* 'v28-range-hrtimers-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits)
hrtimers: add missing docbook comments to struct hrtimer
hrtimers: simplify hrtimer_peek_ahead_timers()
hrtimers: fix docbook comments
DECLARE_PER_CPU needs linux/percpu.h
hrtimers: fix typo
rangetimers: fix the bug reported by Ingo for real
rangetimer: fix BUG_ON reported by Ingo
rangetimer: fix x86 build failure for the !HRTIMERS case
select: fix alpha OSF wrapper
select: fix alpha OSF wrapper
hrtimer: peek at the timer queue just before going idle
hrtimer: make the futex() system call use the per process slack value
hrtimer: make the nanosleep() syscall use the per process slack
hrtimer: fix signed/unsigned bug in slack estimator
hrtimer: show the timer ranges in /proc/timer_list
hrtimer: incorporate feedback from Peter Zijlstra
hrtimer: add a hrtimer_start_range() function
hrtimer: another build fix
hrtimer: fix build bug found by Ingo
hrtimer: make select() and poll() use the hrtimer range feature
...
osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp,
struct timeval32 __user *tvp)
{
- s64 timeout = MAX_SCHEDULE_TIMEOUT;
+ struct timespec end_time, *to = NULL;
if (tvp) {
time_t sec, usec;
+ to = &end_time;
+
if (!access_ok(VERIFY_READ, tvp, sizeof(*tvp))
|| __get_user(sec, &tvp->tv_sec)
|| __get_user(usec, &tvp->tv_usec)) {
if (sec < 0 || usec < 0)
return -EINVAL;
- if ((unsigned long) sec < MAX_SELECT_SECONDS) {
- timeout = (usec + 1000000/HZ - 1) / (1000000/HZ);
- timeout += sec * (unsigned long) HZ;
- }
+ if (poll_select_set_timeout(to, sec, usec * NSEC_PER_USEC))
+ return -EINVAL;
+
}
/* OSF does not copy back the remaining time. */
- return core_sys_select(n, inp, outp, exp, &timeout);
+ return core_sys_select(n, inp, outp, exp, to);
}
struct rusage32 {
struct hrtimer *p_ht = &vcpu->arch.hlt_timer;
if (hrtimer_cancel(p_ht))
- hrtimer_start(p_ht, p_ht->expires, HRTIMER_MODE_ABS);
+ hrtimer_start_expires(p_ht, HRTIMER_MODE_ABS);
}
static enum hrtimer_restart hlt_timer_fn(struct hrtimer *data)
pr_debug("timer resolution: %lu\n", TICK_NSEC);
kt = ktime_set(0, profiling_interval);
hrtimer_init(&timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
- timer.expires = kt;
+ hrtimer_set_expires(&timer, kt);
timer.function = profile_spus;
/* Allocate arrays for collecting SPU PC samples */
if (vcpu0 && waitqueue_active(&vcpu0->wq))
wake_up_interruptible(&vcpu0->wq);
- pt->timer.expires = ktime_add_ns(pt->timer.expires, pt->period);
- pt->scheduled = ktime_to_ns(pt->timer.expires);
+ hrtimer_add_expires_ns(&pt->timer, pt->period);
+ pt->scheduled = hrtimer_get_expires_ns(&pt->timer);
if (pt->period)
- ps->channels[0].count_load_time = pt->timer.expires;
+ ps->channels[0].count_load_time = hrtimer_get_expires(&pt->timer);
return (pt->period == 0 ? 0 : 1);
}
timer = &pit->pit_state.pit_timer.timer;
if (hrtimer_cancel(timer))
- hrtimer_start(timer, timer->expires, HRTIMER_MODE_ABS);
+ hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
}
static void destroy_pit_timer(struct kvm_kpit_timer *pt)
if (apic_lvtt_period(apic)) {
result = 1;
- apic->timer.dev.expires = ktime_add_ns(
- apic->timer.dev.expires,
- apic->timer.period);
+ hrtimer_add_expires_ns(&apic->timer.dev, apic->timer.period);
}
return result;
}
timer = &apic->timer.dev;
if (hrtimer_cancel(timer))
- hrtimer_start(timer, timer->expires, HRTIMER_MODE_ABS);
+ hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
}
void kvm_lapic_sync_from_vapic(struct kvm_vcpu *vcpu)
#include <linux/cpu.h>
#include <linux/cpuidle.h>
#include <linux/ktime.h>
+#include <linux/hrtimer.h>
#include "cpuidle.h"
return;
}
+ /*
+ * run any timers that can be run now, at this point
+ * before calculating the idle duration etc.
+ */
+ hrtimer_peek_ahead_timers();
+
/* ask the governor for the next state */
next_state = cpuidle_curr_governor->select(dev);
if (need_resched())
hr_time = ktime_set(0, poll_timeout);
if (!hrtimer_is_queued(&ap_poll_timer) ||
- !hrtimer_forward(&ap_poll_timer, ap_poll_timer.expires, hr_time)) {
- ap_poll_timer.expires = hr_time;
- hrtimer_start(&ap_poll_timer, hr_time, HRTIMER_MODE_ABS);
+ !hrtimer_forward(&ap_poll_timer, hrtimer_get_expires(&ap_poll_timer), hr_time)) {
+ hrtimer_set_expires(&ap_poll_timer, hr_time);
+ hrtimer_start_expires(&ap_poll_timer, HRTIMER_MODE_ABS);
}
return count;
}
#define __COMPAT_NFDBITS (8 * sizeof(compat_ulong_t))
+static int poll_select_copy_remaining(struct timespec *end_time, void __user *p,
+ int timeval, int ret)
+{
+ struct timespec ts;
+
+ if (!p)
+ return ret;
+
+ if (current->personality & STICKY_TIMEOUTS)
+ goto sticky;
+
+ /* No update for zero timeout */
+ if (!end_time->tv_sec && !end_time->tv_nsec)
+ return ret;
+
+ ktime_get_ts(&ts);
+ ts = timespec_sub(*end_time, ts);
+ if (ts.tv_sec < 0)
+ ts.tv_sec = ts.tv_nsec = 0;
+
+ if (timeval) {
+ struct compat_timeval rtv;
+
+ rtv.tv_sec = ts.tv_sec;
+ rtv.tv_usec = ts.tv_nsec / NSEC_PER_USEC;
+
+ if (!copy_to_user(p, &rtv, sizeof(rtv)))
+ return ret;
+ } else {
+ struct compat_timespec rts;
+
+ rts.tv_sec = ts.tv_sec;
+ rts.tv_nsec = ts.tv_nsec;
+
+ if (!copy_to_user(p, &rts, sizeof(rts)))
+ return ret;
+ }
+ /*
+ * If an application puts its timeval in read-only memory, we
+ * don't want the Linux-specific update to the timeval to
+ * cause a fault after the select has completed
+ * successfully. However, because we're not updating the
+ * timeval, we can't restart the system call.
+ */
+
+sticky:
+ if (ret == -ERESTARTNOHAND)
+ ret = -EINTR;
+ return ret;
+}
+
/*
* Ooo, nasty. We need here to frob 32-bit unsigned longs to
* 64-bit unsigned longs.
