drivers/serial/8250_pci.c

   1 /*
   2  *  linux/drivers/char/8250_pci.c
   3  *
   4  *  Probe module for 8250/16550-type PCI serial ports.
   5  *
   6  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
   7  *
   8  *  Copyright (C) 2001 Russell King, All Rights Reserved.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License.
  13  */
  14 #include <linux/module.h>
  15 #include <linux/init.h>
  16 #include <linux/pci.h>
  17 #include <linux/string.h>
  18 #include <linux/kernel.h>
  19 #include <linux/slab.h>
  20 #include <linux/delay.h>
  21 #include <linux/tty.h>
  22 #include <linux/serial_core.h>
  23 #include <linux/8250_pci.h>
  24 #include <linux/bitops.h>
  25
  26 #include <asm/byteorder.h>
  27 #include <asm/io.h>
  28
  29 #include "8250.h"
  30
  31 #undef SERIAL_DEBUG_PCI
  32
  33 /*
  34  * init function returns:
  35  *  > 0 - number of ports
  36  *  = 0 - use board->num_ports
  37  *  < 0 - error
  38  */
  39 struct pci_serial_quirk {
  40         u32     vendor;
  41         u32     device;
  42         u32     subvendor;
  43         u32     subdevice;
  44         int     (*init)(struct pci_dev *dev);
  45         int     (*setup)(struct serial_private *, struct pciserial_board *,
  46                          struct uart_port *, int);
  47         void    (*exit)(struct pci_dev *dev);
  48 };
  49
  50 #define PCI_NUM_BAR_RESOURCES   6
  51
  52 struct serial_private {
  53         struct pci_dev          *dev;
  54         unsigned int            nr;
  55         void __iomem            *remapped_bar[PCI_NUM_BAR_RESOURCES];
  56         struct pci_serial_quirk *quirk;
  57         int                     line[0];
  58 };
  59
  60 static void moan_device(const char *str, struct pci_dev *dev)
  61 {
  62         printk(KERN_WARNING "%s: %s\n"
  63                KERN_WARNING "Please send the output of lspci -vv, this\n"
  64                KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
  65                KERN_WARNING "manufacturer and name of serial board or\n"
  66                KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n",
  67                pci_name(dev), str, dev->vendor, dev->device,
  68                dev->subsystem_vendor, dev->subsystem_device);
  69 }
  70
  71 static int
  72 setup_port(struct serial_private *priv, struct uart_port *port,
  73            int bar, int offset, int regshift)
  74 {
  75         struct pci_dev *dev = priv->dev;
  76         unsigned long base, len;
  77
  78         if (bar >= PCI_NUM_BAR_RESOURCES)
  79                 return -EINVAL;
  80
  81         base = pci_resource_start(dev, bar);
  82
  83         if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
  84                 len =  pci_resource_len(dev, bar);
  85
  86                 if (!priv->remapped_bar[bar])
  87                         priv->remapped_bar[bar] = ioremap_nocache(base, len);
  88                 if (!priv->remapped_bar[bar])
  89                         return -ENOMEM;
  90
  91                 port->iotype = UPIO_MEM;
  92                 port->iobase = 0;
  93                 port->mapbase = base + offset;
  94                 port->membase = priv->remapped_bar[bar] + offset;
  95                 port->regshift = regshift;
  96         } else {
  97                 port->iotype = UPIO_PORT;
  98                 port->iobase = base + offset;
  99                 port->mapbase = 0;
 100                 port->membase = NULL;
 101                 port->regshift = 0;
 102         }
 103         return 0;
 104 }
 105
 106 /*
 107  * ADDI-DATA GmbH communication cards <info@addi-data.com>
 108  */
 109 static int addidata_apci7800_setup(struct serial_private *priv,
 110                                 struct pciserial_board *board,
 111                                 struct uart_port *port, int idx)
 112 {
 113         unsigned int bar = 0, offset = board->first_offset;
 114         bar = FL_GET_BASE(board->flags);
 115
 116         if (idx < 2) {
 117                 offset += idx * board->uart_offset;
 118         } else if ((idx >= 2) && (idx < 4)) {
 119                 bar += 1;
 120                 offset += ((idx - 2) * board->uart_offset);
 121         } else if ((idx >= 4) && (idx < 6)) {
 122                 bar += 2;
 123                 offset += ((idx - 4) * board->uart_offset);
 124         } else if (idx >= 6) {
 125                 bar += 3;
 126                 offset += ((idx - 6) * board->uart_offset);
 127         }
 128
 129         return setup_port(priv, port, bar, offset, board->reg_shift);
 130 }
 131
 132 /*
 133  * AFAVLAB uses a different mixture of BARs and offsets
 134  * Not that ugly ;) -- HW
 135  */
 136 static int
 137 afavlab_setup(struct serial_private *priv, struct pciserial_board *board,
 138               struct uart_port *port, int idx)
 139 {
 140         unsigned int bar, offset = board->first_offset;
 141
 142         bar = FL_GET_BASE(board->flags);
 143         if (idx < 4)
 144                 bar += idx;
 145         else {
 146                 bar = 4;
 147                 offset += (idx - 4) * board->uart_offset;
 148         }
 149
 150         return setup_port(priv, port, bar, offset, board->reg_shift);
 151 }
 152
 153 /*
 154  * HP's Remote Management Console.  The Diva chip came in several
 155  * different versions.  N-class, L2000 and A500 have two Diva chips, each
 156  * with 3 UARTs (the third UART on the second chip is unused).  Superdome
 157  * and Keystone have one Diva chip with 3 UARTs.  Some later machines have
 158  * one Diva chip, but it has been expanded to 5 UARTs.
 159  */
 160 static int pci_hp_diva_init(struct pci_dev *dev)
 161 {
 162         int rc = 0;
 163
 164         switch (dev->subsystem_device) {
 165         case PCI_DEVICE_ID_HP_DIVA_TOSCA1:
 166         case PCI_DEVICE_ID_HP_DIVA_HALFDOME:
 167         case PCI_DEVICE_ID_HP_DIVA_KEYSTONE:
 168         case PCI_DEVICE_ID_HP_DIVA_EVEREST:
 169                 rc = 3;
 170                 break;
 171         case PCI_DEVICE_ID_HP_DIVA_TOSCA2:
 172                 rc = 2;
 173                 break;
 174         case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
 175                 rc = 4;
 176                 break;
 177         case PCI_DEVICE_ID_HP_DIVA_POWERBAR:
 178         case PCI_DEVICE_ID_HP_DIVA_HURRICANE:
 179                 rc = 1;
 180                 break;
 181         }
 182
 183         return rc;
 184 }
 185
 186 /*
 187  * HP's Diva chip puts the 4th/5th serial port further out, and
 188  * some serial ports are supposed to be hidden on certain models.
 189  */
 190 static int
 191 pci_hp_diva_setup(struct serial_private *priv, struct pciserial_board *board,
 192               struct uart_port *port, int idx)
 193 {
 194         unsigned int offset = board->first_offset;
 195         unsigned int bar = FL_GET_BASE(board->flags);
 196
 197         switch (priv->dev->subsystem_device) {
 198         case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
 199                 if (idx == 3)
 200                         idx++;
 201                 break;
 202         case PCI_DEVICE_ID_HP_DIVA_EVEREST:
 203                 if (idx > 0)
 204                         idx++;
 205                 if (idx > 2)
 206                         idx++;
 207                 break;
 208         }
 209         if (idx > 2)
 210                 offset = 0x18;
 211
 212         offset += idx * board->uart_offset;
 213
 214         return setup_port(priv, port, bar, offset, board->reg_shift);
 215 }
 216
 217 /*
 218  * Added for EKF Intel i960 serial boards
 219  */
 220 static int pci_inteli960ni_init(struct pci_dev *dev)
 221 {
 222         unsigned long oldval;
 223
 224         if (!(dev->subsystem_device & 0x1000))
 225                 return -ENODEV;
 226
 227         /* is firmware started? */
 228         pci_read_config_dword(dev, 0x44, (void *)&oldval);
 229         if (oldval == 0x00001000L) { /* RESET value */
 230                 printk(KERN_DEBUG "Local i960 firmware missing");
 231                 return -ENODEV;
 232         }
 233         return 0;
 234 }
 235
 236 /*
 237  * Some PCI serial cards using the PLX 9050 PCI interface chip require
 238  * that the card interrupt be explicitly enabled or disabled.  This
 239  * seems to be mainly needed on card using the PLX which also use I/O
 240  * mapped memory.
 241  */
 242 static int pci_plx9050_init(struct pci_dev *dev)
 243 {
 244         u8 irq_config;
 245         void __iomem *p;
 246
 247         if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) {
 248                 moan_device("no memory in bar 0", dev);
 249                 return 0;
 250         }
 251
 252         irq_config = 0x41;
 253         if (dev->vendor == PCI_VENDOR_ID_PANACOM ||
 254             dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS)
 255                 irq_config = 0x43;
 256
 257         if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
 258             (dev->device == PCI_DEVICE_ID_PLX_ROMULUS))
 259                 /*
 260                  * As the megawolf cards have the int pins active
 261                  * high, and have 2 UART chips, both ints must be
 262                  * enabled on the 9050. Also, the UARTS are set in
 263                  * 16450 mode by default, so we have to enable the
 264                  * 16C950 'enhanced' mode so that we can use the
 265                  * deep FIFOs
 266                  */
 267                 irq_config = 0x5b;
 268         /*
 269          * enable/disable interrupts
 270          */
 271         p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
 272         if (p == NULL)
 273                 return -ENOMEM;
 274         writel(irq_config, p + 0x4c);
 275
 276         /*
 277          * Read the register back to ensure that it took effect.
 278          */
 279         readl(p + 0x4c);
 280         iounmap(p);
 281
 282         return 0;
 283 }
 284
 285 static void __devexit pci_plx9050_exit(struct pci_dev *dev)
 286 {
 287         u8 __iomem *p;
 288
 289         if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0)
 290                 return;
 291
 292         /*
 293          * disable interrupts
 294          */
 295         p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
 296         if (p != NULL) {
 297                 writel(0, p + 0x4c);
 298
 299                 /*
 300                  * Read the register back to ensure that it took effect.
 301                  */
 302                 readl(p + 0x4c);
 303                 iounmap(p);
 304         }
 305 }
 306
 307 /* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
 308 static int
 309 sbs_setup(struct serial_private *priv, struct pciserial_board *board,
 310                 struct uart_port *port, int idx)
 311 {
 312         unsigned int bar, offset = board->first_offset;
 313
 314         bar = 0;
 315
 316         if (idx < 4) {
 317                 /* first four channels map to 0, 0x100, 0x200, 0x300 */
 318                 offset += idx * board->uart_offset;
 319         } else if (idx < 8) {
 320                 /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */
 321                 offset += idx * board->uart_offset + 0xC00;
 322         } else /* we have only 8 ports on PMC-OCTALPRO */
 323                 return 1;
 324
 325         return setup_port(priv, port, bar, offset, board->reg_shift);
 326 }
 327
 328 /*
 329 * This does initialization for PMC OCTALPRO cards:
 330 * maps the device memory, resets the UARTs (needed, bc
 331 * if the module is removed and inserted again, the card
 332 * is in the sleep mode) and enables global interrupt.
 333 */
 334
 335 /* global control register offset for SBS PMC-OctalPro */
 336 #define OCT_REG_CR_OFF          0x500
 337
 338 static int sbs_init(struct pci_dev *dev)
 339 {
 340         u8 __iomem *p;
 341
 342         p = ioremap_nocache(pci_resource_start(dev, 0),
 343                                                 pci_resource_len(dev, 0));
 344
 345         if (p == NULL)
 346                 return -ENOMEM;
 347         /* Set bit-4 Control Register (UART RESET) in to reset the uarts */
 348         writeb(0x10, p + OCT_REG_CR_OFF);
 349         udelay(50);
 350         writeb(0x0, p + OCT_REG_CR_OFF);
 351
 352         /* Set bit-2 (INTENABLE) of Control Register */
 353         writeb(0x4, p + OCT_REG_CR_OFF);
 354         iounmap(p);
 355
 356         return 0;
 357 }
 358
 359 /*
 360  * Disables the global interrupt of PMC-OctalPro
 361  */
 362
 363 static void __devexit sbs_exit(struct pci_dev *dev)
 364 {
 365         u8 __iomem *p;
 366
 367         p = ioremap_nocache(pci_resource_start(dev, 0),
 368                                         pci_resource_len(dev, 0));
 369         /* FIXME: What if resource_len < OCT_REG_CR_OFF */
 370         if (p != NULL)
 371                 writeb(0, p + OCT_REG_CR_OFF);
 372         iounmap(p);
 373 }
 374
 375 /*
 376  * SIIG serial cards have an PCI interface chip which also controls
 377  * the UART clocking frequency. Each UART can be clocked independently
 378  * (except cards equiped with 4 UARTs) and initial clocking settings
 379  * are stored in the EEPROM chip. It can cause problems because this
 380  * version of serial driver doesn't support differently clocked UART's
 381  * on single PCI card. To prevent this, initialization functions set
 382  * high frequency clocking for all UART's on given card. It is safe (I
 383  * hope) because it doesn't touch EEPROM settings to prevent conflicts
 384  * with other OSes (like M$ DOS).
 385  *
 386  *  SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999
 387  *
 388  * There is two family of SIIG serial cards with different PCI
 389  * interface chip and different configuration methods:
 390  *     - 10x cards have control registers in IO and/or memory space;
 391  *     - 20x cards have control registers in standard PCI configuration space.
 392  *
 393  * Note: all 10x cards have PCI device ids 0x10..
 394  *       all 20x cards have PCI device ids 0x20..
 395  *
 396  * There are also Quartet Serial cards which use Oxford Semiconductor
 397  * 16954 quad UART PCI chip clocked by 18.432 MHz quartz.
