drivers/video/omap/dispc.c

   1 /*
   2  * OMAP2 display controller support
   3  *
   4  * Copyright (C) 2005 Nokia Corporation
   5  * Author: Imre Deak <imre.deak@nokia.com>
   6  *
   7  * This program is free software; you can redistribute it and/or modify it
   8  * under the terms of the GNU General Public License as published by the
   9  * Free Software Foundation; either version 2 of the License, or (at your
  10  * option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful, but
  13  * WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  15  * General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License along
  18  * with this program; if not, write to the Free Software Foundation, Inc.,
  19  * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  20  */
  21 #include <linux/kernel.h>
  22 #include <linux/dma-mapping.h>
  23 #include <linux/vmalloc.h>
  24 #include <linux/clk.h>
  25 #include <linux/io.h>
  26
  27 #include <asm/arch/sram.h>
  28 #include <asm/arch/omapfb.h>
  29 #include <asm/arch/board.h>
  30
  31 #include "dispc.h"
  32
  33 #define MODULE_NAME                     "dispc"
  34
  35 #define DSS_BASE                        0x48050000
  36 #define DSS_SYSCONFIG                   0x0010
  37
  38 #define DISPC_BASE                      0x48050400
  39
  40 /* DISPC common */
  41 #define DISPC_REVISION                  0x0000
  42 #define DISPC_SYSCONFIG                 0x0010
  43 #define DISPC_SYSSTATUS                 0x0014
  44 #define DISPC_IRQSTATUS                 0x0018
  45 #define DISPC_IRQENABLE                 0x001C
  46 #define DISPC_CONTROL                   0x0040
  47 #define DISPC_CONFIG                    0x0044
  48 #define DISPC_CAPABLE                   0x0048
  49 #define DISPC_DEFAULT_COLOR0            0x004C
  50 #define DISPC_DEFAULT_COLOR1            0x0050
  51 #define DISPC_TRANS_COLOR0              0x0054
  52 #define DISPC_TRANS_COLOR1              0x0058
  53 #define DISPC_LINE_STATUS               0x005C
  54 #define DISPC_LINE_NUMBER               0x0060
  55 #define DISPC_TIMING_H                  0x0064
  56 #define DISPC_TIMING_V                  0x0068
  57 #define DISPC_POL_FREQ                  0x006C
  58 #define DISPC_DIVISOR                   0x0070
  59 #define DISPC_SIZE_DIG                  0x0078
  60 #define DISPC_SIZE_LCD                  0x007C
  61
  62 #define DISPC_DATA_CYCLE1               0x01D4
  63 #define DISPC_DATA_CYCLE2               0x01D8
  64 #define DISPC_DATA_CYCLE3               0x01DC
  65
  66 /* DISPC GFX plane */
  67 #define DISPC_GFX_BA0                   0x0080
  68 #define DISPC_GFX_BA1                   0x0084
  69 #define DISPC_GFX_POSITION              0x0088
  70 #define DISPC_GFX_SIZE                  0x008C
  71 #define DISPC_GFX_ATTRIBUTES            0x00A0
  72 #define DISPC_GFX_FIFO_THRESHOLD        0x00A4
  73 #define DISPC_GFX_FIFO_SIZE_STATUS      0x00A8
  74 #define DISPC_GFX_ROW_INC               0x00AC
  75 #define DISPC_GFX_PIXEL_INC             0x00B0
  76 #define DISPC_GFX_WINDOW_SKIP           0x00B4
  77 #define DISPC_GFX_TABLE_BA              0x00B8
  78
  79 /* DISPC Video plane 1/2 */
  80 #define DISPC_VID1_BASE                 0x00BC
  81 #define DISPC_VID2_BASE                 0x014C
  82
  83 /* Offsets into DISPC_VID1/2_BASE */
  84 #define DISPC_VID_BA0                   0x0000
  85 #define DISPC_VID_BA1                   0x0004
  86 #define DISPC_VID_POSITION              0x0008
  87 #define DISPC_VID_SIZE                  0x000C
  88 #define DISPC_VID_ATTRIBUTES            0x0010
  89 #define DISPC_VID_FIFO_THRESHOLD        0x0014
  90 #define DISPC_VID_FIFO_SIZE_STATUS      0x0018
  91 #define DISPC_VID_ROW_INC               0x001C
  92 #define DISPC_VID_PIXEL_INC             0x0020
  93 #define DISPC_VID_FIR                   0x0024
  94 #define DISPC_VID_PICTURE_SIZE          0x0028
  95 #define DISPC_VID_ACCU0                 0x002C
  96 #define DISPC_VID_ACCU1                 0x0030
  97
  98 /* 8 elements in 8 byte increments */
  99 #define DISPC_VID_FIR_COEF_H0           0x0034
 100 /* 8 elements in 8 byte increments */
 101 #define DISPC_VID_FIR_COEF_HV0          0x0038
 102 /* 5 elements in 4 byte increments */
 103 #define DISPC_VID_CONV_COEF0            0x0074
 104
 105 #define DISPC_IRQ_FRAMEMASK             0x0001
 106 #define DISPC_IRQ_VSYNC                 0x0002
 107 #define DISPC_IRQ_EVSYNC_EVEN           0x0004
 108 #define DISPC_IRQ_EVSYNC_ODD            0x0008
 109 #define DISPC_IRQ_ACBIAS_COUNT_STAT     0x0010
 110 #define DISPC_IRQ_PROG_LINE_NUM         0x0020
 111 #define DISPC_IRQ_GFX_FIFO_UNDERFLOW    0x0040
 112 #define DISPC_IRQ_GFX_END_WIN           0x0080
 113 #define DISPC_IRQ_PAL_GAMMA_MASK        0x0100
 114 #define DISPC_IRQ_OCP_ERR               0x0200
 115 #define DISPC_IRQ_VID1_FIFO_UNDERFLOW   0x0400
 116 #define DISPC_IRQ_VID1_END_WIN          0x0800
 117 #define DISPC_IRQ_VID2_FIFO_UNDERFLOW   0x1000
 118 #define DISPC_IRQ_VID2_END_WIN          0x2000
 119 #define DISPC_IRQ_SYNC_LOST             0x4000
 120
 121 #define DISPC_IRQ_MASK_ALL              0x7fff
 122
 123 #define DISPC_IRQ_MASK_ERROR            (DISPC_IRQ_GFX_FIFO_UNDERFLOW | \
 124                                              DISPC_IRQ_VID1_FIFO_UNDERFLOW | \
 125                                              DISPC_IRQ_VID2_FIFO_UNDERFLOW | \
 126                                              DISPC_IRQ_SYNC_LOST)
 127
 128 #define RFBI_CONTROL                    0x48050040
 129
 130 #define MAX_PALETTE_SIZE                (256 * 16)
 131
 132 #define FLD_MASK(pos, len)      (((1 << len) - 1) << pos)
 133
 134 #define MOD_REG_FLD(reg, mask, val) \
 135         dispc_write_reg((reg), (dispc_read_reg(reg) & ~(mask)) | (val));
 136
 137 #define OMAP2_SRAM_START                0x40200000
 138 /* Maximum size, in reality this is smaller if SRAM is partially locked. */
 139 #define OMAP2_SRAM_SIZE                 0xa0000         /* 640k */
 140
 141 /* We support the SDRAM / SRAM types. See OMAPFB_PLANE_MEMTYPE_* in omapfb.h */
 142 #define DISPC_MEMTYPE_NUM               2
 143
 144 #define RESMAP_SIZE(_page_cnt)                                          \
 145         ((_page_cnt + (sizeof(unsigned long) * 8) - 1) / 8)
 146 #define RESMAP_PTR(_res_map, _page_nr)                                  \
 147         (((_res_map)->map) + (_page_nr) / (sizeof(unsigned long) * 8))
 148 #define RESMAP_MASK(_page_nr)                                           \
 149         (1 << ((_page_nr) & (sizeof(unsigned long) * 8 - 1)))
 150
 151 struct resmap {
 152         unsigned long   start;
 153         unsigned        page_cnt;
 154         unsigned long   *map;
 155 };
 156
 157 static struct {
 158         u32             base;
 159
 160         struct omapfb_mem_desc  mem_desc;
