D: Fixed the shm swap deallocation at swapoff time (try_to_unuse message)
D: VM hacker
D: Various other kernel hacks
-S: Via Cicalini 26
S: Imola 40026
S: Italy
S: England
N: Chris Wright
-E: chrisw@osdl.org
+E: chrisw@sous-sol.org
D: hacking on LSM framework and security modules.
-S: c/o OSDL
-S: 12725 SW Millikan Way, Suite 400
-S: Beaverton, OR 97005
+S: Portland, OR
S: USA
N: Michal Wronski
Copyright (C) 2004 BULL SA.
Written by Simon.Derr@bull.net
-Portions Copyright (c) 2004 Silicon Graphics, Inc.
+Portions Copyright (c) 2004-2006 Silicon Graphics, Inc.
Modified by Paul Jackson <pj@sgi.com>
+Modified by Christoph Lameter <clameter@sgi.com>
CONTENTS:
=========
These subsets, or "soft partitions" must be able to be dynamically
adjusted, as the job mix changes, without impacting other concurrently
-executing jobs.
+executing jobs. The location of the running jobs pages may also be moved
+when the memory locations are changed.
The kernel cpuset patch provides the minimum essential kernel
mechanisms required to efficiently implement such subsets. It
1.3 How are cpusets implemented ?
---------------------------------
-Cpusets provide a Linux kernel (2.6.7 and above) mechanism to constrain
-which CPUs and Memory Nodes are used by a process or set of processes.
+Cpusets provide a Linux kernel mechanism to constrain which CPUs and
+Memory Nodes are used by a process or set of processes.
The Linux kernel already has a pair of mechanisms to specify on which
CPUs a task may be scheduled (sched_setaffinity) and on which Memory
If the cpuset flag file 'memory_migrate' is set true, then when
tasks are attached to that cpuset, any pages that task had
allocated to it on nodes in its previous cpuset are migrated
-to the tasks new cpuset. Depending on the implementation,
-this migration may either be done by swapping the page out,
-so that the next time the page is referenced, it will be paged
-into the tasks new cpuset, usually on the node where it was
-referenced, or this migration may be done by directly copying
-the pages from the tasks previous cpuset to the new cpuset,
-where possible to the same node, relative to the new cpuset,
-as the node that held the page, relative to the old cpuset.
+to the tasks new cpuset. The relative placement of the page within
+the cpuset is preserved during these migration operations if possible.
+For example if the page was on the second valid node of the prior cpuset
+then the page will be placed on the second valid node of the new cpuset.
+
Also if 'memory_migrate' is set true, then if that cpusets
'mems' file is modified, pages allocated to tasks in that
cpuset, that were on nodes in the previous setting of 'mems',
-will be moved to nodes in the new setting of 'mems.' Again,
-depending on the implementation, this might be done by swapping,
-or by direct copying. In either case, pages that were not in
-the tasks prior cpuset, or in the cpusets prior 'mems' setting,
-will not be moved.
+will be moved to nodes in the new setting of 'mems.'
+Pages that were not in the tasks prior cpuset, or in the cpusets
+prior 'mems' setting, will not be moved.
There is an exception to the above. If hotplug functionality is used
to remove all the CPUs that are currently assigned to a cpuset,
# The next line should display '/Charlie'
cat /proc/self/cpuset
-In the case that a change of cpuset includes wanting to move already
-allocated memory pages, consider further the work of IWAMOTO
-Toshihiro <iwamoto@valinux.co.jp> for page remapping and memory
-hotremoval, which can be found at:
-
- http://people.valinux.co.jp/~iwamoto/mh.html
-
-The integration of cpusets with such memory migration is not yet
-available.
-
In the future, a C library interface to cpusets will likely be
available. For now, the only way to query or modify cpusets is
via the cpuset file system, using the various cd, mkdir, echo, cat,
If you have problems with this please do ask on the mailing list.
--
-Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham
+Authors: Richard Walker,
+ Jamie Honan,
+ Michael Hunold,
+ Manu Abraham,
+ Michael Krufky
when a file system has been mounted or unmounted. Userspace should
poll the /proc/mounts file instead to detect this properly.
Who: Greg Kroah-Hartman <gregkh@suse.de>
+
+---------------------------
+
+What: Support for NEC DDB5074 and DDB5476 evaluation boards.
+When: June 2006
+Why: Board specific code doesn't build anymore since ~2.6.0 and no
+ users have complained indicating there is no more need for these
+ boards. This should really be considered a last call.
+Who: Ralf Baechle <ralf@linux-mips.org>
timesource is not avalible, it defaults to PIT.
Format: { pit | tsc | cyclone | pmtmr }
+ disable_8254_timer
+ enable_8254_timer
+ [IA32/X86_64] Disable/Enable interrupt 0 timer routing
+ over the 8254 in addition to over the IO-APIC. The
+ kernel tries to set a sensible default.
+
hpet= [IA-32,HPET] option to disable HPET and use PIT.
Format: disable
nomce [IA-32] Machine Check Exception
+ nomca [IA-64] Disable machine check abort handling
+
noresidual [PPC] Don't use residual data on PReP machines.
noresume [SWSUSP] Disables resume and restores original swap
New name for the ramdisk parameter.
See Documentation/ramdisk.txt.
+ rcu.blimit= [KNL,BOOT] Set maximum number of finished
+ RCU callbacks to process in one batch.
+
+ rcu.qhimark= [KNL,BOOT] Set threshold of queued
+ RCU callbacks over which batch limiting is disabled.
+
+ rcu.qlowmark= [KNL,BOOT] Set threshold of queued
+ RCU callbacks below which batch limiting is re-enabled.
+
+ rcu.rsinterval= [KNL,BOOT,SMP] Set the number of additional
+ RCU callbacks to queued before forcing reschedule
+ on all cpus.
+
rdinit= [KNL]
Format: <full_path>
Run specified binary instead of /init from the ramdisk,
12 -> Medion 7134 [16be:0003]
13 -> Typhoon TV+Radio 90031
14 -> ELSA EX-VISION 300TV [1048:226b]
- 15 -> ELSA EX-VISION 500TV [1048:226b]
+ 15 -> ELSA EX-VISION 500TV [1048:226a]
16 -> ASUS TV-FM 7134 [1043:4842,1043:4830,1043:4840]
17 -> AOPEN VA1000 POWER [1131:7133]
18 -> BMK MPEX No Tuner
74 -> LifeView FlyTV Platinum Mini2 [14c0:1212]
75 -> AVerMedia AVerTVHD MCE A180 [1461:1044]
76 -> SKNet MonsterTV Mobile [1131:4ee9]
- 77 -> Pinnacle PCTV 110i (saa7133) [11bd:002e]
+ 77 -> Pinnacle PCTV 40i/50i/110i (saa7133) [11bd:002e]
78 -> ASUSTeK P7131 Dual [1043:4862]
79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)
80 -> ASUS Digimatrix TV [1043:0210]
Page migration allows a process to manually relocate the node on which its
pages are located through the MF_MOVE and MF_MOVE_ALL options while setting
-a new memory policy. The pages of process can also be relocated
+a new memory policy via mbind(). The pages of process can also be relocated
from another process using the sys_migrate_pages() function call. The
migrate_pages function call takes two sets of nodes and moves pages of a
process that are located on the from nodes to the destination nodes.
-
-Manual migration is very useful if for example the scheduler has relocated
+Page migration functions are provided by the numactl package by Andi Kleen
+(a version later than 0.9.3 is required. Get it from
+ftp://ftp.suse.com/pub/people/ak). numactl provided libnuma which
+provides an interface similar to other numa functionality for page migration.
+cat /proc/<pid>/numa_maps allows an easy review of where the pages of
+a process are located. See also the numa_maps manpage in the numactl package.
+
+Manual migration is useful if for example the scheduler has relocated
a process to a processor on a distant node. A batch scheduler or an
administrator may detect the situation and move the pages of the process
nearer to the new processor. At some point in the future we may have
Larger installations usually partition the system using cpusets into
sections of nodes. Paul Jackson has equipped cpusets with the ability to
-move pages when a task is moved to another cpuset. This allows automatic
-control over locality of a process. If a task is moved to a new cpuset
-then also all its pages are moved with it so that the performance of the
-process does not sink dramatically (as is the case today).
+move pages when a task is moved to another cpuset (See ../cpusets.txt).
+Cpusets allows the automation of process locality. If a task is moved to
+a new cpuset then also all its pages are moved with it so that the
+performance of the process does not sink dramatically. Also the pages
+of processes in a cpuset are moved if the allowed memory nodes of a
+cpuset are changed.
Page migration allows the preservation of the relative location of pages
within a group of nodes for all migration techniques which will preserve a
Processes will run with similar performance after migration.
Page migration occurs in several steps. First a high level
-description for those trying to use migrate_pages() and then
-a low level description of how the low level details work.
+description for those trying to use migrate_pages() from the kernel
+(for userspace usage see the Andi Kleen's numactl package mentioned above)
+and then a low level description of how the low level details work.
-A. Use of migrate_pages()
--------------------------
+A. In kernel use of migrate_pages()
+-----------------------------------
1. Remove pages from the LRU.
Lists of pages to be migrated are generated by scanning over
pages and moving them into lists. This is done by
- calling isolate_lru_page() or __isolate_lru_page().
+ calling isolate_lru_page().
Calling isolate_lru_page increases the references to the page
- so that it cannot vanish under us.
+ so that it cannot vanish while the page migration occurs.
+ It also prevents the swapper or other scans to encounter
+ the page.
-2. Generate a list of newly allocates page to move the contents
- of the first list to.
+2. Generate a list of newly allocates page. These pages will contain the
+ contents of the pages from the first list after page migration is
+ complete.
3. The migrate_pages() function is called which attempts
to do the migration. It returns the moved pages in the
4. The leftover pages of various types are returned
to the LRU using putback_to_lru_pages() or otherwise
disposed of. The pages will still have the refcount as
- increased by isolate_lru_pages()!
+ increased by isolate_lru_pages() if putback_to_lru_pages() is not
+ used! The kernel may want to handle the various cases of failures in
+ different ways.
-B. Operation of migrate_pages()
---------------------------------
+B. How migrate_pages() works
+----------------------------
-migrate_pages does several passes over its list of pages. A page is moved
-if all references to a page are removable at the time.
+migrate_pages() does several passes over its list of pages. A page is moved
+if all references to a page are removable at the time. The page has
+already been removed from the LRU via isolate_lru_page() and the refcount
+is increased so that the page cannot be freed while page migration occurs.
Steps:
3. Make sure that the page has assigned swap cache entry if
it is an anonyous page. The swap cache reference is necessary
- to preserve the information contain in the page table maps.
+ to preserve the information contain in the page table maps while
+ page migration occurs.
4. Prep the new page that we want to move to. It is locked
and set to not being uptodate so that all accesses to the new
- page immediately lock while we are moving references.
+ page immediately lock while the move is in progress.
-5. All the page table references to the page are either dropped (file backed)
- or converted to swap references (anonymous pages). This should decrease the
- reference count.
+5. All the page table references to the page are either dropped (file
+ backed pages) or converted to swap references (anonymous pages).
+ This should decrease the reference count.
-6. The radix tree lock is taken
+6. The radix tree lock is taken. This will cause all processes trying
+ to reestablish a pte to block on the radix tree spinlock.
7. The refcount of the page is examined and we back out if references remain
otherwise we know that we are the only one referencing this page.
8. The radix tree is checked and if it does not contain the pointer to this
- page then we back out.
+ page then we back out because someone else modified the mapping first.
9. The mapping is checked. If the mapping is gone then a truncate action may
be in progress and we back out.
-10. The new page is prepped with some settings from the old page so that accesses
- to the new page will be discovered to have the correct settings.
+10. The new page is prepped with some settings from the old page so that
+ accesses to the new page will be discovered to have the correct settings.
11. The radix tree is changed to point to the new page.
-12. The reference count of the old page is dropped because the reference has now
- been removed.
+12. The reference count of the old page is dropped because the radix tree
+ reference is gone.
-13. The radix tree lock is dropped.
+13. The radix tree lock is dropped. With that lookups become possible again
+ and other processes will move from spinning on the tree lock to sleeping on
+ the locked new page.
14. The page contents are copied to the new page.
17. Queued up writeback on the new page is triggered.
-18. If swap pte's were generated for the page then remove them again.
+18. If swap pte's were generated for the page then replace them with real
+ ptes. This will reenable access for processes not blocked by the page lock.
+
+19. The page locks are dropped from the old and new page.
+ Processes waiting on the page lock can continue.
+
+20. The new page is moved to the LRU and can be scanned by the swapper
+ etc again.
+
+TODO list
+---------
+
+- Page migration requires the use of swap handles to preserve the
+ information of the anonymous page table entries. This means that swap
+ space is reserved but never used. The maximum number of swap handles used
+ is determined by CHUNK_SIZE (see mm/mempolicy.c) per ongoing migration.
+ Reservation of pages could be avoided by having a special type of swap
+ handle that does not require swap space and that would only track the page
+ references. Something like that was proposed by Marcelo Tosatti in the
+ past (search for migration cache on lkml or linux-mm@kvack.org).
-19. The locks are dropped from the old and new page.
+- Page migration unmaps ptes for file backed pages and requires page
+ faults to reestablish these ptes. This could be optimized by somehow
+ recording the references before migration and then reestablish them later.
+ However, there are several locking challenges that have to be overcome
+ before this is possible.
-20. The new page is moved to the LRU.
+- Page migration generates read ptes for anonymous pages. Dirty page
+ faults are required to make the pages writable again. It may be possible
+ to generate a pte marked dirty if it is known that the page is dirty and
+ that this process has the only reference to that page.
-Christoph Lameter, December 19, 2005.
+Christoph Lameter, March 8, 2006.
DVB SUBSYSTEM AND DRIVERS
P: LinuxTV.org Project
-M: mchehab@infradead.org
M: v4l-dvb-maintainer@linuxtv.org
L: linux-dvb@linuxtv.org (subscription required)
W: http://linuxtv.org/
LINUX SECURITY MODULE (LSM) FRAMEWORK
P: Chris Wright
-M: chrisw@osdl.org
-L: linux-security-module@wirex.com
+M: chrisw@sous-sol.org
+L: linux-security-module@vger.kernel.org
W: http://lsm.immunix.org
T: git kernel.org:/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
S: Supported
M: ralf@linux-mips.org
W: http://www.linux-mips.org/
L: linux-mips@linux-mips.org
-S: Maintained
+T: git www.linux-mips.org:/pub/scm/linux.git
+S: Supported
MISCELLANEOUS MCA-SUPPORT
P: James Bottomley
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 16
-EXTRAVERSION =-rc5
+EXTRAVERSION =
NAME=Sliding Snow Leopard
# *DOCUMENTATION*
)
endef
-include/linux/version.h: $(srctree)/Makefile .config FORCE
+include/linux/version.h: $(srctree)/Makefile .config .kernelrelease FORCE
$(call filechk,version.h)
# ---------------------------------------------------------------------------
}
irq_enter();
+ /*
+ * __do_IRQ() must be called with IPL_MAX. Note that we do not
+ * explicitly enable interrupts afterwards - some MILO PALcode
+ * (namely LX164 one) seems to have severe problems with RTI
+ * at IPL 0.
+ */
local_irq_disable();
__do_IRQ(irq, regs);
- local_irq_enable();
irq_exit();
}
choice
prompt "ARM system type"
- default ARCH_RPC
+ default ARCH_VERSATILE
config ARCH_CLPS7500
bool "Cirrus-CL-PS7500FE"
source "drivers/spi/Kconfig"
+source "drivers/w1/Kconfig"
+
source "drivers/hwmon/Kconfig"
#source "drivers/l3/Kconfig"
}
#endif
+
+#define LCM_ALC_EN 0x8000
+
+void frontlight_set(struct locomo *lchip, int duty, int vr, int bpwf)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&lchip->lock, flags);
+ locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
+ udelay(100);
+ locomo_writel(duty, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD);
+ locomo_writel(bpwf | LCM_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
+ spin_unlock_irqrestore(&lchip->lock, flags);
+}
+
+
/**
* locomo_probe - probe for a single LoCoMo chip.
* @phys_addr: physical address of device.
/* FrontLight */
locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD);
+
+ /* Same constants can be used for collie and poodle
+ (depending on CONFIG options in original sharp code)? */
+ frontlight_set(lchip, 163, 0, 148);
+
/* Longtime timer */
locomo_writel(0, lchip->base + LOCOMO_LTINT);
/* SPI */
DEFINE(TI_TP_VALUE, offsetof(struct thread_info, tp_value));
DEFINE(TI_FPSTATE, offsetof(struct thread_info, fpstate));
DEFINE(TI_VFPSTATE, offsetof(struct thread_info, vfpstate));
- DEFINE(TI_IWMMXT_STATE, (offsetof(struct thread_info, fpstate)+4)&~7);
+#ifdef CONFIG_IWMMXT
+ DEFINE(TI_IWMMXT_STATE, offsetof(struct thread_info, fpstate.iwmmxt));
+#endif
BLANK();
DEFINE(S_R0, offsetof(struct pt_regs, ARM_r0));
DEFINE(S_R1, offsetof(struct pt_regs, ARM_r1));
#include <asm/mach/arch.h>
+#include "compat.h"
+
/*
* Usage:
* - do not go blindly adding fields, add them at the end
--- /dev/null
+/*
+ * linux/arch/arm/kernel/compat.h
+ *
+ * Copyright (C) 2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void convert_to_tag_list(struct tag *tags);
+
+extern void squash_mem_tags(struct tag *tag);
#include <linux/kallsyms.h>
#include <linux/init.h>
#include <linux/cpu.h>
+#include <linux/elfcore.h>
#include <asm/leds.h>
#include <asm/processor.h>
* This is our default idle handler. We need to disable
* interrupts here to ensure we don't miss a wakeup call.
*/
-void default_idle(void)
+static void default_idle(void)
{
if (hlt_counter)
cpu_relax();
static int ptrace_getwmmxregs(struct task_struct *tsk, void __user *ufp)
{
struct thread_info *thread = task_thread_info(tsk);
- void *ptr = &thread->fpstate;
if (!test_ti_thread_flag(thread, TIF_USING_IWMMXT))
return -ENODATA;
iwmmxt_task_disable(thread); /* force it to ram */
- /* The iWMMXt state is stored doubleword-aligned. */
- if (((long) ptr) & 4)
- ptr += 4;
- return copy_to_user(ufp, ptr, 0x98) ? -EFAULT : 0;
+ return copy_to_user(ufp, &thread->fpstate.iwmmxt, IWMMXT_SIZE)
+ ? -EFAULT : 0;
}
/*
static int ptrace_setwmmxregs(struct task_struct *tsk, void __user *ufp)
{
struct thread_info *thread = task_thread_info(tsk);
- void *ptr = &thread->fpstate;
if (!test_ti_thread_flag(thread, TIF_USING_IWMMXT))
return -EACCES;
iwmmxt_task_release(thread); /* force a reload */
- /* The iWMMXt state is stored doubleword-aligned. */
- if (((long) ptr) & 4)
- ptr += 4;
- return copy_from_user(ptr, ufp, 0x98) ? -EFAULT : 0;
+ return copy_from_user(&thread->fpstate.iwmmxt, ufp, IWMMXT_SIZE)
+ ? -EFAULT : 0;
}
#endif
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
+#include "compat.h"
+
#ifndef MEM_SIZE
#define MEM_SIZE (16*1024*1024)
#endif
__setup("fpe=", fpe_setup);
#endif
-extern unsigned int mem_fclk_21285;
extern void paging_init(struct meminfo *, struct machine_desc *desc);
-extern void convert_to_tag_list(struct tag *tags);
-extern void squash_mem_tags(struct tag *tag);
extern void reboot_setup(char *str);
extern int root_mountflags;
extern void _stext, _text, _etext, __data_start, _edata, _end;
mul xh, yl, xh
mla xh, xl, yh, xh
- mov ip, xl, asr #16
- mov yh, yl, asr #16
+ mov ip, xl, lsr #16
+ mov yh, yl, lsr #16
bic xl, xl, ip, lsl #16
bic yl, yl, yh, lsl #16
mla xh, yh, ip, xh
comment "IXP4xx Platforms"
-# This entry is placed on top because otherwise it would have
-# been shown as a submenu.
config MACH_NSLU2
bool
- prompt "NSLU2" if !(MACH_IXDP465 || MACH_IXDPG425 || ARCH_IXDP425 || ARCH_ADI_COYOTE || ARCH_AVILA || ARCH_IXCDP1100 || ARCH_PRPMC1100 || MACH_GTWX5715)
+ prompt "Linksys NSLU2"
help
Say 'Y' here if you want your kernel to support Linksys's
NSLU2 NAS device. For more information on this platform,
static void __exit nas100d_power_exit(void)
{
+ if (!(machine_is_nas100d()))
+ return;
+
free_irq(NAS100D_RB_IRQ, NULL);
}
{
ixp4xx_sys_init();
+ /* gpio 14 and 15 are _not_ clocks */
+ *IXP4XX_GPIO_GPCLKR = 0;
+
nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
nas100d_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
};
+static u64 s3c_device_spi0_dmamask = 0xffffffffUL;
+
struct platform_device s3c_device_spi0 = {
.name = "s3c2410-spi",
.id = 0,
.num_resources = ARRAY_SIZE(s3c_spi0_resource),
.resource = s3c_spi0_resource,
+ .dev = {
+ .dma_mask = &s3c_device_spi0_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
};
EXPORT_SYMBOL(s3c_device_spi0);
};
+static u64 s3c_device_spi1_dmamask = 0xffffffffUL;
+
struct platform_device s3c_device_spi1 = {
.name = "s3c2410-spi",
.id = 1,
.num_resources = ARRAY_SIZE(s3c_spi1_resource),
.resource = s3c_spi1_resource,
+ .dev = {
+ .dma_mask = &s3c_device_spi1_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
};
EXPORT_SYMBOL(s3c_device_spi1);
#ifdef HARVARD_CACHE
bic r0, r0, #CACHE_LINE_SIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D line
- mcr p15, 0, r0, c7, c5, 1 @ invalidate I line
add r0, r0, #CACHE_LINE_SIZE
cmp r0, r1
blo 1b
#endif
- mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB
-#ifdef HARVARD_CACHE
mov r0, #0
+#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
+#else
+ mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB
#endif
mov pc, lr
static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
{
unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
+ const int zero = 0;
set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL));
flush_tlb_kernel_page(to);
asm( "mcrr p15, 0, %1, %0, c14\n"
- " mcrr p15, 0, %1, %0, c5\n"
+ " mcr p15, 0, %2, c7, c10, 4\n"
+ " mcr p15, 0, %2, c7, c5, 0\n"
:
- : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES)
+ : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
: "cc");
}
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
+ mcr p15, 0, r2, c7, c10, 4 @ data synchronization barrier
mov pc, lr
.section ".text.init", #alloc, #execinstr
#include <asm/setup.h>
#include <asm/pgtable.h>
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
asmlinkage void ret_from_fork(void);
/*
obj-y += cpu/
obj-y += timers/
-obj-$(CONFIG_ACPI) += acpi/
+obj-y += acpi/
obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o
obj-$(CONFIG_MCA) += mca.o
obj-$(CONFIG_X86_MSR) += msr.o
-obj-y := boot.o
+obj-$(CONFIG_ACPI) += boot.o
obj-$(CONFIG_X86_IO_APIC) += earlyquirk.o
obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o
extern int gsi_irq_sharing(int gsi);
#include <asm/proto.h>
+static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; }
+
+
#else /* X86 */
#ifdef CONFIG_X86_LOCAL_APIC
disable_acpi();
return error;
}
-#ifdef __i386__
- check_acpi_pci();
-#endif
acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
#include <linux/pci.h>
#include <asm/pci-direct.h>
#include <asm/acpi.h>
+#include <asm/apic.h>
static int __init check_bridge(int vendor, int device)
{
+#ifdef CONFIG_ACPI
/* According to Nvidia all timer overrides are bogus. Just ignore
them all. */
if (vendor == PCI_VENDOR_ID_NVIDIA) {
acpi_skip_timer_override = 1;
}
+#endif
+ if (vendor == PCI_VENDOR_ID_ATI && timer_over_8254 == 1) {
+ timer_over_8254 = 0;
+ printk(KERN_INFO "ATI board detected. Disabling timer routing "
+ "over 8254.\n");
+ }
return 0;
}
*/
void lapic_shutdown(void)
{
+ unsigned long flags;
+
if (!cpu_has_apic)
return;
- local_irq_disable();
+ local_irq_save(flags);
clear_local_APIC();
if (enabled_via_apicbase)
disable_local_APIC();
- local_irq_enable();
+ local_irq_restore(flags);
}
#ifdef CONFIG_PM
c->x86_capability[4] = excap;
c->x86 = (tfms >> 8) & 15;
c->x86_model = (tfms >> 4) & 15;
- if (c->x86 == 0xf) {
+ if (c->x86 == 0xf)
c->x86 += (tfms >> 20) & 0xff;
+ if (c->x86 >= 0x6)
c->x86_model += ((tfms >> 16) & 0xF) << 4;
- }
c->x86_mask = tfms & 15;
} else {
/* Have CPUID level 0 only - unheard of */
{
unsigned long cr4;
unsigned long temp;
+ struct Xgt_desc_struct *cpu_gdt_descr;
spin_lock(&efi_rt_lock);
local_irq_save(efi_rt_eflags);
+ cpu_gdt_descr = &per_cpu(cpu_gdt_descr, 0);
+
/*
* If I don't have PSE, I should just duplicate two entries in page
* directory. If I have PSE, I just need to duplicate one entry in
*/
local_flush_tlb();
- per_cpu(cpu_gdt_descr, 0).address =
- __pa(per_cpu(cpu_gdt_descr, 0).address);
- load_gdt((struct Xgt_desc_struct *)__pa(&per_cpu(cpu_gdt_descr, 0)));
+ cpu_gdt_descr->address = __pa(cpu_gdt_descr->address);
+ load_gdt(cpu_gdt_descr);
}
static void efi_call_phys_epilog(void)
{
unsigned long cr4;
+ struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, 0);
- per_cpu(cpu_gdt_descr, 0).address =
- (unsigned long)__va(per_cpu(cpu_gdt_descr, 0).address);
- load_gdt((struct Xgt_desc_struct *)__va(&per_cpu(cpu_gdt_descr, 0)));
+ cpu_gdt_descr->address = __va(cpu_gdt_descr->address);
+ load_gdt(cpu_gdt_descr);
cr4 = read_cr4();
static DEFINE_SPINLOCK(ioapic_lock);
+int timer_over_8254 __initdata = 1;
+
/*
* Is the SiS APIC rmw bug present ?
* -1 = don't know, 0 = no, 1 = yes
apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
timer_ack = 1;
- enable_8259A_irq(0);
+ if (timer_over_8254 > 0)
+ enable_8259A_irq(0);
pin1 = find_isa_irq_pin(0, mp_INT);
apic1 = find_isa_irq_apic(0, mp_INT);
print_IO_APIC();
}
+static int __init setup_disable_8254_timer(char *s)
+{
+ timer_over_8254 = -1;
+ return 1;
+}
+static int __init setup_enable_8254_timer(char *s)
+{
+ timer_over_8254 = 2;
+ return 1;
+}
+
+__setup("disable_8254_timer", setup_disable_8254_timer);
+__setup("enable_8254_timer", setup_enable_8254_timer);
+
/*
* Called after all the initialization is done. If we didnt find any
* APIC bugs then we can allow the modify fast path
__asm__ __volatile__ (
"\tljmp $"STR(__KERNEL_CS)",$1f\n"
"\t1:\n"
- "\tmovl $"STR(__KERNEL_DS)",%eax\n"
- "\tmovl %eax,%ds\n"
- "\tmovl %eax,%es\n"
- "\tmovl %eax,%fs\n"
- "\tmovl %eax,%gs\n"
- "\tmovl %eax,%ss\n"
- );
+ "\tmovl $"STR(__KERNEL_DS)",%%eax\n"
+ "\tmovl %%eax,%%ds\n"
+ "\tmovl %%eax,%%es\n"
+ "\tmovl %%eax,%%fs\n"
+ "\tmovl %%eax,%%gs\n"
+ "\tmovl %%eax,%%ss\n"
+ ::: "eax", "memory");
#undef STR
#undef __STR
}
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
+#include <linux/cpumask.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
error = -EINVAL;
goto out;
}
-
- for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) {
+
+ for_each_online_cpu(cpu_num) {
struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/
continue;
error = -EFAULT;
goto out;
}
- for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) {
+ for_each_online_cpu(cpu_num) {
struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/
continue;
}
}
/* now check if any cpu has matched */
- for (cpu_num = 0, allocated_flag = 0, sum = 0; cpu_num < num_online_cpus(); cpu_num++) {
+ allocated_flag = 0;
+ sum = 0;
+ for_each_online_cpu(cpu_num) {
if (ucode_cpu_info[cpu_num].err == MC_MARKED) {
struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
if (!allocated_flag) {
}
out_free:
- for (i = 0; i < num_online_cpus(); i++) {
+ for_each_online_cpu(i) {
if (ucode_cpu_info[i].mc) {
int j;
void *tmp = ucode_cpu_info[i].mc;
vfree(tmp);
- for (j = i; j < num_online_cpus(); j++) {
+ for_each_online_cpu(j) {
if (ucode_cpu_info[j].mc == tmp)
ucode_cpu_info[j].mc = NULL;
}
wrmsr(base+i, 0, 0);
}
-static inline void write_watchdog_counter(const char *descr)
+static void write_watchdog_counter(const char *descr)
{
u64 count = (u64)cpu_khz * 1000;
* die_nmi will return ONLY if NOTIFY_STOP happens..
*/
die_nmi(regs, "NMI Watchdog detected LOCKUP");
-
+ } else {
last_irq_sums[cpu] = sum;
alert_counter[cpu] = 0;
}
if (efi_enabled)
efi_map_memmap();
+#ifdef CONFIG_X86_IO_APIC
+ check_acpi_pci(); /* Checks more than just ACPI actually */
+#endif
+
#ifdef CONFIG_ACPI
/*
* Parse the ACPI tables for possible boot-time SMP configuration.
int apicid, ret;
lock_cpu_hotplug();
+
+ /*
+ * On x86, CPU0 is never offlined. Trying to bring up an
+ * already-booted CPU will hang. So check for that case.
+ */
+ if (cpu_online(cpu)) {
+ ret = -EINVAL;
+ goto exit;
+ }
+
apicid = x86_cpu_to_apicid[cpu];
if (apicid == BAD_APICID) {
ret = -ENODEV;
write_seqlock_irqsave(&xtime_lock, flags);
xtime.tv_sec = sec;
xtime.tv_nsec = 0;
- write_sequnlock_irqrestore(&xtime_lock, flags);
- jiffies += sleep_length;
+ jiffies_64 += sleep_length;
wall_jiffies += sleep_length;
+ write_sequnlock_irqrestore(&xtime_lock, flags);
if (last_timer->resume)
last_timer->resume();
cur_timer = last_timer;
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:18:49 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:10:42 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_BRL_EMU=y
CONFIG_IA64_L1_CACHE_SHIFT=6
-# CONFIG_NUMA is not set
-# CONFIG_VIRTUAL_MEM_MAP is not set
# CONFIG_IA64_CYCLONE is not set
CONFIG_IOSAPIC=y
-# CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# CONFIG_HOTPLUG_CPU is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+# CONFIG_VIRTUAL_MEM_MAP is not set
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
# CONFIG_IA64_MCA_RECOVERY is not set
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# Power management and ACPI
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=m
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=m
#
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# Generic devices
#
CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
CONFIG_SND_CS4281=m
+# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-CONFIG_USB_BLUETOOTH_TTY=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS)
#
#
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
CONFIG_GENERIC_PENDING_IRQ=y
#
-# Profiling support
+# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_IA64_GRANULE_16MB is not set
CONFIG_IA64_GRANULE_64MB=y
# CONFIG_IA64_PRINT_HAZARDS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Wed Sep 28 08:27:29 2005
+# Linux kernel version: 2.6.16-rc5
+# Thu Mar 2 16:39:10 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
#
# Firmware Drivers
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# Power management and ACPI
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# Plug and Play support
#
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
#
# Block devices
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS4281=m
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
#
# SN Devices
CONFIG_SGI_IOC4=y
CONFIG_SGI_IOC3=y
+#
+# EDAC - error detection and reporting (RAS)
+#
+
#
# File systems
#
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
# CONFIG_HP_SIMSCSI is not set
#
-# Profiling support
+# Instrumentation Support
#
# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
#
# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:13:41 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_HOTPLUG is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
CONFIG_IA64_HP_SIM=y
# CONFIG_ITANIUM is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
# CONFIG_IA64_PAGE_SIZE_16KB is not set
CONFIG_IA64_PAGE_SIZE_64KB=y
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_MCKINLEY_ASTEP_SPECIFIC is not set
-# CONFIG_VIRTUAL_MEM_MAP is not set
# CONFIG_IA64_CYCLONE is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=64
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_SCHED_SMT is not set
CONFIG_PREEMPT=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+# CONFIG_VIRTUAL_MEM_MAP is not set
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
+# CONFIG_IA64_MCA_RECOVERY is not set
# CONFIG_PERFMON is not set
CONFIG_IA64_PALINFO=m
# Firmware Drivers
#
CONFIG_EFI_VARS=y
-# CONFIG_SMBIOS is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# Power management and ACPI
#
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
#
# Device Drivers
#
#
# Generic Driver Options
#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
#
# Memory Technology Devices (MTD)
#
#
# Block devices
#
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
-# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_DEBUG is not set
#
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
# I2O device support
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
+# CONFIG_NETDEVICES is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
#
-# Networking options
+# PHY device support
#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
#
-# SCTP Configuration (EXPERIMENTAL)
+# Ethernet (10 or 100Mbit)
#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
+# CONFIG_NET_ETHERNET is not set
#
-# QoS and/or fair queueing
+# Ethernet (1000 Mbit)
#
-# CONFIG_NET_SCHED is not set
#
-# Network testing
+# Ethernet (10000 Mbit)
#
-# CONFIG_NET_PKTGEN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_NETDEVICES is not set
#
# ISDN subsystem
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-
#
# Input Device Drivers
#
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
#
# Character devices
#
#
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_QIC02_TAPE is not set
#
# IPMI
CONFIG_EFI_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
-# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
#
# Misc devices
#
+#
+# Multimedia Capabilities Port drivers
+#
+
#
# Multimedia devices
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
#
# USB support
#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS)
+#
+
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
#
# Library routines
#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# HP Simulator drivers
CONFIG_HP_SIMSCSI=y
#
-# Profiling support
+# Instrumentation Support
#
# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
#
# Kernel hacking
#
-# CONFIG_IA64_GRANULE_16MB is not set
-CONFIG_IA64_GRANULE_64MB=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_IA64_PRINT_HAZARDS is not set
-# CONFIG_DISABLE_VHPT is not set
+# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_IA64_GRANULE_16MB is not set
+CONFIG_IA64_GRANULE_64MB=y
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
-CONFIG_DEBUG_INFO=y
CONFIG_SYSVIPC_COMPAT=y
#
# Security options
#
+# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc4
-# Fri Dec 2 10:33:48 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:06:38 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_CPUSETS=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
-CONFIG_ZONE_DMA_IS_DMA32=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
#
# Firmware Drivers
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-CONFIG_SCSI_QLA22XX=y
-CONFIG_SCSI_QLA2300=y
-CONFIG_SCSI_QLA2322=y
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
CONFIG_AGP_SGI_TIOCA=y
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=m
-# CONFIG_HPET is not set
CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
CONFIG_SGI_IOC4=y
CONFIG_SGI_IOC3=y
+#
+# EDAC - error detection and reporting (RAS)
+#
+
#
# File systems
#
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc4
-# Fri Dec 2 16:06:32 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 15:49:18 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ZONE_DMA_IS_DMA32=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_ZX1 is not set
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
CONFIG_SCSI_QLOGIC_FC=y
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
#
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS)
#
#
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:15:01 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 15:55:36 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
CONFIG_IA64_HP_ZX1=y
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_NUMA is not set
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
# CONFIG_IA64_CYCLONE is not set
CONFIG_IOSAPIC=y
-# CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=16
# CONFIG_HOTPLUG_CPU is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
CONFIG_IA64_MCA_RECOVERY=y
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# Power management and ACPI
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-CONFIG_IP_NF_ARPTABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
#
# DCCP Configuration (EXPERIMENTAL)
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
+# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
#
# Video Adapters
#
+# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_AUDIO_DECODER is not set
+# CONFIG_VIDEO_DECODER is not set
#
# Radio Adapters
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
CONFIG_SND_FM801=y
CONFIG_SND_FM801_TEA575X=y
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
+# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS)
#
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
CONFIG_GENERIC_PENDING_IRQ=y
#
-# Profiling support
+# Instrumentation Support
#
# CONFIG_PROFILING is not set
+CONFIG_KPROBES=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
-CONFIG_KPROBES=y
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
CONFIG_IA64_PRINT_HAZARDS=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:13:03 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:02:28 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
-CONFIG_NUMA=y
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
# CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=512
CONFIG_HOTPLUG_CPU=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_NUMA=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
#
# Firmware Drivers
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# Power management and ACPI
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_SGI_L1_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SGI_IOC4=y
+# CONFIG_SERIAL_SGI_IOC3 is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS4281=m
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
#
# SN Devices
#
CONFIG_SGI_IOC4=y
+CONFIG_SGI_IOC3=m
+
+#
+# EDAC - error detection and reporting (RAS)
+#
#
# File systems
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
# CONFIG_HP_SIMSCSI is not set
#
-# Profiling support
+# Instrumentation Support
#
# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
u32* volatile cyclone_timer; /* Cyclone MPMC0 register */
if (!use_cyclone)
- return -ENODEV;
+ return 0;
printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n");
data8 0 // timer_delete
data8 0 // clock_settime
data8 fsys_clock_gettime // clock_gettime
- #define __NR_syscall_last 1255
- .space 8*(NR_syscalls + 1024 - __NR_syscall_last), 0
-
- .org fsyscall_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
+ // fill in zeros for the remaining entries
+ .zero:
+ .space fsyscall_table + 8*NR_syscalls - .zero, 0
;; // avoid RAW on r18
mov ar.ccv=r18 // set compare value for cmpxchg
or r25=_PAGE_D|_PAGE_A,r18 // set the dirty and accessed bits
+ tbit.z p7,p6 = r18,_PAGE_P_BIT // Check present bit
;;
- cmpxchg8.acq r26=[r17],r25,ar.ccv
+(p6) cmpxchg8.acq r26=[r17],r25,ar.ccv // Only update if page is present
mov r24=PAGE_SHIFT<<2
;;
- cmp.eq p6,p7=r26,r18
+(p6) cmp.eq p6,p7=r26,r18 // Only compare if page is present
;;
(p6) itc.d r25 // install updated PTE
;;
;;
mov ar.ccv=r18 // set compare value for cmpxchg
or r25=_PAGE_A,r18 // set the accessed bit
+ tbit.z p7,p6 = r18,_PAGE_P_BIT // Check present bit
;;
- cmpxchg8.acq r26=[r17],r25,ar.ccv
+(p6) cmpxchg8.acq r26=[r17],r25,ar.ccv // Only if page present
mov r24=PAGE_SHIFT<<2
;;
- cmp.eq p6,p7=r26,r18
+(p6) cmp.eq p6,p7=r26,r18 // Only if page present
;;
(p6) itc.i r25 // install updated PTE
;;
;; // avoid RAW on r18
mov ar.ccv=r18 // set compare value for cmpxchg
or r25=_PAGE_A,r18 // set the dirty bit
+ tbit.z p7,p6 = r18,_PAGE_P_BIT // Check present bit
;;
- cmpxchg8.acq r26=[r17],r25,ar.ccv
+(p6) cmpxchg8.acq r26=[r17],r25,ar.ccv // Only if page is present
mov r24=PAGE_SHIFT<<2
;;
- cmp.eq p6,p7=r26,r18
+(p6) cmp.eq p6,p7=r26,r18 // Only if page is present
;;
(p6) itc.d r25 // install updated PTE
/*
// 0x5a00 Entry 30 (size 16 bundles) Unaligned Reference (57)
ENTRY(unaligned_access)
DBG_FAULT(30)
- mov r16=cr.ipsr
mov r31=pr // prepare to save predicates
;;
br.sptk.many dispatch_unaligned_handler
void
mca_handler_bh(unsigned long paddr)
{
- printk(KERN_DEBUG "OS_MCA: process [pid: %d](%s) encounters MCA.\n",
- current->pid, current->comm);
+ printk(KERN_ERR
+ "OS_MCA: process [pid: %d](%s) encounters MCA (paddr=%lx)\n",
+ current->pid, current->comm, paddr);
spin_lock(&mca_bh_lock);
switch (mca_page_isolate(paddr)) {
printk(KERN_DEBUG "Page isolation: ( %lx ) success.\n", paddr);
break;
case ISOLATE_NG:
- printk(KERN_DEBUG "Page isolation: ( %lx ) failure.\n", paddr);
+ printk(KERN_CRIT "Page isolation: ( %lx ) failure.\n", paddr);
break;
default:
break;
return 0;
/*
- * If there is no bus error, record is weird but we need not to recover.
+ * The cache check and bus check bits have four possible states
+ * cc bc
+ * 0 0 Weird record, not recovered
+ * 1 0 Cache error, not recovered
+ * 0 1 I/O error, attempt recovery
+ * 1 1 Memory error, attempt recovery
*/
if (psp->bc == 0 || pbci == NULL)
- return 1;
+ return 0;
/*
* Sorry, we cannot handle so many.
#include <asm/uaccess.h>
#include <asm/unaligned.h>
-extern void die_if_kernel(char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
+extern void die_if_kernel(char *str, struct pt_regs *regs, long err);
#undef DEBUG_UNALIGNED_TRAP
#define IA64_FIRST_ROTATING_FR 32
#define SIGN_EXT9 0xffffffffffffff00ul
+/*
+ * sysctl settable hook which tells the kernel whether to honor the
+ * IA64_THREAD_UAC_NOPRINT prctl. Because this is user settable, we want
+ * to allow the super user to enable/disable this for security reasons
+ * (i.e. don't allow attacker to fill up logs with unaligned accesses).
+ */
+int no_unaligned_warning;
+static int noprint_warning;
+
/*
* For M-unit:
*
if ((current->thread.flags & IA64_THREAD_UAC_SIGBUS) != 0)
goto force_sigbus;
- if (!(current->thread.flags & IA64_THREAD_UAC_NOPRINT)
- && within_logging_rate_limit())
+ if (!no_unaligned_warning &&
+ !(current->thread.flags & IA64_THREAD_UAC_NOPRINT) &&
+ within_logging_rate_limit())
{
char buf[200]; /* comm[] is at most 16 bytes... */
size_t len;
if (user_mode(regs))
tty_write_message(current->signal->tty, buf);
buf[len-1] = '\0'; /* drop '\r' */
- printk(KERN_WARNING "%s", buf); /* watch for command names containing %s */
+ /* watch for command names containing %s */
+ printk(KERN_WARNING "%s", buf);
+ } else {
+ if (no_unaligned_warning && !noprint_warning) {
+ noprint_warning = 1;
+ printk(KERN_WARNING "%s(%d) encountered an "
+ "unaligned exception which required\n"
+ "kernel assistance, which degrades "
+ "the performance of the application.\n"
+ "Unaligned exception warnings have "
+ "been disabled by the system "
+ "administrator\n"
+ "echo 0 > /proc/sys/kernel/ignore-"
+ "unaligned-usertrap to re-enable\n",
+ current->comm, current->pid);
+ }
}
} else {
if (within_logging_rate_limit())
char * __init
pcibios_setup (char *str)
{
- return NULL;
+ return str;
}
int
EXPORT_SYMBOL(sn_pci_controller_fixup);
EXPORT_SYMBOL(sn_bus_store_sysdata);
EXPORT_SYMBOL(sn_bus_free_sysdata);
-EXPORT_SYMBOL(sn_pcidev_info_get);
static int __init sn2_ptc_init(void)
{
if (!ia64_platform_is("sn2"))
- return -ENOSYS;
+ return 0;
if (!(proc_sn2_ptc = create_proc_entry(PTC_BASENAME, 0444, NULL))) {
printk(KERN_ERR "unable to create %s proc entry", PTC_BASENAME);
int found_tiocx_device = 0;
if (!ia64_platform_is("sn2"))
- return -ENODEV;
+ return 0;
bus_register(&tiocx_bus_type);
depends on SYS_HAS_CPU_MIPS32_R1
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
help
Choose this option to build a kernel for release 1 or later of the
MIPS32 architecture. Most modern embedded systems with a 32-bit
depends on SYS_HAS_CPU_MIPS32_R2
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
help
Choose this option to build a kernel for release 2 or later of the
MIPS32 architecture. Most modern embedded systems with a 32-bit
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
help
Choose this option to build a kernel for release 1 or later of the
MIPS64 architecture. Many modern embedded systems with a 64-bit
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
help
Choose this option to build a kernel for release 2 or later of the
MIPS64 architecture. Many modern embedded systems with a 64-bit
# crossformat linking we rely on the elf2ecoff tool for format conversion.
#
cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
+cflags-y += -msoft-float
LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
MODFLAGS += -mlong-calls
cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB)
cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL)
-cflags-$(CONFIG_SB1XXX_CORELIS) += -mno-sched-prolog -fno-omit-frame-pointer
+cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \
+ -fno-omit-frame-pointer
#
# Use: $(call set_gccflags,<cpu0>,<isa0>,<cpu1>,<isa1>,<isa2>)
}
}
-static int __init prom_console_setup(struct console *co, char *options)
+static int prom_console_setup(struct console *co, char *options)
{
return !(prom_flags & PROM_FLAG_USE_AS_CONSOLE);
}
* Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
* Copyright (C) 1999 Silicon Graphics, Inc.
*/
-#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <asm/bootinfo.h>
#include <asm/system.h>
-extern void *sgiwd93_host;
-extern void reset_wd33c93(void *instance);
-
VOID
ArcHalt(VOID)
{
bc_disable();
local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
- reset_wd33c93(sgiwd93_host);
-#endif
ARC_CALL0(halt);
never: goto never;
}
{
bc_disable();
local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
- reset_wd33c93(sgiwd93_host);
-#endif
ARC_CALL0(pdown);
never: goto never;
}
{
bc_disable();
local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
- reset_wd33c93(sgiwd93_host);
-#endif
ARC_CALL0(restart);
never: goto never;
}
{
bc_disable();
local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
- reset_wd33c93(sgiwd93_host);
-#endif
ARC_CALL0(reboot);
never: goto never;
}
{
bc_disable();
local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
- reset_wd33c93(sgiwd93_host);
-#endif
ARC_CALL0(imode);
never: goto never;
}
void au1000_halt(void)
{
-#if defined(CONFIG_MIPS_PB1550)
+#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
/* power off system */
- printk("\n** Powering off Pb1550\n");
+ printk("\n** Powering off...\n");
au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C);
au_sync();
while(1); /* should not get here */
-#endif
+#else
printk(KERN_NOTICE "\n** You can safely turn off the power\n");
#ifdef CONFIG_MIPS_MIRAGE
au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
#endif
+#ifdef CONFIG_MIPS_DB1200
+ au_writew(au_readw(0xB980001C) | (1<<14), 0xB980001C);
+#endif
#ifdef CONFIG_PM
au_sleep();
"wait\n\t"
".set\tmips0");
#endif
+#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */
}
void au1000_power_off(void)
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
-#include <asm/ptrace.h>
-#include <linux/sched.h>
#include <linux/kernel_stat.h>
+#include <linux/mv643xx.h>
+#include <linux/sched.h>
+
+#include <asm/ptrace.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <linux/mv643xx.h>
+#include <asm/marvell.h>
static unsigned int irq_base;
return error;
}
-struct dirent32 {
- unsigned int d_ino;
- unsigned int d_off;
- unsigned short d_reclen;
- char d_name[NAME_MAX + 1];
-};
-
-static void
-xlate_dirent(void *dirent64, void *dirent32, long n)
-{
- long off;
- struct dirent *dirp;
- struct dirent32 *dirp32;
-
- off = 0;
- while (off < n) {
- dirp = (struct dirent *)(dirent64 + off);
- dirp32 = (struct dirent32 *)(dirent32 + off);
- off += dirp->d_reclen;
- dirp32->d_ino = dirp->d_ino;
- dirp32->d_off = (unsigned int)dirp->d_off;
- dirp32->d_reclen = dirp->d_reclen;
- strncpy(dirp32->d_name, dirp->d_name, dirp->d_reclen - ((3 * 4) + 2));
- }
- return;
-}
-
-asmlinkage long
-sys32_getdents(unsigned int fd, void * dirent32, unsigned int count)
-{
- long n;
- void *dirent64;
-
- dirent64 = (void *)((unsigned long)(dirent32 + (sizeof(long) - 1)) & ~(sizeof(long) - 1));
- if ((n = sys_getdents(fd, dirent64, count - (dirent64 - dirent32))) < 0)
- return(n);
- xlate_dirent(dirent64, dirent32, n);
- return(n);
-}
-
-asmlinkage int old_readdir(unsigned int fd, void * dirent, unsigned int count);
-
-asmlinkage int
-sys32_readdir(unsigned int fd, void * dirent32, unsigned int count)
-{
- int n;
- struct dirent dirent64;
-
- if ((n = old_readdir(fd, &dirent64, count)) < 0)
- return(n);
- xlate_dirent(&dirent64, dirent32, dirent64.d_reclen);
- return(n);
-}
-
asmlinkage int
sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr, int options)
{
PTR sys_fdatasync
PTR sys_truncate
PTR sys_ftruncate /* 6075 */
- PTR sys32_getdents
+ PTR compat_sys_getdents
PTR sys_getcwd
PTR sys_chdir
PTR sys_fchdir
PTR sys_uselib
PTR sys_swapon
PTR sys_reboot
- PTR sys32_readdir
+ PTR compat_sys_old_readdir
PTR old_mmap /* 4090 */
PTR sys_munmap
PTR sys_truncate
PTR sys_setfsuid
PTR sys_setfsgid
PTR sys32_llseek /* 4140 */
- PTR sys32_getdents
+ PTR compat_sys_getdents
PTR compat_sys_select
PTR sys_flock
PTR sys_msync
sparse_init();
paging_init();
resource_init();
+#ifdef CONFIG_SMP
+ plat_smp_setup();
+#endif
}
int __init fpu_disable(char *s)
init_new_context(current, &init_mm);
current_thread_info()->cpu = 0;
smp_tune_scheduling();
- prom_prepare_cpus(max_cpus);
+ plat_prepare_cpus(max_cpus);
}
/* preload SMP state for boot cpu */
* Make sure all CPU's are in a sensible state before we boot any of the
* secondarys
*/
-void prom_prepare_cpus(unsigned int max_cpus)
+void plat_smp_setup(void)
{
unsigned long val;
int i, num;
write_vpe_c0_vpeconf0(tmp);
/* Record this as available CPU */
- if (i < max_cpus) {
- cpu_set(i, phys_cpu_present_map);
- __cpu_number_map[i] = ++num;
- __cpu_logical_map[num] = i;
- }
+ cpu_set(i, phys_cpu_present_map);
+ __cpu_number_map[i] = ++num;
+ __cpu_logical_map[num] = i;
}
/* disable multi-threading with TC's */
set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
}
+}
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ;
unsigned long seq;
unsigned long lost;
unsigned long usec, sec;
- unsigned long max_ntp_tick = tick_usec - tickadj;
+ unsigned long max_ntp_tick;
do {
seq = read_seqbegin(&xtime_lock);
* Better to lose some accuracy than have time go backwards..
*/
if (unlikely(time_adjust < 0)) {
+ max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj;
usec = min(usec, max_ntp_tick);
if (lost)
usec += lost * max_ntp_tick;
} else if (unlikely(lost))
- usec += lost * tick_usec;
+ usec += lost * (USEC_PER_SEC / HZ);
sec = xtime.tv_sec;
usec += (xtime.tv_nsec / 1000);
unsigned long j;
unsigned int count;
+ write_seqlock(&xtime_lock);
+
count = mips_hpt_read();
mips_timer_ack();
* CMOS clock accordingly every ~11 minutes. rtc_set_time() has to be
* called as close as possible to 500 ms before the new second starts.
*/
- write_seqlock(&xtime_lock);
if (ntp_synced() &&
xtime.tv_sec > last_rtc_update + 660 &&
(xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
last_rtc_update = xtime.tv_sec - 600;
}
}
- write_sequnlock(&xtime_lock);
/*
* If jiffies has overflown in this timer_interrupt, we must
}
}
+ write_sequnlock(&xtime_lock);
+
/*
* In UP mode, we call local_timer_interrupt() to do profiling
* and process accouting.
.con_initcall.init : { *(.con_initcall.init) }
__con_initcall_end = .;
SECURITY_INIT
+ /* .exit.text is discarded at runtime, not link time, to deal with
+ references from .rodata */
+ .exit.text : { *(.exit.text) }
. = ALIGN(_PAGE_SIZE);
__initramfs_start = .;
.init.ramfs : { *(.init.ramfs) }
/* Sections to be discarded */
/DISCARD/ : {
- *(.exit.text)
*(.exit.data)
*(.exitcall.exit)
return ioport_map(start, len);
if (flags & IORESOURCE_MEM) {
if (flags & IORESOURCE_CACHEABLE)
- return ioremap_cacheable_cow(start, len);
+ return ioremap_cachable(start, len);
return ioremap_nocache(start, len);
}
{
unsigned long sc_lsize = cpu_scache_line_size();
- if (sc_lsize == 16)
+ if (scache_size == 0)
+ r4k_blast_scache_page = (void *)no_sc_noop;
+ else if (sc_lsize == 16)
r4k_blast_scache_page = blast_scache16_page;
else if (sc_lsize == 32)
r4k_blast_scache_page = blast_scache32_page;
{
unsigned long sc_lsize = cpu_scache_line_size();
- if (sc_lsize == 16)
+ if (scache_size == 0)
+ r4k_blast_scache_page_indexed = (void *)no_sc_noop;
+ else if (sc_lsize == 16)
r4k_blast_scache_page_indexed = blast_scache16_page_indexed;
else if (sc_lsize == 32)
r4k_blast_scache_page_indexed = blast_scache32_page_indexed;
{
unsigned long sc_lsize = cpu_scache_line_size();
- if (sc_lsize == 16)
+ if (scache_size == 0)
+ r4k_blast_scache = (void *)no_sc_noop;
+ else if (sc_lsize == 16)
r4k_blast_scache = blast_scache16;
else if (sc_lsize == 32)
r4k_blast_scache = blast_scache32;
struct flush_cache_page_args {
struct vm_area_struct *vma;
unsigned long addr;
+ unsigned long pfn;
};
static inline void local_r4k_flush_cache_page(void *args)
struct flush_cache_page_args *fcp_args = args;
struct vm_area_struct *vma = fcp_args->vma;
unsigned long addr = fcp_args->addr;
+ unsigned long paddr = fcp_args->pfn << PAGE_SHIFT;
int exec = vma->vm_flags & VM_EXEC;
struct mm_struct *mm = vma->vm_mm;
pgd_t *pgdp;
* Do indexed flush, too much work to get the (possible) TLB refills
* to work correctly.
