#if defined(CONFIG_OMAP_STI)
-#define OMAP1_STI_BASE IO_ADDRESS(0xfffea000)
+#define OMAP1_STI_BASE 0xfffea000
#define OMAP1_STI_CHANNEL_BASE (OMAP1_STI_BASE + 0x400)
static struct resource sti_resources[] = {
/* The maximum error between a target DPLL rate and the rounded rate in Hz */
#define DEFAULT_DPLL_RATE_TOLERANCE 50000
+int omap2_clk_init(void);
int omap2_clk_enable(struct clk *clk);
void omap2_clk_disable(struct clk *clk);
long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
#include <mach/board.h>
#include <mach/mux.h>
#include <mach/gpio.h>
-
-#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-
-#define OMAP2_I2C_BASE2 0x48072000
-#define OMAP2_I2C_INT2 57
-
-static struct resource i2c_resources2[] = {
- {
- .start = OMAP2_I2C_BASE2,
- .end = OMAP2_I2C_BASE2 + 0x3f,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = OMAP2_I2C_INT2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device omap_i2c_device2 = {
- .name = "i2c_omap",
- .id = 2,
- .num_resources = ARRAY_SIZE(i2c_resources2),
- .resource = i2c_resources2,
-};
-
-/* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */
-static void omap_init_i2c(void)
-{
- /* REVISIT: Second I2C not in use on H4? */
- if (machine_is_omap_h4())
- return;
-
- if (!cpu_is_omap2430()) {
- omap_cfg_reg(J15_24XX_I2C2_SCL);
- omap_cfg_reg(H19_24XX_I2C2_SDA);
- }
- (void) platform_device_register(&omap_i2c_device2);
-}
-
-#else
-
-static void omap_init_i2c(void) {}
-
-#endif
+#include <mach/eac.h>
#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
#define OMAP2_MBOX_BASE IO_ADDRESS(OMAP24XX_MAILBOX_BASE)
#if defined(CONFIG_OMAP_STI)
-#define OMAP2_STI_BASE IO_ADDRESS(0x48068000)
+#if defined(CONFIG_ARCH_OMAP2)
+
+#define OMAP2_STI_BASE 0x48068000
#define OMAP2_STI_CHANNEL_BASE 0x54000000
#define OMAP2_STI_IRQ 4
.flags = IORESOURCE_IRQ,
}
};
+#elif defined(CONFIG_ARCH_OMAP3)
+
+#define OMAP3_SDTI_BASE 0x54500000
+#define OMAP3_SDTI_CHANNEL_BASE 0x54600000
+
+static struct resource sti_resources[] = {
+ {
+ .start = OMAP3_SDTI_BASE,
+ .end = OMAP3_SDTI_BASE + 0xFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = OMAP3_SDTI_CHANNEL_BASE,
+ .end = OMAP3_SDTI_CHANNEL_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+#endif
static struct platform_device sti_device = {
.name = "sti",
static inline void omap_init_sti(void) {}
#endif
-#if defined(CONFIG_SPI_OMAP24XX)
+#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
#include <mach/mcspi.h>
#define OMAP2_MCSPI1_BASE 0x48098000
#define OMAP2_MCSPI2_BASE 0x4809a000
+#define OMAP2_MCSPI3_BASE 0x480b8000
+#define OMAP2_MCSPI4_BASE 0x480ba000
static struct omap2_mcspi_platform_config omap2_mcspi1_config = {
.num_cs = 4,
},
};
-struct platform_device omap2_mcspi1 = {
+static struct platform_device omap2_mcspi1 = {
.name = "omap2_mcspi",
.id = 1,
.num_resources = ARRAY_SIZE(omap2_mcspi1_resources),
},
};
-struct platform_device omap2_mcspi2 = {
+static struct platform_device omap2_mcspi2 = {
.name = "omap2_mcspi",
.id = 2,
.num_resources = ARRAY_SIZE(omap2_mcspi2_resources),
},
};
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+static struct omap2_mcspi_platform_config omap2_mcspi3_config = {
+ .num_cs = 2,
+};
+
+static struct resource omap2_mcspi3_resources[] = {
+ {
+ .start = OMAP2_MCSPI3_BASE,
+ .end = OMAP2_MCSPI3_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap2_mcspi3 = {
+ .name = "omap2_mcspi",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(omap2_mcspi3_resources),
+ .resource = omap2_mcspi3_resources,
+ .dev = {
+ .platform_data = &omap2_mcspi3_config,
+ },
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct omap2_mcspi_platform_config omap2_mcspi4_config = {
+ .num_cs = 1,
+};
+
+static struct resource omap2_mcspi4_resources[] = {
+ {
+ .start = OMAP2_MCSPI4_BASE,
+ .end = OMAP2_MCSPI4_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap2_mcspi4 = {
+ .name = "omap2_mcspi",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(omap2_mcspi4_resources),
+ .resource = omap2_mcspi4_resources,
+ .dev = {
+ .platform_data = &omap2_mcspi4_config,
+ },
+};
+#endif
+
static void omap_init_mcspi(void)
{
platform_device_register(&omap2_mcspi1);
