+
static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
{
.callback = init_old_suspend_ordering,
DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
},
},
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Apple MacBook 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Apple MacMini 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+ },
+ },
{},
};
#endif /* CONFIG_SUSPEND */
ret = input_register_polled_device(toshiba_acpi.poll_dev);
if (ret) {
printk(MY_ERR "unable to register kill-switch input device\n");
- rfkill_free(toshiba_acpi.rfk_dev);
- toshiba_acpi.rfk_dev = NULL;
toshiba_acpi_exit();
return ret;
}
struct acpi_object_list *arguments, unsigned long long *data)
{
acpi_status status = AE_OK;
- union acpi_object *element;
+ union acpi_object element;
struct acpi_buffer buffer = { 0, NULL };
-
if (!data)
return AE_BAD_PARAMETER;
- element = kzalloc(sizeof(union acpi_object), irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL);
- if (!element)
- return AE_NO_MEMORY;
-
buffer.length = sizeof(union acpi_object);
- buffer.pointer = element;
+ buffer.pointer = &element;
status = acpi_evaluate_object(handle, pathname, arguments, &buffer);
if (ACPI_FAILURE(status)) {
acpi_util_eval_error(handle, pathname, status);
- kfree(element);
return status;
}
- if (element->type != ACPI_TYPE_INTEGER) {
+ if (element.type != ACPI_TYPE_INTEGER) {
acpi_util_eval_error(handle, pathname, AE_BAD_DATA);
- kfree(element);
return AE_BAD_DATA;
}
- *data = element->integer.value;
- kfree(element);
+ *data = element.integer.value;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Return value [%llu]\n", *data));
int in_irq;
/* Details of hardware device */
- unsigned long physaddr;
+ resource_size_t physaddr;
void __iomem *baseaddr;
int irq;
int bus_width; /* 0 := 8 bit; 1 := 16 bit */
/* Okay, it's a data request, set it up for transfer */
dev_dbg(ace->dev,
- "request: sec=%lx hcnt=%lx, ccnt=%x, dir=%i\n",
- req->sector, req->hard_nr_sectors,
+ "request: sec=%llx hcnt=%lx, ccnt=%x, dir=%i\n",
+ (unsigned long long) req->sector, req->hard_nr_sectors,
req->current_nr_sectors, rq_data_dir(req));
ace->req = req;
int rc;
dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace);
- dev_dbg(ace->dev, "physaddr=0x%lx irq=%i\n", ace->physaddr, ace->irq);
+ dev_dbg(ace->dev, "physaddr=0x%llx irq=%i\n",
+ (unsigned long long)ace->physaddr, ace->irq);
spin_lock_init(&ace->lock);
init_completion(&ace->id_completion);
/* Print the identification */
dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n",
(version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff);
- dev_dbg(ace->dev, "physaddr 0x%lx, mapped to 0x%p, irq=%i\n",
- ace->physaddr, ace->baseaddr, ace->irq);
+ dev_dbg(ace->dev, "physaddr 0x%llx, mapped to 0x%p, irq=%i\n",
+ (unsigned long long) ace->physaddr, ace->baseaddr, ace->irq);
ace->media_change = 1;
ace_revalidate_disk(ace->gd);
err_blk_initq:
iounmap(ace->baseaddr);
err_ioremap:
- dev_info(ace->dev, "xsysace: error initializing device at 0x%lx\n",
- ace->physaddr);
+ dev_info(ace->dev, "xsysace: error initializing device at 0x%llx\n",
+ (unsigned long long) ace->physaddr);
return -ENOMEM;
}
}
static int __devinit
-ace_alloc(struct device *dev, int id, unsigned long physaddr,
+ace_alloc(struct device *dev, int id, resource_size_t physaddr,
int irq, int bus_width)
{
struct ace_device *ace;
static int __devinit ace_probe(struct platform_device *dev)
{
- unsigned long physaddr = 0;
+ resource_size_t physaddr = 0;
int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */
int id = dev->id;
int irq = NO_IRQ;
ace_of_probe(struct of_device *op, const struct of_device_id *match)
{
struct resource res;
- unsigned long physaddr;
+ resource_size_t physaddr;
const u32 *id;
int irq, bus_width, rc;
static int uninorth_rev;
static int is_u3;
-static char __devinitdata *aperture = NULL;
+static char *aperture = NULL;
static int uninorth_fetch_size(void)
{
* do is go probing around in the usual places hoping we can find it.
*/
-static int stli_findeisabrds(void)
+static int __init stli_findeisabrds(void)
{
struct stlibrd *brdp;
unsigned int iobase, eid, i;
* can find.
*/
-static int stli_initbrds(void)
+static int __init stli_initbrds(void)
{
struct stlibrd *brdp, *nxtbrdp;
struct stlconf conf;
}
#endif
if (device == MKDEV(TTYAUX_MAJOR, 1)) {
- driver = tty_driver_kref_get(console_device(&index));
- if (driver) {
- /* Don't let /dev/console block */
- filp->f_flags |= O_NONBLOCK;
- noctty = 1;
- goto got_driver;
+ struct tty_driver *console_driver = console_device(&index);
+ if (console_driver) {
+ driver = tty_driver_kref_get(console_driver);
+ if (driver) {
+ /* Don't let /dev/console block */
+ filp->f_flags |= O_NONBLOCK;
+ noctty = 1;
+ goto got_driver;
+ }
}
mutex_unlock(&tty_mutex);
return -ENODEV;
if (!request_mem_region(drvdata->mem_start,
drvdata->mem_size, DRIVER_NAME)) {
dev_err(dev, "Couldn't lock memory region at %Lx\n",
- regs_res->start);
+ (unsigned long long) regs_res->start);
retval = -EBUSY;
goto failed1;
}
mutex_init(&drvdata->sem);
drvdata->is_open = 0;
- dev_info(dev, "ioremap %lx to %p with size %Lx\n",
- (unsigned long int)drvdata->mem_start,
- drvdata->base_address, drvdata->mem_size);
+ dev_info(dev, "ioremap %llx to %p with size %llx\n",
+ (unsigned long long) drvdata->mem_start,
+ drvdata->base_address,
+ (unsigned long long) drvdata->mem_size);
cdev_init(&drvdata->cdev, &hwicap_fops);
drvdata->cdev.owner = THIS_MODULE;
return ret;
}
-static int __devexit talitos_remove(struct of_device *ofdev)
+static int talitos_remove(struct of_device *ofdev)
{
struct device *dev = &ofdev->dev;
struct talitos_private *priv = dev_get_drvdata(dev);
.name = "talitos",
.match_table = talitos_match,
.probe = talitos_probe,
- .remove = __devexit_p(talitos_remove),
+ .remove = talitos_remove,
};
static int __init talitos_init(void)
return;
}
+ drm_vblank_cleanup(dev);
+
drm_lastclose(dev);
if (drm_core_has_MTRR(dev) && drm_core_has_AGP(dev) &&
}
}
-static void drm_vblank_cleanup(struct drm_device *dev)
+void drm_vblank_cleanup(struct drm_device *dev)
{
/* Bail if the driver didn't call drm_vblank_init() */
if (dev->num_crtcs == 0)
free_irq(dev->pdev->irq, dev);
- drm_vblank_cleanup(dev);
-
return 0;
}
EXPORT_SYMBOL(drm_irq_uninstall);
spin_lock_init(&dev_priv->user_irq_lock);
+ ret = drm_vblank_init(dev, I915_NUM_PIPE);
+
+ if (ret) {
+ (void) i915_driver_unload(dev);
+ return ret;
+ }
+
return ret;
}
PIPE_B,
};
+#define I915_NUM_PIPE 2
+
/* Interface history:
*
* 1.1: Original.
int user_irq_refcount;
/** Cached value of IMR to avoid reads in updating the bitfield */
u32 irq_mask_reg;
+ u32 pipestat[2];
int tex_lru_log_granularity;
int allow_batchbuffer;
u32 saveDSPBCNTR;
u32 saveDSPARB;
u32 saveRENDERSTANDBY;
+ u32 saveHWS;
u32 savePIPEACONF;
u32 savePIPEBCONF;
u32 savePIPEASRC;
struct drm_file *file_priv);
extern void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask);
+void
+i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
+
+void
+i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
+
+
/* i915_mem.c */
extern int i915_mem_alloc(struct drm_device *dev, void *data,
struct drm_file *file_priv);
#include "i915_drv.h"
#include <linux/swap.h>
+#define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+
static int
i915_gem_object_set_domain(struct drm_gem_object *obj,
uint32_t read_domains,
i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
- drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_get_aperture *args = data;
- struct drm_i915_gem_object *obj_priv;
if (!(dev->driver->driver_features & DRIVER_GEM))
return -ENODEV;
args->aper_size = dev->gtt_total;
- args->aper_available_size = args->aper_size;
-
- list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
- if (obj_priv->pin_count > 0)
- args->aper_available_size -= obj_priv->obj->size;
- }
+ args->aper_available_size = (args->aper_size -
+ atomic_read(&dev->pin_memory));
return 0;
}
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
-
- if (obj_priv->gtt_space == NULL) {
- /* We evicted the buffer in the process of validating
- * our set of buffers in. We could try to recover by
- * kicking them everything out and trying again from
- * the start.
- */
- ret = -ENOMEM;
- goto err;
- }
/* make sure all previous memory operations have passed */
ret = i915_gem_object_set_domain(obj,
i915_gem_retire_requests(dev);
- /* Active and flushing should now be empty as we've
- * waited for a sequence higher than any pending execbuffer
- */
- BUG_ON(!list_empty(&dev_priv->mm.active_list));
- BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
+ if (!dev_priv->mm.wedged) {
+ /* Active and flushing should now be empty as we've
+ * waited for a sequence higher than any pending execbuffer
+ */
+ WARN_ON(!list_empty(&dev_priv->mm.active_list));
+ WARN_ON(!list_empty(&dev_priv->mm.flushing_list));
+ /* Request should now be empty as we've also waited
+ * for the last request in the list
+ */
+ WARN_ON(!list_empty(&dev_priv->mm.request_list));
+ }
- /* Request should now be empty as we've also waited
- * for the last request in the list
+ /* Empty the active and flushing lists to inactive. If there's
+ * anything left at this point, it means that we're wedged and
+ * nothing good's going to happen by leaving them there. So strip
+ * the GPU domains and just stuff them onto inactive.
*/
- BUG_ON(!list_empty(&dev_priv->mm.request_list));
+ while (!list_empty(&dev_priv->mm.active_list)) {
+ struct drm_i915_gem_object *obj_priv;
+
+ obj_priv = list_first_entry(&dev_priv->mm.active_list,
+ struct drm_i915_gem_object,
+ list);
+ obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
+ i915_gem_object_move_to_inactive(obj_priv->obj);
+ }
+
+ while (!list_empty(&dev_priv->mm.flushing_list)) {
+ struct drm_i915_gem_object *obj_priv;
+
+ obj_priv = list_first_entry(&dev_priv->mm.flushing_list,
+ struct drm_i915_gem_object,
+ list);
+ obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
+ i915_gem_object_move_to_inactive(obj_priv->obj);
+ }
- /* Move all buffers out of the GTT. */
+
+ /* Move all inactive buffers out of the GTT. */
ret = i915_gem_evict_from_list(dev, &dev_priv->mm.inactive_list);
+ WARN_ON(!list_empty(&dev_priv->mm.inactive_list));
if (ret) {
mutex_unlock(&dev->struct_mutex);
return ret;
}
- BUG_ON(!list_empty(&dev_priv->mm.active_list));
- BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
- BUG_ON(!list_empty(&dev_priv->mm.inactive_list));
- BUG_ON(!list_empty(&dev_priv->mm.request_list));
-
i915_gem_cleanup_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
#define MAX_NOPID ((u32)~0)
-/** These are the interrupts used by the driver */
-#define I915_INTERRUPT_ENABLE_MASK (I915_USER_INTERRUPT | \
- I915_ASLE_INTERRUPT | \
- I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
- I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+/**
+ * Interrupts that are always left unmasked.
+ *
+ * Since pipe events are edge-triggered from the PIPESTAT register to IIR,
+ * we leave them always unmasked in IMR and then control enabling them through
+ * PIPESTAT alone.
+ */
+#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \
+ I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
+ I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+
+/** Interrupts that we mask and unmask at runtime. */
+#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT)
+
+/** These are all of the interrupts used by the driver */
+#define I915_INTERRUPT_ENABLE_MASK (I915_INTERRUPT_ENABLE_FIX | \
+ I915_INTERRUPT_ENABLE_VAR)
void
i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
}
}
+static inline u32
+i915_pipestat(int pipe)
+{
+ if (pipe == 0)
+ return PIPEASTAT;
+ if (pipe == 1)
+ return PIPEBSTAT;
+ BUG_ON(1);
+}
+
+void
+i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
+{
+ if ((dev_priv->pipestat[pipe] & mask) != mask) {
+ u32 reg = i915_pipestat(pipe);
+
+ dev_priv->pipestat[pipe] |= mask;
+ /* Enable the interrupt, clear any pending status */
+ I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16));
+ (void) I915_READ(reg);
+ }
+}
+
+void
+i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
+{
+ if ((dev_priv->pipestat[pipe] & mask) != 0) {
+ u32 reg = i915_pipestat(pipe);
+
+ dev_priv->pipestat[pipe] &= ~mask;
+ I915_WRITE(reg, dev_priv->pipestat[pipe]);
+ (void) I915_READ(reg);
+ }
+}
+
/**
* i915_pipe_enabled - check if a pipe is enabled
* @dev: DRM device
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 iir;
+ u32 iir, new_iir;
u32 pipea_stats, pipeb_stats;
+ u32 vblank_status;
+ u32 vblank_enable;
int vblank = 0;
+ unsigned long irqflags;
+ int irq_received;
+ int ret = IRQ_NONE;
atomic_inc(&dev_priv->irq_received);
- if (dev->pdev->msi_enabled)
- I915_WRITE(IMR, ~0);
iir = I915_READ(IIR);
- if (iir == 0) {
- if (dev->pdev->msi_enabled) {
- I915_WRITE(IMR, dev_priv->irq_mask_reg);
- (void) I915_READ(IMR);
- }
- return IRQ_NONE;
+ if (IS_I965G(dev)) {
+ vblank_status = I915_START_VBLANK_INTERRUPT_STATUS;
+ vblank_enable = PIPE_START_VBLANK_INTERRUPT_ENABLE;
+ } else {
+ vblank_status = I915_VBLANK_INTERRUPT_STATUS;
+ vblank_enable = I915_VBLANK_INTERRUPT_ENABLE;
}
- /*
- * Clear the PIPE(A|B)STAT regs before the IIR otherwise
- * we may get extra interrupts.
- */
- if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) {
+ for (;;) {
+ irq_received = iir != 0;
+
+ /* Can't rely on pipestat interrupt bit in iir as it might
+ * have been cleared after the pipestat interrupt was received.
+ * It doesn't set the bit in iir again, but it still produces
+ * interrupts (for non-MSI).
