]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/blob - include/linux/interrupt.h
genirq: Expose default irq affinity mask (take 3)
[linux-2.6-omap-h63xx.git] / include / linux / interrupt.h
1 /* interrupt.h */
2 #ifndef _LINUX_INTERRUPT_H
3 #define _LINUX_INTERRUPT_H
4
5 #include <linux/kernel.h>
6 #include <linux/linkage.h>
7 #include <linux/bitops.h>
8 #include <linux/preempt.h>
9 #include <linux/cpumask.h>
10 #include <linux/irqreturn.h>
11 #include <linux/hardirq.h>
12 #include <linux/sched.h>
13 #include <linux/irqflags.h>
14 #include <asm/atomic.h>
15 #include <asm/ptrace.h>
16 #include <asm/system.h>
17
18 /*
19  * These correspond to the IORESOURCE_IRQ_* defines in
20  * linux/ioport.h to select the interrupt line behaviour.  When
21  * requesting an interrupt without specifying a IRQF_TRIGGER, the
22  * setting should be assumed to be "as already configured", which
23  * may be as per machine or firmware initialisation.
24  */
25 #define IRQF_TRIGGER_NONE       0x00000000
26 #define IRQF_TRIGGER_RISING     0x00000001
27 #define IRQF_TRIGGER_FALLING    0x00000002
28 #define IRQF_TRIGGER_HIGH       0x00000004
29 #define IRQF_TRIGGER_LOW        0x00000008
30 #define IRQF_TRIGGER_MASK       (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \
31                                  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
32 #define IRQF_TRIGGER_PROBE      0x00000010
33
34 /*
35  * These flags used only by the kernel as part of the
36  * irq handling routines.
37  *
38  * IRQF_DISABLED - keep irqs disabled when calling the action handler
39  * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator
40  * IRQF_SHARED - allow sharing the irq among several devices
41  * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
42  * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
43  * IRQF_PERCPU - Interrupt is per cpu
44  * IRQF_NOBALANCING - Flag to exclude this interrupt from irq balancing
45  * IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is
46  *                registered first in an shared interrupt is considered for
47  *                performance reasons)
48  */
49 #define IRQF_DISABLED           0x00000020
50 #define IRQF_SAMPLE_RANDOM      0x00000040
51 #define IRQF_SHARED             0x00000080
52 #define IRQF_PROBE_SHARED       0x00000100
53 #define IRQF_TIMER              0x00000200
54 #define IRQF_PERCPU             0x00000400
55 #define IRQF_NOBALANCING        0x00000800
56 #define IRQF_IRQPOLL            0x00001000
57
58 typedef irqreturn_t (*irq_handler_t)(int, void *);
59
60 struct irqaction {
61         irq_handler_t handler;
62         unsigned long flags;
63         cpumask_t mask;
64         const char *name;
65         void *dev_id;
66         struct irqaction *next;
67         int irq;
68         struct proc_dir_entry *dir;
69 };
70
71 extern irqreturn_t no_action(int cpl, void *dev_id);
72 extern int __must_check request_irq(unsigned int, irq_handler_t handler,
73                        unsigned long, const char *, void *);
74 extern void free_irq(unsigned int, void *);
75
76 struct device;
77
78 extern int __must_check devm_request_irq(struct device *dev, unsigned int irq,
79                             irq_handler_t handler, unsigned long irqflags,
80                             const char *devname, void *dev_id);
81 extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id);
82
83 /*
84  * On lockdep we dont want to enable hardirqs in hardirq
85  * context. Use local_irq_enable_in_hardirq() to annotate
86  * kernel code that has to do this nevertheless (pretty much
87  * the only valid case is for old/broken hardware that is
88  * insanely slow).
89  *
90  * NOTE: in theory this might break fragile code that relies
91  * on hardirq delivery - in practice we dont seem to have such
92  * places left. So the only effect should be slightly increased
93  * irqs-off latencies.
