]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
[MTD] [MAPS] Blackfin Async Flash Maps
authorMike Frysinger <vapier.adi@gmail.com>
Mon, 19 May 2008 10:32:24 +0000 (18:32 +0800)
committerDavid Woodhouse <dwmw2@infradead.org>
Wed, 4 Jun 2008 16:57:23 +0000 (17:57 +0100)
Handle the case where flash memory and ethernet mac/phy are mapped onto
the same async bank

[try #4]
 - drop superfluous casts
 - drop SSYNC() when reading from the flash and rewrite
   bfin_copy_from() to be like bfin_copy_to() so that
   we dont have to handle all the aligned/unaligned cases

[try #3] rename bf5xx-flash to bfin-async-flash
 - move all kconfig board settings into board resources
 - fixup casting style according to lkml feedback
 - rewrite driver so that it can handle arbitrary of
   instances according to the declared platform resources

[try #2]
Remove useless SSYNC() as Will said

[try #1]
The BF533-STAMP does this for example.
All board-specific configuration goes in your board resources file.

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Acked-By: Jörn Engel <joern@logfs.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
drivers/mtd/maps/Kconfig
drivers/mtd/maps/Makefile
drivers/mtd/maps/bfin-async-flash.c [new file with mode: 0644]

index b2c180245618bdd5c7ea26bcd73a2f2aa1c9b937..02c45e1e24eeb6de7ed7eb9d6e947d3e48faf7ea 100644 (file)
@@ -523,6 +523,17 @@ config MTD_PCMCIA_ANONYMOUS
 
          If unsure, say N.
 
