*
* SuperH-specific DMA management API
*
- * Copyright (C) 2003, 2004 Paul Mundt
+ * Copyright (C) 2003, 2004, 2005 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
#include <linux/spinlock.h>
#include <linux/proc_fs.h>
#include <linux/list.h>
+#include <linux/platform_device.h>
#include <asm/dma.h>
DEFINE_SPINLOCK(dma_spin_lock);
struct dma_info *get_dma_info(unsigned int chan)
{
- struct list_head *pos, *tmp;
+ struct dma_info *info;
unsigned int total = 0;
/*
* Look for each DMAC's range to determine who the owner of
* the channel is.
*/
- list_for_each_safe(pos, tmp, ®istered_dmac_list) {
- struct dma_info *info = list_entry(pos, struct dma_info, list);
-
+ list_for_each_entry(info, ®istered_dmac_list, list) {
total += info->nr_channels;
if (chan > total)
continue;
return NULL;
}
+static unsigned int get_nr_channels(void)
+{
+ struct dma_info *info;
+ unsigned int nr = 0;
+
+ if (unlikely(list_empty(®istered_dmac_list)))
+ return nr;
+
+ list_for_each_entry(info, ®istered_dmac_list, list)
+ nr += info->nr_channels;
+
+ return nr;
+}
+
struct dma_channel *get_dma_channel(unsigned int chan)
{
struct dma_info *info = get_dma_info(chan);
static int dma_read_proc(char *buf, char **start, off_t off,
int len, int *eof, void *data)
{
- struct list_head *pos, *tmp;
+ struct dma_info *info;
char *p = buf;
if (list_empty(®istered_dmac_list))
/*
* Iterate over each registered DMAC
*/
- list_for_each_safe(pos, tmp, ®istered_dmac_list) {
- struct dma_info *info = list_entry(pos, struct dma_info, list);
+ list_for_each_entry(info, ®istered_dmac_list, list) {
int i;
/*
#endif
-int __init register_dmac(struct dma_info *info)
+int register_dmac(struct dma_info *info)
{
- int i;
+ unsigned int total_channels, i;
INIT_LIST_HEAD(&info->list);
BUG_ON((info->flags & DMAC_CHANNELS_CONFIGURED) && !info->channels);
+ info->pdev = platform_device_register_simple((char *)info->name, -1,
+ NULL, 0);
+ if (IS_ERR(info->pdev))
+ return PTR_ERR(info->pdev);
+
/*
* Don't touch pre-configured channels
*/
memset(info->channels, 0, size);
}
+ total_channels = get_nr_channels();
for (i = 0; i < info->nr_channels; i++) {
struct dma_channel *chan = info->channels + i;
chan->chan = i;
+ chan->vchan = i + total_channels;
memcpy(chan->dev_id, "Unused", 7);
init_MUTEX(&chan->sem);
init_waitqueue_head(&chan->wait_queue);
-#ifdef CONFIG_SYSFS
- dma_create_sysfs_files(chan);
-#endif
+ dma_create_sysfs_files(chan, info);
}
list_add(&info->list, ®istered_dmac_list);
return 0;
}
-void __exit unregister_dmac(struct dma_info *info)
+void unregister_dmac(struct dma_info *info)
{
+ unsigned int i;
+
+ for (i = 0; i < info->nr_channels; i++)
+ dma_remove_sysfs_files(info->channels + i, info);
+
if (!(info->flags & DMAC_CHANNELS_CONFIGURED))
kfree(info->channels);
list_del(&info->list);
+ platform_device_unregister(info->pdev);
}
static int __init dma_api_init(void)
};
static struct dma_info g2_dma_info = {
- .name = "G2 DMA",
+ .name = "g2_dmac",
.nr_channels = 4,
.ops = &g2_dma_ops,
.flags = DMAC_CHANNELS_TEI_CAPABLE,
static void __exit g2_dma_exit(void)
{
free_irq(HW_EVENT_G2_DMA, 0);
+ unregister_dmac(&g2_dma_info);
}
subsys_initcall(g2_dma_init);
* such, this code is meant for only the simplest of tasks (and shouldn't be
* used in any new drivers at all).
*
- * It should also be noted that various functions here are labelled as
- * being deprecated. This is due to the fact that the ops->xfer() method is
- * the preferred way of doing things (as well as just grabbing the spinlock
- * directly). As such, any users of this interface will be warned rather
- * loudly.