((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1)
int compat_core_sys_select(int n, compat_ulong_t __user *inp,
- compat_ulong_t __user *outp, compat_ulong_t __user *exp, s64 *timeout)
+ compat_ulong_t __user *outp, compat_ulong_t __user *exp,
+ struct timespec *end_time)
{
fd_set_bits fds;
void *bits;
zero_fd_set(n, fds.res_out);
zero_fd_set(n, fds.res_ex);
- ret = do_select(n, &fds, timeout);
+ ret = do_select(n, &fds, end_time);
if (ret < 0)
goto out;
compat_ulong_t __user *outp, compat_ulong_t __user *exp,
struct compat_timeval __user *tvp)
{
- s64 timeout = -1;
+ struct timespec end_time, *to = NULL;
struct compat_timeval tv;
int ret;
if (copy_from_user(&tv, tvp, sizeof(tv)))
return -EFAULT;
- if (tv.tv_sec < 0 || tv.tv_usec < 0)
+ to = &end_time;
+ if (poll_select_set_timeout(to, tv.tv_sec,
+ tv.tv_usec * NSEC_PER_USEC))
return -EINVAL;
-
- /* Cast to u64 to make GCC stop complaining */
- if ((u64)tv.tv_sec >= (u64)MAX_INT64_SECONDS)
- timeout = -1; /* infinite */
- else {
- timeout = DIV_ROUND_UP(tv.tv_usec, 1000000/HZ);
- timeout += tv.tv_sec * HZ;
- }
}
- ret = compat_core_sys_select(n, inp, outp, exp, &timeout);
-
- if (tvp) {
- struct compat_timeval rtv;
-
- if (current->personality & STICKY_TIMEOUTS)
- goto sticky;
- rtv.tv_usec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ));
- rtv.tv_sec = timeout;
- if (compat_timeval_compare(&rtv, &tv) >= 0)
- rtv = tv;
- if (copy_to_user(tvp, &rtv, sizeof(rtv))) {
-sticky:
- /*
- * If an application puts its timeval in read-only
- * memory, we don't want the Linux-specific update to
- * the timeval to cause a fault after the select has
- * completed successfully. However, because we're not
- * updating the timeval, we can't restart the system
- * call.
- */
- if (ret == -ERESTARTNOHAND)
- ret = -EINTR;
- }
- }
+ ret = compat_core_sys_select(n, inp, outp, exp, to);
+ ret = poll_select_copy_remaining(&end_time, tvp, 1, ret);
return ret;
}
{
compat_sigset_t ss32;
sigset_t ksigmask, sigsaved;
- s64 timeout = MAX_SCHEDULE_TIMEOUT;
struct compat_timespec ts;
+ struct timespec end_time, *to = NULL;
int ret;
if (tsp) {
if (copy_from_user(&ts, tsp, sizeof(ts)))
return -EFAULT;
- if (ts.tv_sec < 0 || ts.tv_nsec < 0)
+ to = &end_time;
+ if (poll_select_set_timeout(to, ts.tv_sec, ts.tv_nsec))
return -EINVAL;
}
sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
}
- do {
- if (tsp) {
- if ((unsigned long)ts.tv_sec < MAX_SELECT_SECONDS) {
- timeout = DIV_ROUND_UP(ts.tv_nsec, 1000000000/HZ);
- timeout += ts.tv_sec * (unsigned long)HZ;
- ts.tv_sec = 0;
- ts.tv_nsec = 0;
- } else {
- ts.tv_sec -= MAX_SELECT_SECONDS;
- timeout = MAX_SELECT_SECONDS * HZ;
- }
- }
-
- ret = compat_core_sys_select(n, inp, outp, exp, &timeout);
-
- } while (!ret && !timeout && tsp && (ts.tv_sec || ts.tv_nsec));
-
- if (tsp) {
- struct compat_timespec rts;
-
- if (current->personality & STICKY_TIMEOUTS)
- goto sticky;
-
- rts.tv_sec = timeout / HZ;
- rts.tv_nsec = (timeout % HZ) * (NSEC_PER_SEC/HZ);
- if (rts.tv_nsec >= NSEC_PER_SEC) {
- rts.tv_sec++;
- rts.tv_nsec -= NSEC_PER_SEC;
- }
- if (compat_timespec_compare(&rts, &ts) >= 0)
- rts = ts;
- if (copy_to_user(tsp, &rts, sizeof(rts))) {
-sticky:
- /*
- * If an application puts its timeval in read-only
- * memory, we don't want the Linux-specific update to
- * the timeval to cause a fault after the select has
- * completed successfully. However, because we're not
- * updating the timeval, we can't restart the system
- * call.
- */
- if (ret == -ERESTARTNOHAND)
- ret = -EINTR;
- }
- }
+ ret = compat_core_sys_select(n, inp, outp, exp, to);
+ ret = poll_select_copy_remaining(&end_time, tsp, 0, ret);
if (ret == -ERESTARTNOHAND) {
/*
compat_sigset_t ss32;
sigset_t ksigmask, sigsaved;
struct compat_timespec ts;
- s64 timeout = -1;
+ struct timespec end_time, *to = NULL;
int ret;
if (tsp) {
if (copy_from_user(&ts, tsp, sizeof(ts)))
return -EFAULT;
- /* We assume that ts.tv_sec is always lower than
- the number of seconds that can be expressed in
- an s64. Otherwise the compiler bitches at us */
- timeout = DIV_ROUND_UP(ts.tv_nsec, 1000000000/HZ);
- timeout += ts.tv_sec * HZ;
+ to = &end_time;
+ if (poll_select_set_timeout(to, ts.tv_sec, ts.tv_nsec))
+ return -EINVAL;
}
if (sigmask) {
sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
}
- ret = do_sys_poll(ufds, nfds, &timeout);
+ ret = do_sys_poll(ufds, nfds, to);
/* We can restart this syscall, usually */
if (ret == -EINTR) {
} else if (sigmask)
sigprocmask(SIG_SETMASK, &sigsaved, NULL);
- if (tsp && timeout >= 0) {
- struct compat_timespec rts;
-
- if (current->personality & STICKY_TIMEOUTS)
- goto sticky;
- /* Yes, we know it's actually an s64, but it's also positive. */
- rts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) *
- 1000;
- rts.tv_sec = timeout;
- if (compat_timespec_compare(&rts, &ts) >= 0)
- rts = ts;
- if (copy_to_user(tsp, &rts, sizeof(rts))) {
-sticky:
- /*
- * If an application puts its timeval in read-only
- * memory, we don't want the Linux-specific update to
- * the timeval to cause a fault after the select has
- * completed successfully. However, because we're not
- * updating the timeval, we can't restart the system
- * call.
- */
- if (ret == -ERESTARTNOHAND && timeout >= 0)
- ret = -EINTR;
- }
- }
+ ret = poll_select_copy_remaining(&end_time, tsp, 0, ret);
return ret;
}
#include <linux/fdtable.h>
#include <linux/fs.h>
#include <linux/rcupdate.h>
+#include <linux/hrtimer.h>
#include <asm/uaccess.h>
+
+/*
+ * Estimate expected accuracy in ns from a timeval.
+ *
+ * After quite a bit of churning around, we've settled on
+ * a simple thing of taking 0.1% of the timeout as the
+ * slack, with a cap of 100 msec.
+ * "nice" tasks get a 0.5% slack instead.
+ *
+ * Consider this comment an open invitation to come up with even
+ * better solutions..
+ */
+
+static long __estimate_accuracy(struct timespec *tv)
+{
+ long slack;
+ int divfactor = 1000;
+
+ if (task_nice(current) > 0)
+ divfactor = divfactor / 5;
+
+ slack = tv->tv_nsec / divfactor;
+ slack += tv->tv_sec * (NSEC_PER_SEC/divfactor);
+
+ if (slack > 100 * NSEC_PER_MSEC)
+ slack = 100 * NSEC_PER_MSEC;
+
+ if (slack < 0)
+ slack = 0;
+ return slack;
+}
+
+static long estimate_accuracy(struct timespec *tv)
+{
+ unsigned long ret;
+ struct timespec now;
+
+ /*
+ * Realtime tasks get a slack of 0 for obvious reasons.
+ */
+
+ if (rt_task(current))
+ return 0;
+
+ ktime_get_ts(&now);
+ now = timespec_sub(*tv, now);
+ ret = __estimate_accuracy(&now);
+ if (ret < current->timer_slack_ns)
+ return current->timer_slack_ns;
+ return ret;
+}
+
+
+
struct poll_table_page {
struct poll_table_page * next;
struct poll_table_entry * entry;
add_wait_queue(wait_address, &entry->wait);
}
+/**
+ * poll_select_set_timeout - helper function to setup the timeout value
+ * @to: pointer to timespec variable for the final timeout
+ * @sec: seconds (from user space)
+ * @nsec: nanoseconds (from user space)
+ *
+ * Note, we do not use a timespec for the user space value here, That
+ * way we can use the function for timeval and compat interfaces as well.