 398  *
 399  * Note: some SIIG cards are probed by the parport_serial object.
 400  */
 401
 402 #define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
 403 #define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
 404
 405 static int pci_siig10x_init(struct pci_dev *dev)
 406 {
 407         u16 data;
 408         void __iomem *p;
 409
 410         switch (dev->device & 0xfff8) {
 411         case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */
 412                 data = 0xffdf;
 413                 break;
 414         case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */
 415                 data = 0xf7ff;
 416                 break;
 417         default:                        /* 1S1P, 4S */
 418                 data = 0xfffb;
 419                 break;
 420         }
 421
 422         p = ioremap_nocache(pci_resource_start(dev, 0), 0x80);
 423         if (p == NULL)
 424                 return -ENOMEM;
 425
 426         writew(readw(p + 0x28) & data, p + 0x28);
 427         readw(p + 0x28);
 428         iounmap(p);
 429         return 0;
 430 }
 431
 432 #define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
 433 #define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
 434
 435 static int pci_siig20x_init(struct pci_dev *dev)
 436 {
 437         u8 data;
 438
 439         /* Change clock frequency for the first UART. */
 440         pci_read_config_byte(dev, 0x6f, &data);
 441         pci_write_config_byte(dev, 0x6f, data & 0xef);
 442
 443         /* If this card has 2 UART, we have to do the same with second UART. */
 444         if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) ||
 445             ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) {
 446                 pci_read_config_byte(dev, 0x73, &data);
 447                 pci_write_config_byte(dev, 0x73, data & 0xef);
 448         }
 449         return 0;
 450 }
 451
 452 static int pci_siig_init(struct pci_dev *dev)
 453 {
 454         unsigned int type = dev->device & 0xff00;
 455
 456         if (type == 0x1000)
 457                 return pci_siig10x_init(dev);
 458         else if (type == 0x2000)
 459                 return pci_siig20x_init(dev);
 460
 461         moan_device("Unknown SIIG card", dev);
 462         return -ENODEV;
 463 }
 464
 465 static int pci_siig_setup(struct serial_private *priv,
 466                           struct pciserial_board *board,
 467                           struct uart_port *port, int idx)
 468 {
 469         unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0;
 470
 471         if (idx > 3) {
 472                 bar = 4;
 473                 offset = (idx - 4) * 8;
 474         }
 475
 476         return setup_port(priv, port, bar, offset, 0);
 477 }
 478
 479 /*
 480  * Timedia has an explosion of boards, and to avoid the PCI table from
 481  * growing *huge*, we use this function to collapse some 70 entries
 482  * in the PCI table into one, for sanity's and compactness's sake.
 483  */
 484 static const unsigned short timedia_single_port[] = {
 485         0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0
 486 };
 487
 488 static const unsigned short timedia_dual_port[] = {
 489         0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
 490         0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
 491         0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
 492         0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
 493         0xD079, 0
 494 };
 495
 496 static const unsigned short timedia_quad_port[] = {
 497         0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
 498         0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
 499         0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
 500         0xB157, 0
 501 };
 502
 503 static const unsigned short timedia_eight_port[] = {
 504         0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
 505         0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
 506 };
 507
 508 static const struct timedia_struct {
 509         int num;
 510         const unsigned short *ids;
 511 } timedia_data[] = {
 512         { 1, timedia_single_port },
 513         { 2, timedia_dual_port },
 514         { 4, timedia_quad_port },
 515         { 8, timedia_eight_port }
 516 };
 517
 518 static int pci_timedia_init(struct pci_dev *dev)
 519 {
 520         const unsigned short *ids;
 521         int i, j;
 522
 523         for (i = 0; i < ARRAY_SIZE(timedia_data); i++) {
 524                 ids = timedia_data[i].ids;
 525                 for (j = 0; ids[j]; j++)
 526                         if (dev->subsystem_device == ids[j])
 527                                 return timedia_data[i].num;
 528         }
 529         return 0;
 530 }
 531
 532 /*
 533  * Timedia/SUNIX uses a mixture of BARs and offsets
 534  * Ugh, this is ugly as all hell --- TYT
 535  */
 536 static int
 537 pci_timedia_setup(struct serial_private *priv, struct pciserial_board *board,
 538                   struct uart_port *port, int idx)
 539 {
 540         unsigned int bar = 0, offset = board->first_offset;
 541
 542         switch (idx) {
 543         case 0:
 544                 bar = 0;
 545                 break;
 546         case 1:
 547                 offset = board->uart_offset;
 548                 bar = 0;
 549                 break;
 550         case 2:
 551                 bar = 1;
 552                 break;
 553         case 3:
 554                 offset = board->uart_offset;
 555                 /* FALLTHROUGH */
 556         case 4: /* BAR 2 */
 557         case 5: /* BAR 3 */
 558         case 6: /* BAR 4 */
 559         case 7: /* BAR 5 */
 560                 bar = idx - 2;
 561         }
 562
 563         return setup_port(priv, port, bar, offset, board->reg_shift);
 564 }
 565
 566 /*
 567  * Some Titan cards are also a little weird
 568  */
 569 static int
 570 titan_400l_800l_setup(struct serial_private *priv,
 571                       struct pciserial_board *board,
 572                       struct uart_port *port, int idx)
 573 {
 574         unsigned int bar, offset = board->first_offset;
 575
 576         switch (idx) {
 577         case 0:
 578                 bar = 1;
 579                 break;
 580         case 1:
 581                 bar = 2;
 582                 break;
 583         default:
 584                 bar = 4;
 585                 offset = (idx - 2) * board->uart_offset;
 586         }
 587
 588         return setup_port(priv, port, bar, offset, board->reg_shift);
 589 }
 590
 591 static int pci_xircom_init(struct pci_dev *dev)
 592 {
 593         msleep(100);
 594         return 0;
 595 }
 596
 597 static int pci_netmos_init(struct pci_dev *dev)
 598 {
 599         /* subdevice 0x00PS means <P> parallel, <S> serial */
 600         unsigned int num_serial = dev->subsystem_device & 0xf;
 601
 602         if (num_serial == 0)
 603                 return -ENODEV;
 604         return num_serial;
 605 }
 606
 607 /*
 608  * ITE support by Niels de Vos <niels.devos@wincor-nixdorf.com>
 609  *
 610  * These chips are available with optionally one parallel port and up to
 611  * two serial ports. Unfortunately they all have the same product id.
 612  *
 613  * Basic configuration is done over a region of 32 I/O ports. The base
 614  * ioport is called INTA or INTC, depending on docs/other drivers.
 615  *
 616  * The region of the 32 I/O ports is configured in POSIO0R...
 617  */
 618
 619 /* registers */
 620 #define ITE_887x_MISCR          0x9c
 621 #define ITE_887x_INTCBAR        0x78
 622 #define ITE_887x_UARTBAR        0x7c
 623 #define ITE_887x_PS0BAR         0x10
 624 #define ITE_887x_POSIO0         0x60
 625
 626 /* I/O space size */
 627 #define ITE_887x_IOSIZE         32
 628 /* I/O space size (bits 26-24; 8 bytes = 011b) */
 629 #define ITE_887x_POSIO_IOSIZE_8         (3 << 24)
 630 /* I/O space size (bits 26-24; 32 bytes = 101b) */
 631 #define ITE_887x_POSIO_IOSIZE_32        (5 << 24)
 632 /* Decoding speed (1 = slow, 2 = medium, 3 = fast) */
 633 #define ITE_887x_POSIO_SPEED            (3 << 29)
 634 /* enable IO_Space bit */
 635 #define ITE_887x_POSIO_ENABLE           (1 << 31)
 636
 637 static int pci_ite887x_init(struct pci_dev *dev)
 638 {
 639         /* inta_addr are the configuration addresses of the ITE */
 640         static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0,
 641                                                         0x200, 0x280, 0 };
 642         int ret, i, type;
 643         struct resource *iobase = NULL;
 644         u32 miscr, uartbar, ioport;
 645
 646         /* search for the base-ioport */
 647         i = 0;
 648         while (inta_addr[i] && iobase == NULL) {
 649                 iobase = request_region(inta_addr[i], ITE_887x_IOSIZE,
 650                                                                 "ite887x");
 651                 if (iobase != NULL) {
 652                         /* write POSIO0R - speed | size | ioport */
 653                         pci_write_config_dword(dev, ITE_887x_POSIO0,
 654                                 ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
 655                                 ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]);
 656                         /* write INTCBAR - ioport */
 657                         pci_write_config_dword(dev, ITE_887x_INTCBAR,
 658                                                                 inta_addr[i]);
 659                         ret = inb(inta_addr[i]);
 660                         if (ret != 0xff) {
 661                                 /* ioport connected */
 662                                 break;
 663                         }
 664                         release_region(iobase->start, ITE_887x_IOSIZE);
 665                         iobase = NULL;
 666                 }
 667                 i++;
 668         }
 669
 670         if (!inta_addr[i]) {
 671                 printk(KERN_ERR "ite887x: could not find iobase\n");
 672                 return -ENODEV;
 673         }
 674
 675         /* start of undocumented type checking (see parport_pc.c) */
 676         type = inb(iobase->start + 0x18) & 0x0f;
 677
 678         switch (type) {
 679         case 0x2:       /* ITE8871 (1P) */
 680         case 0xa:       /* ITE8875 (1P) */
 681                 ret = 0;
 682                 break;
 683         case 0xe:       /* ITE8872 (2S1P) */
 684                 ret = 2;
 685                 break;
 686         case 0x6:       /* ITE8873 (1S) */
 687                 ret = 1;
 688                 break;
 689         case 0x8:       /* ITE8874 (2S) */
 690                 ret = 2;
 691                 break;
 692         default:
 693                 moan_device("Unknown ITE887x", dev);
 694                 ret = -ENODEV;
 695         }
 696
 697         /* configure all serial ports */
 698         for (i = 0; i < ret; i++) {
 699                 /* read the I/O port from the device */
 700                 pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)),
 701                                                                 &ioport);
 702                 ioport &= 0x0000FF00;   /* the actual base address */
 703                 pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)),
 704                         ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
 705                         ITE_887x_POSIO_IOSIZE_8 | ioport);
 706
 707                 /* write the ioport to the UARTBAR */
 708                 pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar);
 709                 uartbar &= ~(0xffff << (16 * i));       /* clear half the reg */
 710                 uartbar |= (ioport << (16 * i));        /* set the ioport */
 711                 pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar);
 712
 713                 /* get current config */
 714                 pci_read_config_dword(dev, ITE_887x_MISCR, &miscr);
 715                 /* disable interrupts (UARTx_Routing[3:0]) */
 716                 miscr &= ~(0xf << (12 - 4 * i));
 717                 /* activate the UART (UARTx_En) */
 718                 miscr |= 1 << (23 - i);
 719                 /* write new config with activated UART */
 720                 pci_write_config_dword(dev, ITE_887x_MISCR, miscr);
 721         }
 722
 723         if (ret <= 0) {
 724                 /* the device has no UARTs if we get here */
 725                 release_region(iobase->start, ITE_887x_IOSIZE);
 726         }
 727
 728         return ret;
 729 }
 730
 731 static void __devexit pci_ite887x_exit(struct pci_dev *dev)
 732 {
 733         u32 ioport;
 734         /* the ioport is bit 0-15 in POSIO0R */
 735         pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport);
 736         ioport &= 0xffff;
 737         release_region(ioport, ITE_887x_IOSIZE);
 738 }
 739
 740 static int
 741 pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
 742                   struct uart_port *port, int idx)
 743 {
 744         unsigned int bar, offset = board->first_offset, maxnr;
 745
 746         bar = FL_GET_BASE(board->flags);
 747         if (board->flags & FL_BASE_BARS)
 748                 bar += idx;
 749         else
 750                 offset += idx * board->uart_offset;
 751
 752         maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
 753                 (board->reg_shift + 3);
 754
 755         if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
 756                 return 1;
 757
 758         return setup_port(priv, port, bar, offset, board->reg_shift);
 759 }
 760
 761 /* This should be in linux/pci_ids.h */
 762 #define PCI_VENDOR_ID_SBSMODULARIO      0x124B
 763 #define PCI_SUBVENDOR_ID_SBSMODULARIO   0x124B
 764 #define PCI_DEVICE_ID_OCTPRO            0x0001
 765 #define PCI_SUBDEVICE_ID_OCTPRO232      0x0108
 766 #define PCI_SUBDEVICE_ID_OCTPRO422      0x0208
 767 #define PCI_SUBDEVICE_ID_POCTAL232      0x0308
 768 #define PCI_SUBDEVICE_ID_POCTAL422      0x0408
 769
 770 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 771 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
 772
 773 /*
 774  * Master list of serial port init/setup/exit quirks.
 775  * This does not describe the general nature of the port.
 776  * (ie, baud base, number and location of ports, etc)
 777  *
 778  * This list is ordered alphabetically by vendor then device.
 779  * Specific entries must come before more generic entries.
 780  */
 781 static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 782         /*
 783         * ADDI-DATA GmbH communication cards <info@addi-data.com>
 784         */
 785         {
 786                 .vendor         = PCI_VENDOR_ID_ADDIDATA_OLD,
 787                 .device         = PCI_DEVICE_ID_ADDIDATA_APCI7800,
 788                 .subvendor      = PCI_ANY_ID,
 789                 .subdevice      = PCI_ANY_ID,
 790                 .setup          = addidata_apci7800_setup,
 791         },
 792         /*
 793          * AFAVLAB cards - these may be called via parport_serial
 794          *  It is not clear whether this applies to all products.
