drivers/staging/winbond/reg.c

   1 #include "os_common.h"
   2
   3 ///////////////////////////////////////////////////////////////////////////////////////////////////
   4 // Original Phy.h
   5 //*****************************************************************************
   6
   7 /*****************************************************************************
   8 ; For MAXIM2825/6/7 Ver. 331 or more
   9 ; Edited by Tiger, Sep-17-2003
  10 ; revised by Ben, Sep-18-2003
  11
  12 0x00 0x000a2
  13 0x01 0x21cc0
  14 ;0x02 0x13802
  15 0x02 0x1383a
  16
  17 ;channe1 01 ; 0x03 0x30142 ; 0x04 0x0b333;
  18 ;channe1 02 ;0x03 0x32141 ;0x04 0x08444;
  19 ;channe1 03 ;0x03 0x32143 ;0x04 0x0aeee;
  20 ;channe1 04 ;0x03 0x32142 ;0x04 0x0b333;
  21 ;channe1 05 ;0x03 0x31141 ;0x04 0x08444;
  22 ;channe1 06 ;
  23 0x03 0x31143;
  24 0x04 0x0aeee;
  25 ;channe1 07 ;0x03 0x31142 ;0x04 0x0b333;
  26 ;channe1 08 ;0x03 0x33141 ;0x04 0x08444;
  27 ;channe1 09 ;0x03 0x33143 ;0x04 0x0aeee;
  28 ;channe1 10 ;0x03 0x33142 ;0x04 0x0b333;
  29 ;channe1 11 ;0x03 0x30941 ;0x04 0x08444;
  30 ;channe1 12 ;0x03 0x30943 ;0x04 0x0aeee;
  31 ;channe1 13 ;0x03 0x30942 ;0x04 0x0b333;
  32
  33 0x05 0x28986
  34 0x06 0x18008
  35 0x07 0x38400
  36 0x08 0x05100; 100 Hz DC
  37 ;0x08 0x05900; 30 KHz DC
  38 0x09 0x24f08
  39 0x0a 0x17e00, 0x17ea0
  40 0x0b 0x37d80
  41 0x0c 0x0c900 // 0x0ca00 (lager power 9db than 0x0c000), 0x0c000
  42 *****************************************************************************/
  43 // MAX2825 (pure b/g)
  44 u32 max2825_rf_data[] =
  45 {
  46     (0x00<<18)|0x000a2,
  47     (0x01<<18)|0x21cc0,
  48     (0x02<<18)|0x13806,
  49     (0x03<<18)|0x30142,
  50     (0x04<<18)|0x0b333,
  51     (0x05<<18)|0x289A6,
  52     (0x06<<18)|0x18008,
  53     (0x07<<18)|0x38000,
  54     (0x08<<18)|0x05100,
  55     (0x09<<18)|0x24f08,
  56     (0x0A<<18)|0x14000,
  57     (0x0B<<18)|0x37d80,
  58     (0x0C<<18)|0x0c100   // 11a: 0x0c300, 11g: 0x0c100
  59 };
  60
  61 u32 max2825_channel_data_24[][3] =
  62 {
  63     {(0x03<<18)|0x30142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 01
  64     {(0x03<<18)|0x32141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 02
  65     {(0x03<<18)|0x32143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 03
  66     {(0x03<<18)|0x32142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 04
  67     {(0x03<<18)|0x31141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 05
  68     {(0x03<<18)|0x31143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 06
  69     {(0x03<<18)|0x31142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 07
  70     {(0x03<<18)|0x33141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 08
  71     {(0x03<<18)|0x33143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 09
  72     {(0x03<<18)|0x33142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 10
  73     {(0x03<<18)|0x30941, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 11
  74     {(0x03<<18)|0x30943, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 12
  75     {(0x03<<18)|0x30942, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 13
  76     {(0x03<<18)|0x32941, (0x04<<18)|0x09999, (0x05<<18)|0x289A6} // 14 (2484MHz) hhmodify
  77 };
  78
  79 u32 max2825_power_data_24[] = {(0x0C<<18)|0x0c000, (0x0C<<18)|0x0c100};
  80
  81 /****************************************************************************/
  82 // MAX2827 (a/b/g)
  83 u32 max2827_rf_data[] =
  84 {
  85     (0x00<<18)|0x000a2,
  86     (0x01<<18)|0x21cc0,
  87     (0x02<<18)|0x13806,
  88     (0x03<<18)|0x30142,
  89     (0x04<<18)|0x0b333,
  90     (0x05<<18)|0x289A6,
  91     (0x06<<18)|0x18008,
  92     (0x07<<18)|0x38000,
  93     (0x08<<18)|0x05100,
  94     (0x09<<18)|0x24f08,
  95     (0x0A<<18)|0x14000,
  96     (0x0B<<18)|0x37d80,
  97     (0x0C<<18)|0x0c100   // 11a: 0x0c300, 11g: 0x0c100
  98 };
  99
 100 u32 max2827_channel_data_24[][3] =
 101 {
 102     {(0x03<<18)|0x30142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 01
 103     {(0x03<<18)|0x32141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 02
 104     {(0x03<<18)|0x32143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 03
 105     {(0x03<<18)|0x32142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 04
 106     {(0x03<<18)|0x31141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 05
 107     {(0x03<<18)|0x31143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 06
 108     {(0x03<<18)|0x31142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 07
 109     {(0x03<<18)|0x33141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 08
 110     {(0x03<<18)|0x33143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 09
 111     {(0x03<<18)|0x33142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 10
 112     {(0x03<<18)|0x30941, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 11
 113     {(0x03<<18)|0x30943, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 12
 114     {(0x03<<18)|0x30942, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 13
 115     {(0x03<<18)|0x32941, (0x04<<18)|0x09999, (0x05<<18)|0x289A6}  // 14 (2484MHz) hhmodify
 116 };
 117
 118 u32 max2827_channel_data_50[][3] =
 119 {
 120     {(0x03<<18)|0x33cc3, (0x04<<18)|0x08ccc, (0x05<<18)|0x2A9A6}, // channel 36
 121     {(0x03<<18)|0x302c0, (0x04<<18)|0x08000, (0x05<<18)|0x2A9A6}, // channel 40
 122     {(0x03<<18)|0x302c2, (0x04<<18)|0x0b333, (0x05<<18)|0x2A9A6}, // channel 44
 123     {(0x03<<18)|0x322c1, (0x04<<18)|0x09999, (0x05<<18)|0x2A9A6}, // channel 48
 124     {(0x03<<18)|0x312c1, (0x04<<18)|0x0a666, (0x05<<18)|0x2A9A6}, // channel 52
 125     {(0x03<<18)|0x332c3, (0x04<<18)|0x08ccc, (0x05<<18)|0x2A9A6}, // channel 56
 126     {(0x03<<18)|0x30ac0, (0x04<<18)|0x08000, (0x05<<18)|0x2A9A6}, // channel 60
 127     {(0x03<<18)|0x30ac2, (0x04<<18)|0x0b333, (0x05<<18)|0x2A9A6} // channel 64
 128 };
 129
 130 u32 max2827_power_data_24[] = {(0x0C<<18)|0x0C000, (0x0C<<18)|0x0D600, (0x0C<<18)|0x0C100};
 131 u32 max2827_power_data_50[] = {(0x0C<<18)|0x0C400, (0x0C<<18)|0x0D500, (0x0C<<18)|0x0C300};
 132
 133 /****************************************************************************/
 134 // MAX2828 (a/b/g)
 135 u32 max2828_rf_data[] =
 136 {
 137     (0x00<<18)|0x000a2,
 138     (0x01<<18)|0x21cc0,
 139     (0x02<<18)|0x13806,
 140     (0x03<<18)|0x30142,
 141     (0x04<<18)|0x0b333,
 142     (0x05<<18)|0x289A6,
 143     (0x06<<18)|0x18008,
 144     (0x07<<18)|0x38000,
 145     (0x08<<18)|0x05100,
 146     (0x09<<18)|0x24f08,
 147     (0x0A<<18)|0x14000,
 148     (0x0B<<18)|0x37d80,
 149     (0x0C<<18)|0x0c100   // 11a: 0x0c300, 11g: 0x0c100
 150 };
 151
 152 u32 max2828_channel_data_24[][3] =
 153 {
 154     {(0x03<<18)|0x30142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 01
 155     {(0x03<<18)|0x32141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 02
 156     {(0x03<<18)|0x32143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 03
 157     {(0x03<<18)|0x32142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 04
 158     {(0x03<<18)|0x31141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 05
 159     {(0x03<<18)|0x31143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 06
 160     {(0x03<<18)|0x31142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 07
 161     {(0x03<<18)|0x33141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 08
 162     {(0x03<<18)|0x33143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 09
 163     {(0x03<<18)|0x33142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 10
 164     {(0x03<<18)|0x30941, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 11
 165     {(0x03<<18)|0x30943, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 12
 166     {(0x03<<18)|0x30942, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 13
 167     {(0x03<<18)|0x32941, (0x04<<18)|0x09999, (0x05<<18)|0x289A6}  // 14 (2484MHz) hhmodify
 168 };
 169
 170 u32 max2828_channel_data_50[][3] =
 171 {
 172     {(0x03<<18)|0x33cc3, (0x04<<18)|0x08ccc, (0x05<<18)|0x289A6}, // channel 36
 173     {(0x03<<18)|0x302c0, (0x04<<18)|0x08000, (0x05<<18)|0x289A6}, // channel 40
 174     {(0x03<<18)|0x302c2, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channel 44
 175     {(0x03<<18)|0x322c1, (0x04<<18)|0x09999, (0x05<<18)|0x289A6}, // channel 48
 176     {(0x03<<18)|0x312c1, (0x04<<18)|0x0a666, (0x05<<18)|0x289A6}, // channel 52
 177     {(0x03<<18)|0x332c3, (0x04<<18)|0x08ccc, (0x05<<18)|0x289A6}, // channel 56
 178     {(0x03<<18)|0x30ac0, (0x04<<18)|0x08000, (0x05<<18)|0x289A6}, // channel 60
 179     {(0x03<<18)|0x30ac2, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6} // channel 64
 180 };
 181
 182 u32 max2828_power_data_24[] = {(0x0C<<18)|0x0c000, (0x0C<<18)|0x0c100};
 183 u32 max2828_power_data_50[] = {(0x0C<<18)|0x0c000, (0x0C<<18)|0x0c100};
 184
 185 /****************************************************************************/
 186 // LA20040728 kevin
 187 // MAX2829 (a/b/g)
 188 u32 max2829_rf_data[] =
 189 {
 190     (0x00<<18)|0x000a2,
 191     (0x01<<18)|0x23520,
 192     (0x02<<18)|0x13802,
 193     (0x03<<18)|0x30142,
 194     (0x04<<18)|0x0b333,
 195     (0x05<<18)|0x28906,
 196     (0x06<<18)|0x18008,
 197     (0x07<<18)|0x3B500,
 198     (0x08<<18)|0x05100,
 199     (0x09<<18)|0x24f08,
 200     (0x0A<<18)|0x14000,
 201     (0x0B<<18)|0x37d80,
 202     (0x0C<<18)|0x0F300 //TXVGA=51, (MAX-6 dB)
 203 };
 204
 205 u32 max2829_channel_data_24[][3] =
 206 {
 207     {(3<<18)|0x30142, (4<<18)|0x0b333, (5<<18)|0x289C6},  // 01 (2412MHz)
 208     {(3<<18)|0x32141, (4<<18)|0x08444, (5<<18)|0x289C6},  // 02 (2417MHz)
 209     {(3<<18)|0x32143, (4<<18)|0x0aeee, (5<<18)|0x289C6},  // 03 (2422MHz)
 210     {(3<<18)|0x32142, (4<<18)|0x0b333, (5<<18)|0x289C6},  // 04 (2427MHz)
 211     {(3<<18)|0x31141, (4<<18)|0x08444, (5<<18)|0x289C6},  // 05 (2432MHz)
 212     {(3<<18)|0x31143, (4<<18)|0x0aeee, (5<<18)|0x289C6},  // 06 (2437MHz)
 213     {(3<<18)|0x31142, (4<<18)|0x0b333, (5<<18)|0x289C6},  // 07 (2442MHz)
 214     {(3<<18)|0x33141, (4<<18)|0x08444, (5<<18)|0x289C6},  // 08 (2447MHz)
 215     {(3<<18)|0x33143, (4<<18)|0x0aeee, (5<<18)|0x289C6},  // 09 (2452MHz)
 216     {(3<<18)|0x33142, (4<<18)|0x0b333, (5<<18)|0x289C6},  // 10 (2457MHz)
 217     {(3<<18)|0x30941, (4<<18)|0x08444, (5<<18)|0x289C6},  // 11 (2462MHz)
 218     {(3<<18)|0x30943, (4<<18)|0x0aeee, (5<<18)|0x289C6},  // 12 (2467MHz)
 219     {(3<<18)|0x30942, (4<<18)|0x0b333, (5<<18)|0x289C6},  // 13 (2472MHz)
 220     {(3<<18)|0x32941, (4<<18)|0x09999, (5<<18)|0x289C6},  // 14 (2484MHz) hh-modify
 221 };
 222
 223 u32 max2829_channel_data_50[][4] =
 224 {
 225      {36, (3<<18)|0x33cc3, (4<<18)|0x08ccc, (5<<18)|0x2A946}, // 36 (5.180GHz)
 226      {40, (3<<18)|0x302c0, (4<<18)|0x08000, (5<<18)|0x2A946}, // 40 (5.200GHz)
 227      {44, (3<<18)|0x302c2, (4<<18)|0x0b333, (5<<18)|0x2A946}, // 44 (5.220GHz)
 228      {48, (3<<18)|0x322c1, (4<<18)|0x09999, (5<<18)|0x2A946}, // 48 (5.240GHz)
 229      {52, (3<<18)|0x312c1, (4<<18)|0x0a666, (5<<18)|0x2A946}, // 52 (5.260GHz)
 230      {56, (3<<18)|0x332c3, (4<<18)|0x08ccc, (5<<18)|0x2A946}, // 56 (5.280GHz)
 231      {60, (3<<18)|0x30ac0, (4<<18)|0x08000, (5<<18)|0x2A946}, // 60 (5.300GHz)
 232      {64, (3<<18)|0x30ac2, (4<<18)|0x0b333, (5<<18)|0x2A946}, // 64 (5.320GHz)
 233
 234     {100, (3<<18)|0x30ec0, (4<<18)|0x08000, (5<<18)|0x2A9C6}, // 100 (5.500GHz)
 235     {104, (3<<18)|0x30ec2, (4<<18)|0x0b333, (5<<18)|0x2A9C6}, // 104 (5.520GHz)
 236     {108, (3<<18)|0x32ec1, (4<<18)|0x09999, (5<<18)|0x2A9C6}, // 108 (5.540GHz)
 237     {112, (3<<18)|0x31ec1, (4<<18)|0x0a666, (5<<18)|0x2A9C6}, // 112 (5.560GHz)
 238     {116, (3<<18)|0x33ec3, (4<<18)|0x08ccc, (5<<18)|0x2A9C6}, // 116 (5.580GHz)
 239     {120, (3<<18)|0x301c0, (4<<18)|0x08000, (5<<18)|0x2A9C6}, // 120 (5.600GHz)
 240     {124, (3<<18)|0x301c2, (4<<18)|0x0b333, (5<<18)|0x2A9C6}, // 124 (5.620GHz)
 241     {128, (3<<18)|0x321c1, (4<<18)|0x09999, (5<<18)|0x2A9C6}, // 128 (5.640GHz)
 242     {132, (3<<18)|0x311c1, (4<<18)|0x0a666, (5<<18)|0x2A9C6}, // 132 (5.660GHz)
 243     {136, (3<<18)|0x331c3, (4<<18)|0x08ccc, (5<<18)|0x2A9C6}, // 136 (5.680GHz)
 244     {140, (3<<18)|0x309c0, (4<<18)|0x08000, (5<<18)|0x2A9C6}, // 140 (5.700GHz)
 245
 246     {149, (3<<18)|0x329c2, (4<<18)|0x0b333, (5<<18)|0x2A9C6}, // 149 (5.745GHz)
 247     {153, (3<<18)|0x319c1, (4<<18)|0x09999, (5<<18)|0x2A9C6}, // 153 (5.765GHz)
 248     {157, (3<<18)|0x339c1, (4<<18)|0x0a666, (5<<18)|0x2A9C6}, // 157 (5.785GHz)
 249     {161, (3<<18)|0x305c3, (4<<18)|0x08ccc, (5<<18)|0x2A9C6}, // 161 (5.805GHz)
 250
 251     // Japan
 252     { 184, (3<<18)|0x308c2, (4<<18)|0x0b333, (5<<18)|0x2A946}, // 184 (4.920GHz)
 253     { 188, (3<<18)|0x328c1, (4<<18)|0x09999, (5<<18)|0x2A946}, // 188 (4.940GHz)
 254     { 192, (3<<18)|0x318c1, (4<<18)|0x0a666, (5<<18)|0x2A946}, // 192 (4.960GHz)
 255     { 196, (3<<18)|0x338c3, (4<<18)|0x08ccc, (5<<18)|0x2A946}, // 196 (4.980GHz)
 256     {   8, (3<<18)|0x324c1, (4<<18)|0x09999, (5<<18)|0x2A946}, //   8 (5.040GHz)
 257     {  12, (3<<18)|0x314c1, (4<<18)|0x0a666, (5<<18)|0x2A946}, //  12 (5.060GHz)
 258     {  16, (3<<18)|0x334c3, (4<<18)|0x08ccc, (5<<18)|0x2A946}, //  16 (5.080GHz)
 259     {  34, (3<<18)|0x31cc2, (4<<18)|0x0b333, (5<<18)|0x2A946}, //  34 (5.170GHz)
 260     {  38, (3<<18)|0x33cc1, (4<<18)|0x09999, (5<<18)|0x2A946}, //  38 (5.190GHz)
 261     {  42, (3<<18)|0x302c1, (4<<18)|0x0a666, (5<<18)|0x2A946}, //  42 (5.210GHz)
 262     {  46, (3<<18)|0x322c3, (4<<18)|0x08ccc, (5<<18)|0x2A946}, //  46 (5.230GHz)
 263 };
 264
 265 /*****************************************************************************
 266 ; For MAXIM2825/6/7 Ver. 317 or less
 267 ; Edited by Tiger, Sep-17-2003  for 2.4Ghz channels
 268 ; Updated by Tiger, Sep-22-2003 for 5.0Ghz channels
 269 ; Corrected by Tiger, Sep-23-2003, for 0x03 and 0x04 of 5.0Ghz channels
 270
 271 0x00 0x00080
 272 0x01 0x214c0
 273 0x02 0x13802
 274
 275 ;2.4GHz Channels
 276 ;channe1 01 (2.412GHz); 0x03 0x30143 ;0x04 0x0accc
 277 ;channe1 02 (2.417GHz); 0x03 0x32140 ;0x04 0x09111
 278 ;channe1 03 (2.422GHz); 0x03 0x32142 ;0x04 0x0bbbb
 279 ;channe1 04 (2.427GHz); 0x03 0x32143 ;0x04 0x0accc
 280 ;channe1 05 (2.432GHz); 0x03 0x31140 ;0x04 0x09111
 281 ;channe1 06 (2.437GHz); 0x03 0x31142 ;0x04 0x0bbbb
 282 ;channe1 07 (2.442GHz); 0x03 0x31143 ;0x04 0x0accc
 283 ;channe1 08 (2.447GHz); 0x03 0x33140 ;0x04 0x09111
 284 ;channe1 09 (2.452GHz); 0x03 0x33142 ;0x04 0x0bbbb