 161         struct resmap           *res_map[DISPC_MEMTYPE_NUM];
 162         atomic_t                map_count[OMAPFB_PLANE_NUM];
 163
 164         dma_addr_t      palette_paddr;
 165         void            *palette_vaddr;
 166
 167         int             ext_mode;
 168
 169         unsigned long   enabled_irqs;
 170         void            (*irq_callback)(void *);
 171         void            *irq_callback_data;
 172         struct completion       frame_done;
 173
 174         int             fir_hinc[OMAPFB_PLANE_NUM];
 175         int             fir_vinc[OMAPFB_PLANE_NUM];
 176
 177         struct clk      *dss_ick, *dss1_fck;
 178         struct clk      *dss_54m_fck;
 179
 180         enum omapfb_update_mode update_mode;
 181         struct omapfb_device    *fbdev;
 182
 183         struct omapfb_color_key color_key;
 184 } dispc;
 185
 186 static void enable_lcd_clocks(int enable);
 187
 188 static void inline dispc_write_reg(int idx, u32 val)
 189 {
 190         __raw_writel(val, dispc.base + idx);
 191 }
 192
 193 static u32 inline dispc_read_reg(int idx)
 194 {
 195         u32 l = __raw_readl(dispc.base + idx);
 196         return l;
 197 }
 198
 199 /* Select RFBI or bypass mode */
 200 static void enable_rfbi_mode(int enable)
 201 {
 202         u32 l;
 203
 204         l = dispc_read_reg(DISPC_CONTROL);
 205         /* Enable RFBI, GPIO0/1 */
 206         l &= ~((1 << 11) | (1 << 15) | (1 << 16));
 207         l |= enable ? (1 << 11) : 0;
 208         /* RFBI En: GPIO0/1=10  RFBI Dis: GPIO0/1=11 */
 209         l |= 1 << 15;
 210         l |= enable ? 0 : (1 << 16);
 211         dispc_write_reg(DISPC_CONTROL, l);
 212
 213         /* Set bypass mode in RFBI module */
 214         l = __raw_readl(io_p2v(RFBI_CONTROL));
 215         l |= enable ? 0 : (1 << 1);
 216         __raw_writel(l, io_p2v(RFBI_CONTROL));
 217 }
 218
 219 static void set_lcd_data_lines(int data_lines)
 220 {
 221         u32 l;
 222         int code = 0;
 223
 224         switch (data_lines) {
 225         case 12:
 226                 code = 0;
 227                 break;
 228         case 16:
 229                 code = 1;
 230                 break;
 231         case 18:
 232                 code = 2;
 233                 break;
 234         case 24:
 235                 code = 3;
 236                 break;
 237         default:
 238                 BUG();
 239         }
 240
 241         l = dispc_read_reg(DISPC_CONTROL);
 242         l &= ~(0x03 << 8);
 243         l |= code << 8;
 244         dispc_write_reg(DISPC_CONTROL, l);
 245 }
 246
 247 static void set_load_mode(int mode)
 248 {
 249         BUG_ON(mode & ~(DISPC_LOAD_CLUT_ONLY | DISPC_LOAD_FRAME_ONLY |
 250                         DISPC_LOAD_CLUT_ONCE_FRAME));
 251         MOD_REG_FLD(DISPC_CONFIG, 0x03 << 1, mode << 1);
 252 }
 253
 254 void omap_dispc_set_lcd_size(int x, int y)
 255 {
 256         BUG_ON((x > (1 << 11)) || (y > (1 << 11)));
 257         enable_lcd_clocks(1);
 258         MOD_REG_FLD(DISPC_SIZE_LCD, FLD_MASK(16, 11) | FLD_MASK(0, 11),
 259                         ((y - 1) << 16) | (x - 1));
 260         enable_lcd_clocks(0);
 261 }
 262 EXPORT_SYMBOL(omap_dispc_set_lcd_size);
 263
 264 void omap_dispc_set_digit_size(int x, int y)
 265 {
 266         BUG_ON((x > (1 << 11)) || (y > (1 << 11)));
 267         enable_lcd_clocks(1);
 268         MOD_REG_FLD(DISPC_SIZE_DIG, FLD_MASK(16, 11) | FLD_MASK(0, 11),
 269                         ((y - 1) << 16) | (x - 1));
 270         enable_lcd_clocks(0);
 271 }
 272 EXPORT_SYMBOL(omap_dispc_set_digit_size);
 273
 274 static void setup_plane_fifo(int plane, int ext_mode)
 275 {
 276         const u32 ftrs_reg[] = { DISPC_GFX_FIFO_THRESHOLD,
 277                                 DISPC_VID1_BASE + DISPC_VID_FIFO_THRESHOLD,
 278                                 DISPC_VID2_BASE + DISPC_VID_FIFO_THRESHOLD };
 279         const u32 fsz_reg[] = { DISPC_GFX_FIFO_SIZE_STATUS,
 280                                 DISPC_VID1_BASE + DISPC_VID_FIFO_SIZE_STATUS,
 281                                 DISPC_VID2_BASE + DISPC_VID_FIFO_SIZE_STATUS };
 282         int low, high;
 283         u32 l;
 284
 285         BUG_ON(plane > 2);
 286
 287         l = dispc_read_reg(fsz_reg[plane]);
 288         l &= FLD_MASK(0, 9);
 289         if (ext_mode) {
 290                 low = l * 3 / 4;
 291                 high = l;
 292         } else {
 293                 low = l / 4;
 294                 high = l * 3 / 4;
 295         }
 296         MOD_REG_FLD(ftrs_reg[plane], FLD_MASK(16, 9) | FLD_MASK(0, 9),
 297                         (high << 16) | low);
 298 }
 299
 300 void omap_dispc_enable_lcd_out(int enable)
 301 {
 302         enable_lcd_clocks(1);
 303         MOD_REG_FLD(DISPC_CONTROL, 1, enable ? 1 : 0);
 304         enable_lcd_clocks(0);
 305 }
 306 EXPORT_SYMBOL(omap_dispc_enable_lcd_out);
 307
 308 void omap_dispc_enable_digit_out(int enable)
 309 {
 310         enable_lcd_clocks(1);
 311         MOD_REG_FLD(DISPC_CONTROL, 1 << 1, enable ? 1 << 1 : 0);
 312         enable_lcd_clocks(0);
 313 }
 314 EXPORT_SYMBOL(omap_dispc_enable_digit_out);
 315
 316 static inline int _setup_plane(int plane, int channel_out,
 317                                   u32 paddr, int screen_width,
 318                                   int pos_x, int pos_y, int width, int height,
 319                                   int color_mode)
 320 {
 321         const u32 at_reg[] = { DISPC_GFX_ATTRIBUTES,
 322                                 DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES,
 323                                 DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES };
 324         const u32 ba_reg[] = { DISPC_GFX_BA0, DISPC_VID1_BASE + DISPC_VID_BA0,
 325                                 DISPC_VID2_BASE + DISPC_VID_BA0 };
 326         const u32 ps_reg[] = { DISPC_GFX_POSITION,
 327                                 DISPC_VID1_BASE + DISPC_VID_POSITION,
 328                                 DISPC_VID2_BASE + DISPC_VID_POSITION };
 329         const u32 sz_reg[] = { DISPC_GFX_SIZE,
 330                                 DISPC_VID1_BASE + DISPC_VID_PICTURE_SIZE,
 331                                 DISPC_VID2_BASE + DISPC_VID_PICTURE_SIZE };
 332         const u32 ri_reg[] = { DISPC_GFX_ROW_INC,
 333                                 DISPC_VID1_BASE + DISPC_VID_ROW_INC,
 334                                 DISPC_VID2_BASE + DISPC_VID_ROW_INC };
 335         const u32 vs_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_SIZE,
 336                                 DISPC_VID2_BASE + DISPC_VID_SIZE };
 337
 338         int chout_shift, burst_shift;
 339         int chout_val;
 340         int color_code;
 341         int bpp;
 342         int cconv_en;
 343         int set_vsize;
 344         u32 l;
 345
 346 #ifdef VERBOSE
