* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
ieee1394: add quirk fix for Freecom HDD
space, and might cause programs to fail unexpectedly.
To change the alignment trap behavior, simply echo a number into
-/proc/sys/debug/alignment. The number is made up from various bits:
+/proc/cpu/alignment. The number is made up from various bits:
bit behavior when set
--- -----------------
S: Maintained
ECRYPT FILE SYSTEM
-P: Mike Halcrow, Phillip Hellewell
-M: mhalcrow@us.ibm.com, phillip@hellewell.homeip.net
-L: ecryptfs-devel@lists.sourceforge.net
-W: http://ecryptfs.sourceforge.net/
+P: Tyler Hicks, Dustin Kirkland
+M: tyhicks@linux.vnet.ibm.com, kirkland@canonical.com
+L: ecryptfs-devel@lists.launchpad.net
+W: https://launchpad.net/ecryptfs
S: Supported
EDAC-CORE
return -ENOMEM;
sachip->clk = clk_get(me, "SA1111_CLK");
- if (!sachip->clk) {
+ if (IS_ERR(sachip->clk)) {
ret = PTR_ERR(sachip->clk);
goto err_free;
}
EXPORT_SYMBOL(__strncpy_from_user);
#ifdef CONFIG_MMU
+EXPORT_SYMBOL(copy_page);
+
EXPORT_SYMBOL(__copy_from_user);
EXPORT_SYMBOL(__copy_to_user);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(_find_next_bit_be);
#endif
-EXPORT_SYMBOL(copy_page);
-
#ifdef CONFIG_FUNCTION_TRACER
EXPORT_SYMBOL(mcount);
#endif
#include <linux/personality.h>
#include <linux/kallsyms.h>
#include <linux/delay.h>
+#include <linux/hardirq.h>
#include <linux/init.h>
#include <linux/uaccess.h>
/**
* init_gpio_reset() - register GPIO as reset generator
- *
- * @gpio - gpio nr
- * @output - set gpio as out/low instead of input during normal work
+ * @gpio: gpio nr
+ * @output: set gpio as out/low instead of input during normal work
*/
extern int init_gpio_reset(int gpio, int output);
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/mm.h>
+#include <linux/hardirq.h>
#include <linux/init.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
config HP_SIMETH
bool "Simulated Ethernet "
+ depends on NET
config HP_SIMSERIAL
bool "Simulated serial driver support"
help
If you say Y here, some debugging macros will do run-time checking.
If you say N here, those macros will mostly turn to no-ops. See
- include/asm-mips/debug.h for debuging macros.
+ arch/mips/include/asm/debug.h for debugging macros.
If unsure, say N.
endmenu
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:33 2007
+# Linux kernel version: 2.6.28-rc7
+# Wed Dec 10 14:39:08 2008
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MACH_EMMA is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
CONFIG_SGI_IP32=y
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_ARC=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_IRQ_CPU=y
CONFIG_ARC32=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
+# CONFIG_CPU_LOONGSON2 is not set
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_TX49XX is not set
CONFIG_CPU_R5000=y
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
+CONFIG_HZ_250=y
# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
-# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_MIPS32_O32=y
-# CONFIG_MIPS32_N32 is not set
+CONFIG_MIPS32_N32=y
CONFIG_BINFMT_ELF32=y
#
# Power management options
#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_SOFTMAC=y
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=y
-
-#
-# Misc devices
-#
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_SGI_IOC4=y
# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
-CONFIG_SCSI_NETLINK=y
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_CHR_DEV_OSST=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
-CONFIG_SCSI_AIC94XX=y
-# CONFIG_AIC94XX_DEBUG is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
CONFIG_SGI_O2MACE_ETH=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=y
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=y
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=y
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_MACEPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_MACEPS2=y
+CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_GAMEPORT is not set
# Character devices
#
CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
+CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
#
-# I2C support
+# Watchdog Device Drivers
#
-# CONFIG_I2C is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
#
-# SPI support
+# PCI-based Watchdog Cards
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
#
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
#
-# CONFIG_W1 is not set
+# CONFIG_SSB is not set
#
-# Hardware Monitoring support
+# Multifunction device drivers
#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
-# CONFIG_VIDEO_DEV is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia core support
#
-# CONFIG_DVB is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
#
-# Graphics support
+# Multimedia drivers
#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+CONFIG_DAB=y
#
-# Console display driver support
+# Graphics support
#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_GBE=y
+CONFIG_FB_GBE_MEM=4
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
+# Display device support
#
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
#
-# HID Devices
+# Console display driver support
#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_SGI_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
+# Special HID drivers
#
+CONFIG_HID_COMPAT=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# RTC interfaces
#
+# CONFIG_RTC_INTF_SYSFS is not set
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# Real Time Clock
+# SPI RTC drivers
#
-# CONFIG_RTC_CLASS is not set
#
-# DMA Engine support
+# Platform RTC drivers
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=y
#
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=y
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
#
-# Cryptographic options
+# Crypto core or helper
#
-CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CAMELLIA=y
+# CONFIG_CRYPTO_LZO is not set
#
-# Hardware crypto devices
+# Random Number Generation
#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
mtc0 \reg, CP0_TCSTATUS
_ehb
.endm
+#elif defined(CONFIG_CPU_MIPSR2)
+ .macro local_irq_enable reg=t0
+ ei
+ irq_enable_hazard
+ .endm
+
+ .macro local_irq_disable reg=t0
+ di
+ irq_disable_hazard
+ .endm
#else
.macro local_irq_enable reg=t0
mfc0 \reg, CP0_STATUS
void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr,
dma_addr_t dma_handle)
{
+ plat_unmap_dma_mem(dma_handle);
free_pages((unsigned long) vaddr, get_order(size));
}
{
unsigned long addr = (unsigned long) vaddr;
+ plat_unmap_dma_mem(dma_handle);
+
if (!plat_device_is_coherent(dev))
addr = CAC_ADDR(addr);
$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
+$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
* (no broadcast)
*/
_GLOBAL(_tlbil_va)
+ mfmsr r10
+ wrteei 0
slwi r4,r4,16
mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
tlbsx 0,r3
tlbwe
msync
isync
+ wrtee r10
blr
#endif /* CONFIG_FSL_BOOKE */
{
struct hstate *hstate = hstate_file(file);
int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
+
+ if (!mmu_huge_psizes[mmu_psize])
+ return -EINVAL;
return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
}
if (end_pfn > node_ar.end_pfn)
reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
- (start_pfn << PAGE_SHIFT);
- dbg("reserve_bootmem %lx %lx nid=%d\n", physbase,
- reserve_size, node_ar.nid);
- reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
- reserve_size, BOOTMEM_DEFAULT);
+ /*
+ * Only worry about *this* node, others may not
+ * yet have valid NODE_DATA().
+ */
+ if (node_ar.nid == nid) {
+ dbg("reserve_bootmem %lx %lx nid=%d\n",
+ physbase, reserve_size, node_ar.nid);
+ reserve_bootmem_node(NODE_DATA(node_ar.nid),
+ physbase, reserve_size,
+ BOOTMEM_DEFAULT);
+ }
/*
* if reserved region is contained in the active region
* then done.
void __init do_init_bootmem(void)
{
int nid;
- unsigned int i;
min_low_pfn = 0;
max_low_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
MSIC_CTRL_IRQ_ENABLE | MSIC_CTRL_ENABLE |
MSIC_CTRL_FIFO_SIZE);
+ msic->read_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG)
+ & MSIC_FIFO_SIZE_MASK;
+
device->dev.platform_data = msic;
ppc_md.setup_msi_irqs = axon_msi_setup_msi_irqs;
config GENERIC_HARDIRQS_NO__DO_IRQ
def_bool y
+ depends on SUPERH32 && (!SH_DREAMCAST && !SH_SH4202_MICRODEV && \
+ !SH_7751_SYSTEMH && !HD64461)
config GENERIC_IRQ_PROBE
def_bool y
} __attribute__((packed));
/* Function prototypes for bootstrapping */
+#ifdef CONFIG_VMI
extern void vmi_init(void);
+extern void vmi_activate(void);
extern void vmi_bringup(void);
-extern void vmi_apply_boot_page_allocations(void);
+#else
+static inline void vmi_init(void) {}
+static inline void vmi_activate(void) {}
+static inline void vmi_bringup(void) {}
+#endif
/* State needed to start an application processor in an SMP system. */
struct vmi_ap_state {
printk(KERN_INFO "Command line: %s\n", boot_command_line);
#endif
+ /* VMI may relocate the fixmap; do this before touching ioremap area */
+ vmi_init();
+
early_cpu_init();
early_ioremap_init();
check_efer();
#endif
-#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
- /*
- * Must be before kernel pagetables are setup
- * or fixmap area is touched.
