]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
b43legacy: Fix rfkill radio LED
authorLarry Finger <Larry.Finger@lwfinger.net>
Sun, 16 Dec 2007 18:21:06 +0000 (19:21 +0100)
committerDavid S. Miller <davem@davemloft.net>
Mon, 28 Jan 2008 23:07:25 +0000 (15:07 -0800)
This fixes Bug #9414 for b43legacy. This patch is the equivalent of one
submitted earlier for b43.

Since addition of the rfkill callback, the LED associated with the off
switch on the radio has not worked for several reasons:

(1) Essential data in the rfkill structure were missing.
(2) The rfkill structure was initialized after the LED initialization.
(3) There was a minor memory leak if the radio LED structure was inited.

Once the above problems were fixed, additional difficulties were noted:

(4) The radio LED was in the wrong state at startup.
(5) The radio switch had to be manipulated twice for each state change.
(6) A circular mutex locking situation existed.
(7) If rfkill-input is built as a module, it is not automatically loaded.

This patch fixes all of the above and removes a couple of sparse warnings.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/b43legacy/leds.c
drivers/net/wireless/b43legacy/main.c
drivers/net/wireless/b43legacy/rfkill.c

index f0affb781002dc2d9cafb350e322ca022b5011d6..cacb786d97136498f645e10859cd7e9af8df4fee 100644 (file)
@@ -165,6 +165,9 @@ static void b43legacy_map_led(struct b43legacy_wldev *dev,
                b43legacy_register_led(dev, &dev->led_radio, name,
                                 b43legacy_rfkill_led_name(dev),
                                 led_index, activelow);
+               /* Sync the RF-kill LED state with the switch state. */
+               if (dev->radio_hw_enable)
+                       b43legacy_led_turn_on(dev, led_index, activelow);
                break;
        case B43legacy_LED_WEIRD:
        case B43legacy_LED_ASSOC:
@@ -234,4 +237,5 @@ void b43legacy_leds_exit(struct b43legacy_wldev *dev)
        b43legacy_unregister_led(&dev->led_tx);
        b43legacy_unregister_led(&dev->led_rx);
        b43legacy_unregister_led(&dev->led_assoc);
+       b43legacy_unregister_led(&dev->led_radio);
 }
index aa723effcf22592338645a7a11f2fc194fdcc271..14087fc20f3a0b630ff649a4c809a861aea480b2 100644 (file)
@@ -1995,7 +1995,6 @@ static void b43legacy_mgmtframe_txantenna(struct b43legacy_wldev *dev,
 static void b43legacy_chip_exit(struct b43legacy_wldev *dev)
 {
        b43legacy_radio_turn_off(dev, 1);
-       b43legacy_leds_exit(dev);
        b43legacy_gpio_cleanup(dev);
        /* firmware is released later */
 }
@@ -2025,11 +2024,10 @@ static int b43legacy_chip_init(struct b43legacy_wldev *dev)
        err = b43legacy_gpio_init(dev);
        if (err)
                goto out; /* firmware is released later */
-       b43legacy_leds_init(dev);
 
        err = b43legacy_upload_initvals(dev);
        if (err)
-               goto err_leds_exit;
+               goto err_gpio_clean;
        b43legacy_radio_turn_on(dev);
 
        b43legacy_write16(dev, 0x03E6, 0x0000);
@@ -2111,8 +2109,7 @@ out:
 
 err_radio_off:
        b43legacy_radio_turn_off(dev, 1);
-err_leds_exit:
-       b43legacy_leds_exit(dev);
+err_gpio_clean:
        b43legacy_gpio_cleanup(dev);
        goto out;
 }
@@ -2969,10 +2966,7 @@ static void b43legacy_wireless_core_exit(struct b43legacy_wldev *dev)
        cancel_work_sync(&dev->restart_work);
        mutex_lock(&wl->mutex);
 
-       mutex_unlock(&dev->wl->mutex);
-       b43legacy_rfkill_exit(dev);
-       mutex_lock(&dev->wl->mutex);
-
+       b43legacy_leds_exit(dev);
        b43legacy_rng_exit(dev->wl);
        b43legacy_pio_free(dev);
        b43legacy_dma_free(dev);
@@ -3138,11 +3132,11 @@ static int b43legacy_wireless_core_init(struct b43legacy_wldev *dev)
        memset(wl->mac_addr, 0, ETH_ALEN);
        b43legacy_upload_card_macaddress(dev);
        b43legacy_security_init(dev);
-       b43legacy_rfkill_init(dev);
        b43legacy_rng_init(wl);
 
        b43legacy_set_status(dev, B43legacy_STAT_INITIALIZED);
 