94  */
95 #ifdef CONFIG_LOCKDEP
96 # define local_irq_enable_in_hardirq()  do { } while (0)
97 #else
98 # define local_irq_enable_in_hardirq()  local_irq_enable()
99 #endif
100
101 extern void disable_irq_nosync(unsigned int irq);
102 extern void disable_irq(unsigned int irq);
103 extern void enable_irq(unsigned int irq);
104
105 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
106
107 extern cpumask_t irq_default_affinity;
108
109 extern int irq_set_affinity(unsigned int irq, cpumask_t cpumask);
110 extern int irq_can_set_affinity(unsigned int irq);
111 extern int irq_select_affinity(unsigned int irq);
112
113 #else /* CONFIG_SMP */
114
115 static inline int irq_set_affinity(unsigned int irq, cpumask_t cpumask)
116 {
117         return -EINVAL;
118 }
119
120 static inline int irq_can_set_affinity(unsigned int irq)
121 {
122         return 0;
123 }
124
125 static inline int irq_select_affinity(unsigned int irq)  { return 0; }
126
127 #endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */
128
129 #ifdef CONFIG_GENERIC_HARDIRQS
130 /*
131  * Special lockdep variants of irq disabling/enabling.
132  * These should be used for locking constructs that
133  * know that a particular irq context which is disabled,
134  * and which is the only irq-context user of a lock,
135  * that it's safe to take the lock in the irq-disabled
136  * section without disabling hardirqs.
137  *
138  * On !CONFIG_LOCKDEP they are equivalent to the normal
139  * irq disable/enable methods.
140  */
141 static inline void disable_irq_nosync_lockdep(unsigned int irq)
142 {
143         disable_irq_nosync(irq);
144 #ifdef CONFIG_LOCKDEP
145         local_irq_disable();
146 #endif
147 }
148
149 static inline void disable_irq_nosync_lockdep_irqsave(unsigned int irq, unsigned long *flags)
150 {
151         disable_irq_nosync(irq);
152 #ifdef CONFIG_LOCKDEP
153         local_irq_save(*flags);
154 #endif
155 }
156
157 static inline void disable_irq_lockdep(unsigned int irq)
158 {
159         disable_irq(irq);
160 #ifdef CONFIG_LOCKDEP
161         local_irq_disable();
162 #endif
163 }
164
165 static inline void enable_irq_lockdep(unsigned int irq)
166 {
167 #ifdef CONFIG_LOCKDEP
168         local_irq_enable();
169 #endif
170         enable_irq(irq);
171 }
172
173 static inline void enable_irq_lockdep_irqrestore(unsigned int irq, unsigned long *flags)
174 {
175 #ifdef CONFIG_LOCKDEP
176         local_irq_restore(*flags);
177 #endif
178         enable_irq(irq);
179 }
180
181 /* IRQ wakeup (PM) control: */
182 extern int set_irq_wake(unsigned int irq, unsigned int on);
183
184 static inline int enable_irq_wake(unsigned int irq)
185 {
186         return set_irq_wake(irq, 1);
187 }
188
189 static inline int disable_irq_wake(unsigned int irq)
190 {
191         return set_irq_wake(irq, 0);
192 }
193
194 #else /* !CONFIG_GENERIC_HARDIRQS */
195 /*
196  * NOTE: non-genirq architectures, if they want to support the lock
197  * validator need to define the methods below in their asm/irq.h
198  * files, under an #ifdef CONFIG_LOCKDEP section.
199  */
200 #ifndef CONFIG_LOCKDEP
201 #  define disable_irq_nosync_lockdep(irq)       disable_irq_nosync(irq)
202 #  define disable_irq_nosync_lockdep_irqsave(irq, flags) \
203                                                 disable_irq_nosync(irq)
204 #  define disable_irq_lockdep(irq)              disable_irq(irq)
205 #  define enable_irq_lockdep(irq)               enable_irq(irq)
206 #  define enable_irq_lockdep_irqrestore(irq, flags) \
207                                                 enable_irq(irq)
208 # endif
209
210 static inline int enable_irq_wake(unsigned int irq)
211 {
212         return 0;
213 }
214
215 static inline int disable_irq_wake(unsigned int irq)
216 {
217         return 0;
218 }
219 #endif /* CONFIG_GENERIC_HARDIRQS */
220
221 #ifndef __ARCH_SET_SOFTIRQ_PENDING
222 #define set_softirq_pending(x) (local_softirq_pending() = (x))
223 #define or_softirq_pending(x)  (local_softirq_pending() |= (x))
224 #endif
225
226 /*
227  * Temporary defines for UP kernels, until all code gets fixed.
