-/* TWL4030 GPIO module interrupt mask registers */
-static const u8 __initconst twl4030_gpio_imr_regs[] = {
- REG_GPIO_IMR1A,
- REG_GPIO_IMR1B,
- REG_GPIO_IMR2A,
- REG_GPIO_IMR2B,
- REG_GPIO_IMR3A,
- REG_GPIO_IMR3B,
-};
-
-/* TWL4030 GPIO module interrupt status registers */
-static const u8 __initconst twl4030_gpio_isr_regs[] = {
- REG_GPIO_ISR1A,
- REG_GPIO_ISR1B,
- REG_GPIO_ISR2A,
- REG_GPIO_ISR2B,
- REG_GPIO_ISR3A,
- REG_GPIO_ISR3B,
-};
-
-/* TWL4030 modules that have IMR/ISR registers that must be masked/cleared */
-static const struct twl4030_mod_iregs __initconst twl4030_mod_regs[] = {
- {
- .mod_no = TWL4030_MODULE_INT,
- .sih_ctrl = TWL4030_INT_PWR_SIH_CTRL,
- .reg_cnt = ARRAY_SIZE(twl4030_int_imr_regs),
- .imrs = twl4030_int_imr_regs,
- .isrs = twl4030_int_isr_regs,
+#define SIH_INITIALIZER(modname, nbits) \
+ .module = TWL4030_MODULE_ ## modname, \
+ .control_offset = TWL4030_ ## modname ## _SIH_CTRL, \
+ .bits = nbits, \
+ .bytes_ixr = DIV_ROUND_UP(nbits, 8), \
+ .edr_offset = TWL4030_ ## modname ## _EDR, \
+ .bytes_edr = DIV_ROUND_UP((2*(nbits)), 8), \
+ .mask = { { \
+ .isr_offset = TWL4030_ ## modname ## _ISR1, \
+ .imr_offset = TWL4030_ ## modname ## _IMR1, \
+ }, \
+ { \
+ .isr_offset = TWL4030_ ## modname ## _ISR2, \
+ .imr_offset = TWL4030_ ## modname ## _IMR2, \
+ }, },
+
+/* register naming policies are inconsistent ... */
+#define TWL4030_INT_PWR_EDR TWL4030_INT_PWR_EDR1
+#define TWL4030_MODULE_KEYPAD_KEYP TWL4030_MODULE_KEYPAD
+#define TWL4030_MODULE_INT_PWR TWL4030_MODULE_INT
+
+
+/* Order in this table matches order in PIH_ISR. That is,
+ * BIT(n) in PIH_ISR is sih_modules[n].
+ */
+static const struct sih sih_modules[6] = {
+ [0] = {
+ .name = "gpio",
+ .module = TWL4030_MODULE_GPIO,
+ .control_offset = REG_GPIO_SIH_CTRL,
+ .set_cor = true,
+ .bits = TWL4030_GPIO_MAX,
+ .bytes_ixr = 3,
+ /* Note: *all* of these IRQs default to no-trigger */
+ .edr_offset = REG_GPIO_EDR1,
+ .bytes_edr = 5,
+ .mask = { {
+ .isr_offset = REG_GPIO_ISR1A,
+ .imr_offset = REG_GPIO_IMR1A,
+ }, {
+ .isr_offset = REG_GPIO_ISR1B,
+ .imr_offset = REG_GPIO_IMR1B,
+ }, },