+       b43legacy_leds_init(dev);
 out:
        return err;
 
@@ -3231,6 +3225,10 @@ static int b43legacy_op_start(struct ieee80211_hw *hw)
        int did_init = 0;
        int err = 0;
 
+       /* First register RFkill.
+        * LEDs that are registered later depend on it. */
+       b43legacy_rfkill_init(dev);
+
        mutex_lock(&wl->mutex);
 
        if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED) {
@@ -3260,6 +3258,8 @@ static void b43legacy_op_stop(struct ieee80211_hw *hw)
        struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
        struct b43legacy_wldev *dev = wl->current_dev;
 
+       b43legacy_rfkill_exit(dev);
+
        mutex_lock(&wl->mutex);
        if (b43legacy_status(dev) >= B43legacy_STAT_STARTED)
                b43legacy_wireless_core_stop(dev);
index b9d38a4f286dd80c96840070ffd18ff63cca5101..520910fd5c4586a973deebefaeb90c1539c7521b 100644 (file)
@@ -26,6 +26,8 @@
 #include "radio.h"
 #include "b43legacy.h"
 
+#include <linux/kmod.h>
+
 
 /* Returns TRUE, if the radio is enabled in hardware. */
 static bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev)
@@ -51,7 +53,10 @@ static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev)
        bool report_change = 0;
 
        mutex_lock(&wl->mutex);
-       B43legacy_WARN_ON(b43legacy_status(dev) < B43legacy_STAT_INITIALIZED);
+       if (unlikely(b43legacy_status(dev) < B43legacy_STAT_INITIALIZED)) {
+               mutex_unlock(&wl->mutex);
+               return;
+       }
        enabled = b43legacy_is_hw_radio_enabled(dev);
        if (unlikely(enabled != dev->radio_hw_enable)) {
                dev->radio_hw_enable = enabled;
@@ -61,8 +66,12 @@ static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev)
        }
        mutex_unlock(&wl->mutex);
 
-       if (unlikely(report_change))
-               input_report_key(poll_dev->input, KEY_WLAN, enabled);
+       /* send the radio switch event to the system - note both a key press
+        * and a release are required */
+       if (unlikely(report_change)) {
+               input_report_key(poll_dev->input, KEY_WLAN, 1);
+               input_report_key(poll_dev->input, KEY_WLAN, 0);
+       }
 }
 
 /* Called when the RFKILL toggled in software.
@@ -71,13 +80,15 @@ static int b43legacy_rfkill_soft_toggle(void *data, enum rfkill_state state)
 {
        struct b43legacy_wldev *dev = data;
        struct b43legacy_wl *wl = dev->wl;
-       int err = 0;
+       int err = -EBUSY;
 
        if (!wl->rfkill.registered)
                return 0;
 
        mutex_lock(&wl->mutex);
-       B43legacy_WARN_ON(b43legacy_status(dev) < B43legacy_STAT_INITIALIZED);
+       if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED)
+               goto out_unlock;
+       err = 0;
        switch (state) {
        case RFKILL_STATE_ON:
                if (!dev->radio_hw_enable) {
@@ -103,11 +114,11 @@ out_unlock:
 
 char *b43legacy_rfkill_led_name(struct b43legacy_wldev *dev)
 {
-       struct b43legacy_wl *wl = dev->wl;
+       struct b43legacy_rfkill *rfk = &(dev->wl->rfkill);
 
-       if (!wl->rfkill.rfkill)
+       if (!rfk->registered)
                return NULL;
-       return rfkill_get_led_name(wl->rfkill.rfkill);
+       return rfkill_get_led_name(rfk->rfkill);
 }
 
 void b43legacy_rfkill_init(struct b43legacy_wldev *dev)
@@ -116,53 +127,13 @@ void b43legacy_rfkill_init(struct b43legacy_wldev *dev)
        struct b43legacy_rfkill *rfk = &(wl->rfkill);
        int err;
 