+ */
+ spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
pipea_stats = I915_READ(PIPEASTAT);
- if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_A))
- pipea_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
- PIPE_VBLANK_INTERRUPT_ENABLE);
- else if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
- PIPE_VBLANK_INTERRUPT_STATUS)) {
+ pipeb_stats = I915_READ(PIPEBSTAT);
+ /*
+ * Clear the PIPE(A|B)STAT regs before the IIR
+ */
+ if (pipea_stats & 0x8000ffff) {
+ I915_WRITE(PIPEASTAT, pipea_stats);
+ irq_received = 1;
+ }
+
+ if (pipeb_stats & 0x8000ffff) {
+ I915_WRITE(PIPEBSTAT, pipeb_stats);
+ irq_received = 1;
+ }
+ spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
+
+ if (!irq_received)
+ break;
+
+ ret = IRQ_HANDLED;
+
+ I915_WRITE(IIR, iir);
+ new_iir = I915_READ(IIR); /* Flush posted writes */
+
+ if (dev_priv->sarea_priv)
+ dev_priv->sarea_priv->last_dispatch =
+ READ_BREADCRUMB(dev_priv);
+
+ if (iir & I915_USER_INTERRUPT) {
+ dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
+ DRM_WAKEUP(&dev_priv->irq_queue);
+ }
+
+ if (pipea_stats & vblank_status) {
vblank++;
drm_handle_vblank(dev, 0);
}
- I915_WRITE(PIPEASTAT, pipea_stats);
- }
- if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) {
- pipeb_stats = I915_READ(PIPEBSTAT);
- /* Ack the event */
- I915_WRITE(PIPEBSTAT, pipeb_stats);
-
- /* The vblank interrupt gets enabled even if we didn't ask for
- it, so make sure it's shut down again */
- if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_B))
- pipeb_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
- PIPE_VBLANK_INTERRUPT_ENABLE);
- else if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
- PIPE_VBLANK_INTERRUPT_STATUS)) {
+ if (pipeb_stats & vblank_status) {
vblank++;
drm_handle_vblank(dev, 1);
}
- if (pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS)
+ if ((pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) ||
+ (iir & I915_ASLE_INTERRUPT))
opregion_asle_intr(dev);
- I915_WRITE(PIPEBSTAT, pipeb_stats);
- }
-
- I915_WRITE(IIR, iir);
- if (dev->pdev->msi_enabled)
- I915_WRITE(IMR, dev_priv->irq_mask_reg);
- (void) I915_READ(IIR); /* Flush posted writes */
-
- if (dev_priv->sarea_priv)
- dev_priv->sarea_priv->last_dispatch =
- READ_BREADCRUMB(dev_priv);
- if (iir & I915_USER_INTERRUPT) {
- dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
- DRM_WAKEUP(&dev_priv->irq_queue);
+ /* With MSI, interrupts are only generated when iir
+ * transitions from zero to nonzero. If another bit got
+ * set while we were handling the existing iir bits, then
+ * we would never get another interrupt.
+ *
+ * This is fine on non-MSI as well, as if we hit this path
+ * we avoid exiting the interrupt handler only to generate
+ * another one.
+ *
+ * Note that for MSI this could cause a stray interrupt report
+ * if an interrupt landed in the time between writing IIR and
+ * the posting read. This should be rare enough to never
+ * trigger the 99% of 100,000 interrupts test for disabling
+ * stray interrupts.
+ */
+ iir = new_iir;
}
- if (iir & I915_ASLE_INTERRUPT)
- opregion_asle_intr(dev);
-
- return IRQ_HANDLED;
+ return ret;
}
static int i915_emit_irq(struct drm_device * dev)
int i915_enable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 pipestat_reg = 0;
- u32 pipestat;
- u32 interrupt = 0;
unsigned long irqflags;
- switch (pipe) {
- case 0:
- pipestat_reg = PIPEASTAT;
- interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
- break;
- case 1:
- pipestat_reg = PIPEBSTAT;
- interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
- break;
- default:
- DRM_ERROR("tried to enable vblank on non-existent pipe %d\n",
- pipe);
- return 0;
- }
-
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
- /* Enabling vblank events in IMR comes before PIPESTAT write, or
- * there's a race where the PIPESTAT vblank bit gets set to 1, so
- * the OR of enabled PIPESTAT bits goes to 1, so the PIPExEVENT in
- * ISR flashes to 1, but the IIR bit doesn't get set to 1 because
- * IMR masks it. It doesn't ever get set after we clear the masking
- * in IMR because the ISR bit is edge, not level-triggered, on the
- * OR of PIPESTAT bits.
- */
- i915_enable_irq(dev_priv, interrupt);
- pipestat = I915_READ(pipestat_reg);
if (IS_I965G(dev))
- pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE;
+ i915_enable_pipestat(dev_priv, pipe,
+ PIPE_START_VBLANK_INTERRUPT_ENABLE);
else
- pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE;
- /* Clear any stale interrupt status */
- pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
- PIPE_VBLANK_INTERRUPT_STATUS);
- I915_WRITE(pipestat_reg, pipestat);
- (void) I915_READ(pipestat_reg); /* Posting read */
+ i915_enable_pipestat(dev_priv, pipe,
+ PIPE_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
-
return 0;
}
void i915_disable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 pipestat_reg = 0;
- u32 pipestat;
- u32 interrupt = 0;
unsigned long irqflags;
- switch (pipe) {
- case 0:
- pipestat_reg = PIPEASTAT;
- interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
- break;
- case 1:
- pipestat_reg = PIPEBSTAT;
- interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
- break;
- default:
- DRM_ERROR("tried to disable vblank on non-existent pipe %d\n",
- pipe);
- return;
- break;
- }
-
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
- i915_disable_irq(dev_priv, interrupt);
- pipestat = I915_READ(pipestat_reg);
- pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
- PIPE_VBLANK_INTERRUPT_ENABLE);
- /* Clear any stale interrupt status */
- pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
- PIPE_VBLANK_INTERRUPT_STATUS);
- I915_WRITE(pipestat_reg, pipestat);
- (void) I915_READ(pipestat_reg); /* Posting read */
+ i915_disable_pipestat(dev_priv, pipe,
+ PIPE_VBLANK_INTERRUPT_ENABLE |
+ PIPE_START_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
}
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
I915_WRITE(HWSTAM, 0xeffe);
+ I915_WRITE(PIPEASTAT, 0);
+ I915_WRITE(PIPEBSTAT, 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
+ (void) I915_READ(IER);
}
int i915_driver_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- int ret, num_pipes = 2;
-
- /* Set initial unmasked IRQs to just the selected vblank pipes. */
- dev_priv->irq_mask_reg = ~0;
-
- ret = drm_vblank_init(dev, num_pipes);
- if (ret)
- return ret;
dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
- dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
- dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
- dev_priv->irq_mask_reg &= I915_INTERRUPT_ENABLE_MASK;
+ /* Unmask the interrupts that we always want on. */
+ dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX;
+
+ dev_priv->pipestat[0] = 0;
+ dev_priv->pipestat[1] = 0;
+
+ /* Disable pipe interrupt enables, clear pending pipe status */
+ I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
+ I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
+ /* Clear pending interrupt status */
+ I915_WRITE(IIR, I915_READ(IIR));
- I915_WRITE(IMR, dev_priv->irq_mask_reg);
I915_WRITE(IER, I915_INTERRUPT_ENABLE_MASK);
+ I915_WRITE(IMR, dev_priv->irq_mask_reg);
(void) I915_READ(IER);
opregion_enable_asle(dev);
void i915_driver_irq_uninstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 temp;
if (!dev_priv)
return;
dev_priv->vblank_pipe = 0;
I915_WRITE(HWSTAM, 0xffffffff);
+ I915_WRITE(PIPEASTAT, 0);
+ I915_WRITE(PIPEBSTAT, 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
- temp = I915_READ(PIPEASTAT);
- I915_WRITE(PIPEASTAT, temp);
- temp = I915_READ(PIPEBSTAT);
- I915_WRITE(PIPEBSTAT, temp);
- temp = I915_READ(IIR);
- I915_WRITE(IIR, temp);
+ I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
+ I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
+ I915_WRITE(IIR, I915_READ(IIR));
}
struct opregion_asle *asle = dev_priv->opregion.asle;
if (asle) {
- u32 pipeb_stats = I915_READ(PIPEBSTAT);
if (IS_MOBILE(dev)) {
- /* Many devices trigger events with a write to the
- legacy backlight controller, so we need to ensure
- that it's able to generate interrupts */
- I915_WRITE(PIPEBSTAT, pipeb_stats |=
- I915_LEGACY_BLC_EVENT_ENABLE);
- i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT |
- I915_DISPLAY_PIPE_B_EVENT_INTERRUPT);
- } else
- i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT);
+ unsigned long irqflags;
+
+ spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
+ i915_enable_pipestat(dev_priv, 1,
+ I915_LEGACY_BLC_EVENT_ENABLE);
+ spin_unlock_irqrestore(&dev_priv->user_irq_lock,
+ irqflags);
+ }
asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN |
ASLE_PFMB_EN;
if (IS_I965G(dev) && IS_MOBILE(dev))
dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
+ /* Hardware status page */
+ dev_priv->saveHWS = I915_READ(HWS_PGA);
+
/* Display arbitration control */
dev_priv->saveDSPARB = I915_READ(DSPARB);
if (IS_I965G(dev) && IS_MOBILE(dev))
I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
+ /* Hardware status page */
+ I915_WRITE(HWS_PGA, dev_priv->saveHWS);
+
/* Display arbitration */
I915_WRITE(DSPARB, dev_priv->saveDSPARB);
int mga_driver_load(struct drm_device * dev, unsigned long flags)
{
drm_mga_private_t *dev_priv;
+ int ret;
dev_priv = drm_alloc(sizeof(drm_mga_private_t), DRM_MEM_DRIVER);
if (!dev_priv)
dev->types[7] = _DRM_STAT_PRIMARY;
dev->types[8] = _DRM_STAT_SECONDARY;
+ ret = drm_vblank_init(dev, 1);
+
+ if (ret) {
+ (void) mga_driver_unload(dev);
+ return ret;
+ }
+
return 0;
}
int mga_driver_irq_postinstall(struct drm_device *dev)
{
drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
- int ret;
-
- ret = drm_vblank_init(dev, 1);
- if (ret)
- return ret;
DRM_INIT_WAITQUEUE(&dev_priv->fence_queue);
DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG |
DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED,
.dev_priv_size = sizeof(drm_r128_buf_priv_t),
+ .load = r128_driver_load,
.preclose = r128_driver_preclose,
.lastclose = r128_driver_lastclose,
.get_vblank_counter = r128_get_vblank_counter,
.patchlevel = DRIVER_PATCHLEVEL,
};
+int r128_driver_load(struct drm_device * dev, unsigned long flags)
+{
+ return drm_vblank_init(dev, 1);
+}
+
static int __init r128_init(void)
{
driver.num_ioctls = r128_max_ioctl;
extern int r128_driver_irq_postinstall(struct drm_device *dev);
extern void r128_driver_irq_uninstall(struct drm_device * dev);
extern void r128_driver_lastclose(struct drm_device * dev);
+extern int r128_driver_load(struct drm_device * dev, unsigned long flags);
extern void r128_driver_preclose(struct drm_device * dev,
struct drm_file *file_priv);
int r128_driver_irq_postinstall(struct drm_device *dev)
{
- return drm_vblank_init(dev, 1);
+ return 0;
}
void r128_driver_irq_uninstall(struct drm_device * dev)
if (ret != 0)
return ret;
+ ret = drm_vblank_init(dev, 2);
+ if (ret) {
+ radeon_driver_unload(dev);
+ return ret;
+ }
+
DRM_DEBUG("%s card detected\n",
((dev_priv->flags & RADEON_IS_AGP) ? "AGP" : (((dev_priv->flags & RADEON_IS_PCIE) ? "PCIE" : "PCI"))));
return ret;
{
drm_radeon_private_t *dev_priv =
(drm_radeon_private_t *) dev->dev_private;
- int ret;
atomic_set(&dev_priv->swi_emitted, 0);
DRM_INIT_WAITQUEUE(&dev_priv->swi_queue);
- ret = drm_vblank_init(dev, 2);
- if (ret)
- return ret;
-
dev->max_vblank_count = 0x001fffff;
radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1);
if (!dev_priv)
return -EINVAL;
- drm_vblank_init(dev, 1);
status = VIA_READ(VIA_REG_INTERRUPT);
VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_GLOBAL
| dev_priv->irq_enable_mask);
ret = drm_sman_init(&dev_priv->sman, 2, 12, 8);
if (ret) {
drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER);
+ return ret;
}
- return ret;
+
+ ret = drm_vblank_init(dev, 1);
+ if (ret) {
+ drm_sman_takedown(&dev_priv->sman);
+ drm_free(dev_priv, sizeof(drm_via_private_t), DRM_MEM_DRIVER);
+ return ret;
+ }
+
+ return 0;
}
int via_driver_unload(struct drm_device *dev)
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
APPLE_RDESC_JIS },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI),
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO),
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
APPLE_ISO_KEYBOARD },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS),
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
.driver_data = APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_SK8115) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
- { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_SUPER_Q2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_GOGOPEN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_PENPOWER) },
- { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GRETAGMACBETH, USB_DEVICE_ID_GRETAGMACBETH_HUEY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ }
#define USB_VENDOR_ID_GAMERON 0x0810
#define USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR 0x0001
+#define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR 0x0002
#define USB_VENDOR_ID_GENERAL_TOUCH 0x0dfc
static const struct hid_device_id pl_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR),
.driver_data = 1 }, /* Twin USB Joystick */
+ { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR),
+ .driver_data = 1 }, /* Twin USB Joystick */
{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003), }, /* GreenAsia Inc. USB Joystick */
{ }
};
if (insize > HID_MAX_BUFFER_SIZE)
insize = HID_MAX_BUFFER_SIZE;
- mutex_lock(&usbhid->setup);
if (hid_alloc_buffers(dev, hid)) {
ret = -ENOMEM;
goto fail;
hid_dump_device(hid);
set_bit(HID_STARTED, &usbhid->iofl);
- mutex_unlock(&usbhid->setup);
return 0;
usbhid->urbout = NULL;
usbhid->urbctrl = NULL;
hid_free_buffers(dev, hid);
- mutex_unlock(&usbhid->setup);
return ret;
}
if (WARN_ON(!usbhid))
return;
- mutex_lock(&usbhid->setup);
clear_bit(HID_STARTED, &usbhid->iofl);
spin_lock_irq(&usbhid->inlock); /* Sync with error handler */
set_bit(HID_DISCONNECTED, &usbhid->iofl);
usbhid->urbout = NULL;
hid_free_buffers(hid_to_usb_dev(hid), hid);
- mutex_unlock(&usbhid->setup);
}
static struct hid_ll_driver usb_hid_driver = {
hid->driver_data = usbhid;
usbhid->hid = hid;
- mutex_init(&usbhid->setup); /* needed on suspend/resume */
ret = hid_add_device(hid);
if (ret) {
struct hid_device *hid = usb_get_intfdata (intf);
struct usbhid_device *usbhid = hid->driver_data;
- mutex_lock(&usbhid->setup);
- if (!test_bit(HID_STARTED, &usbhid->iofl)) {
- mutex_unlock(&usbhid->setup);
+ if (!test_bit(HID_STARTED, &usbhid->iofl))
return 0;
- }
spin_lock_irq(&usbhid->inlock); /* Sync with error handler */
set_bit(HID_SUSPENDED, &usbhid->iofl);
spin_unlock_irq(&usbhid->inlock);
del_timer_sync(&usbhid->io_retry);
usb_kill_urb(usbhid->urbin);
- mutex_unlock(&usbhid->setup);
dev_dbg(&intf->dev, "suspend\n");
return 0;
}
struct usbhid_device *usbhid = hid->driver_data;
int status;
- mutex_lock(&usbhid->setup);
- if (!test_bit(HID_STARTED, &usbhid->iofl)) {
- mutex_unlock(&usbhid->setup);
+ if (!test_bit(HID_STARTED, &usbhid->iofl))
return 0;
- }
clear_bit(HID_SUSPENDED, &usbhid->iofl);
usbhid->retry_delay = 0;
status = hid_start_in(hid);
- mutex_unlock(&usbhid->setup);
dev_dbg(&intf->dev, "resume status %d\n", status);
return status;
}
dma_addr_t outbuf_dma; /* Output buffer dma */
spinlock_t outlock; /* Output fifo spinlock */
- struct mutex setup;
unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
struct timer_list io_retry; /* Retry timer */
unsigned long stop_retry; /* Time to give up, in jiffies */
if (adapter_parm[type].init.val)
line_set(port, 1, &adapter_parm[type].init);
- parport_release(adapter->pdev);
-
if (i2c_bit_add_bus(&adapter->adapter) < 0) {
printk(KERN_ERR "i2c-parport: Unable to register with I2C\n");
goto ERROR1;
return;
ERROR1:
+ parport_release(adapter->pdev);
parport_unregister_device(adapter->pdev);
ERROR0:
kfree(adapter);
if (adapter_parm[type].init.val)
line_set(port, 0, &adapter_parm[type].init);
+ parport_release(adapter->pdev);
parport_unregister_device(adapter->pdev);
if (prev)
prev->next = adapter->next;
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb.h>
#include <linux/workqueue.h>
#include <asm/irq.h>
+#include <asm/mach-types.h>
+
#include <mach/usb.h>
+#include <mach/mux.h>
#ifndef DEBUG
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_MACH_OMAP_H2
-
/* board-specific PM hooks */
-#include <asm/gpio.h>
-#include <mach/mux.h>
-#include <asm/mach-types.h>
-
+#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3)
#if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE)
}
+#endif
+
+#if defined(CONFIG_MACH_OMAP_H4)
+
+static void enable_vbus_draw(struct isp1301 *isp, unsigned mA)
+{
+ /* H4 controls this by DIP switch S2.4; no soft control.
