documentation: move spidev_fdx example to its own source file

Move sample source code to its own source file so that it can be used
easier and build-tested/check/maintained by anyone.

(Makefile changes are in a separate patch for all of Documentation/.)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/Documentation/spi/spidev b/Documentation/spi/spidev
index 5c8e1b988a0825708e85b1153239d6fb431b05e2..ed2da5e5b28a4490a3b03787b02df66d083692be 100644 (file)
--- a/Documentation/spi/spidev
+++ b/Documentation/spi/spidev
@@ -126,8 +126,8 @@ NOTES:
 FULL DUPLEX CHARACTER DEVICE API
 ================================
 
-See the sample program below for one example showing the use of the full
-duplex programming interface.  (Although it doesn't perform a full duplex
+See the spidev_fdx.c sample program for one example showing the use of the
+full duplex programming interface.  (Although it doesn't perform a full duplex
 transfer.)  The model is the same as that used in the kernel spi_sync()
 request; the individual transfers offer the same capabilities as are
 available to kernel drivers (except that it's not asynchronous).
@@ -141,167 +141,3 @@ and bitrate for each transfer segment.)
 
 To make a full duplex request, provide both rx_buf and tx_buf for the
 same transfer.  It's even OK if those are the same buffer.
-
-
-SAMPLE PROGRAM
-==============
-
---------------------------------       CUT HERE
-#include <stdio.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <fcntl.h>
-#include <string.h>
-
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-
-#include <linux/types.h>
-#include <linux/spi/spidev.h>
-
-
-static int verbose;
-
-static void do_read(int fd, int len)
-{
-       unsigned char   buf[32], *bp;
-       int             status;
-
-       /* read at least 2 bytes, no more than 32 */
-       if (len < 2)
-               len = 2;
-       else if (len > sizeof(buf))
-               len = sizeof(buf);
-       memset(buf, 0, sizeof buf);
-
-       status = read(fd, buf, len);
-       if (status < 0) {
-               perror("read");
-               return;
-       }
-       if (status != len) {
-               fprintf(stderr, "short read\n");
-               return;
-       }
-
-       printf("read(%2d, %2d): %02x %02x,", len, status,
-               buf[0], buf[1]);
-       status -= 2;
-       bp = buf + 2;
-       while (status-- > 0)
-               printf(" %02x", *bp++);
-       printf("\n");
-}
-
-static void do_msg(int fd, int len)
-{
-       struct spi_ioc_transfer xfer[2];
-       unsigned char           buf[32], *bp;
-       int                     status;
-
-       memset(xfer, 0, sizeof xfer);
-       memset(buf, 0, sizeof buf);
-
-       if (len > sizeof buf)
-               len = sizeof buf;
-
-       buf[0] = 0xaa;
-       xfer[0].tx_buf = (__u64) buf;
-       xfer[0].len = 1;
-
-       xfer[1].rx_buf = (__u64) buf;
-       xfer[1].len = len;
-
-       status = ioctl(fd, SPI_IOC_MESSAGE(2), xfer);
-       if (status < 0) {
-               perror("SPI_IOC_MESSAGE");
-               return;
-       }
-
-       printf("response(%2d, %2d): ", len, status);
-       for (bp = buf; len; len--)
-               printf(" %02x", *bp++);
-       printf("\n");
-}
-
-static void dumpstat(const char *name, int fd)
-{
-       __u8    mode, lsb, bits;
-       __u32   speed;
-
-       if (ioctl(fd, SPI_IOC_RD_MODE, &mode) < 0) {
-               perror("SPI rd_mode");
-               return;
-       }
-       if (ioctl(fd, SPI_IOC_RD_LSB_FIRST, &lsb) < 0) {
-               perror("SPI rd_lsb_fist");
-               return;
-       }
-       if (ioctl(fd, SPI_IOC_RD_BITS_PER_WORD, &bits) < 0) {
-               perror("SPI bits_per_word");
-               return;
-       }
-       if (ioctl(fd, SPI_IOC_RD_MAX_SPEED_HZ, &speed) < 0) {
-               perror("SPI max_speed_hz");
-               return;
-       }
-
-       printf("%s: spi mode %d, %d bits %sper word, %d Hz max\n",
-               name, mode, bits, lsb ? "(lsb first) " : "", speed);
-}
-
-int main(int argc, char **argv)
-{
-       int             c;
-       int             readcount = 0;
-       int             msglen = 0;
-       int             fd;
-       const char      *name;
-
-       while ((c = getopt(argc, argv, "hm:r:v")) != EOF) {
-               switch (c) {
-               case 'm':
-                       msglen = atoi(optarg);
-                       if (msglen < 0)
-                               goto usage;
-                       continue;
-               case 'r':
-                       readcount = atoi(optarg);
-                       if (readcount < 0)
-                               goto usage;
-                       continue;
-               case 'v':
-                       verbose++;
-                       continue;
-               case 'h':
-               case '?':
-usage:
-                       fprintf(stderr,
-                               "usage: %s [-h] [-m N] [-r N] /dev/spidevB.D\n",
-                               argv[0]);
-                       return 1;
-               }
-       }
-
-       if ((optind + 1) != argc)
-               goto usage;
-       name = argv[optind];
-
-       fd = open(name, O_RDWR);
-       if (fd < 0) {
-               perror("open");
-               return 1;
-       }
-
-       dumpstat(name, fd);
-
-       if (msglen)
-               do_msg(fd, msglen);
-
-       if (readcount)
-               do_read(fd, readcount);
-
-       close(fd);
-       return 0;
-}