*/
- addr = INDEX_BASE + (addr & (dcache_size - 1));
if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) {
- r4k_blast_dcache_page_indexed(addr);
- if (exec && !cpu_icache_snoops_remote_store)
- r4k_blast_scache_page_indexed(addr);
+ r4k_blast_dcache_page_indexed(cpu_has_pindexed_dcache ?
+ paddr : addr);
+ if (exec && !cpu_icache_snoops_remote_store) {
+ r4k_blast_scache_page_indexed(paddr);
+ }
}
if (exec) {
if (cpu_has_vtag_icache) {
args.vma = vma;
args.addr = addr;
+ args.pfn = pfn;
on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
}
protected_blast_dcache_range(start, end);
}
- if (!cpu_icache_snoops_remote_store) {
+ if (!cpu_icache_snoops_remote_store && scache_size) {
if (end - start > scache_size)
r4k_blast_scache();
else
R4600_HIT_CACHEOP_WAR_IMPL;
protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
- if (!cpu_icache_snoops_remote_store)
+ if (!cpu_icache_snoops_remote_store && scache_size)
protected_writeback_scache_line(addr & ~(sc_lsize - 1));
protected_flush_icache_line(addr & ~(ic_lsize - 1));
if (MIPS4K_ICACHE_REFILL_WAR) {
switch (c->cputype) {
case CPU_20KC:
case CPU_25KF:
+ c->dcache.flags |= MIPS_CACHE_PINDEX;
case CPU_R10000:
case CPU_R12000:
case CPU_SB1:
* Do indexed flush, too much work to get the (possible) TLB refills
* to work correctly.
*/
- page = (KSEG0 + (page & (dcache_size - 1)));
if (cpu_has_dc_aliases || exec)
tx39_blast_dcache_page_indexed(page);
if (exec)
}
#define I_u1u2u3(op) \
- static inline void i##op(u32 **buf, unsigned int a, \
+ static inline void __init i##op(u32 **buf, unsigned int a, \
unsigned int b, unsigned int c) \
{ \
build_insn(buf, insn##op, a, b, c); \
}
#define I_u2u1u3(op) \
- static inline void i##op(u32 **buf, unsigned int a, \
+ static inline void __init i##op(u32 **buf, unsigned int a, \
unsigned int b, unsigned int c) \
{ \
build_insn(buf, insn##op, b, a, c); \
}
#define I_u3u1u2(op) \
- static inline void i##op(u32 **buf, unsigned int a, \
+ static inline void __init i##op(u32 **buf, unsigned int a, \
unsigned int b, unsigned int c) \
{ \
build_insn(buf, insn##op, b, c, a); \
}
#define I_u1u2s3(op) \
- static inline void i##op(u32 **buf, unsigned int a, \
+ static inline void __init i##op(u32 **buf, unsigned int a, \
unsigned int b, signed int c) \
{ \
build_insn(buf, insn##op, a, b, c); \
}
#define I_u2s3u1(op) \
- static inline void i##op(u32 **buf, unsigned int a, \
+ static inline void __init i##op(u32 **buf, unsigned int a, \
signed int b, unsigned int c) \
{ \
build_insn(buf, insn##op, c, a, b); \
}
#define I_u2u1s3(op) \
- static inline void i##op(u32 **buf, unsigned int a, \
+ static inline void __init i##op(u32 **buf, unsigned int a, \
unsigned int b, signed int c) \
{ \
build_insn(buf, insn##op, b, a, c); \
}
#define I_u1u2(op) \
- static inline void i##op(u32 **buf, unsigned int a, \
+ static inline void __init i##op(u32 **buf, unsigned int a, \
unsigned int b) \
{ \
build_insn(buf, insn##op, a, b); \
}
#define I_u1s2(op) \
- static inline void i##op(u32 **buf, unsigned int a, \
+ static inline void __init i##op(u32 **buf, unsigned int a, \
signed int b) \
{ \
build_insn(buf, insn##op, a, b); \
}
#define I_u1(op) \
- static inline void i##op(u32 **buf, unsigned int a) \
+ static inline void __init i##op(u32 **buf, unsigned int a) \
{ \
build_insn(buf, insn##op, a); \
}
#define I_0(op) \
- static inline void i##op(u32 **buf) \
+ static inline void __init i##op(u32 **buf) \
{ \
build_insn(buf, insn##op); \
}
}
/* convenience functions for labeled branches */
-static void __attribute__((unused)) il_bltz(u32 **p, struct reloc **r,
- unsigned int reg, enum label_id l)
+static void __init __attribute__((unused))
+ il_bltz(u32 **p, struct reloc **r, unsigned int reg, enum label_id l)
{
r_mips_pc16(r, *p, l);
i_bltz(p, reg, 0);
}
-static void __attribute__((unused)) il_b(u32 **p, struct reloc **r,
+static void __init __attribute__((unused)) il_b(u32 **p, struct reloc **r,
enum label_id l)
{
r_mips_pc16(r, *p, l);
i_b(p, 0);
}
-static void il_beqz(u32 **p, struct reloc **r, unsigned int reg,
+static void __init il_beqz(u32 **p, struct reloc **r, unsigned int reg,
enum label_id l)
{
r_mips_pc16(r, *p, l);
i_beqz(p, reg, 0);
}
-static void __attribute__((unused))
+static void __init __attribute__((unused))
il_beqzl(u32 **p, struct reloc **r, unsigned int reg, enum label_id l)
{
r_mips_pc16(r, *p, l);
i_beqzl(p, reg, 0);
}
-static void il_bnez(u32 **p, struct reloc **r, unsigned int reg,
+static void __init il_bnez(u32 **p, struct reloc **r, unsigned int reg,
enum label_id l)
{
r_mips_pc16(r, *p, l);
i_bnez(p, reg, 0);
}
-static void il_bgezl(u32 **p, struct reloc **r, unsigned int reg,
+static void __init il_bgezl(u32 **p, struct reloc **r, unsigned int reg,
enum label_id l)
{
r_mips_pc16(r, *p, l);
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
+#include <linux/mv643xx.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
-#include <asm/mv64340.h>
#include <asm/pmon.h>
#include "jaguar_atx_fpga.h"
* BRIEF MODULE DESCRIPTION
* Momentum Computer Jaguar-ATX board dependent boot routines
*
- * Copyright (C) 1996, 1997, 2001, 2004 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1996, 1997, 2001, 04, 06 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2000 RidgeRun, Inc.
* Copyright (C) 2001 Red Hat, Inc.
* Copyright (C) 2002 Momentum Computer
#include <linux/interrupt.h>
#include <linux/timex.h>
#include <linux/vmalloc.h>
+#include <linux/mv643xx.h>
+
#include <asm/time.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/reboot.h>
#include <asm/tlbflush.h>
-#include <asm/mv64340.h>
#include "jaguar_atx_fpga.h"
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/bitops.h>
+#include <linux/mv643xx.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
-#include <asm/mv64340.h>
#include <asm/system.h>
extern asmlinkage void ocelot_handle_int(void);
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
+#include <linux/mv643xx.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
-#include <asm/mv64340.h>
#include <asm/pmon.h>
#include "ocelot_c_fpga.h"
#include <linux/pm.h>
#include <linux/timex.h>
#include <linux/vmalloc.h>
+#include <linux/mv643xx.h>
#include <asm/time.h>
#include <asm/bootinfo.h>
#include <asm/processor.h>
#include <asm/ptrace.h>
#include <asm/reboot.h>
+#include <asm/marvell.h>
#include <linux/bootmem.h>
#include <linux/blkdev.h>
-#include <asm/mv64340.h>
#include "ocelot_c_fpga.h"
unsigned long marvell_base;
/* shut down ethernet ports, just to be sure our memory doesn't get
* corrupted by random ethernet traffic.
*/
- MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
- MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
- MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
- MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
+ MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
+ MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
+ MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
+ MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
do {}
- while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
+ while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
do {}
- while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
+ while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
do {}
- while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
+ while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
do {}
- while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
- MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0),
- MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
- MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1),
- MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
+ while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
+ MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0),
+ MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
+ MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1),
+ MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
/* Turn off the Bit-Error LED */
OCELOT_FPGA_WRITE(0x80, CLR);
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2004, 06 by Ralf Baechle (ralf@linux-mips.org)
*/
#include <linux/types.h>
#include <linux/pci.h>
-#include <asm/mv64340.h>
+#include <linux/mv643xx.h>
#include <linux/init.h>
+#include <asm/marvell.h>
+
/*
* We assume the address ranges have already been setup appropriately by
* the firmware. PMON in case of the Ocelot C does that.
* We don't want to start the secondary CPU yet nor do we have a nice probing
* feature in PMON so we just assume presence of the secondary core.
*/
-static char maxcpus_string[] __initdata =
- KERN_WARNING "max_cpus set to 0; using 1 instead\n";
-
-void __init prom_prepare_cpus(unsigned int max_cpus)
+void __init plat_smp_setup(void)
{
- int enabled = 0, i;
-
- if (max_cpus == 0) {
- printk(maxcpus_string);
- max_cpus = 1;
- }
+ int i;
cpus_clear(phys_cpu_present_map);
for (i = 0; i < 2; i++) {
- if (i == max_cpus)
- break;
-
- /*
- * The boot CPU
- */
cpu_set(i, phys_cpu_present_map);
__cpu_number_map[i] = i;
__cpu_logical_map[i] = i;
- enabled++;
}
+}
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
/*
* Be paranoid. Enable the IPI only if we're really about to go SMP.
*/
- if (enabled > 1)
+ if (cpus_weight(cpu_possible_map))
set_c0_status(STATUSF_IP5);
}
REMOTE_HUB_CLR_INTR(nasid, i);
}
-void __init prom_prepare_cpus(unsigned int max_cpus)
+void __init plat_smp_setup(void)
{
cnodeid_t cnode;
alloc_cpupda(0, 0);
}
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
+ /* We already did everything necessary earlier */
+}
+
/*
* Launch a slave into smp_bootstrap(). It doesn't take an argument, and we
* set sp to the kernel stack of the newly created idle process, gp to the proc
*
* Common setup before any secondaries are started
*/
-void __init prom_prepare_cpus(unsigned int max_cpus)
+void __init plat_smp_setup(void)
{
int i, num;
__cpu_number_map[0] = 0;
__cpu_logical_map[0] = 0;
- for (i=1, num=0; i<NR_CPUS; i++) {
+ for (i = 1, num = 0; i < NR_CPUS; i++) {
if (cfe_cpu_stop(i) == 0) {
cpu_set(i, phys_cpu_present_map);
__cpu_number_map[i] = ++num;
__cpu_logical_map[num] = i;
}
}
- printk("Detected %i available secondary CPU(s)\n", num);
+ printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
+}
+
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
}
/*
#define IMR_IP3_VAL K_INT_MAP_I1
#define IMR_IP4_VAL K_INT_MAP_I2
+#define SB1250_HPT_NUM 3
+#define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */
+#define SB1250_HPT_SHIFT ((sizeof(unsigned int)*8)-V_SCD_TIMER_WIDTH)
+
+
extern int sb1250_steal_irq(int irq);
+static unsigned int sb1250_hpt_read(void);
+static void sb1250_hpt_init(unsigned int);
+
+static unsigned int hpt_offset;
+
+void __init sb1250_hpt_setup(void)
+{
+ int cpu = smp_processor_id();
+
+ if (!cpu) {
+ /* Setup hpt using timer #3 but do not enable irq for it */
+ __raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG)));
+ __raw_writeq(SB1250_HPT_VALUE,
+ IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_INIT)));
+ __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+ IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG)));
+
+ /*
+ * we need to fill 32 bits, so just use the upper 23 bits and pretend
+ * the timer is going 512Mhz instead of 1Mhz
+ */
+ mips_hpt_frequency = V_SCD_TIMER_FREQ << SB1250_HPT_SHIFT;
+ mips_hpt_init = sb1250_hpt_init;
+ mips_hpt_read = sb1250_hpt_read;
+ }
+}
+
+
void sb1250_time_init(void)
{
int cpu = smp_processor_id();
int irq = K_INT_TIMER_0+cpu;
- /* Only have 4 general purpose timers */
- if (cpu > 3) {
+ /* Only have 4 general purpose timers, and we use last one as hpt */
+ if (cpu > 2) {
BUG();
}
- if (!cpu) {
- /* Use our own gettimeoffset() routine */
- do_gettimeoffset = sb1250_gettimeoffset;
- }
-
sb1250_mask_irq(cpu, irq);
/* Map the timer interrupt to ip[4] of this cpu */
/* Disable the timer and set up the count */
__raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
#ifdef CONFIG_SIMULATION
- __raw_writeq(50000 / HZ,
+ __raw_writeq((50000 / HZ) - 1,
IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
#else
- __raw_writeq(1000000 / HZ,
+ __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1,
IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
#endif
int cpu = smp_processor_id();
int irq = K_INT_TIMER_0 + cpu;
- /* Reset the timer */
+ /* ACK interrupt */
____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
}
/*
- * We use our own do_gettimeoffset() instead of the generic one,
- * because the generic one does not work for SMP case.
- * In addition, since we use general timer 0 for system time,
- * we can get accurate intra-jiffy offset without calibration.
+ * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
+ * again. There's no easy way to set to a specific value so store init value
+ * in hpt_offset and subtract each time.
+ *
+ * Note: Timer isn't full 32bits so shift it into the upper part making
+ * it appear to run at a higher frequency.
*/
-unsigned long sb1250_gettimeoffset(void)
+static unsigned int sb1250_hpt_read(void)
{
- unsigned long count =
- __raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
+ unsigned int count;
- return 1000000/HZ - count;
- }
+ count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT))));
+
+ count = (SB1250_HPT_VALUE - count) << SB1250_HPT_SHIFT;
+
+ return count - hpt_offset;
+}
+
+static void sb1250_hpt_init(unsigned int count)
+{
+ hpt_offset = count;
+ return;
+}
return "SiByte " SIBYTE_BOARD_NAME;
}
+void __init swarm_time_init(void)
+{
+ /* Setup HPT */
+ sb1250_hpt_setup();
+}
+
void __init swarm_timer_setup(struct irqaction *irq)
{
/*
panic_timeout = 5; /* For debug. */
+ board_time_init = swarm_time_init;
board_timer_setup = swarm_timer_setup;
board_be_handler = swarm_be_handler;
strongly in flux, so no good recommendation can be made.
config CRASH_DUMP
- bool "kernel crash dumps (EXPERIMENTAL)"
+ bool "Build a kdump crash kernel (EXPERIMENTAL)"
depends on PPC_MULTIPLATFORM && PPC64 && EXPERIMENTAL
help
Build a kernel suitable for use as a kdump capture kernel.
bdnz 2b
/* Do a cache flush for our text, in case OF didn't */
-3: lis r9,_start@h
+3: lis r9,_start@ha
+ addi r9,r9,_start@l
add r9,r0,r9
lis r8,_etext@ha
addi r8,r8,_etext@l
4: dcbf r0,r9
icbi r0,r9
addi r9,r9,0x20
- cmplwi 0,r9,8
+ cmplw cr0,r9,r8
blt 4b
sync
isync
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Tue Dec 20 15:59:26 2005
+# Linux kernel version: 2.6.16-rc6
+# Wed Mar 15 16:19:48 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
CONFIG_PPC_CELL=y
-CONFIG_PPC_OF=y
# CONFIG_U3_DART is not set
CONFIG_PPC_RTAS=y
# CONFIG_RTAS_ERROR_LOGGING is not set
CONFIG_MMIO_NVRAM=y
CONFIG_CELL_IIC=y
# CONFIG_PPC_MPC106 is not set
-# CONFIG_GENERIC_TBSYNC is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
+#
+# Cell Broadband Engine options
+#
+CONFIG_SPU_FS=y
+
#
# Kernel options
#
CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_IOMMU_VMERGE is not set
CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_POLICY=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
#
# DCCP Configuration (EXPERIMENTAL)
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=m
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_SPIDER_NET=y
# CONFIG_MV643XX_ETH is not set
#
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_XMON is not set
CONFIG_IRQSTACKS=y
# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
#
# Security options
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Tue Dec 20 15:59:32 2005
+# Linux kernel version: 2.6.16-rc6
+# Wed Mar 15 16:19:52 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
# CONFIG_MMIO_NVRAM is not set
CONFIG_IBMVIO=y
# CONFIG_PPC_MPC106 is not set
-# CONFIG_GENERIC_TBSYNC is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-# CONFIG_IP_NF_MATCH_DCCP is not set
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_CONNBYTES=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_POLICY=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# Instrumentation Support
#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUGGER is not set
CONFIG_IRQSTACKS=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
#
# Security options
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Tue Dec 20 15:59:36 2005
+# Linux kernel version: 2.6.16-rc6
+# Wed Mar 15 16:19:54 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_MAPLE=y
# CONFIG_PPC_CELL is not set
-CONFIG_PPC_OF=y
CONFIG_U3_DART=y
CONFIG_MPIC=y
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
CONFIG_MPIC_BROKEN_U3=y
# CONFIG_PPC_MPC106 is not set
-CONFIG_GENERIC_TBSYNC=y
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_XMON_DEFAULT=y
# CONFIG_IRQSTACKS is not set
CONFIG_BOOTX_TEXT=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
#
# Security options
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-g461d4edf-dirty
-# Fri Jan 13 11:01:47 2006
+# Linux kernel version: 2.6.16-rc6
+# Wed Mar 15 16:19:56 2006
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
#
# Hardware crypto devices
#
-
-#
-# SEC2.x Options
-#
-CONFIG_MPC8349E_SEC2x=y
-
-#
-# SEC2.x Test Options
-#
-CONFIG_MPC8349E_SEC2xTEST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15
-# Sat Jan 14 16:26:08 2006
+# Linux kernel version: 2.6.16-rc6
+# Wed Mar 15 16:21:32 2006
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_CRASH_DUMP is not set
# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
CONFIG_IP_NF_PPTP=m
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-CONFIG_IP_NF_MATCH_DCCP=m
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-CONFIG_IP_NF_MATCH_STRING=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-# CONFIG_IP_NF_TARGET_LOG is not set
+CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
-# CONFIG_IP_NF_TARGET_NFQUEUE is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
-# CONFIG_IP_NF_MANGLE is not set
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
#
# Network testing
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
#
CONFIG_SERIAL_CORE=m
CONFIG_SERIAL_PMACZILOG=m
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+CONFIG_USB_HIDINPUT_POWERBOOK=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUGGER=y
CONFIG_XMON=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_SL82C105=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
- DEFINE(TI_SIGFRAME, offsetof(struct thread_info, nvgprs_frame));
DEFINE(TI_TASK, offsetof(struct thread_info, task));
#ifdef CONFIG_PPC32
DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
PPC_FEATURE_HAS_MMU)
#define COMMON_USER_PPC64 (COMMON_USER | PPC_FEATURE_64)
#define COMMON_USER_POWER4 (COMMON_USER_PPC64 | PPC_FEATURE_POWER4)
-#define COMMON_USER_POWER5 (COMMON_USER_PPC64 | PPC_FEATURE_POWER5)
-#define COMMON_USER_POWER5_PLUS (COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS)
+#define COMMON_USER_POWER5 (COMMON_USER_PPC64 | PPC_FEATURE_POWER5 |\
+ PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
+#define COMMON_USER_POWER5_PLUS (COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS|\
+ PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
#define COMMON_USER_BOOKE (PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \
PPC_FEATURE_BOOKE)
.cpu_name = "Cell Broadband Engine",
.cpu_features = CPU_FTRS_CELL,
.cpu_user_features = COMMON_USER_PPC64 |
- PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP,
+ PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP |
+ PPC_FEATURE_SMT,
.icache_bsize = 128,
.dcache_bsize = 128,
.cpu_setup = __setup_cpu_be,
MTMSRD(r10)
lwz r9,TI_FLAGS(r12)
li r8,-_LAST_ERRNO
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL|_TIF_RESTORE_SIGMASK)
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
bne- syscall_exit_work
cmplw 0,r3,r8
blt+ syscall_exit_cont
syscall_exit_work:
andi. r0,r9,_TIF_RESTOREALL
- bne- 2f
- cmplw 0,r3,r8
+ beq+ 0f
+ REST_NVGPRS(r1)
+ b 2f
+0: cmplw 0,r3,r8
blt+ 1f
andi. r0,r9,_TIF_NOERROR
bne- 1f
2: andi. r0,r9,(_TIF_PERSYSCALL_MASK)
beq 4f
- /* Clear per-syscall TIF flags if any are set, but _leave_
- _TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that
- yet. */
+ /* Clear per-syscall TIF flags if any are set. */
li r11,_TIF_PERSYSCALL_MASK
addi r12,r12,TI_FLAGS
subi r12,r12,TI_FLAGS
4: /* Anything which requires enabling interrupts? */
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS)
- beq 7f
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
+ beq ret_from_except
+
+ /* Re-enable interrupts */
+ ori r10,r10,MSR_EE
+ SYNC
+ MTMSRD(r10)
/* Save NVGPRS if they're not saved already */
lwz r4,_TRAP(r1)
SAVE_NVGPRS(r1)
li r4,0xc00
stw r4,_TRAP(r1)
-
- /* Re-enable interrupts */
-5: ori r10,r10,MSR_EE
- SYNC
- MTMSRD(r10)
-
- andi. r0,r9,_TIF_SAVE_NVGPRS
- bne save_user_nvgprs
-
-save_user_nvgprs_cont:
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
- beq 7f
-
+5:
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_syscall_trace_leave
- REST_NVGPRS(r1)
-
-6: lwz r3,GPR3(r1)
- LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
- SYNC
- MTMSRD(r10) /* disable interrupts again */
- rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
- lwz r9,TI_FLAGS(r12)
-7:
- andi. r0,r9,_TIF_NEED_RESCHED
- bne 8f
- lwz r5,_MSR(r1)
- andi. r5,r5,MSR_PR
- beq ret_from_except
- andi. r0,r9,_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK
- beq ret_from_except
- b do_user_signal
-8:
- ori r10,r10,MSR_EE
- SYNC
- MTMSRD(r10) /* re-enable interrupts */
- bl schedule
- b 6b
-
-save_user_nvgprs:
- lwz r8,TI_SIGFRAME(r12)
-
-.macro savewords start, end
- 1: stw \start,4*(\start)(r8)
- .section __ex_table,"a"
- .align 2
- .long 1b,save_user_nvgprs_fault
- .previous
- .if \end - \start
- savewords "(\start+1)",\end
- .endif
-.endm
- savewords 14,31
- b save_user_nvgprs_cont
-
-
-save_user_nvgprs_fault:
- li r3,11 /* SIGSEGV */
- lwz r4,TI_TASK(r12)
- bl force_sigsegv
+ b ret_from_except_full
- rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
- lwz r9,TI_FLAGS(r12)
- b save_user_nvgprs_cont
-
#ifdef SHOW_SYSCALLS
do_show_syscall:
#ifdef SHOW_SYSCALLS_TASK
stw r0,_TRAP(r1) /* register set saved */
b sys_clone
+ .globl ppc_swapcontext
+ppc_swapcontext:
+ SAVE_NVGPRS(r1)
+ lwz r0,_TRAP(r1)
+ rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
+ stw r0,_TRAP(r1) /* register set saved */
+ b sys_swapcontext
+
/*
* Top-level page fault handling.
* This is in assembler because if do_page_fault tells us that
/* Check current_thread_info()->flags */
rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
lwz r9,TI_FLAGS(r9)
- andi. r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL|_TIF_RESTORE_SIGMASK)
+ andi. r0,r9,(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NEED_RESCHED)
bne do_work
restore_user:
mtmsrd r10,1
ld r9,TI_FLAGS(r12)
li r11,-_LAST_ERRNO
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL|_TIF_SAVE_NVGPRS|_TIF_NOERROR|_TIF_RESTORE_SIGMASK)
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
bne- syscall_exit_work
cmpld r3,r11
ld r5,_CCR(r1)
If TIF_NOERROR is set, just save r3 as it is. */
andi. r0,r9,_TIF_RESTOREALL
- bne- 2f
- cmpld r3,r11 /* r10 is -LAST_ERRNO */
+ beq+ 0f
+ REST_NVGPRS(r1)
+ b 2f
+0: cmpld r3,r11 /* r10 is -LAST_ERRNO */
blt+ 1f
andi. r0,r9,_TIF_NOERROR
bne- 1f
2: andi. r0,r9,(_TIF_PERSYSCALL_MASK)
beq 4f
- /* Clear per-syscall TIF flags if any are set, but _leave_
- _TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that
- yet. */
+ /* Clear per-syscall TIF flags if any are set. */
li r11,_TIF_PERSYSCALL_MASK
addi r12,r12,TI_FLAGS
stdcx. r10,0,r12
bne- 3b
subi r12,r12,TI_FLAGS
-
-4: bl .save_nvgprs
- /* Anything else left to do? */
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS)
+
+4: /* Anything else left to do? */
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
beq .ret_from_except_lite
/* Re-enable interrupts */
ori r10,r10,MSR_EE
mtmsrd r10,1
- andi. r0,r9,_TIF_SAVE_NVGPRS
- bne save_user_nvgprs
-
- /* If tracing, re-enable interrupts and do it */
-save_user_nvgprs_cont:
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
- beq 5f
-
+ bl .save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
bl .do_syscall_trace_leave
- REST_NVGPRS(r1)
- clrrdi r12,r1,THREAD_SHIFT
-
- /* Disable interrupts again and handle other work if any */
-5: mfmsr r10
- rldicl r10,r10,48,1
- rotldi r10,r10,16
- mtmsrd r10,1
-
- b .ret_from_except_lite
+ b .ret_from_except
/* Save non-volatile GPRs, if not already saved. */
_GLOBAL(save_nvgprs)
std r0,_TRAP(r1)
blr
-
-save_user_nvgprs:
- ld r10,TI_SIGFRAME(r12)
- andi. r0,r9,_TIF_32BIT
- beq- save_user_nvgprs_64
-
- /* 32-bit save to userspace */
-
-.macro savewords start, end
- 1: stw \start,4*(\start)(r10)
- .section __ex_table,"a"
- .align 3
- .llong 1b,save_user_nvgprs_fault
- .previous
- .if \end - \start
- savewords "(\start+1)",\end
- .endif
-.endm
- savewords 14,31
- b save_user_nvgprs_cont
-
-save_user_nvgprs_64:
- /* 64-bit save to userspace */
-
-.macro savelongs start, end
- 1: std \start,8*(\start)(r10)
- .section __ex_table,"a"
- .align 3
- .llong 1b,save_user_nvgprs_fault
- .previous
- .if \end - \start
- savelongs "(\start+1)",\end
- .endif
-.endm
- savelongs 14,31
- b save_user_nvgprs_cont
-
-save_user_nvgprs_fault:
- li r3,11 /* SIGSEGV */
- ld r4,TI_TASK(r12)
- bl .force_sigsegv
-
- clrrdi r12,r1,THREAD_SHIFT
- ld r9,TI_FLAGS(r12)
- b save_user_nvgprs_cont
/*
* The sigsuspend and rt_sigsuspend system calls can call do_signal
bl .sys_clone
b syscall_exit
+_GLOBAL(ppc32_swapcontext)
+ bl .save_nvgprs
+ bl .compat_sys_swapcontext
+ b syscall_exit
+
+_GLOBAL(ppc64_swapcontext)
+ bl .save_nvgprs
+ bl .sys_swapcontext
+ b syscall_exit
+
_GLOBAL(ret_from_fork)
bl .schedule_tail
REST_NVGPRS(r1)
mr r28,r6
mr r27,r7
+ /* Align the stack to 16-byte boundary for broken yaboot */
+ rldicr r1,r1,0,59
+
/* Make sure we are running in 64 bits mode */
bl .enable_64b_mode
#endif /* CONFIG_PPC_MULTIPLATFORM */
if (mode == PCI_PROBE_NORMAL)
hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
- pci_bus_add_devices(bus);
}
static int __init pcibios_init(void)
printk("PCI: Probing PCI hardware\n");
/* Scan all of the recorded PCI controllers. */
- list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
+ list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
scan_phb(hose);
+ pci_bus_add_devices(hose->bus);
+ }
#ifndef CONFIG_PPC_ISERIES
if (pci_probe_only)
EXPORT_SYMBOL(_outsw_ns);
EXPORT_SYMBOL(_insl_ns);
EXPORT_SYMBOL(_outsl_ns);
-EXPORT_SYMBOL(ioremap);
-#ifdef CONFIG_44x
-EXPORT_SYMBOL(ioremap64);
-#endif
-EXPORT_SYMBOL(__ioremap);
-EXPORT_SYMBOL(iounmap);
-#ifdef CONFIG_PPC32
-EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */
-#endif
#if defined(CONFIG_PPC32) && (defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE))
EXPORT_SYMBOL(ppc_ide_md);
EXPORT_SYMBOL(flush_dcache_range);
#ifdef CONFIG_SMP
-EXPORT_SYMBOL(smp_call_function);
#ifdef CONFIG_PPC32
EXPORT_SYMBOL(smp_hw_index);
#endif
if (size == 0)
continue;
prom_debug(" %x %x\n", base, size);
- if (base == 0)
+ if (base == 0 && (RELOC(of_platform) & PLATFORM_LPAR))
RELOC(rmo_top) = size;
if ((base + size) > RELOC(ram_top))
RELOC(ram_top) = base + size;
regs->result);
if ((test_thread_flag(TIF_SYSCALL_TRACE)
-#ifdef CONFIG_PPC64
- || test_thread_flag(TIF_SINGLESTEP)
-#endif
- )
+ || test_thread_flag(TIF_SINGLESTEP))
&& (current->ptrace & PT_PTRACED))
do_syscall_trace();
}
error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret);
if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) {
if (in_interrupt() && printk_ratelimit()) {
- memset(&rtc_tm, 0, sizeof(struct rtc_time));
+ memset(rtc_tm, 0, sizeof(struct rtc_time));
printk(KERN_WARNING "error: reading clock"
" would delay interrupt\n");
return; /* delay not allowed */
return 0;
}
-static int __devinit setup_phb(struct device_node *dev,
- struct pci_controller *phb)
+int __devinit setup_phb(struct device_node *dev, struct pci_controller *phb)
{
if (is_python(dev))
python_countermeasures(dev);
return 0;
}
-struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn)
-{
- struct pci_controller *phb;
- int primary;
-
- primary = list_empty(&hose_list);
- phb = pcibios_alloc_controller(dn);
- if (!phb)
- return NULL;
- setup_phb(dn, phb);
- pci_process_bridge_OF_ranges(phb, dn, primary);
-
- pci_setup_phb_io_dynamic(phb, primary);
-
- pci_devs_phb_init_dynamic(phb);
- scan_phb(phb);
-
- return phb;
-}
-EXPORT_SYMBOL(init_phb_dynamic);
-
/* RPA-specific bits for removing PHBs */
int pcibios_remove_root_bus(struct pci_controller *phb)
{
elf_greg_t64 *gregs = (elf_greg_t64 *)regs;
int i;
- if (!FULL_REGS(regs)) {
- set_thread_flag(TIF_SAVE_NVGPRS);
- current_thread_info()->nvgprs_frame = frame->mc_gregs;
- }
+ WARN_ON(!FULL_REGS(regs));
for (i = 0; i <= PT_RESULT; i ++) {
if (i == 14 && !FULL_REGS(regs))
static inline int save_general_regs(struct pt_regs *regs,
struct mcontext __user *frame)
{
- if (!FULL_REGS(regs)) {
- /* Zero out the unsaved GPRs to avoid information
- leak, and set TIF_SAVE_NVGPRS to ensure that the
- registers do actually get saved later. */
- memset(®s->gpr[14], 0, 18 * sizeof(unsigned long));
- current_thread_info()->nvgprs_frame = &frame->mc_gregs;
- set_thread_flag(TIF_SAVE_NVGPRS);
- }
-
+ WARN_ON(!FULL_REGS(regs));
return __copy_to_user(&frame->mc_gregs, regs, GP_REGS_SIZE);
}
}
long sys_swapcontext(struct ucontext __user *old_ctx,
- struct ucontext __user *new_ctx,
- int ctx_size, int r6, int r7, int r8, struct pt_regs *regs)
+ struct ucontext __user *new_ctx,
+ int ctx_size, int r6, int r7, int r8, struct pt_regs *regs)
{
unsigned char tmp;
err |= __put_user(0, &sc->v_regs);
#endif /* CONFIG_ALTIVEC */
err |= __put_user(&sc->gp_regs, &sc->regs);
- if (!FULL_REGS(regs)) {
- /* Zero out the unsaved GPRs to avoid information
- leak, and set TIF_SAVE_NVGPRS to ensure that the
- registers do actually get saved later. */
- memset(®s->gpr[14], 0, 18 * sizeof(unsigned long));
- set_thread_flag(TIF_SAVE_NVGPRS);
- current_thread_info()->nvgprs_frame = &sc->gp_regs;
- }
+ WARN_ON(!FULL_REGS(regs));
err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
err |= __copy_to_user(&sc->fp_regs, ¤t->thread.fpr, FP_REGS_SIZE);
err |= __put_user(signr, &sc->signal);
COMPAT_SYS(clock_gettime)
COMPAT_SYS(clock_getres)
COMPAT_SYS(clock_nanosleep)
-COMPAT_SYS(swapcontext)
+SYSX(ppc64_swapcontext,ppc32_swapcontext,ppc_swapcontext)
COMPAT_SYS(tgkill)
COMPAT_SYS(utimes)
COMPAT_SYS(statfs64)
* the two values of tb_update_count match and are even then the
* tb_to_xs and stamp_xsec values are consistent. If not, then it
* loops back and reads them again until this criteria is met.
+ * We expect the caller to have done the first increment of
+ * vdso_data->tb_update_count already.
*/
- ++(vdso_data->tb_update_count);
- smp_wmb();
vdso_data->tb_orig_stamp = new_tb_stamp;
vdso_data->stamp_xsec = new_stamp_xsec;
vdso_data->tb_to_xs = new_tb_to_xs;
unsigned long offset;
u64 new_stamp_xsec;
u64 tlen, t2x;
+ u64 tb, xsec_old, xsec_new;
+ struct gettimeofday_vars *varp;
if (__USE_RTC())
return;
tlen = current_tick_length();
offset = cur_tb - do_gtod.varp->tb_orig_stamp;
- if (tlen == last_tick_len && offset < 0x80000000u) {
- /* check that we're still in sync; if not, resync */
- struct timeval tv;
- __do_gettimeofday(&tv, cur_tb);
- if (tv.tv_sec <= xtime.tv_sec &&
- (tv.tv_sec < xtime.tv_sec ||
- tv.tv_usec * 1000 <= xtime.tv_nsec))
- return;
- }
+ if (tlen == last_tick_len && offset < 0x80000000u)
+ return;
if (tlen != last_tick_len) {
t2x = mulhdu(tlen << TICKLEN_SHIFT, ticklen_to_xs);
last_tick_len = tlen;
new_stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC;
do_div(new_stamp_xsec, 1000000000);
new_stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC;
+
+ ++vdso_data->tb_update_count;
+ smp_mb();
+
+ /*
+ * Make sure time doesn't go backwards for userspace gettimeofday.
+ */
+ tb = get_tb();
+ varp = do_gtod.varp;
+ xsec_old = mulhdu(tb - varp->tb_orig_stamp, varp->tb_to_xs)
+ + varp->stamp_xsec;
+ xsec_new = mulhdu(tb - cur_tb, t2x) + new_stamp_xsec;
+ if (xsec_new < xsec_old)
+ new_stamp_xsec += xsec_old - xsec_new;
+
update_gtod(cur_tb, new_stamp_xsec, t2x);
}
}
#endif
+ /* Make userspace gettimeofday spin until we're done. */
+ ++vdso_data->tb_update_count;
+ smp_mb();
+
/*
* Subtract off the number of nanoseconds since the
* beginning of the last tick.
* It is computed as:
* ticklen_to_xs = 2^N / (tb_ticks_per_jiffy * 1e9)
* where N = 64 + 20 - TICKLEN_SCALE - TICKLEN_SHIFT
- * so as to give the result as a 0.64 fixed-point fraction.
+ * which turns out to be N = 51 - SHIFT_HZ.
+ * This gives the result as a 0.64 fixed-point fraction.
+ * That value is reduced by an offset amounting to 1 xsec per
+ * 2^31 timebase ticks to avoid problems with time going backwards
+ * by 1 xsec when we do timer_recalc_offset due to losing the
+ * fractional xsec. That offset is equal to ppc_tb_freq/2^51
+ * since there are 2^20 xsec in a second.
*/
- div128_by_32(1ULL << (64 + 20 - TICKLEN_SCALE - TICKLEN_SHIFT), 0,
- tb_ticks_per_jiffy, &res);
+ div128_by_32((1ULL << 51) - ppc_tb_freq, 0,
+ tb_ticks_per_jiffy << SHIFT_HZ, &res);
div128_by_32(res.result_high, res.result_low, NSEC_PER_SEC, &res);
ticklen_to_xs = res.result_low;
return;
}
+ local_irq_enable();
+
/* Try to emulate it if we should. */
if (reason & (REASON_ILLEGAL | REASON_PRIVILEGED)) {
switch (emulate_instruction(regs)) {
unsigned long offset = address - vma->vm_start;
struct page *pg;
#ifdef CONFIG_PPC64
- void *vbase = test_thread_flag(TIF_32BIT) ?
- vdso32_kbase : vdso64_kbase;
+ void *vbase = (vma->vm_mm->task_size > TASK_SIZE_USER32) ?
+ vdso64_kbase : vdso32_kbase;
#else
void *vbase = vdso32_kbase;
#endif
.cfi_startproc
/* check for update count & load values */
1: ld r8,CFG_TB_UPDATE_COUNT(r3)
- andi. r0,r4,1 /* pending update ? loop */
+ andi. r0,r8,1 /* pending update ? loop */
bne- 1b
- xor r0,r4,r4 /* create dependency */
+ xor r0,r8,r8 /* create dependency */
add r3,r3,r0
/* Get TB & offset it */
#ifdef CONFIG_PPC_ISERIES
if (_machine == PLATFORM_ISERIES_LPAR)
ret = iSeries_hpte_insert(hpteg, va,
- virt_to_abs(paddr),
+ __pa(vaddr),
tmp_mode,
HPTE_V_BOLTED,
psize);
unsigned long ioremap_base;
unsigned long ioremap_bot;
+EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */
int io_bat_index;
#if defined(CONFIG_6xx) || defined(CONFIG_POWER3)
{
return __ioremap(addr, size, _PAGE_NO_CACHE);
}
+EXPORT_SYMBOL(ioremap64);
void __iomem *
ioremap(phys_addr_t addr, unsigned long size)
return ioremap64(addr64, size);
}
#endif /* CONFIG_PHYS_64BIT */
+EXPORT_SYMBOL(ioremap);
void __iomem *
__ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
out:
return (void __iomem *) (v + ((unsigned long)addr & ~PAGE_MASK));
}
+EXPORT_SYMBOL(__ioremap);
void iounmap(volatile void __iomem *addr)
{
if (addr > high_memory && (unsigned long) addr < ioremap_bot)
vunmap((void *) (PAGE_MASK & (unsigned long)addr));
}
+EXPORT_SYMBOL(iounmap);
void __iomem *ioport_map(unsigned long port, unsigned int len)
{
pmac_mb.model_id = PMAC_TYPE_COMET;
iounmap(mach_id_ptr);
}
-#endif /* CONFIG_POWER4 */
-#ifdef CONFIG_6xx
/* Set default value of powersave_nap on machines that support it.
* It appears that uninorth rev 3 has a problem with it, we don't
* enable it on those. In theory, the flush-on-lock property is
* NAP mode
*/
powersave_lowspeed = 1;
-#endif /* CONFIG_6xx */
-#ifdef CONFIG_POWER4
+
+#else /* CONFIG_POWER4 */
powersave_nap = 1;
-#endif
+#endif /* CONFIG_POWER4 */
+
/* Check for "mobile" machine */
if (model && (strncmp(model, "PowerBook", 9) == 0
|| strncmp(model, "iBook", 5) == 0))
#include <asm/pmac_feature.h>
#include <asm/pmac_pfunc.h>
+#undef DEBUG
+#ifdef DEBUG
#define DBG(fmt...) printk(fmt)
+#else
+#define DBG(fmt...)
+#endif
static irqreturn_t macio_gpio_irq(int irq, void *data, struct pt_regs *regs)
{
#define LOG_PARSE(fmt...)
#define LOG_ERROR(fmt...) printk(fmt)
#define LOG_BLOB(t,b,c)
+
+#undef DEBUG
+#ifdef DEBUG
#define DBG(fmt...) printk(fmt)
+#else
+#define DBG(fmt...)
+#endif
/* Command numbers */
#define PMF_CMD_LIST 0
/* Probe motherboard chipset */
pmac_feature_init();
- /* We can NAP */
- powersave_nap = 1;
- printk(KERN_INFO "Using native/NAP idle loop\n");
-
/* Initialize debug stuff */
udbg_scc_init(!!strstr(cmd_line, "sccdbg"));
udbg_adb_init(!!strstr(cmd_line, "btextdbg"));
*/
static void (*pmac_tb_freeze)(int freeze);
-static unsigned long timebase;
+static u64 timebase;
static int tb_req;
static void smp_core99_give_timebase(void)
depends on RTAS_PROC && PPC_PSERIES
config LPARCFG
- tristate "LPAR Configuration Data"
+ bool "LPAR Configuration Data"
depends on PPC_PSERIES || PPC_ISERIES
help
Provide system capacity information via human readable
}
EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
+void eeh_add_device_tree_late(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ eeh_add_device_late(dev);
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ struct pci_bus *subbus = dev->subordinate;
+ if (subbus)
+ eeh_add_device_tree_late(subbus);
+ }
+ }
+}
+
/**
* eeh_add_device_late - perform EEH initialization for the indicated pci device
* @dev: pci device for which to set up EEH
static inline const char * pcid_name (struct pci_dev *pdev)
{
- if (pdev->dev.driver)
+ if (pdev && pdev->dev.driver)
return pdev->dev.driver->name;
return "";
}
#include <linux/pci.h>
#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
static struct pci_bus *
find_bus_among_children(struct pci_bus *bus,
}
}
}
+
+ eeh_add_device_tree_late(bus);
}
EXPORT_SYMBOL_GPL(pcibios_fixup_new_pci_devices);
{
u8 sec_busno;
struct pci_bus *child_bus;
- struct pci_dev *child_dev;
/* Get busno of downstream bus */
pci_read_config_byte(dev, PCI_SECONDARY_BUS, &sec_busno);
pci_scan_child_bus(child_bus);
- list_for_each_entry(child_dev, &child_bus->devices, bus_list) {
- eeh_add_device_late(child_dev);
- }
-
/* Fixup new pci devices without touching bus struct */
pcibios_fixup_new_pci_devices(child_bus, 0);
eeh_add_device_tree_early(dn);
- /* pci_scan_slot should find all children */
- slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
- num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
- if (num) {
- pcibios_fixup_new_pci_devices(bus, 1);
- pci_bus_add_devices(bus);
- }
+ if (_machine == PLATFORM_PSERIES_LPAR) {
+ /* use ofdt-based probe */
+ of_scan_bus(dn, bus);
+ if (!list_empty(&bus->devices)) {
+ pcibios_fixup_new_pci_devices(bus, 0);
+ pci_bus_add_devices(bus);
+ }
+ } else {
+ /* use legacy probe */
+ slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
+ num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
+ if (num) {
+ pcibios_fixup_new_pci_devices(bus, 1);
+ pci_bus_add_devices(bus);
+ }
- list_for_each_entry(dev, &bus->devices, bus_list) {
- eeh_add_device_late (dev);
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
- pcibios_pci_config_bridge(dev);
+ list_for_each_entry(dev, &bus->devices, bus_list)
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+ pcibios_pci_config_bridge(dev);
}
}
EXPORT_SYMBOL_GPL(pcibios_add_pci_devices);
+
+struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn)
+{
+ struct pci_controller *phb;
+ int primary;
+
+ primary = list_empty(&hose_list);
+ phb = pcibios_alloc_controller(dn);
+ if (!phb)
+ return NULL;
+ setup_phb(dn, phb);
+ pci_process_bridge_OF_ranges(phb, dn, 0);
+
+ pci_setup_phb_io_dynamic(phb, primary);
+
+ pci_devs_phb_init_dynamic(phb);
+
+ if (dn->child)
+ eeh_add_device_tree_early(dn);
+
+ scan_phb(phb);
+ pcibios_fixup_new_pci_devices(phb->bus, 0);
+ pci_bus_add_devices(phb->bus);
+
+ return phb;
+}
+EXPORT_SYMBOL_GPL(init_phb_dynamic);
DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features));
DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup));
- DEFINE(TI_SIGFRAME, offsetof(struct thread_info, nvgprs_frame));
DEFINE(TI_TASK, offsetof(struct thread_info, task));
DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
MTMSRD(r10)
lwz r9,TI_FLAGS(r12)
li r8,-_LAST_ERRNO
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL)
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
bne- syscall_exit_work
cmplw 0,r3,r8
blt+ syscall_exit_cont
syscall_exit_work:
andi. r0,r9,_TIF_RESTOREALL
- bne- 2f
- cmplw 0,r3,r8
+ beq+ 0f
+ REST_NVGPRS(r1)
+ b 2f
+0: cmplw 0,r3,r8
blt+ 1f
andi. r0,r9,_TIF_NOERROR
bne- 1f
2: andi. r0,r9,(_TIF_PERSYSCALL_MASK)
beq 4f
- /* Clear per-syscall TIF flags if any are set, but _leave_
- _TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that
- yet. */
+ /* Clear per-syscall TIF flags if any are set. */
li r11,_TIF_PERSYSCALL_MASK
addi r12,r12,TI_FLAGS
subi r12,r12,TI_FLAGS
4: /* Anything which requires enabling interrupts? */
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS)
- beq 7f
+ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
+ beq ret_from_except
+
+ /* Re-enable interrupts */
+ ori r10,r10,MSR_EE
+ SYNC
+ MTMSRD(r10)
/* Save NVGPRS if they're not saved already */
lwz r4,TRAP(r1)
SAVE_NVGPRS(r1)
li r4,0xc00
stw r4,TRAP(r1)
-
- /* Re-enable interrupts */
-5: ori r10,r10,MSR_EE
- SYNC
- MTMSRD(r10)
-
- andi. r0,r9,_TIF_SAVE_NVGPRS
- bne save_user_nvgprs
-
-save_user_nvgprs_cont:
- andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
- beq 7f
-
+5:
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_syscall_trace_leave
- REST_NVGPRS(r1)
-
-6: lwz r3,GPR3(r1)
- LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
- SYNC
- MTMSRD(r10) /* disable interrupts again */
- rlwinm r12,r1,0,0,18 /* current_thread_info() */
- lwz r9,TI_FLAGS(r12)
-7:
- andi. r0,r9,_TIF_NEED_RESCHED
- bne 8f
- lwz r5,_MSR(r1)
- andi. r5,r5,MSR_PR
- beq ret_from_except
- andi. r0,r9,_TIF_SIGPENDING
- beq ret_from_except
- b do_user_signal
-8:
- ori r10,r10,MSR_EE
- SYNC
- MTMSRD(r10) /* re-enable interrupts */
- bl schedule
- b 6b
-
-save_user_nvgprs:
- lwz r8,TI_SIGFRAME(r12)
-
-.macro savewords start, end
- 1: stw \start,4*(\start)(r8)
- .section __ex_table,"a"
- .align 2
- .long 1b,save_user_nvgprs_fault
- .previous
- .if \end - \start
- savewords "(\start+1)",\end
- .endif
-.endm
- savewords 14,31
- b save_user_nvgprs_cont
-
-
-save_user_nvgprs_fault:
- li r3,11 /* SIGSEGV */
- lwz r4,TI_TASK(r12)
- bl force_sigsegv
+ b ret_from_except_full
- rlwinm r12,r1,0,0,18 /* current_thread_info() */
- lwz r9,TI_FLAGS(r12)
- b save_user_nvgprs_cont
-
#ifdef SHOW_SYSCALLS
do_show_syscall:
#ifdef SHOW_SYSCALLS_TASK
stw r0,TRAP(r1) /* register set saved */
b sys_clone
+ .globl ppc_swapcontext
+ppc_swapcontext:
+ SAVE_NVGPRS(r1)
+ lwz r0,TRAP(r1)
+ rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */
+ stw r0,TRAP(r1) /* register set saved */
+ b sys_swapcontext
+
/*
* Top-level page fault handling.
* This is in assembler because if do_page_fault tells us that
/* Check current_thread_info()->flags */
rlwinm r9,r1,0,0,18
lwz r9,TI_FLAGS(r9)
- andi. r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL)
+ andi. r0,r9,(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NEED_RESCHED)
bne do_work
restore_user:
* arch/s390/lib/spinlock.c
* Out of line spinlock code.
*
- * S390 version
- * Copyright (C) 2004 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright (C) IBM Corp. 2004, 2006
* Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
*/
_diag44();
count = spin_retry;
}
+ if (__raw_spin_is_locked(lp))
+ continue;
if (_raw_compare_and_swap(&lp->lock, 0, pc) == 0)
return;
}
int count = spin_retry;
while (count-- > 0) {
+ if (__raw_spin_is_locked(lp))
+ continue;
if (_raw_compare_and_swap(&lp->lock, 0, pc) == 0)
return 1;
}
_diag44();
count = spin_retry;
}
+ if (!__raw_read_can_lock(rw))
+ continue;
old = rw->lock & 0x7fffffffU;
if (_raw_compare_and_swap(&rw->lock, old, old + 1) == old)
return;
int count = spin_retry;
while (count-- > 0) {
+ if (!__raw_read_can_lock(rw))
+ continue;
old = rw->lock & 0x7fffffffU;
if (_raw_compare_and_swap(&rw->lock, old, old + 1) == old)
return 1;
_diag44();
count = spin_retry;
}
+ if (!__raw_write_can_lock(rw))
+ continue;
if (_raw_compare_and_swap(&rw->lock, 0, 0x80000000) == 0)
return;
}
int count = spin_retry;
while (count-- > 0) {
+ if (!__raw_write_can_lock(rw))
+ continue;
if (_raw_compare_and_swap(&rw->lock, 0, 0x80000000) == 0)
return 1;
}
0: srst %r2,%r1
jo 0b
sacf 0
- jh 1f # \0 found in string ?
ahi %r2,1 # strnlen_user result includes the \0
-1: slr %r2,%r3
+ # or return count+1 if \0 not found
+ slr %r2,%r3
br %r14
2: sacf 0
- lhi %r2,-EFAULT
+ slr %r2,%r2 # return 0 on exception
br %r14
.section __ex_table,"a"
.long 0b,2b
0: srst %r2,%r1
jo 0b
sacf 0
- jh 1f # \0 found in string ?
aghi %r2,1 # strnlen_user result includes the \0
-1: slgr %r2,%r3
+ # or return count+1 if \0 not found
+ slgr %r2,%r3
br %r14
2: sacf 0
- lghi %r2,-EFAULT
+ slgr %r2,%r2 # return 0 on exception
br %r14
.section __ex_table,"a"
.quad 0b,2b
endmenu
-source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
+#source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
-source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
+#source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
config SH_PCLK_FREQ
int "Peripheral clock frequency (in Hz)"
nop
nop
- .section __ex_table
+ .section __ex_table,"a"
.align 4
.word 1b, __retl_efault, 2b, __retl_efault
.word 3b, __retl_efault, 4b, __retl_efault
mov 0, %o0
.size __do_int_store, .-__do_int_store
- .section __ex_table
+ .section __ex_table,"a"
.word 4b, __retl_efault
.word 5b, __retl_efault
.word 6b, __retl_efault
mov 0, %o0
.size __do_int_load, .-__do_int_load
- .section __ex_table
+ .section __ex_table,"a"
.word 4b, __retl_efault
.word 5b, __retl_efault
.word 6b, __retl_efault
.align 4; \
99: retl; \
mov 1, %o0; \
- .section __ex_table; \
+ .section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
.text; \
.align 4; \
99: retl; \
mov 1, %o0; \
- .section __ex_table; \
+ .section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
.text; \
.align 4; \
99: retl; \
mov 1, %o0; \
- .section __ex_table; \
+ .section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
.text; \
.align 4; \
99: retl; \
mov 1, %o0; \
- .section __ex_table; \
+ .section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
.text; \
.align 4; \
99: retl; \
mov %o1, %o0; \
- .section __ex_table; \
+ .section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
.text; \
.align 4; \
99: retl; \
mov 1, %o0; \
- .section __ex_table; \
+ .section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
.text; \
.align 4; \
99: retl; \
mov -1, %o0; \
- .section __ex_table; \
+ .section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
.text; \
.align 4; \
99: retl; \
mov -1, %o0; \
- .section __ex_table; \
+ .section __ex_table,"a";\
.align 4; \
.word 98b, 99b; \
.text; \
retl
clr %o0
- .section __ex_table,#alloc
+ .section __ex_table,"a"
.align 4
.word 10b, 30b
add %o2, %o3, %o0
.size __strncpy_from_user, .-__strncpy_from_user
- .section __ex_table,#alloc
+ .section __ex_table,"a"
.align 4
.word 60b, __retl_efault
.word 61b, __retl_efault
ba,pt %xcc, ret_from_solaris
nop
- .section __ex_table,#alloc
+ .section __ex_table,"a"
.align 4
.word exen, exenf
#include <asm/system.h>
#include <asm/pgtable.h>
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
extern void ret_from_fork (void);
irq_exit();
}
-int __initdata unsync_tsc_on_multicluster;
-
/*
* oem_force_hpet_timer -- force HPET mode for some boxes.
*
* Thus far, the major user of this is IBM's Summit2 series:
*
- * Some clustered boxes may have unsynced TSC problems if they are
+ * Clustered boxes may have unsynced TSC problems if they are
* multi-chassis. Use available data to take a good guess.
* If in doubt, go HPET.