 347         dev_dbg(dispc.fbdev->dev, "plane %d channel %d paddr %#08x scr_width %d"
 348                     " pos_x %d pos_y %d width %d height %d color_mode %d\n",
 349                     plane, channel_out, paddr, screen_width, pos_x, pos_y,
 350                     width, height, color_mode);
 351 #endif
 352
 353         set_vsize = 0;
 354         switch (plane) {
 355         case OMAPFB_PLANE_GFX:
 356                 burst_shift = 6;
 357                 chout_shift = 8;
 358                 break;
 359         case OMAPFB_PLANE_VID1:
 360         case OMAPFB_PLANE_VID2:
 361                 burst_shift = 14;
 362                 chout_shift = 16;
 363                 set_vsize = 1;
 364                 break;
 365         default:
 366                 return -EINVAL;
 367         }
 368
 369         switch (channel_out) {
 370         case OMAPFB_CHANNEL_OUT_LCD:
 371                 chout_val = 0;
 372                 break;
 373         case OMAPFB_CHANNEL_OUT_DIGIT:
 374                 chout_val = 1;
 375                 break;
 376         default:
 377                 return -EINVAL;
 378         }
 379
 380         cconv_en = 0;
 381         switch (color_mode) {
 382         case OMAPFB_COLOR_RGB565:
 383                 color_code = DISPC_RGB_16_BPP;
 384                 bpp = 16;
 385                 break;
 386         case OMAPFB_COLOR_YUV422:
 387                 if (plane == 0)
 388                         return -EINVAL;
 389                 color_code = DISPC_UYVY_422;
 390                 cconv_en = 1;
 391                 bpp = 16;
 392                 break;
 393         case OMAPFB_COLOR_YUY422:
 394                 if (plane == 0)
 395                         return -EINVAL;
 396                 color_code = DISPC_YUV2_422;
 397                 cconv_en = 1;
 398                 bpp = 16;
 399                 break;
 400         default:
 401                 return -EINVAL;
 402         }
 403
 404         l = dispc_read_reg(at_reg[plane]);
 405
 406         l &= ~(0x0f << 1);
 407         l |= color_code << 1;
 408         l &= ~(1 << 9);
 409         l |= cconv_en << 9;
 410
 411         l &= ~(0x03 << burst_shift);
 412         l |= DISPC_BURST_8x32 << burst_shift;
 413
 414         l &= ~(1 << chout_shift);
 415         l |= chout_val << chout_shift;
 416
 417         dispc_write_reg(at_reg[plane], l);
 418
 419         dispc_write_reg(ba_reg[plane], paddr);
 420         MOD_REG_FLD(ps_reg[plane],
 421                     FLD_MASK(16, 11) | FLD_MASK(0, 11), (pos_y << 16) | pos_x);
 422
 423         MOD_REG_FLD(sz_reg[plane], FLD_MASK(16, 11) | FLD_MASK(0, 11),
 424                         ((height - 1) << 16) | (width - 1));
 425
 426         if (set_vsize) {
 427                 /* Set video size if set_scale hasn't set it */
 428                 if (!dispc.fir_vinc[plane])
 429                         MOD_REG_FLD(vs_reg[plane],
 430                                 FLD_MASK(16, 11), (height - 1) << 16);
 431                 if (!dispc.fir_hinc[plane])
 432                         MOD_REG_FLD(vs_reg[plane],
 433                                 FLD_MASK(0, 11), width - 1);
 434         }
 435
 436         dispc_write_reg(ri_reg[plane], (screen_width - width) * bpp / 8 + 1);
 437
 438         return height * screen_width * bpp / 8;
 439 }
 440
 441 static int omap_dispc_setup_plane(int plane, int channel_out,
 442                                   unsigned long offset,
 443                                   int screen_width,
 444                                   int pos_x, int pos_y, int width, int height,
 445                                   int color_mode)
 446 {
 447         u32 paddr;
 448         int r;
 449
 450         if ((unsigned)plane > dispc.mem_desc.region_cnt)
 451                 return -EINVAL;
 452         paddr = dispc.mem_desc.region[plane].paddr + offset;
 453         enable_lcd_clocks(1);
 454         r = _setup_plane(plane, channel_out, paddr,
 455                         screen_width,
 456                         pos_x, pos_y, width, height, color_mode);
 457         enable_lcd_clocks(0);
 458         return r;
 459 }
 460
 461 static void write_firh_reg(int plane, int reg, u32 value)
 462 {
 463         u32 base;
 464
 465         if (plane == 1)
 466                 base = DISPC_VID1_BASE + DISPC_VID_FIR_COEF_H0;
 467         else
 468                 base = DISPC_VID2_BASE + DISPC_VID_FIR_COEF_H0;
 469         dispc_write_reg(base + reg * 8, value);
 470 }
 471
 472 static void write_firhv_reg(int plane, int reg, u32 value)
 473 {
 474         u32 base;
 475
 476         if (plane == 1)
 477                 base = DISPC_VID1_BASE + DISPC_VID_FIR_COEF_HV0;
 478         else
 479                 base = DISPC_VID2_BASE + DISPC_VID_FIR_COEF_HV0;
 480         dispc_write_reg(base + reg * 8, value);
 481 }
 482
 483 static void set_upsampling_coef_table(int plane)
 484 {
 485         const u32 coef[][2] = {
 486                 { 0x00800000, 0x00800000 },
 487                 { 0x0D7CF800, 0x037B02FF },
 488                 { 0x1E70F5FF, 0x0C6F05FE },
 489                 { 0x335FF5FE, 0x205907FB },
 490                 { 0xF74949F7, 0x00404000 },
 491                 { 0xF55F33FB, 0x075920FE },
 492                 { 0xF5701EFE, 0x056F0CFF },
 493                 { 0xF87C0DFF, 0x027B0300 },
 494         };
 495         int i;
 496
 497         for (i = 0; i < 8; i++) {
 498                 write_firh_reg(plane, i, coef[i][0]);
 499                 write_firhv_reg(plane, i, coef[i][1]);
 500         }
 501 }
 502
 503 static int omap_dispc_set_scale(int plane,
 504                                 int orig_width, int orig_height,
 505                                 int out_width, int out_height)
 506 {
 507         const u32 at_reg[]  = { 0, DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES,
 508                                 DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES };
 509         const u32 vs_reg[]  = { 0, DISPC_VID1_BASE + DISPC_VID_SIZE,
 510                                 DISPC_VID2_BASE + DISPC_VID_SIZE };
 511         const u32 fir_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_FIR,
 512                                 DISPC_VID2_BASE + DISPC_VID_FIR };
 513
 514         u32 l;
 515         int fir_hinc;
 516         int fir_vinc;
 517
 518         if ((unsigned)plane > OMAPFB_PLANE_NUM)
 519                 return -ENODEV;
 520
 521         if (plane == OMAPFB_PLANE_GFX &&
 522             (out_width != orig_width || out_height != orig_height))
 523                 return -EINVAL;
 524
 525         enable_lcd_clocks(1);
 526         if (orig_width < out_width) {
 527                 /*
 528                  * Upsampling.
 529                  * Currently you can only scale both dimensions in one way.