- */
- vmi_init();
-#endif
+ /* Must be before kernel pagetables are setup */
+ vmi_activate();
/* after early param, so could get panic from serial */
reserve_early_setup_data();
* fragile that we want to limit the things done here to the
* most necessary things.
*/
-#ifdef CONFIG_VMI
vmi_bringup();
-#endif
cpu_init();
preempt_disable();
smp_callin();
void __init vmi_init(void)
{
- unsigned long flags;
-
if (!vmi_rom)
probe_vmi_rom();
else
reserve_top_address(-vmi_rom->virtual_top);
- local_irq_save(flags);
- activate_vmi();
-
#ifdef CONFIG_X86_IO_APIC
/* This is virtual hardware; timer routing is wired correctly */
no_timer_check = 1;
#endif
+}
+
+void vmi_activate(void)
+{
+ unsigned long flags;
+
+ if (!vmi_rom)
+ return;
+
+ local_irq_save(flags);
+ activate_vmi();
local_irq_restore(flags & X86_EFLAGS_IF);
}
toshiba_acpi_exit();
return -ENOMEM;
}
- }
- /* Register input device for kill switch */
- toshiba_acpi.poll_dev = input_allocate_polled_device();
- if (!toshiba_acpi.poll_dev) {
- printk(MY_ERR "unable to allocate kill-switch input device\n");
- toshiba_acpi_exit();
- return -ENOMEM;
- }
- toshiba_acpi.poll_dev->private = &toshiba_acpi;
- toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
- toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
-
- toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
- toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
- toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */
- set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
- set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
- input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE);
- input_sync(toshiba_acpi.poll_dev->input);
-
- ret = input_register_polled_device(toshiba_acpi.poll_dev);
- if (ret) {
- printk(MY_ERR "unable to register kill-switch input device\n");
- toshiba_acpi_exit();
- return ret;
+ /* Register input device for kill switch */
+ toshiba_acpi.poll_dev = input_allocate_polled_device();
+ if (!toshiba_acpi.poll_dev) {
+ printk(MY_ERR
+ "unable to allocate kill-switch input device\n");
+ toshiba_acpi_exit();
+ return -ENOMEM;
+ }
+ toshiba_acpi.poll_dev->private = &toshiba_acpi;
+ toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
+ toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
+
+ toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
+ toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
+ /* Toshiba USB ID */
+ toshiba_acpi.poll_dev->input->id.vendor = 0x0930;
+ set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
+ set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
+ input_report_switch(toshiba_acpi.poll_dev->input,
+ SW_RFKILL_ALL, TRUE);
+ input_sync(toshiba_acpi.poll_dev->input);
+
+ ret = input_register_polled_device(toshiba_acpi.poll_dev);
+ if (ret) {
+ printk(MY_ERR
+ "unable to register kill-switch input device\n");
+ toshiba_acpi_exit();
+ return ret;
+ }
}
return 0;
{ "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ },
/* Seagate NCQ + FLUSH CACHE firmware bug */
- { "ST31500341AS", "9JU138", ATA_HORKAGE_NONCQ |
+ { "ST31500341AS", "SD15", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
- { "ST31000333AS", "9FZ136", ATA_HORKAGE_NONCQ |
+ { "ST31500341AS", "SD16", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
- { "ST3640623AS", "9FZ164", ATA_HORKAGE_NONCQ |
+ { "ST31500341AS", "SD17", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
- { "ST3640323AS", "9FZ134", ATA_HORKAGE_NONCQ |
+ { "ST31500341AS", "SD18", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
- { "ST3320813AS", "9FZ182", ATA_HORKAGE_NONCQ |
+ { "ST31500341AS", "SD19", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
- { "ST3320613AS", "9FZ162", ATA_HORKAGE_NONCQ |
+
+ { "ST31000333AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31000333AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31000333AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31000333AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31000333AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
+ { "ST3640623AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640623AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640623AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640623AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640623AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
+ { "ST3640323AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640323AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640323AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640323AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640323AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
+ { "ST3320813AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320813AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320813AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320813AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320813AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
+ { "ST3320613AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320613AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320613AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320613AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320613AS", "SD19", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
/* Blacklist entries taken from Silicon Image 3124/3132
mask &= ~(0xF8 << ATA_SHIFT_UDMA);
if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
mask &= ~(0xF0 << ATA_SHIFT_UDMA);
- }
+ } else if (adev->class == ATA_DEV_ATAPI)
+ mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+
return ata_bmdma_mode_filter(adev, mask);
}
static int hpt36x_cable_detect(struct ata_port *ap)
{
- u8 ata66;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u8 ata66;
+ /*
+ * Each channel of pata_hpt366 occupies separate PCI function
+ * as the primary channel and bit1 indicates the cable type.
+ */
pci_read_config_byte(pdev, 0x5A, &ata66);
- if (ata66 & (1 << ap->port_no))
+ if (ata66 & 2)
return ATA_CBL_PATA40;
return ATA_CBL_PATA80;
}
if (!q)
return -ENXIO;
- rq = blk_get_request(q, READ, GFP_KERNEL);
- if (!rq)
- return -ENOMEM;
-
cdi->last_sense = 0;
while (nframes) {
len = nr * CD_FRAMESIZE_RAW;
+ rq = blk_get_request(q, READ, GFP_KERNEL);
+ if (!rq) {
+ ret = -ENOMEM;
+ break;
+ }
+
ret = blk_rq_map_user(q, rq, NULL, ubuf, len, GFP_KERNEL);
- if (ret)
+ if (ret) {
+ blk_put_request(rq);
break;
+ }
rq->cmd[0] = GPCMD_READ_CD;
rq->cmd[1] = 1 << 2;
if (blk_rq_unmap_user(bio))
ret = -EFAULT;
+ blk_put_request(rq);
if (ret)
break;
ubuf += len;
}
- blk_put_request(rq);
return ret;
}
0x0c U+2640
0x0d U+266a
0x0e U+266b
-0x0f U+263c
+0x0f U+263c U+00a4
0x10 U+25b6 U+25ba
0x11 U+25c0 U+25c4
0x12 U+2195
0x24 U+0024
0x25 U+0025
0x26 U+0026
-0x27 U+0027
+0x27 U+0027 U+00b4
0x28 U+0028
0x29 U+0029
0x2a U+002a
0x41 U+0041 U+00c0 U+00c1 U+00c2 U+00c3
0x42 U+0042
0x43 U+0043 U+00a9
-0x44 U+0044
+0x44 U+0044 U+00d0
0x45 U+0045 U+00c8 U+00ca U+00cb
0x46 U+0046
0x47 U+0047
0x79 U+0079 U+00fd
0x7a U+007a
0x7b U+007b
-0x7c U+007c U+00a5
+0x7c U+007c U+00a6
0x7d U+007d
0x7e U+007e
#
0xe8 U+03a6 U+00d8
0xe9 U+0398
0xea U+03a9 U+2126
-0xeb U+03b4
+0xeb U+03b4 U+00f0
0xec U+221e
0xed U+03c6 U+00f8
-0xee U+03b5
+0xee U+03b5 U+2208
0xef U+2229
0xf0 U+2261
0xf1 U+00b1
continue; /* nothing to display */
}
/* Glyph not found */
- if ((!(vc->vc_utf && !vc->vc_disp_ctrl) || c < 128) && !(c & ~charmask)) {
+ if ((!(vc->vc_utf && !vc->vc_disp_ctrl) && c < 128) && !(c & ~charmask)) {
/* In legacy mode use the glyph we get by a 1:1 mapping.