 285 ;channe1 10 (2.457GHz); 0x03 0x33143 ;0x04 0x0accc
 286 ;channe1 11 (2.462GHz); 0x03 0x30940 ;0x04 0x09111
 287 ;channe1 12 (2.467GHz); 0x03 0x30942 ;0x04 0x0bbbb
 288 ;channe1 13 (2.472GHz); 0x03 0x30943 ;0x04 0x0accc
 289
 290 ;5.0Ghz Channels
 291 ;channel 36 (5.180GHz); 0x03 0x33cc0 ;0x04 0x0b333
 292 ;channel 40 (5.200GHz); 0x03 0x302c0 ;0x04 0x08000
 293 ;channel 44 (5.220GHz); 0x03 0x302c2 ;0x04 0x0b333
 294 ;channel 48 (5.240GHz); 0x03 0x322c1 ;0x04 0x09999
 295 ;channel 52 (5.260GHz); 0x03 0x312c1 ;0x04 0x0a666
 296 ;channel 56 (5.280GHz); 0x03 0x332c3 ;0x04 0x08ccc
 297 ;channel 60 (5.300GHz); 0x03 0x30ac0 ;0x04 0x08000
 298 ;channel 64 (5.320GHz); 0x03 0x30ac2 ;0x04 0x08333
 299
 300 ;2.4GHz band ;0x05 0x28986;
 301 ;5.0GHz band
 302 0x05 0x2a986
 303
 304 0x06 0x18008
 305 0x07 0x38400
 306 0x08 0x05108
 307 0x09 0x27ff8
 308 0x0a 0x14000
 309 0x0b 0x37f99
 310 0x0c 0x0c000
 311 *****************************************************************************/
 312 u32 maxim_317_rf_data[]     =
 313 {
 314     (0x00<<18)|0x000a2,
 315     (0x01<<18)|0x214c0,
 316     (0x02<<18)|0x13802,
 317     (0x03<<18)|0x30143,
 318     (0x04<<18)|0x0accc,
 319     (0x05<<18)|0x28986,
 320     (0x06<<18)|0x18008,
 321     (0x07<<18)|0x38400,
 322     (0x08<<18)|0x05108,
 323     (0x09<<18)|0x27ff8,
 324     (0x0A<<18)|0x14000,
 325     (0x0B<<18)|0x37f99,
 326     (0x0C<<18)|0x0c000
 327 };
 328
 329 u32 maxim_317_channel_data_24[][3]    =
 330 {
 331     {(0x03<<18)|0x30143, (0x04<<18)|0x0accc, (0x05<<18)|0x28986}, // channe1 01
 332     {(0x03<<18)|0x32140, (0x04<<18)|0x09111, (0x05<<18)|0x28986}, // channe1 02
 333     {(0x03<<18)|0x32142, (0x04<<18)|0x0bbbb, (0x05<<18)|0x28986}, // channe1 03
 334     {(0x03<<18)|0x32143, (0x04<<18)|0x0accc, (0x05<<18)|0x28986}, // channe1 04
 335     {(0x03<<18)|0x31140, (0x04<<18)|0x09111, (0x05<<18)|0x28986}, // channe1 05
 336     {(0x03<<18)|0x31142, (0x04<<18)|0x0bbbb, (0x05<<18)|0x28986}, // channe1 06
 337     {(0x03<<18)|0x31143, (0x04<<18)|0x0accc, (0x05<<18)|0x28986}, // channe1 07
 338     {(0x03<<18)|0x33140, (0x04<<18)|0x09111, (0x05<<18)|0x28986}, // channe1 08
 339     {(0x03<<18)|0x33142, (0x04<<18)|0x0bbbb, (0x05<<18)|0x28986}, // channe1 09
 340     {(0x03<<18)|0x33143, (0x04<<18)|0x0accc, (0x05<<18)|0x28986}, // channe1 10
 341     {(0x03<<18)|0x30940, (0x04<<18)|0x09111, (0x05<<18)|0x28986}, // channe1 11
 342     {(0x03<<18)|0x30942, (0x04<<18)|0x0bbbb, (0x05<<18)|0x28986}, // channe1 12
 343     {(0x03<<18)|0x30943, (0x04<<18)|0x0accc, (0x05<<18)|0x28986} // channe1 13
 344 };
 345
 346 u32 maxim_317_channel_data_50[][3]    =
 347 {
 348     {(0x03<<18)|0x33cc0, (0x04<<18)|0x0b333, (0x05<<18)|0x2a986}, // channel 36
 349     {(0x03<<18)|0x302c0, (0x04<<18)|0x08000, (0x05<<18)|0x2a986}, // channel 40
 350     {(0x03<<18)|0x302c3, (0x04<<18)|0x0accc, (0x05<<18)|0x2a986}, // channel 44
 351     {(0x03<<18)|0x322c1, (0x04<<18)|0x09666, (0x05<<18)|0x2a986}, // channel 48
 352     {(0x03<<18)|0x312c2, (0x04<<18)|0x09999, (0x05<<18)|0x2a986}, // channel 52
 353     {(0x03<<18)|0x332c0, (0x04<<18)|0x0b333, (0x05<<18)|0x2a99e}, // channel 56
 354     {(0x03<<18)|0x30ac0, (0x04<<18)|0x08000, (0x05<<18)|0x2a99e}, // channel 60
 355     {(0x03<<18)|0x30ac3, (0x04<<18)|0x0accc, (0x05<<18)|0x2a99e} // channel 64
 356 };
 357
 358 u32 maxim_317_power_data_24[] = {(0x0C<<18)|0x0c000, (0x0C<<18)|0x0c100};
 359 u32 maxim_317_power_data_50[] = {(0x0C<<18)|0x0c000, (0x0C<<18)|0x0c100};
 360
 361 /*****************************************************************************
 362 ;;AL2230 MP (Mass Production Version)
 363 ;;RF Registers Setting for Airoha AL2230 silicon after June 1st, 2004
 364 ;;Updated by Tiger Huang (June 1st, 2004)
 365 ;;20-bit length and LSB first
 366
 367 ;;Ch01 (2412MHz) ;0x00 0x09EFC ;0x01 0x8CCCC;
 368 ;;Ch02 (2417MHz) ;0x00 0x09EFC ;0x01 0x8CCCD;
 369 ;;Ch03 (2422MHz) ;0x00 0x09E7C ;0x01 0x8CCCC;
 370 ;;Ch04 (2427MHz) ;0x00 0x09E7C ;0x01 0x8CCCD;
 371 ;;Ch05 (2432MHz) ;0x00 0x05EFC ;0x01 0x8CCCC;
 372 ;;Ch06 (2437MHz) ;0x00 0x05EFC ;0x01 0x8CCCD;
 373 ;;Ch07 (2442MHz) ;0x00 0x05E7C ;0x01 0x8CCCC;
 374 ;;Ch08 (2447MHz) ;0x00 0x05E7C ;0x01 0x8CCCD;
 375 ;;Ch09 (2452MHz) ;0x00 0x0DEFC ;0x01 0x8CCCC;
 376 ;;Ch10 (2457MHz) ;0x00 0x0DEFC ;0x01 0x8CCCD;
 377 ;;Ch11 (2462MHz) ;0x00 0x0DE7C ;0x01 0x8CCCC;
 378 ;;Ch12 (2467MHz) ;0x00 0x0DE7C ;0x01 0x8CCCD;
 379 ;;Ch13 (2472MHz) ;0x00 0x03EFC ;0x01 0x8CCCC;
 380 ;;Ch14 (2484Mhz) ;0x00 0x03E7C ;0x01 0x86666;
 381
 382 0x02 0x401D8; RXDCOC BW 100Hz for RXHP low
 383 ;;0x02 0x481DC; RXDCOC BW 30Khz for RXHP low
 384
 385 0x03 0xCFFF0
 386 0x04 0x23800
 387 0x05 0xA3B72
 388 0x06 0x6DA01
 389 0x07 0xE1688
 390 0x08 0x11600
 391 0x09 0x99E02
 392 0x0A 0x5DDB0
 393 0x0B 0xD9900
 394 0x0C 0x3FFBD
 395 0x0D 0xB0000
 396 0x0F 0xF00A0
 397
 398 ;RF Calibration for Airoha AL2230
 399 ;Edit by Ben Chang (01/30/04)
 400 ;Updated by Tiger Huang (03/03/04)
 401 0x0f 0xf00a0 ; Initial Setting
 402 0x0f 0xf00b0 ; Activate TX DCC
 403 0x0f 0xf02a0 ; Activate Phase Calibration
 404 0x0f 0xf00e0 ; Activate Filter RC Calibration
 405 0x0f 0xf00a0 ; Restore Initial Setting
 406 *****************************************************************************/
 407
 408 u32 al2230_rf_data[]     =
 409 {
 410     (0x00<<20)|0x09EFC,
 411     (0x01<<20)|0x8CCCC,
 412     (0x02<<20)|0x40058,// 20060627 Anson 0x401D8,
 413     (0x03<<20)|0xCFFF0,
 414     (0x04<<20)|0x24100,// 20060627 Anson 0x23800,
 415     (0x05<<20)|0xA3B2F,// 20060627 Anson 0xA3B72
 416     (0x06<<20)|0x6DA01,
 417     (0x07<<20)|0xE3628,// 20060627 Anson 0xE1688,
 418     (0x08<<20)|0x11600,
 419     (0x09<<20)|0x9DC02,// 20060627 Anosn 0x97602,//0x99E02, //0x9AE02
 420     (0x0A<<20)|0x5ddb0, // 941206 For QCOM interference 0x588b0,//0x5DDB0, 940601 adj 0x5aa30 for bluetooth
 421     (0x0B<<20)|0xD9900,
 422     (0x0C<<20)|0x3FFBD,
 423     (0x0D<<20)|0xB0000,
 424     (0x0F<<20)|0xF01A0 // 20060627 Anson 0xF00A0
 425 };
 426
 427 u32 al2230s_rf_data[]     =
 428 {
 429     (0x00<<20)|0x09EFC,
 430     (0x01<<20)|0x8CCCC,
 431     (0x02<<20)|0x40058,// 20060419 0x401D8,
 432     (0x03<<20)|0xCFFF0,
 433     (0x04<<20)|0x24100,// 20060419 0x23800,
 434     (0x05<<20)|0xA3B2F,// 20060419 0xA3B72,
 435     (0x06<<20)|0x6DA01,
 436     (0x07<<20)|0xE3628,// 20060419 0xE1688,
 437     (0x08<<20)|0x11600,
 438     (0x09<<20)|0x9DC02,// 20060419 0x97602,//0x99E02, //0x9AE02
 439     (0x0A<<20)|0x5DDB0,// 941206 For QCOM interference 0x588b0,//0x5DDB0, 940601 adj 0x5aa30 for bluetooth
 440     (0x0B<<20)|0xD9900,
 441     (0x0C<<20)|0x3FFBD,
 442     (0x0D<<20)|0xB0000,
 443     (0x0F<<20)|0xF01A0 // 20060419 0xF00A0
 444 };
 445
 446 u32 al2230_channel_data_24[][2] =
 447 {
 448     {(0x00<<20)|0x09EFC, (0x01<<20)|0x8CCCC}, // channe1 01
 449     {(0x00<<20)|0x09EFC, (0x01<<20)|0x8CCCD}, // channe1 02
 450     {(0x00<<20)|0x09E7C, (0x01<<20)|0x8CCCC}, // channe1 03
 451     {(0x00<<20)|0x09E7C, (0x01<<20)|0x8CCCD}, // channe1 04
 452     {(0x00<<20)|0x05EFC, (0x01<<20)|0x8CCCC}, // channe1 05
 453     {(0x00<<20)|0x05EFC, (0x01<<20)|0x8CCCD}, // channe1 06
 454     {(0x00<<20)|0x05E7C, (0x01<<20)|0x8CCCC}, // channe1 07
 455     {(0x00<<20)|0x05E7C, (0x01<<20)|0x8CCCD}, // channe1 08
 456     {(0x00<<20)|0x0DEFC, (0x01<<20)|0x8CCCC}, // channe1 09
 457     {(0x00<<20)|0x0DEFC, (0x01<<20)|0x8CCCD}, // channe1 10
 458     {(0x00<<20)|0x0DE7C, (0x01<<20)|0x8CCCC}, // channe1 11
 459     {(0x00<<20)|0x0DE7C, (0x01<<20)|0x8CCCD}, // channe1 12
 460     {(0x00<<20)|0x03EFC, (0x01<<20)|0x8CCCC}, // channe1 13
 461     {(0x00<<20)|0x03E7C, (0x01<<20)|0x86666} // channe1 14
 462 };
 463
 464 // Current setting. u32 airoha_power_data_24[] = {(0x09<<20)|0x90202, (0x09<<20)|0x96602, (0x09<<20)|0x97602};
 465 #define AIROHA_TXVGA_LOW_INDEX          31              // Index for 0x90202
 466 #define AIROHA_TXVGA_MIDDLE_INDEX       12              // Index for 0x96602
 467 #define AIROHA_TXVGA_HIGH_INDEX         8               // Index for 0x97602 1.0.24.0 1.0.28.0
 468 /*
 469 u32 airoha_power_data_24[] =
 470 {
 471     0x9FE02,          // Max - 0 dB
 472     0x9BE02,          // Max - 1 dB
 473     0x9DE02,          // Max - 2 dB
 474     0x99E02,          // Max - 3 dB
 475     0x9EE02,          // Max - 4 dB
 476     0x9AE02,          // Max - 5 dB
 477     0x9CE02,          // Max - 6 dB
 478     0x98E02,          // Max - 7 dB
 479     0x97602,          // Max - 8 dB
 480     0x93602,          // Max - 9 dB
 481     0x95602,          // Max - 10 dB
 482     0x91602,          // Max - 11 dB
 483     0x96602,          // Max - 12 dB
 484     0x92602,          // Max - 13 dB
 485     0x94602,          // Max - 14 dB
 486     0x90602,          // Max - 15 dB
 487     0x97A02,          // Max - 16 dB
 488     0x93A02,          // Max - 17 dB
 489     0x95A02,          // Max - 18 dB
 490     0x91A02,          // Max - 19 dB
 491     0x96A02,          // Max - 20 dB
 492     0x92A02,          // Max - 21 dB
 493     0x94A02,          // Max - 22 dB
 494     0x90A02,          // Max - 23 dB
 495     0x97202,          // Max - 24 dB
 496     0x93202,          // Max - 25 dB
 497     0x95202,          // Max - 26 dB
 498     0x91202,          // Max - 27 dB
 499     0x96202,          // Max - 28 dB
 500     0x92202,          // Max - 29 dB
 501     0x94202,          // Max - 30 dB
 502     0x90202           // Max - 31 dB
 503 };
 504 */
 505
 506 // 20040927 1.1.69.1000 ybjiang
 507 // from John
 508 u32 al2230_txvga_data[][2] =
 509 {
 510         //value , index
 511         {0x090202, 0},
 512         {0x094202, 2},
 513         {0x092202, 4},
 514         {0x096202, 6},
 515         {0x091202, 8},
 516         {0x095202, 10},
 517         {0x093202, 12},
 518         {0x097202, 14},
 519         {0x090A02, 16},
 520         {0x094A02, 18},
 521         {0x092A02, 20},
 522         {0x096A02, 22},
 523         {0x091A02, 24},
 524         {0x095A02, 26},
 525         {0x093A02, 28},
 526         {0x097A02, 30},
 527         {0x090602, 32},
 528         {0x094602, 34},
 529         {0x092602, 36},
 530         {0x096602, 38},
 531         {0x091602, 40},
 532         {0x095602, 42},
 533         {0x093602, 44},
 534         {0x097602, 46},
 535         {0x090E02, 48},
 536         {0x098E02, 49},
 537         {0x094E02, 50},
 538         {0x09CE02, 51},
 539         {0x092E02, 52},
 540         {0x09AE02, 53},
 541         {0x096E02, 54},
 542         {0x09EE02, 55},
 543         {0x091E02, 56},
 544         {0x099E02, 57},
 545         {0x095E02, 58},
 546         {0x09DE02, 59},
 547         {0x093E02, 60},
 548         {0x09BE02, 61},
 549         {0x097E02, 62},
 550         {0x09FE02, 63}
 551 };
 552
 553 //--------------------------------
 554 // For Airoha AL7230, 2.4Ghz band
 555 // Edit by Tiger, (March, 9, 2005)
 556 // 24bit, MSB first
 557
 558 //channel independent registers:
 559 u32 al7230_rf_data_24[] =
 560 {
 561         (0x00<<24)|0x003790,
 562         (0x01<<24)|0x133331,
 563         (0x02<<24)|0x841FF2,
 564         (0x03<<24)|0x3FDFA3,
 565         (0x04<<24)|0x7FD784,
 566         (0x05<<24)|0x802B55,
 567         (0x06<<24)|0x56AF36,
 568         (0x07<<24)|0xCE0207,
 569         (0x08<<24)|0x6EBC08,
 570         (0x09<<24)|0x221BB9,
 571         (0x0A<<24)|0xE0000A,
 572         (0x0B<<24)|0x08071B,
 573         (0x0C<<24)|0x000A3C,
 574         (0x0D<<24)|0xFFFFFD,
 575         (0x0E<<24)|0x00000E,
 576         (0x0F<<24)|0x1ABA8F
 577 };
 578
 579 u32 al7230_channel_data_24[][2] =
 580 {
 581     {(0x00<<24)|0x003790, (0x01<<24)|0x133331}, // channe1 01
 582     {(0x00<<24)|0x003790, (0x01<<24)|0x1B3331}, // channe1 02
 583     {(0x00<<24)|0x003790, (0x01<<24)|0x033331}, // channe1 03
 584     {(0x00<<24)|0x003790, (0x01<<24)|0x0B3331}, // channe1 04
 585     {(0x00<<24)|0x0037A0, (0x01<<24)|0x133331}, // channe1 05
 586     {(0x00<<24)|0x0037A0, (0x01<<24)|0x1B3331}, // channe1 06
 587     {(0x00<<24)|0x0037A0, (0x01<<24)|0x033331}, // channe1 07
 588     {(0x00<<24)|0x0037A0, (0x01<<24)|0x0B3331}, // channe1 08
 589     {(0x00<<24)|0x0037B0, (0x01<<24)|0x133331}, // channe1 09
 590     {(0x00<<24)|0x0037B0, (0x01<<24)|0x1B3331}, // channe1 10
 591     {(0x00<<24)|0x0037B0, (0x01<<24)|0x033331}, // channe1 11
 592     {(0x00<<24)|0x0037B0, (0x01<<24)|0x0B3331}, // channe1 12
 593     {(0x00<<24)|0x0037C0, (0x01<<24)|0x133331}, // channe1 13
 594         {(0x00<<24)|0x0037C0, (0x01<<24)|0x066661}  // channel 14
 595 };
 596
 597 //channel independent registers:
 598 u32 al7230_rf_data_50[] =
 599 {
 600         (0x00<<24)|0x0FF520,
 601         (0x01<<24)|0x000001,
 602         (0x02<<24)|0x451FE2,
 603         (0x03<<24)|0x5FDFA3,
 604         (0x04<<24)|0x6FD784,
 605         (0x05<<24)|0x853F55,
 606         (0x06<<24)|0x56AF36,
 607         (0x07<<24)|0xCE0207,
 608         (0x08<<24)|0x6EBC08,
 609         (0x09<<24)|0x221BB9,
 610         (0x0A<<24)|0xE0600A,
 611         (0x0B<<24)|0x08044B,
 612         (0x0C<<24)|0x00143C,
 613         (0x0D<<24)|0xFFFFFD,
 614         (0x0E<<24)|0x00000E,
 615         (0x0F<<24)|0x12BACF //5Ghz default state
 616 };
 617
 618 u32 al7230_channel_data_5[][4] =
 619 {
 620         //channel dependent registers: 0x00, 0x01 and 0x04
 621         //11J ===========
 622         {184, (0x00<<24)|0x0FF520, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 184
 623         {188, (0x00<<24)|0x0FF520, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 188
 624         {192, (0x00<<24)|0x0FF530, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 192
 625         {196, (0x00<<24)|0x0FF530, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 196
 626         {8,   (0x00<<24)|0x0FF540, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 008
 627         {12,  (0x00<<24)|0x0FF540, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 012
 628         {16,  (0x00<<24)|0x0FF550, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 016
 629         {34,  (0x00<<24)|0x0FF560, (0x01<<24)|0x055551, (0x04<<24)|0x77F784}, // channel 034
 630         {38,  (0x00<<24)|0x0FF570, (0x01<<24)|0x100001, (0x04<<24)|0x77F784}, // channel 038
 631         {42,  (0x00<<24)|0x0FF570, (0x01<<24)|0x1AAAA1, (0x04<<24)|0x77F784}, // channel 042
 632         {46,  (0x00<<24)|0x0FF570, (0x01<<24)|0x055551, (0x04<<24)|0x77F784}, // channel 046
 633         //11 A/H =========