 530                  */
 531                 if (orig_height > out_height ||
 532                     orig_width * 8 < out_width ||
 533                     orig_height * 8 < out_height) {
 534                         enable_lcd_clocks(0);
 535                         return -EINVAL;
 536                 }
 537                 set_upsampling_coef_table(plane);
 538         } else if (orig_width > out_width) {
 539                 /* Downsampling not yet supported
 540                 */
 541
 542                 enable_lcd_clocks(0);
 543                 return -EINVAL;
 544         }
 545         if (!orig_width || orig_width == out_width)
 546                 fir_hinc = 0;
 547         else
 548                 fir_hinc = 1024 * orig_width / out_width;
 549         if (!orig_height || orig_height == out_height)
 550                 fir_vinc = 0;
 551         else
 552                 fir_vinc = 1024 * orig_height / out_height;
 553         dispc.fir_hinc[plane] = fir_hinc;
 554         dispc.fir_vinc[plane] = fir_vinc;
 555
 556         MOD_REG_FLD(fir_reg[plane],
 557                     FLD_MASK(16, 12) | FLD_MASK(0, 12),
 558                     ((fir_vinc & 4095) << 16) |
 559                     (fir_hinc & 4095));
 560
 561         dev_dbg(dispc.fbdev->dev, "out_width %d out_height %d orig_width %d "
 562                 "orig_height %d fir_hinc  %d fir_vinc %d\n",
 563                 out_width, out_height, orig_width, orig_height,
 564                 fir_hinc, fir_vinc);
 565
 566         MOD_REG_FLD(vs_reg[plane],
 567                     FLD_MASK(16, 11) | FLD_MASK(0, 11),
 568                     ((out_height - 1) << 16) | (out_width - 1));
 569
 570         l = dispc_read_reg(at_reg[plane]);
 571         l &= ~(0x03 << 5);
 572         l |= fir_hinc ? (1 << 5) : 0;
 573         l |= fir_vinc ? (1 << 6) : 0;
 574         dispc_write_reg(at_reg[plane], l);
 575
 576         enable_lcd_clocks(0);
 577         return 0;
 578 }
 579
 580 static int omap_dispc_enable_plane(int plane, int enable)
 581 {
 582         const u32 at_reg[] = { DISPC_GFX_ATTRIBUTES,
 583                                 DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES,
 584                                 DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES };
 585         if ((unsigned int)plane > dispc.mem_desc.region_cnt)
 586                 return -EINVAL;
 587
 588         enable_lcd_clocks(1);
 589         MOD_REG_FLD(at_reg[plane], 1, enable ? 1 : 0);
 590         enable_lcd_clocks(0);
 591
 592         return 0;
 593 }
 594
 595 static int omap_dispc_set_color_key(struct omapfb_color_key *ck)
 596 {
 597         u32 df_reg, tr_reg;
 598         int shift, val;
 599
 600         switch (ck->channel_out) {
 601         case OMAPFB_CHANNEL_OUT_LCD:
 602                 df_reg = DISPC_DEFAULT_COLOR0;
 603                 tr_reg = DISPC_TRANS_COLOR0;
 604                 shift = 10;
 605                 break;
 606         case OMAPFB_CHANNEL_OUT_DIGIT:
 607                 df_reg = DISPC_DEFAULT_COLOR1;
 608                 tr_reg = DISPC_TRANS_COLOR1;
 609                 shift = 12;
 610                 break;
 611         default:
 612                 return -EINVAL;
 613         }
 614         switch (ck->key_type) {
 615         case OMAPFB_COLOR_KEY_DISABLED:
 616                 val = 0;
 617                 break;
 618         case OMAPFB_COLOR_KEY_GFX_DST:
 619                 val = 1;
 620                 break;
 621         case OMAPFB_COLOR_KEY_VID_SRC:
 622                 val = 3;
 623                 break;
 624         default:
 625                 return -EINVAL;
 626         }
 627         enable_lcd_clocks(1);
 628         MOD_REG_FLD(DISPC_CONFIG, FLD_MASK(shift, 2), val << shift);
 629
 630         if (val != 0)
 631                 dispc_write_reg(tr_reg, ck->trans_key);
 632         dispc_write_reg(df_reg, ck->background);
 633         enable_lcd_clocks(0);
 634
 635         dispc.color_key = *ck;
 636
 637         return 0;
 638 }
 639
 640 static int omap_dispc_get_color_key(struct omapfb_color_key *ck)
 641 {
 642         *ck = dispc.color_key;
 643         return 0;
 644 }
 645
 646 static void load_palette(void)
 647 {
 648 }
 649
 650 static int omap_dispc_set_update_mode(enum omapfb_update_mode mode)
 651 {
 652         int r = 0;
 653
 654         if (mode != dispc.update_mode) {
 655                 switch (mode) {
 656                 case OMAPFB_AUTO_UPDATE:
 657                 case OMAPFB_MANUAL_UPDATE:
 658                         enable_lcd_clocks(1);
 659                         omap_dispc_enable_lcd_out(1);
 660                         dispc.update_mode = mode;
 661                         break;
 662                 case OMAPFB_UPDATE_DISABLED:
 663                         init_completion(&dispc.frame_done);
 664                         omap_dispc_enable_lcd_out(0);
 665                         if (!wait_for_completion_timeout(&dispc.frame_done,
 666                                         msecs_to_jiffies(500))) {
 667                                 dev_err(dispc.fbdev->dev,
 668                                          "timeout waiting for FRAME DONE\n");
 669                         }
 670                         dispc.update_mode = mode;
 671                         enable_lcd_clocks(0);
 672                         break;
 673                 default:
 674                         r = -EINVAL;
 675                 }
 676         }
 677
 678         return r;
 679 }
 680
 681 static void omap_dispc_get_caps(int plane, struct omapfb_caps *caps)
 682 {
 683         caps->ctrl |= OMAPFB_CAPS_PLANE_RELOCATE_MEM;
 684         if (plane > 0)
 685                 caps->ctrl |= OMAPFB_CAPS_PLANE_SCALE;
 686         caps->plane_color |= (1 << OMAPFB_COLOR_RGB565) |
 687                              (1 << OMAPFB_COLOR_YUV422) |
 688                              (1 << OMAPFB_COLOR_YUY422);
 689         if (plane == 0)
 690                 caps->plane_color |= (1 << OMAPFB_COLOR_CLUT_8BPP) |
 691                                      (1 << OMAPFB_COLOR_CLUT_4BPP) |
 692                                      (1 << OMAPFB_COLOR_CLUT_2BPP) |
 693                                      (1 << OMAPFB_COLOR_CLUT_1BPP) |
 694                                      (1 << OMAPFB_COLOR_RGB444);
 695 }
 696
 697 static enum omapfb_update_mode omap_dispc_get_update_mode(void)
 698 {
 699         return dispc.update_mode;
 700 }
 701
 702 static void setup_color_conv_coef(void)
 703 {
 704         u32 mask = FLD_MASK(16, 11) | FLD_MASK(0, 11);
 705         int cf1_reg = DISPC_VID1_BASE + DISPC_VID_CONV_COEF0;
 706         int cf2_reg = DISPC_VID2_BASE + DISPC_VID_CONV_COEF0;
 707         int at1_reg = DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES;
 708         int at2_reg = DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES;
 709         const struct color_conv_coef {
 710                 int  ry,  rcr,  rcb,   gy,  gcr,  gcb,   by,  bcr,  bcb;
 711                 int  full_range;
 712         }  ctbl_bt601_5 = {
 713                     298,  409,    0,  298, -208, -100,  298,    0,  517, 0,
 714         };
 715         const struct color_conv_coef *ct;