+ * ON means the charger is always enabled. Leave it OFF
+ * unless the OTG port is used only in B-peripheral mode.
+ */
+}
+
+static void enable_vbus_source(struct isp1301 *isp)
+{
+ /* this board won't supply more than 8mA vbus power.
+ * some boards can switch a 100ma "unit load" (or more).
+ */
+}
+
+
+/* products will deliver OTG messages with LEDs, GUI, etc */
+static inline void notresponding(struct isp1301 *isp)
+{
+ printk(KERN_NOTICE "OTG device not responding.\n");
+}
+
+
#endif
/*-------------------------------------------------------------------------*/
* NOTE: guaranteeing certain response times might mean we shouldn't
* share keventd's work queue; a realtime task might be safest.
*/
-void
-isp1301_defer_work(struct isp1301 *isp, int work)
+static void isp1301_defer_work(struct isp1301 *isp, int work)
{
int status;
otg_ctrl &= ~OTG_XCEIV_INPUTS;
otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD);
-
if (int_src & INTR_SESS_VLD)
otg_ctrl |= OTG_ASESSVLD;
else if (isp->otg.state == OTG_STATE_A_WAIT_VFALL) {
static int otg_remove(struct platform_device *dev)
{
- otg_dev = 0;
+ otg_dev = NULL;
return 0;
}
-struct platform_driver omap_otg_driver = {
+static struct platform_driver omap_otg_driver = {
.probe = otg_probe,
.remove = otg_remove,
.driver = {
isp = dev_get_drvdata(dev);
+ /* FIXME -- not with a "new style" driver, it doesn't!! */
+
/* ugly -- i2c hijacks our memory hook to wait_for_completion() */
if (isp->i2c_release)
isp->i2c_release(dev);
otg_unbind(isp);
#endif
if (machine_is_omap_h2())
- omap_free_gpio(2);
+ gpio_free(2);
isp->timer.data = 0;
set_bit(WORK_STOP, &isp->todo);
flush_scheduled_work();
put_device(&i2c->dev);
- the_transceiver = 0;
+ the_transceiver = NULL;
return 0;
}
if (!host) {
omap_writew(0, OTG_IRQ_EN);
power_down(isp);
- isp->otg.host = 0;
+ isp->otg.host = NULL;
return 0;
}
isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
{
struct isp1301 *isp = container_of(otg, struct isp1301, otg);
+#ifndef CONFIG_USB_OTG
u32 l;
+#endif
if (!otg || isp != the_transceiver)
return -ENODEV;
if (!isp->otg.default_a)
enable_vbus_draw(isp, 0);
usb_gadget_vbus_disconnect(isp->otg.gadget);
- isp->otg.gadget = 0;
+ isp->otg.gadget = NULL;
power_down(isp);
return 0;
}
power_up(isp);
isp->otg.state = OTG_STATE_B_IDLE;
- if (machine_is_omap_h2())
+ if (machine_is_omap_h2() || machine_is_omap_h3())
isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
/*-------------------------------------------------------------------------*/
-static int __init isp1301_probe(struct i2c_client *i2c)
+static int __init
+isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
{
int status;
struct isp1301 *isp;
static void __exit isp_exit(void)
{
if (the_transceiver)
- otg_set_transceiver(0);
+ otg_set_transceiver(NULL);
i2c_del_driver(&isp1301_driver);
}
module_exit(isp_exit);
/* detach any active clients. This must be done first, because
* it can fail; in which case we give up. */
- list_for_each_entry_safe(client, _n, &adap->clients, list) {
+ list_for_each_entry_safe_reverse(client, _n, &adap->clients, list) {
struct i2c_driver *driver;
driver = client->driver;
hw->chipset = ide_acorn;
}
-static int __init
+static int __devinit
icside_register_v5(struct icside_state *state, struct expansion_card *ec)
{
void __iomem *base;
.swdma_mask = ATA_SWDMA2,
};
-static int __init
+static int __devinit
icside_register_v6(struct icside_state *state, struct expansion_card *ec)
{
void __iomem *ioc_base, *easi_base;
{
struct ml_device *ml = dev->ff->private;
struct ml_effect_state *state = &ml->states[effect_id];
+ unsigned long flags;
- spin_lock_bh(&ml->timer_lock);
+ spin_lock_irqsave(&ml->timer_lock, flags);
if (value > 0) {
debug("initiated play");
ml_play_effects(ml);
}
- spin_unlock_bh(&ml->timer_lock);
+ spin_unlock_irqrestore(&ml->timer_lock, flags);
return 0;
}
atkbd_disable(atkbd);
/* make sure we don't have a command in flight */
- flush_scheduled_work();
+ cancel_delayed_work_sync(&atkbd->event_work);
sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
input_unregister_device(atkbd->dev);
atkbd->force_release_mask);
}
+/*
+ * Inventec system with broken key release on volume keys
+ */
+static void atkbd_inventec_keymap_fixup(struct atkbd *atkbd)
+{
+ const unsigned int forced_release_keys[] = {
+ 0xae, 0xb0,
+ };
+ int i;
+
+ if (atkbd->set == 2)
+ for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++)
+ __set_bit(forced_release_keys[i],
+ atkbd->force_release_mask);
+}
+
/*
* atkbd_set_keycode_table() initializes keyboard's keycode table
* according to the selected scancode set
.callback = atkbd_setup_fixup,
.driver_data = atkbd_hp_keymap_fixup,
},
+ {
+ .ident = "Inventec Symphony",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
+ },
+ .callback = atkbd_setup_fixup,
+ .driver_data = atkbd_inventec_keymap_fixup,
+ },
{ }
};
static char *phone = "kip1000";
module_param(phone, charp, S_IRUSR);
-MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01}");
+MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}");
enum {
/* HID Registers */
}
}
+/*
+ * Keymap for ATCom AU-100
+ * http://www.atcom.cn/En_products_AU100.html
+ * http://www.packetizer.com/products/au100/
+ * http://www.voip-info.org/wiki/view/AU-100
+ *
+ * Contributed by daniel@gimpelevich.san-francisco.ca.us
+ */
+static unsigned short keymap_atcom(int scancode)
+{
+ switch (scancode) { /* phone key: */
+ case 0x82: return KEY_NUMERIC_0; /* 0 */
+ case 0x11: return KEY_NUMERIC_1; /* 1 */
+ case 0x12: return KEY_NUMERIC_2; /* 2 */
+ case 0x14: return KEY_NUMERIC_3; /* 3 */
+ case 0x21: return KEY_NUMERIC_4; /* 4 */
+ case 0x22: return KEY_NUMERIC_5; /* 5 */
+ case 0x24: return KEY_NUMERIC_6; /* 6 */
+ case 0x41: return KEY_NUMERIC_7; /* 7 */
+ case 0x42: return KEY_NUMERIC_8; /* 8 */
+ case 0x44: return KEY_NUMERIC_9; /* 9 */
+ case 0x84: return KEY_NUMERIC_POUND; /* # */
+ case 0x81: return KEY_NUMERIC_STAR; /* * */
+ case 0x18: return KEY_ENTER; /* pickup */
+ case 0x28: return KEY_ESC; /* hangup */
+ case 0x48: return KEY_LEFT; /* left arrow */
+ case 0x88: return KEY_RIGHT; /* right arrow */
+ default: return special_keymap(scancode);
+ }
+}
+
static unsigned short (*keymap)(int) = keymap_kip1000;
/*
keymap = keymap_usbph01;
printk(KERN_INFO KBUILD_MODNAME ": "
"Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
+ } else if (!strcasecmp(phone, "atcom")) {
+ keymap = keymap_atcom;
+ printk(KERN_INFO KBUILD_MODNAME ": "
+ "Keymap for ATCom AU-100 phone loaded\n");
} else {
printk(KERN_ERR KBUILD_MODNAME ": "
"Unsupported phone: %s\n", phone);
*/
static int hgpk_validate_byte(unsigned char *packet)
{
- return (packet[0] & 0x0C) == 0x08;
+ return (packet[0] & 0x0C) != 0x08;
}
static void hgpk_process_packet(struct psmouse *psmouse)
DMI_MATCH(DMI_PRODUCT_NAME, "2656"),
},
},
+ {
+ .ident = "Dell XPS M1530",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"),
+ },
+ },
+ {
+ .ident = "Compal HEL80I",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"),
+ },
+ },
{ }
};
* - Support Intuos3 4x6
* v1.47 (pc) - Added support for Bamboo
* v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX
+ * v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A)
*/
/*
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.48"
+#define DRIVER_VERSION "v1.49"
#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
#define DRIVER_LICENSE "GPL"
struct usb_device *usbdev;
struct usb_interface *intf;
struct urb *irq;
- struct wacom_wac * wacom_wac;
+ struct wacom_wac *wacom_wac;
struct mutex lock;
unsigned int open:1;
char phys[32];
};
struct wacom_combo {
- struct wacom * wacom;
- struct urb * urb;
+ struct wacom *wacom;
+ struct urb *urb;
};
extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
extern __u16 wacom_le16_to_cpu(unsigned char *data);
extern __u16 wacom_be16_to_cpu(unsigned char *data);
-extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id);
-extern const struct usb_device_id * get_device_table(void);
+extern struct wacom_features *get_wacom_feature(const struct usb_device_id *id);
+extern const struct usb_device_id *get_device_table(void);
#endif
#include "wacom.h"
#include "wacom_wac.h"
+/* defines to get HID report descriptor */
+#define HID_DEVICET_HID (USB_TYPE_CLASS | 0x01)
+#define HID_DEVICET_REPORT (USB_TYPE_CLASS | 0x02)
+#define HID_USAGE_UNDEFINED 0x00
+#define HID_USAGE_PAGE 0x05
+#define HID_USAGE_PAGE_DIGITIZER 0x0d
+#define HID_USAGE_PAGE_DESKTOP 0x01
+#define HID_USAGE 0x09
+#define HID_USAGE_X 0x30
+#define HID_USAGE_Y 0x31
+#define HID_USAGE_X_TILT 0x3d
+#define HID_USAGE_Y_TILT 0x3e
+#define HID_USAGE_FINGER 0x22
+#define HID_USAGE_STYLUS 0x20
+#define HID_COLLECTION 0xc0
+
+enum {
+ WCM_UNDEFINED = 0,
+ WCM_DESKTOP,
+ WCM_DIGITIZER,
+};
+
+struct hid_descriptor {
+ struct usb_descriptor_header header;
+ __le16 bcdHID;
+ u8 bCountryCode;
+ u8 bNumDescriptors;
+ u8 bDescriptorType;
+ __le16 wDescriptorLength;
+} __attribute__ ((packed));
+
+/* defines to get/set USB message */
#define USB_REQ_GET_REPORT 0x01
#define USB_REQ_SET_REPORT 0x09
+#define WAC_HID_FEATURE_REPORT 0x03
static int usb_get_report(struct usb_interface *intf, unsigned char type,
unsigned char id, void *buf, int size)
void wacom_report_key(void *wcombo, unsigned int key_type, int key_data)
{
input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data);
- return;
}
void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data)
{
input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data);
- return;
}
void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data)
{
input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data);
- return;
}
void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value)
{
input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value);
- return;
}
__u16 wacom_be16_to_cpu(unsigned char *data)
void wacom_input_sync(void *wcombo)
{
input_sync(get_input_dev((struct wacom_combo *)wcombo));
- return;
}
static int wacom_open(struct input_dev *dev)
void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_1) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_1) |
BIT_MASK(BTN_5);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
}
input_dev->evbit[0] |= BIT_MASK(EV_MSC);
input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
BIT_MASK(BTN_4);
}
{
input_dev->evbit[0] |= BIT_MASK(EV_REL);
input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
+ input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_STYLUS2);
void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3);
input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_4) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_4) |
BIT_MASK(BTN_5) | BIT_MASK(BTN_6) | BIT_MASK(BTN_7);
input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
}
void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
}
void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
input_dev->evbit[0] |= BIT_MASK(EV_MSC) | BIT_MASK(EV_REL);
input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
+ input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE) |
BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2) |
- BIT_MASK(BTN_TOOL_RUBBER);
+ input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2);
}
void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER);
}
+static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc,
+ struct wacom_wac *wacom_wac)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct wacom_features *features = wacom_wac->features;
+ char limit = 0, result = 0;
+ int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0;
+ unsigned char *report;
+
+ report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL);
+ if (!report)
+ return -ENOMEM;
+
+ /* retrive report descriptors */
+ do {
+ result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ USB_REQ_GET_DESCRIPTOR,
+ USB_RECIP_INTERFACE | USB_DIR_IN,
+ HID_DEVICET_REPORT << 8,
+ intf->altsetting[0].desc.bInterfaceNumber, /* interface */
+ report,
+ hid_desc->wDescriptorLength,
+ 5000); /* 5 secs */
+ } while (result < 0 && limit++ < 5);
+
+ if (result < 0)
+ goto out;
+
+ for (i = 0; i < hid_desc->wDescriptorLength; i++) {
+
+ switch (report[i]) {
+ case HID_USAGE_PAGE:
+ switch (report[i + 1]) {
+ case HID_USAGE_PAGE_DIGITIZER:
+ usage = WCM_DIGITIZER;
+ i++;
+ break;
+
+ case HID_USAGE_PAGE_DESKTOP:
+ usage = WCM_DESKTOP;
+ i++;
+ break;
+ }
+ break;
+
+ case HID_USAGE:
+ switch (report[i + 1]) {
+ case HID_USAGE_X:
+ if (usage == WCM_DESKTOP) {
+ if (finger) {
+ features->touch_x_max =
+ features->touch_y_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ features->x_max =
+ wacom_le16_to_cpu(&report[i + 6]);
+ i += 7;
+ } else if (pen) {
+ features->x_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ i += 4;
+ }
+ } else if (usage == WCM_DIGITIZER) {
+ /* max pressure isn't reported
+ features->pressure_max = (unsigned short)
+ (report[i+4] << 8 | report[i + 3]);
+ */
+ features->pressure_max = 255;
+ i += 4;
+ }
+ break;
+
+ case HID_USAGE_Y:
+ if (usage == WCM_DESKTOP)
+ features->y_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ i += 4;
+ break;
+
+ case HID_USAGE_FINGER:
+ finger = 1;
+ i++;
+ break;
+
+ case HID_USAGE_STYLUS:
+ pen = 1;
+ i++;
+ break;
+
+ case HID_USAGE_UNDEFINED:
+ if (usage == WCM_DESKTOP && finger) /* capacity */
+ features->pressure_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ i += 4;
+ break;
+ }
+ break;
+
+ case HID_COLLECTION:
+ /* reset UsagePage ans Finger */
+ finger = usage = 0;
+ break;
+ }
+ }
+
+ result = 0;
+
+ out:
+ kfree(report);
+ return result;
+}
+
static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_host_interface *interface = intf->cur_altsetting;
struct usb_endpoint_descriptor *endpoint;
struct wacom *wacom;
struct wacom_wac *wacom_wac;
+ struct wacom_features *features;
struct input_dev *input_dev;
int error = -ENOMEM;
char rep_data[2], limit = 0;
+ struct hid_descriptor *hid_desc;
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL);
usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
- wacom_wac->features = get_wacom_feature(id);
- BUG_ON(wacom_wac->features->pktlen > 10);
+ wacom_wac->features = features = get_wacom_feature(id);
+ BUG_ON(features->pktlen > 10);
input_dev->name = wacom_wac->features->name;
wacom->wacom_wac = wacom_wac;
input_dev->open = wacom_open;
input_dev->close = wacom_close;
+ endpoint = &intf->cur_altsetting->endpoint[0].desc;
+
+ /* TabletPC need to retrieve the physical and logical maximum from report descriptor */
+ if (wacom_wac->features->type == TABLETPC) {
+ if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
+ if (usb_get_extra_descriptor(&interface->endpoint[0],
+ HID_DEVICET_REPORT, &hid_desc)) {
+ printk("wacom: can not retrive extra class descriptor\n");
+ goto fail2;
+ }
+ }
+ error = wacom_parse_hid(intf, hid_desc, wacom_wac);
+ if (error)
+ goto fail2;
+ }
+
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_PEN) |
BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS);
- input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0);
- input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0);
- input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0);
+ if (features->type == TABLETPC) {
+ input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_DOUBLETAP);
+ input_set_abs_params(input_dev, ABS_RX, 0, features->touch_x_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_RY, 0, features->touch_y_max, 4, 0);
+ }
input_dev->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC);
wacom_init_input_dev(input_dev, wacom_wac);
- endpoint = &intf->cur_altsetting->endpoint[0].desc;
-
usb_fill_int_urb(wacom->irq, dev,
usb_rcvintpipe(dev, endpoint->bEndpointAddress),
wacom_wac->data, wacom_wac->features->pktlen,
if (error)
goto fail3;
- /* Ask the tablet to report tablet data. Repeat until it succeeds */
- do {
- rep_data[0] = 2;
- rep_data[1] = 2;
- usb_set_report(intf, 3, 2, rep_data, 2);
- usb_get_report(intf, 3, 2, rep_data, 2);
- } while (rep_data[1] != 2 && limit++ < 5);
+ /*
+ * Ask the tablet to report tablet data if it is not a Tablet PC.