This would make absolutely no sense with Unicode in mind,
but do this for ASCII characters since a font may lack
static void smbus_write_data(u8 *src, u16 *dst, int len)
{
for (; len > 1; len -= 2) {
- *dst++ = be16_to_cpup((u16 *)src);
+ *dst++ = be16_to_cpup((__be16 *)src);
src += 2;
}
static void smbus_read_data(u16 *src, u8 *dst, int len)
{
for (; len > 1; len -= 2) {
- *(u16 *)dst = cpu_to_be16p(src++);
+ *(__be16 *)dst = cpu_to_be16p(src++);
dst += 2;
}
if (cmd->type == MSP_TWI_CMD_WRITE ||
cmd->type == MSP_TWI_CMD_WRITE_READ) {
- __be64 tmp = cpu_to_be64p((u64 *)cmd->write_data);
+ u64 tmp = be64_to_cpup((__be64 *)cmd->write_data);
tmp >>= (MSP_MAX_BYTES_PER_RW - cmd->write_len) * 8;
dev_dbg(&pmcmsptwi_adapter.dev, "Writing 0x%016llx\n", tmp);
pmcmsptwi_writel(tmp & 0x00000000ffffffffLL,
ctrl |= E1000_CTRL_PHY_RST;
}
ret_val = e1000_acquire_swflag_ich8lan(hw);
+ /* Whether or not the swflag was acquired, we need to reset the part */
hw_dbg(hw, "Issuing a global reset to ich8lan");
ew32(CTRL, (ctrl | E1000_CTRL_RST));
msleep(20);
- /* release the swflag because it is not reset by hardware reset */
- e1000_release_swflag_ich8lan(hw);
+ if (!ret_val) {
+ /* release the swflag because it is not reset by
+ * hardware reset
+ */
+ e1000_release_swflag_ich8lan(hw);
+ }
ret_val = e1000e_get_auto_rd_done(hw);
if (ret_val) {
return NETDEV_TX_OK;
}
+static void gem_pcs_reset(struct gem *gp)
+{
+ int limit;
+ u32 val;
+
+ /* Reset PCS unit. */
+ val = readl(gp->regs + PCS_MIICTRL);
+ val |= PCS_MIICTRL_RST;
+ writel(val, gp->regs + PCS_MIICTRL);
+
+ limit = 32;
+ while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) {
+ udelay(100);
+ if (limit-- <= 0)
+ break;
+ }
+ if (limit <= 0)
+ printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
+ gp->dev->name);
+}
+
+static void gem_pcs_reinit_adv(struct gem *gp)
+{
+ u32 val;
+
+ /* Make sure PCS is disabled while changing advertisement
+ * configuration.
+ */
+ val = readl(gp->regs + PCS_CFG);
+ val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
+ writel(val, gp->regs + PCS_CFG);
+
+ /* Advertise all capabilities except assymetric
+ * pause.
+ */
+ val = readl(gp->regs + PCS_MIIADV);
+ val |= (PCS_MIIADV_FD | PCS_MIIADV_HD |
+ PCS_MIIADV_SP | PCS_MIIADV_AP);
+ writel(val, gp->regs + PCS_MIIADV);
+
+ /* Enable and restart auto-negotiation, disable wrapback/loopback,
+ * and re-enable PCS.
+ */
+ val = readl(gp->regs + PCS_MIICTRL);
+ val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE);
+ val &= ~PCS_MIICTRL_WB;
+ writel(val, gp->regs + PCS_MIICTRL);
+
+ val = readl(gp->regs + PCS_CFG);
+ val |= PCS_CFG_ENABLE;
+ writel(val, gp->regs + PCS_CFG);
+
+ /* Make sure serialink loopback is off. The meaning
+ * of this bit is logically inverted based upon whether
+ * you are in Serialink or SERDES mode.
+ */
+ val = readl(gp->regs + PCS_SCTRL);
+ if (gp->phy_type == phy_serialink)
+ val &= ~PCS_SCTRL_LOOP;
+ else
+ val |= PCS_SCTRL_LOOP;
+ writel(val, gp->regs + PCS_SCTRL);
+}
+
#define STOP_TRIES 32
/* Must be invoked under gp->lock and gp->tx_lock. */
if (limit <= 0)
printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name);
+
+ if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes)
+ gem_pcs_reinit_adv(gp);
}
/* Must be invoked under gp->lock and gp->tx_lock. */
gp->phy_type == phy_serdes) {
u32 pcs_lpa = readl(gp->regs + PCS_MIILP);
- if (pcs_lpa & PCS_MIIADV_FD)
+ if ((pcs_lpa & PCS_MIIADV_FD) || gp->phy_type == phy_serdes)
full_duplex = 1;
speed = SPEED_1000;
}
val = readl(gp->regs + PCS_MIISTAT);
if ((val & PCS_MIISTAT_LS) != 0) {
+ if (gp->lstate == link_up)
+ goto restart;
+
gp->lstate = link_up;
netif_carrier_on(gp->dev);
(void)gem_set_link_modes(gp);
if (gp->phy_mii.def && gp->phy_mii.def->ops->init)
gp->phy_mii.def->ops->init(&gp->phy_mii);
} else {
- u32 val;
- int limit;
-
- /* Reset PCS unit. */
- val = readl(gp->regs + PCS_MIICTRL);
- val |= PCS_MIICTRL_RST;
- writel(val, gp->regs + PCS_MIICTRL);
-
- limit = 32;
- while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) {
- udelay(100);
- if (limit-- <= 0)
- break;
- }
- if (limit <= 0)
- printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
- gp->dev->name);
-
- /* Make sure PCS is disabled while changing advertisement
- * configuration.
- */
- val = readl(gp->regs + PCS_CFG);
- val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
- writel(val, gp->regs + PCS_CFG);
-
- /* Advertise all capabilities except assymetric
- * pause.
- */
- val = readl(gp->regs + PCS_MIIADV);
- val |= (PCS_MIIADV_FD | PCS_MIIADV_HD |
- PCS_MIIADV_SP | PCS_MIIADV_AP);
- writel(val, gp->regs + PCS_MIIADV);
-
- /* Enable and restart auto-negotiation, disable wrapback/loopback,
- * and re-enable PCS.
- */
- val = readl(gp->regs + PCS_MIICTRL);
- val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE);
- val &= ~PCS_MIICTRL_WB;
- writel(val, gp->regs + PCS_MIICTRL);
-
- val = readl(gp->regs + PCS_CFG);
- val |= PCS_CFG_ENABLE;
- writel(val, gp->regs + PCS_CFG);
-
- /* Make sure serialink loopback is off. The meaning
- * of this bit is logically inverted based upon whether
- * you are in Serialink or SERDES mode.
- */
- val = readl(gp->regs + PCS_SCTRL);
- if (gp->phy_type == phy_serialink)
- val &= ~PCS_SCTRL_LOOP;
- else
- val |= PCS_SCTRL_LOOP;
- writel(val, gp->regs + PCS_SCTRL);
+ gem_pcs_reset(gp);
+ gem_pcs_reinit_adv(gp);
}
/* Default aneg parameters */
cmd->speed = 0;
cmd->duplex = cmd->port = cmd->phy_address =
cmd->transceiver = cmd->autoneg = 0;
+
+ /* serdes means usually a Fibre connector, with most fixed */
+ if (gp->phy_type == phy_serdes) {
+ cmd->port = PORT_FIBRE;
+ cmd->supported = (SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE | SUPPORTED_Autoneg |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause);
+ cmd->advertising = cmd->supported;
+ cmd->transceiver = XCVR_INTERNAL;
+ if (gp->lstate == link_up)
+ cmd->speed = SPEED_1000;
+ cmd->duplex = DUPLEX_FULL;
+ cmd->autoneg = 1;
+ }
}
cmd->maxtxpkt = cmd->maxrxpkt = 0;
module_init(bfin_cf_init);
module_exit(bfin_cf_exit);
-MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>")
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("BFIN CF/PCMCIA Driver");
MODULE_LICENSE("GPL");
struct request *req;
int ret;
+retry:
req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
if (!req)
return SCSI_DH_RES_TEMP_UNAVAIL;
memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
req->sense_len = 0;
-retry:
ret = blk_execute_rq(req->q, NULL, req, 1);
if (ret == -EIO) {
if (req->sense_len > 0) {
h->path_state = HP_SW_PATH_ACTIVE;
ret = SCSI_DH_OK;
}
- if (ret == SCSI_DH_IMM_RETRY)
+ if (ret == SCSI_DH_IMM_RETRY) {
+ blk_put_request(req);
goto retry;
+ }
if (ret == SCSI_DH_DEV_OFFLINED) {
h->path_state = HP_SW_PATH_PASSIVE;
ret = SCSI_DH_OK;
struct request *req;
int ret, retry;
+retry:
req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
if (!req)
return SCSI_DH_RES_TEMP_UNAVAIL;
req->sense_len = 0;
retry = h->retries;
-retry:
ret = blk_execute_rq(req->q, NULL, req, 1);
if (ret == -EIO) {
if (req->sense_len > 0) {
ret = SCSI_DH_OK;
if (ret == SCSI_DH_RETRY) {
- if (--retry)
+ if (--retry) {
+ blk_put_request(req);
goto retry;
+ }
ret = SCSI_DH_IO;
}
maple_queue_cache =
kmem_cache_create("maple_queue_cache", 0x400, 0,
- SLAB_POISON|SLAB_HWCACHE_ALIGN, NULL);
+ SLAB_HWCACHE_ALIGN, NULL);
if (!maple_queue_cache)
goto cleanup_bothirqs;
* --dte
*/
-#define FLUSH_CACHE_WORKAROUND 1
-
-void radeon_fifo_update_and_wait(struct radeonfb_info *rinfo, int entries)
+static void radeon_fixup_offset(struct radeonfb_info *rinfo)
{
- int i;
+ u32 local_base;
+
+ /* *** Ugly workaround *** */
+ /*
+ * On some platforms, the video memory is mapped at 0 in radeon chip space
+ * (like PPCs) by the firmware. X will always move it up so that it's seen
+ * by the chip to be at the same address as the PCI BAR.
