]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
USB: change interface to usb_lock_device_for_reset()
authorAlan Stern <stern@rowland.harvard.edu>
Tue, 4 Nov 2008 16:29:27 +0000 (11:29 -0500)
committerGreg Kroah-Hartman <gregkh@suse.de>
Wed, 7 Jan 2009 17:59:52 +0000 (09:59 -0800)
This patch (as1161) changes the interface to
usb_lock_device_for_reset().  The existing interface is apparently not
very clear, judging from the fact that several of its callers don't
use it correctly.  The new interface always returns 0 for success and
it always requires the caller to unlock the device afterward.

The new routine will not return immediately if it is called while the
driver's probe method is running.  Instead it will wait until the
probe is over and the device has been unlocked.  This shouldn't cause
any problems; I don't know of any cases where drivers call
usb_lock_device_for_reset() during probe.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/block/ub.c
drivers/hid/usbhid/hid-core.c
drivers/media/video/pvrusb2/pvrusb2-hdw.c
drivers/usb/core/usb.c
drivers/usb/image/microtek.c
drivers/usb/storage/transport.c

index 048d71d244d7335d3e719e916632ef1a71079465..12fb816db7b0eaead4f086f229089338b6ca5745 100644 (file)
@@ -1579,7 +1579,7 @@ static void ub_reset_task(struct work_struct *work)
        struct ub_dev *sc = container_of(work, struct ub_dev, reset_work);
        unsigned long flags;
        struct ub_lun *lun;
-       int lkr, rc;
+       int rc;
 
        if (!sc->reset) {
                printk(KERN_WARNING "%s: Running reset unrequested\n",
@@ -1597,10 +1597,11 @@ static void ub_reset_task(struct work_struct *work)
        } else if (sc->dev->actconfig->desc.bNumInterfaces != 1) {
                ;
        } else {
-               if ((lkr = usb_lock_device_for_reset(sc->dev, sc->intf)) < 0) {
+               rc = usb_lock_device_for_reset(sc->dev, sc->intf);
+               if (rc < 0) {
                        printk(KERN_NOTICE
                            "%s: usb_lock_device_for_reset failed (%d)\n",
-                           sc->name, lkr);
+                           sc->name, rc);
                } else {
                        rc = usb_reset_device(sc->dev);
                        if (rc < 0) {
@@ -1608,9 +1609,7 @@ static void ub_reset_task(struct work_struct *work)
                                    "usb_lock_device_for_reset failed (%d)\n",
                                    sc->name, rc);
                        }
-
-                       if (lkr)
-                               usb_unlock_device(sc->dev);
+                       usb_unlock_device(sc->dev);
                }
        }
 
index 03cb494af1c55e3531fe169e99bc7a9daa5e9ccd..f0a0f72238aba24c66c8ecaab0ca917064609add 100644 (file)
@@ -102,7 +102,7 @@ static void hid_reset(struct work_struct *work)
        struct usbhid_device *usbhid =
                container_of(work, struct usbhid_device, reset_work);
        struct hid_device *hid = usbhid->hid;
-       int rc_lock, rc = 0;
+       int rc = 0;
 
        if (test_bit(HID_CLEAR_HALT, &usbhid->iofl)) {
                dev_dbg(&usbhid->intf->dev, "clear halt\n");
@@ -113,11 +113,10 @@ static void hid_reset(struct work_struct *work)
 