228  */
229 #ifndef CONFIG_SMP
230 static inline void __deprecated cli(void)
231 {
232         local_irq_disable();
233 }
234 static inline void __deprecated sti(void)
235 {
236         local_irq_enable();
237 }
238 static inline void __deprecated save_flags(unsigned long *x)
239 {
240         local_save_flags(*x);
241 }
242 #define save_flags(x) save_flags(&x)
243 static inline void __deprecated restore_flags(unsigned long x)
244 {
245         local_irq_restore(x);
246 }
247
248 static inline void __deprecated save_and_cli(unsigned long *x)
249 {
250         local_irq_save(*x);
251 }
252 #define save_and_cli(x) save_and_cli(&x)
253 #endif /* CONFIG_SMP */
254
255 /* Some architectures might implement lazy enabling/disabling of
256  * interrupts. In some cases, such as stop_machine, we might want
257  * to ensure that after a local_irq_disable(), interrupts have
258  * really been disabled in hardware. Such architectures need to
259  * implement the following hook.
260  */
261 #ifndef hard_irq_disable
262 #define hard_irq_disable()      do { } while(0)
263 #endif
264
265 /* PLEASE, avoid to allocate new softirqs, if you need not _really_ high
266    frequency threaded job scheduling. For almost all the purposes
267    tasklets are more than enough. F.e. all serial device BHs et
268    al. should be converted to tasklets, not to softirqs.
269  */
270
271 enum
272 {
273         HI_SOFTIRQ=0,
274         TIMER_SOFTIRQ,
275         NET_TX_SOFTIRQ,
276         NET_RX_SOFTIRQ,
277         BLOCK_SOFTIRQ,
278         TASKLET_SOFTIRQ,
279         SCHED_SOFTIRQ,
280 #ifdef CONFIG_HIGH_RES_TIMERS
281         HRTIMER_SOFTIRQ,
282 #endif
283         RCU_SOFTIRQ,    /* Preferable RCU should always be the last softirq */
284 };
285
286 /* softirq mask and active fields moved to irq_cpustat_t in
287  * asm/hardirq.h to get better cache usage.  KAO
288  */
289
290 struct softirq_action
291 {
292         void    (*action)(struct softirq_action *);
293         void    *data;
294 };
295
296 asmlinkage void do_softirq(void);
297 asmlinkage void __do_softirq(void);
298 extern void open_softirq(int nr, void (*action)(struct softirq_action*), void *data);
299 extern void softirq_init(void);
300 #define __raise_softirq_irqoff(nr) do { or_softirq_pending(1UL << (nr)); } while (0)
301 extern void raise_softirq_irqoff(unsigned int nr);
302 extern void raise_softirq(unsigned int nr);
303
304
305 /* Tasklets --- multithreaded analogue of BHs.
306
307    Main feature differing them of generic softirqs: tasklet
308    is running only on one CPU simultaneously.
309
310    Main feature differing them of BHs: different tasklets
311    may be run simultaneously on different CPUs.
312
313    Properties:
314    * If tasklet_schedule() is called, then tasklet is guaranteed
315      to be executed on some cpu at least once after this.
316    * If the tasklet is already scheduled, but its excecution is still not
317      started, it will be executed only once.
318    * If this tasklet is already running on another CPU (or schedule is called
319      from tasklet itself), it is rescheduled for later.
320    * Tasklet is strictly serialized wrt itself, but not
321      wrt another tasklets. If client needs some intertask synchronization,
322      he makes it with spinlocks.