+ *
+ * Returns -EINVAL if sec/nsec are not normalized. Otherwise 0.
+ */
+int poll_select_set_timeout(struct timespec *to, long sec, long nsec)
+{
+ struct timespec ts = {.tv_sec = sec, .tv_nsec = nsec};
+
+ if (!timespec_valid(&ts))
+ return -EINVAL;
+
+ /* Optimize for the zero timeout value here */
+ if (!sec && !nsec) {
+ to->tv_sec = to->tv_nsec = 0;
+ } else {
+ ktime_get_ts(to);
+ *to = timespec_add_safe(*to, ts);
+ }
+ return 0;
+}
+
+static int poll_select_copy_remaining(struct timespec *end_time, void __user *p,
+ int timeval, int ret)
+{
+ struct timespec rts;
+ struct timeval rtv;
+
+ if (!p)
+ return ret;
+
+ if (current->personality & STICKY_TIMEOUTS)
+ goto sticky;
+
+ /* No update for zero timeout */
+ if (!end_time->tv_sec && !end_time->tv_nsec)
+ return ret;
+
+ ktime_get_ts(&rts);
+ rts = timespec_sub(*end_time, rts);
+ if (rts.tv_sec < 0)
+ rts.tv_sec = rts.tv_nsec = 0;
+
+ if (timeval) {
+ rtv.tv_sec = rts.tv_sec;
+ rtv.tv_usec = rts.tv_nsec / NSEC_PER_USEC;
+
+ if (!copy_to_user(p, &rtv, sizeof(rtv)))
+ return ret;
+
+ } else if (!copy_to_user(p, &rts, sizeof(rts)))
+ return ret;
+
+ /*
+ * If an application puts its timeval in read-only memory, we
+ * don't want the Linux-specific update to the timeval to
+ * cause a fault after the select has completed
+ * successfully. However, because we're not updating the
+ * timeval, we can't restart the system call.
+ */
+
+sticky:
+ if (ret == -ERESTARTNOHAND)
+ ret = -EINTR;
+ return ret;
+}
+
#define FDS_IN(fds, n) (fds->in + n)
#define FDS_OUT(fds, n) (fds->out + n)
#define FDS_EX(fds, n) (fds->ex + n)
#define POLLOUT_SET (POLLWRBAND | POLLWRNORM | POLLOUT | POLLERR)
#define POLLEX_SET (POLLPRI)
-int do_select(int n, fd_set_bits *fds, s64 *timeout)
+int do_select(int n, fd_set_bits *fds, struct timespec *end_time)
{
+ ktime_t expire, *to = NULL;
struct poll_wqueues table;
poll_table *wait;
- int retval, i;
+ int retval, i, timed_out = 0;
+ unsigned long slack = 0;
rcu_read_lock();
retval = max_select_fd(n, fds);
poll_initwait(&table);
wait = &table.pt;
- if (!*timeout)
+ if (end_time && !end_time->tv_sec && !end_time->tv_nsec) {
wait = NULL;
+ timed_out = 1;
+ }
+
+ if (end_time && !timed_out)
+ slack = estimate_accuracy(end_time);
+
retval = 0;
for (;;) {
unsigned long *rinp, *routp, *rexp, *inp, *outp, *exp;
- long __timeout;
set_current_state(TASK_INTERRUPTIBLE);
cond_resched();
}
wait = NULL;
- if (retval || !*timeout || signal_pending(current))
+ if (retval || timed_out || signal_pending(current))
break;
if (table.error) {
retval = table.error;
break;
}
- if (*timeout < 0) {
- /* Wait indefinitely */
- __timeout = MAX_SCHEDULE_TIMEOUT;
- } else if (unlikely(*timeout >= (s64)MAX_SCHEDULE_TIMEOUT - 1)) {
- /* Wait for longer than MAX_SCHEDULE_TIMEOUT. Do it in a loop */
- __timeout = MAX_SCHEDULE_TIMEOUT - 1;
- *timeout -= __timeout;
- } else {
- __timeout = *timeout;
- *timeout = 0;
+ /*
+ * If this is the first loop and we have a timeout
+ * given, then we convert to ktime_t and set the to
+ * pointer to the expiry value.
+ */
+ if (end_time && !to) {
+ expire = timespec_to_ktime(*end_time);
+ to = &expire;
}
- __timeout = schedule_timeout(__timeout);
- if (*timeout >= 0)
- *timeout += __timeout;
+
+ if (!schedule_hrtimeout_range(to, slack, HRTIMER_MODE_ABS))
+ timed_out = 1;
}
__set_current_state(TASK_RUNNING);
((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1)
int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
- fd_set __user *exp, s64 *timeout)
+ fd_set __user *exp, struct timespec *end_time)
{
fd_set_bits fds;
void *bits;
zero_fd_set(n, fds.res_out);
zero_fd_set(n, fds.res_ex);
- ret = do_select(n, &fds, timeout);
+ ret = do_select(n, &fds, end_time);
if (ret < 0)
goto out;
asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
fd_set __user *exp, struct timeval __user *tvp)
{
- s64 timeout = -1;
+ struct timespec end_time, *to = NULL;
struct timeval tv;
int ret;
if (copy_from_user(&tv, tvp, sizeof(tv)))
return -EFAULT;
- if (tv.tv_sec < 0 || tv.tv_usec < 0)
+ to = &end_time;
+ if (poll_select_set_timeout(to, tv.tv_sec,
+ tv.tv_usec * NSEC_PER_USEC))
return -EINVAL;
-
- /* Cast to u64 to make GCC stop complaining */
- if ((u64)tv.tv_sec >= (u64)MAX_INT64_SECONDS)
- timeout = -1; /* infinite */
- else {
- timeout = DIV_ROUND_UP(tv.tv_usec, USEC_PER_SEC/HZ);
- timeout += tv.tv_sec * HZ;
- }
}
- ret = core_sys_select(n, inp, outp, exp, &timeout);
-
- if (tvp) {
- struct timeval rtv;
-
- if (current->personality & STICKY_TIMEOUTS)
- goto sticky;
- rtv.tv_usec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ));
- rtv.tv_sec = timeout;
- if (timeval_compare(&rtv, &tv) >= 0)
- rtv = tv;
- if (copy_to_user(tvp, &rtv, sizeof(rtv))) {
-sticky:
- /*
- * If an application puts its timeval in read-only
- * memory, we don't want the Linux-specific update to
- * the timeval to cause a fault after the select has
- * completed successfully. However, because we're not
- * updating the timeval, we can't restart the system
- * call.
- */
- if (ret == -ERESTARTNOHAND)
- ret = -EINTR;
- }
- }
+ ret = core_sys_select(n, inp, outp, exp, to);
+ ret = poll_select_copy_remaining(&end_time, tvp, 1, ret);
return ret;
}
fd_set __user *exp, struct timespec __user *tsp,
const sigset_t __user *sigmask, size_t sigsetsize)
{
- s64 timeout = MAX_SCHEDULE_TIMEOUT;
sigset_t ksigmask, sigsaved;
- struct timespec ts;
+ struct timespec ts, end_time, *to = NULL;
int ret;
if (tsp) {
if (copy_from_user(&ts, tsp, sizeof(ts)))
return -EFAULT;
- if (ts.tv_sec < 0 || ts.tv_nsec < 0)
+ to = &end_time;
+ if (poll_select_set_timeout(to, ts.tv_sec, ts.tv_nsec))
return -EINVAL;
-
- /* Cast to u64 to make GCC stop complaining */
- if ((u64)ts.tv_sec >= (u64)MAX_INT64_SECONDS)
- timeout = -1; /* infinite */
- else {
- timeout = DIV_ROUND_UP(ts.tv_nsec, NSEC_PER_SEC/HZ);
- timeout += ts.tv_sec * HZ;
- }
}
if (sigmask) {
sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
}
- ret = core_sys_select(n, inp, outp, exp, &timeout);
-
- if (tsp) {
- struct timespec rts;
-
- if (current->personality & STICKY_TIMEOUTS)
- goto sticky;
- rts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) *
- 1000;
- rts.tv_sec = timeout;
- if (timespec_compare(&rts, &ts) >= 0)
- rts = ts;
- if (copy_to_user(tsp, &rts, sizeof(rts))) {
-sticky:
- /*
- * If an application puts its timeval in read-only
- * memory, we don't want the Linux-specific update to
- * the timeval to cause a fault after the select has
- * completed successfully. However, because we're not
- * updating the timeval, we can't restart the system
- * call.