 795          */
 796         {
 797                 .vendor         = PCI_VENDOR_ID_AFAVLAB,
 798                 .device         = PCI_ANY_ID,
 799                 .subvendor      = PCI_ANY_ID,
 800                 .subdevice      = PCI_ANY_ID,
 801                 .setup          = afavlab_setup,
 802         },
 803         /*
 804          * HP Diva
 805          */
 806         {
 807                 .vendor         = PCI_VENDOR_ID_HP,
 808                 .device         = PCI_DEVICE_ID_HP_DIVA,
 809                 .subvendor      = PCI_ANY_ID,
 810                 .subdevice      = PCI_ANY_ID,
 811                 .init           = pci_hp_diva_init,
 812                 .setup          = pci_hp_diva_setup,
 813         },
 814         /*
 815          * Intel
 816          */
 817         {
 818                 .vendor         = PCI_VENDOR_ID_INTEL,
 819                 .device         = PCI_DEVICE_ID_INTEL_80960_RP,
 820                 .subvendor      = 0xe4bf,
 821                 .subdevice      = PCI_ANY_ID,
 822                 .init           = pci_inteli960ni_init,
 823                 .setup          = pci_default_setup,
 824         },
 825         /*
 826          * ITE
 827          */
 828         {
 829                 .vendor         = PCI_VENDOR_ID_ITE,
 830                 .device         = PCI_DEVICE_ID_ITE_8872,
 831                 .subvendor      = PCI_ANY_ID,
 832                 .subdevice      = PCI_ANY_ID,
 833                 .init           = pci_ite887x_init,
 834                 .setup          = pci_default_setup,
 835                 .exit           = __devexit_p(pci_ite887x_exit),
 836         },
 837         /*
 838          * Panacom
 839          */
 840         {
 841                 .vendor         = PCI_VENDOR_ID_PANACOM,
 842                 .device         = PCI_DEVICE_ID_PANACOM_QUADMODEM,
 843                 .subvendor      = PCI_ANY_ID,
 844                 .subdevice      = PCI_ANY_ID,
 845                 .init           = pci_plx9050_init,
 846                 .setup          = pci_default_setup,
 847                 .exit           = __devexit_p(pci_plx9050_exit),
 848         },
 849         {
 850                 .vendor         = PCI_VENDOR_ID_PANACOM,
 851                 .device         = PCI_DEVICE_ID_PANACOM_DUALMODEM,
 852                 .subvendor      = PCI_ANY_ID,
 853                 .subdevice      = PCI_ANY_ID,
 854                 .init           = pci_plx9050_init,
 855                 .setup          = pci_default_setup,
 856                 .exit           = __devexit_p(pci_plx9050_exit),
 857         },
 858         /*
 859          * PLX
 860          */
 861         {
 862                 .vendor         = PCI_VENDOR_ID_PLX,
 863                 .device         = PCI_DEVICE_ID_PLX_9030,
 864                 .subvendor      = PCI_SUBVENDOR_ID_PERLE,
 865                 .subdevice      = PCI_ANY_ID,
 866                 .setup          = pci_default_setup,
 867         },
 868         {
 869                 .vendor         = PCI_VENDOR_ID_PLX,
 870                 .device         = PCI_DEVICE_ID_PLX_9050,
 871                 .subvendor      = PCI_SUBVENDOR_ID_EXSYS,
 872                 .subdevice      = PCI_SUBDEVICE_ID_EXSYS_4055,
 873                 .init           = pci_plx9050_init,
 874                 .setup          = pci_default_setup,
 875                 .exit           = __devexit_p(pci_plx9050_exit),
 876         },
 877         {
 878                 .vendor         = PCI_VENDOR_ID_PLX,
 879                 .device         = PCI_DEVICE_ID_PLX_9050,
 880                 .subvendor      = PCI_SUBVENDOR_ID_KEYSPAN,
 881                 .subdevice      = PCI_SUBDEVICE_ID_KEYSPAN_SX2,
 882                 .init           = pci_plx9050_init,
 883                 .setup          = pci_default_setup,
 884                 .exit           = __devexit_p(pci_plx9050_exit),
 885         },
 886         {
 887                 .vendor         = PCI_VENDOR_ID_PLX,
 888                 .device         = PCI_DEVICE_ID_PLX_9050,
 889                 .subvendor      = PCI_VENDOR_ID_PLX,
 890                 .subdevice      = PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
 891                 .init           = pci_plx9050_init,
 892                 .setup          = pci_default_setup,
 893                 .exit           = __devexit_p(pci_plx9050_exit),
 894         },
 895         {
 896                 .vendor         = PCI_VENDOR_ID_PLX,
 897                 .device         = PCI_DEVICE_ID_PLX_ROMULUS,
 898                 .subvendor      = PCI_VENDOR_ID_PLX,
 899                 .subdevice      = PCI_DEVICE_ID_PLX_ROMULUS,
 900                 .init           = pci_plx9050_init,
 901                 .setup          = pci_default_setup,
 902                 .exit           = __devexit_p(pci_plx9050_exit),
 903         },
 904         /*
 905          * SBS Technologies, Inc., PMC-OCTALPRO 232
 906          */
 907         {
 908                 .vendor         = PCI_VENDOR_ID_SBSMODULARIO,
 909                 .device         = PCI_DEVICE_ID_OCTPRO,
 910                 .subvendor      = PCI_SUBVENDOR_ID_SBSMODULARIO,
 911                 .subdevice      = PCI_SUBDEVICE_ID_OCTPRO232,
 912                 .init           = sbs_init,
 913                 .setup          = sbs_setup,
 914                 .exit           = __devexit_p(sbs_exit),
 915         },
 916         /*
 917          * SBS Technologies, Inc., PMC-OCTALPRO 422
 918          */
 919         {
 920                 .vendor         = PCI_VENDOR_ID_SBSMODULARIO,
 921                 .device         = PCI_DEVICE_ID_OCTPRO,
 922                 .subvendor      = PCI_SUBVENDOR_ID_SBSMODULARIO,
 923                 .subdevice      = PCI_SUBDEVICE_ID_OCTPRO422,
 924                 .init           = sbs_init,
 925                 .setup          = sbs_setup,
 926                 .exit           = __devexit_p(sbs_exit),
 927         },
 928         /*
 929          * SBS Technologies, Inc., P-Octal 232
 930          */
 931         {
 932                 .vendor         = PCI_VENDOR_ID_SBSMODULARIO,
 933                 .device         = PCI_DEVICE_ID_OCTPRO,
 934                 .subvendor      = PCI_SUBVENDOR_ID_SBSMODULARIO,
 935                 .subdevice      = PCI_SUBDEVICE_ID_POCTAL232,
 936                 .init           = sbs_init,
 937                 .setup          = sbs_setup,
 938                 .exit           = __devexit_p(sbs_exit),
 939         },
 940         /*
 941          * SBS Technologies, Inc., P-Octal 422
 942          */
 943         {
 944                 .vendor         = PCI_VENDOR_ID_SBSMODULARIO,
 945                 .device         = PCI_DEVICE_ID_OCTPRO,
 946                 .subvendor      = PCI_SUBVENDOR_ID_SBSMODULARIO,
 947                 .subdevice      = PCI_SUBDEVICE_ID_POCTAL422,
 948                 .init           = sbs_init,
 949                 .setup          = sbs_setup,
 950                 .exit           = __devexit_p(sbs_exit),
 951         },
 952         /*
 953          * SIIG cards - these may be called via parport_serial
 954          */
 955         {
 956                 .vendor         = PCI_VENDOR_ID_SIIG,
 957                 .device         = PCI_ANY_ID,
 958                 .subvendor      = PCI_ANY_ID,
 959                 .subdevice      = PCI_ANY_ID,
 960                 .init           = pci_siig_init,
 961                 .setup          = pci_siig_setup,
 962         },
 963         /*
 964          * Titan cards
 965          */
 966         {
 967                 .vendor         = PCI_VENDOR_ID_TITAN,
 968                 .device         = PCI_DEVICE_ID_TITAN_400L,
 969                 .subvendor      = PCI_ANY_ID,
 970                 .subdevice      = PCI_ANY_ID,
 971                 .setup          = titan_400l_800l_setup,
 972         },
 973         {
 974                 .vendor         = PCI_VENDOR_ID_TITAN,
 975                 .device         = PCI_DEVICE_ID_TITAN_800L,
 976                 .subvendor      = PCI_ANY_ID,
 977                 .subdevice      = PCI_ANY_ID,
 978                 .setup          = titan_400l_800l_setup,
 979         },
 980         /*
 981          * Timedia cards
 982          */
 983         {
 984                 .vendor         = PCI_VENDOR_ID_TIMEDIA,
 985                 .device         = PCI_DEVICE_ID_TIMEDIA_1889,
 986                 .subvendor      = PCI_VENDOR_ID_TIMEDIA,
 987                 .subdevice      = PCI_ANY_ID,
 988                 .init           = pci_timedia_init,
 989                 .setup          = pci_timedia_setup,
 990         },
 991         {
 992                 .vendor         = PCI_VENDOR_ID_TIMEDIA,
 993                 .device         = PCI_ANY_ID,
 994                 .subvendor      = PCI_ANY_ID,
 995                 .subdevice      = PCI_ANY_ID,
 996                 .setup          = pci_timedia_setup,
 997         },
 998         /*
 999          * Xircom cards
1000          */
1001         {
1002                 .vendor         = PCI_VENDOR_ID_XIRCOM,
1003                 .device         = PCI_DEVICE_ID_XIRCOM_X3201_MDM,
1004                 .subvendor      = PCI_ANY_ID,
1005                 .subdevice      = PCI_ANY_ID,
1006                 .init           = pci_xircom_init,
1007                 .setup          = pci_default_setup,
1008         },
1009         /*
1010          * Netmos cards - these may be called via parport_serial
1011          */
1012         {
1013                 .vendor         = PCI_VENDOR_ID_NETMOS,
1014                 .device         = PCI_ANY_ID,
1015                 .subvendor      = PCI_ANY_ID,
1016                 .subdevice      = PCI_ANY_ID,
1017                 .init           = pci_netmos_init,
1018                 .setup          = pci_default_setup,
1019         },
1020         /*
1021          * Default "match everything" terminator entry
1022          */
1023         {
1024                 .vendor         = PCI_ANY_ID,
1025                 .device         = PCI_ANY_ID,
1026                 .subvendor      = PCI_ANY_ID,
1027                 .subdevice      = PCI_ANY_ID,
1028                 .setup          = pci_default_setup,
1029         }
1030 };
1031
1032 static inline int quirk_id_matches(u32 quirk_id, u32 dev_id)
1033 {
1034         return quirk_id == PCI_ANY_ID || quirk_id == dev_id;
1035 }
1036
1037 static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
1038 {
1039         struct pci_serial_quirk *quirk;
1040
1041         for (quirk = pci_serial_quirks; ; quirk++)
1042                 if (quirk_id_matches(quirk->vendor, dev->vendor) &&
1043                     quirk_id_matches(quirk->device, dev->device) &&
1044                     quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) &&
1045                     quirk_id_matches(quirk->subdevice, dev->subsystem_device))
1046                         break;
1047         return quirk;
1048 }
1049
1050 static inline int get_pci_irq(struct pci_dev *dev,
1051                                 struct pciserial_board *board)
1052 {
1053         if (board->flags & FL_NOIRQ)
1054                 return 0;
1055         else
1056                 return dev->irq;
1057 }
1058
1059 /*
1060  * This is the configuration table for all of the PCI serial boards
1061  * which we support.  It is directly indexed by the pci_board_num_t enum
1062  * value, which is encoded in the pci_device_id PCI probe table's
1063  * driver_data member.
1064  *
1065  * The makeup of these names are:
1066  *  pbn_bn{_bt}_n_baud{_offsetinhex}
1067  *
1068  *  bn          = PCI BAR number
1069  *  bt          = Index using PCI BARs
1070  *  n           = number of serial ports
1071  *  baud        = baud rate
1072  *  offsetinhex = offset for each sequential port (in hex)
1073  *
1074  * This table is sorted by (in order): bn, bt, baud, offsetindex, n.
1075  *
1076  * Please note: in theory if n = 1, _bt infix should make no difference.
1077  * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200
1078  */
1079 enum pci_board_num_t {
1080         pbn_default = 0,
1081
1082         pbn_b0_1_115200,
1083         pbn_b0_2_115200,
1084         pbn_b0_4_115200,
1085         pbn_b0_5_115200,
1086         pbn_b0_8_115200,
1087
1088         pbn_b0_1_921600,
1089         pbn_b0_2_921600,
1090         pbn_b0_4_921600,
1091
1092         pbn_b0_2_1130000,
1093
1094         pbn_b0_4_1152000,
1095
1096         pbn_b0_2_1843200,
1097         pbn_b0_4_1843200,
1098
1099         pbn_b0_2_1843200_200,
1100         pbn_b0_4_1843200_200,
1101         pbn_b0_8_1843200_200,
1102
1103         pbn_b0_1_4000000,
1104
1105         pbn_b0_bt_1_115200,
1106         pbn_b0_bt_2_115200,
1107         pbn_b0_bt_8_115200,
1108
1109         pbn_b0_bt_1_460800,
1110         pbn_b0_bt_2_460800,
1111         pbn_b0_bt_4_460800,
1112
1113         pbn_b0_bt_1_921600,
1114         pbn_b0_bt_2_921600,
1115         pbn_b0_bt_4_921600,
1116         pbn_b0_bt_8_921600,
1117
1118         pbn_b1_1_115200,
1119         pbn_b1_2_115200,
1120         pbn_b1_4_115200,
1121         pbn_b1_8_115200,
1122
1123         pbn_b1_1_921600,
1124         pbn_b1_2_921600,
1125         pbn_b1_4_921600,
1126         pbn_b1_8_921600,
1127
1128         pbn_b1_2_1250000,
1129
1130         pbn_b1_bt_1_115200,
1131         pbn_b1_bt_2_921600,
1132
1133         pbn_b1_1_1382400,
1134         pbn_b1_2_1382400,
1135         pbn_b1_4_1382400,
1136         pbn_b1_8_1382400,
1137
1138         pbn_b2_1_115200,
1139         pbn_b2_2_115200,
1140         pbn_b2_4_115200,
1141         pbn_b2_8_115200,
1142
1143         pbn_b2_1_460800,
1144         pbn_b2_4_460800,
1145         pbn_b2_8_460800,
1146         pbn_b2_16_460800,
1147
1148         pbn_b2_1_921600,
1149         pbn_b2_4_921600,
1150         pbn_b2_8_921600,
1151
1152         pbn_b2_bt_1_115200,
1153         pbn_b2_bt_2_115200,
1154         pbn_b2_bt_4_115200,
1155
1156         pbn_b2_bt_2_921600,
1157         pbn_b2_bt_4_921600,
1158
1159         pbn_b3_2_115200,
1160         pbn_b3_4_115200,
1161         pbn_b3_8_115200,
1162
1163         /*
1164          * Board-specific versions.