 716 #define CVAL(x, y)      (((x & 2047) << 16) | (y & 2047))
 717
 718         ct = &ctbl_bt601_5;
 719
 720         MOD_REG_FLD(cf1_reg,            mask,   CVAL(ct->rcr, ct->ry));
 721         MOD_REG_FLD(cf1_reg + 4,        mask,   CVAL(ct->gy,  ct->rcb));
 722         MOD_REG_FLD(cf1_reg + 8,        mask,   CVAL(ct->gcb, ct->gcr));
 723         MOD_REG_FLD(cf1_reg + 12,       mask,   CVAL(ct->bcr, ct->by));
 724         MOD_REG_FLD(cf1_reg + 16,       mask,   CVAL(0,       ct->bcb));
 725
 726         MOD_REG_FLD(cf2_reg,            mask,   CVAL(ct->rcr, ct->ry));
 727         MOD_REG_FLD(cf2_reg + 4,        mask,   CVAL(ct->gy,  ct->rcb));
 728         MOD_REG_FLD(cf2_reg + 8,        mask,   CVAL(ct->gcb, ct->gcr));
 729         MOD_REG_FLD(cf2_reg + 12,       mask,   CVAL(ct->bcr, ct->by));
 730         MOD_REG_FLD(cf2_reg + 16,       mask,   CVAL(0,       ct->bcb));
 731 #undef CVAL
 732
 733         MOD_REG_FLD(at1_reg, (1 << 11), ct->full_range);
 734         MOD_REG_FLD(at2_reg, (1 << 11), ct->full_range);
 735 }
 736
 737 static void calc_ck_div(int is_tft, int pck, int *lck_div, int *pck_div)
 738 {
 739         unsigned long fck, lck;
 740
 741         *lck_div = 1;
 742         pck = max(1, pck);
 743         fck = clk_get_rate(dispc.dss1_fck);
 744         lck = fck;
 745         *pck_div = (lck + pck - 1) / pck;
 746         if (is_tft)
 747                 *pck_div = max(2, *pck_div);
 748         else
 749                 *pck_div = max(3, *pck_div);
 750         if (*pck_div > 255) {
 751                 *pck_div = 255;
 752                 lck = pck * *pck_div;
 753                 *lck_div = fck / lck;
 754                 BUG_ON(*lck_div < 1);
 755                 if (*lck_div > 255) {
 756                         *lck_div = 255;
 757                         dev_warn(dispc.fbdev->dev, "pixclock %d kHz too low.\n",
 758                                  pck / 1000);
 759                 }
 760         }
 761 }
 762
 763 static void set_lcd_tft_mode(int enable)
 764 {
 765         u32 mask;
 766
 767         mask = 1 << 3;
 768         MOD_REG_FLD(DISPC_CONTROL, mask, enable ? mask : 0);
 769 }
 770
 771 static void set_lcd_timings(void)
 772 {
 773         u32 l;
 774         int lck_div, pck_div;
 775         struct lcd_panel *panel = dispc.fbdev->panel;
 776         int is_tft = panel->config & OMAP_LCDC_PANEL_TFT;
 777         unsigned long fck;
 778
 779         l = dispc_read_reg(DISPC_TIMING_H);
 780         l &= ~(FLD_MASK(0, 6) | FLD_MASK(8, 8) | FLD_MASK(20, 8));
 781         l |= ( max(1, (min(64,  panel->hsw))) - 1 ) << 0;
 782         l |= ( max(1, (min(256, panel->hfp))) - 1 ) << 8;
 783         l |= ( max(1, (min(256, panel->hbp))) - 1 ) << 20;
 784         dispc_write_reg(DISPC_TIMING_H, l);
 785
 786         l = dispc_read_reg(DISPC_TIMING_V);
 787         l &= ~(FLD_MASK(0, 6) | FLD_MASK(8, 8) | FLD_MASK(20, 8));
 788         l |= ( max(1, (min(64,  panel->vsw))) - 1 ) << 0;
 789         l |= ( max(0, (min(255, panel->vfp))) - 0 ) << 8;
 790         l |= ( max(0, (min(255, panel->vbp))) - 0 ) << 20;
 791         dispc_write_reg(DISPC_TIMING_V, l);
 792
 793         l = dispc_read_reg(DISPC_POL_FREQ);
 794         l &= ~FLD_MASK(12, 6);
 795         l |= (panel->config & OMAP_LCDC_SIGNAL_MASK) << 12;
 796         l |= panel->acb & 0xff;
 797         dispc_write_reg(DISPC_POL_FREQ, l);
 798
 799         calc_ck_div(is_tft, panel->pixel_clock * 1000, &lck_div, &pck_div);
 800
 801         l = dispc_read_reg(DISPC_DIVISOR);
 802         l &= ~(FLD_MASK(16, 8) | FLD_MASK(0, 8));
 803         l |= (lck_div << 16) | (pck_div << 0);
 804         dispc_write_reg(DISPC_DIVISOR, l);
 805
 806         /* update panel info with the exact clock */
 807         fck = clk_get_rate(dispc.dss1_fck);
 808         panel->pixel_clock = fck / lck_div / pck_div / 1000;
 809 }
 810
 811 int omap_dispc_request_irq(void (*callback)(void *data), void *data)
 812 {
 813         int r = 0;
 814
 815         BUG_ON(callback == NULL);
 816
 817         if (dispc.irq_callback)
 818                 r = -EBUSY;
 819         else {
 820                 dispc.irq_callback = callback;
 821                 dispc.irq_callback_data = data;
 822         }
 823
 824         return r;
 825 }
 826 EXPORT_SYMBOL(omap_dispc_request_irq);
 827
 828 void omap_dispc_enable_irqs(int irq_mask)
 829 {
 830         enable_lcd_clocks(1);
 831         dispc.enabled_irqs = irq_mask;
 832         irq_mask |= DISPC_IRQ_MASK_ERROR;
 833         MOD_REG_FLD(DISPC_IRQENABLE, 0x7fff, irq_mask);
 834         enable_lcd_clocks(0);
 835 }
 836 EXPORT_SYMBOL(omap_dispc_enable_irqs);
 837
 838 void omap_dispc_disable_irqs(int irq_mask)
 839 {
 840         enable_lcd_clocks(1);
 841         dispc.enabled_irqs &= ~irq_mask;
 842         irq_mask &= ~DISPC_IRQ_MASK_ERROR;
 843         MOD_REG_FLD(DISPC_IRQENABLE, 0x7fff, irq_mask);
 844         enable_lcd_clocks(0);
 845 }
 846 EXPORT_SYMBOL(omap_dispc_disable_irqs);
 847
 848 void omap_dispc_free_irq(void)
 849 {
 850         enable_lcd_clocks(1);
 851         omap_dispc_disable_irqs(DISPC_IRQ_MASK_ALL);
 852         dispc.irq_callback = NULL;
 853         dispc.irq_callback_data = NULL;
 854         enable_lcd_clocks(0);
 855 }
 856 EXPORT_SYMBOL(omap_dispc_free_irq);
 857
 858 static irqreturn_t omap_dispc_irq_handler(int irq, void *dev)
 859 {
 860         u32 stat = dispc_read_reg(DISPC_IRQSTATUS);
 861
 862         if (stat & DISPC_IRQ_FRAMEMASK)
 863                 complete(&dispc.frame_done);
 864
 865         if (stat & DISPC_IRQ_MASK_ERROR) {
 866                 if (printk_ratelimit()) {
 867                         dev_err(dispc.fbdev->dev, "irq error status %04x\n",
 868                                 stat & 0x7fff);
 869                 }
 870         }
 871
 872         if ((stat & dispc.enabled_irqs) && dispc.irq_callback)
 873                 dispc.irq_callback(dispc.irq_callback_data);
 874
 875         dispc_write_reg(DISPC_IRQSTATUS, stat);
 876
 877         return IRQ_HANDLED;
 878 }
 879
 880 static int get_dss_clocks(void)
 881 {
 882         if (IS_ERR((dispc.dss_ick = clk_get(dispc.fbdev->dev, "dss_ick")))) {
 883                 dev_err(dispc.fbdev->dev, "can't get dss_ick\n");
 884                 return PTR_ERR(dispc.dss_ick);
 885         }
 886
 887         if (IS_ERR((dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck")))) {
 888                 dev_err(dispc.fbdev->dev, "can't get dss1_fck\n");
 889                 clk_put(dispc.dss_ick);
 890                 return PTR_ERR(dispc.dss1_fck);
 891         }
 892
 893         if (IS_ERR((dispc.dss_54m_fck =
 894                                 clk_get(dispc.fbdev->dev, "dss_54m_fck")))) {
 895                 dev_err(dispc.fbdev->dev, "can't get dss_54m_fck\n");
 896                 clk_put(dispc.dss_ick);
 897                 clk_put(dispc.dss1_fck);
 898                 return PTR_ERR(dispc.dss_54m_fck);
 899         }
 900
 901         return 0;
 902 }
 903
 904 static void put_dss_clocks(void)
 905 {
 906         clk_put(dispc.dss_54m_fck);
 907         clk_put(dispc.dss1_fck);
 908         clk_put(dispc.dss_ick);
 909 }
 910
 911 static void enable_lcd_clocks(int enable)
 912 {