 634         {36,  (0x00<<24)|0x0FF560, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 036
 635         {40,  (0x00<<24)|0x0FF570, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 040
 636         {44,  (0x00<<24)|0x0FF570, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 044
 637         {48,  (0x00<<24)|0x0FF570, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 048
 638         {52,  (0x00<<24)|0x0FF580, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 052
 639         {56,  (0x00<<24)|0x0FF580, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 056
 640         {60,  (0x00<<24)|0x0FF580, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 060
 641         {64,  (0x00<<24)|0x0FF590, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 064
 642         {100, (0x00<<24)|0x0FF5C0, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 100
 643         {104, (0x00<<24)|0x0FF5C0, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 104
 644         {108, (0x00<<24)|0x0FF5C0, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 108
 645         {112, (0x00<<24)|0x0FF5D0, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 112
 646         {116, (0x00<<24)|0x0FF5D0, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 116
 647         {120, (0x00<<24)|0x0FF5D0, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 120
 648         {124, (0x00<<24)|0x0FF5E0, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 124
 649         {128, (0x00<<24)|0x0FF5E0, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 128
 650         {132, (0x00<<24)|0x0FF5E0, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 132
 651         {136, (0x00<<24)|0x0FF5F0, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 136
 652         {140, (0x00<<24)|0x0FF5F0, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 140
 653         {149, (0x00<<24)|0x0FF600, (0x01<<24)|0x180001, (0x04<<24)|0x77F784}, // channel 149
 654         {153, (0x00<<24)|0x0FF600, (0x01<<24)|0x02AAA1, (0x04<<24)|0x77F784}, // channel 153
 655         {157, (0x00<<24)|0x0FF600, (0x01<<24)|0x0D5551, (0x04<<24)|0x77F784}, // channel 157
 656         {161, (0x00<<24)|0x0FF610, (0x01<<24)|0x180001, (0x04<<24)|0x77F784}, // channel 161
 657         {165, (0x00<<24)|0x0FF610, (0x01<<24)|0x02AAA1, (0x04<<24)|0x77F784}  // channel 165
 658 };
 659
 660 //; RF Calibration <=== Register 0x0F
 661 //0x0F 0x1ABA8F; start from 2.4Ghz default state
 662 //0x0F 0x9ABA8F; TXDC compensation
 663 //0x0F 0x3ABA8F; RXFIL adjustment
 664 //0x0F 0x1ABA8F; restore 2.4Ghz default state
 665
 666 //;TXVGA Mapping Table <=== Register 0x0B
 667 u32 al7230_txvga_data[][2] =
 668 {
 669         {0x08040B, 0}, //TXVGA=0;
 670         {0x08041B, 1}, //TXVGA=1;
 671         {0x08042B, 2}, //TXVGA=2;
 672         {0x08043B, 3}, //TXVGA=3;
 673         {0x08044B, 4}, //TXVGA=4;
 674         {0x08045B, 5}, //TXVGA=5;
 675         {0x08046B, 6}, //TXVGA=6;
 676         {0x08047B, 7}, //TXVGA=7;
 677         {0x08048B, 8}, //TXVGA=8;
 678         {0x08049B, 9}, //TXVGA=9;
 679         {0x0804AB, 10}, //TXVGA=10;
 680         {0x0804BB, 11}, //TXVGA=11;
 681         {0x0804CB, 12}, //TXVGA=12;
 682         {0x0804DB, 13}, //TXVGA=13;
 683         {0x0804EB, 14}, //TXVGA=14;
 684         {0x0804FB, 15}, //TXVGA=15;
 685         {0x08050B, 16}, //TXVGA=16;
 686         {0x08051B, 17}, //TXVGA=17;
 687         {0x08052B, 18}, //TXVGA=18;
 688         {0x08053B, 19}, //TXVGA=19;
 689         {0x08054B, 20}, //TXVGA=20;
 690         {0x08055B, 21}, //TXVGA=21;
 691         {0x08056B, 22}, //TXVGA=22;
 692         {0x08057B, 23}, //TXVGA=23;
 693         {0x08058B, 24}, //TXVGA=24;
 694         {0x08059B, 25}, //TXVGA=25;
 695         {0x0805AB, 26}, //TXVGA=26;
 696         {0x0805BB, 27}, //TXVGA=27;
 697         {0x0805CB, 28}, //TXVGA=28;
 698         {0x0805DB, 29}, //TXVGA=29;
 699         {0x0805EB, 30}, //TXVGA=30;
 700         {0x0805FB, 31}, //TXVGA=31;
 701         {0x08060B, 32}, //TXVGA=32;
 702         {0x08061B, 33}, //TXVGA=33;
 703         {0x08062B, 34}, //TXVGA=34;
 704         {0x08063B, 35}, //TXVGA=35;
 705         {0x08064B, 36}, //TXVGA=36;
 706         {0x08065B, 37}, //TXVGA=37;
 707         {0x08066B, 38}, //TXVGA=38;
 708         {0x08067B, 39}, //TXVGA=39;
 709         {0x08068B, 40}, //TXVGA=40;
 710         {0x08069B, 41}, //TXVGA=41;
 711         {0x0806AB, 42}, //TXVGA=42;
 712         {0x0806BB, 43}, //TXVGA=43;
 713         {0x0806CB, 44}, //TXVGA=44;
 714         {0x0806DB, 45}, //TXVGA=45;
 715         {0x0806EB, 46}, //TXVGA=46;
 716         {0x0806FB, 47}, //TXVGA=47;
 717         {0x08070B, 48}, //TXVGA=48;
 718         {0x08071B, 49}, //TXVGA=49;
 719         {0x08072B, 50}, //TXVGA=50;
 720         {0x08073B, 51}, //TXVGA=51;
 721         {0x08074B, 52}, //TXVGA=52;
 722         {0x08075B, 53}, //TXVGA=53;
 723         {0x08076B, 54}, //TXVGA=54;
 724         {0x08077B, 55}, //TXVGA=55;
 725         {0x08078B, 56}, //TXVGA=56;
 726         {0x08079B, 57}, //TXVGA=57;
 727         {0x0807AB, 58}, //TXVGA=58;
 728         {0x0807BB, 59}, //TXVGA=59;
 729         {0x0807CB, 60}, //TXVGA=60;
 730         {0x0807DB, 61}, //TXVGA=61;
 731         {0x0807EB, 62}, //TXVGA=62;
 732         {0x0807FB, 63}, //TXVGA=63;
 733 };
 734 //--------------------------------
 735
 736
 737 //; W89RF242 RFIC SPI programming initial data
 738 //; Winbond WLAN 11g RFIC BB-SPI register -- version FA5976A rev 1.3b
 739 //; Update Date: Ocotber 3, 2005 by PP10 Hsiang-Te Ho
 740 //;
 741 //; Version 1.3b revision items: (Oct. 1, 2005 by HTHo) for FA5976A
 742 u32 w89rf242_rf_data[]     =
 743 {
 744     (0x00<<24)|0xF86100, // 20060721 0xF86100, //; 3E184; MODA  (0x00) -- Normal mode ; calibration off
 745     (0x01<<24)|0xEFFFC2, //; 3BFFF; MODB  (0x01) -- turn off RSSI, and other circuits are turned on
 746     (0x02<<24)|0x102504, //; 04094; FSET  (0x02) -- default 20MHz crystal ; Icmp=1.5mA
 747     (0x03<<24)|0x026286, //; 0098A; FCHN  (0x03) -- default CH7, 2442MHz
 748     (0x04<<24)|0x000208, // 20060612.1.a 0x0002C8, // 20050818 // 20050816 0x000388
 749                                                  //; 02008; FCAL  (0x04) -- XTAL Freq Trim=001000 (socket board#1); FA5976AYG_v1.3C
 750     (0x05<<24)|0x24C60A, // 20060612.1.a 0x24C58A, // 941003 0x24C48A, // 20050818.2 0x24848A, // 20050818 // 20050816 0x24C48A
 751                                                  //; 09316; GANA  (0x05) -- TX VGA default (TXVGA=0x18(12)) & TXGPK=110 ; FA5976A_1.3D
 752     (0x06<<24)|0x3432CC, // 941003 0x26C34C, // 20050818 0x06B40C
 753                                                  //; 0D0CB; GANB  (0x06) -- RXDC(DC offset) on; LNA=11; RXVGA=001011(11) ; RXFLSW=11(010001); RXGPK=00; RXGCF=00; -50dBm input
 754     (0x07<<24)|0x0C68CE, // 20050818.2 0x0C66CE, // 20050818 // 20050816 0x0C68CE
 755                                                  //; 031A3; FILT  (0x07) -- TX/RX filter with auto-tuning; TFLBW=011; RFLBW=100
 756     (0x08<<24)|0x100010, //; 04000; TCAL  (0x08) -- //for LO
 757     (0x09<<24)|0x004012, // 20060612.1.a 0x6E4012, // 0x004012,
 758                                                  //; 1B900; RCALA (0x09) -- FASTS=11; HPDE=01 (100nsec); SEHP=1 (select B0 pin=RXHP); RXHP=1 (Turn on RXHP function)(FA5976A_1.3C)
 759     (0x0A<<24)|0x704014, //; 1C100; RCALB (0x0A)
 760     (0x0B<<24)|0x18BDD6, // 941003 0x1805D6, // 20050818.2 0x1801D6, // 20050818 // 20050816 0x1805D6
 761                                                  //; 062F7; IQCAL (0x0B) -- Turn on LO phase tuner=0111 & RX-LO phase = 0111; FA5976A_1.3B (2005/09/29)
 762     (0x0C<<24)|0x575558, // 20050818.2 0x555558, // 20050818 // 20050816 0x575558
 763                                                  //; 15D55 ; IBSA  (0x0C) -- IFPre =11 ; TC5376A_v1.3A for corner
 764     (0x0D<<24)|0x55545A, // 20060612.1.a 0x55555A,
 765                                                  //; 15555 ; IBSB  (0x0D)
 766     (0x0E<<24)|0x5557DC, // 20060612.1.a 0x55555C, // 941003 0x5557DC,
 767                                                  //; 1555F ; IBSC  (0x0E) -- IRLNA & IRLNB (PTAT & Const current)=01/01; FA5976B_1.3F (2005/11/25)
 768         (0x10<<24)|0x000C20, // 941003 0x000020, // 20050818
 769                                                  //; 00030 ; TMODA (0x10) -- LNA_gain_step=0011 ; LNA=15/16dB
 770         (0x11<<24)|0x0C0022, // 941003 0x030022  // 20050818.2 0x030022  // 20050818 // 20050816 0x0C0022
 771                                                  //; 03000 ; TMODB (0x11) -- Turn ON RX-Q path Test Switch; To improve IQ path group delay (FA5976A_1.3C)
 772         (0x12<<24)|0x000024  // 20060612.1.a 0x001824  // 941003 add
 773                                                  //; TMODC (0x12) -- Turn OFF Tempearure sensor
 774 };
 775
 776 u32 w89rf242_channel_data_24[][2] =
 777 {
 778     {(0x03<<24)|0x025B06, (0x04<<24)|0x080408}, // channe1 01
 779     {(0x03<<24)|0x025C46, (0x04<<24)|0x080408}, // channe1 02
 780     {(0x03<<24)|0x025D86, (0x04<<24)|0x080408}, // channe1 03
 781     {(0x03<<24)|0x025EC6, (0x04<<24)|0x080408}, // channe1 04
 782     {(0x03<<24)|0x026006, (0x04<<24)|0x080408}, // channe1 05
 783     {(0x03<<24)|0x026146, (0x04<<24)|0x080408}, // channe1 06
 784     {(0x03<<24)|0x026286, (0x04<<24)|0x080408}, // channe1 07
 785     {(0x03<<24)|0x0263C6, (0x04<<24)|0x080408}, // channe1 08
 786     {(0x03<<24)|0x026506, (0x04<<24)|0x080408}, // channe1 09
 787     {(0x03<<24)|0x026646, (0x04<<24)|0x080408}, // channe1 10
 788     {(0x03<<24)|0x026786, (0x04<<24)|0x080408}, // channe1 11
 789     {(0x03<<24)|0x0268C6, (0x04<<24)|0x080408}, // channe1 12
 790     {(0x03<<24)|0x026A06, (0x04<<24)|0x080408}, // channe1 13
 791     {(0x03<<24)|0x026D06, (0x04<<24)|0x080408}  // channe1 14
 792 };
 793
 794 u32 w89rf242_power_data_24[] = {(0x05<<24)|0x24C48A, (0x05<<24)|0x24C48A, (0x05<<24)|0x24C48A};
 795
 796 // 20060315.6 Enlarge for new scale
 797 // 20060316.6 20060619.2.a add mapping array
 798 u32 w89rf242_txvga_old_mapping[][2] =
 799 {
 800         {0, 0} , // New <-> Old
 801         {1, 1} ,
 802         {2, 2} ,
 803         {3, 3} ,
 804         {4, 4} ,
 805         {6, 5} ,
 806         {8, 6 },
 807         {10, 7 },
 808         {12, 8 },
 809         {14, 9 },
 810         {16, 10},
 811         {18, 11},
 812         {20, 12},
 813         {22, 13},
 814         {24, 14},
 815         {26, 15},
 816         {28, 16},
 817         {30, 17},
 818         {32, 18},
 819         {34, 19},
 820
 821
 822 };
 823
 824 // 20060619.3 modify from Bruce's mail
 825 u32 w89rf242_txvga_data[][5] =
 826 {
 827         //low gain mode
 828         { (0x05<<24)|0x24C00A, 0, 0x00292315, 0x0800FEFF, 0x52523131 },//  ; min gain
 829         { (0x05<<24)|0x24C80A, 1, 0x00292315, 0x0800FEFF, 0x52523131 },
 830         { (0x05<<24)|0x24C04A, 2, 0x00292315, 0x0800FEFF, 0x52523131 },//  (default) +14dBm (ANT)
 831         { (0x05<<24)|0x24C84A, 3, 0x00292315, 0x0800FEFF, 0x52523131 },
 832
 833         //TXVGA=0x10
 834         { (0x05<<24)|0x24C40A, 4, 0x00292315, 0x0800FEFF, 0x60603838 },
 835         { (0x05<<24)|0x24C40A, 5, 0x00262114, 0x0700FEFF, 0x65653B3B },
 836
 837         //TXVGA=0x11
 838         { (0x05<<24)|0x24C44A, 6, 0x00241F13, 0x0700FFFF, 0x58583333 },
 839         { (0x05<<24)|0x24C44A, 7, 0x00292315, 0x0800FEFF, 0x5E5E3737 },
 840
 841         //TXVGA=0x12
 842         { (0x05<<24)|0x24C48A, 8, 0x00262114, 0x0700FEFF, 0x53533030 },
 843         { (0x05<<24)|0x24C48A, 9, 0x00241F13, 0x0700FFFF, 0x59593434 },
 844
 845         //TXVGA=0x13
 846         { (0x05<<24)|0x24C4CA, 10, 0x00292315, 0x0800FEFF, 0x52523030 },
 847         { (0x05<<24)|0x24C4CA, 11, 0x00262114, 0x0700FEFF, 0x56563232 },
 848
 849         //TXVGA=0x14
 850         { (0x05<<24)|0x24C50A, 12, 0x00292315, 0x0800FEFF, 0x54543131 },
 851         { (0x05<<24)|0x24C50A, 13, 0x00262114, 0x0700FEFF, 0x58583434 },
 852
 853         //TXVGA=0x15
 854         { (0x05<<24)|0x24C54A, 14, 0x00292315, 0x0800FEFF, 0x54543131 },
 855         { (0x05<<24)|0x24C54A, 15, 0x00262114, 0x0700FEFF, 0x59593434 },
 856
 857         //TXVGA=0x16
 858         { (0x05<<24)|0x24C58A, 16, 0x00292315, 0x0800FEFF, 0x55553131 },
 859         { (0x05<<24)|0x24C58A, 17, 0x00292315, 0x0800FEFF, 0x5B5B3535 },
 860
 861         //TXVGA=0x17
 862         { (0x05<<24)|0x24C5CA, 18, 0x00262114, 0x0700FEFF, 0x51512F2F },
 863         { (0x05<<24)|0x24C5CA, 19, 0x00241F13, 0x0700FFFF, 0x55553131 },
 864
 865         //TXVGA=0x18
 866         { (0x05<<24)|0x24C60A, 20, 0x00292315, 0x0800FEFF, 0x4F4F2E2E },
 867         { (0x05<<24)|0x24C60A, 21, 0x00262114, 0x0700FEFF, 0x53533030 },
 868
 869         //TXVGA=0x19
 870         { (0x05<<24)|0x24C64A, 22, 0x00292315, 0x0800FEFF, 0x4E4E2D2D },
 871         { (0x05<<24)|0x24C64A, 23, 0x00262114, 0x0700FEFF, 0x53533030 },
 872
 873         //TXVGA=0x1A
 874         { (0x05<<24)|0x24C68A, 24, 0x00292315, 0x0800FEFF, 0x50502E2E },
 875         { (0x05<<24)|0x24C68A, 25, 0x00262114, 0x0700FEFF, 0x55553131 },
 876
 877         //TXVGA=0x1B
 878         { (0x05<<24)|0x24C6CA, 26, 0x00262114, 0x0700FEFF, 0x53533030 },
 879         { (0x05<<24)|0x24C6CA, 27, 0x00292315, 0x0800FEFF, 0x5A5A3434 },
 880
 881         //TXVGA=0x1C
 882         { (0x05<<24)|0x24C70A, 28, 0x00292315, 0x0800FEFF, 0x55553131 },
 883         { (0x05<<24)|0x24C70A, 29, 0x00292315, 0x0800FEFF, 0x5D5D3636 },
 884
 885         //TXVGA=0x1D
 886         { (0x05<<24)|0x24C74A, 30, 0x00292315, 0x0800FEFF, 0x5F5F3737 },
 887         { (0x05<<24)|0x24C74A, 31, 0x00262114, 0x0700FEFF, 0x65653B3B },
 888
 889         //TXVGA=0x1E
 890         { (0x05<<24)|0x24C78A, 32, 0x00292315, 0x0800FEFF, 0x66663B3B },
 891         { (0x05<<24)|0x24C78A, 33, 0x00262114, 0x0700FEFF, 0x70704141 },
 892
 893         //TXVGA=0x1F
 894         { (0x05<<24)|0x24C7CA, 34, 0x00292315, 0x0800FEFF, 0x72724242 }
 895 };
 896
 897 ///////////////////////////////////////////////////////////////////////////////////////////////////
 898 ///////////////////////////////////////////////////////////////////////////////////////////////////
 899 ///////////////////////////////////////////////////////////////////////////////////////////////////
 900
 901
 902
 903 //=============================================================================================================
 904 //  Uxx_ReadEthernetAddress --
 905 //
 906 //  Routine Description:
 907 //    Reads in the Ethernet address from the IC.