1165          */
1166         pbn_panacom,
1167         pbn_panacom2,
1168         pbn_panacom4,
1169         pbn_exsys_4055,
1170         pbn_plx_romulus,
1171         pbn_oxsemi,
1172         pbn_oxsemi_1_4000000,
1173         pbn_oxsemi_2_4000000,
1174         pbn_oxsemi_4_4000000,
1175         pbn_oxsemi_8_4000000,
1176         pbn_intel_i960,
1177         pbn_sgi_ioc3,
1178         pbn_computone_4,
1179         pbn_computone_6,
1180         pbn_computone_8,
1181         pbn_sbsxrsio,
1182         pbn_exar_XR17C152,
1183         pbn_exar_XR17C154,
1184         pbn_exar_XR17C158,
1185         pbn_pasemi_1682M,
1186 };
1187
1188 /*
1189  * uart_offset - the space between channels
1190  * reg_shift   - describes how the UART registers are mapped
1191  *               to PCI memory by the card.
1192  * For example IER register on SBS, Inc. PMC-OctPro is located at
1193  * offset 0x10 from the UART base, while UART_IER is defined as 1
1194  * in include/linux/serial_reg.h,
1195  * see first lines of serial_in() and serial_out() in 8250.c
1196 */
1197
1198 static struct pciserial_board pci_boards[] __devinitdata = {
1199         [pbn_default] = {
1200                 .flags          = FL_BASE0,
1201                 .num_ports      = 1,
1202                 .base_baud      = 115200,
1203                 .uart_offset    = 8,
1204         },
1205         [pbn_b0_1_115200] = {
1206                 .flags          = FL_BASE0,
1207                 .num_ports      = 1,
1208                 .base_baud      = 115200,
1209                 .uart_offset    = 8,
1210         },
1211         [pbn_b0_2_115200] = {
1212                 .flags          = FL_BASE0,
1213                 .num_ports      = 2,
1214                 .base_baud      = 115200,
1215                 .uart_offset    = 8,
1216         },
1217         [pbn_b0_4_115200] = {
1218                 .flags          = FL_BASE0,
1219                 .num_ports      = 4,
1220                 .base_baud      = 115200,
1221                 .uart_offset    = 8,
1222         },
1223         [pbn_b0_5_115200] = {
1224                 .flags          = FL_BASE0,
1225                 .num_ports      = 5,
1226                 .base_baud      = 115200,
1227                 .uart_offset    = 8,
1228         },
1229         [pbn_b0_8_115200] = {
1230                 .flags          = FL_BASE0,
1231                 .num_ports      = 8,
1232                 .base_baud      = 115200,
1233                 .uart_offset    = 8,
1234         },
1235         [pbn_b0_1_921600] = {
1236                 .flags          = FL_BASE0,
1237                 .num_ports      = 1,
1238                 .base_baud      = 921600,
1239                 .uart_offset    = 8,
1240         },
1241         [pbn_b0_2_921600] = {
1242                 .flags          = FL_BASE0,
1243                 .num_ports      = 2,
1244                 .base_baud      = 921600,
1245                 .uart_offset    = 8,
1246         },
1247         [pbn_b0_4_921600] = {
1248                 .flags          = FL_BASE0,
1249                 .num_ports      = 4,
1250                 .base_baud      = 921600,
1251                 .uart_offset    = 8,
1252         },
1253
1254         [pbn_b0_2_1130000] = {
1255                 .flags          = FL_BASE0,
1256                 .num_ports      = 2,
1257                 .base_baud      = 1130000,
1258                 .uart_offset    = 8,
1259         },
1260
1261         [pbn_b0_4_1152000] = {
1262                 .flags          = FL_BASE0,
1263                 .num_ports      = 4,
1264                 .base_baud      = 1152000,
1265                 .uart_offset    = 8,
1266         },
1267
1268         [pbn_b0_2_1843200] = {
1269                 .flags          = FL_BASE0,
1270                 .num_ports      = 2,
1271                 .base_baud      = 1843200,
1272                 .uart_offset    = 8,
1273         },
1274         [pbn_b0_4_1843200] = {
1275                 .flags          = FL_BASE0,
1276                 .num_ports      = 4,
1277                 .base_baud      = 1843200,
1278                 .uart_offset    = 8,
1279         },
1280
1281         [pbn_b0_2_1843200_200] = {
1282                 .flags          = FL_BASE0,
1283                 .num_ports      = 2,
1284                 .base_baud      = 1843200,
1285                 .uart_offset    = 0x200,
1286         },
1287         [pbn_b0_4_1843200_200] = {
1288                 .flags          = FL_BASE0,
1289                 .num_ports      = 4,
1290                 .base_baud      = 1843200,
1291                 .uart_offset    = 0x200,
1292         },
1293         [pbn_b0_8_1843200_200] = {
1294                 .flags          = FL_BASE0,
1295                 .num_ports      = 8,
1296                 .base_baud      = 1843200,
1297                 .uart_offset    = 0x200,
1298         },
1299         [pbn_b0_1_4000000] = {
1300                 .flags          = FL_BASE0,
1301                 .num_ports      = 1,
1302                 .base_baud      = 4000000,
1303                 .uart_offset    = 8,
1304         },
1305
1306         [pbn_b0_bt_1_115200] = {
1307                 .flags          = FL_BASE0|FL_BASE_BARS,
1308                 .num_ports      = 1,
1309                 .base_baud      = 115200,
1310                 .uart_offset    = 8,
1311         },
1312         [pbn_b0_bt_2_115200] = {
1313                 .flags          = FL_BASE0|FL_BASE_BARS,
1314                 .num_ports      = 2,
1315                 .base_baud      = 115200,
1316                 .uart_offset    = 8,
1317         },
1318         [pbn_b0_bt_8_115200] = {
1319                 .flags          = FL_BASE0|FL_BASE_BARS,
1320                 .num_ports      = 8,
1321                 .base_baud      = 115200,
1322                 .uart_offset    = 8,
1323         },
1324
1325         [pbn_b0_bt_1_460800] = {
1326                 .flags          = FL_BASE0|FL_BASE_BARS,
1327                 .num_ports      = 1,
1328                 .base_baud      = 460800,
1329                 .uart_offset    = 8,
1330         },
1331         [pbn_b0_bt_2_460800] = {
1332                 .flags          = FL_BASE0|FL_BASE_BARS,
1333                 .num_ports      = 2,
1334                 .base_baud      = 460800,
1335                 .uart_offset    = 8,
1336         },
1337         [pbn_b0_bt_4_460800] = {
1338                 .flags          = FL_BASE0|FL_BASE_BARS,
1339                 .num_ports      = 4,
1340                 .base_baud      = 460800,
1341                 .uart_offset    = 8,
1342         },
1343
1344         [pbn_b0_bt_1_921600] = {
1345                 .flags          = FL_BASE0|FL_BASE_BARS,
1346                 .num_ports      = 1,
1347                 .base_baud      = 921600,
1348                 .uart_offset    = 8,
1349         },
1350         [pbn_b0_bt_2_921600] = {
1351                 .flags          = FL_BASE0|FL_BASE_BARS,
1352                 .num_ports      = 2,
1353                 .base_baud      = 921600,
1354                 .uart_offset    = 8,
1355         },
1356         [pbn_b0_bt_4_921600] = {
1357                 .flags          = FL_BASE0|FL_BASE_BARS,
1358                 .num_ports      = 4,
1359                 .base_baud      = 921600,
1360                 .uart_offset    = 8,
1361         },
1362         [pbn_b0_bt_8_921600] = {
1363                 .flags          = FL_BASE0|FL_BASE_BARS,
1364                 .num_ports      = 8,
1365                 .base_baud      = 921600,
1366                 .uart_offset    = 8,
1367         },
1368
1369         [pbn_b1_1_115200] = {
1370                 .flags          = FL_BASE1,
1371                 .num_ports      = 1,
1372                 .base_baud      = 115200,
1373                 .uart_offset    = 8,
1374         },
1375         [pbn_b1_2_115200] = {
1376                 .flags          = FL_BASE1,
1377                 .num_ports      = 2,
1378                 .base_baud      = 115200,
1379                 .uart_offset    = 8,
1380         },
1381         [pbn_b1_4_115200] = {
1382                 .flags          = FL_BASE1,
1383                 .num_ports      = 4,
1384                 .base_baud      = 115200,
1385                 .uart_offset    = 8,
1386         },
1387         [pbn_b1_8_115200] = {
1388                 .flags          = FL_BASE1,
1389                 .num_ports      = 8,
1390                 .base_baud      = 115200,
1391                 .uart_offset    = 8,
1392         },
1393
1394         [pbn_b1_1_921600] = {
1395                 .flags          = FL_BASE1,
1396                 .num_ports      = 1,
1397                 .base_baud      = 921600,
1398                 .uart_offset    = 8,
1399         },
1400         [pbn_b1_2_921600] = {
1401                 .flags          = FL_BASE1,
1402                 .num_ports      = 2,
1403                 .base_baud      = 921600,
1404                 .uart_offset    = 8,
1405         },
1406         [pbn_b1_4_921600] = {
1407                 .flags          = FL_BASE1,
1408                 .num_ports      = 4,
1409                 .base_baud      = 921600,
1410                 .uart_offset    = 8,
1411         },
1412         [pbn_b1_8_921600] = {
1413                 .flags          = FL_BASE1,
1414                 .num_ports      = 8,
1415                 .base_baud      = 921600,
1416                 .uart_offset    = 8,
1417         },
1418         [pbn_b1_2_1250000] = {
1419                 .flags          = FL_BASE1,
1420                 .num_ports      = 2,
1421                 .base_baud      = 1250000,
1422                 .uart_offset    = 8,
1423         },
1424
1425         [pbn_b1_bt_1_115200] = {
1426                 .flags          = FL_BASE1|FL_BASE_BARS,
1427                 .num_ports      = 1,
1428                 .base_baud      = 115200,
1429                 .uart_offset    = 8,
1430         },
1431
1432         [pbn_b1_bt_2_921600] = {
1433                 .flags          = FL_BASE1|FL_BASE_BARS,
1434                 .num_ports      = 2,
1435                 .base_baud      = 921600,
1436                 .uart_offset    = 8,
1437         },
1438
1439         [pbn_b1_1_1382400] = {
1440                 .flags          = FL_BASE1,
1441                 .num_ports      = 1,
1442                 .base_baud      = 1382400,
1443                 .uart_offset    = 8,
1444         },
1445         [pbn_b1_2_1382400] = {
1446                 .flags          = FL_BASE1,
1447                 .num_ports      = 2,
1448                 .base_baud      = 1382400,
1449                 .uart_offset    = 8,
1450         },
1451         [pbn_b1_4_1382400] = {
1452                 .flags          = FL_BASE1,
1453                 .num_ports      = 4,
1454                 .base_baud      = 1382400,
1455                 .uart_offset    = 8,
1456         },
1457         [pbn_b1_8_1382400] = {
1458                 .flags          = FL_BASE1,
1459                 .num_ports      = 8,
1460                 .base_baud      = 1382400,
1461                 .uart_offset    = 8,
1462         },
1463
1464         [pbn_b2_1_115200] = {
1465                 .flags          = FL_BASE2,
1466                 .num_ports      = 1,
1467                 .base_baud      = 115200,
1468                 .uart_offset    = 8,
1469         },
1470         [pbn_b2_2_115200] = {
1471                 .flags          = FL_BASE2,
1472                 .num_ports      = 2,
1473                 .base_baud      = 115200,
1474                 .uart_offset    = 8,
1475         },
1476         [pbn_b2_4_115200] = {
1477                 .flags          = FL_BASE2,
1478                 .num_ports      = 4,
1479                 .base_baud      = 115200,
1480                 .uart_offset    = 8,
1481         },
1482         [pbn_b2_8_115200] = {
1483                 .flags          = FL_BASE2,
1484                 .num_ports      = 8,
1485                 .base_baud      = 115200,
1486                 .uart_offset    = 8,
1487         },
1488
1489         [pbn_b2_1_460800] = {
1490                 .flags          = FL_BASE2,
1491                 .num_ports      = 1,
1492                 .base_baud      = 460800,
1493                 .uart_offset    = 8,
1494         },
1495         [pbn_b2_4_460800] = {
1496                 .flags          = FL_BASE2,
1497                 .num_ports      = 4,
1498                 .base_baud      = 460800,
1499                 .uart_offset    = 8,
1500         },
1501         [pbn_b2_8_460800] = {
1502                 .flags          = FL_BASE2,
1503                 .num_ports      = 8,
1504                 .base_baud      = 460800,
1505                 .uart_offset    = 8,
1506         },
1507         [pbn_b2_16_460800] = {
1508                 .flags          = FL_BASE2,
1509                 .num_ports      = 16,
1510                 .base_baud      = 460800,
1511                 .uart_offset    = 8,
1512          },
1513
1514         [pbn_b2_1_921600] = {
1515                 .flags          = FL_BASE2,
1516                 .num_ports      = 1,
1517                 .base_baud      = 921600,
1518                 .uart_offset    = 8,
1519         },
1520         [pbn_b2_4_921600] = {
1521                 .flags          = FL_BASE2,
1522                 .num_ports      = 4,
1523                 .base_baud      = 921600,
1524                 .uart_offset    = 8,
1525         },
1526         [pbn_b2_8_921600] = {
1527                 .flags          = FL_BASE2,
1528                 .num_ports      = 8,
1529                 .base_baud      = 921600,
1530                 .uart_offset    = 8,
1531         },
1532
1533         [pbn_b2_bt_1_115200] = {
1534                 .flags          = FL_BASE2|FL_BASE_BARS,
1535                 .num_ports      = 1,
1536                 .base_baud      = 115200,
1537                 .uart_offset    = 8,
1538         },
1539         [pbn_b2_bt_2_115200] = {
1540                 .flags          = FL_BASE2|FL_BASE_BARS,
1541                 .num_ports      = 2,
1542                 .base_baud      = 115200,
1543                 .uart_offset    = 8,
1544         },
1545         [pbn_b2_bt_4_115200] = {
1546                 .flags          = FL_BASE2|FL_BASE_BARS,
1547                 .num_ports      = 4,
1548                 .base_baud      = 115200,
1549                 .uart_offset    = 8,
1550         },
1551
1552         [pbn_b2_bt_2_921600] = {
1553                 .flags          = FL_BASE2|FL_BASE_BARS,
1554                 .num_ports      = 2,
1555                 .base_baud      = 921600,
1556                 .uart_offset    = 8,
1557         },
1558         [pbn_b2_bt_4_921600] = {
1559                 .flags          = FL_BASE2|FL_BASE_BARS,
1560                 .num_ports      = 4,
1561                 .base_baud      = 921600,
1562                 .uart_offset    = 8,
1563         },
1564
1565         [pbn_b3_2_115200] = {
1566                 .flags          = FL_BASE3,
1567                 .num_ports      = 2,
1568                 .base_baud      = 115200,
1569                 .uart_offset    = 8,
1570         },
1571         [pbn_b3_4_115200] = {
1572                 .flags          = FL_BASE3,
1573                 .num_ports      = 4,
1574                 .base_baud      = 115200,
1575                 .uart_offset    = 8,
1576         },
1577         [pbn_b3_8_115200] = {
1578                 .flags          = FL_BASE3,
1579                 .num_ports      = 8,
1580                 .base_baud      = 115200,
1581                 .uart_offset    = 8,
1582         },
1583
1584         /*
1585          * Entries following this are board-specific.