-       if (rfk->rfkill) {
-               err = rfkill_register(rfk->rfkill);
-               if (err) {
-                       b43legacywarn(wl, "Failed to register RF-kill button\n");
-                       goto err_free_rfk;
-               }
-       }
-       if (rfk->poll_dev) {
-               err = input_register_polled_device(rfk->poll_dev);
-               if (err) {
-                       b43legacywarn(wl, "Failed to register RF-kill polldev\n");
-                       goto err_free_polldev;
-               }
-       }
-
-       return;
-err_free_rfk:
-       rfkill_free(rfk->rfkill);
-       rfk->rfkill = NULL;
-err_free_polldev:
-       input_free_polled_device(rfk->poll_dev);
-       rfk->poll_dev = NULL;
-}
-
-void b43legacy_rfkill_exit(struct b43legacy_wldev *dev)
-{
-       struct b43legacy_rfkill *rfk = &(dev->wl->rfkill);
-
-       if (rfk->poll_dev)
-               input_unregister_polled_device(rfk->poll_dev);
-       if (rfk->rfkill)
-               rfkill_unregister(rfk->rfkill);
-}
-
-void b43legacy_rfkill_alloc(struct b43legacy_wldev *dev)
-{
-       struct b43legacy_wl *wl = dev->wl;
-       struct b43legacy_rfkill *rfk = &(wl->rfkill);
+       rfk->registered = 0;
 
+       rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN);
+       if (!rfk->rfkill)
+               goto out_error;
        snprintf(rfk->name, sizeof(rfk->name),
                 "b43legacy-%s", wiphy_name(wl->hw->wiphy));
-
-       rfk->rfkill = rfkill_allocate(dev->dev->dev, RFKILL_TYPE_WLAN);
-       if (!rfk->rfkill) {
-               b43legacywarn(wl, "Failed to allocate RF-kill button\n");
-               return;
-       }
        rfk->rfkill->name = rfk->name;
        rfk->rfkill->state = RFKILL_STATE_ON;
        rfk->rfkill->data = dev;
@@ -170,20 +141,64 @@ void b43legacy_rfkill_alloc(struct b43legacy_wldev *dev)
        rfk->rfkill->user_claim_unsupported = 1;
 
        rfk->poll_dev = input_allocate_polled_device();
-       if (rfk->poll_dev) {
-               rfk->poll_dev->private = dev;
-               rfk->poll_dev->poll = b43legacy_rfkill_poll;
-               rfk->poll_dev->poll_interval = 1000; /* msecs */
-       } else
-               b43legacywarn(wl, "Failed to allocate RF-kill polldev\n");
+       if (!rfk->poll_dev)
+               goto err_free_rfk;
+       rfk->poll_dev->private = dev;
+       rfk->poll_dev->poll = b43legacy_rfkill_poll;
+       rfk->poll_dev->poll_interval = 1000; /* msecs */
+
+       rfk->poll_dev->input->name = rfk->name;
+       rfk->poll_dev->input->id.bustype = BUS_HOST;
+       rfk->poll_dev->input->id.vendor = dev->dev->bus->boardinfo.vendor;
+       rfk->poll_dev->input->evbit[0] = BIT(EV_KEY);
+       set_bit(KEY_WLAN, rfk->poll_dev->input->keybit);
+
+       err = rfkill_register(rfk->rfkill);
+       if (err)
+               goto err_free_polldev;
+
+#ifdef CONFIG_RFKILL_INPUT_MODULE
+       /* B43legacy RF-kill isn't useful without the rfkill-input subsystem.
+        * Try to load the module. */
+       err = request_module("rfkill-input");
+       if (err)
+               b43legacywarn(wl, "Failed to load the rfkill-input module."
+                       "The built-in radio LED will not work.\n");
+#endif /* CONFIG_RFKILL_INPUT */
+
+       err = input_register_polled_device(rfk->poll_dev);
+       if (err)
+               goto err_unreg_rfk;
+
+       rfk->registered = 1;
+
+       return;
+err_unreg_rfk:
+       rfkill_unregister(rfk->rfkill);
+err_free_polldev:
+       input_free_polled_device(rfk->poll_dev);
+       rfk->poll_dev = NULL;
+err_free_rfk:
+       rfkill_free(rfk->rfkill);
+       rfk->rfkill = NULL;
+out_error:
+       rfk->registered = 0;
+       b43legacywarn(wl, "RF-kill button init failed\n");
 }
 
-void b43legacy_rfkill_free(struct b43legacy_wldev *dev)
+void b43legacy_rfkill_exit(struct b43legacy_wldev *dev)
 {
        struct b43legacy_rfkill *rfk = &(dev->wl->rfkill);
 
+       if (!rfk->registered)
+               return;
+       rfk->registered = 0;
+
+       input_unregister_polled_device(rfk->poll_dev);
+       rfkill_unregister(rfk->rfkill);
        input_free_polled_device(rfk->poll_dev);
        rfk->poll_dev = NULL;
        rfkill_free(rfk->rfkill);
        rfk->rfkill = NULL;
 }
+