-#define H3_NAND_RB_GPIO_PIN 10
-
-static int nand_dev_ready(struct omap_nand_platform_data *data)
-{
- return gpio_get_value(H3_NAND_RB_GPIO_PIN);
-}
-
-#if defined(CONFIG_VIDEO_OV9640) || defined(CONFIG_VIDEO_OV9640_MODULE)
-
-#include <../drivers/media/video/ov9640.h>
-
-/*
- * Common OV9640 register initialization for all image sizes, pixel formats,
- * and frame rates
- */
-const static struct ov9640_reg ov9640_common[] = {
-
- { 0x12, 0x80 }, { 0x11, 0x80 }, { 0x13, 0x88 }, /* COM7, CLKRC, COM8 */
- { 0x01, 0x58 }, { 0x02, 0x24 }, { 0x04, 0x00 }, /* BLUE, RED, COM1 */
- { 0x0E, 0x81 }, { 0x0F, 0x4F }, { 0x14, 0xcA }, /* COM5, COM6, COM9 */
- { 0x16, 0x02 }, { 0x1B, 0x01 }, { 0x24, 0x70 }, /* ?, PSHFT, AEW */
- { 0x25, 0x68 }, { 0x26, 0xD3 }, { 0x27, 0x90 }, /* AEB, VPT, BBIAS */
- { 0x2A, 0x00 }, { 0x2B, 0x00 }, { 0x32, 0x24 }, /* EXHCH, EXHCL, HREF */
- { 0x33, 0x02 }, { 0x37, 0x02 }, { 0x38, 0x13 }, /* CHLF, ADC, ACOM */
- { 0x39, 0xF0 }, { 0x3A, 0x00 }, { 0x3B, 0x01 }, /* OFON, TSLB, COM11 */
- { 0x3D, 0x90 }, { 0x3E, 0x02 }, { 0x3F, 0xF2 }, /* COM13, COM14, EDGE */
- { 0x41, 0x02 }, { 0x42, 0xC8 }, /* COM16, COM17 */
- { 0x43, 0xF0 }, { 0x44, 0x10 }, { 0x45, 0x6C }, /* ?, ?, ? */
- { 0x46, 0x6C }, { 0x47, 0x44 }, { 0x48, 0x44 }, /* ?, ?, ? */
- { 0x49, 0x03 }, { 0x59, 0x49 }, { 0x5A, 0x94 }, /* ?, ?, ? */
- { 0x5B, 0x46 }, { 0x5C, 0x84 }, { 0x5D, 0x5C }, /* ?, ?, ? */
- { 0x5E, 0x08 }, { 0x5F, 0x00 }, { 0x60, 0x14 }, /* ?, ?, ? */
- { 0x61, 0xCE }, /* ? */
- { 0x62, 0x70 }, { 0x63, 0x00 }, { 0x64, 0x04 }, /* LCC1, LCC2, LCC3 */
- { 0x65, 0x00 }, { 0x66, 0x00 }, /* LCC4, LCC5 */
- { 0x69, 0x00 }, { 0x6A, 0x3E }, { 0x6B, 0x3F }, /* HV, MBD, DBLV */
- { 0x6C, 0x40 }, { 0x6D, 0x30 }, { 0x6E, 0x4B }, /* GSP1, GSP2, GSP3 */
- { 0x6F, 0x60 }, { 0x70, 0x70 }, { 0x71, 0x70 }, /* GSP4, GSP5, GSP6 */
- { 0x72, 0x70 }, { 0x73, 0x70 }, { 0x74, 0x60 }, /* GSP7, GSP8, GSP9 */
- { 0x75, 0x60 }, { 0x76, 0x50 }, { 0x77, 0x48 }, /* GSP10,GSP11,GSP12 */
- { 0x78, 0x3A }, { 0x79, 0x2E }, { 0x7A, 0x28 }, /* GSP13,GSP14,GSP15 */
- { 0x7B, 0x22 }, { 0x7C, 0x04 }, { 0x7D, 0x07 }, /* GSP16,GST1, GST2 */
- { 0x7E, 0x10 }, { 0x7F, 0x28 }, { 0x80, 0x36 }, /* GST3, GST4, GST5 */
- { 0x81, 0x44 }, { 0x82, 0x52 }, { 0x83, 0x60 }, /* GST6, GST7, GST8 */
- { 0x84, 0x6C }, { 0x85, 0x78 }, { 0x86, 0x8C }, /* GST9, GST10,GST11 */
- { 0x87, 0x9E }, { 0x88, 0xBB }, { 0x89, 0xD2 }, /* GST12,GST13,GST14 */
- { 0x8A, 0xE6 }, { 0x13, 0xaF }, { 0x15, 0x02 }, /* GST15, COM8 */