1586          */
1587
1588         /*
1589          * Panacom - IOMEM
1590          */
1591         [pbn_panacom] = {
1592                 .flags          = FL_BASE2,
1593                 .num_ports      = 2,
1594                 .base_baud      = 921600,
1595                 .uart_offset    = 0x400,
1596                 .reg_shift      = 7,
1597         },
1598         [pbn_panacom2] = {
1599                 .flags          = FL_BASE2|FL_BASE_BARS,
1600                 .num_ports      = 2,
1601                 .base_baud      = 921600,
1602                 .uart_offset    = 0x400,
1603                 .reg_shift      = 7,
1604         },
1605         [pbn_panacom4] = {
1606                 .flags          = FL_BASE2|FL_BASE_BARS,
1607                 .num_ports      = 4,
1608                 .base_baud      = 921600,
1609                 .uart_offset    = 0x400,
1610                 .reg_shift      = 7,
1611         },
1612
1613         [pbn_exsys_4055] = {
1614                 .flags          = FL_BASE2,
1615                 .num_ports      = 4,
1616                 .base_baud      = 115200,
1617                 .uart_offset    = 8,
1618         },
1619
1620         /* I think this entry is broken - the first_offset looks wrong --rmk */
1621         [pbn_plx_romulus] = {
1622                 .flags          = FL_BASE2,
1623                 .num_ports      = 4,
1624                 .base_baud      = 921600,
1625                 .uart_offset    = 8 << 2,
1626                 .reg_shift      = 2,
1627                 .first_offset   = 0x03,
1628         },
1629
1630         /*
1631          * This board uses the size of PCI Base region 0 to
1632          * signal now many ports are available
1633          */
1634         [pbn_oxsemi] = {
1635                 .flags          = FL_BASE0|FL_REGION_SZ_CAP,
1636                 .num_ports      = 32,
1637                 .base_baud      = 115200,
1638                 .uart_offset    = 8,
1639         },
1640         [pbn_oxsemi_1_4000000] = {
1641                 .flags          = FL_BASE0,
1642                 .num_ports      = 1,
1643                 .base_baud      = 4000000,
1644                 .uart_offset    = 0x200,
1645                 .first_offset   = 0x1000,
1646         },
1647         [pbn_oxsemi_2_4000000] = {
1648                 .flags          = FL_BASE0,
1649                 .num_ports      = 2,
1650                 .base_baud      = 4000000,
1651                 .uart_offset    = 0x200,
1652                 .first_offset   = 0x1000,
1653         },
1654         [pbn_oxsemi_4_4000000] = {
1655                 .flags          = FL_BASE0,
1656                 .num_ports      = 4,
1657                 .base_baud      = 4000000,
1658                 .uart_offset    = 0x200,
1659                 .first_offset   = 0x1000,
1660         },
1661         [pbn_oxsemi_8_4000000] = {
1662                 .flags          = FL_BASE0,
1663                 .num_ports      = 8,
1664                 .base_baud      = 4000000,
1665                 .uart_offset    = 0x200,
1666                 .first_offset   = 0x1000,
1667         },
1668
1669
1670         /*
1671          * EKF addition for i960 Boards form EKF with serial port.
1672          * Max 256 ports.
1673          */
1674         [pbn_intel_i960] = {
1675                 .flags          = FL_BASE0,
1676                 .num_ports      = 32,
1677                 .base_baud      = 921600,
1678                 .uart_offset    = 8 << 2,
1679                 .reg_shift      = 2,
1680                 .first_offset   = 0x10000,
1681         },
1682         [pbn_sgi_ioc3] = {
1683                 .flags          = FL_BASE0|FL_NOIRQ,
1684                 .num_ports      = 1,
1685                 .base_baud      = 458333,
1686                 .uart_offset    = 8,
1687                 .reg_shift      = 0,
1688                 .first_offset   = 0x20178,
1689         },
1690
1691         /*
1692          * Computone - uses IOMEM.
1693          */
1694         [pbn_computone_4] = {
1695                 .flags          = FL_BASE0,
1696                 .num_ports      = 4,
1697                 .base_baud      = 921600,
1698                 .uart_offset    = 0x40,
1699                 .reg_shift      = 2,
1700                 .first_offset   = 0x200,
1701         },
1702         [pbn_computone_6] = {
1703                 .flags          = FL_BASE0,
1704                 .num_ports      = 6,
1705                 .base_baud      = 921600,
1706                 .uart_offset    = 0x40,
1707                 .reg_shift      = 2,
1708                 .first_offset   = 0x200,
1709         },
1710         [pbn_computone_8] = {
1711                 .flags          = FL_BASE0,
1712                 .num_ports      = 8,
1713                 .base_baud      = 921600,
1714                 .uart_offset    = 0x40,
1715                 .reg_shift      = 2,
1716                 .first_offset   = 0x200,
1717         },
1718         [pbn_sbsxrsio] = {
1719                 .flags          = FL_BASE0,
1720                 .num_ports      = 8,
1721                 .base_baud      = 460800,
1722                 .uart_offset    = 256,
1723                 .reg_shift      = 4,
1724         },
1725         /*
1726          * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
1727          *  Only basic 16550A support.
1728          *  XR17C15[24] are not tested, but they should work.
1729          */
1730         [pbn_exar_XR17C152] = {
1731                 .flags          = FL_BASE0,
1732                 .num_ports      = 2,
1733                 .base_baud      = 921600,
1734                 .uart_offset    = 0x200,
1735         },
1736         [pbn_exar_XR17C154] = {
1737                 .flags          = FL_BASE0,
1738                 .num_ports      = 4,
1739                 .base_baud      = 921600,
1740                 .uart_offset    = 0x200,
1741         },
1742         [pbn_exar_XR17C158] = {
1743                 .flags          = FL_BASE0,
1744                 .num_ports      = 8,
1745                 .base_baud      = 921600,
1746                 .uart_offset    = 0x200,
1747         },
1748         /*
1749          * PA Semi PWRficient PA6T-1682M on-chip UART
1750          */
1751         [pbn_pasemi_1682M] = {
1752                 .flags          = FL_BASE0,
1753                 .num_ports      = 1,
1754                 .base_baud      = 8333333,
1755         },
1756 };
1757
1758 static const struct pci_device_id softmodem_blacklist[] = {
1759         { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
1760 };
1761
1762 /*
1763  * Given a complete unknown PCI device, try to use some heuristics to
1764  * guess what the configuration might be, based on the pitiful PCI
1765  * serial specs.  Returns 0 on success, 1 on failure.
1766  */
1767 static int __devinit
1768 serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
1769 {
1770         const struct pci_device_id *blacklist;
1771         int num_iomem, num_port, first_port = -1, i;
1772
1773         /*
1774          * If it is not a communications device or the programming
1775          * interface is greater than 6, give up.
1776          *
1777          * (Should we try to make guesses for multiport serial devices
1778          * later?)
1779          */
1780         if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
1781              ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
1782             (dev->class & 0xff) > 6)
1783                 return -ENODEV;
1784
1785         /*
1786          * Do not access blacklisted devices that are known not to
1787          * feature serial ports.
1788          */
1789         for (blacklist = softmodem_blacklist;
1790              blacklist < softmodem_blacklist + ARRAY_SIZE(softmodem_blacklist);
1791              blacklist++) {
1792                 if (dev->vendor == blacklist->vendor &&
1793                     dev->device == blacklist->device)
1794                         return -ENODEV;
1795         }
1796
1797         num_iomem = num_port = 0;
1798         for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
1799                 if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
1800                         num_port++;
1801                         if (first_port == -1)
1802                                 first_port = i;
1803                 }
1804                 if (pci_resource_flags(dev, i) & IORESOURCE_MEM)
1805                         num_iomem++;
1806         }
1807
1808         /*
1809          * If there is 1 or 0 iomem regions, and exactly one port,
1810          * use it.  We guess the number of ports based on the IO
1811          * region size.
1812          */
1813         if (num_iomem <= 1 && num_port == 1) {
1814                 board->flags = first_port;
1815                 board->num_ports = pci_resource_len(dev, first_port) / 8;
1816                 return 0;
1817         }
1818
1819         /*
1820          * Now guess if we've got a board which indexes by BARs.
1821          * Each IO BAR should be 8 bytes, and they should follow
1822          * consecutively.
1823          */
1824         first_port = -1;
1825         num_port = 0;
1826         for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
1827                 if (pci_resource_flags(dev, i) & IORESOURCE_IO &&
1828                     pci_resource_len(dev, i) == 8 &&
1829                     (first_port == -1 || (first_port + num_port) == i)) {
1830                         num_port++;
1831                         if (first_port == -1)
1832                                 first_port = i;
1833                 }
1834         }
1835
1836         if (num_port > 1) {
1837                 board->flags = first_port | FL_BASE_BARS;
1838                 board->num_ports = num_port;
1839                 return 0;
1840         }
1841
1842         return -ENODEV;
1843 }
1844
1845 static inline int
1846 serial_pci_matches(struct pciserial_board *board,
1847                    struct pciserial_board *guessed)
1848 {
1849         return
1850             board->num_ports == guessed->num_ports &&
1851             board->base_baud == guessed->base_baud &&
1852             board->uart_offset == guessed->uart_offset &&
1853             board->reg_shift == guessed->reg_shift &&
1854             board->first_offset == guessed->first_offset;
1855 }
1856
1857 /*
1858  * Oxford Semiconductor Inc.
1859  * Check that device is part of the Tornado range of devices, then determine
1860  * the number of ports available on the device.
1861  */
1862 static int pci_oxsemi_tornado_init(struct pci_dev *dev, struct pciserial_board *board)
1863 {
1864         u8 __iomem *p;
1865         unsigned long deviceID;
1866         unsigned int  number_uarts;
1867
1868         p = pci_iomap(dev, 0, 5);
1869         if (p == NULL)
1870                 return -ENOMEM;
1871
1872         deviceID = ioread32(p);
1873         /* Tornado device */
1874         if (deviceID == 0x07000200) {
1875                 number_uarts = ioread8(p + 4);
1876                 board->num_ports = number_uarts;
1877                 printk(KERN_DEBUG
1878                         "%d ports detected on Oxford PCI Express device\n",
1879                                                                 number_uarts);
1880         }
1881         pci_iounmap(dev, p);
1882         return 0;
1883 }
1884
1885 struct serial_private *
1886 pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board)
1887 {
1888         struct uart_port serial_port;
1889         struct serial_private *priv;
1890         struct pci_serial_quirk *quirk;
1891         int rc, nr_ports, i;
1892
1893         /*
1894          * Find number of ports on board
1895          */
1896         if (dev->vendor == PCI_VENDOR_ID_OXSEMI)
1897                 pci_oxsemi_tornado_init(dev, board);
1898
1899         nr_ports = board->num_ports;
1900
1901         /*
1902          * Find an init and setup quirks.
1903          */
1904         quirk = find_quirk(dev);
1905
1906         /*
1907          * Run the new-style initialization function.
