#include <asm/ptrace.h>
#include <asm/page.h>
#include <asm/lppaca.h>
-#include <asm/iseries/it_lp_reg_save.h>
#include <asm/paca.h>
#include <asm/mmu.h>
extern unsigned long __toc_start;
/*
- * iSeries structure which the hypervisor knows about - this structure
+ * The structure which the hypervisor knows about - this structure
* should not cross a page boundary. The vpa_init/register_vpa call
* is now known to fail if the lppaca structure crosses a page
- * boundary. The lppaca is also used on POWER5 pSeries boxes. The
- * lppaca is 640 bytes long, and cannot readily change since the
- * hypervisor knows its layout, so a 1kB alignment will suffice to
- * ensure that it doesn't cross a page boundary.
+ * boundary. The lppaca is also used on legacy iSeries and POWER5
+ * pSeries boxes. The lppaca is 640 bytes long, and cannot readily
+ * change since the hypervisor knows its layout, so a 1kB alignment
+ * will suffice to ensure that it doesn't cross a page boundary.
*/
struct lppaca lppaca[] = {
[0 ... (NR_CPUS-1)] = {
* processors. The processor VPD array needs one entry per physical
* processor (not thread).
*/
-#define PACA_INIT_COMMON(number) \
+#define PACA_INIT(number) \
+{ \
.lppaca_ptr = &lppaca[number], \
.lock_token = 0x8000, \
.paca_index = (number), /* Paca Index */ \
.kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL, \
.hw_cpu_id = 0xffff, \
- .slb_shadow_ptr = &slb_shadow[number],
-
-#ifdef CONFIG_PPC_ISERIES
-#define PACA_INIT_ISERIES(number) \
- .reg_save_ptr = &iseries_reg_save[number],
-
-#define PACA_INIT(number) \
-{ \
- PACA_INIT_COMMON(number) \
- PACA_INIT_ISERIES(number) \
+ .slb_shadow_ptr = &slb_shadow[number], \
}
-#else
-#define PACA_INIT(number) \
-{ \
- PACA_INIT_COMMON(number) \
-}
-
-#endif
-
struct paca_struct paca[] = {
PACA_INIT(0),
#if NR_CPUS > 1
#include <asm/ptrace.h>
#include <asm/abs_addr.h>
#include <asm/lppaca.h>
-#include <asm/iseries/it_lp_reg_save.h>
#include <asm/paca.h>
#include <asm/iseries/lpar_map.h>
#include <asm/iseries/it_lp_queue.h>
.xRamDiskSize = 0,
};
+struct ItLpRegSave {
+ u32 xDesc; // Eye catcher "LpRS" ebcdic 000-003
+ u16 xSize; // Size of this class 004-005
+ u8 xInUse; // Area is live 006-007
+ u8 xRsvd1[9]; // Reserved 007-00F
+
+ u8 xFixedRegSave[352]; // Fixed Register Save Area 010-16F
+ u32 xCTRL; // Control Register 170-173
+ u32 xDEC; // Decrementer 174-177
+ u32 xFPSCR; // FP Status and Control Reg 178-17B
+ u32 xPVR; // Processor Version Number 17C-17F
+
+ u64 xMMCR0; // Monitor Mode Control Reg 0 180-187
+ u32 xPMC1; // Perf Monitor Counter 1 188-18B
+ u32 xPMC2; // Perf Monitor Counter 2 18C-18F
+ u32 xPMC3; // Perf Monitor Counter 3 190-193
+ u32 xPMC4; // Perf Monitor Counter 4 194-197
+ u32 xPIR; // Processor ID Reg 198-19B
+
+ u32 xMMCR1; // Monitor Mode Control Reg 1 19C-19F
+ u32 xMMCRA; // Monitor Mode Control Reg A 1A0-1A3
+ u32 xPMC5; // Perf Monitor Counter 5 1A4-1A7
+ u32 xPMC6; // Perf Monitor Counter 6 1A8-1AB