+ * That means that when switching back from X, there is a mismatch between
+ * the offsets programmed into the engine. This means that potentially,
+ * accel operations done before radeonfb has a chance to re-init the engine
+ * will have incorrect offsets, and potentially trash system memory !
+ *
+ * The correct fix is for fbcon to never call any accel op before the engine
+ * has properly been re-initialized (by a call to set_var), but this is a
+ * complex fix. This workaround in the meantime, called before every accel
+ * operation, makes sure the offsets are in sync.
+ */
- for (i=0; i<2000000; i++) {
- rinfo->fifo_free = INREG(RBBM_STATUS) & 0x7f;
- if (rinfo->fifo_free >= entries)
- return;
- udelay(10);
- }
- printk(KERN_ERR "radeonfb: FIFO Timeout !\n");
- /* XXX Todo: attempt to reset the engine */
-}
+ radeon_fifo_wait (1);
+ local_base = INREG(MC_FB_LOCATION) << 16;
+ if (local_base == rinfo->fb_local_base)
+ return;
-static inline void radeon_fifo_wait(struct radeonfb_info *rinfo, int entries)
-{
- if (entries <= rinfo->fifo_free)
- rinfo->fifo_free -= entries;
- else
- radeon_fifo_update_and_wait(rinfo, entries);
-}
+ rinfo->fb_local_base = local_base;
-static inline void radeonfb_set_creg(struct radeonfb_info *rinfo, u32 reg,
- u32 *cache, u32 new_val)
-{
- if (new_val == *cache)
- return;
- *cache = new_val;
- radeon_fifo_wait(rinfo, 1);
- OUTREG(reg, new_val);
+ radeon_fifo_wait (3);
+ OUTREG(DEFAULT_PITCH_OFFSET, (rinfo->pitch << 0x16) |
+ (rinfo->fb_local_base >> 10));
+ OUTREG(DST_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
+ OUTREG(SRC_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
}
static void radeonfb_prim_fillrect(struct radeonfb_info *rinfo,
const struct fb_fillrect *region)
{
- radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache,
- rinfo->dp_gui_mc_base | GMC_BRUSH_SOLID_COLOR | ROP3_P);
- radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache,
- DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM);
- radeonfb_set_creg(rinfo, DP_BRUSH_FRGD_CLR, &rinfo->dp_brush_fg_cache,
- region->color);
-
- /* Ensure the dst cache is flushed and the engine idle before
- * issuing the operation.
- *
- * This works around engine lockups on some cards
- */
-#if FLUSH_CACHE_WORKAROUND
- radeon_fifo_wait(rinfo, 2);
+ radeon_fifo_wait(4);
+
+ OUTREG(DP_GUI_MASTER_CNTL,
+ rinfo->dp_gui_master_cntl /* contains, like GMC_DST_32BPP */
+ | GMC_BRUSH_SOLID_COLOR
+ | ROP3_P);
+ if (radeon_get_dstbpp(rinfo->depth) != DST_8BPP)
+ OUTREG(DP_BRUSH_FRGD_CLR, rinfo->pseudo_palette[region->color]);
+ else
+ OUTREG(DP_BRUSH_FRGD_CLR, region->color);
+ OUTREG(DP_WRITE_MSK, 0xffffffff);
+ OUTREG(DP_CNTL, (DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM));
+
+ radeon_fifo_wait(2);
OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
-#endif
- radeon_fifo_wait(rinfo, 2);
+
+ radeon_fifo_wait(2);
OUTREG(DST_Y_X, (region->dy << 16) | region->dx);
OUTREG(DST_WIDTH_HEIGHT, (region->width << 16) | region->height);
}
struct fb_fillrect modded;
int vxres, vyres;
- WARN_ON(rinfo->gfx_mode);
- if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode)
+ if (info->state != FBINFO_STATE_RUNNING)
return;
if (info->flags & FBINFO_HWACCEL_DISABLED) {
cfb_fillrect(info, region);
return;
}
+ radeon_fixup_offset(rinfo);
+
vxres = info->var.xres_virtual;
vyres = info->var.yres_virtual;
if(modded.dx + modded.width > vxres) modded.width = vxres - modded.dx;
if(modded.dy + modded.height > vyres) modded.height = vyres - modded.dy;
- if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
- info->fix.visual == FB_VISUAL_DIRECTCOLOR )
- modded.color = ((u32 *) (info->pseudo_palette))[region->color];
-
radeonfb_prim_fillrect(rinfo, &modded);
}
if ( xdir < 0 ) { sx += w-1; dx += w-1; }
if ( ydir < 0 ) { sy += h-1; dy += h-1; }
- radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache,
- rinfo->dp_gui_mc_base |
- GMC_BRUSH_NONE |
- GMC_SRC_DATATYPE_COLOR |
- ROP3_S |
- DP_SRC_SOURCE_MEMORY);
- radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache,
- (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0) |
- (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0));
-
-#if FLUSH_CACHE_WORKAROUND
- radeon_fifo_wait(rinfo, 2);
+ radeon_fifo_wait(3);
+ OUTREG(DP_GUI_MASTER_CNTL,
+ rinfo->dp_gui_master_cntl /* i.e. GMC_DST_32BPP */
+ | GMC_BRUSH_NONE
+ | GMC_SRC_DSTCOLOR
+ | ROP3_S
+ | DP_SRC_SOURCE_MEMORY );
+ OUTREG(DP_WRITE_MSK, 0xffffffff);
+ OUTREG(DP_CNTL, (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0)
+ | (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0));
+
+ radeon_fifo_wait(2);
OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
-#endif
- radeon_fifo_wait(rinfo, 3);
+
+ radeon_fifo_wait(3);
OUTREG(SRC_Y_X, (sy << 16) | sx);
OUTREG(DST_Y_X, (dy << 16) | dx);
OUTREG(DST_HEIGHT_WIDTH, (h << 16) | w);
modded.width = area->width;
modded.height = area->height;
- WARN_ON(rinfo->gfx_mode);
- if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode)
+ if (info->state != FBINFO_STATE_RUNNING)
return;
if (info->flags & FBINFO_HWACCEL_DISABLED) {
cfb_copyarea(info, area);
return;
}
+ radeon_fixup_offset(rinfo);
+
vxres = info->var.xres_virtual;
vyres = info->var.yres_virtual;
radeonfb_prim_copyarea(rinfo, &modded);
}
-static void radeonfb_prim_imageblit(struct radeonfb_info *rinfo,
- const struct fb_image *image,
- u32 fg, u32 bg)
-{
- unsigned int dwords;
- u32 *bits;
-
- radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache,
- rinfo->dp_gui_mc_base |
- GMC_BRUSH_NONE | GMC_DST_CLIP_LEAVE |
- GMC_SRC_DATATYPE_MONO_FG_BG |
- ROP3_S |
- GMC_BYTE_ORDER_MSB_TO_LSB |
- DP_SRC_SOURCE_HOST_DATA);
- radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache,
- DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM);
- radeonfb_set_creg(rinfo, DP_SRC_FRGD_CLR, &rinfo->dp_src_fg_cache, fg);
- radeonfb_set_creg(rinfo, DP_SRC_BKGD_CLR, &rinfo->dp_src_bg_cache, bg);
-
- /* Ensure the dst cache is flushed and the engine idle before
- * issuing the operation.
- *
- * This works around engine lockups on some cards
- */
-#if FLUSH_CACHE_WORKAROUND
- radeon_fifo_wait(rinfo, 2);
- OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
- OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
-#endif
-
- /* X here pads width to a multiple of 32 and uses the clipper to
- * adjust the result. Is that really necessary ? Things seem to
- * work ok for me without that and the doco doesn't seem to imply]
- * there is such a restriction.