- */
- if (ret == -ERESTARTNOHAND)
- ret = -EINTR;
- }
- }
+ ret = core_sys_select(n, inp, outp, exp, &end_time);
+ ret = poll_select_copy_remaining(&end_time, tsp, 0, ret);
if (ret == -ERESTARTNOHAND) {
/*
}
static int do_poll(unsigned int nfds, struct poll_list *list,
- struct poll_wqueues *wait, s64 *timeout)
+ struct poll_wqueues *wait, struct timespec *end_time)
{
- int count = 0;
poll_table* pt = &wait->pt;
+ ktime_t expire, *to = NULL;
+ int timed_out = 0, count = 0;
+ unsigned long slack = 0;
/* Optimise the no-wait case */
- if (!(*timeout))
+ if (end_time && !end_time->tv_sec && !end_time->tv_nsec) {
pt = NULL;
+ timed_out = 1;
+ }
+
+ if (end_time && !timed_out)
+ slack = estimate_accuracy(end_time);
for (;;) {
struct poll_list *walk;
- long __timeout;
set_current_state(TASK_INTERRUPTIBLE);
for (walk = list; walk != NULL; walk = walk->next) {
if (signal_pending(current))
count = -EINTR;
}
- if (count || !*timeout)
+ if (count || timed_out)
break;
- if (*timeout < 0) {
- /* Wait indefinitely */
- __timeout = MAX_SCHEDULE_TIMEOUT;
- } else if (unlikely(*timeout >= (s64)MAX_SCHEDULE_TIMEOUT-1)) {
- /*
- * Wait for longer than MAX_SCHEDULE_TIMEOUT. Do it in
- * a loop
- */
- __timeout = MAX_SCHEDULE_TIMEOUT - 1;
- *timeout -= __timeout;
- } else {
- __timeout = *timeout;
- *timeout = 0;
+ /*
+ * If this is the first loop and we have a timeout
+ * given, then we convert to ktime_t and set the to
+ * pointer to the expiry value.
+ */
+ if (end_time && !to) {
+ expire = timespec_to_ktime(*end_time);
+ to = &expire;
}
- __timeout = schedule_timeout(__timeout);
- if (*timeout >= 0)
- *timeout += __timeout;
+ if (!schedule_hrtimeout_range(to, slack, HRTIMER_MODE_ABS))
+ timed_out = 1;
}
__set_current_state(TASK_RUNNING);
return count;
#define N_STACK_PPS ((sizeof(stack_pps) - sizeof(struct poll_list)) / \
sizeof(struct pollfd))
-int do_sys_poll(struct pollfd __user *ufds, unsigned int nfds, s64 *timeout)
+int do_sys_poll(struct pollfd __user *ufds, unsigned int nfds,
+ struct timespec *end_time)
{
struct poll_wqueues table;
int err = -EFAULT, fdcount, len, size;
}
poll_initwait(&table);
- fdcount = do_poll(nfds, head, &table, timeout);
+ fdcount = do_poll(nfds, head, &table, end_time);
poll_freewait(&table);
for (walk = head; walk; walk = walk->next) {
static long do_restart_poll(struct restart_block *restart_block)
{
- struct pollfd __user *ufds = (struct pollfd __user*)restart_block->arg0;
- int nfds = restart_block->arg1;
- s64 timeout = ((s64)restart_block->arg3<<32) | (s64)restart_block->arg2;
+ struct pollfd __user *ufds = restart_block->poll.ufds;
+ int nfds = restart_block->poll.nfds;
+ struct timespec *to = NULL, end_time;
int ret;
- ret = do_sys_poll(ufds, nfds, &timeout);
+ if (restart_block->poll.has_timeout) {
+ end_time.tv_sec = restart_block->poll.tv_sec;
+ end_time.tv_nsec = restart_block->poll.tv_nsec;
+ to = &end_time;
+ }
+
+ ret = do_sys_poll(ufds, nfds, to);
+
if (ret == -EINTR) {
restart_block->fn = do_restart_poll;
- restart_block->arg2 = timeout & 0xFFFFFFFF;
- restart_block->arg3 = (u64)timeout >> 32;
ret = -ERESTART_RESTARTBLOCK;
}
return ret;
asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
long timeout_msecs)
{
- s64 timeout_jiffies;
+ struct timespec end_time, *to = NULL;
int ret;
- if (timeout_msecs > 0) {
-#if HZ > 1000
- /* We can only overflow if HZ > 1000 */
- if (timeout_msecs / 1000 > (s64)0x7fffffffffffffffULL / (s64)HZ)
- timeout_jiffies = -1;
- else
-#endif
- timeout_jiffies = msecs_to_jiffies(timeout_msecs) + 1;
- } else {
- /* Infinite (< 0) or no (0) timeout */
- timeout_jiffies = timeout_msecs;
+ if (timeout_msecs >= 0) {
+ to = &end_time;
+ poll_select_set_timeout(to, timeout_msecs / MSEC_PER_SEC,
+ NSEC_PER_MSEC * (timeout_msecs % MSEC_PER_SEC));
}
- ret = do_sys_poll(ufds, nfds, &timeout_jiffies);
+ ret = do_sys_poll(ufds, nfds, to);
+
if (ret == -EINTR) {
struct restart_block *restart_block;
+
restart_block = ¤t_thread_info()->restart_block;
restart_block->fn = do_restart_poll;
- restart_block->arg0 = (unsigned long)ufds;
- restart_block->arg1 = nfds;
- restart_block->arg2 = timeout_jiffies & 0xFFFFFFFF;
- restart_block->arg3 = (u64)timeout_jiffies >> 32;
+ restart_block->poll.ufds = ufds;
+ restart_block->poll.nfds = nfds;
+
+ if (timeout_msecs >= 0) {
+ restart_block->poll.tv_sec = end_time.tv_sec;
+ restart_block->poll.tv_nsec = end_time.tv_nsec;
+ restart_block->poll.has_timeout = 1;
+ } else
+ restart_block->poll.has_timeout = 0;
+
ret = -ERESTART_RESTARTBLOCK;
}
return ret;
size_t sigsetsize)
{
sigset_t ksigmask, sigsaved;
- struct timespec ts;
- s64 timeout = -1;
+ struct timespec ts, end_time, *to = NULL;
int ret;
if (tsp) {
if (copy_from_user(&ts, tsp, sizeof(ts)))
return -EFAULT;
- /* Cast to u64 to make GCC stop complaining */
- if ((u64)ts.tv_sec >= (u64)MAX_INT64_SECONDS)
- timeout = -1; /* infinite */
- else {
- timeout = DIV_ROUND_UP(ts.tv_nsec, NSEC_PER_SEC/HZ);
- timeout += ts.tv_sec * HZ;
- }
+ to = &end_time;
+ if (poll_select_set_timeout(to, ts.tv_sec, ts.tv_nsec))
+ return -EINVAL;
}
if (sigmask) {
sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
}
- ret = do_sys_poll(ufds, nfds, &timeout);
+ ret = do_sys_poll(ufds, nfds, to);
/* We can restart this syscall, usually */
if (ret == -EINTR) {
} else if (sigmask)
sigprocmask(SIG_SETMASK, &sigsaved, NULL);
- if (tsp && timeout >= 0) {
- struct timespec rts;
-
- if (current->personality & STICKY_TIMEOUTS)
- goto sticky;
- /* Yes, we know it's actually an s64, but it's also positive. */
- rts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) *
- 1000;
- rts.tv_sec = timeout;
- if (timespec_compare(&rts, &ts) >= 0)
- rts = ts;
- if (copy_to_user(tsp, &rts, sizeof(rts))) {
- sticky:
- /*
- * If an application puts its timeval in read-only
- * memory, we don't want the Linux-specific update to
- * the timeval to cause a fault after the select has
- * completed successfully. However, because we're not
- * updating the timeval, we can't restart the system
- * call.
