i2c-omap: fix I2C timeouts due to recursive omap_i2c_{un,}idle()

omap_i2c_unidle() and omap_i2c_idle() are called recursively during
omap_i2c_probe().  This is evidently unexpected and will wipe
out the I2C interrupt enable register the second time that
omap_i2c_idle() is called consecutively.  Any I2C transactions
following a probe of a bus with at least one device on it will then
time out.

Fix by moving omap_i2c_idle() further up in omap_i2c_probe().  Ensure
the I2C controller is marked as idle before the probe starts.  Also
attempt to catch future reappearances of this bug early in development
by warning in omap_i2c_{un,}idle() when they are called recursively.

Problem reported by David Brownell <david-b@pacbell.net>.

Tested on 3430SDP and 2430SDP.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Acked-by; Steve Sakoman <steve@sakoman.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 4aeebad8ec93b8ef543efb77101536a91910916b..40a1e4bc92f189b8127f6ae38a4f90a12b83282f 100644 (file)
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -191,6 +191,8 @@ static void omap_i2c_put_clocks(struct omap_i2c_dev *dev)
 
 static void omap_i2c_unidle(struct omap_i2c_dev *dev)
 {
+       WARN_ON(!dev->idle);
+
        if (dev->iclk != NULL)
                clk_enable(dev->iclk);
        clk_enable(dev->fclk);
@@ -203,6 +205,8 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
 {
        u16 iv;
 
+       WARN_ON(dev->idle);
+
        dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
        omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
        if (dev->rev1) {
@@ -740,6 +744,7 @@ omap_i2c_probe(struct platform_device *pdev)
                speed = 100;    /* Defualt speed */
 
        dev->speed = speed;
+       dev->idle = 1;
        dev->dev = &pdev->dev;
        dev->irq = irq->start;
        dev->base = ioremap(mem->start, mem->end - mem->start + 1);
@@ -788,6 +793,8 @@ omap_i2c_probe(struct platform_device *pdev)
        dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n",
                 pdev->id, r >> 4, r & 0xf, dev->speed);
 
+       omap_i2c_idle(dev);
+
        adap = &dev->adapter;
        i2c_set_adapdata(adap, dev);
        adap->owner = THIS_MODULE;
@@ -804,8 +811,6 @@ omap_i2c_probe(struct platform_device *pdev)
                goto err_free_irq;
        }
 
-       omap_i2c_idle(dev);
-
        return 0;
 
 err_free_irq: