]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
atl1: header file cleanup
authorJay Cliburn <jacliburn@bellsouth.net>
Sun, 15 Jul 2007 16:03:26 +0000 (11:03 -0500)
committerJeff Garzik <jeff@garzik.org>
Mon, 16 Jul 2007 22:29:16 +0000 (18:29 -0400)
Remove unused structure members, improve comments, break long comment lines,
rename a constant to be consistent with others in the file.

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/net/atl1/atl1.h
drivers/net/atl1/atl1_main.c

index a769e7b8b80b673bb0fdfc2d0a169b76085b8fa3..991c8b93d3862886f50e01a573500e917f5ad2bb 100644 (file)
@@ -43,6 +43,7 @@ extern const struct ethtool_ops atl1_ethtool_ops;
 struct atl1_adapter;
 
 #define ATL1_MAX_INTR          3
+#define ATL1_MAX_TX_BUF_LEN    0x3000  /* 12288 bytes */
 
 #define ATL1_DEFAULT_TPD       256
 #define ATL1_MAX_TPD           1024
@@ -57,29 +58,45 @@ struct atl1_adapter;
 #define ATL1_RRD_DESC(R, i)    ATL1_GET_DESC(R, i, struct rx_return_desc)
 
 /*
+ * This detached comment is preserved for documentation purposes only.
+ * It was originally attached to some code that got deleted, but seems
+ * important enough to keep around...
+ *
+ * <begin detached comment>
  * Some workarounds require millisecond delays and are run during interrupt
  * context.  Most notably, when establishing link, the phy may need tweaking
  * but cannot process phy register reads/writes faster than millisecond
  * intervals...and we establish link due to a "link status change" interrupt.
+ * <end detached comment>
+ */
+
+/*
+ * atl1_ring_header represents a single, contiguous block of DMA space
+ * mapped for the three descriptor rings (tpd, rfd, rrd) and the two
+ * message blocks (cmb, smb) described below
  */
+struct atl1_ring_header {
+       void *desc;             /* virtual address */
+       dma_addr_t dma;         /* physical address*/
+       unsigned int size;      /* length in bytes */
+};
 
 /*
- * wrapper around a pointer to a socket buffer,
- * so a DMA handle can be stored along with the buffer
+ * atl1_buffer is wrapper around a pointer to a socket buffer
+ * so a DMA handle can be stored along with the skb
  */
 struct atl1_buffer {
-       struct sk_buff *skb;
-       u16 length;
-       u16 alloced;
+       struct sk_buff *skb;    /* socket buffer */
+       u16 length;             /* rx buffer length */
+       u16 alloced;            /* 1 if skb allocated */
        dma_addr_t dma;
 };
 
-#define MAX_TX_BUF_LEN         0x3000  /* 12KB */
-
+/* transmit packet descriptor (tpd) ring */
 struct atl1_tpd_ring {
-       void *desc;             /* pointer to the descriptor ring memory */
-       dma_addr_t dma;         /* physical adress of the descriptor ring */
-       u16 size;               /* length of descriptor ring in bytes */
+       void *desc;             /* descriptor ring virtual address */
+       dma_addr_t dma;         /* descriptor ring physical address */
+       u16 size;               /* descriptor ring length in bytes */
        u16 count;              /* number of descriptors in the ring */
        u16 hw_idx;             /* hardware index */
        atomic_t next_to_clean;
@@ -87,36 +104,34 @@ struct atl1_tpd_ring {
        struct atl1_buffer *buffer_info;
 };
 
+/* receive free descriptor (rfd) ring */
 struct atl1_rfd_ring {
-       void *desc;
-       dma_addr_t dma;
-       u16 size;
-       u16 count;
+       void *desc;             /* descriptor ring virtual address */
+       dma_addr_t dma;         /* descriptor ring physical address */
+       u16 size;               /* descriptor ring length in bytes */
+       u16 count;              /* number of descriptors in the ring */
        atomic_t next_to_use;
        u16 next_to_clean;
        struct atl1_buffer *buffer_info;
 };
 
+/* receive return descriptor (rrd) ring */
 struct atl1_rrd_ring {
-       void *desc;
-       dma_addr_t dma;
-       unsigned int size;
-       u16 count;
+       void *desc;             /* descriptor ring virtual address */
+       dma_addr_t dma;         /* descriptor ring physical address */
+       unsigned int size;      /* descriptor ring length in bytes */
+       u16 count;              /* number of descriptors in the ring */
        u16 next_to_use;
        atomic_t next_to_clean;
 };
 
-struct atl1_ring_header {
-       void *desc;             /* pointer to the descriptor ring memory */
-       dma_addr_t dma;         /* physical adress of the descriptor ring */
-       unsigned int size;      /* length of descriptor ring in bytes */
-};
-
+/* coalescing message block (cmb) */
 struct atl1_cmb {
        struct coals_msg_block *cmb;
        dma_addr_t dma;
 };
 
+/* statistics message block (smb) */
 struct atl1_smb {
        struct stats_msg_block *smb;
        dma_addr_t dma;
@@ -141,24 +156,26 @@ struct atl1_sft_stats {
        u64 tx_aborted_errors;
        u64 tx_window_errors;
        u64 tx_carrier_errors;
-
-       u64 tx_pause;           /* num Pause packet transmitted. */
-       u64 excecol;            /* num tx packets aborted due to excessive collisions. */
-       u64 deffer;             /* num deferred tx packets */
-       u64 scc;                /* num packets subsequently transmitted successfully w/ single prior collision. */
-       u64 mcc;                /* num packets subsequently transmitted successfully w/ multiple prior collisions. */
+       u64 tx_pause;           /* num pause packets transmitted. */
+       u64 excecol;            /* num tx packets w/ excessive collisions. */
+       u64 deffer;             /* num tx packets deferred */
+       u64 scc;                /* num packets subsequently transmitted
+                                * successfully w/ single prior collision. */
+       u64 mcc;                /* num packets subsequently transmitted
+                                * successfully w/ multiple prior collisions. */
        u64 latecol;            /* num tx packets  w/ late collisions. */
-       u64 tx_underun;         /* num tx packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */
-       u64 tx_trunc;           /* num tx packets truncated due to size exceeding MTU, regardless whether truncated by Selene or not. (The name doesn't really reflect the meaning in this case.) */
+       u64 tx_underun;         /* num tx packets aborted due to transmit
+                                * FIFO underrun, or TRD FIFO underrun */
+       u64 tx_trunc;           /* num tx packets truncated due to size
+                                * exceeding MTU, regardless whether truncated
+                                * by the chip or not. (The name doesn't really
+                                * reflect the meaning in this case.) */
        u64 rx_pause;           /* num Pause packets received. */
        u64 rx_rrd_ov;
        u64 rx_trunc;
 };
 