- */
- if (ret == -ERESTARTNOHAND && timeout >= 0)
- ret = -EINTR;
- }
- }
+ ret = poll_select_copy_remaining(&end_time, tsp, 0, ret);
return ret;
}
static ktime_t timerfd_get_remaining(struct timerfd_ctx *ctx)
{
- ktime_t now, remaining;
-
- now = ctx->tmr.base->get_time();
- remaining = ktime_sub(ctx->tmr.expires, now);
+ ktime_t remaining;
+ remaining = hrtimer_expires_remaining(&ctx->tmr);
return remaining.tv64 < 0 ? ktime_set(0, 0): remaining;
}
ctx->ticks = 0;
ctx->tintv = timespec_to_ktime(ktmr->it_interval);
hrtimer_init(&ctx->tmr, ctx->clockid, htmode);
- ctx->tmr.expires = texp;
+ hrtimer_set_expires(&ctx->tmr, texp);
ctx->tmr.function = timerfd_tmrproc;
if (texp.tv64 != 0)
hrtimer_start(&ctx->tmr, texp, htmode);
#include <linux/init.h>
#include <linux/list.h>
#include <linux/wait.h>
+#include <linux/percpu.h>
+
struct hrtimer_clock_base;
struct hrtimer_cpu_base;
/**
* struct hrtimer - the basic hrtimer structure
* @node: red black tree node for time ordered insertion
- * @expires: the absolute expiry time in the hrtimers internal
+ * @_expires: the absolute expiry time in the hrtimers internal
* representation. The time is related to the clock on
- * which the timer is based.
+ * which the timer is based. Is setup by adding
+ * slack to the _softexpires value. For non range timers
+ * identical to _softexpires.
+ * @_softexpires: the absolute earliest expiry time of the hrtimer.
+ * The time which was given as expiry time when the timer
+ * was armed.
* @function: timer expiry callback function
* @base: pointer to the timer base (per cpu and per clock)
* @state: state information (See bit values above)
*/
struct hrtimer {
struct rb_node node;
- ktime_t expires;
+ ktime_t _expires;
+ ktime_t _softexpires;
enum hrtimer_restart (*function)(struct hrtimer *);
struct hrtimer_clock_base *base;
unsigned long state;
#endif
};
+static inline void hrtimer_set_expires(struct hrtimer *timer, ktime_t time)
+{
+ timer->_expires = time;
+ timer->_softexpires = time;
+}
+
+static inline void hrtimer_set_expires_range(struct hrtimer *timer, ktime_t time, ktime_t delta)
+{
+ timer->_softexpires = time;
+ timer->_expires = ktime_add_safe(time, delta);
+}
+
+static inline void hrtimer_set_expires_range_ns(struct hrtimer *timer, ktime_t time, unsigned long delta)
+{
+ timer->_softexpires = time;
+ timer->_expires = ktime_add_safe(time, ns_to_ktime(delta));
+}
+
+static inline void hrtimer_set_expires_tv64(struct hrtimer *timer, s64 tv64)
+{
+ timer->_expires.tv64 = tv64;
+ timer->_softexpires.tv64 = tv64;
+}
+
+static inline void hrtimer_add_expires(struct hrtimer *timer, ktime_t time)
+{
+ timer->_expires = ktime_add_safe(timer->_expires, time);
+ timer->_softexpires = ktime_add_safe(timer->_softexpires, time);
+}
+
+static inline void hrtimer_add_expires_ns(struct hrtimer *timer, unsigned long ns)
+{
+ timer->_expires = ktime_add_ns(timer->_expires, ns);
+ timer->_softexpires = ktime_add_ns(timer->_softexpires, ns);
+}
+
+static inline ktime_t hrtimer_get_expires(const struct hrtimer *timer)
+{
+ return timer->_expires;
+}
+
+static inline ktime_t hrtimer_get_softexpires(const struct hrtimer *timer)
+{
+ return timer->_softexpires;
+}
+
+static inline s64 hrtimer_get_expires_tv64(const struct hrtimer *timer)
+{
+ return timer->_expires.tv64;
+}
+static inline s64 hrtimer_get_softexpires_tv64(const struct hrtimer *timer)
+{
+ return timer->_softexpires.tv64;
+}
+
+static inline s64 hrtimer_get_expires_ns(const struct hrtimer *timer)
+{
+ return ktime_to_ns(timer->_expires);
+}
+
+static inline ktime_t hrtimer_expires_remaining(const struct hrtimer *timer)
+{
+ return ktime_sub(timer->_expires, timer->base->get_time());
+}
+
#ifdef CONFIG_HIGH_RES_TIMERS
struct clock_event_device;
return timer->base->cpu_base->hres_active;
}
+extern void hrtimer_peek_ahead_timers(void);
+
/*
* The resolution of the clocks. The resolution value is returned in
* the clock_getres() system call to give application programmers an
* is expired in the next softirq when the clock was advanced.
*/
static inline void clock_was_set(void) { }
+static inline void hrtimer_peek_ahead_timers(void) { }
static inline void hres_timers_resume(void) { }
extern ktime_t ktime_get(void);
extern ktime_t ktime_get_real(void);
+
+DECLARE_PER_CPU(struct tick_device, tick_cpu_device);
+
+
/* Exported timer functions: */
/* Initialize timers: */
/* Basic timer operations: */
extern int hrtimer_start(struct hrtimer *timer, ktime_t tim,
const enum hrtimer_mode mode);
+extern int hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
+ unsigned long range_ns, const enum hrtimer_mode mode);
extern int hrtimer_cancel(struct hrtimer *timer);
extern int hrtimer_try_to_cancel(struct hrtimer *timer);
+static inline int hrtimer_start_expires(struct hrtimer *timer,
+ enum hrtimer_mode mode)
+{
+ unsigned long delta;
+ ktime_t soft, hard;
+ soft = hrtimer_get_softexpires(timer);
+ hard = hrtimer_get_expires(timer);
+ delta = ktime_to_ns(ktime_sub(hard, soft));
+ return hrtimer_start_range_ns(timer, soft, delta, mode);
+}
+
static inline int hrtimer_restart(struct hrtimer *timer)
{
- return hrtimer_start(timer, timer->expires, HRTIMER_MODE_ABS);
+ return hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
}
/* Query timers: */
extern void hrtimer_init_sleeper(struct hrtimer_sleeper *sl,
struct task_struct *tsk);
+extern int schedule_hrtimeout_range(ktime_t *expires, unsigned long delta,
+ const enum hrtimer_mode mode);
+extern int schedule_hrtimeout(ktime_t *expires, const enum hrtimer_mode mode);
+
/* Soft interrupt function to run the hrtimer queues: */
extern void hrtimer_run_queues(void);
extern void hrtimer_run_pending(void);
.cpu_timers = INIT_CPU_TIMERS(tsk.cpu_timers), \
.fs_excl = ATOMIC_INIT(0), \
.pi_lock = __SPIN_LOCK_UNLOCKED(tsk.pi_lock), \
+ .timer_slack_ns = 50000, /* 50 usec default slack */ \
.pids = { \
[PIDTYPE_PID] = INIT_PID_LINK(PIDTYPE_PID), \
[PIDTYPE_PGID] = INIT_PID_LINK(PIDTYPE_PGID), \
#define MAX_INT64_SECONDS (((s64)(~((u64)0)>>1)/HZ)-1)
-extern int do_select(int n, fd_set_bits *fds, s64 *timeout);
+extern int do_select(int n, fd_set_bits *fds, struct timespec *end_time);
extern int do_sys_poll(struct pollfd __user * ufds, unsigned int nfds,
- s64 *timeout);
+ struct timespec *end_time);
extern int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
- fd_set __user *exp, s64 *timeout);
+ fd_set __user *exp, struct timespec *end_time);
+
+extern int poll_select_set_timeout(struct timespec *to, long sec, long nsec);
#endif /* KERNEL */
#define PR_GET_SECUREBITS 27
#define PR_SET_SECUREBITS 28
+/*
+ * Get/set the timerslack as used by poll/select/nanosleep
+ * A value of 0 means "use default"
+ */
+#define PR_SET_TIMERSLACK 29
+#define PR_GET_TIMERSLACK 30
+
#endif /* _LINUX_PRCTL_H */
int latency_record_count;
struct latency_record latency_record[LT_SAVECOUNT];
#endif
+ /*
+ * time slack values; these are used to round up poll() and
+ * select() etc timeout values. These are in nanoseconds.