 908 //
 909 //  Arguments:
 910 //    pHwData        - The pHwData structure
 911 //
 912 //  Return Value:
 913 //
 914 //    The address is stored in EthernetIDAddr.
 915 //=============================================================================================================
 916 void
 917 Uxx_ReadEthernetAddress(  phw_data_t pHwData )
 918 {
 919         u32     ltmp;
 920
 921         // Reading Ethernet address from EEPROM and set into hardware due to MAC address maybe change.
 922         // Only unplug and plug again can make hardware read EEPROM again. 20060727
 923         Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08000000 ); // Start EEPROM access + Read + address(0x0d)
 924         Wb35Reg_ReadSync( pHwData, 0x03b4, &ltmp );
 925         *(PUSHORT)pHwData->PermanentMacAddress = cpu_to_le16((u16)ltmp); //20060926 anson's endian
 926         Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08010000 ); // Start EEPROM access + Read + address(0x0d)
 927         Wb35Reg_ReadSync( pHwData, 0x03b4, &ltmp );
 928         *(PUSHORT)(pHwData->PermanentMacAddress + 2) = cpu_to_le16((u16)ltmp); //20060926 anson's endian
 929         Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08020000 ); // Start EEPROM access + Read + address(0x0d)
 930         Wb35Reg_ReadSync( pHwData, 0x03b4, &ltmp );
 931         *(PUSHORT)(pHwData->PermanentMacAddress + 4) = cpu_to_le16((u16)ltmp); //20060926 anson's endian
 932         *(PUSHORT)(pHwData->PermanentMacAddress + 6) = 0;
 933         Wb35Reg_WriteSync( pHwData, 0x03e8, cpu_to_le32(*(PULONG)pHwData->PermanentMacAddress) ); //20060926 anson's endian
 934         Wb35Reg_WriteSync( pHwData, 0x03ec, cpu_to_le32(*(PULONG)(pHwData->PermanentMacAddress+4)) ); //20060926 anson's endian
 935 }
 936
 937
 938 //===============================================================================================================
 939 //  CardGetMulticastBit --
 940 //  Description:
 941 //    For a given multicast address, returns the byte and bit in the card multicast registers that it hashes to.
 942 //    Calls CardComputeCrc() to determine the CRC value.
 943 //  Arguments:
 944 //    Address - the address
 945 //    Byte - the byte that it hashes to
 946 //    Value - will have a 1 in the relevant bit
 947 //  Return Value:
 948 //    None.
 949 //==============================================================================================================
 950 void CardGetMulticastBit(   u8 Address[ETH_LENGTH_OF_ADDRESS],
 951                                                    u8 *Byte,  u8 *Value )
 952 {
 953     u32 Crc;
 954     u32 BitNumber;
 955
 956     // First compute the CRC.
 957     Crc = CardComputeCrc(Address, ETH_LENGTH_OF_ADDRESS);
 958
 959         // The computed CRC is bit0~31 from left to right
 960         //At first we should do right shift 25bits, and read 7bits by using '&', 2^7=128
 961         BitNumber = (u32) ((Crc >> 26) & 0x3f);
 962
 963         *Byte  = (u8) (BitNumber >> 3);// 900514 original (BitNumber / 8)
 964         *Value = (u8) ((u8)1 << (BitNumber % 8));
 965 }
 966
 967 void Uxx_power_on_procedure(  phw_data_t pHwData )
 968 {
 969         u32     ltmp, loop;
 970
 971         if( pHwData->phy_type <= RF_MAXIM_V1 )
 972                 Wb35Reg_WriteSync( pHwData, 0x03d4, 0xffffff38 );
 973         else
 974         {
 975                 Wb35Reg_WriteSync( pHwData, 0x03f4, 0xFF5807FF );// 20060721 For NEW IC 0xFF5807FF
 976
 977                 // 20060511.1 Fix the following 4 steps for Rx of RF 2230 initial fail
 978                 Wb35Reg_WriteSync( pHwData, 0x03d4, 0x80 );// regulator on only
 979                 OS_SLEEP(10000); // Modify 20051221.1.b
 980                 Wb35Reg_WriteSync( pHwData, 0x03d4, 0xb8 );// REG_ON RF_RSTN on, and
 981                 OS_SLEEP(10000); // Modify 20051221.1.b
 982
 983                 ltmp = 0x4968;
 984                 if( (pHwData->phy_type == RF_WB_242) ||
 985                         (RF_WB_242_1 == pHwData->phy_type) ) // 20060619.5 Add
 986                         ltmp = 0x4468;
 987                 Wb35Reg_WriteSync( pHwData, 0x03d0, ltmp );
 988
 989                 Wb35Reg_WriteSync( pHwData, 0x03d4, 0xa0 );// PLL_PD REF_PD set to 0
 990
 991                 OS_SLEEP(20000); // Modify 20051221.1.b
 992                 Wb35Reg_ReadSync( pHwData, 0x03d0, &ltmp );
 993                 loop = 500; // Wait for 5 second 20061101
 994                 while( !(ltmp & 0x20) && loop-- )
 995                 {
 996                         OS_SLEEP(10000); // Modify 20051221.1.b
 997                         if( !Wb35Reg_ReadSync( pHwData, 0x03d0, &ltmp ) )
 998                                 break;
 999                 }
1000
1001                 Wb35Reg_WriteSync( pHwData, 0x03d4, 0xe0 );// MLK_EN
1002         }
1003
1004         Wb35Reg_WriteSync( pHwData, 0x03b0, 1 );// Reset hardware first
1005         OS_SLEEP(10000); // Add this 20051221.1.b
1006
1007         // Set burst write delay
1008         Wb35Reg_WriteSync( pHwData, 0x03f8, 0x7ff );
1009 }
1010
1011 void Set_ChanIndep_RfData_al7230_24(  phw_data_t pHwData, u32 *pltmp ,char number)
1012 {
1013         u8      i;
1014
1015         for( i=0; i<number; i++ )
1016         {
1017                 pHwData->phy_para[i] = al7230_rf_data_24[i];
1018                 pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_rf_data_24[i]&0xffffff);
1019         }
1020 }
1021
1022 void Set_ChanIndep_RfData_al7230_50(  phw_data_t pHwData, u32 *pltmp, char number)
1023 {
1024         u8      i;
1025
1026         for( i=0; i<number; i++ )
1027         {
1028                 pHwData->phy_para[i] = al7230_rf_data_50[i];
1029                 pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_rf_data_50[i]&0xffffff);
1030         }
1031 }
1032
1033
1034 //=============================================================================================================
1035 // RFSynthesizer_initial --
1036 //=============================================================================================================
1037 void
1038 RFSynthesizer_initial(phw_data_t pHwData)
1039 {
1040         u32     altmp[32];
1041         PULONG  pltmp = altmp;
1042         u32     ltmp;
1043         u8      number=0x00; // The number of register vale
1044         u8      i;
1045
1046         //
1047         // bit[31]      SPI Enable.
1048         //              1=perform synthesizer program operation. This bit will
1049         //              cleared automatically after the operation is completed.
1050         // bit[30]      SPI R/W Control
1051         //              0=write,    1=read
1052         // bit[29:24]   SPI Data Format Length
1053         // bit[17:4 ]   RF Data bits.
1054         // bit[3 :0 ]   RF address.
1055         switch( pHwData->phy_type )
1056         {
1057         case RF_MAXIM_2825:
1058         case RF_MAXIM_V1: // 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331)
1059                 number = sizeof(max2825_rf_data)/sizeof(max2825_rf_data[0]);
1060                 for( i=0; i<number; i++ )
1061                 {
1062                         pHwData->phy_para[i] = max2825_rf_data[i];// Backup Rf parameter
1063                         pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2825_rf_data[i], 18);
1064                 }
1065                 break;
1066
1067         case RF_MAXIM_2827:
1068                 number = sizeof(max2827_rf_data)/sizeof(max2827_rf_data[0]);
1069                 for( i=0; i<number; i++ )
1070                 {
1071                         pHwData->phy_para[i] = max2827_rf_data[i];
1072                         pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2827_rf_data[i], 18);
1073                 }
1074                 break;
1075
1076         case RF_MAXIM_2828:
1077                 number = sizeof(max2828_rf_data)/sizeof(max2828_rf_data[0]);
1078                 for( i=0; i<number; i++ )
1079                 {
1080                         pHwData->phy_para[i] = max2828_rf_data[i];
1081                         pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2828_rf_data[i], 18);
1082                 }
1083                 break;
1084
1085         case RF_MAXIM_2829:
1086                 number = sizeof(max2829_rf_data)/sizeof(max2829_rf_data[0]);
1087                 for( i=0; i<number; i++ )
1088                 {
1089                         pHwData->phy_para[i] = max2829_rf_data[i];
1090                         pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2829_rf_data[i], 18);
1091                 }
1092                 break;
1093
1094         case RF_AIROHA_2230:
1095                 number = sizeof(al2230_rf_data)/sizeof(al2230_rf_data[0]);
1096                 for( i=0; i<number; i++ )
1097                 {
1098                         pHwData->phy_para[i] = al2230_rf_data[i];
1099                         pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( al2230_rf_data[i], 20);
1100                 }
1101                 break;
1102
1103         case RF_AIROHA_2230S:
1104                 number = sizeof(al2230s_rf_data)/sizeof(al2230s_rf_data[0]);
1105                 for( i=0; i<number; i++ )
1106                 {
1107                         pHwData->phy_para[i] = al2230s_rf_data[i];
1108                         pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( al2230s_rf_data[i], 20);
1109                 }
1110                 break;
1111
1112         case RF_AIROHA_7230:
1113
1114                 //Start to fill RF parameters, PLL_ON should be pulled low.
1115                 Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000000 );
1116 #ifdef _PE_STATE_DUMP_
1117                 WBDEBUG(("* PLL_ON    low\n"));
1118 #endif
1119
1120                 number = sizeof(al7230_rf_data_24)/sizeof(al7230_rf_data_24[0]);
1121                 Set_ChanIndep_RfData_al7230_24(pHwData, pltmp, number);
1122                 break;
1123
1124         case RF_WB_242:
1125         case RF_WB_242_1: // 20060619.5 Add
1126                 number = sizeof(w89rf242_rf_data)/sizeof(w89rf242_rf_data[0]);
1127                 for( i=0; i<number; i++ )
1128                 {
1129                         ltmp = w89rf242_rf_data[i];
1130                         if( i == 4 ) // Update the VCO trim from EEPROM
1131                         {
1132                                 ltmp &= ~0xff0; // Mask bit4 ~bit11
1133                                 ltmp |= pHwData->VCO_trim<<4;
1134                         }
1135
1136                         pHwData->phy_para[i] = ltmp;
1137                         pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( ltmp, 24);
1138                 }
1139                 break;
1140         }
1141
1142         pHwData->phy_number = number;
1143
1144          // The 16 is the maximum capability of hardware. Here use 12
1145         if( number > 12 ) {
1146                 //Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 12, NO_INCREMENT );
1147                 for( i=0; i<12; i++ ) // For Al2230
1148                         Wb35Reg_WriteSync( pHwData, 0x0864, pltmp[i] );
1149
1150                 pltmp += 12;
1151                 number -= 12;
1152         }
1153
1154         // Write to register. number must less and equal than 16
1155         for( i=0; i<number; i++ )
1156                 Wb35Reg_WriteSync( pHwData, 0x864, pltmp[i] );
1157
1158         // 20060630.1 Calibration only 1 time
1159         if( pHwData->CalOneTime )
1160                 return;
1161         pHwData->CalOneTime = 1;
1162
1163         switch( pHwData->phy_type )
1164         {
1165                 case RF_AIROHA_2230:
1166
1167                         // 20060511.1 --- Modifying the follow step for Rx issue-----------------
1168                         ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x07<<20)|0xE168E, 20);
1169                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1170                         OS_SLEEP(10000);
1171                         ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( al2230_rf_data[7], 20);
1172                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1173                         OS_SLEEP(10000);
1174
1175                 case RF_AIROHA_2230S: // 20060420 Add this
1176
1177                         // 20060511.1 --- Modifying the follow step for Rx issue-----------------
1178                         Wb35Reg_WriteSync( pHwData, 0x03d4, 0x80 );// regulator on only
1179                         OS_SLEEP(10000); // Modify 20051221.1.b
1180
1181                         Wb35Reg_WriteSync( pHwData, 0x03d4, 0xa0 );// PLL_PD REF_PD set to 0
1182                         OS_SLEEP(10000); // Modify 20051221.1.b
1183
1184                         Wb35Reg_WriteSync( pHwData, 0x03d4, 0xe0 );// MLK_EN
1185                         Wb35Reg_WriteSync( pHwData, 0x03b0, 1 );// Reset hardware first
1186                         OS_SLEEP(10000); // Add this 20051221.1.b
1187                         //------------------------------------------------------------------------
1188
1189                         // The follow code doesn't use the burst-write mode
1190                         //phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01A0); //Raise Initial Setting
1191                         ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01A0, 20);
1192                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1193
1194                         ltmp = pHwData->Wb35Reg.BB5C & 0xfffff000;
1195                         Wb35Reg_WriteSync( pHwData, 0x105c, ltmp );
1196                         pHwData->Wb35Reg.BB50 |= 0x13;//(MASK_IQCAL_MODE|MASK_CALIB_START);//20060315.1 modify
1197                 Wb35Reg_WriteSync( pHwData, 0x1050, pHwData->Wb35Reg.BB50);
1198                         OS_SLEEP(5000);
1199
1200                         //phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01B0); //Activate Filter Cal.
