]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
x86: don't set IO APIC features if IO APIC is not enabled
authorAlexey Starikovskiy <astarikovskiy@suse.de>
Fri, 4 Apr 2008 19:41:07 +0000 (23:41 +0400)
committerIngo Molnar <mingo@elte.hu>
Thu, 17 Apr 2008 15:41:34 +0000 (17:41 +0200)
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
arch/x86/kernel/mpparse_32.c
include/asm-x86/mach-default/mach_apic.h
include/asm-x86/mpspec.h

index 4f4cfad9ae5737f5eefe4565a220edbdb6845a90..09cb77813680ff5a2e73f9b9a32f0ff0de123d95 100644 (file)
@@ -221,6 +221,8 @@ static void __init MP_bus_info (struct mpc_config_bus *m)
        }
 }
 
+#ifdef CONFIG_X86_IO_APIC
+
 static int bad_ioapic(unsigned long address)
 {
        if (nr_ioapics >= MAX_IO_APICS) {
@@ -263,6 +265,8 @@ static void __init MP_intsrc_info (struct mpc_config_intsrc *m)
                panic("Max # of irq sources exceeded!!\n");
 }
 
+#endif
+
 static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m)
 {
        Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
@@ -421,21 +425,25 @@ static int __init smp_read_mpc(struct mp_config_table *mpc)
                        }
                        case MP_IOAPIC:
                        {
+#ifdef CONFIG_X86_IO_APIC
                                struct mpc_config_ioapic *m=
                                        (struct mpc_config_ioapic *)mpt;
                                MP_ioapic_info(m);
                                mpt+=sizeof(*m);
                                count+=sizeof(*m);
+#endif
                                break;
                        }
                        case MP_INTSRC:
                        {
+#ifdef CONFIG_X86_IO_APIC
                                struct mpc_config_intsrc *m=
                                        (struct mpc_config_intsrc *)mpt;
 
                                MP_intsrc_info(m);
                                mpt+=sizeof(*m);
                                count+=sizeof(*m);
+#endif
                                break;
                        }
                        case MP_LINTSRC:
@@ -463,6 +471,8 @@ static int __init smp_read_mpc(struct mp_config_table *mpc)
        return num_processors;
 }
 
+#ifdef CONFIG_X86_IO_APIC
+
 static int __init ELCR_trigger(unsigned int irq)
 {
        unsigned int port;
@@ -537,11 +547,15 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type)
        MP_intsrc_info(&intsrc);
 }
 
+#endif
+
 static inline void __init construct_default_ISA_mptable(int mpc_default_type)
 {
        struct mpc_config_processor processor;
        struct mpc_config_bus bus;
+#ifdef CONFIG_X86_IO_APIC
        struct mpc_config_ioapic ioapic;
+#endif
        struct mpc_config_lintsrc lintsrc;
        int linttypes[2] = { mp_ExtINT, mp_NMI };
        int i;
@@ -597,6 +611,7 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
                MP_bus_info(&bus);
        }
 
+#ifdef CONFIG_X86_IO_APIC
        ioapic.mpc_type = MP_IOAPIC;
        ioapic.mpc_apicid = 2;
        ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
@@ -608,7 +623,7 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
         * We set up most of the low 16 IO-APIC pins according to MPS rules.
         */
        construct_default_ioirq_mptable(mpc_default_type);
-
+#endif
        lintsrc.mpc_type = MP_LINTSRC;
        lintsrc.mpc_irqflag = 0;                /* conforming */
        lintsrc.mpc_srcbusid = 0;
@@ -670,6 +685,8 @@ void __init get_smp_config (void)
                        printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
                        return;
                }
+
+#ifdef CONFIG_X86_IO_APIC
                /*
                 * If there are no explicit MP IRQ entries, then we are
                 * broken.  We set up most of the low 16 IO-APIC pins to
@@ -687,7 +704,7 @@ void __init get_smp_config (void)
 
                        construct_default_ioirq_mptable(0);
                }
-
+#endif
        } else
                BUG();
 
@@ -967,8 +984,9 @@ void __init mp_config_acpi_legacy_irqs (void)
        intsrc.mpc_type = MP_INTSRC;
        intsrc.mpc_irqflag = 0;                                 /* Conforming */
        intsrc.mpc_srcbus = MP_ISA_BUS;
+#ifdef CONFIG_X86_IO_APIC
        intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
-
+#endif
        /* 
         * Use the default configuration for the IRQs 0-15.  Unless
         * overridden by (MADT) interrupt source override entries.
index 14217a970c5e31a9c1746e7e5c97910900d0175c..0a6634f62abe2c1c37d91d078846cdeef51f15c3 100644 (file)
@@ -69,8 +69,10 @@ static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
 
 static inline void setup_apic_routing(void)
 {
+#ifdef CONFIG_X86_IO_APIC
        printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
                                        "Flat", nr_ioapics);
+#endif
 }
 
 static inline int apicid_to_node(int logical_apicid)
index 1f6445b147f817721832fb64c5ace1799d30a303..08cc5e02795899688e7372c3d0c18626f2dabb83 100644 (file)
@@ -36,9 +36,6 @@ extern int mp_bus_id_to_pci_bus[MAX_MP_BUSSES];
 
 extern unsigned int boot_cpu_physical_apicid;
 extern int smp_found_config;
-extern int nr_ioapics;
-extern int mp_irq_entries;
-extern struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
 extern int mpc_default_type;
 extern unsigned long mp_lapic_addr;