+ */
+ unsigned long timer_slack_ns;
+ unsigned long default_timer_slack_ns;
};
/*
#endif
u64 expires;
} nanosleep;
+ /* For poll */
+ struct {
+ struct pollfd __user *ufds;
+ int nfds;
+ int has_timeout;
+ unsigned long tv_sec;
+ unsigned long tv_nsec;
+ } poll;
};
};
#define NSEC_PER_SEC 1000000000L
#define FSEC_PER_SEC 1000000000000000L
+#define TIME_T_MAX (time_t)((1UL << ((sizeof(time_t) << 3) - 1)) - 1)
+
static inline int timespec_equal(const struct timespec *a,
const struct timespec *b)
{
const unsigned int min, const unsigned int sec);
extern void set_normalized_timespec(struct timespec *ts, time_t sec, long nsec);
+extern struct timespec timespec_add_safe(const struct timespec lhs,
+ const struct timespec rhs);
/*
* sub = lhs - rhs, in normalized form
p->prev_utime = cputime_zero;
p->prev_stime = cputime_zero;
+ p->default_timer_slack_ns = current->timer_slack_ns;
+
#ifdef CONFIG_DETECT_SOFTLOCKUP
p->last_switch_count = 0;
p->last_switch_timestamp = 0;
if (!abs_time)
schedule();
else {
+ unsigned long slack;
+ slack = current->timer_slack_ns;
+ if (rt_task(current))
+ slack = 0;
hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC,
HRTIMER_MODE_ABS);
hrtimer_init_sleeper(&t, current);
- t.timer.expires = *abs_time;
+ hrtimer_set_expires_range_ns(&t.timer, *abs_time, slack);
- hrtimer_start(&t.timer, t.timer.expires,
- HRTIMER_MODE_ABS);
+ hrtimer_start_expires(&t.timer, HRTIMER_MODE_ABS);
if (!hrtimer_active(&t.timer))
t.task = NULL;
hrtimer_init_on_stack(&to->timer, CLOCK_REALTIME,
HRTIMER_MODE_ABS);
hrtimer_init_sleeper(to, current);
- to->timer.expires = *time;
+ hrtimer_set_expires(&to->timer, *time);
}
q.pi_state = NULL;
if (!base->first)
continue;
timer = rb_entry(base->first, struct hrtimer, node);
- expires = ktime_sub(timer->expires, base->offset);
+ expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
if (expires.tv64 < cpu_base->expires_next.tv64)
cpu_base->expires_next = expires;
}
struct hrtimer_clock_base *base)
{
ktime_t *expires_next = &__get_cpu_var(hrtimer_bases).expires_next;
- ktime_t expires = ktime_sub(timer->expires, base->offset);
+ ktime_t expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
int res;
- WARN_ON_ONCE(timer->expires.tv64 < 0);
+ WARN_ON_ONCE(hrtimer_get_expires_tv64(timer) < 0);
/*
* When the callback is running, we do not reprogram the clock event
u64 orun = 1;
ktime_t delta;
- delta = ktime_sub(now, timer->expires);
+ delta = ktime_sub(now, hrtimer_get_expires(timer));
if (delta.tv64 < 0)
return 0;
s64 incr = ktime_to_ns(interval);
orun = ktime_divns(delta, incr);
- timer->expires = ktime_add_ns(timer->expires, incr * orun);
- if (timer->expires.tv64 > now.tv64)
+ hrtimer_add_expires_ns(timer, incr * orun);
+ if (hrtimer_get_expires_tv64(timer) > now.tv64)
return orun;
/*
* This (and the ktime_add() below) is the
*/
orun++;
}
- timer->expires = ktime_add_safe(timer->expires, interval);
+ hrtimer_add_expires(timer, interval);
return orun;
}
* We dont care about collisions. Nodes with
* the same expiry time stay together.
*/
- if (timer->expires.tv64 < entry->expires.tv64) {
+ if (hrtimer_get_expires_tv64(timer) <
+ hrtimer_get_expires_tv64(entry)) {
link = &(*link)->rb_left;
} else {
link = &(*link)->rb_right;
}
/**
- * hrtimer_start - (re)start an relative timer on the current CPU
+ * hrtimer_start_range_ns - (re)start an hrtimer on the current CPU
* @timer: the timer to be added
* @tim: expiry time
+ * @delta_ns: "slack" range for the timer
* @mode: expiry mode: absolute (HRTIMER_ABS) or relative (HRTIMER_REL)
*
* Returns:
* 1 when the timer was active
*/
int
-hrtimer_start(struct hrtimer *timer, ktime_t tim, const enum hrtimer_mode mode)
+hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, unsigned long delta_ns,
+ const enum hrtimer_mode mode)
{
struct hrtimer_clock_base *base, *new_base;
unsigned long flags;
#endif
}
- timer->expires = tim;
+ hrtimer_set_expires_range_ns(timer, tim, delta_ns);
timer_stats_hrtimer_set_start_info(timer);
return ret;
}
+EXPORT_SYMBOL_GPL(hrtimer_start_range_ns);
+
+/**
+ * hrtimer_start - (re)start an hrtimer on the current CPU
+ * @timer: the timer to be added
+ * @tim: expiry time
+ * @mode: expiry mode: absolute (HRTIMER_ABS) or relative (HRTIMER_REL)
+ *
+ * Returns:
+ * 0 on success
+ * 1 when the timer was active
+ */
+int
+hrtimer_start(struct hrtimer *timer, ktime_t tim, const enum hrtimer_mode mode)
+{
+ return hrtimer_start_range_ns(timer, tim, 0, mode);
+}
EXPORT_SYMBOL_GPL(hrtimer_start);
+
/**
* hrtimer_try_to_cancel - try to deactivate a timer
* @timer: hrtimer to stop
ktime_t rem;
base = lock_hrtimer_base(timer, &flags);
- rem = ktime_sub(timer->expires, base->get_time());
+ rem = hrtimer_expires_remaining(timer);
unlock_hrtimer_base(timer, &flags);
return rem;
continue;
timer = rb_entry(base->first, struct hrtimer, node);
- delta.tv64 = timer->expires.tv64;
+ delta.tv64 = hrtimer_get_expires_tv64(timer);
delta = ktime_sub(delta, base->get_time());
if (delta.tv64 < mindelta.tv64)
mindelta.tv64 = delta.tv64;
timer = rb_entry(node, struct hrtimer, node);
- if (basenow.tv64 < timer->expires.tv64) {
+ /*
+ * The immediate goal for using the softexpires is
+ * minimizing wakeups, not running timers at the
+ * earliest interrupt after their soft expiration.
+ * This allows us to avoid using a Priority Search
+ * Tree, which can answer a stabbing querry for
+ * overlapping intervals and instead use the simple
+ * BST we already have.
+ * We don't add extra wakeups by delaying timers that
+ * are right-of a not yet expired timer, because that
+ * timer will have to trigger a wakeup anyway.