- { 0x22, 0x8a }, /* GROS */
- { OV9640_REG_TERM, OV9640_VAL_TERM }
-};
-
-static int ov9640_sensor_power_set(int power)
-{
- unsigned char expa;
- int err;
-
- /* read current state of GPIO EXPA outputs */
- err = read_gpio_expa(&expa, 0x27);
- if (err) {
- printk(KERN_ERR "Error reading GPIO EXPA\n");
- return err;
- }
- /* Clear GPIO EXPA P3 (CAMERA_MODULE_EN) to power-up/down sensor */
- if (power)
- expa |= 0x08;
- else
- expa &= ~0x08;
-
- err = write_gpio_expa(expa, 0x27);
- if (err) {
- printk(KERN_ERR "Error writing to GPIO EXPA\n");
- return err;
- }
-
- return err;
-}
-
-static struct v4l2_ifparm ifparm = {
- .if_type = V4L2_IF_TYPE_BT656,
- .u = {
- .bt656 = {
- .frame_start_on_rising_vs = 1,
- .nobt_vs_inv = 1,
- .mode = V4L2_IF_TYPE_BT656_MODE_NOBT_8BIT,
- .clock_min = OV9640_XCLK_MIN,
- .clock_max = OV9640_XCLK_MAX,
- },
- },
-};
-
-static int ov9640_ifparm(struct v4l2_ifparm *p)
-{
- *p = ifparm;
-
- return 0;
-}
-
-static struct ov9640_platform_data h3_ov9640_platform_data = {
- .power_set = ov9640_sensor_power_set,
- .default_regs = ov9640_common,
- .ifparm = ov9640_ifparm,
-};
-#endif
-
-static int h3_pcf_setup(struct i2c_client *client, int gpio,
- unsigned ngpio, void *context)
-{
- int status;
-
- /* REVISIT someone with schematics should look up the rest
- * of these signals, and configure them appropriately ...
- * camera and audio seem to be involved, too.
- */
-
- /* P0 - ? */
- gpio_irda_x = gpio + 0;
- status = gpio_request(gpio_irda_x, "irda_x");
- if (status < 0)
- goto done;
- status = gpio_direction_output(gpio_irda_x, 0);
- if (status < 0)
- goto done;
-
- /* P1 - set if MIR/FIR */
- gpio_irda_fir = gpio + 1;
- status = gpio_request(gpio_irda_fir, "irda_fir");
- if (status < 0)
- goto done;
- status = gpio_direction_output(gpio_irda_fir, 0);
- if (status < 0)
- goto done;
-
- /* 'P6' enable/disable IRDA_TX and IRDA_RX ... default, off */
- gpio_irda_enable = gpio + 6;
- status = gpio_request(gpio_irda_enable, "irda_enable");
- if (status < 0)
- goto done;
- status = gpio_direction_output(gpio_irda_enable, 0);
- if (status < 0)
- goto done;
-
- /* register the IRDA device now that it can be operated */
- status = platform_device_register(&h3_irda_device);
-
-done:
- return status;
-}
-
-static struct pcf857x_platform_data h3_pcf_data = {
- /* assign these GPIO numbers right after the MPUIO lines */
- .gpio_base = OMAP_MAX_GPIO_LINES + 16,
- .setup = h3_pcf_setup,
-};
-