- */
- radeon_fifo_wait(rinfo, 4);
- OUTREG(SC_TOP_LEFT, (image->dy << 16) | image->dx);
- OUTREG(SC_BOTTOM_RIGHT, ((image->dy + image->height) << 16) |
- (image->dx + image->width));
- OUTREG(DST_Y_X, (image->dy << 16) | image->dx);
-
- OUTREG(DST_HEIGHT_WIDTH, (image->height << 16) | ((image->width + 31) & ~31));
-
- dwords = (image->width + 31) >> 5;
- dwords *= image->height;
- bits = (u32*)(image->data);
-
- while(dwords >= 8) {
- radeon_fifo_wait(rinfo, 8);
-#if BITS_PER_LONG == 64
- __raw_writeq(*((u64 *)(bits)), rinfo->mmio_base + HOST_DATA0);
- __raw_writeq(*((u64 *)(bits+2)), rinfo->mmio_base + HOST_DATA2);
- __raw_writeq(*((u64 *)(bits+4)), rinfo->mmio_base + HOST_DATA4);
- __raw_writeq(*((u64 *)(bits+6)), rinfo->mmio_base + HOST_DATA6);
- bits += 8;
-#else
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA0);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA1);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA2);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA3);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA4);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA5);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA6);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA7);
-#endif
- dwords -= 8;
- }
- while(dwords--) {
- radeon_fifo_wait(rinfo, 1);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA0);
- }
-}
-
void radeonfb_imageblit(struct fb_info *info, const struct fb_image *image)
{
struct radeonfb_info *rinfo = info->par;
- u32 fg, bg;
- WARN_ON(rinfo->gfx_mode);
- if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode)
- return;
-
- if (!image->width || !image->height)
+ if (info->state != FBINFO_STATE_RUNNING)
return;
-
- /* We only do 1 bpp color expansion for now */
- if (!accel_cexp ||
- (info->flags & FBINFO_HWACCEL_DISABLED) || image->depth != 1)
- goto fallback;
-
- /* Fallback if running out of the screen. We may do clipping
- * in the future */
- if ((image->dx + image->width) > info->var.xres_virtual ||
- (image->dy + image->height) > info->var.yres_virtual)
- goto fallback;
-
- if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
- info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
- fg = ((u32*)(info->pseudo_palette))[image->fg_color];
- bg = ((u32*)(info->pseudo_palette))[image->bg_color];
- } else {
- fg = image->fg_color;
- bg = image->bg_color;
- }
-
- radeonfb_prim_imageblit(rinfo, image, fg, bg);
- return;
-
- fallback:
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
cfb_imageblit(info, image);
}
if (info->state != FBINFO_STATE_RUNNING)
return 0;
-
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
return 0;
}
/* disable 3D engine */
OUTREG(RB3D_CNTL, 0);
- rinfo->fifo_free = 0;
radeonfb_engine_reset(rinfo);
- radeon_fifo_wait(rinfo, 1);
+ radeon_fifo_wait (1);
if (IS_R300_VARIANT(rinfo)) {
OUTREG(RB2D_DSTCACHE_MODE, INREG(RB2D_DSTCACHE_MODE) |
RB2D_DC_AUTOFLUSH_ENABLE |
OUTREG(RB2D_DSTCACHE_MODE, 0);
}
- radeon_fifo_wait(rinfo, 3);
+ radeon_fifo_wait (3);
/* We re-read MC_FB_LOCATION from card as it can have been
* modified by XFree drivers (ouch !)
*/
OUTREG(DST_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
OUTREG(SRC_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
- radeon_fifo_wait(rinfo, 1);
-#ifdef __BIG_ENDIAN
+ radeon_fifo_wait (1);
+#if defined(__BIG_ENDIAN)
OUTREGP(DP_DATATYPE, HOST_BIG_ENDIAN_EN, ~HOST_BIG_ENDIAN_EN);
#else
OUTREGP(DP_DATATYPE, 0, ~HOST_BIG_ENDIAN_EN);
#endif
- radeon_fifo_wait(rinfo, 2);
+ radeon_fifo_wait (2);
OUTREG(DEFAULT_SC_TOP_LEFT, 0);
OUTREG(DEFAULT_SC_BOTTOM_RIGHT, (DEFAULT_SC_RIGHT_MAX |
DEFAULT_SC_BOTTOM_MAX));
- /* set default DP_GUI_MASTER_CNTL */
temp = radeon_get_dstbpp(rinfo->depth);
- rinfo->dp_gui_mc_base = ((temp << 8) | GMC_CLR_CMP_CNTL_DIS);
+ rinfo->dp_gui_master_cntl = ((temp << 8) | GMC_CLR_CMP_CNTL_DIS);
- rinfo->dp_gui_mc_cache = rinfo->dp_gui_mc_base |
- GMC_BRUSH_SOLID_COLOR |
- GMC_SRC_DATATYPE_COLOR;
- radeon_fifo_wait(rinfo, 1);
- OUTREG(DP_GUI_MASTER_CNTL, rinfo->dp_gui_mc_cache);
+ radeon_fifo_wait (1);
+ OUTREG(DP_GUI_MASTER_CNTL, (rinfo->dp_gui_master_cntl |
+ GMC_BRUSH_SOLID_COLOR |
+ GMC_SRC_DATATYPE_COLOR));
+ radeon_fifo_wait (7);
/* clear line drawing regs */
- radeon_fifo_wait(rinfo, 2);
OUTREG(DST_LINE_START, 0);
OUTREG(DST_LINE_END, 0);
- /* set brush and source color regs */
- rinfo->dp_brush_fg_cache = 0xffffffff;
- rinfo->dp_brush_bg_cache = 0x00000000;
- rinfo->dp_src_fg_cache = 0xffffffff;
- rinfo->dp_src_bg_cache = 0x00000000;
- radeon_fifo_wait(rinfo, 4);
- OUTREG(DP_BRUSH_FRGD_CLR, rinfo->dp_brush_fg_cache);
- OUTREG(DP_BRUSH_BKGD_CLR, rinfo->dp_brush_bg_cache);
- OUTREG(DP_SRC_FRGD_CLR, rinfo->dp_src_fg_cache);
- OUTREG(DP_SRC_BKGD_CLR, rinfo->dp_src_bg_cache);
-
- /* Default direction */
- rinfo->dp_cntl_cache = DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM;
- radeon_fifo_wait(rinfo, 1);
- OUTREG(DP_CNTL, rinfo->dp_cntl_cache);
+ /* set brush color regs */
+ OUTREG(DP_BRUSH_FRGD_CLR, 0xffffffff);
+ OUTREG(DP_BRUSH_BKGD_CLR, 0x00000000);
+
+ /* set source color regs */
+ OUTREG(DP_SRC_FRGD_CLR, 0xffffffff);
+ OUTREG(DP_SRC_BKGD_CLR, 0x00000000);
/* default write mask */
- radeon_fifo_wait(rinfo, 1);
OUTREG(DP_WRITE_MSK, 0xffffffff);
- /* Default to no swapping of host data */
- radeon_fifo_wait(rinfo, 1);
- OUTREG(RBBM_GUICNTL, RBBM_GUICNTL_HOST_DATA_SWAP_NONE);
-
- /* Make sure it's settled */
- radeon_engine_idle(rinfo);
+ radeon_engine_idle ();
}
level = bd->props.brightness;
del_timer_sync(&rinfo->lvds_timer);
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
lvds_gen_cntl = INREG(LVDS_GEN_CNTL);
if (level > 0) {
static int backlight = 0;
#endif
-int accel_cexp = 0;
-
/*
* prototypes
*/
if (rinfo->asleep)
return 0;
+ radeon_fifo_wait(2);
OUTREG(CRTC_OFFSET, ((var->yoffset * var->xres_virtual + var->xoffset)
* var->bits_per_pixel / 8) & ~7);
return 0;
if (rc)
return rc;
+ radeon_fifo_wait(2);
if (value & 0x01) {
tmp = INREG(LVDS_GEN_CNTL);
if (rinfo->lock_blank)
return 0;
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
val = INREG(CRTC_EXT_CNTL);
val &= ~(CRTC_DISPLAY_DIS | CRTC_HSYNC_DIS |
if (rinfo->asleep)
return 0;
-
+