-/* board specific private data structure */
-#define ATL1_REGS_LEN  8
-
-/* Structure containing variables used by the shared code */
+/* hardware structure */
 struct atl1_hw {
        u8 __iomem *hw_addr;
        struct atl1_adapter *back;
@@ -167,24 +184,35 @@ struct atl1_hw {
        enum atl1_dma_req_block dmar_block;
        enum atl1_dma_req_block dmaw_block;
        u8 preamble_len;
-       u8 max_retry;           /* Retransmission maximum, after which the packet will be discarded */
-       u8 jam_ipg;             /* IPG to start JAM for collision based flow control in half-duplex mode. In units of 8-bit time */
-       u8 ipgt;                /* Desired back to back inter-packet gap. The default is 96-bit time */
-       u8 min_ifg;             /* Minimum number of IFG to enforce in between RX frames. Frame gap below such IFP is dropped */
+       u8 max_retry;           /* Retransmission maximum, after which the
+                                * packet will be discarded */
+       u8 jam_ipg;             /* IPG to start JAM for collision based flow
+                                * control in half-duplex mode. In units of
+                                * 8-bit time */
+       u8 ipgt;                /* Desired back to back inter-packet gap.
+                                * The default is 96-bit time */
+       u8 min_ifg;             /* Minimum number of IFG to enforce in between
+                                * receive frames. Frame gap below such IFP
+                                * is dropped */
        u8 ipgr1;               /* 64bit Carrier-Sense window */
        u8 ipgr2;               /* 96-bit IPG window */
-       u8 tpd_burst;           /* Number of TPD to prefetch in cache-aligned burst. Each TPD is 16 bytes long */
-       u8 rfd_burst;           /* Number of RFD to prefetch in cache-aligned burst. Each RFD is 12 bytes long */
+       u8 tpd_burst;           /* Number of TPD to prefetch in cache-aligned
+                                * burst. Each TPD is 16 bytes long */
+       u8 rfd_burst;           /* Number of RFD to prefetch in cache-aligned
+                                * burst. Each RFD is 12 bytes long */
        u8 rfd_fetch_gap;
-       u8 rrd_burst;           /* Threshold number of RRDs that can be retired in a burst. Each RRD is 16 bytes long */
+       u8 rrd_burst;           /* Threshold number of RRDs that can be retired
+                                * in a burst. Each RRD is 16 bytes long */
        u8 tpd_fetch_th;
        u8 tpd_fetch_gap;
        u16 tx_jumbo_task_th;
-       u16 txf_burst;          /* Number of data bytes to read in a cache-aligned burst. Each SRAM entry is
-                                  8 bytes long */
-       u16 rx_jumbo_th;        /* Jumbo packet size for non-VLAN packet. VLAN packets should add 4 bytes */
+       u16 txf_burst;          /* Number of data bytes to read in a cache-
+                                * aligned burst. Each SRAM entry is 8 bytes */
+       u16 rx_jumbo_th;        /* Jumbo packet size for non-VLAN packet. VLAN
+                                * packets should add 4 bytes */
        u16 rx_jumbo_lkah;
-       u16 rrd_ret_timer;      /* RRD retirement timer. Decrement by 1 after every 512ns passes. */
+       u16 rrd_ret_timer;      /* RRD retirement timer. Decrement by 1 after
+                                * every 512ns passes. */
        u16 lcol;               /* Collision Window */
 
        u16 cmb_tpd;
@@ -194,20 +222,12 @@ struct atl1_hw {
        u32 smb_timer;
        u16 media_type;
        u16 autoneg_advertised;
-       u16 pci_cmd_word;
 
        u16 mii_autoneg_adv_reg;
        u16 mii_1000t_ctrl_reg;
 
-       u32 mem_rang;
-       u32 txcw;
        u32 max_frame_size;
        u32 min_frame_size;
-       u32 mc_filter_type;
-       u32 num_mc_addrs;
-       u32 collision_delta;
-       u32 tx_packet_delta;
-       u16 phy_spd_default;
 
        u16 dev_rev;
        u8 revision_id;
@@ -215,21 +235,17 @@ struct atl1_hw {
        /* spi flash */
        u8 flash_vendor;
 
-       u8 dma_fairness;
        u8 mac_addr[ETH_ALEN];
        u8 perm_mac_addr[ETH_ALEN];
 
-       /* bool phy_preamble_sup; */
        bool phy_configured;
 };
 
 struct atl1_adapter {
-       /* OS defined structs */
        struct net_device *netdev;
        struct pci_dev *pdev;
        struct net_device_stats net_stats;
        struct atl1_sft_stats soft_stats;
-
        struct vlan_group *vlgrp;
        u32 rx_buffer_len;
        u32 wol;
@@ -243,9 +259,7 @@ struct atl1_adapter {
        struct timer_list phy_config_timer;
        bool phy_timer_pending;
 
-       bool mac_disabled;
-
-       /* All descriptor rings' memory */
+       /* all descriptor rings' memory */
        struct atl1_ring_header ring_header;
 
        /* TX */
@@ -258,25 +272,16 @@ struct atl1_adapter {
        u64 hw_csum_err;
        u64 hw_csum_good;
 
-       u32 gorcl;
-       u64 gorcl_old;
-
-       /* Interrupt Moderator timer ( 2us resolution) */
-       u16 imt;
-       /* Interrupt Clear timer (2us resolution) */
-       u16 ict;
-
-       /* MII interface info */
-       struct mii_if_info mii;
+       u16 imt;        /* interrupt moderator timer (2us resolution */
+       u16 ict;        /* interrupt clear timer (2us resolution */
+       struct mii_if_info mii;         /* MII interface info */
 