1908          * The initialization function returns:
1909          *  <0  - error
1910          *   0  - use board->num_ports
1911          *  >0  - number of ports
1912          */
1913         if (quirk->init) {
1914                 rc = quirk->init(dev);
1915                 if (rc < 0) {
1916                         priv = ERR_PTR(rc);
1917                         goto err_out;
1918                 }
1919                 if (rc)
1920                         nr_ports = rc;
1921         }
1922
1923         priv = kzalloc(sizeof(struct serial_private) +
1924                        sizeof(unsigned int) * nr_ports,
1925                        GFP_KERNEL);
1926         if (!priv) {
1927                 priv = ERR_PTR(-ENOMEM);
1928                 goto err_deinit;
1929         }
1930
1931         priv->dev = dev;
1932         priv->quirk = quirk;
1933
1934         memset(&serial_port, 0, sizeof(struct uart_port));
1935         serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
1936         serial_port.uartclk = board->base_baud * 16;
1937         serial_port.irq = get_pci_irq(dev, board);
1938         serial_port.dev = &dev->dev;
1939
1940         for (i = 0; i < nr_ports; i++) {
1941                 if (quirk->setup(priv, board, &serial_port, i))
1942                         break;
1943
1944 #ifdef SERIAL_DEBUG_PCI
1945                 printk(KERN_DEBUG "Setup PCI port: port %x, irq %d, type %d\n",
1946                        serial_port.iobase, serial_port.irq, serial_port.iotype);
1947 #endif
1948
1949                 priv->line[i] = serial8250_register_port(&serial_port);
1950                 if (priv->line[i] < 0) {
1951                         printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
1952                         break;
1953                 }
1954         }
1955         priv->nr = i;
1956         return priv;
1957
1958 err_deinit:
1959         if (quirk->exit)
1960                 quirk->exit(dev);
1961 err_out:
1962         return priv;
1963 }
1964 EXPORT_SYMBOL_GPL(pciserial_init_ports);
1965
1966 void pciserial_remove_ports(struct serial_private *priv)
1967 {
1968         struct pci_serial_quirk *quirk;
1969         int i;
1970
1971         for (i = 0; i < priv->nr; i++)
1972                 serial8250_unregister_port(priv->line[i]);
1973
1974         for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
1975                 if (priv->remapped_bar[i])
1976                         iounmap(priv->remapped_bar[i]);
1977                 priv->remapped_bar[i] = NULL;
1978         }
1979
1980         /*
1981          * Find the exit quirks.
1982          */
1983         quirk = find_quirk(priv->dev);
1984         if (quirk->exit)
1985                 quirk->exit(priv->dev);
1986
1987         kfree(priv);
1988 }
1989 EXPORT_SYMBOL_GPL(pciserial_remove_ports);
1990
1991 void pciserial_suspend_ports(struct serial_private *priv)
1992 {
1993         int i;
1994
1995         for (i = 0; i < priv->nr; i++)
1996                 if (priv->line[i] >= 0)
1997                         serial8250_suspend_port(priv->line[i]);
1998 }
1999 EXPORT_SYMBOL_GPL(pciserial_suspend_ports);
2000
2001 void pciserial_resume_ports(struct serial_private *priv)
2002 {
2003         int i;
2004
2005         /*
2006          * Ensure that the board is correctly configured.
2007          */
2008         if (priv->quirk->init)
2009                 priv->quirk->init(priv->dev);
2010
2011         for (i = 0; i < priv->nr; i++)
2012                 if (priv->line[i] >= 0)
2013                         serial8250_resume_port(priv->line[i]);
2014 }
2015 EXPORT_SYMBOL_GPL(pciserial_resume_ports);
2016
2017 /*
2018  * Probe one serial board.  Unfortunately, there is no rhyme nor reason
2019  * to the arrangement of serial ports on a PCI card.
2020  */
2021 static int __devinit
2022 pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
2023 {
2024         struct serial_private *priv;
2025         struct pciserial_board *board, tmp;
2026         int rc;
2027
2028         if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
2029                 printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
2030                         ent->driver_data);
2031                 return -EINVAL;
2032         }
2033
2034         board = &pci_boards[ent->driver_data];
2035
2036         rc = pci_enable_device(dev);
2037         if (rc)
2038                 return rc;
2039
2040         if (ent->driver_data == pbn_default) {
2041                 /*
2042                  * Use a copy of the pci_board entry for this;
2043                  * avoid changing entries in the table.
2044                  */
2045                 memcpy(&tmp, board, sizeof(struct pciserial_board));
2046                 board = &tmp;
2047
2048                 /*
2049                  * We matched one of our class entries.  Try to
2050                  * determine the parameters of this board.
2051                  */
2052                 rc = serial_pci_guess_board(dev, board);
2053                 if (rc)
2054                         goto disable;
2055         } else {
2056                 /*
2057                  * We matched an explicit entry.  If we are able to
2058                  * detect this boards settings with our heuristic,
2059                  * then we no longer need this entry.
2060                  */
2061                 memcpy(&tmp, &pci_boards[pbn_default],
2062                        sizeof(struct pciserial_board));
2063                 rc = serial_pci_guess_board(dev, &tmp);
2064                 if (rc == 0 && serial_pci_matches(board, &tmp))
2065                         moan_device("Redundant entry in serial pci_table.",
2066                                     dev);
2067         }
2068
2069         priv = pciserial_init_ports(dev, board);
2070         if (!IS_ERR(priv)) {
2071                 pci_set_drvdata(dev, priv);
2072                 return 0;
2073         }
2074
2075         rc = PTR_ERR(priv);
2076
2077  disable:
2078         pci_disable_device(dev);
2079         return rc;
2080 }
2081
2082 static void __devexit pciserial_remove_one(struct pci_dev *dev)
2083 {
2084         struct serial_private *priv = pci_get_drvdata(dev);
2085
2086         pci_set_drvdata(dev, NULL);
2087
2088         pciserial_remove_ports(priv);
2089
2090         pci_disable_device(dev);
2091 }
2092
2093 #ifdef CONFIG_PM
2094 static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
2095 {
2096         struct serial_private *priv = pci_get_drvdata(dev);
2097
2098         if (priv)
2099                 pciserial_suspend_ports(priv);
2100
2101         pci_save_state(dev);
2102         pci_set_power_state(dev, pci_choose_state(dev, state));
2103         return 0;
2104 }
2105
2106 static int pciserial_resume_one(struct pci_dev *dev)
2107 {
2108         int err;
2109         struct serial_private *priv = pci_get_drvdata(dev);
2110
2111         pci_set_power_state(dev, PCI_D0);
2112         pci_restore_state(dev);
2113
2114         if (priv) {
2115                 /*
2116                  * The device may have been disabled.  Re-enable it.
2117                  */
2118                 err = pci_enable_device(dev);
2119                 /* FIXME: We cannot simply error out here */
2120                 if (err)
2121                         printk(KERN_ERR "pciserial: Unable to re-enable ports, trying to continue.\n");
2122                 pciserial_resume_ports(priv);
2123         }
2124         return 0;
2125 }
2126 #endif
2127
2128 static struct pci_device_id serial_pci_tbl[] = {
2129         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
2130                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2131                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
2132                 pbn_b1_8_1382400 },
2133         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
2134                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2135                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
2136                 pbn_b1_4_1382400 },
2137         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
2138                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2139                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
2140                 pbn_b1_2_1382400 },
2141         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2142                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2143                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
2144                 pbn_b1_8_1382400 },
2145         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2146                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2147                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
2148                 pbn_b1_4_1382400 },
2149         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2150                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2151                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
2152                 pbn_b1_2_1382400 },
2153         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2154                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2155                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0,
2156                 pbn_b1_8_921600 },
2157         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2158                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2159                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0,
2160                 pbn_b1_8_921600 },
2161         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2162                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2163                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0,
2164                 pbn_b1_4_921600 },
2165         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2166                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2167                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0,
2168                 pbn_b1_4_921600 },
2169         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2170                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2171                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0,
2172                 pbn_b1_2_921600 },
2173         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2174                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2175                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0,
2176                 pbn_b1_8_921600 },
2177         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2178                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2179                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0,
2180                 pbn_b1_8_921600 },
2181         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2182                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2183                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0,
2184                 pbn_b1_4_921600 },
2185         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
2186                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2187                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0,
2188                 pbn_b1_2_1250000 },
2189         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
2190                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2191                 PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0,
2192                 pbn_b0_2_1843200 },
2193         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
2194                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2195                 PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0,
2196                 pbn_b0_4_1843200 },
2197         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
2198                 PCI_VENDOR_ID_AFAVLAB,
2199                 PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0,
2200                 pbn_b0_4_1152000 },
2201         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
2202                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2203                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232, 0, 0,
2204                 pbn_b0_2_1843200_200 },
2205         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
2206                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2207                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232, 0, 0,
2208                 pbn_b0_4_1843200_200 },
2209         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
2210                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2211                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232, 0, 0,
2212                 pbn_b0_8_1843200_200 },
2213         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
2214                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2215                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1, 0, 0,
2216                 pbn_b0_2_1843200_200 },
2217         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
2218                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2219                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2, 0, 0,
2220                 pbn_b0_4_1843200_200 },
2221         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
2222                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2223                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4, 0, 0,
2224                 pbn_b0_8_1843200_200 },
2225         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
2226                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2227                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2, 0, 0,
2228                 pbn_b0_2_1843200_200 },
2229         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
2230                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2231                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4, 0, 0,
2232                 pbn_b0_4_1843200_200 },
2233         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
2234                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2235                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8, 0, 0,
2236                 pbn_b0_8_1843200_200 },
2237         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
2238                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2239                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485, 0, 0,
2240                 pbn_b0_2_1843200_200 },
2241         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
2242                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2243                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485, 0, 0,
2244                 pbn_b0_4_1843200_200 },
2245         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
2246                 PCI_SUBVENDOR_ID_CONNECT_TECH,
2247                 PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0,
2248                 pbn_b0_8_1843200_200 },
2249
2250         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
2251                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2252                 pbn_b2_bt_1_115200 },
2253         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
2254                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2255                 pbn_b2_bt_2_115200 },
2256         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
2257                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2258                 pbn_b2_bt_4_115200 },
2259         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
2260                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2261                 pbn_b2_bt_2_115200 },
2262         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
2263                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2264                 pbn_b2_bt_4_115200 },
2265         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
2266                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2267                 pbn_b2_8_115200 },
2268         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8,
2269                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2270                 pbn_b2_8_115200 },
2271
2272         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2,
2273                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2274                 pbn_b2_bt_2_115200 },
2275         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200,
2276                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2277                 pbn_b2_bt_2_921600 },
2278         /*
2279          * VScom SPCOM800, from sl@s.pl
2280          */
2281         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
2282                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2283                 pbn_b2_8_921600 },
2284         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
2285                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2286                 pbn_b2_4_921600 },
2287         /* Unknown card - subdevice 0x1584 */
2288         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2289                 PCI_VENDOR_ID_PLX,
2290                 PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
2291                 pbn_b0_4_115200 },
2292         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2293                 PCI_SUBVENDOR_ID_KEYSPAN,
2294                 PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
2295                 pbn_panacom },
2296         {       PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM,
2297                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2298                 pbn_panacom4 },
2299         {       PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
2300                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2301                 pbn_panacom2 },
2302         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
2303                 PCI_VENDOR_ID_ESDGMBH,
2304                 PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0,
2305                 pbn_b2_4_115200 },
2306         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2307                 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
2308                 PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
2309                 pbn_b2_4_460800 },
2310         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2311                 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
2312                 PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
2313                 pbn_b2_8_460800 },
2314         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2315                 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
2316                 PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
2317                 pbn_b2_16_460800 },
2318         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2319                 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
2320                 PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
2321                 pbn_b2_16_460800 },
2322         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2323                 PCI_SUBVENDOR_ID_CHASE_PCIRAS,
2324                 PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
2325                 pbn_b2_4_460800 },
2326         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2327                 PCI_SUBVENDOR_ID_CHASE_PCIRAS,
2328                 PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
2329                 pbn_b2_8_460800 },
2330         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
2331                 PCI_SUBVENDOR_ID_EXSYS,
2332                 PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0,
2333                 pbn_exsys_4055 },
2334         /*
2335          * Megawolf Romulus PCI Serial Card, from Mike Hudson
2336          * (Exoray@isys.ca)
2337          */
2338         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
2339                 0x10b5, 0x106a, 0, 0,
2340                 pbn_plx_romulus },
2341         {       PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
2342                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2343                 pbn_b1_4_115200 },
2344         {       PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
2345                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2346                 pbn_b1_2_115200 },
2347         {       PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
2348                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2349                 pbn_b1_8_115200 },
2350         {       PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
2351                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2352                 pbn_b1_8_115200 },
2353         {       PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
2354                 PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4,
2355                 0, 0,
2356                 pbn_b0_4_921600 },
2357         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
2358                 PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL,
2359                 0, 0,
2360                 pbn_b0_4_1152000 },
2361
2362                 /*
2363                  * The below card is a little controversial since it is the
2364                  * subject of a PCI vendor/device ID clash.  (See
2365                  * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).
2366                  * For now just used the hex ID 0x950a.
2367                  */
2368         {       PCI_VENDOR_ID_OXSEMI, 0x950a,
2369                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2370                 pbn_b0_2_1130000 },
2371         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
2372                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2373                 pbn_b0_4_115200 },
2374         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
2375                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2376                 pbn_b0_bt_2_921600 },
2377
2378         /*
2379          * Oxford Semiconductor Inc. Tornado PCI express device range.