platform_device_register(&omap2_mcspi2);
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+ platform_device_register(&omap2_mcspi3);
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+ platform_device_register(&omap2_mcspi4);
+#endif
}
#else
static inline void omap_init_mcspi(void) {}
#endif
+#ifdef CONFIG_SND_OMAP24XX_EAC
+
+#define OMAP2_EAC_BASE 0x48090000
+
+static struct resource omap2_eac_resources[] = {
+ {
+ .start = OMAP2_EAC_BASE,
+ .end = OMAP2_EAC_BASE + 0x109,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap2_eac_device = {
+ .name = "omap24xx-eac",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(omap2_eac_resources),
+ .resource = omap2_eac_resources,
+ .dev = {
+ .platform_data = NULL,
+ },
+};
+
+void omap_init_eac(struct eac_platform_data *pdata)
+{
+ omap2_eac_device.dev.platform_data = pdata;
+ platform_device_register(&omap2_eac_device);
+}
+
+#else
+void omap_init_eac(struct eac_platform_data *pdata) {}
+#endif
+
+#ifdef CONFIG_OMAP_SHA1_MD5
+static struct resource sha1_md5_resources[] = {
+ {
+ .start = OMAP24XX_SEC_SHA1MD5_BASE,
+ .end = OMAP24XX_SEC_SHA1MD5_BASE + 0x64,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_24XX_SHA1MD5,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device sha1_md5_device = {
+ .name = "OMAP SHA1/MD5",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(sha1_md5_resources),
+ .resource = sha1_md5_resources,
+};
+
+static void omap_init_sha1_md5(void)
+{
+ platform_device_register(&sha1_md5_device);
+}
+#else
+static inline void omap_init_sha1_md5(void) { }
+#endif
+
+#if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE)
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#define OMAP_HDQ_BASE 0x480B2000
+#endif
+static struct resource omap_hdq_resources[] = {
+ {
+ .start = OMAP_HDQ_BASE,
+ .end = OMAP_HDQ_BASE + 0x1C,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_24XX_HDQ_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+static struct platform_device omap_hdq_dev = {
+ .name = "omap_hdq",
+ .id = 0,
+ .dev = {
+ .platform_data = NULL,
+ },
+ .num_resources = ARRAY_SIZE(omap_hdq_resources),
+ .resource = omap_hdq_resources,
+};
+static inline void omap_hdq_init(void)
+{
+ (void) platform_device_register(&omap_hdq_dev);
+}
+#else
+static inline void omap_hdq_init(void) {}
+#endif
+
/*-------------------------------------------------------------------------*/
static int __init omap2_init_devices(void)
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
- omap_init_i2c();
omap_init_mbox();
omap_init_mcspi();
+ omap_hdq_init();
omap_init_sti();
+ omap_init_sha1_md5();
return 0;
}
#include <asm/mach-types.h>
#include <mach/gpmc.h>
-#include "memory.h"
+#include <mach/sdrc.h>
/* GPMC register offsets */
#define GPMC_REVISION 0x00
* OMAP2 I/O mapping code
*
* Copyright (C) 2005 Nokia Corporation
- * Author: Juha Yrjölä <juha.yrjola@nokia.com>
- * Updated map desc to add 2430 support : <x0khasim@ti.com>
+ * Copyright (C) 2007 Texas Instruments
+ *
+ * Author:
+ * Juha Yrjola <juha.yrjola@nokia.com>
+ * Syed Khasim <x0khasim@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <mach/mux.h>
#include <mach/omapfb.h>
+#include <mach/sram.h>
+
+#include "memory.h"
+
+#include "clock.h"
#include <mach/powerdomain.h>
#include <mach/clockdomain.h>
#include "clockdomains.h"
-extern void omap_sram_init(void);
-extern int omap2_clk_init(void);
-extern void omap2_check_revision(void);
-extern void omap2_init_memory(void);
-extern void gpmc_init(void);
-extern void omapfb_reserve_sdram(void);
-
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
} __attribute__ ((aligned(4))) irq_banks[] = {
{
/* MPU INTC */
- .base_reg = IO_ADDRESS(OMAP24XX_IC_BASE),
+ .base_reg = 0,
.nr_irqs = 96,
- }, {
- /* XXX: DSP INTC */
- }
+ },
};
/* XXX: FIQ and additional INTC support (only MPU at the moment) */
for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
struct omap_irq_bank *bank = irq_banks + i;
- /* XXX */
- if (!bank->base_reg)
- continue;
-
+ if (cpu_is_omap24xx())
+ bank->base_reg = IO_ADDRESS(OMAP24XX_IC_BASE);
omap_irq_bank_init_one(bank);
nr_irqs += bank->nr_irqs;
* published by the Free Software Foundation.