+ * NOTE: ops->xfer() is the preferred way of doing things. However, there
+ * are some users of the ISA DMA API that exist in common code that we
+ * don't necessarily want to go out of our way to break, so we still
+ * allow for some compatability at that level. Any new code is strongly
+ * advised to run far away from the ISA DMA API and use the SH DMA API
+ * directly.
*/
-
-unsigned long __deprecated claim_dma_lock(void)
+unsigned long claim_dma_lock(void)
{
unsigned long flags;
}
EXPORT_SYMBOL(claim_dma_lock);
-void __deprecated release_dma_lock(unsigned long flags)
+void release_dma_lock(unsigned long flags)
{
spin_unlock_irqrestore(&dma_spin_lock, flags);
}
EXPORT_SYMBOL(release_dma_lock);
-void __deprecated disable_dma(unsigned int chan)
+void disable_dma(unsigned int chan)
{
/* Nothing */
}
EXPORT_SYMBOL(disable_dma);
-void __deprecated enable_dma(unsigned int chan)
+void enable_dma(unsigned int chan)
{
struct dma_info *info = get_dma_info(chan);
struct dma_channel *channel = &info->channels[chan];
};
static struct dma_info pvr2_dma_info = {
- .name = "PowerVR 2 DMA",
+ .name = "pvr2_dmac",
.nr_channels = 1,
.ops = &pvr2_dma_ops,
.flags = DMAC_CHANNELS_TEI_CAPABLE,
{
free_dma(PVR2_CASCADE_CHAN);
free_irq(HW_EVENT_PVR2_DMA, 0);
+ unregister_dmac(&pvr2_dma_info);
}
subsys_initcall(pvr2_dma_init);
*
* Copyright (C) 2000 Takashi YOSHII
* Copyright (C) 2003, 2004 Paul Mundt
+ * Copyright (C) 2005 Andriy Skulysh
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <asm/dreamcast/dma.h>
#include <asm/signal.h>
#include <asm/irq.h>
#include <asm/dma.h>
#include <asm/io.h>
#include "dma-sh.h"
-/*
- * The SuperH DMAC supports a number of transmit sizes, we list them here,
- * with their respective values as they appear in the CHCR registers.
- *
- * Defaults to a 64-bit transfer size.
- */
-enum {
- XMIT_SZ_64BIT,
- XMIT_SZ_8BIT,
- XMIT_SZ_16BIT,
- XMIT_SZ_32BIT,
- XMIT_SZ_256BIT,
-};
-
-/*
- * The DMA count is defined as the number of bytes to transfer.
- */
-static unsigned int ts_shift[] = {
- [XMIT_SZ_64BIT] = 3,
- [XMIT_SZ_8BIT] = 0,
- [XMIT_SZ_16BIT] = 1,
- [XMIT_SZ_32BIT] = 2,
- [XMIT_SZ_256BIT] = 5,
-};
-
static inline unsigned int get_dmte_irq(unsigned int chan)
{
- unsigned int irq;
+ unsigned int irq = 0;
/*
* Normally we could just do DMTE0_IRQ + chan outright, though in the
* case of the 7751R, the DMTE IRQs for channels > 4 start right above
* the SCIF
*/
-
if (chan < 4) {
irq = DMTE0_IRQ + chan;
} else {
+#ifdef DMTE4_IRQ
irq = DMTE4_IRQ + chan - 4;
+#endif
}
return irq;
{
u32 chcr = ctrl_inl(CHCR[chan->chan]);
- chcr >>= 4;
-
- return ts_shift[chcr & 0x0007];
+ return ts_shift[(chcr & CHCR_TS_MASK)>>CHCR_TS_SHIFT];
}
/*
static int sh_dmac_request_dma(struct dma_channel *chan)
{
+ char name[32];
+
+ snprintf(name, sizeof(name), "DMAC Transfer End (Channel %d)",
+ chan->chan);
+
return request_irq(get_dmte_irq(chan->chan), dma_tei,
- SA_INTERRUPT, "DMAC Transfer End", chan);
+ SA_INTERRUPT, name, chan);
}
static void sh_dmac_free_dma(struct dma_channel *chan)
free_irq(get_dmte_irq(chan->chan), chan);
}
-static void sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
+static void
+sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
{
if (!chcr)
- chcr = RS_DUAL;
+ chcr = RS_DUAL | CHCR_IE;
+
+ if (chcr & CHCR_IE) {
+ chcr &= ~CHCR_IE;
+ chan->flags |= DMA_TEI_CAPABLE;
+ } else {
+ chan->flags &= ~DMA_TEI_CAPABLE;
+ }
ctrl_outl(chcr, CHCR[chan->chan]);
static void sh_dmac_enable_dma(struct dma_channel *chan)
{
- int irq = get_dmte_irq(chan->chan);
+ int irq;
u32 chcr;
chcr = ctrl_inl(CHCR[chan->chan]);
- chcr |= CHCR_DE | CHCR_IE;
+ chcr |= CHCR_DE;
+
+ if (chan->flags & DMA_TEI_CAPABLE)
+ chcr |= CHCR_IE;
+
ctrl_outl(chcr, CHCR[chan->chan]);
- enable_irq(irq);
+ if (chan->flags & DMA_TEI_CAPABLE) {
+ irq = get_dmte_irq(chan->chan);
+ enable_irq(irq);
+ }
}
static void sh_dmac_disable_dma(struct dma_channel *chan)
{
- int irq = get_dmte_irq(chan->chan);
+ int irq;
u32 chcr;
- disable_irq(irq);
+ if (chan->flags & DMA_TEI_CAPABLE) {
+ irq = get_dmte_irq(chan->chan);
+ disable_irq(irq);
+ }
chcr = ctrl_inl(CHCR[chan->chan]);
chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE);
* If we haven't pre-configured the channel with special flags, use
* the defaults.