2380          */
2381         {       PCI_VENDOR_ID_OXSEMI, 0xc101,    /* OXPCIe952 1 Legacy UART */
2382                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2383                 pbn_b0_1_4000000 },
2384         {       PCI_VENDOR_ID_OXSEMI, 0xc105,    /* OXPCIe952 1 Legacy UART */
2385                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2386                 pbn_b0_1_4000000 },
2387         {       PCI_VENDOR_ID_OXSEMI, 0xc11b,    /* OXPCIe952 1 Native UART */
2388                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2389                 pbn_oxsemi_1_4000000 },
2390         {       PCI_VENDOR_ID_OXSEMI, 0xc11f,    /* OXPCIe952 1 Native UART */
2391                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2392                 pbn_oxsemi_1_4000000 },
2393         {       PCI_VENDOR_ID_OXSEMI, 0xc120,    /* OXPCIe952 1 Legacy UART */
2394                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2395                 pbn_b0_1_4000000 },
2396         {       PCI_VENDOR_ID_OXSEMI, 0xc124,    /* OXPCIe952 1 Legacy UART */
2397                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2398                 pbn_b0_1_4000000 },
2399         {       PCI_VENDOR_ID_OXSEMI, 0xc138,    /* OXPCIe952 1 Native UART */
2400                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2401                 pbn_oxsemi_1_4000000 },
2402         {       PCI_VENDOR_ID_OXSEMI, 0xc13d,    /* OXPCIe952 1 Native UART */
2403                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2404                 pbn_oxsemi_1_4000000 },
2405         {       PCI_VENDOR_ID_OXSEMI, 0xc140,    /* OXPCIe952 1 Legacy UART */
2406                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2407                 pbn_b0_1_4000000 },
2408         {       PCI_VENDOR_ID_OXSEMI, 0xc141,    /* OXPCIe952 1 Legacy UART */
2409                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2410                 pbn_b0_1_4000000 },
2411         {       PCI_VENDOR_ID_OXSEMI, 0xc144,    /* OXPCIe952 1 Legacy UART */
2412                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2413                 pbn_b0_1_4000000 },
2414         {       PCI_VENDOR_ID_OXSEMI, 0xc145,    /* OXPCIe952 1 Legacy UART */
2415                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2416                 pbn_b0_1_4000000 },
2417         {       PCI_VENDOR_ID_OXSEMI, 0xc158,    /* OXPCIe952 2 Native UART */
2418                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2419                 pbn_oxsemi_2_4000000 },
2420         {       PCI_VENDOR_ID_OXSEMI, 0xc15d,    /* OXPCIe952 2 Native UART */
2421                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2422                 pbn_oxsemi_2_4000000 },
2423         {       PCI_VENDOR_ID_OXSEMI, 0xc208,    /* OXPCIe954 4 Native UART */
2424                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2425                 pbn_oxsemi_4_4000000 },
2426         {       PCI_VENDOR_ID_OXSEMI, 0xc20d,    /* OXPCIe954 4 Native UART */
2427                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2428                 pbn_oxsemi_4_4000000 },
2429         {       PCI_VENDOR_ID_OXSEMI, 0xc308,    /* OXPCIe958 8 Native UART */
2430                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2431                 pbn_oxsemi_8_4000000 },
2432         {       PCI_VENDOR_ID_OXSEMI, 0xc30d,    /* OXPCIe958 8 Native UART */
2433                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2434                 pbn_oxsemi_8_4000000 },
2435         {       PCI_VENDOR_ID_OXSEMI, 0xc40b,    /* OXPCIe200 1 Native UART */
2436                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2437                 pbn_oxsemi_1_4000000 },
2438         {       PCI_VENDOR_ID_OXSEMI, 0xc40f,    /* OXPCIe200 1 Native UART */
2439                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2440                 pbn_oxsemi_1_4000000 },
2441         {       PCI_VENDOR_ID_OXSEMI, 0xc41b,    /* OXPCIe200 1 Native UART */
2442                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2443                 pbn_oxsemi_1_4000000 },
2444         {       PCI_VENDOR_ID_OXSEMI, 0xc41f,    /* OXPCIe200 1 Native UART */
2445                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2446                 pbn_oxsemi_1_4000000 },
2447         {       PCI_VENDOR_ID_OXSEMI, 0xc42b,    /* OXPCIe200 1 Native UART */
2448                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2449                 pbn_oxsemi_1_4000000 },
2450         {       PCI_VENDOR_ID_OXSEMI, 0xc42f,    /* OXPCIe200 1 Native UART */
2451                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2452                 pbn_oxsemi_1_4000000 },
2453         {       PCI_VENDOR_ID_OXSEMI, 0xc43b,    /* OXPCIe200 1 Native UART */
2454                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2455                 pbn_oxsemi_1_4000000 },
2456         {       PCI_VENDOR_ID_OXSEMI, 0xc43f,    /* OXPCIe200 1 Native UART */
2457                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2458                 pbn_oxsemi_1_4000000 },
2459         {       PCI_VENDOR_ID_OXSEMI, 0xc44b,    /* OXPCIe200 1 Native UART */
2460                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2461                 pbn_oxsemi_1_4000000 },
2462         {       PCI_VENDOR_ID_OXSEMI, 0xc44f,    /* OXPCIe200 1 Native UART */
2463                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2464                 pbn_oxsemi_1_4000000 },
2465         {       PCI_VENDOR_ID_OXSEMI, 0xc45b,    /* OXPCIe200 1 Native UART */
2466                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2467                 pbn_oxsemi_1_4000000 },
2468         {       PCI_VENDOR_ID_OXSEMI, 0xc45f,    /* OXPCIe200 1 Native UART */
2469                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2470                 pbn_oxsemi_1_4000000 },
2471         {       PCI_VENDOR_ID_OXSEMI, 0xc46b,    /* OXPCIe200 1 Native UART */
2472                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2473                 pbn_oxsemi_1_4000000 },
2474         {       PCI_VENDOR_ID_OXSEMI, 0xc46f,    /* OXPCIe200 1 Native UART */
2475                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2476                 pbn_oxsemi_1_4000000 },
2477         {       PCI_VENDOR_ID_OXSEMI, 0xc47b,    /* OXPCIe200 1 Native UART */
2478                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2479                 pbn_oxsemi_1_4000000 },
2480         {       PCI_VENDOR_ID_OXSEMI, 0xc47f,    /* OXPCIe200 1 Native UART */
2481                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2482                 pbn_oxsemi_1_4000000 },
2483         {       PCI_VENDOR_ID_OXSEMI, 0xc48b,    /* OXPCIe200 1 Native UART */
2484                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2485                 pbn_oxsemi_1_4000000 },
2486         {       PCI_VENDOR_ID_OXSEMI, 0xc48f,    /* OXPCIe200 1 Native UART */
2487                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2488                 pbn_oxsemi_1_4000000 },
2489         {       PCI_VENDOR_ID_OXSEMI, 0xc49b,    /* OXPCIe200 1 Native UART */
2490                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2491                 pbn_oxsemi_1_4000000 },
2492         {       PCI_VENDOR_ID_OXSEMI, 0xc49f,    /* OXPCIe200 1 Native UART */
2493                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2494                 pbn_oxsemi_1_4000000 },
2495         {       PCI_VENDOR_ID_OXSEMI, 0xc4ab,    /* OXPCIe200 1 Native UART */
2496                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2497                 pbn_oxsemi_1_4000000 },
2498         {       PCI_VENDOR_ID_OXSEMI, 0xc4af,    /* OXPCIe200 1 Native UART */
2499                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2500                 pbn_oxsemi_1_4000000 },
2501         {       PCI_VENDOR_ID_OXSEMI, 0xc4bb,    /* OXPCIe200 1 Native UART */
2502                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2503                 pbn_oxsemi_1_4000000 },
2504         {       PCI_VENDOR_ID_OXSEMI, 0xc4bf,    /* OXPCIe200 1 Native UART */
2505                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2506                 pbn_oxsemi_1_4000000 },
2507         {       PCI_VENDOR_ID_OXSEMI, 0xc4cb,    /* OXPCIe200 1 Native UART */
2508                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2509                 pbn_oxsemi_1_4000000 },
2510         {       PCI_VENDOR_ID_OXSEMI, 0xc4cf,    /* OXPCIe200 1 Native UART */
2511                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2512                 pbn_oxsemi_1_4000000 },
2513
2514         /*
2515          * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
2516          * from skokodyn@yahoo.com
2517          */
2518         {       PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
2519                 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0,
2520                 pbn_sbsxrsio },
2521         {       PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
2522                 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0,
2523                 pbn_sbsxrsio },
2524         {       PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
2525                 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0,
2526                 pbn_sbsxrsio },
2527         {       PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
2528                 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0,
2529                 pbn_sbsxrsio },
2530
2531         /*
2532          * Digitan DS560-558, from jimd@esoft.com
2533          */
2534         {       PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
2535                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2536                 pbn_b1_1_115200 },
2537
2538         /*
2539          * Titan Electronic cards
2540          *  The 400L and 800L have a custom setup quirk.
2541          */
2542         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
2543                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2544                 pbn_b0_1_921600 },
2545         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
2546                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2547                 pbn_b0_2_921600 },
2548         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
2549                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2550                 pbn_b0_4_921600 },
2551         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
2552                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2553                 pbn_b0_4_921600 },
2554         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L,
2555                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2556                 pbn_b1_1_921600 },
2557         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L,
2558                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2559                 pbn_b1_bt_2_921600 },
2560         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L,
2561                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2562                 pbn_b0_bt_4_921600 },
2563         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
2564                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2565                 pbn_b0_bt_8_921600 },
2566
2567         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
2568                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2569                 pbn_b2_1_460800 },
2570         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650,
2571                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2572                 pbn_b2_1_460800 },
2573         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850,
2574                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2575                 pbn_b2_1_460800 },
2576         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550,
2577                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2578                 pbn_b2_bt_2_921600 },
2579         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650,
2580                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2581                 pbn_b2_bt_2_921600 },
2582         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850,
2583                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2584                 pbn_b2_bt_2_921600 },
2585         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550,
2586                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2587                 pbn_b2_bt_4_921600 },
2588         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650,
2589                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2590                 pbn_b2_bt_4_921600 },
2591         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850,
2592                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2593                 pbn_b2_bt_4_921600 },
2594         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550,
2595                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2596                 pbn_b0_1_921600 },
2597         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650,
2598                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2599                 pbn_b0_1_921600 },
2600         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850,
2601                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2602                 pbn_b0_1_921600 },
2603         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550,
2604                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2605                 pbn_b0_bt_2_921600 },
2606         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650,
2607                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2608                 pbn_b0_bt_2_921600 },
2609         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850,
2610                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2611                 pbn_b0_bt_2_921600 },
2612         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550,
2613                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2614                 pbn_b0_bt_4_921600 },
2615         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650,
2616                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2617                 pbn_b0_bt_4_921600 },
2618         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
2619                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2620                 pbn_b0_bt_4_921600 },
2621         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550,
2622                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2623                 pbn_b0_bt_8_921600 },
2624         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650,
2625                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2626                 pbn_b0_bt_8_921600 },
2627         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850,
2628                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2629                 pbn_b0_bt_8_921600 },
2630
2631         /*
2632          * Computone devices submitted by Doug McNash dmcnash@computone.com
2633          */
2634         {       PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
2635                 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4,
2636                 0, 0, pbn_computone_4 },
2637         {       PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
2638                 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8,
2639                 0, 0, pbn_computone_8 },
2640         {       PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
2641                 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6,
2642                 0, 0, pbn_computone_6 },
2643
2644         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N,
2645                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2646                 pbn_oxsemi },
2647         {       PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
2648                 PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0,
2649                 pbn_b0_bt_1_921600 },
2650
2651         /*
2652          * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org>
2653          */
2654         {       PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028,
2655                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2656                 pbn_b0_bt_8_115200 },
2657         {       PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030,
2658                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2659                 pbn_b0_bt_8_115200 },
2660
2661         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL,
2662                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2663                 pbn_b0_bt_2_115200 },
2664         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A,
2665                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2666                 pbn_b0_bt_2_115200 },
2667         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
2668                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2669                 pbn_b0_bt_2_115200 },
2670         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A,
2671                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2672                 pbn_b0_bt_4_460800 },
2673         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B,
2674                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2675                 pbn_b0_bt_4_460800 },
2676         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS,
2677                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2678                 pbn_b0_bt_2_460800 },
2679         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A,
2680                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2681                 pbn_b0_bt_2_460800 },
2682         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B,
2683                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2684                 pbn_b0_bt_2_460800 },
2685         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL,
2686                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2687                 pbn_b0_bt_1_115200 },
2688         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650,
2689                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2690                 pbn_b0_bt_1_460800 },
2691
2692         /*
2693          * Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408).
2694          * Cards are identified by their subsystem vendor IDs, which
2695          * (in hex) match the model number.
2696          *
2697          * Note that JC140x are RS422/485 cards which require ox950
2698          * ACR = 0x10, and as such are not currently fully supported.
2699          */
2700         {       PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
2701                 0x1204, 0x0004, 0, 0,
2702                 pbn_b0_4_921600 },
2703         {       PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
2704                 0x1208, 0x0004, 0, 0,
2705                 pbn_b0_4_921600 },
2706 /*      {       PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
2707                 0x1402, 0x0002, 0, 0,
2708                 pbn_b0_2_921600 }, */
2709 /*      {       PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0,
2710                 0x1404, 0x0004, 0, 0,
2711                 pbn_b0_4_921600 }, */
2712         {       PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1,
2713                 0x1208, 0x0004, 0, 0,
2714                 pbn_b0_4_921600 },
2715
2716         /*
2717          * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com
2718          */
2719         {       PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4,
2720                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2721                 pbn_b1_1_1382400 },
2722
2723         /*
2724          * Dell Remote Access Card III - Tim_T_Murphy@Dell.com
2725          */
2726         {       PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII,
2727                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2728                 pbn_b1_1_1382400 },
2729
2730         /*
2731          * RAStel 2 port modem, gerg@moreton.com.au
2732          */
2733         {       PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT,
2734                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2735                 pbn_b2_bt_2_115200 },
2736
2737         /*
2738          * EKF addition for i960 Boards form EKF with serial port
2739          */
2740         {       PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP,
2741                 0xE4BF, PCI_ANY_ID, 0, 0,
2742                 pbn_intel_i960 },
2743
2744         /*
2745          * Xircom Cardbus/Ethernet combos
2746          */
2747         {       PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM,
2748                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2749                 pbn_b0_1_115200 },
2750         /*
2751          * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry)
2752          */
2753         {       PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G,
2754                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2755                 pbn_b0_1_115200 },
2756
2757         /*
2758          * Untested PCI modems, sent in from various folks...