+ * Repeat until it succeeds
+ */
+ if (wacom_wac->features->type != TABLETPC) {
+ do {
+ rep_data[0] = 2;
+ rep_data[1] = 2;
+ error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
+ 2, rep_data, 2);
+ if (error >= 0)
+ error = usb_get_report(intf,
+ WAC_HID_FEATURE_REPORT, 2,
+ rep_data, 2);
+ } while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
+ }
usb_set_intfdata(intf, wacom);
return 0;
usb_kill_urb(wacom->irq);
input_unregister_device(wacom->dev);
usb_free_urb(wacom->irq);
- usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma);
+ usb_buffer_free(interface_to_usbdev(intf), 10,
+ wacom->wacom_wac->data, wacom->data_dma);
kfree(wacom->wacom_wac);
kfree(wacom);
}
return 1;
}
+int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
+{
+ char *data = wacom->data;
+ int prox = 0, pressure;
+ static int stylusInProx, touchInProx = 1, touchOut;
+ struct urb *urb = ((struct wacom_combo *)wcombo)->urb;
+
+ dbg("wacom_tpc_irq: received report #%d", data[0]);
+
+ if (urb->actual_length == 5 || data[0] == 6) { /* Touch data */
+ if (urb->actual_length == 5) { /* with touch */
+ prox = data[0] & 0x03;
+ } else { /* with capacity */
+ prox = data[1] & 0x03;
+ }
+
+ if (!stylusInProx) { /* stylus not in prox */
+ if (prox) {
+ if (touchInProx) {
+ wacom->tool[1] = BTN_TOOL_DOUBLETAP;
+ wacom->id[0] = TOUCH_DEVICE_ID;
+ if (urb->actual_length != 5) {
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+ wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6]));
+ wacom_report_key(wcombo, BTN_TOUCH, wacom_le16_to_cpu(&data[6]));
+ } else {
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
+ wacom_report_key(wcombo, BTN_TOUCH, 1);
+ }
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
+ touchOut = 1;
+ return 1;
+ }
+ } else {
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ touchOut = 0;
+ touchInProx = 1;
+ return 1;
+ }
+ } else if (touchOut || !prox) { /* force touch out-prox */
+ wacom_report_abs(wcombo, ABS_MISC, TOUCH_DEVICE_ID);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ touchOut = 0;
+ touchInProx = 1;
+ return 1;
+ }
+ } else if (data[0] == 2) { /* Penabled */
+ prox = data[1] & 0x20;
+
+ touchInProx = 0;
+
+ wacom->id[0] = ERASER_DEVICE_ID;
+
+ /*
+ * if going from out of proximity into proximity select between the eraser
+ * and the pen based on the state of the stylus2 button, choose eraser if
+ * pressed else choose pen. if not a proximity change from out to in, send
+ * an out of proximity for previous tool then a in for new tool.
+ */
+ if (prox) { /* in prox */
+ if (!wacom->tool[0]) {
+ /* Going into proximity select tool */
+ wacom->tool[1] = (data[1] & 0x08) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+ if (wacom->tool[1] == BTN_TOOL_PEN)
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ } else if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[1] & 0x08)) {
+ /*
+ * was entered with stylus2 pressed
+ * report out proximity for previous tool
+ */
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ wacom_report_key(wcombo, wacom->tool[1], 0);
+ wacom_input_sync(wcombo);
+
+ /* set new tool */
+ wacom->tool[1] = BTN_TOOL_PEN;
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ return 0;
+ }
+ if (wacom->tool[1] != BTN_TOOL_RUBBER) {
+ /* Unknown tool selected default to pen tool */
+ wacom->tool[1] = BTN_TOOL_PEN;
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ }
+ wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
+ wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+ pressure = ((data[7] & 0x01) << 8) | data[6];
+ if (pressure < 0)
+ pressure = wacom->features->pressure_max + pressure + 1;
+ wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
+ wacom_report_key(wcombo, BTN_TOUCH, pressure);
+ } else {
+ wacom_report_abs(wcombo, ABS_PRESSURE, 0);
+ wacom_report_key(wcombo, BTN_STYLUS, 0);
+ wacom_report_key(wcombo, BTN_STYLUS2, 0);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ }
+ wacom_report_key(wcombo, wacom->tool[1], prox);
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ stylusInProx = prox;
+ wacom->tool[0] = prox;
+ return 1;
+ }
+ return 0;
+}
+
int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
{
switch (wacom_wac->features->type) {
case PENPARTNER:
- return (wacom_penpartner_irq(wacom_wac, wcombo));
- break;
+ return wacom_penpartner_irq(wacom_wac, wcombo);
+
case PL:
- return (wacom_pl_irq(wacom_wac, wcombo));
- break;
+ return wacom_pl_irq(wacom_wac, wcombo);
+
case WACOM_G4:
case GRAPHIRE:
case WACOM_MO:
- return (wacom_graphire_irq(wacom_wac, wcombo));
- break;
+ return wacom_graphire_irq(wacom_wac, wcombo);
+
case PTU:
- return (wacom_ptu_irq(wacom_wac, wcombo));
- break;
+ return wacom_ptu_irq(wacom_wac, wcombo);
+
case INTUOS:
case INTUOS3S:
case INTUOS3:
case INTUOS3L:
case CINTIQ:
case WACOM_BEE:
- return (wacom_intuos_irq(wacom_wac, wcombo));
- break;
+ return wacom_intuos_irq(wacom_wac, wcombo);
+
+ case TABLETPC:
+ return wacom_tpc_irq(wacom_wac, wcombo);
+
default:
return 0;
}
/* fall through */
case INTUOS3S:
input_dev_i3s(input_dev, wacom_wac);
+ /* fall through */
case INTUOS:
input_dev_i(input_dev, wacom_wac);
break;
case PL:
case PTU:
+ case TABLETPC:
input_dev_pl(input_dev, wacom_wac);
- break;
+ /* fall through */
case PENPARTNER:
input_dev_pt(input_dev, wacom_wac);
break;
{ "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 },
{ "Wacom BambooFun 4x5", 9, 14760, 9225, 511, 63, WACOM_MO },
{ "Wacom BambooFun 6x8", 9, 21648, 13530, 511, 63, WACOM_MO },
+ { "Wacom Bamboo1 Medium",8, 16704, 12064, 511, 63, GRAPHIRE },
{ "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE },
{ "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE },
{ "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE },
{ "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ },
{ "Wacom Cintiq 20WSX", 10, 86680, 54180, 1023, 63, WACOM_BEE },
{ "Wacom Cintiq 12WX", 10, 53020, 33440, 1023, 63, WACOM_BEE },
+ { "Wacom DTU1931", 8, 37832, 30305, 511, 0, PL },
+ { "Wacom ISDv4 90", 8, 26202, 16325, 255, 0, TABLETPC },
+ { "Wacom ISDv4 93", 8, 26202, 16325, 255, 0, TABLETPC },
+ { "Wacom ISDv4 9A", 8, 26202, 16325, 255, 0, TABLETPC },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS },
{ }
};
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x17) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x18) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x19) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC5) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC7) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x90) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x93) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x9A) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
{ }
};
-const struct usb_device_id * get_device_table(void) {
- const struct usb_device_id * id_table = wacom_ids;
+const struct usb_device_id *get_device_table(void)
+{
+ const struct usb_device_id *id_table = wacom_ids;
+
return id_table;
}
-struct wacom_features * get_wacom_feature(const struct usb_device_id * id) {
+struct wacom_features * get_wacom_feature(const struct usb_device_id *id)
+{
int index = id - wacom_ids;
struct wacom_features *wf = &wacom_features[index];
+
return wf;
}
#define WACOM_WAC_H
#define STYLUS_DEVICE_ID 0x02
+#define TOUCH_DEVICE_ID 0x03
#define CURSOR_DEVICE_ID 0x06
#define ERASER_DEVICE_ID 0x0A
#define PAD_DEVICE_ID 0x0F
CINTIQ,
WACOM_BEE,
WACOM_MO,
+ TABLETPC,
MAX_TYPE
};
int pressure_max;
int distance_max;
int type;
+ int touch_x_max;
+ int touch_y_max;
};
struct wacom_wac {
input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
printk(KERN_INFO "elo: %sTouch touchscreen, fw: %02x.%02x, "
- "features: %x02x, controller: 0x%02x\n",
+ "features: 0x%02x, controller: 0x%02x\n",
elo_types[(packet[1] -'0') & 0x03],
packet[5], packet[4], packet[3], packet[7]);
{ "" }
};
-static struct xenbus_driver xenkbd = {
+static struct xenbus_driver xenkbd_driver = {
.name = "vkbd",
.owner = THIS_MODULE,
.ids = xenkbd_ids,
if (xen_initial_domain())
return -ENODEV;
- return xenbus_register_frontend(&xenkbd);
+ return xenbus_register_frontend(&xenkbd_driver);
}
static void __exit xenkbd_cleanup(void)
{
- xenbus_unregister_driver(&xenkbd);
+ xenbus_unregister_driver(&xenkbd_driver);
}
module_init(xenkbd_init);
memcpy(&cards[i], &cards[i + 1], sizeof(cards[i]));
}
-static int HiSax_inithardware(int *busy_flag)
+static int __init HiSax_inithardware(int *busy_flag)
{
int foundcards = 0;
int i = 0;
printk(KERN_INFO "HiSax module removed\n");
}
-int hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card)
+#ifdef CONFIG_HOTPLUG
+
+int __devinit hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card)
{
u_char ids[16];
int ret = -1;
}
EXPORT_SYMBOL(hisax_init_pcmcia);
+#endif
+
EXPORT_SYMBOL(HiSax_closecard);
#include "hisax_if.h"
static void hisax_bh(struct work_struct *work);
static void EChannel_proc_rcv(struct hisax_d_if *d_if);
+static int hisax_setup_card_dynamic(struct IsdnCard *card)
+{
+ return 2;
+}
+
int hisax_register(struct hisax_d_if *hisax_d_if, struct hisax_b_if *b_if[],
char *name, int protocol)
{
cards[i].protocol = protocol;
sprintf(id, "%s%d", name, i);
nrcards++;
- retval = checkcard(i, id, NULL, hisax_d_if->owner, hisax_cs_setup_card);
+ retval = checkcard(i, id, NULL, hisax_d_if->owner,
+ hisax_setup_card_dynamic);
if (retval == 0) { // yuck
cards[i].typ = 0;
nrcards--;
cancel_rearming_delayed_work(&rm->cpu[1].sniffer);
}
-static int rackmeter_setup(struct rackmeter *rm)
+static int __devinit rackmeter_setup(struct rackmeter *rm)
{
pr_debug("rackmeter: setting up i2s..\n");
rackmeter_setup_i2s(rm);
{ }
};
-static struct macio_driver rackmeter_drv = {
+static struct macio_driver rackmeter_driver = {
.name = "rackmeter",
.owner = THIS_MODULE,
.match_table = rackmeter_match,
.probe = rackmeter_probe,
- .remove = rackmeter_remove,
+ .remove = __devexit_p(rackmeter_remove),
.shutdown = rackmeter_shutdown,
};
{
pr_debug("rackmeter_init()\n");
- return macio_register_driver(&rackmeter_drv);
+ return macio_register_driver(&rackmeter_driver);
}
static void __exit rackmeter_exit(void)
{
pr_debug("rackmeter_exit()\n");
- macio_unregister_driver(&rackmeter_drv);
+ macio_unregister_driver(&rackmeter_driver);
}
module_init(rackmeter_init);
goto outinput;
}
- if (!acpi_video_backlight_support()) {
- printk(KERN_INFO DRV_PFX "Sony: Brightness ignored, must be "
+ if (acpi_video_backlight_support()) {
+ printk(KERN_INFO DRV_PFX "brightness ignored, must be "
"controlled by ACPI video driver\n");
} else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT",
&handle))) {
static u8 fan_control_initial_status;
static u8 fan_control_desired_level;
+static u8 fan_control_resume_level;
static int fan_watchdog_maxinterval;
static struct mutex fan_mutex;
case TPACPI_FAN_WR_ACPI_FANS:
case TPACPI_FAN_WR_TPEC:
- if ((level != TP_EC_FAN_AUTO) &&
- (level != TP_EC_FAN_FULLSPEED) &&
+ if (!(level & TP_EC_FAN_AUTO) &&
+ !(level & TP_EC_FAN_FULLSPEED) &&
((level < 0) || (level > 7)))
return -EINVAL;
static void fan_suspend(pm_message_t state)
{
+ int rc;
+
if (!fan_control_allowed)
return;
/* Store fan status in cache */
- fan_get_status_safe(NULL);
+ fan_control_resume_level = 0;
+ rc = fan_get_status_safe(&fan_control_resume_level);
+ if (rc < 0)
+ printk(TPACPI_NOTICE
+ "failed to read fan level for later "
+ "restore during resume: %d\n", rc);
+
+ /* if it is undefined, don't attempt to restore it.