+config MTD_BFIN_ASYNC
+       tristate "Blackfin BF533-STAMP Flash Chip Support"
+       depends on BFIN533_STAMP && MTD_CFI
+       select MTD_PARTITIONS
+       default y
+       help
+         Map driver which allows for simultaneous utilization of
+         ethernet and CFI parallel flash.
+
+         If compiled as a module, it will be called bfin-async-flash.
+
 config MTD_UCLINUX
        tristate "Generic uClinux RAM/ROM filesystem support"
        depends on MTD_PARTITIONS && !MMU
index 5444eaf4026f4347a6a3672f112d1dd42f04212f..d6cfce490583399b5fd227ab126e08cfa74e10f0 100644 (file)
@@ -67,3 +67,4 @@ obj-$(CONFIG_MTD_PLATRAM)     += plat-ram.o
 obj-$(CONFIG_MTD_OMAP_NOR)     += omap_nor.o
 obj-$(CONFIG_MTD_MTX1)         += mtx-1_flash.o
 obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o
+obj-$(CONFIG_MTD_BFIN_ASYNC)   += bfin-async-flash.o
diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c
new file mode 100644 (file)
index 0000000..6fec86a
--- /dev/null
@@ -0,0 +1,219 @@
+/*
+ * drivers/mtd/maps/bfin-async-flash.c
+ *
+ * Handle the case where flash memory and ethernet mac/phy are
+ * mapped onto the same async bank.  The BF533-STAMP does this
+ * for example.  All board-specific configuration goes in your
+ * board resources file.
+ *
+ * Copyright 2000 Nicolas Pitre <nico@cam.org>
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <asm/blackfin.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <asm/unaligned.h>
+
+#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
+
+#define DRIVER_NAME "bfin-async-flash"
+
+struct async_state {
+       struct mtd_info *mtd;
+       struct map_info map;
+       int enet_flash_pin;
+       uint32_t flash_ambctl0, flash_ambctl1;
+       uint32_t save_ambctl0, save_ambctl1;
+       unsigned long irq_flags;
+};
+
+static void switch_to_flash(struct async_state *state)
+{
+       local_irq_save(state->irq_flags);
+
+       gpio_set_value(state->enet_flash_pin, 0);
+
+       state->save_ambctl0 = bfin_read_EBIU_AMBCTL0();
+       state->save_ambctl1 = bfin_read_EBIU_AMBCTL1();
+       bfin_write_EBIU_AMBCTL0(state->flash_ambctl0);
+       bfin_write_EBIU_AMBCTL1(state->flash_ambctl1);
+       SSYNC();
+}
+
+static void switch_back(struct async_state *state)
+{
+       bfin_write_EBIU_AMBCTL0(state->save_ambctl0);
+       bfin_write_EBIU_AMBCTL1(state->save_ambctl1);
+       SSYNC();
+
+       gpio_set_value(state->enet_flash_pin, 1);
+
+       local_irq_restore(state->irq_flags);
+}
+
+static map_word bfin_read(struct map_info *map, unsigned long ofs)
+{
+       struct async_state *state = (struct async_state *)map->map_priv_1;
+       uint16_t word;
+       map_word test;
+
+       switch_to_flash(state);
+
+       word = readw(map->virt + ofs);
+
+       switch_back(state);
+
+       test.x[0] = word;
+       return test;
+}
+
+static void bfin_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+       struct async_state *state = (struct async_state *)map->map_priv_1;
+
+       switch_to_flash(state);
+
+       memcpy(to, map->virt + from, len);
+
+       switch_back(state);
+}
+
+static void bfin_write(struct map_info *map, map_word d1, unsigned long ofs)
+{
+       struct async_state *state = (struct async_state *)map->map_priv_1;
+       uint16_t d;
+
+       d = d1.x[0];
+
+       switch_to_flash(state);
+
+       writew(d, map->virt + ofs);
+       SSYNC();
+
+       switch_back(state);
+}
+
+static void bfin_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+       struct async_state *state = (struct async_state *)map->map_priv_1;
+
+       switch_to_flash(state);
+
+       memcpy(map->virt + to, from, len);
+       SSYNC();
+
+       switch_back(state);
+}
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+#endif
+
+static int __devinit bfin_flash_probe(struct platform_device *pdev)
+{
+       int ret;
+       struct physmap_flash_data *pdata = pdev->dev.platform_data;
+       struct resource *memory = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       struct resource *flash_ambctl = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+       struct async_state *state;
+
+       state = kzalloc(sizeof(*state), GFP_KERNEL);
+       if (!state)
+               return -ENOMEM;
+
+       state->map.name       = DRIVER_NAME;
+       state->map.read       = bfin_read;
+       state->map.copy_from  = bfin_copy_from;
+       state->map.write      = bfin_write;
+       state->map.copy_to    = bfin_copy_to;
+       state->map.bankwidth  = pdata->width;
+       state->map.size       = memory->end - memory->start + 1;
+       state->map.virt       = (void __iomem *)memory->start;
+       state->map.phys       = memory->start;
+       state->map.map_priv_1 = (unsigned long)state;
+       state->enet_flash_pin = platform_get_irq(pdev, 0);
+       state->flash_ambctl0  = flash_ambctl->start;
+       state->flash_ambctl1  = flash_ambctl->end;
+
+       if (gpio_request(state->enet_flash_pin, DRIVER_NAME)) {
+               pr_devinit(KERN_ERR DRIVER_NAME ": Failed to request gpio %d\n", state->enet_flash_pin);
+               return -EBUSY;
+       }
+       gpio_direction_output(state->enet_flash_pin, 1);
+
+       pr_devinit(KERN_NOTICE DRIVER_NAME ": probing %d-bit flash bus\n", state->map.bankwidth * 8);
+       state->mtd = do_map_probe(memory->name, &state->map);
+       if (!state->mtd)
+               return -ENXIO;
+
+#ifdef CONFIG_MTD_PARTITIONS
+       ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);
+       if (ret > 0) {
+               pr_devinit(KERN_NOTICE DRIVER_NAME ": Using commandline partition definition\n");
+               add_mtd_partitions(state->mtd, pdata->parts, ret);
+
+       } else if (pdata->nr_parts) {
+               pr_devinit(KERN_NOTICE DRIVER_NAME ": Using board partition definition\n");
+               add_mtd_partitions(state->mtd, pdata->parts, pdata->nr_parts);
+
+       } else
+#endif
+       {
+               pr_devinit(KERN_NOTICE DRIVER_NAME ": no partition info available, registering whole flash at once\n");
+               add_mtd_device(state->mtd);
+       }
+
+       platform_set_drvdata(pdev, state);
+
+       return 0;
+}
+
+static int __devexit bfin_flash_remove(struct platform_device *pdev)
+{
+       struct async_state *state = platform_get_drvdata(pdev);
+       gpio_free(state->enet_flash_pin);
+#ifdef CONFIG_MTD_PARTITIONS
+       del_mtd_partitions(state->mtd);
+#endif
+       map_destroy(state->mtd);
+       kfree(state);
+       return 0;
+}
+
+static struct platform_driver bfin_flash_driver = {
+       .probe          = bfin_flash_probe,
+       .remove         = __devexit_p(bfin_flash_remove),
+       .driver         = {
+               .name   = DRIVER_NAME,
+       },
+};
+
+static int __init bfin_flash_init(void)
+{
+       return platform_driver_register(&bfin_flash_driver);
+}
+module_init(bfin_flash_init);
+
+static void __exit bfin_flash_exit(void)
+{
+       platform_driver_unregister(&bfin_flash_driver);
+}
+module_exit(bfin_flash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MTD map driver for Blackfins with flash/ethernet on same async bank");