]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
omap2_nand updates
authorDavid Brownell <dbrownell@users.sourceforge.net>
Sun, 31 Aug 2008 21:19:05 +0000 (14:19 -0700)
committerTony Lindgren <tony@atomide.com>
Tue, 9 Sep 2008 01:01:59 +0000 (18:01 -0700)
Minor updates to the OMAP{2,3} NAND driver:

 - Rename those buffer PIO routines as *_buf16()
 - Get rid of pointless LE16 data conversions; OMAP is always LE
 - Speed up buffer reads by switching to __raw_readsl()

Right now this driver only handles 16-bit NAND, but eventually it
should handle 8-bit too.  Moreover it may be worth using DMA...

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
drivers/mtd/nand/omap2.c

index a33944c9d5fa0a36715f2ef582de47a6650c3ae3..2ede11683d42087a942c4a95125c1a110411dbc1 100644 (file)
@@ -187,39 +187,35 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 }
 
 /*
- * omap_read_buf - read data from NAND controller into buffer
+ * omap_read_buf16 - read data from NAND controller into buffer
  * @mtd: MTD device structure
  * @buf: buffer to store date
  * @len: number of bytes to read
  */
-static void omap_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+static void omap_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
 {
-       struct omap_nand_info *info = container_of(mtd,
-                                       struct omap_nand_info, mtd);
-       u16 *p = (u16 *) buf;
+       struct nand_chip *nand = mtd->priv;
 
-       len >>= 1;
-
-       while (len--)
-               *p++ = cpu_to_le16(readw(info->nand.IO_ADDR_R));
+       __raw_readsl(nand->IO_ADDR_R, buf, len / 2);
 }
 
 /*
- * omap_write_buf - write buffer to NAND controller
+ * omap_write_buf16 - write buffer to NAND controller
  * @mtd: MTD device structure
  * @buf: data buffer
  * @len: number of bytes to write
  */
-static void omap_write_buf(struct mtd_info *mtd, const u_char * buf, int len)
+static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
 {
        struct omap_nand_info *info = container_of(mtd,
                                                struct omap_nand_info, mtd);
        u16 *p = (u16 *) buf;
 
+       /* FIXME try bursts of writesw() or DMA ... */
        len >>= 1;
 
        while (len--) {
-               writew(cpu_to_le16(*p++), info->nand.IO_ADDR_W);
+               writew(*p++, info->nand.IO_ADDR_W);
 
                while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr +
                                                GPMC_STATUS) & GPMC_BUF_FULL));
@@ -643,8 +639,10 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
        info->nand.IO_ADDR_W = info->nand.IO_ADDR_R;
        info->nand.cmd_ctrl  = omap_hwcontrol;
 
-       info->nand.read_buf   = omap_read_buf;
-       info->nand.write_buf  = omap_write_buf;
+       /* REVISIT:  only supports 16-bit NAND flash */
+
+       info->nand.read_buf   = omap_read_buf16;
+       info->nand.write_buf  = omap_write_buf16;
        info->nand.verify_buf = omap_verify_buf;
 
        /*