*/
unsigned id;
DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
- /* Only do this check on IBM machines - big Unisys systems
- use multiple clusters too, but have synchronized TSC */
- if (!unsync_tsc_on_multicluster)
- return 0;
-
bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
for (i = 0; i < NR_CPUS; i++) {
"\tmovl %0,%%ss\n"
"\tmovl %0,%%fs\n"
"\tmovl %0,%%gs\n"
- : : "a" (__KERNEL_DS)
+ : : "a" (__KERNEL_DS) : "memory"
);
}
bool
default y
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
source "init/Kconfig"
menu "Processor type and features"
struct task_struct *current_set[NR_CPUS] = {&init_task, };
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
#if XCHAL_CP_NUM > 0
CFQ_CFQQ_FLAG_fifo_expire,
CFQ_CFQQ_FLAG_idle_window,
CFQ_CFQQ_FLAG_prio_changed,
- CFQ_CFQQ_FLAG_expired,
};
#define CFQ_CFQQ_FNS(name) \
CFQ_CFQQ_FNS(fifo_expire);
CFQ_CFQQ_FNS(idle_window);
CFQ_CFQQ_FNS(prio_changed);
-CFQ_CFQQ_FNS(expired);
#undef CFQ_CFQQ_FNS
enum cfq_rq_state_flags {
*/
static inline void cfq_schedule_dispatch(struct cfq_data *cfqd)
{
- if (!cfqd->rq_in_driver && cfqd->busy_queues)
+ if (cfqd->busy_queues)
kblockd_schedule_work(&cfqd->unplug_work);
}
cfqq->slice_left = 0;
cfq_clear_cfqq_must_alloc_slice(cfqq);
cfq_clear_cfqq_fifo_expire(cfqq);
- cfq_clear_cfqq_expired(cfqq);
}
cfqd->active_queue = cfqq;
}
+/*
+ * current cfqq expired its slice (or was too idle), select new one
+ */
+static void
+__cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq,
+ int preempted)
+{
+ unsigned long now = jiffies;
+
+ if (cfq_cfqq_wait_request(cfqq))
+ del_timer(&cfqd->idle_slice_timer);
+
+ if (!preempted && !cfq_cfqq_dispatched(cfqq)) {
+ cfqq->service_last = now;
+ cfq_schedule_dispatch(cfqd);
+ }
+
+ cfq_clear_cfqq_must_dispatch(cfqq);
+ cfq_clear_cfqq_wait_request(cfqq);
+
+ /*
+ * store what was left of this slice, if the queue idled out
+ * or was preempted
+ */
+ if (time_after(cfqq->slice_end, now))
+ cfqq->slice_left = cfqq->slice_end - now;
+ else
+ cfqq->slice_left = 0;
+
+ if (cfq_cfqq_on_rr(cfqq))
+ cfq_resort_rr_list(cfqq, preempted);
+
+ if (cfqq == cfqd->active_queue)
+ cfqd->active_queue = NULL;
+
+ if (cfqd->active_cic) {
+ put_io_context(cfqd->active_cic->ioc);
+ cfqd->active_cic = NULL;
+ }
+
+ cfqd->dispatch_slice = 0;
+}
+
+static inline void cfq_slice_expired(struct cfq_data *cfqd, int preempted)
+{
+ struct cfq_queue *cfqq = cfqd->active_queue;
+
+ if (cfqq)
+ __cfq_slice_expired(cfqd, cfqq, preempted);
+}
+
/*
* 0
* 0,1
static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd)
{
- struct cfq_queue *cfqq;
-
- /*
- * if current queue is expired but not done with its requests yet,
- * wait for that to happen
- */
- if ((cfqq = cfqd->active_queue) != NULL) {
- if (cfq_cfqq_expired(cfqq) && cfq_cfqq_dispatched(cfqq))
- return NULL;
- }
+ struct cfq_queue *cfqq = NULL;
/*
* if current list is non-empty, grab first entry. if it is empty,
return cfqq;
}
-/*
- * current cfqq expired its slice (or was too idle), select new one
- */
-static void
-__cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq,
- int preempted)
-{
- unsigned long now = jiffies;
-
- if (cfq_cfqq_wait_request(cfqq))
- del_timer(&cfqd->idle_slice_timer);
-
- if (!preempted && !cfq_cfqq_dispatched(cfqq))
- cfqq->service_last = now;
-
- cfq_clear_cfqq_must_dispatch(cfqq);
- cfq_clear_cfqq_wait_request(cfqq);
-
- /*
- * store what was left of this slice, if the queue idled out
- * or was preempted
- */
- if (time_after(cfqq->slice_end, now))
- cfqq->slice_left = cfqq->slice_end - now;
- else
- cfqq->slice_left = 0;
-
- if (cfq_cfqq_on_rr(cfqq))
- cfq_resort_rr_list(cfqq, preempted);
-
- if (cfqq == cfqd->active_queue)
- cfqd->active_queue = NULL;
-
- if (cfqd->active_cic) {
- put_io_context(cfqd->active_cic->ioc);
- cfqd->active_cic = NULL;
- }
-
- cfqd->dispatch_slice = 0;
-}
-
-static inline void cfq_slice_expired(struct cfq_data *cfqd, int preempted)
-{
- struct cfq_queue *cfqq = cfqd->active_queue;
-
- if (cfqq) {
- /*
- * use deferred expiry, if there are requests in progress as
- * not to disturb the slice of the next queue
- */
- if (cfq_cfqq_dispatched(cfqq))
- cfq_mark_cfqq_expired(cfqq);
- else
- __cfq_slice_expired(cfqd, cfqq, preempted);
- }
-}
-
static int cfq_arm_slice_timer(struct cfq_data *cfqd, struct cfq_queue *cfqq)
{
+ unsigned long sl;
+
WARN_ON(!RB_EMPTY(&cfqq->sort_list));
WARN_ON(cfqq != cfqd->active_queue);
cfq_mark_cfqq_must_dispatch(cfqq);
cfq_mark_cfqq_wait_request(cfqq);
- if (!timer_pending(&cfqd->idle_slice_timer)) {
- unsigned long slice_left = min(cfqq->slice_end - 1, (unsigned long) cfqd->cfq_slice_idle);
-
- cfqd->idle_slice_timer.expires = jiffies + slice_left;
- add_timer(&cfqd->idle_slice_timer);
- }
-
+ sl = min(cfqq->slice_end - 1, (unsigned long) cfqd->cfq_slice_idle);
+ mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
return 1;
}
if (!cfqq)
goto new_queue;
- if (cfq_cfqq_expired(cfqq))
- goto new_queue;
-
/*
* slice has expired
*/
BUG_ON(cfqq->allocated[READ] + cfqq->allocated[WRITE]);
BUG_ON(cfq_cfqq_on_rr(cfqq));
- if (unlikely(cfqd->active_queue == cfqq)) {
+ if (unlikely(cfqd->active_queue == cfqq))
__cfq_slice_expired(cfqd, cfqq, 0);
- cfq_schedule_dispatch(cfqd);
- }
cfq_put_cfqd(cfqq->cfqd);
spin_lock(q->queue_lock);
- if (unlikely(cic->cfqq == cfqd->active_queue)) {
+ if (unlikely(cic->cfqq == cfqd->active_queue))
__cfq_slice_expired(cfqd, cic->cfqq, 0);
- cfq_schedule_dispatch(cfqd);
- }
cfq_put_queue(cic->cfqq);
cic->cfqq = NULL;
cfqq->service_last = now;
cfq_resort_rr_list(cfqq, 0);
}
- if (cfq_cfqq_expired(cfqq)) {
- __cfq_slice_expired(cfqd, cfqq, 0);
- cfq_schedule_dispatch(cfqd);
- }
+ cfq_schedule_dispatch(cfqd);
}
if (cfq_crq_is_sync(crq))
* Different hardware can have different requirements as to what pages
* it can do I/O directly to. A low level driver can call
* blk_queue_bounce_limit to have lower memory pages allocated as bounce
- * buffers for doing I/O to pages residing above @page. By default
- * the block layer sets this to the highest numbered "low" memory page.
+ * buffers for doing I/O to pages residing above @page.
**/
void blk_queue_bounce_limit(request_queue_t *q, u64 dma_addr)
{
unsigned long bounce_pfn = dma_addr >> PAGE_SHIFT;
-
- /*
- * set appropriate bounce gfp mask -- unfortunately we don't have a
- * full 4GB zone, so we have to resort to low memory for any bounces.
- * ISA has its own < 16MB zone.
- */
- if (bounce_pfn < blk_max_low_pfn) {
- BUG_ON(dma_addr < BLK_BOUNCE_ISA);
+ int dma = 0;
+
+ q->bounce_gfp = GFP_NOIO;
+#if BITS_PER_LONG == 64
+ /* Assume anything <= 4GB can be handled by IOMMU.
+ Actually some IOMMUs can handle everything, but I don't
+ know of a way to test this here. */
+ if (bounce_pfn < (0xffffffff>>PAGE_SHIFT))
+ dma = 1;
+ q->bounce_pfn = max_low_pfn;
+#else
+ if (bounce_pfn < blk_max_low_pfn)
+ dma = 1;
+ q->bounce_pfn = bounce_pfn;
+#endif
+ if (dma) {
init_emergency_isa_pool();
q->bounce_gfp = GFP_NOIO | GFP_DMA;
- } else
- q->bounce_gfp = GFP_NOIO;
-
- q->bounce_pfn = bounce_pfn;
+ q->bounce_pfn = bounce_pfn;
+ }
}
EXPORT_SYMBOL(blk_queue_bounce_limit);
}
-static int __init
+static int __devinit
fore200e_pca_map(struct fore200e* fore200e)
{
DPRINTK(2, "device %s being mapped in memory\n", fore200e->name);
}
-static int __init
+static int __devinit
fore200e_pca_configure(struct fore200e* fore200e)
{
struct pci_dev* pci_dev = (struct pci_dev*)fore200e->bus_dev;
}
-static int __init
+static int __devinit
fore200e_irq_request(struct fore200e* fore200e)
{
if (request_irq(fore200e->irq, fore200e_interrupt, SA_SHIRQ, fore200e->name, fore200e->atm_dev) < 0) {
}
-static int __init
+static int __devinit
fore200e_get_esi(struct fore200e* fore200e)
{
struct prom_data* prom = fore200e_kmalloc(sizeof(struct prom_data), GFP_KERNEL | GFP_DMA);
}
-static int __init
+static int __devinit
fore200e_alloc_rx_buf(struct fore200e* fore200e)
{
int scheme, magn, nbr, size, i;
}
-static int __init
+static int __devinit
fore200e_init_bs_queue(struct fore200e* fore200e)
{
int scheme, magn, i;
}
-static int __init
+static int __devinit
fore200e_init_rx_queue(struct fore200e* fore200e)
{
struct host_rxq* rxq = &fore200e->host_rxq;
}
-static int __init
+static int __devinit
fore200e_init_tx_queue(struct fore200e* fore200e)
{
struct host_txq* txq = &fore200e->host_txq;
}
-static int __init
+static int __devinit
fore200e_init_cmd_queue(struct fore200e* fore200e)
{
struct host_cmdq* cmdq = &fore200e->host_cmdq;
}
-static int __init
+static int __devinit
fore200e_initialize(struct fore200e* fore200e)
{
struct cp_queues __iomem * cpq;
}
-static void __init
+static void __devinit
fore200e_monitor_putc(struct fore200e* fore200e, char c)
{
struct cp_monitor __iomem * monitor = fore200e->cp_monitor;
}
-static int __init
+static int __devinit
fore200e_monitor_getc(struct fore200e* fore200e)
{
struct cp_monitor __iomem * monitor = fore200e->cp_monitor;
}
-static void __init
+static void __devinit
fore200e_monitor_puts(struct fore200e* fore200e, char* str)
{
while (*str) {
}
-static int __init
+static int __devinit
fore200e_start_fw(struct fore200e* fore200e)
{
int ok;
}
-static int __init
+static int __devinit
fore200e_load_fw(struct fore200e* fore200e)
{
u32* fw_data = (u32*) fore200e->bus->fw_data;
}
-static int __init
+static int __devinit
fore200e_register(struct fore200e* fore200e)
{
struct atm_dev* atm_dev;
}
-static int __init
+static int __devinit
fore200e_init(struct fore200e* fore200e)
{
if (fore200e_register(fore200e) < 0)
return -EBUSY;
fore200e_supply(fore200e);
-
+
/* all done, board initialization is now complete */
fore200e->state = FORE200E_STATE_COMPLETE;
return 0;
#include <linux/timer.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/random.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include "DAC960.h"
Command->SegmentCount, Command->DmaDirection);
if (!end_that_request_first(Request, UpToDate, Command->BlockCount)) {
-
+ add_disk_randomness(Request->rq_disk);
end_that_request_last(Request, UpToDate);
if (Command->Completion) {
rng_hw_none,
rng_hw_intel,
rng_hw_amd,
+#ifdef __i386__
rng_hw_via,
+#endif
rng_hw_geode,
};
cnodeid_t node, maxn = -1;
if (!ia64_platform_is("sn2"))
- return -1;
+ return 0;
/*
* Sanity check the cycles/sec variable
*
* (C) 2000,2001,2002,2003,2004 Omnikey AG
*
- * (C) 2005 Harald Welte <laforge@gnumonks.org>
+ * (C) 2005-2006 Harald Welte <laforge@gnumonks.org>
* - Adhere to Kernel CodingStyle
* - Port to 2.6.13 "new" style PCMCIA
* - Check for copy_{from,to}_user return values
* - Use nonseekable_open()
+ * - add class interface for udev device creation
*
* All rights reserved. Licensed under dual BSD/GPL license.
*/
#else
#define DEBUGP(n, rdr, x, args...)
#endif
-static char *version = "cm4000_cs.c v2.4.0gm5 - All bugs added by Harald Welte";
+static char *version = "cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte";
#define T_1SEC (HZ)
#define T_10MSEC msecs_to_jiffies(10)
/*queue*/ 4*sizeof(wait_queue_head_t))
static dev_link_t *dev_table[CM4000_MAX_DEV];
+static struct class *cmm_class;
/* This table doesn't use spaces after the comma between fields and thus
* violates CodingStyle. However, I don't really think wrapping it around will
link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
cm4000_config(link, i);
+ class_device_create(cmm_class, NULL, MKDEV(major, i), NULL,
+ "cmm%d", i);
+
return 0;
}
dev_table[devno] = NULL;
kfree(dev);
+ class_device_destroy(cmm_class, MKDEV(major, devno));
+
return;
}
static int __init cmm_init(void)
{
+ int rc;
+
printk(KERN_INFO "%s\n", version);
- pcmcia_register_driver(&cm4000_driver);
+
+ cmm_class = class_create(THIS_MODULE, "cardman_4000");
+ if (!cmm_class)
+ return -1;
+
+ rc = pcmcia_register_driver(&cm4000_driver);
+ if (rc < 0)
+ return rc;
+
major = register_chrdev(0, DEVICE_NAME, &cm4000_fops);
if (major < 0) {
printk(KERN_WARNING MODULE_NAME
printk(KERN_INFO MODULE_NAME ": unloading\n");
pcmcia_unregister_driver(&cm4000_driver);
unregister_chrdev(major, DEVICE_NAME);
+ class_destroy(cmm_class);
};
module_init(cmm_init);
*
* (c) 2000-2004 Omnikey AG (http://www.omnikey.com/)
*
- * (C) 2005 Harald Welte <laforge@gnumonks.org>
+ * (C) 2005-2006 Harald Welte <laforge@gnumonks.org>
* - add support for poll()
* - driver cleanup
* - add waitqueues
* - adhere to linux kernel coding style and policies
* - support 2.6.13 "new style" pcmcia interface
+ * - add class interface for udev device creation
*
* The device basically is a USB CCID compliant device that has been
* attached to an I/O-Mapped FIFO.
#endif
static char *version =
-"OMNIKEY CardMan 4040 v1.1.0gm4 - All bugs added by Harald Welte";
+"OMNIKEY CardMan 4040 v1.1.0gm5 - All bugs added by Harald Welte";
#define CCID_DRIVER_BULK_DEFAULT_TIMEOUT (150*HZ)
#define CCID_DRIVER_ASYNC_POWERUP_TIMEOUT (35*HZ)
static void reader_release(dev_link_t *link);
static int major;
+static struct class *cmx_class;
#define BS_READABLE 0x01
#define BS_WRITABLE 0x02
link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
reader_config(link, i);
+ class_device_create(cmx_class, NULL, MKDEV(major, i), NULL,
+ "cmx%d", i);
+
return 0;
}
dev_table[devno] = NULL;
kfree(dev);
+ class_device_destroy(cmx_class, MKDEV(major, devno));
+
return;
}
static int __init cm4040_init(void)
{
+ int rc;
+
printk(KERN_INFO "%s\n", version);
- pcmcia_register_driver(&reader_driver);
+ cmx_class = class_create(THIS_MODULE, "cardman_4040");
+ if (!cmx_class)
+ return -1;
+
+ rc = pcmcia_register_driver(&reader_driver);
+ if (rc < 0)
+ return rc;
+
major = register_chrdev(0, DEVICE_NAME, &reader_fops);
if (major < 0) {
printk(KERN_WARNING MODULE_NAME
printk(KERN_INFO MODULE_NAME ": unloading\n");
pcmcia_unregister_driver(&reader_driver);
unregister_chrdev(major, DEVICE_NAME);
+ class_destroy(cmx_class);
}
module_init(cm4040_init);
sx_dprintk (SX_DEBUG_RECEIVE, "rxop=%d, c = %d.\n", rx_op, c);
+ /* Don't copy past the end of the hardware receive buffer */
+ if (rx_op + c > 0x100) c = 0x100 - rx_op;
+
+ sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
+
/* Don't copy more bytes than there is room for in the buffer */
c = tty_prepare_flip_string(tty, &rp, c);
sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
- /* Don't copy past the end of the hardware receive buffer */
- if (rx_op + c > 0x100) c = 0x100 - rx_op;
-
- sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
-
/* If for one reason or another, we can't copy more data, we're done! */
if (c == 0) break;
int tx_active;
unsigned char signals; /* serial signal states */
- unsigned int init_error; /* initialization error */
+ int init_error; /* initialization error */
unsigned char *tx_buf;
int tx_count;
t->commit = 0;
t->read = 0;
/* DEBUG ONLY */
- memset(t->data, '*', size);
+/* memset(t->data, '*', size); */
/* printk("Flip recycle %p\n", t); */
return t;
}
# $Id: Kconfig,v 1.4.2.7 2005/07/08 22:05:38 dsp_llnl Exp $
#
-menu 'EDAC - error detection and reporting (RAS)'
+menu 'EDAC - error detection and reporting (RAS) (EXPERIMENTAL)'
config EDAC
- tristate "EDAC core system error reporting"
- depends on X86
+ tristate "EDAC core system error reporting (EXPERIMENTAL)"
+ depends on X86 && EXPERIMENTAL
help
EDAC is designed to report errors in the core system.
These are low-level errors that are reported in the CPU or
supporting chipset: memory errors, cache errors, PCI errors,
thermal throttling, etc.. If unsure, select 'Y'.
+ If this code is reporting problems on your system, please
+ see the EDAC project web pages for more information at:
+
+ <http://bluesmoke.sourceforge.net/>
+
+ and:
+
+ <http://buttersideup.com/edacwiki>
+
+ There is also a mailing list for the EDAC project, which can
+ be found via the sourceforge page.
+
comment "Reporting subsystems"
depends on EDAC
#define EDAC_MC_VERSION "edac_mc Ver: 2.0.0 " __DATE__
+/* For now, disable the EDAC sysfs code. The sysfs interface that EDAC
+ * presents to user space needs more thought, and is likely to change
+ * substantially.
+ */
+#define DISABLE_EDAC_SYSFS
+
#ifdef CONFIG_EDAC_DEBUG
/* Values of 0 to 4 will generate output */
int edac_debug_level = 1;
/* EDAC Controls, setable by module parameter, and sysfs */
static int log_ue = 1;
static int log_ce = 1;
-static int panic_on_ue = 1;
+static int panic_on_ue;
static int poll_msec = 1000;
static int check_pci_parity = 0; /* default YES check PCI parity */
/* START sysfs data and methods */
+#ifndef DISABLE_EDAC_SYSFS
+
static const char *mem_types[] = {
[MEM_EMPTY] = "Empty",
[MEM_RESERVED] = "Reserved",
* /sys/devices/system/edac/mc;
* data structures and methods
*/
+#if 0
static ssize_t memctrl_string_show(void *ptr, char *buffer)
{
char *value = (char*) ptr;
return sprintf(buffer, "%s\n", value);
}
+#endif
static ssize_t memctrl_int_show(void *ptr, char *buffer)
{
};
/* cwrow<id> attribute f*/
+#if 0
MEMCTRL_STRING_ATTR(mc_version,EDAC_MC_VERSION,S_IRUGO,memctrl_string_show,NULL);
+#endif
/* csrow<id> control files */
MEMCTRL_ATTR(panic_on_ue,S_IRUGO|S_IWUSR,memctrl_int_show,memctrl_int_store);
&attr_log_ue,
&attr_log_ce,
&attr_poll_msec,
- &attr_mc_version,
NULL,
};
.default_attrs = (struct attribute **) memctrl_attr,
};
+#endif /* DISABLE_EDAC_SYSFS */
/* Initialize the main sysfs entries for edac:
* /sys/devices/system/edac
* !0 FAILURE
*/
static int edac_sysfs_memctrl_setup(void)
+#ifdef DISABLE_EDAC_SYSFS
+{
+ return 0;
+}
+#else
{
int err=0;
return err;
}
+#endif /* DISABLE_EDAC_SYSFS */
/*
* MC teardown:
*/
static void edac_sysfs_memctrl_teardown(void)
{
+#ifndef DISABLE_EDAC_SYSFS
debugf0("MC: " __FILE__ ": %s()\n", __func__);
/* Unregister the MC's kobject */
/* Unregister the 'edac' object */
sysdev_class_unregister(&edac_class);
+#endif /* DISABLE_EDAC_SYSFS */
}
+#ifndef DISABLE_EDAC_SYSFS
+
/*
* /sys/devices/system/edac/pci;
* data structures and methods
int *count;
};
+
+#if 0
/* Output the list as: vendor_id:device:id<,vendor_id:device_id> */
static ssize_t edac_pci_list_string_show(void *ptr, char *buffer)
{
return count;
}
+#endif
static ssize_t edac_pci_int_show(void *ptr, char *buffer)
{
int *value = ptr;
.store = _store, \
};
+#if 0
static struct list_control pci_whitelist_control = {
.list = pci_whitelist,
.count = &pci_whitelist_count
S_IRUGO|S_IWUSR,
edac_pci_list_string_show,
edac_pci_list_string_store);
+#endif
/* PCI Parity control files */
EDAC_PCI_ATTR(check_pci_parity,S_IRUGO|S_IWUSR,edac_pci_int_show,edac_pci_int_store);
&edac_pci_attr_check_pci_parity,
&edac_pci_attr_panic_on_pci_parity,
&edac_pci_attr_pci_parity_count,
- &edac_pci_attr_pci_parity_whitelist,
- &edac_pci_attr_pci_parity_blacklist,
NULL,
};
.default_attrs = (struct attribute **) edac_pci_attr,
};
+#endif /* DISABLE_EDAC_SYSFS */
+
/**
* edac_sysfs_pci_setup()
*
*/
static int edac_sysfs_pci_setup(void)
+#ifdef DISABLE_EDAC_SYSFS
+{
+ return 0;
+}
+#else
{
int err;
}
return err;
}
-
+#endif /* DISABLE_EDAC_SYSFS */
static void edac_sysfs_pci_teardown(void)
{
+#ifndef DISABLE_EDAC_SYSFS
debugf0("MC: " __FILE__ ": %s()\n", __func__);
kobject_unregister(&edac_pci_kobj);
kobject_put(&edac_pci_kobj);
+#endif
}
+#ifndef DISABLE_EDAC_SYSFS
+
/* EDAC sysfs CSROW data structures and methods */
/* Set of more detailed csrow<id> attribute show/store functions */
.default_attrs = (struct attribute **) mci_attr,
};
+#endif /* DISABLE_EDAC_SYSFS */
+
#define EDAC_DEVICE_SYMLINK "device"
/*
* !0 Failure
*/
static int edac_create_sysfs_mci_device(struct mem_ctl_info *mci)
+#ifdef DISABLE_EDAC_SYSFS
+{
+ return 0;
+}
+#else
{
int i;
int err;
return err;
}
+#endif /* DISABLE_EDAC_SYSFS */
/*
* remove a Memory Controller instance
*/
static void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci)
{
+#ifndef DISABLE_EDAC_SYSFS
int i;
debugf0("MC: " __FILE__ ": %s()\n", __func__);
kobject_unregister(&mci->edac_mci_kobj);
kobject_put(&mci->edac_mci_kobj);
+#endif /* DISABLE_EDAC_SYSFS */
}
/* END OF sysfs data and methods */
#include "dcdbas.h"
#define DRIVER_NAME "dcdbas"
-#define DRIVER_VERSION "5.6.0-1"
+#define DRIVER_VERSION "5.6.0-2"
#define DRIVER_DESCRIPTION "Dell Systems Management Base Driver"
static struct platform_device *dcdbas_pdev;
*/
static void __exit dcdbas_exit(void)
{
- platform_device_unregister(dcdbas_pdev);
+ /*
+ * make sure functions that use dcdbas_pdev are called
+ * before platform_device_unregister
+ */
unregister_reboot_notifier(&dcdbas_reboot_nb);
smi_data_buf_free();
+ platform_device_unregister(dcdbas_pdev);
}
module_init(dcdbas_init);
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
+ PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
if (i == ISO_CHANNELS) {
PRINT(KERN_ERR, ohci->host->id,
"No free channel found");
- return EAGAIN;
+ return -EAGAIN;
}
if (!(ohci->ISO_channel_usage & mask)) {
v.channel = i;
spin_lock_irq(target->scsi_host->host_lock);
+ if (target->state == SRP_TARGET_DEAD ||
+ target->state == SRP_TARGET_REMOVED) {
+ scmnd->result = DID_BAD_TARGET << 16;
+ goto out;
+ }
+
if (scmnd->host_scribble == (void *) -1L)
goto out;
module_param_named(resetafter, psmouse_resetafter, uint, 0644);
MODULE_PARM_DESC(resetafter, "Reset device after so many bad packets (0 = never).");
-static unsigned int psmouse_resync_time = 5;
+static unsigned int psmouse_resync_time;
module_param_named(resync_time, psmouse_resync_time, uint, 0644);
MODULE_PARM_DESC(resync_time, "How long can mouse stay idle before forcing resync (in seconds, 0 = never).");
{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00B, PCI_ANY_ID, PCI_ANY_ID},
{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00C, PCI_ANY_ID, PCI_ANY_ID},
{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B100, PCI_ANY_ID, PCI_ANY_ID},
+ {PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B700, PCI_ANY_ID, PCI_ANY_ID},
+ {PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B701, PCI_ANY_ID, PCI_ANY_ID},
{PCI_VENDOR_ID_ABOCOM, PCI_DEVICE_ID_ABOCOM_2BD1, PCI_ANY_ID, PCI_ANY_ID},
{PCI_VENDOR_ID_ASUSTEK, PCI_DEVICE_ID_ASUSTEK_0675, PCI_ANY_ID, PCI_ANY_ID},
{PCI_VENDOR_ID_BERKOM, PCI_DEVICE_ID_BERKOM_T_CONCEPT, PCI_ANY_ID, PCI_ANY_ID},
{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00B, "Billion", "B00B"},
{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00C, "Billion", "B00C"},
{PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B100, "Seyeon", "B100"},
+ {PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B700, "Primux II S0", "B700"},
+ {PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B701, "Primux II S0 NT", "B701"},
{PCI_VENDOR_ID_ABOCOM, PCI_DEVICE_ID_ABOCOM_2BD1, "Abocom/Magitek", "2BD1"},
{PCI_VENDOR_ID_ASUSTEK, PCI_DEVICE_ID_ASUSTEK_0675, "Asuscom/Askey", "675"},
{PCI_VENDOR_ID_BERKOM, PCI_DEVICE_ID_BERKOM_T_CONCEPT, "German telekom", "T-Concept"},
/*
* hfc_usb.c
*
- * $Id: hfc_usb.c,v 4.36 2005/04/08 09:55:13 martinb1 Exp $
+ * $Id: hfc_usb.c,v 2.3.2.13 2006/02/17 17:17:22 mbachem Exp $
*
* modular HiSax ISDN driver for Colognechip HFC-S USB chip
*
#include "hfc_usb.h"
static const char *hfcusb_revision =
- "$Revision: 4.36 $ $Date: 2005/04/08 09:55:13 $ ";
+ "$Revision: 2.3.2.13 $ $Date: 2006/02/17 17:17:22 $ ";
/* Hisax debug support
* use "modprobe debug=x" where x is bitfield of USB_DBG & ISDN_DBG
for (i = 0; list[i].name != NULL; i++)
if (list[i].num == num)
return (list[i].name);
- return "<unkown ERROR>";
+ return "<unknown ERROR>";
}
hfc->ctrl_urb->transfer_buffer = NULL;
hfc->ctrl_urb->transfer_buffer_length = 0;
hfc->ctrl_write.wIndex =
- hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg;
+ cpu_to_le16(hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg);
hfc->ctrl_write.wValue =
- hfc->ctrl_buff[hfc->ctrl_out_idx].reg_val;
+ cpu_to_le16(hfc->ctrl_buff[hfc->ctrl_out_idx].reg_val);
usb_submit_urb(hfc->ctrl_urb, GFP_ATOMIC); /* start transfer */
}
/* init the background machinery for control requests */
hfc->ctrl_read.bRequestType = 0xc0;
hfc->ctrl_read.bRequest = 1;
- hfc->ctrl_read.wLength = 1;
+ hfc->ctrl_read.wLength = cpu_to_le16(1);
hfc->ctrl_write.bRequestType = 0x40;
hfc->ctrl_write.bRequest = 0;
hfc->ctrl_write.wLength = 0;
vend_idx = 0xffff;
for (i = 0; hfcusb_idtab[i].idVendor; i++) {
- if (dev->descriptor.idVendor == hfcusb_idtab[i].idVendor
- && dev->descriptor.idProduct ==
- hfcusb_idtab[i].idProduct) {
+ if ((le16_to_cpu(dev->descriptor.idVendor) == hfcusb_idtab[i].idVendor)
+ && (le16_to_cpu(dev->descriptor.idProduct) == hfcusb_idtab[i].idProduct)) {
vend_idx = i;
continue;
}
usb_transfer_mode
= USB_INT;
packet_size =
- ep->desc.
- wMaxPacketSize;
+ le16_to_cpu(ep->desc.wMaxPacketSize);
break;
case USB_ENDPOINT_XFER_BULK:
if (ep_addr & 0x80)
usb_transfer_mode
= USB_BULK;
packet_size =
- ep->desc.
- wMaxPacketSize;
+ le16_to_cpu(ep->desc.wMaxPacketSize);
break;
case USB_ENDPOINT_XFER_ISOC:
if (ep_addr & 0x80)
usb_transfer_mode
= USB_ISOC;
iso_packet_size =
- ep->desc.
- wMaxPacketSize;
+ le16_to_cpu(ep->desc.wMaxPacketSize);
break;
default:
context->
fifonum = cidx;
context->fifos[cidx].hfc =
context;
- context->fifos[cidx].
- usb_packet_maxlen =
- ep->desc.
- wMaxPacketSize;
+ context->fifos[cidx].usb_packet_maxlen =
+ le16_to_cpu(ep->desc.wMaxPacketSize);
context->fifos[cidx].
intervall =
ep->desc.bInterval;
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_close after info->count != 0\n");
#endif
+ module_put(info->owner);
return;
}
info->flags |= ISDN_ASYNC_CLOSING;
p += sprintf(p, "PMU driver version : %d\n", PMU_DRIVER_VERSION);
p += sprintf(p, "PMU firmware version : %02x\n", pmu_version);
p += sprintf(p, "AC Power : %d\n",
- ((pmu_power_flags & PMU_PWR_AC_PRESENT) != 0));
+ ((pmu_power_flags & PMU_PWR_AC_PRESENT) != 0) || pmu_battery_count == 0);
p += sprintf(p, "Battery count : %d\n", pmu_battery_count);
return p - page;
#include <linux/platform_device.h>
#include <linux/mutex.h>
+#include <asm/prom.h>
+
#include "windfarm.h"
#define VERSION "0.2"
{
DBG("wf: core loaded\n");
+ /* Don't register on old machines that use therm_pm72 for now */
+ if (machine_is_compatible("PowerMac7,2") ||
+ machine_is_compatible("PowerMac7,3") ||
+ machine_is_compatible("RackMac3,1"))
+ return -ENODEV;
platform_device_register(&wf_platform_device);
return 0;
}
#include <linux/wait.h>
#include <linux/cpufreq.h>
+#include <asm/prom.h>
+
#include "windfarm.h"
#define VERSION "0.3"
{
struct wf_control *clamp;
+ /* Don't register on old machines that use therm_pm72 for now */
+ if (machine_is_compatible("PowerMac7,2") ||
+ machine_is_compatible("PowerMac7,3") ||
+ machine_is_compatible("RackMac3,1"))
+ return -ENODEV;
+
clamp = kmalloc(sizeof(struct wf_control), GFP_KERNEL);
if (clamp == NULL)
return -ENOMEM;
#include "windfarm.h"
-#define VERSION "0.1"
+#define VERSION "0.2"
#undef DEBUG
const char *loc)
{
struct wf_lm75_sensor *lm;
+ int rc;
DBG("wf_lm75: creating %s device at address 0x%02x\n",
ds1775 ? "ds1775" : "lm75", addr);
lm->i2c.driver = &wf_lm75_driver;
strncpy(lm->i2c.name, lm->sens.name, I2C_NAME_SIZE-1);
- if (i2c_attach_client(&lm->i2c)) {
- printk(KERN_ERR "windfarm: failed to attach %s %s to i2c\n",
- ds1775 ? "ds1775" : "lm75", lm->i2c.name);
+ rc = i2c_attach_client(&lm->i2c);
+ if (rc) {
+ printk(KERN_ERR "windfarm: failed to attach %s %s to i2c,"
+ " err %d\n", ds1775 ? "ds1775" : "lm75",
+ lm->i2c.name, rc);
goto fail;
}
(dev = of_get_next_child(busnode, dev)) != NULL;) {
const char *loc =
get_property(dev, "hwsensor-location", NULL);
- u32 *reg = (u32 *)get_property(dev, "reg", NULL);
- DBG(" dev: %s... (loc: %p, reg: %p)\n", dev->name, loc, reg);
- if (loc == NULL || reg == NULL)
+ u8 addr;
+
+ /* We must re-match the adapter in order to properly check
+ * the channel on multibus setups
+ */
+ if (!pmac_i2c_match_adapter(dev, adapter))
+ continue;
+ addr = pmac_i2c_get_dev_addr(dev);
+ if (loc == NULL || addr == 0)
continue;
/* real lm75 */
if (device_is_compatible(dev, "lm75"))
- wf_lm75_create(adapter, *reg, 0, loc);
+ wf_lm75_create(adapter, addr, 0, loc);
/* ds1775 (compatible, better resolution */
else if (device_is_compatible(dev, "ds1775"))
- wf_lm75_create(adapter, *reg, 1, loc);
+ wf_lm75_create(adapter, addr, 1, loc);
}
return 0;
}
static int __init wf_lm75_sensor_init(void)
{
+ /* Don't register on old machines that use therm_pm72 for now */
+ if (machine_is_compatible("PowerMac7,2") ||
+ machine_is_compatible("PowerMac7,3") ||
+ machine_is_compatible("RackMac3,1"))
+ return -ENODEV;
return i2c_add_driver(&wf_lm75_driver);
}
#include "windfarm.h"
-#define VERSION "0.1"
+#define VERSION "0.2"
/* This currently only exports the external temperature sensor,
since that's all the control loops need. */
static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr)
{
struct wf_6690_sensor *max;
- char *name = "u4-temp";
+ char *name = "backside-temp";
max = kzalloc(sizeof(struct wf_6690_sensor), GFP_KERNEL);
if (max == NULL) {
struct device_node *busnode, *dev = NULL;
struct pmac_i2c_bus *bus;
const char *loc;
- u32 *reg;
bus = pmac_i2c_adapter_to_bus(adapter);
if (bus == NULL)
busnode = pmac_i2c_get_bus_node(bus);
while ((dev = of_get_next_child(busnode, dev)) != NULL) {
+ u8 addr;
+
+ /* We must re-match the adapter in order to properly check
+ * the channel on multibus setups
+ */
+ if (!pmac_i2c_match_adapter(dev, adapter))
+ continue;
if (!device_is_compatible(dev, "max6690"))
continue;
+ addr = pmac_i2c_get_dev_addr(dev);
loc = get_property(dev, "hwsensor-location", NULL);
- reg = (u32 *) get_property(dev, "reg", NULL);
- if (!loc || !reg)
+ if (loc == NULL || addr == 0)
continue;
- printk("found max6690, loc=%s reg=%x\n", loc, *reg);
+ printk("found max6690, loc=%s addr=0x%02x\n", loc, addr);
if (strcmp(loc, "BACKSIDE"))
continue;
- wf_max6690_create(adapter, *reg);
+ wf_max6690_create(adapter, addr);
}
return 0;
static int __init wf_max6690_sensor_init(void)
{
+ /* Don't register on old machines that use therm_pm72 for now */
+ if (machine_is_compatible("PowerMac7,2") ||
+ machine_is_compatible("PowerMac7,3") ||
+ machine_is_compatible("RackMac3,1"))
+ return -ENODEV;
return i2c_add_driver(&wf_max6690_driver);
}
return st->target;
}
EXPORT_SYMBOL_GPL(wf_cpu_pid_run);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("PID algorithm for PowerMacs thermal control");
+MODULE_LICENSE("GPL");
return;
if (!backside_tick) {
/* first time; initialize things */
+ printk(KERN_INFO "windfarm: Backside control loop started.\n");
backside_param.min = backside_fan->ops->get_min(backside_fan);
backside_param.max = backside_fan->ops->get_max(backside_fan);
wf_pid_init(&backside_pid, &backside_param);
return;
if (!drive_bay_tick) {
/* first time; initialize things */
+ printk(KERN_INFO "windfarm: Drive bay control loop started.\n");
drive_bay_prm.min = drive_bay_fan->ops->get_min(drive_bay_fan);
drive_bay_prm.max = drive_bay_fan->ops->get_max(drive_bay_fan);
wf_pid_init(&drive_bay_pid, &drive_bay_prm);
return;
if (!slots_started) {
/* first time; initialize things */
+ printk(KERN_INFO "windfarm: Slots control loop started.\n");
wf_pid_init(&slots_pid, &slots_param);
slots_started = 1;
}
if (!started) {
started = 1;
+ printk(KERN_INFO "windfarm: CPUs control loops started.\n");
for (i = 0; i < nr_cores; ++i) {
if (create_cpu_loop(i) < 0) {
failure_state = FAILURE_PERM;
{
unsigned int i;
- if (have_all_sensors)
- return;
if (!strncmp(sr->name, "cpu-temp-", 9)) {
i = sr->name[9] - '0';
if (sr->name[10] == 0 && i < NR_CORES &&
} else if (!strcmp(sr->name, "slots-power")) {
if (slots_power == NULL && wf_get_sensor(sr) == 0)
slots_power = sr;
- } else if (!strcmp(sr->name, "u4-temp")) {
+ } else if (!strcmp(sr->name, "backside-temp")) {
if (u4_temp == NULL && wf_get_sensor(sr) == 0)
u4_temp = sr;
} else
return -EINVAL;
}
+ if (((uint32_t)ti->len) & (chunk_size - 1)) {
+ ti->error = "dm-stripe: Target length not divisible by "
+ "chunk size";
+ return -EINVAL;
+ }
+
width = ti->len;
if (sector_div(width, stripes)) {
- ti->error = "dm-stripe: Target length not divisable by "
+ ti->error = "dm-stripe: Target length not divisible by "
"number of stripes";
return -EINVAL;
}
r1bio_t * r1_bio = (r1bio_t *)(bio->bi_private);
int mirror, behind = test_bit(R1BIO_BehindIO, &r1_bio->state);
conf_t *conf = mddev_to_conf(r1_bio->mddev);
+ struct bio *to_put = NULL;
if (bio->bi_size)
return 1;
* this branch is our 'one mirror IO has finished' event handler:
*/
r1_bio->bios[mirror] = NULL;
+ to_put = bio;
if (!uptodate) {
md_error(r1_bio->mddev, conf->mirrors[mirror].rdev);
/* an I/O failed, we can't clear the bitmap */
/* Don't dec_pending yet, we want to hold
* the reference over the retry
*/
- return 0;
+ goto out;
}
if (test_bit(R1BIO_BehindIO, &r1_bio->state)) {
/* free extra copy of the data pages */
raid_end_bio_io(r1_bio);
}
- if (r1_bio->bios[mirror]==NULL)
- bio_put(bio);
-
rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev);
+ out:
+ if (to_put)
+ bio_put(to_put);
+
return 0;
}
atomic_set(&r1_bio->remaining, 0);
atomic_set(&r1_bio->behind_remaining, 0);
- do_barriers = bio->bi_rw & BIO_RW_BARRIER;
+ do_barriers = bio_barrier(bio);
if (do_barriers)
set_bit(R1BIO_Barrier, &r1_bio->state);
info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
} else
/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
- if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
+ if ((fc->fe = vp310_mt312_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
ops = fc->fe->ops;
ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
EXPORT_SYMBOL(bt878_device_control);
-struct cards card_list[] __devinitdata = {
+static struct cards card_list[] __devinitdata = {
{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
{ 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
*/
-struct dst_types dst_tlist[] = {
+static struct dst_types dst_tlist[] = {
{
.device_id = "200103A",
.offset = 0,
/*--------------------------------------------------------------------------*/
/*
- * Flags OR'ed in the capabilites field of struct dmx_demux.
+ * Flags OR'ed in the capabilities field of struct dmx_demux.
*/
#define DMX_TS_FILTERING 1
.pll_set = dvb_usb_pll_set_i2c,
};
-static struct lgdt330x_config cxusb_lgdt330x_config = {
+static struct lgdt330x_config cxusb_lgdt3303_config = {
.demod_address = 0x0e,
.demod_chip = LGDT3303,
.pll_set = dvb_usb_pll_set_i2c,
return -EIO;
}
-static int cxusb_lgdt330x_frontend_attach(struct dvb_usb_device *d)
+static int cxusb_lgdt3303_frontend_attach(struct dvb_usb_device *d)
{
if (usb_set_interface(d->udev,0,7) < 0)
err("set interface failed");
cxusb_ctrl_msg(d,CMD_DIGITAL, NULL, 0, NULL, 0);
- if ((d->fe = lgdt330x_attach(&cxusb_lgdt330x_config, &d->i2c_adap)) != NULL)
+ if ((d->fe = lgdt330x_attach(&cxusb_lgdt3303_config, &d->i2c_adap)) != NULL)
return 0;
return -EIO;
.streaming_ctrl = cxusb_streaming_ctrl,
.power_ctrl = cxusb_power_ctrl,
- .frontend_attach = cxusb_lgdt330x_frontend_attach,
+ .frontend_attach = cxusb_lgdt3303_frontend_attach,
.tuner_attach = cxusb_lgh064f_tuner_attach,
.i2c_algo = &cxusb_i2c_algo,
d->state = DVB_USB_STATE_INIT;
-/* check the capabilites and set appropriate variables */
+/* check the capabilities and set appropriate variables */
/* speed - when running at FULL speed we need a HW PID filter */
if (d->udev->speed == USB_SPEED_FULL && !(d->props.caps & DVB_USB_HAS_PID_FILTER)) {
/**
* struct dvb_usb_properties - properties of a dvb-usb-device
- * @caps: capabilites of the DVB USB device.
+ * @caps: capabilities of the DVB USB device.
* @pid_filter_count: number of PID filter position in the optional hardware
* PID-filter.
*
A DVB-S tuner module. Say Y when you want to support this frontend.
config DVB_MT312
- tristate "Zarlink MT312 based"
+ tristate "Zarlink VP310/MT312 based"
depends on DVB_CORE
help
A DVB-S tuner module. Say Y when you want to support this frontend.
kfree(state);
}
-static struct dvb_frontend_ops vp310_mt312_ops;
-
-struct dvb_frontend* vp310_attach(const struct mt312_config* config,
- struct i2c_adapter* i2c)
-{
- struct mt312_state* state = NULL;
-
- /* allocate memory for the internal state */
- state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
- if (state == NULL)
- goto error;
-
- /* setup the state */
- state->config = config;
- state->i2c = i2c;
- memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
- strcpy(state->ops.info.name, "Zarlink VP310 DVB-S");
-
- /* check if the demod is there */
- if (mt312_readreg(state, ID, &state->id) < 0)
- goto error;
- if (state->id != ID_VP310) {
- goto error;
- }
-
- /* create dvb_frontend */
- state->frequency = 90;
- state->frontend.ops = &state->ops;
- state->frontend.demodulator_priv = state;
- return &state->frontend;
-
-error:
- kfree(state);
- return NULL;
-}
-
-struct dvb_frontend* mt312_attach(const struct mt312_config* config,
- struct i2c_adapter* i2c)
-{
- struct mt312_state* state = NULL;
-
- /* allocate memory for the internal state */
- state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
- if (state == NULL)
- goto error;
-
- /* setup the state */
- state->config = config;
- state->i2c = i2c;
- memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
- strcpy(state->ops.info.name, "Zarlink MT312 DVB-S");
-
- /* check if the demod is there */
- if (mt312_readreg(state, ID, &state->id) < 0)
- goto error;
- if (state->id != ID_MT312) {
- goto error;
- }
-
- /* create dvb_frontend */
- state->frequency = 60;
- state->frontend.ops = &state->ops;
- state->frontend.demodulator_priv = state;
- return &state->frontend;
-
-error:
- kfree(state);
- return NULL;
-}
-
static struct dvb_frontend_ops vp310_mt312_ops = {
.info = {
.set_voltage = mt312_set_voltage,
};
+struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
+ struct i2c_adapter* i2c)
+{
+ struct mt312_state* state = NULL;
+
+ /* allocate memory for the internal state */
+ state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
+ if (state == NULL)
+ goto error;
+
+ /* setup the state */
+ state->config = config;
+ state->i2c = i2c;
+ memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
+
+ /* check if the demod is there */
+ if (mt312_readreg(state, ID, &state->id) < 0)
+ goto error;
+
+ switch (state->id) {
+ case ID_VP310:
+ strcpy(state->ops.info.name, "Zarlink VP310 DVB-S");
+ state->frequency = 90;
+ break;
+ case ID_MT312:
+ strcpy(state->ops.info.name, "Zarlink MT312 DVB-S");
+ state->frequency = 60;
+ break;
+ default:
+ printk (KERN_WARNING "Only Zarlink VP310/MT312 are supported chips.\n");
+ goto error;
+ }
+
+ /* create dvb_frontend */
+ state->frontend.ops = &state->ops;
+ state->frontend.demodulator_priv = state;
+ return &state->frontend;
+
+error:
+ kfree(state);
+ return NULL;
+}
+
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
MODULE_LICENSE("GPL");
-EXPORT_SYMBOL(mt312_attach);
-EXPORT_SYMBOL(vp310_attach);
+EXPORT_SYMBOL(vp310_mt312_attach);
int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
};
-extern struct dvb_frontend* mt312_attach(const struct mt312_config* config,
- struct i2c_adapter* i2c);
+struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
+ struct i2c_adapter* i2c);
-extern struct dvb_frontend* vp310_attach(const struct mt312_config* config,
- struct i2c_adapter* i2c);
#endif // MT312_H
break;
case QAM_128:
- delay = 150;
- sweeprate = 1000;
- break;
-
case QAM_256:
delay = 200;
sweeprate = 500;
len = ntohl(*(u32*) ptr);
ptr += 4;
if (len >= 512) {
- printk("dvb-ttpci: dpram file is way to big.\n");
+ printk("dvb-ttpci: dpram file is way too big.\n");
return -EINVAL;
}
if (crc != crc32_le(0, ptr, len)) {
* The same behaviour of missing VSYNC can be duplicated on budget
* cards, by seting DD1_INIT trigger mode 7 in 3rd nibble.
*/
-static int av7110_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *pci_ext)
+static int __devinit av7110_attach(struct saa7146_dev* dev,
+ struct saa7146_pci_extension_data *pci_ext)
{
const int length = TS_WIDTH * TS_HEIGHT;
struct pci_dev *pdev = dev->pci;
goto out;
}
-static int av7110_detach(struct saa7146_dev* saa)
+static int __devexit av7110_detach(struct saa7146_dev* saa)
{
struct av7110 *av7110 = saa->ext_priv;
dprintk(4, "%p\n", av7110);
.module = THIS_MODULE,
.pci_tbl = &pci_tbl[0],
.attach = av7110_attach,
- .detach = av7110_detach,
+ .detach = __devexit_p(av7110_detach),
.irq_mask = MASK_19 | MASK_03 | MASK_10,
.irq_func = av7110_irq,
/* test DEBI */
iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4);
+ /* FIXME: Why does Nexus CA require 2x iwdebi for first init? */
+ iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4);
+
if ((ret=irdebi(av7110, DEBINOSWAP, DPRAM_BASE, 0, 4)) != 0x10325476) {
printk(KERN_ERR "dvb-ttpci: debi test in av7110_bootarm() failed: "
"%08x != %08x (check your BIOS 'Plug&Play OS' settings)\n",
}
-int __init av7110_ir_init(struct av7110 *av7110)
+int __devinit av7110_ir_init(struct av7110 *av7110)
{
static struct proc_dir_entry *e;
}
-void __exit av7110_ir_exit(struct av7110 *av7110)
+void __devexit av7110_ir_exit(struct av7110 *av7110)
{
int i;
//DBG("cpia_ioctl: %u\n", ioctlnr);
switch (ioctlnr) {
- /* query capabilites */
+ /* query capabilities */
case VIDIOCGCAP:
{
struct video_capability *b = arg;
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Contrast",
.minimum = 0,
- .maximum = 255,
+ .maximum = 127,
.step = 1,
.default_value = 64,
.flags = 0,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Saturation",
.minimum = 0,
- .maximum = 255,
+ .maximum = 127,
.step = 1,
.default_value = 64,
.flags = 0,
To compile this driver as a module, choose M here: the
module will be called cx8800
-config VIDEO_CX88_DVB
- tristate "DVB/ATSC Support for cx2388x based TV cards"
- depends on VIDEO_CX88 && DVB_CORE
- select VIDEO_BUF_DVB
- ---help---
- This adds support for DVB/ATSC cards based on the
- Connexant 2388x chip.
-
- To compile this driver as a module, choose M here: the
- module will be called cx88-dvb.
-
- You must also select one or more DVB/ATSC demodulators.
- If you are unsure which you need, choose all of them.
-
config VIDEO_CX88_ALSA
tristate "ALSA DMA audio support"
depends on VIDEO_CX88 && SND && EXPERIMENTAL
To compile this driver as a module, choose M here: the
module will be called cx88-alsa.
+config VIDEO_CX88_DVB
+ tristate "DVB/ATSC Support for cx2388x based TV cards"
+ depends on VIDEO_CX88 && DVB_CORE
+ select VIDEO_BUF_DVB
+ ---help---
+ This adds support for DVB/ATSC cards based on the
+ Connexant 2388x chip.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cx88-dvb.
+
+ You must also select one or more DVB/ATSC demodulators.
+ If you are unsure which you need, choose all of them.
+
config VIDEO_CX88_DVB_ALL_FRONTENDS
bool "Build all supported frontends for cx2388x based TV cards"
default y
em28xx_capture_start(dev, 1);
em28xx_resolution_set(dev);
+ /* device needs to be initialized before isoc transfer */
+ video_mux(dev, 0);
+
/* start the transfer */
errCode = em28xx_init_isoc(dev);
if (errCode)
/*
mxb - v4l2 driver for the Multimedia eXtension Board
- Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
+ Copyright (C) 1998-2006 Michael Hunold <michael@mihu.de>
Visit http://www.mihu.de/linux/saa7146/mxb/
for further details about this card.
struct video_decoder_init init;
struct i2c_msg msg;
struct tuner_setup tun_setup;
+ v4l2_std_id std = V4L2_STD_PAL_BG;
int i = 0, err = 0;
struct tea6415c_multiplex vm;
mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_FREQUENCY,
&mxb->cur_freq);
+ /* set a default video standard */
+ mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);
+
/* mute audio on tea6420s */
mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[6][0]);
mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[6][1]);
int one = 1;
if(V4L2_STD_PAL_I == std->id ) {
+ v4l2_std_id std = V4L2_STD_PAL_I;
DEB_D(("VIDIOC_S_STD: setting mxb for PAL_I.\n"));
/* set the 7146 gpio register -- I don't know what this does exactly */
saa7146_write(dev, GPIO_CTRL, 0x00404050);
/* unset the 7111 gpio register -- I don't know what this does exactly */
mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &zero);
+ mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);
} else {
+ v4l2_std_id std = V4L2_STD_PAL_BG;
DEB_D(("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM.\n"));
/* set the 7146 gpio register -- I don't know what this does exactly */
saa7146_write(dev, GPIO_CTRL, 0x00404050);
/* set the 7111 gpio register -- I don't know what this does exactly */
mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &one);
+ mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);
}
return 0;
}
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Contrast",
.minimum = 0,
- .maximum = 255,
+ .maximum = 127,
.step = 1,
.default_value = 64,
.flags = 0,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Saturation",
.minimum = 0,
- .maximum = 255,
+ .maximum = 127,
.step = 1,
.default_value = 64,
.flags = 0,
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
-static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 0};
+static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1};
module_param_array(index, int, NULL, 0444);
+module_param_array(enable, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for SAA7134 capture interface(s).");
+MODULE_PARM_DESC(enable, "Enable (or not) the SAA7134 capture interface(s).");
#define dprintk(fmt, arg...) if (debug) \
printk(KERN_DEBUG "%s/alsa: " fmt, dev->name , ##arg)
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
- .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
+ .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
.inputs = {{
.name = name_tv,
.vmux = 3,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
- .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
+ .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
.radio_type = UNSET,
.tuner_addr = 0x61,
.radio_addr = ADDR_UNSET,
- .tda9887_conf = TDA9887_PRESENT,
+ .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
.radio_type = UNSET,
.tuner_addr = 0x61,
.radio_addr = ADDR_UNSET,
- .tda9887_conf = TDA9887_PRESENT,
+ .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
}},
},
[SAA7134_BOARD_PINNACLE_PCTV_110i] = {
- .name = "Pinnacle PCTV 110i (saa7133)",
+ .name = "Pinnacle PCTV 40i/50i/110i (saa7133)",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
},{
.name = name_comp1,
.vmux = 1,
+ .amux = LINE2,
+ },{
+ .name = name_comp2,
+ .vmux = 0,
.amux = LINE2,
},{
.name = name_svideo,
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7130,
.subvendor = 0x1048,
- .subdevice = 0x226b,
+ .subdevice = 0x226a,
.driver_data = SAA7134_BOARD_ELSA_500TV,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000000);
+ case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
+ /* this turns the remote control chip off to work around a bug in it */
+ saa_writeb(SAA7134_GPIO_GPMODE1, 0x80);
+ saa_writeb(SAA7134_GPIO_GPSTATUS1, 0x80);
+ break;
case SAA7134_BOARD_MONSTERTV_MOBILE:
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000);
mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg));
mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg));
mt352_write(fe, irq_cfg, sizeof(irq_cfg));
+
return 0;
}
struct dvb_frontend_parameters* params,
u8* pllbuf)
{
- static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
- static int off = TDA9887_PRESENT | TDA9887_PORT2_ACTIVE;
+ u8 off[] = { 0x00, 0xf1};
+ u8 on[] = { 0x00, 0x71};
+ struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)};
+
struct saa7134_dev *dev = fe->dvb->priv;
struct v4l2_frequency f;
f.tuner = 0;
f.type = V4L2_TUNER_DIGITAL_TV;
f.frequency = params->frequency / 1000 * 16 / 1000;
- saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
- saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&off);
+ msg.buf = on;
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
pinnacle_antenna_pwr(dev, antenna_pwr);
int tda8290_probe(struct i2c_client *c)
{
- unsigned char soft_reset[] = { 0x00, 0x00 };
- unsigned char easy_mode_b[] = { 0x01, 0x02 };
- unsigned char easy_mode_g[] = { 0x01, 0x04 };
+ unsigned char soft_reset[] = { 0x00, 0x00 };
+ unsigned char easy_mode_b[] = { 0x01, 0x02 };
+ unsigned char easy_mode_g[] = { 0x01, 0x04 };
+ unsigned char restore_9886[] = { 0x00, 0xd6, 0x30 };
unsigned char addr_dto_lsb = 0x07;
unsigned char data;
return 0;
}
}
+ i2c_master_send(c, restore_9886, 3);
return -1;
}
struct v4l2_frequency *f = arg;
switch_v4l2();
- if (V4L2_TUNER_RADIO == f->type &&
- V4L2_TUNER_RADIO != t->mode) {
+ if ((V4L2_TUNER_RADIO == f->type && V4L2_TUNER_RADIO != t->mode)
+ || (V4L2_TUNER_DIGITAL_TV == f->type
+ && V4L2_TUNER_DIGITAL_TV != t->mode)) {
if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY")
== EINVAL)
return 0;
the slave is bound to it). Otherwise it doesn't need this functions and
therfor they may not be initialized.