 913         if (enable)
 914                 clk_enable(dispc.dss1_fck);
 915         else
 916                 clk_disable(dispc.dss1_fck);
 917 }
 918
 919 static void enable_interface_clocks(int enable)
 920 {
 921         if (enable)
 922                 clk_enable(dispc.dss_ick);
 923         else
 924                 clk_disable(dispc.dss_ick);
 925 }
 926
 927 static void enable_digit_clocks(int enable)
 928 {
 929         if (enable)
 930                 clk_enable(dispc.dss_54m_fck);
 931         else
 932                 clk_disable(dispc.dss_54m_fck);
 933 }
 934
 935 static void omap_dispc_suspend(void)
 936 {
 937         if (dispc.update_mode == OMAPFB_AUTO_UPDATE) {
 938                 init_completion(&dispc.frame_done);
 939                 omap_dispc_enable_lcd_out(0);
 940                 if (!wait_for_completion_timeout(&dispc.frame_done,
 941                                 msecs_to_jiffies(500))) {
 942                         dev_err(dispc.fbdev->dev,
 943                                 "timeout waiting for FRAME DONE\n");
 944                 }
 945                 enable_lcd_clocks(0);
 946         }
 947 }
 948
 949 static void omap_dispc_resume(void)
 950 {
 951         if (dispc.update_mode == OMAPFB_AUTO_UPDATE) {
 952                 enable_lcd_clocks(1);
 953                 if (!dispc.ext_mode) {
 954                         set_lcd_timings();
 955                         load_palette();
 956                 }
 957                 omap_dispc_enable_lcd_out(1);
 958         }
 959 }
 960
 961
 962 static int omap_dispc_update_window(struct fb_info *fbi,
 963                                  struct omapfb_update_window *win,
 964                                  void (*complete_callback)(void *arg),
 965                                  void *complete_callback_data)
 966 {
 967         return dispc.update_mode == OMAPFB_UPDATE_DISABLED ? -ENODEV : 0;
 968 }
 969
 970 static int mmap_kern(struct omapfb_mem_region *region)
 971 {
 972         struct vm_struct        *kvma;
 973         struct vm_area_struct   vma;
 974         pgprot_t                pgprot;
 975         unsigned long           vaddr;
 976
 977         kvma = get_vm_area(region->size, VM_IOREMAP);
 978         if (kvma == NULL) {
 979                 dev_err(dispc.fbdev->dev, "can't get kernel vm area\n");
 980                 return -ENOMEM;
 981         }
 982         vma.vm_mm = &init_mm;
 983
 984         vaddr = (unsigned long)kvma->addr;
 985
 986         pgprot = pgprot_writecombine(pgprot_kernel);
 987         vma.vm_start = vaddr;
 988         vma.vm_end = vaddr + region->size;
 989         if (io_remap_pfn_range(&vma, vaddr, region->paddr >> PAGE_SHIFT,
 990                            region->size, pgprot) < 0) {
 991                 dev_err(dispc.fbdev->dev, "kernel mmap for FBMEM failed\n");
 992                 return -EAGAIN;
 993         }
 994         region->vaddr = (void *)vaddr;
 995
 996         return 0;
 997 }
 998
 999 static void mmap_user_open(struct vm_area_struct *vma)
1000 {
1001         int plane = (int)vma->vm_private_data;
1002
1003         atomic_inc(&dispc.map_count[plane]);
1004 }
1005
1006 static void mmap_user_close(struct vm_area_struct *vma)
1007 {
1008         int plane = (int)vma->vm_private_data;
1009
1010         atomic_dec(&dispc.map_count[plane]);
1011 }
1012
1013 static struct vm_operations_struct mmap_user_ops = {
1014         .open = mmap_user_open,
1015         .close = mmap_user_close,
1016 };
1017
1018 static int omap_dispc_mmap_user(struct fb_info *info,
1019                                 struct vm_area_struct *vma)
1020 {
1021         struct omapfb_plane_struct *plane = info->par;
1022         unsigned long off;
1023         unsigned long start;
1024         u32 len;
1025
1026         if (vma->vm_end - vma->vm_start == 0)
1027                 return 0;
1028         if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
1029                 return -EINVAL;
1030         off = vma->vm_pgoff << PAGE_SHIFT;
1031
1032         start = info->fix.smem_start;
1033         len = info->fix.smem_len;
1034         if (off >= len)
1035                 return -EINVAL;
1036         if ((vma->vm_end - vma->vm_start + off) > len)
1037                 return -EINVAL;
1038         off += start;
1039         vma->vm_pgoff = off >> PAGE_SHIFT;
1040         vma->vm_flags |= VM_IO | VM_RESERVED;
1041         vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
1042         vma->vm_ops = &mmap_user_ops;
1043         vma->vm_private_data = (void *)plane->idx;
1044         if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
1045                              vma->vm_end - vma->vm_start, vma->vm_page_prot))
1046                 return -EAGAIN;
1047         /* vm_ops.open won't be called for mmap itself. */
1048         atomic_inc(&dispc.map_count[plane->idx]);
1049         return 0;
1050 }
1051
1052 static void unmap_kern(struct omapfb_mem_region *region)
1053 {
1054         vunmap(region->vaddr);
1055 }
1056
1057 static int alloc_palette_ram(void)
1058 {
1059         dispc.palette_vaddr = dma_alloc_writecombine(dispc.fbdev->dev,
1060                 MAX_PALETTE_SIZE, &dispc.palette_paddr, GFP_KERNEL);
1061         if (dispc.palette_vaddr == NULL) {
1062                 dev_err(dispc.fbdev->dev, "failed to alloc palette memory\n");
1063                 return -ENOMEM;
1064         }
1065
1066         return 0;
1067 }
1068
1069 static void free_palette_ram(void)
1070 {
1071         dma_free_writecombine(dispc.fbdev->dev, MAX_PALETTE_SIZE,
1072                         dispc.palette_vaddr, dispc.palette_paddr);
1073 }
1074
1075 static int alloc_fbmem(struct omapfb_mem_region *region)
1076 {
1077         region->vaddr = dma_alloc_writecombine(dispc.fbdev->dev,
1078                         region->size, &region->paddr, GFP_KERNEL);
1079
1080         if (region->vaddr == NULL) {
1081                 dev_err(dispc.fbdev->dev, "unable to allocate FB DMA memory\n");
1082                 return -ENOMEM;
1083         }
1084
1085         return 0;
1086 }
1087
1088 static void free_fbmem(struct omapfb_mem_region *region)
1089 {
1090         dma_free_writecombine(dispc.fbdev->dev, region->size,
1091                               region->vaddr, region->paddr);
1092 }
1093
1094 static struct resmap *init_resmap(unsigned long start, size_t size)
1095 {
1096         unsigned page_cnt;
1097         struct resmap *res_map;
1098
1099         page_cnt = PAGE_ALIGN(size) / PAGE_SIZE;
1100         res_map =
1101             kzalloc(sizeof(struct resmap) + RESMAP_SIZE(page_cnt), GFP_KERNEL);
1102         if (res_map == NULL)
1103                 return NULL;
1104         res_map->start = start;
1105         res_map->page_cnt = page_cnt;
1106         res_map->map = (unsigned long *)(res_map + 1);
1107         return res_map;
1108 }
1109
1110 static void cleanup_resmap(struct resmap *res_map)
1111 {
1112         kfree(res_map);
1113 }
1114
1115 static inline int resmap_mem_type(unsigned long start)
1116 {
1117         if (start >= OMAP2_SRAM_START &&
1118             start < OMAP2_SRAM_START + OMAP2_SRAM_SIZE)
1119                 return OMAPFB_MEMTYPE_SRAM;
1120         else