*/
- if (!(chan->flags & DMA_CONFIGURED))
+ if (unlikely(!(chan->flags & DMA_CONFIGURED)))
sh_dmac_configure_channel(chan, 0);
sh_dmac_disable_dma(chan);
* cascading to the PVR2 DMAC. In this case, we still need to write
* SAR and DAR, regardless of value, in order for cascading to work.
*/
- if (chan->sar || (mach_is_dreamcast() && chan->chan == 2))
+ if (chan->sar || (mach_is_dreamcast() &&
+ chan->chan == PVR2_CASCADE_CHAN))
ctrl_outl(chan->sar, SAR[chan->chan]);
- if (chan->dar || (mach_is_dreamcast() && chan->chan == 2))
+ if (chan->dar || (mach_is_dreamcast() &&
+ chan->chan == PVR2_CASCADE_CHAN))
ctrl_outl(chan->dar, DAR[chan->chan]);
ctrl_outl(chan->count >> calc_xmit_shift(chan), DMATCR[chan->chan]);
return ctrl_inl(DMATCR[chan->chan]) << calc_xmit_shift(chan);
}
-#if defined(CONFIG_CPU_SH4)
-static irqreturn_t dma_err(int irq, void *dev_id, struct pt_regs *regs)
+#ifdef CONFIG_CPU_SUBTYPE_SH7780
+#define dmaor_read_reg() ctrl_inw(DMAOR)
+#define dmaor_write_reg(data) ctrl_outw(data, DMAOR)
+#else
+#define dmaor_read_reg() ctrl_inl(DMAOR)
+#define dmaor_write_reg(data) ctrl_outl(data, DMAOR)
+#endif
+
+static inline int dmaor_reset(void)
{
- unsigned long dmaor = ctrl_inl(DMAOR);
+ unsigned long dmaor = dmaor_read_reg();
+
+ /* Try to clear the error flags first, incase they are set */
+ dmaor &= ~(DMAOR_NMIF | DMAOR_AE);
+ dmaor_write_reg(dmaor);
- printk("DMAE: DMAOR=%lx\n", dmaor);
+ dmaor |= DMAOR_INIT;
+ dmaor_write_reg(dmaor);
- ctrl_outl(ctrl_inl(DMAOR)&~DMAOR_NMIF, DMAOR);
- ctrl_outl(ctrl_inl(DMAOR)&~DMAOR_AE, DMAOR);
- ctrl_outl(ctrl_inl(DMAOR)|DMAOR_DME, DMAOR);
+ /* See if we got an error again */
+ if ((dmaor_read_reg() & (DMAOR_AE | DMAOR_NMIF))) {
+ printk(KERN_ERR "dma-sh: Can't initialize DMAOR.\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+#if defined(CONFIG_CPU_SH4)
+static irqreturn_t dma_err(int irq, void *dev_id, struct pt_regs *regs)
+{
+ dmaor_reset();
disable_irq(irq);
return IRQ_HANDLED;
};
static struct dma_info sh_dmac_info = {
- .name = "SuperH DMAC",
- .nr_channels = 4,
+ .name = "sh_dmac",
+ .nr_channels = CONFIG_NR_ONCHIP_DMA_CHANNELS,
.ops = &sh_dmac_ops,
.flags = DMAC_CHANNELS_TEI_CAPABLE,
};
make_ipr_irq(irq, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
}
- ctrl_outl(0x8000 | DMAOR_DME, DMAOR);
+ /*
+ * Initialize DMAOR, and clean up any error flags that may have
+ * been set.