+ * KEEP THIS LAST */
if (tp_features.fan_ctrl_status_undef)
- fan_control_desired_level = TP_EC_FAN_AUTO;
+ fan_control_resume_level = 0;
}
static void fan_resume(void)
{
- u8 saved_fan_level;
u8 current_level = 7;
bool do_set = false;
+ int rc;
/* DSDT *always* updates status on resume */
tp_features.fan_ctrl_status_undef = 0;
- saved_fan_level = fan_control_desired_level;
if (!fan_control_allowed ||
+ !fan_control_resume_level ||
(fan_get_status_safe(¤t_level) < 0))
return;
switch (fan_control_access_mode) {
case TPACPI_FAN_WR_ACPI_SFAN:
- do_set = (saved_fan_level > current_level);
+ /* never decrease fan level */
+ do_set = (fan_control_resume_level > current_level);
break;
case TPACPI_FAN_WR_ACPI_FANS:
case TPACPI_FAN_WR_TPEC:
- do_set = ((saved_fan_level & TP_EC_FAN_FULLSPEED) ||
- (saved_fan_level == 7 &&
- !(current_level & TP_EC_FAN_FULLSPEED)));
+ /* never decrease fan level, scale is:
+ * TP_EC_FAN_FULLSPEED > 7 >= TP_EC_FAN_AUTO
+ *
+ * We expect the firmware to set either 7 or AUTO, but we
+ * handle FULLSPEED out of paranoia.
+ *
+ * So, we can safely only restore FULLSPEED or 7, anything
+ * else could slow the fan. Restoring AUTO is useless, at
+ * best that's exactly what the DSDT already set (it is the
+ * slower it uses).
+ *
+ * Always keep in mind that the DSDT *will* have set the
+ * fans to what the vendor supposes is the best level. We
+ * muck with it only to speed the fan up.
+ */
+ if (fan_control_resume_level != 7 &&
+ !(fan_control_resume_level & TP_EC_FAN_FULLSPEED))
+ return;
+ else
+ do_set = !(current_level & TP_EC_FAN_FULLSPEED) &&
+ (current_level != fan_control_resume_level);
break;
default:
return;
if (do_set) {
printk(TPACPI_NOTICE
"restoring fan level to 0x%02x\n",
- saved_fan_level);
- fan_set_level_safe(saved_fan_level);
+ fan_control_resume_level);
+ rc = fan_set_level_safe(fan_control_resume_level);
+ if (rc < 0)
+ printk(TPACPI_NOTICE
+ "failed to restore fan level: %d\n", rc);
}
}
}
/*
- * OK, now the LEB is locked and we can safely start moving iy. Since
+ * OK, now the LEB is locked and we can safely start moving it. Since
* this function utilizes thie @ubi->peb1_buf buffer which is shared
* with some other functions, so lock the buffer by taking the
* @ubi->buf_mutex.
}
err = ubi_io_read_data(ubi, buf, pnum, 0, len);
- if (err && err != UBI_IO_BITFLIPS)
+ if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
goto out_free_buf;
data_crc = be32_to_cpu(vid_hdr->data_crc);
ubi_msg("%s: %d consecutive failures",
ubi->bgt_name, WL_MAX_FAILURES);
ubi_ro_mode(ubi);
- break;
+ ubi->thread_enabled = 0;
+ continue;
}
} else
failures = 0;
config FEC_MPC52xx
tristate "MPC52xx FEC driver"
- depends on PPC_MPC52xx && PPC_BESTCOMM_FEC
+ depends on PPC_MPC52xx && PPC_BESTCOMM
select CRC32
select PHYLIB
+ select PPC_BESTCOMM_FEC
---help---
This option enables support for the MPC5200's on-chip
Fast Ethernet Controller
* Once we know the feature-set enabled for the device, we'll cache
* the register offset the descriptor ring is assigned to.
**/
-static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
+static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
{
int feature_mask = 0, rss_i;
int i, txr_idx, rxr_idx;
* number of queues at compile-time. The polling_netdev array is
* intended for Multiqueue, but should work fine with a single queue.
**/
-static int __devinit ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
+static int ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
{
int i;
* Attempt to configure the interrupts using the best available
* capabilities of the hardware and the kernel.
**/
-static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter
- *adapter)
+static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
{
int err = 0;
int vector, v_budget;
* - Hardware queue count (num_*_queues)
* - defined by miscellaneous hardware support/features (RSS, etc.)
**/
-static int __devinit ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
+static int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
{
int err;
return 0;
}
-static int ibmtr_resume(struct pcmcia_device *link)
+static int __devinit ibmtr_resume(struct pcmcia_device *link)
{
ibmtr_dev_t *info = link->priv;
struct net_device *dev = info->dev;
* This routine has a simple purpose -- make the SMC chip generate an
* interrupt, so an auto-detect routine can detect it, and find the IRQ,
*/
-static int __init smc911x_findirq(struct net_device *dev)
+static int __devinit smc911x_findirq(struct net_device *dev)
{
struct smc911x_local *lp = netdev_priv(dev);
int timeout = 20;
* o actually GRAB the irq.
* o GRAB the region
*/
-static int __init smc911x_probe(struct net_device *dev)
+static int __devinit smc911x_probe(struct net_device *dev)
{
struct smc911x_local *lp = netdev_priv(dev);
int i, retval;
* 0 --> there is a device
* anything else, error
*/
-static int smc911x_drv_probe(struct platform_device *pdev)
+static int __devinit smc911x_drv_probe(struct platform_device *pdev)
{
#ifdef SMC_DYNAMIC_BUS_CONFIG
struct smc911x_platdata *pd = pdev->dev.platform_data;
return ret;
}
-static int smc911x_drv_remove(struct platform_device *pdev)
+static int __devexit smc911x_drv_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct smc911x_local *lp = netdev_priv(ndev);
static struct platform_driver smc911x_driver = {
.probe = smc911x_drv_probe,
- .remove = smc911x_drv_remove,
+ .remove = __devexit_p(smc911x_drv_remove),
.suspend = smc911x_drv_suspend,
.resume = smc911x_drv_resume,
.driver = {
* I just deleted auto_irq.c, since it was never built...
* --jgarzik
*/
-static int __init smc_findirq(struct smc_local *lp)
+static int __devinit smc_findirq(struct smc_local *lp)
{
void __iomem *ioaddr = lp->base;
int timeout = 20;
* o actually GRAB the irq.
* o GRAB the region
*/
-static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
+static int __devinit smc_probe(struct net_device *dev, void __iomem *ioaddr,
unsigned long irq_flags)
{
struct smc_local *lp = netdev_priv(dev);
* 0 --> there is a device
* anything else, error
*/
-static int smc_drv_probe(struct platform_device *pdev)
+static int __devinit smc_drv_probe(struct platform_device *pdev)
{
struct smc91x_platdata *pd = pdev->dev.platform_data;
struct smc_local *lp;
return ret;
}
-static int smc_drv_remove(struct platform_device *pdev)
+static int __devexit smc_drv_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct smc_local *lp = netdev_priv(ndev);
static struct platform_driver smc_driver = {
.probe = smc_drv_probe,
- .remove = smc_drv_remove,
+ .remove = __devexit_p(smc_drv_remove),
.suspend = smc_drv_suspend,
.resume = smc_drv_resume,
.driver = {
return 0;
}
-static struct xenbus_driver netfront = {
+static struct xenbus_driver netfront_driver = {
.name = "vif",
.owner = THIS_MODULE,
.ids = netfront_ids,
printk(KERN_INFO "Initialising Xen virtual ethernet driver.\n");
- return xenbus_register_frontend(&netfront);
+ return xenbus_register_frontend(&netfront_driver);
}
module_init(netif_init);
if (xen_initial_domain())
return;
- xenbus_unregister_driver(&netfront);
+ xenbus_unregister_driver(&netfront_driver);
}
module_exit(netif_exit);
return 0;
}
-static int __devinit pci_setup(char *str)
+static int __init pci_setup(char *str)
{
while (str) {
char *k = strchr(str, ',');
* link, then start recursive peer enumeration. Returns %0 if
* enumeration succeeds or %-EBUSY if enumeration fails.
*/
-int rio_enum_mport(struct rio_mport *mport)
+int __devinit rio_enum_mport(struct rio_mport *mport)
{
struct rio_net *net = NULL;
int rc = 0;
* peer discovery. Returns %0 if discovery succeeds or %-EBUSY
* on failure.
*/
-int rio_disc_mport(struct rio_mport *mport)
+int __devinit rio_disc_mport(struct rio_mport *mport)
{
struct rio_net *net = NULL;
int enum_timeout_flag = 0;
device_initcall(rio_init);
-int rio_init_mports(void)
+int __devinit rio_init_mports(void)
{
int rc = 0;
struct rio_mport *port;
advansys_wide_free_mem(boardp);
free_irq(boardp->irq, shost);
err_free_dma:
+#ifdef CONFIG_ISA
if (shost->dma_channel != NO_ISA_DMA)
free_dma(shost->dma_channel);
+#endif
err_free_proc:
kfree(boardp->prtbuf);
err_unmap:
ASC_DBG(1, "begin\n");
scsi_remove_host(shost);
free_irq(board->irq, shost);
+#ifdef CONFIG_ISA
if (shost->dma_channel != NO_ISA_DMA) {
ASC_DBG(1, "free_dma()\n");
free_dma(shost->dma_channel);
}
+#endif
if (ASC_NARROW_BOARD(board)) {
dma_unmap_single(board->dev,
board->dvc_var.asc_dvc_var.overrun_dma,
.remove = gdth_pci_remove_one,
};
-static void gdth_pci_remove_one(struct pci_dev *pdev)
+static void __devexit gdth_pci_remove_one(struct pci_dev *pdev)
{
gdth_ha_str *ha = pci_get_drvdata(pdev);
pci_disable_device(pdev);
}
-static int gdth_pci_init_one(struct pci_dev *pdev,
+static int __devinit gdth_pci_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
ushort vendor = pdev->vendor;
#endif /* CONFIG_ISA */
#ifdef CONFIG_PCI
-static int gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr,
+static int __devinit gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr,
gdth_ha_str *ha)
{
register gdt6_dpram_str __iomem *dp6_ptr;
/* controller protocol functions */
-static void __init gdth_enable_int(gdth_ha_str *ha)
+static void __devinit gdth_enable_int(gdth_ha_str *ha)
{
ulong flags;
gdt2_dpram_str __iomem *dp2_ptr;
/* search for devices */
-static int __init gdth_search_drives(gdth_ha_str *ha)
+static int __devinit gdth_search_drives(gdth_ha_str *ha)
{
ushort cdev_cnt, i;
int ok;
#endif /* CONFIG_EISA */
#ifdef CONFIG_PCI
-static int gdth_pci_probe_one(gdth_pci_str *pcistr,
+static int __devinit gdth_pci_probe_one(gdth_pci_str *pcistr,
gdth_ha_str **ha_out)
{
struct Scsi_Host *shp;
static int ulite_request_port(struct uart_port *port)
{
- pr_debug("ulite console: port=%p; port->mapbase=%x\n",
- port, port->mapbase);
+ pr_debug("ulite console: port=%p; port->mapbase=%llx\n",
+ port, (unsigned long long) port->mapbase);
if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) {
dev_err(port->dev, "Memory region busy\n");
nuke(loop_ep, -ESHUTDOWN);
spin_unlock_irqrestore(&udc_controller->lock, flags);
+ /* report disconnect; the controller is already quiesced */
+ driver->disconnect(&udc_controller->gadget);
+
/* unbind gadget and unhook driver. */
driver->unbind(&udc_controller->gadget);
udc_controller->gadget.dev.driver = NULL;
nuke(loop_ep, -ESHUTDOWN);
spin_unlock_irqrestore(&udc_controller->lock, flags);
+ /* report disconnect; the controller is already quiesced */
+ driver->disconnect(&udc_controller->gadget);
+
/* unbind gadget and unhook driver. */
driver->unbind(&udc_controller->gadget);
udc_controller->gadget.dev.driver = NULL;
if (mach->gpio_vbus) {
int value = gpio_get_value(mach->gpio_vbus);
- return mach->gpio_vbus_inverted ? !value : value;
+
+ if (mach->gpio_vbus_inverted)
+ return !value;
+ else
+ return !!value;
}
if (mach->udc_is_connected)
return mach->udc_is_connected();
struct pxa25x_udc *udc;
udc = container_of(_gadget, struct pxa25x_udc, gadget);
- udc->vbus = (is_active != 0);
+ udc->vbus = is_active;
DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
pullup(udc);
return 0;
static irqreturn_t udc_vbus_irq(int irq, void *_dev)
{
struct pxa25x_udc *dev = _dev;
- int vbus = gpio_get_value(dev->mach->gpio_vbus);
- if (dev->mach->gpio_vbus_inverted)
- vbus = !vbus;
-
- pxa25x_udc_vbus_session(&dev->gadget, vbus);
+ pxa25x_udc_vbus_session(&dev->gadget, is_vbus_present());
return IRQ_HANDLED;
}
}
break;
case PCI_VENDOR_ID_ATI:
- /* SB700 old version has a bug in EHCI controller,
+ /* SB600 and old version of SB700 have a bug in EHCI controller,
* which causes usb devices lose response in some cases.
*/
- if (pdev->device == 0x4396) {
+ if ((pdev->device == 0x4386) || (pdev->device == 0x4396)) {
p_smbus = pci_get_device(PCI_VENDOR_ID_ATI,
PCI_DEVICE_ID_ATI_SBX00_SMBUS,
NULL);
if (!p_smbus)
break;
rev = p_smbus->revision;
- if ((rev == 0x3a) || (rev == 0x3b)) {
+ if ((pdev->device == 0x4386) || (rev == 0x3a)
+ || (rev == 0x3b)) {
u8 tmp;
+ ehci_info(ehci, "applying AMD SB600/SB700 USB "
+ "freeze workaround\n");
pci_read_config_byte(pdev, 0x53, &tmp);
pci_write_config_byte(pdev, 0x53, tmp | (1<<3));
}
* the async ring; just the I/O watchdog. Note that if a
* SHRINK were pending, OFF would never be requested.
*/
- enum ehci_timer_action oldactions = ehci->actions;
+ if (timer_pending(&ehci->watchdog)
+ && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
+ & ehci->actions))
+ return;
if (!test_and_set_bit (action, &ehci->actions)) {
unsigned long t;
- if (timer_pending(&ehci->watchdog)
- && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
- & oldactions))
- return;
-
switch (action) {
case TIMER_IO_WATCHDOG:
t = EHCI_IO_JIFFIES;
t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1;
break;
}
- mod_timer(&ehci->watchdog, round_jiffies(t + jiffies));
+ mod_timer(&ehci->watchdog, t + jiffies);
}
}
err("no more memory");
goto reset_open_count;
}
+ kref_init(&tty->kref);
termios = kzalloc(sizeof(*termios), GFP_KERNEL);
if (!termios) {
retval = -ENOMEM;
#define ONDA_VENDOR_ID 0x19d2
#define ONDA_PRODUCT_MSA501HS 0x0001
#define ONDA_PRODUCT_ET502HS 0x0002
+#define ONDA_PRODUCT_MT503HS 0x0200
#define BANDRICH_VENDOR_ID 0x1A8D
#define BANDRICH_PRODUCT_C100_1 0x1002
{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0003) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0004) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0005) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0006) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0007) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0008) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0009) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000a) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000b) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000c) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000d) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000e) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000f) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0010) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0011) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0012) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0013) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0014) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0015) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0016) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0017) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0018) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0019) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0020) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0021) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0022) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0023) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0024) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0025) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0026) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0027) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0028) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0029) },
+ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MT503HS) },
{ USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
#endif
+/* Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
+ * Obviously the PROM has not been customized by the VAR;
+ * the Vendor and Product string descriptors are:
+ * Generic Mass Storage (PROTOTYPE--Remember to change idVendor)
+ * Generic Manufacturer (PROTOTYPE--Remember to change idVendor)
+ */
+UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000,
+ "Mitac",
+ "GPS",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
/*
* This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.)