1121                 return OMAPFB_MEMTYPE_SDRAM;
1122 }
1123
1124 static inline int resmap_page_reserved(struct resmap *res_map, unsigned page_nr)
1125 {
1126         return *RESMAP_PTR(res_map, page_nr) & RESMAP_MASK(page_nr) ? 1 : 0;
1127 }
1128
1129 static inline void resmap_reserve_page(struct resmap *res_map, unsigned page_nr)
1130 {
1131         BUG_ON(resmap_page_reserved(res_map, page_nr));
1132         *RESMAP_PTR(res_map, page_nr) |= RESMAP_MASK(page_nr);
1133 }
1134
1135 static inline void resmap_free_page(struct resmap *res_map, unsigned page_nr)
1136 {
1137         BUG_ON(!resmap_page_reserved(res_map, page_nr));
1138         *RESMAP_PTR(res_map, page_nr) &= ~RESMAP_MASK(page_nr);
1139 }
1140
1141 static void resmap_reserve_region(unsigned long start, size_t size)
1142 {
1143
1144         struct resmap   *res_map;
1145         unsigned        start_page;
1146         unsigned        end_page;
1147         int             mtype;
1148         unsigned        i;
1149
1150         mtype = resmap_mem_type(start);
1151         res_map = dispc.res_map[mtype];
1152         dev_dbg(dispc.fbdev->dev, "reserve mem type %d start %08lx size %d\n",
1153                 mtype, start, size);
1154         start_page = (start - res_map->start) / PAGE_SIZE;
1155         end_page = start_page + PAGE_ALIGN(size) / PAGE_SIZE;
1156         for (i = start_page; i < end_page; i++)
1157                 resmap_reserve_page(res_map, i);
1158 }
1159
1160 static void resmap_free_region(unsigned long start, size_t size)
1161 {
1162         struct resmap   *res_map;
1163         unsigned        start_page;
1164         unsigned        end_page;
1165         unsigned        i;
1166         int             mtype;
1167
1168         mtype = resmap_mem_type(start);
1169         res_map = dispc.res_map[mtype];
1170         dev_dbg(dispc.fbdev->dev, "free mem type %d start %08lx size %d\n",
1171                 mtype, start, size);
1172         start_page = (start - res_map->start) / PAGE_SIZE;
1173         end_page = start_page + PAGE_ALIGN(size) / PAGE_SIZE;
1174         for (i = start_page; i < end_page; i++)
1175                 resmap_free_page(res_map, i);
1176 }
1177
1178 static unsigned long resmap_alloc_region(int mtype, size_t size)
1179 {
1180         unsigned i;
1181         unsigned total;
1182         unsigned start_page;
1183         unsigned long start;
1184         struct resmap *res_map = dispc.res_map[mtype];
1185
1186         BUG_ON(mtype >= DISPC_MEMTYPE_NUM || res_map == NULL || !size);
1187
1188         size = PAGE_ALIGN(size) / PAGE_SIZE;
1189         start_page = 0;
1190         total = 0;
1191         for (i = 0; i < res_map->page_cnt; i++) {
1192                 if (resmap_page_reserved(res_map, i)) {
1193                         start_page = i + 1;
1194                         total = 0;
1195                 } else if (++total == size)
1196                         break;
1197         }
1198         if (total < size)
1199                 return 0;
1200
1201         start = res_map->start + start_page * PAGE_SIZE;
1202         resmap_reserve_region(start, size * PAGE_SIZE);
1203
1204         return start;
1205 }
1206
1207 /* Note that this will only work for user mappings, we don't deal with
1208  * kernel mappings here, so fbcon will keep using the old region.
1209  */
1210 static int omap_dispc_setup_mem(int plane, size_t size, int mem_type,
1211                                 unsigned long *paddr)
1212 {
1213         struct omapfb_mem_region *rg;
1214         unsigned long new_addr = 0;
1215
1216         if ((unsigned)plane > dispc.mem_desc.region_cnt)
1217                 return -EINVAL;
1218         if (mem_type >= DISPC_MEMTYPE_NUM)
1219                 return -EINVAL;
1220         if (dispc.res_map[mem_type] == NULL)
1221                 return -ENOMEM;
1222         rg = &dispc.mem_desc.region[plane];
1223         if (size == rg->size && mem_type == rg->type)
1224                 return 0;
1225         if (atomic_read(&dispc.map_count[plane]))
1226                 return -EBUSY;
1227         if (rg->size != 0)
1228                 resmap_free_region(rg->paddr, rg->size);
1229         if (size != 0) {
1230                 new_addr = resmap_alloc_region(mem_type, size);
1231                 if (!new_addr) {
1232                         /* Reallocate old region. */
1233                         resmap_reserve_region(rg->paddr, rg->size);
1234                         return -ENOMEM;
1235                 }
1236         }
1237         rg->paddr = new_addr;
1238         rg->size = size;
1239         rg->type = mem_type;
1240
1241         *paddr = new_addr;
1242
1243         return 0;
1244 }
1245
1246 static int setup_fbmem(struct omapfb_mem_desc *req_md)
1247 {
1248         struct omapfb_mem_region        *rg;
1249         int i;
1250         int r;
1251         unsigned long                   mem_start[DISPC_MEMTYPE_NUM];
1252         unsigned long                   mem_end[DISPC_MEMTYPE_NUM];
1253
1254         if (!req_md->region_cnt) {
1255                 dev_err(dispc.fbdev->dev, "no memory regions defined\n");
1256                 return -ENOENT;
1257         }
1258
1259         rg = &req_md->region[0];
1260         memset(mem_start, 0xff, sizeof(mem_start));
1261         memset(mem_end, 0, sizeof(mem_end));
1262
1263         for (i = 0; i < req_md->region_cnt; i++, rg++) {
1264                 int mtype;
1265                 if (rg->paddr) {
1266                         rg->alloc = 0;
1267                         if (rg->vaddr == NULL) {
1268                                 rg->map = 1;
1269                                 if ((r = mmap_kern(rg)) < 0)
1270                                         return r;
1271                         }
1272                 } else {
1273                         if (rg->type != OMAPFB_MEMTYPE_SDRAM) {
1274                                 dev_err(dispc.fbdev->dev,
1275                                         "unsupported memory type\n");
1276                                 return -EINVAL;
1277                         }
1278                         rg->alloc = rg->map = 1;
1279                         if ((r = alloc_fbmem(rg)) < 0)
1280                                 return r;
1281                 }
1282                 mtype = rg->type;
1283
1284                 if (rg->paddr < mem_start[mtype])
1285                         mem_start[mtype] = rg->paddr;
1286                 if (rg->paddr + rg->size > mem_end[mtype])
1287                         mem_end[mtype] = rg->paddr + rg->size;
1288         }
1289
1290         for (i = 0; i < DISPC_MEMTYPE_NUM; i++) {
1291                 unsigned long start;
1292                 size_t size;
1293                 if (mem_end[i] == 0)
1294                         continue;
1295                 start = mem_start[i];
1296                 size = mem_end[i] - start;
1297                 dispc.res_map[i] = init_resmap(start, size);
1298                 r = -ENOMEM;
1299                 if (dispc.res_map[i] == NULL)
1300                         goto fail;
1301                 /* Initial state is that everything is reserved. This
1302                  * includes possible holes as well, which will never be
1303                  * freed.