+ */
+ i = dmaor_reset();
+ if (i < 0)
+ return i;
return register_dmac(info);
}
#ifdef CONFIG_CPU_SH4
free_irq(DMAE_IRQ, 0);
#endif
+ unregister_dmac(&sh_dmac_info);
}
subsys_initcall(sh_dmac_init);
module_exit(sh_dmac_exit);
+MODULE_AUTHOR("Takashi YOSHII, Paul Mundt, Andriy Skulysh");
+MODULE_DESCRIPTION("SuperH On-Chip DMAC Support");
MODULE_LICENSE("GPL");
-
#ifndef __DMA_SH_H
#define __DMA_SH_H
+#include <asm/cpu/dma.h>
+
/* Definitions for the SuperH DMAC */
#define REQ_L 0x00000000
#define REQ_E 0x00080000
#define SM_DEC 0x00002000
#define RS_IN 0x00000200
#define RS_OUT 0x00000300
-#define TM_BURST 0x0000080
-#define TS_8 0x00000010
-#define TS_16 0x00000020
-#define TS_32 0x00000030
-#define TS_64 0x00000000
#define TS_BLK 0x00000040
#define CHCR_DE 0x00000001
#define CHCR_TE 0x00000002
#define CHCR_IE 0x00000004
-/* Define the default configuration for dual address memory-memory transfer.
- * The 0x400 value represents auto-request, external->external.
- */
-#define RS_DUAL (DM_INC | SM_INC | 0x400 | TS_32)
-
-#define DMAOR_COD 0x00000008
+/* DMAOR definitions */
#define DMAOR_AE 0x00000004
#define DMAOR_NMIF 0x00000002
#define DMAOR_DME 0x00000001
+/*
+ * Define the default configuration for dual address memory-memory transfer.
+ * The 0x400 value represents auto-request, external->external.
+ */
+#define RS_DUAL (DM_INC | SM_INC | 0x400 | TS_32)
+
#define MAX_DMAC_CHANNELS (CONFIG_NR_ONCHIP_DMA_CHANNELS)
+/*
+ * Subtypes that have fewer channels than this simply need to change
+ * CONFIG_NR_ONCHIP_DMA_CHANNELS. Likewise, subtypes with a larger number
+ * of channels should expand on this.
+ *
+ * For most subtypes we can easily figure these values out with some
+ * basic calculation, unfortunately on other subtypes these are more
+ * scattered, so we just leave it unrolled for simplicity.
+ */
+#define SAR ((unsigned long[]){SH_DMAC_BASE + 0x00, SH_DMAC_BASE + 0x10, \
+ SH_DMAC_BASE + 0x20, SH_DMAC_BASE + 0x30, \
+ SH_DMAC_BASE + 0x50, SH_DMAC_BASE + 0x60})
+#define DAR ((unsigned long[]){SH_DMAC_BASE + 0x04, SH_DMAC_BASE + 0x14, \
+ SH_DMAC_BASE + 0x24, SH_DMAC_BASE + 0x34, \
+ SH_DMAC_BASE + 0x54, SH_DMAC_BASE + 0x64})
+#define DMATCR ((unsigned long[]){SH_DMAC_BASE + 0x08, SH_DMAC_BASE + 0x18, \
+ SH_DMAC_BASE + 0x28, SH_DMAC_BASE + 0x38, \
+ SH_DMAC_BASE + 0x58, SH_DMAC_BASE + 0x68})
+#define CHCR ((unsigned long[]){SH_DMAC_BASE + 0x0c, SH_DMAC_BASE + 0x1c, \
+ SH_DMAC_BASE + 0x2c, SH_DMAC_BASE + 0x3c, \
+ SH_DMAC_BASE + 0x5c, SH_DMAC_BASE + 0x6c})
+
+#define DMAOR (SH_DMAC_BASE + 0x40)
+
#endif /* __DMA_SH_H */
*
* sysfs interface for SH DMA API
*
- * Copyright (C) 2004 Paul Mundt
+ * Copyright (C) 2004, 2005 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sysdev.h>
+#include <linux/platform_device.h>
#include <linux/module.h>
+#include <linux/err.h>
#include <linux/string.h>
#include <asm/dma.h>
unsigned long config;
config = simple_strtoul(buf, NULL, 0);
- dma_configure_channel(channel->chan, config);
+ dma_configure_channel(channel->vchan, config);
return count;
}
dma_ro_attr(count, "0x%08x\n");
dma_ro_attr(flags, "0x%08lx\n");
-int __init dma_create_sysfs_files(struct dma_channel *chan)
+int dma_create_sysfs_files(struct dma_channel *chan, struct dma_info *info)