+ u32 xPMC7; // Perf Monitor Counter 7 1AC-1AF
+ u32 xPMC8; // Perf Monitor Counter 8 1B0-1B3
+ u32 xTSC; // Thread Switch Control 1B4-1B7
+ u32 xTST; // Thread Switch Timeout 1B8-1BB
+ u32 xRsvd; // Reserved 1BC-1BF
+
+ u64 xACCR; // Address Compare Control Reg 1C0-1C7
+ u64 xIMR; // Instruction Match Register 1C8-1CF
+ u64 xSDR1; // Storage Description Reg 1 1D0-1D7
+ u64 xSPRG0; // Special Purpose Reg General0 1D8-1DF
+ u64 xSPRG1; // Special Purpose Reg General1 1E0-1E7
+ u64 xSPRG2; // Special Purpose Reg General2 1E8-1EF
+ u64 xSPRG3; // Special Purpose Reg General3 1F0-1F7
+ u64 xTB; // Time Base Register 1F8-1FF
+
+ u64 xFPR[32]; // Floating Point Registers 200-2FF
+
+ u64 xMSR; // Machine State Register 300-307
+ u64 xNIA; // Next Instruction Address 308-30F
+
+ u64 xDABR; // Data Address Breakpoint Reg 310-317
+ u64 xIABR; // Inst Address Breakpoint Reg 318-31F
+
+ u64 xHID0; // HW Implementation Dependent0 320-327
+
+ u64 xHID4; // HW Implementation Dependent4 328-32F
+ u64 xSCOMd; // SCON Data Reg (SPRG4) 330-337
+ u64 xSCOMc; // SCON Command Reg (SPRG5) 338-33F
+ u64 xSDAR; // Sample Data Address Register 340-347
+ u64 xSIAR; // Sample Inst Address Register 348-34F
+
+ u8 xRsvd3[176]; // Reserved 350-3FF
+};
+
extern void system_reset_iSeries(void);
extern void machine_check_iSeries(void);
extern void data_access_iSeries(void);
.xFormat = 1,
};
+static struct ItLpRegSave iseries_reg_save[] = {
+ [0 ... (NR_CPUS-1)] = {
+ .xDesc = 0xd397d9e2, /* "LpRS" */
+ .xSize = sizeof(struct ItLpRegSave),
+ },
+};
+
#define ALPACA_INIT(number) \
{ \
.lppaca_ptr = &lppaca[number], \
0,0
}
};
-
-struct ItLpRegSave iseries_reg_save[] = {
- [0 ... (NR_CPUS-1)] = {
- .xDesc = 0xd397d9e2, /* "LpRS" */
- .xSize = sizeof(struct ItLpRegSave),
- },
-};
#ifdef CONFIG_PPC64
#include <asm/hvcall.h>
#include <asm/paca.h>
-#include <asm/iseries/it_lp_reg_save.h>
#endif
#include "nonstdio.h"
if (firmware_has_feature(FW_FEATURE_ISERIES)) {
struct paca_struct *ptrPaca;
struct lppaca *ptrLpPaca;
- struct ItLpRegSave *ptrLpRegSave;
/* Dump out relevant Paca data areas. */
printf("Paca: \n");
printf(" Saved Gpr3=%.16lx Saved Gpr4=%.16lx \n",
ptrLpPaca->saved_gpr3, ptrLpPaca->saved_gpr4);
printf(" Saved Gpr5=%.16lx \n", ptrLpPaca->saved_gpr5);
-
- printf(" Local Processor Register Save Area (LpRegSave): \n");
- ptrLpRegSave = ptrPaca->reg_save_ptr;
- printf(" Saved Sprg0=%.16lx Saved Sprg1=%.16lx \n",
- ptrLpRegSave->xSPRG0, ptrLpRegSave->xSPRG0);
- printf(" Saved Sprg2=%.16lx Saved Sprg3=%.16lx \n",
- ptrLpRegSave->xSPRG2, ptrLpRegSave->xSPRG3);
- printf(" Saved Msr =%.16lx Saved Nia =%.16lx \n",
- ptrLpRegSave->xMSR, ptrLpRegSave->xNIA);
}
#endif
+++ /dev/null
-/*
- * Copyright (C) 2001 Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H
-#define _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H
-
-/*
- * This control block contains the data that is shared between PLIC
- * and the OS
- */
-
-struct ItLpRegSave {
- u32 xDesc; // Eye catcher "LpRS" ebcdic 000-003