1201                         ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01B0, 20);
1202                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1203                         OS_SLEEP(5000);
1204
1205                         //phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01e0); //Activate TX DCC
1206                         ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01E0, 20);
1207                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1208                         OS_SLEEP(5000);
1209
1210                         //phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01A0); //Resotre Initial Setting
1211                         ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01A0, 20);
1212                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1213
1214 //                      //Force TXI(Q)P(N) to normal control
1215                         Wb35Reg_WriteSync( pHwData, 0x105c, pHwData->Wb35Reg.BB5C );
1216                         pHwData->Wb35Reg.BB50 &= ~0x13;//(MASK_IQCAL_MODE|MASK_CALIB_START);
1217                 Wb35Reg_WriteSync( pHwData, 0x1050, pHwData->Wb35Reg.BB50);
1218                         break;
1219
1220                 case RF_AIROHA_7230:
1221
1222                         //RF parameters have filled completely, PLL_ON should be
1223                         //pulled high
1224                         Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
1225                         #ifdef _PE_STATE_DUMP_
1226                         WBDEBUG(("* PLL_ON    high\n"));
1227                         #endif
1228
1229                         //2.4GHz
1230                         //ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x1ABA8F;
1231                         //Wb35Reg_WriteSync pHwData, 0x0864, ltmp );
1232                         //OS_SLEEP(1000); // Sleep 1 ms
1233                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
1234                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1235                         OS_SLEEP(5000);
1236                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F;
1237                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1238                         OS_SLEEP(5000);
1239                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x1ABA8F;
1240                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1241                         OS_SLEEP(5000);
1242
1243                         //5GHz
1244                         Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000000 );
1245                         #ifdef _PE_STATE_DUMP_
1246                         WBDEBUG(("* PLL_ON    low\n"));
1247                         #endif
1248
1249                         number = sizeof(al7230_rf_data_50)/sizeof(al7230_rf_data_50[0]);
1250                         Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number);
1251                         // Write to register. number must less and equal than 16
1252                         for( i=0; i<number; i++ )
1253                                 Wb35Reg_WriteSync( pHwData, 0x0864, pltmp[i] );
1254                         OS_SLEEP(5000);
1255
1256                         Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
1257                         #ifdef _PE_STATE_DUMP_
1258                         WBDEBUG(("* PLL_ON    high\n"));
1259                         #endif
1260
1261                         //ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x12BACF;
1262                         //Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1263                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
1264                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1265                         OS_SLEEP(5000);
1266                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F;
1267                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1268                         OS_SLEEP(5000);
1269                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x12BACF;
1270                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1271                         OS_SLEEP(5000);
1272
1273                         //Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
1274                         //WBDEBUG(("* PLL_ON    high\n"));
1275                         break;
1276
1277                 case RF_WB_242:
1278                 case RF_WB_242_1: // 20060619.5 Add
1279
1280                         //
1281                         // ; Version 1.3B revision items: for FA5976A , October 3, 2005 by HTHo
1282                         //
1283                         ltmp = pHwData->Wb35Reg.BB5C & 0xfffff000;
1284                         Wb35Reg_WriteSync( pHwData, 0x105c, ltmp );
1285                         Wb35Reg_WriteSync( pHwData, 0x1058, 0 );
1286                         pHwData->Wb35Reg.BB50 |= 0x3;//(MASK_IQCAL_MODE|MASK_CALIB_START);//20060630
1287                 Wb35Reg_WriteSync( pHwData, 0x1050, pHwData->Wb35Reg.BB50);
1288
1289                         //----- Calibration (1). VCO frequency calibration
1290                         //Calibration (1a.0). Synthesizer reset (HTHo corrected 2005/05/10)
1291                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x0F<<24) | 0x00101E, 24);
1292                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1293                         OS_SLEEP( 5000 ); // Sleep 5ms
1294                         //Calibration (1a). VCO frequency calibration mode ; waiting 2msec VCO calibration time
1295                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFE69c0, 24);
1296                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1297                         OS_SLEEP( 2000 ); // Sleep 2ms
1298
1299                         //----- Calibration (2). TX baseband Gm-C filter auto-tuning
1300                         //Calibration (2a). turn off ENCAL signal
1301                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xF8EBC0, 24);
1302                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1303                         //Calibration (2b.0). TX filter auto-tuning BW: TFLBW=101 (TC5376A default)
1304                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x07<<24) | 0x0C68CE, 24);
1305                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1306                         //Calibration (2b). send TX reset signal (HTHo corrected May 10, 2005)
1307                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x0F<<24) | 0x00201E, 24);
1308                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1309                         //Calibration (2c). turn-on TX Gm-C filter auto-tuning
1310                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFCEBC0, 24);
1311                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1312                         OS_SLEEP( 150 ); // Sleep 150 us
1313                         //turn off ENCAL signal
1314                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xF8EBC0, 24);
1315                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1316
1317                         //----- Calibration (3). RX baseband Gm-C filter auto-tuning
1318                         //Calibration (3a). turn off ENCAL signal
1319                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
1320                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1321                         //Calibration (3b.0). RX filter auto-tuning BW: RFLBW=100 (TC5376A+corner default; July 26, 2005)
1322                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x07<<24) | 0x0C68CE, 24);
1323                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1324                         //Calibration (3b). send RX reset signal (HTHo corrected May 10, 2005)
1325                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x0F<<24) | 0x00401E, 24);
1326                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1327                         //Calibration (3c). turn-on RX Gm-C filter auto-tuning
1328                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFEEDC0, 24);
1329                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1330                         OS_SLEEP( 150 ); // Sleep 150 us
1331                         //Calibration (3e). turn off ENCAL signal
1332                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
1333                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1334
1335                         //----- Calibration (4). TX LO leakage calibration
1336                         //Calibration (4a). TX LO leakage calibration
1337                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFD6BC0, 24);
1338                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1339                         OS_SLEEP( 150 ); // Sleep 150 us
1340
1341                         //----- Calibration (5). RX DC offset calibration
1342                         //Calibration (5a). turn off ENCAL signal and set to RX SW DC caliration mode
1343                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
1344                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1345                         //Calibration (5b). turn off AGC servo-loop & RSSI
1346                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x01<<24) | 0xEBFFC2, 24);
1347                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1348
1349                         //; for LNA=11 --------
1350                         //Calibration (5c-h). RX DC offset current bias ON; & LNA=11; RXVGA=111111
1351                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x06<<24) | 0x343FCC, 24);
1352                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1353                         //Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
1354                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
1355                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1356                         OS_SLEEP(2000); // Sleep 2ms
1357                         //Calibration (5f). turn off ENCAL signal
1358                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
1359                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1360
1361                         //; for LNA=10 --------
1362                         //Calibration (5c-m). RX DC offset current bias ON; & LNA=10; RXVGA=111111
1363                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x06<<24) | 0x342FCC, 24);
1364                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1365                         //Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
1366                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
1367                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1368                         OS_SLEEP(2000); // Sleep 2ms
1369                         //Calibration (5f). turn off ENCAL signal
1370                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
1371                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1372
1373                         //; for LNA=01 --------
1374                         //Calibration (5c-m). RX DC offset current bias ON; & LNA=01; RXVGA=111111
1375                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x06<<24) | 0x341FCC, 24);
1376                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1377                         //Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
1378                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
1379                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1380                         OS_SLEEP(2000); // Sleep 2ms
1381                         //Calibration (5f). turn off ENCAL signal
1382                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
1383                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1384
1385                         //; for LNA=00 --------
1386                         //Calibration (5c-l). RX DC offset current bias ON; & LNA=00; RXVGA=111111
1387                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x06<<24) | 0x340FCC, 24);
1388                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1389                         //Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
1390                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
1391                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1392                         OS_SLEEP(2000); // Sleep 2ms
1393                         //Calibration (5f). turn off ENCAL signal
1394                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
1395                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1396                         //Calibration (5g). turn on AGC servo-loop
1397                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x01<<24) | 0xEFFFC2, 24);
1398                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1399
1400                         //; ----- Calibration (7). Switch RF chip to normal mode
1401                         //0x00 0xF86100 ; 3E184   ; Switch RF chip to normal mode
1402 //                      OS_SLEEP(10000); // @@ 20060721
1403                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xF86100, 24);
1404                         Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
1405                         OS_SLEEP(5000); // Sleep 5 ms
1406
1407 //                      //write back
1408 //                      Wb35Reg_WriteSync( pHwData, 0x105c, pHwData->Wb35Reg.BB5C );
1409 //                      pHwData->Wb35Reg.BB50 &= ~0x13;//(MASK_IQCAL_MODE|MASK_CALIB_START); // 20060315.1 fix
1410 //              Wb35Reg_WriteSync( pHwData, 0x1050, pHwData->Wb35Reg.BB50);
1411 //                      OS_SLEEP(1000); // Sleep 1 ms
1412                         break;
1413         }
1414 }
1415
1416 void BBProcessor_AL7230_2400(  phw_data_t pHwData)
1417 {
1418         PWB35REG        pWb35Reg = &pHwData->Wb35Reg;
1419         u32     pltmp[12];
1420
1421         pltmp[0] = 0x16A8337A; // 0x16a5215f; // 0x1000 AGC_Ctrl1
1422         pltmp[1] = 0x9AFF9AA6; // 0x9aff9ca6; // 0x1004 AGC_Ctrl2
1423         pltmp[2] = 0x55D00A04; // 0x55d00a04; // 0x1008 AGC_Ctrl3
1424         pltmp[3] = 0xFFF72031; // 0xFfFf2138; // 0x100c AGC_Ctrl4
1425         pWb35Reg->BB0C = 0xFFF72031;
1426         pltmp[4] = 0x0FacDCC5; // 0x1010 AGC_Ctrl5 // 20050927 0x0FacDCB7
1427         pltmp[5] = 0x00CAA333; // 0x00eaa333; // 0x1014 AGC_Ctrl6
1428         pltmp[6] = 0xF2211111; // 0x11111111; // 0x1018 AGC_Ctrl7
1429         pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
1430         pltmp[8] = 0x06443440; // 0x1020 AGC_Ctrl9
1431         pltmp[9] = 0xA8002A79; // 0xa9002A79; // 0x1024 AGC_Ctrl10
1432         pltmp[10] = 0x40000528; // 20050927 0x40000228
1433         pltmp[11] = 0x232D7F30; // 0x23457f30;// 0x102c A_ACQ_Ctrl
1434         pWb35Reg->BB2C = 0x232D7F30;
1435         Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
1436
1437         pltmp[0] = 0x00002c54; // 0x1030 B_ACQ_Ctrl
1438         pWb35Reg->BB30 = 0x00002c54;
1439         pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
1440         pltmp[2] = 0x5B2C8769; // 0x1038 B_TXRX_Ctrl
1441         pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
1442         pWb35Reg->BB3C = 0x00000000;
1443         pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
1444         pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
1445         pltmp[6] = 0x00332C1B; // 0x00453B24; // 0x1048 11b TX RC filter
1446         pltmp[7] = 0x0A00FEFF; // 0x0E00FEFF; // 0x104c 11b TX RC filter
1447         pltmp[8] = 0x2B106208; // 0x1050 MODE_Ctrl
1448         pWb35Reg->BB50 = 0x2B106208;
1449         pltmp[9] = 0; // 0x1054
1450         pWb35Reg->BB54 = 0x00000000;
1451         pltmp[10] = 0x52524242; // 0x64645252; // 0x1058 IQ_Alpha
1452         pWb35Reg->BB58 = 0x52524242;
1453         pltmp[11] = 0xAA0AC000; // 0x105c DC_Cancel
1454         Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
1455
1456 }
1457
1458 void BBProcessor_AL7230_5000(  phw_data_t pHwData)
1459 {
1460         PWB35REG        pWb35Reg = &pHwData->Wb35Reg;
1461         u32     pltmp[12];
1462
1463         pltmp[0] = 0x16AA6678; // 0x1000 AGC_Ctrl1
1464         pltmp[1] = 0x9AFFA0B2; // 0x1004 AGC_Ctrl2
1465         pltmp[2] = 0x55D00A04; // 0x1008 AGC_Ctrl3
1466         pltmp[3] = 0xEFFF233E; // 0x100c AGC_Ctrl4
1467         pWb35Reg->BB0C = 0xEFFF233E;
1468         pltmp[4] = 0x0FacDCC5; // 0x1010 AGC_Ctrl5 // 20050927 0x0FacDCB7
1469         pltmp[5] = 0x00CAA333; // 0x1014 AGC_Ctrl6
1470         pltmp[6] = 0xF2432111; // 0x1018 AGC_Ctrl7
1471         pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
1472         pltmp[8] = 0x05C43440; // 0x1020 AGC_Ctrl9
1473         pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
1474         pltmp[10] = 0x40000528; // 20050927 0x40000228
1475         pltmp[11] = 0x232FDF30;// 0x102c A_ACQ_Ctrl
1476         pWb35Reg->BB2C = 0x232FDF30;
1477         Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
1478
1479         pltmp[0] = 0x80002C7C; // 0x1030 B_ACQ_Ctrl
1480         pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
1481         pltmp[2] = 0x5B2C8769; // 0x1038 B_TXRX_Ctrl
1482         pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
1483         pWb35Reg->BB3C = 0x00000000;
1484         pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
1485         pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
1486         pltmp[6] = 0x00332C1B; // 0x1048 11b TX RC filter
1487         pltmp[7] = 0x0A00FEFF; // 0x104c 11b TX RC filter
1488         pltmp[8] = 0x2B107208; // 0x1050 MODE_Ctrl
1489         pWb35Reg->BB50 = 0x2B107208;
1490         pltmp[9] = 0; // 0x1054
1491         pWb35Reg->BB54 = 0x00000000;
1492         pltmp[10] = 0x52524242; // 0x1058 IQ_Alpha
1493         pWb35Reg->BB58 = 0x52524242;
1494         pltmp[11] = 0xAA0AC000; // 0x105c DC_Cancel
1495         Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
1496
1497 }
1498
1499 //=============================================================================================================
1500 //  BBProcessorPowerupInit --
1501 //
1502 //  Description:
1503 //    Initialize the Baseband processor.
1504 //
1505 //  Arguments:
1506 //    pHwData    - Handle of the USB Device.
1507 //
1508 //  Return values:
1509 //    None.
1510 //=============================================================================================================
1511 void
1512 BBProcessor_initial(  phw_data_t pHwData )
1513 {
1514         PWB35REG        pWb35Reg = &pHwData->Wb35Reg;
1515         u32     i, pltmp[12];
1516
1517     switch( pHwData->phy_type )
1518     {
1519                 case RF_MAXIM_V1: // Initializng the Winbond 2nd BB(with Phy board (v1) + Maxim 331)
1520
1521                         pltmp[0] = 0x16F47E77; // 0x1000 AGC_Ctrl1
1522                         pltmp[1] = 0x9AFFAEA4; // 0x1004 AGC_Ctrl2
1523                         pltmp[2] = 0x55D00A04; // 0x1008 AGC_Ctrl3
1524                         pltmp[3] = 0xEFFF1A34; // 0x100c AGC_Ctrl4
1525                         pWb35Reg->BB0C = 0xEFFF1A34;
1526                         pltmp[4] = 0x0FABE0B7; // 0x1010 AGC_Ctrl5
1527                         pltmp[5] = 0x00CAA332; // 0x1014 AGC_Ctrl6
1528                         pltmp[6] = 0xF6632111; // 0x1018 AGC_Ctrl7
1529                         pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
1530                         pltmp[8] = 0x04CC3640; // 0x1020 AGC_Ctrl9
1531                         pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
1532                         pltmp[10] = (pHwData->phy_type==3) ? 0x40000a28 : 0x40000228; // 0x1028 MAXIM_331(b31=0) + WBRF_V1(b11=1) : MAXIM_331(b31=0) + WBRF_V2(b11=0)
1533                         pltmp[11] = 0x232FDF30; // 0x102c A_ACQ_Ctrl
1534                         pWb35Reg->BB2C = 0x232FDF30; //Modify for 33's 1.0.95.xxx version, antenna 1
1535                         Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
1536
1537                         pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
1538                         pWb35Reg->BB30 = 0x00002C54;
1539                         pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
1540                         pltmp[2] = 0x5B6C8769; // 0x1038 B_TXRX_Ctrl
1541                         pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
1542                         pWb35Reg->BB3C = 0x00000000;
1543                         pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
1544                         pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
1545                         pltmp[6] = 0x00453B24; // 0x1048 11b TX RC filter
1546                         pltmp[7] = 0x0E00FEFF; // 0x104c 11b TX RC filter
1547                         pltmp[8] = 0x27106208; // 0x1050 MODE_Ctrl
1548                         pWb35Reg->BB50 = 0x27106208;
1549                         pltmp[9] = 0; // 0x1054
1550                         pWb35Reg->BB54 = 0x00000000;
1551                         pltmp[10] = 0x64646464; // 0x1058 IQ_Alpha
1552                         pWb35Reg->BB58 = 0x64646464;
1553                         pltmp[11] = 0xAA0AC000; // 0x105c DC_Cancel