323  */
324
325 struct tasklet_struct
326 {
327         struct tasklet_struct *next;
328         unsigned long state;
329         atomic_t count;
330         void (*func)(unsigned long);
331         unsigned long data;
332 };
333
334 #define DECLARE_TASKLET(name, func, data) \
335 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data }
336
337 #define DECLARE_TASKLET_DISABLED(name, func, data) \
338 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data }
339
340
341 enum
342 {
343         TASKLET_STATE_SCHED,    /* Tasklet is scheduled for execution */
344         TASKLET_STATE_RUN       /* Tasklet is running (SMP only) */
345 };
346
347 #ifdef CONFIG_SMP
348 static inline int tasklet_trylock(struct tasklet_struct *t)
349 {
350         return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state);
351 }
352
353 static inline void tasklet_unlock(struct tasklet_struct *t)
354 {
355         smp_mb__before_clear_bit(); 
356         clear_bit(TASKLET_STATE_RUN, &(t)->state);
357 }
358
359 static inline void tasklet_unlock_wait(struct tasklet_struct *t)
360 {
361         while (test_bit(TASKLET_STATE_RUN, &(t)->state)) { barrier(); }
362 }
363 #else
364 #define tasklet_trylock(t) 1
365 #define tasklet_unlock_wait(t) do { } while (0)
366 #define tasklet_unlock(t) do { } while (0)
367 #endif
368
369 extern void __tasklet_schedule(struct tasklet_struct *t);
370
371 static inline void tasklet_schedule(struct tasklet_struct *t)
372 {
373         if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
374                 __tasklet_schedule(t);
375 }
376
377 extern void __tasklet_hi_schedule(struct tasklet_struct *t);
378
379 static inline void tasklet_hi_schedule(struct tasklet_struct *t)
380 {
381         if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
382                 __tasklet_hi_schedule(t);
383 }
384
385
386 static inline void tasklet_disable_nosync(struct tasklet_struct *t)
387 {
388         atomic_inc(&t->count);
389         smp_mb__after_atomic_inc();
390 }
391
392 static inline void tasklet_disable(struct tasklet_struct *t)
393 {
394         tasklet_disable_nosync(t);
395         tasklet_unlock_wait(t);
396         smp_mb();
397 }
398
399 static inline void tasklet_enable(struct tasklet_struct *t)
400 {
401         smp_mb__before_atomic_dec();
402         atomic_dec(&t->count);
403 }
404
405 static inline void tasklet_hi_enable(struct tasklet_struct *t)
406 {
407         smp_mb__before_atomic_dec();
408         atomic_dec(&t->count);
409 }
410
411 extern void tasklet_kill(struct tasklet_struct *t);
412 extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu);
413 extern void tasklet_init(struct tasklet_struct *t,
414                          void (*func)(unsigned long), unsigned long data);
415
416 /*
417  * Autoprobing for irqs:
418  *
419  * probe_irq_on() and probe_irq_off() provide robust primitives
420  * for accurate IRQ probing during kernel initialization.  They are
421  * reasonably simple to use, are not "fooled" by spurious interrupts,
422  * and, unlike other attempts at IRQ probing, they do not get hung on
423  * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards).
424  *
425  * For reasonably foolproof probing, use them as follows:
426  *
427  * 1. clear and/or mask the device's internal interrupt.
428  * 2. sti();
429  * 3. irqs = probe_irq_on();      // "take over" all unassigned idle IRQs
430  * 4. enable the device and cause it to trigger an interrupt.
431  * 5. wait for the device to interrupt, using non-intrusive polling or a delay.
432  * 6. irq = probe_irq_off(irqs);  // get IRQ number, 0=none, negative=multiple
433  * 7. service the device to clear its pending interrupt.
434  * 8. loop again if paranoia is required.
435  *
436  * probe_irq_on() returns a mask of allocated irq's.
437  *
438  * probe_irq_off() takes the mask as a parameter,
439  * and returns the irq number which occurred,
440  * or zero if none occurred, or a negative irq number
441  * if more than one irq occurred.
442  */
443
444 #if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE) 
445 static inline unsigned long probe_irq_on(void)
446 {
447         return 0;
448 }
449 static inline int probe_irq_off(unsigned long val)
450 {
451         return 0;
452 }
453 static inline unsigned int probe_irq_mask(unsigned long val)
454 {
455         return 0;
456 }
457 #else
458 extern unsigned long probe_irq_on(void);        /* returns 0 on failure */
459 extern int probe_irq_off(unsigned long);        /* returns 0 or negative on failure */
460 extern unsigned int probe_irq_mask(unsigned long);      /* returns mask of ISA interrupts */
461 #endif
462
463 #ifdef CONFIG_PROC_FS
464 /* Initialize /proc/irq/ */
465 extern void init_irq_proc(void);
466 #else
467 static inline void init_irq_proc(void)
468 {
469 }
470 #endif
471
472 int show_interrupts(struct seq_file *p, void *v);
473
474 #endif