* Reported by Pete Zaitcev <zaitcev@redhat.com>
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
+/* Reported by Tobias Kunze Briseno <t-linux@fictive.com> */
+UNUSUAL_DEV( 0x04b0, 0x0403, 0x0200, 0x0200,
+ "NIKON",
+ "NIKON DSC D2H",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
/* Reported by Milinevsky Dmitry <niam.niam@gmail.com> */
UNUSUAL_DEV( 0x04b0, 0x0409, 0x0100, 0x0100,
"NIKON",
objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
-objs-y$(CONFIG_MACH_SX1) += lcd_sx1.o
omapfb-objs := $(objs-yy)
+++ /dev/null
-/*
- * LCD panel support for the Siemens SX1 mobile phone
- *
- * Current version : Vovan888@gmail.com, great help from FCA00000
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <mach/gpio.h>
-#include <mach/omapfb.h>
-#include <mach/mcbsp.h>
-#include <mach/mux.h>
-
-/*
- * OMAP310 GPIO registers
- */
-#define GPIO_DATA_INPUT 0xfffce000
-#define GPIO_DATA_OUTPUT 0xfffce004
-#define GPIO_DIR_CONTROL 0xfffce008
-#define GPIO_INT_CONTROL 0xfffce00c
-#define GPIO_INT_MASK 0xfffce010
-#define GPIO_INT_STATUS 0xfffce014
-#define GPIO_PIN_CONTROL 0xfffce018
-
-
-#define A_LCD_SSC_RD 3
-#define A_LCD_SSC_SD 7
-#define _A_LCD_RESET 9
-#define _A_LCD_SSC_CS 12
-#define _A_LCD_SSC_A0 13
-
-#define DSP_REG 0xE1017024
-
-const unsigned char INIT_1[12] = {
- 0x1C, 0x02, 0x88, 0x00, 0x1E, 0xE0, 0x00, 0xDC, 0x00, 0x02, 0x00
-};
-
-const unsigned char INIT_2[127] = {
- 0x15, 0x00, 0x29, 0x00, 0x3E, 0x00, 0x51, 0x00,
- 0x65, 0x00, 0x7A, 0x00, 0x8D, 0x00, 0xA1, 0x00,
- 0xB6, 0x00, 0xC7, 0x00, 0xD8, 0x00, 0xEB, 0x00,
- 0xFB, 0x00, 0x0B, 0x01, 0x1B, 0x01, 0x27, 0x01,
- 0x34, 0x01, 0x41, 0x01, 0x4C, 0x01, 0x55, 0x01,
- 0x5F, 0x01, 0x68, 0x01, 0x70, 0x01, 0x78, 0x01,
- 0x7E, 0x01, 0x86, 0x01, 0x8C, 0x01, 0x94, 0x01,
- 0x9B, 0x01, 0xA1, 0x01, 0xA4, 0x01, 0xA9, 0x01,
- 0xAD, 0x01, 0xB2, 0x01, 0xB7, 0x01, 0xBC, 0x01,
- 0xC0, 0x01, 0xC4, 0x01, 0xC8, 0x01, 0xCB, 0x01,
- 0xCF, 0x01, 0xD2, 0x01, 0xD5, 0x01, 0xD8, 0x01,
- 0xDB, 0x01, 0xE0, 0x01, 0xE3, 0x01, 0xE6, 0x01,
- 0xE8, 0x01, 0xEB, 0x01, 0xEE, 0x01, 0xF1, 0x01,
- 0xF3, 0x01, 0xF8, 0x01, 0xF9, 0x01, 0xFC, 0x01,
- 0x00, 0x02, 0x03, 0x02, 0x07, 0x02, 0x09, 0x02,
- 0x0E, 0x02, 0x13, 0x02, 0x1C, 0x02, 0x00
-};
-
-const unsigned char INIT_3[15] = {
- 0x14, 0x26, 0x33, 0x3D, 0x45, 0x4D, 0x53, 0x59,
- 0x5E, 0x63, 0x67, 0x6D, 0x71, 0x78, 0xFF
-};
-
-static void epson_sendbyte(int flag, unsigned char byte)
-{
- int i, shifter = 0x80;
-
- if (!flag)
- gpio_set_value(_A_LCD_SSC_A0, 0);
- mdelay(2);
- gpio_set_value(A_LCD_SSC_RD, 1);
-
- gpio_set_value(A_LCD_SSC_SD, flag);
-
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
- for (i = 0; i < 8; i++) {
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
- gpio_set_value(A_LCD_SSC_SD, shifter & byte);
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
- shifter >>= 1;
- }
- gpio_set_value(_A_LCD_SSC_A0, 1);
-}
-
-static void init_system(void)
-{
- omap_mcbsp_request(OMAP_MCBSP3);
- omap_mcbsp_stop(OMAP_MCBSP3);
-}
-
-static void setup_GPIO(void)
-{
- /* new wave */
- gpio_request(A_LCD_SSC_RD, "lcd_ssc_rd");
- gpio_request(A_LCD_SSC_SD, "lcd_ssc_sd");
- gpio_request(_A_LCD_RESET, "lcd_reset");
- gpio_request(_A_LCD_SSC_CS, "lcd_ssc_cs");
- gpio_request(_A_LCD_SSC_A0, "lcd_ssc_a0");
-
- /* set GPIOs to output, with initial data */
- gpio_direction_output(A_LCD_SSC_RD, 1);
- gpio_direction_output(A_LCD_SSC_SD, 0);
- gpio_direction_output(_A_LCD_RESET, 0);
- gpio_direction_output(_A_LCD_SSC_CS, 1);
- gpio_direction_output(_A_LCD_SSC_A0, 1);
-}
-
-static void display_init(void)
-{
- int i;
-
- omap_cfg_reg(MCBSP3_CLKX);
-
- mdelay(2);
- setup_GPIO();
- mdelay(2);
-
- /* reset LCD */
- gpio_set_value(A_LCD_SSC_SD, 1);
- epson_sendbyte(0, 0x25);
-
- gpio_set_value(_A_LCD_RESET, 0);
- mdelay(10);
- gpio_set_value(_A_LCD_RESET, 1);
-
- gpio_set_value(_A_LCD_SSC_CS, 1);
- mdelay(2);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD, phase 1 */
- epson_sendbyte(0, 0xCA);
- for (i = 0; i < 10; i++)
- epson_sendbyte(1, INIT_1[i]);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 2 */
- epson_sendbyte(0, 0xCB);
- for (i = 0; i < 125; i++)
- epson_sendbyte(1, INIT_2[i]);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 2a */
- epson_sendbyte(0, 0xCC);
- for (i = 0; i < 14; i++)
- epson_sendbyte(1, INIT_3[i]);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 3 */
- epson_sendbyte(0, 0xBC);
- epson_sendbyte(1, 0x08);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 4 */
- epson_sendbyte(0, 0x07);
- epson_sendbyte(1, 0x05);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 5 */
- epson_sendbyte(0, 0x94);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 6 */
- epson_sendbyte(0, 0xC6);
- epson_sendbyte(1, 0x80);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- mdelay(100); /* used to be 1000 */
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 7 */
- epson_sendbyte(0, 0x16);
- epson_sendbyte(1, 0x02);
- epson_sendbyte(1, 0x00);
- epson_sendbyte(1, 0xB1);
- epson_sendbyte(1, 0x00);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 8 */
- epson_sendbyte(0, 0x76);
- epson_sendbyte(1, 0x00);
- epson_sendbyte(1, 0x00);
- epson_sendbyte(1, 0xDB);
- epson_sendbyte(1, 0x00);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 9 */
- epson_sendbyte(0, 0xAF);
- gpio_set_value(_A_LCD_SSC_CS, 1);
-}
-
-static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
-{
- return 0;
-}
-
-static void sx1_panel_cleanup(struct lcd_panel *panel)
-{
-}
-
-static void sx1_panel_disable(struct lcd_panel *panel)
-{
- printk(KERN_INFO "SX1: LCD panel disable\n");
- sx1_setmmipower(0);
- gpio_set_value(_A_LCD_SSC_CS, 1);
-
- epson_sendbyte(0, 0x25);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- epson_sendbyte(0, 0xAE);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- mdelay(100);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- epson_sendbyte(0, 0x95);
- gpio_set_value(_A_LCD_SSC_CS, 1);
-}
-
-static int sx1_panel_enable(struct lcd_panel *panel)
-{
- printk(KERN_INFO "lcd_sx1: LCD panel enable\n");
- init_system();
- display_init();
-
- sx1_setmmipower(1);
- sx1_setbacklight(0x18);
- sx1_setkeylight (0x06);
- return 0;
-}
-
-
-static unsigned long sx1_panel_get_caps(struct lcd_panel *panel)
-{
- return 0;
-}
-
-struct lcd_panel sx1_panel = {
- .name = "sx1",
- .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
- OMAP_LCDC_INV_HSYNC | OMAP_LCDC_INV_PIX_CLOCK |
- OMAP_LCDC_INV_OUTPUT_EN,
-
- .x_res = 176,
- .y_res = 220,
- .data_lines = 16,
- .bpp = 16,
- .hsw = 5,
- .hfp = 5,
- .hbp = 5,
- .vsw = 2,
- .vfp = 1,
- .vbp = 1,
- .pixel_clock = 1500,
-
- .init = sx1_panel_init,
- .cleanup = sx1_panel_cleanup,
- .enable = sx1_panel_enable,
- .disable = sx1_panel_disable,
- .get_caps = sx1_panel_get_caps,
-};
-
-static int sx1_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&sx1_panel);
- return 0;
-}
-
-static int sx1_panel_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
-static int sx1_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
-{
- return 0;
-}
-
-static int sx1_panel_resume(struct platform_device *pdev)
-{
- return 0;
-}
-
-struct platform_driver sx1_panel_driver = {
- .probe = sx1_panel_probe,
- .remove = sx1_panel_remove,
- .suspend = sx1_panel_suspend,
- .resume = sx1_panel_resume,
- .driver = {
- .name = "lcd_sx1",
- .owner = THIS_MODULE,
- },
-};
-
-static int sx1_panel_drv_init(void)
-{
- return platform_driver_register(&sx1_panel_driver);
-}
-
-static void sx1_panel_drv_cleanup(void)
-{
- platform_driver_unregister(&sx1_panel_driver);
-}
-
-module_init(sx1_panel_drv_init);
-module_exit(sx1_panel_drv_cleanup);
{ "" }
};
-static struct xenbus_driver xenfb = {
+static struct xenbus_driver xenfb_driver = {
.name = "vfb",
.owner = THIS_MODULE,
.ids = xenfb_ids,
if (xen_initial_domain())
return -ENODEV;
- return xenbus_register_frontend(&xenfb);
+ return xenbus_register_frontend(&xenfb_driver);
}
static void __exit xenfb_cleanup(void)
{
- xenbus_unregister_driver(&xenfb);
+ xenbus_unregister_driver(&xenfb_driver);
}
module_init(xenfb_init);
/* Put a banner in the log (for DEBUG) */
dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs);
- dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n",
- (void*)drvdata->fb_phys, drvdata->fb_virt, fbsize);
+ dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
+ (unsigned long long) drvdata->fb_phys, drvdata->fb_virt,
+ fbsize);
return 0; /* success */
config W1_MASTER_DS1WM
tristate "Maxim DS1WM 1-wire busmaster"
- depends on W1 && ARM
+ depends on W1 && ARM && HAVE_CLK
help
Say Y here to enable the DS1WM 1-wire driver, such as that
in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
spin_unlock(&buffer_mapping->private_lock);
}
}
+EXPORT_SYMBOL(invalidate_inode_buffers);
/*
* Remove any clean buffers from the inode's buffer list. This is called
cFYI(1, ("write_end for page %p from pos %lld with %d bytes",
page, pos, copied));
- if (!PageUptodate(page) && copied == PAGE_CACHE_SIZE)
+ if (PageChecked(page)) {
+ if (copied == len)
+ SetPageUptodate(page);
+ ClearPageChecked(page);
+ } else if (!PageUptodate(page) && copied == PAGE_CACHE_SIZE)
SetPageUptodate(page);
if (!PageUptodate(page)) {
{
pgoff_t index = pos >> PAGE_CACHE_SHIFT;
loff_t offset = pos & (PAGE_CACHE_SIZE - 1);
+ loff_t page_start = pos & PAGE_MASK;
+ loff_t i_size;
+ struct page *page;
+ int rc = 0;
cFYI(1, ("write_begin from %lld len %d", (long long)pos, len));
- *pagep = __grab_cache_page(mapping, index);
- if (!*pagep)
- return -ENOMEM;
-
- if (PageUptodate(*pagep))
- return 0;
+ page = __grab_cache_page(mapping, index);
+ if (!page) {
+ rc = -ENOMEM;
+ goto out;
+ }
- /* If we are writing a full page it will be up to date,
- no need to read from the server */
- if (len == PAGE_CACHE_SIZE && flags & AOP_FLAG_UNINTERRUPTIBLE)
- return 0;
+ if (PageUptodate(page))
+ goto out;
- if ((file->f_flags & O_ACCMODE) != O_WRONLY) {
- int rc;
+ /*
+ * If we write a full page it will be up to date, no need to read from
+ * the server. If the write is short, we'll end up doing a sync write
+ * instead.
+ */
+ if (len == PAGE_CACHE_SIZE)
+ goto out;
- /* might as well read a page, it is fast enough */
- rc = cifs_readpage_worker(file, *pagep, &offset);
+ /*
+ * optimize away the read when we have an oplock, and we're not
+ * expecting to use any of the data we'd be reading in. That
+ * is, when the page lies beyond the EOF, or straddles the EOF
+ * and the write will cover all of the existing data.
+ */
+ if (CIFS_I(mapping->host)->clientCanCacheRead) {
+ i_size = i_size_read(mapping->host);
+ if (page_start >= i_size ||
+ (offset == 0 && (pos + len) >= i_size)) {
+ zero_user_segments(page, 0, offset,
+ offset + len,
+ PAGE_CACHE_SIZE);
+ /*
+ * PageChecked means that the parts of the page
+ * to which we're not writing are considered up
+ * to date. Once the data is copied to the
+ * page, it can be set uptodate.
+ */
+ SetPageChecked(page);
+ goto out;
+ }
+ }
- /* we do not need to pass errors back
- e.g. if we do not have read access to the file
- because cifs_write_end will attempt synchronous writes
- -- shaggy */
+ if ((file->f_flags & O_ACCMODE) != O_WRONLY) {
+ /*
+ * might as well read a page, it is fast enough. If we get
+ * an error, we don't need to return it. cifs_write_end will
+ * do a sync write instead since PG_uptodate isn't set.