1554                         Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
1555
1556                         Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
1557                         break;
1558
1559                 //------------------------------------------------------------------
1560                 //[20040722 WK]
1561                 //Only for baseband version 2
1562 //              case RF_MAXIM_317:
1563                 case RF_MAXIM_2825:
1564                 case RF_MAXIM_2827:
1565                 case RF_MAXIM_2828:
1566
1567                         pltmp[0] = 0x16b47e77; // 0x1000 AGC_Ctrl1
1568                         pltmp[1] = 0x9affaea4; // 0x1004 AGC_Ctrl2
1569                         pltmp[2] = 0x55d00a04; // 0x1008 AGC_Ctrl3
1570                         pltmp[3] = 0xefff1a34; // 0x100c AGC_Ctrl4
1571                         pWb35Reg->BB0C = 0xefff1a34;
1572                         pltmp[4] = 0x0fabe0b7; // 0x1010 AGC_Ctrl5
1573                         pltmp[5] = 0x00caa332; // 0x1014 AGC_Ctrl6
1574                         pltmp[6] = 0xf6632111; // 0x1018 AGC_Ctrl7
1575                         pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
1576                         pltmp[8] = 0x04CC3640; // 0x1020 AGC_Ctrl9
1577                         pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
1578                         pltmp[10] = 0x40000528; // 0x40000128; Modify for 33's 1.0.95
1579                         pltmp[11] = 0x232fdf30; // 0x102c A_ACQ_Ctrl
1580                         pWb35Reg->BB2C = 0x232fdf30; //Modify for 33's 1.0.95.xxx version, antenna 1
1581                         Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
1582
1583                         pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
1584                         pWb35Reg->BB30 = 0x00002C54;
1585                         pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
1586                         pltmp[2] = 0x5B6C8769; // 0x1038 B_TXRX_Ctrl
1587                         pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
1588                         pWb35Reg->BB3C = 0x00000000;
1589                         pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
1590                         pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
1591                         pltmp[6] = 0x00453B24; // 0x1048 11b TX RC filter
1592                         pltmp[7] = 0x0D00FDFF; // 0x104c 11b TX RC filter
1593                         pltmp[8] = 0x27106208; // 0x1050 MODE_Ctrl
1594                         pWb35Reg->BB50 = 0x27106208;
1595                         pltmp[9] = 0; // 0x1054
1596                         pWb35Reg->BB54 = 0x00000000;
1597                         pltmp[10] = 0x64646464; // 0x1058 IQ_Alpha
1598                         pWb35Reg->BB58 = 0x64646464;
1599                         pltmp[11] = 0xAA28C000; // 0x105c DC_Cancel
1600                         Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
1601
1602                         Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
1603                         break;
1604
1605                 case RF_MAXIM_2829:
1606
1607                         pltmp[0] = 0x16b47e77; // 0x1000 AGC_Ctrl1
1608                         pltmp[1] = 0x9affaea4; // 0x1004 AGC_Ctrl2
1609                         pltmp[2] = 0x55d00a04; // 0x1008 AGC_Ctrl3
1610                         pltmp[3] = 0xf4ff1632; // 0xefff1a34; // 0x100c AGC_Ctrl4 Modify for 33's 1.0.95
1611                         pWb35Reg->BB0C = 0xf4ff1632; // 0xefff1a34; Modify for 33's 1.0.95
1612                         pltmp[4] = 0x0fabe0b7; // 0x1010 AGC_Ctrl5
1613                         pltmp[5] = 0x00caa332; // 0x1014 AGC_Ctrl6
1614                         pltmp[6] = 0xf8632112; // 0xf6632111; // 0x1018 AGC_Ctrl7 Modify for 33's 1.0.95
1615                         pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
1616                         pltmp[8] = 0x04CC3640; // 0x1020 AGC_Ctrl9
1617                         pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
1618                         pltmp[10] = 0x40000528; // 0x40000128; modify for 33's 1.0.95
1619                         pltmp[11] = 0x232fdf30; // 0x102c A_ACQ_Ctrl
1620                         pWb35Reg->BB2C = 0x232fdf30; //Modify for 33's 1.0.95.xxx version, antenna 1
1621                         Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
1622
1623                         pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
1624                         pWb35Reg->BB30 = 0x00002C54;
1625                         pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
1626                         pltmp[2] = 0x5b2c8769; // 0x5B6C8769; // 0x1038 B_TXRX_Ctrl Modify for 33's 1.0.95
1627                         pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
1628                         pWb35Reg->BB3C = 0x00000000;
1629                         pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
1630                         pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
1631                         pltmp[6] = 0x002c2617; // 0x00453B24; // 0x1048 11b TX RC filter Modify for 33's 1.0.95
1632                         pltmp[7] = 0x0800feff; // 0x0D00FDFF; // 0x104c 11b TX RC filter Modify for 33's 1.0.95
1633                         pltmp[8] = 0x27106208; // 0x1050 MODE_Ctrl
1634                         pWb35Reg->BB50 = 0x27106208;
1635                         pltmp[9] = 0; // 0x1054
1636                         pWb35Reg->BB54 = 0x00000000;
1637                         pltmp[10] = 0x64644a4a; // 0x64646464; // 0x1058 IQ_Alpha Modify for 33's 1.0.95
1638                         pWb35Reg->BB58 = 0x64646464;
1639                         pltmp[11] = 0xAA28C000; // 0x105c DC_Cancel
1640                         Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
1641
1642                         Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
1643                         break;
1644
1645                 case RF_AIROHA_2230:
1646
1647                         pltmp[0] = 0X16764A77; // 0x1000 AGC_Ctrl1              //0x16765A77
1648                         pltmp[1] = 0x9affafb2; // 0x1004 AGC_Ctrl2
1649                         pltmp[2] = 0x55d00a04; // 0x1008 AGC_Ctrl3
1650                         pltmp[3] = 0xFFFd203c; // 0xFFFb203a; // 0x100c AGC_Ctrl4 Modify for 33's 1.0.95.xxx version
1651                         pWb35Reg->BB0C = 0xFFFd203c;
1652                         pltmp[4] = 0X0FBFDCc5; // 0X0FBFDCA0; // 0x1010 AGC_Ctrl5 //0x0FB2E0B7 Modify for 33's 1.0.95.xxx version
1653                         pltmp[5] = 0x00caa332; // 0x00caa333; // 0x1014 AGC_Ctrl6 Modify for 33's 1.0.95.xxx version
1654                         pltmp[6] = 0XF6632111; // 0XF1632112; // 0x1018 AGC_Ctrl7               //0xf6632112 Modify for 33's 1.0.95.xxx version
1655                         pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
1656                         pltmp[8] = 0x04C43640; // 0x1020 AGC_Ctrl9
1657                         pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
1658                         pltmp[10] = 0X40000528;                                                 //0x40000228
1659                         pltmp[11] = 0x232dfF30; // 0x232A9F30; // 0x102c A_ACQ_Ctrl     //0x232a9730
1660                         pWb35Reg->BB2C = 0x232dfF30; //Modify for 33's 1.0.95.xxx version, antenna 1
1661                         Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
1662
1663                         pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
1664                         pWb35Reg->BB30 = 0x00002C54;
1665                         pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
1666                         pltmp[2] = 0x5B2C8769; // 0x1038 B_TXRX_Ctrl    //0x5B6C8769
1667                         pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
1668                         pWb35Reg->BB3C = 0x00000000;
1669                         pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
1670                         pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
1671                         pltmp[6] = BB48_DEFAULT_AL2230_11G; // 0x1048 11b TX RC filter 20060613.2
1672                         pWb35Reg->BB48 = BB48_DEFAULT_AL2230_11G; // 20051221 ch14 20060613.2
1673                         pltmp[7] = BB4C_DEFAULT_AL2230_11G; // 0x104c 11b TX RC filter 20060613.2
1674                         pWb35Reg->BB4C = BB4C_DEFAULT_AL2230_11G; // 20060613.1 20060613.2
1675                         pltmp[8] = 0x27106200; // 0x1050 MODE_Ctrl
1676                         pWb35Reg->BB50 = 0x27106200;
1677                         pltmp[9] = 0; // 0x1054
1678                         pWb35Reg->BB54 = 0x00000000;
1679                         pltmp[10] = 0x52524242; // 0x1058 IQ_Alpha
1680                         pWb35Reg->BB58 = 0x52524242;
1681                         pltmp[11] = 0xAA0AC000; // 0x105c DC_Cancel
1682                         Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
1683
1684                         Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
1685                         break;
1686
1687                 case RF_AIROHA_2230S: // 20060420 Add this
1688
1689                         pltmp[0] = 0X16764A77; // 0x1000 AGC_Ctrl1              //0x16765A77
1690                         pltmp[1] = 0x9affafb2; // 0x1004 AGC_Ctrl2
1691                         pltmp[2] = 0x55d00a04; // 0x1008 AGC_Ctrl3
1692                         pltmp[3] = 0xFFFd203c; // 0xFFFb203a; // 0x100c AGC_Ctrl4 Modify for 33's 1.0.95.xxx version
1693                         pWb35Reg->BB0C = 0xFFFd203c;
1694                         pltmp[4] = 0X0FBFDCc5; // 0X0FBFDCA0; // 0x1010 AGC_Ctrl5 //0x0FB2E0B7 Modify for 33's 1.0.95.xxx version
1695                         pltmp[5] = 0x00caa332; // 0x00caa333; // 0x1014 AGC_Ctrl6 Modify for 33's 1.0.95.xxx version
1696                         pltmp[6] = 0XF6632111; // 0XF1632112; // 0x1018 AGC_Ctrl7               //0xf6632112 Modify for 33's 1.0.95.xxx version
1697                         pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
1698                         pltmp[8] = 0x04C43640; // 0x1020 AGC_Ctrl9
1699                         pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
1700                         pltmp[10] = 0X40000528;                                                 //0x40000228
1701                         pltmp[11] = 0x232dfF30; // 0x232A9F30; // 0x102c A_ACQ_Ctrl     //0x232a9730
1702                         pWb35Reg->BB2C = 0x232dfF30; //Modify for 33's 1.0.95.xxx version, antenna 1
1703                         Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
1704
1705                         pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
1706                         pWb35Reg->BB30 = 0x00002C54;
1707                         pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
1708                         pltmp[2] = 0x5B2C8769; // 0x1038 B_TXRX_Ctrl    //0x5B6C8769
1709                         pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
1710                         pWb35Reg->BB3C = 0x00000000;
1711                         pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
1712                         pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
1713                         pltmp[6] = BB48_DEFAULT_AL2230_11G; // 0x1048 11b TX RC filter 20060613.2
1714                         pWb35Reg->BB48 = BB48_DEFAULT_AL2230_11G; // 20051221 ch14 20060613.2
1715                         pltmp[7] = BB4C_DEFAULT_AL2230_11G; // 0x104c 11b TX RC filter 20060613.2
1716                         pWb35Reg->BB4C = BB4C_DEFAULT_AL2230_11G; // 20060613.1
1717                         pltmp[8] = 0x27106200; // 0x1050 MODE_Ctrl
1718                         pWb35Reg->BB50 = 0x27106200;
1719                         pltmp[9] = 0; // 0x1054
1720                         pWb35Reg->BB54 = 0x00000000;
1721                         pltmp[10] = 0x52523232; // 20060419 0x52524242; // 0x1058 IQ_Alpha
1722                         pWb35Reg->BB58 = 0x52523232; // 20060419 0x52524242;
1723                         pltmp[11] = 0xAA0AC000; // 0x105c DC_Cancel
1724                         Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
1725
1726                         Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
1727                         break;
1728
1729                 case RF_AIROHA_7230:
1730 /*
1731                         pltmp[0] = 0x16a84a77; // 0x1000 AGC_Ctrl1
1732                         pltmp[1] = 0x9affafb2; // 0x1004 AGC_Ctrl2
1733                         pltmp[2] = 0x55d00a04; // 0x1008 AGC_Ctrl3
1734                         pltmp[3] = 0xFFFb203a; // 0x100c AGC_Ctrl4
1735                         pWb35Reg->BB0c = 0xFFFb203a;
1736                         pltmp[4] = 0x0FBFDCB7; // 0x1010 AGC_Ctrl5
1737                         pltmp[5] = 0x00caa333; // 0x1014 AGC_Ctrl6
1738                         pltmp[6] = 0xf6632112; // 0x1018 AGC_Ctrl7
1739                         pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
1740                         pltmp[8] = 0x04C43640; // 0x1020 AGC_Ctrl9
1741                         pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
1742                         pltmp[10] = 0x40000228;
1743                         pltmp[11] = 0x232A9F30;// 0x102c A_ACQ_Ctrl
1744                         pWb35Reg->BB2c = 0x232A9F30;
1745                         Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
1746
1747                         pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
1748                         pWb35Reg->BB30 = 0x00002C54;
1749                         pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
1750                         pltmp[2] = 0x5B2C8769; // 0x1038 B_TXRX_Ctrl
1751                         pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
1752                         pWb35Reg->BB3c = 0x00000000;
1753                         pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
1754                         pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
1755                         pltmp[6] = 0x00453B24; // 0x1048 11b TX RC filter
1756                         pltmp[7] = 0x0E00FEFF; // 0x104c 11b TX RC filter
1757                         pltmp[8] = 0x27106200; // 0x1050 MODE_Ctrl
1758                         pWb35Reg->BB50 = 0x27106200;
1759                         pltmp[9] = 0; // 0x1054
1760                         pWb35Reg->BB54 = 0x00000000;
1761                         pltmp[10] = 0x64645252; // 0x1058 IQ_Alpha
1762                         pWb35Reg->BB58 = 0x64645252;
1763                         pltmp[11] = 0xAA0AC000; // 0x105c DC_Cancel
1764                         Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
1765 */
1766                         BBProcessor_AL7230_2400( pHwData );
1767
1768                         Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
1769                         break;
1770
1771                 case RF_WB_242:
1772                 case RF_WB_242_1: // 20060619.5 Add
1773
1774                         pltmp[0] = 0x16A8525D; // 0x1000 AGC_Ctrl1
1775                         pltmp[1] = 0x9AFF9ABA; // 0x1004 AGC_Ctrl2
1776                         pltmp[2] = 0x55D00A04; // 0x1008 AGC_Ctrl3
1777                         pltmp[3] = 0xEEE91C32; // 0x100c AGC_Ctrl4
1778                         pWb35Reg->BB0C = 0xEEE91C32;
1779                         pltmp[4] = 0x0FACDCC5; // 0x1010 AGC_Ctrl5
1780                         pltmp[5] = 0x000AA344; // 0x1014 AGC_Ctrl6
1781                         pltmp[6] = 0x22222221; // 0x1018 AGC_Ctrl7
1782                         pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
1783                         pltmp[8] = 0x04CC3440; // 20051018 0x03CB3440; // 0x1020 AGC_Ctrl9 20051014 0x03C33440
1784                         pltmp[9] = 0xA9002A79; // 0x1024 AGC_Ctrl10
1785                         pltmp[10] = 0x40000528; // 0x1028
1786                         pltmp[11] = 0x23457F30; // 0x102c A_ACQ_Ctrl
1787                         pWb35Reg->BB2C = 0x23457F30;
1788                         Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
1789
1790                         pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
1791                         pWb35Reg->BB30 = 0x00002C54;
1792                         pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
1793                         pltmp[2] = 0x5B2C8769; // 0x1038 B_TXRX_Ctrl
1794                         pltmp[3] = pHwData->BB3c_cal; // 0x103c 11a TX LS filter
1795                         pWb35Reg->BB3C = pHwData->BB3c_cal;
1796                         pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
1797                         pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
1798                         pltmp[6] = BB48_DEFAULT_WB242_11G; // 0x1048 11b TX RC filter 20060613.2
1799                         pWb35Reg->BB48 = BB48_DEFAULT_WB242_11G; // 20060613.1 20060613.2
1800                         pltmp[7] = BB4C_DEFAULT_WB242_11G; // 0x104c 11b TX RC filter 20060613.2
1801                         pWb35Reg->BB4C = BB4C_DEFAULT_WB242_11G; // 20060613.1 20060613.2
1802                         pltmp[8] = 0x27106208; // 0x1050 MODE_Ctrl
1803                         pWb35Reg->BB50 = 0x27106208;
1804                         pltmp[9] = pHwData->BB54_cal; // 0x1054
1805                         pWb35Reg->BB54 = pHwData->BB54_cal;
1806                         pltmp[10] = 0x52523131; // 0x1058 IQ_Alpha
1807                         pWb35Reg->BB58 = 0x52523131;
1808                         pltmp[11] = 0xAA0AC000; // 20060825 0xAA2AC000; // 0x105c DC_Cancel
1809                         Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
1810
1811                         Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
1812                         break;
1813     }
1814
1815         // Fill the LNA table
1816         pWb35Reg->LNAValue[0] = (u8)(pWb35Reg->BB0C & 0xff);
1817         pWb35Reg->LNAValue[1] = 0;
1818         pWb35Reg->LNAValue[2] = (u8)((pWb35Reg->BB0C & 0xff00)>>8);
1819         pWb35Reg->LNAValue[3] = 0;
1820
1821         // Fill SQ3 table
1822         for( i=0; i<MAX_SQ3_FILTER_SIZE; i++ )
1823                 pWb35Reg->SQ3_filter[i] = 0x2f; // half of Bit 0 ~ 6
1824 }
1825
1826 void set_tx_power_per_channel_max2829(  phw_data_t pHwData,  ChanInfo Channel)
1827 {
1828         RFSynthesizer_SetPowerIndex( pHwData, 100 ); // 20060620.1 Modify
1829 }
1830
1831 void set_tx_power_per_channel_al2230(  phw_data_t pHwData,  ChanInfo Channel )
1832 {
1833         u8      index = 100;
1834
1835         if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff) // 20060620.1 Add
1836                 index = pHwData->TxVgaFor24[Channel.ChanNo - 1];
1837
1838         RFSynthesizer_SetPowerIndex( pHwData, index );
1839 }
1840
1841 void set_tx_power_per_channel_al7230(  phw_data_t pHwData,  ChanInfo Channel)
1842 {
1843         u8      i, index = 100;
1844
1845         switch ( Channel.band )
1846         {
1847                 case BAND_TYPE_DSSS:
1848                 case BAND_TYPE_OFDM_24:
1849                         {
1850                                 if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff)
1851                                         index = pHwData->TxVgaFor24[Channel.ChanNo - 1];
1852                         }
1853                         break;
1854                 case BAND_TYPE_OFDM_5:
1855                         {
1856                                 for (i =0; i<35; i++)
1857                                 {
1858                                         if (Channel.ChanNo == pHwData->TxVgaFor50[i].ChanNo)
1859                                         {
1860                                                 if (pHwData->TxVgaFor50[i].TxVgaValue != 0xff)
1861                                                         index = pHwData->TxVgaFor50[i].TxVgaValue;
1862                                                 break;
1863                                         }
1864                                 }
1865                         }
1866                         break;
1867         }
1868         RFSynthesizer_SetPowerIndex( pHwData, index );
1869 }
1870
1871 void set_tx_power_per_channel_wb242(  phw_data_t pHwData,  ChanInfo Channel)
1872 {
1873         u8      index = 100;
1874
1875         switch ( Channel.band )
1876         {
1877                 case BAND_TYPE_DSSS:
1878                 case BAND_TYPE_OFDM_24:
1879                         {
1880                                 if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff)
1881                                         index = pHwData->TxVgaFor24[Channel.ChanNo - 1];
1882                         }
1883                         break;
1884                 case BAND_TYPE_OFDM_5:
1885                         break;
1886         }
1887         RFSynthesizer_SetPowerIndex( pHwData, index );
1888 }
1889
1890 //=============================================================================================================
1891 // RFSynthesizer_SwitchingChannel --
1892 //
1893 // Description:
1894 //   Swithch the RF channel.
1895 //
1896 // Arguments:
1897 //   pHwData    - Handle of the USB Device.
1898 //   Channel    - The channel no.
1899 //
1900 // Return values:
1901 //   None.