1304                  */
1305                 resmap_reserve_region(start, size);
1306         }
1307
1308         dispc.mem_desc = *req_md;
1309
1310         return 0;
1311 fail:
1312         for (i = 0; i < DISPC_MEMTYPE_NUM; i++) {
1313                 if (dispc.res_map[i] != NULL)
1314                         cleanup_resmap(dispc.res_map[i]);
1315         }
1316         return r;
1317 }
1318
1319 static void cleanup_fbmem(void)
1320 {
1321         struct omapfb_mem_region *rg;
1322         int i;
1323
1324         for (i = 0; i < DISPC_MEMTYPE_NUM; i++) {
1325                 if (dispc.res_map[i] != NULL)
1326                         cleanup_resmap(dispc.res_map[i]);
1327         }
1328         rg = &dispc.mem_desc.region[0];
1329         for (i = 0; i < dispc.mem_desc.region_cnt; i++, rg++) {
1330                 if (rg->alloc)
1331                         free_fbmem(rg);
1332                 else {
1333                         if (rg->map)
1334                                 unmap_kern(rg);
1335                 }
1336         }
1337 }
1338
1339 static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode,
1340                            struct omapfb_mem_desc *req_vram)
1341 {
1342         int r;
1343         u32 l;
1344         struct lcd_panel *panel = fbdev->panel;
1345         int tmo = 10000;
1346         int skip_init = 0;
1347         int i;
1348
1349         memset(&dispc, 0, sizeof(dispc));
1350
1351         dispc.base = io_p2v(DISPC_BASE);
1352         dispc.fbdev = fbdev;
1353         dispc.ext_mode = ext_mode;
1354
1355         init_completion(&dispc.frame_done);
1356
1357         if ((r = get_dss_clocks()) < 0)
1358                 return r;
1359
1360         enable_interface_clocks(1);
1361         enable_lcd_clocks(1);
1362
1363 #ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT
1364         l = dispc_read_reg(DISPC_CONTROL);
1365         /* LCD enabled ? */
1366         if (l & 1) {
1367                 pr_info("omapfb: skipping hardware initialization\n");
1368                 skip_init = 1;
1369         }
1370 #endif
1371
1372         if (!skip_init) {
1373                 /* Reset monitoring works only w/ the 54M clk */
1374                 enable_digit_clocks(1);
1375
1376                 /* Soft reset */
1377                 MOD_REG_FLD(DISPC_SYSCONFIG, 1 << 1, 1 << 1);
1378
1379                 while (!(dispc_read_reg(DISPC_SYSSTATUS) & 1)) {
1380                         if (!--tmo) {
1381                                 dev_err(dispc.fbdev->dev, "soft reset failed\n");
1382                                 r = -ENODEV;
1383                                 enable_digit_clocks(0);
1384                                 goto fail1;
1385                         }
1386                 }
1387
1388                 enable_digit_clocks(0);
1389         }
1390
1391         /* Enable smart idle and autoidle */
1392         l = dispc_read_reg(DISPC_CONTROL);
1393         l &= ~((3 << 12) | (3 << 3));
1394         l |= (2 << 12) | (2 << 3) | (1 << 0);
1395         dispc_write_reg(DISPC_SYSCONFIG, l);
1396         omap_writel(1 << 0, DSS_BASE + DSS_SYSCONFIG);
1397
1398         /* Set functional clock autogating */
1399         l = dispc_read_reg(DISPC_CONFIG);
1400         l |= 1 << 9;
1401         dispc_write_reg(DISPC_CONFIG, l);
1402
1403         l = dispc_read_reg(DISPC_IRQSTATUS);
1404         dispc_write_reg(l, DISPC_IRQSTATUS);
1405
1406         /* Enable those that we handle always */
1407         omap_dispc_enable_irqs(DISPC_IRQ_FRAMEMASK);
1408
1409         if ((r = request_irq(INT_24XX_DSS_IRQ, omap_dispc_irq_handler,
1410                            0, MODULE_NAME, fbdev)) < 0) {
1411                 dev_err(dispc.fbdev->dev, "can't get DSS IRQ\n");
1412                 goto fail1;
1413         }
1414
1415         /* L3 firewall setting: enable access to OCM RAM */
1416         __raw_writel(0x402000b0, io_p2v(0x680050a0));
1417
1418         if ((r = alloc_palette_ram()) < 0)
1419                 goto fail2;
1420
1421         if ((r = setup_fbmem(req_vram)) < 0)
1422                 goto fail3;
1423
1424         if (!skip_init) {
1425                 for (i = 0; i < dispc.mem_desc.region_cnt; i++) {
1426                         memset(dispc.mem_desc.region[i].vaddr, 0,
1427                                 dispc.mem_desc.region[i].size);
1428                 }
1429
1430                 /* Set logic clock to fck, pixel clock to fck/2 for now */
1431                 MOD_REG_FLD(DISPC_DIVISOR, FLD_MASK(16, 8), 1 << 16);
1432                 MOD_REG_FLD(DISPC_DIVISOR, FLD_MASK(0, 8), 2 << 0);
1433
1434                 setup_plane_fifo(0, ext_mode);
1435                 setup_plane_fifo(1, ext_mode);
1436                 setup_plane_fifo(2, ext_mode);
1437
1438                 setup_color_conv_coef();
1439
1440                 set_lcd_tft_mode(panel->config & OMAP_LCDC_PANEL_TFT);
1441                 set_load_mode(DISPC_LOAD_FRAME_ONLY);
1442
1443                 if (!ext_mode) {
1444                         set_lcd_data_lines(panel->data_lines);
1445                         omap_dispc_set_lcd_size(panel->x_res, panel->y_res);
1446                         set_lcd_timings();
1447                 } else
1448                         set_lcd_data_lines(panel->bpp);
1449                 enable_rfbi_mode(ext_mode);
1450         }
1451
1452         l = dispc_read_reg(DISPC_REVISION);
1453         pr_info("omapfb: DISPC version %d.%d initialized\n",
1454                  l >> 4 & 0x0f, l & 0x0f);
1455         enable_lcd_clocks(0);
1456
1457         return 0;
1458 fail3:
1459         free_palette_ram();
1460 fail2:
1461         free_irq(INT_24XX_DSS_IRQ, fbdev);
1462 fail1:
1463         enable_lcd_clocks(0);
1464         enable_interface_clocks(0);
1465         put_dss_clocks();
1466
1467         return r;
1468 }
1469
1470 static void omap_dispc_cleanup(void)
1471 {
1472         int i;
1473
1474         omap_dispc_set_update_mode(OMAPFB_UPDATE_DISABLED);
1475         /* This will also disable clocks that are on */
1476         for (i = 0; i < dispc.mem_desc.region_cnt; i++)
1477                 omap_dispc_enable_plane(i, 0);
1478         cleanup_fbmem();
1479         free_palette_ram();
1480         free_irq(INT_24XX_DSS_IRQ, dispc.fbdev);
1481         enable_interface_clocks(0);
1482         put_dss_clocks();
1483 }
1484
1485 const struct lcd_ctrl omap2_int_ctrl = {
1486         .name                   = "internal",
1487         .init                   = omap_dispc_init,
1488         .cleanup                = omap_dispc_cleanup,
1489         .get_caps               = omap_dispc_get_caps,
1490         .set_update_mode        = omap_dispc_set_update_mode,
1491         .get_update_mode        = omap_dispc_get_update_mode,
1492         .update_window          = omap_dispc_update_window,
1493         .suspend                = omap_dispc_suspend,
1494         .resume                 = omap_dispc_resume,
1495         .setup_plane            = omap_dispc_setup_plane,
1496         .setup_mem              = omap_dispc_setup_mem,
1497         .set_scale              = omap_dispc_set_scale,
1498         .enable_plane           = omap_dispc_enable_plane,
1499         .set_color_key          = omap_dispc_set_color_key,
1500         .get_color_key          = omap_dispc_get_color_key,
1501         .mmap                   = omap_dispc_mmap_user,
1502 };