+ */
+
+ if (basenow.tv64 < hrtimer_get_softexpires_tv64(timer)) {
ktime_t expires;
- expires = ktime_sub(timer->expires,
+ expires = ktime_sub(hrtimer_get_expires(timer),
base->offset);
if (expires.tv64 < expires_next.tv64)
expires_next = expires;
raise_softirq(HRTIMER_SOFTIRQ);
}
+/**
+ * hrtimer_peek_ahead_timers -- run soft-expired timers now
+ *
+ * hrtimer_peek_ahead_timers will peek at the timer queue of
+ * the current cpu and check if there are any timers for which
+ * the soft expires time has passed. If any such timers exist,
+ * they are run immediately and then removed from the timer queue.
+ *
+ */
+void hrtimer_peek_ahead_timers(void)
+{
+ struct tick_device *td;
+ unsigned long flags;
+
+ if (!hrtimer_hres_active())
+ return;
+
+ local_irq_save(flags);
+ td = &__get_cpu_var(tick_cpu_device);
+ if (td && td->evtdev)
+ hrtimer_interrupt(td->evtdev);
+ local_irq_restore(flags);
+}
+
static void run_hrtimer_softirq(struct softirq_action *h)
{
run_hrtimer_pending(&__get_cpu_var(hrtimer_bases));
struct hrtimer *timer;
timer = rb_entry(node, struct hrtimer, node);
- if (base->softirq_time.tv64 <= timer->expires.tv64)
+ if (base->softirq_time.tv64 <=
+ hrtimer_get_expires_tv64(timer))
break;
if (timer->cb_mode == HRTIMER_CB_SOFTIRQ) {
do {
set_current_state(TASK_INTERRUPTIBLE);
- hrtimer_start(&t->timer, t->timer.expires, mode);
+ hrtimer_start_expires(&t->timer, mode);
if (!hrtimer_active(&t->timer))
t->task = NULL;
struct timespec rmt;
ktime_t rem;
- rem = ktime_sub(timer->expires, timer->base->get_time());
+ rem = hrtimer_expires_remaining(timer);
if (rem.tv64 <= 0)
return 0;
rmt = ktime_to_timespec(rem);
hrtimer_init_on_stack(&t.timer, restart->nanosleep.index,
HRTIMER_MODE_ABS);
- t.timer.expires.tv64 = restart->nanosleep.expires;
+ hrtimer_set_expires_tv64(&t.timer, restart->nanosleep.expires);
if (do_nanosleep(&t, HRTIMER_MODE_ABS))
goto out;
struct restart_block *restart;
struct hrtimer_sleeper t;
int ret = 0;
+ unsigned long slack;
+
+ slack = current->timer_slack_ns;
+ if (rt_task(current))
+ slack = 0;
hrtimer_init_on_stack(&t.timer, clockid, mode);
- t.timer.expires = timespec_to_ktime(*rqtp);
+ hrtimer_set_expires_range_ns(&t.timer, timespec_to_ktime(*rqtp), slack);
if (do_nanosleep(&t, mode))
goto out;
restart->fn = hrtimer_nanosleep_restart;
restart->nanosleep.index = t.timer.base->index;
restart->nanosleep.rmtp = rmtp;
- restart->nanosleep.expires = t.timer.expires.tv64;
+ restart->nanosleep.expires = hrtimer_get_expires_tv64(&t.timer);
ret = -ERESTART_RESTARTBLOCK;
out:
#endif
}
+/**
+ * schedule_hrtimeout_range - sleep until timeout
+ * @expires: timeout value (ktime_t)
+ * @delta: slack in expires timeout (ktime_t)
+ * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
+ *
+ * Make the current task sleep until the given expiry time has
+ * elapsed. The routine will return immediately unless
+ * the current task state has been set (see set_current_state()).
+ *
+ * The @delta argument gives the kernel the freedom to schedule the
+ * actual wakeup to a time that is both power and performance friendly.
+ * The kernel give the normal best effort behavior for "@expires+@delta",
+ * but may decide to fire the timer earlier, but no earlier than @expires.
+ *
+ * You can set the task state as follows -
+ *
+ * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
+ * pass before the routine returns.
+ *
+ * %TASK_INTERRUPTIBLE - the routine may return early if a signal is
+ * delivered to the current task.
+ *
+ * The current task state is guaranteed to be TASK_RUNNING when this
+ * routine returns.
+ *
+ * Returns 0 when the timer has expired otherwise -EINTR
+ */
+int __sched schedule_hrtimeout_range(ktime_t *expires, unsigned long delta,
+ const enum hrtimer_mode mode)
+{
+ struct hrtimer_sleeper t;
+
+ /*
+ * Optimize when a zero timeout value is given. It does not
+ * matter whether this is an absolute or a relative time.
+ */
+ if (expires && !expires->tv64) {
+ __set_current_state(TASK_RUNNING);
+ return 0;
+ }
+
+ /*
+ * A NULL parameter means "inifinte"
+ */
+ if (!expires) {
+ schedule();
+ __set_current_state(TASK_RUNNING);
+ return -EINTR;
+ }
+
+ hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC, mode);
+ hrtimer_set_expires_range_ns(&t.timer, *expires, delta);
+
+ hrtimer_init_sleeper(&t, current);
+
+ hrtimer_start_expires(&t.timer, mode);
+ if (!hrtimer_active(&t.timer))
+ t.task = NULL;
+
+ if (likely(t.task))
+ schedule();
+
+ hrtimer_cancel(&t.timer);
+ destroy_hrtimer_on_stack(&t.timer);
+
+ __set_current_state(TASK_RUNNING);
+
+ return !t.task ? 0 : -EINTR;
+}
+EXPORT_SYMBOL_GPL(schedule_hrtimeout_range);
+
+/**
+ * schedule_hrtimeout - sleep until timeout
+ * @expires: timeout value (ktime_t)
+ * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
+ *
+ * Make the current task sleep until the given expiry time has
+ * elapsed. The routine will return immediately unless
+ * the current task state has been set (see set_current_state()).
+ *
+ * You can set the task state as follows -
+ *
+ * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
+ * pass before the routine returns.
+ *
+ * %TASK_INTERRUPTIBLE - the routine may return early if a signal is
+ * delivered to the current task.
+ *
+ * The current task state is guaranteed to be TASK_RUNNING when this
+ * routine returns.
+ *
+ * Returns 0 when the timer has expired otherwise -EINTR
+ */
+int __sched schedule_hrtimeout(ktime_t *expires,
+ const enum hrtimer_mode mode)
+{
+ return schedule_hrtimeout_range(expires, 0, mode);
+}
+EXPORT_SYMBOL_GPL(schedule_hrtimeout);
(timr->it_sigev_notify & ~SIGEV_THREAD_ID) == SIGEV_NONE))
timr->it_overrun += (unsigned int) hrtimer_forward(timer, now, iv);
- remaining = ktime_sub(timer->expires, now);
+ remaining = ktime_sub(hrtimer_get_expires(timer), now);
/* Return 0 only, when the timer is expired and not pending */
if (remaining.tv64 <= 0) {
/*
hrtimer_init(&timr->it.real.timer, timr->it_clock, mode);
timr->it.real.timer.function = posix_timer_fn;
- timer->expires = timespec_to_ktime(new_setting->it_value);
+ hrtimer_set_expires(timer, timespec_to_ktime(new_setting->it_value));
/* Convert interval */
timr->it.real.interval = timespec_to_ktime(new_setting->it_interval);
if (((timr->it_sigev_notify & ~SIGEV_THREAD_ID) == SIGEV_NONE)) {
/* Setup correct expiry time for relative timers */
if (mode == HRTIMER_MODE_REL) {
- timer->expires =
- ktime_add_safe(timer->expires,
- timer->base->get_time());
+ hrtimer_add_expires(timer, timer->base->get_time());
}
return 0;
}
- hrtimer_start(timer, timer->expires, mode);
+ hrtimer_start_expires(timer, mode);
return 0;
}
/* Setup the timer, when timeout != NULL */
if (unlikely(timeout)) {
- hrtimer_start(&timeout->timer, timeout->timer.expires,
- HRTIMER_MODE_ABS);
+ hrtimer_start_expires(&timeout->timer, HRTIMER_MODE_ABS);
if (!hrtimer_active(&timeout->timer))
timeout->task = NULL;
}
now = hrtimer_cb_get_time(&rt_b->rt_period_timer);
hrtimer_forward(&rt_b->rt_period_timer, now, rt_b->rt_period);
- hrtimer_start(&rt_b->rt_period_timer,
- rt_b->rt_period_timer.expires,
- HRTIMER_MODE_ABS);
+ hrtimer_start_expires(&rt_b->rt_period_timer,
+ HRTIMER_MODE_ABS);
}
spin_unlock(&rt_b->rt_runtime_lock);
}
struct hrtimer *timer = &rq->hrtick_timer;
ktime_t time = ktime_add_ns(timer->base->get_time(), delay);
- timer->expires = time;
+ hrtimer_set_expires(timer, time);
if (rq == this_rq()) {
hrtimer_restart(timer);
case PR_SET_TSC:
error = SET_TSC_CTL(arg2);
break;
+ case PR_GET_TIMERSLACK:
+ error = current->timer_slack_ns;
+ break;
+ case PR_SET_TIMERSLACK:
+ if (arg2 <= 0)
+ current->timer_slack_ns =
+ current->default_timer_slack_ns;
+ else
+ current->timer_slack_ns = arg2;
+ break;
default:
error = -EINVAL;
break;
#endif
EXPORT_SYMBOL(jiffies);
+
+/*
+ * Add two timespec values and do a safety check for overflow.