1902 //=============================================================================================================
1903 void
1904 RFSynthesizer_SwitchingChannel(  phw_data_t pHwData,  ChanInfo Channel )
1905 {
1906         PWB35REG pWb35Reg = &pHwData->Wb35Reg;
1907         u32     pltmp[16]; // The 16 is the maximum capability of hardware
1908         u32     count, ltmp;
1909         u8      i, j, number;
1910         u8      ChnlTmp;
1911
1912         switch( pHwData->phy_type )
1913         {
1914                 case RF_MAXIM_2825:
1915                 case RF_MAXIM_V1: // 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331)
1916
1917                         if( Channel.band <= BAND_TYPE_OFDM_24 ) // channel 1 ~ 13
1918                         {
1919                                 for( i=0; i<3; i++ )
1920                                         pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2825_channel_data_24[Channel.ChanNo-1][i], 18);
1921                                 Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
1922                         }
1923                         RFSynthesizer_SetPowerIndex( pHwData, 100 );
1924                         break;
1925
1926                 case RF_MAXIM_2827:
1927
1928                         if( Channel.band <= BAND_TYPE_OFDM_24 ) // channel 1 ~ 13
1929                         {
1930                                 for( i=0; i<3; i++ )
1931                                         pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2827_channel_data_24[Channel.ChanNo-1][i], 18);
1932                                 Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
1933                         }
1934                         else if( Channel.band == BAND_TYPE_OFDM_5 ) // channel 36 ~ 64
1935                         {
1936                                 ChnlTmp = (Channel.ChanNo - 36) / 4;
1937                                 for( i=0; i<3; i++ )
1938                                         pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2827_channel_data_50[ChnlTmp][i], 18);
1939                                 Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
1940                         }
1941                         RFSynthesizer_SetPowerIndex( pHwData, 100 );
1942                         break;
1943
1944                 case RF_MAXIM_2828:
1945
1946                         if( Channel.band <= BAND_TYPE_OFDM_24 ) // channel 1 ~ 13
1947                         {
1948                                 for( i=0; i<3; i++ )
1949                                         pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2828_channel_data_24[Channel.ChanNo-1][i], 18);
1950                                 Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
1951                         }
1952                         else if( Channel.band == BAND_TYPE_OFDM_5 ) // channel 36 ~ 64
1953                         {
1954                                 ChnlTmp = (Channel.ChanNo - 36) / 4;
1955                                 for ( i = 0; i < 3; i++)
1956                                         pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2828_channel_data_50[ChnlTmp][i], 18);
1957                                 Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
1958                         }
1959                         RFSynthesizer_SetPowerIndex( pHwData, 100 );
1960                         break;
1961
1962                 case RF_MAXIM_2829:
1963
1964                         if( Channel.band <= BAND_TYPE_OFDM_24)
1965                         {
1966                                 for( i=0; i<3; i++ )
1967                                         pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2829_channel_data_24[Channel.ChanNo-1][i], 18);
1968                                 Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
1969                         }
1970                         else if( Channel.band == BAND_TYPE_OFDM_5 )
1971                         {
1972                                 count = sizeof(max2829_channel_data_50) / sizeof(max2829_channel_data_50[0]);
1973
1974                                 for( i=0; i<count; i++ )
1975                                 {
1976                                         if( max2829_channel_data_50[i][0] == Channel.ChanNo )
1977                                         {
1978                                                 for( j=0; j<3; j++ )
1979                                                         pltmp[j] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2829_channel_data_50[i][j+1], 18);
1980                                                 Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
1981
1982                                                 if( (max2829_channel_data_50[i][3] & 0x3FFFF) == 0x2A946 )
1983                                                 {
1984                                                         ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( (5<<18)|0x2A906, 18);
1985                                                         Wb35Reg_Write( pHwData, 0x0864, ltmp );
1986                                                 }
1987                                                 else    // 0x2A9C6
1988                                                 {
1989                                                         ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( (5<<18)|0x2A986, 18);
1990                                                         Wb35Reg_Write( pHwData, 0x0864, ltmp );
1991                                                 }
1992                                         }
1993                                 }
1994                         }
1995                         set_tx_power_per_channel_max2829( pHwData, Channel );
1996                         break;
1997
1998                 case RF_AIROHA_2230:
1999                 case RF_AIROHA_2230S: // 20060420 Add this
2000
2001                         if( Channel.band <= BAND_TYPE_OFDM_24 ) // channel 1 ~ 14
2002                         {
2003                                 for( i=0; i<2; i++ )
2004                                         pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( al2230_channel_data_24[Channel.ChanNo-1][i], 20);
2005                                 Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 2, NO_INCREMENT );
2006                         }
2007                         set_tx_power_per_channel_al2230( pHwData, Channel );
2008                         break;
2009
2010                 case RF_AIROHA_7230:
2011
2012                         //Start to fill RF parameters, PLL_ON should be pulled low.
2013                         //Wb35Reg_Write( pHwData, 0x03dc, 0x00000000 );
2014                         //WBDEBUG(("* PLL_ON    low\n"));
2015
2016                         //Channel independent registers
2017                         if( Channel.band != pHwData->band)
2018                         {
2019                                 if (Channel.band <= BAND_TYPE_OFDM_24)
2020                                 {
2021                                         //Update BB register
2022                                         BBProcessor_AL7230_2400(pHwData);
2023
2024                                         number = sizeof(al7230_rf_data_24)/sizeof(al7230_rf_data_24[0]);
2025                                         Set_ChanIndep_RfData_al7230_24(pHwData, pltmp, number);
2026                                 }
2027                                 else
2028                                 {
2029                                         //Update BB register
2030                                         BBProcessor_AL7230_5000(pHwData);
2031
2032                                         number = sizeof(al7230_rf_data_50)/sizeof(al7230_rf_data_50[0]);
2033                                         Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number);
2034                                 }
2035
2036                                 // Write to register. number must less and equal than 16
2037                                 Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, number, NO_INCREMENT );
2038                                 #ifdef _PE_STATE_DUMP_
2039                                 WBDEBUG(("Band changed\n"));
2040                                 #endif
2041                         }
2042
2043                         if( Channel.band <= BAND_TYPE_OFDM_24 ) // channel 1 ~ 14
2044                         {
2045                                 for( i=0; i<2; i++ )
2046                                         pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_channel_data_24[Channel.ChanNo-1][i]&0xffffff);
2047                                 Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 2, NO_INCREMENT );
2048                         }
2049                         else if( Channel.band == BAND_TYPE_OFDM_5 )
2050                         {
2051                                 //Update Reg12
2052                                 if ((Channel.ChanNo > 64) && (Channel.ChanNo <= 165))
2053                                 {
2054                                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x00143c;
2055                                         Wb35Reg_Write( pHwData, 0x0864, ltmp );
2056                                 }
2057                                 else    //reg12 = 0x00147c at Channel 4920 ~ 5320
2058                                 {
2059                                         ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x00147c;
2060                                         Wb35Reg_Write( pHwData, 0x0864, ltmp );
2061                                 }
2062
2063                                 count = sizeof(al7230_channel_data_5) / sizeof(al7230_channel_data_5[0]);
2064
2065                                 for (i=0; i<count; i++)
2066                                 {
2067                                         if (al7230_channel_data_5[i][0] == Channel.ChanNo)
2068                                         {
2069                                                 for( j=0; j<3; j++ )
2070                                                         pltmp[j] = (1 << 31) | (0 << 30) | (24 << 24) | ( al7230_channel_data_5[i][j+1]&0xffffff);
2071                                                 Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
2072                                         }
2073                                 }
2074                         }
2075                         set_tx_power_per_channel_al7230(pHwData, Channel);
2076                         break;
2077
2078                 case RF_WB_242:
2079                 case RF_WB_242_1: // 20060619.5 Add
2080
2081                         if( Channel.band <= BAND_TYPE_OFDM_24 ) // channel 1 ~ 14
2082                         {
2083                                 ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( w89rf242_channel_data_24[Channel.ChanNo-1][0], 24);
2084                                 Wb35Reg_Write( pHwData, 0x864, ltmp );
2085                         }
2086                         set_tx_power_per_channel_wb242(pHwData, Channel);
2087                         break;
2088         }
2089
2090         if( Channel.band <= BAND_TYPE_OFDM_24 )
2091         {
2092         // BB: select 2.4 GHz, bit[12-11]=00
2093                 pWb35Reg->BB50 &= ~(BIT(11)|BIT(12));
2094                 Wb35Reg_Write( pHwData, 0x1050, pWb35Reg->BB50 ); // MODE_Ctrl
2095         // MAC: select 2.4 GHz, bit[5]=0
2096                 pWb35Reg->M78_ERPInformation &= ~BIT(5);
2097                 Wb35Reg_Write( pHwData, 0x0878, pWb35Reg->M78_ERPInformation );
2098         // enable 11b Baseband
2099                 pWb35Reg->BB30 &= ~BIT(31);
2100                 Wb35Reg_Write( pHwData, 0x1030, pWb35Reg->BB30 );
2101         }
2102         else if( (Channel.band == BAND_TYPE_OFDM_5) )
2103         {
2104         // BB: select 5 GHz
2105                 pWb35Reg->BB50 &= ~(BIT(11)|BIT(12));
2106                 if (Channel.ChanNo <=64 )
2107                         pWb35Reg->BB50 |= BIT(12);                              // 10-5.25GHz
2108                 else if ((Channel.ChanNo >= 100) && (Channel.ChanNo <= 124))
2109                         pWb35Reg->BB50 |= BIT(11);                              // 01-5.48GHz
2110                 else if ((Channel.ChanNo >=128) && (Channel.ChanNo <= 161))
2111                         pWb35Reg->BB50 |= (BIT(12)|BIT(11));    // 11-5.775GHz
2112                 else    //Chan 184 ~ 196 will use bit[12-11] = 10 in version sh-src-1.2.25
2113                         pWb35Reg->BB50 |= BIT(12);
2114                 Wb35Reg_Write( pHwData, 0x1050, pWb35Reg->BB50 ); // MODE_Ctrl
2115
2116                 //(1) M78 should alway use 2.4G setting when using RF_AIROHA_7230
2117                 //(2) BB30 has been updated previously.
2118                 if (pHwData->phy_type != RF_AIROHA_7230)
2119                 {
2120             // MAC: select 5 GHz, bit[5]=1
2121                         pWb35Reg->M78_ERPInformation |= BIT(5);
2122                         Wb35Reg_Write( pHwData, 0x0878, pWb35Reg->M78_ERPInformation );
2123
2124             // disable 11b Baseband
2125                         pWb35Reg->BB30 |= BIT(31);
2126                         Wb35Reg_Write( pHwData, 0x1030, pWb35Reg->BB30 );
2127                 }
2128         }
2129 }
2130
2131 //Set the tx power directly from DUT GUI, not from the EEPROM. Return the current setting
2132 u8 RFSynthesizer_SetPowerIndex(  phw_data_t pHwData,  u8 PowerIndex )
2133 {
2134         u32     Band = pHwData->band;
2135         u8      index=0;
2136
2137         if( pHwData->power_index == PowerIndex ) // 20060620.1 Add
2138                 return PowerIndex;
2139
2140         if (RF_MAXIM_2825 == pHwData->phy_type)
2141         {
2142                 // Channel 1 - 13
2143                 index = RFSynthesizer_SetMaxim2825Power( pHwData, PowerIndex );
2144         }
2145         else if (RF_MAXIM_2827 == pHwData->phy_type)
2146         {
2147                 if( Band <= BAND_TYPE_OFDM_24 )    // Channel 1 - 13
2148                         index = RFSynthesizer_SetMaxim2827_24Power( pHwData, PowerIndex );
2149                 else// if( Band == BAND_TYPE_OFDM_5 )  // Channel 36 - 64
2150                         index = RFSynthesizer_SetMaxim2827_50Power( pHwData, PowerIndex );
2151         }
2152         else if (RF_MAXIM_2828 == pHwData->phy_type)
2153         {
2154                 if( Band <= BAND_TYPE_OFDM_24 )    // Channel 1 - 13
2155                         index = RFSynthesizer_SetMaxim2828_24Power( pHwData, PowerIndex );
2156                 else// if( Band == BAND_TYPE_OFDM_5 )  // Channel 36 - 64
2157                         index = RFSynthesizer_SetMaxim2828_50Power( pHwData, PowerIndex );
2158         }
2159         else if( RF_AIROHA_2230 == pHwData->phy_type )
2160         {
2161                 //Power index: 0 ~ 63 // Channel 1 - 14
2162                 index = RFSynthesizer_SetAiroha2230Power( pHwData, PowerIndex );
2163                 index = (u8)al2230_txvga_data[index][1];
2164         }
2165         else if( RF_AIROHA_2230S == pHwData->phy_type ) // 20060420 Add this
2166         {
2167                 //Power index: 0 ~ 63 // Channel 1 - 14
2168                 index = RFSynthesizer_SetAiroha2230Power( pHwData, PowerIndex );
2169                 index = (u8)al2230_txvga_data[index][1];
2170         }
2171         else if( RF_AIROHA_7230 == pHwData->phy_type )
2172         {
2173                 //Power index: 0 ~ 63
2174                 index = RFSynthesizer_SetAiroha7230Power( pHwData, PowerIndex );
2175                 index = (u8)al7230_txvga_data[index][1];
2176         }
2177         else if( (RF_WB_242 == pHwData->phy_type) ||
2178                  (RF_WB_242_1 == pHwData->phy_type) ) // 20060619.5 Add
2179         {
2180                 //Power index: 0 ~ 19 for original. New range is 0 ~ 33
2181                 index = RFSynthesizer_SetWinbond242Power( pHwData, PowerIndex );
2182                 index = (u8)w89rf242_txvga_data[index][1];
2183         }
2184
2185         pHwData->power_index = index;  // Backup current
2186         return index;
2187 }
2188
2189 //-- Sub function
2190 u8 RFSynthesizer_SetMaxim2828_24Power(  phw_data_t pHwData, u8 index )
2191 {
2192         u32             PowerData;
2193         if( index > 1 ) index = 1;
2194         PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2828_power_data_24[index], 18);
2195         Wb35Reg_Write( pHwData, 0x0864, PowerData );
2196         return index;
2197 }
2198 //--
2199 u8 RFSynthesizer_SetMaxim2828_50Power(  phw_data_t pHwData, u8 index )
2200 {
2201         u32             PowerData;
2202         if( index > 1 ) index = 1;
2203         PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2828_power_data_50[index], 18);
2204         Wb35Reg_Write( pHwData, 0x0864, PowerData );
2205         return index;
2206 }
2207 //--
2208 u8 RFSynthesizer_SetMaxim2827_24Power(  phw_data_t pHwData, u8 index )
2209 {
2210         u32             PowerData;
2211         if( index > 1 ) index = 1;
2212         PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2827_power_data_24[index], 18);
2213         Wb35Reg_Write( pHwData, 0x0864, PowerData );
2214         return index;
2215 }
2216 //--
2217 u8 RFSynthesizer_SetMaxim2827_50Power(  phw_data_t pHwData, u8 index )
2218 {
2219         u32             PowerData;
2220         if( index > 1 ) index = 1;
2221         PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2827_power_data_50[index], 18);
2222         Wb35Reg_Write( pHwData, 0x0864, PowerData );
2223         return index;
2224 }
2225 //--
2226 u8 RFSynthesizer_SetMaxim2825Power(  phw_data_t pHwData, u8 index )
2227 {
2228         u32             PowerData;
2229         if( index > 1 ) index = 1;
2230         PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2825_power_data_24[index], 18);
2231         Wb35Reg_Write( pHwData, 0x0864, PowerData );
2232         return index;
2233 }
2234 //--
2235 u8 RFSynthesizer_SetAiroha2230Power(  phw_data_t pHwData, u8 index )
2236 {
2237         u32             PowerData;
2238         u8              i,count;
2239
2240         count = sizeof(al2230_txvga_data) / sizeof(al2230_txvga_data[0]);
2241         for (i=0; i<count; i++)
2242         {
2243                 if (al2230_txvga_data[i][1] >= index)
2244                         break;
2245         }
2246         if (i == count)
2247                 i--;
2248
2249         PowerData = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( al2230_txvga_data[i][0], 20);
2250         Wb35Reg_Write( pHwData, 0x0864, PowerData );
2251         return i;
2252 }
2253 //--
2254 u8 RFSynthesizer_SetAiroha7230Power(  phw_data_t pHwData, u8 index )
2255 {
2256         u32             PowerData;
2257         u8              i,count;
2258
2259         //PowerData = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( airoha_power_data_24[index], 20);
2260         count = sizeof(al7230_txvga_data) / sizeof(al7230_txvga_data[0]);
2261         for (i=0; i<count; i++)
2262         {
2263                 if (al7230_txvga_data[i][1] >= index)
2264                         break;
2265         }
2266         if (i == count)
2267                 i--;
2268         PowerData = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_txvga_data[i][0]&0xffffff);
2269         Wb35Reg_Write( pHwData, 0x0864, PowerData );
2270         return i;
2271 }
2272
2273 u8 RFSynthesizer_SetWinbond242Power(  phw_data_t pHwData, u8 index )
2274 {
2275         u32             PowerData;
2276         u8              i,count;
2277
2278         count = sizeof(w89rf242_txvga_data) / sizeof(w89rf242_txvga_data[0]);
2279         for (i=0; i<count; i++)
2280         {
2281                 if (w89rf242_txvga_data[i][1] >= index)
2282                         break;
2283         }
2284         if (i == count)
2285                 i--;
2286
2287         // Set TxVga into RF
2288         PowerData = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( w89rf242_txvga_data[i][0], 24);
2289         Wb35Reg_Write( pHwData, 0x0864, PowerData );
2290
2291         // Update BB48 BB4C BB58 for high precision txvga
2292         Wb35Reg_Write( pHwData, 0x1048, w89rf242_txvga_data[i][2] );
2293         Wb35Reg_Write( pHwData, 0x104c, w89rf242_txvga_data[i][3] );
2294         Wb35Reg_Write( pHwData, 0x1058, w89rf242_txvga_data[i][4] );
2295
2296 // Rf vga 0 ~ 3 for temperature compensate. It will affect the scan Bss.
2297 // The i value equals to 8 or 7 usually. So It's not necessary to setup this RF register.
2298 //      if( i <= 3 )
2299 //              PowerData = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( 0x000024, 24 );
2300 //      else
2301 //              PowerData = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( 0x001824, 24 );
2302 //      Wb35Reg_Write( pHwData, 0x0864, PowerData );
2303         return i;
2304 }
2305
2306 //===========================================================================================================
2307 // Dxx_initial --
2308 // Mxx_initial --
2309         //
2310 //  Routine Description:
2311 //              Initial the hardware setting and module variable
2312         //
2313 //===========================================================================================================
2314 void Dxx_initial(  phw_data_t pHwData )
2315 {
2316         PWB35REG        pWb35Reg = &pHwData->Wb35Reg;
2317
2318         // Old IC:Single mode only.
2319         // New IC: operation decide by Software set bit[4]. 1:multiple 0: single
2320         pWb35Reg->D00_DmaControl = 0xc0000004;  //Txon, Rxon, multiple Rx for new 4k DMA
2321                                                                                         //Txon, Rxon, single Rx for old 8k ASIC
2322         if( !HAL_USB_MODE_BURST( pHwData ) )
2323                 pWb35Reg->D00_DmaControl = 0xc0000000;//Txon, Rxon, single Rx for new 4k DMA
2324
2325         Wb35Reg_WriteSync( pHwData, 0x0400, pWb35Reg->D00_DmaControl );
2326 }
2327
2328 void Mxx_initial(  phw_data_t pHwData )
2329 {
2330         PWB35REG        pWb35Reg = &pHwData->Wb35Reg;
2331         u32             tmp;
2332         u32             pltmp[11];
2333         u16     i;
2334
2335
2336         //======================================================
2337         // Initial Mxx register
2338         //======================================================
2339
2340         // M00 bit set
2341 #ifdef _IBSS_BEACON_SEQ_STICK_
2342         pWb35Reg->M00_MacControl = 0; // Solve beacon sequence number stop by software
2343 #else
2344         pWb35Reg->M00_MacControl = 0x80000000; // Solve beacon sequence number stop by hardware
2345 #endif
2346
2347         // M24 disable enter power save, BB RxOn and enable NAV attack
2348         pWb35Reg->M24_MacControl = 0x08040042;
2349         pltmp[0] = pWb35Reg->M24_MacControl;
2350
2351         pltmp[1] = 0; // Skip M28, because no initialize value is required.