+ */
+ cifs_readpage_worker(file, page, &page_start);
} else {
/* we could try using another file handle if there is one -
but how would we lock it to prevent close of that handle
racing with this read? In any case
this will be written out by write_end so is fine */
}
-
- return 0;
+out:
+ *pagep = page;
+ return rc;
}
const struct address_space_operations cifs_addr_ops = {
udf_truncate_tail_extent(inode);
unlock_kernel();
write_inode_now(inode, 0);
+ invalidate_inode_buffers(inode);
}
iinfo = UDF_I(inode);
kfree(iinfo->i_ext.i_data);
{.info = {"_BFS", 1, 0}},
{.info = {"_BIF", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER,
9,
- ACPI_RTYPE_STRING, 4, 0}}, /* fixed (9 Int),(4 Str) */
+ ACPI_RTYPE_STRING | ACPI_RTYPE_BUFFER, 4, 0}}, /* fixed (9 Int),(4 Str) */
{.info = {"_BLT", 3, 0}},
{.info = {"_BMC", 1, 0}},
{.info = {"_BMD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}}, /* fixed (5 Int) */
/* Acpi 1.0 defined _WAK with no return value. Later, it was changed to return a package */
- {.info = {"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_PACKAGE}},
+ {.info = {"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}},
{.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 2, 0, 0, 0}}, /* fixed (2 Int), but is optional */
{.ret_info = {0, 0, 0, 0, 0, 0}} /* Table terminator */
};
extern void drm_handle_vblank(struct drm_device *dev, int crtc);
extern int drm_vblank_get(struct drm_device *dev, int crtc);
extern void drm_vblank_put(struct drm_device *dev, int crtc);
+extern void drm_vblank_cleanup(struct drm_device *dev);
/* Modesetting support */
extern int drm_modeset_ctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
compat_long_t request,
compat_ulong_t addr, compat_ulong_t data);
-#ifdef __ARCH_WANT_COMPAT_SYS_PTRACE
extern long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
compat_ulong_t addr, compat_ulong_t data);
asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid,
compat_long_t addr, compat_long_t data);
-#endif /* __ARCH_WANT_COMPAT_SYS_PTRACE */
/*
* epoll (fs/eventpoll.c) compat bits follow ...
#endif /* CONFIG_HIGHMEM */
/* when CONFIG_HIGHMEM is not set these will be plain clear/copy_page */
+#ifndef clear_user_highpage
static inline void clear_user_highpage(struct page *page, unsigned long vaddr)
{
void *addr = kmap_atomic(page, KM_USER0);
clear_user_page(addr, vaddr, page);
kunmap_atomic(addr, KM_USER0);
}
+#endif
#ifndef __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
/**
#define IRQ_MOVE_PENDING 0x00200000 /* need to re-target IRQ destination */
#define IRQ_NO_BALANCING 0x00400000 /* IRQ is excluded from balancing */
#define IRQ_SPURIOUS_DISABLED 0x00800000 /* IRQ was disabled by the spurious trap */
-#define IRQ_MOVE_PCNTXT 0x01000000 /* IRQ migration from process context */
+#define IRQ_MOVE_PCNTXT 0x01000000 /* IRQ migration from process context */
+#define IRQ_AFFINITY_SET 0x02000000 /* IRQ affinity was set from userspace*/
#ifdef CONFIG_IRQ_PER_CPU
# define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
/**
* struct irq_desc - interrupt descriptor
- *
+ * @irq: interrupt number for this descriptor
* @handle_irq: highlevel irq-events handler [if NULL, __do_IRQ()]
* @chip: low level interrupt hardware access
* @msi_desc: MSI descriptor
* @cpu: cpu index useful for balancing
* @pending_mask: pending rebalanced interrupts
* @dir: /proc/irq/ procfs entry
- * @affinity_entry: /proc/irq/smp_affinity procfs entry on SMP
* @name: flow handler name for /proc/interrupts output
*/
struct irq_desc {
#ifdef CONFIG_GENERIC_PENDING_IRQ
-void set_pending_irq(unsigned int irq, cpumask_t mask);
void move_native_irq(int irq);
void move_masked_irq(int irq);
{
}
-static inline void set_pending_irq(unsigned int irq, cpumask_t mask)
-{
-}
-
#endif /* CONFIG_GENERIC_PENDING_IRQ */
#else /* CONFIG_SMP */
#ifdef CONFIG_MEMORY_HOTPLUG
#define hotplug_memory_notifier(fn, pri) { \
- static struct notifier_block fn##_mem_nb = \
+ static __meminitdata struct notifier_block fn##_mem_nb =\
{ .notifier_call = fn, .priority = pri }; \
register_memory_notifier(&fn##_mem_nb); \
}
struct list_head lru; /* per cgroup LRU list */
};
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat);
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat);
void __init page_cgroup_init(void);
struct page_cgroup *lookup_page_cgroup(struct page *page);
#else /* CONFIG_CGROUP_MEM_RES_CTLR */
struct page_cgroup;
-static inline void pgdat_page_cgroup_init(struct pglist_data *pgdat)
+static inline void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
{
}
* It must be called by the arch code on the new cpu, before the new cpu
* enables interrupts and before the "boot" cpu returns from __cpu_up().
*/
-void notify_cpu_starting(unsigned int cpu)
+void __cpuinit notify_cpu_starting(unsigned int cpu)
{
unsigned long val = CPU_STARTING;
int i, j, k; /* indices for partition finding loops */
cpumask_t *doms; /* resulting partition; i.e. sched domains */
struct sched_domain_attr *dattr; /* attributes for custom domains */
- int ndoms; /* number of sched domains in result */
+ int ndoms = 0; /* number of sched domains in result */
int nslot; /* next empty doms[] cpumask_t slot */
doms = NULL;
struct irqaction *action) { }
#endif
+extern int irq_select_affinity_usr(unsigned int irq);
+
/*
* Debugging printout:
*/
int irq_set_affinity(unsigned int irq, cpumask_t cpumask)
{
struct irq_desc *desc = irq_to_desc(irq);
+ unsigned long flags;
if (!desc->chip->set_affinity)
return -EINVAL;
+ spin_lock_irqsave(&desc->lock, flags);
+
#ifdef CONFIG_GENERIC_PENDING_IRQ
if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) {
- unsigned long flags;
-
- spin_lock_irqsave(&desc->lock, flags);
desc->affinity = cpumask;
desc->chip->set_affinity(irq, cpumask);
- spin_unlock_irqrestore(&desc->lock, flags);
- } else
- set_pending_irq(irq, cpumask);
+ } else {
+ desc->status |= IRQ_MOVE_PENDING;
+ desc->pending_mask = cpumask;
+ }
#else
desc->affinity = cpumask;
desc->chip->set_affinity(irq, cpumask);
#endif
+ desc->status |= IRQ_AFFINITY_SET;
+ spin_unlock_irqrestore(&desc->lock, flags);
return 0;
}
/*
* Generic version of the affinity autoselector.
*/
-int irq_select_affinity(unsigned int irq)
+int do_irq_select_affinity(unsigned int irq, struct irq_desc *desc)
{
cpumask_t mask;
- struct irq_desc *desc;
if (!irq_can_set_affinity(irq))
return 0;
cpus_and(mask, cpu_online_map, irq_default_affinity);
- desc = irq_to_desc(irq);
+ /*
+ * Preserve an userspace affinity setup, but make sure that
+ * one of the targets is online.
+ */
+ if (desc->status & (IRQ_AFFINITY_SET | IRQ_NO_BALANCING)) {
+ if (cpus_intersects(desc->affinity, cpu_online_map))
+ mask = desc->affinity;
+ else
+ desc->status &= ~IRQ_AFFINITY_SET;
+ }
+
desc->affinity = mask;
desc->chip->set_affinity(irq, mask);
return 0;
}
+#else
+static inline int do_irq_select_affinity(unsigned int irq, struct irq_desc *d)
+{
+ return irq_select_affinity(irq);
+}
#endif
+/*
+ * Called when affinity is set via /proc/irq
+ */
+int irq_select_affinity_usr(unsigned int irq)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ ret = do_irq_select_affinity(irq, desc);
+ spin_unlock_irqrestore(&desc->lock, flags);
+
+ return ret;
+}
+
+#else
+static inline int do_irq_select_affinity(int irq, struct irq_desc *desc)
+{
+ return 0;
+}
#endif
/**
* IRQF_TRIGGER_* but the PIC does not support multiple
* flow-types?
*/
- pr_warning("No set_type function for IRQ %d (%s)\n", irq,
+ pr_debug("No set_type function for IRQ %d (%s)\n", irq,
chip ? (chip->name ? : "unknown") : "unknown");
return 0;
}
/* Undo nested disables: */
desc->depth = 1;
+ /* Exclude IRQ from balancing if requested */
+ if (new->flags & IRQF_NOBALANCING)
+ desc->status |= IRQ_NO_BALANCING;
+
/* Set default affinity mask once everything is setup */
- irq_select_affinity(irq);
+ do_irq_select_affinity(irq, desc);
} else if ((new->flags & IRQF_TRIGGER_MASK)
&& (new->flags & IRQF_TRIGGER_MASK)
*p = new;
- /* Exclude IRQ from balancing */
- if (new->flags & IRQF_NOBALANCING)
- desc->status |= IRQ_NO_BALANCING;
-
/* Reset broken irq detection when installing new handler */
desc->irq_count = 0;
desc->irqs_unhandled = 0;
#include <linux/irq.h>
-void set_pending_irq(unsigned int irq, cpumask_t mask)
-{
- struct irq_desc *desc = irq_to_desc(irq);
- unsigned long flags;
-
- spin_lock_irqsave(&desc->lock, flags);
- desc->status |= IRQ_MOVE_PENDING;
- desc->pending_mask = mask;
- spin_unlock_irqrestore(&desc->lock, flags);
-}
-
void move_masked_irq(int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
if (!cpus_intersects(new_value, cpu_online_map))
/* Special case for empty set - allow the architecture
code to set default SMP affinity. */
- return irq_select_affinity(irq) ? -EINVAL : count;
+ return irq_select_affinity_usr(irq) ? -EINVAL : count;
irq_set_affinity(irq, new_value);
{
printk("Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar\n");
- printk("... MAX_LOCKDEP_SUBCLASSES: %lu\n", MAX_LOCKDEP_SUBCLASSES);
+ printk("... MAX_LOCKDEP_SUBCLASSES: %lu\n", MAX_LOCKDEP_SUBCLASSES);
printk("... MAX_LOCK_DEPTH: %lu\n", MAX_LOCK_DEPTH);
printk("... MAX_LOCKDEP_KEYS: %lu\n", MAX_LOCKDEP_KEYS);
- printk("... CLASSHASH_SIZE: %lu\n", CLASSHASH_SIZE);
+ printk("... CLASSHASH_SIZE: %lu\n", CLASSHASH_SIZE);
printk("... MAX_LOCKDEP_ENTRIES: %lu\n", MAX_LOCKDEP_ENTRIES);
printk("... MAX_LOCKDEP_CHAINS: %lu\n", MAX_LOCKDEP_CHAINS);
printk("... CHAINHASH_SIZE: %lu\n", CHAINHASH_SIZE);
put_cpu();
}
-static int __devinit profile_cpu_callback(struct notifier_block *info,
+static int __cpuinit profile_cpu_callback(struct notifier_block *info,
unsigned long action, void *__cpu)
{
int node, cpu = (unsigned long)__cpu;
#define create_hash_tables() ({ 0; })
#endif
-int create_proc_profile(void)
+int __ref create_proc_profile(void) /* false positive from hotcpu_notifier */
{
struct proc_dir_entry *entry;
return (copied == sizeof(data)) ? 0 : -EIO;
}
-#if defined CONFIG_COMPAT && defined __ARCH_WANT_COMPAT_SYS_PTRACE
+#if defined CONFIG_COMPAT
#include <linux/compat.h>
int compat_ptrace_request(struct task_struct *child, compat_long_t request,
unlock_kernel();
return ret;
}
-#endif /* CONFIG_COMPAT && __ARCH_WANT_COMPAT_SYS_PTRACE */
+#endif /* CONFIG_COMPAT */
static unsigned long cpu_avg_load_per_task(int cpu)
{
struct rq *rq = cpu_rq(cpu);
+ unsigned long nr_running = ACCESS_ONCE(rq->nr_running);
- if (rq->nr_running)
- rq->avg_load_per_task = rq->load.weight / rq->nr_running;
+ if (nr_running)
+ rq->avg_load_per_task = rq->load.weight / nr_running;
else
rq->avg_load_per_task = 0;
out:
if (resched)
- preempt_enable_notrace();
+ preempt_enable_no_resched_notrace();
else
preempt_enable_notrace();
return NULL;
static struct trace_array *mmio_trace_array;
static bool overrun_detected;
+static unsigned long prev_overruns;
static void mmio_reset_data(struct trace_array *tr)
{
int cpu;
overrun_detected = false;
+ prev_overruns = 0;
tr->time_start = ftrace_now(tr->cpu);
for_each_online_cpu(cpu)
static unsigned long count_overruns(struct trace_iterator *iter)
{
- int cpu;
unsigned long cnt = 0;
-/* FIXME: */
-#if 0
- for_each_online_cpu(cpu) {
- cnt += iter->overrun[cpu];
- iter->overrun[cpu] = 0;
- }
-#endif
- (void)cpu;
+ unsigned long over = ring_buffer_overruns(iter->tr->buffer);
+
+ if (over > prev_overruns)
+ cnt = over - prev_overruns;
+ prev_overruns = over;
return cnt;
}
static void *
t_next(struct seq_file *m, void *v, loff_t *pos)
{
- long i = (long)m->private;
+ long i;
(*pos)++;
- i++;
+ if (v == SEQ_START_TOKEN)
+ i = 0;
+ else {
+ i = *(long *)v;
+ i++;
+ }
if (i >= max_stack_trace.nr_entries ||
stack_dump_trace[i] == ULONG_MAX)
static void *t_start(struct seq_file *m, loff_t *pos)
{
- void *t = &m->private;
+ void *t = SEQ_START_TOKEN;
loff_t l = 0;
local_irq_disable();
__raw_spin_lock(&max_stack_lock);
+ if (*pos == 0)
+ return SEQ_START_TOKEN;
+
for (; t && l < *pos; t = t_next(m, t, &l))
;
static int t_show(struct seq_file *m, void *v)
{
- long i = *(long *)v;
+ long i;
int size;
- if (i < 0) {
+ if (v == SEQ_START_TOKEN) {
seq_printf(m, " Depth Size Location"
" (%d entries)\n"
" ----- ---- --------\n",
return 0;
}
+ i = *(long *)v;
+
if (i >= max_stack_trace.nr_entries ||
stack_dump_trace[i] == ULONG_MAX)
return 0;
int ret;
ret = seq_open(file, &stack_trace_seq_ops);
- if (!ret) {
- struct seq_file *m = file->private_data;
- m->private = (void *)-1;
- }
return ret;
}
pgdat->node_start_pfn;
}
-static int __add_zone(struct zone *zone, unsigned long phys_start_pfn)
+static int __meminit __add_zone(struct zone *zone, unsigned long phys_start_pfn)
{
struct pglist_data *pgdat = zone->zone_pgdat;
int nr_pages = PAGES_PER_SECTION;
return 0;
}
-static int __add_section(struct zone *zone, unsigned long phys_start_pfn)
+static int __meminit __add_section(struct zone *zone, unsigned long phys_start_pfn)
{
int nr_pages = PAGES_PER_SECTION;
int ret;
* call this function after deciding the zone to which to
* add the new pages.
*/
-int __add_pages(struct zone *zone, unsigned long phys_start_pfn,
+int __ref __add_pages(struct zone *zone, unsigned long phys_start_pfn,
unsigned long nr_pages)
{
unsigned long i;
}
-int add_memory(int nid, u64 start, u64 size)
+/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
+int __ref add_memory(int nid, u64 start, u64 size)
{
pg_data_t *pgdat = NULL;
int new_pgdat = 0;
#if !defined(CONFIG_SPARSEMEM)
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat)
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
{
pgdat->node_page_cgroup = NULL;
}
return section->page_cgroup + pfn;
}
-int __meminit init_section_page_cgroup(unsigned long pfn)
+/* __alloc_bootmem...() is protected by !slab_available() */
+int __init_refok init_section_page_cgroup(unsigned long pfn)
{
struct mem_section *section;
struct page_cgroup *base, *pc;
}
}
-int online_page_cgroup(unsigned long start_pfn,
+int __meminit online_page_cgroup(unsigned long start_pfn,
unsigned long nr_pages,
int nid)
{
return -ENOMEM;
}
-int offline_page_cgroup(unsigned long start_pfn,
+int __meminit offline_page_cgroup(unsigned long start_pfn,
unsigned long nr_pages, int nid)
{
unsigned long start, end, pfn;
}
-static int page_cgroup_callback(struct notifier_block *self,
+static int __meminit page_cgroup_callback(struct notifier_block *self,
unsigned long action, void *arg)
{
struct memory_notify *mn = arg;
" want\n");
}
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat)
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
{
return;
}
* set. If this is <=0, then that means that the passed-in
* map was not consumed and must be freed.