return radeon_screen_blank(rinfo, blank, 0);
}
pindex = regno;
if (!rinfo->asleep) {
+ radeon_fifo_wait(9);
+
if (rinfo->bpp == 16) {
pindex = regno * 8;
{
int i;
+ radeon_fifo_wait(20);
+
/* Workaround from XFree */
if (rinfo->is_mobility) {
/* A temporal workaround for the occational blanking on certain laptop
{
struct radeonfb_info *rinfo = (struct radeonfb_info *)data;
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
OUTREG(LVDS_GEN_CNTL, rinfo->pending_lvds_gen_cntl);
}
if (nomodeset)
return;
- radeon_engine_idle(rinfo);
-
if (!regs_only)
radeon_screen_blank(rinfo, FB_BLANK_NORMAL, 0);
+ radeon_fifo_wait(31);
for (i=0; i<10; i++)
OUTREG(common_regs[i].reg, common_regs[i].val);
radeon_write_pll_regs(rinfo, mode);
if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) {
+ radeon_fifo_wait(10);
OUTREG(FP_CRTC_H_TOTAL_DISP, mode->fp_crtc_h_total_disp);
OUTREG(FP_CRTC_V_TOTAL_DISP, mode->fp_crtc_v_total_disp);
OUTREG(FP_H_SYNC_STRT_WID, mode->fp_h_sync_strt_wid);
if (!regs_only)
radeon_screen_blank(rinfo, FB_BLANK_UNBLANK, 0);
+ radeon_fifo_wait(2);
OUTPLL(VCLK_ECP_CNTL, mode->vclk_ecp_cntl);
return;
/* We always want engine to be idle on a mode switch, even
* if we won't actually change the mode
*/
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
hSyncStart = mode->xres + mode->right_margin;
hSyncEnd = hSyncStart + mode->hsync_len;
return 0;
}
+
static struct fb_ops radeonfb_ops = {
.owner = THIS_MODULE,
.fb_check_var = radeonfb_check_var,
info->par = rinfo;
info->pseudo_palette = rinfo->pseudo_palette;
info->flags = FBINFO_DEFAULT
- | FBINFO_HWACCEL_IMAGEBLIT
| FBINFO_HWACCEL_COPYAREA
| FBINFO_HWACCEL_FILLRECT
| FBINFO_HWACCEL_XPAN
info->fbops = &radeonfb_ops;
info->screen_base = rinfo->fb_base;
info->screen_size = rinfo->mapped_vram;
-
/* Fill fix common fields */
strlcpy(info->fix.id, rinfo->name, sizeof(info->fix.id));
info->fix.smem_start = rinfo->fb_base_phys;
info->fix.mmio_len = RADEON_REGSIZE;
info->fix.accel = FB_ACCEL_ATI_RADEON;
- /* Allocate colormap */
fb_alloc_cmap(&info->cmap, 256, 0);
- /* Setup pixmap used for acceleration */
-#define PIXMAP_SIZE (2048 * 4)
-
- info->pixmap.addr = kmalloc(PIXMAP_SIZE, GFP_KERNEL);
- if (!info->pixmap.addr) {
- printk(KERN_ERR "radeonfb: Failed to allocate pixmap !\n");
- noaccel = 1;
- goto bail;
- }
- info->pixmap.size = PIXMAP_SIZE;
- info->pixmap.flags = FB_PIXMAP_SYSTEM;
- info->pixmap.scan_align = 4;
- info->pixmap.buf_align = 4;
- info->pixmap.access_align = 32;
-
-bail:
if (noaccel)
info->flags |= FBINFO_HWACCEL_DISABLED;
u32 tom = INREG(NB_TOM);
tmp = ((((tom >> 16) - (tom & 0xffff) + 1) << 6) * 1024);
+ radeon_fifo_wait(6);
OUTREG(MC_FB_LOCATION, tom);
OUTREG(DISPLAY_BASE_ADDR, (tom & 0xffff) << 16);
OUTREG(CRTC2_DISPLAY_BASE_ADDR, (tom & 0xffff) << 16);
} else if (!strncmp(this_opt, "ignore_devlist", 14)) {
ignore_devlist = 1;
#endif
- } else if (!strncmp(this_opt, "accel_cexp", 12)) {
- accel_cexp = 1;
} else
mode_option = this_opt;
}
MODULE_PARM_DESC(monitor_layout, "Specify monitor mapping (like XFree86)");
module_param(force_measure_pll, bool, 0);
MODULE_PARM_DESC(force_measure_pll, "Force measurement of PLL (debug)");
-module_param(accel_cexp, bool, 0);
-MODULE_PARM_DESC(accel_cexp, "Use acceleration engine for color expansion");
#ifdef CONFIG_MTRR
module_param(nomtrr, bool, 0);
MODULE_PARM_DESC(nomtrr, "bool: disable use of MTRR registers");
if (!(info->flags & FBINFO_HWACCEL_DISABLED)) {
/* Make sure engine is reset */
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
radeonfb_engine_reset(rinfo);
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
}
/* Blank display and LCD */
rinfo->asleep = 0;
} else
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
/* Restore display & engine */
radeon_write_mode (rinfo, &rinfo->state, 1);
int mon2_type;
u8 *mon2_EDID;
- /* accel bits */
- u32 dp_gui_mc_base;
- u32 dp_gui_mc_cache;
- u32 dp_cntl_cache;
- u32 dp_brush_fg_cache;
- u32 dp_brush_bg_cache;
- u32 dp_src_fg_cache;
- u32 dp_src_bg_cache;
- u32 fifo_free;
+ u32 dp_gui_master_cntl;
struct pll_info pll;
int lock_blank;
int dynclk;
int no_schedule;
- int gfx_mode;
enum radeon_pm_mode pm_mode;
reinit_function_ptr reinit_func;
#define OUTREG8(addr,val) writeb(val, (rinfo->mmio_base)+addr)
#define INREG16(addr) readw((rinfo->mmio_base)+addr)
#define OUTREG16(addr,val) writew(val, (rinfo->mmio_base)+addr)
-
-#ifdef CONFIG_PPC
-#define INREG(addr) ({ eieio(); ld_le32(rinfo->mmio_base+(addr)); })
-#define OUTREG(addr,val) do { eieio(); st_le32(rinfo->mmio_base+(addr),(val)); } while(0)
-#else
#define INREG(addr) readl((rinfo->mmio_base)+addr)
#define OUTREG(addr,val) writel(val, (rinfo->mmio_base)+addr)
-#endif
static inline void _OUTREGP(struct radeonfb_info *rinfo, u32 addr,
u32 val, u32 mask)
* 2D Engine helper routines
*/
-extern void radeon_fifo_update_and_wait(struct radeonfb_info *rinfo, int entries);
+static inline void _radeon_fifo_wait(struct radeonfb_info *rinfo, int entries)
+{
+ int i;
+
+ for (i=0; i<2000000; i++) {
+ if ((INREG(RBBM_STATUS) & 0x7f) >= entries)
+ return;
+ udelay(1);
+ }
+ printk(KERN_ERR "radeonfb: FIFO Timeout !\n");
+}
static inline void radeon_engine_flush (struct radeonfb_info *rinfo)
{
/* Ensure FIFO is empty, ie, make sure the flush commands
* has reached the cache
*/
- radeon_fifo_update_and_wait(rinfo, 64);
+ _radeon_fifo_wait (rinfo, 64);
/* Wait for the flush to complete */
for (i=0; i < 2000000; i++) {
}
-static inline void radeon_engine_idle(struct radeonfb_info *rinfo)
+static inline void _radeon_engine_idle(struct radeonfb_info *rinfo)
{
int i;
/* ensure FIFO is empty before waiting for idle */
- radeon_fifo_update_and_wait (rinfo, 64);
+ _radeon_fifo_wait (rinfo, 64);
for (i=0; i<2000000; i++) {
if (((INREG(RBBM_STATUS) & GUI_ACTIVE)) == 0) {
}
+#define radeon_engine_idle() _radeon_engine_idle(rinfo)
+#define radeon_fifo_wait(entries) _radeon_fifo_wait(rinfo,entries)
#define radeon_msleep(ms) _radeon_msleep(rinfo,ms)
extern int radeonfb_sync(struct fb_info *info);
extern void radeonfb_engine_init (struct radeonfb_info *rinfo);
extern void radeonfb_engine_reset(struct radeonfb_info *rinfo);
-extern void radeon_fixup_mem_offset(struct radeonfb_info *rinfo);