- The other fuctions are just for convenience, as they are for shure used by
+ The other fuctions are just for convenience, as they are for sure used by
most/all of the codecs. The last ones may be ommited, too.
See the structure declaration below for more information and which data has
while (!(zr36050_read_status1(ptr) & 0x4)) {
udelay(1);
- if (i++ > 200000) { // 200ms, there is for shure something wrong!!!
+ if (i++ > 200000) { // 200ms, there is for sure something wrong!!!
dprintk(1,
"%s: timout at wait_end (last status: 0x%02x)\n",
ptr->name, ptr->status1);
while (zr36060_read_status(ptr) & ZR060_CFSR_Busy) {
udelay(1);
- if (i++ > 200000) { // 200ms, there is for shure something wrong!!!
+ if (i++ > 200000) { // 200ms, there is for sure something wrong!!!
dprintk(1,
"%s: timout at wait_end (last status: 0x%02x)\n",
ptr->name, ptr->status);
case I2C_DRIVERID_VIDEODECODER:
DEBUG(printk(CARD_INFO "decoder attached\n",CARD));
- /* fetch the capabilites of the decoder */
+ /* fetch the capabilities of the decoder */
rv = i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_GET_CAPABILITIES, &dc);
if (rv) {
DEBUG(printk(CARD_DEBUG "decoder is not V4L aware!\n",CARD));
static inline void command_put(struct command *cmd)
{
unsigned long flags;
+ spinlock_t *lock = cmd->lock;
- spin_lock_irqsave(cmd->lock, flags);
- kobject_put(&cmd->kobj);
- spin_unlock_irqrestore(cmd->lock, flags);
+ spin_lock_irqsave(lock, flags);
+ kobject_put(&cmd->kobj);
+ spin_unlock_irqrestore(lock, flags);
}
static inline void command_get(struct command *cmd)
{
- kobject_get(&cmd->kobj);
+ kobject_get(&cmd->kobj);
}
#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT);
- switch (mmc_rsp_type(cmd->flags)) {
+ switch (mmc_resp_type(cmd)) {
case MMC_RSP_R1:
mmccmd |= SD_CMD_RT_1;
break;
static void au1xmmc_dma_callback(int irq, void *dev_id, struct pt_regs *regs)
{
struct au1xmmc_host *host = (struct au1xmmc_host *) dev_id;
- u32 status;
/* Avoid spurious interrupts */
.set_ios = au1xmmc_set_ios,
};
-static int au1xmmc_probe(struct device *dev)
+static int __devinit au1xmmc_probe(struct platform_device *pdev)
{
int i, ret = 0;
disable_irq(AU1100_SD_IRQ);
for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) {
- struct mmc_host *mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), dev);
+ struct mmc_host *mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev);
struct au1xmmc_host *host = 0;
if (!mmc) {
return 0;
}
-static int au1xmmc_remove(struct device *dev)
+static int __devexit au1xmmc_remove(struct platform_device *pdev)
{
int i;
return 0;
}
-static struct device_driver au1xmmc_driver = {
- .name = DRIVER_NAME,
- .bus = &platform_bus_type,
+static struct platform_driver au1xmmc_driver = {
.probe = au1xmmc_probe,
.remove = au1xmmc_remove,
.suspend = NULL,
- .resume = NULL
+ .resume = NULL,
+ .driver = {
+ .name = DRIVER_NAME,
+ },
};
static int __init au1xmmc_init(void)
{
- return driver_register(&au1xmmc_driver);
+ return platform_driver_register(&au1xmmc_driver);
}
static void __exit au1xmmc_exit(void)
{
- driver_unregister(&au1xmmc_driver);
+ platform_driver_unregister(&au1xmmc_driver);
}
module_init(au1xmmc_init);
* we're at a block boundary and need to erase the whole block.
*/
pageaddr = instr->addr / priv->page_size;
- do_block = (pageaddr & 0x7) == 0 && instr->len <= blocksize;
+ do_block = (pageaddr & 0x7) == 0 && instr->len >= blocksize;
pageaddr = pageaddr << priv->page_offset;
command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE;
/*
- * $Id: redboot.c,v 1.18 2005/11/07 11:14:21 gleixner Exp $
+ * $Id: redboot.c,v 1.19 2005/12/01 10:03:51 dwmw2 Exp $
*
* Parse RedBoot-style Flash Image System (FIS) tables and
* produce a Linux partition array to match.
i = numslots;
break;
}
- if (!memcmp(buf[i].name, "FIS directory", 14))
+ if (!memcmp(buf[i].name, "FIS directory", 14)) {
+ /* This is apparently the FIS directory entry for the
+ * FIS directory itself. The FIS directory size is
+ * one erase block; if the buf[i].size field is
+ * swab32(erasesize) then we know we are looking at
+ * a byte swapped FIS directory - swap all the entries!
+ * (NOTE: this is 'size' not 'data_length'; size is
+ * the full size of the entry.)
+ */
+ if (swab32(buf[i].size) == master->erasesize) {
+ int j;
+ for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) {
+ /* The unsigned long fields were written with the
+ * wrong byte sex, name and pad have no byte sex.
+ */
+ swab32s(&buf[j].flash_base);
+ swab32s(&buf[j].mem_base);
+ swab32s(&buf[j].size);
+ swab32s(&buf[j].entry_point);
+ swab32s(&buf[j].data_length);
+ swab32s(&buf[j].desc_cksum);
+ swab32s(&buf[j].file_cksum);
+ }
+ }
break;
+ }
}
if (i == numslots) {
/* Didn't find it */
static int __init el3_init_module(void)
{
+ int ret = 0;
el3_cards = 0;
if (debug >= 0)
}
#ifdef CONFIG_EISA
- if (eisa_driver_register (&el3_eisa_driver) < 0) {
- eisa_driver_unregister (&el3_eisa_driver);
- }
+ ret = eisa_driver_register(&el3_eisa_driver);
#endif
#ifdef CONFIG_MCA
- mca_register_driver(&el3_mca_driver);
+ {
+ int err = mca_register_driver(&el3_mca_driver);
+ if (ret == 0)
+ ret = err;
+ }
#endif
- return 0;
+ return ret;
}
static void __exit el3_cleanup_module(void)
return -ENOMEM;
}
+static void cp_init_rings_index (struct cp_private *cp)
+{
+ cp->rx_tail = 0;
+ cp->tx_head = cp->tx_tail = 0;
+}
+
static int cp_init_rings (struct cp_private *cp)
{
memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE);
cp->tx_ring[CP_TX_RING_SIZE - 1].opts1 = cpu_to_le32(RingEnd);
- cp->rx_tail = 0;
- cp->tx_head = cp->tx_tail = 0;
+ cp_init_rings_index(cp);
return cp_refill_rx (cp);
}
spin_unlock_irqrestore (&cp->lock, flags);
- if (cp->pdev && cp->wol_enabled) {
- pci_save_state (cp->pdev);
- cp_set_d3_state (cp);
- }
+ pci_save_state(pdev);
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), cp->wol_enabled);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
}
static int cp_resume (struct pci_dev *pdev)
{
- struct net_device *dev;
- struct cp_private *cp;
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct cp_private *cp = netdev_priv(dev);
unsigned long flags;
- dev = pci_get_drvdata (pdev);
- cp = netdev_priv(dev);
+ if (!netif_running(dev))
+ return 0;
netif_device_attach (dev);
-
- if (cp->pdev && cp->wol_enabled) {
- pci_set_power_state (cp->pdev, PCI_D0);
- pci_restore_state (cp->pdev);
- }
-
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_enable_wake(pdev, PCI_D0, 0);
+
+ /* FIXME: sh*t may happen if the Rx ring buffer is depleted */
+ cp_init_rings_index (cp);
cp_init_hw (cp);
netif_start_queue (dev);
without a specific driver are compatible with NE2000.
If you have a PCI NE2000 card however, say N here and Y to "PCI
- NE2000 support", above. If you have a NE2000 card and are running on
+ NE2000 and clone support" under "EISA, VLB, PCI and on board
+ controllers" below. If you have a NE2000 card and are running on
an MCA system (a bus system used on some IBM PS/2 computers and
laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
below.
struct peespi *t1_espi_create(adapter_t *adapter)
{
- struct peespi *espi = kmalloc(sizeof(*espi), GFP_KERNEL);
-
- memset(espi, 0, sizeof(*espi));
+ struct peespi *espi = kzalloc(sizeof(*espi), GFP_KERNEL);
if (espi)
espi->adapter = adapter;
if (test_and_clear_bit(nd->if_port,
&sge->stopped_tx_queues) &&
netif_running(nd)) {
- sge->stats.cmdQ_restarted[3]++;
+ sge->stats.cmdQ_restarted[2]++;
netif_wake_queue(nd);
}
}
if (unlikely(credits < count)) {
netif_stop_queue(dev);
set_bit(dev->if_port, &sge->stopped_tx_queues);
- sge->stats.cmdQ_full[3]++;
+ sge->stats.cmdQ_full[2]++;
spin_unlock(&q->lock);
if (!netif_queue_stopped(dev))
CH_ERR("%s: Tx ring full while queue awake!\n",
return NETDEV_TX_BUSY;
}
if (unlikely(credits - count < q->stop_thres)) {
- sge->stats.cmdQ_full[3]++;
+ sge->stats.cmdQ_full[2]++;
netif_stop_queue(dev);
set_bit(dev->if_port, &sge->stopped_tx_queues);
}
#ifdef MODULE
static struct net_device *de620_dev;
-int init_module(void)
+int __init init_module(void)
{
de620_dev = de620_probe(-1);
if (IS_ERR(de620_dev))
*/
#define DRV_NAME "D-Link DL2000-based linux driver"
-#define DRV_VERSION "v1.17a"
-#define DRV_RELDATE "2002/10/04"
+#define DRV_VERSION "v1.17b"
+#define DRV_RELDATE "2006/03/10"
#include "dl2k.h"
static char version[] __devinitdata =
break;
skb = np->tx_skbuff[entry];
pci_unmap_single (np->pdev,
- np->tx_ring[entry].fraginfo,
+ np->tx_ring[entry].fraginfo & 0xffffffffffff,
skb->len, PCI_DMA_TODEVICE);
if (irq)
dev_kfree_skb_irq (skb);
/* Small skbuffs for short packets */
if (pkt_len > copy_thresh) {
- pci_unmap_single (np->pdev, desc->fraginfo,
+ pci_unmap_single (np->pdev,
+ desc->fraginfo & 0xffffffffffff,
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
skb_put (skb = np->rx_skbuff[entry], pkt_len);
np->rx_skbuff[entry] = NULL;
} else if ((skb = dev_alloc_skb (pkt_len + 2)) != NULL) {
pci_dma_sync_single_for_cpu(np->pdev,
- desc->fraginfo,
+ desc->fraginfo &
+ 0xffffffffffff,
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
skb->dev = dev;
pkt_len, 0);
skb_put (skb, pkt_len);
pci_dma_sync_single_for_device(np->pdev,
- desc->fraginfo,
+ desc->fraginfo &
+ 0xffffffffffff,
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
}
np->rx_ring[i].fraginfo = 0;
skb = np->rx_skbuff[i];
if (skb) {
- pci_unmap_single (np->pdev, np->rx_ring[i].fraginfo,
- skb->len, PCI_DMA_FROMDEVICE);
+ pci_unmap_single(np->pdev,
+ np->rx_ring[i].fraginfo & 0xffffffffffff,
+ skb->len, PCI_DMA_FROMDEVICE);
dev_kfree_skb (skb);
np->rx_skbuff[i] = NULL;
}
for (i = 0; i < TX_RING_SIZE; i++) {
skb = np->tx_skbuff[i];
if (skb) {
- pci_unmap_single (np->pdev, np->tx_ring[i].fraginfo,
- skb->len, PCI_DMA_TODEVICE);
+ pci_unmap_single(np->pdev,
+ np->tx_ring[i].fraginfo & 0xffffffffffff,
+ skb->len, PCI_DMA_TODEVICE);
dev_kfree_skb (skb);
np->tx_skbuff[i] = NULL;
}
msleep(10);
+ pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr,
+ RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+
if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd),
skb->data, ETH_DATA_LEN))
err = -EAGAIN;
err_loopback_none:
mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, 0);
nic->loopback = lb_none;
- e100_hw_init(nic);
e100_clean_cbs(nic);
+ e100_hw_reset(nic);
err_clean_rx:
e100_rx_clean_list(nic);
return err;
struct e1000_ps_page *ps_page;
struct e1000_ps_page_dma *ps_page_dma;
- struct sk_buff *rx_skb_top;
- struct sk_buff *rx_skb_prev;
-
/* cpu for rx queue */
int cpu;
#else
#define DRIVERNAPI "-NAPI"
#endif
-#define DRV_VERSION "6.3.9-k2"DRIVERNAPI
+#define DRV_VERSION "6.3.9-k4"DRIVERNAPI
char e1000_driver_version[] = DRV_VERSION;
static char e1000_copyright[] = "Copyright (c) 1999-2005 Intel Corporation.";
rxdr->next_to_clean = 0;
rxdr->next_to_use = 0;
- rxdr->rx_skb_top = NULL;
- rxdr->rx_skb_prev = NULL;
return 0;
}
rctl |= adapter->rx_buffer_len << 0x11;
} else {
rctl &= ~E1000_RCTL_SZ_4096;
- rctl &= ~E1000_RCTL_BSEX;
- rctl |= E1000_RCTL_SZ_2048;
+ rctl |= E1000_RCTL_BSEX;
+ switch (adapter->rx_buffer_len) {
+ case E1000_RXBUFFER_2048:
+ default:
+ rctl |= E1000_RCTL_SZ_2048;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_4096:
+ rctl |= E1000_RCTL_SZ_4096;
+ break;
+ case E1000_RXBUFFER_8192:
+ rctl |= E1000_RCTL_SZ_8192;
+ break;
+ case E1000_RXBUFFER_16384:
+ rctl |= E1000_RCTL_SZ_16384;
+ break;
+ }
}
#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
}
}
- /* there also may be some cached data in our adapter */
- if (rx_ring->rx_skb_top) {
- dev_kfree_skb(rx_ring->rx_skb_top);
-
- /* rx_skb_prev will be wiped out by rx_skb_top */
- rx_ring->rx_skb_top = NULL;
- rx_ring->rx_skb_prev = NULL;
- }
-
-
size = sizeof(struct e1000_buffer) * rx_ring->count;
memset(rx_ring->buffer_info, 0, size);
size = sizeof(struct e1000_ps_page) * rx_ring->count;
if (!__pskb_pull_tail(skb, pull_size)) {
printk(KERN_ERR "__pskb_pull_tail failed.\n");
dev_kfree_skb_any(skb);
- return -EFAULT;
+ return NETDEV_TX_OK;
}
len = skb->len - skb->data_len;
}
break;
}
- /* since the driver code now supports splitting a packet across
- * multiple descriptors, most of the fifo related limitations on
- * jumbo frame traffic have gone away.
- * simply use 2k descriptors for everything.
- *
- * NOTE: dev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
- * means we reserve 2 more, this pushes us to allocate from the next
- * larger slab size
- * i.e. RXBUFFER_2048 --> size-4096 slab */
-
- /* recent hardware supports 1KB granularity */
+
if (adapter->hw.mac_type > e1000_82547_rev_2) {
- adapter->rx_buffer_len =
- ((max_frame < E1000_RXBUFFER_2048) ?
- max_frame : E1000_RXBUFFER_2048);
+ adapter->rx_buffer_len = max_frame;
E1000_ROUNDUP(adapter->rx_buffer_len, 1024);
- } else
- adapter->rx_buffer_len = E1000_RXBUFFER_2048;
+ } else {
+ if(unlikely((adapter->hw.mac_type < e1000_82543) &&
+ (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE))) {
+ DPRINTK(PROBE, ERR, "Jumbo Frames not supported "
+ "on 82542\n");
+ return -EINVAL;
+ } else {
+ if(max_frame <= E1000_RXBUFFER_2048)
+ adapter->rx_buffer_len = E1000_RXBUFFER_2048;
+ else if(max_frame <= E1000_RXBUFFER_4096)
+ adapter->rx_buffer_len = E1000_RXBUFFER_4096;
+ else if(max_frame <= E1000_RXBUFFER_8192)
+ adapter->rx_buffer_len = E1000_RXBUFFER_8192;
+ else if(max_frame <= E1000_RXBUFFER_16384)
+ adapter->rx_buffer_len = E1000_RXBUFFER_16384;
+ }
+ }
netdev->mtu = new_mtu;
uint8_t last_byte;
unsigned int i;
int cleaned_count = 0;
- boolean_t cleaned = FALSE, multi_descriptor = FALSE;
+ boolean_t cleaned = FALSE;
i = rx_ring->next_to_clean;
rx_desc = E1000_RX_DESC(*rx_ring, i);
length = le16_to_cpu(rx_desc->length);
- skb_put(skb, length);
-
- if (!(status & E1000_RXD_STAT_EOP)) {
- if (!rx_ring->rx_skb_top) {
- rx_ring->rx_skb_top = skb;
- rx_ring->rx_skb_top->len = length;
- rx_ring->rx_skb_prev = skb;
- } else {
- if (skb_shinfo(rx_ring->rx_skb_top)->frag_list) {
- rx_ring->rx_skb_prev->next = skb;
- skb->prev = rx_ring->rx_skb_prev;
- } else {
- skb_shinfo(rx_ring->rx_skb_top)->frag_list = skb;
- }
- rx_ring->rx_skb_prev = skb;
- rx_ring->rx_skb_top->data_len += length;
- }
+ if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
+ /* All receives must fit into a single buffer */
+ E1000_DBG("%s: Receive packet consumed multiple"
+ " buffers\n", netdev->name);
+ dev_kfree_skb_irq(skb);
goto next_desc;
- } else {
- if (rx_ring->rx_skb_top) {
- if (skb_shinfo(rx_ring->rx_skb_top)
- ->frag_list) {
- rx_ring->rx_skb_prev->next = skb;
- skb->prev = rx_ring->rx_skb_prev;
- } else
- skb_shinfo(rx_ring->rx_skb_top)
- ->frag_list = skb;
-
- rx_ring->rx_skb_top->data_len += length;
- rx_ring->rx_skb_top->len +=
- rx_ring->rx_skb_top->data_len;
-
- skb = rx_ring->rx_skb_top;
- multi_descriptor = TRUE;
- rx_ring->rx_skb_top = NULL;
- rx_ring->rx_skb_prev = NULL;
- }
}
if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
* performance for small packets with large amounts
* of reassembly being done in the stack */
#define E1000_CB_LENGTH 256
- if ((length < E1000_CB_LENGTH) &&
- !rx_ring->rx_skb_top &&
- /* or maybe (status & E1000_RXD_STAT_EOP) && */
- !multi_descriptor) {
+ if (length < E1000_CB_LENGTH) {
struct sk_buff *new_skb =
dev_alloc_skb(length + NET_IP_ALIGN);
if (new_skb) {
skb = new_skb;
skb_put(skb, length);
}
- }
+ } else
+ skb_put(skb, length);
/* end copybreak code */
e1000_rx_checksum(adapter,
(uint32_t)(status) |
((uint32_t)(rx_desc->errors) << 24),
- rx_desc->csum, skb);
+ le16_to_cpu(rx_desc->csum), skb);
skb->protocol = eth_type_trans(skb, netdev);
#ifdef CONFIG_E1000_NAPI
}
e1000_rx_checksum(adapter, staterr,
- rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+ le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
skb->protocol = eth_type_trans(skb, netdev);
if (likely(rx_desc->wb.upper.header_status &
- E1000_RXDPS_HDRSTAT_HDRSP))
+ cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)))
adapter->rx_hdr_split++;
#ifdef CONFIG_E1000_NAPI
if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
#endif
next_desc:
- rx_desc->wb.middle.status_error &= ~0xFF;
+ rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
buffer_info->skb = NULL;
/* return some buffers to hardware, one at a time is too slow */
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0309),
PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1106),
PCMCIA_DEVICE_MANF_CARD(0x8a01, 0xc1ab),
+ PCMCIA_DEVICE_PROD_ID12("AmbiCom,Inc.", "Fast Ethernet PC Card(AMB8110)", 0x49b020a7, 0x119cc9fc),
PCMCIA_DEVICE_PROD_ID124("Fast Ethernet", "16-bit PC Card", "AX88190", 0xb4be14e3, 0x9a12eb6a, 0xab9be5ef),
PCMCIA_DEVICE_PROD_ID12("ASIX", "AX88190", 0x0959823b, 0xab9be5ef),
PCMCIA_DEVICE_PROD_ID12("Billionton", "LNA-100B", 0x552ab682, 0xbc3b87e1),
i++, mclist = mclist->next) {
memcpy(sp->usr_addrs[i].addr, mclist->dmi_addr,
ETH_ALEN);
+ mac_addr = 0;
for (j = 0; j < ETH_ALEN; j++) {
mac_addr |= mclist->dmi_addr[j];
mac_addr <<= 8;
printk("%2.2x.\n", net_dev->dev_addr[i]);
/* Detect Wake on Lan support */
- ret = inl(CFGPMC & PMESP);
+ ret = (inl(net_dev->base_addr + CFGPMC) & PMESP) >> 27;
if (netif_msg_probe(sis_priv) && (ret & PME_D3C) == 0)
printk(KERN_INFO "%s: Wake on LAN only available from suspend to RAM.", net_dev->name);
if (wol->wolopts == 0) {
pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr);
- cfgpmcsr |= ~PME_EN;
+ cfgpmcsr &= ~PME_EN;
pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr);
outl(pmctrl_bits, pmctrl_addr);
if (netif_msg_wol(sis_priv))
#define TX_RING_SIZE 512
#define TX_DEF_PENDING (TX_RING_SIZE - 1)
#define TX_MIN_PENDING 64
-#define MAX_SKB_TX_LE (4 + 2*MAX_SKB_FRAGS)
+#define MAX_SKB_TX_LE (4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS)
#define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */
#define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le))
module_param(copybreak, int, 0);
MODULE_PARM_DESC(copybreak, "Receive copy threshold");
-static int disable_msi = 0;
-module_param(disable_msi, int, 0);
-MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
-
static const struct pci_device_id sky2_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
/* Configure Rx MAC FIFO */
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
- sky2_write16(hw, SK_REG(port, RX_GMF_CTRL_T),
- GMF_RX_CTRL_DEF);
+ sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
+ GMF_OPER_ON | GMF_RX_F_FL_ON);
/* Flush Rx MAC FIFO on any flow control or error */
sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
sky2_rx_add(sky2, re->mapaddr);
}
+ /* Truncate oversize frames */
+ sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), sky2->rx_bufsize - 8);
+ sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+
/* Tell chip about available buffers */
sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put);
sky2->rx_last_put = sky2_read16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX));
struct sky2_tx_le *le = NULL;
struct tx_ring_info *re;
unsigned i, len;
+ int avail;
dma_addr_t mapping;
u32 addr64;
u16 mss;
re->idx = sky2->tx_prod;
le->ctrl |= EOP;
+ avail = tx_avail(sky2);
+ if (mss != 0 || avail < TX_MIN_PENDING) {
+ le->ctrl |= FRC_STAT;
+ if (avail <= MAX_SKB_TX_LE)
+ netif_stop_queue(dev);
+ }
+
sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod,
&sky2->tx_last_put, TX_RING_SIZE);
- if (tx_avail(sky2) <= MAX_SKB_TX_LE)
- netif_stop_queue(dev);
-
out_unlock:
spin_unlock(&sky2->tx_lock);
#define roundup(x, y) ((((x)+((y)-1))/(y))*(y))
-/* Want receive buffer size to be multiple of 64 bits, and incl room for vlan */
+/* Want receive buffer size to be multiple of 64 bits
+ * and incl room for vlan and truncation
+ */
static inline unsigned sky2_buf_size(int mtu)
{
- return roundup(mtu + ETH_HLEN + 4, 8);
+ return roundup(mtu + ETH_HLEN + VLAN_HLEN, 8) + 8;
}
static int sky2_change_mtu(struct net_device *dev, int new_mtu)
if (!(status & GMR_FS_RX_OK))
goto resubmit;
- if ((status >> 16) != length || length > sky2->rx_bufsize)
+ if (length > sky2->netdev->mtu + ETH_HLEN)
goto oversize;
if (length < copybreak) {
dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
}
-/* Handle software interrupt used during MSI test */
-static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id,
- struct pt_regs *regs)
-{
- struct sky2_hw *hw = dev_id;
- u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
-
- if (status == 0)
- return IRQ_NONE;
-
- if (status & Y2_IS_IRQ_SW) {
- sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
- hw->msi = 1;
- }
- sky2_write32(hw, B0_Y2_SP_ICR, 2);
-
- sky2_read32(hw, B0_IMSK);
- return IRQ_HANDLED;
-}
-
-/* Test interrupt path by forcing a a software IRQ */
-static int __devinit sky2_test_msi(struct sky2_hw *hw)
-{
- struct pci_dev *pdev = hw->pdev;
- int i, err;
-
- sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
-
- err = request_irq(pdev->irq, sky2_test_intr, SA_SHIRQ, DRV_NAME, hw);
- if (err) {
- printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
- pci_name(pdev), pdev->irq);
- return err;
- }
-
- sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
- wmb();
-
- for (i = 0; i < 10; i++) {
- barrier();
- if (hw->msi)
- goto found;
- mdelay(1);
- }
-
- err = -EOPNOTSUPP;
- sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
- found:
- sky2_write32(hw, B0_IMSK, 0);
-
- free_irq(pdev->irq, hw);
-
- return err;
-}
-
static int __devinit sky2_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
}
}
- if (!disable_msi && pci_enable_msi(pdev) == 0) {
- err = sky2_test_msi(hw);
- if (err == -EOPNOTSUPP) {
- /* MSI test failed, go back to INTx mode */
- printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, "
- "switching to INTx mode. Please report this failure to "
- "the PCI maintainer and include system chipset information.\n",
- pci_name(pdev));
- pci_disable_msi(pdev);
- }
- else if (err)
- goto err_out_unregister;
- }
-
- err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ | SA_SAMPLE_RANDOM,
- DRV_NAME, hw);
+ err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ, DRV_NAME, hw);
if (err) {
printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
pci_name(pdev), pdev->irq);
return 0;
err_out_unregister:
- if (hw->msi)
- pci_disable_msi(pdev);
if (dev1) {
unregister_netdev(dev1);
free_netdev(dev1);
sky2_read8(hw, B0_CTST);
free_irq(pdev->irq, hw);
- if (hw->msi)
- pci_disable_msi(pdev);
pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
pci_release_regions(pdev);
pci_disable_device(pdev);
u32 intr_mask;
int pm_cap;
- int msi;
u8 chip_id;
u8 chip_rev;
u8 copper;
(base + len + 8 < base));
}
+/* Test for DMA addresses > 40-bit */
+static inline int tg3_40bit_overflow_test(struct tg3 *tp, dma_addr_t mapping,
+ int len)
+{
+#if defined(CONFIG_HIGHMEM) && (BITS_PER_LONG == 64)
+ if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)
+ return (((u64) mapping + len) > DMA_40BIT_MASK);
+ return 0;
+#else
+ return 0;
+#endif
+}
+
static void tg3_set_txd(struct tg3 *, int, dma_addr_t, int, u32, u32);
-static int tigon3_4gb_hwbug_workaround(struct tg3 *tp, struct sk_buff *skb,
+/* Workaround 4GB and 40-bit hardware DMA bugs. */
+static int tigon3_dma_hwbug_workaround(struct tg3 *tp, struct sk_buff *skb,
u32 last_plus_one, u32 *start,
u32 base_flags, u32 mss)
{
if (tg3_4g_overflow_test(mapping, len))
would_hit_hwbug = 1;
+ if (tg3_40bit_overflow_test(tp, mapping, len))
+ would_hit_hwbug = 1;
+
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
tg3_set_txd(tp, entry, mapping, len,
base_flags, (i == last)|(mss << 1));
/* If the workaround fails due to memory/mapping
* failure, silently drop this packet.
*/
- if (tigon3_4gb_hwbug_workaround(tp, skb, last_plus_one,
+ if (tigon3_dma_hwbug_workaround(tp, skb, last_plus_one,
&start, base_flags, mss))
goto out_unlock;
return 0;
if (venid == PCI_VENDOR_ID_SUN)
return 1;
+
+ /* TG3 chips onboard the SunBlade-2500 don't have the
+ * subsystem-vendor-id set to PCI_VENDOR_ID_SUN but they
+ * are distinguishable from non-Sun variants by being
+ * named "network" by the firmware. Non-Sun cards will
+ * show up as being named "ethernet".
+ */
+ if (!strcmp(pcp->prom_name, "network"))
+ return 1;
}
return 0;
}
}
}
- /* Find msi capability. */
+ /* The EPB bridge inside 5714, 5715, and 5780 cannot support
+ * DMA addresses > 40-bit. This bridge may have other additional
+ * 57xx devices behind it in some 4-port NIC designs for example.
+ * Any tg3 device found behind the bridge will also need the 40-bit
+ * DMA workaround.
+ */
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) {
tp->tg3_flags2 |= TG3_FLG2_5780_CLASS;
+ tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG;
tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI);
}
+ else {
+ struct pci_dev *bridge = NULL;
+
+ do {
+ bridge = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
+ PCI_DEVICE_ID_SERVERWORKS_EPB,
+ bridge);
+ if (bridge && bridge->subordinate &&
+ (bridge->subordinate->number <=
+ tp->pdev->bus->number) &&
+ (bridge->subordinate->subordinate >=
+ tp->pdev->bus->number)) {
+ tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG;
+ pci_dev_put(bridge);
+ break;
+ }
+ } while (bridge);
+ }
/* Initialize misc host control in PCI block. */
tp->misc_host_ctrl |= (misc_ctrl_reg &
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
u32 ccval = (tr32(TG3PCI_CLOCK_CTRL) & 0x1f);
- if (ccval == 0x6 || ccval == 0x7)
+ /* If the 5704 is behind the EPB bridge, we can
+ * do the less restrictive ONE_DMA workaround for
+ * better performance.
+ */
+ if ((tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
+ tp->dma_rwctrl |= 0x8000;
+ else if (ccval == 0x6 || ccval == 0x7)
tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA;
/* Set bit 23 to enable PCIX hw bug fix */
strcat(str, "66MHz");
else if (clock_ctrl == 6)
strcat(str, "100MHz");
- else if (clock_ctrl == 7)
- strcat(str, "133MHz");
} else {
strcpy(str, "PCI:");
if (tp->tg3_flags & TG3_FLAG_PCI_HIGH_SPEED)
unsigned long tg3reg_base, tg3reg_len;
struct net_device *dev;
struct tg3 *tp;
- int i, err, pci_using_dac, pm_cap;
+ int i, err, pm_cap;
char str[40];
+ u64 dma_mask, persist_dma_mask;
if (tg3_version_printed++ == 0)
printk(KERN_INFO "%s", version);
goto err_out_free_res;
}
- /* Configure DMA attributes. */
- err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
- if (!err) {
- pci_using_dac = 1;
- err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
- if (err < 0) {
- printk(KERN_ERR PFX "Unable to obtain 64 bit DMA "
- "for consistent allocations\n");
- goto err_out_free_res;
- }
- } else {
- err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
- if (err) {
- printk(KERN_ERR PFX "No usable DMA configuration, "
- "aborting.\n");
- goto err_out_free_res;
- }
- pci_using_dac = 0;
- }
-
tg3reg_base = pci_resource_start(pdev, 0);
tg3reg_len = pci_resource_len(pdev, 0);
SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pdev->dev);
- if (pci_using_dac)
- dev->features |= NETIF_F_HIGHDMA;
dev->features |= NETIF_F_LLTX;
#if TG3_VLAN_TAG_USED
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
goto err_out_iounmap;
}
+ /* The EPB bridge inside 5714, 5715, and 5780 and any
+ * device behind the EPB cannot support DMA addresses > 40-bit.
+ * On 64-bit systems with IOMMU, use 40-bit dma_mask.
+ * On 64-bit systems without IOMMU, use 64-bit dma_mask and
+ * do DMA address check in tg3_start_xmit().
+ */
+ if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
+ persist_dma_mask = dma_mask = DMA_32BIT_MASK;
+ else if (tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) {
+ persist_dma_mask = dma_mask = DMA_40BIT_MASK;
+#ifdef CONFIG_HIGHMEM
+ dma_mask = DMA_64BIT_MASK;
+#endif
+ } else
+ persist_dma_mask = dma_mask = DMA_64BIT_MASK;
+
+ /* Configure DMA attributes. */
+ if (dma_mask > DMA_32BIT_MASK) {
+ err = pci_set_dma_mask(pdev, dma_mask);
+ if (!err) {
+ dev->features |= NETIF_F_HIGHDMA;
+ err = pci_set_consistent_dma_mask(pdev,
+ persist_dma_mask);
+ if (err < 0) {
+ printk(KERN_ERR PFX "Unable to obtain 64 bit "
+ "DMA for consistent allocations\n");
+ goto err_out_iounmap;
+ }
+ }
+ }
+ if (err || dma_mask == DMA_32BIT_MASK) {
+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (err) {
+ printk(KERN_ERR PFX "No usable DMA configuration, "
+ "aborting.\n");
+ goto err_out_iounmap;
+ }
+ }
+
tg3_init_bufmgr_config(tp);
#if TG3_TSO_SUPPORT != 0
} else
tp->tg3_flags &= ~TG3_FLAG_RX_CHECKSUMS;
- if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
- dev->features &= ~NETIF_F_HIGHDMA;
-
/* flow control autonegotiation is default behavior */
tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
(tp->tg3_flags & TG3_FLAG_SPLIT_MODE) != 0,
(tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0,
(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
- printk(KERN_INFO "%s: dma_rwctrl[%08x]\n",
- dev->name, tp->dma_rwctrl);
+ printk(KERN_INFO "%s: dma_rwctrl[%08x] dma_mask[%d-bit]\n",
+ dev->name, tp->dma_rwctrl,
+ (pdev->dma_mask == DMA_32BIT_MASK) ? 32 :
+ (((u64) pdev->dma_mask == DMA_40BIT_MASK) ? 40 : 64));
return 0;
#define TG3_FLAG_10_100_ONLY 0x01000000
#define TG3_FLAG_PAUSE_AUTONEG 0x02000000
#define TG3_FLAG_IN_RESET_TASK 0x04000000
+#define TG3_FLAG_40BIT_DMA_BUG 0x08000000
#define TG3_FLAG_BROKEN_CHECKSUMS 0x10000000
#define TG3_FLAG_GOT_SERDES_FLOWCTL 0x20000000
#define TG3_FLAG_SPLIT_MODE 0x40000000
{
struct de_private *de = dev->priv;
int rc;
- unsigned long flags;
if (netif_msg_ifup(de))
printk(KERN_DEBUG "%s: enabling interface\n", dev->name);
return rc;
}
- rc = de_init_hw(de);
- if (rc) {
- printk(KERN_ERR "%s: h/w init failure, err=%d\n",
- dev->name, rc);
- goto err_out_free;
- }
+ dw32(IntrMask, 0);
rc = request_irq(dev->irq, de_interrupt, SA_SHIRQ, dev->name, dev);
if (rc) {
printk(KERN_ERR "%s: IRQ %d request failure, err=%d\n",
dev->name, dev->irq, rc);
- goto err_out_hw;
+ goto err_out_free;
+ }
+
+ rc = de_init_hw(de);
+ if (rc) {
+ printk(KERN_ERR "%s: h/w init failure, err=%d\n",
+ dev->name, rc);
+ goto err_out_free_irq;
}
netif_start_queue(dev);
return 0;
-err_out_hw:
- spin_lock_irqsave(&de->lock, flags);
- de_stop_hw(de);
- spin_unlock_irqrestore(&de->lock, flags);
-
+err_out_free_irq:
+ free_irq(dev->irq, dev);
err_out_free:
de_free_rings(de);
return rc;
synchronize_irq(dev->irq);
de_clean_rings(de);
+ de_init_rings(de);
+
de_init_hw(de);
netif_wake_queue(dev);
if (align)
skb_reserve(skb, align);
- if (memcpy_fromiovec(skb_put(skb, len), iv, len))
+ if (memcpy_fromiovec(skb_put(skb, len), iv, len)) {
+ tun->stats.rx_dropped++;
+ kfree_skb(skb);
return -EFAULT;
+ }
skb->dev = tun->dev;
switch (tun->flags & TUN_TYPE_MASK) {
for (i = 0; i < vptr->options.numrx; i++) {
struct velocity_rd_info *rd_info = &(vptr->rd_info[i]);
+ struct rx_desc *rd = vptr->rd_ring + i;
+
+ memset(rd, 0, sizeof(*rd));
if (!rd_info->skb)
continue;
PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777),
PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000),
PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002),
- PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030b),
PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010),
+ PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "INTERSIL",
+ 0x74c5e40d),
+ PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "Intersil",
+ 0x4b801a17),
PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus",
0x7a954bd9, 0x74be00c6),
PCMCIA_DEVICE_PROD_ID1234(
{
struct parport_pc_pci *card;
struct parport_serial_private *priv = pci_get_drvdata (dev);
- int i = id->driver_data, n;
- int success = 0;
+ int n, success = 0;
priv->par = cards[id->driver_data];
card = &priv->par;
"hi" as an offset (see SYBA
def.) */
/* TODO: test if sharing interrupts works */
- printk (KERN_DEBUG "PCI parallel port detected: %04x:%04x, "
- "I/O at %#lx(%#lx)\n",
- parport_serial_pci_tbl[i].vendor,
- parport_serial_pci_tbl[i].device, io_lo, io_hi);
+ dev_dbg(&dev->dev, "PCI parallel port detected: I/O at "
+ "%#lx(%#lx)\n", io_lo, io_hi);
port = parport_pc_probe_port (io_lo, io_hi, PARPORT_IRQ_NONE,
PARPORT_DMA_NONE, dev);
if (port) {
if (card->postinit_hook)
card->postinit_hook (dev, card, !success);
- return success ? 0 : 1;
+ return 0;
}
static int __devinit parport_serial_pci_probe (struct pci_dev *dev,
kfree(p_dev);
}
+static void pcmcia_add_pseudo_device(struct pcmcia_socket *s)
+{
+ if (!s->pcmcia_state.device_add_pending) {
+ s->pcmcia_state.device_add_pending = 1;
+ schedule_work(&s->device_add);
+ }
+ return;
+}
static int pcmcia_device_probe(struct device * dev)
{
struct pcmcia_device *p_dev;
struct pcmcia_driver *p_drv;
+ struct pcmcia_device_id *did;
struct pcmcia_socket *s;
int ret = 0;
}
ret = p_drv->probe(p_dev);
+ if (ret)
+ goto put_module;
+
+ /* handle pseudo multifunction devices:
+ * there are at most two pseudo multifunction devices.
+ * if we're matching against the first, schedule a
+ * call which will then check whether there are two
+ * pseudo devices, and if not, add the second one.
+ */
+ did = (struct pcmcia_device_id *) p_dev->dev.driver_data;
+ if (did && (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) &&
+ (p_dev->socket->device_count == 1) && (p_dev->device_no == 0))
+ pcmcia_add_pseudo_device(p_dev->socket);
put_module:
if (ret)
s->pcmcia_state.device_add_pending = 0;
}
-static inline void pcmcia_add_pseudo_device(struct pcmcia_socket *s)
-{
- if (!s->pcmcia_state.device_add_pending) {
- s->pcmcia_state.device_add_pending = 1;
- schedule_work(&s->device_add);
- }
- return;
-}
-
static int pcmcia_requery(struct device *dev, void * _data)
{
struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
}
if (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) {
- /* handle pseudo multifunction devices:
- * there are at most two pseudo multifunction devices.
- * if we're matching against the first, schedule a
- * call which will then check whether there are two
- * pseudo devices, and if not, add the second one.
- */
- if (dev->device_no == 0)
- pcmcia_add_pseudo_device(dev->socket);
-
if (dev->device_no != did->device_no)
return 0;
}
down_write(&dev->dev.bus->subsys.rwsem);
dev->card_link = clink;
dev->dev.driver = &drv->link.driver;
- if (drv->link.driver.probe) {
- if (drv->link.driver.probe(&dev->dev)) {
- dev->dev.driver = NULL;
- dev->card_link = NULL;
- up_write(&dev->dev.bus->subsys.rwsem);
- return NULL;
- }
+ if (pnp_bus_type.probe(&dev->dev)) {
+ dev->dev.driver = NULL;
+ dev->card_link = NULL;
+ up_write(&dev->dev.bus->subsys.rwsem);
+ return NULL;
}
device_bind_driver(&dev->dev);
up_write(&dev->dev.bus->subsys.rwsem);
* interrupt for this detection ccw uses the kernel event daemon to
* trigger the call to dasd_change_state. All this is done in the
* discipline code, see dasd_eckd.c.
- * After the analysis ccw is done (do_analysis returned 0 or error)
- * the block device is setup. Either a fake disk is added to allow
- * formatting or a proper device request queue is created.
+ * After the analysis ccw is done (do_analysis returned 0) the block
+ * device is setup.
+ * In case the analysis returns an error, the device setup is stopped
+ * (a fake disk was already added to allow formatting).
*/
static inline int
dasd_state_basic_to_ready(struct dasd_device * device)
rc = 0;
if (device->discipline->do_analysis != NULL)
rc = device->discipline->do_analysis(device);
- if (rc)
+ if (rc) {
+ if (rc != -EAGAIN)
+ device->state = DASD_STATE_UNFMT;
return rc;
+ }
+ /* make disk known with correct capacity */
dasd_setup_queue(device);
+ set_capacity(device->gdp, device->blocks << device->s2b_shift);
device->state = DASD_STATE_READY;
- if (dasd_scan_partitions(device) != 0)
+ rc = dasd_scan_partitions(device);
+ if (rc)
device->state = DASD_STATE_BASIC;
- return 0;
+ return rc;
}
/*
device->state = DASD_STATE_BASIC;
}
+/*
+ * Back to basic.
+ */
+static inline void
+dasd_state_unfmt_to_basic(struct dasd_device * device)
+{
+ device->state = DASD_STATE_BASIC;
+}
+
/*
* Make the device online and schedule the bottom half to start
* the requeueing of requests from the linux request queue to the
if (device->state == DASD_STATE_READY &&
device->target <= DASD_STATE_BASIC)
dasd_state_ready_to_basic(device);
-
- if (device->state == DASD_STATE_BASIC &&
+
+ if (device->state == DASD_STATE_UNFMT &&
+ device->target <= DASD_STATE_BASIC)
+ dasd_state_unfmt_to_basic(device);
+
+ if (device->state == DASD_STATE_BASIC &&
device->target <= DASD_STATE_KNOWN)
dasd_state_basic_to_known(device);
goto out;
}
- if (device->state < DASD_STATE_BASIC) {
+ if (device->state <= DASD_STATE_BASIC) {
DBF_DEV_EVENT(DBF_ERR, device, " %s",
" Cannot open unrecognized device");
rc = -ENODEV;
{
struct block_device *bdev;
- /* Make the disk known. */
- set_capacity(device->gdp, device->blocks << device->s2b_shift);
bdev = bdget_disk(device->gdp, 0);
if (!bdev || blkdev_get(bdev, FMODE_READ, 1) < 0)
return -ENODEV;
* new: the dasd_device structure is allocated.
* known: the discipline for the device is identified.
* basic: the device can do basic i/o.
- * accept: the device is analysed (format is known).
+ * unfmt: the device could not be analyzed (format is unknown).
* ready: partition detection is done and the device is can do block io.
* online: the device accepts requests from the block device queue.
*
#define DASD_STATE_NEW 0
#define DASD_STATE_KNOWN 1
#define DASD_STATE_BASIC 2
-#define DASD_STATE_READY 3
-#define DASD_STATE_ONLINE 4
+#define DASD_STATE_UNFMT 3
+#define DASD_STATE_READY 4
+#define DASD_STATE_ONLINE 5
#include <linux/module.h>
#include <linux/wait.h>
case DASD_STATE_BASIC:
seq_printf(m, "basic");
break;
+ case DASD_STATE_UNFMT:
+ seq_printf(m, "unformatted");
+ break;
case DASD_STATE_READY:
case DASD_STATE_ONLINE:
seq_printf(m, "active ");
goto out;
}
switch (sda_area->response.code) {
+ case 0x0001: /* everything ok */
+ ret = 0;
+ break;
case 0x0003: /* invalid request block */
case 0x0007:
ret = -EINVAL;
case 0x0101: /* facility not provided */
ret = -EOPNOTSUPP;
break;
+ default: /* something went wrong */
+ ret = -EIO;
}
out:
free_page((unsigned long)sda_area);
/* -ENXIO: no more subchannels. */
case -ENXIO:
return ret;
+ /* -EIO: this subchannel set not supported. */
+ case -EIO:
+ return ret;
default:
return 0;
}
driver_unregister(&smsg_driver);
return -EIO; /* better errno ? */
}
- rc = iucv_connect (&smsg_pathid, 1, 0, "*MSG ", 0, 0, 0, 0,
+ rc = iucv_connect (&smsg_pathid, 255, 0, "*MSG ", 0, 0, 0, 0,
smsg_handle, 0);
if (rc) {
printk(KERN_ERR "SMSGIUCV: failed to connect to *MSG");
#define ZFCP_STATUS_UNIT_TEMPORARY 0x00000002
#define ZFCP_STATUS_UNIT_SHARED 0x00000004
#define ZFCP_STATUS_UNIT_READONLY 0x00000008
+#define ZFCP_STATUS_UNIT_REGISTERED 0x00000010
/* FSF request status (this does not have a common part) */
#define ZFCP_STATUS_FSFREQ_NOT_INIT 0x00000000
&& (!atomic_test_mask(ZFCP_STATUS_UNIT_TEMPORARY,
&unit->status))
&& !unit->device
- && port->rport)
- scsi_add_device(port->adapter->scsi_host, 0,
- port->rport->scsi_target_id,
- unit->scsi_lun);
+ && port->rport) {
+ atomic_set_mask(ZFCP_STATUS_UNIT_REGISTERED,
+ &unit->status);
+ scsi_scan_target(&port->rport->dev, 0,
+ port->rport->scsi_target_id,
+ unit->scsi_lun, 0);
+ }
zfcp_unit_put(unit);
break;
case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
eh_host_reset_handler: zfcp_scsi_eh_host_reset_handler,
/* FIXME(openfcp): Tune */
can_queue: 4096,
- this_id: 0,
+ this_id: -1,
/*
* FIXME:
* one less? can zfcp_create_sbale cope with it?
read_lock_irqsave(&zfcp_data.config_lock, flags);
unit = zfcp_unit_lookup(adapter, sdp->channel, sdp->id, sdp->lun);
- if (unit) {
+ if (unit && atomic_test_mask(ZFCP_STATUS_UNIT_REGISTERED,
+ &unit->status)) {
sdp->hostdata = unit;
unit->device = sdp;
zfcp_unit_get(unit);
struct zfcp_unit *unit = (struct zfcp_unit *) sdpnt->hostdata;
if (unit) {
+ atomic_clear_mask(ZFCP_STATUS_UNIT_REGISTERED, &unit->status);
sdpnt->hostdata = NULL;
unit->device = NULL;
zfcp_unit_put(unit);
"on port 0x%016Lx in recovery\n",
zfcp_get_busid_by_unit(unit),
unit->fcp_lun, unit->port->wwpn);
- retval = SCSI_MLQUEUE_DEVICE_BUSY;
+ zfcp_scsi_command_fail(scpnt, DID_NO_CONNECT);
goto out;
}
* Reset the bus
*
*/
-static int aha152x_bus_reset(Scsi_Cmnd *SCpnt)
+static int aha152x_bus_reset_host(struct Scsi_Host *shpnt)
{
- struct Scsi_Host *shpnt = SCpnt->device->host;
unsigned long flags;
DO_LOCK(flags);
#if defined(AHA152X_DEBUG)
if(HOSTDATA(shpnt)->debug & debug_eh) {
- printk(DEBUG_LEAD "aha152x_bus_reset(%p)", CMDINFO(SCpnt), SCpnt);
+ printk(KERN_DEBUG "scsi%d: bus reset", shpnt->host_no);
show_queues(shpnt);
}
#endif
free_hard_reset_SCs(shpnt, &ISSUE_SC);
free_hard_reset_SCs(shpnt, &DISCONNECTED_SC);
- DPRINTK(debug_eh, DEBUG_LEAD "resetting bus\n", CMDINFO(SCpnt));
+ DPRINTK(debug_eh, KERN_DEBUG "scsi%d: resetting bus\n", shpnt->host_no);
SETPORT(SCSISEQ, SCSIRSTO);
mdelay(256);
SETPORT(SCSISEQ, 0);
mdelay(DELAY);
- DPRINTK(debug_eh, DEBUG_LEAD "bus resetted\n", CMDINFO(SCpnt));
+ DPRINTK(debug_eh, KERN_DEBUG "scsi%d: bus resetted\n", shpnt->host_no);
setup_expected_interrupts(shpnt);
if(HOSTDATA(shpnt)->commands==0)
return SUCCESS;
}
+/*
+ * Reset the bus
+ *
+ */
+static int aha152x_bus_reset(Scsi_Cmnd *SCpnt)
+{
+ return aha152x_bus_reset_host(SCpnt->device->host);
+}
/*
* Restore default values to the AIC-6260 registers and reset the fifos
* Reset the host (bus and controller)
*
*/
-int aha152x_host_reset(Scsi_Cmnd * SCpnt)
+int aha152x_host_reset_host(struct Scsi_Host *shpnt)
{
-#if defined(AHA152X_DEBUG)
- struct Scsi_Host *shpnt = SCpnt->device->host;
-#endif
-
- DPRINTK(debug_eh, DEBUG_LEAD "aha152x_host_reset(%p)\n", CMDINFO(SCpnt), SCpnt);
+ DPRINTK(debug_eh, KERN_DEBUG "scsi%d: host reset\n", shpnt->host_no);
- aha152x_bus_reset(SCpnt);
+ aha152x_bus_reset_host(shpnt);
- DPRINTK(debug_eh, DEBUG_LEAD "resetting ports\n", CMDINFO(SCpnt));
- reset_ports(SCpnt->device->host);
+ DPRINTK(debug_eh, KERN_DEBUG "scsi%d: resetting ports\n", shpnt->host_no);
+ reset_ports(shpnt);
return SUCCESS;
}
+/*
+ * Reset the host (bus and controller)
+ *
+ */
+static int aha152x_host_reset(Scsi_Cmnd *SCpnt)
+{
+ return aha152x_host_reset_host(SCpnt->device->host);
+}
+
/*
* Return the "logical geometry"
*
{
int i;
for (i = 0; i<ARRAY_SIZE(aha152x_host); i++) {
- struct Scsi_Host *shpnt = aha152x_host[i];
- if (shpnt && HOSTDATA(shpnt)->service) {
- HOSTDATA(shpnt)->service=0;
- is_complete(shpnt);
- }
+ is_complete(aha152x_host[i]);
}
}
/*
- * Interrupts handler
+ * Interrupt handler
*
*/
-
static irqreturn_t intr(int irqno, void *dev_id, struct pt_regs *regs)
{
struct Scsi_Host *shpnt = lookup_irq(irqno);
+ unsigned long flags;
unsigned char rev, dmacntrl0;
if (!shpnt) {
if ((rev == 0xFF) && (dmacntrl0 == 0xFF))
return IRQ_NONE;
+ if( TESTLO(DMASTAT, INTSTAT) )
+ return IRQ_NONE;
+
/* no more interrupts from the controller, while we're busy.
INTEN is restored by the BH handler */
CLRBITS(DMACNTRL0, INTEN);
-#if 0
- /* check if there is already something to be
- serviced; should not happen */
- if(HOSTDATA(shpnt)->service) {
- printk(KERN_ERR "aha152x%d: lost interrupt (%d)\n", HOSTNO, HOSTDATA(shpnt)->service);
- show_queues(shpnt);
+ DO_LOCK(flags);
+ if( HOSTDATA(shpnt)->service==0 ) {
+ HOSTDATA(shpnt)->service=1;
+
+ /* Poke the BH handler */
+ INIT_WORK(&aha152x_tq, (void *) run, NULL);
+ schedule_work(&aha152x_tq);
}
-#endif
-
- /* Poke the BH handler */
- HOSTDATA(shpnt)->service++;
- INIT_WORK(&aha152x_tq, (void *) run, NULL);
- schedule_work(&aha152x_tq);
+ DO_UNLOCK(flags);
+
return IRQ_HANDLED;
}
unsigned long flags;
int pending;
+ if(!shpnt)
+ return;
+
DO_LOCK(flags);
+
+ if( HOSTDATA(shpnt)->service==0 ) {
+ DO_UNLOCK(flags);
+ return;
+ }
+
+ HOSTDATA(shpnt)->service = 0;
+
if(HOSTDATA(shpnt)->in_intr) {
DO_UNLOCK(flags);
/* aha152x_error never returns.. */
struct Scsi_Host *aha152x_probe_one(struct aha152x_setup *);
void aha152x_release(struct Scsi_Host *);
-int aha152x_host_reset(Scsi_Cmnd *);
+int aha152x_host_reset_host(struct Scsi_Host *);
#endif /* _AHA152X_H */
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
if (!ahci_host_intr(ap, qc))
- if (ata_ratelimit()) {
- struct pci_dev *pdev =
- to_pci_dev(ap->host_set->dev);
- dev_printk(KERN_WARNING, &pdev->dev,
+ if (ata_ratelimit())
+ dev_printk(KERN_WARNING, host_set->dev,
"unhandled interrupt on port %u\n",
i);
- }
VPRINTK("port %u\n", i);
} else {
VPRINTK("port %u (no irq)\n", i);
- if (ata_ratelimit()) {
- struct pci_dev *pdev =
- to_pci_dev(ap->host_set->dev);
- dev_printk(KERN_WARNING, &pdev->dev,
+ if (ata_ratelimit())
+ dev_printk(KERN_WARNING, host_set->dev,
"interrupt on disabled port %u\n", i);
- }
}
irq_ack |= (1 << i);
return 0;
}
-static struct scsi_host_template driver_template = {
- .proc_name = "jazz_esp",
- .proc_info = &esp_proc_info,
- .name = "ESP 100/100a/200",
- .detect = jazz_esp_detect,
- .slave_alloc = esp_slave_alloc,
- .slave_destroy = esp_slave_destroy,
- .release = jazz_esp_release,
- .info = esp_info,
- .queuecommand = esp_queue,
- .eh_abort_handler = esp_abort,
- .eh_bus_reset_handler = esp_reset,
- .can_queue = 7,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = DISABLE_CLUSTERING,
-};
-
-#include "scsi_module.c"
-
/***************************************************************** Detection */
static int jazz_esp_detect(struct scsi_host_template *tpnt)
{
module_param(atapi_enabled, int, 0444);
MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
+int libata_fua = 0;
+module_param_named(fua, libata_fua, int, 0444);
+MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
+
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
MODULE_LICENSE("GPL");
{
unsigned char model[41], fw[9];
+ if (!libata_fua)
+ return 0;
if (!ata_id_has_fua(id))
return 0;
/* libata-core.c */
extern int atapi_enabled;
+extern int libata_fua;
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
struct ata_device *dev);
extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc);
return 0;
}
+static int megasas_slave_configure(struct scsi_device *sdev)
+{
+ /*
+ * Don't export physical disk devices to the disk driver.