        else if (test_bit(HID_RESET_PENDING, &usbhid->iofl)) {
                dev_dbg(&usbhid->intf->dev, "resetting device\n");
-               rc = rc_lock = usb_lock_device_for_reset(hid_to_usb_dev(hid), usbhid->intf);
-               if (rc_lock >= 0) {
+               rc = usb_lock_device_for_reset(hid_to_usb_dev(hid), usbhid->intf);
+               if (rc == 0) {
                        rc = usb_reset_device(hid_to_usb_dev(hid));
-                       if (rc_lock)
-                               usb_unlock_device(hid_to_usb_dev(hid));
+                       usb_unlock_device(hid_to_usb_dev(hid));
                }
                clear_bit(HID_RESET_PENDING, &usbhid->iofl);
        }
index 8fb92ac78c7b9ab4cd217a79efe6f60ca2c03085..fa304e5f252a65df9f289af4ece6da1b1b071d28 100644 (file)
@@ -3655,7 +3655,7 @@ void pvr2_hdw_device_reset(struct pvr2_hdw *hdw)
        int ret;
        pvr2_trace(PVR2_TRACE_INIT,"Performing a device reset...");
        ret = usb_lock_device_for_reset(hdw->usb_dev,NULL);
-       if (ret == 1) {
+       if (ret == 0) {
                ret = usb_reset_device(hdw->usb_dev);
                usb_unlock_device(hdw->usb_dev);
        } else {
index 399e15fc505244056d0f276f3f378525ff95c8e1..400fa4cc9a34cc4e9cf92aa0c38478b280d81075 100644 (file)
@@ -513,10 +513,7 @@ EXPORT_SYMBOL_GPL(usb_put_intf);
  * disconnect; in some drivers (such as usb-storage) the disconnect()
  * or suspend() method will block waiting for a device reset to complete.
  *
- * Returns a negative error code for failure, otherwise 1 or 0 to indicate
- * that the device will or will not have to be unlocked.  (0 can be
- * returned when an interface is given and is BINDING, because in that
- * case the driver already owns the device lock.)
+ * Returns a negative error code for failure, otherwise 0.
  */
 int usb_lock_device_for_reset(struct usb_device *udev,
                              const struct usb_interface *iface)
@@ -527,16 +524,9 @@ int usb_lock_device_for_reset(struct usb_device *udev,
                return -ENODEV;
        if (udev->state == USB_STATE_SUSPENDED)
                return -EHOSTUNREACH;
-       if (iface) {
-               switch (iface->condition) {
-               case USB_INTERFACE_BINDING:
-                       return 0;
-               case USB_INTERFACE_BOUND:
-                       break;
-               default:
-                       return -EINTR;
-               }
-       }
+       if (iface && (iface->condition == USB_INTERFACE_UNBINDING ||
+                       iface->condition == USB_INTERFACE_UNBOUND))
+               return -EINTR;
 
        while (usb_trylock_device(udev) != 0) {
 
@@ -550,10 +540,11 @@ int usb_lock_device_for_reset(struct usb_device *udev,
                        return -ENODEV;
                if (udev->state == USB_STATE_SUSPENDED)
                        return -EHOSTUNREACH;
-               if (iface && iface->condition != USB_INTERFACE_BOUND)
+               if (iface && (iface->condition == USB_INTERFACE_UNBINDING ||
+                               iface->condition == USB_INTERFACE_UNBOUND))
                        return -EINTR;
        }
-       return 1;
+       return 0;
 }
 EXPORT_SYMBOL_GPL(usb_lock_device_for_reset);
 
index 885867a86de81b6948b1e7671e059903047b535e..4541dfcea88fa8d294e8c05ba1eccbbaff5bb34b 100644 (file)
@@ -350,17 +350,16 @@ static int mts_scsi_abort(struct scsi_cmnd *srb)
 static int mts_scsi_host_reset(struct scsi_cmnd *srb)
 {
        struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
-       int result, rc;
+       int result;
 
        MTS_DEBUG_GOT_HERE();
        mts_debug_dump(desc);
 
-       rc = usb_lock_device_for_reset(desc->usb_dev, desc->usb_intf);
-       if (rc < 0)
-               return FAILED;
-       result = usb_reset_device(desc->usb_dev);
-       if (rc)
+       result = usb_lock_device_for_reset(desc->usb_dev, desc->usb_intf);
+       if (result == 0) {
+               result = usb_reset_device(desc->usb_dev);
                usb_unlock_device(desc->usb_dev);
+       }
        return result ? FAILED : SUCCESS;
 }
 
index 79108d5d3171a62c520aed391d8cca3029e510b6..2058db41618ce8bee2971e19161785da38ad9b9b 100644 (file)
@@ -1173,10 +1173,9 @@ int usb_stor_Bulk_reset(struct us_data *us)
  */
 int usb_stor_port_reset(struct us_data *us)
 {
-       int result, rc_lock;
+       int result;
 
-       result = rc_lock =
-               usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf);
+       result = usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf);
        if (result < 0)
                US_DEBUGP("unable to lock device for reset: %d\n", result);
        else {
@@ -1189,8 +1188,7 @@ int usb_stor_port_reset(struct us_data *us)
                        US_DEBUGP("usb_reset_device returns %d\n",
                                        result);
                }
-               if (rc_lock)
-                       usb_unlock_device(us->pusb_dev);
+               usb_unlock_device(us->pusb_dev);
        }
        return result;
 }