*/
+#ifndef ARCH_ARM_MACH_OMAP2_MEMORY_H
+#define ARCH_ARM_MACH_OMAP2_MEMORY_H
+
/* Memory timings */
#define M_DDR 1
#define M_LOCK_CTRL (1 << 2)
extern u32 omap2_memory_get_type(void);
u32 omap2_dll_force_needed(void);
u32 omap2_reprogram_sdrc(u32 level, u32 force);
+void __init omap2_init_memory(void);
+void __init gpmc_init(void);
+
+#endif
#include <asm/mach/map.h>
#include <mach/tc.h>
+#include <mach/control.h>
#include <mach/board.h>
#include <mach/mux.h>
#include <mach/gpio.h>
#include <mach/menelaus.h>
#include <mach/mcbsp.h>
+#include <mach/dsp_common.h>
#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
-#include "../plat-omap/dsp/dsp_common.h"
-
static struct dsp_platform_data dsp_pdata = {
.kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list),
};
{
static DEFINE_MUTEX(dsp_pdata_lock);
- mutex_init(&kdev->lock);
+ spin_lock_init(&kdev->lock);
mutex_lock(&dsp_pdata_lock);
list_add_tail(&kdev->entry, &dsp_pdata.kdev_list);
*/
static int __init omap_init_devices(void)
{
-/*
- * Need to enable relevant once for 2430 SDP
- */
-#ifndef CONFIG_MACH_OMAP_2430SDP
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
omap_init_uwire();
omap_init_wdt();
omap_init_rng();
-#endif
return 0;
}
arch_initcall(omap_init_devices);
#define __ASM_ARCH_OMAP_2430SDP_H
/* Placeholder for 2430SDP specific defines */
-#define OMAP24XX_ETHR_START 0x08000300
+#define OMAP24XX_ETHR_START 0x08000300
#define OMAP24XX_ETHR_GPIO_IRQ 149
#define SDP2430_CS0_BASE 0x04000000
-#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ
+/* Function prototypes */
+extern void sdp2430_flash_init(void);
+extern void sdp2430_usb_init(void);
#endif /* __ASM_ARCH_OMAP_2430SDP_H */
extern void apollon_mmc_init(void);
+static inline int apollon_plus(void)
+{
+ /* The apollon plus has IDCODE revision 5 */
+ return system_rev & 0xc0;
+}
+
/* Placeholder for APOLLON specific defines */
#define APOLLON_ETHR_GPIO_IRQ 74
/*
* arch/arm/plat-omap/include/mach/board-h4.h
*
- * Hardware definitions for TI OMAP1610 H4 board.
+ * Hardware definitions for TI OMAP2420 H4 board.
*
* Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
*
#ifndef __ASM_ARCH_OMAP_H4_H
#define __ASM_ARCH_OMAP_H4_H
+/* MMC Prototypes */
+extern void h4_mmc_init(void);
+
/* Placeholder for H4 specific defines */
#define OMAP24XX_ETHR_GPIO_IRQ 92
#endif /* __ASM_ARCH_OMAP_H4_H */
unsigned cover:1;
/* 4 wire signaling is optional, and is only used for SD/SDIO */
unsigned wire4:1;
+ /* use the internal clock */
+ unsigned internal_clock:1;
s16 power_pin;
s16 switch_pin;
s16 wp_pin;
-#ifndef __ASM_ARCH_CONTROL_H
-#define __ASM_ARCH_CONTROL_H
-
/*
* arch/arm/plat-omap/include/mach/control.h
*
* OMAP2/3 System Control Module definitions
*
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
*
* Written by Paul Walmsley
*
* the Free Software Foundation.