        /* structs defined in atl1_hw.h */
-       u32 bd_number;          /* board number */
+       u32 bd_number;                  /* board number */
        bool pci_using_64;
        struct atl1_hw hw;
        struct atl1_smb smb;
        struct atl1_cmb cmb;
-
-       u32 pci_state[16];
 };
 
 #endif /* _ATL1_H_ */
index ef12dba8581157e1d7dbf73e2da55259d0fc0128..6c8cf986bee4423d076ecf4d5a6200abda5a0bac 100644 (file)
@@ -1344,21 +1344,21 @@ static void atl1_tx_map(struct atl1_adapter *adapter,
 
                if (first_buf_len > proto_hdr_len) {
                        len12 = first_buf_len - proto_hdr_len;
-                       m = (len12 + MAX_TX_BUF_LEN - 1) / MAX_TX_BUF_LEN;
+                       m = (len12 + ATL1_MAX_TX_BUF_LEN - 1) / ATL1_MAX_TX_BUF_LEN;
                        for (i = 0; i < m; i++) {
                                buffer_info =
                                    &tpd_ring->buffer_info[tpd_next_to_use];
                                buffer_info->skb = NULL;
                                buffer_info->length =
-                                   (MAX_TX_BUF_LEN >=
-                                    len12) ? MAX_TX_BUF_LEN : len12;
+                                   (ATL1_MAX_TX_BUF_LEN >=
+                                    len12) ? ATL1_MAX_TX_BUF_LEN : len12;
                                len12 -= buffer_info->length;
                                page = virt_to_page(skb->data +
                                                 (proto_hdr_len +
-                                                 i * MAX_TX_BUF_LEN));
+                                                 i * ATL1_MAX_TX_BUF_LEN));
                                offset = (unsigned long)(skb->data +
                                                        (proto_hdr_len +
-                                                       i * MAX_TX_BUF_LEN)) &
+                                                       i * ATL1_MAX_TX_BUF_LEN)) &
                                                        ~PAGE_MASK;
                                buffer_info->dma =
                                    pci_map_page(adapter->pdev, page, offset,
@@ -1387,18 +1387,18 @@ static void atl1_tx_map(struct atl1_adapter *adapter,
                frag = &skb_shinfo(skb)->frags[f];
                lenf = frag->size;
 
-               m = (lenf + MAX_TX_BUF_LEN - 1) / MAX_TX_BUF_LEN;
+               m = (lenf + ATL1_MAX_TX_BUF_LEN - 1) / ATL1_MAX_TX_BUF_LEN;
                for (i = 0; i < m; i++) {
                        buffer_info = &tpd_ring->buffer_info[tpd_next_to_use];
                        if (unlikely(buffer_info->skb))
                                BUG();
                        buffer_info->skb = NULL;
                        buffer_info->length =
-                           (lenf > MAX_TX_BUF_LEN) ? MAX_TX_BUF_LEN : lenf;
+                           (lenf > ATL1_MAX_TX_BUF_LEN) ? ATL1_MAX_TX_BUF_LEN : lenf;
                        lenf -= buffer_info->length;
                        buffer_info->dma =
                            pci_map_page(adapter->pdev, frag->page,
-                                        frag->page_offset + i * MAX_TX_BUF_LEN,
+                                        frag->page_offset + i * ATL1_MAX_TX_BUF_LEN,
                                         buffer_info->length, PCI_DMA_TODEVICE);
 
                        if (++tpd_next_to_use == tpd_ring->count)
@@ -1516,7 +1516,7 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
                frag_size = skb_shinfo(skb)->frags[f].size;
                if (frag_size)
                        count +=
-                           (frag_size + MAX_TX_BUF_LEN - 1) / MAX_TX_BUF_LEN;
+                           (frag_size + ATL1_MAX_TX_BUF_LEN - 1) / ATL1_MAX_TX_BUF_LEN;
        }
 
        /* mss will be nonzero if we're doing segment offload (TSO/GSO) */
@@ -1532,7 +1532,7 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
                        /* need additional TPD ? */
                        if (proto_hdr_len != len)
                                count += (len - proto_hdr_len +
-                                       MAX_TX_BUF_LEN - 1) / MAX_TX_BUF_LEN;
+                                       ATL1_MAX_TX_BUF_LEN - 1) / ATL1_MAX_TX_BUF_LEN;
                }
        }