/* Other functions */
extern int radeon_screen_blank(struct radeonfb_info *rinfo, int blank, int mode_switch);
static inline void radeonfb_bl_exit(struct radeonfb_info *rinfo) {}
#endif
-extern int accel_cexp;
-
#endif /* __RADEONFB_H__ */
{
NAPI_STATE_SCHED, /* Poll is scheduled */
NAPI_STATE_DISABLE, /* Disable pending */
+ NAPI_STATE_NPSVC, /* Netpoll - don't dequeue from poll_list */
};
extern void __napi_schedule(struct napi_struct *n);
{
unsigned long flags;
+ /*
+ * don't let napi dequeue from the cpu poll list
+ * just in case its running on a different cpu
+ */
+ if (unlikely(test_bit(NAPI_STATE_NPSVC, &napi->state)))
+ return;
local_irq_save(flags);
__netif_rx_complete(dev, napi);
local_irq_restore(flags);
})
#define smp_call_function_mask(mask, func, info, wait) \
(up_smp_call_function(func, info))
+#define smp_call_function_many(mask, func, info, wait) \
+ (up_smp_call_function(func, info))
static inline void init_call_single_data(void)
{
}
#define CRTC_DISPLAY_DIS (1 << 10)
#define CRTC_CRT_ON (1 << 15)
-/* DSTCACHE_MODE bits constants */
-#define RB2D_DC_AUTOFLUSH_ENABLE (1 << 8)
-#define RB2D_DC_DC_DISABLE_IGNORE_PE (1 << 17)
/* DSTCACHE_CTLSTAT bit constants */
#define RB2D_DC_FLUSH_2D (1 << 0)
#define GMC_DST_16BPP_YVYU422 0x00000c00
#define GMC_DST_32BPP_AYUV444 0x00000e00
#define GMC_DST_16BPP_ARGB4444 0x00000f00
+#define GMC_SRC_MONO 0x00000000
+#define GMC_SRC_MONO_LBKGD 0x00001000
+#define GMC_SRC_DSTCOLOR 0x00003000
#define GMC_BYTE_ORDER_MSB_TO_LSB 0x00000000
#define GMC_BYTE_ORDER_LSB_TO_MSB 0x00004000
#define GMC_DP_CONVERSION_TEMP_9300 0x00008000
#define GMC_DP_CONVERSION_TEMP_6500 0x00000000
+#define GMC_DP_SRC_RECT 0x02000000
+#define GMC_DP_SRC_HOST 0x03000000
#define GMC_DP_SRC_HOST_BYTEALIGN 0x04000000
#define GMC_3D_FCN_EN_CLR 0x00000000
#define GMC_3D_FCN_EN_SET 0x08000000
#define GMC_WRITE_MASK_LEAVE 0x00000000
#define GMC_WRITE_MASK_SET 0x40000000
#define GMC_CLR_CMP_CNTL_DIS (1 << 28)
-#define GMC_SRC_DATATYPE_MASK (3 << 12)
-#define GMC_SRC_DATATYPE_MONO_FG_BG (0 << 12)
-#define GMC_SRC_DATATYPE_MONO_FG_LA (1 << 12)
#define GMC_SRC_DATATYPE_COLOR (3 << 12)
#define ROP3_S 0x00cc0000
#define ROP3_SRCCOPY 0x00cc0000
#define DP_SRC_SOURCE_MASK (7 << 24)
#define GMC_BRUSH_NONE (15 << 4)
#define DP_SRC_SOURCE_MEMORY (2 << 24)
-#define DP_SRC_SOURCE_HOST_DATA (3 << 24)
#define GMC_BRUSH_SOLIDCOLOR 0x000000d0
/* DP_MIX bit constants */
#define DISP_PWR_MAN_TV_ENABLE_RST (1 << 25)
#define DISP_PWR_MAN_AUTO_PWRUP_EN (1 << 26)
-/* RBBM_GUICNTL constants */
-#define RBBM_GUICNTL_HOST_DATA_SWAP_NONE (0 << 0)
-#define RBBM_GUICNTL_HOST_DATA_SWAP_16BIT (1 << 0)
-#define RBBM_GUICNTL_HOST_DATA_SWAP_32BIT (2 << 0)
-#define RBBM_GUICNTL_HOST_DATA_SWAP_HDW (3 << 0)
-
/* masks */
#define CONFIG_MEMSIZE_MASK 0x1f000000
* any child cgroups exist. This is theoretically supportable
* but involves complex error handling, so it's being left until
* later */
- if (!list_empty(&cgrp->children))
+ if (root->number_of_cgroups > 1)
return -EBUSY;
/* Process each subsystem */
/*
* scd->clock = clamp(scd->tick_gtod + delta,
- * max(scd->tick_gtod, scd->clock),
- * max(scd->clock, scd->tick_gtod + TICK_NSEC));
+ * max(scd->tick_gtod, scd->clock),
+ * scd->tick_gtod + TICK_NSEC);
*/
clock = scd->tick_gtod + delta;
min_clock = wrap_max(scd->tick_gtod, scd->clock);
- max_clock = wrap_max(scd->clock, scd->tick_gtod + TICK_NSEC);
+ max_clock = scd->tick_gtod + TICK_NSEC;
clock = wrap_max(clock, min_clock);
clock = wrap_min(clock, max_clock);
unsigned long addr = (unsigned long)(*pages);
struct vm_area_struct *vma;
struct page *page;
- int err;
+ int err = -EFAULT;
vma = find_vma(mm, addr);
if (!vma)
struct kmem_cache *c;
c = slob_alloc(sizeof(struct kmem_cache),
- flags, ARCH_KMALLOC_MINALIGN, -1);
+ GFP_KERNEL, ARCH_KMALLOC_MINALIGN, -1);
if (c) {
c->name = name;
npinfo->rx_flags |= NETPOLL_RX_DROP;
atomic_inc(&trapped);
+ set_bit(NAPI_STATE_NPSVC, &napi->state);
work = napi->poll(napi, budget);
+ clear_bit(NAPI_STATE_NPSVC, &napi->state);
atomic_dec(&trapped);
npinfo->rx_flags &= ~NETPOLL_RX_DROP;
static struct xt_table nat_table = {
.name = "nat",
.valid_hooks = NAT_VALID_HOOKS,
- .lock = __RW_LOCK_UNLOCKED(__nat_table.lock),
+ .lock = __RW_LOCK_UNLOCKED(nat_table.lock),
.me = THIS_MODULE,
.af = AF_INET,
};
#include "tcp_vegas.h"
-/* Default values of the Vegas variables, in fixed-point representation
- * with V_PARAM_SHIFT bits to the right of the binary point.
- */
-#define V_PARAM_SHIFT 1
-static int alpha = 2<<V_PARAM_SHIFT;
-static int beta = 4<<V_PARAM_SHIFT;
-static int gamma = 1<<V_PARAM_SHIFT;
+static int alpha = 2;
+static int beta = 4;
+static int gamma = 1;
module_param(alpha, int, 0644);
-MODULE_PARM_DESC(alpha, "lower bound of packets in network (scale by 2)");
+MODULE_PARM_DESC(alpha, "lower bound of packets in network");
module_param(beta, int, 0644);
-MODULE_PARM_DESC(beta, "upper bound of packets in network (scale by 2)");
+MODULE_PARM_DESC(beta, "upper bound of packets in network");
module_param(gamma, int, 0644);
MODULE_PARM_DESC(gamma, "limit on increase (scale by 2)");
return;
}
- /* The key players are v_beg_snd_una and v_beg_snd_nxt.
- *
- * These are so named because they represent the approximate values
- * of snd_una and snd_nxt at the beginning of the current RTT. More
- * precisely, they represent the amount of data sent during the RTT.
- * At the end of the RTT, when we receive an ACK for v_beg_snd_nxt,
- * we will calculate that (v_beg_snd_nxt - v_beg_snd_una) outstanding
- * bytes of data have been ACKed during the course of the RTT, giving
- * an "actual" rate of:
- *
- * (v_beg_snd_nxt - v_beg_snd_una) / (rtt duration)
- *
- * Unfortunately, v_beg_snd_una is not exactly equal to snd_una,
- * because delayed ACKs can cover more than one segment, so they
- * don't line up nicely with the boundaries of RTTs.
- *
- * Another unfortunate fact of life is that delayed ACKs delay the
- * advance of the left edge of our send window, so that the number
- * of bytes we send in an RTT is often less than our cwnd will allow.
- * So we keep track of our cwnd separately, in v_beg_snd_cwnd.