{
struct sys_device *dev = &chan->dev;
+ char name[16];
int ret;
- dev->id = chan->chan;
+ dev->id = chan->vchan;
dev->cls = &dma_sysclass;
ret = sysdev_register(dev);
sysdev_create_file(dev, &attr_flags);
sysdev_create_file(dev, &attr_config);
- return 0;
+ snprintf(name, sizeof(name), "dma%d", chan->chan);
+ return sysfs_create_link(&info->pdev->dev.kobj, &dev->kobj, name);
+}
+
+void dma_remove_sysfs_files(struct dma_channel *chan, struct dma_info *info)
+{
+ struct sys_device *dev = &chan->dev;
+ char name[16];
+
+ sysdev_remove_file(dev, &attr_dev_id);
+ sysdev_remove_file(dev, &attr_count);
+ sysdev_remove_file(dev, &attr_mode);
+ sysdev_remove_file(dev, &attr_flags);
+ sysdev_remove_file(dev, &attr_config);
+
+ snprintf(name, sizeof(name), "dma%d", chan->chan);
+ sysfs_remove_link(&info->pdev->dev.kobj, name);
+
+ sysdev_unregister(dev);
}
/* This is needed for USB OHCI to work */
if (dev->dma_mask)
dev->dev.dma_mask = dev->dma_mask;
+ if (dev->coherent_dma_mask)
+ dev->dev.coherent_dma_mask = dev->coherent_dma_mask;
snprintf(dev->dev.bus_id, BUS_ID_SIZE, "%s%u",
dev->name, dev->dev_id);
void *mapbase;
unsigned int irq[6];
u64 *dma_mask;
+ u64 coherent_dma_mask;
};
#define to_sh_dev(d) container_of((d), struct sh_dev, dev)
#define SH_DMAC_BASE 0xa4000020
-#endif /* __ASM_CPU_SH3_DMA_H */
+/* Definitions for the SuperH DMAC */
+#define TM_BURST 0x00000020
+#define TS_8 0x00000000
+#define TS_16 0x00000008
+#define TS_32 0x00000010
+#define TS_128 0x00000018
+
+#define CHCR_TS_MASK 0x18
+#define CHCR_TS_SHIFT 3
+
+#define DMAOR_INIT DMAOR_DME
+/*
+ * The SuperH DMAC supports a number of transmit sizes, we list them here,
+ * with their respective values as they appear in the CHCR registers.
+ */
+enum {
+ XMIT_SZ_8BIT,
+ XMIT_SZ_16BIT,
+ XMIT_SZ_32BIT,
+ XMIT_SZ_128BIT,
+};
+
+static unsigned int ts_shift[] __attribute__ ((used)) = {
+ [XMIT_SZ_8BIT] = 0,
+ [XMIT_SZ_16BIT] = 1,
+ [XMIT_SZ_32BIT] = 2,
+ [XMIT_SZ_128BIT] = 4,
+};
+
+#endif /* __ASM_CPU_SH3_DMA_H */
#ifndef __ASM_CPU_SH4_DMA_H
#define __ASM_CPU_SH4_DMA_H
+#ifdef CONFIG_CPU_SH4A
+#define SH_DMAC_BASE 0xfc808020
+#else
#define SH_DMAC_BASE 0xffa00000
+#endif
-#define SAR ((unsigned long[]){SH_DMAC_BASE + 0x00, SH_DMAC_BASE + 0x10, \
- SH_DMAC_BASE + 0x20, SH_DMAC_BASE + 0x30})
-#define DAR ((unsigned long[]){SH_DMAC_BASE + 0x04, SH_DMAC_BASE + 0x14, \
- SH_DMAC_BASE + 0x24, SH_DMAC_BASE + 0x34})
-#define DMATCR ((unsigned long[]){SH_DMAC_BASE + 0x08, SH_DMAC_BASE + 0x18, \
- SH_DMAC_BASE + 0x28, SH_DMAC_BASE + 0x38})
-#define CHCR ((unsigned long[]){SH_DMAC_BASE + 0x0c, SH_DMAC_BASE + 0x1c, \
- SH_DMAC_BASE + 0x2c, SH_DMAC_BASE + 0x3c})
-#define DMAOR (SH_DMAC_BASE + 0x40)
+/* Definitions for the SuperH DMAC */
+#define TM_BURST 0x0000080
+#define TS_8 0x00000010
+#define TS_16 0x00000020
+#define TS_32 0x00000030
+#define TS_64 0x00000000
-#endif /* __ASM_CPU_SH4_DMA_H */
+#define CHCR_TS_MASK 0x30
+#define CHCR_TS_SHIFT 4
+
+#define DMAOR_COD 0x00000008
+
+#define DMAOR_INIT ( 0x8000 | DMAOR_DME )
+/*
+ * The SuperH DMAC supports a number of transmit sizes, we list them here,
+ * with their respective values as they appear in the CHCR registers.