+ *
+ * FIXME: Currently we don't export them to the midlayer at all.
+ * That will be fixed once LSI engineers have audited the
+ * firmware for possible issues.
+ */
+ if (sdev->channel < MEGASAS_MAX_PD_CHANNELS && sdev->type == TYPE_DISK)
+ return -ENXIO;
+ return 0;
+}
+
/**
* megasas_wait_for_outstanding - Wait for all outstanding cmds
* @instance: Adapter soft state
.module = THIS_MODULE,
.name = "LSI Logic SAS based MegaRAID driver",
.proc_name = "megaraid_sas",
+ .slave_configure = megasas_slave_configure,
.queuecommand = megasas_queue_command,
.eh_device_reset_handler = megasas_reset_device,
.eh_bus_reset_handler = megasas_reset_bus_host,
break;
}
- /*
- * Don't export physical disk devices to mid-layer.
- */
- if (!MEGASAS_IS_LOGICAL(cmd->scmd) &&
- (hdr->cmd_status == MFI_STAT_OK) &&
- (cmd->scmd->cmnd[0] == INQUIRY)) {
-
- if (((*(u8 *) cmd->scmd->request_buffer) & 0x1F) ==
- TYPE_DISK) {
- cmd->scmd->result = DID_BAD_TARGET << 16;
- exception = 1;
- }
- }
-
case MFI_CMD_LD_READ:
case MFI_CMD_LD_WRITE:
config PCMCIA_AHA152X
tristate "Adaptec AHA152X PCMCIA support"
depends on m && !64BIT
+ select SCSI_SPI_ATTRS
help
Say Y here if you intend to attach this type of PCMCIA SCSI host
adapter to your computer.
link->state &= ~DEV_SUSPEND;
if (link->state & DEV_CONFIG) {
- Scsi_Cmnd tmp;
pcmcia_request_configuration(link->handle, &link->conf);
- tmp.device->host = info->host;
- aha152x_host_reset(&tmp);
+ aha152x_host_reset_host(info->host);
}
return 0;
#define DRV_VERSION "0.9"
enum {
+ SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29),
SIL_FLAG_MOD15WRITE = (1 << 30),
sil_3112 = 0,
sil_3112_m15w = 1,
- sil_3114 = 2,
+ sil_3512 = 2,
+ sil_3114 = 3,
SIL_FIFO_R0 = 0x40,
SIL_FIFO_W0 = 0x41,
static const struct pci_device_id sil_pci_tbl[] = {
{ 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
{ 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
- { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+ { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 },
{ 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
{ 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
{ 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
- }, /* sil_3112_15w - keep it sync'd w/ sil_3112 */
+ },
+ /* sil_3112_15w - keep it sync'd w/ sil_3112 */
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
- }, /* sil_3114 */
+ },
+ /* sil_3512 */
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO,
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
+ SIL_FLAG_RERR_ON_DMA_ACT,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x3f, /* udma0-5 */
+ .port_ops = &sil_ops,
+ },
+ /* sil_3114 */
+ {
+ .sht = &sil_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
+ SIL_FLAG_RERR_ON_DMA_ACT,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
unsigned long scr; /* SATA control register block */
unsigned long sien; /* SATA Interrupt Enable register */
unsigned long xfer_mode;/* data transfer mode register */
+ unsigned long sfis_cfg; /* SATA FIS reception config register */
} sil_port[] = {
/* port 0 ... */
- { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4 },
- { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4 },
- { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4 },
- { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4 },
+ { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4, 0x14c },
+ { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4, 0x1cc },
+ { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4, 0x34c },
+ { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4, 0x3cc },
/* ... port 3 */
};
dev_printk(KERN_WARNING, &pdev->dev,
"cache line size not set. Driver may not function\n");
+ /* Apply R_ERR on DMA activate FIS errata workaround */
+ if (probe_ent->host_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
+ int cnt;
+
+ for (i = 0, cnt = 0; i < probe_ent->n_ports; i++) {
+ tmp = readl(mmio_base + sil_port[i].sfis_cfg);
+ if ((tmp & 0x3) != 0x01)
+ continue;
+ if (!cnt)
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Applying R_ERR on DMA activate "
+ "FIS errata fix\n");
+ writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
+ cnt++;
+ }
+ }
+
if (ent->driver_data == sil_3114) {
irq_mask = SIL_MASK_4PORT;
{"ADAPTEC", "Adaptec 5400S", NULL, BLIST_FORCELUN},
{"AFT PRO", "-IX CF", "0.0>", BLIST_FORCELUN},
{"BELKIN", "USB 2 HS-CF", "1.95", BLIST_FORCELUN | BLIST_INQUIRY_36},
+ {"BROWNIE", "1600U3P", NULL, BLIST_NOREPORTLUN},
{"CANON", "IPUBJD", NULL, BLIST_SPARSELUN},
{"CBOX3", "USB Storage-SMC", "300A", BLIST_FORCELUN | BLIST_INQUIRY_36},
{"CMD", "CRA-7280", NULL, BLIST_SPARSELUN}, /* CMD RAID Controller */
* the request was not marked fast fail. Note that above,
* even if the request is marked fast fail, we still requeue
* for queue congestion conditions (QUEUE_FULL or BUSY) */
- if ((++scmd->retries) < scmd->allowed
+ if ((++scmd->retries) <= scmd->allowed
&& !blk_noretry_request(scmd->request)) {
return NEEDS_RETRY;
} else {
list_del_init(&scmd->eh_entry);
if (scsi_device_online(scmd->device) &&
!blk_noretry_request(scmd->request) &&
- (++scmd->retries < scmd->allowed)) {
+ (++scmd->retries <= scmd->allowed)) {
SCSI_LOG_ERROR_RECOVERY(3, printk("%s: flush"
" retry cmd: %p\n",
current->comm,
static void scsi_softirq_done(struct request *rq)
{
struct scsi_cmnd *cmd = rq->completion_data;
- unsigned long wait_for = cmd->allowed * cmd->timeout_per_command;
+ unsigned long wait_for = (cmd->allowed + 1) * cmd->timeout_per_command;
int disposition;
INIT_LIST_HEAD(&cmd->eh_entry);
transport_configure_device(&sdev->sdev_gendev);
- if (sdev->host->hostt->slave_configure)
- sdev->host->hostt->slave_configure(sdev);
+ if (sdev->host->hostt->slave_configure) {
+ int ret = sdev->host->hostt->slave_configure(sdev);
+ if (ret) {
+ /*
+ * if LLDD reports slave not present, don't clutter
+ * console with alloc failure messages
+ */
+ if (ret != -ENXIO) {
+ sdev_printk(KERN_ERR, sdev,
+ "failed to configure device\n");
+ }
+ return SCSI_SCAN_NO_RESPONSE;
+ }
+ }
/*
* Ok, the device is now all set up, we can
*/
#define FC_STARGET_NUM_ATTRS 3
#define FC_RPORT_NUM_ATTRS 9
-#define FC_HOST_NUM_ATTRS 16
+#define FC_HOST_NUM_ATTRS 17
struct fc_internal {
struct scsi_transport_template t;
}
/* Search the bindings array */
- if (likely((ids->roles & FC_RPORT_ROLE_FCP_TARGET) &&
- (fc_host_tgtid_bind_type(shost) != FC_TGTID_BIND_NONE))) {
+ if (fc_host_tgtid_bind_type(shost) != FC_TGTID_BIND_NONE) {
/* search for a matching consistent binding */
srp->res_used = 1;
SCSI_LOG_TIMEOUT(4, printk("sg_link_reserve: size=%d\n", size));
- rem = size = (size + 1) & (~1); /* round to even for aha1542 */
+ rem = size;
for (k = 0; k < rsv_schp->k_use_sg; ++k, ++sg) {
num = sg->length;
SDev = cd->device;
if (!sense) {
- sense = kmalloc(sizeof(*sense), GFP_KERNEL);
+ sense = kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
if (!sense) {
err = -ENOMEM;
goto out;
tp->usrflags |= (SYM_DISC_ENABLED | SYM_TAGS_ENABLED);
tp->usrtags = SYM_SETUP_MAX_TAG;
+ tp->usr_width = np->maxwide;
+ tp->usr_period = 9;
sym_nvram_setup_target(tp, i, nvram);
int read_count, request_count = IOC4_MAX_CHARS;
struct uart_icount *icount;
struct uart_info *info = the_port->info;
- int flip = 0;
unsigned long pflags;
/* Make sure all the pointers are "good" ones */
spin_lock_irqsave(&the_port->lock, pflags);
tty = info->tty;
- request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS - 2);
+ request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS);
if (request_count > 0) {
icount = &the_port->icount;
spin_unlock_irqrestore(&the_port->lock, pflags);
- if (flip)
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(tty);
}
/**
if (up->port.info == NULL)
goto ack_tx_int;
xmit = &up->port.info->xmit;
- if (uart_circ_empty(xmit)) {
- uart_write_wakeup(&up->port);
+ if (uart_circ_empty(xmit))
goto ack_tx_int;
- }
if (uart_tx_stopped(&up->port))
goto ack_tx_int;
void uart_write_wakeup(struct uart_port *port)
{
struct uart_info *info = port->info;
+ /*
+ * This means you called this function _after_ the port was
+ * closed. No cookie for you.
+ */
+ BUG_ON(!info);
tasklet_schedule(&info->tlet);
}
}
static int
-uart_write(struct tty_struct *tty, const unsigned char * buf, int count)
+uart_write(struct tty_struct *tty, const unsigned char *buf, int count)
{
struct uart_state *state = tty->driver_data;
- struct uart_port *port = state->port;
- struct circ_buf *circ = &state->info->xmit;
+ struct uart_port *port;
+ struct circ_buf *circ;
unsigned long flags;
int c, ret = 0;
+ /*
+ * This means you called this function _after_ the port was
+ * closed. No cookie for you.
+ */
+ if (!state || !state->info) {
+ WARN_ON(1);
+ return -EL3HLT;
+ }
+
+ port = state->port;
+ circ = &state->info->xmit;
+
if (!circ->buf)
return 0;
struct uart_port *port = state->port;
unsigned long flags;
+ /*
+ * This means you called this function _after_ the port was
+ * closed. No cookie for you.
+ */
+ if (!state || !state->info) {
+ WARN_ON(1);
+ return;
+ }
+
DPRINTK("uart_flush_buffer(%d) called\n", tty->index);
spin_lock_irqsave(&port->lock, flags);
int retval;
if (!ia64_platform_is("sn2"))
- return -ENODEV;
+ return 0;
printk(KERN_INFO "sn_console: Console driver init\n");
static void sunsu_stop_rx(struct uart_port *port)
{
struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
- unsigned long flags;
- spin_lock_irqsave(&up->port.lock, flags);
up->ier &= ~UART_IER_RLSI;
up->port.read_status_mask &= ~UART_LSR_DR;
serial_out(up, UART_IER, up->ier);
- spin_unlock_irqrestore(&up->port.lock, flags);
}
static void sunsu_enable_ms(struct uart_port *port)
#
menu "SN Devices"
+ depends on SGI_SN
config SGI_IOC4
tristate "SGI IOC4 Base IO support"
- depends on (IA64_GENERIC || IA64_SGI_SN2) && MMTIMER
+ depends on MMTIMER
default m
---help---
This option enables basic support for the SGI IOC4-based Base IO
config SGI_IOC3
tristate "SGI IOC3 Base IO support"
- depends on (IA64_GENERIC || IA64_SGI_SN2)
default m
---help---
This option enables basic support for the SGI IOC3-based Base IO
return presence;
}
-static inline int nic_read_bit(struct ioc3_driver_data *idd)
+static int nic_read_bit(struct ioc3_driver_data *idd)
{
int result;
unsigned long flags;
return result;
}
-static inline void nic_write_bit(struct ioc3_driver_data *idd, int bit)
+static void nic_write_bit(struct ioc3_driver_data *idd, int bit)
{
if (bit)
writel(mcr_pack(6, 110), &idd->vma->mcr);
/* Interrupts */
-static inline void
-write_ireg(struct ioc3_driver_data *idd, uint32_t val, int which)
+static void write_ireg(struct ioc3_driver_data *idd, uint32_t val, int which)
{
unsigned long flags;
}
/* Add this IOC3 to all submodules */
- read_lock(&ioc3_submodules_lock);
for(id=0;id<IOC3_MAX_SUBMODULES;id++)
if(ioc3_submodules[id] && ioc3_submodules[id]->probe) {
idd->active[id] = 1;
idd->active[id] = !ioc3_submodules[id]->probe
(ioc3_submodules[id], idd);
}
- read_unlock(&ioc3_submodules_lock);
printk(KERN_INFO "IOC3 Master Driver loaded for %s\n", pci_name(pdev));
idd = pci_get_drvdata(pdev);
/* Remove this IOC3 from all submodules */
- read_lock(&ioc3_submodules_lock);
for(id=0;id<IOC3_MAX_SUBMODULES;id++)
if(idd->active[id]) {
if(ioc3_submodules[id] && ioc3_submodules[id]->remove)
pci_name(pdev));
idd->active[id] = 0;
}
- read_unlock(&ioc3_submodules_lock);
/* Clear and disable all IRQs */
write_ireg(idd, ~0, IOC3_W_IEC);
ep->pio_irqs = 0;
ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+ spin_unlock_irqrestore(&ep->dev->lock, flags);
+
/* Reset halt state (does flush) */
lh7a40x_set_halt(_ep, 0);
- spin_unlock_irqrestore(&ep->dev->lock, flags);
-
DEBUG("%s: enabled %s\n", __FUNCTION__, _ep->name);
return 0;
}
break;
qep = &dev->ep[ep_num];
+ spin_unlock(&dev->lock);
if (ctrl.bRequest == USB_REQ_SET_FEATURE) {
DEBUG_SETUP("SET_FEATURE (%d)\n",
ep_num);
ep_num);
lh7a40x_set_halt(&qep->ep, 0);
}
+ spin_lock(&dev->lock);
usb_set_index(0);
/* Reply with a ZLP on next IN token */
// DEBUG("%s: OID = %08X\n", __FUNCTION__, cpu_to_le32(buf->OID));
if (!rndis_per_dev_params [configNr].dev) return -ENOTSUPP;
- /*
- * we need more memory:
- * oid_supported_list is the largest answer
+ /*
+ * we need more memory:
+ * gen_ndis_query_resp expects enough space for
+ * rndis_query_cmplt_type followed by data.
+ * oid_supported_list is the largest data reply
*/
- r = rndis_add_response (configNr, sizeof (oid_supported_list));
+ r = rndis_add_response (configNr,
+ sizeof (oid_supported_list) + sizeof(rndis_query_cmplt_type));
if (!r)
return -ENOMEM;
resp = (rndis_query_cmplt_type *) r->buf;
offset + EHCI_USBLEGCTLSTS,
val | EHCI_USBLEGCTLSTS_SOOE);
#endif
- }
- /* always say Linux will own the hardware
- * by setting EHCI_USBLEGSUP_OS.
- */
- pci_write_config_byte(pdev, offset + 3, 1);
+ /* some systems get upset if this semaphore is
+ * set for any other reason than forcing a BIOS
+ * handoff..
+ */
+ pci_write_config_byte(pdev, offset + 3, 1);
+ }
/* if boot firmware now owns EHCI, spin till
* it hands it over.
#define USB_VENDOR_ID_WISEGROUP 0x0925
#define USB_DEVICE_ID_1_PHIDGETSERVO_20 0x8101
#define USB_DEVICE_ID_4_PHIDGETSERVO_20 0x8104
+#define USB_DEVICE_ID_DUAL_USB_JOYPAD 0x8866
#define USB_VENDOR_ID_CODEMERCS 0x07c0
#define USB_DEVICE_ID_CODEMERCS_IOW40 0x1500
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET},
{ USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_POWERMOUSE, HID_QUIRK_2WHEEL_POWERMOUSE },
{ USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
/*
* microHAM product IDs (http://www.microham.com).
- * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>.
+ * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
+ * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
+ * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
*/
+#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */
+#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */
#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */
#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */
+#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */
+#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */
+#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */
+#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */
/*
* Active Robots product ids.
down(&port->sem);
- if (port->open_count == 0)
- goto out;
+ if (port->open_count == 0) {
+ up(&port->sem);
+ return;
+ }
--port->open_count;
if (port->open_count == 0) {
module_put(port->serial->type->driver.owner);
}
- kref_put(&port->serial->kref, destroy_serial);
-
-out:
up(&port->sem);
+ kref_put(&port->serial->kref, destroy_serial);
}
static int serial_write (struct tty_struct * tty, const unsigned char *buf, int count)
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+ { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID),
+ .driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID),
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID) },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID) },
+ { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID) },
#define PALM_ZIRE_ID 0x0070
#define PALM_M100_ID 0x0080
+#define GSPDA_VENDOR_ID 0x115e
+#define GSPDA_XPLORE_M68_ID 0xf100
+
#define SONY_VENDOR_ID 0x054C
#define SONY_CLIE_3_5_ID 0x0038
#define SONY_CLIE_4_0_ID 0x0066
"Flashgate",
US_SC_SCSI, US_PR_BULK, NULL, 0 ),
+/* Reported by David Hamilton <niftimusmaximus@lycos.com> */
+UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001,
+ "Thomson Multimedia Inc.",
+ "RCA RD1080 MP3 Player",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200,
"Sandisk",
"ImageMate SDDR-05a",
{
unsigned char *src;
unsigned int xindex, yindex, chipindex, linesize;
- int i, count;
+ int i;
unsigned char val;
unsigned char bitmask, rightshift;
}
ks108_writeb_data(par, chipindex, val);
left++;
- count++;
if (bitmask == 0x80) {
bitmask = 1;
src++;
inode = file->f_dentry->d_inode;
fbidx = iminor(inode);
info = registered_fb[fbidx];
- par = info->par;
if (!info || !info->screen_base)
return -ENODEV;
+ par = info->par;
xres = info->var.xres;
fbmemlength = (xres * info->var.yres)/8;
unsigned char post_dividers[] = {1,2,4,8,3,6,12};
u32 output_freq;
u32 vclk; /* in .01 MHz */
- int i;
+ int i = 0;
u32 n, d;
vclk = 100000000 / period_in_ps; /* convert units to 10 kHz */
/* now, find an acceptable divider */
for (i = 0; i < sizeof(post_dividers); i++) {
output_freq = post_dividers[i] * vclk;
- if (output_freq >= c.ppll_min && output_freq <= c.ppll_max)
+ if (output_freq >= c.ppll_min && output_freq <= c.ppll_max) {
+ pll->post_divider = post_dividers[i];
break;
+ }
}
/* calculate feedback divider */
n = c.ref_divider * output_freq;
d = c.ref_clk;
- pll->post_divider = post_dividers[i];
pll->feedback_divider = round_div(n, d);
pll->vclk = vclk;
s1[i] = *s;
i++;
}
+
+ if (i > 4)
+ i = 4;
+
} while (*s++);
if (second)
s2[i] = 0;
new_bd = kmalloc(sizeof(struct backlight_device), GFP_KERNEL);
if (unlikely(!new_bd))
- return ERR_PTR(ENOMEM);
+ return ERR_PTR(-ENOMEM);
init_MUTEX(&new_bd->sem);
new_bd->props = bp;
new_ld = kmalloc(sizeof(struct lcd_device), GFP_KERNEL);
if (unlikely(!new_ld))
- return ERR_PTR(ENOMEM);
+ return ERR_PTR(-ENOMEM);
init_MUTEX(&new_ld->sem);
new_ld->props = lp;
default:
printk(KERN_INFO "imsttfb: Device 0x%x unknown, "
"contact maintainer.\n", pdev->device);
+ release_mem_region(addr, size);
+ framebuffer_release(info);
return -ENODEV;
}
if (regno > 255)
return 1;
- switch (dinfo->depth) {
- case 8:
- {
- red >>= 8;
- green >>= 8;
- blue >>= 8;
+ if (dinfo->depth == 8) {
+ red >>= 8;
+ green >>= 8;
+ blue >>= 8;
+
+ intelfbhw_setcolreg(dinfo, regno, red, green, blue,
+ transp);
+ }
- intelfbhw_setcolreg(dinfo, regno, red, green, blue,
- transp);
+ if (regno < 16) {
+ switch (dinfo->depth) {
+ case 15:
+ dinfo->pseudo_palette[regno] = ((red & 0xf800) >> 1) |
+ ((green & 0xf800) >> 6) |
+ ((blue & 0xf800) >> 11);
+ break;
+ case 16:
+ dinfo->pseudo_palette[regno] = (red & 0xf800) |
+ ((green & 0xfc00) >> 5) |
+ ((blue & 0xf800) >> 11);
+ break;
+ case 24:
+ dinfo->pseudo_palette[regno] = ((red & 0xff00) << 8) |
+ (green & 0xff00) |
+ ((blue & 0xff00) >> 8);
+ break;
}
- break;
- case 15:
- dinfo->pseudo_palette[regno] = ((red & 0xf800) >> 1) |
- ((green & 0xf800) >> 6) |
- ((blue & 0xf800) >> 11);
- break;
- case 16:
- dinfo->pseudo_palette[regno] = (red & 0xf800) |
- ((green & 0xfc00) >> 5) |
- ((blue & 0xf800) >> 11);
- break;
- case 24:
- dinfo->pseudo_palette[regno] = ((red & 0xff00) << 8) |
- (green & 0xff00) |
- ((blue & 0xff00) >> 8);
- break;
}
+
return 0;
}
void DisableVGA(volatile STG4000REG __iomem *pSTGReg)
{
u32 tmp;
- volatile u32 count, i;
+ volatile u32 count = 0, i;
/* Reset the VGA registers */
tmp = STG_READ_REG(SoftwareReset);
static inline int neo2200_sync(struct fb_info *info)
{
struct neofb_par *par = info->par;
- int waitcycles;
- while (readl(&par->neo2200->bltStat) & 1)
- waitcycles++;
+ while (readl(&par->neo2200->bltStat) & 1);
return 0;
}
goto bail;
}
+ platform_set_drvdata(pdev, info);
default_par = info->par;
default_par->regs = ioremap_nocache(pdev->resource[1].start,
pdev->resource[1].end - pdev->resource[1].start +1);
goto bail;
}
- platform_set_drvdata(pdev, info);
-
printk(KERN_INFO "fb%d: %s frame buffer device\n",
info->node, info->fix.id);
#if defined(CONFIG_FB_SAVAGE_I2C)
savagefb_create_i2c_busses(info);
savagefb_probe_i2c_connector(info, &par->edid);
- kfree(par->edid);
fb_edid_to_monspecs(par->edid, &info->monspecs);
+ kfree(par->edid);
fb_videomode_to_modelist(info->monspecs.modedb,
info->monspecs.modedb_len,
&info->modelist);
if (regno >= info->cmap.len || regno > 255) return 1;
switch (info->fix.visual) {
- case FB_VISUAL_PSEUDOCOLOR:
- rgbcol =(((u32)red & 0xff00) << 8) |
- (((u32)green & 0xff00) << 0) |
- (((u32)blue & 0xff00) >> 8);
- do_setpalentry(par, regno, rgbcol);
- break;
- /* Truecolor has no hardware color palettes. */
- case FB_VISUAL_TRUECOLOR:
+ case FB_VISUAL_PSEUDOCOLOR:
+ rgbcol =(((u32)red & 0xff00) << 8) |
+ (((u32)green & 0xff00) << 0) |
+ (((u32)blue & 0xff00) >> 8);
+ do_setpalentry(par, regno, rgbcol);
+ break;
+ /* Truecolor has no hardware color palettes. */
+ case FB_VISUAL_TRUECOLOR:
+ if (regno < 16) {
rgbcol = (CNVT_TOHW( red, info->var.red.length) <<
info->var.red.offset) |
- (CNVT_TOHW( green, info->var.green.length) <<
- info->var.green.offset) |
- (CNVT_TOHW( blue, info->var.blue.length) <<
- info->var.blue.offset) |
- (CNVT_TOHW( transp, info->var.transp.length) <<
- info->var.transp.offset);
- par->palette[regno] = rgbcol;
- break;
- default:
- DPRINTK("bad depth %u\n", info->var.bits_per_pixel);
- break;
+ (CNVT_TOHW( green, info->var.green.length) <<
+ info->var.green.offset) |
+ (CNVT_TOHW( blue, info->var.blue.length) <<
+ info->var.blue.offset) |
+ (CNVT_TOHW( transp, info->var.transp.length) <<
+ info->var.transp.offset);
+ par->palette[regno] = rgbcol;
+ }
+
+ break;
+ default:
+ DPRINTK("bad depth %u\n", info->var.bits_per_pixel);
+ break;
}
+
return 0;
}
if (!rc)
return;
- dprintk(DEBUG_9P, "tcall id %d rcall id %d\n", tc->id, rc->id);
v9ses = a;
if (rc->id == RCLUNK)
v9fs_put_idpool(fid, &v9ses->fidpool);
/*
* V9FS FID Management
*
- * Copyright (C) 2005 by Eric Van Hensbergen <ericvh@gmail.com>
+ * Copyright (C) 2005, 2006 by Eric Van Hensbergen <ericvh@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
*
*/
-static int v9fs_fid_insert(struct v9fs_fid *fid, struct dentry *dentry)
+int v9fs_fid_insert(struct v9fs_fid *fid, struct dentry *dentry)
{
struct list_head *fid_list = (struct list_head *)dentry->d_fsdata;
dprintk(DEBUG_9P, "fid %d (%p) dentry %s (%p)\n", fid->fid, fid,
}
fid->uid = current->uid;
- fid->pid = current->pid;
list_add(&fid->list, fid_list);
return 0;
}
*
*/
-struct v9fs_fid *v9fs_fid_create(struct dentry *dentry,
- struct v9fs_session_info *v9ses, int fid, int create)
+struct v9fs_fid *v9fs_fid_create(struct v9fs_session_info *v9ses, int fid)
{
struct v9fs_fid *new;
- dprintk(DEBUG_9P, "fid create dentry %p, fid %d, create %d\n",
- dentry, fid, create);
-
+ dprintk(DEBUG_9P, "fid create fid %d\n", fid);
new = kmalloc(sizeof(struct v9fs_fid), GFP_KERNEL);
if (new == NULL) {
dprintk(DEBUG_ERROR, "Out of Memory\n");
new->fid = fid;
new->v9ses = v9ses;
new->fidopen = 0;
- new->fidcreate = create;
new->fidclunked = 0;
new->iounit = 0;
new->rdir_pos = 0;
new->rdir_fcall = NULL;
+ INIT_LIST_HEAD(&new->list);
- if (v9fs_fid_insert(new, dentry) == 0)
- return new;
- else {
- dprintk(DEBUG_ERROR, "Problems inserting to dentry\n");
- kfree(new);
- return NULL;
- }
+ return new;
}
/**
kfree(fid);
}
-/**
- * v9fs_fid_walk_up - walks from the process current directory
- * up to the specified dentry.
- */
-static struct v9fs_fid *v9fs_fid_walk_up(struct dentry *dentry)
-{
- int fidnum, cfidnum, err;
- struct v9fs_fid *cfid;
- struct dentry *cde;
- struct v9fs_session_info *v9ses;
-
- v9ses = v9fs_inode2v9ses(current->fs->pwd->d_inode);
- cfid = v9fs_fid_lookup(current->fs->pwd);
- if (cfid == NULL) {
- dprintk(DEBUG_ERROR, "process cwd doesn't have a fid\n");
- return ERR_PTR(-ENOENT);
- }
-
- cfidnum = cfid->fid;
- cde = current->fs->pwd;
- /* TODO: take advantage of multiwalk */
-
- fidnum = v9fs_get_idpool(&v9ses->fidpool);
- if (fidnum < 0) {
- dprintk(DEBUG_ERROR, "could not get a new fid num\n");
- err = -ENOENT;
- goto clunk_fid;
- }
-
- while (cde != dentry) {
- if (cde == cde->d_parent) {
- dprintk(DEBUG_ERROR, "can't find dentry\n");
- err = -ENOENT;
- goto clunk_fid;
- }
-
- err = v9fs_t_walk(v9ses, cfidnum, fidnum, "..", NULL);
- if (err < 0) {
- dprintk(DEBUG_ERROR, "problem walking to parent\n");
- goto clunk_fid;
- }
-
- cfidnum = fidnum;
- cde = cde->d_parent;
- }
-
- return v9fs_fid_create(dentry, v9ses, fidnum, 0);
-
-clunk_fid:
- v9fs_t_clunk(v9ses, fidnum);
- return ERR_PTR(err);
-}
-
/**
* v9fs_fid_lookup - retrieve the right fid from a particular dentry
* @dentry: dentry to look for fid in
* @type: intent of lookup (operation or traversal)
*
- * search list of fids associated with a dentry for a fid with a matching
- * thread id or uid. If that fails, look up the dentry's parents to see if you
- * can find a matching fid.
+ * find a fid in the dentry
+ *
+ * TODO: only match fids that have the same uid as current user
*
*/
struct v9fs_fid *v9fs_fid_lookup(struct dentry *dentry)
{
struct list_head *fid_list = (struct list_head *)dentry->d_fsdata;
- struct v9fs_fid *current_fid = NULL;
- struct v9fs_fid *temp = NULL;
struct v9fs_fid *return_fid = NULL;
dprintk(DEBUG_9P, " dentry: %s (%p)\n", dentry->d_iname, dentry);
- if (fid_list) {
- list_for_each_entry_safe(current_fid, temp, fid_list, list) {
- if (!current_fid->fidcreate) {
- return_fid = current_fid;
- break;
- }
- }
-
- if (!return_fid)
- return_fid = current_fid;
- }
-
- /* we are at the root but didn't match */
- if ((!return_fid) && (dentry->d_parent == dentry)) {
- /* TODO: clone attach with new uid */
- return_fid = current_fid;
- }
+ if (fid_list)
+ return_fid = list_entry(fid_list->next, struct v9fs_fid, list);
if (!return_fid) {
- struct dentry *par = current->fs->pwd->d_parent;
- int count = 1;
- while (par != NULL) {
- if (par == dentry)
- break;
- count++;
- if (par == par->d_parent) {
- dprintk(DEBUG_ERROR,
- "got to root without finding dentry\n");
- break;
- }
- par = par->d_parent;
- }
-
-/* XXX - there may be some duplication we can get rid of */
- if (par == dentry) {
- return_fid = v9fs_fid_walk_up(dentry);
- if (IS_ERR(return_fid))
- return_fid = NULL;
- }
+ dprintk(DEBUG_ERROR, "Couldn't find a fid in dentry\n");
}
return return_fid;
}
-
-struct v9fs_fid *v9fs_fid_get_created(struct dentry *dentry)
-{
- struct list_head *fid_list;
- struct v9fs_fid *fid, *ftmp, *ret;
-
- dprintk(DEBUG_9P, " dentry: %s (%p)\n", dentry->d_iname, dentry);
- fid_list = (struct list_head *)dentry->d_fsdata;
- ret = NULL;
- if (fid_list) {
- list_for_each_entry_safe(fid, ftmp, fid_list, list) {
- if (fid->fidcreate && fid->pid == current->pid) {
- list_del(&fid->list);
- ret = fid;
- break;
- }
- }
- }
-
- dprintk(DEBUG_9P, "return %p\n", ret);
- return ret;
-}
u32 fid;
unsigned char fidopen; /* set when fid is opened */
- unsigned char fidcreate; /* set when fid was just created */
unsigned char fidclunked; /* set when fid has already been clunked */
struct v9fs_qid qid;
struct v9fs_fcall *rdir_fcall;
/* management stuff */
- pid_t pid; /* thread associated with this fid */
uid_t uid; /* user associated with this fid */
/* private data */
struct v9fs_fid *v9fs_fid_lookup(struct dentry *dentry);
struct v9fs_fid *v9fs_fid_get_created(struct dentry *);
void v9fs_fid_destroy(struct v9fs_fid *fid);
-struct v9fs_fid *v9fs_fid_create(struct dentry *,
- struct v9fs_session_info *v9ses, int fid, int create);
+struct v9fs_fid *v9fs_fid_create(struct v9fs_session_info *, int fid);
+int v9fs_fid_insert(struct v9fs_fid *fid, struct dentry *dentry);
if (!trans || trans->status != Connected || !ts)
return -EIO;
+ oldfs = get_fs();
set_fs(get_ds());
/* The cast to a user pointer is valid due to the set_fs() */
ret = vfs_write(ts->out_file, (void __user *)v, len, &ts->out_file->f_pos);
}
if (v9ses->afid != ~0) {
+ dprintk(DEBUG_ERROR, "afid not equal to ~0\n");
if (v9fs_t_clunk(v9ses, v9ses->afid))
dprintk(DEBUG_ERROR, "clunk failed\n");
}
int v9fs_file_open(struct inode *inode, struct file *file);
void v9fs_inode2stat(struct inode *inode, struct v9fs_stat *stat);
void v9fs_dentry_release(struct dentry *);
+int v9fs_uflags2omode(int uflags);
#include "fid.h"
/**
- * v9fs_dentry_validate - VFS dcache hook to validate cache
- * @dentry: dentry that is being validated
- * @nd: path data
+ * v9fs_dentry_delete - called when dentry refcount equals 0
+ * @dentry: dentry in question
*
- * dcache really shouldn't be used for 9P2000 as at all due to
- * potential attached semantics to directory traversal (walk).
- *
- * FUTURE: look into how to use dcache to allow multi-stage
- * walks in Plan 9 & potential for better dcache operation which
- * would remain valid for Plan 9 semantics. Older versions
- * had validation via stat for those interested. However, since
- * stat has the same approximate overhead as walk there really
- * is no difference. The only improvement would be from a
- * time-decay cache like NFS has and that undermines the
- * synchronous nature of 9P2000.
+ * By returning 1 here we should remove cacheing of unused
+ * dentry components.
*
*/
-static int v9fs_dentry_validate(struct dentry *dentry, struct nameidata *nd)
+int v9fs_dentry_delete(struct dentry *dentry)
{
- struct dentry *dc = current->fs->pwd;
-
- dprintk(DEBUG_VFS, "dentry: %s (%p)\n", dentry->d_iname, dentry);
- if (v9fs_fid_lookup(dentry)) {
- dprintk(DEBUG_VFS, "VALID\n");
- return 1;
- }
-
- while (dc != NULL) {
- if (dc == dentry) {
- dprintk(DEBUG_VFS, "VALID\n");
- return 1;
- }
- if (dc == dc->d_parent)
- break;
-
- dc = dc->d_parent;
- }
-
- dprintk(DEBUG_VFS, "INVALID\n");
- return 0;
+ dprintk(DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
+ return 1;
}
/**
}
struct dentry_operations v9fs_dentry_operations = {
- .d_revalidate = v9fs_dentry_validate,
+ .d_delete = v9fs_dentry_delete,
.d_release = v9fs_dentry_release,
};
filp->private_data = NULL;
}
- d_drop(filp->f_dentry);
return 0;
}
int v9fs_file_open(struct inode *inode, struct file *file)
{
struct v9fs_session_info *v9ses = v9fs_inode2v9ses(inode);
- struct v9fs_fid *v9fid, *fid;
+ struct v9fs_fid *vfid;
struct v9fs_fcall *fcall = NULL;
- int open_mode = 0;
- unsigned int iounit = 0;
- int newfid = -1;
- long result = -1;
+ int omode;
+ int fid = V9FS_NOFID;
+ int err;
dprintk(DEBUG_VFS, "inode: %p file: %p \n", inode, file);
- v9fid = v9fs_fid_get_created(file->f_dentry);
- if (!v9fid)
- v9fid = v9fs_fid_lookup(file->f_dentry);
-
- if (!v9fid) {
+ vfid = v9fs_fid_lookup(file->f_dentry);
+ if (!vfid) {
dprintk(DEBUG_ERROR, "Couldn't resolve fid from dentry\n");
return -EBADF;
}
- if (!v9fid->fidcreate) {
- fid = kmalloc(sizeof(struct v9fs_fid), GFP_KERNEL);
- if (fid == NULL) {
- dprintk(DEBUG_ERROR, "Out of Memory\n");
- return -ENOMEM;
- }
-
- fid->fidopen = 0;
- fid->fidcreate = 0;
- fid->fidclunked = 0;
- fid->iounit = 0;
- fid->v9ses = v9ses;
-
- newfid = v9fs_get_idpool(&v9ses->fidpool);
- if (newfid < 0) {
+ fid = v9fs_get_idpool(&v9ses->fidpool);
+ if (fid < 0) {
eprintk(KERN_WARNING, "newfid fails!\n");
return -ENOSPC;
}
- result =
- v9fs_t_walk(v9ses, v9fid->fid, newfid, NULL, NULL);
-
- if (result < 0) {
- v9fs_put_idpool(newfid, &v9ses->fidpool);
+ err = v9fs_t_walk(v9ses, vfid->fid, fid, NULL, NULL);
+ if (err < 0) {
dprintk(DEBUG_ERROR, "rewalk didn't work\n");
- return -EBADF;
+ goto put_fid;
+ }
+
+ vfid = kmalloc(sizeof(struct v9fs_fid), GFP_KERNEL);
+ if (vfid == NULL) {
+ dprintk(DEBUG_ERROR, "out of memory\n");
+ goto clunk_fid;
}
- fid->fid = newfid;
- v9fid = fid;
/* TODO: do special things for O_EXCL, O_NOFOLLOW, O_SYNC */
/* translate open mode appropriately */
- open_mode = file->f_flags & 0x3;
+ omode = v9fs_uflags2omode(file->f_flags);
+ err = v9fs_t_open(v9ses, fid, omode, &fcall);
+ if (err < 0) {
+ PRINT_FCALL_ERROR("open failed", fcall);
+ goto destroy_vfid;
+ }
- if (file->f_flags & O_EXCL)
- open_mode |= V9FS_OEXCL;
+ file->private_data = vfid;
+ vfid->fid = fid;
+ vfid->fidopen = 1;
+ vfid->fidclunked = 0;
+ vfid->iounit = fcall->params.ropen.iounit;
+ vfid->rdir_pos = 0;
+ vfid->rdir_fcall = NULL;
+ vfid->filp = file;
+ kfree(fcall);
- if (v9ses->extended) {
- if (file->f_flags & O_TRUNC)
- open_mode |= V9FS_OTRUNC;
+ return 0;
- if (file->f_flags & O_APPEND)
- open_mode |= V9FS_OAPPEND;
- }
+destroy_vfid:
+ v9fs_fid_destroy(vfid);
- result = v9fs_t_open(v9ses, newfid, open_mode, &fcall);
- if (result < 0) {
- PRINT_FCALL_ERROR("open failed", fcall);
- kfree(fcall);
- return result;
- }
+clunk_fid:
+ v9fs_t_clunk(v9ses, fid);
- iounit = fcall->params.ropen.iounit;
+put_fid:
+ v9fs_put_idpool(fid, &v9ses->fidpool);
kfree(fcall);
- } else {
- /* create case */
- newfid = v9fid->fid;
- iounit = v9fid->iounit;
- v9fid->fidcreate = 0;
- }
-
- file->private_data = v9fid;
-
- v9fid->rdir_pos = 0;
- v9fid->rdir_fcall = NULL;
- v9fid->fidopen = 1;
- v9fid->filp = file;
- v9fid->iounit = iounit;
- return 0;
+ return err;
}
/**
total += result;
} while (count);
- if(inode->i_mapping->nrpages)
invalidate_inode_pages2(inode->i_mapping);
-
return total;
}
return res;
}
+int v9fs_uflags2omode(int uflags)
+{
+ int ret;
+
+ ret = 0;
+ switch (uflags&3) {
+ default:
+ case O_RDONLY:
+ ret = V9FS_OREAD;
+ break;
+
+ case O_WRONLY:
+ ret = V9FS_OWRITE;
+ break;
+
+ case O_RDWR:
+ ret = V9FS_ORDWR;
+ break;
+ }
+
+ if (uflags & O_EXCL)
+ ret |= V9FS_OEXCL;
+
+ if (uflags & O_TRUNC)
+ ret |= V9FS_OTRUNC;
+
+ if (uflags & O_APPEND)
+ ret |= V9FS_OAPPEND;
+
+ return ret;
+}
+
/**
* v9fs_blank_wstat - helper function to setup a 9P stat structure
* @v9ses: 9P session info (for determining extended mode)
struct inode *v9fs_get_inode(struct super_block *sb, int mode)
{
- struct inode *inode = NULL;
+ struct inode *inode;
struct v9fs_session_info *v9ses = sb->s_fs_info;
dprintk(DEBUG_VFS, "super block: %p mode: %o\n", sb, mode);
return inode;
}
-/**
- * v9fs_create - helper function to create files and directories
- * @dir: directory inode file is being created in
- * @file_dentry: dentry file is being created in
- * @perm: permissions file is being created with
- * @open_mode: resulting open mode for file
- *
- */
-
static int
-v9fs_create(struct inode *dir,
- struct dentry *file_dentry,
- unsigned int perm, unsigned int open_mode)
+v9fs_create(struct v9fs_session_info *v9ses, u32 pfid, char *name,
+ u32 perm, u8 mode, u32 *fidp, struct v9fs_qid *qid, u32 *iounit)
{
- struct v9fs_session_info *v9ses = v9fs_inode2v9ses(dir);
- struct super_block *sb = dir->i_sb;
- struct v9fs_fid *dirfid =
- v9fs_fid_lookup(file_dentry->d_parent);
- struct v9fs_fid *fid = NULL;
- struct inode *file_inode = NULL;
- struct v9fs_fcall *fcall = NULL;
- struct v9fs_qid qid;
- int dirfidnum = -1;
- long newfid = -1;
- int result = 0;
- unsigned int iounit = 0;
- int wfidno = -1;
+ u32 fid;
int err;
+ struct v9fs_fcall *fcall;
- perm = unixmode2p9mode(v9ses, perm);
-
- dprintk(DEBUG_VFS, "dir: %p dentry: %p perm: %o mode: %o\n", dir,
- file_dentry, perm, open_mode);
-
- if (!dirfid)
- return -EBADF;
-
- dirfidnum = dirfid->fid;
- if (dirfidnum < 0) {
- dprintk(DEBUG_ERROR, "No fid for the directory #%lu\n",
- dir->i_ino);
- return -EBADF;
- }
-
- if (file_dentry->d_inode) {
- dprintk(DEBUG_ERROR,
- "Odd. There is an inode for dir %lu, name :%s:\n",
- dir->i_ino, file_dentry->d_name.name);
- return -EEXIST;
- }
-
- newfid = v9fs_get_idpool(&v9ses->fidpool);
- if (newfid < 0) {
+ fid = v9fs_get_idpool(&v9ses->fidpool);
+ if (fid < 0) {
eprintk(KERN_WARNING, "no free fids available\n");
return -ENOSPC;
}
- result = v9fs_t_walk(v9ses, dirfidnum, newfid, NULL, &fcall);
- if (result < 0) {
+ err = v9fs_t_walk(v9ses, pfid, fid, NULL, &fcall);
+ if (err < 0) {
PRINT_FCALL_ERROR("clone error", fcall);
- v9fs_put_idpool(newfid, &v9ses->fidpool);
- newfid = -1;
- goto CleanUpFid;
+ goto error;
}
-
kfree(fcall);
- fcall = NULL;
- result = v9fs_t_create(v9ses, newfid, (char *)file_dentry->d_name.name,
- perm, open_mode, &fcall);
- if (result < 0) {
+ err = v9fs_t_create(v9ses, fid, name, perm, mode, &fcall);
+ if (err < 0) {
PRINT_FCALL_ERROR("create fails", fcall);
- goto CleanUpFid;
+ goto error;
}
- iounit = fcall->params.rcreate.iounit;
- qid = fcall->params.rcreate.qid;
+ if (iounit)
+ *iounit = fcall->params.rcreate.iounit;
+
+ if (qid)
+ *qid = fcall->params.rcreate.qid;
+
+ if (fidp)
+ *fidp = fid;
+
kfree(fcall);
- fcall = NULL;
+ return 0;
- if (!(perm&V9FS_DMDIR)) {
- fid = v9fs_fid_create(file_dentry, v9ses, newfid, 1);
- dprintk(DEBUG_VFS, "fid %p %d\n", fid, fid->fidcreate);
- if (!fid) {
- result = -ENOMEM;
- goto CleanUpFid;
- }
+error:
+ if (fid >= 0)
+ v9fs_put_idpool(fid, &v9ses->fidpool);
- fid->qid = qid;
- fid->iounit = iounit;
- } else {
- err = v9fs_t_clunk(v9ses, newfid);
- newfid = -1;
- if (err < 0)
- dprintk(DEBUG_ERROR, "clunk for mkdir failed: %d\n", err);
- }
+ kfree(fcall);
+ return err;
+}
+
+static struct v9fs_fid*
+v9fs_clone_walk(struct v9fs_session_info *v9ses, u32 fid, struct dentry *dentry)
+{
+ int err;
+ u32 nfid;
+ struct v9fs_fid *ret;
+ struct v9fs_fcall *fcall;
- /* walk to the newly created file and put the fid in the dentry */
- wfidno = v9fs_get_idpool(&v9ses->fidpool);
- if (wfidno < 0) {
+ nfid = v9fs_get_idpool(&v9ses->fidpool);
+ if (nfid < 0) {
eprintk(KERN_WARNING, "no free fids available\n");
- return -ENOSPC;
+ return ERR_PTR(-ENOSPC);
}
- result = v9fs_t_walk(v9ses, dirfidnum, wfidno,
- (char *) file_dentry->d_name.name, &fcall);
- if (result < 0) {
- PRINT_FCALL_ERROR("clone error", fcall);
- v9fs_put_idpool(wfidno, &v9ses->fidpool);
- wfidno = -1;
- goto CleanUpFid;
+ err = v9fs_t_walk(v9ses, fid, nfid, (char *) dentry->d_name.name,
+ &fcall);
+
+ if (err < 0) {
+ PRINT_FCALL_ERROR("walk error", fcall);
+ v9fs_put_idpool(nfid, &v9ses->fidpool);
+ goto error;
}
+
kfree(fcall);
fcall = NULL;
+ ret = v9fs_fid_create(v9ses, nfid);
+ if (!ret) {
+ err = -ENOMEM;
+ goto clunk_fid;
+ }
- if (!v9fs_fid_create(file_dentry, v9ses, wfidno, 0)) {
- v9fs_put_idpool(wfidno, &v9ses->fidpool);
-
- goto CleanUpFid;
+ err = v9fs_fid_insert(ret, dentry);
+ if (err < 0) {
+ v9fs_fid_destroy(ret);
+ goto clunk_fid;
}
- if ((perm & V9FS_DMSYMLINK) || (perm & V9FS_DMLINK) ||
- (perm & V9FS_DMNAMEDPIPE) || (perm & V9FS_DMSOCKET) ||
- (perm & V9FS_DMDEVICE))
- return 0;
+ return ret;
- result = v9fs_t_stat(v9ses, wfidno, &fcall);
- if (result < 0) {
- PRINT_FCALL_ERROR("stat error", fcall);
- goto CleanUpFid;
- }
+clunk_fid:
+ v9fs_t_clunk(v9ses, nfid);
+error:
+ kfree(fcall);
+ return ERR_PTR(err);
+}
- file_inode = v9fs_get_inode(sb,
- p9mode2unixmode(v9ses, fcall->params.rstat.stat.mode));
+struct inode *
+v9fs_inode_from_fid(struct v9fs_session_info *v9ses, u32 fid,
+ struct super_block *sb)
+{
+ int err, umode;
+ struct inode *ret;
+ struct v9fs_fcall *fcall;
- if ((!file_inode) || IS_ERR(file_inode)) {
- dprintk(DEBUG_ERROR, "create inode failed\n");
- result = -EBADF;
- goto CleanUpFid;
+ ret = NULL;
+ err = v9fs_t_stat(v9ses, fid, &fcall);
+ if (err) {
+ PRINT_FCALL_ERROR("stat error", fcall);
+ goto error;
}
- v9fs_stat2inode(&fcall->params.rstat.stat, file_inode, sb);
- kfree(fcall);
- fcall = NULL;
- file_dentry->d_op = &v9fs_dentry_operations;
- d_instantiate(file_dentry, file_inode);
+ umode = p9mode2unixmode(v9ses, fcall->params.rstat.stat.mode);
+ ret = v9fs_get_inode(sb, umode);
+ if (IS_ERR(ret)) {
+ err = PTR_ERR(ret);
+ ret = NULL;
+ goto error;
+ }
- return 0;
+ v9fs_stat2inode(&fcall->params.rstat.stat, ret, sb);
+ kfree(fcall);
+ return ret;
- CleanUpFid:
+error:
kfree(fcall);
- fcall = NULL;
+ if (ret)
+ iput(ret);
- if (newfid >= 0) {
- err = v9fs_t_clunk(v9ses, newfid);
- if (err < 0)
- dprintk(DEBUG_ERROR, "clunk failed: %d\n", err);
- }
- if (wfidno >= 0) {
- err = v9fs_t_clunk(v9ses, wfidno);
- if (err < 0)
- dprintk(DEBUG_ERROR, "clunk failed: %d\n", err);
- }
- return result;
+ return ERR_PTR(err);
}
/**
return result;
}
+static int
+v9fs_open_created(struct inode *inode, struct file *file)
+{
+ return 0;
+}
+
/**
* v9fs_vfs_create - VFS hook to create files
* @inode: directory inode that is being deleted
* @dentry: dentry that is being deleted
- * @perm: create permissions
+ * @mode: create permissions
* @nd: path information
*
*/
static int
-v9fs_vfs_create(struct inode *inode, struct dentry *dentry, int perm,
+v9fs_vfs_create(struct inode *dir, struct dentry *dentry, int mode,
struct nameidata *nd)
{
- return v9fs_create(inode, dentry, perm, O_RDWR);
+ int err;
+ u32 fid, perm, iounit;
+ int flags;
+ struct v9fs_session_info *v9ses;
+ struct v9fs_fid *dfid, *vfid, *ffid;
+ struct inode *inode;
+ struct v9fs_qid qid;
+ struct file *filp;
+
+ inode = NULL;
+ vfid = NULL;
+ v9ses = v9fs_inode2v9ses(dir);
+ dfid = v9fs_fid_lookup(dentry->d_parent);
+ perm = unixmode2p9mode(v9ses, mode);
+
+ if (nd && nd->flags & LOOKUP_OPEN)
+ flags = nd->intent.open.flags - 1;
+ else
+ flags = O_RDWR;
+
+ err = v9fs_create(v9ses, dfid->fid, (char *) dentry->d_name.name,
+ perm, v9fs_uflags2omode(flags), &fid, &qid, &iounit);
+
+ if (err)
+ goto error;
+
+ vfid = v9fs_clone_walk(v9ses, dfid->fid, dentry);
+ if (IS_ERR(vfid)) {
+ err = PTR_ERR(vfid);
+ vfid = NULL;
+ goto error;
+ }
+
+ inode = v9fs_inode_from_fid(v9ses, vfid->fid, dir->i_sb);
+ if (IS_ERR(inode)) {
+ err = PTR_ERR(inode);
+ inode = NULL;
+ goto error;
+ }
+
+ dentry->d_op = &v9fs_dentry_operations;
+ d_instantiate(dentry, inode);
+
+ if (nd && nd->flags & LOOKUP_OPEN) {
+ ffid = v9fs_fid_create(v9ses, fid);
+ if (!ffid)
+ return -ENOMEM;
+
+ filp = lookup_instantiate_filp(nd, dentry, v9fs_open_created);
+ if (IS_ERR(filp)) {
+ v9fs_fid_destroy(ffid);
+ return PTR_ERR(filp);
+ }
+
+ ffid->rdir_pos = 0;
+ ffid->rdir_fcall = NULL;
+ ffid->fidopen = 1;
+ ffid->iounit = iounit;
+ ffid->filp = filp;
+ filp->private_data = ffid;
+ }
+
+ return 0;
+
+error:
+ if (vfid)
+ v9fs_fid_destroy(vfid);
+
+ if (inode)
+ iput(inode);
+
+ return err;
}
/**
*
*/
-static int v9fs_vfs_mkdir(struct inode *inode, struct dentry *dentry, int mode)
+static int v9fs_vfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
{
- return v9fs_create(inode, dentry, mode | S_IFDIR, O_RDONLY);
+ int err;
+ u32 fid, perm;
+ struct v9fs_session_info *v9ses;
+ struct v9fs_fid *dfid, *vfid;
+ struct inode *inode;
+
+ inode = NULL;
+ vfid = NULL;
+ v9ses = v9fs_inode2v9ses(dir);
+ dfid = v9fs_fid_lookup(dentry->d_parent);
+ perm = unixmode2p9mode(v9ses, mode | S_IFDIR);
+
+ err = v9fs_create(v9ses, dfid->fid, (char *) dentry->d_name.name,
+ perm, V9FS_OREAD, &fid, NULL, NULL);
+
+ if (err) {
+ dprintk(DEBUG_ERROR, "create error %d\n", err);
+ goto error;
+ }
+
+ err = v9fs_t_clunk(v9ses, fid);
+ if (err) {
+ dprintk(DEBUG_ERROR, "clunk error %d\n", err);
+ goto error;
+ }
+
+ vfid = v9fs_clone_walk(v9ses, dfid->fid, dentry);
+ if (IS_ERR(vfid)) {
+ err = PTR_ERR(vfid);
+ vfid = NULL;
+ goto error;
+ }
+
+ inode = v9fs_inode_from_fid(v9ses, vfid->fid, dir->i_sb);
+ if (IS_ERR(inode)) {
+ err = PTR_ERR(inode);
+ inode = NULL;
+ goto error;
+ }
+
+ dentry->d_op = &v9fs_dentry_operations;
+ d_instantiate(dentry, inode);
+ return 0;
+
+error:
+ if (vfid)
+ v9fs_fid_destroy(vfid);
+
+ return err;
}
/**
int result = 0;
dprintk(DEBUG_VFS, "dir: %p dentry: (%s) %p nameidata: %p\n",
- dir, dentry->d_iname, dentry, nameidata);
+ dir, dentry->d_name.name, dentry, nameidata);
sb = dir->i_sb;
v9ses = v9fs_inode2v9ses(dir);
return ERR_PTR(-ENOSPC);
}
- result =
- v9fs_t_walk(v9ses, dirfidnum, newfid, (char *)dentry->d_name.name,
- NULL);
+ result = v9fs_t_walk(v9ses, dirfidnum, newfid,
+ (char *)dentry->d_name.name, NULL);
if (result < 0) {
v9fs_put_idpool(newfid, &v9ses->fidpool);
if (result == -ENOENT) {
inode->i_ino = v9fs_qid2ino(&fcall->params.rstat.stat.qid);
- fid = v9fs_fid_create(dentry, v9ses, newfid, 0);
+ fid = v9fs_fid_create(v9ses, newfid);
if (fid == NULL) {
dprintk(DEBUG_ERROR, "couldn't insert\n");
result = -ENOMEM;
goto FreeFcall;
}
+ result = v9fs_fid_insert(fid, dentry);
+ if (result < 0)
+ goto FreeFcall;
+
fid->qid = fcall->params.rstat.stat.qid;
dentry->d_op = &v9fs_dentry_operations;
}
/* copy extension buffer into buffer */
- if (fcall->params.rstat.stat.extension.len+1 < buflen)
- buflen = fcall->params.rstat.stat.extension.len + 1;
+ if (fcall->params.rstat.stat.extension.len < buflen)
+ buflen = fcall->params.rstat.stat.extension.len;
memcpy(buffer, fcall->params.rstat.stat.extension.str, buflen - 1);
buffer[buflen-1] = 0;
if (!link)
link = ERR_PTR(-ENOMEM);
else {
- len = v9fs_readlink(dentry, link, PATH_MAX);
+ len = v9fs_readlink(dentry, link, strlen(link));
if (len < 0) {
__putname(link);
static int v9fs_vfs_mkspecial(struct inode *dir, struct dentry *dentry,
int mode, const char *extension)
{
- int err, retval;
+ int err;
+ u32 fid, perm;
struct v9fs_session_info *v9ses;
+ struct v9fs_fid *dfid, *vfid;
+ struct inode *inode;
struct v9fs_fcall *fcall;
- struct v9fs_fid *fid;
struct v9fs_wstat wstat;
- v9ses = v9fs_inode2v9ses(dir);
- retval = -EPERM;
fcall = NULL;
+ inode = NULL;
+ vfid = NULL;
+ v9ses = v9fs_inode2v9ses(dir);
+ dfid = v9fs_fid_lookup(dentry->d_parent);
+ perm = unixmode2p9mode(v9ses, mode);
if (!v9ses->extended) {
dprintk(DEBUG_ERROR, "not extended\n");
- goto free_mem;
+ return -EPERM;
}
- /* issue a create */
- retval = v9fs_create(dir, dentry, mode, 0);
- if (retval != 0)
- goto free_mem;
+ err = v9fs_create(v9ses, dfid->fid, (char *) dentry->d_name.name,
+ perm, V9FS_OREAD, &fid, NULL, NULL);
- fid = v9fs_fid_get_created(dentry);
- if (!fid) {
- dprintk(DEBUG_ERROR, "couldn't resolve fid from dentry\n");
- goto free_mem;
+ if (err)
+ goto error;
+
+ err = v9fs_t_clunk(v9ses, fid);
+ if (err)
+ goto error;
+
+ vfid = v9fs_clone_walk(v9ses, dfid->fid, dentry);
+ if (IS_ERR(vfid)) {
+ err = PTR_ERR(vfid);
+ vfid = NULL;
+ goto error;
+ }
+
+ inode = v9fs_inode_from_fid(v9ses, vfid->fid, dir->i_sb);
+ if (IS_ERR(inode)) {
+ err = PTR_ERR(inode);
+ inode = NULL;
+ goto error;
}
/* issue a Twstat */
v9fs_blank_wstat(&wstat);
wstat.muid = v9ses->name;
wstat.extension = (char *) extension;
- retval = v9fs_t_wstat(v9ses, fid->fid, &wstat, &fcall);
- if (retval < 0) {
- PRINT_FCALL_ERROR("wstat error", fcall);
- goto free_mem;
- }
-
- err = v9fs_t_clunk(v9ses, fid->fid);
+ err = v9fs_t_wstat(v9ses, vfid->fid, &wstat, &fcall);
if (err < 0) {
- dprintk(DEBUG_ERROR, "clunk failed: %d\n", err);
- goto free_mem;
+ PRINT_FCALL_ERROR("wstat error", fcall);
+ goto error;
}
- d_drop(dentry); /* FID - will this also clunk? */
+ kfree(fcall);
+ dentry->d_op = &v9fs_dentry_operations;
+ d_instantiate(dentry, inode);
+ return 0;
-free_mem:
+error:
kfree(fcall);
- return retval;
+ if (vfid)
+ v9fs_fid_destroy(vfid);
+
+ if (inode)
+ iput(inode);
+
+ return err;
+
}
/**
inode->i_gid = gid;
root = d_alloc_root(inode);
-
if (!root) {
retval = -ENOMEM;
goto put_back_sb;
if (stat_result < 0) {
dprintk(DEBUG_ERROR, "stat error\n");
v9fs_t_clunk(v9ses, newfid);
- v9fs_put_idpool(newfid, &v9ses->fidpool);
} else {
/* Setup the Root Inode */
- root_fid = v9fs_fid_create(root, v9ses, newfid, 0);
+ root_fid = v9fs_fid_create(v9ses, newfid);
if (root_fid == NULL) {
retval = -ENOMEM;
goto put_back_sb;
}
+ retval = v9fs_fid_insert(root_fid, root);
+ if (retval < 0) {
+ kfree(fcall);
+ goto put_back_sb;
+ }
+
root_fid->qid = fcall->params.rstat.stat.qid;
root->d_inode->i_ino =
v9fs_qid2ino(&fcall->params.rstat.stat.qid);
{
struct address_space *mapping = page->mapping;
struct buffer_head *bh, *head;
+ int rc;
if (!mapping)
return -EAGAIN;
head = page_buffers(page);
- if (migrate_page_remove_references(newpage, page, 3))
- return -EAGAIN;
+ rc = migrate_page_remove_references(newpage, page, 3);
+ if (rc)
+ return rc;
bh = head;
do {
int * /* type of buf returned */ , const int long_op);
extern int checkSMBhdr(struct smb_hdr *smb, __u16 mid);
extern int checkSMB(struct smb_hdr *smb, __u16 mid, int length);
-extern int is_valid_oplock_break(struct smb_hdr *smb);
+extern int is_valid_oplock_break(struct smb_hdr *smb, struct TCP_Server_Info *);
extern int is_size_safe_to_change(struct cifsInodeInfo *);
extern struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *);
extern unsigned int smbCalcSize(struct smb_hdr *ptr);
smallbuf = NULL;
}
wake_up_process(task_to_wake);
- } else if ((is_valid_oplock_break(smb_buffer) == FALSE)
+ } else if ((is_valid_oplock_break(smb_buffer, server) == FALSE)
&& (isMultiRsp == FALSE)) {
cERROR(1, ("No task to wake, unknown frame rcvd!"));
cifs_dump_mem("Received Data is: ",(char *)smb_buffer,
return 0;
}
int
-is_valid_oplock_break(struct smb_hdr *buf)
+is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv)
{
struct smb_com_lock_req * pSMB = (struct smb_com_lock_req *)buf;
struct list_head *tmp;
read_lock(&GlobalSMBSeslock);
list_for_each(tmp, &GlobalTreeConnectionList) {
tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList);
- if (tcon->tid == buf->Tid) {
+ if ((tcon->tid == buf->Tid) && (srv == tcon->ses->server)) {
cifs_stats_inc(&tcon->num_oplock_brks);
list_for_each(tmp1,&tcon->openFileList){
netfile = list_entry(tmp1,struct cifsFileInfo,
ifr = ifc.ifc_req;
ifr32 = compat_ptr(ifc32.ifcbuf);
for (i = 0, j = 0;
- i + sizeof (struct ifreq32) < ifc32.ifc_len && j < ifc.ifc_len;
+ i + sizeof (struct ifreq32) <= ifc32.ifc_len && j < ifc.ifc_len;
i += sizeof (struct ifreq32), j += sizeof (struct ifreq)) {
if (copy_in_user(ifr32, ifr, sizeof (struct ifreq32)))
return -EFAULT;
/* These two macros may change in future, to provide better st_ino
semantics. */
-#define CRAMINO(x) ((x)->offset?(x)->offset<<2:1)
+#define CRAMINO(x) (((x)->offset && (x)->size)?(x)->offset<<2:1)
#define OFFSET(x) ((x)->i_ino)
static int cramfs_iget5_set(struct inode *inode, void *opaque)
{
+ static struct timespec zerotime;
struct cramfs_inode *cramfs_inode = opaque;
+ inode->i_mode = cramfs_inode->mode;
+ inode->i_uid = cramfs_inode->uid;
+ inode->i_size = cramfs_inode->size;
+ inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
+ inode->i_blksize = PAGE_CACHE_SIZE;
+ inode->i_gid = cramfs_inode->gid;
+ /* Struct copy intentional */
+ inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
inode->i_ino = CRAMINO(cramfs_inode);
+ /* inode->i_nlink is left 1 - arguably wrong for directories,
+ but it's the best we can do without reading the directory
+ contents. 1 yields the right result in GNU find, even
+ without -noleaf option. */
+ if (S_ISREG(inode->i_mode)) {
+ inode->i_fop = &generic_ro_fops;
+ inode->i_data.a_ops = &cramfs_aops;
+ } else if (S_ISDIR(inode->i_mode)) {
+ inode->i_op = &cramfs_dir_inode_operations;
+ inode->i_fop = &cramfs_directory_operations;
+ } else if (S_ISLNK(inode->i_mode)) {
+ inode->i_op = &page_symlink_inode_operations;
+ inode->i_data.a_ops = &cramfs_aops;
+ } else {
+ inode->i_size = 0;
+ inode->i_blocks = 0;
+ init_special_inode(inode, inode->i_mode,
+ old_decode_dev(cramfs_inode->size));
+ }
return 0;
}
struct inode *inode = iget5_locked(sb, CRAMINO(cramfs_inode),
cramfs_iget5_test, cramfs_iget5_set,
cramfs_inode);
- static struct timespec zerotime;
-
if (inode && (inode->i_state & I_NEW)) {
- inode->i_mode = cramfs_inode->mode;
- inode->i_uid = cramfs_inode->uid;
- inode->i_size = cramfs_inode->size;
- inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
- inode->i_blksize = PAGE_CACHE_SIZE;
- inode->i_gid = cramfs_inode->gid;
- /* Struct copy intentional */
- inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
- inode->i_ino = CRAMINO(cramfs_inode);
- /* inode->i_nlink is left 1 - arguably wrong for directories,
- but it's the best we can do without reading the directory
- contents. 1 yields the right result in GNU find, even
- without -noleaf option. */
- if (S_ISREG(inode->i_mode)) {
- inode->i_fop = &generic_ro_fops;
- inode->i_data.a_ops = &cramfs_aops;
- } else if (S_ISDIR(inode->i_mode)) {
- inode->i_op = &cramfs_dir_inode_operations;
- inode->i_fop = &cramfs_directory_operations;
- } else if (S_ISLNK(inode->i_mode)) {
- inode->i_op = &page_symlink_inode_operations;
- inode->i_data.a_ops = &cramfs_aops;
- } else {
- inode->i_size = 0;
- inode->i_blocks = 0;
- init_special_inode(inode, inode->i_mode,
- old_decode_dev(cramfs_inode->size));
- }
unlock_new_inode(inode);
}
return inode;
SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL, NULL);
filp_cachep = kmem_cache_create("filp", sizeof(struct file), 0,
- SLAB_HWCACHE_ALIGN|SLAB_PANIC, filp_ctor, filp_dtor);
+ SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL, NULL);
dcache_init(mempages);
inode_init(mempages);
* For writes, i_mutex is not held on entry; it is never taken.