- */
-
if (after(ack, vegas->beg_snd_nxt)) {
/* Do the Vegas once-per-RTT cwnd adjustment. */
- u32 old_wnd, old_snd_cwnd;
-
-
- /* Here old_wnd is essentially the window of data that was
- * sent during the previous RTT, and has all
- * been acknowledged in the course of the RTT that ended
- * with the ACK we just received. Likewise, old_snd_cwnd
- * is the cwnd during the previous RTT.
- */
- old_wnd = (vegas->beg_snd_nxt - vegas->beg_snd_una) /
- tp->mss_cache;
- old_snd_cwnd = vegas->beg_snd_cwnd;
/* Save the extent of the current window so we can use this
* at the end of the next RTT.
*/
- vegas->beg_snd_una = vegas->beg_snd_nxt;
vegas->beg_snd_nxt = tp->snd_nxt;
- vegas->beg_snd_cwnd = tp->snd_cwnd;
/* We do the Vegas calculations only if we got enough RTT
* samples that we can be reasonably sure that we got
*
* This is:
* (actual rate in segments) * baseRTT
- * We keep it as a fixed point number with
- * V_PARAM_SHIFT bits to the right of the binary point.
*/
- target_cwnd = ((u64)old_wnd * vegas->baseRTT);
- target_cwnd <<= V_PARAM_SHIFT;
- do_div(target_cwnd, rtt);
+ target_cwnd = tp->snd_cwnd * vegas->baseRTT / rtt;
/* Calculate the difference between the window we had,
* and the window we would like to have. This quantity
* is the "Diff" from the Arizona Vegas papers.
- *
- * Again, this is a fixed point number with
- * V_PARAM_SHIFT bits to the right of the binary
- * point.
*/
- diff = (old_wnd << V_PARAM_SHIFT) - target_cwnd;
+ diff = tp->snd_cwnd * (rtt-vegas->baseRTT) / vegas->baseRTT;
if (diff > gamma && tp->snd_ssthresh > 2 ) {
/* Going too fast. Time to slow down
* truncation robs us of full link
* utilization.
*/
- tp->snd_cwnd = min(tp->snd_cwnd,
- ((u32)target_cwnd >>
- V_PARAM_SHIFT)+1);
+ tp->snd_cwnd = min(tp->snd_cwnd, (u32)target_cwnd+1);
} else if (tp->snd_cwnd <= tp->snd_ssthresh) {
/* Slow start. */
tcp_slow_start(tp);
} else {
/* Congestion avoidance. */
- u32 next_snd_cwnd;
/* Figure out where we would like cwnd
* to be.
/* The old window was too fast, so
* we slow down.
*/
- next_snd_cwnd = old_snd_cwnd - 1;
+ tp->snd_cwnd--;
} else if (diff < alpha) {
/* We don't have enough extra packets
* in the network, so speed up.
*/
- next_snd_cwnd = old_snd_cwnd + 1;
+ tp->snd_cwnd++;
} else {
/* Sending just as fast as we
* should be.
*/
- next_snd_cwnd = old_snd_cwnd;
}
-
- /* Adjust cwnd upward or downward, toward the
- * desired value.
- */
- if (next_snd_cwnd > tp->snd_cwnd)
- tp->snd_cwnd++;
- else if (next_snd_cwnd < tp->snd_cwnd)
- tp->snd_cwnd--;
}
if (tp->snd_cwnd < 2)
is invalid, but ndisc specs say nothing
about it. It could be misconfiguration, or
an smart proxy agent tries to help us :-)
+
+ We should not print the error if NA has been
+ received from loopback - it is just our own
+ unsolicited advertisement.
*/
- ND_PRINTK1(KERN_WARNING
+ if (skb->pkt_type != PACKET_LOOPBACK)
+ ND_PRINTK1(KERN_WARNING
"ICMPv6 NA: someone advertises our address on %s!\n",
ifp->idev->dev->name);
in6_ifa_put(ifp);
const struct in_addr *mask,
struct netlbl_audit *audit_info)
{
- int ret_val = 0;
struct netlbl_af4list *list_entry;
struct netlbl_unlhsh_addr4 *entry;
struct audit_buffer *audit_buf;
if (list_entry != NULL)
entry = netlbl_unlhsh_addr4_entry(list_entry);
else
- ret_val = -ENOENT;
+ entry = NULL;
audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL,
audit_info);
addr->s_addr, mask->s_addr);
if (dev != NULL)
dev_put(dev);
- if (entry && security_secid_to_secctx(entry->secid,
- &secctx,
- &secctx_len) == 0) {
+ if (entry != NULL &&
+ security_secid_to_secctx(entry->secid,
+ &secctx, &secctx_len) == 0) {
audit_log_format(audit_buf, " sec_obj=%s", secctx);
security_release_secctx(secctx, secctx_len);
}
- audit_log_format(audit_buf, " res=%u", ret_val == 0 ? 1 : 0);
+ audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0);
audit_log_end(audit_buf);
}
- if (ret_val == 0)
- call_rcu(&entry->rcu, netlbl_unlhsh_free_addr4);
- return ret_val;
+ if (entry == NULL)
+ return -ENOENT;
+
+ call_rcu(&entry->rcu, netlbl_unlhsh_free_addr4);
+ return 0;
}
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
const struct in6_addr *mask,
struct netlbl_audit *audit_info)
{
- int ret_val = 0;
struct netlbl_af6list *list_entry;
struct netlbl_unlhsh_addr6 *entry;
struct audit_buffer *audit_buf;
if (list_entry != NULL)
entry = netlbl_unlhsh_addr6_entry(list_entry);
else
- ret_val = -ENOENT;
+ entry = NULL;
audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL,
audit_info);
addr, mask);
if (dev != NULL)
dev_put(dev);
- if (entry && security_secid_to_secctx(entry->secid,
- &secctx,
- &secctx_len) == 0) {
+ if (entry != NULL &&
+ security_secid_to_secctx(entry->secid,
+ &secctx, &secctx_len) == 0) {
audit_log_format(audit_buf, " sec_obj=%s", secctx);
security_release_secctx(secctx, secctx_len);
}
- audit_log_format(audit_buf, " res=%u", ret_val == 0 ? 1 : 0);
+ audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0);
audit_log_end(audit_buf);
}
- if (ret_val == 0)
- call_rcu(&entry->rcu, netlbl_unlhsh_free_addr6);
- return ret_val;
+ if (entry == NULL)
+ return -ENOENT;
+
+ call_rcu(&entry->rcu, netlbl_unlhsh_free_addr6);
+ return 0;
}
#endif /* IPv6 */
static void gprs_write_space(struct sock *sk)
{
struct gprs_dev *dev = sk->sk_user_data;
+ struct net_device *net = dev->net;
unsigned credits = pep_writeable(sk);
spin_lock_bh(&dev->tx_lock);
dev->tx_max = credits;
- if (credits > skb_queue_len(&dev->tx_queue))
- netif_wake_queue(dev->net);
+ if (credits > skb_queue_len(&dev->tx_queue) && netif_running(net))
+ netif_wake_queue(net);
spin_unlock_bh(&dev->tx_lock);
}
* Network device callbacks
*/
+static int gprs_open(struct net_device *dev)
+{
+ struct gprs_dev *gp = netdev_priv(dev);
+
+ gprs_write_space(gp->sk);
+ return 0;
+}
+
+static int gprs_close(struct net_device *dev)
+{
+ struct gprs_dev *gp = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+ flush_work(&gp->tx_work);
+ return 0;
+}
+
static int gprs_xmit(struct sk_buff *skb, struct net_device *net)
{
struct gprs_dev *dev = netdev_priv(net);
net->tx_queue_len = 10;
net->destructor = free_netdev;
+ net->open = gprs_open;
+ net->stop = gprs_close;
net->hard_start_xmit = gprs_xmit; /* mandatory */
net->change_mtu = gprs_set_mtu;
net->get_stats = gprs_get_stats;
dev->sk = sk;
printk(KERN_DEBUG"%s: attached\n", net->name);
- gprs_write_space(sk); /* kick off TX */
return net->ifindex;
out_rel:
printk(KERN_DEBUG"%s: detached\n", net->name);
unregister_netdev(net);
- flush_scheduled_work();
sock_put(sk);
- skb_queue_purge(&dev->tx_queue);
}
layering other disciplines. It does not need to do bandwidth
control either since that can be handled by using token
bucket or other rate control.
-
- The simulator is limited by the Linux timer resolution
- and will create packet bursts on the HZ boundary (1ms).
*/
struct netem_sched_data {
projects / linux-2.6-omap-h63xx.git / commitdiff