*/
+#ifndef __ASM_ARCH_CONTROL_H
+#define __ASM_ARCH_CONTROL_H
+
#include <mach/io.h>
+#ifndef __ASSEMBLY__
#define OMAP242X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
#define OMAP243X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#else
+#define OMAP242X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#endif /* __ASSEMBLY__ */
/*
* As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc)
#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4)
/*
* REVISIT: This list of registers is not comprehensive - there are more
extern void omap_set_gpio_direction(int gpio, int is_input);
extern void omap_set_gpio_dataout(int gpio, int enable);
extern int omap_get_gpio_datain(int gpio);
+extern void omap2_gpio_prepare_for_retention(void);
+extern void omap2_gpio_resume_after_retention(void);
extern void omap_set_gpio_debounce(int gpio, int enable);
extern void omap_set_gpio_debounce_time(int gpio, int enable);
#define GPMC_CS_NAND_ADDRESS 0x20
#define GPMC_CS_NAND_DATA 0x24
+#define GPMC_CONFIG 0x50
+#define GPMC_STATUS 0x54
+
#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29)
#include "omap730.h"
#include "omap1510.h"
-#include "omap24xx.h"
#include "omap16xx.h"
+#include "omap24xx.h"
#include "omap34xx.h"
#ifndef __ASSEMBLER__
#define INT_UART2 (15 + IH2_BASE)
#define INT_BT_MCSI1TX (16 + IH2_BASE)
#define INT_BT_MCSI1RX (17 + IH2_BASE)
+#define INT_SOSSI_MATCH (19 + IH2_BASE)
#define INT_USB_W2FC (20 + IH2_BASE)
#define INT_1WIRE (21 + IH2_BASE)
#define INT_OS_TIMER (22 + IH2_BASE)
#define INT_1610_DMA_CH14 (61 + IH2_BASE)
#define INT_1610_DMA_CH15 (62 + IH2_BASE)
#define INT_1610_NAND (63 + IH2_BASE)
+#define INT_1610_SHA1MD5 (91 + IH2_BASE)
/*
* OMAP-730 specific IRQ numbers for interrupt handler 2
#define INT_24XX_GPTIMER10 46
#define INT_24XX_GPTIMER11 47
#define INT_24XX_GPTIMER12 48
+#define INT_24XX_SHA1MD5 51
#define INT_24XX_I2C1_IRQ 56
#define INT_24XX_I2C2_IRQ 57
+#define INT_24XX_HDQ_IRQ 58
#define INT_24XX_MCBSP1_IRQ_TX 59
#define INT_24XX_MCBSP1_IRQ_RX 60
#define INT_24XX_MCBSP2_IRQ_TX 62
#define INT_24XX_MCBSP2_IRQ_RX 63
+#define INT_24XX_SPI1_IRQ 65
+#define INT_24XX_SPI2_IRQ 66
#define INT_24XX_UART1_IRQ 72
#define INT_24XX_UART2_IRQ 73
#define INT_24XX_UART3_IRQ 74
#define OMAP1510_DSPREG_SIZE SZ_128K
#define OMAP1510_DSPREG_START 0xE1000000
+#define OMAP1510_DSP_MMU_BASE (0xfffed200)
+
#endif /* __ASM_ARCH_OMAP15XX_H */
#define OMAP16XX_DSPREG_SIZE SZ_128K
#define OMAP16XX_DSPREG_START 0xE1000000
+#define OMAP16XX_SEC_BASE 0xFFFE4000
+#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000)
+#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800)
+#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000)
+
/*
* ---------------------------------------------------------------------------
* Interrupts
#define WSPR_DISABLE_0 (0x0000aaaa)
#define WSPR_DISABLE_1 (0x00005555)
-/* Mailbox */
+#define OMAP16XX_DSP_MMU_BASE (0xfffed200)
#define OMAP16XX_MAILBOX_BASE (0xfffcf000)
#endif /* __ASM_ARCH_OMAP16XX_H */
#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000
#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000
#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000
+#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000
#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000
/* Values from DSP must map to lower 16-bits */
int screen_width,
int pos_x, int pos_y, int width,
int height, int color_mode);
+ int (*set_rotate) (int angle);
int (*setup_mem) (int plane, size_t size,
int mem_type, unsigned long *paddr);
int (*mmap) (struct fb_info *info,
extern struct lcd_ctrl omap2_disp_ctrl;
#endif
+extern void omapfb_reserve_sdram(void);
extern void omapfb_register_panel(struct lcd_panel *panel);
extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
extern void omapfb_notify_clients(struct omapfb_device *fbdev,
#define SDRC_DLLB_STATUS 0x06C
#define SDRC_POWER 0x070
#define SDRC_MR_0 0x084
+#define SDRC_ACTIM_CTRL_A 0x09c
+#define SDRC_ACTIM_CTRL_B 0x0a0
#define SDRC_RFR_CTRL_0 0x0a4
/*
projects / linux-2.6-omap-h63xx.git / commitdiff