*/
-int sparse_add_one_section(struct zone *zone, unsigned long start_pfn,
+int __meminit sparse_add_one_section(struct zone *zone, unsigned long start_pfn,
int nr_pages)
{
unsigned long section_nr = pfn_to_section_nr(start_pfn);
list_add(&page->lru, &l_inactive);
}
+ spin_lock_irq(&zone->lru_lock);
/*
* Count referenced pages from currently used mappings as
* rotated, even though they are moved to the inactive list.
pgmoved = 0;
lru = LRU_BASE + file * LRU_FILE;
- spin_lock_irq(&zone->lru_lock);
while (!list_empty(&l_inactive)) {
page = lru_to_page(&l_inactive);
prefetchw_prev_lru_page(page, &l_inactive, flags);
{
hda_nid_t *d;
- snd_hda_codec_write(codec, nid, 0, verb, val);
+ snd_hda_codec_write_cache(codec, nid, 0, verb, val);
d = codec->slave_dig_outs;
if (!d)
return;
for (; *d; d++)
- snd_hda_codec_write(codec, *d, 0, verb, val);
+ snd_hda_codec_write_cache(codec, *d, 0, verb, val);
}
static inline void set_dig_out_convert(struct hda_codec *codec, hda_nid_t nid,
enum {
STAC_92HD73XX_REF,
- STAC_DELL_M6,
+ STAC_DELL_M6_AMIC,
+ STAC_DELL_M6_DMIC,
+ STAC_DELL_M6_BOTH,
STAC_DELL_EQ,
STAC_92HD73XX_MODELS
};
STAC_92HD71BXX_REF,
STAC_DELL_M4_1,
STAC_DELL_M4_2,
+ STAC_DELL_M4_3,
STAC_HP_M4,
STAC_92HD71BXX_MODELS
};
unsigned int num_mixers;
int board_config;
+ unsigned int eapd_switch: 1;
unsigned int surr_switch: 1;
unsigned int line_switch: 1;
unsigned int mic_switch: 1;
static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = {
[STAC_92HD73XX_REF] = ref92hd73xx_pin_configs,
- [STAC_DELL_M6] = dell_m6_pin_configs,
+ [STAC_DELL_M6_AMIC] = dell_m6_pin_configs,
+ [STAC_DELL_M6_DMIC] = dell_m6_pin_configs,
+ [STAC_DELL_M6_BOTH] = dell_m6_pin_configs,
[STAC_DELL_EQ] = dell_m6_pin_configs,
};
static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = {
[STAC_92HD73XX_REF] = "ref",
- [STAC_DELL_M6] = "dell-m6",
+ [STAC_DELL_M6_AMIC] = "dell-m6-amic",
+ [STAC_DELL_M6_DMIC] = "dell-m6-dmic",
+ [STAC_DELL_M6_BOTH] = "dell-m6",
[STAC_DELL_EQ] = "dell-eq",
};
SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
"DFI LanParty", STAC_92HD73XX_REF),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0254,
- "unknown Dell", STAC_DELL_M6),
+ "Dell Studio 1535", STAC_DELL_M6_DMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0255,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_DMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0256,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_BOTH),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0257,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_BOTH),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x025e,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_AMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x025f,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_AMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0271,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_DMIC),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0272,
+ "unknown Dell", STAC_DELL_M6_DMIC),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x029f,
+ "Dell Studio 1537", STAC_DELL_M6_DMIC),
{} /* terminator */
};
0x40f000f0, 0x044413b0, 0x044413b0,
};
+static unsigned int dell_m4_3_pin_configs[11] = {
+ 0x0421101f, 0x04a11221, 0x90a70330, 0x90170110,
+ 0x40f000f0, 0x40f000f0, 0x40f000f0, 0x90a000f0,
+ 0x40f000f0, 0x044413b0, 0x044413b0,
+};
+
static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = {
[STAC_92HD71BXX_REF] = ref92hd71bxx_pin_configs,
[STAC_DELL_M4_1] = dell_m4_1_pin_configs,
[STAC_DELL_M4_2] = dell_m4_2_pin_configs,
+ [STAC_DELL_M4_3] = dell_m4_3_pin_configs,
[STAC_HP_M4] = NULL,
};
[STAC_92HD71BXX_REF] = "ref",
[STAC_DELL_M4_1] = "dell-m4-1",
[STAC_DELL_M4_2] = "dell-m4-2",
+ [STAC_DELL_M4_3] = "dell-m4-3",
[STAC_HP_M4] = "hp-m4",
};
"unknown Dell", STAC_DELL_M4_2),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0264,
"unknown Dell", STAC_DELL_M4_2),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02aa,
+ "unknown Dell", STAC_DELL_M4_3),
{} /* terminator */
};
cfg->hp_outs && !spec->multiout.hp_nid)
spec->multiout.hp_nid = nid;
- if (cfg->hp_outs > 1) {
+ if (cfg->hp_outs > 1 && cfg->line_out_type == AUTO_PIN_LINE_OUT) {
err = stac92xx_add_control(spec,
STAC_CTL_WIDGET_HP_SWITCH,
"Headphone as Line Out Switch",
AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
}
+static void stac_toggle_power_map(struct hda_codec *codec, hda_nid_t nid,
+ int enable);
+
static int stac92xx_init(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
+ unsigned int gpio;
int i;
snd_hda_sequence_write(codec, spec->init);
snd_hda_codec_write_cache(codec,
spec->adc_nids[i], 0,
AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+
+ /* set up GPIO */
+ gpio = spec->gpio_data;
+ /* turn on EAPD statically when spec->eapd_switch isn't set.
+ * otherwise, unsol event will turn it on/off dynamically
+ */
+ if (!spec->eapd_switch)
+ gpio |= spec->eapd_mask;
+ stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, gpio);
+
/* set up pins */
if (spec->hp_detect) {
/* Enable unsolicited responses on the HP widget */
for (i = 0; i < spec->num_dmics; i++)
stac92xx_auto_set_pinctl(codec, spec->dmic_nids[i],
AC_PINCTL_IN_EN);
+ if (cfg->dig_out_pin)
+ stac92xx_auto_set_pinctl(codec, cfg->dig_out_pin,
+ AC_PINCTL_OUT_EN);
+ if (cfg->dig_in_pin)
+ stac92xx_auto_set_pinctl(codec, cfg->dig_in_pin,
+ AC_PINCTL_IN_EN);
for (i = 0; i < spec->num_pwrs; i++) {
- int event = is_nid_hp_pin(cfg, spec->pwr_nids[i])
- ? STAC_HP_EVENT : STAC_PWR_EVENT;
- int pinctl = snd_hda_codec_read(codec, spec->pwr_nids[i],
- 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
- int def_conf = snd_hda_codec_read(codec, spec->pwr_nids[i],
- 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
- def_conf = get_defcfg_connect(def_conf);
+ hda_nid_t nid = spec->pwr_nids[i];
+ int pinctl, def_conf;
+ int event = STAC_PWR_EVENT;
+
+ if (is_nid_hp_pin(cfg, nid) && spec->hp_detect)
+ continue; /* already has an unsol event */
+
+ pinctl = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
/* outputs are only ports capable of power management
* any attempts on powering down a input port cause the
* referenced VREF to act quirky.
*/
if (pinctl & AC_PINCTL_IN_EN)
continue;
+ def_conf = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_CONFIG_DEFAULT, 0);
+ def_conf = get_defcfg_connect(def_conf);
/* skip any ports that don't have jacks since presence
* detection is useless */
- if (def_conf && def_conf != AC_JACK_PORT_FIXED)
+ if (def_conf != AC_JACK_PORT_COMPLEX) {
+ if (def_conf != AC_JACK_PORT_NONE)
+ stac_toggle_power_map(codec, nid, 1);
continue;
+ }
enable_pin_detect(codec, spec->pwr_nids[i], event | i);
codec->patch_ops.unsol_event(codec, (event | i) << 26);
}
if (spec->dac_list)
stac92xx_power_down(codec);
- if (cfg->dig_out_pin)
- stac92xx_auto_set_pinctl(codec, cfg->dig_out_pin,
- AC_PINCTL_OUT_EN);
- if (cfg->dig_in_pin)
- stac92xx_auto_set_pinctl(codec, cfg->dig_in_pin,
- AC_PINCTL_IN_EN);
-
- stac_gpio_set(codec, spec->gpio_mask,
- spec->gpio_dir, spec->gpio_data);
-
return 0;
}
for (i = 0; i < cfg->speaker_outs; i++)
stac92xx_reset_pinctl(codec, cfg->speaker_pins[i],
AC_PINCTL_OUT_EN);
- if (spec->eapd_mask)
+ if (spec->eapd_mask && spec->eapd_switch)
stac_gpio_set(codec, spec->gpio_mask,
spec->gpio_dir, spec->gpio_data &
~spec->eapd_mask);
for (i = 0; i < cfg->speaker_outs; i++)
stac92xx_set_pinctl(codec, cfg->speaker_pins[i],
AC_PINCTL_OUT_EN);
- if (spec->eapd_mask)
+ if (spec->eapd_mask && spec->eapd_switch)
stac_gpio_set(codec, spec->gpio_mask,
spec->gpio_dir, spec->gpio_data |
spec->eapd_mask);
}
}
-static void stac92xx_pin_sense(struct hda_codec *codec, int idx)
+static void stac_toggle_power_map(struct hda_codec *codec, hda_nid_t nid,
+ int enable)
{
struct sigmatel_spec *spec = codec->spec;
- hda_nid_t nid = spec->pwr_nids[idx];
- int presence, val;
- val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0)
- & 0x000000ff;
- presence = get_hp_pin_presence(codec, nid);
+ unsigned int idx, val;
+
+ for (idx = 0; idx < spec->num_pwrs; idx++) {
+ if (spec->pwr_nids[idx] == nid)
+ break;
+ }
+ if (idx >= spec->num_pwrs)
+ return;
/* several codecs have two power down bits */
if (spec->pwr_mapping)
else
idx = 1 << idx;
- if (presence)
+ val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0) & 0xff;
+ if (enable)
val &= ~idx;
else
val |= idx;
/* power down unused output ports */
snd_hda_codec_write(codec, codec->afg, 0, 0x7ec, val);
-};
+}
+
+static void stac92xx_pin_sense(struct hda_codec *codec, hda_nid_t nid)
+{
+ stac_toggle_power_map(codec, nid, get_hp_pin_presence(codec, nid));
+}
static void stac92xx_unsol_event(struct hda_codec *codec, unsigned int res)
{
case STAC_DELL_EQ:
spec->init = dell_eq_core_init;
/* fallthru */
- case STAC_DELL_M6:
+ case STAC_DELL_M6_AMIC:
+ case STAC_DELL_M6_DMIC:
+ case STAC_DELL_M6_BOTH:
spec->num_smuxes = 0;
spec->mixer = &stac92hd73xx_6ch_mixer[DELL_M6_MIXER];
spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP];
+ spec->eapd_switch = 0;
spec->num_amps = 1;
if (!spec->init)
spec->init = dell_m6_core_init;
- switch (codec->subsystem_id) {
- case 0x1028025e: /* Analog Mics */
- case 0x1028025f:
+ switch (spec->board_config) {
+ case STAC_DELL_M6_AMIC: /* Analog Mics */
stac92xx_set_config_reg(codec, 0x0b, 0x90A70170);
spec->num_dmics = 0;
spec->private_dimux.num_items = 1;
break;
- case 0x10280271: /* Digital Mics */
- case 0x10280272:
- case 0x10280254:
- case 0x10280255:
+ case STAC_DELL_M6_DMIC: /* Digital Mics */
stac92xx_set_config_reg(codec, 0x13, 0x90A60160);
spec->num_dmics = 1;
spec->private_dimux.num_items = 2;
break;
- case 0x10280256: /* Both */
- case 0x10280057:
+ case STAC_DELL_M6_BOTH: /* Both */
stac92xx_set_config_reg(codec, 0x0b, 0x90A70170);
stac92xx_set_config_reg(codec, 0x13, 0x90A60160);
spec->num_dmics = 1;
default:
spec->num_dmics = STAC92HD73XX_NUM_DMICS;
spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids);
+ spec->eapd_switch = 1;
}
if (spec->board_config > STAC_92HD73XX_REF) {
/* GPIO0 High = Enable EAPD */
static int stac92hd71xx_suspend(struct hda_codec *codec, pm_message_t state)
{
+ struct sigmatel_spec *spec = codec->spec;
+
stac92hd71xx_set_power_state(codec, AC_PWRST_D3);
+ if (spec->eapd_mask)
+ stac_gpio_set(codec, spec->gpio_mask,
+ spec->gpio_dir, spec->gpio_data &
+ ~spec->eapd_mask);
return 0;
};
switch (spec->board_config) {
case STAC_HP_M4:
- spec->num_dmics = 0;
- spec->num_smuxes = 0;
- spec->num_dmuxes = 0;
-
/* enable internal microphone */
stac92xx_set_config_reg(codec, 0x0e, 0x01813040);
stac92xx_auto_set_pinctl(codec, 0x0e,
AC_PINCTL_IN_EN | AC_PINCTL_VREF_80);
+ /* fallthru */
+ case STAC_DELL_M4_2:
+ spec->num_dmics = 0;
+ spec->num_smuxes = 0;
+ spec->num_dmuxes = 0;
+ break;
+ case STAC_DELL_M4_1:
+ case STAC_DELL_M4_3:
+ spec->num_dmics = 1;
+ spec->num_smuxes = 0;
+ spec->num_dmuxes = 0;
break;
default:
spec->num_dmics = STAC92HD71BXX_NUM_DMICS;
spec->num_pwrs = 0;
spec->aloopback_mask = 0x40;
spec->aloopback_shift = 0;
+ spec->eapd_switch = 1;
err = stac92xx_parse_auto_config(codec, 0x1e, 0x20);
if (!err) {
spec->aloopback_mask = 0x40;
spec->aloopback_shift = 0;
+ spec->eapd_switch = 1;
spec->multiout.dac_nids = spec->dac_nids;
switch (spec->board_config){
config SND_SOC_MPC5200_I2S
tristate "Freescale MPC5200 PSC in I2S mode driver"
+ depends on SND_SOC && PPC_MPC52xx && PPC_BESTCOMM
select SND_SOC_OF_SIMPLE
- depends on SND_SOC && PPC_MPC52xx
+ select PPC_BESTCOMM_GEN_BD
help
Say Y here to support the MPC5200 PSCs in I2S mode.
void unregister_sound_midi(int unit)
{
- return sound_remove_unit(&chains[2], unit);
+ sound_remove_unit(&chains[2], unit);
}
EXPORT_SYMBOL(unregister_sound_midi);
void unregister_sound_dsp(int unit)
{
- return sound_remove_unit(&chains[3], unit);
+ sound_remove_unit(&chains[3], unit);
}
return NULL;
}
-int soundcore_open(struct inode *inode, struct file *file)
+static int soundcore_open(struct inode *inode, struct file *file)
{
int chain;
int unit = iminor(inode);
projects / linux-2.6-omap-h63xx.git / commitdiff