diff --git a/Documentation/spi/spidev_fdx.c b/Documentation/spi/spidev_fdx.c
new file mode 100644 (file)
index 0000000..fc354f7
--- /dev/null
+++ b/Documentation/spi/spidev_fdx.c
@@ -0,0 +1,158 @@
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#include <string.h>
+
+#include <sys/ioctl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#include <linux/types.h>
+#include <linux/spi/spidev.h>
+
+
+static int verbose;
+
+static void do_read(int fd, int len)
+{
+       unsigned char   buf[32], *bp;
+       int             status;
+
+       /* read at least 2 bytes, no more than 32 */
+       if (len < 2)
+               len = 2;
+       else if (len > sizeof(buf))
+               len = sizeof(buf);
+       memset(buf, 0, sizeof buf);
+
+       status = read(fd, buf, len);
+       if (status < 0) {
+               perror("read");
+               return;
+       }
+       if (status != len) {
+               fprintf(stderr, "short read\n");
+               return;
+       }
+
+       printf("read(%2d, %2d): %02x %02x,", len, status,
+               buf[0], buf[1]);
+       status -= 2;
+       bp = buf + 2;
+       while (status-- > 0)
+               printf(" %02x", *bp++);
+       printf("\n");
+}
+
+static void do_msg(int fd, int len)
+{
+       struct spi_ioc_transfer xfer[2];
+       unsigned char           buf[32], *bp;
+       int                     status;
+
+       memset(xfer, 0, sizeof xfer);
+       memset(buf, 0, sizeof buf);
+
+       if (len > sizeof buf)
+               len = sizeof buf;
+
+       buf[0] = 0xaa;
+       xfer[0].tx_buf = (__u64) buf;
+       xfer[0].len = 1;
+
+       xfer[1].rx_buf = (__u64) buf;
+       xfer[1].len = len;
+
+       status = ioctl(fd, SPI_IOC_MESSAGE(2), xfer);
+       if (status < 0) {
+               perror("SPI_IOC_MESSAGE");
+               return;
+       }
+
+       printf("response(%2d, %2d): ", len, status);
+       for (bp = buf; len; len--)
+               printf(" %02x", *bp++);
+       printf("\n");
+}
+
+static void dumpstat(const char *name, int fd)
+{
+       __u8    mode, lsb, bits;
+       __u32   speed;
+
+       if (ioctl(fd, SPI_IOC_RD_MODE, &mode) < 0) {
+               perror("SPI rd_mode");
+               return;
+       }
+       if (ioctl(fd, SPI_IOC_RD_LSB_FIRST, &lsb) < 0) {
+               perror("SPI rd_lsb_fist");
+               return;
+       }
+       if (ioctl(fd, SPI_IOC_RD_BITS_PER_WORD, &bits) < 0) {
+               perror("SPI bits_per_word");
+               return;
+       }
+       if (ioctl(fd, SPI_IOC_RD_MAX_SPEED_HZ, &speed) < 0) {
+               perror("SPI max_speed_hz");
+               return;
+       }
+
+       printf("%s: spi mode %d, %d bits %sper word, %d Hz max\n",
+               name, mode, bits, lsb ? "(lsb first) " : "", speed);
+}
+
+int main(int argc, char **argv)
+{
+       int             c;
+       int             readcount = 0;
+       int             msglen = 0;
+       int             fd;
+       const char      *name;
+
+       while ((c = getopt(argc, argv, "hm:r:v")) != EOF) {
+               switch (c) {
+               case 'm':
+                       msglen = atoi(optarg);
+                       if (msglen < 0)
+                               goto usage;
+                       continue;
+               case 'r':
+                       readcount = atoi(optarg);
+                       if (readcount < 0)
+                               goto usage;
+                       continue;
+               case 'v':
+                       verbose++;
+                       continue;
+               case 'h':
+               case '?':
+usage:
+                       fprintf(stderr,
+                               "usage: %s [-h] [-m N] [-r N] /dev/spidevB.D\n",
+                               argv[0]);
+                       return 1;
+               }
+       }
+
+       if ((optind + 1) != argc)
+               goto usage;
+       name = argv[optind];
+
+       fd = open(name, O_RDWR);
+       if (fd < 0) {
+               perror("open");
+               return 1;
+       }
+
+       dumpstat(name, fd);
+
+       if (msglen)
+               do_msg(fd, msglen);
+
+       if (readcount)
+               do_read(fd, readcount);
+
+       close(fd);
+       return 0;
+}