*
* DIO_LOCKING (simple locking for regular files)
- * For writes we are called under i_mutex and return with i_mutex held, even though
- * it is internally dropped.
+ * For writes we are called under i_mutex and return with i_mutex held, even
+ * though it is internally dropped.
* For reads, i_mutex is not held on entry, but it is taken and dropped before
* returning.
*
* DIO_OWN_LOCKING (filesystem provides synchronisation and handling of
* uninitialised data, allowing parallel direct readers and writers)
* For writes we are called without i_mutex, return without it, never touch it.
- * For reads, i_mutex is held on entry and will be released before returning.
+ * For reads we are called under i_mutex and return with i_mutex held, even
+ * though it may be internally dropped.
*
* Additional i_alloc_sem locking requirements described inline below.
*/
ssize_t retval = -EINVAL;
loff_t end = offset;
struct dio *dio;
- int reader_with_isem = (rw == READ && dio_lock_type == DIO_OWN_LOCKING);
+ int release_i_mutex = 0;
+ int acquire_i_mutex = 0;
if (rw & WRITE)
current->flags |= PF_SYNCWRITE;
* writers need to grab i_alloc_sem only (i_mutex is already held)
* For regular files using DIO_OWN_LOCKING,
* neither readers nor writers take any locks here
- * (i_mutex is already held and release for writers here)
*/
dio->lock_type = dio_lock_type;
if (dio_lock_type != DIO_NO_LOCKING) {
mapping = iocb->ki_filp->f_mapping;
if (dio_lock_type != DIO_OWN_LOCKING) {
mutex_lock(&inode->i_mutex);
- reader_with_isem = 1;
+ release_i_mutex = 1;
}
retval = filemap_write_and_wait_range(mapping, offset,
if (dio_lock_type == DIO_OWN_LOCKING) {
mutex_unlock(&inode->i_mutex);
- reader_with_isem = 0;
+ acquire_i_mutex = 1;
}
}
nr_segs, blkbits, get_blocks, end_io, dio);
if (rw == READ && dio_lock_type == DIO_LOCKING)
- reader_with_isem = 0;
+ release_i_mutex = 0;
out:
- if (reader_with_isem)
+ if (release_i_mutex)
mutex_unlock(&inode->i_mutex);
+ else if (acquire_i_mutex)
+ mutex_lock(&inode->i_mutex);
if (rw & WRITE)
current->flags &= ~PF_SYNCWRITE;
return retval;
current->flags &= ~PF_RANDOMIZE;
flush_thread();
+ /* Set the new mm task size. We have to do that late because it may
+ * depend on TIF_32BIT which is only updated in flush_thread() on
+ * some architectures like powerpc
+ */
+ current->mm->task_size = TASK_SIZE;
+
if (bprm->e_uid != current->euid || bprm->e_gid != current->egid ||
file_permission(bprm->file, MAY_READ) ||
(bprm->interp_flags & BINPRM_FLAGS_ENFORCE_NONDUMP)) {
unsigned long npages = dir_pages(inode);
unsigned chunk_mask = ~(ext2_chunk_size(inode)-1);
unsigned char *types = NULL;
- int need_revalidate = (filp->f_version != inode->i_version);
- int ret;
+ int need_revalidate = filp->f_version != inode->i_version;
if (pos > inode->i_size - EXT2_DIR_REC_LEN(1))
- goto success;
+ return 0;
if (EXT2_HAS_INCOMPAT_FEATURE(sb, EXT2_FEATURE_INCOMPAT_FILETYPE))
types = ext2_filetype_table;
"bad page in #%lu",
inode->i_ino);
filp->f_pos += PAGE_CACHE_SIZE - offset;
- ret = -EIO;
- goto done;
+ return -EIO;
}
kaddr = page_address(page);
- if (need_revalidate) {
- offset = ext2_validate_entry(kaddr, offset, chunk_mask);
+ if (unlikely(need_revalidate)) {
+ if (offset) {
+ offset = ext2_validate_entry(kaddr, offset, chunk_mask);
+ filp->f_pos = (n<<PAGE_CACHE_SHIFT) + offset;
+ }
+ filp->f_version = inode->i_version;
need_revalidate = 0;
}
de = (ext2_dirent *)(kaddr+offset);
if (de->rec_len == 0) {
ext2_error(sb, __FUNCTION__,
"zero-length directory entry");
- ret = -EIO;
ext2_put_page(page);
- goto done;
+ return -EIO;
}
if (de->inode) {
int over;
le32_to_cpu(de->inode), d_type);
if (over) {
ext2_put_page(page);
- goto success;
+ return 0;
}
}
filp->f_pos += le16_to_cpu(de->rec_len);
}
ext2_put_page(page);
}
-
-success:
- ret = 0;
-done:
- filp->f_version = inode->i_version;
- return ret;
+ return 0;
}
/*
* For "nobh" option, we can only work if we don't need to
* read-in the page - otherwise we create buffers to do the IO.
*/
- if (!page_has_buffers(page) && test_opt(inode->i_sb, NOBH)) {
- if (PageUptodate(page)) {
- kaddr = kmap_atomic(page, KM_USER0);
- memset(kaddr + offset, 0, length);
- flush_dcache_page(page);
- kunmap_atomic(kaddr, KM_USER0);
- set_page_dirty(page);
- goto unlock;
- }
+ if (!page_has_buffers(page) && test_opt(inode->i_sb, NOBH) &&
+ ext3_should_writeback_data(inode) && PageUptodate(page)) {
+ kaddr = kmap_atomic(page, KM_USER0);
+ memset(kaddr + offset, 0, length);
+ flush_dcache_page(page);
+ kunmap_atomic(kaddr, KM_USER0);
+ set_page_dirty(page);
+ goto unlock;
}
if (!page_has_buffers(page))
* We have a transaction open. All is sweetness. It also sets
* i_size in generic_commit_write().
*/
- err = page_symlink(inode, symname, l);
+ err = __page_symlink(inode, symname, l,
+ mapping_gfp_mask(inode->i_mapping) & ~__GFP_FS);
if (err) {
ext3_dec_count(handle, inode);
ext3_mark_inode_dirty(handle, inode);
{
int ret;
- ret = -ERESTARTSYS;
- if (mutex_lock_interruptible(PIPE_MUTEX(*inode)))
- goto err_nolock_nocleanup;
-
+ mutex_lock(PIPE_MUTEX(*inode));
if (!inode->i_pipe) {
ret = -ENOMEM;
if(!pipe_new(inode))
err_nocleanup:
mutex_unlock(PIPE_MUTEX(*inode));
-
-err_nolock_nocleanup:
return ret;
}
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
*/
+#include <linux/config.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/file.h>
#include <linux/capability.h>
#include <linux/cdev.h>
#include <linux/fsnotify.h>
+#include <linux/sysctl.h>
+#include <linux/percpu_counter.h>
+
+#include <asm/atomic.h>
/* sysctl tunables... */
struct files_stat_struct files_stat = {
.max_files = NR_FILE
};
-EXPORT_SYMBOL(files_stat); /* Needed by unix.o */
-
/* public. Not pretty! */
- __cacheline_aligned_in_smp DEFINE_SPINLOCK(files_lock);
+__cacheline_aligned_in_smp DEFINE_SPINLOCK(files_lock);
-static DEFINE_SPINLOCK(filp_count_lock);
+static struct percpu_counter nr_files __cacheline_aligned_in_smp;
-/* slab constructors and destructors are called from arbitrary
- * context and must be fully threaded - use a local spinlock
- * to protect files_stat.nr_files
- */
-void filp_ctor(void *objp, struct kmem_cache *cachep, unsigned long cflags)
+static inline void file_free_rcu(struct rcu_head *head)
{
- if ((cflags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
- SLAB_CTOR_CONSTRUCTOR) {
- unsigned long flags;
- spin_lock_irqsave(&filp_count_lock, flags);
- files_stat.nr_files++;
- spin_unlock_irqrestore(&filp_count_lock, flags);
- }
+ struct file *f = container_of(head, struct file, f_u.fu_rcuhead);
+ kmem_cache_free(filp_cachep, f);
}
-void filp_dtor(void *objp, struct kmem_cache *cachep, unsigned long dflags)
+static inline void file_free(struct file *f)
{
- unsigned long flags;
- spin_lock_irqsave(&filp_count_lock, flags);
- files_stat.nr_files--;
- spin_unlock_irqrestore(&filp_count_lock, flags);
+ percpu_counter_dec(&nr_files);
+ call_rcu(&f->f_u.fu_rcuhead, file_free_rcu);
}
-static inline void file_free_rcu(struct rcu_head *head)
+/*
+ * Return the total number of open files in the system
+ */
+static int get_nr_files(void)
{
- struct file *f = container_of(head, struct file, f_u.fu_rcuhead);
- kmem_cache_free(filp_cachep, f);
+ return percpu_counter_read_positive(&nr_files);
}
-static inline void file_free(struct file *f)
+/*
+ * Return the maximum number of open files in the system
+ */
+int get_max_files(void)
{
- call_rcu(&f->f_u.fu_rcuhead, file_free_rcu);
+ return files_stat.max_files;
}
+EXPORT_SYMBOL_GPL(get_max_files);
+
+/*
+ * Handle nr_files sysctl
+ */
+#if defined(CONFIG_SYSCTL) && defined(CONFIG_PROC_FS)
+int proc_nr_files(ctl_table *table, int write, struct file *filp,
+ void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+ files_stat.nr_files = get_nr_files();
+ return proc_dointvec(table, write, filp, buffer, lenp, ppos);
+}
+#else
+int proc_nr_files(ctl_table *table, int write, struct file *filp,
+ void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+ return -ENOSYS;
+}
+#endif
/* Find an unused file structure and return a pointer to it.
* Returns NULL, if there are no more free file structures or
/*
* Privileged users can go above max_files
*/
- if (files_stat.nr_files >= files_stat.max_files &&
- !capable(CAP_SYS_ADMIN))
- goto over;
+ if (get_nr_files() >= files_stat.max_files && !capable(CAP_SYS_ADMIN)) {
+ /*
+ * percpu_counters are inaccurate. Do an expensive check before
+ * we go and fail.
+ */
+ if (percpu_counter_sum(&nr_files) >= files_stat.max_files)
+ goto over;
+ }
f = kmem_cache_alloc(filp_cachep, GFP_KERNEL);
if (f == NULL)
goto fail;
+ percpu_counter_inc(&nr_files);
memset(f, 0, sizeof(*f));
if (security_file_alloc(f))
goto fail_sec;
over:
/* Ran out of filps - report that */
- if (files_stat.nr_files > old_max) {
+ if (get_nr_files() > old_max) {
printk(KERN_INFO "VFS: file-max limit %d reached\n",
- files_stat.max_files);
- old_max = files_stat.nr_files;
+ get_max_files());
+ old_max = get_nr_files();
}
goto fail;
if (files_stat.max_files < NR_FILE)
files_stat.max_files = NR_FILE;
files_defer_init();
+ percpu_counter_init(&nr_files);
}
/* Doesn't hurt to "reset" the validity timeout */
fuse_invalidate_entry_cache(entry);
+
+ /* For negative dentries, always do a fresh lookup */
if (!inode)
return 0;
fuse_lookup_init(req, entry->d_parent->d_inode, entry, &outarg);
request_send(fc, req);
err = req->out.h.error;
+ /* Zero nodeid is same as -ENOENT */
+ if (!err && !outarg.nodeid)
+ err = -ENOENT;
if (!err) {
struct fuse_inode *fi = get_fuse_inode(inode);
if (outarg.nodeid != get_node_id(inode)) {
fuse_lookup_init(req, dir, entry, &outarg);
request_send(fc, req);
err = req->out.h.error;
- if (!err && ((outarg.nodeid && invalid_nodeid(outarg.nodeid)) ||
- !valid_mode(outarg.attr.mode)))
+ /* Zero nodeid is same as -ENOENT, but with valid timeout */
+ if (!err && outarg.nodeid &&
+ (invalid_nodeid(outarg.nodeid) || !valid_mode(outarg.attr.mode)))
err = -EIO;
if (!err && outarg.nodeid) {
inode = fuse_iget(dir->i_sb, outarg.nodeid, outarg.generation,
int err = 0, pointed = 0;
struct jffs2_eraseblock *jeb;
unsigned char *buffer;
- uint32_t crc, ofs, retlen, len;
+ uint32_t crc, ofs, len;
+ size_t retlen;
BUG_ON(tn->csize == 0);
* negative error code on failure.
*/
static inline int read_direntry(struct jffs2_sb_info *c, struct jffs2_raw_node_ref *ref,
- struct jffs2_raw_dirent *rd, uint32_t read, struct jffs2_full_dirent **fdp,
+ struct jffs2_raw_dirent *rd, size_t read, struct jffs2_full_dirent **fdp,
uint32_t *latest_mctime, uint32_t *mctime_ver)
{
struct jffs2_full_dirent *fd;
c->nextblock->dirty_size = 0;
}
#ifdef CONFIG_JFFS2_FS_WRITEBUFFER
- if (!jffs2_can_mark_obsolete(c) && c->nextblock && (c->nextblock->free_size % c->wbuf_pagesize)) {
+ if (!jffs2_can_mark_obsolete(c) && c->wbuf_pagesize && c->nextblock && (c->nextblock->free_size % c->wbuf_pagesize)) {
/* If we're going to start writing into a block which already
contains data, and the end of the data isn't page-aligned,
skip a little and align it. */
lastlblkno = lblkno;
+ LOGSYNC_LOCK(log, flags);
if (mp->lsn != 0) {
/* inherit older/smaller lsn */
logdiff(diffp, mp->lsn, log);
- LOGSYNC_LOCK(log, flags);
if (difft < diffp) {
mp->lsn = lsn;
logdiff(diffp, mp->clsn, log);
if (difft > diffp)
mp->clsn = tblk->clsn;
- LOGSYNC_UNLOCK(log, flags);
} else {
mp->log = log;
mp->lsn = lsn;
/* insert bp after tblock in logsync list */
- LOGSYNC_LOCK(log, flags);
-
log->count++;
list_add(&mp->synclist, &tblk->synclist);
mp->clsn = tblk->clsn;
- LOGSYNC_UNLOCK(log, flags);
}
+ LOGSYNC_UNLOCK(log, flags);
}
/* write the last buffer. */
*/
lsn = tblk->lsn;
log = JFS_SBI(tblk->sb)->log;
+ LOGSYNC_LOCK(log, flags);
if (mp->lsn != 0) {
/* inherit older/smaller lsn */
logdiff(difft, lsn, log);
logdiff(diffp, mp->lsn, log);
- LOGSYNC_LOCK(log, flags);
if (difft < diffp) {
mp->lsn = lsn;
/* move mp after tblock in logsync list */
logdiff(diffp, mp->clsn, log);
if (difft > diffp)
mp->clsn = tblk->clsn;
- LOGSYNC_UNLOCK(log, flags);
} else {
mp->log = log;
mp->lsn = lsn;
/* insert mp after tblock in logsync list */
- LOGSYNC_LOCK(log, flags);
log->count++;
list_add(&mp->synclist, &tblk->synclist);
mp->clsn = tblk->clsn;
- LOGSYNC_UNLOCK(log, flags);
}
+ LOGSYNC_UNLOCK(log, flags);
write_metapage(mp);
return (0);
}
* reclaimed while we're stuck in the unlock call. */
fl->fl_u.nfs_fl.flags &= ~NFS_LCK_GRANTED;
+ /*
+ * Note: the server is supposed to either grant us the unlock
+ * request, or to deny it with NLM_LCK_DENIED_GRACE_PERIOD. In either
+ * case, we want to unlock.
+ */
+ do_vfs_lock(fl);
+
if (req->a_flags & RPC_TASK_ASYNC) {
status = nlmclnt_async_call(req, NLMPROC_UNLOCK,
&nlmclnt_unlock_ops);
/* Hrmf... Do the unlock early since locks_remove_posix()
* really expects us to free the lock synchronously */
- do_vfs_lock(fl);
if (status < 0) {
nlmclnt_release_lockargs(req);
kfree(req);
if (status < 0)
return status;
- do_vfs_lock(fl);
if (resp->status == NLM_LCK_GRANTED)
return 0;
}
}
-int page_symlink(struct inode *inode, const char *symname, int len)
+int __page_symlink(struct inode *inode, const char *symname, int len,
+ gfp_t gfp_mask)
{
struct address_space *mapping = inode->i_mapping;
- struct page *page = grab_cache_page(mapping, 0);
+ struct page *page;
int err = -ENOMEM;
char *kaddr;
+ page = find_or_create_page(mapping, 0, gfp_mask);
if (!page)
goto fail;
err = mapping->a_ops->prepare_write(NULL, page, 0, len-1);
return err;
}
+int page_symlink(struct inode *inode, const char *symname, int len)
+{
+ return __page_symlink(inode, symname, len,
+ mapping_gfp_mask(inode->i_mapping));
+}
+
struct inode_operations page_symlink_inode_operations = {
.readlink = generic_readlink,
.follow_link = page_follow_link_light,
EXPORT_SYMBOL(page_follow_link_light);
EXPORT_SYMBOL(page_put_link);
EXPORT_SYMBOL(page_readlink);
+EXPORT_SYMBOL(__page_symlink);
EXPORT_SYMBOL(page_symlink);
EXPORT_SYMBOL(page_symlink_inode_operations);
EXPORT_SYMBOL(path_lookup);
new_ns = kmalloc(sizeof(struct namespace), GFP_KERNEL);
if (!new_ns)
- goto out;
+ return NULL;
atomic_set(&new_ns->count, 1);
INIT_LIST_HEAD(&new_ns->list);
if (!new_ns->root) {
up_write(&namespace_sem);
kfree(new_ns);
- goto out;
+ return NULL;
}
spin_lock(&vfsmount_lock);
list_add_tail(&new_ns->list, &new_ns->root->mnt_list);
if (altrootmnt)
mntput(altrootmnt);
-out:
return new_ns;
}
#define NFSDBG_FACILITY NFSDBG_VFS
#define MAX_DIRECTIO_SIZE (4096UL << PAGE_SHIFT)
+static void nfs_free_user_pages(struct page **pages, int npages, int do_dirty);
static kmem_cache_t *nfs_direct_cachep;
/*
page_count, (rw == READ), 0,
*pages, NULL);
up_read(¤t->mm->mmap_sem);
+ /*
+ * If we got fewer pages than expected from get_user_pages(),
+ * the user buffer runs off the end of a mapping; return EFAULT.
+ */
+ if (result >= 0 && result < page_count) {
+ nfs_free_user_pages(*pages, result, 0);
+ *pages = NULL;
+ result = -EFAULT;
+ }
}
return result;
}
if (status == 0)
status = nfs4_do_fsinfo(server, fhandle, info);
out:
- return status;
+ return nfs4_map_errors(status);
}
static int _nfs4_proc_getattr(struct nfs_server *server, struct nfs_fh *fhandle, struct nfs_fattr *fattr)
if (copy_from_user(&version, &arg->ca_version, sizeof(int)))
return -EFAULT;
- if (version != NFSCTL_VERSION) {
- printk(KERN_WARNING "nfsd: incompatible version in syscall.\n");
+ if (version != NFSCTL_VERSION)
return -EINVAL;
- }
if (cmd < 0 || cmd >= sizeof(map)/sizeof(map[0]) || !map[cmd].name)
return -EINVAL;
#define define_mask(_name) { \
.attr = { \
.name = #_name, \
+ .owner = THIS_MODULE, \
.mode = S_IRUGO | S_IWUSR, \
}, \
.mask = ML_##_name, \
} \
} while (0)
-#if (BITS_PER_LONG == 32) || defined(CONFIG_X86_64)
+#if (BITS_PER_LONG == 32) || defined(CONFIG_X86_64) || (defined(CONFIG_UML_X86) && defined(CONFIG_64BIT))
#define MLFi64 "lld"
#define MLFu64 "llu"
#define MLFx64 "llx"
if (!ocfs2_table_header) {
printk(KERN_ERR "nodemanager: unable to register sysctl\n");
ret = -ENOMEM; /* or something. */
- goto out;
+ goto out_o2net;
}
ret = o2net_register_hb_callbacks();
o2net_unregister_hb_callbacks();
out_sysctl:
unregister_sysctl_table(ocfs2_table_header);
+out_o2net:
+ o2net_exit();
out:
return ret;
}
{
struct o2net_node *nn = arg;
struct o2net_sock_container *sc = NULL;
- struct o2nm_node *node = NULL;
+ struct o2nm_node *node = NULL, *mynode = NULL;
struct socket *sock = NULL;
struct sockaddr_in myaddr = {0, }, remoteaddr = {0, };
int ret = 0;
goto out;
}
+ mynode = o2nm_get_node_by_num(o2nm_this_node());
+ if (mynode == NULL) {
+ ret = 0;
+ goto out;
+ }
+
spin_lock(&nn->nn_lock);
/* see if we already have one pending or have given up */
if (nn->nn_sc || nn->nn_persistent_error)
sock->sk->sk_allocation = GFP_ATOMIC;
myaddr.sin_family = AF_INET;
+ myaddr.sin_addr.s_addr = (__force u32)mynode->nd_ipv4_address;
myaddr.sin_port = (__force u16)htons(0); /* any port */
ret = sock->ops->bind(sock, (struct sockaddr *)&myaddr,
sizeof(myaddr));
if (ret) {
- mlog(0, "bind failed: %d\n", ret);
+ mlog(ML_ERROR, "bind failed with %d at address %u.%u.%u.%u\n",
+ ret, NIPQUAD(mynode->nd_ipv4_address));
goto out;
}
sc_put(sc);
if (node)
o2nm_node_put(node);
+ if (mynode)
+ o2nm_node_put(mynode);
return;
}
O2NET_DRIVER_READY,
};
-int o2net_init_tcp_sock(struct inode *inode);
int o2net_send_message(u32 msg_type, u32 key, void *data, u32 len,
u8 target_node, int *status);
int o2net_send_message_vec(u32 msg_type, u32 key, struct kvec *vec,
size_t veclen, u8 target_node, int *status);
-int o2net_broadcast_message(u32 msg_type, u32 key, void *data, u32 len,
- struct inode *group);
int o2net_register_handler(u32 msg_type, u32 key, u32 max_len,
o2net_msg_handler_func *func, void *data,
int o2net_init(void);
void o2net_exit(void);
-int o2net_proc_init(struct proc_dir_entry *parent);
-void o2net_proc_exit(struct proc_dir_entry *parent);
#endif /* O2CLUSTER_TCP_H */
#define DLM_THREAD_SHUFFLE_INTERVAL 5 // flush everything every 5 passes
#define DLM_THREAD_MS 200 // flush at least every 200 ms
-#define DLM_HASH_BITS 7
-#define DLM_HASH_SIZE (1 << DLM_HASH_BITS)
-#define DLM_HASH_MASK (DLM_HASH_SIZE - 1)
+#define DLM_HASH_BUCKETS (PAGE_SIZE / sizeof(struct hlist_head))
enum dlm_ast_type {
DLM_AST = 0,
struct dlm_ctxt
{
struct list_head list;
- struct list_head *resources;
+ struct hlist_head *lockres_hash;
struct list_head dirty_list;
struct list_head purge_list;
struct list_head pending_asts;
{
/* WARNING: Please see the comment in dlm_init_lockres before
* adding fields here. */
- struct list_head list;
+ struct hlist_node hash_node;
struct kref refs;
/* please keep these next 3 in this order
void dlm_dump_lock_resources(struct dlm_ctxt *dlm)
{
struct dlm_lock_resource *res;
- struct list_head *iter;
- struct list_head *bucket;
+ struct hlist_node *iter;
+ struct hlist_head *bucket;
int i;
mlog(ML_NOTICE, "struct dlm_ctxt: %s, node=%u, key=%u\n",
}
spin_lock(&dlm->spinlock);
- for (i=0; i<DLM_HASH_SIZE; i++) {
- bucket = &(dlm->resources[i]);
- list_for_each(iter, bucket) {
- res = list_entry(iter, struct dlm_lock_resource, list);
+ for (i=0; i<DLM_HASH_BUCKETS; i++) {
+ bucket = &(dlm->lockres_hash[i]);
+ hlist_for_each_entry(res, iter, bucket, hash_node)
dlm_print_one_lock_resource(res);
- }
}
spin_unlock(&dlm->spinlock);
}
void __dlm_unhash_lockres(struct dlm_lock_resource *lockres)
{
- list_del_init(&lockres->list);
+ hlist_del_init(&lockres->hash_node);
dlm_lockres_put(lockres);
}
void __dlm_insert_lockres(struct dlm_ctxt *dlm,
struct dlm_lock_resource *res)
{
- struct list_head *bucket;
+ struct hlist_head *bucket;
struct qstr *q;
assert_spin_locked(&dlm->spinlock);
q = &res->lockname;
q->hash = full_name_hash(q->name, q->len);
- bucket = &(dlm->resources[q->hash & DLM_HASH_MASK]);
+ bucket = &(dlm->lockres_hash[q->hash % DLM_HASH_BUCKETS]);
/* get a reference for our hashtable */
dlm_lockres_get(res);
- list_add_tail(&res->list, bucket);
+ hlist_add_head(&res->hash_node, bucket);
}
struct dlm_lock_resource * __dlm_lookup_lockres(struct dlm_ctxt *dlm,
unsigned int len)
{
unsigned int hash;
- struct list_head *iter;
+ struct hlist_node *iter;
struct dlm_lock_resource *tmpres=NULL;
- struct list_head *bucket;
+ struct hlist_head *bucket;
mlog_entry("%.*s\n", len, name);
hash = full_name_hash(name, len);
- bucket = &(dlm->resources[hash & DLM_HASH_MASK]);
+ bucket = &(dlm->lockres_hash[hash % DLM_HASH_BUCKETS]);
/* check for pre-existing lock */
- list_for_each(iter, bucket) {
- tmpres = list_entry(iter, struct dlm_lock_resource, list);
+ hlist_for_each(iter, bucket) {
+ tmpres = hlist_entry(iter, struct dlm_lock_resource, hash_node);
if (tmpres->lockname.len == len &&
memcmp(tmpres->lockname.name, name, len) == 0) {
dlm_lockres_get(tmpres);
static void dlm_free_ctxt_mem(struct dlm_ctxt *dlm)
{
- if (dlm->resources)
- free_page((unsigned long) dlm->resources);
+ if (dlm->lockres_hash)
+ free_page((unsigned long) dlm->lockres_hash);
if (dlm->name)
kfree(dlm->name);
mlog(0, "Migrating locks from domain %s\n", dlm->name);
restart:
spin_lock(&dlm->spinlock);
- for (i=0; i<DLM_HASH_SIZE; i++) {
- while (!list_empty(&dlm->resources[i])) {
- res = list_entry(dlm->resources[i].next,
- struct dlm_lock_resource, list);
+ for (i = 0; i < DLM_HASH_BUCKETS; i++) {
+ while (!hlist_empty(&dlm->lockres_hash[i])) {
+ res = hlist_entry(dlm->lockres_hash[i].first,
+ struct dlm_lock_resource, hash_node);
/* need reference when manually grabbing lockres */
dlm_lockres_get(res);
/* this should unhash the lockres
goto leave;
}
- dlm->resources = (struct list_head *) __get_free_page(GFP_KERNEL);
- if (!dlm->resources) {
+ dlm->lockres_hash = (struct hlist_head *) __get_free_page(GFP_KERNEL);
+ if (!dlm->lockres_hash) {
mlog_errno(-ENOMEM);
kfree(dlm->name);
kfree(dlm);
dlm = NULL;
goto leave;
}
- memset(dlm->resources, 0, PAGE_SIZE);
- for (i=0; i<DLM_HASH_SIZE; i++)
- INIT_LIST_HEAD(&dlm->resources[i]);
+ for (i=0; i<DLM_HASH_BUCKETS; i++)
+ INIT_HLIST_HEAD(&dlm->lockres_hash[i]);
strcpy(dlm->name, domain);
dlm->key = key;
/* By the time we're ready to blow this guy away, we shouldn't
* be on any lists. */
- BUG_ON(!list_empty(&res->list));
+ BUG_ON(!hlist_unhashed(&res->hash_node));
BUG_ON(!list_empty(&res->granted));
BUG_ON(!list_empty(&res->converting));
BUG_ON(!list_empty(&res->blocked));
init_waitqueue_head(&res->wq);
spin_lock_init(&res->spinlock);
- INIT_LIST_HEAD(&res->list);
+ INIT_HLIST_NODE(&res->hash_node);
INIT_LIST_HEAD(&res->granted);
INIT_LIST_HEAD(&res->converting);
INIT_LIST_HEAD(&res->blocked);
u8 dead_node, u8 new_master)
{
int i;
- struct list_head *iter, *iter2, *bucket;
+ struct list_head *iter, *iter2;
+ struct hlist_node *hash_iter;
+ struct hlist_head *bucket;
+
struct dlm_lock_resource *res;
mlog_entry_void();
* for now we need to run the whole hash, clear
* the RECOVERING state and set the owner
* if necessary */
- for (i=0; i<DLM_HASH_SIZE; i++) {
- bucket = &(dlm->resources[i]);
- list_for_each(iter, bucket) {
- res = list_entry (iter, struct dlm_lock_resource, list);
+ for (i = 0; i < DLM_HASH_BUCKETS; i++) {
+ bucket = &(dlm->lockres_hash[i]);
+ hlist_for_each_entry(res, hash_iter, bucket, hash_node) {
if (res->state & DLM_LOCK_RES_RECOVERING) {
if (res->owner == dead_node) {
mlog(0, "(this=%u) res %.*s owner=%u "
static void dlm_do_local_recovery_cleanup(struct dlm_ctxt *dlm, u8 dead_node)
{
- struct list_head *iter;
+ struct hlist_node *iter;
struct dlm_lock_resource *res;
int i;
- struct list_head *bucket;
+ struct hlist_head *bucket;
struct dlm_lock *lock;
* can be kicked again to see if any ASTs or BASTs
* need to be fired as a result.
*/
- for (i=0; i<DLM_HASH_SIZE; i++) {
- bucket = &(dlm->resources[i]);
- list_for_each(iter, bucket) {
- res = list_entry (iter, struct dlm_lock_resource, list);
+ for (i = 0; i < DLM_HASH_BUCKETS; i++) {
+ bucket = &(dlm->lockres_hash[i]);
+ hlist_for_each_entry(res, iter, bucket, hash_node) {
/* always prune any $RECOVERY entries for dead nodes,
* otherwise hangs can occur during later recovery */
if (dlm_is_recovery_lock(res->lockname.name,
ret = -EBADR;
if (rec_end > OCFS2_I(inode)->ip_clusters) {
mlog_errno(ret);
+ ocfs2_error(inode->i_sb,
+ "Extent %d at e_blkno %"MLFu64" of inode %"MLFu64" goes past ip_clusters of %u\n",
+ i,
+ le64_to_cpu(rec->e_blkno),
+ OCFS2_I(inode)->ip_blkno,
+ OCFS2_I(inode)->ip_clusters);
goto out_free;
}
ret = -EBADR;
if (blkno) {
mlog_errno(ret);
+ ocfs2_error(inode->i_sb,
+ "Multiple extents for (cpos = %u, clusters = %u) on inode %"MLFu64"; e_blkno %"MLFu64" and rec %d at e_blkno %"MLFu64"\n",
+ cpos, clusters,
+ OCFS2_I(inode)->ip_blkno,
+ blkno, i,
+ le64_to_cpu(rec->e_blkno));
goto out_free;
}
*/
ret = -EBADR;
if (!blkno) {
+ ocfs2_error(inode->i_sb,
+ "No record found for (cpos = %u, clusters = %u) on inode %"MLFu64"\n",
+ cpos, clusters,
+ OCFS2_I(inode)->ip_blkno);
mlog_errno(ret);
goto out_free;
}
for (i = 0; i < le16_to_cpu(el->l_next_free_rec); i++) {
rec = &el->l_recs[i];
+
+ if ((le32_to_cpu(rec->e_cpos) + le32_to_cpu(rec->e_clusters)) >
+ OCFS2_I(inode)->ip_clusters) {
+ ret = -EBADR;
+ mlog_errno(ret);
+ ocfs2_error(inode->i_sb,
+ "Extent %d at e_blkno %"MLFu64" of inode %"MLFu64" goes past ip_clusters of %u\n",
+ i,
+ le64_to_cpu(rec->e_blkno),
+ OCFS2_I(inode)->ip_blkno,
+ OCFS2_I(inode)->ip_clusters);
+ return ret;
+ }
+
ret = ocfs2_extent_map_insert(inode, rec,
le16_to_cpu(el->l_tree_depth));
if (ret) {
OCFS2_I(inode)->ip_map.em_clusters) {
ret = -EBADR;
mlog_errno(ret);
+ ocfs2_error(inode->i_sb,
+ "Zero e_clusters on non-tail extent record at e_blkno %"MLFu64" on inode %"MLFu64"\n",
+ le64_to_cpu(rec->e_blkno),
+ OCFS2_I(inode)->ip_blkno);
return ret;
}
* Existing record in the extent map:
*
* cpos = 10, len = 10
- * |---------|
+ * |---------|
*
* New Record:
*
* cpos = 10, len = 20
- * |------------------|
+ * |------------------|
*
* The passed record is the new on-disk record. The new_clusters value
* is how many clusters were added to the file. If the append is a
struct file *filp = iocb->ki_filp;
struct inode *inode = filp->f_dentry->d_inode;
loff_t newsize, saved_pos;
-#ifdef OCFS2_ORACORE_WORKAROUNDS
- struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
-#endif
mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", filp, buf,
(unsigned int)count,
return -EIO;
}
-#ifdef OCFS2_ORACORE_WORKAROUNDS
- /* ugh, work around some applications which open everything O_DIRECT +
- * O_APPEND and really don't mean to use O_DIRECT. */
- if (osb->s_mount_opt & OCFS2_MOUNT_COMPAT_OCFS &&
- (filp->f_flags & O_APPEND) && (filp->f_flags & O_DIRECT))
- filp->f_flags &= ~O_DIRECT;
-#endif
-
mutex_lock(&inode->i_mutex);
/* to match setattr's i_mutex -> i_alloc_sem -> rw_lock ordering */
if (filp->f_flags & O_DIRECT) {
/* communicate with ocfs2_dio_end_io */
ocfs2_iocb_set_rw_locked(iocb);
-#ifdef OCFS2_ORACORE_WORKAROUNDS
- if (osb->s_mount_opt & OCFS2_MOUNT_COMPAT_OCFS &&
- filp->f_flags & O_DIRECT) {
- unsigned int saved_flags = filp->f_flags;
- int sector_size = 1 << osb->s_sectsize_bits;
-
- if ((saved_pos & (sector_size - 1)) ||
- (count & (sector_size - 1)) ||
- ((unsigned long)buf & (sector_size - 1))) {
- filp->f_flags |= O_SYNC;
- filp->f_flags &= ~O_DIRECT;
- }
-
- ret = generic_file_aio_write_nolock(iocb, &local_iov, 1,
- &iocb->ki_pos);
-
- filp->f_flags = saved_flags;
- } else
-#endif
- ret = generic_file_aio_write_nolock(iocb, &local_iov, 1,
- &iocb->ki_pos);
+ ret = generic_file_aio_write_nolock(iocb, &local_iov, 1, &iocb->ki_pos);
/* buffered aio wouldn't have proper lock coverage today */
BUG_ON(ret == -EIOCBQUEUED && !(filp->f_flags & O_DIRECT));
int ret = 0, rw_level = -1, have_alloc_sem = 0;
struct file *filp = iocb->ki_filp;
struct inode *inode = filp->f_dentry->d_inode;
-#ifdef OCFS2_ORACORE_WORKAROUNDS
- struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
-#endif
mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", filp, buf,
(unsigned int)count,
goto bail;
}
-#ifdef OCFS2_ORACORE_WORKAROUNDS
- if (osb->s_mount_opt & OCFS2_MOUNT_COMPAT_OCFS) {
- if (filp->f_flags & O_DIRECT) {
- int sector_size = 1 << osb->s_sectsize_bits;
-
- if ((pos & (sector_size - 1)) ||
- (count & (sector_size - 1)) ||
- ((unsigned long)buf & (sector_size - 1)) ||
- (i_size_read(inode) & (sector_size -1))) {
- filp->f_flags &= ~O_DIRECT;
- }
- }
- }
-#endif
-
/*
* buffered reads protect themselves in ->readpage(). O_DIRECT reads
* need locks to protect pending reads from racing with truncate.
ocfs2_node_map_init(&osb->mounted_map);
ocfs2_node_map_init(&osb->recovery_map);
ocfs2_node_map_init(&osb->umount_map);
+ ocfs2_node_map_init(&osb->osb_recovering_orphan_dirs);
}
static void ocfs2_do_node_down(int node_num,
#include "dlmglue.h"
#include "extent_map.h"
#include "file.h"
+#include "heartbeat.h"
#include "inode.h"
#include "journal.h"
#include "namei.h"
return status;
}
+/*
+ * Serialize with orphan dir recovery. If the process doing
+ * recovery on this orphan dir does an iget() with the dir
+ * i_mutex held, we'll deadlock here. Instead we detect this
+ * and exit early - recovery will wipe this inode for us.
+ */
+static int ocfs2_check_orphan_recovery_state(struct ocfs2_super *osb,
+ int slot)
+{
+ int ret = 0;
+
+ spin_lock(&osb->osb_lock);
+ if (ocfs2_node_map_test_bit(osb, &osb->osb_recovering_orphan_dirs, slot)) {
+ mlog(0, "Recovery is happening on orphan dir %d, will skip "
+ "this inode\n", slot);
+ ret = -EDEADLK;
+ goto out;
+ }
+ /* This signals to the orphan recovery process that it should
+ * wait for us to handle the wipe. */
+ osb->osb_orphan_wipes[slot]++;
+out:
+ spin_unlock(&osb->osb_lock);
+ return ret;
+}
+
+static void ocfs2_signal_wipe_completion(struct ocfs2_super *osb,
+ int slot)
+{
+ spin_lock(&osb->osb_lock);
+ osb->osb_orphan_wipes[slot]--;
+ spin_unlock(&osb->osb_lock);
+
+ wake_up(&osb->osb_wipe_event);
+}
+
static int ocfs2_wipe_inode(struct inode *inode,
struct buffer_head *di_bh)
{
/* We've already voted on this so it should be readonly - no
* spinlock needed. */
orphaned_slot = OCFS2_I(inode)->ip_orphaned_slot;
+
+ status = ocfs2_check_orphan_recovery_state(osb, orphaned_slot);
+ if (status)
+ return status;
+
orphan_dir_inode = ocfs2_get_system_file_inode(osb,
ORPHAN_DIR_SYSTEM_INODE,
orphaned_slot);
brelse(orphan_dir_bh);
bail:
iput(orphan_dir_inode);
+ ocfs2_signal_wipe_completion(osb, orphaned_slot);
return status;
}
status = ocfs2_wipe_inode(inode, di_bh);
if (status < 0) {
- mlog_errno(status);
+ if (status != -EDEADLK)
+ mlog_errno(status);
goto bail_unlock_inode;
}
return status;
}
-static int ocfs2_recover_orphans(struct ocfs2_super *osb,
- int slot)
+static int ocfs2_queue_orphans(struct ocfs2_super *osb,
+ int slot,
+ struct inode **head)
{
- int status = 0;
- int have_disk_lock = 0;
- struct inode *inode = NULL;
- struct inode *iter;
+ int status;
struct inode *orphan_dir_inode = NULL;
+ struct inode *iter;
unsigned long offset, blk, local;
struct buffer_head *bh = NULL;
struct ocfs2_dir_entry *de;
struct super_block *sb = osb->sb;
- struct ocfs2_inode_info *oi;
-
- mlog(0, "Recover inodes from orphan dir in slot %d\n", slot);
orphan_dir_inode = ocfs2_get_system_file_inode(osb,
ORPHAN_DIR_SYSTEM_INODE,
if (!orphan_dir_inode) {
status = -ENOENT;
mlog_errno(status);
- goto out;
- }
+ return status;
+ }
mutex_lock(&orphan_dir_inode->i_mutex);
status = ocfs2_meta_lock(orphan_dir_inode, NULL, NULL, 0);
if (status < 0) {
- mutex_unlock(&orphan_dir_inode->i_mutex);
mlog_errno(status);
goto out;
}
- have_disk_lock = 1;
offset = 0;
iter = NULL;
if (!bh)
status = -EINVAL;
if (status < 0) {
- mutex_unlock(&orphan_dir_inode->i_mutex);
if (bh)
brelse(bh);
mlog_errno(status);
- goto out;
+ goto out_unlock;
}
local = 0;
if (!ocfs2_check_dir_entry(orphan_dir_inode,
de, bh, local)) {
- mutex_unlock(&orphan_dir_inode->i_mutex);
status = -EINVAL;
mlog_errno(status);
brelse(bh);
- goto out;
+ goto out_unlock;
}
local += le16_to_cpu(de->rec_len);
mlog(0, "queue orphan %"MLFu64"\n",
OCFS2_I(iter)->ip_blkno);
- OCFS2_I(iter)->ip_next_orphan = inode;
- inode = iter;
+ /* No locking is required for the next_orphan
+ * queue as there is only ever a single
+ * process doing orphan recovery. */
+ OCFS2_I(iter)->ip_next_orphan = *head;
+ *head = iter;
}
brelse(bh);
}
- mutex_unlock(&orphan_dir_inode->i_mutex);
+out_unlock:
ocfs2_meta_unlock(orphan_dir_inode, 0);
- have_disk_lock = 0;
-
+out:
+ mutex_unlock(&orphan_dir_inode->i_mutex);
iput(orphan_dir_inode);
- orphan_dir_inode = NULL;
+ return status;
+}
+
+static int ocfs2_orphan_recovery_can_continue(struct ocfs2_super *osb,
+ int slot)
+{
+ int ret;
+
+ spin_lock(&osb->osb_lock);
+ ret = !osb->osb_orphan_wipes[slot];
+ spin_unlock(&osb->osb_lock);
+ return ret;
+}
+
+static void ocfs2_mark_recovering_orphan_dir(struct ocfs2_super *osb,
+ int slot)
+{
+ spin_lock(&osb->osb_lock);
+ /* Mark ourselves such that new processes in delete_inode()
+ * know to quit early. */
+ ocfs2_node_map_set_bit(osb, &osb->osb_recovering_orphan_dirs, slot);
+ while (osb->osb_orphan_wipes[slot]) {
+ /* If any processes are already in the middle of an
+ * orphan wipe on this dir, then we need to wait for
+ * them. */
+ spin_unlock(&osb->osb_lock);
+ wait_event_interruptible(osb->osb_wipe_event,
+ ocfs2_orphan_recovery_can_continue(osb, slot));
+ spin_lock(&osb->osb_lock);
+ }
+ spin_unlock(&osb->osb_lock);
+}
+
+static void ocfs2_clear_recovering_orphan_dir(struct ocfs2_super *osb,
+ int slot)
+{
+ ocfs2_node_map_clear_bit(osb, &osb->osb_recovering_orphan_dirs, slot);
+}
+
+/*
+ * Orphan recovery. Each mounted node has it's own orphan dir which we
+ * must run during recovery. Our strategy here is to build a list of
+ * the inodes in the orphan dir and iget/iput them. The VFS does
+ * (most) of the rest of the work.