- u16 xSize; // Size of this class 004-005
- u8 xInUse; // Area is live 006-007
- u8 xRsvd1[9]; // Reserved 007-00F
-
- u8 xFixedRegSave[352]; // Fixed Register Save Area 010-16F
- u32 xCTRL; // Control Register 170-173
- u32 xDEC; // Decrementer 174-177
- u32 xFPSCR; // FP Status and Control Reg 178-17B
- u32 xPVR; // Processor Version Number 17C-17F
-
- u64 xMMCR0; // Monitor Mode Control Reg 0 180-187
- u32 xPMC1; // Perf Monitor Counter 1 188-18B
- u32 xPMC2; // Perf Monitor Counter 2 18C-18F
- u32 xPMC3; // Perf Monitor Counter 3 190-193
- u32 xPMC4; // Perf Monitor Counter 4 194-197
- u32 xPIR; // Processor ID Reg 198-19B
-
- u32 xMMCR1; // Monitor Mode Control Reg 1 19C-19F
- u32 xMMCRA; // Monitor Mode Control Reg A 1A0-1A3
- u32 xPMC5; // Perf Monitor Counter 5 1A4-1A7
- u32 xPMC6; // Perf Monitor Counter 6 1A8-1AB
- u32 xPMC7; // Perf Monitor Counter 7 1AC-1AF
- u32 xPMC8; // Perf Monitor Counter 8 1B0-1B3
- u32 xTSC; // Thread Switch Control 1B4-1B7
- u32 xTST; // Thread Switch Timeout 1B8-1BB
- u32 xRsvd; // Reserved 1BC-1BF
-
- u64 xACCR; // Address Compare Control Reg 1C0-1C7
- u64 xIMR; // Instruction Match Register 1C8-1CF
- u64 xSDR1; // Storage Description Reg 1 1D0-1D7
- u64 xSPRG0; // Special Purpose Reg General0 1D8-1DF
- u64 xSPRG1; // Special Purpose Reg General1 1E0-1E7
- u64 xSPRG2; // Special Purpose Reg General2 1E8-1EF
- u64 xSPRG3; // Special Purpose Reg General3 1F0-1F7
- u64 xTB; // Time Base Register 1F8-1FF
-
- u64 xFPR[32]; // Floating Point Registers 200-2FF
-
- u64 xMSR; // Machine State Register 300-307
- u64 xNIA; // Next Instruction Address 308-30F
-
- u64 xDABR; // Data Address Breakpoint Reg 310-317
- u64 xIABR; // Inst Address Breakpoint Reg 318-31F
-
- u64 xHID0; // HW Implementation Dependent0 320-327
-
- u64 xHID4; // HW Implementation Dependent4 328-32F
- u64 xSCOMd; // SCON Data Reg (SPRG4) 330-337
- u64 xSCOMc; // SCON Command Reg (SPRG5) 338-33F
- u64 xSDAR; // Sample Data Address Register 340-347
- u64 xSIAR; // Sample Inst Address Register 348-34F
-
- u8 xRsvd3[176]; // Reserved 350-3FF
-};
-
-extern struct ItLpRegSave iseries_reg_save[];
-
-#endif /* _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H */
* Defines the layout of the paca.
*
* This structure is not directly accessed by firmware or the service
- * processor except for the first two pointers that point to the
- * lppaca area and the ItLpRegSave area for this CPU. The lppaca
- * object is currently contained within the PACA but it doesn't need
- * to be.
+ * processor.
*/
struct paca_struct {
/*
* avoid cacheline bouncing.
*/
- /*
- * MAGIC: These first two pointers can't be moved - they're
- * accessed by the firmware
- */
struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */
-#ifdef CONFIG_PPC_ISERIES
- void *reg_save_ptr; /* Pointer to LpRegSave for PLIC */
-#endif /* CONFIG_PPC_ISERIES */
/*
* MAGIC: the spinlock functions in arch/powerpc/lib/locks.c
projects / linux-2.6-omap-h63xx.git / commitdiff