2352
2353         // M2C CWmin and CWmax setting
2354         pHwData->cwmin = DEFAULT_CWMIN;
2355         pHwData->cwmax = DEFAULT_CWMAX;
2356         pWb35Reg->M2C_MacControl = DEFAULT_CWMIN << 10;
2357         pWb35Reg->M2C_MacControl |= DEFAULT_CWMAX;
2358         pltmp[2] = pWb35Reg->M2C_MacControl;
2359
2360         // M30 BSSID
2361         pltmp[3] = *(PULONG)pHwData->bssid;
2362
2363         // M34
2364         pHwData->AID = DEFAULT_AID;
2365         tmp = *(PUSHORT)(pHwData->bssid+4);
2366         tmp |= DEFAULT_AID << 16;
2367         pltmp[4] = tmp;
2368
2369         // M38
2370         pWb35Reg->M38_MacControl = (DEFAULT_RATE_RETRY_LIMIT<<8) | (DEFAULT_LONG_RETRY_LIMIT << 4) | DEFAULT_SHORT_RETRY_LIMIT;
2371         pltmp[5] = pWb35Reg->M38_MacControl;
2372
2373         // M3C
2374         tmp = (DEFAULT_PIFST << 26) | (DEFAULT_EIFST << 16) | (DEFAULT_DIFST << 8) | (DEFAULT_SIFST << 4) | DEFAULT_OSIFST ;
2375         pWb35Reg->M3C_MacControl = tmp;
2376         pltmp[6] = tmp;
2377
2378         // M40
2379         pHwData->slot_time_select = DEFAULT_SLOT_TIME;
2380         tmp = (DEFAULT_ATIMWD << 16) | DEFAULT_SLOT_TIME;
2381         pWb35Reg->M40_MacControl = tmp;
2382         pltmp[7] = tmp;
2383
2384         // M44
2385         tmp = DEFAULT_MAX_TX_MSDU_LIFE_TIME << 10; // *1024
2386         pWb35Reg->M44_MacControl = tmp;
2387         pltmp[8] = tmp;
2388
2389         // M48
2390         pHwData->BeaconPeriod = DEFAULT_BEACON_INTERVAL;
2391         pHwData->ProbeDelay = DEFAULT_PROBE_DELAY_TIME;
2392         tmp = (DEFAULT_BEACON_INTERVAL << 16) | DEFAULT_PROBE_DELAY_TIME;
2393         pWb35Reg->M48_MacControl = tmp;
2394         pltmp[9] = tmp;
2395
2396         //M4C
2397         pWb35Reg->M4C_MacStatus = (DEFAULT_PROTOCOL_VERSION << 30) | (DEFAULT_MAC_POWER_STATE << 28) | (DEFAULT_DTIM_ALERT_TIME << 24);
2398         pltmp[10] = pWb35Reg->M4C_MacStatus;
2399
2400         // Burst write
2401         //Wb35Reg_BurstWrite( pHwData, 0x0824, pltmp, 11, AUTO_INCREMENT );
2402         for( i=0; i<11; i++ )
2403                 Wb35Reg_WriteSync( pHwData, 0x0824 + i*4, pltmp[i] );
2404
2405         // M60
2406         Wb35Reg_WriteSync( pHwData, 0x0860, 0x12481248 );
2407         pWb35Reg->M60_MacControl = 0x12481248;
2408
2409         // M68
2410         Wb35Reg_WriteSync( pHwData, 0x0868, 0x00050900 ); // 20051018 0x000F0F00 ); // 940930 0x00131300
2411         pWb35Reg->M68_MacControl = 0x00050900;
2412
2413         // M98
2414         Wb35Reg_WriteSync( pHwData, 0x0898, 0xffff8888 );
2415         pWb35Reg->M98_MacControl = 0xffff8888;
2416 }
2417
2418
2419 void Uxx_power_off_procedure(  phw_data_t pHwData )
2420 {
2421         // SW, PMU reset and turn off clock
2422         Wb35Reg_WriteSync( pHwData, 0x03b0, 3 );
2423         Wb35Reg_WriteSync( pHwData, 0x03f0, 0xf9 );
2424 }
2425
2426 //Decide the TxVga of every channel
2427 void GetTxVgaFromEEPROM(  phw_data_t pHwData )
2428 {
2429         u32             i, j, ltmp;
2430         u16             Value[MAX_TXVGA_EEPROM];
2431         PUCHAR          pctmp;
2432         u8              ctmp=0;
2433
2434         // Get the entire TxVga setting in EEPROM
2435         for( i=0; i<MAX_TXVGA_EEPROM; i++ )
2436         {
2437                 Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08100000 + 0x00010000*i );
2438                 Wb35Reg_ReadSync( pHwData, 0x03b4, &ltmp );
2439                 Value[i] = (u16)( ltmp & 0xffff ); // Get 16 bit available
2440                 Value[i] = cpu_to_le16( Value[i] ); // [7:0]2412 [7:0]2417 ....
2441         }
2442
2443         // Adjust the filed which fills with reserved value.
2444         pctmp = (PUCHAR)Value;
2445         for( i=0; i<(MAX_TXVGA_EEPROM*2); i++ )
2446         {
2447                 if( pctmp[i] != 0xff )
2448                         ctmp = pctmp[i];
2449                 else
2450                         pctmp[i] = ctmp;
2451         }
2452
2453         // Adjust WB_242 to WB_242_1 TxVga scale
2454         if( pHwData->phy_type == RF_WB_242 )
2455         {
2456                 for( i=0; i<4; i++ ) // Only 2412 2437 2462 2484 case must be modified
2457                 {
2458                         for( j=0; j<(sizeof(w89rf242_txvga_old_mapping)/sizeof(w89rf242_txvga_old_mapping[0])); j++ )
2459                         {
2460                                 if( pctmp[i] < (u8)w89rf242_txvga_old_mapping[j][1] )
2461                                 {
2462                                         pctmp[i] = (u8)w89rf242_txvga_old_mapping[j][0];
2463                                         break;
2464                                 }
2465                         }
2466
2467                         if( j == (sizeof(w89rf242_txvga_old_mapping)/sizeof(w89rf242_txvga_old_mapping[0])) )
2468                                 pctmp[i] = (u8)w89rf242_txvga_old_mapping[j-1][0];
2469                 }
2470         }
2471
2472         // 20060621 Add
2473         memcpy( pHwData->TxVgaSettingInEEPROM, pctmp, MAX_TXVGA_EEPROM*2 ); //MAX_TXVGA_EEPROM is u16 count
2474         EEPROMTxVgaAdjust( pHwData );
2475 }
2476
2477 // This function will affect the TxVga parameter in HAL. If hal_set_current_channel
2478 // or RFSynthesizer_SetPowerIndex be called, new TxVga will take effect.
2479 // TxVgaSettingInEEPROM of sHwData is an u8 array point to EEPROM contain for IS89C35
2480 // This function will use default TxVgaSettingInEEPROM data to calculate new TxVga.
2481 void EEPROMTxVgaAdjust(  phw_data_t pHwData ) // 20060619.5 Add
2482 {
2483         PUCHAR          pTxVga = pHwData->TxVgaSettingInEEPROM;
2484         s16             i, stmp;
2485
2486         //-- 2.4G -- 20060704.2 Request from Tiger
2487         //channel 1 ~ 5
2488         stmp = pTxVga[1] - pTxVga[0];
2489         for( i=0; i<5; i++ )
2490                 pHwData->TxVgaFor24[i] = pTxVga[0] + stmp*i/4;
2491         //channel 6 ~ 10
2492         stmp = pTxVga[2] - pTxVga[1];
2493         for( i=5; i<10; i++ )
2494                 pHwData->TxVgaFor24[i] = pTxVga[1] + stmp*(i-5)/4;
2495         //channel 11 ~ 13
2496         stmp = pTxVga[3] - pTxVga[2];
2497         for( i=10; i<13; i++ )
2498                 pHwData->TxVgaFor24[i] = pTxVga[2] + stmp*(i-10)/2;
2499         //channel 14
2500         pHwData->TxVgaFor24[13] = pTxVga[3];
2501
2502         //-- 5G --
2503         if( pHwData->phy_type == RF_AIROHA_7230 )
2504         {
2505                 //channel 184
2506                 pHwData->TxVgaFor50[0].ChanNo = 184;
2507                 pHwData->TxVgaFor50[0].TxVgaValue = pTxVga[4];
2508                 //channel 196
2509                 pHwData->TxVgaFor50[3].ChanNo = 196;
2510                 pHwData->TxVgaFor50[3].TxVgaValue = pTxVga[5];
2511                 //interpolate
2512                 pHwData->TxVgaFor50[1].ChanNo = 188;
2513                 pHwData->TxVgaFor50[2].ChanNo = 192;
2514                 stmp = pTxVga[5] - pTxVga[4];
2515                 pHwData->TxVgaFor50[2].TxVgaValue = pTxVga[5] - stmp/3;
2516                 pHwData->TxVgaFor50[1].TxVgaValue = pTxVga[5] - stmp*2/3;
2517
2518                 //channel 16
2519                 pHwData->TxVgaFor50[6].ChanNo = 16;
2520                 pHwData->TxVgaFor50[6].TxVgaValue = pTxVga[6];
2521                 pHwData->TxVgaFor50[4].ChanNo = 8;
2522                 pHwData->TxVgaFor50[4].TxVgaValue = pTxVga[6];
2523                 pHwData->TxVgaFor50[5].ChanNo = 12;
2524                 pHwData->TxVgaFor50[5].TxVgaValue = pTxVga[6];
2525
2526                 //channel 36
2527                 pHwData->TxVgaFor50[8].ChanNo = 36;
2528                 pHwData->TxVgaFor50[8].TxVgaValue = pTxVga[7];
2529                 pHwData->TxVgaFor50[7].ChanNo = 34;
2530                 pHwData->TxVgaFor50[7].TxVgaValue = pTxVga[7];
2531                 pHwData->TxVgaFor50[9].ChanNo = 38;
2532                 pHwData->TxVgaFor50[9].TxVgaValue = pTxVga[7];
2533
2534                 //channel 40
2535                 pHwData->TxVgaFor50[10].ChanNo = 40;
2536                 pHwData->TxVgaFor50[10].TxVgaValue = pTxVga[8];
2537                 //channel 48
2538                 pHwData->TxVgaFor50[14].ChanNo = 48;
2539                 pHwData->TxVgaFor50[14].TxVgaValue = pTxVga[9];
2540                 //interpolate
2541                 pHwData->TxVgaFor50[11].ChanNo = 42;
2542                 pHwData->TxVgaFor50[12].ChanNo = 44;
2543                 pHwData->TxVgaFor50[13].ChanNo = 46;
2544                 stmp = pTxVga[9] - pTxVga[8];
2545                 pHwData->TxVgaFor50[13].TxVgaValue = pTxVga[9] - stmp/4;
2546                 pHwData->TxVgaFor50[12].TxVgaValue = pTxVga[9] - stmp*2/4;
2547                 pHwData->TxVgaFor50[11].TxVgaValue = pTxVga[9] - stmp*3/4;
2548
2549                 //channel 52
2550                 pHwData->TxVgaFor50[15].ChanNo = 52;
2551                 pHwData->TxVgaFor50[15].TxVgaValue = pTxVga[10];
2552                 //channel 64
2553                 pHwData->TxVgaFor50[18].ChanNo = 64;
2554                 pHwData->TxVgaFor50[18].TxVgaValue = pTxVga[11];
2555                 //interpolate
2556                 pHwData->TxVgaFor50[16].ChanNo = 56;
2557                 pHwData->TxVgaFor50[17].ChanNo = 60;
2558                 stmp = pTxVga[11] - pTxVga[10];
2559                 pHwData->TxVgaFor50[17].TxVgaValue = pTxVga[11] - stmp/3;
2560                 pHwData->TxVgaFor50[16].TxVgaValue = pTxVga[11] - stmp*2/3;
2561
2562                 //channel 100
2563                 pHwData->TxVgaFor50[19].ChanNo = 100;
2564                 pHwData->TxVgaFor50[19].TxVgaValue = pTxVga[12];
2565                 //channel 112
2566                 pHwData->TxVgaFor50[22].ChanNo = 112;
2567                 pHwData->TxVgaFor50[22].TxVgaValue = pTxVga[13];
2568                 //interpolate
2569                 pHwData->TxVgaFor50[20].ChanNo = 104;
2570                 pHwData->TxVgaFor50[21].ChanNo = 108;
2571                 stmp = pTxVga[13] - pTxVga[12];
2572                 pHwData->TxVgaFor50[21].TxVgaValue = pTxVga[13] - stmp/3;
2573                 pHwData->TxVgaFor50[20].TxVgaValue = pTxVga[13] - stmp*2/3;
2574
2575                 //channel 128
2576                 pHwData->TxVgaFor50[26].ChanNo = 128;
2577                 pHwData->TxVgaFor50[26].TxVgaValue = pTxVga[14];
2578                 //interpolate
2579                 pHwData->TxVgaFor50[23].ChanNo = 116;
2580                 pHwData->TxVgaFor50[24].ChanNo = 120;
2581                 pHwData->TxVgaFor50[25].ChanNo = 124;
2582                 stmp = pTxVga[14] - pTxVga[13];
2583                 pHwData->TxVgaFor50[25].TxVgaValue = pTxVga[14] - stmp/4;
2584                 pHwData->TxVgaFor50[24].TxVgaValue = pTxVga[14] - stmp*2/4;
2585                 pHwData->TxVgaFor50[23].TxVgaValue = pTxVga[14] - stmp*3/4;
2586
2587                 //channel 140
2588                 pHwData->TxVgaFor50[29].ChanNo = 140;
2589                 pHwData->TxVgaFor50[29].TxVgaValue = pTxVga[15];
2590                 //interpolate
2591                 pHwData->TxVgaFor50[27].ChanNo = 132;
2592                 pHwData->TxVgaFor50[28].ChanNo = 136;
2593                 stmp = pTxVga[15] - pTxVga[14];
2594                 pHwData->TxVgaFor50[28].TxVgaValue = pTxVga[15] - stmp/3;
2595                 pHwData->TxVgaFor50[27].TxVgaValue = pTxVga[15] - stmp*2/3;
2596
2597                 //channel 149
2598                 pHwData->TxVgaFor50[30].ChanNo = 149;
2599                 pHwData->TxVgaFor50[30].TxVgaValue = pTxVga[16];
2600                 //channel 165
2601                 pHwData->TxVgaFor50[34].ChanNo = 165;
2602                 pHwData->TxVgaFor50[34].TxVgaValue = pTxVga[17];
2603                 //interpolate
2604                 pHwData->TxVgaFor50[31].ChanNo = 153;
2605                 pHwData->TxVgaFor50[32].ChanNo = 157;
2606                 pHwData->TxVgaFor50[33].ChanNo = 161;
2607                 stmp = pTxVga[17] - pTxVga[16];
2608                 pHwData->TxVgaFor50[33].TxVgaValue = pTxVga[17] - stmp/4;
2609                 pHwData->TxVgaFor50[32].TxVgaValue = pTxVga[17] - stmp*2/4;
2610                 pHwData->TxVgaFor50[31].TxVgaValue = pTxVga[17] - stmp*3/4;
2611         }
2612
2613         #ifdef _PE_STATE_DUMP_
2614         WBDEBUG((" TxVgaFor24 : \n"));
2615         DataDmp((u8 *)pHwData->TxVgaFor24, 14 ,0);
2616         WBDEBUG((" TxVgaFor50 : \n"));
2617         DataDmp((u8 *)pHwData->TxVgaFor50, 70 ,0);
2618         #endif
2619 }
2620
2621 void BBProcessor_RateChanging(  phw_data_t pHwData,  u8 rate ) // 20060613.1
2622 {
2623         PWB35REG        pWb35Reg = &pHwData->Wb35Reg;
2624         unsigned char           Is11bRate;
2625
2626         Is11bRate = (rate % 6) ? 1 : 0;
2627         switch( pHwData->phy_type )
2628         {
2629                 case RF_AIROHA_2230:
2630                 case RF_AIROHA_2230S: // 20060420 Add this
2631                         if( Is11bRate )
2632                         {
2633                                 if( (pWb35Reg->BB48 != BB48_DEFAULT_AL2230_11B) &&
2634                                         (pWb35Reg->BB4C != BB4C_DEFAULT_AL2230_11B) )
2635                                 {
2636                                         Wb35Reg_Write( pHwData, 0x1048, BB48_DEFAULT_AL2230_11B );
2637                                         Wb35Reg_Write( pHwData, 0x104c, BB4C_DEFAULT_AL2230_11B );
2638                                 }
2639                         }
2640                         else
2641                         {
2642                                 if( (pWb35Reg->BB48 != BB48_DEFAULT_AL2230_11G) &&
2643                                         (pWb35Reg->BB4C != BB4C_DEFAULT_AL2230_11G) )
2644                                 {
2645                                         Wb35Reg_Write( pHwData, 0x1048, BB48_DEFAULT_AL2230_11G );
2646                                         Wb35Reg_Write( pHwData, 0x104c, BB4C_DEFAULT_AL2230_11G );
2647                                 }
2648                         }
2649                         break;
2650
2651                 case RF_WB_242: // 20060623 The fix only for old TxVGA setting
2652                         if( Is11bRate )
2653                         {
2654                                 if( (pWb35Reg->BB48 != BB48_DEFAULT_WB242_11B) &&
2655                                         (pWb35Reg->BB4C != BB4C_DEFAULT_WB242_11B) )
2656                                 {
2657                                         pWb35Reg->BB48 = BB48_DEFAULT_WB242_11B;
2658                                         pWb35Reg->BB4C = BB4C_DEFAULT_WB242_11B;
2659                                         Wb35Reg_Write( pHwData, 0x1048, BB48_DEFAULT_WB242_11B );
2660                                         Wb35Reg_Write( pHwData, 0x104c, BB4C_DEFAULT_WB242_11B );
2661                                 }
2662                         }
2663                         else
2664                         {
2665                                 if( (pWb35Reg->BB48 != BB48_DEFAULT_WB242_11G) &&
2666                                         (pWb35Reg->BB4C != BB4C_DEFAULT_WB242_11G) )
2667                                 {
2668                                         pWb35Reg->BB48 = BB48_DEFAULT_WB242_11G;
2669                                         pWb35Reg->BB4C = BB4C_DEFAULT_WB242_11G;
2670                                         Wb35Reg_Write( pHwData, 0x1048, BB48_DEFAULT_WB242_11G );
2671                                         Wb35Reg_Write( pHwData, 0x104c, BB4C_DEFAULT_WB242_11G );
2672                                 }
2673                         }
2674                         break;
2675         }
2676 }
2677
2678
2679
2680
2681
2682
2683