+ *
+ * Orphan recovery can happen at any time, not just mount so we have a
+ * couple of extra considerations.
+ *
+ * - We grab as many inodes as we can under the orphan dir lock -
+ * doing iget() outside the orphan dir risks getting a reference on
+ * an invalid inode.
+ * - We must be sure not to deadlock with other processes on the
+ * system wanting to run delete_inode(). This can happen when they go
+ * to lock the orphan dir and the orphan recovery process attempts to
+ * iget() inside the orphan dir lock. This can be avoided by
+ * advertising our state to ocfs2_delete_inode().
+ */
+static int ocfs2_recover_orphans(struct ocfs2_super *osb,
+ int slot)
+{
+ int ret = 0;
+ struct inode *inode = NULL;
+ struct inode *iter;
+ struct ocfs2_inode_info *oi;
+
+ mlog(0, "Recover inodes from orphan dir in slot %d\n", slot);
+
+ ocfs2_mark_recovering_orphan_dir(osb, slot);
+ ret = ocfs2_queue_orphans(osb, slot, &inode);
+ ocfs2_clear_recovering_orphan_dir(osb, slot);
+
+ /* Error here should be noted, but we want to continue with as
+ * many queued inodes as we've got. */
+ if (ret)
+ mlog_errno(ret);
while (inode) {
oi = OCFS2_I(inode);
inode = iter;
}
-out:
- if (have_disk_lock)
- ocfs2_meta_unlock(orphan_dir_inode, 0);
-
- if (orphan_dir_inode)
- iput(orphan_dir_inode);
-
- return status;
+ return ret;
}
static int ocfs2_wait_on_mount(struct ocfs2_super *osb)
OCFS2_MOUNT_NOINTR = 1 << 2, /* Don't catch signals */
OCFS2_MOUNT_ERRORS_PANIC = 1 << 3, /* Panic on errors */
OCFS2_MOUNT_DATA_WRITEBACK = 1 << 4, /* No data ordering */
-#ifdef OCFS2_ORACORE_WORKAROUNDS
- OCFS2_MOUNT_COMPAT_OCFS = 1 << 30, /* ocfs1 compatibility mode */
-#endif
};
#define OCFS2_OSB_SOFT_RO 0x0001
struct inode *osb_tl_inode;
struct buffer_head *osb_tl_bh;
struct work_struct osb_truncate_log_wq;
+
+ struct ocfs2_node_map osb_recovering_orphan_dirs;
+ unsigned int *osb_orphan_wipes;
+ wait_queue_head_t osb_wipe_event;
};
#define OCFS2_SB(sb) ((struct ocfs2_super *)(sb)->s_fs_info)
/* Journal limits (in bytes) */
#define OCFS2_MIN_JOURNAL_SIZE (4 * 1024 * 1024)
-#define OCFS2_MAX_JOURNAL_SIZE (500 * 1024 * 1024)
struct ocfs2_system_inode_info {
char *si_name;
}
mlog(ML_NOTICE, "max_slots for this device: %u\n", osb->max_slots);
+ init_waitqueue_head(&osb->osb_wipe_event);
+ osb->osb_orphan_wipes = kcalloc(osb->max_slots,
+ sizeof(*osb->osb_orphan_wipes),
+ GFP_KERNEL);
+ if (!osb->osb_orphan_wipes) {
+ status = -ENOMEM;
+ mlog_errno(status);
+ goto bail;
+ }
+
osb->s_feature_compat =
le32_to_cpu(OCFS2_RAW_SB(di)->s_feature_compat);
osb->s_feature_ro_compat =
if (osb->slot_info)
ocfs2_free_slot_info(osb->slot_info);
+ kfree(osb->osb_orphan_wipes);
/* FIXME
* This belongs in journal shutdown, but because we have to
* allocate osb->journal at the start of ocfs2_initalize_osb(),
ibm_partition(struct parsed_partitions *state, struct block_device *bdev)
{
int blocksize, offset, size;
+ loff_t i_size;
dasd_information_t *info;
struct hd_geometry *geo;
char type[5] = {0,};
unsigned char *data;
Sector sect;
+ blocksize = bdev_hardsect_size(bdev);
+ if (blocksize <= 0)
+ return 0;
+ i_size = i_size_read(bdev->bd_inode);
+ if (i_size == 0)
+ return 0;
+
if ((info = kmalloc(sizeof(dasd_information_t), GFP_KERNEL)) == NULL)
goto out_noinfo;
if ((geo = kmalloc(sizeof(struct hd_geometry), GFP_KERNEL)) == NULL)
if (ioctl_by_bdev(bdev, BIODASDINFO, (unsigned long)info) != 0 ||
ioctl_by_bdev(bdev, HDIO_GETGEO, (unsigned long)geo) != 0)
goto out_noioctl;
-
- if ((blocksize = bdev_hardsect_size(bdev)) <= 0)
- goto out_badsect;
/*
* Get volume label, extract name and type.
} else {
printk("CMS1/%8s:", name);
offset = (info->label_block + 1);
- size = bdev->bd_inode->i_size >> 9;
+ size = i_size >> 9;
}
put_partition(state, 1, offset*(blocksize >> 9),
size-offset*(blocksize >> 9));
else
printk("(nonl)/%8s:", name);
offset = (info->label_block + 1);
- size = (bdev->bd_inode->i_size >> 9);
+ size = i_size >> 9;
put_partition(state, 1, offset*(blocksize >> 9),
size-offset*(blocksize >> 9));
}
return 1;
out_readerr:
-out_badsect:
out_noioctl:
kfree(label);
out_nolab:
.fasync = pipe_rdwr_fasync,
};
-struct file_operations read_pipe_fops = {
+static struct file_operations read_pipe_fops = {
.llseek = no_llseek,
.read = pipe_read,
.readv = pipe_readv,
.fasync = pipe_read_fasync,
};
-struct file_operations write_pipe_fops = {
+static struct file_operations write_pipe_fops = {
.llseek = no_llseek,
.read = bad_pipe_r,
.write = pipe_write,
.fasync = pipe_write_fasync,
};
-struct file_operations rdwr_pipe_fops = {
+static struct file_operations rdwr_pipe_fops = {
.llseek = no_llseek,
.read = pipe_read,
.readv = pipe_readv,
{
pte_t *pte, ptent;
spinlock_t *ptl;
- unsigned long pfn;
struct page *page;
pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
continue;
mss->resident += PAGE_SIZE;
- pfn = pte_pfn(ptent);
- if (!pfn_valid(pfn))
+
+ page = vm_normal_page(vma, addr, ptent);
+ if (!page)
continue;
- page = pfn_to_page(pfn);
- if (page_count(page) >= 2) {
+ if (page_mapcount(page) >= 2) {
if (pte_dirty(ptent))
mss->shared_dirty += PAGE_SIZE;
else
struct mem_size_stats mss;
memset(&mss, 0, sizeof mss);
- if (vma->vm_mm)
+ if (vma->vm_mm && !is_vm_hugetlb_page(vma))
smaps_pgd_range(vma, vma->vm_start, vma->vm_end, &mss);
return show_map_internal(m, v, &mss);
}
inode->i_gid = dir->i_gid;
d_instantiate(dentry, inode);
dget(dentry);
+ dir->i_mtime = dir->i_ctime = CURRENT_TIME;
} else
iput(inode);
}
partially overwritten pages, if needed. And lock the pages,
so that nobody else can access these until we are done.
We get number of actual blocks needed as a result. */
- blocks_to_allocate =
- reiserfs_prepare_file_region_for_write(inode, pos,
- num_pages,
- write_bytes,
- prepared_pages);
- if (blocks_to_allocate < 0) {
- res = blocks_to_allocate;
+ res = reiserfs_prepare_file_region_for_write(inode, pos,
+ num_pages,
+ write_bytes,
+ prepared_pages);
+ if (res < 0) {
reiserfs_release_claimed_blocks(inode->i_sb,
num_pages <<
(PAGE_CACHE_SHIFT -
break;
}
+ blocks_to_allocate = res;
+
/* First we correct our estimate of how many blocks we need */
reiserfs_release_claimed_blocks(inode->i_sb,
(num_pages <<
reiserfs_write_lock(inode->i_sb);
version = get_inode_item_key_version(inode);
- if (block < 0) {
- reiserfs_write_unlock(inode->i_sb);
- return -EIO;
- }
-
if (!file_capable(inode, block)) {
reiserfs_write_unlock(inode->i_sb);
return -EFBIG;
//pos_in_item * inode->i_sb->s_blocksize,
TYPE_INDIRECT, 3); // key type is unimportant
+ RFALSE(cpu_key_k_offset(&tmp_key) > cpu_key_k_offset(&key),
+ "green-805: invalid offset");
blocks_needed =
1 +
((cpu_key_k_offset(&key) -
cpu_key_k_offset(&tmp_key)) >> inode->i_sb->
s_blocksize_bits);
- RFALSE(blocks_needed < 0, "green-805: invalid offset");
if (blocks_needed == 1) {
un = &unf_single;
return 1;
}
jh = (struct reiserfs_journal_header *)(journal->j_header_bh->b_data);
- if (le32_to_cpu(jh->j_first_unflushed_offset) >= 0 &&
- le32_to_cpu(jh->j_first_unflushed_offset) <
+ if (le32_to_cpu(jh->j_first_unflushed_offset) <
SB_ONDISK_JOURNAL_SIZE(p_s_sb)
&& le32_to_cpu(jh->j_last_flush_trans_id) > 0) {
oldest_start =
/* mark, that this generation number is used */
if (de->de_gen_number_bit_string)
set_bit(GET_GENERATION_NUMBER(deh_offset(deh)),
- (unsigned long *)de->de_gen_number_bit_string);
+ de->de_gen_number_bit_string);
// calculate pointer to name and namelen
de->de_entry_num = i;
struct reiserfs_de_head *deh;
INITIALIZE_PATH(path);
struct reiserfs_dir_entry de;
- int bit_string[MAX_GENERATION_NUMBER / (sizeof(int) * 8) + 1];
+ DECLARE_BITMAP(bit_string, MAX_GENERATION_NUMBER + 1);
int gen_number;
char small_buf[32 + DEH_SIZE]; /* 48 bytes now and we avoid kmalloc
if we create file with short name */
/* find the proper place for the new entry */
memset(bit_string, 0, sizeof(bit_string));
- de.de_gen_number_bit_string = (char *)bit_string;
+ de.de_gen_number_bit_string = bit_string;
retval = reiserfs_find_entry(dir, name, namelen, &path, &de);
if (retval != NAME_NOT_FOUND) {
if (buffer != small_buf)
}
gen_number =
- find_first_zero_bit((unsigned long *)bit_string,
+ find_first_zero_bit(bit_string,
MAX_GENERATION_NUMBER + 1);
if (gen_number > MAX_GENERATION_NUMBER) {
/* there is no free generation number */
}
inode->i_uid = le32_to_cpu(fe->uid);
- if ( inode->i_uid == -1 ) inode->i_uid = UDF_SB(inode->i_sb)->s_uid;
+ if (inode->i_uid == -1 || UDF_QUERY_FLAG(inode->i_sb,
+ UDF_FLAG_UID_IGNORE))
+ inode->i_uid = UDF_SB(inode->i_sb)->s_uid;
inode->i_gid = le32_to_cpu(fe->gid);
- if ( inode->i_gid == -1 ) inode->i_gid = UDF_SB(inode->i_sb)->s_gid;
+ if (inode->i_gid == -1 || UDF_QUERY_FLAG(inode->i_sb,
+ UDF_FLAG_GID_IGNORE))
+ inode->i_gid = UDF_SB(inode->i_sb)->s_gid;
inode->i_nlink = le16_to_cpu(fe->fileLinkCount);
if (!inode->i_nlink)
return err;
}
- if (inode->i_uid != UDF_SB(inode->i_sb)->s_uid)
+ if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_UID_FORGET))
+ fe->uid = cpu_to_le32(-1);
+ else if (inode->i_uid != UDF_SB(inode->i_sb)->s_uid)
fe->uid = cpu_to_le32(inode->i_uid);
- if (inode->i_gid != UDF_SB(inode->i_sb)->s_gid)
+ if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_GID_FORGET))
+ fe->gid = cpu_to_le32(-1);
+ else if (inode->i_gid != UDF_SB(inode->i_sb)->s_gid)
fe->gid = cpu_to_le32(inode->i_gid);
udfperms = ((inode->i_mode & S_IRWXO) ) |
Opt_gid, Opt_uid, Opt_umask, Opt_session, Opt_lastblock,
Opt_anchor, Opt_volume, Opt_partition, Opt_fileset,
Opt_rootdir, Opt_utf8, Opt_iocharset,
- Opt_err
+ Opt_err, Opt_uforget, Opt_uignore, Opt_gforget, Opt_gignore
};
static match_table_t tokens = {
{Opt_adinicb, "adinicb"},
{Opt_shortad, "shortad"},
{Opt_longad, "longad"},
+ {Opt_uforget, "uid=forget"},
+ {Opt_uignore, "uid=ignore"},
+ {Opt_gforget, "gid=forget"},
+ {Opt_gignore, "gid=ignore"},
{Opt_gid, "gid=%u"},
{Opt_uid, "uid=%u"},
{Opt_umask, "umask=%o"},
uopt->flags |= (1 << UDF_FLAG_NLS_MAP);
break;
#endif
+ case Opt_uignore:
+ uopt->flags |= (1 << UDF_FLAG_UID_IGNORE);
+ break;
+ case Opt_uforget:
+ uopt->flags |= (1 << UDF_FLAG_UID_FORGET);
+ break;
+ case Opt_gignore:
+ uopt->flags |= (1 << UDF_FLAG_GID_IGNORE);
+ break;
+ case Opt_gforget:
+ uopt->flags |= (1 << UDF_FLAG_GID_FORGET);
+ break;
default:
printk(KERN_ERR "udf: bad mount option \"%s\" "
"or missing value\n", p);
#define UDF_FLAG_VARCONV 8
#define UDF_FLAG_NLS_MAP 9
#define UDF_FLAG_UTF8 10
+#define UDF_FLAG_UID_FORGET 11 /* save -1 for uid to disk */
+#define UDF_FLAG_UID_IGNORE 12 /* use sb uid instead of on disk uid */
+#define UDF_FLAG_GID_FORGET 13
+#define UDF_FLAG_GID_IGNORE 14
#define UDF_PART_FLAG_UNALLOC_BITMAP 0x0001
#define UDF_PART_FLAG_UNALLOC_TABLE 0x0002
/* First sum forwards in this page */
do {
- if (mapped != buffer_mapped(bh))
+ if (!buffer_uptodate(bh) || (mapped != buffer_mapped(bh)))
return total;
total += bh->b_size;
} while ((bh = bh->b_this_page) != head);
kmem_zone_t *qm_dqtrxzone;
STATIC kmem_shaker_t xfs_qm_shaker;
+STATIC cred_t xfs_zerocr;
+STATIC xfs_inode_t xfs_zeroino;
+
STATIC void xfs_qm_list_init(xfs_dqlist_t *, char *, int);
STATIC void xfs_qm_list_destroy(xfs_dqlist_t *);
xfs_trans_t *tp;
int error;
unsigned long s;
- cred_t zerocr;
- xfs_inode_t zeroino;
int committed;
tp = xfs_trans_alloc(mp, XFS_TRANS_QM_QINOCREATE);
xfs_trans_cancel(tp, 0);
return error;
}
- memset(&zerocr, 0, sizeof(zerocr));
- memset(&zeroino, 0, sizeof(zeroino));
- if ((error = xfs_dir_ialloc(&tp, &zeroino, S_IFREG, 1, 0,
- &zerocr, 0, 1, ip, &committed))) {
+ if ((error = xfs_dir_ialloc(&tp, &xfs_zeroino, S_IFREG, 1, 0,
+ &xfs_zerocr, 0, 1, ip, &committed))) {
xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES |
XFS_TRANS_ABORT);
return error;
/*
* Lock the inode.
*/
- if ((error = xfs_trans_iget(mp, tp, ino, 0, XFS_ILOCK_EXCL, &ip)))
+ if ((error = xfs_trans_iget(mp, tp, ino, 0,
+ XFS_ILOCK_EXCL, &ip)))
goto error_exit;
XFS_BMAP_INIT(&flist, &firstblock);
/*
/*
* Lock the bitmap inode.
*/
- if ((error = xfs_trans_iget(mp, tp, ino, 0, XFS_ILOCK_EXCL,
- &ip)))
+ if ((error = xfs_trans_iget(mp, tp, ino, 0,
+ XFS_ILOCK_EXCL, &ip)))
goto error_exit;
/*
* Get a buffer for the block.
/*
* Lock out other callers by grabbing the bitmap inode lock.
*/
- if ((error = xfs_trans_iget(mp, tp, 0, mp->m_sb.sb_rbmino,
- XFS_ILOCK_EXCL, &ip)))
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0,
+ XFS_ILOCK_EXCL, &ip)))
goto error_exit;
ASSERT(ip == mp->m_rbmip);
/*
/*
* Get the summary inode into the transaction.
*/
- if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rsumino,
- 0, XFS_ILOCK_EXCL, &ip)))
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rsumino, 0,
+ XFS_ILOCK_EXCL, &ip)))
goto error_exit;
ASSERT(ip == mp->m_rsumip);
/*
/*
* Lock out other callers by grabbing the bitmap inode lock.
*/
- error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0, XFS_ILOCK_EXCL, &ip);
- if (error) {
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0,
+ XFS_ILOCK_EXCL, &ip)))
return error;
- }
sumbp = NULL;
/*
* Allocate by size, or near another block, or exactly at some block.
/*
* Synchronize by locking the bitmap inode.
*/
- error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0, XFS_ILOCK_EXCL, &ip);
- if (error) {
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0,
+ XFS_ILOCK_EXCL, &ip)))
return error;
- }
#if defined(__KERNEL__) && defined(DEBUG)
/*
* Check to see that this whole range is currently allocated.
__uint64_t seq; /* sequence number of file creation */
__uint64_t *seqp; /* pointer to seqno in inode */
- error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0, XFS_ILOCK_EXCL, &ip);
- if (error)
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0,
+ XFS_ILOCK_EXCL, &ip)))
return error;
ASSERT(ip == mp->m_rbmip);
seqp = (__uint64_t *)&ip->i_d.di_atime;
unsigned int save[FP_SOFT_SIZE]; /* undefined information */
};
+#define IWMMXT_SIZE 0x98
+
struct iwmmxt_struct {
- unsigned int save[0x98/sizeof(int) + 1];
+ unsigned int save[IWMMXT_SIZE / sizeof(unsigned int)];
};
union fp_state {
return ret;
}
+extern void disable_hlt(void);
+extern void enable_hlt(void);
+
#endif /* __ASSEMBLY__ */
#define arch_align_stack(x) (x)
struct cpu_context_save cpu_context; /* cpu context */
__u8 used_cp[16]; /* thread used copro */
unsigned long tp_value;
- union fp_state fpstate;
+ union fp_state fpstate __attribute__((aligned(8)));
union vfp_state vfpstate;
struct restart_block restart_block;
};
asm("mcr%? p15, 0, %0, c8, c6, 1" : : "r" (kaddr));
if (tlb_flag(TLB_V6_I_PAGE))
asm("mcr%? p15, 0, %0, c8, c5, 1" : : "r" (kaddr));
+
+ /* The ARM ARM states that the completion of a TLB maintenance
+ * operation is only guaranteed by a DSB instruction
+ */
+ if (tlb_flag(TLB_V6_U_PAGE | TLB_V6_D_PAGE | TLB_V6_I_PAGE))
+ asm("mcr%? p15, 0, %0, c7, c10, 4" : : "r" (zero));
}
/*
#define __get_unaligned(ptr, size) ({ \
const void *__gu_p = ptr; \
- __typeof__(*(ptr)) val; \
+ __u64 val; \
switch (size) { \
case 1: \
val = *(const __u8 *)__gu_p; \
default: \
bad_unaligned_access_length(); \
}; \
- val; \
+ (__typeof__(*(ptr)))val; \
})
#define __put_unaligned(val, ptr, size) \
void switch_ipi_to_APIC_timer(void *cpumask);
#define ARCH_APICTIMER_STOPS_ON_C3 1
+extern int timer_over_8254;
+
#else /* !CONFIG_X86_LOCAL_APIC */
static inline void lapic_shutdown(void) { }
* to ACPI3.0, this limit will be removed. The notion of "compact nodes"
* should be deleted and TIOs should be included in MAX_NUMNODES.
*/
-#define MAX_COMPACT_NODES 512
+#define MAX_TIO_NODES MAX_NUMNODES
+#define MAX_COMPACT_NODES (MAX_NUMNODES + MAX_TIO_NODES)
/*
* Maximum number of nodes in all partitions and in all coherency domains.
}
#ifdef CONFIG_RMW_INSNS
+
static inline int atomic_add_return(int i, atomic_t *v)
{
int t, tmp;
: "g" (i), "2" (atomic_read(v)));
return t;
}
+
+#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
#else /* !CONFIG_RMW_INSNS */
+
static inline int atomic_add_return(int i, atomic_t * v)
{
unsigned long flags;
return t;
}
+
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+ unsigned long flags;
+ int prev;
+
+ local_irq_save(flags);
+ prev = atomic_read(v);
+ if (prev == old)
+ atomic_set(v, new);
+ local_irq_restore(flags);
+ return prev;
+}
+
+static inline int atomic_xchg(atomic_t *v, int new)
+{
+ unsigned long flags;
+ int prev;
+
+ local_irq_save(flags);
+ prev = atomic_read(v);
+ atomic_set(v, new);
+ local_irq_restore(flags);
+ return prev;
+}
+
#endif /* !CONFIG_RMW_INSNS */
#define atomic_dec_return(v) atomic_sub_return(1, (v))
__asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask));
}
-#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
#define atomic_add_unless(v, a, u) \
({ \
int c, old; \
" subu %0, %1, %3 \n"
" bltz %0, 1f \n"
" sc %0, %2 \n"
+ " .set noreorder \n"
" beqzl %0, 1b \n"
+ " subu %0, %1, %3 \n"
+ " .set reorder \n"
" sync \n"
"1: \n"
" .set mips0 \n"
" subu %0, %1, %3 \n"
" bltz %0, 1f \n"
" sc %0, %2 \n"
+ " .set noreorder \n"
" beqz %0, 1b \n"
+ " subu %0, %1, %3 \n"
+ " .set reorder \n"
" sync \n"
"1: \n"
" .set mips0 \n"
" dsubu %0, %1, %3 \n"
" bltz %0, 1f \n"
" scd %0, %2 \n"
+ " .set noreorder \n"
" beqzl %0, 1b \n"
+ " dsubu %0, %1, %3 \n"
+ " .set reorder \n"
" sync \n"
"1: \n"
" .set mips0 \n"
" dsubu %0, %1, %3 \n"
" bltz %0, 1f \n"
" scd %0, %2 \n"
+ " .set noreorder \n"
" beqz %0, 1b \n"
+ " dsubu %0, %1, %3 \n"
+ " .set reorder \n"
" sync \n"
"1: \n"
" .set mips0 \n"
#ifndef cpu_has_ic_fills_f_dc
#define cpu_has_ic_fills_f_dc (cpu_data[0].icache.flags & MIPS_CACHE_IC_F_DC)
#endif
+#ifndef cpu_has_pindexed_dcache
+#define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
+#endif
/*
* I-Cache snoops remote store. This only matters on SMP. Some multiprocessors
#define MIPS_CACHE_ALIASES 0x00000004 /* Cache could have aliases */
#define MIPS_CACHE_IC_F_DC 0x00000008 /* Ic can refill from D-cache */
#define MIPS_IC_SNOOPS_REMOTE 0x00000010 /* Ic snoops remote stores */
+#define MIPS_CACHE_PINDEX 0x00000020 /* Physically indexed cache */
struct cpuinfo_mips {
unsigned long udelay_val;
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2003, 2004 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) MIPS Technologies, Inc.
+ * written by Ralf Baechle <ralf@linux-mips.org>
*/
#ifndef _ASM_HAZARDS_H
#define _ASM_HAZARDS_H
#define irq_disable_hazard
_ehb
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
- defined(CONFIG_CPU_SB1)
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
/*
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
#else /* __ASSEMBLY__ */
__asm__(
- " .macro _ssnop \n\t"
- " sll $0, $0, 1 \n\t"
- " .endm \n\t"
- " \n\t"
- " .macro _ehb \n\t"
- " sll $0, $0, 3 \n\t"
- " .endm \n\t");
+ " .macro _ssnop \n"
+ " sll $0, $0, 1 \n"
+ " .endm \n"
+ " \n"
+ " .macro _ehb \n"
+ " sll $0, $0, 3 \n"
+ " .endm \n");
#ifdef CONFIG_CPU_RM9000
#define mtc0_tlbw_hazard() \
__asm__ __volatile__( \
- ".set\tmips32\n\t" \
- "_ssnop; _ssnop; _ssnop; _ssnop\n\t" \
- ".set\tmips0")
+ " .set mips32 \n" \
+ " _ssnop \n" \
+ " _ssnop \n" \
+ " _ssnop \n" \
+ " _ssnop \n" \
+ " .set mips0 \n")
#define tlbw_use_hazard() \
__asm__ __volatile__( \
- ".set\tmips32\n\t" \
- "_ssnop; _ssnop; _ssnop; _ssnop\n\t" \
- ".set\tmips0")
-
-#define back_to_back_c0_hazard() do { } while (0)
+ " .set mips32 \n" \
+ " _ssnop \n" \
+ " _ssnop \n" \
+ " _ssnop \n" \
+ " _ssnop \n" \
+ " .set mips0 \n")
#else
*/
#define mtc0_tlbw_hazard() \
__asm__ __volatile__( \
- ".set noreorder\n\t" \
- "nop; nop; nop; nop; nop; nop;\n\t" \
- ".set reorder\n\t")
+ " .set noreorder \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ " .set reorder \n")
#define tlbw_use_hazard() \
__asm__ __volatile__( \
- ".set noreorder\n\t" \
- "nop; nop; nop; nop; nop; nop;\n\t" \
- ".set reorder\n\t")
+ " .set noreorder \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ " .set reorder \n")
#endif
#ifdef CONFIG_CPU_MIPSR2
-__asm__(
- " .macro\tirq_enable_hazard \n\t"
- " _ehb \n\t"
- " .endm \n\t"
- " \n\t"
- " .macro\tirq_disable_hazard \n\t"
- " _ehb \n\t"
- " .endm \n\t"
- " \n\t"
- " .macro\tback_to_back_c0_hazard \n\t"
- " _ehb \n\t"
- " .endm");
-
-#define irq_enable_hazard() \
- __asm__ __volatile__( \
- "irq_enable_hazard")
+__asm__(" .macro irq_enable_hazard \n"
+ " _ehb \n"
+ " .endm \n"
+ " \n"
+ " .macro irq_disable_hazard \n"
+ " _ehb \n"
+ " .endm \n");
-#define irq_disable_hazard() \
- __asm__ __volatile__( \
- "irq_disable_hazard")
-
-#define back_to_back_c0_hazard() \
- __asm__ __volatile__( \
- "back_to_back_c0_hazard")
-
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
- defined(CONFIG_CPU_SB1)
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
/*
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
*/
__asm__(
- " .macro\tirq_enable_hazard \n\t"
- " .endm \n\t"
- " \n\t"
- " .macro\tirq_disable_hazard \n\t"
- " .endm");
-
-#define irq_enable_hazard() do { } while (0)
-#define irq_disable_hazard() do { } while (0)
-
-#define back_to_back_c0_hazard() do { } while (0)
+ " .macro irq_enable_hazard \n"
+ " .endm \n"
+ " \n"
+ " .macro irq_disable_hazard \n"
+ " .endm \n");
#else
*/
__asm__(
- " # \n\t"
- " # There is a hazard but we do not care \n\t"
- " # \n\t"
- " .macro\tirq_enable_hazard \n\t"
- " .endm \n\t"
- " \n\t"
- " .macro\tirq_disable_hazard \n\t"
- " _ssnop; _ssnop; _ssnop \n\t"
- " .endm");
+ " # \n"
+ " # There is a hazard but we do not care \n"
+ " # \n"
+ " .macro\tirq_enable_hazard \n"
+ " .endm \n"
+ " \n"
+ " .macro\tirq_disable_hazard \n"
+ " _ssnop \n"
+ " _ssnop \n"
+ " _ssnop \n"
+ " .endm \n");
-#define irq_enable_hazard() do { } while (0)
+#endif
+
+#define irq_enable_hazard() \
+ __asm__ __volatile__("irq_enable_hazard")
#define irq_disable_hazard() \
- __asm__ __volatile__( \
- "irq_disable_hazard")
+ __asm__ __volatile__("irq_disable_hazard")
-#define back_to_back_c0_hazard() \
- __asm__ __volatile__( \
- " .set noreorder \n" \
- " nop; nop; nop \n" \
- " .set reorder \n")
+
+/*
+ * Back-to-back hazards -
+ *
+ * What is needed to separate a move to cp0 from a subsequent read from the
+ * same cp0 register?
+ */
+#ifdef CONFIG_CPU_MIPSR2
+
+__asm__(" .macro back_to_back_c0_hazard \n"
+ " _ehb \n"
+ " .endm \n");
+
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
+ defined(CONFIG_CPU_SB1)
+
+__asm__(" .macro back_to_back_c0_hazard \n"
+ " .endm \n");
+
+#else
+
+__asm__(" .macro back_to_back_c0_hazard \n"
+ " .set noreorder \n"
+ " _ssnop \n"
+ " _ssnop \n"
+ " _ssnop \n"
+ " .set reorder \n"
+ " .endm");
#endif
+#define back_to_back_c0_hazard() \
+ __asm__ __volatile__("back_to_back_c0_hazard")
+
+
+/*
+ * Instruction execution hazard
+ */
#ifdef CONFIG_CPU_MIPSR2
/*
* gcc has a tradition of misscompiling the previous construct using the
* for more details.
*
* Copyright (C) 1994, 1995 Waldorf GmbH
- * Copyright (C) 1994 - 2000 Ralf Baechle
+ * Copyright (C) 1994 - 2000, 06 Ralf Baechle
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
* Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
* Author: Maciej W. Rozycki <macro@mips.com>
*/
extern const unsigned long mips_io_port_base;
-#define set_io_port_base(base) \
- do { * (unsigned long *) &mips_io_port_base = (base); } while (0)
+/*
+ * Gcc will generate code to load the value of mips_io_port_base after each
+ * function call which may be fairly wasteful in some cases. So we don't
+ * play quite by the book. We tell gcc mips_io_port_base is a long variable
+ * which solves the code generation issue. Now we need to violate the
+ * aliasing rules a little to make initialization possible and finally we
+ * will need the barrier() to fight side effects of the aliasing chat.
+ * This trickery will eventually collapse under gcc's optimizer. Oh well.
+ */
+static inline void set_io_port_base(unsigned long base)
+{
+ * (unsigned long *) &mips_io_port_base = base;
+ barrier();
+}
/*
* Thanks to James van Artsdalen for a better timing-fix than
#define ioremap_nocache(offset, size) \
__ioremap_mode((offset), (size), _CACHE_UNCACHED)
+/*
+ * ioremap_cachable - map bus memory into CPU space
+ * @offset: bus address of the memory
+ * @size: size of the resource to map
+ *
+ * ioremap_nocache performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * This version of ioremap ensures that the memory is marked cachable by
+ * the CPU. Also enables full write-combining. Useful for some
+ * memory-like regions on I/O busses.
+ */
+#define ioremap_cachable(offset, size) \
+ __ioremap_mode((offset), (size), PAGE_CACHABLE_DEFAULT)
+
/*
* These two are MIPS specific ioremap variant. ioremap_cacheable_cow
* requests a cachable mapping, ioremap_uncached_accelerated requests a
\
static inline void blast_##pfx##cache##lsize##_page_indexed(unsigned long page) \
{ \
- unsigned long start = page; \
+ unsigned long indexmask = current_cpu_data.desc.waysize - 1; \
+ unsigned long start = INDEX_BASE + (page & indexmask); \
unsigned long end = start + PAGE_SIZE; \
unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit; \
unsigned long ws_end = current_cpu_data.desc.ways << \
extern unsigned int periph_rev;
extern unsigned int zbbus_mhz;
+extern void sb1250_hpt_setup(void);
extern void sb1250_time_init(void);
-extern unsigned long sb1250_gettimeoffset(void);
extern void sb1250_mask_irq(int cpu, int irq);
extern void sb1250_unmask_irq(int cpu, int irq);
extern void sb1250_smp_finish(void);
*/
#define V_SCD_TIMER_FREQ 1000000
+#define V_SCD_TIMER_WIDTH 23
#define S_SCD_TIMER_INIT 0
-#define M_SCD_TIMER_INIT _SB_MAKEMASK(20,S_SCD_TIMER_INIT)
+#define M_SCD_TIMER_INIT _SB_MAKEMASK(V_SCD_TIMER_WIDTH,S_SCD_TIMER_INIT)
#define V_SCD_TIMER_INIT(x) _SB_MAKEVALUE(x,S_SCD_TIMER_INIT)
#define G_SCD_TIMER_INIT(x) _SB_GETVALUE(x,S_SCD_TIMER_INIT,M_SCD_TIMER_INIT)
#define S_SCD_TIMER_CNT 0
-#define M_SCD_TIMER_CNT _SB_MAKEMASK(20,S_SCD_TIMER_CNT)
+#define M_SCD_TIMER_CNT _SB_MAKEMASK(V_SCD_TIMER_WIDTH,S_SCD_TIMER_CNT)
#define V_SCD_TIMER_CNT(x) _SB_MAKEVALUE(x,S_SCD_TIMER_CNT)
#define G_SCD_TIMER_CNT(x) _SB_GETVALUE(x,S_SCD_TIMER_CNT,M_SCD_TIMER_CNT)
return cpus_weight(cpu_callout_map);
}
-/* These are defined by the board-specific code. */
+/*
+ * These are defined by the board-specific code.
+ */
/*
* Cause the function described by call_data to be executed on the passed
extern void prom_init_secondary(void);
/*
- * Detect available CPUs, populate phys_cpu_present_map before smp_init
+ * Populate cpu_possible_map before smp_init, called from setup_arch.
+ */
+extern void plat_smp_setup(void);
+
+/*
+ * Called after init_IRQ but before __cpu_up.
*/
extern void prom_prepare_cpus(unsigned int max_cpus);
#endif
"2: \n"
" .set pop \n"
- : "=&r" (retval), "=m" (*m)
+ : "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else if (cpu_has_llsc) {
#endif
"2: \n"
" .set pop \n"
- : "=&r" (retval), "=m" (*m)
+ : "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else {
#endif
"2: \n"
" .set pop \n"
- : "=&r" (retval), "=m" (*m)
+ : "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else if (cpu_has_llsc) {
#endif
"2: \n"
" .set pop \n"
- : "=&r" (retval), "=m" (*m)
+ : "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else {
* <linux/vt_buffer.h> has already done the right job for us.
*/
+#undef scr_writew
+#undef scr_readw
+
static inline void scr_writew(u16 val, volatile u16 *addr)
{
*addr = cpu_to_le16(val);
#define PPC_FEATURE_POWER5_PLUS 0x00020000
#define PPC_FEATURE_CELL 0x00010000
#define PPC_FEATURE_BOOKE 0x00008000
+#define PPC_FEATURE_SMT 0x00004000
+#define PPC_FEATURE_ICACHE_SNOOP 0x00002000
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
#include <linux/string.h>
struct pci_dev;
+struct pci_bus;
struct device_node;
#ifdef CONFIG_EEH
* to finish the eeh setup for this device.
*/
void eeh_add_device_early(struct device_node *);
+void eeh_add_device_late(struct pci_dev *dev);
void eeh_add_device_tree_early(struct device_node *);
-void eeh_add_device_late(struct pci_dev *);
+void eeh_add_device_tree_late(struct pci_bus *);
/**
* eeh_remove_device - undo EEH setup for the indicated pci device
static inline void eeh_add_device_tree_early(struct device_node *dn) { }
+static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
+
static inline void eeh_remove_bus_device(struct pci_dev *dev) { }
#define EEH_POSSIBLE_ERROR(val, type) (0)
#define EEH_IO_ERROR_VALUE(size) (-1UL)
"mfxer %0\n"
"std %0, 296(%2)\n"
: "=&r" (tmp1), "=&r" (tmp2)
- : "b" (newregs));
+ : "b" (newregs)
+ : "memory");
}
}
#else
(((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)))
#define pud_ERROR(e) \
- printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pud_val(e))
+ printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))
void pci_devs_phb_init(void);
void pci_devs_phb_init_dynamic(struct pci_controller *phb);
+int setup_phb(struct device_node *dev, struct pci_controller *phb);
void __devinit scan_phb(struct pci_controller *hose);
/* From rtas_pci.h */
int preempt_count; /* 0 => preemptable,
<0 => BUG */
struct restart_block restart_block;
- void __user *nvgprs_frame;
/* low level flags - has atomic operations done on it */
unsigned long flags ____cacheline_aligned_in_smp;
};
#define TIF_MEMDIE 10
#define TIF_SECCOMP 11 /* secure computing */
#define TIF_RESTOREALL 12 /* Restore all regs (implies NOERROR) */
-#define TIF_SAVE_NVGPRS 13 /* Save r14-r31 in signal frame */
#define TIF_NOERROR 14 /* Force successful syscall return */
#define TIF_RESTORE_SIGMASK 15 /* Restore signal mask in do_signal */
#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
#define _TIF_RESTOREALL (1<<TIF_RESTOREALL)
-#define _TIF_SAVE_NVGPRS (1<<TIF_SAVE_NVGPRS)
#define _TIF_NOERROR (1<<TIF_NOERROR)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
#define _TIF_USER_WORK_MASK (_TIF_NOTIFY_RESUME | _TIF_SIGPENDING | \
- _TIF_NEED_RESCHED | _TIF_RESTOREALL | \
- _TIF_RESTORE_SIGMASK)
-#define _TIF_PERSYSCALL_MASK (_TIF_RESTOREALL|_TIF_NOERROR|_TIF_SAVE_NVGPRS)
+ _TIF_NEED_RESCHED | _TIF_RESTORE_SIGMASK)
+#define _TIF_PERSYSCALL_MASK (_TIF_RESTOREALL|_TIF_NOERROR)
#endif /* __KERNEL__ */
extern void account_vtime(struct task_struct *);
extern void account_tick_vtime(struct task_struct *);
extern void account_system_vtime(struct task_struct *);
+#else
+#define account_vtime(x) do { /* empty */ } while (0)
#endif
#define finish_arch_switch(prev) do { \
"4: ba 3b\n" \
" mov %5, %0\n" \
" .previous\n" \
- " .section __ex_table,#alloc\n" \
+ " .section __ex_table,\"a\"\n" \
" .align 4\n" \
" .word 1b, 4b\n" \
" .word 2b, 4b\n" \
"b 2b\n\t" \
" mov %3, %0\n\n\t" \
".previous\n\t" \
- ".section __ex_table,#alloc\n\t" \
+ ".section __ex_table,\"a\"\n\t" \
".align 4\n\t" \
".word 1b, 3b\n\t" \
".previous\n\n\t" \
__asm__ __volatile__( \
"/* Put user asm ret, inline. */\n" \
"1:\t" "st"#size "a %1, [%2] %%asi\n\n\t" \
- ".section __ex_table,#alloc\n\t" \
+ ".section __ex_table,\"a\"\n\t" \
".align 4\n\t" \
".word 1b, __ret_efault\n\n\t" \
".previous\n\n\t" \
"ret\n\t" \
" restore %%g0, %3, %%o0\n\n\t" \
".previous\n\t" \
- ".section __ex_table,#alloc\n\t" \
+ ".section __ex_table,\"a\"\n\t" \
".align 4\n\t" \
".word 1b, 3b\n\n\t" \
".previous\n\n\t" \
"b 2b\n\t" \
" mov %3, %0\n\n\t" \
".previous\n\t" \
- ".section __ex_table,#alloc\n\t" \
+ ".section __ex_table,\"a\"\n\t" \
".align 4\n\t" \
".word 1b, 3b\n\n\t" \
".previous\n\t" \
__asm__ __volatile__( \
"/* Get user asm ret, inline. */\n" \
"1:\t" "ld"#size "a [%1] %%asi, %0\n\n\t" \
- ".section __ex_table,#alloc\n\t" \
+ ".section __ex_table,\"a\"\n\t" \
".align 4\n\t" \
".word 1b,__ret_efault\n\n\t" \
".previous\n\t" \
"ret\n\t" \
" restore %%g0, %2, %%o0\n\n\t" \
".previous\n\t" \
- ".section __ex_table,#alloc\n\t" \
+ ".section __ex_table,\"a\"\n\t" \
".align 4\n\t" \
".word 1b, 3b\n\n\t" \
".previous\n\t" \
extern int acpi_skip_timer_override;
-extern int unsync_tsc_on_multicluster;
-
-static inline int acpi_madt_oem_check(char *oem, char *productid)
-{
- /* Copied from i386. Probably has too many entries. */
- if (!strncmp(oem, "IBM ENSW", 8) &&
- (!strncmp(productid, "VIGIL SMP", 9)
- || !strncmp(productid, "EXA", 3)
- || !strncmp(productid, "RUTHLESS SMP", 12))) {
- unsync_tsc_on_multicluster = 1;
- }
- return 0;
-}
-
#endif /*__KERNEL__*/
#endif /*_ASM_ACPI_H*/
COMPATIBLE_IOCTL(MEMUNLOCK)
COMPATIBLE_IOCTL(MEMGETREGIONCOUNT)
COMPATIBLE_IOCTL(MEMGETREGIONINFO)
+COMPATIBLE_IOCTL(MEMGETBADBLOCK)
+COMPATIBLE_IOCTL(MEMSETBADBLOCK)
/* NBD */
ULONG_IOCTL(NBD_SET_SOCK)
ULONG_IOCTL(NBD_SET_BLKSIZE)
extern int get_unused_fd(void);
extern void FASTCALL(put_unused_fd(unsigned int fd));
struct kmem_cache;
-extern void filp_ctor(void * objp, struct kmem_cache *cachep, unsigned long cflags);
-extern void filp_dtor(void * objp, struct kmem_cache *cachep, unsigned long dflags);
extern struct file ** alloc_fd_array(int);
extern void free_fd_array(struct file **, int);
int max_files; /* tunable */
};
extern struct files_stat_struct files_stat;
+extern int get_max_files(void);
struct inodes_stat_t {
int nr_inodes;
extern struct file_operations read_fifo_fops;
extern struct file_operations write_fifo_fops;
extern struct file_operations rdwr_fifo_fops;
-extern struct file_operations read_pipe_fops;
-extern struct file_operations write_pipe_fops;
-extern struct file_operations rdwr_pipe_fops;
extern int fs_may_remount_ro(struct super_block *);
extern int page_readlink(struct dentry *, char __user *, int);
extern void *page_follow_link_light(struct dentry *, struct nameidata *);
extern void page_put_link(struct dentry *, struct nameidata *, void *);
+extern int __page_symlink(struct inode *inode, const char *symname, int len,
+ gfp_t gfp_mask);
extern int page_symlink(struct inode *inode, const char *symname, int len);
extern struct inode_operations page_symlink_inode_operations;
extern int generic_readlink(struct dentry *, char __user *, int);
void page_alloc_init(void);
#ifdef CONFIG_NUMA
-void drain_remote_pages(void);
+void drain_node_pages(int node);
#else
-static inline void drain_remote_pages(void) { };
+static inline void drain_node_pages(int node) { };
#endif
#endif /* __LINUX_GFP_H */
CACHE(32768)
CACHE(65536)
CACHE(131072)
-#ifndef CONFIG_MMU
+#if (NR_CPUS > 512) || (MAX_NUMNODES > 256) || !defined(CONFIG_MMU)
CACHE(262144)
+#endif
+#ifndef CONFIG_MMU
CACHE(524288)
CACHE(1048576)
#ifdef CONFIG_LARGE_ALLOCS
#include <linux/mmzone.h>
#include <linux/notifier.h>
+struct page;
+struct zone;
+struct pglist_data;
+
#ifdef CONFIG_MEMORY_HOTPLUG
/*
* pgdat resizing functions
#define EBT_LOG_IP 0x01 /* if the frame is made by ip, log the ip information */
#define EBT_LOG_ARP 0x02
+#define EBT_LOG_NFLOG 0x04
#define EBT_LOG_MASK (EBT_LOG_IP | EBT_LOG_ARP)
#define EBT_LOG_PREFIX_SIZE 30
#define EBT_LOG_WATCHER "log"
#define IPT_LOG_TCPOPT 0x02 /* Log TCP options */
#define IPT_LOG_IPOPT 0x04 /* Log IP options */
#define IPT_LOG_UID 0x08 /* Log UID owning local socket */
-#define IPT_LOG_MASK 0x0f
+#define IPT_LOG_NFLOG 0x10 /* Log using nf_log backend */
+#define IPT_LOG_MASK 0x1f
struct ipt_log_info {
unsigned char level;
#define IP6T_LOG_TCPOPT 0x02 /* Log TCP options */
#define IP6T_LOG_IPOPT 0x04 /* Log IP options */
#define IP6T_LOG_UID 0x08 /* Log UID owning local socket */
-#define IP6T_LOG_MASK 0x0f
+#define IP6T_LOG_NFLOG 0x10 /* Log using nf_log backend */
+#define IP6T_LOG_MASK 0x1f
struct ip6t_log_info {
unsigned char level;
#define PCI_DEVICE_ID_SERVERWORKS_HE 0x0008
#define PCI_DEVICE_ID_SERVERWORKS_LE 0x0009
#define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017
+#define PCI_DEVICE_ID_SERVERWORKS_EPB 0x0103
#define PCI_DEVICE_ID_SERVERWORKS_OSB4 0x0200
#define PCI_DEVICE_ID_SERVERWORKS_CSB5 0x0201
#define PCI_DEVICE_ID_SERVERWORKS_CSB6 0x0203
#define PCI_DEVICE_ID_CCD_B00B 0xb00b
#define PCI_DEVICE_ID_CCD_B00C 0xb00c
#define PCI_DEVICE_ID_CCD_B100 0xb100
+#define PCI_DEVICE_ID_CCD_B700 0xb700
+#define PCI_DEVICE_ID_CCD_B701 0xb701
#define PCI_VENDOR_ID_EXAR 0x13a8
#define PCI_DEVICE_ID_EXAR_XR17C152 0x0152
}
void percpu_counter_mod(struct percpu_counter *fbc, long amount);
+long percpu_counter_sum(struct percpu_counter *fbc);
static inline long percpu_counter_read(struct percpu_counter *fbc)
{
return fbc->count;
}
+static inline long percpu_counter_sum(struct percpu_counter *fbc)
+{
+ return percpu_counter_read_positive(fbc);
+}
+
#endif /* CONFIG_SMP */
static inline void percpu_counter_inc(struct percpu_counter *fbc)
long batch; /* Batch # for current RCU batch */
struct rcu_head *nxtlist;
struct rcu_head **nxttail;
- long count; /* # of queued items */
+ long qlen; /* # of queued callbacks */
struct rcu_head *curlist;
struct rcu_head **curtail;
struct rcu_head *donelist;
struct rcu_head **donetail;
+ long blimit; /* Upper limit on a processed batch */
int cpu;
struct rcu_head barrier;
+#ifdef CONFIG_SMP
+ long last_rs_qlen; /* qlen during the last resched */
+#endif
};
DECLARE_PER_CPU(struct rcu_data, rcu_data);
int de_entrylen;
int de_namelen;
char *de_name;
- char *de_gen_number_bit_string;
+ unsigned long *de_gen_number_bit_string;
__u32 de_dir_id;
__u32 de_objectid;
unsigned long addr, unsigned long len,
unsigned long pgoff, unsigned long flags);
void (*unmap_area) (struct mm_struct *mm, unsigned long addr);
- unsigned long mmap_base; /* base of mmap area */
- unsigned long cached_hole_size; /* if non-zero, the largest hole below free_area_cache */
+ unsigned long mmap_base; /* base of mmap area */
+ unsigned long task_size; /* size of task vm space */
+ unsigned long cached_hole_size; /* if non-zero, the largest hole below free_area_cache */
unsigned long free_area_cache; /* first hole of size cached_hole_size or larger */
pgd_t * pgd;
atomic_t mm_users; /* How many users with user space? */
}
extern void free_task(struct task_struct *tsk);
-extern void __put_task_struct(struct task_struct *tsk);
#define get_task_struct(tsk) do { atomic_inc(&(tsk)->usage); } while(0)
extern void __put_task_struct_cb(struct rcu_head *rhp);
KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */
KERN_SPIN_RETRY=70, /* int: number of spinlock retries */
KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */
+ KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */
};
enum {
AX25_PROTO_STD_SIMPLEX,
AX25_PROTO_STD_DUPLEX,
+#ifdef CONFIG_AX25_DAMA_SLAVE
AX25_PROTO_DAMA_SLAVE,
- AX25_PROTO_DAMA_MASTER
+#ifdef CONFIG_AX25_DAMA_MASTER
+ AX25_PROTO_DAMA_MASTER,
+#define AX25_PROTO_MAX AX25_PROTO_DAMA_MASTER
+#endif
+#endif
+ __AX25_PROTO_MAX,
+ AX25_PROTO_MAX = __AX25_PROTO_MAX -1
};
enum {
rc = __condition; \
if (!rc) { \
*(__timeo) = schedule_timeout(*(__timeo)); \
- rc = __condition; \
} \
lock_sock(__sk); \
+ rc = __condition; \
rc; \
})
int (*init_state)(struct xfrm_state *x);
void (*destructor)(struct xfrm_state *);
int (*input)(struct xfrm_state *, struct xfrm_decap_state *, struct sk_buff *skb);
- int (*post_input)(struct xfrm_state *, struct xfrm_decap_state *, struct sk_buff *skb);
int (*output)(struct xfrm_state *, struct sk_buff *pskb);
/* Estimate maximal size of result of transformation of a dgram */
u32 (*get_max_size)(struct xfrm_state *, int size);
.prod_id = { (v1), (v2), (v3), (v4) }, \
.prod_id_hash = { (vh1), (vh2), (vh3), (vh4) }, }
+#define PCMCIA_DEVICE_MANF_CARD_PROD_ID1(manf, card, v1, vh1) { \
+ .match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \
+ PCMCIA_DEV_ID_MATCH_CARD_ID| \
+ PCMCIA_DEV_ID_MATCH_PROD_ID1, \
+ .manf_id = (manf), \
+ .card_id = (card), \
+ .prod_id = { (v1), NULL, NULL, NULL }, \
+ .prod_id_hash = { (vh1), 0, 0, 0 }, }
+
/* multi-function devices */
}
EXPORT_SYMBOL(free_task);
-void __put_task_struct(struct task_struct *tsk)
+void __put_task_struct_cb(struct rcu_head *rhp)
{
+ struct task_struct *tsk = container_of(rhp, struct task_struct, rcu);
+
WARN_ON(!(tsk->exit_state & (EXIT_DEAD | EXIT_ZOMBIE)));
WARN_ON(atomic_read(&tsk->usage));
WARN_ON(tsk == current);
*/
p->clear_child_tid = (clone_flags & CLONE_CHILD_CLEARTID) ? child_tidptr: NULL;
+ /*
+ * sigaltstack should be cleared when sharing the same VM
+ */
+ if ((clone_flags & (CLONE_VM|CLONE_VFORK)) == CLONE_VM)
+ p->sas_ss_sp = p->sas_ss_size = 0;
+
/*
* Syscall tracing should be turned off in the child regardless
* of CLONE_PTRACE.
if ((unshare_flags & CLONE_VM) &&
(mm && atomic_read(&mm->mm_users) > 1)) {
- *new_mmp = dup_mm(current);
- if (!*new_mmp)
- return -ENOMEM;
+ return -EINVAL;
}
return 0;
if (new_sigh) {
sigh = current->sighand;
- current->sighand = new_sigh;
+ rcu_assign_pointer(current->sighand, new_sigh);
new_sigh = sigh;
}
hrtimer_forward(&timr->it.real.timer,
timr->it.real.interval);
ret = HRTIMER_RESTART;
+ ++timr->it_requeue_pending;
}
}
/* Fake initialization required by compiler */
static DEFINE_PER_CPU(struct tasklet_struct, rcu_tasklet) = {NULL};
-static int maxbatch = 10000;
+static int blimit = 10;
+static int qhimark = 10000;
+static int qlowmark = 100;
+#ifdef CONFIG_SMP
+static int rsinterval = 1000;
+#endif
+
+static atomic_t rcu_barrier_cpu_count;
+static struct semaphore rcu_barrier_sema;
+static struct completion rcu_barrier_completion;
+
+#ifdef CONFIG_SMP
+static void force_quiescent_state(struct rcu_data *rdp,
+ struct rcu_ctrlblk *rcp)
+{
+ int cpu;
+ cpumask_t cpumask;
+ set_need_resched();
+ if (unlikely(rdp->qlen - rdp->last_rs_qlen > rsinterval)) {
+ rdp->last_rs_qlen = rdp->qlen;
+ /*
+ * Don't send IPI to itself. With irqs disabled,
+ * rdp->cpu is the current cpu.
+ */
+ cpumask = rcp->cpumask;
+ cpu_clear(rdp->cpu, cpumask);
+ for_each_cpu_mask(cpu, cpumask)
+ smp_send_reschedule(cpu);
+ }
+}
+#else
+static inline void force_quiescent_state(struct rcu_data *rdp,
+ struct rcu_ctrlblk *rcp)
+{
+ set_need_resched();
+}
+#endif
/**
* call_rcu - Queue an RCU callback for invocation after a grace period.
rdp = &__get_cpu_var(rcu_data);
*rdp->nxttail = head;
rdp->nxttail = &head->next;
-
- if (unlikely(++rdp->count > 10000))
- set_need_resched();
-
+ if (unlikely(++rdp->qlen > qhimark)) {
+ rdp->blimit = INT_MAX;
+ force_quiescent_state(rdp, &rcu_ctrlblk);
+ }
local_irq_restore(flags);
}
-static atomic_t rcu_barrier_cpu_count;
-static struct semaphore rcu_barrier_sema;
-static struct completion rcu_barrier_completion;
-
/**
* call_rcu_bh - Queue an RCU for invocation after a quicker grace period.
* @head: structure to be used for queueing the RCU updates.
rdp = &__get_cpu_var(rcu_bh_data);
*rdp->nxttail = head;
rdp->nxttail = &head->next;
- rdp->count++;
-/*
- * Should we directly call rcu_do_batch() here ?