+ *
+ * Defaults to a 64-bit transfer size.
+ */
+enum {
+ XMIT_SZ_64BIT,
+ XMIT_SZ_8BIT,
+ XMIT_SZ_16BIT,
+ XMIT_SZ_32BIT,
+ XMIT_SZ_256BIT,
+};
+
+/*
+ * The DMA count is defined as the number of bytes to transfer.
+ */
+static unsigned int ts_shift[] __attribute__ ((used)) = {
+ [XMIT_SZ_64BIT] = 3,
+ [XMIT_SZ_8BIT] = 0,
+ [XMIT_SZ_16BIT] = 1,
+ [XMIT_SZ_32BIT] = 2,
+ [XMIT_SZ_256BIT] = 5,
+};
+
+#endif /* __ASM_CPU_SH4_DMA_H */
#include <linux/config.h>
#include <linux/mm.h>
#include <asm/scatterlist.h>
+#include <asm/cacheflush.h>
#include <asm/io.h>
extern struct bus_type pci_bus_type;
}
}
-static inline void dma_sync_single_for_cpu(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction dir)
+static void dma_sync_single_for_cpu(struct device *dev,
+ dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction dir)
__attribute__ ((alias("dma_sync_single")));
-static inline void dma_sync_single_for_device(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction dir)
+static void dma_sync_single_for_device(struct device *dev,
+ dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction dir)
__attribute__ ((alias("dma_sync_single")));
-static inline void dma_sync_sg_for_cpu(struct device *dev,
- struct scatterlist *sg, int nelems,
- enum dma_data_direction dir)
+static void dma_sync_sg_for_cpu(struct device *dev,
+ struct scatterlist *sg, int nelems,
+ enum dma_data_direction dir)
__attribute__ ((alias("dma_sync_sg")));
-static inline void dma_sync_sg_for_device(struct device *dev,
- struct scatterlist *sg, int nelems,
- enum dma_data_direction dir)
+static void dma_sync_sg_for_device(struct device *dev,
+ struct scatterlist *sg, int nelems,
+ enum dma_data_direction dir)
__attribute__ ((alias("dma_sync_sg")));
static inline int dma_get_cache_alignment(void)
#include <linux/spinlock.h>
#include <linux/wait.h>
#include <linux/sysdev.h>
+#include <linux/device.h>
#include <asm/cpu/dma.h>
#include <asm/semaphore.h>
* DMA channel capabilities / flags
*/
enum {
- DMA_CONFIGURED = 0x00,
DMA_TEI_CAPABLE = 0x01,
+ DMA_CONFIGURED = 0x02,
};
extern spinlock_t dma_spin_lock;
struct dma_channel {
char dev_id[16];
- unsigned int chan;
+ unsigned int chan; /* Physical channel number */
+ unsigned int vchan; /* Virtual channel number */
unsigned int mode;
unsigned int count;
};
struct dma_info {
+ struct platform_device *pdev;
+
const char *name;
unsigned int nr_channels;
unsigned long flags;
#ifdef CONFIG_SYSFS
/* arch/sh/drivers/dma/dma-sysfs.c */
-extern int dma_create_sysfs_files(struct dma_channel *);
+extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *);
+extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *);
+#else
+#define dma_create_sysfs_file(channel, info) do { } while (0)
+#define dma_remove_sysfs_file(channel, info) do { } while (0)
#endif
#ifdef CONFIG_PCI
projects / linux-2.6-omap-h63xx.git / commitdiff