2759          */
2760
2761         /*
2762          * Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de>
2763          */
2764         {       PCI_VENDOR_ID_ROCKWELL, 0x1004,
2765                 0x1048, 0x1500, 0, 0,
2766                 pbn_b1_1_115200 },
2767
2768         {       PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
2769                 0xFF00, 0, 0, 0,
2770                 pbn_sgi_ioc3 },
2771
2772         /*
2773          * HP Diva card
2774          */
2775         {       PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
2776                 PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0,
2777                 pbn_b1_1_115200 },
2778         {       PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
2779                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2780                 pbn_b0_5_115200 },
2781         {       PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
2782                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2783                 pbn_b2_1_115200 },
2784
2785         {       PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2,
2786                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2787                 pbn_b3_2_115200 },
2788         {       PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4,
2789                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2790                 pbn_b3_4_115200 },
2791         {       PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8,
2792                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2793                 pbn_b3_8_115200 },
2794
2795         /*
2796          * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
2797          */
2798         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
2799                 PCI_ANY_ID, PCI_ANY_ID,
2800                 0,
2801                 0, pbn_exar_XR17C152 },
2802         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
2803                 PCI_ANY_ID, PCI_ANY_ID,
2804                 0,
2805                 0, pbn_exar_XR17C154 },
2806         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
2807                 PCI_ANY_ID, PCI_ANY_ID,
2808                 0,
2809                 0, pbn_exar_XR17C158 },
2810
2811         /*
2812          * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
2813          */
2814         {       PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
2815                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2816                 pbn_b0_1_115200 },
2817         /*
2818          * ITE
2819          */
2820         {       PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872,
2821                 PCI_ANY_ID, PCI_ANY_ID,
2822                 0, 0,
2823                 pbn_b1_bt_1_115200 },
2824
2825         /*
2826          * IntaShield IS-200
2827          */
2828         {       PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,
2829                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,   /* 135a.0811 */
2830                 pbn_b2_2_115200 },
2831         /*
2832          * IntaShield IS-400
2833          */
2834         {       PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400,
2835                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,    /* 135a.0dc0 */
2836                 pbn_b2_4_115200 },
2837         /*
2838          * Perle PCI-RAS cards
2839          */
2840         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
2841                 PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4,
2842                 0, 0, pbn_b2_4_921600 },
2843         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
2844                 PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8,
2845                 0, 0, pbn_b2_8_921600 },
2846
2847         /*
2848          * Mainpine series cards: Fairly standard layout but fools
2849          * parts of the autodetect in some cases and uses otherwise
2850          * unmatched communications subclasses in the PCI Express case
2851          */
2852
2853         {       /* RockForceDUO */
2854                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2855                 PCI_VENDOR_ID_MAINPINE, 0x0200,
2856                 0, 0, pbn_b0_2_115200 },
2857         {       /* RockForceQUATRO */
2858                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2859                 PCI_VENDOR_ID_MAINPINE, 0x0300,
2860                 0, 0, pbn_b0_4_115200 },
2861         {       /* RockForceDUO+ */
2862                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2863                 PCI_VENDOR_ID_MAINPINE, 0x0400,
2864                 0, 0, pbn_b0_2_115200 },
2865         {       /* RockForceQUATRO+ */
2866                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2867                 PCI_VENDOR_ID_MAINPINE, 0x0500,
2868                 0, 0, pbn_b0_4_115200 },
2869         {       /* RockForce+ */
2870                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2871                 PCI_VENDOR_ID_MAINPINE, 0x0600,
2872                 0, 0, pbn_b0_2_115200 },
2873         {       /* RockForce+ */
2874                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2875                 PCI_VENDOR_ID_MAINPINE, 0x0700,
2876                 0, 0, pbn_b0_4_115200 },
2877         {       /* RockForceOCTO+ */
2878                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2879                 PCI_VENDOR_ID_MAINPINE, 0x0800,
2880                 0, 0, pbn_b0_8_115200 },
2881         {       /* RockForceDUO+ */
2882                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2883                 PCI_VENDOR_ID_MAINPINE, 0x0C00,
2884                 0, 0, pbn_b0_2_115200 },
2885         {       /* RockForceQUARTRO+ */
2886                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2887                 PCI_VENDOR_ID_MAINPINE, 0x0D00,
2888                 0, 0, pbn_b0_4_115200 },
2889         {       /* RockForceOCTO+ */
2890                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2891                 PCI_VENDOR_ID_MAINPINE, 0x1D00,
2892                 0, 0, pbn_b0_8_115200 },
2893         {       /* RockForceD1 */
2894                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2895                 PCI_VENDOR_ID_MAINPINE, 0x2000,
2896                 0, 0, pbn_b0_1_115200 },
2897         {       /* RockForceF1 */
2898                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2899                 PCI_VENDOR_ID_MAINPINE, 0x2100,
2900                 0, 0, pbn_b0_1_115200 },
2901         {       /* RockForceD2 */
2902                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2903                 PCI_VENDOR_ID_MAINPINE, 0x2200,
2904                 0, 0, pbn_b0_2_115200 },
2905         {       /* RockForceF2 */
2906                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2907                 PCI_VENDOR_ID_MAINPINE, 0x2300,
2908                 0, 0, pbn_b0_2_115200 },
2909         {       /* RockForceD4 */
2910                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2911                 PCI_VENDOR_ID_MAINPINE, 0x2400,
2912                 0, 0, pbn_b0_4_115200 },
2913         {       /* RockForceF4 */
2914                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2915                 PCI_VENDOR_ID_MAINPINE, 0x2500,
2916                 0, 0, pbn_b0_4_115200 },
2917         {       /* RockForceD8 */
2918                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2919                 PCI_VENDOR_ID_MAINPINE, 0x2600,
2920                 0, 0, pbn_b0_8_115200 },
2921         {       /* RockForceF8 */
2922                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2923                 PCI_VENDOR_ID_MAINPINE, 0x2700,
2924                 0, 0, pbn_b0_8_115200 },
2925         {       /* IQ Express D1 */
2926                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2927                 PCI_VENDOR_ID_MAINPINE, 0x3000,
2928                 0, 0, pbn_b0_1_115200 },
2929         {       /* IQ Express F1 */
2930                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2931                 PCI_VENDOR_ID_MAINPINE, 0x3100,
2932                 0, 0, pbn_b0_1_115200 },
2933         {       /* IQ Express D2 */
2934                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2935                 PCI_VENDOR_ID_MAINPINE, 0x3200,
2936                 0, 0, pbn_b0_2_115200 },
2937         {       /* IQ Express F2 */
2938                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2939                 PCI_VENDOR_ID_MAINPINE, 0x3300,
2940                 0, 0, pbn_b0_2_115200 },
2941         {       /* IQ Express D4 */
2942                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2943                 PCI_VENDOR_ID_MAINPINE, 0x3400,
2944                 0, 0, pbn_b0_4_115200 },
2945         {       /* IQ Express F4 */
2946                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2947                 PCI_VENDOR_ID_MAINPINE, 0x3500,
2948                 0, 0, pbn_b0_4_115200 },
2949         {       /* IQ Express D8 */
2950                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2951                 PCI_VENDOR_ID_MAINPINE, 0x3C00,
2952                 0, 0, pbn_b0_8_115200 },
2953         {       /* IQ Express F8 */
2954                 PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE,
2955                 PCI_VENDOR_ID_MAINPINE, 0x3D00,
2956                 0, 0, pbn_b0_8_115200 },
2957
2958
2959         /*
2960          * PA Semi PA6T-1682M on-chip UART
2961          */
2962         {       PCI_VENDOR_ID_PASEMI, 0xa004,
2963                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2964                 pbn_pasemi_1682M },
2965
2966         /*
2967         * ADDI-DATA GmbH communication cards <info@addi-data.com>
2968         */
2969         {       PCI_VENDOR_ID_ADDIDATA,
2970                 PCI_DEVICE_ID_ADDIDATA_APCI7500,
2971                 PCI_ANY_ID,
2972                 PCI_ANY_ID,
2973                 0,
2974                 0,
2975                 pbn_b0_4_115200 },
2976
2977         {       PCI_VENDOR_ID_ADDIDATA,
2978                 PCI_DEVICE_ID_ADDIDATA_APCI7420,
2979                 PCI_ANY_ID,
2980                 PCI_ANY_ID,
2981                 0,
2982                 0,
2983                 pbn_b0_2_115200 },
2984
2985         {       PCI_VENDOR_ID_ADDIDATA,
2986                 PCI_DEVICE_ID_ADDIDATA_APCI7300,
2987                 PCI_ANY_ID,
2988                 PCI_ANY_ID,
2989                 0,
2990                 0,
2991                 pbn_b0_1_115200 },
2992
2993         {       PCI_VENDOR_ID_ADDIDATA_OLD,
2994                 PCI_DEVICE_ID_ADDIDATA_APCI7800,
2995                 PCI_ANY_ID,
2996                 PCI_ANY_ID,
2997                 0,
2998                 0,
2999                 pbn_b1_8_115200 },
3000
3001         {       PCI_VENDOR_ID_ADDIDATA,
3002                 PCI_DEVICE_ID_ADDIDATA_APCI7500_2,
3003                 PCI_ANY_ID,
3004                 PCI_ANY_ID,
3005                 0,
3006                 0,
3007                 pbn_b0_4_115200 },
3008
3009         {       PCI_VENDOR_ID_ADDIDATA,
3010                 PCI_DEVICE_ID_ADDIDATA_APCI7420_2,
3011                 PCI_ANY_ID,
3012                 PCI_ANY_ID,
3013                 0,
3014                 0,
3015                 pbn_b0_2_115200 },
3016
3017         {       PCI_VENDOR_ID_ADDIDATA,
3018                 PCI_DEVICE_ID_ADDIDATA_APCI7300_2,
3019                 PCI_ANY_ID,
3020                 PCI_ANY_ID,
3021                 0,
3022                 0,
3023                 pbn_b0_1_115200 },
3024
3025         {       PCI_VENDOR_ID_ADDIDATA,
3026                 PCI_DEVICE_ID_ADDIDATA_APCI7500_3,
3027                 PCI_ANY_ID,
3028                 PCI_ANY_ID,
3029                 0,
3030                 0,
3031                 pbn_b0_4_115200 },
3032
3033         {       PCI_VENDOR_ID_ADDIDATA,
3034                 PCI_DEVICE_ID_ADDIDATA_APCI7420_3,
3035                 PCI_ANY_ID,
3036                 PCI_ANY_ID,
3037                 0,
3038                 0,
3039                 pbn_b0_2_115200 },
3040
3041         {       PCI_VENDOR_ID_ADDIDATA,
3042                 PCI_DEVICE_ID_ADDIDATA_APCI7300_3,
3043                 PCI_ANY_ID,
3044                 PCI_ANY_ID,
3045                 0,
3046                 0,
3047                 pbn_b0_1_115200 },
3048
3049         {       PCI_VENDOR_ID_ADDIDATA,
3050                 PCI_DEVICE_ID_ADDIDATA_APCI7800_3,
3051                 PCI_ANY_ID,
3052                 PCI_ANY_ID,
3053                 0,
3054                 0,
3055                 pbn_b0_8_115200 },
3056
3057         /*
3058          * These entries match devices with class COMMUNICATION_SERIAL,
3059          * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
3060          */
3061         {       PCI_ANY_ID, PCI_ANY_ID,
3062                 PCI_ANY_ID, PCI_ANY_ID,
3063                 PCI_CLASS_COMMUNICATION_SERIAL << 8,
3064                 0xffff00, pbn_default },
3065         {       PCI_ANY_ID, PCI_ANY_ID,
3066                 PCI_ANY_ID, PCI_ANY_ID,
3067                 PCI_CLASS_COMMUNICATION_MODEM << 8,
3068                 0xffff00, pbn_default },
3069         {       PCI_ANY_ID, PCI_ANY_ID,
3070                 PCI_ANY_ID, PCI_ANY_ID,
3071                 PCI_CLASS_COMMUNICATION_MULTISERIAL << 8,
3072                 0xffff00, pbn_default },
3073         { 0, }
3074 };
3075
3076 static struct pci_driver serial_pci_driver = {
3077         .name           = "serial",
3078         .probe          = pciserial_init_one,
3079         .remove         = __devexit_p(pciserial_remove_one),
3080 #ifdef CONFIG_PM
3081         .suspend        = pciserial_suspend_one,
3082         .resume         = pciserial_resume_one,
3083 #endif
3084         .id_table       = serial_pci_tbl,
3085 };
3086
3087 static int __init serial8250_pci_init(void)
3088 {
3089         return pci_register_driver(&serial_pci_driver);
3090 }
3091
3092 static void __exit serial8250_pci_exit(void)
3093 {
3094         pci_unregister_driver(&serial_pci_driver);
3095 }
3096
3097 module_init(serial8250_pci_init);
3098 module_exit(serial8250_pci_exit);
3099
3100 MODULE_LICENSE("GPL");
3101 MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module");
3102 MODULE_DEVICE_TABLE(pci, serial_pci_tbl);