- * if (unlikely(rdp->count > 10000))
- * rcu_do_batch(rdp);
- */
+
+ if (unlikely(++rdp->qlen > qhimark)) {
+ rdp->blimit = INT_MAX;
+ force_quiescent_state(rdp, &rcu_bh_ctrlblk);
+ }
+
local_irq_restore(flags);
}
next = rdp->donelist = list->next;
list->func(list);
list = next;
- rdp->count--;
- if (++count >= maxbatch)
+ rdp->qlen--;
+ if (++count >= rdp->blimit)
break;
}
+ if (rdp->blimit == INT_MAX && rdp->qlen <= qlowmark)
+ rdp->blimit = blimit;
if (!rdp->donelist)
rdp->donetail = &rdp->donelist;
else
rdp->quiescbatch = rcp->completed;
rdp->qs_pending = 0;
rdp->cpu = cpu;
+ rdp->blimit = blimit;
}
static void __devinit rcu_online_cpu(int cpu)
synchronize_rcu();
}
-module_param(maxbatch, int, 0);
+module_param(blimit, int, 0);
+module_param(qhimark, int, 0);
+module_param(qlowmark, int, 0);
+#ifdef CONFIG_SMP
+module_param(rsinterval, int, 0);
+#endif
EXPORT_SYMBOL_GPL(rcu_batches_completed);
EXPORT_SYMBOL(call_rcu); /* WARNING: GPL-only in April 2006. */
EXPORT_SYMBOL(call_rcu_bh); /* WARNING: GPL-only in April 2006. */
#define task_hot(p, now, sd) ((long long) ((now) - (p)->last_ran) \
< (long long) (sd)->cache_hot_time)
-void __put_task_struct_cb(struct rcu_head *rhp)
-{
- __put_task_struct(container_of(rhp, struct task_struct, rcu));
-}
-
-EXPORT_SYMBOL_GPL(__put_task_struct_cb);
-
/*
* These are the runqueue data structures:
*/
*/
if (unlikely(preempt_count()))
return;
+ if (unlikely(system_state != SYSTEM_RUNNING))
+ return;
do {
add_preempt_count(PREEMPT_ACTIVE);
schedule();
runqueue_t *rq = cpu_rq(cpu);
unsigned long flags;
+ idle->timestamp = sched_clock();
idle->sleep_avg = 0;
idle->array = NULL;
idle->prio = MAX_PRIO;
#include <asm/uaccess.h>
#include <asm/processor.h>
+extern int proc_nr_files(ctl_table *table, int write, struct file *filp,
+ void __user *buffer, size_t *lenp, loff_t *ppos);
+
#if defined(CONFIG_SYSCTL)
/* External variables not in a header file. */
extern int acct_parm[];
#endif
+#ifdef CONFIG_IA64
+extern int no_unaligned_warning;
+#endif
+
static int parse_table(int __user *, int, void __user *, size_t __user *, void __user *, size_t,
ctl_table *, void **);
static int proc_doutsstring(ctl_table *table, int write, struct file *filp,
.data = &acpi_video_flags,
.maxlen = sizeof (unsigned long),
.mode = 0644,
+ .proc_handler = &proc_doulongvec_minmax,
+ },
+#endif
+#ifdef CONFIG_IA64
+ {
+ .ctl_name = KERN_IA64_UNALIGNED,
+ .procname = "ignore-unaligned-usertrap",
+ .data = &no_unaligned_warning,
+ .maxlen = sizeof (int),
+ .mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
.data = &files_stat,
.maxlen = 3*sizeof(int),
.mode = 0444,
- .proc_handler = &proc_dointvec,
+ .proc_handler = &proc_nr_files,
},
{
.ctl_name = FS_MAXFILE,
tvec_base_t *base;
struct list_head *list;
struct timer_list *nte;
- unsigned long expires, hr_expires = MAX_JIFFY_OFFSET;
+ unsigned long expires;
+ unsigned long hr_expires = MAX_JIFFY_OFFSET;
ktime_t hr_delta;
tvec_t *varray[4];
int i, j;
void do_timer(struct pt_regs *regs)
{
jiffies_64++;
+ /* prevent loading jiffies before storing new jiffies_64 value. */
+ barrier();
update_times();
softlockup_tick(regs);
}
#ifdef CONFIG_TIME_INTERPOLATION
-struct time_interpolator *time_interpolator;
-static struct time_interpolator *time_interpolator_list;
+struct time_interpolator *time_interpolator __read_mostly;
+static struct time_interpolator *time_interpolator_list __read_mostly;
static DEFINE_SPINLOCK(time_interpolator_lock);
static inline u64 time_interpolator_get_cycles(unsigned int src)
return x();
case TIME_SOURCE_MMIO64 :
- return readq((void __iomem *) time_interpolator->addr);
+ return readq_relaxed((void __iomem *)time_interpolator->addr);
case TIME_SOURCE_MMIO32 :
- return readl((void __iomem *) time_interpolator->addr);
+ return readl_relaxed((void __iomem *)time_interpolator->addr);
default: return get_cycles();
}
(*zap_work)--;
continue;
}
+
+ (*zap_work) -= PAGE_SIZE;
+
if (pte_present(ptent)) {
struct page *page;
- (*zap_work) -= PAGE_SIZE;
-
page = vm_normal_page(vma, addr, ptent);
if (unlikely(details) && page) {
/*
onlined_pages++;
}
zone->present_pages += onlined_pages;
+ zone->zone_pgdat->node_present_pages += onlined_pages;
setup_per_zone_pages_min();
return policy;
}
-static void gather_stats(struct page *, void *);
+static void gather_stats(struct page *, void *, int pte_dirty);
static void migrate_page_add(struct page *page, struct list_head *pagelist,
unsigned long flags);
continue;
if (flags & MPOL_MF_STATS)
- gather_stats(page, private);
+ gather_stats(page, private, pte_dirty(*pte));
else if (flags & (MPOL_MF_MOVE | MPOL_MF_MOVE_ALL))
migrate_page_add(page, private, flags);
else
int err;
struct vm_area_struct *first, *vma, *prev;
- /* Clear the LRU lists so pages can be isolated */
- if (flags & (MPOL_MF_MOVE | MPOL_MF_MOVE_ALL))
+ if (flags & (MPOL_MF_MOVE | MPOL_MF_MOVE_ALL)) {
+ /* Must have swap device for migration */
+ if (nr_swap_pages <= 0)
+ return ERR_PTR(-ENODEV);
+
+ /*
+ * Clear the LRU lists so pages can be isolated.
+ * Note that pages may be moved off the LRU after we have
+ * drained them. Those pages will fail to migrate like other
+ * pages that may be busy.
+ */
lru_add_drain_all();
+ }
first = find_vma(mm, start);
if (!first)
MPOL_MF_MOVE | MPOL_MF_MOVE_ALL))
|| mode > MPOL_MAX)
return -EINVAL;
- if ((flags & MPOL_MF_MOVE_ALL) && !capable(CAP_SYS_RESOURCE))
+ if ((flags & MPOL_MF_MOVE_ALL) && !capable(CAP_SYS_NICE))
return -EPERM;
if (start & ~PAGE_MASK)
*/
if ((current->euid != task->suid) && (current->euid != task->uid) &&
(current->uid != task->suid) && (current->uid != task->uid) &&
- !capable(CAP_SYS_ADMIN)) {
+ !capable(CAP_SYS_NICE)) {
err = -EPERM;
goto out;
}
task_nodes = cpuset_mems_allowed(task);
/* Is the user allowed to access the target nodes? */
- if (!nodes_subset(new, task_nodes) && !capable(CAP_SYS_ADMIN)) {
+ if (!nodes_subset(new, task_nodes) && !capable(CAP_SYS_NICE)) {
err = -EPERM;
goto out;
}
- err = do_migrate_pages(mm, &old, &new, MPOL_MF_MOVE);
+ err = do_migrate_pages(mm, &old, &new,
+ capable(CAP_SYS_NICE) ? MPOL_MF_MOVE_ALL : MPOL_MF_MOVE);
out:
mmput(mm);
return err;
struct numa_maps {
unsigned long pages;
unsigned long anon;
- unsigned long mapped;
+ unsigned long active;
+ unsigned long writeback;
unsigned long mapcount_max;
+ unsigned long dirty;
+ unsigned long swapcache;
unsigned long node[MAX_NUMNODES];
};
-static void gather_stats(struct page *page, void *private)
+static void gather_stats(struct page *page, void *private, int pte_dirty)
{
struct numa_maps *md = private;
int count = page_mapcount(page);
- if (count)
- md->mapped++;
+ md->pages++;
+ if (pte_dirty || PageDirty(page))
+ md->dirty++;
- if (count > md->mapcount_max)
- md->mapcount_max = count;
+ if (PageSwapCache(page))
+ md->swapcache++;
- md->pages++;
+ if (PageActive(page))
+ md->active++;
+
+ if (PageWriteback(page))
+ md->writeback++;
if (PageAnon(page))
md->anon++;
+ if (count > md->mapcount_max)
+ md->mapcount_max = count;
+
md->node[page_to_nid(page)]++;
cond_resched();
}
+#ifdef CONFIG_HUGETLB_PAGE
+static void check_huge_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end,
+ struct numa_maps *md)
+{
+ unsigned long addr;
+ struct page *page;
+
+ for (addr = start; addr < end; addr += HPAGE_SIZE) {
+ pte_t *ptep = huge_pte_offset(vma->vm_mm, addr & HPAGE_MASK);
+ pte_t pte;
+
+ if (!ptep)
+ continue;
+
+ pte = *ptep;
+ if (pte_none(pte))
+ continue;
+
+ page = pte_page(pte);
+ if (!page)
+ continue;
+
+ gather_stats(page, md, pte_dirty(*ptep));
+ }
+}
+#else
+static inline void check_huge_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end,
+ struct numa_maps *md)
+{
+}
+#endif
+
int show_numa_map(struct seq_file *m, void *v)
{
struct task_struct *task = m->private;
struct vm_area_struct *vma = v;
struct numa_maps *md;
+ struct file *file = vma->vm_file;
+ struct mm_struct *mm = vma->vm_mm;
int n;
char buffer[50];
- if (!vma->vm_mm)
+ if (!mm)
return 0;
md = kzalloc(sizeof(struct numa_maps), GFP_KERNEL);
if (!md)
return 0;
- check_pgd_range(vma, vma->vm_start, vma->vm_end,
- &node_online_map, MPOL_MF_STATS, md);
+ mpol_to_str(buffer, sizeof(buffer),
+ get_vma_policy(task, vma, vma->vm_start));
- if (md->pages) {
- mpol_to_str(buffer, sizeof(buffer),
- get_vma_policy(task, vma, vma->vm_start));
+ seq_printf(m, "%08lx %s", vma->vm_start, buffer);
- seq_printf(m, "%08lx %s pages=%lu mapped=%lu maxref=%lu",
- vma->vm_start, buffer, md->pages,
- md->mapped, md->mapcount_max);
+ if (file) {
+ seq_printf(m, " file=");
+ seq_path(m, file->f_vfsmnt, file->f_dentry, "\n\t= ");
+ } else if (vma->vm_start <= mm->brk && vma->vm_end >= mm->start_brk) {
+ seq_printf(m, " heap");
+ } else if (vma->vm_start <= mm->start_stack &&
+ vma->vm_end >= mm->start_stack) {
+ seq_printf(m, " stack");
+ }
- if (md->anon)
- seq_printf(m," anon=%lu",md->anon);
+ if (is_vm_hugetlb_page(vma)) {
+ check_huge_range(vma, vma->vm_start, vma->vm_end, md);
+ seq_printf(m, " huge");
+ } else {
+ check_pgd_range(vma, vma->vm_start, vma->vm_end,
+ &node_online_map, MPOL_MF_STATS, md);
+ }
- for_each_online_node(n)
- if (md->node[n])
- seq_printf(m, " N%d=%lu", n, md->node[n]);
+ if (!md->pages)
+ goto out;
- seq_putc(m, '\n');
- }
+ if (md->anon)
+ seq_printf(m," anon=%lu",md->anon);
+
+ if (md->dirty)
+ seq_printf(m," dirty=%lu",md->dirty);
+
+ if (md->pages != md->anon && md->pages != md->dirty)
+ seq_printf(m, " mapped=%lu", md->pages);
+
+ if (md->mapcount_max > 1)
+ seq_printf(m, " mapmax=%lu", md->mapcount_max);
+
+ if (md->swapcache)
+ seq_printf(m," swapcache=%lu", md->swapcache);
+
+ if (md->active < md->pages && !is_vm_hugetlb_page(vma))
+ seq_printf(m," active=%lu", md->active);
+
+ if (md->writeback)
+ seq_printf(m," writeback=%lu", md->writeback);
+
+ for_each_online_node(n)
+ if (md->node[n])
+ seq_printf(m, " N%d=%lu", n, md->node[n]);
+out:
+ seq_putc(m, '\n');
kfree(md);
if (m->count < m->size)
struct vm_operations_struct generic_file_vm_ops = {
};
-EXPORT_SYMBOL(vmalloc);
EXPORT_SYMBOL(vfree);
EXPORT_SYMBOL(vmalloc_to_page);
EXPORT_SYMBOL(vmalloc_32);
{
return __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL);
}
+EXPORT_SYMBOL(vmalloc);
+
+void *vmalloc_node(unsigned long size, int node)
+{
+ return vmalloc(size);
+}
+EXPORT_SYMBOL(vmalloc_node);
/*
* vmalloc_32 - allocate virtually continguos memory (32bit addressable)
{
struct mm_struct *mm = NULL;
task_t *p;
- unsigned long points;
+ unsigned long points = 0;
if (printk_ratelimit()) {
printk("oom-killer: gfp_mask=0x%x, order=%d\n",
}
out:
+ read_unlock(&tasklist_lock);
cpuset_unlock();
if (mm)
mmput(mm);
* retry to allocate memory unless "p" is current
*/
if (!test_thread_flag(TIF_MEMDIE))
- schedule_timeout_interruptible(1);
+ schedule_timeout_uninterruptible(1);
}
}
#ifdef CONFIG_NUMA
-/* Called from the slab reaper to drain remote pagesets */
-void drain_remote_pages(void)
+/*
+ * Called from the slab reaper to drain pagesets on a particular node that
+ * belong to the currently executing processor.
+ */
+void drain_node_pages(int nodeid)
{
- struct zone *zone;
- int i;
+ int i, z;
unsigned long flags;
local_irq_save(flags);
- for_each_zone(zone) {
+ for (z = 0; z < MAX_NR_ZONES; z++) {
+ struct zone *zone = NODE_DATA(nodeid)->node_zones + z;
struct per_cpu_pageset *pset;
- /* Do not drain local pagesets */
- if (zone->zone_pgdat->node_id == numa_node_id())
- continue;
-
pset = zone_pcp(zone, smp_processor_id());
for (i = 0; i < ARRAY_SIZE(pset->pcp); i++) {
struct per_cpu_pages *pcp;
* through real pte's pointing to valid pages and then releasing
* the page from the swap cache.
*
- * Must hold page lock on page.
+ * Must hold page lock on page and mmap_sem of one vma that contains
+ * the page.
*/
void remove_from_swap(struct page *page)
{
struct anon_vma *anon_vma;
struct vm_area_struct *vma;
+ unsigned long mapping;
- if (!PageAnon(page) || !PageSwapCache(page))
+ if (!PageSwapCache(page))
return;
- anon_vma = page_lock_anon_vma(page);
- if (!anon_vma)
+ mapping = (unsigned long)page->mapping;
+
+ if (!mapping || (mapping & PAGE_MAPPING_ANON) == 0)
return;
+ /*
+ * We hold the mmap_sem lock. So no need to call page_lock_anon_vma.
+ */
+ anon_vma = (struct anon_vma *) (mapping - PAGE_MAPPING_ANON);
+ spin_lock(&anon_vma->lock);
+
list_for_each_entry(vma, &anon_vma->head, anon_vma_node)
remove_vma_swap(vma, page);
spin_unlock(&anon_vma->lock);
-
delete_from_swap_cache(page);
}
EXPORT_SYMBOL(remove_from_swap);
*/
void page_add_file_rmap(struct page *page)
{
- BUG_ON(PageAnon(page));
- BUG_ON(!pfn_valid(page_to_pfn(page)));
-
if (atomic_inc_and_test(&page->_mapcount))
__inc_page_state(nr_mapped);
}
dump_stack();
}
+#ifdef CONFIG_NUMA
+/*
+ * Special reaping functions for NUMA systems called from cache_reap().
+ * These take care of doing round robin flushing of alien caches (containing
+ * objects freed on different nodes from which they were allocated) and the
+ * flushing of remote pcps by calling drain_node_pages.
+ */
+static DEFINE_PER_CPU(unsigned long, reap_node);
+
+static void init_reap_node(int cpu)
+{
+ int node;
+
+ node = next_node(cpu_to_node(cpu), node_online_map);
+ if (node == MAX_NUMNODES)
+ node = 0;
+
+ __get_cpu_var(reap_node) = node;
+}
+
+static void next_reap_node(void)
+{
+ int node = __get_cpu_var(reap_node);
+
+ /*
+ * Also drain per cpu pages on remote zones
+ */
+ if (node != numa_node_id())
+ drain_node_pages(node);
+
+ node = next_node(node, node_online_map);
+ if (unlikely(node >= MAX_NUMNODES))
+ node = first_node(node_online_map);
+ __get_cpu_var(reap_node) = node;
+}
+
+#else
+#define init_reap_node(cpu) do { } while (0)
+#define next_reap_node(void) do { } while (0)
+#endif
+
/*
* Initiate the reap timer running on the target CPU. We run at around 1 to 2Hz
* via the workqueue/eventd.
* at that time.
*/
if (keventd_up() && reap_work->func == NULL) {
+ init_reap_node(cpu);
INIT_WORK(reap_work, cache_reap, NULL);
schedule_delayed_work_on(cpu, reap_work, HZ + 3 * cpu);
}
}
}
+/*
+ * Called from cache_reap() to regularly drain alien caches round robin.
+ */
+static void reap_alien(struct kmem_cache *cachep, struct kmem_list3 *l3)
+{
+ int node = __get_cpu_var(reap_node);
+
+ if (l3->alien) {
+ struct array_cache *ac = l3->alien[node];
+ if (ac && ac->avail) {
+ spin_lock_irq(&ac->lock);
+ __drain_alien_cache(cachep, ac, node);
+ spin_unlock_irq(&ac->lock);
+ }
+ }
+}
+
static void drain_alien_cache(struct kmem_cache *cachep, struct array_cache **alien)
{
int i = 0;
#else
#define drain_alien_cache(cachep, alien) do { } while (0)
+#define reap_alien(cachep, l3) do { } while (0)
static inline struct array_cache **alloc_alien_cache(int node, int limit)
{
struct cache_sizes *sizes;
struct cache_names *names;
int i;
+ int order;
for (i = 0; i < NUM_INIT_LISTS; i++) {
kmem_list3_init(&initkmem_list3[i]);
cache_cache.buffer_size = ALIGN(cache_cache.buffer_size, cache_line_size());
- cache_estimate(0, cache_cache.buffer_size, cache_line_size(), 0,
- &left_over, &cache_cache.num);
+ for (order = 0; order < MAX_ORDER; order++) {
+ cache_estimate(order, cache_cache.buffer_size,
+ cache_line_size(), 0, &left_over, &cache_cache.num);
+ if (cache_cache.num)
+ break;
+ }
if (!cache_cache.num)
BUG();
-
+ cache_cache.gfporder = order;
cache_cache.colour = left_over / cache_cache.colour_off;
cache_cache.slab_size = ALIGN(cache_cache.num * sizeof(kmem_bufctl_t) +
sizeof(struct slab), cache_line_size());
size_t size, size_t align, unsigned long flags)
{
size_t left_over = 0;
+ int gfporder;
- for (;; cachep->gfporder++) {
+ for (gfporder = 0 ; gfporder <= MAX_GFP_ORDER; gfporder++) {
unsigned int num;
size_t remainder;
- if (cachep->gfporder > MAX_GFP_ORDER) {
- cachep->num = 0;
- break;
- }
-
- cache_estimate(cachep->gfporder, size, align, flags,
- &remainder, &num);
+ cache_estimate(gfporder, size, align, flags, &remainder, &num);
if (!num)
continue;
+
/* More than offslab_limit objects will cause problems */
- if (flags & CFLGS_OFF_SLAB && cachep->num > offslab_limit)
+ if ((flags & CFLGS_OFF_SLAB) && num > offslab_limit)
break;
+ /* Found something acceptable - save it away */
cachep->num = num;
+ cachep->gfporder = gfporder;
left_over = remainder;
+ /*
+ * A VFS-reclaimable slab tends to have most allocations
+ * as GFP_NOFS and we really don't want to have to be allocating
+ * higher-order pages when we are unable to shrink dcache.
+ */
+ if (flags & SLAB_RECLAIM_ACCOUNT)
+ break;
+
/*
* Large number of objects is good, but very large slabs are
* currently bad for the gfp()s.
*/
- if (cachep->gfporder >= slab_break_gfp_order)
+ if (gfporder >= slab_break_gfp_order)
break;
- if ((left_over * 8) <= (PAGE_SIZE << cachep->gfporder))
- /* Acceptable internal fragmentation */
+ /*
+ * Acceptable internal fragmentation?
+ */
+ if ((left_over * 8) <= (PAGE_SIZE << gfporder))
break;
}
return left_over;
size = ALIGN(size, align);
- if ((flags & SLAB_RECLAIM_ACCOUNT) && size <= PAGE_SIZE) {
- /*
- * A VFS-reclaimable slab tends to have most allocations
- * as GFP_NOFS and we really don't want to have to be allocating
- * higher-order pages when we are unable to shrink dcache.
- */
- cachep->gfporder = 0;
- cache_estimate(cachep->gfporder, size, align, flags,
- &left_over, &cachep->num);
- } else
- left_over = calculate_slab_order(cachep, size, align, flags);
+ left_over = calculate_slab_order(cachep, size, align, flags);
if (!cachep->num) {
printk("kmem_cache_create: couldn't create cache %s.\n", name);
"slab: Internal list corruption detected in cache '%s'(%d), slabp %p(%d). Hexdump:\n",
cachep->name, cachep->num, slabp, slabp->inuse);
for (i = 0;
- i < sizeof(slabp) + cachep->num * sizeof(kmem_bufctl_t);
+ i < sizeof(*slabp) + cachep->num * sizeof(kmem_bufctl_t);
i++) {
if ((i % 16) == 0)
printk("\n%03x:", i);
check_irq_on();
l3 = searchp->nodelists[numa_node_id()];
- if (l3->alien)
- drain_alien_cache(searchp, l3->alien);
+ reap_alien(searchp, l3);
spin_lock_irq(&l3->list_lock);
drain_array_locked(searchp, cpu_cache_get(searchp), 0,
}
check_irq_on();
mutex_unlock(&cache_chain_mutex);
- drain_remote_pages();
+ next_reap_node();
/* Setup the next iteration */
schedule_delayed_work(&__get_cpu_var(reap_work), REAPTIMEOUT_CPUC);
}
struct page *page = pvec->pages[i];
if (PagePrivate(page) && !TestSetPageLocked(page)) {
- try_to_release_page(page, 0);
+ if (PagePrivate(page))
+ try_to_release_page(page, 0);
unlock_page(page);
}
}
if (count >= FBC_BATCH || count <= -FBC_BATCH) {
spin_lock(&fbc->lock);
fbc->count += count;
+ *pcount = 0;
spin_unlock(&fbc->lock);
- count = 0;
+ } else {
+ *pcount = count;
}
- *pcount = count;
put_cpu();
}
EXPORT_SYMBOL(percpu_counter_mod);
+
+/*
+ * Add up all the per-cpu counts, return the result. This is a more accurate
+ * but much slower version of percpu_counter_read_positive()
+ */
+long percpu_counter_sum(struct percpu_counter *fbc)
+{
+ long ret;
+ int cpu;
+
+ spin_lock(&fbc->lock);
+ ret = fbc->count;
+ for_each_cpu(cpu) {
+ long *pcount = per_cpu_ptr(fbc->counters, cpu);
+ ret += *pcount;
+ }
+ spin_unlock(&fbc->lock);
+ return ret < 0 ? 0 : ret;
+}
+EXPORT_SYMBOL(percpu_counter_sum);
#endif
/*
* the page.
*/
if (!mapping || page_mapcount(page) + nr_refs != page_count(page))
- return 1;
+ return -EAGAIN;
/*
* Establish swap ptes for anonymous pages or destroy pte
* If the page was not migrated then the PageSwapCache bit
* is still set and the operation may continue.
*/
- try_to_unmap(page, 1);
+ if (try_to_unmap(page, 1) == SWAP_FAIL)
+ /* A vma has VM_LOCKED set -> Permanent failure */
+ return -EPERM;
/*
* Give up if we were unable to remove all mappings.
*/
if (page_mapcount(page))
- return 1;
+ return -EAGAIN;
write_lock_irq(&mapping->tree_lock);
if (!page_mapping(page) || page_count(page) != nr_refs ||
*radix_pointer != page) {
write_unlock_irq(&mapping->tree_lock);
- return 1;
+ return -EAGAIN;
}
/*
*/
int migrate_page(struct page *newpage, struct page *page)
{
+ int rc;
+
BUG_ON(PageWriteback(page)); /* Writeback must be complete */
- if (migrate_page_remove_references(newpage, page, 2))
- return -EAGAIN;
+ rc = migrate_page_remove_references(newpage, page, 2);
+
+ if (rc)
+ return rc;
migrate_page_copy(newpage, page);
if (!(gfp_mask & __GFP_WAIT) ||
zone->all_unreclaimable ||
- atomic_read(&zone->reclaim_in_progress) > 0)
+ atomic_read(&zone->reclaim_in_progress) > 0 ||
+ (p->flags & PF_MEMALLOC))
return 0;
node_id = zone->zone_pgdat->node_id;
static void sigd_put_skb(struct sk_buff *skb)
{
#ifdef WAIT_FOR_DEMON
- static unsigned long silence;
DECLARE_WAITQUEUE(wait,current);
add_wait_queue(&sigd_sleep,&wait);
while (!sigd) {
set_current_state(TASK_UNINTERRUPTIBLE);
- if (time_after(jiffies, silence) || silence == 0) {
- printk(KERN_INFO "atmsvc: waiting for signaling demon "
- "...\n");
- silence = (jiffies+30*HZ)|1;
- }
+ DPRINTK("atmsvc: waiting for signaling demon...\n");
schedule();
}
current->state = TASK_RUNNING;
remove_wait_queue(&sigd_sleep,&wait);
#else
if (!sigd) {
- if (net_ratelimit())
- printk(KERN_WARNING "atmsvc: no signaling demon\n");
+ DPRINTK("atmsvc: no signaling demon\n");
kfree_skb(skb);
return;
}
static int min_idle[1], max_idle[] = {65535 * HZ};
static int min_n2[] = {1}, max_n2[] = {31};
static int min_paclen[] = {1}, max_paclen[] = {512};
-static int min_proto[1], max_proto[] = {3};
+static int min_proto[1], max_proto[] = { AX25_PROTO_MAX };
static int min_ds_timeout[1], max_ds_timeout[] = {65535 * HZ};
static struct ctl_table_header *ax25_table_header;
{
struct net_device *dev = arg;
struct net_bridge_port *p;
+ struct net_bridge *br;
rtnl_lock();
p = dev->br_port;
if (!p)
goto done;
-
- if (netif_carrier_ok(p->dev)) {
- u32 cost = port_cost(p->dev);
-
- spin_lock_bh(&p->br->lock);
- if (p->state == BR_STATE_DISABLED) {
- p->path_cost = cost;
- br_stp_enable_port(p);
+ br = p->br;
+
+ if (netif_carrier_ok(dev))
+ p->path_cost = port_cost(dev);
+
+ if (br->dev->flags & IFF_UP) {
+ spin_lock_bh(&br->lock);
+ if (netif_carrier_ok(dev)) {
+ if (p->state == BR_STATE_DISABLED)
+ br_stp_enable_port(p);
+ } else {
+ if (p->state != BR_STATE_DISABLED)
+ br_stp_disable_port(p);
}
- spin_unlock_bh(&p->br->lock);
- } else {
- spin_lock_bh(&p->br->lock);
- if (p->state != BR_STATE_DISABLED)
- br_stp_disable_port(p);
- spin_unlock_bh(&p->br->lock);
+ spin_unlock_bh(&br->lock);
}
done:
rtnl_unlock();
rcu_assign_pointer(dev->br_port, NULL);
+ kobject_uevent(&p->kobj, KOBJ_REMOVE);
kobject_del(&p->kobj);
call_rcu(&p->rcu, destroy_nbp_rcu);
br_init_port(p);
p->state = BR_STATE_DISABLED;
INIT_WORK(&p->carrier_check, port_carrier_check, dev);
- kobject_init(&p->kobj);
+ br_stp_port_timer_init(p);
+ kobject_init(&p->kobj);
kobject_set_name(&p->kobj, SYSFS_BRIDGE_PORT_ATTR);
p->kobj.ktype = &brport_ktype;
p->kobj.parent = &(dev->class_dev.kobj);
p->state = BR_STATE_BLOCKING;
p->topology_change_ack = 0;
p->config_pending = 0;
-
- br_stp_port_timer_init(p);
}
/* called under bridge lock */
# watchers
obj-$(CONFIG_BRIDGE_EBT_LOG) += ebt_log.o
-obj-$(CONFIG_BRIDGE_EBT_LOG) += ebt_ulog.o
+obj-$(CONFIG_BRIDGE_EBT_ULOG) += ebt_ulog.o
li.u.log.level = info->loglevel;
li.u.log.logflags = info->bitmask;
- nf_log_packet(PF_BRIDGE, hooknr, skb, in, out, &li, info->prefix);
+ if (info->bitmask & EBT_LOG_NFLOG)
+ nf_log_packet(PF_BRIDGE, hooknr, skb, in, out, &li,
+ info->prefix);
+ else
+ ebt_log_packet(PF_BRIDGE, hooknr, skb, in, out, &li,
+ info->prefix);
}
static struct ebt_watcher log =
get_random_bytes(&lopt->hash_rnd, sizeof(lopt->hash_rnd));
rwlock_init(&queue->syn_wait_lock);
queue->rskq_accept_head = queue->rskq_accept_head = NULL;
- queue->rskq_defer_accept = 0;
lopt->nr_table_entries = nr_table_entries;
write_lock_bh(&queue->syn_wait_lock);
* net/dccp/ccids/ccid3.c
*
* Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand.
- * Copyright (c) 2005 Ian McDonald <iam4@cs.waikato.ac.nz>
+ * Copyright (c) 2005-6 Ian McDonald <imcdnzl@gmail.com>
*
* An implementation of the DCCP protocol
*
p_prev = hcrx->ccid3hcrx_p;
/* Calculate loss event rate */
- if (!list_empty(&hcrx->ccid3hcrx_li_hist))
+ if (!list_empty(&hcrx->ccid3hcrx_li_hist)) {
+ u32 i_mean = dccp_li_hist_calc_i_mean(&hcrx->ccid3hcrx_li_hist);
+
/* Scaling up by 1000000 as fixed decimal */
- hcrx->ccid3hcrx_p = 1000000 / dccp_li_hist_calc_i_mean(&hcrx->ccid3hcrx_li_hist);
+ if (i_mean != 0)
+ hcrx->ccid3hcrx_p = 1000000 / i_mean;
+ }
if (hcrx->ccid3hcrx_p > p_prev) {
ccid3_hc_rx_send_feedback(sk);
a4_included = ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS));
qc_included = ((WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA) &&
- (WLAN_FC_GET_STYPE(fc) & 0x08));
+ (WLAN_FC_GET_STYPE(fc) & IEEE80211_STYPE_QOS_DATA));
aad_len = 22;
if (a4_included)
aad_len += 6;
/* dst->last_associate is not overwritten */
}
-static inline int is_beacon(int fc)
+static inline int is_beacon(__le16 fc)
{
return (WLAN_FC_GET_STYPE(le16_to_cpu(fc)) == IEEE80211_STYPE_BEACON);
}
escape_essid(info_element->data,
info_element->len),
MAC_ARG(beacon->header.addr3),
- is_beacon(le16_to_cpu
- (beacon->header.
- frame_ctl)) ?
+ is_beacon(beacon->header.frame_ctl) ?
"BEACON" : "PROBE RESPONSE");
return;
}
escape_essid(network.ssid,
network.ssid_len),
MAC_ARG(network.bssid),
- is_beacon(le16_to_cpu
- (beacon->header.
- frame_ctl)) ?
+ is_beacon(beacon->header.frame_ctl) ?
"BEACON" : "PROBE RESPONSE");
#endif
memcpy(target, &network, sizeof(*target));
escape_essid(target->ssid,
target->ssid_len),
MAC_ARG(target->bssid),
- is_beacon(le16_to_cpu
- (beacon->header.
- frame_ctl)) ?
+ is_beacon(beacon->header.frame_ctl) ?
"BEACON" : "PROBE RESPONSE");
update_network(target, &network);
}
spin_unlock_irqrestore(&ieee->lock, flags);
- if (is_beacon(le16_to_cpu(beacon->header.frame_ctl))) {
+ if (is_beacon(beacon->header.frame_ctl)) {
if (ieee->handle_beacon != NULL)
- ieee->handle_beacon(dev, beacon, &network);
+ ieee->handle_beacon(dev, beacon, target);
} else {
if (ieee->handle_probe_response != NULL)
- ieee->handle_probe_response(dev, beacon, &network);
+ ieee->handle_probe_response(dev, beacon, target);
}
}
#include <net/protocol.h>
#include <net/udp.h>
-/* decapsulation data for use when post-processing */
-struct esp_decap_data {
- xfrm_address_t saddr;
- __u16 sport;
- __u8 proto;
-};
-
static int esp_output(struct xfrm_state *x, struct sk_buff *skb)
{
int err;
int elen = skb->len - sizeof(struct ip_esp_hdr) - esp->conf.ivlen - alen;
int nfrags;
int encap_len = 0;
+ u8 nexthdr[2];
+ struct scatterlist *sg;
+ u8 workbuf[60];
+ int padlen;
if (!pskb_may_pull(skb, sizeof(struct ip_esp_hdr)))
goto out;
if (esp->conf.ivlen)
crypto_cipher_set_iv(esp->conf.tfm, esph->enc_data, crypto_tfm_alg_ivsize(esp->conf.tfm));
- {
- u8 nexthdr[2];
- struct scatterlist *sg = &esp->sgbuf[0];
- u8 workbuf[60];
- int padlen;
-
- if (unlikely(nfrags > ESP_NUM_FAST_SG)) {
- sg = kmalloc(sizeof(struct scatterlist)*nfrags, GFP_ATOMIC);
- if (!sg)
- goto out;
- }
- skb_to_sgvec(skb, sg, sizeof(struct ip_esp_hdr) + esp->conf.ivlen, elen);
- crypto_cipher_decrypt(esp->conf.tfm, sg, sg, elen);
- if (unlikely(sg != &esp->sgbuf[0]))
- kfree(sg);
-
- if (skb_copy_bits(skb, skb->len-alen-2, nexthdr, 2))
- BUG();
+ sg = &esp->sgbuf[0];
- padlen = nexthdr[0];
- if (padlen+2 >= elen)
+ if (unlikely(nfrags > ESP_NUM_FAST_SG)) {
+ sg = kmalloc(sizeof(struct scatterlist)*nfrags, GFP_ATOMIC);
+ if (!sg)
goto out;
-
- /* ... check padding bits here. Silly. :-) */
-
- if (x->encap && decap && decap->decap_type) {
- struct esp_decap_data *encap_data;
- struct udphdr *uh = (struct udphdr *) (iph+1);
-
- encap_data = (struct esp_decap_data *) (decap->decap_data);
- encap_data->proto = 0;
-
- switch (decap->decap_type) {
- case UDP_ENCAP_ESPINUDP:
- case UDP_ENCAP_ESPINUDP_NON_IKE:
- encap_data->proto = AF_INET;
- encap_data->saddr.a4 = iph->saddr;
- encap_data->sport = uh->source;
- encap_len = (void*)esph - (void*)uh;
- break;
-
- default:
- goto out;
- }
- }
-
- iph->protocol = nexthdr[1];
- pskb_trim(skb, skb->len - alen - padlen - 2);
- memcpy(workbuf, skb->nh.raw, iph->ihl*4);
- skb->h.raw = skb_pull(skb, sizeof(struct ip_esp_hdr) + esp->conf.ivlen);
- skb->nh.raw += encap_len + sizeof(struct ip_esp_hdr) + esp->conf.ivlen;
- memcpy(skb->nh.raw, workbuf, iph->ihl*4);
- skb->nh.iph->tot_len = htons(skb->len);
}
+ skb_to_sgvec(skb, sg, sizeof(struct ip_esp_hdr) + esp->conf.ivlen, elen);
+ crypto_cipher_decrypt(esp->conf.tfm, sg, sg, elen);
+ if (unlikely(sg != &esp->sgbuf[0]))
+ kfree(sg);
- return 0;
+ if (skb_copy_bits(skb, skb->len-alen-2, nexthdr, 2))
+ BUG();
-out:
- return -EINVAL;
-}
+ padlen = nexthdr[0];
+ if (padlen+2 >= elen)
+ goto out;
-static int esp_post_input(struct xfrm_state *x, struct xfrm_decap_state *decap, struct sk_buff *skb)
-{
-
- if (x->encap) {
- struct xfrm_encap_tmpl *encap;
- struct esp_decap_data *decap_data;
+ /* ... check padding bits here. Silly. :-) */
- encap = x->encap;
- decap_data = (struct esp_decap_data *)(decap->decap_data);
+ if (x->encap) {
+ struct xfrm_encap_tmpl *encap = x->encap;
+ struct udphdr *uh;
- /* first, make sure that the decap type == the encap type */
if (encap->encap_type != decap->decap_type)
- return -EINVAL;
+ goto out;
- switch (encap->encap_type) {
- default:
- case UDP_ENCAP_ESPINUDP:
- case UDP_ENCAP_ESPINUDP_NON_IKE:
- /*
- * 1) if the NAT-T peer's IP or port changed then
- * advertize the change to the keying daemon.
- * This is an inbound SA, so just compare
- * SRC ports.
- */
- if (decap_data->proto == AF_INET &&
- (decap_data->saddr.a4 != x->props.saddr.a4 ||
- decap_data->sport != encap->encap_sport)) {
- xfrm_address_t ipaddr;
-
- ipaddr.a4 = decap_data->saddr.a4;
- km_new_mapping(x, &ipaddr, decap_data->sport);
-
- /* XXX: perhaps add an extra
- * policy check here, to see
- * if we should allow or
- * reject a packet from a
- * different source
- * address/port.
- */
- }
-
- /*
- * 2) ignore UDP/TCP checksums in case
- * of NAT-T in Transport Mode, or
- * perform other post-processing fixes
- * as per * draft-ietf-ipsec-udp-encaps-06,
- * section 3.1.2
+ uh = (struct udphdr *)(iph + 1);
+ encap_len = (void*)esph - (void*)uh;
+
+ /*
+ * 1) if the NAT-T peer's IP or port changed then
+ * advertize the change to the keying daemon.
+ * This is an inbound SA, so just compare
+ * SRC ports.
+ */
+ if (iph->saddr != x->props.saddr.a4 ||
+ uh->source != encap->encap_sport) {
+ xfrm_address_t ipaddr;
+
+ ipaddr.a4 = iph->saddr;
+ km_new_mapping(x, &ipaddr, uh->source);
+
+ /* XXX: perhaps add an extra
+ * policy check here, to see
+ * if we should allow or
+ * reject a packet from a
+ * different source
+ * address/port.
*/
- if (!x->props.mode)
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-
- break;
}
+
+ /*
+ * 2) ignore UDP/TCP checksums in case
+ * of NAT-T in Transport Mode, or
+ * perform other post-processing fixes
+ * as per draft-ietf-ipsec-udp-encaps-06,
+ * section 3.1.2
+ */
+ if (!x->props.mode)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
}
+
+ iph->protocol = nexthdr[1];
+ pskb_trim(skb, skb->len - alen - padlen - 2);
+ memcpy(workbuf, skb->nh.raw, iph->ihl*4);
+ skb->h.raw = skb_pull(skb, sizeof(struct ip_esp_hdr) + esp->conf.ivlen);
+ skb->nh.raw += encap_len + sizeof(struct ip_esp_hdr) + esp->conf.ivlen;
+ memcpy(skb->nh.raw, workbuf, iph->ihl*4);
+ skb->nh.iph->tot_len = htons(skb->len);
+
return 0;
+
+out:
+ return -EINVAL;
}
static u32 esp4_get_max_size(struct xfrm_state *x, int mtu)
.destructor = esp_destroy,
.get_max_size = esp4_get_max_size,
.input = esp_input,
- .post_input = esp_post_input,
.output = esp_output
};
static int __init esp4_init(void)
{
- struct xfrm_decap_state decap;
-
- if (sizeof(struct esp_decap_data) >
- sizeof(decap.decap_data)) {
- extern void decap_data_too_small(void);
-
- decap_data_too_small();
- }
-
if (xfrm_register_type(&esp_type, AF_INET) < 0) {
printk(KERN_INFO "ip esp init: can't add xfrm type\n");
return -EAGAIN;
if (((length > mtu) && (sk->sk_protocol == IPPROTO_UDP)) &&
(rt->u.dst.dev->features & NETIF_F_UFO)) {
- if(ip_ufo_append_data(sk, getfrag, from, length, hh_len,
- fragheaderlen, transhdrlen, mtu, flags))
+ err = ip_ufo_append_data(sk, getfrag, from, length, hh_len,
+ fragheaderlen, transhdrlen, mtu,
+ flags);
+ if (err)
goto error;
-
return 0;
}
struct arpt_table *t;
t = xt_find_table_lock(NF_ARP, entries->name);
- if (t || !IS_ERR(t)) {
+ if (t && !IS_ERR(t)) {
struct xt_table_info *private = t->private;
duprintf("t->private->number = %u\n",
private->number);
write_unlock_bh(&queue_lock);
status = ipq_receive_peer(NLMSG_DATA(nlh), type,
- skblen - NLMSG_LENGTH(0));
+ nlmsglen - NLMSG_LENGTH(0));
if (status < 0)
RCV_SKB_FAIL(status);
li.u.log.level = loginfo->level;
li.u.log.logflags = loginfo->logflags;
- nf_log_packet(PF_INET, hooknum, *pskb, in, out, &li, loginfo->prefix);
+ if (loginfo->logflags & IPT_LOG_NFLOG)
+ nf_log_packet(PF_INET, hooknum, *pskb, in, out, &li,
+ loginfo->prefix);
+ else
+ ipt_log_packet(PF_INET, hooknum, *pskb, in, out, &li,
+ loginfo->prefix);
return IPT_CONTINUE;
}
/* Update AIMD parameters */
if (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd) {
while (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd &&
- ca->ai < HSTCP_AIMD_MAX)
+ ca->ai < HSTCP_AIMD_MAX - 1)
ca->ai++;
} else if (tp->snd_cwnd < hstcp_aimd_vals[ca->ai].cwnd) {
while (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd &&
limit = min(send_win, cong_win);
+ /* If a full-sized TSO skb can be sent, do it. */
+ if (limit >= 65536)
+ return 0;
+
if (sysctl_tcp_tso_win_divisor) {
u32 chunk = min(tp->snd_wnd, tp->snd_cwnd * tp->mss_cache);
int addr_type;
unsigned int attrs;
int matchlen;
- unsigned int scope;
+ int scope;
unsigned int rule;
};
goto out;
memcpy(tmp_hdr, skb->nh.raw, hdr_len);
if (ipv6_clear_mutable_options(skb->nh.ipv6h, hdr_len))
- goto out;
+ goto free_out;
skb->nh.ipv6h->priority = 0;
skb->nh.ipv6h->flow_lbl[0] = 0;
skb->nh.ipv6h->flow_lbl[1] = 0;
struct inet_timewait_sock **twp)
{
struct inet_hashinfo *hinfo = death_row->hashinfo;
- const struct inet_sock *inet = inet_sk(sk);
+ struct inet_sock *inet = inet_sk(sk);
const struct ipv6_pinfo *np = inet6_sk(sk);
const struct in6_addr *daddr = &np->rcv_saddr;
const struct in6_addr *saddr = &np->daddr;
}
unique:
+ /* Must record num and sport now. Otherwise we will see
+ * in hash table socket with a funny identity. */
+ inet->num = lport;
+ inet->sport = htons(lport);
BUG_TRAP(sk_unhashed(sk));
__sk_add_node(sk, &head->chain);
sk->sk_hash = hash;
if (((length > mtu) && (sk->sk_protocol == IPPROTO_UDP)) &&
(rt->u.dst.dev->features & NETIF_F_UFO)) {
- if(ip6_ufo_append_data(sk, getfrag, from, length, hh_len,
- fragheaderlen, transhdrlen, mtu, flags))
+ err = ip6_ufo_append_data(sk, getfrag, from, length, hh_len,
+ fragheaderlen, transhdrlen, mtu,
+ flags);
+ if (err)
goto error;
-
return 0;
}
write_unlock_bh(&queue_lock);
status = ipq_receive_peer(NLMSG_DATA(nlh), type,
- skblen - NLMSG_LENGTH(0));
+ nlmsglen - NLMSG_LENGTH(0));
if (status < 0)
RCV_SKB_FAIL(status);
li.u.log.level = loginfo->level;
li.u.log.logflags = loginfo->logflags;
- nf_log_packet(PF_INET6, hooknum, *pskb, in, out, &li, loginfo->prefix);
+ if (loginfo->logflags & IP6T_LOG_NFLOG)
+ nf_log_packet(PF_INET6, hooknum, *pskb, in, out, &li,
+ loginfo->prefix);
+ else
+ ip6t_log_packet(PF_INET6, hooknum, *pskb, in, out, &li,
+ loginfo->prefix);
return IP6T_CONTINUE;
}
#include <linux/skbuff.h>
#include <linux/netfilter.h>
#include <linux/seq_file.h>
+#include <linux/rcupdate.h>
#include <net/protocol.h>
#include "nf_internals.h"
* for queueing and must reinject all packets it receives, no matter what.
*/
static struct nf_queue_handler *queue_handler[NPROTO];
-static struct nf_queue_rerouter *queue_rerouter;
+static struct nf_queue_rerouter *queue_rerouter[NPROTO];
static DEFINE_RWLOCK(queue_handler_lock);
return -EINVAL;
write_lock_bh(&queue_handler_lock);
- memcpy(&queue_rerouter[pf], rer, sizeof(queue_rerouter[pf]));
+ rcu_assign_pointer(queue_rerouter[pf], rer);
write_unlock_bh(&queue_handler_lock);
return 0;
return -EINVAL;
write_lock_bh(&queue_handler_lock);
- memset(&queue_rerouter[pf], 0, sizeof(queue_rerouter[pf]));
+ rcu_assign_pointer(queue_rerouter[pf], NULL);
write_unlock_bh(&queue_handler_lock);
+ synchronize_rcu();
return 0;
}
EXPORT_SYMBOL_GPL(nf_unregister_queue_rerouter);
struct net_device *physindev = NULL;
struct net_device *physoutdev = NULL;
#endif
+ struct nf_queue_rerouter *rerouter;
/* QUEUE == DROP if noone is waiting, to be safe. */
read_lock(&queue_handler_lock);
- if (!queue_handler[pf] || !queue_handler[pf]->outfn) {
+ if (!queue_handler[pf]) {
read_unlock(&queue_handler_lock);
kfree_skb(*skb);
return 1;
}
- info = kmalloc(sizeof(*info)+queue_rerouter[pf].rer_size, GFP_ATOMIC);
+ info = kmalloc(sizeof(*info)+queue_rerouter[pf]->rer_size, GFP_ATOMIC);
if (!info) {
if (net_ratelimit())
printk(KERN_ERR "OOM queueing packet %p\n",
if (physoutdev) dev_hold(physoutdev);
}
#endif
- if (queue_rerouter[pf].save)
- queue_rerouter[pf].save(*skb, info);
+ rerouter = rcu_dereference(queue_rerouter[pf]);
+ if (rerouter)
+ rerouter->save(*skb, info);
status = queue_handler[pf]->outfn(*skb, info, queuenum,
queue_handler[pf]->data);
- if (status >= 0 && queue_rerouter[pf].reroute)
- status = queue_rerouter[pf].reroute(skb, info);
-
read_unlock(&queue_handler_lock);
if (status < 0) {
{
struct list_head *elem = &info->elem->list;
struct list_head *i;
+ struct nf_queue_rerouter *rerouter;
rcu_read_lock();
break;
}
- if (elem == &nf_hooks[info->pf][info->hook]) {
+ if (i == &nf_hooks[info->pf][info->hook]) {
/* The module which sent it to userspace is gone. */
NFDEBUG("%s: module disappeared, dropping packet.\n",
__FUNCTION__);
verdict = NF_ACCEPT;
}
+ if (verdict == NF_ACCEPT) {
+ rerouter = rcu_dereference(queue_rerouter[info->pf]);
+ if (rerouter && rerouter->reroute(&skb, info) < 0)
+ verdict = NF_DROP;
+ }
+
if (verdict == NF_ACCEPT) {
next_hook:
verdict = nf_iterate(&nf_hooks[info->pf][info->hook],
{
#ifdef CONFIG_PROC_FS
struct proc_dir_entry *pde;
-#endif
- queue_rerouter = kmalloc(NPROTO * sizeof(struct nf_queue_rerouter),
- GFP_KERNEL);
- if (!queue_rerouter)
- return -ENOMEM;
-#ifdef CONFIG_PROC_FS
pde = create_proc_entry("nf_queue", S_IRUGO, proc_net_netfilter);
- if (!pde) {
- kfree(queue_rerouter);
+ if (!pde)
return -1;
- }
pde->proc_fops = &nfqueue_file_ops;
#endif
- memset(queue_rerouter, 0, NPROTO * sizeof(struct nf_queue_rerouter));
-
return 0;
}
if (nfqa[NFQA_CFG_PARAMS-1]) {
struct nfqnl_msg_config_params *params;
- params = NFA_DATA(nfqa[NFQA_CFG_PARAMS-1]);
+ if (!queue) {
+ ret = -ENOENT;
+ goto out_put;
+ }
+ params = NFA_DATA(nfqa[NFQA_CFG_PARAMS-1]);
nfqnl_set_mode(queue, params->copy_mode,
ntohl(params->copy_range));
}
msg->msg_namelen = sizeof(*addr);
}
+ if (nlk->flags & NETLINK_RECV_PKTINFO)
+ netlink_cmsg_recv_pktinfo(msg, skb);
+
if (NULL == siocb->scm) {
memset(&scm, 0, sizeof(scm));
siocb->scm = &scm;
netlink_dump(sk);
scm_recv(sock, msg, siocb->scm, flags);
- if (nlk->flags & NETLINK_RECV_PKTINFO)
- netlink_cmsg_recv_pktinfo(msg, skb);
out:
netlink_rcv_wake(sk);
rtattr_failure:
nlmsg_failure:
- skb_trim(skb, b - skb->data);
+ kfree_skb(skb);
return -1;
}
err = -EINVAL;
if (!xprt)
- goto out_err;
+ goto out_no_xprt;
if (vers >= program->nrvers || !(version = program->version[vers]))
goto out_err;
kfree(clnt);
out_err:
xprt_destroy(xprt);
+out_no_xprt:
return ERR_PTR(err);
}
*/
void rpc_wake_up(struct rpc_wait_queue *queue)
{
- struct rpc_task *task;
-
+ struct rpc_task *task, *next;
struct list_head *head;
+
spin_lock_bh(&queue->lock);
head = &queue->tasks[queue->maxpriority];
for (;;) {
- while (!list_empty(head)) {
- task = list_entry(head->next, struct rpc_task, u.tk_wait.list);
+ list_for_each_entry_safe(task, next, head, u.tk_wait.list)
__rpc_wake_up_task(task);
- }
if (head == &queue->tasks[0])
break;
head--;
*/
void rpc_wake_up_status(struct rpc_wait_queue *queue, int status)
{
+ struct rpc_task *task, *next;
struct list_head *head;
- struct rpc_task *task;
spin_lock_bh(&queue->lock);
head = &queue->tasks[queue->maxpriority];
for (;;) {
- while (!list_empty(head)) {
- task = list_entry(head->next, struct rpc_task, u.tk_wait.list);
+ list_for_each_entry_safe(task, next, head, u.tk_wait.list) {
task->tk_status = status;
__rpc_wake_up_task(task);
}
struct sock *sk = NULL;
struct unix_sock *u;
- if (atomic_read(&unix_nr_socks) >= 2*files_stat.max_files)
+ if (atomic_read(&unix_nr_socks) >= 2*get_max_files())
goto out;
sk = sk_alloc(PF_UNIX, GFP_KERNEL, &unix_proto, 1);
struct sec_decap_state *xvec = &(skb->sp->x[i]);
if (!xfrm_selector_match(&xvec->xvec->sel, &fl, family))
return 0;
-
- /* If there is a post_input processor, try running it */
- if (xvec->xvec->type->post_input &&
- (xvec->xvec->type->post_input)(xvec->xvec,
- &(xvec->decap),
- skb) != 0)
- return 0;
}
}
id->cu_model);
ADD(alias, "dt", id->match_flags&CCW_DEVICE_ID_MATCH_DEVICE_TYPE,
id->dev_type);
- ADD(alias, "dm", id->match_flags&CCW_DEVICE_ID_MATCH_DEVICE_TYPE,
+ ADD(alias, "dm", id->match_flags&CCW_DEVICE_ID_MATCH_DEVICE_MODEL,
id->dev_model);
return 1;
}
va_start(ap, fmt);
len = vsnprintf(tmp, SZ, fmt, ap);
- if (buf->size - buf->pos < len + 1) {
- buf->size += 128;
- buf->p = realloc(buf->p, buf->size);
- }
- strncpy(buf->p + buf->pos, tmp, len + 1);
- buf->pos += len;
+ buf_write(buf, tmp, len);
va_end(ap);
}
buf_write(struct buffer *buf, const char *s, int len)
{
if (buf->size - buf->pos < len) {
- buf->size += len;
+ buf->size += len + SZ;
buf->p = realloc(buf->p, buf->size);
}
strncpy(buf->p + buf->pos, s, len);
rc = task_has_perm(parent, child, PROCESS__PTRACE);
/* Save the SID of the tracing process for later use in apply_creds. */
- if (!rc)
+ if (!(child->ptrace & PT_PTRACED) && !rc)
csec->ptrace_sid = psec->sid;
return rc;
}
kctl.private_free = snd_ctl_elem_user_free;
_kctl = snd_ctl_new(&kctl, access);
if (_kctl == NULL) {
- kfree(_kctl->private_data);
+ kfree(ue);
return -ENOMEM;
}
_kctl->private_data = ue;
for (idx = 0; idx < _kctl->count; idx++)
_kctl->vd[idx].owner = file;
err = snd_ctl_add(card, _kctl);
- if (err < 0) {
- snd_ctl_free_one(_kctl);
+ if (err < 0)
return err;
- }
down_write(&card->controls_rwsem);
card->user_ctl_count++;
projects / linux-2.6-omap-h63xx.git / commitdiff