+ * It's assumed that both values are valid (>= 0)
+ */
+struct timespec timespec_add_safe(const struct timespec lhs,
+ const struct timespec rhs)
+{
+ struct timespec res;
+
+ set_normalized_timespec(&res, lhs.tv_sec + rhs.tv_sec,
+ lhs.tv_nsec + rhs.tv_nsec);
+
+ if (res.tv_sec < lhs.tv_sec || res.tv_sec < rhs.tv_sec)
+ res.tv_sec = TIME_T_MAX;
+
+ return res;
+}
time_state = TIME_OOP;
printk(KERN_NOTICE "Clock: "
"inserting leap second 23:59:60 UTC\n");
- leap_timer.expires = ktime_add_ns(leap_timer.expires,
- NSEC_PER_SEC);
+ hrtimer_add_expires_ns(&leap_timer, NSEC_PER_SEC);
res = HRTIMER_RESTART;
break;
case TIME_DEL:
goto out;
}
- ts->idle_tick = ts->sched_timer.expires;
+ ts->idle_tick = hrtimer_get_expires(&ts->sched_timer);
ts->tick_stopped = 1;
ts->idle_jiffies = last_jiffies;
rcu_enter_nohz();
static void tick_nohz_restart(struct tick_sched *ts, ktime_t now)
{
hrtimer_cancel(&ts->sched_timer);
- ts->sched_timer.expires = ts->idle_tick;
+ hrtimer_set_expires(&ts->sched_timer, ts->idle_tick);
while (1) {
/* Forward the time to expire in the future */
hrtimer_forward(&ts->sched_timer, now, tick_period);
if (ts->nohz_mode == NOHZ_MODE_HIGHRES) {
- hrtimer_start(&ts->sched_timer,
- ts->sched_timer.expires,
+ hrtimer_start_expires(&ts->sched_timer,
HRTIMER_MODE_ABS);
/* Check, if the timer was already in the past */
if (hrtimer_active(&ts->sched_timer))
break;
} else {
- if (!tick_program_event(ts->sched_timer.expires, 0))
+ if (!tick_program_event(
+ hrtimer_get_expires(&ts->sched_timer), 0))
break;
}
/* Update jiffies and reread time */
*/
ts->tick_stopped = 0;
ts->idle_exittime = now;
+
tick_nohz_restart(ts, now);
+
local_irq_enable();
}
static int tick_nohz_reprogram(struct tick_sched *ts, ktime_t now)
{
hrtimer_forward(&ts->sched_timer, now, tick_period);
- return tick_program_event(ts->sched_timer.expires, 0);
+ return tick_program_event(hrtimer_get_expires(&ts->sched_timer), 0);
}
/*
next = tick_init_jiffy_update();
for (;;) {
- ts->sched_timer.expires = next;
+ hrtimer_set_expires(&ts->sched_timer, next);
if (!tick_program_event(next, 0))
break;
next = ktime_add(next, tick_period);
* already reached or less/equal than the tick period.
*/
now = ktime_get();
- delta = ktime_sub(ts->sched_timer.expires, now);
+ delta = ktime_sub(hrtimer_get_expires(&ts->sched_timer), now);
if (delta.tv64 <= tick_period.tv64)
return;
ts->sched_timer.cb_mode = HRTIMER_CB_IRQSAFE_PERCPU;
/* Get the next period (per cpu) */
- ts->sched_timer.expires = tick_init_jiffy_update();
+ hrtimer_set_expires(&ts->sched_timer, tick_init_jiffy_update());
offset = ktime_to_ns(tick_period) >> 1;
do_div(offset, num_possible_cpus());
offset *= smp_processor_id();
- ts->sched_timer.expires = ktime_add_ns(ts->sched_timer.expires, offset);
+ hrtimer_add_expires_ns(&ts->sched_timer, offset);
for (;;) {
hrtimer_forward(&ts->sched_timer, now, tick_period);
- hrtimer_start(&ts->sched_timer, ts->sched_timer.expires,
- HRTIMER_MODE_ABS);
+ hrtimer_start_expires(&ts->sched_timer, HRTIMER_MODE_ABS);
/* Check, if the timer was already in the past */
if (hrtimer_active(&ts->sched_timer))
break;
SEQ_printf(m, ", %s/%d", tmp, timer->start_pid);
#endif
SEQ_printf(m, "\n");
- SEQ_printf(m, " # expires at %Lu nsecs [in %Ld nsecs]\n",
- (unsigned long long)ktime_to_ns(timer->expires),
- (long long)(ktime_to_ns(timer->expires) - now));
+ SEQ_printf(m, " # expires at %Lu-%Lu nsecs [in %Ld to %Ld nsecs]\n",
+ (unsigned long long)ktime_to_ns(hrtimer_get_softexpires(timer)),
+ (unsigned long long)ktime_to_ns(hrtimer_get_expires(timer)),
+ (long long)(ktime_to_ns(hrtimer_get_softexpires(timer)) - now),
+ (long long)(ktime_to_ns(hrtimer_get_expires(timer)) - now));
}
static void
expires = ktime_set(0, 0);
expires = ktime_add_ns(expires, PSCHED_US2NS(sched));
if (hrtimer_try_to_cancel(&q->delay_timer) &&
- ktime_to_ns(ktime_sub(q->delay_timer.expires,
- expires)) > 0)
- q->delay_timer.expires = expires;
+ ktime_to_ns(ktime_sub(
+ hrtimer_get_expires(&q->delay_timer),
+ expires)) > 0)
+ hrtimer_set_expires(&q->delay_timer, expires);
hrtimer_restart(&q->delay_timer);
cl->delayed = 1;
cl->xstats.overactions++;
chip->thalf = 0;
if (!atomic_read(&chip->timer_active))
return HRTIMER_NORESTART;
- hrtimer_forward(&chip->timer, chip->timer.expires,
+ hrtimer_forward(&chip->timer, hrtimer_get_expires(&chip->timer),
ktime_set(0, chip->ns_rem));
return HRTIMER_RESTART;
}
chip->ns_rem = PCSP_PERIOD_NS();
ns = (chip->thalf ? PCSP_CALC_NS(timer_cnt) : chip->ns_rem);
chip->ns_rem -= ns;
- hrtimer_forward(&chip->timer, chip->timer.expires, ktime_set(0, ns));
+ hrtimer_forward(&chip->timer, hrtimer_get_expires(&chip->timer),
+ ktime_set(0, ns));
return HRTIMER_RESTART;
exit_nr_unlock2:
projects / linux-2.6-omap-h63xx.git / commitdiff